]>
Commit | Line | Data |
---|---|---|
b9ede79a MCC |
1 | /* |
2 | * Fujitu mb86a20s ISDB-T/ISDB-Tsb Module driver | |
3 | * | |
37e59f87 | 4 | * Copyright (C) 2010-2013 Mauro Carvalho Chehab |
b9ede79a MCC |
5 | * Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com> |
6 | * | |
b9ede79a MCC |
7 | * This program is free software; you can redistribute it and/or |
8 | * modify it under the terms of the GNU General Public License as | |
9 | * published by the Free Software Foundation version 2. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
14 | * General Public License for more details. | |
15 | */ | |
16 | ||
17 | #include <linux/kernel.h> | |
18 | #include <asm/div64.h> | |
19 | ||
20 | #include "dvb_frontend.h" | |
21 | #include "mb86a20s.h" | |
22 | ||
4f62a20d MCC |
23 | #define NUM_LAYERS 3 |
24 | ||
04fa725e MCC |
25 | enum mb86a20s_bandwidth { |
26 | MB86A20S_13SEG = 0, | |
27 | MB86A20S_13SEG_PARTIAL = 1, | |
28 | MB86A20S_1SEG = 2, | |
29 | MB86A20S_3SEG = 3, | |
30 | }; | |
31 | ||
ce08131c | 32 | static u8 mb86a20s_subchannel[] = { |
04fa725e MCC |
33 | 0xb0, 0xc0, 0xd0, 0xe0, |
34 | 0xf0, 0x00, 0x10, 0x20, | |
35 | }; | |
36 | ||
b9ede79a MCC |
37 | struct mb86a20s_state { |
38 | struct i2c_adapter *i2c; | |
39 | const struct mb86a20s_config *config; | |
09b6d21e | 40 | u32 last_frequency; |
b9ede79a MCC |
41 | |
42 | struct dvb_frontend frontend; | |
c736a5f2 | 43 | |
768e6dad | 44 | u32 if_freq; |
04fa725e MCC |
45 | enum mb86a20s_bandwidth bw; |
46 | bool inversion; | |
47 | u32 subchannel; | |
768e6dad | 48 | |
4f62a20d | 49 | u32 estimated_rate[NUM_LAYERS]; |
0921ecfd | 50 | unsigned long get_strength_time; |
d01a8ee3 | 51 | |
c736a5f2 | 52 | bool need_init; |
b9ede79a MCC |
53 | }; |
54 | ||
55 | struct regdata { | |
56 | u8 reg; | |
57 | u8 data; | |
58 | }; | |
59 | ||
d01a8ee3 MCC |
60 | #define BER_SAMPLING_RATE 1 /* Seconds */ |
61 | ||
b9ede79a MCC |
62 | /* |
63 | * Initialization sequence: Use whatevere default values that PV SBTVD | |
64 | * does on its initialisation, obtained via USB snoop | |
65 | */ | |
768e6dad | 66 | static struct regdata mb86a20s_init1[] = { |
b9ede79a MCC |
67 | { 0x70, 0x0f }, |
68 | { 0x70, 0xff }, | |
69 | { 0x08, 0x01 }, | |
17e67d4c | 70 | { 0x50, 0xd1 }, { 0x51, 0x20 }, |
768e6dad MCC |
71 | }; |
72 | ||
73 | static struct regdata mb86a20s_init2[] = { | |
ebe96749 | 74 | { 0x28, 0x22 }, { 0x29, 0x00 }, { 0x2a, 0x1f }, { 0x2b, 0xf0 }, |
b9ede79a | 75 | { 0x3b, 0x21 }, |
17e67d4c | 76 | { 0x3c, 0x38 }, |
b9ede79a | 77 | { 0x01, 0x0d }, |
17e67d4c | 78 | { 0x04, 0x08 }, { 0x05, 0x03 }, |
a7025edf | 79 | { 0x04, 0x0e }, { 0x05, 0x00 }, |
17e67d4c MCC |
80 | { 0x04, 0x0f }, { 0x05, 0x37 }, |
81 | { 0x04, 0x0b }, { 0x05, 0x78 }, | |
a7025edf | 82 | { 0x04, 0x00 }, { 0x05, 0x00 }, |
17e67d4c MCC |
83 | { 0x04, 0x01 }, { 0x05, 0x1e }, |
84 | { 0x04, 0x02 }, { 0x05, 0x07 }, | |
85 | { 0x04, 0x03 }, { 0x05, 0xd0 }, | |
a7025edf MCC |
86 | { 0x04, 0x09 }, { 0x05, 0x00 }, |
87 | { 0x04, 0x0a }, { 0x05, 0xff }, | |
17e67d4c | 88 | { 0x04, 0x27 }, { 0x05, 0x00 }, |
a7025edf | 89 | { 0x04, 0x28 }, { 0x05, 0x00 }, |
17e67d4c MCC |
90 | { 0x04, 0x1e }, { 0x05, 0x00 }, |
91 | { 0x04, 0x29 }, { 0x05, 0x64 }, | |
92 | { 0x04, 0x32 }, { 0x05, 0x02 }, | |
a7025edf MCC |
93 | { 0x04, 0x14 }, { 0x05, 0x02 }, |
94 | { 0x04, 0x04 }, { 0x05, 0x00 }, | |
95 | { 0x04, 0x05 }, { 0x05, 0x22 }, | |
96 | { 0x04, 0x06 }, { 0x05, 0x0e }, | |
97 | { 0x04, 0x07 }, { 0x05, 0xd8 }, | |
98 | { 0x04, 0x12 }, { 0x05, 0x00 }, | |
99 | { 0x04, 0x13 }, { 0x05, 0xff }, | |
ebe96749 MCC |
100 | { 0x04, 0x15 }, { 0x05, 0x4e }, |
101 | { 0x04, 0x16 }, { 0x05, 0x20 }, | |
09b6d21e MCC |
102 | |
103 | /* | |
104 | * On this demod, when the bit count reaches the count below, | |
105 | * it collects the bit error count. The bit counters are initialized | |
106 | * to 65535 here. This warrants that all of them will be quickly | |
107 | * calculated when device gets locked. As TMCC is parsed, the values | |
d01a8ee3 | 108 | * will be adjusted later in the driver's code. |
09b6d21e MCC |
109 | */ |
110 | { 0x52, 0x01 }, /* Turn on BER before Viterbi */ | |
111 | { 0x50, 0xa7 }, { 0x51, 0x00 }, | |
a7025edf MCC |
112 | { 0x50, 0xa8 }, { 0x51, 0xff }, |
113 | { 0x50, 0xa9 }, { 0x51, 0xff }, | |
09b6d21e | 114 | { 0x50, 0xaa }, { 0x51, 0x00 }, |
a7025edf MCC |
115 | { 0x50, 0xab }, { 0x51, 0xff }, |
116 | { 0x50, 0xac }, { 0x51, 0xff }, | |
09b6d21e | 117 | { 0x50, 0xad }, { 0x51, 0x00 }, |
a7025edf MCC |
118 | { 0x50, 0xae }, { 0x51, 0xff }, |
119 | { 0x50, 0xaf }, { 0x51, 0xff }, | |
09b6d21e | 120 | |
d9b6f08a MCC |
121 | /* |
122 | * On this demod, post BER counts blocks. When the count reaches the | |
123 | * value below, it collects the block error count. The block counters | |
124 | * are initialized to 127 here. This warrants that all of them will be | |
125 | * quickly calculated when device gets locked. As TMCC is parsed, the | |
126 | * values will be adjusted later in the driver's code. | |
127 | */ | |
128 | { 0x5e, 0x07 }, /* Turn on BER after Viterbi */ | |
129 | { 0x50, 0xdc }, { 0x51, 0x00 }, | |
130 | { 0x50, 0xdd }, { 0x51, 0x7f }, | |
131 | { 0x50, 0xde }, { 0x51, 0x00 }, | |
132 | { 0x50, 0xdf }, { 0x51, 0x7f }, | |
133 | { 0x50, 0xe0 }, { 0x51, 0x00 }, | |
134 | { 0x50, 0xe1 }, { 0x51, 0x7f }, | |
593ae89a MCC |
135 | |
136 | /* | |
137 | * On this demod, when the block count reaches the count below, | |
138 | * it collects the block error count. The block counters are initialized | |
139 | * to 127 here. This warrants that all of them will be quickly | |
140 | * calculated when device gets locked. As TMCC is parsed, the values | |
141 | * will be adjusted later in the driver's code. | |
142 | */ | |
143 | { 0x50, 0xb0 }, { 0x51, 0x07 }, /* Enable PER */ | |
144 | { 0x50, 0xb2 }, { 0x51, 0x00 }, | |
145 | { 0x50, 0xb3 }, { 0x51, 0x7f }, | |
146 | { 0x50, 0xb4 }, { 0x51, 0x00 }, | |
147 | { 0x50, 0xb5 }, { 0x51, 0x7f }, | |
148 | { 0x50, 0xb6 }, { 0x51, 0x00 }, | |
149 | { 0x50, 0xb7 }, { 0x51, 0x7f }, | |
25188bd0 MCC |
150 | |
151 | { 0x50, 0x50 }, { 0x51, 0x02 }, /* MER manual mode */ | |
09b6d21e MCC |
152 | { 0x50, 0x51 }, { 0x51, 0x04 }, /* MER symbol 4 */ |
153 | { 0x45, 0x04 }, /* CN symbol 4 */ | |
25188bd0 MCC |
154 | { 0x48, 0x04 }, /* CN manual mode */ |
155 | ||
a7025edf MCC |
156 | { 0x50, 0xd6 }, { 0x51, 0x1f }, |
157 | { 0x50, 0xd2 }, { 0x51, 0x03 }, | |
17e67d4c MCC |
158 | { 0x50, 0xd7 }, { 0x51, 0xbf }, |
159 | { 0x28, 0x74 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0xff }, | |
160 | { 0x28, 0x46 }, { 0x29, 0x00 }, { 0x2a, 0x1a }, { 0x2b, 0x0c }, | |
ce77d120 MCC |
161 | |
162 | { 0x04, 0x40 }, { 0x05, 0x00 }, | |
17e67d4c MCC |
163 | { 0x28, 0x00 }, { 0x2b, 0x08 }, |
164 | { 0x28, 0x05 }, { 0x2b, 0x00 }, | |
b9ede79a | 165 | { 0x1c, 0x01 }, |
17e67d4c MCC |
166 | { 0x28, 0x06 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x1f }, |
167 | { 0x28, 0x07 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x18 }, | |
168 | { 0x28, 0x08 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x12 }, | |
169 | { 0x28, 0x09 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x30 }, | |
170 | { 0x28, 0x0a }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x37 }, | |
171 | { 0x28, 0x0b }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x02 }, | |
172 | { 0x28, 0x0c }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x09 }, | |
173 | { 0x28, 0x0d }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x06 }, | |
174 | { 0x28, 0x0e }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x7b }, | |
175 | { 0x28, 0x0f }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x76 }, | |
176 | { 0x28, 0x10 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x7d }, | |
177 | { 0x28, 0x11 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x08 }, | |
178 | { 0x28, 0x12 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0b }, | |
179 | { 0x28, 0x13 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x00 }, | |
180 | { 0x28, 0x14 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xf2 }, | |
181 | { 0x28, 0x15 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xf3 }, | |
182 | { 0x28, 0x16 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x05 }, | |
183 | { 0x28, 0x17 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x16 }, | |
184 | { 0x28, 0x18 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0f }, | |
185 | { 0x28, 0x19 }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xef }, | |
186 | { 0x28, 0x1a }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xd8 }, | |
187 | { 0x28, 0x1b }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xf1 }, | |
188 | { 0x28, 0x1c }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x3d }, | |
189 | { 0x28, 0x1d }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x94 }, | |
190 | { 0x28, 0x1e }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0xba }, | |
a7025edf MCC |
191 | { 0x50, 0x1e }, { 0x51, 0x5d }, |
192 | { 0x50, 0x22 }, { 0x51, 0x00 }, | |
193 | { 0x50, 0x23 }, { 0x51, 0xc8 }, | |
194 | { 0x50, 0x24 }, { 0x51, 0x00 }, | |
195 | { 0x50, 0x25 }, { 0x51, 0xf0 }, | |
196 | { 0x50, 0x26 }, { 0x51, 0x00 }, | |
197 | { 0x50, 0x27 }, { 0x51, 0xc3 }, | |
198 | { 0x50, 0x39 }, { 0x51, 0x02 }, | |
17e67d4c MCC |
199 | { 0xec, 0x0f }, |
200 | { 0xeb, 0x1f }, | |
ebe96749 | 201 | { 0x28, 0x6a }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x00 }, |
b9ede79a MCC |
202 | { 0xd0, 0x00 }, |
203 | }; | |
204 | ||
205 | static struct regdata mb86a20s_reset_reception[] = { | |
206 | { 0x70, 0xf0 }, | |
207 | { 0x70, 0xff }, | |
208 | { 0x08, 0x01 }, | |
209 | { 0x08, 0x00 }, | |
210 | }; | |
211 | ||
d9b6f08a MCC |
212 | static struct regdata mb86a20s_per_ber_reset[] = { |
213 | { 0x53, 0x00 }, /* pre BER Counter reset */ | |
09b6d21e | 214 | { 0x53, 0x07 }, |
09b6d21e | 215 | |
d9b6f08a MCC |
216 | { 0x5f, 0x00 }, /* post BER Counter reset */ |
