]>
Commit | Line | Data |
---|---|---|
cb7a01ac MCC |
1 | # |
2 | # Multimedia Video device configuration | |
3 | # | |
4 | ||
5 | if VIDEO_V4L2 | |
6 | ||
cb7a01ac | 7 | config VIDEO_IR_I2C |
fccea74f | 8 | tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT |
cb7a01ac MCC |
9 | depends on I2C && RC_CORE |
10 | default y | |
11 | ---help--- | |
12 | Most boards have an IR chip directly connected via GPIO. However, | |
13 | some video boards have the IR connected via I2C bus. | |
14 | ||
15 | If your board doesn't have an I2C IR chip, you may disable this | |
16 | option. | |
17 | ||
18 | In doubt, say Y. | |
19 | ||
20 | # | |
21 | # Encoder / Decoder module configuration | |
22 | # | |
23 | ||
8283a092 | 24 | menu "I2C Encoders, decoders, sensors and other helper chips" |
5cc596c6 | 25 | visible if !MEDIA_SUBDRV_AUTOSELECT || COMPILE_TEST |
cb7a01ac MCC |
26 | |
27 | comment "Audio decoders, processors and mixers" | |
28 | ||
29 | config VIDEO_TVAUDIO | |
30 | tristate "Simple audio decoder chips" | |
31 | depends on VIDEO_V4L2 && I2C | |
32 | ---help--- | |
33 | Support for several audio decoder chips found on some bt8xx boards: | |
34 | Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, | |
35 | tea6320, tea6420, tda8425, ta8874z. | |
36 | Microchip: pic16c54 based design on ProVideo PV951 board. | |
37 | ||
38 | To compile this driver as a module, choose M here: the | |
39 | module will be called tvaudio. | |
40 | ||
41 | config VIDEO_TDA7432 | |
42 | tristate "Philips TDA7432 audio processor" | |
43 | depends on VIDEO_V4L2 && I2C | |
44 | ---help--- | |
45 | Support for tda7432 audio decoder chip found on some bt8xx boards. | |
46 | ||
47 | To compile this driver as a module, choose M here: the | |
48 | module will be called tda7432. | |
49 | ||
50 | config VIDEO_TDA9840 | |
51 | tristate "Philips TDA9840 audio processor" | |
52 | depends on I2C | |
53 | ---help--- | |
54 | Support for tda9840 audio decoder chip found on some Zoran boards. | |
55 | ||
56 | To compile this driver as a module, choose M here: the | |
57 | module will be called tda9840. | |
58 | ||
59 | config VIDEO_TEA6415C | |
60 | tristate "Philips TEA6415C audio processor" | |
61 | depends on I2C | |
62 | ---help--- | |
63 | Support for tea6415c audio decoder chip found on some bt8xx boards. | |
64 | ||
65 | To compile this driver as a module, choose M here: the | |
66 | module will be called tea6415c. | |
67 | ||
68 | config VIDEO_TEA6420 | |
69 | tristate "Philips TEA6420 audio processor" | |
70 | depends on I2C | |
71 | ---help--- | |
72 | Support for tea6420 audio decoder chip found on some bt8xx boards. | |
73 | ||
74 | To compile this driver as a module, choose M here: the | |
75 | module will be called tea6420. | |
76 | ||
77 | config VIDEO_MSP3400 | |
78 | tristate "Micronas MSP34xx audio decoders" | |
79 | depends on VIDEO_V4L2 && I2C | |
80 | ---help--- | |
81 | Support for the Micronas MSP34xx series of audio decoders. | |
82 | ||
83 | To compile this driver as a module, choose M here: the | |
84 | module will be called msp3400. | |
85 | ||
fc279cc2 HV |
86 | config VIDEO_CS3308 |
87 | tristate "Cirrus Logic CS3308 audio ADC" | |
88 | depends on VIDEO_V4L2 && I2C | |
89 | ---help--- | |
90 | Support for the Cirrus Logic CS3308 High Performance 8-Channel | |
91 | Analog Volume Control | |
92 | ||
93 | To compile this driver as a module, choose M here: the | |
94 | module will be called cs3308. | |
95 | ||
cb7a01ac MCC |
96 | config VIDEO_CS5345 |
97 | tristate "Cirrus Logic CS5345 audio ADC" | |
98 | depends on VIDEO_V4L2 && I2C | |
99 | ---help--- | |
100 | Support for the Cirrus Logic CS5345 24-bit, 192 kHz | |
101 | stereo A/D converter. | |
102 | ||
103 | To compile this driver as a module, choose M here: the | |
104 | module will be called cs5345. | |
105 | ||
106 | config VIDEO_CS53L32A | |
107 | tristate "Cirrus Logic CS53L32A audio ADC" | |
108 | depends on VIDEO_V4L2 && I2C | |
109 | ---help--- | |
110 | Support for the Cirrus Logic CS53L32A low voltage | |
111 | stereo A/D converter. | |
112 | ||
113 | To compile this driver as a module, choose M here: the | |
114 | module will be called cs53l32a. | |
115 | ||
