]>
Commit | Line | Data |
---|---|---|
7da8a6cb MK |
1 | /* |
2 | * Copyright (C) 2008-2009 Texas Instruments Inc | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License as published by | |
6 | * the Free Software Foundation; either version 2 of the License, or | |
7 | * (at your option) any later version. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, | |
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | * GNU General Public License for more details. | |
13 | * | |
14 | * You should have received a copy of the GNU General Public License | |
15 | * along with this program; if not, write to the Free Software | |
16 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
17 | * | |
18 | * Driver name : VPFE Capture driver | |
19 | * VPFE Capture driver allows applications to capture and stream video | |
20 | * frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as | |
21 | * TVP5146 or Raw Bayer RGB image data from an image sensor | |
22 | * such as Microns' MT9T001, MT9T031 etc. | |
23 | * | |
24 | * These SoCs have, in common, a Video Processing Subsystem (VPSS) that | |
25 | * consists of a Video Processing Front End (VPFE) for capturing | |
26 | * video/raw image data and Video Processing Back End (VPBE) for displaying | |
27 | * YUV data through an in-built analog encoder or Digital LCD port. This | |
28 | * driver is for capture through VPFE. A typical EVM using these SoCs have | |
29 | * following high level configuration. | |
30 | * | |
31 | * | |
32 | * decoder(TVP5146/ YUV/ | |
33 | * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF) | |
34 | * data input | | | |
35 | * V | | |
36 | * SDRAM | | |
37 | * V | |
38 | * Image Processor | |
39 | * | | |
40 | * V | |
41 | * SDRAM | |
42 | * The data flow happens from a decoder connected to the VPFE over a | |
43 | * YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface | |
44 | * and to the input of VPFE through an optional MUX (if more inputs are | |
45 | * to be interfaced on the EVM). The input data is first passed through | |
46 | * CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC | |
47 | * does very little or no processing on YUV data and does pre-process Raw | |
48 | * Bayer RGB data through modules such as Defect Pixel Correction (DFC) | |
49 | * Color Space Conversion (CSC), data gain/offset etc. After this, data | |
50 | * can be written to SDRAM or can be connected to the image processing | |
51 | * block such as IPIPE (on DM355 only). | |
52 | * | |
53 | * Features supported | |
54 | * - MMAP IO | |
55 | * - Capture using TVP5146 over BT.656 | |
56 | * - support for interfacing decoders using sub device model | |
57 | * - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV | |
58 | * data capture to SDRAM. | |
59 | * TODO list | |
60 | * - Support multiple REQBUF after open | |
61 | * - Support for de-allocating buffers through REQBUF | |
62 | * - Support for Raw Bayer RGB capture | |
63 | * - Support for chaining Image Processor | |
64 | * - Support for static allocation of buffers | |
65 | * - Support for USERPTR IO | |
66 | * - Support for STREAMON before QBUF | |
67 | * - Support for control ioctls | |
68 | */ | |
69 | #include <linux/module.h> | |
5a0e3ad6 | 70 | #include <linux/slab.h> |
7da8a6cb MK |
71 | #include <linux/init.h> |
72 | #include <linux/platform_device.h> | |
73 | #include <linux/interrupt.h> | |
7da8a6cb MK |
74 | #include <media/v4l2-common.h> |
75 | #include <linux/io.h> | |
76 | #include <media/davinci/vpfe_capture.h> | |
77 | #include "ccdc_hw_device.h" | |
78 | ||
79 | static int debug; | |
80 | static u32 numbuffers = 3; | |
81 | static u32 bufsize = (720 * 576 * 2); | |
82 | ||
83 | module_param(numbuffers, uint, S_IRUGO); | |
84 | module_param(bufsize, uint, S_IRUGO); | |
85 | module_param(debug, int, 0644); | |
86 | ||
87 | MODULE_PARM_DESC(numbuffers, "buffer count (default:3)"); | |
88 | MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)"); | |
89 | MODULE_PARM_DESC(debug, "Debug level 0-1"); | |
90 | ||
91 | MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver"); | |
92 | MODULE_LICENSE("GPL"); | |
93 | MODULE_AUTHOR("Texas Instruments"); | |
94 | ||
95 | /* standard information */ | |
96 | struct vpfe_standard { | |
97 | v4l2_std_id std_id; | |
98 | unsigned int width; | |
99 | unsigned int height; | |
100 | struct v4l2_fract pixelaspect; | |
101 | /* 0 - progressive, 1 - interlaced */ | |
102 | int frame_format; | |
103 | }; | |
104 | ||
105 | /* ccdc configuration */ | |
106 | struct ccdc_config { | |
107 | /* This make sure vpfe is probed and ready to go */ | |
108 | int vpfe_probed; | |
109 | /* name of ccdc device */ | |
110 | char name[32]; | |
7da8a6cb MK |
111 | }; |
112 | ||
113 | /* data structures */ | |
114 | static struct vpfe_config_params config_params = { | |
115 | .min_numbuffers = 3, | |
116 | .numbuffers = 3, | |
117 | .min_bufsize = 720 * 480 * 2, | |
118 | .device_bufsize = 720 * 576 * 2, | |
119 | }; | |
120 | ||
121 | /* ccdc device registered */ | |
122 | static struct ccdc_hw_device *ccdc_dev; | |
123 | /* lock for accessing ccdc information */ | |
124 | static DEFINE_MUTEX(ccdc_lock); | |
125 | /* ccdc configuration */ | |
126 | static struct ccdc_config *ccdc_cfg; | |
127 | ||
47c0b565 | 128 | static const struct vpfe_standard vpfe_standards[] = { |
7da8a6cb MK |
129 | {V4L2_STD_525_60, 720, 480, {11, 10}, 1}, |
130 | {V4L2_STD_625_50, 720, 576, {54, 59}, 1}, | |
131 | }; | |
132 | ||
133 | /* Used when raw Bayer image from ccdc is directly captured to SDRAM */ | |
134 | static const struct vpfe_pixel_format vpfe_pix_fmts[] = { | |
135 | { | |
136 | .fmtdesc = { | |
137 | .index = 0, | |
138 | .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, | |
139 | .description = "Bayer GrRBGb 8bit A-Law compr.", | |
140 | .pixelformat = V4L2_PIX_FMT_SBGGR8, | |
141 | }, | |
142 | .bpp = 1, | |
143 | }, | |
144 | { | |
145 | .fmtdesc = { | |
146 | .index = 1, | |
147 | .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, | |
148 | .description = "Bayer GrRBGb - 16bit", | |
149 | .pixelformat = V4L2_PIX_FMT_SBGGR16, | |
150 | }, | |
151 | .bpp = 2, | |
152 | }, | |
153 | { | |
154 | .fmtdesc = { | |
155 | .index = 2, | |
156 | .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, | |
157 | .description = "Bayer GrRBGb 8bit DPCM compr.", | |
158 | .pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8, | |
159 | }, | |
160 | .bpp = 1, | |
161 | }, | |
162 | { | |
163 | .fmtdesc = { | |
164 | .index = 3, | |
165 | .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, | |
166 | .description = "YCbCr 4:2:2 Interleaved UYVY", | |
167 | .pixelformat = V4L2_PIX_FMT_UYVY, | |
168 | }, | |
169 | .bpp = 2, | |
170 | }, | |
171 | { | |
172 | .fmtdesc = { | |
173 | .index = 4, | |
174 | .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, | |
175 | .description = "YCbCr 4:2:2 Interleaved YUYV", | |
176 | .pixelformat = V4L2_PIX_FMT_YUYV, | |
177 | }, | |
178 | .bpp = 2, | |
179 | }, | |
180 | { | |
181 | .fmtdesc = { | |
182 | .index = 5, | |
183 | .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, | |
184 | .description = "Y/CbCr 4:2:0 - Semi planar", | |
185 | .pixelformat = V4L2_PIX_FMT_NV12, | |
186 | }, | |
187 | .bpp = 1, | |
188 | }, | |
189 | }; | |
190 | ||
191 | /* | |
192 | * vpfe_lookup_pix_format() | |
193 | * lookup an entry in the vpfe pix format table based on pix_format | |
194 | */ | |
195 | static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format) | |
196 | { | |
197 | int i; | |
198 | ||
199 | for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) { | |
200 | if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat) | |
201 | return &vpfe_pix_fmts[i]; | |
202 | } | |
203 | return NULL; | |
204 | } | |
205 | ||
206 | /* | |
207 | * vpfe_register_ccdc_device. CCDC module calls this to | |
208 | * register with vpfe capture | |
209 | */ | |
210 | int vpfe_register_ccdc_device(struct ccdc_hw_device *dev) | |
211 | { | |
212 | int ret = 0; | |
213 | printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name); | |
214 | ||
215 | BUG_ON(!dev->hw_ops.open); | |
216 | BUG_ON(!dev->hw_ops.enable); | |
217 | BUG_ON(!dev->hw_ops.set_hw_if_params); | |
218 | BUG_ON(!dev->hw_ops.configure); | |
219 | BUG_ON(!dev->hw_ops.set_buftype); | |
220 | BUG_ON(!dev->hw_ops.get_buftype); | |
221 | BUG_ON(!dev->hw_ops.enum_pix); | |
222 | BUG_ON(!dev->hw_ops.set_frame_format); | |
223 | BUG_ON(!dev->hw_ops.get_frame_format); | |
224 | BUG_ON(!dev->hw_ops.get_pixel_format); | |
225 | BUG_ON(!dev->hw_ops.set_pixel_format); | |
7da8a6cb MK |
226 | BUG_ON(!dev->hw_ops.set_image_window); |
227 | BUG_ON(!dev->hw_ops.get_image_window); | |
228 | BUG_ON(!dev->hw_ops.get_line_length); | |
7da8a6cb MK |
229 | BUG_ON(!dev->hw_ops.getfid); |
230 | ||
231 | mutex_lock(&ccdc_lock); | |
232 | if (NULL == ccdc_cfg) { | |
233 | /* | |
234 | * TODO. Will this ever happen? if so, we need to fix it. | |
235 | * Proabably we need to add the request to a linked list and | |
236 | * walk through it during vpfe probe | |
237 | */ | |
238 | printk(KERN_ERR "vpfe capture not initialized\n"); | |
51444ea3 | 239 | ret = -EFAULT; |
7da8a6cb MK |
240 | goto unlock; |
241 | } | |
242 | ||
243 | if (strcmp(dev->name, ccdc_cfg->name)) { | |
244 | /* ignore this ccdc */ | |
51444ea3 | 245 | ret = -EINVAL; |
7da8a6cb MK |
246 | goto unlock; |
247 | } | |
248 | ||
249 | if (ccdc_dev) { | |
250 | printk(KERN_ERR "ccdc already registered\n"); | |
51444ea3 | 251 | ret = -EINVAL; |
7da8a6cb MK |
252 | goto unlock; |
253 | } | |
254 | ||
255 | ccdc_dev = dev; | |