217 | { 0x5f, 0x07 }, | |
218 | ||
09b6d21e MCC |
219 | { 0x50, 0xb1 }, /* PER Counter reset */ |
220 | { 0x51, 0x07 }, | |
221 | { 0x51, 0x00 }, | |
222 | }; | |
223 | ||
dd4493ef MCC |
224 | /* |
225 | * I2C read/write functions and macros | |
226 | */ | |
227 | ||
b9ede79a | 228 | static int mb86a20s_i2c_writereg(struct mb86a20s_state *state, |
09b6d21e | 229 | u8 i2c_addr, u8 reg, u8 data) |
b9ede79a MCC |
230 | { |
231 | u8 buf[] = { reg, data }; | |
232 | struct i2c_msg msg = { | |
233 | .addr = i2c_addr, .flags = 0, .buf = buf, .len = 2 | |
234 | }; | |
235 | int rc; | |
236 | ||
237 | rc = i2c_transfer(state->i2c, &msg, 1); | |
238 | if (rc != 1) { | |
f66d81b5 MCC |
239 | dev_err(&state->i2c->dev, |
240 | "%s: writereg error (rc == %i, reg == 0x%02x, data == 0x%02x)\n", | |
241 | __func__, rc, reg, data); | |
b9ede79a MCC |
242 | return rc; |
243 | } | |
244 | ||
245 | return 0; | |
246 | } | |
247 | ||
248 | static int mb86a20s_i2c_writeregdata(struct mb86a20s_state *state, | |
249 | u8 i2c_addr, struct regdata *rd, int size) | |
250 | { | |
251 | int i, rc; | |
252 | ||
253 | for (i = 0; i < size; i++) { | |
254 | rc = mb86a20s_i2c_writereg(state, i2c_addr, rd[i].reg, | |
255 | rd[i].data); | |
256 | if (rc < 0) | |
257 | return rc; | |
258 | } | |
259 | return 0; | |
260 | } | |
261 | ||
262 | static int mb86a20s_i2c_readreg(struct mb86a20s_state *state, | |
263 | u8 i2c_addr, u8 reg) | |
264 | { | |
265 | u8 val; | |
266 | int rc; | |
267 | struct i2c_msg msg[] = { | |
268 | { .addr = i2c_addr, .flags = 0, .buf = ®, .len = 1 }, | |
269 | { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 } | |
270 | }; | |
271 | ||
272 | rc = i2c_transfer(state->i2c, msg, 2); | |
273 | ||
274 | if (rc != 2) { | |
f66d81b5 MCC |
275 | dev_err(&state->i2c->dev, "%s: reg=0x%x (error=%d)\n", |
276 | __func__, reg, rc); | |
277 | return (rc < 0) ? rc : -EIO; | |
b9ede79a MCC |
278 | } |
279 | ||
280 | return val; | |
281 | } | |
282 | ||
283 | #define mb86a20s_readreg(state, reg) \ | |
284 | mb86a20s_i2c_readreg(state, state->config->demod_address, reg) | |
285 | #define mb86a20s_writereg(state, reg, val) \ | |
286 | mb86a20s_i2c_writereg(state, state->config->demod_address, reg, val) | |
287 | #define mb86a20s_writeregdata(state, regdata) \ | |
288 | mb86a20s_i2c_writeregdata(state, state->config->demod_address, \ | |
289 | regdata, ARRAY_SIZE(regdata)) | |
290 | ||
09b6d21e MCC |
291 | /* |
292 | * Ancillary internal routines (likely compiled inlined) | |
293 | * | |
294 | * The functions below assume that gateway lock has already obtained | |
295 | */ | |
296 | ||
0df289a2 | 297 | static int mb86a20s_read_status(struct dvb_frontend *fe, enum fe_status *status) |
b9ede79a MCC |
298 | { |
299 | struct mb86a20s_state *state = fe->demodulator_priv; | |
dd4493ef | 300 | int val; |
b9ede79a | 301 | |
dd4493ef | 302 | *status = 0; |
b9ede79a | 303 | |
dd4493ef MCC |
304 | val = mb86a20s_readreg(state, 0x0a) & 0xf; |
305 | if (val < 0) | |
306 | return val; | |
68541cda | 307 | |
dd4493ef MCC |
308 | if (val >= 2) |
309 | *status |= FE_HAS_SIGNAL; | |
b9ede79a | 310 | |
dd4493ef MCC |
311 | if (val >= 4) |
312 | *status |= FE_HAS_CARRIER; | |
7572f9c5 | 313 | |
dd4493ef MCC |
314 | if (val >= 5) |
315 | *status |= FE_HAS_VITERBI; | |
7572f9c5 | 316 | |
dd4493ef MCC |
317 | if (val >= 7) |
318 | *status |= FE_HAS_SYNC; | |
68541cda | 319 | |
dd4493ef MCC |
320 | if (val >= 8) /* Maybe 9? */ |
321 | *status |= FE_HAS_LOCK; | |
322 | ||
f66d81b5 MCC |
323 | dev_dbg(&state->i2c->dev, "%s: Status = 0x%02x (state = %d)\n", |
324 | __func__, *status, val); | |
dd4493ef | 325 | |
15b1c5a0 | 326 | return val; |
b9ede79a MCC |
327 | } |
328 | ||
09b6d21e | 329 | static int mb86a20s_read_signal_strength(struct dvb_frontend *fe) |
b9ede79a MCC |
330 | { |
331 | struct mb86a20s_state *state = fe->demodulator_priv; | |
0921ecfd | 332 | struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
09b6d21e | 333 | int rc; |
b9ede79a | 334 | unsigned rf_max, rf_min, rf; |
68541cda | 335 | |
0921ecfd MCC |
336 | if (state->get_strength_time && |
337 | (!time_after(jiffies, state->get_strength_time))) | |
338 | return c->strength.stat[0].uvalue; | |
339 | ||
340 | /* Reset its value if an error happen */ | |
341 | c->strength.stat[0].uvalue = 0; | |
342 | ||
b9ede79a MCC |
343 | /* Does a binary search to get RF strength */ |
344 | rf_max = 0xfff; | |
345 | rf_min = 0; | |
346 | do { | |
347 | rf = (rf_max + rf_min) / 2; | |
09b6d21e MCC |
348 | rc = mb86a20s_writereg(state, 0x04, 0x1f); |
349 | if (rc < 0) | |
350 | return rc; | |
351 | rc = mb86a20s_writereg(state, 0x05, rf >> 8); | |
352 | if (rc < 0) | |
353 | return rc; | |
354 | rc = mb86a20s_writereg(state, 0x04, 0x20); | |
355 | if (rc < 0) | |
356 | return rc; | |
dad78c56 | 357 | rc = mb86a20s_writereg(state, 0x05, rf); |
09b6d21e MCC |
358 | if (rc < 0) |
359 | return rc; | |
b9ede79a | 360 | |
09b6d21e MCC |
361 | rc = mb86a20s_readreg(state, 0x02); |
362 | if (rc < 0) | |
363 | return rc; | |
364 | if (rc & 0x08) | |
b9ede79a MCC |
365 | rf_min = (rf_max + rf_min) / 2; |
366 | else | |
367 | rf_max = (rf_max + rf_min) / 2; | |
368 | if (rf_max - rf_min < 4) { | |
09b6d21e MCC |
369 | rf = (rf_max + rf_min) / 2; |
370 | ||
371 | /* Rescale it from 2^12 (4096) to 2^16 */ | |
0921ecfd MCC |
372 | rf = rf << (16 - 12); |
373 | if (rf) | |
374 | rf |= (1 << 12) - 1; | |
375 | ||
f66d81b5 MCC |
376 | dev_dbg(&state->i2c->dev, |
377 | "%s: signal strength = %d (%d < RF=%d < %d)\n", | |
378 | __func__, rf, rf_min, rf >> 4, rf_max); | |
0921ecfd MCC |
379 | c->strength.stat[0].uvalue = rf; |
380 | state->get_strength_time = jiffies + | |
381 | msecs_to_jiffies(1000); | |
382 | return 0; | |
b9ede79a MCC |
383 | } |
384 | } while (1); | |
b9ede79a MCC |
385 | } |
386 | ||
959a119f MCC |
387 | static int mb86a20s_get_modulation(struct mb86a20s_state *state, |
388 | unsigned layer) | |
389 | { | |
390 | int rc; | |
391 | static unsigned char reg[] = { | |
392 | [0] = 0x86, /* Layer A */ | |
393 | [1] = 0x8a, /* Layer B */ | |
394 | [2] = 0x8e, /* Layer C */ | |
395 | }; | |
396 | ||
82033bc5 | 397 | if (layer >= ARRAY_SIZE(reg)) |
959a119f MCC |
398 | return -EINVAL; |
399 | rc = mb86a20s_writereg(state, 0x6d, reg[layer]); | |
400 | if (rc < 0) | |
401 | return rc; | |
402 | rc = mb86a20s_readreg(state, 0x6e); | |
403 | if (rc < 0) | |
404 | return rc; | |
04585921 | 405 | switch ((rc >> 4) & 0x07) { |
959a119f MCC |
406 | case 0: |
407 | return DQPSK; | |
408 | case 1: | |
409 | return QPSK; | |
410 | case 2: | |
411 | return QAM_16; | |
412 | case 3: | |
413 | return QAM_64; | |
414 | default: | |
415 | return QAM_AUTO; | |
416 | } | |
417 | } | |
418 | ||
419 | static int mb86a20s_get_fec(struct mb86a20s_state *state, | |
420 | unsigned layer) | |
421 | { | |
422 | int rc; | |
423 | ||
424 | static unsigned char reg[] = { | |
425 | [0] = 0x87, /* Layer A */ | |
426 | [1] = 0x8b, /* Layer B */ | |
427 | [2] = 0x8f, /* Layer C */ | |
428 | }; | |
429 | ||
82033bc5 | 430 | if (layer >= ARRAY_SIZE(reg)) |
959a119f MCC |
431 | return -EINVAL; |
432 | rc = mb86a20s_writereg(state, 0x6d, reg[layer]); | |
433 | if (rc < 0) | |
434 | return rc; | |
435 | rc = mb86a20s_readreg(state, 0x6e); | |
436 | if (rc < 0) | |
437 | return rc; | |
04585921 | 438 | switch ((rc >> 4) & 0x07) { |
959a119f MCC |
439 | case 0: |
440 | return FEC_1_2; | |
441 | case 1: | |
442 | return FEC_2_3; | |
443 | case 2: | |
444 | return FEC_3_4; | |
445 | case 3: | |
446 | return FEC_5_6; | |
447 | case 4: | |
448 | return FEC_7_8; | |
449 | default: | |
450 | return FEC_AUTO; | |
451 | } | |
452 | } | |
453 | ||
454 | static int mb86a20s_get_interleaving(struct mb86a20s_state *state, | |
455 | unsigned layer) | |
456 | { | |
457 | int rc; | |
4247368b MCC |
458 | int interleaving[] = { |
459 | 0, 1, 2, 4, 8 | |
460 | }; | |
959a119f MCC |
461 | |
462 | static unsigned char reg[] = { | |
463 | [0] = 0x88, /* Layer A */ | |
464 | [1] = 0x8c, /* Layer B */ | |
465 | [2] = 0x90, /* Layer C */ | |
466 | }; | |
467 | ||
82033bc5 | 468 | if (layer >= ARRAY_SIZE(reg)) |
959a119f MCC |
469 | return -EINVAL; |
470 | rc = mb86a20s_writereg(state, 0x6d, reg[layer]); | |
471 | if (rc < 0) | |
472 | return rc; | |
473 | rc = mb86a20s_readreg(state, 0x6e); | |
474 | if (rc < 0) | |
475 | return rc; | |
04585921 | 476 | |
4247368b | 477 | return interleaving[(rc >> 4) & 0x07]; |
959a119f MCC |
478 | } |
479 | ||
480 | static int mb86a20s_get_segment_count(struct mb86a20s_state *state, | |
481 | unsigned layer) | |
482 | { | |
483 | int rc, count; | |
959a119f MCC |
484 | static unsigned char reg[] = { |
485 | [0] = 0x89, /* Layer A */ | |
486 | [1] = 0x8d, /* Layer B */ | |
487 | [2] = 0x91, /* Layer C */ | |
488 | }; | |
489 | ||
f66d81b5 MCC |
490 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); |
491 | ||
82033bc5 | 492 | if (layer >= ARRAY_SIZE(reg)) |
959a119f | 493 | return -EINVAL; |
f66d81b5 | 494 | |
959a119f MCC |
495 | rc = mb86a20s_writereg(state, 0x6d, reg[layer]); |
496 | if (rc < 0) | |
497 | return rc; | |
498 | rc = mb86a20s_readreg(state, 0x6e); | |
499 | if (rc < 0) | |
500 | return rc; | |
501 | count = (rc >> 4) & 0x0f; | |
502 | ||
f66d81b5 MCC |
503 | dev_dbg(&state->i2c->dev, "%s: segments: %d.\n", __func__, count); |
504 | ||
959a119f MCC |
505 | return count; |
506 | } | |
507 | ||
a77cfcac MCC |
508 | static void mb86a20s_reset_frontend_cache(struct dvb_frontend *fe) |
509 | { | |
f66d81b5 | 510 | struct mb86a20s_state *state = fe->demodulator_priv; |
a77cfcac MCC |
511 | struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
512 | ||
f66d81b5 MCC |
513 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); |
514 | ||
a77cfcac MCC |
515 | /* Fixed parameters */ |
516 | c->delivery_system = SYS_ISDBT; | |
517 | c->bandwidth_hz = 6000000; | |
518 | ||
519 | /* Initialize values that will be later autodetected */ | |