116 | config VIDEO_TLV320AIC23B | |
117 | tristate "Texas Instruments TLV320AIC23B audio codec" | |
2cca7d4e | 118 | depends on VIDEO_V4L2 && I2C |
cb7a01ac MCC |
119 | ---help--- |
120 | Support for the Texas Instruments TLV320AIC23B audio codec. | |
121 | ||
122 | To compile this driver as a module, choose M here: the | |
123 | module will be called tlv320aic23b. | |
124 | ||
73d9f979 HV |
125 | config VIDEO_UDA1342 |
126 | tristate "Philips UDA1342 audio codec" | |
127 | depends on VIDEO_V4L2 && I2C | |
128 | ---help--- | |
129 | Support for the Philips UDA1342 audio codec. | |
130 | ||
131 | To compile this driver as a module, choose M here: the | |
132 | module will be called uda1342. | |
133 | ||
cb7a01ac MCC |
134 | config VIDEO_WM8775 |
135 | tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" | |
136 | depends on VIDEO_V4L2 && I2C | |
137 | ---help--- | |
138 | Support for the Wolfson Microelectronics WM8775 high | |
139 | performance stereo A/D Converter with a 4 channel input mixer. | |
140 | ||
141 | To compile this driver as a module, choose M here: the | |
142 | module will be called wm8775. | |
143 | ||
144 | config VIDEO_WM8739 | |
145 | tristate "Wolfson Microelectronics WM8739 stereo audio ADC" | |
146 | depends on VIDEO_V4L2 && I2C | |
147 | ---help--- | |
148 | Support for the Wolfson Microelectronics WM8739 | |
149 | stereo A/D Converter. | |
150 | ||
151 | To compile this driver as a module, choose M here: the | |
152 | module will be called wm8739. | |
153 | ||
154 | config VIDEO_VP27SMPX | |
c7c54a98 | 155 | tristate "Panasonic VP27's internal MPX" |
cb7a01ac MCC |
156 | depends on VIDEO_V4L2 && I2C |
157 | ---help--- | |
158 | Support for the internal MPX of the Panasonic VP27s tuner. | |
159 | ||
160 | To compile this driver as a module, choose M here: the | |
161 | module will be called vp27smpx. | |
162 | ||
c7c54a98 HV |
163 | config VIDEO_SONY_BTF_MPX |
164 | tristate "Sony BTF's internal MPX" | |
165 | depends on VIDEO_V4L2 && I2C | |
166 | help | |
167 | Support for the internal MPX of the Sony BTF-PG472Z tuner. | |
168 | ||
169 | To compile this driver as a module, choose M here: the | |
170 | module will be called sony-btf-mpx. | |
171 | ||
cb7a01ac MCC |
172 | comment "RDS decoders" |
173 | ||
174 | config VIDEO_SAA6588 | |
175 | tristate "SAA6588 Radio Chip RDS decoder support" | |
176 | depends on VIDEO_V4L2 && I2C | |
177 | ||
178 | help | |
179 | Support for this Radio Data System (RDS) decoder. This allows | |
180 | seeing radio station identification transmitted using this | |
181 | standard. | |
182 | ||
183 | To compile this driver as a module, choose M here: the | |
184 | module will be called saa6588. | |
185 | ||
186 | comment "Video decoders" | |
187 | ||
188 | config VIDEO_ADV7180 | |
189 | tristate "Analog Devices ADV7180 decoder" | |
65d9e14a | 190 | depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
cb7a01ac MCC |
191 | ---help--- |
192 | Support for the Analog Devices ADV7180 video decoder. | |
193 | ||
194 | To compile this driver as a module, choose M here: the | |
195 | module will be called adv7180. | |
196 | ||
197 | config VIDEO_ADV7183 | |
198 | tristate "Analog Devices ADV7183 decoder" | |
199 | depends on VIDEO_V4L2 && I2C | |
200 | ---help--- | |
201 | V4l2 subdevice driver for the Analog Devices | |
202 | ADV7183 video decoder. | |
203 | ||
204 | To compile this driver as a module, choose M here: the | |
205 | module will be called adv7183. | |
206 | ||
54450f59 HV |
207 | config VIDEO_ADV7604 |
208 | tristate "Analog Devices ADV7604 decoder" | |
2f8e75d2 GU |
209 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
210 | depends on GPIOLIB || COMPILE_TEST | |
516613c1 | 211 | select HDMI |
859969b3 | 212 | select V4L2_FWNODE |
54450f59 HV |
213 | ---help--- |
214 | Support for the Analog Devices ADV7604 video decoder. | |
215 | ||
216 | This is a Analog Devices Component/Graphics Digitizer | |
217 | with 4:1 Multiplexed HDMI Receiver. | |
218 | ||
219 | To compile this driver as a module, choose M here: the | |
220 | module will be called adv7604. | |
221 | ||
41a52373 HV |
222 | config VIDEO_ADV7604_CEC |