7da8a6cb MK |
256 | unlock: |
257 | mutex_unlock(&ccdc_lock); | |
258 | return ret; | |
259 | } | |
260 | EXPORT_SYMBOL(vpfe_register_ccdc_device); | |
261 | ||
262 | /* | |
263 | * vpfe_unregister_ccdc_device. CCDC module calls this to | |
264 | * unregister with vpfe capture | |
265 | */ | |
266 | void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev) | |
267 | { | |
268 | if (NULL == dev) { | |
269 | printk(KERN_ERR "invalid ccdc device ptr\n"); | |
270 | return; | |
271 | } | |
272 | ||
273 | printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n", | |
274 | dev->name); | |
275 | ||
276 | if (strcmp(dev->name, ccdc_cfg->name)) { | |
277 | /* ignore this ccdc */ | |
278 | return; | |
279 | } | |
280 | ||
281 | mutex_lock(&ccdc_lock); | |
282 | ccdc_dev = NULL; | |
283 | mutex_unlock(&ccdc_lock); | |
284 | return; | |
285 | } | |
286 | EXPORT_SYMBOL(vpfe_unregister_ccdc_device); | |
287 | ||
288 | /* | |
289 | * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings | |
290 | */ | |
291 | static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev, | |
292 | struct v4l2_format *f) | |
293 | { | |
294 | struct v4l2_rect image_win; | |
295 | enum ccdc_buftype buf_type; | |
296 | enum ccdc_frmfmt frm_fmt; | |
297 | ||
298 | memset(f, 0, sizeof(*f)); | |
299 | f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; | |
300 | ccdc_dev->hw_ops.get_image_window(&image_win); | |
301 | f->fmt.pix.width = image_win.width; | |
302 | f->fmt.pix.height = image_win.height; | |
303 | f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length(); | |
304 | f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * | |
305 | f->fmt.pix.height; | |
306 | buf_type = ccdc_dev->hw_ops.get_buftype(); | |
307 | f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format(); | |
308 | frm_fmt = ccdc_dev->hw_ops.get_frame_format(); | |
309 | if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE) | |
310 | f->fmt.pix.field = V4L2_FIELD_NONE; | |
311 | else if (frm_fmt == CCDC_FRMFMT_INTERLACED) { | |
312 | if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) | |
313 | f->fmt.pix.field = V4L2_FIELD_INTERLACED; | |
314 | else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED) | |
315 | f->fmt.pix.field = V4L2_FIELD_SEQ_TB; | |
316 | else { | |
317 | v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n"); | |
318 | return -EINVAL; | |
319 | } | |
320 | } else { | |
321 | v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n"); | |
322 | return -EINVAL; | |
323 | } | |
324 | return 0; | |
325 | } | |
326 | ||
327 | /* | |
328 | * vpfe_config_ccdc_image_format() | |
329 | * For a pix format, configure ccdc to setup the capture | |
330 | */ | |
331 | static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev) | |
332 | { | |
333 | enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED; | |
334 | int ret = 0; | |
335 | ||
336 | if (ccdc_dev->hw_ops.set_pixel_format( | |
337 | vpfe_dev->fmt.fmt.pix.pixelformat) < 0) { | |
338 | v4l2_err(&vpfe_dev->v4l2_dev, | |
339 | "couldn't set pix format in ccdc\n"); | |
340 | return -EINVAL; | |
341 | } | |
342 | /* configure the image window */ | |
343 | ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop); | |
344 | ||
345 | switch (vpfe_dev->fmt.fmt.pix.field) { | |
346 | case V4L2_FIELD_INTERLACED: | |
347 | /* do nothing, since it is default */ | |
348 | ret = ccdc_dev->hw_ops.set_buftype( | |
349 | CCDC_BUFTYPE_FLD_INTERLEAVED); | |
350 | break; | |
351 | case V4L2_FIELD_NONE: | |
352 | frm_fmt = CCDC_FRMFMT_PROGRESSIVE; | |
353 | /* buffer type only applicable for interlaced scan */ | |
354 | break; | |
355 | case V4L2_FIELD_SEQ_TB: | |
356 | ret = ccdc_dev->hw_ops.set_buftype( | |
357 | CCDC_BUFTYPE_FLD_SEPARATED); | |
358 | break; | |
359 | default: | |
360 | return -EINVAL; | |
361 | } | |
362 | ||
363 | /* set the frame format */ | |
364 | if (!ret) | |
365 | ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt); | |
366 | return ret; | |
367 | } | |
368 | /* | |
369 | * vpfe_config_image_format() | |
370 | * For a given standard, this functions sets up the default | |
371 | * pix format & crop values in the vpfe device and ccdc. It first | |
372 | * starts with defaults based values from the standard table. | |
da298c6d | 373 | * It then checks if sub device supports get_fmt and then override the |
7da8a6cb MK |
374 | * values based on that.Sets crop values to match with scan resolution |
375 | * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the | |
376 | * values in ccdc | |
377 | */ | |
378 | static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, | |
314527ac | 379 | v4l2_std_id std_id) |
7da8a6cb MK |
380 | { |
381 | struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev; | |
da298c6d HV |
382 | struct v4l2_subdev_format fmt = { |
383 | .which = V4L2_SUBDEV_FORMAT_ACTIVE, | |
384 | }; | |
385 | struct v4l2_mbus_framefmt *mbus_fmt = &fmt.format; | |
d3ca7759 | 386 | struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix; |
7da8a6cb MK |
387 | int i, ret = 0; |
388 | ||
389 | for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) { | |
314527ac | 390 | if (vpfe_standards[i].std_id & std_id) { |
7da8a6cb MK |
391 | vpfe_dev->std_info.active_pixels = |
392 | vpfe_standards[i].width; | |
393 | vpfe_dev->std_info.active_lines = | |
394 | vpfe_standards[i].height; | |
395 | vpfe_dev->std_info.frame_format = | |
396 | vpfe_standards[i].frame_format; | |
397 | vpfe_dev->std_index = i; | |
398 | break; | |
399 | } | |
400 | } | |
401 | ||
402 | if (i == ARRAY_SIZE(vpfe_standards)) { | |
403 | v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n"); | |
404 | return -EINVAL; | |
405 | } | |
406 | ||
407 | vpfe_dev->crop.top = 0; | |
408 | vpfe_dev->crop.left = 0; | |
409 | vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels; | |
410 | vpfe_dev->crop.height = vpfe_dev->std_info.active_lines; | |
d3ca7759 HV |
411 | pix->width = vpfe_dev->crop.width; |
412 | pix->height = vpfe_dev->crop.height; | |
7da8a6cb MK |
413 | |
414 | /* first field and frame format based on standard frame format */ | |
415 | if (vpfe_dev->std_info.frame_format) { | |
d3ca7759 | 416 | pix->field = V4L2_FIELD_INTERLACED; |
7da8a6cb | 417 | /* assume V4L2_PIX_FMT_UYVY as default */ |
d3ca7759 | 418 | pix->pixelformat = V4L2_PIX_FMT_UYVY; |
da298c6d | 419 | v4l2_fill_mbus_format(mbus_fmt, pix, |
27ffaeb0 | 420 | MEDIA_BUS_FMT_YUYV10_2X10); |
7da8a6cb | 421 | } else { |
d3ca7759 | 422 | pix->field = V4L2_FIELD_NONE; |
7da8a6cb | 423 | /* assume V4L2_PIX_FMT_SBGGR8 */ |
d3ca7759 | 424 | pix->pixelformat = V4L2_PIX_FMT_SBGGR8; |
da298c6d | 425 | v4l2_fill_mbus_format(mbus_fmt, pix, |
27ffaeb0 | 426 | MEDIA_BUS_FMT_SBGGR8_1X8); |
7da8a6cb MK |
427 | } |
428 | ||
da298c6d | 429 | /* if sub device supports get_fmt, override the defaults */ |
7da8a6cb | 430 | ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, |
da298c6d | 431 | sdinfo->grp_id, pad, get_fmt, NULL, &fmt); |
7da8a6cb MK |
432 | |
433 | if (ret && ret != -ENOIOCTLCMD) { | |
434 | v4l2_err(&vpfe_dev->v4l2_dev, | |
da298c6d | 435 | "error in getting get_fmt from sub device\n"); |
7da8a6cb MK |
436 | return ret; |
437 | } | |
da298c6d | 438 | v4l2_fill_pix_format(pix, mbus_fmt); |
d3ca7759 HV |
439 | pix->bytesperline = pix->width * 2; |
440 | pix->sizeimage = pix->bytesperline * pix->height; | |
7da8a6cb MK |
441 | |
442 | /* Sets the values in CCDC */ | |
443 | ret = vpfe_config_ccdc_image_format(vpfe_dev); | |
444 | if (ret) | |
445 | return ret; | |
446 | ||
447 | /* Update the values of sizeimage and bytesperline */ | |
692f6375 DC |
448 | pix->bytesperline = ccdc_dev->hw_ops.get_line_length(); |
449 | pix->sizeimage = pix->bytesperline * pix->height; | |
450 | ||
451 | return 0; | |
7da8a6cb MK |
452 | } |
453 | ||
454 | static int vpfe_initialize_device(struct vpfe_device *vpfe_dev) | |
455 | { | |
456 | int ret = 0; | |
457 | ||
458 | /* set first input of current subdevice as the current input */ | |
459 | vpfe_dev->current_input = 0; | |
460 | ||
461 | /* set default standard */ | |
462 | vpfe_dev->std_index = 0; | |
463 | ||
464 | /* Configure the default format information */ | |
465 | ret = vpfe_config_image_format(vpfe_dev, | |
314527ac | 466 | vpfe_standards[vpfe_dev->std_index].std_id); |
7da8a6cb MK |
467 | if (ret) |
468 | return ret; | |
469 | ||
470 | /* now open the ccdc device to initialize it */ | |
471 | mutex_lock(&ccdc_lock); | |
472 | if (NULL == ccdc_dev) { | |
473 | v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n"); | |
474 | ret = -ENODEV; | |
475 | goto unlock; | |
476 | } | |
477 | ||
478 | if (!try_module_get(ccdc_dev->owner)) { | |
479 | v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n"); | |
480 | ret = -ENODEV; | |
481 | goto unlock; | |
482 | } | |
483 | ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev); | |
484 | if (!ret) | |
485 | vpfe_dev->initialized = 1; | |
085b54a2 VH |
486 | |
487 | /* Clear all VPFE/CCDC interrupts */ | |
488 | if (vpfe_dev->cfg->clr_intr) | |
489 | vpfe_dev->cfg->clr_intr(-1); | |
490 | ||
7da8a6cb MK |
491 | unlock: |
492 | mutex_unlock(&ccdc_lock); | |
493 | return ret; | |
494 | } | |
495 | ||
496 | /* | |
497 | * vpfe_open : It creates object of file handle structure and | |
498 | * stores it in private_data member of filepointer | |
499 | */ | |
500 | static int vpfe_open(struct file *file) | |
501 | { | |
502 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
3bdaa382 | 503 | struct video_device *vdev = video_devdata(file); |
7da8a6cb MK |
504 | struct vpfe_fh *fh; |
505 | ||
