]>
Commit | Line | Data |
---|---|---|
cb7a01ac MCC |
1 | # |
2 | # Multimedia Video device configuration | |
3 | # | |
4 | ||
5 | if VIDEO_V4L2 | |
6 | ||
cb7a01ac | 7 | config VIDEO_IR_I2C |
fccea74f | 8 | tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT |
cb7a01ac MCC |
9 | depends on I2C && RC_CORE |
10 | default y | |
11 | ---help--- | |
12 | Most boards have an IR chip directly connected via GPIO. However, | |
13 | some video boards have the IR connected via I2C bus. | |
14 | ||
15 | If your board doesn't have an I2C IR chip, you may disable this | |
16 | option. | |
17 | ||
18 | In doubt, say Y. | |
19 | ||
20 | # | |
21 | # Encoder / Decoder module configuration | |
22 | # | |
23 | ||
24 | menu "Encoders, decoders, sensors and other helper chips" | |
5cc596c6 | 25 | visible if !MEDIA_SUBDRV_AUTOSELECT || COMPILE_TEST |
cb7a01ac MCC |
26 | |
27 | comment "Audio decoders, processors and mixers" | |
28 | ||
29 | config VIDEO_TVAUDIO | |
30 | tristate "Simple audio decoder chips" | |
31 | depends on VIDEO_V4L2 && I2C | |
32 | ---help--- | |
33 | Support for several audio decoder chips found on some bt8xx boards: | |
34 | Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, | |
35 | tea6320, tea6420, tda8425, ta8874z. | |
36 | Microchip: pic16c54 based design on ProVideo PV951 board. | |
37 | ||
38 | To compile this driver as a module, choose M here: the | |
39 | module will be called tvaudio. | |
40 | ||
41 | config VIDEO_TDA7432 | |
42 | tristate "Philips TDA7432 audio processor" | |
43 | depends on VIDEO_V4L2 && I2C | |
44 | ---help--- | |
45 | Support for tda7432 audio decoder chip found on some bt8xx boards. | |
46 | ||
47 | To compile this driver as a module, choose M here: the | |
48 | module will be called tda7432. | |
49 | ||
50 | config VIDEO_TDA9840 | |
51 | tristate "Philips TDA9840 audio processor" | |
52 | depends on I2C | |
53 | ---help--- | |
54 | Support for tda9840 audio decoder chip found on some Zoran boards. | |
55 | ||
56 | To compile this driver as a module, choose M here: the | |
57 | module will be called tda9840. | |
58 | ||
59 | config VIDEO_TEA6415C | |
60 | tristate "Philips TEA6415C audio processor" | |
61 | depends on I2C | |
62 | ---help--- | |
63 | Support for tea6415c audio decoder chip found on some bt8xx boards. | |
64 | ||
65 | To compile this driver as a module, choose M here: the | |
66 | module will be called tea6415c. | |
67 | ||
68 | config VIDEO_TEA6420 | |
69 | tristate "Philips TEA6420 audio processor" | |
70 | depends on I2C | |
71 | ---help--- | |
72 | Support for tea6420 audio decoder chip found on some bt8xx boards. | |
73 | ||
74 | To compile this driver as a module, choose M here: the | |
75 | module will be called tea6420. | |
76 | ||
77 | config VIDEO_MSP3400 | |
78 | tristate "Micronas MSP34xx audio decoders" | |
79 | depends on VIDEO_V4L2 && I2C | |
80 | ---help--- | |
81 | Support for the Micronas MSP34xx series of audio decoders. | |
82 | ||
83 | To compile this driver as a module, choose M here: the | |
84 | module will be called msp3400. | |
85 | ||
fc279cc2 HV |
86 | config VIDEO_CS3308 |
87 | tristate "Cirrus Logic CS3308 audio ADC" | |
88 | depends on VIDEO_V4L2 && I2C | |
89 | ---help--- | |
90 | Support for the Cirrus Logic CS3308 High Performance 8-Channel | |
91 | Analog Volume Control | |
92 | ||
93 | To compile this driver as a module, choose M here: the | |
94 | module will be called cs3308. | |
95 | ||
cb7a01ac MCC |
96 | config VIDEO_CS5345 |
97 | tristate "Cirrus Logic CS5345 audio ADC" | |