223 | bool "Enable Analog Devices ADV7604 CEC support" | |
9177e51d HV |
224 | depends on VIDEO_ADV7604 |
225 | select CEC_CORE | |
41a52373 HV |
226 | ---help--- |
227 | When selected the adv7604 will support the optional | |
228 | HDMI CEC feature. | |
229 | ||
a89bcd4c HV |
230 | config VIDEO_ADV7842 |
231 | tristate "Analog Devices ADV7842 decoder" | |
584ca025 | 232 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
09f90c53 | 233 | select HDMI |
a89bcd4c HV |
234 | ---help--- |
235 | Support for the Analog Devices ADV7842 video decoder. | |
236 | ||
237 | This is a Analog Devices Component/Graphics/SD Digitizer | |
238 | with 2:1 Multiplexed HDMI Receiver. | |
239 | ||
240 | To compile this driver as a module, choose M here: the | |
241 | module will be called adv7842. | |
242 | ||
25c84fb1 HV |
243 | config VIDEO_ADV7842_CEC |
244 | bool "Enable Analog Devices ADV7842 CEC support" | |
9177e51d HV |
245 | depends on VIDEO_ADV7842 |
246 | select CEC_CORE | |
25c84fb1 HV |
247 | ---help--- |
248 | When selected the adv7842 will support the optional | |
249 | HDMI CEC feature. | |
250 | ||
cb7a01ac MCC |
251 | config VIDEO_BT819 |
252 | tristate "BT819A VideoStream decoder" | |
253 | depends on VIDEO_V4L2 && I2C | |
254 | ---help--- | |
255 | Support for BT819A video decoder. | |
256 | ||
257 | To compile this driver as a module, choose M here: the | |
258 | module will be called bt819. | |
259 | ||
260 | config VIDEO_BT856 | |
261 | tristate "BT856 VideoStream decoder" | |
262 | depends on VIDEO_V4L2 && I2C | |
263 | ---help--- | |
264 | Support for BT856 video decoder. | |
265 | ||
266 | To compile this driver as a module, choose M here: the | |
267 | module will be called bt856. | |
268 | ||
269 | config VIDEO_BT866 | |
270 | tristate "BT866 VideoStream decoder" | |
271 | depends on VIDEO_V4L2 && I2C | |
272 | ---help--- | |
273 | Support for BT866 video decoder. | |
274 | ||
275 | To compile this driver as a module, choose M here: the | |
276 | module will be called bt866. | |
277 | ||
278 | config VIDEO_KS0127 | |
279 | tristate "KS0127 video decoder" | |
280 | depends on VIDEO_V4L2 && I2C | |
281 | ---help--- | |
282 | Support for KS0127 video decoder. | |
283 | ||
284 | This chip is used on AverMedia AVS6EYES Zoran-based MJPEG | |
285 | cards. | |
286 | ||
287 | To compile this driver as a module, choose M here: the | |
288 | module will be called ks0127. | |
289 | ||
ed3e12d2 VB |
290 | config VIDEO_ML86V7667 |
291 | tristate "OKI ML86V7667 video decoder" | |
292 | depends on VIDEO_V4L2 && I2C | |
293 | ---help--- | |
294 | Support for the OKI Semiconductor ML86V7667 video decoder. | |
295 | ||
296 | To compile this driver as a module, choose M here: the | |
297 | module will be called ml86v7667. | |
298 | ||
bee3d511 PM |
299 | config VIDEO_AD5820 |
300 | tristate "AD5820 lens voice coil support" | |
301 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
302 | ---help--- | |
303 | This is a driver for the AD5820 camera lens voice coil. | |
304 | It is used for example in Nokia N900 (RX-51). | |
305 | ||
cc95d342 RM |
306 | config VIDEO_DW9714 |
307 | tristate "DW9714 lens voice coil support" | |
308 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
309 | depends on VIDEO_V4L2_SUBDEV_API | |
310 | ---help--- | |
311 | This is a driver for the DW9714 camera lens voice coil. | |
312 | DW9714 is a 10 bit DAC with 120mA output current sink | |
313 | capability. This is designed for linear control of | |
314 | voice coil motors, controlled via I2C serial interface. | |
315 | ||
cb7a01ac MCC |
316 | config VIDEO_SAA7110 |
317 | tristate "Philips SAA7110 video decoder" | |
318 | depends on VIDEO_V4L2 && I2C | |
319 | ---help--- | |
320 | Support for the Philips SAA7110 video decoders. | |
321 | ||
322 | To compile this driver as a module, choose M here: the | |
323 | module will be called saa7110. | |
324 | ||
325 | config VIDEO_SAA711X | |
326 | tristate "Philips SAA7111/3/4/5 video decoders" | |
327 | depends on VIDEO_V4L2 && I2C | |
328 | ---help--- | |
329 | Support for the Philips SAA7111/3/4/5 video decoders. | |
330 | ||
331 | To compile this driver as a module, choose M here: the | |
332 | module will be called saa7115. | |