506 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n"); | |
507 | ||
508 | if (!vpfe_dev->cfg->num_subdevs) { | |
509 | v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n"); | |
510 | return -ENODEV; | |
511 | } | |
512 | ||
513 | /* Allocate memory for the file handle object */ | |
514 | fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL); | |
515 | if (NULL == fh) { | |
516 | v4l2_err(&vpfe_dev->v4l2_dev, | |
517 | "unable to allocate memory for file handle object\n"); | |
518 | return -ENOMEM; | |
519 | } | |
520 | /* store pointer to fh in private_data member of file */ | |
521 | file->private_data = fh; | |
522 | fh->vpfe_dev = vpfe_dev; | |
3bdaa382 | 523 | v4l2_fh_init(&fh->fh, vdev); |
7da8a6cb MK |
524 | mutex_lock(&vpfe_dev->lock); |
525 | /* If decoder is not initialized. initialize it */ | |
526 | if (!vpfe_dev->initialized) { | |
527 | if (vpfe_initialize_device(vpfe_dev)) { | |
528 | mutex_unlock(&vpfe_dev->lock); | |
529 | return -ENODEV; | |
530 | } | |
531 | } | |
532 | /* Increment device usrs counter */ | |
533 | vpfe_dev->usrs++; | |
534 | /* Set io_allowed member to false */ | |
535 | fh->io_allowed = 0; | |
3bdaa382 | 536 | v4l2_fh_add(&fh->fh); |
7da8a6cb MK |
537 | mutex_unlock(&vpfe_dev->lock); |
538 | return 0; | |
539 | } | |
540 | ||
541 | static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev) | |
542 | { | |
543 | unsigned long addr; | |
544 | ||
545 | vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, | |
546 | struct videobuf_buffer, queue); | |
547 | list_del(&vpfe_dev->next_frm->queue); | |
548 | vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE; | |
549 | addr = videobuf_to_dma_contig(vpfe_dev->next_frm); | |
844cc0dc VH |
550 | |
551 | ccdc_dev->hw_ops.setfbaddr(addr); | |
552 | } | |
553 | ||
554 | static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev) | |
555 | { | |
556 | unsigned long addr; | |
557 | ||
558 | addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); | |
559 | addr += vpfe_dev->field_off; | |
7da8a6cb MK |
560 | ccdc_dev->hw_ops.setfbaddr(addr); |
561 | } | |
562 | ||
563 | static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev) | |
564 | { | |
8e6057b5 | 565 | v4l2_get_timestamp(&vpfe_dev->cur_frm->ts); |
7da8a6cb MK |
566 | vpfe_dev->cur_frm->state = VIDEOBUF_DONE; |
567 | vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage; | |
568 | wake_up_interruptible(&vpfe_dev->cur_frm->done); | |
569 | vpfe_dev->cur_frm = vpfe_dev->next_frm; | |
570 | } | |
571 | ||
572 | /* ISR for VINT0*/ | |
573 | static irqreturn_t vpfe_isr(int irq, void *dev_id) | |
574 | { | |
575 | struct vpfe_device *vpfe_dev = dev_id; | |
576 | enum v4l2_field field; | |
7da8a6cb MK |
577 | int fid; |
578 | ||
579 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n"); | |
580 | field = vpfe_dev->fmt.fmt.pix.field; | |
581 | ||
582 | /* if streaming not started, don't do anything */ | |
583 | if (!vpfe_dev->started) | |
085b54a2 | 584 | goto clear_intr; |
7da8a6cb MK |
585 | |
586 | /* only for 6446 this will be applicable */ | |
587 | if (NULL != ccdc_dev->hw_ops.reset) | |
588 | ccdc_dev->hw_ops.reset(); | |
589 | ||
590 | if (field == V4L2_FIELD_NONE) { | |
591 | /* handle progressive frame capture */ | |
592 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, | |
593 | "frame format is progressive...\n"); | |
594 | if (vpfe_dev->cur_frm != vpfe_dev->next_frm) | |
595 | vpfe_process_buffer_complete(vpfe_dev); | |
085b54a2 | 596 | goto clear_intr; |
7da8a6cb MK |
597 | } |
598 | ||
599 | /* interlaced or TB capture check which field we are in hardware */ | |
600 | fid = ccdc_dev->hw_ops.getfid(); | |
601 | ||
602 | /* switch the software maintained field id */ | |
603 | vpfe_dev->field_id ^= 1; | |
604 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n", | |
605 | fid, vpfe_dev->field_id); | |
606 | if (fid == vpfe_dev->field_id) { | |
607 | /* we are in-sync here,continue */ | |
608 | if (fid == 0) { | |
609 | /* | |
610 | * One frame is just being captured. If the next frame | |
611 | * is available, release the current frame and move on | |
612 | */ | |
613 | if (vpfe_dev->cur_frm != vpfe_dev->next_frm) | |
614 | vpfe_process_buffer_complete(vpfe_dev); | |
615 | /* | |
616 | * based on whether the two fields are stored | |
617 | * interleavely or separately in memory, reconfigure | |
618 | * the CCDC memory address | |
619 | */ | |
620 | if (field == V4L2_FIELD_SEQ_TB) { | |
844cc0dc | 621 | vpfe_schedule_bottom_field(vpfe_dev); |
7da8a6cb | 622 | } |
085b54a2 | 623 | goto clear_intr; |
7da8a6cb MK |
624 | } |
625 | /* | |
626 | * if one field is just being captured configure | |
627 | * the next frame get the next frame from the empty | |
628 | * queue if no frame is available hold on to the | |
629 | * current buffer | |
630 | */ | |
631 | spin_lock(&vpfe_dev->dma_queue_lock); | |
632 | if (!list_empty(&vpfe_dev->dma_queue) && | |
633 | vpfe_dev->cur_frm == vpfe_dev->next_frm) | |
634 | vpfe_schedule_next_buffer(vpfe_dev); | |
635 | spin_unlock(&vpfe_dev->dma_queue_lock); | |
636 | } else if (fid == 0) { | |
637 | /* | |
638 | * out of sync. Recover from any hardware out-of-sync. | |
639 | * May loose one frame | |
640 | */ | |
641 | vpfe_dev->field_id = fid; | |
642 | } | |
085b54a2 VH |
643 | clear_intr: |
644 | if (vpfe_dev->cfg->clr_intr) | |
645 | vpfe_dev->cfg->clr_intr(irq); | |
646 | ||
7da8a6cb MK |
647 | return IRQ_HANDLED; |
648 | } | |
649 | ||
650 | /* vdint1_isr - isr handler for VINT1 interrupt */ | |
651 | static irqreturn_t vdint1_isr(int irq, void *dev_id) | |
652 | { | |
653 | struct vpfe_device *vpfe_dev = dev_id; | |
654 | ||
655 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n"); | |
656 | ||
657 | /* if streaming not started, don't do anything */ | |
085b54a2 VH |
658 | if (!vpfe_dev->started) { |
659 | if (vpfe_dev->cfg->clr_intr) | |
660 | vpfe_dev->cfg->clr_intr(irq); | |
7da8a6cb | 661 | return IRQ_HANDLED; |
085b54a2 | 662 | } |
7da8a6cb MK |
663 | |
664 | spin_lock(&vpfe_dev->dma_queue_lock); | |
665 | if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) && | |
666 | !list_empty(&vpfe_dev->dma_queue) && | |
667 | vpfe_dev->cur_frm == vpfe_dev->next_frm) | |
668 | vpfe_schedule_next_buffer(vpfe_dev); | |
669 | spin_unlock(&vpfe_dev->dma_queue_lock); | |
085b54a2 VH |
670 | |
671 | if (vpfe_dev->cfg->clr_intr) | |
672 | vpfe_dev->cfg->clr_intr(irq); | |
673 | ||
7da8a6cb MK |
674 | return IRQ_HANDLED; |
675 | } | |
676 | ||
677 | static void vpfe_detach_irq(struct vpfe_device *vpfe_dev) | |
678 | { | |
679 | enum ccdc_frmfmt frame_format; | |
680 | ||
681 | frame_format = ccdc_dev->hw_ops.get_frame_format(); | |
682 | if (frame_format == CCDC_FRMFMT_PROGRESSIVE) | |
1ead696b | 683 | free_irq(vpfe_dev->ccdc_irq1, vpfe_dev); |
7da8a6cb MK |
684 | } |
685 | ||
686 | static int vpfe_attach_irq(struct vpfe_device *vpfe_dev) | |
687 | { | |
688 | enum ccdc_frmfmt frame_format; | |
689 | ||
690 | frame_format = ccdc_dev->hw_ops.get_frame_format(); | |
691 | if (frame_format == CCDC_FRMFMT_PROGRESSIVE) { | |
692 | return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr, | |
d8c279a0 | 693 | 0, "vpfe_capture1", |
7da8a6cb MK |
694 | vpfe_dev); |
695 | } | |
696 | return 0; | |
697 | } | |
698 | ||
699 | /* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */ | |
700 | static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev) | |
701 | { | |
702 | vpfe_dev->started = 0; | |
703 | ccdc_dev->hw_ops.enable(0); | |
704 | if (ccdc_dev->hw_ops.enable_out_to_sdram) | |
705 | ccdc_dev->hw_ops.enable_out_to_sdram(0); | |
706 | } | |
707 | ||
708 | /* | |
709 | * vpfe_release : This function deletes buffer queue, frees the | |
710 | * buffers and the vpfe file handle | |
711 | */ | |
712 | static int vpfe_release(struct file *file) | |
713 | { | |
714 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
715 | struct vpfe_fh *fh = file->private_data; | |
716 | struct vpfe_subdev_info *sdinfo; | |
717 | int ret; | |
718 | ||
719 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n"); | |
720 | ||
721 | /* Get the device lock */ | |
722 | mutex_lock(&vpfe_dev->lock); | |
723 | /* if this instance is doing IO */ | |
724 | if (fh->io_allowed) { | |
725 | if (vpfe_dev->started) { | |
726 | sdinfo = vpfe_dev->current_subdev; | |
727 | ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, | |
728 | sdinfo->grp_id, | |
729 | video, s_stream, 0); | |
730 | if (ret && (ret != -ENOIOCTLCMD)) | |
731 | v4l2_err(&vpfe_dev->v4l2_dev, | |
732 | "stream off failed in subdev\n"); | |
733 | vpfe_stop_ccdc_capture(vpfe_dev); | |
734 | vpfe_detach_irq(vpfe_dev); | |
735 | videobuf_streamoff(&vpfe_dev->buffer_queue); | |
736 | } | |
737 | vpfe_dev->io_usrs = 0; | |
738 | vpfe_dev->numbuffers = config_params.numbuffers; | |
c1d1e40b LP |
739 | videobuf_stop(&vpfe_dev->buffer_queue); |
740 | videobuf_mmap_free(&vpfe_dev->buffer_queue); | |
7da8a6cb MK |
741 | } |
742 | ||
743 | /* Decrement device usrs counter */ | |
744 | vpfe_dev->usrs--; | |
3bdaa382 LP |
745 | v4l2_fh_del(&fh->fh); |
746 | v4l2_fh_exit(&fh->fh); | |
7da8a6cb MK |
747 | /* If this is the last file handle */ |
748 | if (!vpfe_dev->usrs) { | |
749 | vpfe_dev->initialized = 0; | |
750 | if (ccdc_dev->hw_ops.close) | |
751 | ccdc_dev->hw_ops.close(vpfe_dev->pdev); | |
752 | module_put(ccdc_dev->owner); | |
753 | } | |
754 | mutex_unlock(&vpfe_dev->lock); | |
755 | file->private_data = NULL; | |
756 | /* Free memory allocated to file handle object */ | |
757 | kfree(fh); | |
758 | return 0; | |
759 | } | |
760 | ||
761 | /* | |