520 | c->isdbt_layer_enabled = 0; | |
521 | c->transmission_mode = TRANSMISSION_MODE_AUTO; | |
522 | c->guard_interval = GUARD_INTERVAL_AUTO; | |
523 | c->isdbt_sb_mode = 0; | |
524 | c->isdbt_sb_segment_count = 0; | |
525 | } | |
526 | ||
d01a8ee3 MCC |
527 | /* |
528 | * Estimates the bit rate using the per-segment bit rate given by | |
529 | * ABNT/NBR 15601 spec (table 4). | |
530 | */ | |
531 | static u32 isdbt_rate[3][5][4] = { | |
532 | { /* DQPSK/QPSK */ | |
533 | { 280850, 312060, 330420, 340430 }, /* 1/2 */ | |
534 | { 374470, 416080, 440560, 453910 }, /* 2/3 */ | |
535 | { 421280, 468090, 495630, 510650 }, /* 3/4 */ | |
536 | { 468090, 520100, 550700, 567390 }, /* 5/6 */ | |
537 | { 491500, 546110, 578230, 595760 }, /* 7/8 */ | |
538 | }, { /* QAM16 */ | |
539 | { 561710, 624130, 660840, 680870 }, /* 1/2 */ | |
540 | { 748950, 832170, 881120, 907820 }, /* 2/3 */ | |
541 | { 842570, 936190, 991260, 1021300 }, /* 3/4 */ | |
542 | { 936190, 1040210, 1101400, 1134780 }, /* 5/6 */ | |
543 | { 983000, 1092220, 1156470, 1191520 }, /* 7/8 */ | |
544 | }, { /* QAM64 */ | |
545 | { 842570, 936190, 991260, 1021300 }, /* 1/2 */ | |
546 | { 1123430, 1248260, 1321680, 1361740 }, /* 2/3 */ | |
547 | { 1263860, 1404290, 1486900, 1531950 }, /* 3/4 */ | |
548 | { 1404290, 1560320, 1652110, 1702170 }, /* 5/6 */ | |
549 | { 1474500, 1638340, 1734710, 1787280 }, /* 7/8 */ | |
550 | } | |
551 | }; | |
552 | ||
553 | static void mb86a20s_layer_bitrate(struct dvb_frontend *fe, u32 layer, | |
0562aef2 | 554 | u32 modulation, u32 forward_error_correction, |
277bfd2f | 555 | u32 guard_interval, |
d01a8ee3 MCC |
556 | u32 segment) |
557 | { | |
558 | struct mb86a20s_state *state = fe->demodulator_priv; | |
559 | u32 rate; | |
0562aef2 | 560 | int mod, fec, guard; |
d01a8ee3 MCC |
561 | |
562 | /* | |
277bfd2f | 563 | * If modulation/fec/guard is not detected, the default is |
d01a8ee3 MCC |
564 | * to consider the lowest bit rate, to avoid taking too long time |
565 | * to get BER. | |
566 | */ | |
567 | switch (modulation) { | |
568 | case DQPSK: | |
569 | case QPSK: | |
570 | default: | |
0562aef2 | 571 | mod = 0; |
d01a8ee3 MCC |
572 | break; |
573 | case QAM_16: | |
0562aef2 | 574 | mod = 1; |
d01a8ee3 MCC |
575 | break; |
576 | case QAM_64: | |
0562aef2 | 577 | mod = 2; |
d01a8ee3 MCC |
578 | break; |
579 | } | |
580 | ||
0562aef2 | 581 | switch (forward_error_correction) { |
d01a8ee3 MCC |
582 | default: |
583 | case FEC_1_2: | |
584 | case FEC_AUTO: | |
0562aef2 | 585 | fec = 0; |
d01a8ee3 MCC |
586 | break; |
587 | case FEC_2_3: | |
0562aef2 | 588 | fec = 1; |
d01a8ee3 MCC |
589 | break; |
590 | case FEC_3_4: | |
0562aef2 | 591 | fec = 2; |
d01a8ee3 MCC |
592 | break; |
593 | case FEC_5_6: | |
0562aef2 | 594 | fec = 3; |
d01a8ee3 MCC |
595 | break; |
596 | case FEC_7_8: | |
0562aef2 | 597 | fec = 4; |
d01a8ee3 MCC |
598 | break; |
599 | } | |
600 | ||
277bfd2f | 601 | switch (guard_interval) { |
d01a8ee3 MCC |
602 | default: |
603 | case GUARD_INTERVAL_1_4: | |
0562aef2 | 604 | guard = 0; |
d01a8ee3 MCC |
605 | break; |
606 | case GUARD_INTERVAL_1_8: | |
0562aef2 | 607 | guard = 1; |
d01a8ee3 MCC |
608 | break; |
609 | case GUARD_INTERVAL_1_16: | |
0562aef2 | 610 | guard = 2; |
d01a8ee3 MCC |
611 | break; |
612 | case GUARD_INTERVAL_1_32: | |
0562aef2 | 613 | guard = 3; |
d01a8ee3 MCC |
614 | break; |
615 | } | |
616 | ||
617 | /* Samples BER at BER_SAMPLING_RATE seconds */ | |
0562aef2 | 618 | rate = isdbt_rate[mod][fec][guard] * segment * BER_SAMPLING_RATE; |
d01a8ee3 MCC |
619 | |
620 | /* Avoids sampling too quickly or to overflow the register */ | |
621 | if (rate < 256) | |
622 | rate = 256; | |
623 | else if (rate > (1 << 24) - 1) | |
624 | rate = (1 << 24) - 1; | |
625 | ||
626 | dev_dbg(&state->i2c->dev, | |
627 | "%s: layer %c bitrate: %d kbps; counter = %d (0x%06x)\n", | |
0562aef2 MCC |
628 | __func__, 'A' + layer, |
629 | segment * isdbt_rate[mod][fec][guard]/1000, | |
d01a8ee3 MCC |
630 | rate, rate); |
631 | ||
b1f89331 | 632 | state->estimated_rate[layer] = rate; |
d01a8ee3 MCC |
633 | } |
634 | ||
7c61d80a | 635 | static int mb86a20s_get_frontend(struct dvb_frontend *fe) |
b9ede79a | 636 | { |
959a119f | 637 | struct mb86a20s_state *state = fe->demodulator_priv; |
a77cfcac | 638 | struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
5cb88ca8 | 639 | int layer, rc; |
b9ede79a | 640 | |
f66d81b5 MCC |
641 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); |
642 | ||
a77cfcac MCC |
643 | /* Reset frontend cache to default values */ |
644 | mb86a20s_reset_frontend_cache(fe); | |
959a119f | 645 | |
959a119f MCC |
646 | /* Check for partial reception */ |
647 | rc = mb86a20s_writereg(state, 0x6d, 0x85); | |
a77cfcac MCC |
648 | if (rc < 0) |
649 | return rc; | |
650 | rc = mb86a20s_readreg(state, 0x6e); | |
651 | if (rc < 0) | |
652 | return rc; | |
653 | c->isdbt_partial_reception = (rc & 0x10) ? 1 : 0; | |
959a119f MCC |
654 | |
655 | /* Get per-layer data */ | |
a77cfcac | 656 | |
5cb88ca8 | 657 | for (layer = 0; layer < NUM_LAYERS; layer++) { |
f66d81b5 | 658 | dev_dbg(&state->i2c->dev, "%s: getting data for layer %c.\n", |
5cb88ca8 | 659 | __func__, 'A' + layer); |
f66d81b5 | 660 | |
5cb88ca8 | 661 | rc = mb86a20s_get_segment_count(state, layer); |
a77cfcac | 662 | if (rc < 0) |
f66d81b5 | 663 | goto noperlayer_error; |
d01a8ee3 | 664 | if (rc >= 0 && rc < 14) { |
5cb88ca8 | 665 | c->layer[layer].segment_count = rc; |
d01a8ee3 | 666 | } else { |
5cb88ca8 MCC |
667 | c->layer[layer].segment_count = 0; |
668 | state->estimated_rate[layer] = 0; | |
959a119f | 669 | continue; |
a77cfcac | 670 | } |
5cb88ca8 MCC |
671 | c->isdbt_layer_enabled |= 1 << layer; |
672 | rc = mb86a20s_get_modulation(state, layer); | |
a77cfcac | 673 | if (rc < 0) |
f66d81b5 MCC |
674 | goto noperlayer_error; |
675 | dev_dbg(&state->i2c->dev, "%s: modulation %d.\n", | |
676 | __func__, rc); | |
5cb88ca8 MCC |
677 | c->layer[layer].modulation = rc; |
678 | rc = mb86a20s_get_fec(state, layer); | |
a77cfcac | 679 | if (rc < 0) |
f66d81b5 MCC |
680 | goto noperlayer_error; |
681 | dev_dbg(&state->i2c->dev, "%s: FEC %d.\n", | |
682 | __func__, rc); | |
5cb88ca8 MCC |
683 | c->layer[layer].fec = rc; |
684 | rc = mb86a20s_get_interleaving(state, layer); | |
a77cfcac | 685 | if (rc < 0) |
f66d81b5 MCC |
686 | goto noperlayer_error; |
687 | dev_dbg(&state->i2c->dev, "%s: interleaving %d.\n", | |
688 | __func__, rc); | |
5cb88ca8 MCC |
689 | c->layer[layer].interleaving = rc; |
690 | mb86a20s_layer_bitrate(fe, layer, c->layer[layer].modulation, | |
691 | c->layer[layer].fec, | |
277bfd2f | 692 | c->guard_interval, |
5cb88ca8 | 693 | c->layer[layer].segment_count); |
959a119f MCC |
694 | } |
695 | ||
959a119f | 696 | rc = mb86a20s_writereg(state, 0x6d, 0x84); |
a77cfcac MCC |
697 | if (rc < 0) |
698 | return rc; | |
699 | if ((rc & 0x60) == 0x20) { | |
700 | c->isdbt_sb_mode = 1; | |
959a119f | 701 | /* At least, one segment should exist */ |
a77cfcac MCC |
702 | if (!c->isdbt_sb_segment_count) |
703 | c->isdbt_sb_segment_count = 1; | |
704 | } | |
959a119f MCC |
705 | |
706 | /* Get transmission mode and guard interval */ | |
959a119f | 707 | rc = mb86a20s_readreg(state, 0x07); |
a77cfcac MCC |
708 | if (rc < 0) |
709 | return rc; | |
276dfc4b | 710 | c->transmission_mode = TRANSMISSION_MODE_AUTO; |
a77cfcac | 711 | if ((rc & 0x60) == 0x20) { |
276dfc4b MCC |
712 | /* Only modes 2 and 3 are supported */ |
713 | switch ((rc >> 2) & 0x03) { | |
a77cfcac MCC |
714 | case 1: |
715 | c->transmission_mode = TRANSMISSION_MODE_4K; | |
716 | break; | |
717 | case 2: | |
718 | c->transmission_mode = TRANSMISSION_MODE_8K; | |
719 | break; | |
959a119f | 720 | } |
a77cfcac | 721 | } |
276dfc4b | 722 | c->guard_interval = GUARD_INTERVAL_AUTO; |
a77cfcac | 723 | if (!(rc & 0x10)) { |
276dfc4b | 724 | /* Guard interval 1/32 is not supported */ |
a77cfcac MCC |
725 | switch (rc & 0x3) { |
726 | case 0: | |
727 | c->guard_interval = GUARD_INTERVAL_1_4; | |
728 | break; | |
729 | case 1: | |
730 | c->guard_interval = GUARD_INTERVAL_1_8; | |
731 | break; | |
732 | case 2: | |
733 | c->guard_interval = GUARD_INTERVAL_1_16; | |
734 | break; | |
959a119f MCC |
735 | } |
736 | } | |
09b6d21e | 737 | return 0; |
959a119f | 738 | |
f66d81b5 | 739 | noperlayer_error: |
b9ede79a | 740 | |
09b6d21e MCC |
741 | /* per-layer info is incomplete; discard all per-layer */ |
742 | c->isdbt_layer_enabled = 0; | |
743 | ||
744 | return rc; | |
745 | } | |
746 | ||
747 | static int mb86a20s_reset_counters(struct dvb_frontend *fe) | |
748 | { | |
749 | struct mb86a20s_state *state = fe->demodulator_priv; | |
750 | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
751 | int rc, val; | |
752 | ||
753 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); | |
754 | ||
755 | /* Reset the counters, if the channel changed */ | |
756 | if (state->last_frequency != c->frequency) { | |
09b6d21e MCC |
757 | memset(&c->cnr, 0, sizeof(c->cnr)); |
758 | memset(&c->pre_bit_error, 0, sizeof(c->pre_bit_error)); | |
759 | memset(&c->pre_bit_count, 0, sizeof(c->pre_bit_count)); | |
d9b6f08a MCC |
760 | memset(&c->post_bit_error, 0, sizeof(c->post_bit_error)); |
761 | memset(&c->post_bit_count, 0, sizeof(c->post_bit_count)); | |
09b6d21e MCC |
762 | memset(&c->block_error, 0, sizeof(c->block_error)); |
763 | memset(&c->block_count, 0, sizeof(c->block_count)); | |
764 | ||
765 | state->last_frequency = c->frequency; | |
766 | } | |
767 | ||
768 | /* Clear status for most stats */ | |
769 | ||
d9b6f08a MCC |
770 | /* BER/PER counter reset */ |
771 | rc = mb86a20s_writeregdata(state, mb86a20s_per_ber_reset); | |
09b6d21e MCC |
772 | if (rc < 0) |
773 | goto err; | |
774 | ||
775 | /* CNR counter reset */ | |
776 | rc = mb86a20s_readreg(state, 0x45); | |
777 | if (rc < 0) | |
778 | goto err; | |
779 | val = rc; | |
780 | rc = mb86a20s_writereg(state, 0x45, val | 0x10); | |