98 | depends on VIDEO_V4L2 && I2C | |
99 | ---help--- | |
100 | Support for the Cirrus Logic CS5345 24-bit, 192 kHz | |
101 | stereo A/D converter. | |
102 | ||
103 | To compile this driver as a module, choose M here: the | |
104 | module will be called cs5345. | |
105 | ||
106 | config VIDEO_CS53L32A | |
107 | tristate "Cirrus Logic CS53L32A audio ADC" | |
108 | depends on VIDEO_V4L2 && I2C | |
109 | ---help--- | |
110 | Support for the Cirrus Logic CS53L32A low voltage | |
111 | stereo A/D converter. | |
112 | ||
113 | To compile this driver as a module, choose M here: the | |
114 | module will be called cs53l32a. | |
115 | ||
116 | config VIDEO_TLV320AIC23B | |
117 | tristate "Texas Instruments TLV320AIC23B audio codec" | |
2cca7d4e | 118 | depends on VIDEO_V4L2 && I2C |
cb7a01ac MCC |
119 | ---help--- |
120 | Support for the Texas Instruments TLV320AIC23B audio codec. | |
121 | ||
122 | To compile this driver as a module, choose M here: the | |
123 | module will be called tlv320aic23b. | |
124 | ||
73d9f979 HV |
125 | config VIDEO_UDA1342 |
126 | tristate "Philips UDA1342 audio codec" | |
127 | depends on VIDEO_V4L2 && I2C | |
128 | ---help--- | |
129 | Support for the Philips UDA1342 audio codec. | |
130 | ||
131 | To compile this driver as a module, choose M here: the | |
132 | module will be called uda1342. | |
133 | ||
cb7a01ac MCC |
134 | config VIDEO_WM8775 |
135 | tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" | |
136 | depends on VIDEO_V4L2 && I2C | |
137 | ---help--- | |
138 | Support for the Wolfson Microelectronics WM8775 high | |
139 | performance stereo A/D Converter with a 4 channel input mixer. | |
140 | ||
141 | To compile this driver as a module, choose M here: the | |
142 | module will be called wm8775. | |
143 | ||
144 | config VIDEO_WM8739 | |
145 | tristate "Wolfson Microelectronics WM8739 stereo audio ADC" | |
146 | depends on VIDEO_V4L2 && I2C | |
147 | ---help--- | |
148 | Support for the Wolfson Microelectronics WM8739 | |
149 | stereo A/D Converter. | |
150 | ||
151 | To compile this driver as a module, choose M here: the | |
152 | module will be called wm8739. | |
153 | ||
154 | config VIDEO_VP27SMPX | |
c7c54a98 | 155 | tristate "Panasonic VP27's internal MPX" |
cb7a01ac MCC |
156 | depends on VIDEO_V4L2 && I2C |
157 | ---help--- | |
158 | Support for the internal MPX of the Panasonic VP27s tuner. | |
159 | ||
160 | To compile this driver as a module, choose M here: the | |
161 | module will be called vp27smpx. | |
162 | ||
c7c54a98 HV |
163 | config VIDEO_SONY_BTF_MPX |
164 | tristate "Sony BTF's internal MPX" | |
165 | depends on VIDEO_V4L2 && I2C | |
166 | help | |
167 | Support for the internal MPX of the Sony BTF-PG472Z tuner. | |
168 | ||
169 | To compile this driver as a module, choose M here: the | |
170 | module will be called sony-btf-mpx. | |
171 | ||
cb7a01ac MCC |
172 | comment "RDS decoders" |
173 | ||
174 | config VIDEO_SAA6588 | |
175 | tristate "SAA6588 Radio Chip RDS decoder support" | |
176 | depends on VIDEO_V4L2 && I2C | |
177 | ||
178 | help | |
179 | Support for this Radio Data System (RDS) decoder. This allows | |
180 | seeing radio station identification transmitted using this | |
181 | standard. | |
182 | ||
183 | To compile this driver as a module, choose M here: the | |
184 | module will be called saa6588. | |
185 | ||
186 | comment "Video decoders" | |
187 | ||
188 | config VIDEO_ADV7180 | |
189 | tristate "Analog Devices ADV7180 decoder" | |
d5d51a82 | 190 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