762 | * vpfe_mmap : It is used to map kernel space buffers | |
763 | * into user spaces | |
764 | */ | |
765 | static int vpfe_mmap(struct file *file, struct vm_area_struct *vma) | |
766 | { | |
767 | /* Get the device object and file handle object */ | |
768 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
769 | ||
770 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n"); | |
771 | ||
772 | return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma); | |
773 | } | |
774 | ||
775 | /* | |
776 | * vpfe_poll: It is used for select/poll system call | |
777 | */ | |
778 | static unsigned int vpfe_poll(struct file *file, poll_table *wait) | |
779 | { | |
780 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
781 | ||
782 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n"); | |
783 | ||
784 | if (vpfe_dev->started) | |
785 | return videobuf_poll_stream(file, | |
786 | &vpfe_dev->buffer_queue, wait); | |
787 | return 0; | |
788 | } | |
789 | ||
790 | /* vpfe capture driver file operations */ | |
791 | static const struct v4l2_file_operations vpfe_fops = { | |
792 | .owner = THIS_MODULE, | |
793 | .open = vpfe_open, | |
794 | .release = vpfe_release, | |
795 | .unlocked_ioctl = video_ioctl2, | |
796 | .mmap = vpfe_mmap, | |
797 | .poll = vpfe_poll | |
798 | }; | |
799 | ||
800 | /* | |
801 | * vpfe_check_format() | |
802 | * This function adjust the input pixel format as per hardware | |
803 | * capabilities and update the same in pixfmt. | |
804 | * Following algorithm used :- | |
805 | * | |
806 | * If given pixformat is not in the vpfe list of pix formats or not | |
807 | * supported by the hardware, current value of pixformat in the device | |
808 | * is used | |
809 | * If given field is not supported, then current field is used. If field | |
810 | * is different from current, then it is matched with that from sub device. | |
811 | * Minimum height is 2 lines for interlaced or tb field and 1 line for | |
812 | * progressive. Maximum height is clamped to active active lines of scan | |
813 | * Minimum width is 32 bytes in memory and width is clamped to active | |
814 | * pixels of scan. | |
815 | * bytesperline is a multiple of 32. | |
816 | */ | |
817 | static const struct vpfe_pixel_format * | |
818 | vpfe_check_format(struct vpfe_device *vpfe_dev, | |
819 | struct v4l2_pix_format *pixfmt) | |
820 | { | |
821 | u32 min_height = 1, min_width = 32, max_width, max_height; | |
822 | const struct vpfe_pixel_format *vpfe_pix_fmt; | |
823 | u32 pix; | |
824 | int temp, found; | |
825 | ||
826 | vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); | |
827 | if (NULL == vpfe_pix_fmt) { | |
828 | /* | |
829 | * use current pixel format in the vpfe device. We | |
830 | * will find this pix format in the table | |
831 | */ | |
832 | pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; | |
833 | vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); | |
834 | } | |
835 | ||
836 | /* check if hw supports it */ | |
837 | temp = 0; | |
838 | found = 0; | |
839 | while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) { | |
840 | if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) { | |
841 | found = 1; | |
842 | break; | |
843 | } | |
844 | temp++; | |
845 | } | |
846 | ||
847 | if (!found) { | |
848 | /* use current pixel format */ | |
849 | pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; | |
850 | /* | |
851 | * Since this is currently used in the vpfe device, we | |
852 | * will find this pix format in the table | |
853 | */ | |
854 | vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); | |
855 | } | |
856 | ||
857 | /* check what field format is supported */ | |
858 | if (pixfmt->field == V4L2_FIELD_ANY) { | |
859 | /* if field is any, use current value as default */ | |
860 | pixfmt->field = vpfe_dev->fmt.fmt.pix.field; | |
861 | } | |
862 | ||
863 | /* | |
864 | * if field is not same as current field in the vpfe device | |
865 | * try matching the field with the sub device field | |
866 | */ | |
867 | if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) { | |
868 | /* | |
869 | * If field value is not in the supported fields, use current | |
870 | * field used in the device as default | |
871 | */ | |
872 | switch (pixfmt->field) { | |
873 | case V4L2_FIELD_INTERLACED: | |
874 | case V4L2_FIELD_SEQ_TB: | |
875 | /* if sub device is supporting progressive, use that */ | |
876 | if (!vpfe_dev->std_info.frame_format) | |
877 | pixfmt->field = V4L2_FIELD_NONE; | |
878 | break; | |
879 | case V4L2_FIELD_NONE: | |
880 | if (vpfe_dev->std_info.frame_format) | |
881 | pixfmt->field = V4L2_FIELD_INTERLACED; | |
882 | break; | |
883 | ||
884 | default: | |
885 | /* use current field as default */ | |
886 | pixfmt->field = vpfe_dev->fmt.fmt.pix.field; | |
887 | break; | |
888 | } | |
889 | } | |
890 | ||
891 | /* Now adjust image resolutions supported */ | |
892 | if (pixfmt->field == V4L2_FIELD_INTERLACED || | |
893 | pixfmt->field == V4L2_FIELD_SEQ_TB) | |
894 | min_height = 2; | |
895 | ||
896 | max_width = vpfe_dev->std_info.active_pixels; | |
897 | max_height = vpfe_dev->std_info.active_lines; | |
898 | min_width /= vpfe_pix_fmt->bpp; | |
899 | ||
900 | v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n", | |
901 | pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp); | |
902 | ||
903 | pixfmt->width = clamp((pixfmt->width), min_width, max_width); | |
904 | pixfmt->height = clamp((pixfmt->height), min_height, max_height); | |
905 | ||
906 | /* If interlaced, adjust height to be a multiple of 2 */ | |
907 | if (pixfmt->field == V4L2_FIELD_INTERLACED) | |
908 | pixfmt->height &= (~1); | |
909 | /* | |
910 | * recalculate bytesperline and sizeimage since width | |
911 | * and height might have changed | |
912 | */ | |
913 | pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31) | |
914 | & ~31); | |
915 | if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) | |
916 | pixfmt->sizeimage = | |
917 | pixfmt->bytesperline * pixfmt->height + | |
918 | ((pixfmt->bytesperline * pixfmt->height) >> 1); | |
919 | else | |
920 | pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; | |
921 | ||
922 | v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height =" | |
923 | " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n", | |
924 | pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp, | |
925 | pixfmt->bytesperline, pixfmt->sizeimage); | |
926 | return vpfe_pix_fmt; | |
927 | } | |
928 | ||
929 | static int vpfe_querycap(struct file *file, void *priv, | |
930 | struct v4l2_capability *cap) | |
931 | { | |
932 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
933 | ||
934 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n"); | |
935 | ||
8c17e5e3 HV |
936 | cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; |
937 | cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; | |
7da8a6cb MK |
938 | strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); |
939 | strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info)); | |
940 | strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card)); | |
941 | return 0; | |
942 | } | |
943 | ||
944 | static int vpfe_g_fmt_vid_cap(struct file *file, void *priv, | |
945 | struct v4l2_format *fmt) | |
946 | { | |
947 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
7da8a6cb MK |
948 | |
949 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n"); | |
950 | /* Fill in the information about format */ | |
951 | *fmt = vpfe_dev->fmt; | |
b80cefb4 | 952 | return 0; |
7da8a6cb MK |
953 | } |
954 | ||
955 | static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv, | |
956 | struct v4l2_fmtdesc *fmt) | |
957 | { | |
958 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
959 | const struct vpfe_pixel_format *pix_fmt; | |
960 | int temp_index; | |
961 | u32 pix; | |
962 | ||
963 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n"); | |
964 | ||
965 | if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0) | |
966 | return -EINVAL; | |
967 | ||
968 | /* Fill in the information about format */ | |
969 | pix_fmt = vpfe_lookup_pix_format(pix); | |
970 | if (NULL != pix_fmt) { | |
971 | temp_index = fmt->index; | |
972 | *fmt = pix_fmt->fmtdesc; | |
973 | fmt->index = temp_index; | |
974 | return 0; | |
975 | } | |
976 | return -EINVAL; | |
977 | } | |
978 | ||
979 | static int vpfe_s_fmt_vid_cap(struct file *file, void *priv, | |
980 | struct v4l2_format *fmt) | |
981 | { | |
982 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
983 | const struct vpfe_pixel_format *pix_fmts; | |
984 | int ret = 0; | |
985 | ||
986 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n"); | |
987 | ||
988 | /* If streaming is started, return error */ | |
989 | if (vpfe_dev->started) { | |
990 | v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n"); | |
991 | return -EBUSY; | |
992 | } | |
993 | ||
994 | /* Check for valid frame format */ | |
995 | pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix); | |
996 | ||
997 | if (NULL == pix_fmts) | |
998 | return -EINVAL; | |
999 | ||
1000 | /* store the pixel format in the device object */ | |
1001 | ret = mutex_lock_interruptible(&vpfe_dev->lock); | |
1002 | if (ret) | |
1003 | return ret; | |
1004 | ||
1005 | /* First detach any IRQ if currently attached */ | |
1006 | vpfe_detach_irq(vpfe_dev); | |
1007 | vpfe_dev->fmt = *fmt; | |
1008 | /* set image capture parameters in the ccdc */ | |
1009 | ret = vpfe_config_ccdc_image_format(vpfe_dev); | |
1010 | mutex_unlock(&vpfe_dev->lock); | |
1011 | return ret; | |
1012 | } | |
1013 | ||
1014 | static int vpfe_try_fmt_vid_cap(struct file *file, void *priv, | |