781 | if (rc < 0) | |
782 | goto err; | |
783 | rc = mb86a20s_writereg(state, 0x45, val & 0x6f); | |
784 | if (rc < 0) | |
785 | goto err; | |
786 | ||
787 | /* MER counter reset */ | |
788 | rc = mb86a20s_writereg(state, 0x50, 0x50); | |
789 | if (rc < 0) | |
790 | goto err; | |
791 | rc = mb86a20s_readreg(state, 0x51); | |
792 | if (rc < 0) | |
793 | goto err; | |
794 | val = rc; | |
795 | rc = mb86a20s_writereg(state, 0x51, val | 0x01); | |
796 | if (rc < 0) | |
797 | goto err; | |
798 | rc = mb86a20s_writereg(state, 0x51, val & 0x06); | |
799 | if (rc < 0) | |
800 | goto err; | |
801 | ||
149d518a | 802 | goto ok; |
09b6d21e | 803 | err: |
149d518a MCC |
804 | dev_err(&state->i2c->dev, |
805 | "%s: Can't reset FE statistics (error %d).\n", | |
806 | __func__, rc); | |
807 | ok: | |
a77cfcac | 808 | return rc; |
09b6d21e MCC |
809 | } |
810 | ||
ad0abbf1 MCC |
811 | static int mb86a20s_get_pre_ber(struct dvb_frontend *fe, |
812 | unsigned layer, | |
813 | u32 *error, u32 *count) | |
149d518a MCC |
814 | { |
815 | struct mb86a20s_state *state = fe->demodulator_priv; | |
ad0abbf1 | 816 | int rc, val; |
149d518a MCC |
817 | |
818 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); | |
819 | ||
4f62a20d | 820 | if (layer >= NUM_LAYERS) |
149d518a MCC |
821 | return -EINVAL; |
822 | ||
823 | /* Check if the BER measures are already available */ | |
824 | rc = mb86a20s_readreg(state, 0x54); | |
825 | if (rc < 0) | |
826 | return rc; | |
827 | ||
828 | /* Check if data is available for that layer */ | |
829 | if (!(rc & (1 << layer))) { | |
830 | dev_dbg(&state->i2c->dev, | |
ad0abbf1 | 831 | "%s: preBER for layer %c is not available yet.\n", |
149d518a MCC |
832 | __func__, 'A' + layer); |
833 | return -EBUSY; | |
834 | } | |
835 | ||
836 | /* Read Bit Error Count */ | |
837 | rc = mb86a20s_readreg(state, 0x55 + layer * 3); | |
838 | if (rc < 0) | |
839 | return rc; | |
840 | *error = rc << 16; | |
841 | rc = mb86a20s_readreg(state, 0x56 + layer * 3); | |
842 | if (rc < 0) | |
843 | return rc; | |
844 | *error |= rc << 8; | |
845 | rc = mb86a20s_readreg(state, 0x57 + layer * 3); | |
846 | if (rc < 0) | |
847 | return rc; | |
848 | *error |= rc; | |
849 | ||
850 | dev_dbg(&state->i2c->dev, | |
851 | "%s: bit error before Viterbi for layer %c: %d.\n", | |
852 | __func__, 'A' + layer, *error); | |
853 | ||
854 | /* Read Bit Count */ | |
855 | rc = mb86a20s_writereg(state, 0x50, 0xa7 + layer * 3); | |
856 | if (rc < 0) | |
857 | return rc; | |
858 | rc = mb86a20s_readreg(state, 0x51); | |
859 | if (rc < 0) | |
860 | return rc; | |
861 | *count = rc << 16; | |
862 | rc = mb86a20s_writereg(state, 0x50, 0xa8 + layer * 3); | |
863 | if (rc < 0) | |
864 | return rc; | |
865 | rc = mb86a20s_readreg(state, 0x51); | |
866 | if (rc < 0) | |
867 | return rc; | |
868 | *count |= rc << 8; | |
869 | rc = mb86a20s_writereg(state, 0x50, 0xa9 + layer * 3); | |
870 | if (rc < 0) | |
871 | return rc; | |
872 | rc = mb86a20s_readreg(state, 0x51); | |
873 | if (rc < 0) | |
874 | return rc; | |
875 | *count |= rc; | |
876 | ||
877 | dev_dbg(&state->i2c->dev, | |
878 | "%s: bit count before Viterbi for layer %c: %d.\n", | |
879 | __func__, 'A' + layer, *count); | |
880 | ||
881 | ||
d01a8ee3 MCC |
882 | /* |
883 | * As we get TMCC data from the frontend, we can better estimate the | |
884 | * BER bit counters, in order to do the BER measure during a longer | |
885 | * time. Use those data, if available, to update the bit count | |
886 | * measure. | |
887 | */ | |
888 | ||
889 | if (state->estimated_rate[layer] | |
890 | && state->estimated_rate[layer] != *count) { | |
891 | dev_dbg(&state->i2c->dev, | |
ad0abbf1 | 892 | "%s: updating layer %c preBER counter to %d.\n", |
d01a8ee3 | 893 | __func__, 'A' + layer, state->estimated_rate[layer]); |
ad0abbf1 MCC |
894 | |
895 | /* Turn off BER before Viterbi */ | |
896 | rc = mb86a20s_writereg(state, 0x52, 0x00); | |
897 | ||
898 | /* Update counter for this layer */ | |
d01a8ee3 MCC |
899 | rc = mb86a20s_writereg(state, 0x50, 0xa7 + layer * 3); |
900 | if (rc < 0) | |
901 | return rc; | |
902 | rc = mb86a20s_writereg(state, 0x51, | |
903 | state->estimated_rate[layer] >> 16); | |
904 | if (rc < 0) | |
905 | return rc; | |
906 | rc = mb86a20s_writereg(state, 0x50, 0xa8 + layer * 3); | |
907 | if (rc < 0) | |
908 | return rc; | |
909 | rc = mb86a20s_writereg(state, 0x51, | |
910 | state->estimated_rate[layer] >> 8); | |
911 | if (rc < 0) | |
912 | return rc; | |
913 | rc = mb86a20s_writereg(state, 0x50, 0xa9 + layer * 3); | |
914 | if (rc < 0) | |
915 | return rc; | |
916 | rc = mb86a20s_writereg(state, 0x51, | |
917 | state->estimated_rate[layer]); | |
918 | if (rc < 0) | |
919 | return rc; | |
ad0abbf1 MCC |
920 | |
921 | /* Turn on BER before Viterbi */ | |
922 | rc = mb86a20s_writereg(state, 0x52, 0x01); | |
923 | ||
924 | /* Reset all preBER counters */ | |
925 | rc = mb86a20s_writereg(state, 0x53, 0x00); | |
926 | if (rc < 0) | |
927 | return rc; | |
928 | rc = mb86a20s_writereg(state, 0x53, 0x07); | |
929 | } else { | |
930 | /* Reset counter to collect new data */ | |
931 | rc = mb86a20s_readreg(state, 0x53); | |
932 | if (rc < 0) | |
933 | return rc; | |
934 | val = rc; | |
935 | rc = mb86a20s_writereg(state, 0x53, val & ~(1 << layer)); | |
936 | if (rc < 0) | |
937 | return rc; | |
938 | rc = mb86a20s_writereg(state, 0x53, val | (1 << layer)); | |
d01a8ee3 MCC |
939 | } |
940 | ||
d9b6f08a MCC |
941 | return rc; |
942 | } | |
943 | ||
944 | static int mb86a20s_get_post_ber(struct dvb_frontend *fe, | |
945 | unsigned layer, | |
946 | u32 *error, u32 *count) | |
947 | { | |
948 | struct mb86a20s_state *state = fe->demodulator_priv; | |
949 | u32 counter, collect_rate; | |
950 | int rc, val; | |
951 | ||
952 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); | |
953 | ||
4f62a20d | 954 | if (layer >= NUM_LAYERS) |
d9b6f08a MCC |
955 | return -EINVAL; |
956 | ||
957 | /* Check if the BER measures are already available */ | |
958 | rc = mb86a20s_readreg(state, 0x60); | |
959 | if (rc < 0) | |
960 | return rc; | |
961 | ||
962 | /* Check if data is available for that layer */ | |
963 | if (!(rc & (1 << layer))) { | |
964 | dev_dbg(&state->i2c->dev, | |
965 | "%s: post BER for layer %c is not available yet.\n", | |
966 | __func__, 'A' + layer); | |
967 | return -EBUSY; | |
968 | } | |
d01a8ee3 | 969 | |
d9b6f08a MCC |
970 | /* Read Bit Error Count */ |
971 | rc = mb86a20s_readreg(state, 0x64 + layer * 3); | |
972 | if (rc < 0) | |
973 | return rc; | |
974 | *error = rc << 16; | |
975 | rc = mb86a20s_readreg(state, 0x65 + layer * 3); | |
976 | if (rc < 0) | |
977 | return rc; | |
978 | *error |= rc << 8; | |
979 | rc = mb86a20s_readreg(state, 0x66 + layer * 3); | |
980 | if (rc < 0) | |
981 | return rc; | |
982 | *error |= rc; | |
983 | ||
984 | dev_dbg(&state->i2c->dev, | |
985 | "%s: post bit error for layer %c: %d.\n", | |
986 | __func__, 'A' + layer, *error); | |
987 | ||
988 | /* Read Bit Count */ | |
989 | rc = mb86a20s_writereg(state, 0x50, 0xdc + layer * 2); | |
990 | if (rc < 0) | |
991 | return rc; | |
992 | rc = mb86a20s_readreg(state, 0x51); | |
993 | if (rc < 0) | |
994 | return rc; | |
995 | counter = rc << 8; | |
996 | rc = mb86a20s_writereg(state, 0x50, 0xdd + layer * 2); | |
997 | if (rc < 0) | |
998 | return rc; | |
999 | rc = mb86a20s_readreg(state, 0x51); | |
1000 | if (rc < 0) | |
1001 | return rc; | |
1002 | counter |= rc; | |
1003 | *count = counter * 204 * 8; | |
1004 | ||
1005 | dev_dbg(&state->i2c->dev, | |
1006 | "%s: post bit count for layer %c: %d.\n", | |
1007 | __func__, 'A' + layer, *count); | |
1008 | ||
1009 | /* | |
1010 | * As we get TMCC data from the frontend, we can better estimate the | |
1011 | * BER bit counters, in order to do the BER measure during a longer | |
1012 | * time. Use those data, if available, to update the bit count | |
1013 | * measure. | |
1014 | */ | |
1015 | ||
1016 | if (!state->estimated_rate[layer]) | |
1017 | goto reset_measurement; | |
1018 | ||
1019 | collect_rate = state->estimated_rate[layer] / 204 / 8; | |
1020 | if (collect_rate < 32) | |
1021 | collect_rate = 32; | |
1022 | if (collect_rate > 65535) | |
1023 | collect_rate = 65535; | |
1024 | if (collect_rate != counter) { | |
1025 | dev_dbg(&state->i2c->dev, | |
1026 | "%s: updating postBER counter on layer %c to %d.\n", | |
1027 | __func__, 'A' + layer, collect_rate); | |
1028 | ||
1029 | /* Turn off BER after Viterbi */ | |
1030 | rc = mb86a20s_writereg(state, 0x5e, 0x00); | |
1031 | ||
1032 | /* Update counter for this layer */ | |
1033 | rc = mb86a20s_writereg(state, 0x50, 0xdc + layer * 2); | |
1034 | if (rc < 0) | |
1035 | return rc; | |
1036 | rc = mb86a20s_writereg(state, 0x51, collect_rate >> 8); | |
1037 | if (rc < 0) | |
1038 | return rc; | |
1039 | rc = mb86a20s_writereg(state, 0x50, 0xdd + layer * 2); | |
1040 | if (rc < 0) | |
1041 | return rc; | |
1042 | rc = mb86a20s_writereg(state, 0x51, collect_rate & 0xff); | |
1043 | if (rc < 0) | |
1044 | return rc; | |
1045 | ||
1046 | /* Turn on BER after Viterbi */ | |
1047 | rc = mb86a20s_writereg(state, 0x5e, 0x07); | |
1048 | ||
1049 | /* Reset all preBER counters */ | |
1050 | rc = mb86a20s_writereg(state, 0x5f, 0x00); | |
1051 | if (rc < 0) | |
1052 | return rc; | |
1053 | rc = mb86a20s_writereg(state, 0x5f, 0x07); | |
1054 | ||
1055 | return rc; | |
1056 | } | |
1057 | ||
1058 | reset_measurement: | |
149d518a | 1059 | /* Reset counter to collect new data */ |
ad0abbf1 MCC |
1060 | rc = mb86a20s_readreg(state, 0x5f); |
1061 | if (rc < 0) | |
1062 | return rc; | |
1063 | val = rc; | |
1064 | rc = mb86a20s_writereg(state, 0x5f, val & ~(1 << layer)); | |
149d518a MCC |
1065 | if (rc < 0) |
1066 | return rc; | |
d9b6f08a | 1067 | rc = mb86a20s_writereg(state, 0x5f, val | (1 << layer)); |
149d518a | 1068 | |
ad0abbf1 | 1069 | return rc; |
149d518a MCC |
1070 | } |
1071 | ||
593ae89a MCC |
1072 | static int mb86a20s_get_blk_error(struct dvb_frontend *fe, |