333 | ||
d32d9864 MR |
334 | config VIDEO_TC358743 |
335 | tristate "Toshiba TC358743 decoder" | |
22dbe35a HV |
336 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
337 | select HDMI | |
859969b3 | 338 | select V4L2_FWNODE |
d32d9864 MR |
339 | ---help--- |
340 | Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge. | |
341 | ||
342 | To compile this driver as a module, choose M here: the | |
343 | module will be called tc358743. | |
344 | ||
cb7a01ac MCC |
345 | config VIDEO_TVP514X |
346 | tristate "Texas Instruments TVP514x video decoder" | |
347 | depends on VIDEO_V4L2 && I2C | |
859969b3 | 348 | select V4L2_FWNODE |
cb7a01ac MCC |
349 | ---help--- |
350 | This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 | |
351 | decoder. It is currently working with the TI OMAP3 camera | |
352 | controller. | |
353 | ||
354 | To compile this driver as a module, choose M here: the | |
355 | module will be called tvp514x. | |
356 | ||
357 | config VIDEO_TVP5150 | |
358 | tristate "Texas Instruments TVP5150 video decoder" | |
359 | depends on VIDEO_V4L2 && I2C | |
859969b3 | 360 | select V4L2_FWNODE |
cb7a01ac MCC |
361 | ---help--- |
362 | Support for the Texas Instruments TVP5150 video decoder. | |
363 | ||
364 | To compile this driver as a module, choose M here: the | |
365 | module will be called tvp5150. | |
366 | ||
367 | config VIDEO_TVP7002 | |
368 | tristate "Texas Instruments TVP7002 video decoder" | |
369 | depends on VIDEO_V4L2 && I2C | |
859969b3 | 370 | select V4L2_FWNODE |
cb7a01ac MCC |
371 | ---help--- |
372 | Support for the Texas Instruments TVP7002 video decoder. | |
373 | ||
374 | To compile this driver as a module, choose M here: the | |
375 | module will be called tvp7002. | |
376 | ||
12be52a9 HV |
377 | config VIDEO_TW2804 |
378 | tristate "Techwell TW2804 multiple video decoder" | |
379 | depends on VIDEO_V4L2 && I2C | |
380 | ---help--- | |
381 | Support for the Techwell tw2804 multiple video decoder. | |
382 | ||
383 | To compile this driver as a module, choose M here: the | |
384 | module will be called tw2804. | |
385 | ||
0890ec19 HV |
386 | config VIDEO_TW9903 |
387 | tristate "Techwell TW9903 video decoder" | |
388 | depends on VIDEO_V4L2 && I2C | |
389 | ---help--- | |
12be52a9 | 390 | Support for the Techwell tw9903 multi-standard video decoder |
0890ec19 HV |
391 | with high quality down scaler. |
392 | ||
393 | To compile this driver as a module, choose M here: the | |
394 | module will be called tw9903. | |
395 | ||
a000e9a0 HV |
396 | config VIDEO_TW9906 |
397 | tristate "Techwell TW9906 video decoder" | |
398 | depends on VIDEO_V4L2 && I2C | |
399 | ---help--- | |
400 | Support for the Techwell tw9906 enhanced multi-standard comb filter | |
401 | video decoder with YCbCr input support. | |
402 | ||
403 | To compile this driver as a module, choose M here: the | |
404 | module will be called tw9906. | |
405 | ||
cb7a01ac MCC |
406 | config VIDEO_VPX3220 |
407 | tristate "vpx3220a, vpx3216b & vpx3214c video decoders" | |
408 | depends on VIDEO_V4L2 && I2C | |
409 | ---help--- | |
410 | Support for VPX322x video decoders. | |
411 | ||
412 | To compile this driver as a module, choose M here: the | |
413 | module will be called vpx3220. | |
414 | ||
415 | comment "Video and audio decoders" | |
416 | ||
417 | config VIDEO_SAA717X | |
418 | tristate "Philips SAA7171/3/4 audio/video decoders" | |
419 | depends on VIDEO_V4L2 && I2C | |
420 | ---help--- | |
421 | Support for the Philips SAA7171/3/4 audio/video decoders. | |
422 | ||
423 | To compile this driver as a module, choose M here: the | |
424 | module will be called saa717x. | |
425 | ||
426 | source "drivers/media/i2c/cx25840/Kconfig" | |
427 | ||
cb7a01ac MCC |
428 | comment "Video encoders" |
429 | ||
430 | config VIDEO_SAA7127 | |
431 | tristate "Philips SAA7127/9 digital video encoders" | |
432 | depends on VIDEO_V4L2 && I2C | |
433 | ---help--- | |
434 | Support for the Philips SAA7127/9 digital video encoders. | |
435 | ||
436 | To compile this driver as a module, choose M here: the | |
437 | module will be called saa7127. | |
438 | ||
439 | config VIDEO_SAA7185 | |
440 | tristate "Philips SAA7185 video encoder" | |