cb7a01ac MCC |
191 | ---help--- |
192 | Support for the Analog Devices ADV7180 video decoder. | |
193 | ||
194 | To compile this driver as a module, choose M here: the | |
195 | module will be called adv7180. | |
196 | ||
197 | config VIDEO_ADV7183 | |
198 | tristate "Analog Devices ADV7183 decoder" | |
199 | depends on VIDEO_V4L2 && I2C | |
200 | ---help--- | |
201 | V4l2 subdevice driver for the Analog Devices | |
202 | ADV7183 video decoder. | |
203 | ||
204 | To compile this driver as a module, choose M here: the | |
205 | module will be called adv7183. | |
206 | ||
54450f59 HV |
207 | config VIDEO_ADV7604 |
208 | tristate "Analog Devices ADV7604 decoder" | |
2f8e75d2 GU |
209 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
210 | depends on GPIOLIB || COMPILE_TEST | |
516613c1 | 211 | select HDMI |
54450f59 HV |
212 | ---help--- |
213 | Support for the Analog Devices ADV7604 video decoder. | |
214 | ||
215 | This is a Analog Devices Component/Graphics Digitizer | |
216 | with 4:1 Multiplexed HDMI Receiver. | |
217 | ||
218 | To compile this driver as a module, choose M here: the | |
219 | module will be called adv7604. | |
220 | ||
a89bcd4c HV |
221 | config VIDEO_ADV7842 |
222 | tristate "Analog Devices ADV7842 decoder" | |
584ca025 | 223 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
09f90c53 | 224 | select HDMI |
a89bcd4c HV |
225 | ---help--- |
226 | Support for the Analog Devices ADV7842 video decoder. | |
227 | ||
228 | This is a Analog Devices Component/Graphics/SD Digitizer | |
229 | with 2:1 Multiplexed HDMI Receiver. | |
230 | ||
231 | To compile this driver as a module, choose M here: the | |
232 | module will be called adv7842. | |
233 | ||
cb7a01ac MCC |
234 | config VIDEO_BT819 |
235 | tristate "BT819A VideoStream decoder" | |
236 | depends on VIDEO_V4L2 && I2C | |
237 | ---help--- | |
238 | Support for BT819A video decoder. | |
239 | ||
240 | To compile this driver as a module, choose M here: the | |
241 | module will be called bt819. | |
242 | ||
243 | config VIDEO_BT856 | |
244 | tristate "BT856 VideoStream decoder" | |
245 | depends on VIDEO_V4L2 && I2C | |
246 | ---help--- | |
247 | Support for BT856 video decoder. | |
248 | ||
249 | To compile this driver as a module, choose M here: the | |
250 | module will be called bt856. | |
251 | ||
252 | config VIDEO_BT866 | |
253 | tristate "BT866 VideoStream decoder" | |
254 | depends on VIDEO_V4L2 && I2C | |
255 | ---help--- | |
256 | Support for BT866 video decoder. | |
257 | ||
258 | To compile this driver as a module, choose M here: the | |
259 | module will be called bt866. | |
260 | ||
261 | config VIDEO_KS0127 | |
262 | tristate "KS0127 video decoder" | |
263 | depends on VIDEO_V4L2 && I2C | |
264 | ---help--- | |
265 | Support for KS0127 video decoder. | |
266 | ||
267 | This chip is used on AverMedia AVS6EYES Zoran-based MJPEG | |
268 | cards. | |
269 | ||
270 | To compile this driver as a module, choose M here: the | |
271 | module will be called ks0127. | |
272 | ||
ed3e12d2 VB |
273 | config VIDEO_ML86V7667 |
274 | tristate "OKI ML86V7667 video decoder" | |
275 | depends on VIDEO_V4L2 && I2C | |
276 | ---help--- | |
277 | Support for the OKI Semiconductor ML86V7667 video decoder. | |
278 | ||
279 | To compile this driver as a module, choose M here: the | |
280 | module will be called ml86v7667. | |
281 | ||
cb7a01ac MCC |
282 | config VIDEO_SAA7110 |
283 | tristate "Philips SAA7110 video decoder" | |
284 | depends on VIDEO_V4L2 && I2C | |
285 | ---help--- | |
286 | Support for the Philips SAA7110 video decoders. | |