1073 | unsigned layer, | |
1074 | u32 *error, u32 *count) | |
1075 | { | |
1076 | struct mb86a20s_state *state = fe->demodulator_priv; | |
313cf4ef | 1077 | int rc, val; |
593ae89a MCC |
1078 | u32 collect_rate; |
1079 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); | |
1080 | ||
4f62a20d | 1081 | if (layer >= NUM_LAYERS) |
593ae89a MCC |
1082 | return -EINVAL; |
1083 | ||
1084 | /* Check if the PER measures are already available */ | |
1085 | rc = mb86a20s_writereg(state, 0x50, 0xb8); | |
1086 | if (rc < 0) | |
1087 | return rc; | |
1088 | rc = mb86a20s_readreg(state, 0x51); | |
1089 | if (rc < 0) | |
1090 | return rc; | |
1091 | ||
1092 | /* Check if data is available for that layer */ | |
1093 | ||
1094 | if (!(rc & (1 << layer))) { | |
1095 | dev_dbg(&state->i2c->dev, | |
1096 | "%s: block counts for layer %c aren't available yet.\n", | |
1097 | __func__, 'A' + layer); | |
1098 | return -EBUSY; | |
1099 | } | |
1100 | ||
1101 | /* Read Packet error Count */ | |
1102 | rc = mb86a20s_writereg(state, 0x50, 0xb9 + layer * 2); | |
1103 | if (rc < 0) | |
1104 | return rc; | |
1105 | rc = mb86a20s_readreg(state, 0x51); | |
1106 | if (rc < 0) | |
1107 | return rc; | |
1108 | *error = rc << 8; | |
1109 | rc = mb86a20s_writereg(state, 0x50, 0xba + layer * 2); | |
1110 | if (rc < 0) | |
1111 | return rc; | |
1112 | rc = mb86a20s_readreg(state, 0x51); | |
1113 | if (rc < 0) | |
1114 | return rc; | |
1115 | *error |= rc; | |
d56e326f | 1116 | dev_dbg(&state->i2c->dev, "%s: block error for layer %c: %d.\n", |
593ae89a MCC |
1117 | __func__, 'A' + layer, *error); |
1118 | ||
1119 | /* Read Bit Count */ | |
1120 | rc = mb86a20s_writereg(state, 0x50, 0xb2 + layer * 2); | |
1121 | if (rc < 0) | |
1122 | return rc; | |
1123 | rc = mb86a20s_readreg(state, 0x51); | |
1124 | if (rc < 0) | |
1125 | return rc; | |
1126 | *count = rc << 8; | |
1127 | rc = mb86a20s_writereg(state, 0x50, 0xb3 + layer * 2); | |
1128 | if (rc < 0) | |
1129 | return rc; | |
1130 | rc = mb86a20s_readreg(state, 0x51); | |
1131 | if (rc < 0) | |
1132 | return rc; | |
1133 | *count |= rc; | |
1134 | ||
1135 | dev_dbg(&state->i2c->dev, | |
1136 | "%s: block count for layer %c: %d.\n", | |
1137 | __func__, 'A' + layer, *count); | |
1138 | ||
1139 | /* | |
1140 | * As we get TMCC data from the frontend, we can better estimate the | |
1141 | * BER bit counters, in order to do the BER measure during a longer | |
1142 | * time. Use those data, if available, to update the bit count | |
1143 | * measure. | |
1144 | */ | |
1145 | ||
1146 | if (!state->estimated_rate[layer]) | |
1147 | goto reset_measurement; | |
1148 | ||
1149 | collect_rate = state->estimated_rate[layer] / 204 / 8; | |
593ae89a MCC |
1150 | if (collect_rate < 32) |
1151 | collect_rate = 32; | |
1152 | if (collect_rate > 65535) | |
1153 | collect_rate = 65535; | |
1154 | ||
1155 | if (collect_rate != *count) { | |
1156 | dev_dbg(&state->i2c->dev, | |
1157 | "%s: updating PER counter on layer %c to %d.\n", | |
1158 | __func__, 'A' + layer, collect_rate); | |
313cf4ef MCC |
1159 | |
1160 | /* Stop PER measurement */ | |
1161 | rc = mb86a20s_writereg(state, 0x50, 0xb0); | |
1162 | if (rc < 0) | |
1163 | return rc; | |
1164 | rc = mb86a20s_writereg(state, 0x51, 0x00); | |
1165 | if (rc < 0) | |
1166 | return rc; | |
1167 | ||
1168 | /* Update this layer's counter */ | |
593ae89a MCC |
1169 | rc = mb86a20s_writereg(state, 0x50, 0xb2 + layer * 2); |
1170 | if (rc < 0) | |
1171 | return rc; | |
1172 | rc = mb86a20s_writereg(state, 0x51, collect_rate >> 8); | |
1173 | if (rc < 0) | |
1174 | return rc; | |
1175 | rc = mb86a20s_writereg(state, 0x50, 0xb3 + layer * 2); | |
1176 | if (rc < 0) | |
1177 | return rc; | |
1178 | rc = mb86a20s_writereg(state, 0x51, collect_rate & 0xff); | |
1179 | if (rc < 0) | |
1180 | return rc; | |
313cf4ef MCC |
1181 | |
1182 | /* start PER measurement */ | |
1183 | rc = mb86a20s_writereg(state, 0x50, 0xb0); | |
1184 | if (rc < 0) | |
1185 | return rc; | |
1186 | rc = mb86a20s_writereg(state, 0x51, 0x07); | |
1187 | if (rc < 0) | |
1188 | return rc; | |
1189 | ||
1190 | /* Reset all counters to collect new data */ | |
1191 | rc = mb86a20s_writereg(state, 0x50, 0xb1); | |
1192 | if (rc < 0) | |
1193 | return rc; | |
1194 | rc = mb86a20s_writereg(state, 0x51, 0x07); | |
1195 | if (rc < 0) | |
1196 | return rc; | |
1197 | rc = mb86a20s_writereg(state, 0x51, 0x00); | |
1198 | ||
1199 | return rc; | |
593ae89a MCC |
1200 | } |
1201 | ||
1202 | reset_measurement: | |
1203 | /* Reset counter to collect new data */ | |
1204 | rc = mb86a20s_writereg(state, 0x50, 0xb1); | |
1205 | if (rc < 0) | |
1206 | return rc; | |
313cf4ef | 1207 | rc = mb86a20s_readreg(state, 0x51); |
593ae89a MCC |
1208 | if (rc < 0) |
1209 | return rc; | |
313cf4ef MCC |
1210 | val = rc; |
1211 | rc = mb86a20s_writereg(state, 0x51, val | (1 << layer)); | |
593ae89a MCC |
1212 | if (rc < 0) |
1213 | return rc; | |
313cf4ef | 1214 | rc = mb86a20s_writereg(state, 0x51, val & ~(1 << layer)); |
593ae89a | 1215 | |
313cf4ef | 1216 | return rc; |
593ae89a MCC |
1217 | } |
1218 | ||
25188bd0 MCC |
1219 | struct linear_segments { |
1220 | unsigned x, y; | |
1221 | }; | |
1222 | ||
1223 | /* | |
1224 | * All tables below return a dB/1000 measurement | |
1225 | */ | |
1226 | ||
ce08131c | 1227 | static const struct linear_segments cnr_to_db_table[] = { |
25188bd0 MCC |
1228 | { 19648, 0}, |
1229 | { 18187, 1000}, | |
1230 | { 16534, 2000}, | |
1231 | { 14823, 3000}, | |
1232 | { 13161, 4000}, | |
1233 | { 11622, 5000}, | |
1234 | { 10279, 6000}, | |
1235 | { 9089, 7000}, | |
1236 | { 8042, 8000}, | |
1237 | { 7137, 9000}, | |
1238 | { 6342, 10000}, | |
1239 | { 5641, 11000}, | |
1240 | { 5030, 12000}, | |
1241 | { 4474, 13000}, | |
1242 | { 3988, 14000}, | |
1243 | { 3556, 15000}, | |
1244 | { 3180, 16000}, | |
1245 | { 2841, 17000}, | |
1246 | { 2541, 18000}, | |
1247 | { 2276, 19000}, | |
1248 | { 2038, 20000}, | |
1249 | { 1800, 21000}, | |
1250 | { 1625, 22000}, | |
1251 | { 1462, 23000}, | |
1252 | { 1324, 24000}, | |
1253 | { 1175, 25000}, | |
1254 | { 1063, 26000}, | |
1255 | { 980, 27000}, | |
1256 | { 907, 28000}, | |
1257 | { 840, 29000}, | |
1258 | { 788, 30000}, | |
1259 | }; | |
1260 | ||
ce08131c | 1261 | static const struct linear_segments cnr_64qam_table[] = { |
25188bd0 MCC |
1262 | { 3922688, 0}, |
1263 | { 3920384, 1000}, | |
1264 | { 3902720, 2000}, | |
1265 | { 3894784, 3000}, | |
1266 | { 3882496, 4000}, | |
1267 | { 3872768, 5000}, | |
1268 | { 3858944, 6000}, | |
1269 | { 3851520, 7000}, | |
1270 | { 3838976, 8000}, | |
1271 | { 3829248, 9000}, | |
1272 | { 3818240, 10000}, | |
1273 | { 3806976, 11000}, | |
1274 | { 3791872, 12000}, | |
1275 | { 3767040, 13000}, | |
1276 | { 3720960, 14000}, | |
1277 | { 3637504, 15000}, | |
1278 | { 3498496, 16000}, | |
1279 | { 3296000, 17000}, | |
1280 | { 3031040, 18000}, | |
1281 | { 2715392, 19000}, | |
1282 | { 2362624, 20000}, | |
1283 | { 1963264, 21000}, | |
1284 | { 1649664, 22000}, | |
1285 | { 1366784, 23000}, | |
1286 | { 1120768, 24000}, | |
1287 | { 890880, 25000}, | |
1288 | { 723456, 26000}, | |
1289 | { 612096, 27000}, | |
1290 | { 518912, 28000}, | |
1291 | { 448256, 29000}, | |
1292 | { 388864, 30000}, | |
1293 | }; | |
1294 | ||
ce08131c | 1295 | static const struct linear_segments cnr_16qam_table[] = { |
25188bd0 MCC |
1296 | { 5314816, 0}, |
1297 | { 5219072, 1000}, | |
1298 | { 5118720, 2000}, | |
1299 | { 4998912, 3000}, | |
1300 | { 4875520, 4000}, | |
1301 | { 4736000, 5000}, | |
1302 | { 4604160, 6000}, | |
1303 | { 4458752, 7000}, | |
1304 | { 4300288, 8000}, | |
1305 | { 4092928, 9000}, | |
1306 | { 3836160, 10000}, | |
1307 | { 3521024, 11000}, | |
1308 | { 3155968, 12000}, | |
1309 | { 2756864, 13000}, | |
1310 | { 2347008, 14000}, | |
1311 | { 1955072, 15000}, | |
1312 | { 1593600, 16000}, | |
1313 | { 1297920, 17000}, | |
1314 | { 1043968, 18000}, | |
1315 | { 839680, 19000}, | |
1316 | { 672256, 20000}, | |
1317 | { 523008, 21000}, | |
1318 | { 424704, 22000}, | |
1319 | { 345088, 23000}, | |
1320 | { 280064, 24000}, | |
1321 | { 221440, 25000}, | |
1322 | { 179712, 26000}, | |
1323 | { 151040, 27000}, | |
1324 | { 128512, 28000}, | |
1325 | { 110080, 29000}, | |
1326 | { 95744, 30000}, | |
1327 | }; | |
1328 | ||
ce08131c | 1329 | static const struct linear_segments cnr_qpsk_table[] = { |
25188bd0 MCC |
1330 | { 2834176, 0}, |
1331 | { 2683648, 1000}, | |
1332 | { 2536960, 2000}, | |
1333 | { 2391808, 3000}, | |
1334 | { 2133248, 4000}, | |
1335 | { 1906176, 5000}, | |
1336 | { 1666560, 6000}, | |
1337 | { 1422080, 7000}, | |
1338 | { 1189632, 8000}, | |
1339 | { 976384, 9000}, | |
1340 | { 790272, 10000}, | |
1341 | { 633344, 11000}, | |
1342 | { 505600, 12000}, | |
1343 | { 402944, 13000}, | |
1344 | { 320768, 14000}, | |
1345 | { 255488, 15000}, | |
1346 | { 204032, 16000}, | |
1347 | { 163072, 17000}, | |
1348 | { 130304, 18000}, | |
1349 | { 105216, 19000}, | |
1350 | { 83456, 20000}, | |
1351 | { 65024, 21000}, | |
1352 | { 52480, 22000}, | |
1353 | { 42752, 23000}, | |
1354 | { 34560, 24000}, | |
1355 | { 27136, 25000}, | |
1356 | { 22016, 26000}, | |
1357 | { 18432, 27000}, | |
1358 | { 15616, 28000}, | |
1359 | { 13312, 29000}, | |
1360 | { 11520, 30000}, | |
1361 | }; | |
1362 | ||
ce08131c | 1363 | static u32 interpolate_value(u32 value, const struct linear_segments *segments, |
25188bd0 MCC |
1364 | unsigned len) |
1365 | { | |
1366 | u64 tmp64; | |
1367 | u32 dx, dy; | |
1368 | int i, ret; | |
1369 | ||
1370 | if (value >= segments[0].x) | |
1371 | return segments[0].y; | |
1372 | if (value < segments[len-1].x) | |
1373 | return segments[len-1].y; | |
1374 | ||
1375 | for (i = 1; i < len - 1; i++) { | |
1376 | /* If value is identical, no need to interpolate */ | |
1377 | if (value == segments[i].x) | |
1378 | return segments[i].y; | |
1379 | if (value > segments[i].x) | |
1380 | break; | |
