]>
Commit | Line | Data |
---|---|---|
ec8f24b7 | 1 | # SPDX-License-Identifier: GPL-2.0-only |
1da177e4 LT |
2 | # |
3 | # Multimedia Video device configuration | |
4 | # | |
5 | ||
c5da5afb JE |
6 | menuconfig RADIO_ADAPTERS |
7 | bool "Radio Adapters" | |
057596ee | 8 | depends on VIDEO_V4L2 |
724f4a32 | 9 | depends on MEDIA_RADIO_SUPPORT |
c5da5afb | 10 | default y |
b60a5b8d | 11 | help |
ff01652c | 12 | Say Y here to enable selecting AM/FM radio adapters. |
c5da5afb | 13 | |
057596ee | 14 | if RADIO_ADAPTERS && VIDEO_V4L2 |
1da177e4 | 15 | |
338c658a OZ |
16 | config RADIO_TEA575X |
17 | tristate | |
18 | ||
e21d9865 HV |
19 | source "drivers/media/radio/si470x/Kconfig" |
20 | ||
7391232e DR |
21 | config RADIO_SI4713 |
22 | tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support" | |
23 | depends on VIDEO_V4L2 | |
24 | ||
25 | source "drivers/media/radio/si4713/Kconfig" | |
26 | ||
b879a9c2 AS |
27 | config RADIO_SI476X |
28 | tristate "Silicon Laboratories Si476x I2C FM Radio" | |
29 | depends on I2C && VIDEO_V4L2 | |
30 | depends on MFD_SI476X_CORE | |
ea457ad9 | 31 | depends on SND_SOC |
b879a9c2 | 32 | select SND_SOC_SI476X |
b60a5b8d | 33 | help |
b879a9c2 AS |
34 | Choose Y here if you have this FM radio chip. |
35 | ||
36 | In order to control your radio card, you will need to use programs | |
37 | that are compatible with the Video For Linux 2 API. Information on | |
38 | this API and pointers to "v4l2" programs may be found at | |
2ebe0bb3 | 39 | <file:Documentation/media/media_uapi.rst>. |
b879a9c2 AS |
40 | |
41 | To compile this driver as a module, choose M here: the | |
42 | module will be called radio-si476x. | |
43 | ||
e21d9865 HV |
44 | config USB_MR800 |
45 | tristate "AverMedia MR 800 USB FM radio support" | |
46 | depends on USB && VIDEO_V4L2 | |
b60a5b8d | 47 | help |
e21d9865 HV |
48 | Say Y here if you want to connect this type of radio to your |
49 | computer's USB port. Note that the audio is not digital, and | |
50 | you must connect the line out connector to a sound card or a | |
51 | set of speakers. | |
52 | ||
53 | To compile this driver as a module, choose M here: the | |
54 | module will be called radio-mr800. | |
55 | ||
56 | config USB_DSBR | |
57 | tristate "D-Link/GemTek USB FM radio support" | |
58 | depends on USB && VIDEO_V4L2 | |
b60a5b8d | 59 | help |
e21d9865 HV |
60 | Say Y here if you want to connect this type of radio to your |
61 | computer's USB port. Note that the audio is not digital, and | |
62 | you must connect the line out connector to a sound card or a | |
63 | set of speakers. | |
64 | ||
65 | To compile this driver as a module, choose M here: the | |
66 | module will be called dsbr100. | |
67 | ||
68 | config RADIO_MAXIRADIO | |
69 | tristate "Guillemot MAXI Radio FM 2000 radio" | |
338c658a OZ |
70 | depends on VIDEO_V4L2 && PCI |
71 | select RADIO_TEA575X | |
b60a5b8d | 72 | help |
e21d9865 HV |
73 | Choose Y here if you have this radio card. This card may also be |
74 | found as Gemtek PCI FM. | |
75 | ||
76 | In order to control your radio card, you will need to use programs | |
77 | that are compatible with the Video For Linux API. Information on | |
78 | this API and pointers to "v4l" programs may be found at | |
2ebe0bb3 | 79 | <file:Documentation/media/media_uapi.rst>. |
e21d9865 HV |
80 | |
81 | To compile this driver as a module, choose M here: the | |
82 | module will be called radio-maxiradio. | |
83 | ||
8e2ce73e HG |
84 | config RADIO_SHARK |
85 | tristate "Griffin radioSHARK USB radio receiver" | |
338c658a OZ |
86 | depends on USB |
87 | select RADIO_TEA575X | |
b60a5b8d | 88 | help |
8e2ce73e HG |
