]>
Commit | Line | Data |
---|---|---|
117a55b6 HV |
1 | /* |
2 | * Analog Devices AD9389B/AD9889B video encoder driver | |
3 | * | |
4 | * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. | |
5 | * | |
6 | * This program is free software; you may redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; version 2 of the License. | |
9 | * | |
10 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
11 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | |
12 | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
13 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | |
14 | * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | |
15 | * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
16 | * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | |
17 | * SOFTWARE. | |
18 | */ | |
19 | ||
20 | /* | |
21 | * References (c = chapter, p = page): | |
22 | * REF_01 - Analog Devices, Programming Guide, AD9889B/AD9389B, | |
23 | * HDMI Transitter, Rev. A, October 2010 | |
24 | */ | |
25 | ||
26 | #include <linux/kernel.h> | |
27 | #include <linux/module.h> | |
28 | #include <linux/slab.h> | |
29 | #include <linux/i2c.h> | |
30 | #include <linux/delay.h> | |
31 | #include <linux/videodev2.h> | |
32 | #include <linux/workqueue.h> | |
33 | #include <linux/v4l2-dv-timings.h> | |
34 | #include <media/v4l2-device.h> | |
117a55b6 | 35 | #include <media/v4l2-common.h> |
25764158 | 36 | #include <media/v4l2-dv-timings.h> |
117a55b6 | 37 | #include <media/v4l2-ctrls.h> |
b5dcee22 | 38 | #include <media/i2c/ad9389b.h> |
117a55b6 HV |
39 | |
40 | static int debug; | |
41 | module_param(debug, int, 0644); | |
42 | MODULE_PARM_DESC(debug, "debug level (0-2)"); | |
43 | ||
44 | MODULE_DESCRIPTION("Analog Devices AD9389B/AD9889B video encoder driver"); | |
45 | MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>"); | |
46 | MODULE_AUTHOR("Martin Bugge <marbugge@cisco.com>"); | |
47 | MODULE_LICENSE("GPL"); | |
48 | ||
49 | #define MASK_AD9389B_EDID_RDY_INT 0x04 | |
50 | #define MASK_AD9389B_MSEN_INT 0x40 | |
51 | #define MASK_AD9389B_HPD_INT 0x80 | |
52 | ||
53 | #define MASK_AD9389B_HPD_DETECT 0x40 | |
54 | #define MASK_AD9389B_MSEN_DETECT 0x20 | |
55 | #define MASK_AD9389B_EDID_RDY 0x10 | |
56 | ||
57 | #define EDID_MAX_RETRIES (8) | |
58 | #define EDID_DELAY 250 | |
59 | #define EDID_MAX_SEGM 8 | |
60 | ||
61 | /* | |
62 | ********************************************************************** | |
63 | * | |
64 | * Arrays with configuration parameters for the AD9389B | |
65 | * | |
66 | ********************************************************************** | |
67 | */ | |
68 | ||
117a55b6 HV |
69 | struct ad9389b_state_edid { |
70 | /* total number of blocks */ | |
71 | u32 blocks; | |
72 | /* Number of segments read */ | |
73 | u32 segments; | |
74 | u8 data[EDID_MAX_SEGM * 256]; | |
75 | /* Number of EDID read retries left */ | |
76 | unsigned read_retries; | |
77 | }; | |
78 | ||
79 | struct ad9389b_state { | |
80 | struct ad9389b_platform_data pdata; | |
81 | struct v4l2_subdev sd; | |
82 | struct media_pad pad; | |
83 | struct v4l2_ctrl_handler hdl; | |
84 | int chip_revision; | |
85 | /* Is the ad9389b powered on? */ | |
86 | bool power_on; | |
87 | /* Did we receive hotplug and rx-sense signals? */ | |
88 | bool have_monitor; | |
89 | /* timings from s_dv_timings */ | |
90 | struct v4l2_dv_timings dv_timings; | |
91 | /* controls */ | |
92 | struct v4l2_ctrl *hdmi_mode_ctrl; | |
93 | struct v4l2_ctrl *hotplug_ctrl; | |
94 | struct v4l2_ctrl *rx_sense_ctrl; | |
95 | struct v4l2_ctrl *have_edid0_ctrl; | |
96 | struct v4l2_ctrl *rgb_quantization_range_ctrl; | |
97 | struct i2c_client *edid_i2c_client; | |
98 | struct ad9389b_state_edid edid; | |
99 | /* Running counter of the number of detected EDIDs (for debugging) */ | |
100 | unsigned edid_detect_counter; | |
117a55b6 HV |
101 | struct delayed_work edid_handler; /* work entry */ |
102 | }; | |
103 | ||
104 | static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd); | |
105 | static bool ad9389b_check_edid_status(struct v4l2_subdev *sd); | |
106 | static void ad9389b_setup(struct v4l2_subdev *sd); | |
107 | static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq); | |
108 | static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq); | |
109 | ||
110 | static inline struct ad9389b_state *get_ad9389b_state(struct v4l2_subdev *sd) | |
111 | { | |
112 | return container_of(sd, struct ad9389b_state, sd); | |
113 | } | |
114 | ||
115 | static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) | |
116 | { | |
117 | return &container_of(ctrl->handler, struct ad9389b_state, hdl)->sd; | |
118 | } | |
119 | ||
120 | /* ------------------------ I2C ----------------------------------------------- */ | |
121 | ||
122 | static int ad9389b_rd(struct v4l2_subdev *sd, u8 reg) | |
123 | { | |
124 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
125 | ||
126 | return i2c_smbus_read_byte_data(client, reg); | |
127 | } | |
128 | ||
129 | static int ad9389b_wr(struct v4l2_subdev *sd, u8 reg, u8 val) | |
130 | { | |
131 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
132 | int ret; | |
133 | int i; | |
134 | ||
135 | for (i = 0; i < 3; i++) { | |
136 | ret = i2c_smbus_write_byte_data(client, reg, val); | |
137 | if (ret == 0) | |
138 | return 0; | |
139 | } | |
51af70bf | 140 | v4l2_err(sd, "%s: failed reg 0x%x, val 0x%x\n", __func__, reg, val); |
117a55b6 HV |
141 | return ret; |
142 | } | |
143 | ||
144 | /* To set specific bits in the register, a clear-mask is given (to be AND-ed), | |
145 | and then the value-mask (to be OR-ed). */ | |
146 | static inline void ad9389b_wr_and_or(struct v4l2_subdev *sd, u8 reg, | |
d3ec7de4 | 147 | u8 clr_mask, u8 val_mask) |
117a55b6 HV |
148 | { |
149 | ad9389b_wr(sd, reg, (ad9389b_rd(sd, reg) & clr_mask) | val_mask); | |
150 | } | |
151 | ||
152 | static void ad9389b_edid_rd(struct v4l2_subdev *sd, u16 len, u8 *buf) | |
153 | { | |