1381 | } | |
1382 | ||
1383 | /* Linear interpolation between the two (x,y) points */ | |
1384 | dy = segments[i].y - segments[i - 1].y; | |
1385 | dx = segments[i - 1].x - segments[i].x; | |
1386 | tmp64 = value - segments[i].x; | |
1387 | tmp64 *= dy; | |
1388 | do_div(tmp64, dx); | |
1389 | ret = segments[i].y - tmp64; | |
1390 | ||
1391 | return ret; | |
1392 | } | |
1393 | ||
1394 | static int mb86a20s_get_main_CNR(struct dvb_frontend *fe) | |
1395 | { | |
1396 | struct mb86a20s_state *state = fe->demodulator_priv; | |
1397 | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
1398 | u32 cnr_linear, cnr; | |
1399 | int rc, val; | |
1400 | ||
1401 | /* Check if CNR is available */ | |
1402 | rc = mb86a20s_readreg(state, 0x45); | |
1403 | if (rc < 0) | |
1404 | return rc; | |
1405 | ||
1406 | if (!(rc & 0x40)) { | |
d56e326f | 1407 | dev_dbg(&state->i2c->dev, "%s: CNR is not available yet.\n", |
25188bd0 MCC |
1408 | __func__); |
1409 | return -EBUSY; | |
1410 | } | |
1411 | val = rc; | |
1412 | ||
1413 | rc = mb86a20s_readreg(state, 0x46); | |
1414 | if (rc < 0) | |
1415 | return rc; | |
1416 | cnr_linear = rc << 8; | |
1417 | ||
1418 | rc = mb86a20s_readreg(state, 0x46); | |
1419 | if (rc < 0) | |
1420 | return rc; | |
1421 | cnr_linear |= rc; | |
1422 | ||
1423 | cnr = interpolate_value(cnr_linear, | |
1424 | cnr_to_db_table, ARRAY_SIZE(cnr_to_db_table)); | |
1425 | ||
1426 | c->cnr.stat[0].scale = FE_SCALE_DECIBEL; | |
1427 | c->cnr.stat[0].svalue = cnr; | |
1428 | ||
1429 | dev_dbg(&state->i2c->dev, "%s: CNR is %d.%03d dB (%d)\n", | |
1430 | __func__, cnr / 1000, cnr % 1000, cnr_linear); | |
1431 | ||
1432 | /* CNR counter reset */ | |
1433 | rc = mb86a20s_writereg(state, 0x45, val | 0x10); | |
1434 | if (rc < 0) | |
1435 | return rc; | |
1436 | rc = mb86a20s_writereg(state, 0x45, val & 0x6f); | |
1437 | ||
1438 | return rc; | |
1439 | } | |
1440 | ||
593ae89a | 1441 | static int mb86a20s_get_blk_error_layer_CNR(struct dvb_frontend *fe) |
25188bd0 MCC |
1442 | { |
1443 | struct mb86a20s_state *state = fe->demodulator_priv; | |
1444 | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
1445 | u32 mer, cnr; | |
5cb88ca8 | 1446 | int rc, val, layer; |
ce08131c | 1447 | const struct linear_segments *segs; |
25188bd0 MCC |
1448 | unsigned segs_len; |
1449 | ||
1450 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); | |
1451 | ||
1452 | /* Check if the measures are already available */ | |
1453 | rc = mb86a20s_writereg(state, 0x50, 0x5b); | |
1454 | if (rc < 0) | |
1455 | return rc; | |
1456 | rc = mb86a20s_readreg(state, 0x51); | |
1457 | if (rc < 0) | |
1458 | return rc; | |
1459 | ||
1460 | /* Check if data is available */ | |
1461 | if (!(rc & 0x01)) { | |
d56e326f | 1462 | dev_dbg(&state->i2c->dev, |
25188bd0 MCC |
1463 | "%s: MER measures aren't available yet.\n", __func__); |
1464 | return -EBUSY; | |
1465 | } | |
1466 | ||
1467 | /* Read all layers */ | |
5cb88ca8 MCC |
1468 | for (layer = 0; layer < NUM_LAYERS; layer++) { |
1469 | if (!(c->isdbt_layer_enabled & (1 << layer))) { | |
1470 | c->cnr.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; | |
25188bd0 MCC |
1471 | continue; |
1472 | } | |
1473 | ||
5cb88ca8 | 1474 | rc = mb86a20s_writereg(state, 0x50, 0x52 + layer * 3); |
25188bd0 MCC |
1475 | if (rc < 0) |
1476 | return rc; | |
1477 | rc = mb86a20s_readreg(state, 0x51); | |
1478 | if (rc < 0) | |
1479 | return rc; | |
1480 | mer = rc << 16; | |
5cb88ca8 | 1481 | rc = mb86a20s_writereg(state, 0x50, 0x53 + layer * 3); |
25188bd0 MCC |
1482 | if (rc < 0) |
1483 | return rc; | |
1484 | rc = mb86a20s_readreg(state, 0x51); | |
1485 | if (rc < 0) | |
1486 | return rc; | |
1487 | mer |= rc << 8; | |
5cb88ca8 | 1488 | rc = mb86a20s_writereg(state, 0x50, 0x54 + layer * 3); |
25188bd0 MCC |
1489 | if (rc < 0) |
1490 | return rc; | |
1491 | rc = mb86a20s_readreg(state, 0x51); | |
1492 | if (rc < 0) | |
1493 | return rc; | |
1494 | mer |= rc; | |
1495 | ||
5cb88ca8 | 1496 | switch (c->layer[layer].modulation) { |
25188bd0 MCC |
1497 | case DQPSK: |
1498 | case QPSK: | |
1499 | segs = cnr_qpsk_table; | |
1500 | segs_len = ARRAY_SIZE(cnr_qpsk_table); | |
1501 | break; | |
1502 | case QAM_16: | |
1503 | segs = cnr_16qam_table; | |
1504 | segs_len = ARRAY_SIZE(cnr_16qam_table); | |
1505 | break; | |
1506 | default: | |
1507 | case QAM_64: | |
1508 | segs = cnr_64qam_table; | |
1509 | segs_len = ARRAY_SIZE(cnr_64qam_table); | |
1510 | break; | |
1511 | } | |
1512 | cnr = interpolate_value(mer, segs, segs_len); | |
1513 | ||
5cb88ca8 MCC |
1514 | c->cnr.stat[1 + layer].scale = FE_SCALE_DECIBEL; |
1515 | c->cnr.stat[1 + layer].svalue = cnr; | |
25188bd0 MCC |
1516 | |
1517 | dev_dbg(&state->i2c->dev, | |
1518 | "%s: CNR for layer %c is %d.%03d dB (MER = %d).\n", | |
5cb88ca8 | 1519 | __func__, 'A' + layer, cnr / 1000, cnr % 1000, mer); |
25188bd0 MCC |
1520 | |
1521 | } | |
1522 | ||
1523 | /* Start a new MER measurement */ | |
1524 | /* MER counter reset */ | |
1525 | rc = mb86a20s_writereg(state, 0x50, 0x50); | |
1526 | if (rc < 0) | |
1527 | return rc; | |
1528 | rc = mb86a20s_readreg(state, 0x51); | |
1529 | if (rc < 0) | |
1530 | return rc; | |
1531 | val = rc; | |
1532 | ||
1533 | rc = mb86a20s_writereg(state, 0x51, val | 0x01); | |
1534 | if (rc < 0) | |
1535 | return rc; | |
1536 | rc = mb86a20s_writereg(state, 0x51, val & 0x06); | |
1537 | if (rc < 0) | |
1538 | return rc; | |
1539 | ||
1540 | return 0; | |
1541 | } | |
1542 | ||
09b6d21e MCC |
1543 | static void mb86a20s_stats_not_ready(struct dvb_frontend *fe) |
1544 | { | |
1545 | struct mb86a20s_state *state = fe->demodulator_priv; | |
1546 | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
5cb88ca8 | 1547 | int layer; |
09b6d21e MCC |
1548 | |
1549 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); | |
a77cfcac | 1550 | |
09b6d21e MCC |
1551 | /* Fill the length of each status counter */ |
1552 | ||
1553 | /* Only global stats */ | |
1554 | c->strength.len = 1; | |
1555 | ||
1556 | /* Per-layer stats - 3 layers + global */ | |
4f62a20d MCC |
1557 | c->cnr.len = NUM_LAYERS + 1; |
1558 | c->pre_bit_error.len = NUM_LAYERS + 1; | |
1559 | c->pre_bit_count.len = NUM_LAYERS + 1; | |
1560 | c->post_bit_error.len = NUM_LAYERS + 1; | |
1561 | c->post_bit_count.len = NUM_LAYERS + 1; | |
1562 | c->block_error.len = NUM_LAYERS + 1; | |
1563 | c->block_count.len = NUM_LAYERS + 1; | |
09b6d21e MCC |
1564 | |
1565 | /* Signal is always available */ | |
1566 | c->strength.stat[0].scale = FE_SCALE_RELATIVE; | |
1567 | c->strength.stat[0].uvalue = 0; | |
1568 | ||
1569 | /* Put all of them at FE_SCALE_NOT_AVAILABLE */ | |
5cb88ca8 MCC |
1570 | for (layer = 0; layer < NUM_LAYERS + 1; layer++) { |
1571 | c->cnr.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; | |
1572 | c->pre_bit_error.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; | |
1573 | c->pre_bit_count.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; | |
1574 | c->post_bit_error.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; | |
1575 | c->post_bit_count.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; | |
1576 | c->block_error.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; | |
1577 | c->block_count.stat[layer].scale = FE_SCALE_NOT_AVAILABLE; | |
09b6d21e | 1578 | } |
b9ede79a MCC |
1579 | } |
1580 | ||
15b1c5a0 | 1581 | static int mb86a20s_get_stats(struct dvb_frontend *fe, int status_nr) |
149d518a MCC |
1582 | { |
1583 | struct mb86a20s_state *state = fe->demodulator_priv; | |
1584 | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
5cb88ca8 | 1585 | int rc = 0, layer; |
149d518a MCC |
1586 | u32 bit_error = 0, bit_count = 0; |
1587 | u32 t_pre_bit_error = 0, t_pre_bit_count = 0; | |
d9b6f08a | 1588 | u32 t_post_bit_error = 0, t_post_bit_count = 0; |
593ae89a MCC |
1589 | u32 block_error = 0, block_count = 0; |
1590 | u32 t_block_error = 0, t_block_count = 0; | |
d9b6f08a MCC |
1591 | int active_layers = 0, pre_ber_layers = 0, post_ber_layers = 0; |
1592 | int per_layers = 0; | |
149d518a | 1593 | |
25188bd0 MCC |
1594 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); |
1595 | ||
1596 | mb86a20s_get_main_CNR(fe); | |
1597 | ||
149d518a | 1598 | /* Get per-layer stats */ |
593ae89a | 1599 | mb86a20s_get_blk_error_layer_CNR(fe); |
25188bd0 | 1600 | |
15b1c5a0 MCC |
1601 | /* |
1602 | * At state 7, only CNR is available | |
1603 | * For BER measures, state=9 is required | |
1604 | * FIXME: we may get MER measures with state=8 | |
1605 | */ | |
1606 | if (status_nr < 9) | |
1607 | return 0; | |
1608 | ||
5cb88ca8 MCC |
1609 | for (layer = 0; layer < NUM_LAYERS; layer++) { |
1610 | if (c->isdbt_layer_enabled & (1 << layer)) { | |
149d518a MCC |
1611 | /* Layer is active and has rc segments */ |
1612 | active_layers++; | |
1613 | ||
149d518a | 1614 | /* Handle BER before vterbi */ |
5cb88ca8 | 1615 | rc = mb86a20s_get_pre_ber(fe, layer, |
ad0abbf1 | 1616 | &bit_error, &bit_count); |
149d518a | 1617 | if (rc >= 0) { |
5cb88ca8 MCC |
1618 | c->pre_bit_error.stat[1 + layer].scale = FE_SCALE_COUNTER; |
1619 | c->pre_bit_error.stat[1 + layer].uvalue += bit_error; | |
1620 | c->pre_bit_count.stat[1 + layer].scale = FE_SCALE_COUNTER; | |
1621 | c->pre_bit_count.stat[1 + layer].uvalue += bit_count; | |
149d518a MCC |
1622 | } else if (rc != -EBUSY) { |
1623 | /* | |
1624 | * If an I/O error happened, | |
1625 | * measures are now unavailable | |
1626 | */ | |
5cb88ca8 MCC |
1627 | c->pre_bit_error.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; |
1628 | c->pre_bit_count.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; | |
149d518a MCC |
1629 | dev_err(&state->i2c->dev, |
1630 | "%s: Can't get BER for layer %c (error %d).\n", | |
5cb88ca8 | 1631 | __func__, 'A' + layer, rc); |
149d518a | 1632 | } |
5cb88ca8 | 1633 | if (c->block_error.stat[1 + layer].scale != FE_SCALE_NOT_AVAILABLE) |
d9b6f08a MCC |
1634 | pre_ber_layers++; |
1635 | ||
1636 | /* Handle BER post vterbi */ | |