287 | ||
288 | To compile this driver as a module, choose M here: the | |
289 | module will be called saa7110. | |
290 | ||
291 | config VIDEO_SAA711X | |
292 | tristate "Philips SAA7111/3/4/5 video decoders" | |
293 | depends on VIDEO_V4L2 && I2C | |
294 | ---help--- | |
295 | Support for the Philips SAA7111/3/4/5 video decoders. | |
296 | ||
297 | To compile this driver as a module, choose M here: the | |
298 | module will be called saa7115. | |
299 | ||
d32d9864 MR |
300 | config VIDEO_TC358743 |
301 | tristate "Toshiba TC358743 decoder" | |
22dbe35a HV |
302 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
303 | select HDMI | |
d32d9864 MR |
304 | ---help--- |
305 | Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge. | |
306 | ||
307 | To compile this driver as a module, choose M here: the | |
308 | module will be called tc358743. | |
309 | ||
cb7a01ac MCC |
310 | config VIDEO_TVP514X |
311 | tristate "Texas Instruments TVP514x video decoder" | |
312 | depends on VIDEO_V4L2 && I2C | |
313 | ---help--- | |
314 | This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 | |
315 | decoder. It is currently working with the TI OMAP3 camera | |
316 | controller. | |
317 | ||
318 | To compile this driver as a module, choose M here: the | |
319 | module will be called tvp514x. | |
320 | ||
321 | config VIDEO_TVP5150 | |
322 | tristate "Texas Instruments TVP5150 video decoder" | |
323 | depends on VIDEO_V4L2 && I2C | |
324 | ---help--- | |
325 | Support for the Texas Instruments TVP5150 video decoder. | |
326 | ||
327 | To compile this driver as a module, choose M here: the | |
328 | module will be called tvp5150. | |
329 | ||
330 | config VIDEO_TVP7002 | |
331 | tristate "Texas Instruments TVP7002 video decoder" | |
332 | depends on VIDEO_V4L2 && I2C | |
333 | ---help--- | |
334 | Support for the Texas Instruments TVP7002 video decoder. | |
335 | ||
336 | To compile this driver as a module, choose M here: the | |
337 | module will be called tvp7002. | |
338 | ||
12be52a9 HV |
339 | config VIDEO_TW2804 |
340 | tristate "Techwell TW2804 multiple video decoder" | |
341 | depends on VIDEO_V4L2 && I2C | |
342 | ---help--- | |
343 | Support for the Techwell tw2804 multiple video decoder. | |
344 | ||
345 | To compile this driver as a module, choose M here: the | |
346 | module will be called tw2804. | |
347 | ||
0890ec19 HV |
348 | config VIDEO_TW9903 |
349 | tristate "Techwell TW9903 video decoder" | |
350 | depends on VIDEO_V4L2 && I2C | |
351 | ---help--- | |
12be52a9 | 352 | Support for the Techwell tw9903 multi-standard video decoder |
0890ec19 HV |
353 | with high quality down scaler. |
354 | ||
355 | To compile this driver as a module, choose M here: the | |
356 | module will be called tw9903. | |
357 | ||
a000e9a0 HV |
358 | config VIDEO_TW9906 |
359 | tristate "Techwell TW9906 video decoder" | |
360 | depends on VIDEO_V4L2 && I2C | |
361 | ---help--- | |
362 | Support for the Techwell tw9906 enhanced multi-standard comb filter | |
363 | video decoder with YCbCr input support. | |
364 | ||
365 | To compile this driver as a module, choose M here: the | |
366 | module will be called tw9906. | |
367 | ||
cb7a01ac MCC |
368 | config VIDEO_VPX3220 |
369 | tristate "vpx3220a, vpx3216b & vpx3214c video decoders" | |
370 | depends on VIDEO_V4L2 && I2C | |
371 | ---help--- | |
372 | Support for VPX322x video decoders. | |
373 | ||
374 | To compile this driver as a module, choose M here: the | |
375 | module will be called vpx3220. | |
376 | ||