1015 | struct v4l2_format *f) | |
1016 | { | |
1017 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1018 | const struct vpfe_pixel_format *pix_fmts; | |
1019 | ||
1020 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n"); | |
1021 | ||
1022 | pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix); | |
1023 | if (NULL == pix_fmts) | |
1024 | return -EINVAL; | |
1025 | return 0; | |
1026 | } | |
1027 | ||
1028 | /* | |
1029 | * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a | |
1030 | * given app input index | |
1031 | */ | |
1032 | static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev, | |
1033 | int *subdev_index, | |
1034 | int *subdev_input_index, | |
1035 | int app_input_index) | |
1036 | { | |
1037 | struct vpfe_config *cfg = vpfe_dev->cfg; | |
1038 | struct vpfe_subdev_info *sdinfo; | |
1039 | int i, j = 0; | |
1040 | ||
1041 | for (i = 0; i < cfg->num_subdevs; i++) { | |
1042 | sdinfo = &cfg->sub_devs[i]; | |
1043 | if (app_input_index < (j + sdinfo->num_inputs)) { | |
1044 | *subdev_index = i; | |
1045 | *subdev_input_index = app_input_index - j; | |
1046 | return 0; | |
1047 | } | |
1048 | j += sdinfo->num_inputs; | |
1049 | } | |
1050 | return -EINVAL; | |
1051 | } | |
1052 | ||
1053 | /* | |
1054 | * vpfe_get_app_input - Get app input index for a given subdev input index | |
1055 | * driver stores the input index of the current sub device and translate it | |
1056 | * when application request the current input | |
1057 | */ | |
1058 | static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev, | |
1059 | int *app_input_index) | |
1060 | { | |
1061 | struct vpfe_config *cfg = vpfe_dev->cfg; | |
1062 | struct vpfe_subdev_info *sdinfo; | |
1063 | int i, j = 0; | |
1064 | ||
1065 | for (i = 0; i < cfg->num_subdevs; i++) { | |
1066 | sdinfo = &cfg->sub_devs[i]; | |
1067 | if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) { | |
1068 | if (vpfe_dev->current_input >= sdinfo->num_inputs) | |
1069 | return -1; | |
1070 | *app_input_index = j + vpfe_dev->current_input; | |
1071 | return 0; | |
1072 | } | |
1073 | j += sdinfo->num_inputs; | |
1074 | } | |
1075 | return -EINVAL; | |
1076 | } | |
1077 | ||
1078 | static int vpfe_enum_input(struct file *file, void *priv, | |
1079 | struct v4l2_input *inp) | |
1080 | { | |
1081 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1082 | struct vpfe_subdev_info *sdinfo; | |
1083 | int subdev, index ; | |
1084 | ||
1085 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n"); | |
1086 | ||
1087 | if (vpfe_get_subdev_input_index(vpfe_dev, | |
1088 | &subdev, | |
1089 | &index, | |
1090 | inp->index) < 0) { | |
1091 | v4l2_err(&vpfe_dev->v4l2_dev, "input information not found" | |
1092 | " for the subdev\n"); | |
1093 | return -EINVAL; | |
1094 | } | |
1095 | sdinfo = &vpfe_dev->cfg->sub_devs[subdev]; | |
1096 | memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input)); | |
1097 | return 0; | |
1098 | } | |
1099 | ||
1100 | static int vpfe_g_input(struct file *file, void *priv, unsigned int *index) | |
1101 | { | |
1102 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1103 | ||
1104 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n"); | |
1105 | ||
1106 | return vpfe_get_app_input_index(vpfe_dev, index); | |
1107 | } | |
1108 | ||
1109 | ||
1110 | static int vpfe_s_input(struct file *file, void *priv, unsigned int index) | |
1111 | { | |
1112 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
6f55dbae | 1113 | struct v4l2_subdev *sd; |
7da8a6cb MK |
1114 | struct vpfe_subdev_info *sdinfo; |
1115 | int subdev_index, inp_index; | |
1116 | struct vpfe_route *route; | |
1117 | u32 input = 0, output = 0; | |
1118 | int ret = -EINVAL; | |
1119 | ||
1120 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); | |
1121 | ||
1122 | ret = mutex_lock_interruptible(&vpfe_dev->lock); | |
1123 | if (ret) | |
1124 | return ret; | |
1125 | ||
1126 | /* | |
1127 | * If streaming is started return device busy | |
1128 | * error | |
1129 | */ | |
1130 | if (vpfe_dev->started) { | |
1131 | v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n"); | |
1132 | ret = -EBUSY; | |
1133 | goto unlock_out; | |
1134 | } | |
9a888ba2 PST |
1135 | ret = vpfe_get_subdev_input_index(vpfe_dev, |
1136 | &subdev_index, | |
1137 | &inp_index, | |
1138 | index); | |
1139 | if (ret < 0) { | |
7da8a6cb MK |
1140 | v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n"); |
1141 | goto unlock_out; | |
1142 | } | |
1143 | ||
1144 | sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index]; | |
6f55dbae | 1145 | sd = vpfe_dev->sd[subdev_index]; |
7da8a6cb MK |
1146 | route = &sdinfo->routes[inp_index]; |
1147 | if (route && sdinfo->can_route) { | |
1148 | input = route->input; | |
1149 | output = route->output; | |
1150 | } | |
1151 | ||
6f55dbae HV |
1152 | if (sd) |
1153 | ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0); | |
7da8a6cb MK |
1154 | |
1155 | if (ret) { | |
1156 | v4l2_err(&vpfe_dev->v4l2_dev, | |
1157 | "vpfe_doioctl:error in setting input in decoder\n"); | |
1158 | ret = -EINVAL; | |
1159 | goto unlock_out; | |
1160 | } | |
1161 | vpfe_dev->current_subdev = sdinfo; | |
6f55dbae HV |
1162 | if (sd) |
1163 | vpfe_dev->v4l2_dev.ctrl_handler = sd->ctrl_handler; | |
7da8a6cb MK |
1164 | vpfe_dev->current_input = index; |
1165 | vpfe_dev->std_index = 0; | |
1166 | ||
1167 | /* set the bus/interface parameter for the sub device in ccdc */ | |
1168 | ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params); | |
1169 | if (ret) | |
1170 | goto unlock_out; | |
1171 | ||
1172 | /* set the default image parameters in the device */ | |
1173 | ret = vpfe_config_image_format(vpfe_dev, | |
314527ac | 1174 | vpfe_standards[vpfe_dev->std_index].std_id); |
7da8a6cb MK |
1175 | unlock_out: |
1176 | mutex_unlock(&vpfe_dev->lock); | |
1177 | return ret; | |
1178 | } | |
1179 | ||
1180 | static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id) | |
1181 | { | |
1182 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1183 | struct vpfe_subdev_info *sdinfo; | |
1184 | int ret = 0; | |
1185 | ||
1186 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n"); | |
1187 | ||
1188 | ret = mutex_lock_interruptible(&vpfe_dev->lock); | |
1189 | sdinfo = vpfe_dev->current_subdev; | |
1190 | if (ret) | |
1191 | return ret; | |
1192 | /* Call querystd function of decoder device */ | |
1193 | ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, | |
1194 | video, querystd, std_id); | |
1195 | mutex_unlock(&vpfe_dev->lock); | |
1196 | return ret; | |
1197 | } | |
1198 | ||
314527ac | 1199 | static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id) |
7da8a6cb MK |
1200 | { |
1201 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1202 | struct vpfe_subdev_info *sdinfo; | |
1203 | int ret = 0; | |
1204 | ||
1205 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n"); | |
1206 | ||
1207 | /* Call decoder driver function to set the standard */ | |
1208 | ret = mutex_lock_interruptible(&vpfe_dev->lock); | |
1209 | if (ret) | |
1210 | return ret; | |
1211 | ||
1212 | sdinfo = vpfe_dev->current_subdev; | |
1213 | /* If streaming is started, return device busy error */ | |
1214 | if (vpfe_dev->started) { | |
1215 | v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n"); | |
1216 | ret = -EBUSY; | |
1217 | goto unlock_out; | |
1218 | } | |
1219 | ||
1220 | ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, | |
8774bed9 | 1221 | video, s_std, std_id); |
7da8a6cb MK |
1222 | if (ret < 0) { |
1223 | v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n"); | |
1224 | goto unlock_out; | |
1225 | } | |
1226 | ret = vpfe_config_image_format(vpfe_dev, std_id); | |
1227 | ||
1228 | unlock_out: | |
1229 | mutex_unlock(&vpfe_dev->lock); | |
1230 | return ret; | |
1231 | } | |
1232 | ||
1233 | static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id) | |
1234 | { | |
1235 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1236 | ||
1237 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n"); | |
1238 | ||
1239 | *std_id = vpfe_standards[vpfe_dev->std_index].std_id; | |
1240 | return 0; | |
1241 | } | |
1242 | /* | |
1243 | * Videobuf operations | |
1244 | */ | |
1245 | static int vpfe_videobuf_setup(struct videobuf_queue *vq, | |
1246 | unsigned int *count, | |
1247 | unsigned int *size) | |
1248 | { | |
1249 | struct vpfe_fh *fh = vq->priv_data; | |
1250 | struct vpfe_device *vpfe_dev = fh->vpfe_dev; | |
1251 | ||
1252 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n"); | |
844cc0dc VH |
1253 | *size = vpfe_dev->fmt.fmt.pix.sizeimage; |
1254 | if (vpfe_dev->memory == V4L2_MEMORY_MMAP && | |
1255 | vpfe_dev->fmt.fmt.pix.sizeimage > config_params.device_bufsize) | |
1256 | *size = config_params.device_bufsize; | |
7da8a6cb MK |
1257 | |
1258 | if (*count < config_params.min_numbuffers) | |
1259 | *count = config_params.min_numbuffers; | |
1260 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, | |
1261 | "count=%d, size=%d\n", *count, *size); | |
1262 | return 0; | |
1263 | } | |
1264 | ||
1265 | static int vpfe_videobuf_prepare(struct videobuf_queue *vq, | |
1266 | struct videobuf_buffer *vb, | |
1267 | enum v4l2_field field) | |
1268 | { | |
1269 | struct vpfe_fh *fh = vq->priv_data; | |
1270 | struct vpfe_device *vpfe_dev = fh->vpfe_dev; | |
844cc0dc VH |
1271 | unsigned long addr; |
1272 | int ret; | |
7da8a6cb MK |
1273 | |
1274 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n"); | |
1275 | ||
1276 | /* If buffer is not initialized, initialize it */ | |
1277 | if (VIDEOBUF_NEEDS_INIT == vb->state) { | |