5cb88ca8 | 1637 | rc = mb86a20s_get_post_ber(fe, layer, |
d9b6f08a MCC |
1638 | &bit_error, &bit_count); |
1639 | if (rc >= 0) { | |
5cb88ca8 MCC |
1640 | c->post_bit_error.stat[1 + layer].scale = FE_SCALE_COUNTER; |
1641 | c->post_bit_error.stat[1 + layer].uvalue += bit_error; | |
1642 | c->post_bit_count.stat[1 + layer].scale = FE_SCALE_COUNTER; | |
1643 | c->post_bit_count.stat[1 + layer].uvalue += bit_count; | |
d9b6f08a MCC |
1644 | } else if (rc != -EBUSY) { |
1645 | /* | |
1646 | * If an I/O error happened, | |
1647 | * measures are now unavailable | |
1648 | */ | |
5cb88ca8 MCC |
1649 | c->post_bit_error.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; |
1650 | c->post_bit_count.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; | |
d9b6f08a MCC |
1651 | dev_err(&state->i2c->dev, |
1652 | "%s: Can't get BER for layer %c (error %d).\n", | |
5cb88ca8 | 1653 | __func__, 'A' + layer, rc); |
d9b6f08a | 1654 | } |
5cb88ca8 | 1655 | if (c->block_error.stat[1 + layer].scale != FE_SCALE_NOT_AVAILABLE) |
d9b6f08a | 1656 | post_ber_layers++; |
149d518a | 1657 | |
593ae89a | 1658 | /* Handle Block errors for PER/UCB reports */ |
5cb88ca8 | 1659 | rc = mb86a20s_get_blk_error(fe, layer, |
593ae89a MCC |
1660 | &block_error, |
1661 | &block_count); | |
1662 | if (rc >= 0) { | |
5cb88ca8 MCC |
1663 | c->block_error.stat[1 + layer].scale = FE_SCALE_COUNTER; |
1664 | c->block_error.stat[1 + layer].uvalue += block_error; | |
1665 | c->block_count.stat[1 + layer].scale = FE_SCALE_COUNTER; | |
1666 | c->block_count.stat[1 + layer].uvalue += block_count; | |
593ae89a MCC |
1667 | } else if (rc != -EBUSY) { |
1668 | /* | |
1669 | * If an I/O error happened, | |
1670 | * measures are now unavailable | |
1671 | */ | |
5cb88ca8 MCC |
1672 | c->block_error.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; |
1673 | c->block_count.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE; | |
593ae89a MCC |
1674 | dev_err(&state->i2c->dev, |
1675 | "%s: Can't get PER for layer %c (error %d).\n", | |
5cb88ca8 | 1676 | __func__, 'A' + layer, rc); |
593ae89a MCC |
1677 | |
1678 | } | |
5cb88ca8 | 1679 | if (c->block_error.stat[1 + layer].scale != FE_SCALE_NOT_AVAILABLE) |
593ae89a MCC |
1680 | per_layers++; |
1681 | ||
d9b6f08a | 1682 | /* Update total preBER */ |
5cb88ca8 MCC |
1683 | t_pre_bit_error += c->pre_bit_error.stat[1 + layer].uvalue; |
1684 | t_pre_bit_count += c->pre_bit_count.stat[1 + layer].uvalue; | |
593ae89a | 1685 | |
d9b6f08a | 1686 | /* Update total postBER */ |
5cb88ca8 MCC |
1687 | t_post_bit_error += c->post_bit_error.stat[1 + layer].uvalue; |
1688 | t_post_bit_count += c->post_bit_count.stat[1 + layer].uvalue; | |
d9b6f08a | 1689 | |
593ae89a | 1690 | /* Update total PER */ |
5cb88ca8 MCC |
1691 | t_block_error += c->block_error.stat[1 + layer].uvalue; |
1692 | t_block_count += c->block_count.stat[1 + layer].uvalue; | |
149d518a MCC |
1693 | } |
1694 | } | |
1695 | ||
1696 | /* | |
1697 | * Start showing global count if at least one error count is | |
1698 | * available. | |
1699 | */ | |
d9b6f08a | 1700 | if (pre_ber_layers) { |
149d518a MCC |
1701 | /* |
1702 | * At least one per-layer BER measure was read. We can now | |
1703 | * calculate the total BER | |
1704 | * | |
1705 | * Total Bit Error/Count is calculated as the sum of the | |
1706 | * bit errors on all active layers. | |
1707 | */ | |
1708 | c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; | |
1709 | c->pre_bit_error.stat[0].uvalue = t_pre_bit_error; | |
1710 | c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; | |
1711 | c->pre_bit_count.stat[0].uvalue = t_pre_bit_count; | |
f67102c4 MCC |
1712 | } else { |
1713 | c->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
1714 | c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; | |
149d518a MCC |
1715 | } |
1716 | ||
d9b6f08a MCC |
1717 | /* |
1718 | * Start showing global count if at least one error count is | |
1719 | * available. | |
1720 | */ | |
1721 | if (post_ber_layers) { | |
1722 | /* | |
1723 | * At least one per-layer BER measure was read. We can now | |
1724 | * calculate the total BER | |
1725 | * | |
1726 | * Total Bit Error/Count is calculated as the sum of the | |
1727 | * bit errors on all active layers. | |
1728 | */ | |
1729 | c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; | |
1730 | c->post_bit_error.stat[0].uvalue = t_post_bit_error; | |
1731 | c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; | |
1732 | c->post_bit_count.stat[0].uvalue = t_post_bit_count; | |
f67102c4 MCC |
1733 | } else { |
1734 | c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
1735 | c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; | |
d9b6f08a MCC |
1736 | } |
1737 | ||
593ae89a MCC |
1738 | if (per_layers) { |
1739 | /* | |
1740 | * At least one per-layer UCB measure was read. We can now | |
1741 | * calculate the total UCB | |
1742 | * | |
1743 | * Total block Error/Count is calculated as the sum of the | |
1744 | * block errors on all active layers. | |
1745 | */ | |
1746 | c->block_error.stat[0].scale = FE_SCALE_COUNTER; | |
1747 | c->block_error.stat[0].uvalue = t_block_error; | |
1748 | c->block_count.stat[0].scale = FE_SCALE_COUNTER; | |
1749 | c->block_count.stat[0].uvalue = t_block_count; | |
f67102c4 MCC |
1750 | } else { |
1751 | c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
1752 | c->block_count.stat[0].scale = FE_SCALE_COUNTER; | |
593ae89a MCC |
1753 | } |
1754 | ||
149d518a MCC |
1755 | return rc; |
1756 | } | |
09b6d21e MCC |
1757 | |
1758 | /* | |
1759 | * The functions below are called via DVB callbacks, so they need to | |
1760 | * properly use the I2C gate control | |
1761 | */ | |
1762 | ||
dd4493ef MCC |
1763 | static int mb86a20s_initfe(struct dvb_frontend *fe) |
1764 | { | |
1765 | struct mb86a20s_state *state = fe->demodulator_priv; | |
768e6dad | 1766 | u64 pll; |
0e4bbedd | 1767 | u32 fclk; |
dd4493ef | 1768 | int rc; |
04fa725e | 1769 | u8 regD5 = 1, reg71, reg09 = 0x3a; |
dd4493ef | 1770 | |
f66d81b5 | 1771 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); |
dd4493ef MCC |
1772 | |
1773 | if (fe->ops.i2c_gate_ctrl) | |
1774 | fe->ops.i2c_gate_ctrl(fe, 0); | |
1775 | ||
1776 | /* Initialize the frontend */ | |
768e6dad | 1777 | rc = mb86a20s_writeregdata(state, mb86a20s_init1); |
dd4493ef MCC |
1778 | if (rc < 0) |
1779 | goto err; | |
1780 | ||
04fa725e MCC |
1781 | if (!state->inversion) |
1782 | reg09 |= 0x04; | |
1783 | rc = mb86a20s_writereg(state, 0x09, reg09); | |
1784 | if (rc < 0) | |
1785 | goto err; | |
1786 | if (!state->bw) | |
1787 | reg71 = 1; | |
1788 | else | |
1789 | reg71 = 0; | |
1790 | rc = mb86a20s_writereg(state, 0x39, reg71); | |
1791 | if (rc < 0) | |
1792 | goto err; | |
1793 | rc = mb86a20s_writereg(state, 0x71, state->bw); | |
1794 | if (rc < 0) | |
1795 | goto err; | |
1796 | if (state->subchannel) { | |
1797 | rc = mb86a20s_writereg(state, 0x44, state->subchannel); | |
1798 | if (rc < 0) | |
1799 | goto err; | |
1800 | } | |
1801 | ||
0e4bbedd MCC |
1802 | fclk = state->config->fclk; |
1803 | if (!fclk) | |
1804 | fclk = 32571428; | |
1805 | ||
768e6dad MCC |
1806 | /* Adjust IF frequency to match tuner */ |
1807 | if (fe->ops.tuner_ops.get_if_frequency) | |
1808 | fe->ops.tuner_ops.get_if_frequency(fe, &state->if_freq); | |
1809 | ||
1810 | if (!state->if_freq) | |
1811 | state->if_freq = 3300000; | |
1812 | ||
0e4bbedd MCC |
1813 | pll = (((u64)1) << 34) * state->if_freq; |
1814 | do_div(pll, 63 * fclk); | |
1815 | pll = (1 << 25) - pll; | |
1816 | rc = mb86a20s_writereg(state, 0x28, 0x2a); | |
1817 | if (rc < 0) | |
1818 | goto err; | |
1819 | rc = mb86a20s_writereg(state, 0x29, (pll >> 16) & 0xff); | |
1820 | if (rc < 0) | |
1821 | goto err; | |
1822 | rc = mb86a20s_writereg(state, 0x2a, (pll >> 8) & 0xff); | |
1823 | if (rc < 0) | |
1824 | goto err; | |
1825 | rc = mb86a20s_writereg(state, 0x2b, pll & 0xff); | |
1826 | if (rc < 0) | |
1827 | goto err; | |
1828 | dev_dbg(&state->i2c->dev, "%s: fclk=%d, IF=%d, clock reg=0x%06llx\n", | |
1829 | __func__, fclk, state->if_freq, (long long)pll); | |
1830 | ||
768e6dad MCC |
1831 | /* pll = freq[Hz] * 2^24/10^6 / 16.285714286 */ |
1832 | pll = state->if_freq * 1677721600L; | |
1833 | do_div(pll, 1628571429L); | |
1834 | rc = mb86a20s_writereg(state, 0x28, 0x20); | |
1835 | if (rc < 0) | |
1836 | goto err; | |
1837 | rc = mb86a20s_writereg(state, 0x29, (pll >> 16) & 0xff); | |
1838 | if (rc < 0) | |
1839 | goto err; | |
1840 | rc = mb86a20s_writereg(state, 0x2a, (pll >> 8) & 0xff); | |
1841 | if (rc < 0) | |
1842 | goto err; | |
1843 | rc = mb86a20s_writereg(state, 0x2b, pll & 0xff); | |
1844 | if (rc < 0) | |
1845 | goto err; | |
0e4bbedd | 1846 | dev_dbg(&state->i2c->dev, "%s: IF=%d, IF reg=0x%06llx\n", |
768e6dad MCC |
1847 | __func__, state->if_freq, (long long)pll); |
1848 | ||
9d32069f | 1849 | if (!state->config->is_serial) |
dd4493ef MCC |
1850 | regD5 &= ~1; |
1851 | ||
9d32069f MCC |
1852 | rc = mb86a20s_writereg(state, 0x50, 0xd5); |
1853 | if (rc < 0) | |
1854 | goto err; | |
1855 | rc = mb86a20s_writereg(state, 0x51, regD5); | |
1856 | if (rc < 0) | |
1857 | goto err; | |
dd4493ef | 1858 | |
768e6dad MCC |
1859 | rc = mb86a20s_writeregdata(state, mb86a20s_init2); |
1860 | if (rc < 0) | |
1861 | goto err; | |
1862 | ||
1863 | ||
dd4493ef MCC |
1864 | err: |
1865 | if (fe->ops.i2c_gate_ctrl) | |
1866 | fe->ops.i2c_gate_ctrl(fe, 1); | |
1867 | ||
1868 | if (rc < 0) { | |
1869 | state->need_init = true; | |
f66d81b5 MCC |
1870 | dev_info(&state->i2c->dev, |
1871 | "mb86a20s: Init failed. Will try again later\n"); | |
dd4493ef MCC |
1872 | } else { |
1873 | state->need_init = false; | |
f66d81b5 | 1874 | dev_dbg(&state->i2c->dev, "Initialization succeeded.\n"); |
dd4493ef MCC |
1875 | } |
1876 | return rc; | |
1877 | } | |
1878 | ||
1879 | static int mb86a20s_set_frontend(struct dvb_frontend *fe) | |
1880 | { | |