377 | comment "Video and audio decoders" | |
378 | ||
379 | config VIDEO_SAA717X | |
380 | tristate "Philips SAA7171/3/4 audio/video decoders" | |
381 | depends on VIDEO_V4L2 && I2C | |
382 | ---help--- | |
383 | Support for the Philips SAA7171/3/4 audio/video decoders. | |
384 | ||
385 | To compile this driver as a module, choose M here: the | |
386 | module will be called saa717x. | |
387 | ||
388 | source "drivers/media/i2c/cx25840/Kconfig" | |
389 | ||
cb7a01ac MCC |
390 | comment "Video encoders" |
391 | ||
392 | config VIDEO_SAA7127 | |
393 | tristate "Philips SAA7127/9 digital video encoders" | |
394 | depends on VIDEO_V4L2 && I2C | |
395 | ---help--- | |
396 | Support for the Philips SAA7127/9 digital video encoders. | |
397 | ||
398 | To compile this driver as a module, choose M here: the | |
399 | module will be called saa7127. | |
400 | ||
401 | config VIDEO_SAA7185 | |
402 | tristate "Philips SAA7185 video encoder" | |
403 | depends on VIDEO_V4L2 && I2C | |
404 | ---help--- | |
405 | Support for the Philips SAA7185 video encoder. | |
406 | ||
407 | To compile this driver as a module, choose M here: the | |
408 | module will be called saa7185. | |
409 | ||
410 | config VIDEO_ADV7170 | |
411 | tristate "Analog Devices ADV7170 video encoder" | |
412 | depends on VIDEO_V4L2 && I2C | |
413 | ---help--- | |
414 | Support for the Analog Devices ADV7170 video encoder driver | |
415 | ||
416 | To compile this driver as a module, choose M here: the | |
417 | module will be called adv7170. | |
418 | ||
419 | config VIDEO_ADV7175 | |
420 | tristate "Analog Devices ADV7175 video encoder" | |
421 | depends on VIDEO_V4L2 && I2C | |
422 | ---help--- | |
423 | Support for the Analog Devices ADV7175 video encoder driver | |
424 | ||
425 | To compile this driver as a module, choose M here: the | |
426 | module will be called adv7175. | |
427 | ||
428 | config VIDEO_ADV7343 | |
429 | tristate "ADV7343 video encoder" | |
430 | depends on I2C | |
431 | help | |
432 | Support for Analog Devices I2C bus based ADV7343 encoder. | |
433 | ||
434 | To compile this driver as a module, choose M here: the | |
435 | module will be called adv7343. | |
436 | ||
437 | config VIDEO_ADV7393 | |
438 | tristate "ADV7393 video encoder" | |
439 | depends on I2C | |
440 | help | |
441 | Support for Analog Devices I2C bus based ADV7393 encoder. | |
442 | ||
443 | To compile this driver as a module, choose M here: the | |
444 | module will be called adv7393. | |
445 | ||
5a544cce HV |
446 | config VIDEO_ADV7511 |
447 | tristate "Analog Devices ADV7511 encoder" | |
584ca025 | 448 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
b4dbad8f | 449 | select HDMI |
5a544cce HV |
450 | ---help--- |
451 | Support for the Analog Devices ADV7511 video encoder. | |
452 | ||
453 | This is a Analog Devices HDMI transmitter. | |
454 | ||
455 | To compile this driver as a module, choose M here: the | |
456 | module will be called adv7511. | |
457 | ||
117a55b6 HV |
458 | config VIDEO_AD9389B |
459 | tristate "Analog Devices AD9389B encoder" | |
460 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
461 | ---help--- | |
462 | Support for the Analog Devices AD9389B video encoder. | |
463 | ||
464 | This is a Analog Devices HDMI transmitter. | |
465 | ||
466 | To compile this driver as a module, choose M here: the | |
467 | module will be called ad9389b. | |
468 | ||
cb7a01ac MCC |
469 | config VIDEO_AK881X |
470 | tristate "AK8813/AK8814 video encoders" | |
471 | depends on I2C | |
472 | help | |