154 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
155 | int i; | |
156 | ||
157 | v4l2_dbg(1, debug, sd, "%s:\n", __func__); | |
158 | ||
159 | for (i = 0; i < len; i++) | |
160 | buf[i] = i2c_smbus_read_byte_data(state->edid_i2c_client, i); | |
161 | } | |
162 | ||
163 | static inline bool ad9389b_have_hotplug(struct v4l2_subdev *sd) | |
164 | { | |
165 | return ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT; | |
166 | } | |
167 | ||
168 | static inline bool ad9389b_have_rx_sense(struct v4l2_subdev *sd) | |
169 | { | |
170 | return ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT; | |
171 | } | |
172 | ||
173 | static void ad9389b_csc_conversion_mode(struct v4l2_subdev *sd, u8 mode) | |
174 | { | |
175 | ad9389b_wr_and_or(sd, 0x17, 0xe7, (mode & 0x3)<<3); | |
176 | ad9389b_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5); | |
177 | } | |
178 | ||
179 | static void ad9389b_csc_coeff(struct v4l2_subdev *sd, | |
180 | u16 A1, u16 A2, u16 A3, u16 A4, | |
181 | u16 B1, u16 B2, u16 B3, u16 B4, | |
182 | u16 C1, u16 C2, u16 C3, u16 C4) | |
183 | { | |
184 | /* A */ | |
185 | ad9389b_wr_and_or(sd, 0x18, 0xe0, A1>>8); | |
186 | ad9389b_wr(sd, 0x19, A1); | |
187 | ad9389b_wr_and_or(sd, 0x1A, 0xe0, A2>>8); | |
188 | ad9389b_wr(sd, 0x1B, A2); | |
189 | ad9389b_wr_and_or(sd, 0x1c, 0xe0, A3>>8); | |
190 | ad9389b_wr(sd, 0x1d, A3); | |
191 | ad9389b_wr_and_or(sd, 0x1e, 0xe0, A4>>8); | |
192 | ad9389b_wr(sd, 0x1f, A4); | |
193 | ||
194 | /* B */ | |
195 | ad9389b_wr_and_or(sd, 0x20, 0xe0, B1>>8); | |
196 | ad9389b_wr(sd, 0x21, B1); | |
197 | ad9389b_wr_and_or(sd, 0x22, 0xe0, B2>>8); | |
198 | ad9389b_wr(sd, 0x23, B2); | |
199 | ad9389b_wr_and_or(sd, 0x24, 0xe0, B3>>8); | |
200 | ad9389b_wr(sd, 0x25, B3); | |
201 | ad9389b_wr_and_or(sd, 0x26, 0xe0, B4>>8); | |
202 | ad9389b_wr(sd, 0x27, B4); | |
203 | ||
204 | /* C */ | |
205 | ad9389b_wr_and_or(sd, 0x28, 0xe0, C1>>8); | |
206 | ad9389b_wr(sd, 0x29, C1); | |
207 | ad9389b_wr_and_or(sd, 0x2A, 0xe0, C2>>8); | |
208 | ad9389b_wr(sd, 0x2B, C2); | |
209 | ad9389b_wr_and_or(sd, 0x2C, 0xe0, C3>>8); | |
210 | ad9389b_wr(sd, 0x2D, C3); | |
211 | ad9389b_wr_and_or(sd, 0x2E, 0xe0, C4>>8); | |
212 | ad9389b_wr(sd, 0x2F, C4); | |
213 | } | |
214 | ||
215 | static void ad9389b_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable) | |
216 | { | |
217 | if (enable) { | |
218 | u8 csc_mode = 0; | |
219 | ||
220 | ad9389b_csc_conversion_mode(sd, csc_mode); | |
221 | ad9389b_csc_coeff(sd, | |
222 | 4096-564, 0, 0, 256, | |
223 | 0, 4096-564, 0, 256, | |
224 | 0, 0, 4096-564, 256); | |
225 | /* enable CSC */ | |
226 | ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x1); | |
227 | /* AVI infoframe: Limited range RGB (16-235) */ | |
228 | ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x02); | |
229 | } else { | |
230 | /* disable CSC */ | |
231 | ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x0); | |
232 | /* AVI infoframe: Full range RGB (0-255) */ | |
233 | ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x04); | |
234 | } | |
235 | } | |
236 | ||
237 | static void ad9389b_set_IT_content_AVI_InfoFrame(struct v4l2_subdev *sd) | |
238 | { | |
239 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
240 | ||
680fee04 HV |
241 | if (state->dv_timings.bt.flags & V4L2_DV_FL_IS_CE_VIDEO) { |
242 | /* CE format, not IT */ | |
117a55b6 HV |
243 | ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x00); |
244 | } else { | |
245 | /* IT format */ | |
246 | ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x40); | |
247 | } | |
248 | } | |
249 | ||
250 | static int ad9389b_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl) | |
251 | { | |
252 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
253 | ||
254 | switch (ctrl->val) { | |
255 | case V4L2_DV_RGB_RANGE_AUTO: | |
256 | /* automatic */ | |
680fee04 HV |
257 | if (state->dv_timings.bt.flags & V4L2_DV_FL_IS_CE_VIDEO) { |
258 | /* CE format, RGB limited range (16-235) */ | |
117a55b6 HV |
259 | ad9389b_csc_rgb_full2limit(sd, true); |
260 | } else { | |
680fee04 | 261 | /* not CE format, RGB full range (0-255) */ |
117a55b6 HV |
262 | ad9389b_csc_rgb_full2limit(sd, false); |
263 | } | |
264 | break; | |
265 | case V4L2_DV_RGB_RANGE_LIMITED: | |
266 | /* RGB limited range (16-235) */ | |
267 | ad9389b_csc_rgb_full2limit(sd, true); | |
268 | break; | |
269 | case V4L2_DV_RGB_RANGE_FULL: | |
270 | /* RGB full range (0-255) */ | |
271 | ad9389b_csc_rgb_full2limit(sd, false); | |
272 | break; | |
273 | default: | |
274 | return -EINVAL; | |
275 | } | |
276 | return 0; | |
277 | } | |
278 | ||
279 | static void ad9389b_set_manual_pll_gear(struct v4l2_subdev *sd, u32 pixelclock) | |
280 | { | |
281 | u8 gear; | |
282 | ||
283 | /* Workaround for TMDS PLL problem | |
284 | * The TMDS PLL in AD9389b change gear when the chip is heated above a | |
285 | * certain temperature. The output is disabled when the PLL change gear | |
286 | * so the monitor has to lock on the signal again. A workaround for | |
287 | * this is to use the manual PLL gears. This is a solution from Analog | |
288 | * Devices that is not documented in the datasheets. | |
289 | * 0x98 [7] = enable manual gearing. 0x98 [6:4] = gear | |
290 | * | |
291 | * The pixel frequency ranges are based on readout of the gear the | |
292 | * automatic gearing selects for different pixel clocks | |
293 | * (read from 0x9e [3:1]). | |
294 | */ | |
295 | ||
296 | if (pixelclock > 140000000) | |
297 | gear = 0xc0; /* 4th gear */ | |
298 | else if (pixelclock > 117000000) | |
299 | gear = 0xb0; /* 3rd gear */ | |
300 | else if (pixelclock > 87000000) | |
301 | gear = 0xa0; /* 2nd gear */ | |
302 | else if (pixelclock > 60000000) | |
303 | gear = 0x90; /* 1st gear */ | |
304 | else | |
305 | gear = 0x80; /* 0th gear */ | |
306 | ||
307 | ad9389b_wr_and_or(sd, 0x98, 0x0f, gear); | |
308 | } | |
309 | ||
310 | /* ------------------------------ CTRL OPS ------------------------------ */ | |