441 | depends on VIDEO_V4L2 && I2C | |
442 | ---help--- | |
443 | Support for the Philips SAA7185 video encoder. | |
444 | ||
445 | To compile this driver as a module, choose M here: the | |
446 | module will be called saa7185. | |
447 | ||
448 | config VIDEO_ADV7170 | |
449 | tristate "Analog Devices ADV7170 video encoder" | |
450 | depends on VIDEO_V4L2 && I2C | |
451 | ---help--- | |
452 | Support for the Analog Devices ADV7170 video encoder driver | |
453 | ||
454 | To compile this driver as a module, choose M here: the | |
455 | module will be called adv7170. | |
456 | ||
457 | config VIDEO_ADV7175 | |
458 | tristate "Analog Devices ADV7175 video encoder" | |
459 | depends on VIDEO_V4L2 && I2C | |
460 | ---help--- | |
461 | Support for the Analog Devices ADV7175 video encoder driver | |
462 | ||
463 | To compile this driver as a module, choose M here: the | |
464 | module will be called adv7175. | |
465 | ||
466 | config VIDEO_ADV7343 | |
467 | tristate "ADV7343 video encoder" | |
468 | depends on I2C | |
469 | help | |
470 | Support for Analog Devices I2C bus based ADV7343 encoder. | |
471 | ||
472 | To compile this driver as a module, choose M here: the | |
473 | module will be called adv7343. | |
474 | ||
475 | config VIDEO_ADV7393 | |
476 | tristate "ADV7393 video encoder" | |
477 | depends on I2C | |
478 | help | |
479 | Support for Analog Devices I2C bus based ADV7393 encoder. | |
480 | ||
481 | To compile this driver as a module, choose M here: the | |
482 | module will be called adv7393. | |
483 | ||
5a544cce HV |
484 | config VIDEO_ADV7511 |
485 | tristate "Analog Devices ADV7511 encoder" | |
584ca025 | 486 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
b4dbad8f | 487 | select HDMI |
5a544cce HV |
488 | ---help--- |
489 | Support for the Analog Devices ADV7511 video encoder. | |
490 | ||
491 | This is a Analog Devices HDMI transmitter. | |
492 | ||
493 | To compile this driver as a module, choose M here: the | |
494 | module will be called adv7511. | |
495 | ||
257d4eae HV |
496 | config VIDEO_ADV7511_CEC |
497 | bool "Enable Analog Devices ADV7511 CEC support" | |
9177e51d HV |
498 | depends on VIDEO_ADV7511 |
499 | select CEC_CORE | |
257d4eae HV |
500 | ---help--- |
501 | When selected the adv7511 will support the optional | |
502 | HDMI CEC feature. | |
503 | ||
117a55b6 HV |
504 | config VIDEO_AD9389B |
505 | tristate "Analog Devices AD9389B encoder" | |
506 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
507 | ---help--- | |
508 | Support for the Analog Devices AD9389B video encoder. | |
509 | ||
510 | This is a Analog Devices HDMI transmitter. | |
511 | ||
512 | To compile this driver as a module, choose M here: the | |
513 | module will be called ad9389b. | |
514 | ||
cb7a01ac MCC |
515 | config VIDEO_AK881X |
516 | tristate "AK8813/AK8814 video encoders" | |
517 | depends on I2C | |
518 | help | |
519 | Video output driver for AKM AK8813 and AK8814 TV encoders | |
520 | ||
14735190 HV |
521 | config VIDEO_THS8200 |
522 | tristate "Texas Instruments THS8200 video encoder" | |
523 | depends on VIDEO_V4L2 && I2C | |
524 | ---help--- | |
525 | Support for the Texas Instruments THS8200 video encoder. | |
526 | ||
527 | To compile this driver as a module, choose M here: the | |
528 | module will be called ths8200. | |
529 | ||
cb7a01ac MCC |
530 | comment "Camera sensor devices" |
531 | ||
532 | config VIDEO_APTINA_PLL | |
533 | tristate | |
534 | ||
535 | config VIDEO_SMIAPP_PLL | |
536 | tristate | |
537 | ||
34aa8879 HV |
538 | config VIDEO_OV2640 |
539 | tristate "OmniVision OV2640 sensor support" | |
a463ea99 | 540 | depends on VIDEO_V4L2 && I2C |
34aa8879 HV |
541 | depends on MEDIA_CAMERA_SUPPORT |
542 | help | |
543 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
544 | OV2640 camera. | |
545 | ||
546 | To compile this driver as a module, choose M here: the | |
547 | module will be called ov2640. | |
548 | ||
c4c0283a BP |
549 | config VIDEO_OV2659 |
550 | tristate "OmniVision OV2659 sensor support" | |
551 | depends on VIDEO_V4L2 && I2C | |
552 | depends on MEDIA_CAMERA_SUPPORT | |
859969b3 | 553 | select V4L2_FWNODE |
c4c0283a BP |
554 | ---help--- |