473 | Video output driver for AKM AK8813 and AK8814 TV encoders | |
474 | ||
14735190 HV |
475 | config VIDEO_THS8200 |
476 | tristate "Texas Instruments THS8200 video encoder" | |
477 | depends on VIDEO_V4L2 && I2C | |
478 | ---help--- | |
479 | Support for the Texas Instruments THS8200 video encoder. | |
480 | ||
481 | To compile this driver as a module, choose M here: the | |
482 | module will be called ths8200. | |
483 | ||
cb7a01ac MCC |
484 | comment "Camera sensor devices" |
485 | ||
486 | config VIDEO_APTINA_PLL | |
487 | tristate | |
488 | ||
489 | config VIDEO_SMIAPP_PLL | |
490 | tristate | |
491 | ||
c4c0283a BP |
492 | config VIDEO_OV2659 |
493 | tristate "OmniVision OV2659 sensor support" | |
494 | depends on VIDEO_V4L2 && I2C | |
495 | depends on MEDIA_CAMERA_SUPPORT | |
496 | ---help--- | |
497 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
498 | OV2659 camera. | |
499 | ||
500 | To compile this driver as a module, choose M here: the | |
501 | module will be called ov2659. | |
502 | ||
ec367c3c HV |
503 | config VIDEO_OV7640 |
504 | tristate "OmniVision OV7640 sensor support" | |
505 | depends on I2C && VIDEO_V4L2 | |
506 | depends on MEDIA_CAMERA_SUPPORT | |
507 | ---help--- | |
508 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
509 | OV7640 camera. | |
510 | ||
511 | To compile this driver as a module, choose M here: the | |
512 | module will be called ov7640. | |
513 | ||
cb7a01ac MCC |
514 | config VIDEO_OV7670 |
515 | tristate "OmniVision OV7670 sensor support" | |
516 | depends on I2C && VIDEO_V4L2 | |
517 | depends on MEDIA_CAMERA_SUPPORT | |
518 | ---help--- | |
519 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
520 | OV7670 VGA camera. It currently only works with the M88ALP01 | |
521 | controller. | |
522 | ||
84a15ded SN |
523 | config VIDEO_OV9650 |
524 | tristate "OmniVision OV9650/OV9652 sensor support" | |
525 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
526 | ---help--- | |
527 | This is a V4L2 sensor-level driver for the Omnivision | |
528 | OV9650 and OV9652 camera sensors. | |
529 | ||
cb7a01ac MCC |
530 | config VIDEO_VS6624 |
531 | tristate "ST VS6624 sensor support" | |
532 | depends on VIDEO_V4L2 && I2C | |
533 | depends on MEDIA_CAMERA_SUPPORT | |
534 | ---help--- | |
535 | This is a Video4Linux2 sensor-level driver for the ST VS6624 | |
536 | camera. | |
537 | ||
538 | To compile this driver as a module, choose M here: the | |
539 | module will be called vs6624. | |
540 | ||
541 | config VIDEO_MT9M032 | |
542 | tristate "MT9M032 camera sensor support" | |
543 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
544 | depends on MEDIA_CAMERA_SUPPORT | |
545 | select VIDEO_APTINA_PLL | |
546 | ---help--- | |
547 | This driver supports MT9M032 camera sensors from Aptina, monochrome | |
548 | models only. | |
549 | ||
550 | config VIDEO_MT9P031 | |
551 | tristate "Aptina MT9P031 support" | |
552 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
553 | depends on MEDIA_CAMERA_SUPPORT | |
554 | select VIDEO_APTINA_PLL | |
555 | ---help--- | |
556 | This is a Video4Linux2 sensor-level driver for the Aptina | |
557 | (Micron) mt9p031 5 Mpixel camera. | |
558 | ||
559 | config VIDEO_MT9T001 | |
560 | tristate "Aptina MT9T001 support" | |
561 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
562 | depends on MEDIA_CAMERA_SUPPORT | |
563 | ---help--- | |
564 | This is a Video4Linux2 sensor-level driver for the Aptina | |
565 | (Micron) mt0t001 3 Mpixel camera. | |
566 | ||
567 | config VIDEO_MT9V011 | |
568 | tristate "Micron mt9v011 sensor support" | |