311 | ||
312 | static int ad9389b_s_ctrl(struct v4l2_ctrl *ctrl) | |
313 | { | |
314 | struct v4l2_subdev *sd = to_sd(ctrl); | |
315 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
316 | ||
317 | v4l2_dbg(1, debug, sd, | |
d3ec7de4 | 318 | "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val); |
117a55b6 HV |
319 | |
320 | if (state->hdmi_mode_ctrl == ctrl) { | |
321 | /* Set HDMI or DVI-D */ | |
322 | ad9389b_wr_and_or(sd, 0xaf, 0xfd, | |
d3ec7de4 | 323 | ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00); |
117a55b6 HV |
324 | return 0; |
325 | } | |
326 | if (state->rgb_quantization_range_ctrl == ctrl) | |
327 | return ad9389b_set_rgb_quantization_mode(sd, ctrl); | |
328 | return -EINVAL; | |
329 | } | |
330 | ||
331 | static const struct v4l2_ctrl_ops ad9389b_ctrl_ops = { | |
332 | .s_ctrl = ad9389b_s_ctrl, | |
333 | }; | |
334 | ||
335 | /* ---------------------------- CORE OPS ------------------------------------------- */ | |
336 | ||
337 | #ifdef CONFIG_VIDEO_ADV_DEBUG | |
338 | static int ad9389b_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) | |
339 | { | |
117a55b6 HV |
340 | reg->val = ad9389b_rd(sd, reg->reg & 0xff); |
341 | reg->size = 1; | |
342 | return 0; | |
343 | } | |
344 | ||
977ba3b1 | 345 | static int ad9389b_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) |
117a55b6 | 346 | { |
117a55b6 HV |
347 | ad9389b_wr(sd, reg->reg & 0xff, reg->val & 0xff); |
348 | return 0; | |
349 | } | |
350 | #endif | |
351 | ||
117a55b6 HV |
352 | static int ad9389b_log_status(struct v4l2_subdev *sd) |
353 | { | |
354 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
355 | struct ad9389b_state_edid *edid = &state->edid; | |
356 | ||
357 | static const char * const states[] = { | |
358 | "in reset", | |
359 | "reading EDID", | |
360 | "idle", | |
361 | "initializing HDCP", | |
362 | "HDCP enabled", | |
363 | "initializing HDCP repeater", | |
364 | "6", "7", "8", "9", "A", "B", "C", "D", "E", "F" | |
365 | }; | |
366 | static const char * const errors[] = { | |
367 | "no error", | |
368 | "bad receiver BKSV", | |
369 | "Ri mismatch", | |
370 | "Pj mismatch", | |
371 | "i2c error", | |
372 | "timed out", | |
373 | "max repeater cascade exceeded", | |
374 | "hash check failed", | |
375 | "too many devices", | |
376 | "9", "A", "B", "C", "D", "E", "F" | |
377 | }; | |
378 | ||
379 | u8 manual_gear; | |
380 | ||
381 | v4l2_info(sd, "chip revision %d\n", state->chip_revision); | |
382 | v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off"); | |
383 | v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n", | |
d3ec7de4 MB |
384 | (ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT) ? |
385 | "detected" : "no", | |
386 | (ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT) ? | |
387 | "detected" : "no", | |
388 | edid->segments ? "found" : "no", edid->blocks); | |
51af70bf MB |
389 | v4l2_info(sd, "%s output %s\n", |
390 | (ad9389b_rd(sd, 0xaf) & 0x02) ? | |
391 | "HDMI" : "DVI-D", | |
392 | (ad9389b_rd(sd, 0xa1) & 0x3c) ? | |
393 | "disabled" : "enabled"); | |
117a55b6 | 394 | v4l2_info(sd, "ad9389b: %s\n", (ad9389b_rd(sd, 0xb8) & 0x40) ? |
d3ec7de4 | 395 | "encrypted" : "no encryption"); |
117a55b6 | 396 | v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n", |
d3ec7de4 MB |
397 | states[ad9389b_rd(sd, 0xc8) & 0xf], |
398 | errors[ad9389b_rd(sd, 0xc8) >> 4], | |
399 | state->edid_detect_counter, | |
400 | ad9389b_rd(sd, 0x94), ad9389b_rd(sd, 0x96)); | |
117a55b6 HV |
401 | manual_gear = ad9389b_rd(sd, 0x98) & 0x80; |
402 | v4l2_info(sd, "ad9389b: RGB quantization: %s range\n", | |
d3ec7de4 | 403 | ad9389b_rd(sd, 0x3b) & 0x01 ? "limited" : "full"); |
117a55b6 HV |
404 | v4l2_info(sd, "ad9389b: %s gear %d\n", |
405 | manual_gear ? "manual" : "automatic", | |
406 | manual_gear ? ((ad9389b_rd(sd, 0x98) & 0x70) >> 4) : | |
d3ec7de4 | 407 | ((ad9389b_rd(sd, 0x9e) & 0x0e) >> 1)); |
51af70bf MB |
408 | if (ad9389b_rd(sd, 0xaf) & 0x02) { |
409 | /* HDMI only */ | |
410 | u8 manual_cts = ad9389b_rd(sd, 0x0a) & 0x80; | |
411 | u32 N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 | | |
412 | ad9389b_rd(sd, 0x02) << 8 | | |
413 | ad9389b_rd(sd, 0x03); | |
414 | u8 vic_detect = ad9389b_rd(sd, 0x3e) >> 2; | |
415 | u8 vic_sent = ad9389b_rd(sd, 0x3d) & 0x3f; | |
416 | u32 CTS; | |
417 | ||
418 | if (manual_cts) | |
419 | CTS = (ad9389b_rd(sd, 0x07) & 0xf) << 16 | | |
420 | ad9389b_rd(sd, 0x08) << 8 | | |
421 | ad9389b_rd(sd, 0x09); | |
422 | else | |
423 | CTS = (ad9389b_rd(sd, 0x04) & 0xf) << 16 | | |
424 | ad9389b_rd(sd, 0x05) << 8 | | |
425 | ad9389b_rd(sd, 0x06); | |
426 | N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 | | |
427 | ad9389b_rd(sd, 0x02) << 8 | | |
428 | ad9389b_rd(sd, 0x03); | |
429 | ||
430 | v4l2_info(sd, "ad9389b: CTS %s mode: N %d, CTS %d\n", | |
431 | manual_cts ? "manual" : "automatic", N, CTS); | |
432 | ||
433 | v4l2_info(sd, "ad9389b: VIC: detected %d, sent %d\n", | |
434 | vic_detect, vic_sent); | |
117a55b6 | 435 | } |
11d034c8 HV |
436 | if (state->dv_timings.type == V4L2_DV_BT_656_1120) |
437 | v4l2_print_dv_timings(sd->name, "timings: ", | |
438 | &state->dv_timings, false); | |
439 | else | |
117a55b6 | 440 | v4l2_info(sd, "no timings set\n"); |
117a55b6 HV |
441 | return 0; |
442 | } | |
443 | ||
444 | /* Power up/down ad9389b */ | |
445 | static int ad9389b_s_power(struct v4l2_subdev *sd, int on) | |
446 | { | |
447 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
448 | struct ad9389b_platform_data *pdata = &state->pdata; | |
449 | const int retries = 20; | |
450 | int i; | |
451 | ||
452 | v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off"); | |
453 | ||
454 | state->power_on = on; | |
455 | ||
456 | if (!on) { | |
457 | /* Power down */ | |
458 | ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40); | |
459 | return true; | |
460 | } | |
461 | ||
462 | /* Power up */ | |
463 | /* The ad9389b does not always come up immediately. | |