555 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
556 | OV2659 camera. | |
557 | ||
558 | To compile this driver as a module, choose M here: the | |
559 | module will be called ov2659. | |
560 | ||
19a81c14 SL |
561 | config VIDEO_OV5640 |
562 | tristate "OmniVision OV5640 sensor support" | |
563 | depends on OF | |
564 | depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
565 | depends on MEDIA_CAMERA_SUPPORT | |
566 | select V4L2_FWNODE | |
567 | ---help--- | |
568 | This is a Video4Linux2 sensor-level driver for the Omnivision | |
569 | OV5640 camera sensor with a MIPI CSI-2 interface. | |
570 | ||
9cae9722 TT |
571 | config VIDEO_OV5645 |
572 | tristate "OmniVision OV5645 sensor support" | |
573 | depends on OF | |
574 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
575 | depends on MEDIA_CAMERA_SUPPORT | |
859969b3 | 576 | select V4L2_FWNODE |
9cae9722 TT |
577 | ---help--- |
578 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
579 | OV5645 camera. | |
580 | ||
581 | To compile this driver as a module, choose M here: the | |
582 | module will be called ov5645. | |
583 | ||
3c2472a3 RO |
584 | config VIDEO_OV5647 |
585 | tristate "OmniVision OV5647 sensor support" | |
586 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
587 | depends on MEDIA_CAMERA_SUPPORT | |
859969b3 | 588 | select V4L2_FWNODE |
3c2472a3 RO |
589 | ---help--- |
590 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
591 | OV5647 camera. | |
592 | ||
593 | To compile this driver as a module, choose M here: the | |
594 | module will be called ov5647. | |
595 | ||
ec367c3c HV |
596 | config VIDEO_OV7640 |
597 | tristate "OmniVision OV7640 sensor support" | |
598 | depends on I2C && VIDEO_V4L2 | |
599 | depends on MEDIA_CAMERA_SUPPORT | |
600 | ---help--- | |
601 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
602 | OV7640 camera. | |
603 | ||
604 | To compile this driver as a module, choose M here: the | |
605 | module will be called ov7640. | |
606 | ||
cb7a01ac MCC |
607 | config VIDEO_OV7670 |
608 | tristate "OmniVision OV7670 sensor support" | |
609 | depends on I2C && VIDEO_V4L2 | |
610 | depends on MEDIA_CAMERA_SUPPORT | |
611 | ---help--- | |
612 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
613 | OV7670 VGA camera. It currently only works with the M88ALP01 | |
614 | controller. | |
615 | ||
84a15ded SN |
616 | config VIDEO_OV9650 |
617 | tristate "OmniVision OV9650/OV9652 sensor support" | |
618 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
619 | ---help--- | |
620 | This is a V4L2 sensor-level driver for the Omnivision | |
621 | OV9650 and OV9652 camera sensors. | |
622 | ||
5fcf092e HY |
623 | config VIDEO_OV13858 |
624 | tristate "OmniVision OV13858 sensor support" | |
625 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
626 | depends on MEDIA_CAMERA_SUPPORT | |
627 | ---help--- | |
628 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
629 | OV13858 camera. | |
630 | ||
cb7a01ac MCC |
631 | config VIDEO_VS6624 |
632 | tristate "ST VS6624 sensor support" | |
633 | depends on VIDEO_V4L2 && I2C | |
634 | depends on MEDIA_CAMERA_SUPPORT | |
635 | ---help--- | |
636 | This is a Video4Linux2 sensor-level driver for the ST VS6624 | |
637 | camera. | |
638 | ||
639 | To compile this driver as a module, choose M here: the | |
640 | module will be called vs6624. | |
641 | ||
642 | config VIDEO_MT9M032 | |
643 | tristate "MT9M032 camera sensor support" | |
644 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
645 | depends on MEDIA_CAMERA_SUPPORT | |
646 | select VIDEO_APTINA_PLL | |
647 | ---help--- | |
648 | This driver supports MT9M032 camera sensors from Aptina, monochrome | |
649 | models only. | |
650 | ||
c61e74e3 RJ |
651 | config VIDEO_MT9M111 |
652 | tristate "mt9m111, mt9m112 and mt9m131 support" | |
653 | depends on I2C && VIDEO_V4L2 | |
654 | help | |
655 | This driver supports MT9M111, MT9M112 and MT9M131 cameras from | |
656 | Micron/Aptina | |
657 | ||
cb7a01ac MCC |
658 | config VIDEO_MT9P031 |
659 | tristate "Aptina MT9P031 support" | |
660 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
661 | depends on MEDIA_CAMERA_SUPPORT | |
662 | select VIDEO_APTINA_PLL | |