569 | depends on I2C && VIDEO_V4L2 | |
570 | depends on MEDIA_CAMERA_SUPPORT | |
571 | ---help--- | |
572 | This is a Video4Linux2 sensor-level driver for the Micron | |
573 | mt0v011 1.3 Mpixel camera. It currently only works with the | |
574 | em28xx driver. | |
575 | ||
576 | config VIDEO_MT9V032 | |
577 | tristate "Micron MT9V032 sensor support" | |
578 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
579 | depends on MEDIA_CAMERA_SUPPORT | |
80b44ef2 | 580 | select REGMAP_I2C |
cb7a01ac MCC |
581 | ---help--- |
582 | This is a Video4Linux2 sensor-level driver for the Micron | |
583 | MT9V032 752x480 CMOS sensor. | |
584 | ||
cb7a01ac MCC |
585 | config VIDEO_SR030PC30 |
586 | tristate "Siliconfile SR030PC30 sensor support" | |
587 | depends on I2C && VIDEO_V4L2 | |
588 | depends on MEDIA_CAMERA_SUPPORT | |
589 | ---help--- | |
590 | This driver supports SR030PC30 VGA camera from Siliconfile | |
591 | ||
592 | config VIDEO_NOON010PC30 | |
593 | tristate "Siliconfile NOON010PC30 sensor support" | |
2cca7d4e | 594 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
cb7a01ac MCC |
595 | depends on MEDIA_CAMERA_SUPPORT |
596 | ---help--- | |
597 | This driver supports NOON010PC30 CIF camera from Siliconfile | |
598 | ||
599 | source "drivers/media/i2c/m5mols/Kconfig" | |
600 | ||
601 | config VIDEO_S5K6AA | |
602 | tristate "Samsung S5K6AAFX sensor support" | |
603 | depends on MEDIA_CAMERA_SUPPORT | |
604 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
605 | ---help--- | |
606 | This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M | |
607 | camera sensor with an embedded SoC image signal processor. | |
608 | ||
814b4dd9 SN |
609 | config VIDEO_S5K6A3 |
610 | tristate "Samsung S5K6A3 sensor support" | |
611 | depends on MEDIA_CAMERA_SUPPORT | |
612 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
613 | ---help--- | |
614 | This is a V4L2 sensor-level driver for Samsung S5K6A3 raw | |
615 | camera sensor. | |
616 | ||
8b99312b SL |
617 | config VIDEO_S5K4ECGX |
618 | tristate "Samsung S5K4ECGX sensor support" | |
619 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
620 | ---help--- | |
621 | This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M | |
622 | camera sensor with an embedded SoC image signal processor. | |
623 | ||
7d459937 AH |
624 | config VIDEO_S5K5BAF |
625 | tristate "Samsung S5K5BAF sensor support" | |
626 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
627 | ---help--- | |
628 | This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M | |
629 | camera sensor with an embedded SoC image signal processor. | |
630 | ||
cb7a01ac MCC |
631 | source "drivers/media/i2c/smiapp/Kconfig" |
632 | ||
cac47f18 AH |
633 | config VIDEO_S5C73M3 |
634 | tristate "Samsung S5C73M3 sensor support" | |
635 | depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
636 | ---help--- | |
4494f0fd GG |
637 | This is a V4L2 sensor-level driver for Samsung S5C73M3 |
638 | 8 Mpixel camera. | |
cac47f18 | 639 | |
cb7a01ac MCC |
640 | comment "Flash devices" |
641 | ||
642 | config VIDEO_ADP1653 | |
643 | tristate "ADP1653 flash support" | |
644 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
645 | depends on MEDIA_CAMERA_SUPPORT | |
646 | ---help--- | |
647 | This is a driver for the ADP1653 flash controller. It is used for | |
648 | example in Nokia N900. | |
649 | ||
650 | config VIDEO_AS3645A | |
651 | tristate "AS3645A flash driver support" | |
652 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
653 | depends on MEDIA_CAMERA_SUPPORT | |