1278 | vb->width = vpfe_dev->fmt.fmt.pix.width; | |
1279 | vb->height = vpfe_dev->fmt.fmt.pix.height; | |
1280 | vb->size = vpfe_dev->fmt.fmt.pix.sizeimage; | |
1281 | vb->field = field; | |
844cc0dc | 1282 | |
b1dc614a | 1283 | ret = videobuf_iolock(vq, vb, NULL); |
844cc0dc VH |
1284 | if (ret < 0) |
1285 | return ret; | |
1286 | ||
1287 | addr = videobuf_to_dma_contig(vb); | |
1288 | /* Make sure user addresses are aligned to 32 bytes */ | |
1289 | if (!ALIGN(addr, 32)) | |
1290 | return -EINVAL; | |
1291 | ||
1292 | vb->state = VIDEOBUF_PREPARED; | |
7da8a6cb | 1293 | } |
7da8a6cb MK |
1294 | return 0; |
1295 | } | |
1296 | ||
1297 | static void vpfe_videobuf_queue(struct videobuf_queue *vq, | |
1298 | struct videobuf_buffer *vb) | |
1299 | { | |
1300 | /* Get the file handle object and device object */ | |
1301 | struct vpfe_fh *fh = vq->priv_data; | |
1302 | struct vpfe_device *vpfe_dev = fh->vpfe_dev; | |
1303 | unsigned long flags; | |
1304 | ||
1305 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n"); | |
1306 | ||
1307 | /* add the buffer to the DMA queue */ | |
1308 | spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); | |
1309 | list_add_tail(&vb->queue, &vpfe_dev->dma_queue); | |
1310 | spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); | |
1311 | ||
1312 | /* Change state of the buffer */ | |
1313 | vb->state = VIDEOBUF_QUEUED; | |
1314 | } | |
1315 | ||
1316 | static void vpfe_videobuf_release(struct videobuf_queue *vq, | |
1317 | struct videobuf_buffer *vb) | |
1318 | { | |
1319 | struct vpfe_fh *fh = vq->priv_data; | |
1320 | struct vpfe_device *vpfe_dev = fh->vpfe_dev; | |
1321 | unsigned long flags; | |
1322 | ||
1323 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n"); | |
1324 | ||
1325 | /* | |
1326 | * We need to flush the buffer from the dma queue since | |
1327 | * they are de-allocated | |
1328 | */ | |
1329 | spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); | |
1330 | INIT_LIST_HEAD(&vpfe_dev->dma_queue); | |
1331 | spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); | |
1332 | videobuf_dma_contig_free(vq, vb); | |
1333 | vb->state = VIDEOBUF_NEEDS_INIT; | |
1334 | } | |
1335 | ||
1336 | static struct videobuf_queue_ops vpfe_videobuf_qops = { | |
1337 | .buf_setup = vpfe_videobuf_setup, | |
1338 | .buf_prepare = vpfe_videobuf_prepare, | |
1339 | .buf_queue = vpfe_videobuf_queue, | |
1340 | .buf_release = vpfe_videobuf_release, | |
1341 | }; | |
1342 | ||
1343 | /* | |
1344 | * vpfe_reqbufs. currently support REQBUF only once opening | |
1345 | * the device. | |
1346 | */ | |
1347 | static int vpfe_reqbufs(struct file *file, void *priv, | |
1348 | struct v4l2_requestbuffers *req_buf) | |
1349 | { | |
1350 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1351 | struct vpfe_fh *fh = file->private_data; | |
1352 | int ret = 0; | |
1353 | ||
1354 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n"); | |
1355 | ||
1356 | if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) { | |
1357 | v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n"); | |
1358 | return -EINVAL; | |
1359 | } | |
1360 | ||
7da8a6cb MK |
1361 | ret = mutex_lock_interruptible(&vpfe_dev->lock); |
1362 | if (ret) | |
1363 | return ret; | |
1364 | ||
1365 | if (vpfe_dev->io_usrs != 0) { | |
1366 | v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n"); | |
1367 | ret = -EBUSY; | |
1368 | goto unlock_out; | |
1369 | } | |
1370 | ||
1371 | vpfe_dev->memory = req_buf->memory; | |
1372 | videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue, | |
1373 | &vpfe_videobuf_qops, | |
204e6ea9 | 1374 | vpfe_dev->pdev, |
7da8a6cb MK |
1375 | &vpfe_dev->irqlock, |
1376 | req_buf->type, | |
1377 | vpfe_dev->fmt.fmt.pix.field, | |
1378 | sizeof(struct videobuf_buffer), | |
e3cfd447 | 1379 | fh, NULL); |
7da8a6cb MK |
1380 | |
1381 | fh->io_allowed = 1; | |
1382 | vpfe_dev->io_usrs = 1; | |
1383 | INIT_LIST_HEAD(&vpfe_dev->dma_queue); | |
1384 | ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf); | |
1385 | unlock_out: | |
1386 | mutex_unlock(&vpfe_dev->lock); | |
1387 | return ret; | |
1388 | } | |
1389 | ||
1390 | static int vpfe_querybuf(struct file *file, void *priv, | |
1391 | struct v4l2_buffer *buf) | |
1392 | { | |
1393 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1394 | ||
1395 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n"); | |
1396 | ||
1397 | if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { | |
1398 | v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); | |
1399 | return -EINVAL; | |
1400 | } | |
1401 | ||
1402 | if (vpfe_dev->memory != V4L2_MEMORY_MMAP) { | |
1403 | v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n"); | |
1404 | return -EINVAL; | |
1405 | } | |
1406 | /* Call videobuf_querybuf to get information */ | |
1407 | return videobuf_querybuf(&vpfe_dev->buffer_queue, buf); | |
1408 | } | |
1409 | ||
1410 | static int vpfe_qbuf(struct file *file, void *priv, | |
1411 | struct v4l2_buffer *p) | |
1412 | { | |
1413 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1414 | struct vpfe_fh *fh = file->private_data; | |
1415 | ||
1416 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n"); | |
1417 | ||
1418 | if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) { | |
1419 | v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); | |
1420 | return -EINVAL; | |
1421 | } | |
1422 | ||
1423 | /* | |
1424 | * If this file handle is not allowed to do IO, | |
1425 | * return error | |
1426 | */ | |
1427 | if (!fh->io_allowed) { | |
1428 | v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); | |
1429 | return -EACCES; | |
1430 | } | |
1431 | return videobuf_qbuf(&vpfe_dev->buffer_queue, p); | |
1432 | } | |
1433 | ||
1434 | static int vpfe_dqbuf(struct file *file, void *priv, | |
1435 | struct v4l2_buffer *buf) | |
1436 | { | |
1437 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1438 | ||
1439 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n"); | |
1440 | ||
1441 | if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { | |
1442 | v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); | |
1443 | return -EINVAL; | |
1444 | } | |
1445 | return videobuf_dqbuf(&vpfe_dev->buffer_queue, | |
1446 | buf, file->f_flags & O_NONBLOCK); | |
1447 | } | |
1448 | ||
1449 | /* | |
1450 | * vpfe_calculate_offsets : This function calculates buffers offset | |
1451 | * for top and bottom field | |
1452 | */ | |
1453 | static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev) | |
1454 | { | |
1455 | struct v4l2_rect image_win; | |
1456 | ||
1457 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n"); | |
1458 | ||
1459 | ccdc_dev->hw_ops.get_image_window(&image_win); | |
1460 | vpfe_dev->field_off = image_win.height * image_win.width; | |
1461 | } | |
1462 | ||
1463 | /* vpfe_start_ccdc_capture: start streaming in ccdc/isif */ | |
1464 | static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev) | |
1465 | { | |
1466 | ccdc_dev->hw_ops.enable(1); | |
1467 | if (ccdc_dev->hw_ops.enable_out_to_sdram) | |
1468 | ccdc_dev->hw_ops.enable_out_to_sdram(1); | |
1469 | vpfe_dev->started = 1; | |
1470 | } | |
1471 | ||
1472 | /* | |
1473 | * vpfe_streamon. Assume the DMA queue is not empty. | |
1474 | * application is expected to call QBUF before calling | |
1475 | * this ioctl. If not, driver returns error | |
1476 | */ | |
1477 | static int vpfe_streamon(struct file *file, void *priv, | |
1478 | enum v4l2_buf_type buf_type) | |
1479 | { | |
1480 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1481 | struct vpfe_fh *fh = file->private_data; | |
1482 | struct vpfe_subdev_info *sdinfo; | |
1483 | unsigned long addr; | |
1484 | int ret = 0; | |
1485 | ||
1486 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n"); | |
1487 | ||
1488 | if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { | |
1489 | v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); | |
1490 | return -EINVAL; | |
1491 | } | |
1492 | ||
1493 | /* If file handle is not allowed IO, return error */ | |
1494 | if (!fh->io_allowed) { | |
1495 | v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); | |
1496 | return -EACCES; | |
1497 | } | |
1498 | ||
1499 | sdinfo = vpfe_dev->current_subdev; | |
1500 | ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, | |
1501 | video, s_stream, 1); | |
1502 | ||
1503 | if (ret && (ret != -ENOIOCTLCMD)) { | |
1504 | v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n"); | |
1505 | return -EINVAL; | |
1506 | } | |
1507 | ||
1508 | /* If buffer queue is empty, return error */ | |
1509 | if (list_empty(&vpfe_dev->buffer_queue.stream)) { | |
1510 | v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n"); | |
1511 | return -EIO; | |
1512 | } | |
1513 | ||
1514 | /* Call videobuf_streamon to start streaming * in videobuf */ | |
1515 | ret = videobuf_streamon(&vpfe_dev->buffer_queue); | |
1516 | if (ret) | |
1517 | return ret; | |
1518 | ||
1519 | ||
1520 | ret = mutex_lock_interruptible(&vpfe_dev->lock); | |
1521 | if (ret) | |
1522 | goto streamoff; | |
1523 | /* Get the next frame from the buffer queue */ | |
1524 | vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, | |
1525 | struct videobuf_buffer, queue); | |
1526 | vpfe_dev->cur_frm = vpfe_dev->next_frm; | |
1527 | /* Remove buffer from the buffer queue */ | |
1528 | list_del(&vpfe_dev->cur_frm->queue); | |
1529 | /* Mark state of the current frame to active */ | |
1530 | vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE; | |
1531 | /* Initialize field_id and started member */ | |
1532 | vpfe_dev->field_id = 0; | |