464 | Retry multiple times. */ | |
465 | for (i = 0; i < retries; i++) { | |
466 | ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x0); | |
467 | if ((ad9389b_rd(sd, 0x41) & 0x40) == 0) | |
468 | break; | |
469 | ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40); | |
470 | msleep(10); | |
471 | } | |
472 | if (i == retries) { | |
473 | v4l2_dbg(1, debug, sd, "failed to powerup the ad9389b\n"); | |
474 | ad9389b_s_power(sd, 0); | |
475 | return false; | |
476 | } | |
477 | if (i > 1) | |
478 | v4l2_dbg(1, debug, sd, | |
d3ec7de4 | 479 | "needed %d retries to powerup the ad9389b\n", i); |
117a55b6 HV |
480 | |
481 | /* Select chip: AD9389B */ | |
482 | ad9389b_wr_and_or(sd, 0xba, 0xef, 0x10); | |
483 | ||
484 | /* Reserved registers that must be set according to REF_01 p. 11*/ | |
485 | ad9389b_wr_and_or(sd, 0x98, 0xf0, 0x07); | |
486 | ad9389b_wr(sd, 0x9c, 0x38); | |
487 | ad9389b_wr_and_or(sd, 0x9d, 0xfc, 0x01); | |
488 | ||
489 | /* Differential output drive strength */ | |
490 | if (pdata->diff_data_drive_strength > 0) | |
491 | ad9389b_wr(sd, 0xa2, pdata->diff_data_drive_strength); | |
492 | else | |
493 | ad9389b_wr(sd, 0xa2, 0x87); | |
494 | ||
495 | if (pdata->diff_clk_drive_strength > 0) | |
496 | ad9389b_wr(sd, 0xa3, pdata->diff_clk_drive_strength); | |
497 | else | |
498 | ad9389b_wr(sd, 0xa3, 0x87); | |
499 | ||
500 | ad9389b_wr(sd, 0x0a, 0x01); | |
501 | ad9389b_wr(sd, 0xbb, 0xff); | |
502 | ||
503 | /* Set number of attempts to read the EDID */ | |
504 | ad9389b_wr(sd, 0xc9, 0xf); | |
505 | return true; | |
506 | } | |
507 | ||
508 | /* Enable interrupts */ | |
509 | static void ad9389b_set_isr(struct v4l2_subdev *sd, bool enable) | |
510 | { | |
511 | u8 irqs = MASK_AD9389B_HPD_INT | MASK_AD9389B_MSEN_INT; | |
512 | u8 irqs_rd; | |
513 | int retries = 100; | |
514 | ||
515 | /* The datasheet says that the EDID ready interrupt should be | |
516 | disabled if there is no hotplug. */ | |
517 | if (!enable) | |
518 | irqs = 0; | |
519 | else if (ad9389b_have_hotplug(sd)) | |
520 | irqs |= MASK_AD9389B_EDID_RDY_INT; | |
521 | ||
522 | /* | |
523 | * This i2c write can fail (approx. 1 in 1000 writes). But it | |
524 | * is essential that this register is correct, so retry it | |
525 | * multiple times. | |
526 | * | |
527 | * Note that the i2c write does not report an error, but the readback | |
528 | * clearly shows the wrong value. | |
529 | */ | |
530 | do { | |
531 | ad9389b_wr(sd, 0x94, irqs); | |
532 | irqs_rd = ad9389b_rd(sd, 0x94); | |
533 | } while (retries-- && irqs_rd != irqs); | |
534 | ||
535 | if (irqs_rd != irqs) | |
536 | v4l2_err(sd, "Could not set interrupts: hw failure?\n"); | |
537 | } | |
538 | ||
539 | /* Interrupt handler */ | |
540 | static int ad9389b_isr(struct v4l2_subdev *sd, u32 status, bool *handled) | |
541 | { | |
542 | u8 irq_status; | |
543 | ||
544 | /* disable interrupts to prevent a race condition */ | |
545 | ad9389b_set_isr(sd, false); | |
546 | irq_status = ad9389b_rd(sd, 0x96); | |
547 | /* clear detected interrupts */ | |
548 | ad9389b_wr(sd, 0x96, irq_status); | |
51af70bf MB |
549 | /* enable interrupts */ |
550 | ad9389b_set_isr(sd, true); | |
117a55b6 | 551 | |
51af70bf MB |
552 | v4l2_dbg(1, debug, sd, "%s: irq_status 0x%x\n", __func__, irq_status); |
553 | ||
554 | if (irq_status & (MASK_AD9389B_HPD_INT)) | |
117a55b6 HV |
555 | ad9389b_check_monitor_present_status(sd); |
556 | if (irq_status & MASK_AD9389B_EDID_RDY_INT) | |
557 | ad9389b_check_edid_status(sd); | |
558 | ||
117a55b6 HV |
559 | *handled = true; |
560 | return 0; | |
561 | } | |
562 | ||
563 | static const struct v4l2_subdev_core_ops ad9389b_core_ops = { | |
564 | .log_status = ad9389b_log_status, | |
117a55b6 HV |
565 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
566 | .g_register = ad9389b_g_register, | |
567 | .s_register = ad9389b_s_register, | |
568 | #endif | |
569 | .s_power = ad9389b_s_power, | |
570 | .interrupt_service_routine = ad9389b_isr, | |
571 | }; | |
572 | ||
117a55b6 HV |
573 | /* ------------------------------ VIDEO OPS ------------------------------ */ |
574 | ||
575 | /* Enable/disable ad9389b output */ | |
576 | static int ad9389b_s_stream(struct v4l2_subdev *sd, int enable) | |
577 | { | |
117a55b6 HV |
578 | v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); |
579 | ||
580 | ad9389b_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c)); | |
581 | if (enable) { | |
582 | ad9389b_check_monitor_present_status(sd); | |
583 | } else { | |
584 | ad9389b_s_power(sd, 0); | |
117a55b6 HV |
585 | } |
586 | return 0; | |
587 | } | |
588 | ||
04164904 HV |
589 | static const struct v4l2_dv_timings_cap ad9389b_timings_cap = { |
590 | .type = V4L2_DV_BT_656_1120, | |
8f110d68 GG |
591 | /* keep this initialization for compatibility with GCC < 4.4.6 */ |
592 | .reserved = { 0 }, | |
593 | V4L2_INIT_BT_TIMINGS(0, 1920, 0, 1200, 25000000, 170000000, | |
594 | V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | | |
04164904 | 595 | V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT, |
8f110d68 GG |
596 | V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING | |
597 | V4L2_DV_BT_CAP_CUSTOM) | |
117a55b6 HV |
598 | }; |
599 | ||
600 | static int ad9389b_s_dv_timings(struct v4l2_subdev *sd, | |
601 | struct v4l2_dv_timings *timings) | |
602 | { | |
603 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
117a55b6 HV |
604 | |
605 | v4l2_dbg(1, debug, sd, "%s:\n", __func__); | |
606 | ||
607 | /* quick sanity check */ | |
b8f0fff4 | 608 | if (!v4l2_valid_dv_timings(timings, &ad9389b_timings_cap, NULL, NULL)) |
117a55b6 HV |
609 | return -EINVAL; |
610 | ||
611 | /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings | |
04164904 | 612 | if the format is one of the CEA or DMT timings. */ |
b8f0fff4 | 613 | v4l2_find_dv_timings_cap(timings, &ad9389b_timings_cap, 0, NULL, NULL); |
117a55b6 HV |
614 | |
615 | timings->bt.flags &= ~V4L2_DV_FL_REDUCED_FPS; | |