654 | ---help--- | |
655 | This is a driver for the AS3645A and LM3555 flash controllers. It has | |
656 | build in control for flash, torch and indicator LEDs. | |
657 | ||
7f6b11a1 DJ |
658 | config VIDEO_LM3560 |
659 | tristate "LM3560 dual flash driver support" | |
660 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
661 | depends on MEDIA_CAMERA_SUPPORT | |
662 | select REGMAP_I2C | |
663 | ---help--- | |
664 | This is a driver for the lm3560 dual flash controllers. It controls | |
665 | flash, torch LEDs. | |
666 | ||
dc76df5d DJ |
667 | config VIDEO_LM3646 |
668 | tristate "LM3646 dual flash driver support" | |
669 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
670 | depends on MEDIA_CAMERA_SUPPORT | |
671 | select REGMAP_I2C | |
672 | ---help--- | |
673 | This is a driver for the lm3646 dual flash controllers. It controls | |
674 | flash, torch LEDs. | |
675 | ||
cb7a01ac MCC |
676 | comment "Video improvement chips" |
677 | ||
678 | config VIDEO_UPD64031A | |
679 | tristate "NEC Electronics uPD64031A Ghost Reduction" | |
680 | depends on VIDEO_V4L2 && I2C | |
681 | ---help--- | |
682 | Support for the NEC Electronics uPD64031A Ghost Reduction | |
683 | video chip. It is most often found in NTSC TV cards made for | |
684 | Japan and is used to reduce the 'ghosting' effect that can | |
685 | be present in analog TV broadcasts. | |
686 | ||
687 | To compile this driver as a module, choose M here: the | |
688 | module will be called upd64031a. | |
689 | ||
690 | config VIDEO_UPD64083 | |
691 | tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" | |
692 | depends on VIDEO_V4L2 && I2C | |
693 | ---help--- | |
694 | Support for the NEC Electronics uPD64083 3-Dimensional Y/C | |
695 | separation video chip. It is used to improve the quality of | |
696 | the colors of a composite signal. | |
697 | ||
698 | To compile this driver as a module, choose M here: the | |
699 | module will be called upd64083. | |
700 | ||
6052ba35 HV |
701 | comment "Audio/Video compression chips" |
702 | ||
703 | config VIDEO_SAA6752HS | |
704 | tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" | |
705 | depends on VIDEO_V4L2 && I2C | |
d984d325 | 706 | select CRC32 |
6052ba35 HV |
707 | ---help--- |
708 | Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 | |
709 | audio encoder with multiplexer. | |
710 | ||
711 | To compile this driver as a module, choose M here: the | |
712 | module will be called saa6752hs. | |
713 | ||
8c88126b | 714 | comment "Miscellaneous helper chips" |
cb7a01ac MCC |
715 | |
716 | config VIDEO_THS7303 | |
88da0183 LP |
717 | tristate "THS7303/53 Video Amplifier" |
718 | depends on VIDEO_V4L2 && I2C | |
cb7a01ac | 719 | help |
88da0183 | 720 | Support for TI THS7303/53 video amplifier |
cb7a01ac MCC |
721 | |
722 | To compile this driver as a module, choose M here: the | |
723 | module will be called ths7303. | |
724 | ||
725 | config VIDEO_M52790 | |
726 | tristate "Mitsubishi M52790 A/V switch" | |
727 | depends on VIDEO_V4L2 && I2C | |
728 | ---help--- | |
729 | Support for the Mitsubishi M52790 A/V switch. | |
730 | ||
731 | To compile this driver as a module, choose M here: the | |
732 | module will be called m52790. | |
fccea74f | 733 | endmenu |
e9d2f057 | 734 | |
fccea74f | 735 | menu "Sensors used on soc_camera driver" |
cb7a01ac | 736 | |
2a2d1cf4 MCC |
737 | if SOC_CAMERA |
738 | source "drivers/media/i2c/soc_camera/Kconfig" | |
739 | endif | |
740 | ||
cb7a01ac | 741 | endmenu |
fccea74f | 742 | |
cb7a01ac | 743 | endif |