1533 | addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); | |
1534 | ||
1535 | /* Calculate field offset */ | |
1536 | vpfe_calculate_offsets(vpfe_dev); | |
1537 | ||
1538 | if (vpfe_attach_irq(vpfe_dev) < 0) { | |
1539 | v4l2_err(&vpfe_dev->v4l2_dev, | |
1540 | "Error in attaching interrupt handle\n"); | |
1541 | ret = -EFAULT; | |
1542 | goto unlock_out; | |
1543 | } | |
1544 | if (ccdc_dev->hw_ops.configure() < 0) { | |
1545 | v4l2_err(&vpfe_dev->v4l2_dev, | |
1546 | "Error in configuring ccdc\n"); | |
1547 | ret = -EINVAL; | |
1548 | goto unlock_out; | |
1549 | } | |
1550 | ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr)); | |
1551 | vpfe_start_ccdc_capture(vpfe_dev); | |
1552 | mutex_unlock(&vpfe_dev->lock); | |
1553 | return ret; | |
1554 | unlock_out: | |
1555 | mutex_unlock(&vpfe_dev->lock); | |
1556 | streamoff: | |
1557 | ret = videobuf_streamoff(&vpfe_dev->buffer_queue); | |
1558 | return ret; | |
1559 | } | |
1560 | ||
1561 | static int vpfe_streamoff(struct file *file, void *priv, | |
1562 | enum v4l2_buf_type buf_type) | |
1563 | { | |
1564 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1565 | struct vpfe_fh *fh = file->private_data; | |
1566 | struct vpfe_subdev_info *sdinfo; | |
1567 | int ret = 0; | |
1568 | ||
1569 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n"); | |
1570 | ||
1571 | if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { | |
1572 | v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); | |
1573 | return -EINVAL; | |
1574 | } | |
1575 | ||
1576 | /* If io is allowed for this file handle, return error */ | |
1577 | if (!fh->io_allowed) { | |
1578 | v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); | |
1579 | return -EACCES; | |
1580 | } | |
1581 | ||
1582 | /* If streaming is not started, return error */ | |
1583 | if (!vpfe_dev->started) { | |
1584 | v4l2_err(&vpfe_dev->v4l2_dev, "device started\n"); | |
1585 | return -EINVAL; | |
1586 | } | |
1587 | ||
1588 | ret = mutex_lock_interruptible(&vpfe_dev->lock); | |
1589 | if (ret) | |
1590 | return ret; | |
1591 | ||
1592 | vpfe_stop_ccdc_capture(vpfe_dev); | |
1593 | vpfe_detach_irq(vpfe_dev); | |
1594 | ||
1595 | sdinfo = vpfe_dev->current_subdev; | |
1596 | ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, | |
1597 | video, s_stream, 0); | |
1598 | ||
1599 | if (ret && (ret != -ENOIOCTLCMD)) | |
1600 | v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n"); | |
1601 | ret = videobuf_streamoff(&vpfe_dev->buffer_queue); | |
1602 | mutex_unlock(&vpfe_dev->lock); | |
1603 | return ret; | |
1604 | } | |
1605 | ||
1606 | static int vpfe_cropcap(struct file *file, void *priv, | |
1607 | struct v4l2_cropcap *crop) | |
1608 | { | |
1609 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1610 | ||
1611 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n"); | |
1612 | ||
0b66cf90 | 1613 | if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards)) |
7da8a6cb MK |
1614 | return -EINVAL; |
1615 | ||
1616 | memset(crop, 0, sizeof(struct v4l2_cropcap)); | |
1617 | crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; | |
1618 | crop->bounds.width = crop->defrect.width = | |
1619 | vpfe_standards[vpfe_dev->std_index].width; | |
1620 | crop->bounds.height = crop->defrect.height = | |
1621 | vpfe_standards[vpfe_dev->std_index].height; | |
1622 | crop->pixelaspect = vpfe_standards[vpfe_dev->std_index].pixelaspect; | |
1623 | return 0; | |
1624 | } | |
1625 | ||
1626 | static int vpfe_g_crop(struct file *file, void *priv, | |
1627 | struct v4l2_crop *crop) | |
1628 | { | |
1629 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1630 | ||
1631 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_crop\n"); | |
1632 | ||
1633 | crop->c = vpfe_dev->crop; | |
1634 | return 0; | |
1635 | } | |
1636 | ||
1637 | static int vpfe_s_crop(struct file *file, void *priv, | |
4f996594 | 1638 | const struct v4l2_crop *crop) |
7da8a6cb MK |
1639 | { |
1640 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
8b6faacd | 1641 | struct v4l2_rect rect = crop->c; |
7da8a6cb MK |
1642 | int ret = 0; |
1643 | ||
1644 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_crop\n"); | |
1645 | ||
1646 | if (vpfe_dev->started) { | |
1647 | /* make sure streaming is not started */ | |
1648 | v4l2_err(&vpfe_dev->v4l2_dev, | |
1649 | "Cannot change crop when streaming is ON\n"); | |
1650 | return -EBUSY; | |
1651 | } | |
1652 | ||
1653 | ret = mutex_lock_interruptible(&vpfe_dev->lock); | |
1654 | if (ret) | |
1655 | return ret; | |
1656 | ||
8b6faacd | 1657 | if (rect.top < 0 || rect.left < 0) { |
7da8a6cb MK |
1658 | v4l2_err(&vpfe_dev->v4l2_dev, |
1659 | "doesn't support negative values for top & left\n"); | |
1660 | ret = -EINVAL; | |
1661 | goto unlock_out; | |
1662 | } | |
1663 | ||
25985edc | 1664 | /* adjust the width to 16 pixel boundary */ |
8b6faacd | 1665 | rect.width = ((rect.width + 15) & ~0xf); |
7da8a6cb MK |
1666 | |
1667 | /* make sure parameters are valid */ | |
8b6faacd | 1668 | if ((rect.left + rect.width > |
7da8a6cb | 1669 | vpfe_dev->std_info.active_pixels) || |
8b6faacd | 1670 | (rect.top + rect.height > |
7da8a6cb MK |
1671 | vpfe_dev->std_info.active_lines)) { |
1672 | v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_CROP params\n"); | |
1673 | ret = -EINVAL; | |
1674 | goto unlock_out; | |
1675 | } | |
8b6faacd LP |
1676 | ccdc_dev->hw_ops.set_image_window(&rect); |
1677 | vpfe_dev->fmt.fmt.pix.width = rect.width; | |
1678 | vpfe_dev->fmt.fmt.pix.height = rect.height; | |
7da8a6cb MK |
1679 | vpfe_dev->fmt.fmt.pix.bytesperline = |
1680 | ccdc_dev->hw_ops.get_line_length(); | |
1681 | vpfe_dev->fmt.fmt.pix.sizeimage = | |
1682 | vpfe_dev->fmt.fmt.pix.bytesperline * | |
1683 | vpfe_dev->fmt.fmt.pix.height; | |
8b6faacd | 1684 | vpfe_dev->crop = rect; |
7da8a6cb MK |
1685 | unlock_out: |
1686 | mutex_unlock(&vpfe_dev->lock); | |
1687 | return ret; | |
1688 | } | |
1689 | ||
1690 | ||
1691 | static long vpfe_param_handler(struct file *file, void *priv, | |
6d43be77 | 1692 | bool valid_prio, unsigned int cmd, void *param) |
7da8a6cb MK |
1693 | { |
1694 | struct vpfe_device *vpfe_dev = video_drvdata(file); | |
1695 | int ret = 0; | |
1696 | ||
6a4f0623 | 1697 | v4l2_dbg(2, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n"); |
7da8a6cb MK |
1698 | |
1699 | if (vpfe_dev->started) { | |
1700 | /* only allowed if streaming is not started */ | |
6a4f0623 MK |
1701 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, |
1702 | "device already started\n"); | |
7da8a6cb MK |
1703 | return -EBUSY; |
1704 | } | |
1705 | ||
1706 | ret = mutex_lock_interruptible(&vpfe_dev->lock); | |
1707 | if (ret) | |
1708 | return ret; | |
1709 | ||
1710 | switch (cmd) { | |
1711 | case VPFE_CMD_S_CCDC_RAW_PARAMS: | |
1712 | v4l2_warn(&vpfe_dev->v4l2_dev, | |
1713 | "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n"); | |
6a4f0623 MK |
1714 | if (ccdc_dev->hw_ops.set_params) { |
1715 | ret = ccdc_dev->hw_ops.set_params(param); | |
1716 | if (ret) { | |
1717 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, | |
1718 | "Error setting parameters in CCDC\n"); | |
1719 | goto unlock_out; | |
1720 | } | |
9a888ba2 PST |
1721 | ret = vpfe_get_ccdc_image_format(vpfe_dev, |
1722 | &vpfe_dev->fmt); | |
1723 | if (ret < 0) { | |
6a4f0623 MK |
1724 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, |
1725 | "Invalid image format at CCDC\n"); | |
1726 | goto unlock_out; | |
1727 | } | |
1728 | } else { | |
1729 | ret = -EINVAL; | |
1730 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, | |
1731 | "VPFE_CMD_S_CCDC_RAW_PARAMS not supported\n"); | |
7da8a6cb MK |
1732 | } |
1733 | break; | |
1734 | default: | |
d1c754a9 | 1735 | ret = -ENOTTY; |
7da8a6cb MK |
1736 | } |
1737 | unlock_out: | |
1738 | mutex_unlock(&vpfe_dev->lock); | |
1739 | return ret; | |
1740 | } | |
1741 | ||
1742 | ||
1743 | /* vpfe capture ioctl operations */ | |
1744 | static const struct v4l2_ioctl_ops vpfe_ioctl_ops = { | |
1745 | .vidioc_querycap = vpfe_querycap, | |
1746 | .vidioc_g_fmt_vid_cap = vpfe_g_fmt_vid_cap, | |
1747 | .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap, | |
1748 | .vidioc_s_fmt_vid_cap = vpfe_s_fmt_vid_cap, | |
1749 | .vidioc_try_fmt_vid_cap = vpfe_try_fmt_vid_cap, | |
1750 | .vidioc_enum_input = vpfe_enum_input, | |
1751 | .vidioc_g_input = vpfe_g_input, | |
1752 | .vidioc_s_input = vpfe_s_input, | |
1753 | .vidioc_querystd = vpfe_querystd, | |
1754 | .vidioc_s_std = vpfe_s_std, | |
1755 | .vidioc_g_std = vpfe_g_std, | |
1756 | .vidioc_reqbufs = vpfe_reqbufs, | |
1757 | .vidioc_querybuf = vpfe_querybuf, | |
1758 | .vidioc_qbuf = vpfe_qbuf, | |
1759 | .vidioc_dqbuf = vpfe_dqbuf, | |
1760 | .vidioc_streamon = vpfe_streamon, | |
1761 | .vidioc_streamoff = vpfe_streamoff, | |
1762 | .vidioc_cropcap = vpfe_cropcap, | |
1763 | .vidioc_g_crop = vpfe_g_crop, | |
1764 | .vidioc_s_crop = vpfe_s_crop, | |
1765 | .vidioc_default = vpfe_param_handler, | |
1766 | }; | |
1767 | ||
1768 | static struct vpfe_device *vpfe_initialize(void) | |
1769 | { | |
1770 | struct vpfe_device *vpfe_dev; | |
1771 | ||
1772 | /* Default number of buffers should be 3 */ | |
1773 | if ((numbuffers > 0) && | |
1774 | (numbuffers < config_params.min_numbuffers)) | |
1775 | numbuffers = config_params.min_numbuffers; | |
1776 | ||
1777 | /* | |
1778 | * Set buffer size to min buffers size if invalid buffer size is | |
1779 | * given | |
1780 | */ | |
1781 | if (bufsize < config_params.min_bufsize) | |
1782 | bufsize = config_params.min_bufsize; | |
1783 | ||
1784 | config_params.numbuffers = numbuffers; | |
1785 | ||