616 | ||
617 | /* save timings */ | |
618 | state->dv_timings = *timings; | |
619 | ||
620 | /* update quantization range based on new dv_timings */ | |
621 | ad9389b_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl); | |
622 | ||
623 | /* update PLL gear based on new dv_timings */ | |
624 | if (state->pdata.tmds_pll_gear == AD9389B_TMDS_PLL_GEAR_SEMI_AUTOMATIC) | |
625 | ad9389b_set_manual_pll_gear(sd, (u32)timings->bt.pixelclock); | |
626 | ||
627 | /* update AVI infoframe */ | |
628 | ad9389b_set_IT_content_AVI_InfoFrame(sd); | |
629 | ||
630 | return 0; | |
631 | } | |
632 | ||
633 | static int ad9389b_g_dv_timings(struct v4l2_subdev *sd, | |
634 | struct v4l2_dv_timings *timings) | |
635 | { | |
636 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
637 | ||
638 | v4l2_dbg(1, debug, sd, "%s:\n", __func__); | |
639 | ||
640 | if (!timings) | |
641 | return -EINVAL; | |
642 | ||
643 | *timings = state->dv_timings; | |
644 | ||
645 | return 0; | |
646 | } | |
647 | ||
648 | static int ad9389b_enum_dv_timings(struct v4l2_subdev *sd, | |
d3ec7de4 | 649 | struct v4l2_enum_dv_timings *timings) |
117a55b6 | 650 | { |
22c25b48 LP |
651 | if (timings->pad != 0) |
652 | return -EINVAL; | |
653 | ||
b8f0fff4 HV |
654 | return v4l2_enum_dv_timings_cap(timings, &ad9389b_timings_cap, |
655 | NULL, NULL); | |
117a55b6 HV |
656 | } |
657 | ||
658 | static int ad9389b_dv_timings_cap(struct v4l2_subdev *sd, | |
d3ec7de4 | 659 | struct v4l2_dv_timings_cap *cap) |
117a55b6 | 660 | { |
22c25b48 LP |
661 | if (cap->pad != 0) |
662 | return -EINVAL; | |
663 | ||
04164904 | 664 | *cap = ad9389b_timings_cap; |
117a55b6 HV |
665 | return 0; |
666 | } | |
667 | ||
668 | static const struct v4l2_subdev_video_ops ad9389b_video_ops = { | |
669 | .s_stream = ad9389b_s_stream, | |
670 | .s_dv_timings = ad9389b_s_dv_timings, | |
671 | .g_dv_timings = ad9389b_g_dv_timings, | |
117a55b6 HV |
672 | }; |
673 | ||
22c25b48 LP |
674 | /* ------------------------------ PAD OPS ------------------------------ */ |
675 | ||
676 | static int ad9389b_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid) | |
677 | { | |
678 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
679 | ||
680 | if (edid->pad != 0) | |
681 | return -EINVAL; | |
682 | if (edid->blocks == 0 || edid->blocks > 256) | |
683 | return -EINVAL; | |
22c25b48 LP |
684 | if (!state->edid.segments) { |
685 | v4l2_dbg(1, debug, sd, "EDID segment 0 not found\n"); | |
686 | return -ENODATA; | |
687 | } | |
688 | if (edid->start_block >= state->edid.segments * 2) | |
689 | return -E2BIG; | |
690 | if (edid->blocks + edid->start_block >= state->edid.segments * 2) | |
691 | edid->blocks = state->edid.segments * 2 - edid->start_block; | |
692 | memcpy(edid->edid, &state->edid.data[edid->start_block * 128], | |
693 | 128 * edid->blocks); | |
694 | return 0; | |
695 | } | |
696 | ||
697 | static const struct v4l2_subdev_pad_ops ad9389b_pad_ops = { | |
698 | .get_edid = ad9389b_get_edid, | |
699 | .enum_dv_timings = ad9389b_enum_dv_timings, | |
700 | .dv_timings_cap = ad9389b_dv_timings_cap, | |
701 | }; | |
702 | ||
703 | /* ------------------------------ AUDIO OPS ------------------------------ */ | |
704 | ||
117a55b6 HV |
705 | static int ad9389b_s_audio_stream(struct v4l2_subdev *sd, int enable) |
706 | { | |
707 | v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); | |
708 | ||
709 | if (enable) | |
710 | ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x80); | |
711 | else | |
712 | ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x40); | |
713 | ||
714 | return 0; | |
715 | } | |
716 | ||
717 | static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq) | |
718 | { | |
719 | u32 N; | |
720 | ||
721 | switch (freq) { | |
d3ec7de4 MB |
722 | case 32000: N = 4096; break; |
723 | case 44100: N = 6272; break; | |
724 | case 48000: N = 6144; break; | |
725 | case 88200: N = 12544; break; | |
726 | case 96000: N = 12288; break; | |
117a55b6 HV |
727 | case 176400: N = 25088; break; |
728 | case 192000: N = 24576; break; | |
729 | default: | |
d3ec7de4 | 730 | return -EINVAL; |
117a55b6 HV |
731 | } |
732 | ||
733 | /* Set N (used with CTS to regenerate the audio clock) */ | |
734 | ad9389b_wr(sd, 0x01, (N >> 16) & 0xf); | |
735 | ad9389b_wr(sd, 0x02, (N >> 8) & 0xff); | |
736 | ad9389b_wr(sd, 0x03, N & 0xff); | |
737 | ||
738 | return 0; | |
739 | } | |
740 | ||
741 | static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq) | |
742 | { | |
743 | u32 i2s_sf; | |
744 | ||
745 | switch (freq) { | |
d3ec7de4 MB |
746 | case 32000: i2s_sf = 0x30; break; |
747 | case 44100: i2s_sf = 0x00; break; | |
748 | case 48000: i2s_sf = 0x20; break; | |
749 | case 88200: i2s_sf = 0x80; break; | |
750 | case 96000: i2s_sf = 0xa0; break; | |
117a55b6 HV |
751 | case 176400: i2s_sf = 0xc0; break; |
752 | case 192000: i2s_sf = 0xe0; break; | |
753 | default: | |
d3ec7de4 | 754 | return -EINVAL; |
117a55b6 HV |
755 | } |
756 | ||
757 | /* Set sampling frequency for I2S audio to 48 kHz */ | |
758 | ad9389b_wr_and_or(sd, 0x15, 0xf, i2s_sf); | |
759 | ||
760 | return 0; | |
761 | } | |
762 | ||
763 | static int ad9389b_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) | |
764 | { | |
765 | /* TODO based on input/output/config */ | |
766 | /* TODO See datasheet "Programmers guide" p. 39-40 */ | |
767 | ||
768 | /* Only 2 channels in use for application */ | |
769 | ad9389b_wr_and_or(sd, 0x50, 0x1f, 0x20); | |
770 | /* Speaker mapping */ | |
771 | ad9389b_wr(sd, 0x51, 0x00); | |
772 | ||
773 | /* TODO Where should this be placed? */ | |
774 | /* 16 bit audio word length */ | |
775 | ad9389b_wr_and_or(sd, 0x14, 0xf0, 0x02); | |
776 | ||
777 | return 0; | |
778 | } | |
779 | ||
780 | static const struct v4l2_subdev_audio_ops ad9389b_audio_ops = { | |
781 | .s_stream = ad9389b_s_audio_stream, | |
782 | .s_clock_freq = ad9389b_s_clock_freq, | |
783 | .s_i2s_clock_freq = ad9389b_s_i2s_clock_freq, | |