663 | ---help--- | |
664 | This is a Video4Linux2 sensor-level driver for the Aptina | |
665 | (Micron) mt9p031 5 Mpixel camera. | |
666 | ||
667 | config VIDEO_MT9T001 | |
668 | tristate "Aptina MT9T001 support" | |
669 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
670 | depends on MEDIA_CAMERA_SUPPORT | |
671 | ---help--- | |
672 | This is a Video4Linux2 sensor-level driver for the Aptina | |
673 | (Micron) mt0t001 3 Mpixel camera. | |
674 | ||
675 | config VIDEO_MT9V011 | |
676 | tristate "Micron mt9v011 sensor support" | |
677 | depends on I2C && VIDEO_V4L2 | |
678 | depends on MEDIA_CAMERA_SUPPORT | |
679 | ---help--- | |
680 | This is a Video4Linux2 sensor-level driver for the Micron | |
681 | mt0v011 1.3 Mpixel camera. It currently only works with the | |
682 | em28xx driver. | |
683 | ||
684 | config VIDEO_MT9V032 | |
685 | tristate "Micron MT9V032 sensor support" | |
686 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
687 | depends on MEDIA_CAMERA_SUPPORT | |
80b44ef2 | 688 | select REGMAP_I2C |
859969b3 | 689 | select V4L2_FWNODE |
cb7a01ac MCC |
690 | ---help--- |
691 | This is a Video4Linux2 sensor-level driver for the Micron | |
692 | MT9V032 752x480 CMOS sensor. | |
693 | ||
cb7a01ac MCC |
694 | config VIDEO_SR030PC30 |
695 | tristate "Siliconfile SR030PC30 sensor support" | |
696 | depends on I2C && VIDEO_V4L2 | |
697 | depends on MEDIA_CAMERA_SUPPORT | |
698 | ---help--- | |
699 | This driver supports SR030PC30 VGA camera from Siliconfile | |
700 | ||
701 | config VIDEO_NOON010PC30 | |
702 | tristate "Siliconfile NOON010PC30 sensor support" | |
2cca7d4e | 703 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
cb7a01ac MCC |
704 | depends on MEDIA_CAMERA_SUPPORT |
705 | ---help--- | |
706 | This driver supports NOON010PC30 CIF camera from Siliconfile | |
707 | ||
708 | source "drivers/media/i2c/m5mols/Kconfig" | |
709 | ||
710 | config VIDEO_S5K6AA | |
711 | tristate "Samsung S5K6AAFX sensor support" | |
712 | depends on MEDIA_CAMERA_SUPPORT | |
713 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
714 | ---help--- | |
715 | This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M | |
716 | camera sensor with an embedded SoC image signal processor. | |
717 | ||
814b4dd9 SN |
718 | config VIDEO_S5K6A3 |
719 | tristate "Samsung S5K6A3 sensor support" | |
720 | depends on MEDIA_CAMERA_SUPPORT | |
721 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
722 | ---help--- | |
723 | This is a V4L2 sensor-level driver for Samsung S5K6A3 raw | |
724 | camera sensor. | |
725 | ||
8b99312b SL |
726 | config VIDEO_S5K4ECGX |
727 | tristate "Samsung S5K4ECGX sensor support" | |
728 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
c739c0a7 | 729 | select CRC32 |
8b99312b SL |
730 | ---help--- |
731 | This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M | |
732 | camera sensor with an embedded SoC image signal processor. | |
733 | ||
7d459937 AH |
734 | config VIDEO_S5K5BAF |
735 | tristate "Samsung S5K5BAF sensor support" | |
736 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
859969b3 | 737 | select V4L2_FWNODE |
7d459937 AH |
738 | ---help--- |
739 | This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M | |
740 | camera sensor with an embedded SoC image signal processor. | |
741 | ||
cb7a01ac | 742 | source "drivers/media/i2c/smiapp/Kconfig" |
c5254e72 | 743 | source "drivers/media/i2c/et8ek8/Kconfig" |
cb7a01ac | 744 | |
cac47f18 AH |
745 | config VIDEO_S5C73M3 |
746 | tristate "Samsung S5C73M3 sensor support" | |
747 | depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
859969b3 | 748 | select V4L2_FWNODE |
cac47f18 | 749 | ---help--- |
4494f0fd GG |
750 | This is a V4L2 sensor-level driver for Samsung S5C73M3 |
751 | 8 Mpixel camera. | |
cac47f18 | 752 | |
cb7a01ac MCC |
753 | comment "Flash devices" |
754 | ||
755 | config VIDEO_ADP1653 | |
756 | tristate "ADP1653 flash support" | |
757 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
758 | depends on MEDIA_CAMERA_SUPPORT | |
759 | ---help--- | |
760 | This is a driver for the ADP1653 flash controller. It is used for | |
761 | example in Nokia N900. | |
762 | ||
763 | config VIDEO_AS3645A | |