89 | Choose Y here if you have this radio receiver. |
90 | ||
91 | There are 2 versions of this device, this driver is for version 1, | |
92 | which is white. | |
93 | ||
94 | In order to control your radio card, you will need to use programs | |
95 | that are compatible with the Video For Linux API. Information on | |
96 | this API and pointers to "v4l" programs may be found at | |
2ebe0bb3 | 97 | <file:Documentation/media/media_uapi.rst>. |
8e2ce73e HG |
98 | |
99 | To compile this driver as a module, choose M here: the | |
100 | module will be called radio-shark. | |
e21d9865 | 101 | |
4faba767 HG |
102 | config RADIO_SHARK2 |
103 | tristate "Griffin radioSHARK2 USB radio receiver" | |
104 | depends on USB | |
b60a5b8d | 105 | help |
4faba767 HG |
106 | Choose Y here if you have this radio receiver. |
107 | ||
108 | There are 2 versions of this device, this driver is for version 2, | |
109 | which is black. | |
110 | ||
111 | In order to control your radio card, you will need to use programs | |
112 | that are compatible with the Video For Linux API. Information on | |
113 | this API and pointers to "v4l" programs may be found at | |
2ebe0bb3 | 114 | <file:Documentation/media/media_uapi.rst>. |
4faba767 HG |
115 | |
116 | To compile this driver as a module, choose M here: the | |
117 | module will be called radio-shark2. | |
118 | ||
1bf20c3a HV |
119 | config USB_KEENE |
120 | tristate "Keene FM Transmitter USB support" | |
121 | depends on USB && VIDEO_V4L2 | |
b60a5b8d | 122 | help |
1bf20c3a HV |
123 | Say Y here if you want to connect this type of FM transmitter |
124 | to your computer's USB port. | |
125 | ||
126 | To compile this driver as a module, choose M here: the | |
127 | module will be called radio-keene. | |
128 | ||
21326c46 HV |
129 | config USB_RAREMONO |
130 | tristate "Thanko's Raremono AM/FM/SW radio support" | |
131 | depends on USB && VIDEO_V4L2 | |
b60a5b8d | 132 | help |
21326c46 HV |
133 | The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc. |
134 | It is one of the very few or perhaps the only consumer USB radio device | |
135 | to receive the AM/FM/SW bands. | |
136 | ||
137 | Say Y here if you want to connect this type of AM/FM/SW receiver | |
138 | to your computer's USB port. | |
139 | ||
140 | To compile this driver as a module, choose M here: the | |
141 | module will be called radio-raremono. | |
142 | ||
4834f4d1 AK |
143 | config USB_MA901 |
144 | tristate "Masterkit MA901 USB FM radio support" | |
145 | depends on USB && VIDEO_V4L2 | |
b60a5b8d | 146 | help |
4834f4d1 AK |
147 | Say Y here if you want to connect this type of radio to your |
148 | computer's USB port. Note that the audio is not digital, and | |
149 | you must connect the line out connector to a sound card or a | |
150 | set of speakers or headphones. | |
151 | ||
152 | To compile this driver as a module, choose M here: the | |
153 | module will be called radio-ma901. | |
154 | ||
e21d9865 HV |
155 | config RADIO_TEA5764 |
156 | tristate "TEA5764 I2C FM radio support" | |
157 | depends on I2C && VIDEO_V4L2 | |
b60a5b8d | 158 | help |
e21d9865 HV |
159 | Say Y here if you want to use the TEA5764 FM chip found in |
160 | EZX phones. This FM chip is present in EZX phones from Motorola, | |
161 | connected to internal pxa I2C bus. | |
162 | ||
163 | To compile this driver as a module, choose M here: the | |
164 | module will be called radio-tea5764. | |
165 | ||
166 | config RADIO_TEA5764_XTAL | |
167 | bool "TEA5764 crystal reference" | |
168 | depends on RADIO_TEA5764=y | |
169 | default y | |
170 | help | |
171 | Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N | |