784 | .s_routing = ad9389b_s_routing, | |
785 | }; | |
786 | ||
787 | /* --------------------- SUBDEV OPS --------------------------------------- */ | |
788 | ||
789 | static const struct v4l2_subdev_ops ad9389b_ops = { | |
790 | .core = &ad9389b_core_ops, | |
791 | .video = &ad9389b_video_ops, | |
792 | .audio = &ad9389b_audio_ops, | |
793 | .pad = &ad9389b_pad_ops, | |
794 | }; | |
795 | ||
796 | /* ----------------------------------------------------------------------- */ | |
797 | static void ad9389b_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, | |
d3ec7de4 | 798 | int segment, u8 *buf) |
117a55b6 HV |
799 | { |
800 | int i, j; | |
801 | ||
802 | if (debug < lvl) | |
803 | return; | |
804 | ||
805 | v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment); | |
806 | for (i = 0; i < 256; i += 16) { | |
807 | u8 b[128]; | |
808 | u8 *bp = b; | |
809 | ||
810 | if (i == 128) | |
811 | v4l2_dbg(lvl, debug, sd, "\n"); | |
812 | for (j = i; j < i + 16; j++) { | |
813 | sprintf(bp, "0x%02x, ", buf[j]); | |
814 | bp += 6; | |
815 | } | |
816 | bp[0] = '\0'; | |
817 | v4l2_dbg(lvl, debug, sd, "%s\n", b); | |
818 | } | |
819 | } | |
820 | ||
821 | static void ad9389b_edid_handler(struct work_struct *work) | |
822 | { | |
823 | struct delayed_work *dwork = to_delayed_work(work); | |
d3ec7de4 MB |
824 | struct ad9389b_state *state = |
825 | container_of(dwork, struct ad9389b_state, edid_handler); | |
117a55b6 HV |
826 | struct v4l2_subdev *sd = &state->sd; |
827 | struct ad9389b_edid_detect ed; | |
828 | ||
829 | v4l2_dbg(1, debug, sd, "%s:\n", __func__); | |
830 | ||
831 | if (ad9389b_check_edid_status(sd)) { | |
832 | /* Return if we received the EDID. */ | |
833 | return; | |
834 | } | |
835 | ||
836 | if (ad9389b_have_hotplug(sd)) { | |
837 | /* We must retry reading the EDID several times, it is possible | |
838 | * that initially the EDID couldn't be read due to i2c errors | |
839 | * (DVI connectors are particularly prone to this problem). */ | |
840 | if (state->edid.read_retries) { | |
841 | state->edid.read_retries--; | |
15edc1cc | 842 | v4l2_dbg(1, debug, sd, "%s: edid read failed\n", __func__); |
15edc1cc MB |
843 | ad9389b_s_power(sd, false); |
844 | ad9389b_s_power(sd, true); | |
969ac39e | 845 | schedule_delayed_work(&state->edid_handler, EDID_DELAY); |
117a55b6 HV |
846 | return; |
847 | } | |
848 | } | |
849 | ||
850 | /* We failed to read the EDID, so send an event for this. */ | |
851 | ed.present = false; | |
852 | ed.segment = ad9389b_rd(sd, 0xc4); | |
853 | v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed); | |
854 | v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__); | |
855 | } | |
856 | ||
857 | static void ad9389b_audio_setup(struct v4l2_subdev *sd) | |
858 | { | |
859 | v4l2_dbg(1, debug, sd, "%s\n", __func__); | |
860 | ||
861 | ad9389b_s_i2s_clock_freq(sd, 48000); | |
862 | ad9389b_s_clock_freq(sd, 48000); | |
863 | ad9389b_s_routing(sd, 0, 0, 0); | |
864 | } | |
865 | ||
866 | /* Initial setup of AD9389b */ | |
867 | ||
868 | /* Configure hdmi transmitter. */ | |
869 | static void ad9389b_setup(struct v4l2_subdev *sd) | |
870 | { | |
871 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
872 | ||
873 | v4l2_dbg(1, debug, sd, "%s\n", __func__); | |
874 | ||
875 | /* Input format: RGB 4:4:4 */ | |
876 | ad9389b_wr_and_or(sd, 0x15, 0xf1, 0x0); | |
877 | /* Output format: RGB 4:4:4 */ | |
878 | ad9389b_wr_and_or(sd, 0x16, 0x3f, 0x0); | |
f3b33ede MR |
879 | /* 1st order interpolation 4:2:2 -> 4:4:4 up conversion, |
880 | Aspect ratio: 16:9 */ | |
881 | ad9389b_wr_and_or(sd, 0x17, 0xf9, 0x06); | |
117a55b6 HV |
882 | /* Output format: RGB 4:4:4, Active Format Information is valid. */ |
883 | ad9389b_wr_and_or(sd, 0x45, 0xc7, 0x08); | |
884 | /* Underscanned */ | |
885 | ad9389b_wr_and_or(sd, 0x46, 0x3f, 0x80); | |
886 | /* Setup video format */ | |
887 | ad9389b_wr(sd, 0x3c, 0x0); | |
888 | /* Active format aspect ratio: same as picure. */ | |
889 | ad9389b_wr(sd, 0x47, 0x80); | |
890 | /* No encryption */ | |
891 | ad9389b_wr_and_or(sd, 0xaf, 0xef, 0x0); | |
892 | /* Positive clk edge capture for input video clock */ | |
893 | ad9389b_wr_and_or(sd, 0xba, 0x1f, 0x60); | |
894 | ||
895 | ad9389b_audio_setup(sd); | |
896 | ||
897 | v4l2_ctrl_handler_setup(&state->hdl); | |
898 | ||
899 | ad9389b_set_IT_content_AVI_InfoFrame(sd); | |
900 | } | |
901 | ||
902 | static void ad9389b_notify_monitor_detect(struct v4l2_subdev *sd) | |
903 | { | |
904 | struct ad9389b_monitor_detect mdt; | |
905 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
906 | ||
907 | mdt.present = state->have_monitor; | |
908 | v4l2_subdev_notify(sd, AD9389B_MONITOR_DETECT, (void *)&mdt); | |
909 | } | |
910 | ||
a6c98f56 | 911 | static void ad9389b_update_monitor_present_status(struct v4l2_subdev *sd) |
117a55b6 HV |
912 | { |
913 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
914 | /* read hotplug and rx-sense state */ | |
915 | u8 status = ad9389b_rd(sd, 0x42); | |
916 | ||
917 | v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n", | |
51af70bf MB |
918 | __func__, |
919 | status, | |
920 | status & MASK_AD9389B_HPD_DETECT ? ", hotplug" : "", | |
921 | status & MASK_AD9389B_MSEN_DETECT ? ", rx-sense" : ""); | |
117a55b6 | 922 | |
51af70bf | 923 | if (status & MASK_AD9389B_HPD_DETECT) { |
117a55b6 | 924 | v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__); |
51af70bf MB |
925 | state->have_monitor = true; |
926 | if (!ad9389b_s_power(sd, true)) { | |
927 | v4l2_dbg(1, debug, sd, | |
928 | "%s: monitor detected, powerup failed\n", __func__); | |
929 | return; | |
930 | } | |
931 | ad9389b_setup(sd); | |
932 | ad9389b_notify_monitor_detect(sd); | |
117a55b6 | 933 | state->edid.read_retries = EDID_MAX_RETRIES; |
969ac39e | 934 | schedule_delayed_work(&state->edid_handler, EDID_DELAY); |
117a55b6 HV |
935 | } else if (!(status & MASK_AD9389B_HPD_DETECT)) { |
936 | v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__); | |