1881 | struct mb86a20s_state *state = fe->demodulator_priv; | |
dd4493ef | 1882 | struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
04fa725e | 1883 | int rc, if_freq; |
f66d81b5 | 1884 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); |
dd4493ef | 1885 | |
04fa725e MCC |
1886 | if (!c->isdbt_layer_enabled) |
1887 | c->isdbt_layer_enabled = 7; | |
1888 | ||
1889 | if (c->isdbt_layer_enabled == 1) | |
1890 | state->bw = MB86A20S_1SEG; | |
1891 | else if (c->isdbt_partial_reception) | |
1892 | state->bw = MB86A20S_13SEG_PARTIAL; | |
1893 | else | |
1894 | state->bw = MB86A20S_13SEG; | |
1895 | ||
1896 | if (c->inversion == INVERSION_ON) | |
1897 | state->inversion = true; | |
1898 | else | |
1899 | state->inversion = false; | |
1900 | ||
1901 | if (!c->isdbt_sb_mode) { | |
1902 | state->subchannel = 0; | |
1903 | } else { | |
41c6e9dd | 1904 | if (c->isdbt_sb_subchannel >= ARRAY_SIZE(mb86a20s_subchannel)) |
04fa725e MCC |
1905 | c->isdbt_sb_subchannel = 0; |
1906 | ||
1907 | state->subchannel = mb86a20s_subchannel[c->isdbt_sb_subchannel]; | |
1908 | } | |
1909 | ||
dd4493ef MCC |
1910 | /* |
1911 | * Gate should already be opened, but it doesn't hurt to | |
1912 | * double-check | |
1913 | */ | |
1914 | if (fe->ops.i2c_gate_ctrl) | |
1915 | fe->ops.i2c_gate_ctrl(fe, 1); | |
dd4493ef MCC |
1916 | fe->ops.tuner_ops.set_params(fe); |
1917 | ||
a78b41d5 | 1918 | if (fe->ops.tuner_ops.get_if_frequency) |
768e6dad MCC |
1919 | fe->ops.tuner_ops.get_if_frequency(fe, &if_freq); |
1920 | ||
dd4493ef MCC |
1921 | /* |
1922 | * Make it more reliable: if, for some reason, the initial | |
1923 | * device initialization doesn't happen, initialize it when | |
1924 | * a SBTVD parameters are adjusted. | |
1925 | * | |
1926 | * Unfortunately, due to a hard to track bug at tda829x/tda18271, | |
1927 | * the agc callback logic is not called during DVB attach time, | |
1928 | * causing mb86a20s to not be initialized with Kworld SBTVD. | |
1929 | * So, this hack is needed, in order to make Kworld SBTVD to work. | |
768e6dad MCC |
1930 | * |
1931 | * It is also needed to change the IF after the initial init. | |
a78b41d5 MCC |
1932 | * |
1933 | * HACK: Always init the frontend when set_frontend is called: | |
1934 | * it was noticed that, on some devices, it fails to lock on a | |
1935 | * different channel. So, it is better to reset everything, even | |
1936 | * wasting some time, than to loose channel lock. | |
dd4493ef | 1937 | */ |
a78b41d5 | 1938 | mb86a20s_initfe(fe); |
dd4493ef MCC |
1939 | |
1940 | if (fe->ops.i2c_gate_ctrl) | |
1941 | fe->ops.i2c_gate_ctrl(fe, 0); | |
d01a8ee3 | 1942 | |
dd4493ef | 1943 | rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception); |
09b6d21e | 1944 | mb86a20s_reset_counters(fe); |
3a2e4751 | 1945 | mb86a20s_stats_not_ready(fe); |
d01a8ee3 | 1946 | |
dd4493ef MCC |
1947 | if (fe->ops.i2c_gate_ctrl) |
1948 | fe->ops.i2c_gate_ctrl(fe, 1); | |
1949 | ||
1950 | return rc; | |
1951 | } | |
1952 | ||
09b6d21e | 1953 | static int mb86a20s_read_status_and_stats(struct dvb_frontend *fe, |
0df289a2 | 1954 | enum fe_status *status) |
d36e418a | 1955 | { |
09b6d21e | 1956 | struct mb86a20s_state *state = fe->demodulator_priv; |
15b1c5a0 | 1957 | int rc, status_nr; |
d36e418a | 1958 | |
09b6d21e | 1959 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); |
d36e418a MCC |
1960 | |
1961 | if (fe->ops.i2c_gate_ctrl) | |
1962 | fe->ops.i2c_gate_ctrl(fe, 0); | |
1963 | ||
09b6d21e | 1964 | /* Get lock */ |
15b1c5a0 MCC |
1965 | status_nr = mb86a20s_read_status(fe, status); |
1966 | if (status_nr < 7) { | |
09b6d21e MCC |
1967 | mb86a20s_stats_not_ready(fe); |
1968 | mb86a20s_reset_frontend_cache(fe); | |
1969 | } | |
15b1c5a0 | 1970 | if (status_nr < 0) { |
149d518a MCC |
1971 | dev_err(&state->i2c->dev, |
1972 | "%s: Can't read frontend lock status\n", __func__); | |
09b6d21e | 1973 | goto error; |
149d518a | 1974 | } |
09b6d21e MCC |
1975 | |
1976 | /* Get signal strength */ | |
1977 | rc = mb86a20s_read_signal_strength(fe); | |
1978 | if (rc < 0) { | |
149d518a MCC |
1979 | dev_err(&state->i2c->dev, |
1980 | "%s: Can't reset VBER registers.\n", __func__); | |
09b6d21e MCC |
1981 | mb86a20s_stats_not_ready(fe); |
1982 | mb86a20s_reset_frontend_cache(fe); | |
149d518a MCC |
1983 | |
1984 | rc = 0; /* Status is OK */ | |
09b6d21e MCC |
1985 | goto error; |
1986 | } | |
09b6d21e | 1987 | |
15b1c5a0 | 1988 | if (status_nr >= 7) { |
09b6d21e MCC |
1989 | /* Get TMCC info*/ |
1990 | rc = mb86a20s_get_frontend(fe); | |
149d518a MCC |
1991 | if (rc < 0) { |
1992 | dev_err(&state->i2c->dev, | |
1993 | "%s: Can't get FE TMCC data.\n", __func__); | |
1994 | rc = 0; /* Status is OK */ | |
1995 | goto error; | |
1996 | } | |
1997 | ||
1998 | /* Get statistics */ | |
15b1c5a0 | 1999 | rc = mb86a20s_get_stats(fe, status_nr); |
149d518a MCC |
2000 | if (rc < 0 && rc != -EBUSY) { |
2001 | dev_err(&state->i2c->dev, | |
2002 | "%s: Can't get FE statistics.\n", __func__); | |
2003 | rc = 0; | |
09b6d21e | 2004 | goto error; |
149d518a MCC |
2005 | } |
2006 | rc = 0; /* Don't return EBUSY to userspace */ | |
09b6d21e | 2007 | } |
149d518a | 2008 | goto ok; |
09b6d21e | 2009 | |
149d518a | 2010 | error: |
09b6d21e | 2011 | mb86a20s_stats_not_ready(fe); |
d36e418a | 2012 | |
149d518a | 2013 | ok: |
d36e418a MCC |
2014 | if (fe->ops.i2c_gate_ctrl) |
2015 | fe->ops.i2c_gate_ctrl(fe, 1); | |
149d518a | 2016 | |
09b6d21e MCC |
2017 | return rc; |
2018 | } | |
2019 | ||
2020 | static int mb86a20s_read_signal_strength_from_cache(struct dvb_frontend *fe, | |
2021 | u16 *strength) | |
2022 | { | |
2023 | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
2024 | ||
2025 | ||
2026 | *strength = c->strength.stat[0].uvalue; | |
d36e418a | 2027 | |
09b6d21e | 2028 | return 0; |
d36e418a MCC |
2029 | } |
2030 | ||
b9ede79a | 2031 | static int mb86a20s_tune(struct dvb_frontend *fe, |
7e072221 | 2032 | bool re_tune, |
b9ede79a MCC |
2033 | unsigned int mode_flags, |
2034 | unsigned int *delay, | |
0df289a2 | 2035 | enum fe_status *status) |
b9ede79a | 2036 | { |
f66d81b5 | 2037 | struct mb86a20s_state *state = fe->demodulator_priv; |
b9ede79a MCC |
2038 | int rc = 0; |
2039 | ||
f66d81b5 | 2040 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); |
b9ede79a | 2041 | |
7e072221 | 2042 | if (re_tune) |
2d76e22b | 2043 | rc = mb86a20s_set_frontend(fe); |
b9ede79a MCC |
2044 | |
2045 | if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) | |
09b6d21e | 2046 | mb86a20s_read_status_and_stats(fe, status); |
b9ede79a MCC |
2047 | |
2048 | return rc; | |
2049 | } | |
2050 | ||
2051 | static void mb86a20s_release(struct dvb_frontend *fe) | |
2052 | { | |
2053 | struct mb86a20s_state *state = fe->demodulator_priv; | |
2054 | ||
f66d81b5 | 2055 | dev_dbg(&state->i2c->dev, "%s called.\n", __func__); |
b9ede79a MCC |
2056 | |
2057 | kfree(state); | |
2058 | } | |
2059 | ||
2060 | static struct dvb_frontend_ops mb86a20s_ops; | |
2061 | ||
2062 | struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config, | |
2063 | struct i2c_adapter *i2c) | |
2064 | { | |
f66d81b5 | 2065 | struct mb86a20s_state *state; |
b9ede79a MCC |
2066 | u8 rev; |
2067 | ||
f167e302 MCC |
2068 | dev_dbg(&i2c->dev, "%s called.\n", __func__); |
2069 | ||
b9ede79a | 2070 | /* allocate memory for the internal state */ |
f66d81b5 | 2071 | state = kzalloc(sizeof(struct mb86a20s_state), GFP_KERNEL); |
b9ede79a | 2072 | if (state == NULL) { |
f167e302 | 2073 | dev_err(&i2c->dev, |
f66d81b5 | 2074 | "%s: unable to allocate memory for state\n", __func__); |
b9ede79a MCC |
2075 | goto error; |
2076 | } | |
2077 | ||
2078 | /* setup the state */ | |
2079 | state->config = config; | |
2080 | state->i2c = i2c; | |
2081 | ||
2082 | /* create dvb_frontend */ | |
2083 | memcpy(&state->frontend.ops, &mb86a20s_ops, | |
2084 | sizeof(struct dvb_frontend_ops)); | |
2085 | state->frontend.demodulator_priv = state; | |
2086 | ||
2087 | /* Check if it is a mb86a20s frontend */ | |
2088 | rev = mb86a20s_readreg(state, 0); | |
2089 | ||
2090 | if (rev == 0x13) { | |
f167e302 | 2091 | dev_info(&i2c->dev, |
f66d81b5 | 2092 | "Detected a Fujitsu mb86a20s frontend\n"); |
b9ede79a | 2093 | } else { |
f167e302 | 2094 | dev_dbg(&i2c->dev, |
f66d81b5 | 2095 | "Frontend revision %d is unknown - aborting.\n", |
b9ede79a MCC |
2096 | rev); |
2097 | goto error; | |
2098 | } | |
2099 | ||
2100 | return &state->frontend; | |
2101 | ||
2102 | error: | |
2103 | kfree(state); | |
2104 | return NULL; | |
2105 | } | |
2106 | EXPORT_SYMBOL(mb86a20s_attach); | |
2107 | ||
2108 | static struct dvb_frontend_ops mb86a20s_ops = { | |
2d76e22b | 2109 | .delsys = { SYS_ISDBT }, |
b9ede79a MCC |
2110 | /* Use dib8000 values per default */ |
2111 | .info = { | |
2112 | .name = "Fujitsu mb86A20s", | |
04fa725e | 2113 | .caps = FE_CAN_RECOVER | |
b9ede79a MCC |
2114 | FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
2115 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | | |
2116 | FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | | |
2117 | FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_QAM_AUTO | | |
2118 | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO, | |
2119 | /* Actually, those values depend on the used tuner */ | |
2120 | .frequency_min = 45000000, | |
2121 | .frequency_max = 864000000, | |
2122 | .frequency_stepsize = 62500, | |
2123 | }, | |
2124 | ||
2125 | .release = mb86a20s_release, | |
2126 | ||
2127 | .init = mb86a20s_initfe, | |
2d76e22b | 2128 | .set_frontend = mb86a20s_set_frontend, |
09b6d21e MCC |
2129 | .read_status = mb86a20s_read_status_and_stats, |
2130 | .read_signal_strength = mb86a20s_read_signal_strength_from_cache, | |
b9ede79a MCC |
2131 | .tune = mb86a20s_tune, |
2132 | }; | |
2133 | ||
2134 | MODULE_DESCRIPTION("DVB Frontend module for Fujitsu mb86A20s hardware"); | |
37e59f87 | 2135 | MODULE_AUTHOR("Mauro Carvalho Chehab"); |
b9ede79a | 2136 | MODULE_LICENSE("GPL"); |