764 | tristate "AS3645A flash driver support" | |
765 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
766 | depends on MEDIA_CAMERA_SUPPORT | |
767 | ---help--- | |
768 | This is a driver for the AS3645A and LM3555 flash controllers. It has | |
769 | build in control for flash, torch and indicator LEDs. | |
770 | ||
7f6b11a1 DJ |
771 | config VIDEO_LM3560 |
772 | tristate "LM3560 dual flash driver support" | |
773 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
774 | depends on MEDIA_CAMERA_SUPPORT | |
775 | select REGMAP_I2C | |
776 | ---help--- | |
777 | This is a driver for the lm3560 dual flash controllers. It controls | |
778 | flash, torch LEDs. | |
779 | ||
dc76df5d DJ |
780 | config VIDEO_LM3646 |
781 | tristate "LM3646 dual flash driver support" | |
782 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
783 | depends on MEDIA_CAMERA_SUPPORT | |
784 | select REGMAP_I2C | |
785 | ---help--- | |
786 | This is a driver for the lm3646 dual flash controllers. It controls | |
787 | flash, torch LEDs. | |
788 | ||
cb7a01ac MCC |
789 | comment "Video improvement chips" |
790 | ||
791 | config VIDEO_UPD64031A | |
792 | tristate "NEC Electronics uPD64031A Ghost Reduction" | |
793 | depends on VIDEO_V4L2 && I2C | |
794 | ---help--- | |
795 | Support for the NEC Electronics uPD64031A Ghost Reduction | |
796 | video chip. It is most often found in NTSC TV cards made for | |
797 | Japan and is used to reduce the 'ghosting' effect that can | |
798 | be present in analog TV broadcasts. | |
799 | ||
800 | To compile this driver as a module, choose M here: the | |
801 | module will be called upd64031a. | |
802 | ||
803 | config VIDEO_UPD64083 | |
804 | tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" | |
805 | depends on VIDEO_V4L2 && I2C | |
806 | ---help--- | |
807 | Support for the NEC Electronics uPD64083 3-Dimensional Y/C | |
808 | separation video chip. It is used to improve the quality of | |
809 | the colors of a composite signal. | |
810 | ||
811 | To compile this driver as a module, choose M here: the | |
812 | module will be called upd64083. | |
813 | ||
6052ba35 HV |
814 | comment "Audio/Video compression chips" |
815 | ||
816 | config VIDEO_SAA6752HS | |
817 | tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" | |
818 | depends on VIDEO_V4L2 && I2C | |
d984d325 | 819 | select CRC32 |
6052ba35 HV |
820 | ---help--- |
821 | Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 | |
822 | audio encoder with multiplexer. | |
823 | ||
824 | To compile this driver as a module, choose M here: the | |
825 | module will be called saa6752hs. | |
826 | ||
b47b79d8 RS |
827 | comment "SDR tuner chips" |
828 | ||
829 | config SDR_MAX2175 | |
830 | tristate "Maxim 2175 RF to Bits tuner" | |
831 | depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C | |
832 | ---help--- | |
833 | Support for Maxim 2175 tuner. It is an advanced analog/digital | |
834 | radio receiver with RF-to-Bits front-end designed for SDR solutions. | |
835 | ||
836 | To compile this driver as a module, choose M here; the | |
837 | module will be called max2175. | |
838 | ||
8c88126b | 839 | comment "Miscellaneous helper chips" |
cb7a01ac MCC |
840 | |
841 | config VIDEO_THS7303 | |
88da0183 LP |
842 | tristate "THS7303/53 Video Amplifier" |
843 | depends on VIDEO_V4L2 && I2C | |
cb7a01ac | 844 | help |
88da0183 | 845 | Support for TI THS7303/53 video amplifier |
cb7a01ac MCC |
846 | |
847 | To compile this driver as a module, choose M here: the | |
848 | module will be called ths7303. | |
849 | ||
850 | config VIDEO_M52790 | |
851 | tristate "Mitsubishi M52790 A/V switch" | |
852 | depends on VIDEO_V4L2 && I2C | |
853 | ---help--- | |
854 | Support for the Mitsubishi M52790 A/V switch. | |
855 | ||
856 | To compile this driver as a module, choose M here: the | |
857 | module will be called m52790. | |
fccea74f | 858 | endmenu |
e9d2f057 | 859 | |
fccea74f | 860 | menu "Sensors used on soc_camera driver" |
cb7a01ac | 861 | |
2a2d1cf4 MCC |
862 | if SOC_CAMERA |
863 | source "drivers/media/i2c/soc_camera/Kconfig" | |
864 | endif | |
865 | ||
cb7a01ac | 866 | endmenu |
fccea74f | 867 | |
cb7a01ac | 868 | endif |