51af70bf MB |
937 | state->have_monitor = false; |
938 | ad9389b_notify_monitor_detect(sd); | |
117a55b6 HV |
939 | ad9389b_s_power(sd, false); |
940 | memset(&state->edid, 0, sizeof(struct ad9389b_state_edid)); | |
941 | } | |
942 | ||
943 | /* update read only ctrls */ | |
944 | v4l2_ctrl_s_ctrl(state->hotplug_ctrl, ad9389b_have_hotplug(sd) ? 0x1 : 0x0); | |
945 | v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, ad9389b_have_rx_sense(sd) ? 0x1 : 0x0); | |
946 | v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); | |
51af70bf MB |
947 | |
948 | /* update with setting from ctrls */ | |
949 | ad9389b_s_ctrl(state->rgb_quantization_range_ctrl); | |
950 | ad9389b_s_ctrl(state->hdmi_mode_ctrl); | |
117a55b6 HV |
951 | } |
952 | ||
a6c98f56 MB |
953 | static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd) |
954 | { | |
955 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
956 | int retry = 0; | |
957 | ||
958 | ad9389b_update_monitor_present_status(sd); | |
959 | ||
960 | /* | |
961 | * Rapid toggling of the hotplug may leave the chip powered off, | |
962 | * even if we think it is on. In that case reset and power up again. | |
963 | */ | |
964 | while (state->power_on && (ad9389b_rd(sd, 0x41) & 0x40)) { | |
965 | if (++retry > 5) { | |
966 | v4l2_err(sd, "retried %d times, give up\n", retry); | |
967 | return; | |
968 | } | |
969 | v4l2_dbg(1, debug, sd, "%s: reset and re-check status (%d)\n", __func__, retry); | |
970 | ad9389b_notify_monitor_detect(sd); | |
971 | cancel_delayed_work_sync(&state->edid_handler); | |
972 | memset(&state->edid, 0, sizeof(struct ad9389b_state_edid)); | |
973 | ad9389b_s_power(sd, false); | |
974 | ad9389b_update_monitor_present_status(sd); | |
975 | } | |
976 | } | |
977 | ||
117a55b6 HV |
978 | static bool edid_block_verify_crc(u8 *edid_block) |
979 | { | |
117a55b6 | 980 | u8 sum = 0; |
350a1815 | 981 | int i; |
117a55b6 | 982 | |
350a1815 MB |
983 | for (i = 0; i < 128; i++) |
984 | sum += edid_block[i]; | |
985 | return sum == 0; | |
117a55b6 HV |
986 | } |
987 | ||
bafd5d79 | 988 | static bool edid_verify_crc(struct v4l2_subdev *sd, u32 segment) |
117a55b6 HV |
989 | { |
990 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
991 | u32 blocks = state->edid.blocks; | |
992 | u8 *data = state->edid.data; | |
993 | ||
994 | if (edid_block_verify_crc(&data[segment * 256])) { | |
995 | if ((segment + 1) * 2 <= blocks) | |
996 | return edid_block_verify_crc(&data[segment * 256 + 128]); | |
997 | return true; | |
998 | } | |
999 | return false; | |
1000 | } | |
1001 | ||
bafd5d79 MR |
1002 | static bool edid_verify_header(struct v4l2_subdev *sd, u32 segment) |
1003 | { | |
1004 | static const u8 hdmi_header[] = { | |
1005 | 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 | |
1006 | }; | |
1007 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
1008 | u8 *data = state->edid.data; | |
1009 | int i; | |
1010 | ||
1011 | if (segment) | |
1012 | return true; | |
1013 | ||
1014 | for (i = 0; i < ARRAY_SIZE(hdmi_header); i++) | |
1015 | if (data[i] != hdmi_header[i]) | |
1016 | return false; | |
1017 | ||
1018 | return true; | |
1019 | } | |
1020 | ||
117a55b6 HV |
1021 | static bool ad9389b_check_edid_status(struct v4l2_subdev *sd) |
1022 | { | |
1023 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
1024 | struct ad9389b_edid_detect ed; | |
1025 | int segment; | |
1026 | u8 edidRdy = ad9389b_rd(sd, 0xc5); | |
1027 | ||
1028 | v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n", | |
d3ec7de4 | 1029 | __func__, EDID_MAX_RETRIES - state->edid.read_retries); |
117a55b6 HV |
1030 | |
1031 | if (!(edidRdy & MASK_AD9389B_EDID_RDY)) | |
1032 | return false; | |
1033 | ||
1034 | segment = ad9389b_rd(sd, 0xc4); | |
1035 | if (segment >= EDID_MAX_SEGM) { | |
1036 | v4l2_err(sd, "edid segment number too big\n"); | |
1037 | return false; | |
1038 | } | |
1039 | v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment); | |
1040 | ad9389b_edid_rd(sd, 256, &state->edid.data[segment * 256]); | |
1041 | ad9389b_dbg_dump_edid(2, debug, sd, segment, | |
d3ec7de4 | 1042 | &state->edid.data[segment * 256]); |
117a55b6 HV |
1043 | if (segment == 0) { |
1044 | state->edid.blocks = state->edid.data[0x7e] + 1; | |
1045 | v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", | |
d3ec7de4 | 1046 | __func__, state->edid.blocks); |
117a55b6 | 1047 | } |
bafd5d79 | 1048 | if (!edid_verify_crc(sd, segment) || |
d3ec7de4 | 1049 | !edid_verify_header(sd, segment)) { |
117a55b6 | 1050 | /* edid crc error, force reread of edid segment */ |
bafd5d79 | 1051 | v4l2_err(sd, "%s: edid crc or header error\n", __func__); |
117a55b6 HV |
1052 | ad9389b_s_power(sd, false); |
1053 | ad9389b_s_power(sd, true); | |
1054 | return false; | |
1055 | } | |
1056 | /* one more segment read ok */ | |
1057 | state->edid.segments = segment + 1; | |
1058 | if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) { | |
1059 | /* Request next EDID segment */ | |
1060 | v4l2_dbg(1, debug, sd, "%s: request segment %d\n", | |
d3ec7de4 | 1061 | __func__, state->edid.segments); |
117a55b6 HV |
1062 | ad9389b_wr(sd, 0xc9, 0xf); |
1063 | ad9389b_wr(sd, 0xc4, state->edid.segments); | |
1064 | state->edid.read_retries = EDID_MAX_RETRIES; | |
969ac39e | 1065 | schedule_delayed_work(&state->edid_handler, EDID_DELAY); |
117a55b6 HV |
1066 | return false; |
1067 | } | |
1068 | ||
1069 | /* report when we have all segments but report only for segment 0 */ | |
1070 | ed.present = true; | |
1071 | ed.segment = 0; | |
1072 | v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed); | |
1073 | state->edid_detect_counter++; | |
1074 | v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0); | |
1075 | return ed.present; | |
1076 | } | |
1077 | ||
1078 | /* ----------------------------------------------------------------------- */ | |
1079 | ||
1080 | static void ad9389b_init_setup(struct v4l2_subdev *sd) | |
1081 | { | |