1786 | if (numbuffers) | |
1787 | config_params.device_bufsize = bufsize; | |
1788 | ||
1789 | /* Allocate memory for device objects */ | |
1790 | vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL); | |
1791 | ||
1792 | return vpfe_dev; | |
1793 | } | |
1794 | ||
7da8a6cb MK |
1795 | /* |
1796 | * vpfe_probe : This function creates device entries by register | |
1797 | * itself to the V4L2 driver and initializes fields of each | |
1798 | * device objects | |
1799 | */ | |
4c62e976 | 1800 | static int vpfe_probe(struct platform_device *pdev) |
7da8a6cb MK |
1801 | { |
1802 | struct vpfe_subdev_info *sdinfo; | |
1803 | struct vpfe_config *vpfe_cfg; | |
1804 | struct resource *res1; | |
1805 | struct vpfe_device *vpfe_dev; | |
1806 | struct i2c_adapter *i2c_adap; | |
1807 | struct video_device *vfd; | |
1808 | int ret = -ENOMEM, i, j; | |
1809 | int num_subdevs = 0; | |
1810 | ||
1811 | /* Get the pointer to the device object */ | |
1812 | vpfe_dev = vpfe_initialize(); | |
1813 | ||
1814 | if (!vpfe_dev) { | |
1815 | v4l2_err(pdev->dev.driver, | |
1816 | "Failed to allocate memory for vpfe_dev\n"); | |
1817 | return ret; | |
1818 | } | |
1819 | ||
1820 | vpfe_dev->pdev = &pdev->dev; | |
1821 | ||
1822 | if (NULL == pdev->dev.platform_data) { | |
1823 | v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n"); | |
51444ea3 | 1824 | ret = -ENODEV; |
7da8a6cb MK |
1825 | goto probe_free_dev_mem; |
1826 | } | |
1827 | ||
1828 | vpfe_cfg = pdev->dev.platform_data; | |
1829 | vpfe_dev->cfg = vpfe_cfg; | |
1830 | if (NULL == vpfe_cfg->ccdc || | |
1831 | NULL == vpfe_cfg->card_name || | |
1832 | NULL == vpfe_cfg->sub_devs) { | |
1833 | v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n"); | |
1834 | ret = -ENOENT; | |
1835 | goto probe_free_dev_mem; | |
1836 | } | |
1837 | ||
7da8a6cb MK |
1838 | /* Allocate memory for ccdc configuration */ |
1839 | ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL); | |
1840 | if (NULL == ccdc_cfg) { | |
1841 | v4l2_err(pdev->dev.driver, | |
1842 | "Memory allocation failed for ccdc_cfg\n"); | |
39e219d9 | 1843 | goto probe_free_dev_mem; |
7da8a6cb MK |
1844 | } |
1845 | ||
2b080c5d DC |
1846 | mutex_lock(&ccdc_lock); |
1847 | ||
7da8a6cb MK |
1848 | strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32); |
1849 | /* Get VINT0 irq resource */ | |
1850 | res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | |
1851 | if (!res1) { | |
1852 | v4l2_err(pdev->dev.driver, | |
1853 | "Unable to get interrupt for VINT0\n"); | |
51444ea3 MK |
1854 | ret = -ENODEV; |
1855 | goto probe_free_ccdc_cfg_mem; | |
7da8a6cb MK |
1856 | } |
1857 | vpfe_dev->ccdc_irq0 = res1->start; | |
1858 | ||
1859 | /* Get VINT1 irq resource */ | |
51444ea3 | 1860 | res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); |
7da8a6cb MK |
1861 | if (!res1) { |
1862 | v4l2_err(pdev->dev.driver, | |
1863 | "Unable to get interrupt for VINT1\n"); | |
51444ea3 MK |
1864 | ret = -ENODEV; |
1865 | goto probe_free_ccdc_cfg_mem; | |
7da8a6cb MK |
1866 | } |
1867 | vpfe_dev->ccdc_irq1 = res1->start; | |
1868 | ||
d8c279a0 | 1869 | ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, 0, |
7da8a6cb MK |
1870 | "vpfe_capture0", vpfe_dev); |
1871 | ||
1872 | if (0 != ret) { | |
1873 | v4l2_err(pdev->dev.driver, "Unable to request interrupt\n"); | |
51444ea3 | 1874 | goto probe_free_ccdc_cfg_mem; |
7da8a6cb MK |
1875 | } |
1876 | ||
03c278f0 | 1877 | vfd = &vpfe_dev->video_dev; |
7da8a6cb | 1878 | /* Initialize field of video device */ |
03c278f0 | 1879 | vfd->release = video_device_release_empty; |
7da8a6cb MK |
1880 | vfd->fops = &vpfe_fops; |
1881 | vfd->ioctl_ops = &vpfe_ioctl_ops; | |
7da8a6cb | 1882 | vfd->tvnorms = 0; |
7da8a6cb MK |
1883 | vfd->v4l2_dev = &vpfe_dev->v4l2_dev; |
1884 | snprintf(vfd->name, sizeof(vfd->name), | |
1885 | "%s_V%d.%d.%d", | |
1886 | CAPTURE_DRV_NAME, | |
1887 | (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff, | |
1888 | (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff, | |
1889 | (VPFE_CAPTURE_VERSION_CODE) & 0xff); | |
7da8a6cb MK |
1890 | |
1891 | ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev); | |
1892 | if (ret) { | |
1893 | v4l2_err(pdev->dev.driver, | |
1894 | "Unable to register v4l2 device.\n"); | |
03c278f0 | 1895 | goto probe_out_release_irq; |
7da8a6cb MK |
1896 | } |
1897 | v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n"); | |
1898 | spin_lock_init(&vpfe_dev->irqlock); | |
1899 | spin_lock_init(&vpfe_dev->dma_queue_lock); | |
1900 | mutex_init(&vpfe_dev->lock); | |
1901 | ||
1902 | /* Initialize field of the device objects */ | |
1903 | vpfe_dev->numbuffers = config_params.numbuffers; | |
1904 | ||
7da8a6cb MK |
1905 | /* register video device */ |
1906 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, | |
1907 | "trying to register vpfe device.\n"); | |
1908 | v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, | |
212bdba3 | 1909 | "video_dev=%p\n", &vpfe_dev->video_dev); |
7da8a6cb | 1910 | vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
03c278f0 | 1911 | ret = video_register_device(&vpfe_dev->video_dev, |
7da8a6cb MK |
1912 | VFL_TYPE_GRABBER, -1); |
1913 | ||
1914 | if (ret) { | |
1915 | v4l2_err(pdev->dev.driver, | |
1916 | "Unable to register video device.\n"); | |
1917 | goto probe_out_v4l2_unregister; | |
1918 | } | |
1919 | ||
1920 | v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n"); | |
1921 | /* set the driver data in platform device */ | |
1922 | platform_set_drvdata(pdev, vpfe_dev); | |
1923 | /* set driver private data */ | |
03c278f0 | 1924 | video_set_drvdata(&vpfe_dev->video_dev, vpfe_dev); |
14cbaafe | 1925 | i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id); |
7da8a6cb MK |
1926 | num_subdevs = vpfe_cfg->num_subdevs; |
1927 | vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs, | |
1928 | GFP_KERNEL); | |
1929 | if (NULL == vpfe_dev->sd) { | |
1930 | v4l2_err(&vpfe_dev->v4l2_dev, | |
1931 | "unable to allocate memory for subdevice pointers\n"); | |
1932 | ret = -ENOMEM; | |
1933 | goto probe_out_video_unregister; | |
1934 | } | |
1935 | ||
1936 | for (i = 0; i < num_subdevs; i++) { | |
1937 | struct v4l2_input *inps; | |
1938 | ||
1939 | sdinfo = &vpfe_cfg->sub_devs[i]; | |
1940 | ||
1941 | /* Load up the subdevice */ | |
1942 | vpfe_dev->sd[i] = | |
1943 | v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev, | |
1944 | i2c_adap, | |
7da8a6cb MK |
1945 | &sdinfo->board_info, |
1946 | NULL); | |
1947 | if (vpfe_dev->sd[i]) { | |
1948 | v4l2_info(&vpfe_dev->v4l2_dev, | |
1949 | "v4l2 sub device %s registered\n", | |
1950 | sdinfo->name); | |
1951 | vpfe_dev->sd[i]->grp_id = sdinfo->grp_id; | |
1952 | /* update tvnorms from the sub devices */ | |
1953 | for (j = 0; j < sdinfo->num_inputs; j++) { | |
1954 | inps = &sdinfo->inputs[j]; | |
1955 | vfd->tvnorms |= inps->std; | |
1956 | } | |
1957 | } else { | |
1958 | v4l2_info(&vpfe_dev->v4l2_dev, | |
1959 | "v4l2 sub device %s register fails\n", | |
1960 | sdinfo->name); | |
1961 | goto probe_sd_out; | |
1962 | } | |
1963 | } | |
1964 | ||
1965 | /* set first sub device as current one */ | |
1966 | vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0]; | |
6f55dbae | 1967 | vpfe_dev->v4l2_dev.ctrl_handler = vpfe_dev->sd[0]->ctrl_handler; |
7da8a6cb MK |
1968 | |
1969 | /* We have at least one sub device to work with */ | |
1970 | mutex_unlock(&ccdc_lock); | |
1971 | return 0; | |
1972 | ||
1973 | probe_sd_out: | |
1974 | kfree(vpfe_dev->sd); | |
1975 | probe_out_video_unregister: | |
03c278f0 | 1976 | video_unregister_device(&vpfe_dev->video_dev); |
7da8a6cb MK |
1977 | probe_out_v4l2_unregister: |
1978 | v4l2_device_unregister(&vpfe_dev->v4l2_dev); | |
7da8a6cb MK |
1979 | probe_out_release_irq: |
1980 | free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); | |
51444ea3 | 1981 | probe_free_ccdc_cfg_mem: |
7da8a6cb | 1982 | kfree(ccdc_cfg); |
ab51bec1 | 1983 | mutex_unlock(&ccdc_lock); |
7da8a6cb MK |
1984 | probe_free_dev_mem: |
1985 | kfree(vpfe_dev); | |
1986 | return ret; | |
1987 | } | |
1988 | ||
1989 | /* | |
1990 | * vpfe_remove : It un-register device from V4L2 driver | |
1991 | */ | |
4c62e976 | 1992 | static int vpfe_remove(struct platform_device *pdev) |
7da8a6cb MK |
1993 | { |
1994 | struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev); | |
7da8a6cb MK |
1995 | |
1996 | v4l2_info(pdev->dev.driver, "vpfe_remove\n"); | |
1997 | ||
1998 | free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); | |
1999 | kfree(vpfe_dev->sd); | |
2000 | v4l2_device_unregister(&vpfe_dev->v4l2_dev); | |
03c278f0 | 2001 | video_unregister_device(&vpfe_dev->video_dev); |
7da8a6cb MK |
2002 | kfree(vpfe_dev); |
2003 | kfree(ccdc_cfg); | |
2004 | return 0; | |
2005 | } | |
2006 | ||
aa2dc903 | 2007 | static int vpfe_suspend(struct device *dev) |
7da8a6cb | 2008 | { |
aa2dc903 | 2009 | return 0; |
7da8a6cb MK |
2010 | } |
2011 | ||
aa2dc903 | 2012 | static int vpfe_resume(struct device *dev) |
7da8a6cb | 2013 | { |
aa2dc903 | 2014 | return 0; |
7da8a6cb MK |
2015 | } |
2016 | ||
47145210 | 2017 | static const struct dev_pm_ops vpfe_dev_pm_ops = { |
7da8a6cb MK |
2018 | .suspend = vpfe_suspend, |
2019 | .resume = vpfe_resume, | |
2020 | }; | |
2021 | ||
a1b3a6ce | 2022 | static struct platform_driver vpfe_driver = { |
7da8a6cb MK |
2023 | .driver = { |
2024 | .name = CAPTURE_DRV_NAME, | |
7da8a6cb MK |
2025 | .pm = &vpfe_dev_pm_ops, |
2026 | }, | |
2027 | .probe = vpfe_probe, | |
4c62e976 | 2028 | .remove = vpfe_remove, |
7da8a6cb MK |
2029 | }; |
2030 | ||
1d6629b1 | 2031 | module_platform_driver(vpfe_driver); |