1082 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
1083 | struct ad9389b_state_edid *edid = &state->edid; | |
1084 | ||
1085 | v4l2_dbg(1, debug, sd, "%s\n", __func__); | |
1086 | ||
1087 | /* clear all interrupts */ | |
1088 | ad9389b_wr(sd, 0x96, 0xff); | |
1089 | ||
1090 | memset(edid, 0, sizeof(struct ad9389b_state_edid)); | |
1091 | state->have_monitor = false; | |
1092 | ad9389b_set_isr(sd, false); | |
1093 | } | |
1094 | ||
1095 | static int ad9389b_probe(struct i2c_client *client, const struct i2c_device_id *id) | |
1096 | { | |
1097 | const struct v4l2_dv_timings dv1080p60 = V4L2_DV_BT_CEA_1920X1080P60; | |
1098 | struct ad9389b_state *state; | |
1099 | struct ad9389b_platform_data *pdata = client->dev.platform_data; | |
1100 | struct v4l2_ctrl_handler *hdl; | |
1101 | struct v4l2_subdev *sd; | |
1102 | int err = -EIO; | |
1103 | ||
1104 | /* Check if the adapter supports the needed features */ | |
1105 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
1106 | return -EIO; | |
1107 | ||
1108 | v4l_dbg(1, debug, client, "detecting ad9389b client on address 0x%x\n", | |
d3ec7de4 | 1109 | client->addr << 1); |
117a55b6 | 1110 | |
c02b211d | 1111 | state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL); |
117a55b6 HV |
1112 | if (!state) |
1113 | return -ENOMEM; | |
1114 | ||
1115 | /* Platform data */ | |
1116 | if (pdata == NULL) { | |
1117 | v4l_err(client, "No platform data!\n"); | |
c02b211d | 1118 | return -ENODEV; |
117a55b6 HV |
1119 | } |
1120 | memcpy(&state->pdata, pdata, sizeof(state->pdata)); | |
1121 | ||
1122 | sd = &state->sd; | |
1123 | v4l2_i2c_subdev_init(sd, client, &ad9389b_ops); | |
1124 | sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; | |
1125 | ||
1126 | hdl = &state->hdl; | |
1127 | v4l2_ctrl_handler_init(hdl, 5); | |
1128 | ||
117a55b6 HV |
1129 | state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops, |
1130 | V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI, | |
1131 | 0, V4L2_DV_TX_MODE_DVI_D); | |
117a55b6 HV |
1132 | state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL, |
1133 | V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0); | |
117a55b6 HV |
1134 | state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL, |
1135 | V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0); | |
117a55b6 HV |
1136 | state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL, |
1137 | V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0); | |
117a55b6 HV |
1138 | state->rgb_quantization_range_ctrl = |
1139 | v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops, | |
1140 | V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, | |
1141 | 0, V4L2_DV_RGB_RANGE_AUTO); | |
117a55b6 HV |
1142 | sd->ctrl_handler = hdl; |
1143 | if (hdl->error) { | |
1144 | err = hdl->error; | |
1145 | ||
1146 | goto err_hdl; | |
1147 | } | |
117a55b6 | 1148 | state->pad.flags = MEDIA_PAD_FL_SINK; |
ab22e77c | 1149 | err = media_entity_pads_init(&sd->entity, 1, &state->pad); |
117a55b6 HV |
1150 | if (err) |
1151 | goto err_hdl; | |
1152 | ||
1153 | state->chip_revision = ad9389b_rd(sd, 0x0); | |
1154 | if (state->chip_revision != 2) { | |
1155 | v4l2_err(sd, "chip_revision %d != 2\n", state->chip_revision); | |
1156 | err = -EIO; | |
1157 | goto err_entity; | |
1158 | } | |
1159 | v4l2_dbg(1, debug, sd, "reg 0x41 0x%x, chip version (reg 0x00) 0x%x\n", | |
d3ec7de4 | 1160 | ad9389b_rd(sd, 0x41), state->chip_revision); |
117a55b6 HV |
1161 | |
1162 | state->edid_i2c_client = i2c_new_dummy(client->adapter, (0x7e>>1)); | |
1163 | if (state->edid_i2c_client == NULL) { | |
1164 | v4l2_err(sd, "failed to register edid i2c client\n"); | |
6ec735df | 1165 | err = -ENOMEM; |
117a55b6 HV |
1166 | goto err_entity; |
1167 | } | |
1168 | ||
117a55b6 HV |
1169 | INIT_DELAYED_WORK(&state->edid_handler, ad9389b_edid_handler); |
1170 | state->dv_timings = dv1080p60; | |
1171 | ||
1172 | ad9389b_init_setup(sd); | |
1173 | ad9389b_set_isr(sd, true); | |
1174 | ||
1175 | v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, | |
d3ec7de4 | 1176 | client->addr << 1, client->adapter->name); |
117a55b6 HV |
1177 | return 0; |
1178 | ||
117a55b6 HV |
1179 | err_entity: |
1180 | media_entity_cleanup(&sd->entity); | |
1181 | err_hdl: | |
1182 | v4l2_ctrl_handler_free(&state->hdl); | |
117a55b6 HV |
1183 | return err; |
1184 | } | |
1185 | ||
1186 | /* ----------------------------------------------------------------------- */ | |
1187 | ||
1188 | static int ad9389b_remove(struct i2c_client *client) | |
1189 | { | |
1190 | struct v4l2_subdev *sd = i2c_get_clientdata(client); | |
1191 | struct ad9389b_state *state = get_ad9389b_state(sd); | |
1192 | ||
1193 | state->chip_revision = -1; | |
1194 | ||
1195 | v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name, | |
1196 | client->addr << 1, client->adapter->name); | |
1197 | ||
1198 | ad9389b_s_stream(sd, false); | |
1199 | ad9389b_s_audio_stream(sd, false); | |
1200 | ad9389b_init_setup(sd); | |
969ac39e | 1201 | cancel_delayed_work_sync(&state->edid_handler); |
117a55b6 | 1202 | i2c_unregister_device(state->edid_i2c_client); |
117a55b6 HV |
1203 | v4l2_device_unregister_subdev(sd); |
1204 | media_entity_cleanup(&sd->entity); | |
1205 | v4l2_ctrl_handler_free(sd->ctrl_handler); | |
117a55b6 HV |
1206 | return 0; |
1207 | } | |
1208 | ||
1209 | /* ----------------------------------------------------------------------- */ | |
1210 | ||
1211 | static struct i2c_device_id ad9389b_id[] = { | |
e1277110 HV |
1212 | { "ad9389b", 0 }, |
1213 | { "ad9889b", 0 }, | |
117a55b6 HV |
1214 | { } |
1215 | }; | |
1216 | MODULE_DEVICE_TABLE(i2c, ad9389b_id); | |
1217 | ||
1218 | static struct i2c_driver ad9389b_driver = { | |
1219 | .driver = { | |
117a55b6 HV |
1220 | .name = "ad9389b", |
1221 | }, | |
1222 | .probe = ad9389b_probe, | |
1223 | .remove = ad9389b_remove, | |
1224 | .id_table = ad9389b_id, | |
1225 | }; | |
1226 | ||
1227 | module_i2c_driver(ad9389b_driver); |