172 | here if TEA5764 reference frequency is connected in FREQIN. | |
173 | ||
174 | config RADIO_SAA7706H | |
175 | tristate "SAA7706H Car Radio DSP" | |
176 | depends on I2C && VIDEO_V4L2 | |
b60a5b8d | 177 | help |
e21d9865 HV |
178 | Say Y here if you want to use the SAA7706H Car radio Digital |
179 | Signal Processor, found for instance on the Russellville development | |
180 | board. On the russellville the device is connected to internal | |
181 | timberdale I2C bus. | |
182 | ||
183 | To compile this driver as a module, choose M here: the | |
184 | module will be called SAA7706H. | |
185 | ||
186 | config RADIO_TEF6862 | |
187 | tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" | |
188 | depends on I2C && VIDEO_V4L2 | |
b60a5b8d | 189 | help |
e21d9865 HV |
190 | Say Y here if you want to use the TEF6862 Car Radio Enhanced |
191 | Selectivity Tuner, found for instance on the Russellville development | |
192 | board. On the russellville the device is connected to internal | |
193 | timberdale I2C bus. | |
194 | ||
195 | To compile this driver as a module, choose M here: the | |
196 | module will be called TEF6862. | |
197 | ||
198 | config RADIO_TIMBERDALE | |
199 | tristate "Enable the Timberdale radio driver" | |
200 | depends on MFD_TIMBERDALE && VIDEO_V4L2 | |
201 | depends on I2C # for RADIO_SAA7706H | |
202 | select RADIO_TEF6862 | |
203 | select RADIO_SAA7706H | |
b60a5b8d | 204 | help |
e21d9865 HV |
205 | This is a kind of umbrella driver for the Radio Tuner and DSP |
206 | found behind the Timberdale FPGA on the Russellville board. | |
207 | Enabling this driver will automatically select the DSP and tuner. | |
208 | ||
209 | config RADIO_WL1273 | |
210 | tristate "Texas Instruments WL1273 I2C FM Radio" | |
0244ad00 | 211 | depends on I2C && VIDEO_V4L2 |
e21d9865 HV |
212 | select MFD_CORE |
213 | select MFD_WL1273_CORE | |
214 | select FW_LOADER | |
b60a5b8d | 215 | help |
e21d9865 HV |
216 | Choose Y here if you have this FM radio chip. |
217 | ||
218 | In order to control your radio card, you will need to use programs | |
219 | that are compatible with the Video For Linux 2 API. Information on | |
220 | this API and pointers to "v4l2" programs may be found at | |
2ebe0bb3 | 221 | <file:Documentation/media/media_uapi.rst>. |
e21d9865 HV |
222 | |
223 | To compile this driver as a module, choose M here: the | |
224 | module will be called radio-wl1273. | |
225 | ||
226 | # TI's ST based wl128x FM radio | |
227 | source "drivers/media/radio/wl128x/Kconfig" | |
228 | ||
229 | # | |
230 | # ISA drivers configuration | |
231 | # | |
232 | ||
233 | menuconfig V4L_RADIO_ISA_DRIVERS | |
234 | bool "ISA radio devices" | |
258c524b | 235 | depends on ISA || COMPILE_TEST |
e21d9865 | 236 | default n |
b60a5b8d | 237 | help |
e21d9865 HV |
238 | Say Y here to enable support for these ISA drivers. |
239 | ||
240 | if V4L_RADIO_ISA_DRIVERS | |
241 | ||
137c579c | 242 | config RADIO_ISA |
258c524b | 243 | depends on ISA || COMPILE_TEST |
137c579c HV |
244 | tristate |
245 | ||
1da177e4 LT |
246 | config RADIO_CADET |
247 | tristate "ADS Cadet AM/FM Tuner" | |
258c524b MCC |
248 | depends on ISA || COMPILE_TEST |
249 | depends on VIDEO_V4L2 | |
b60a5b8d | 250 | help |
1da177e4 LT |
251 | Choose Y here if you have one of these AM/FM radio cards, and then |
252 | fill in the port address below. | |
253 | ||
1da177e4 LT |
254 | To compile this driver as a module, choose M here: the |
255 | module will be called radio-cadet. | |
256 | ||
257 | config RADIO_RTRACK | |
258 | tristate "AIMSlab RadioTrack (aka RadioReveal) support" | |
258c524b MCC |
259 | depends on ISA || COMPILE_TEST |
260 | depends on VIDEO_V4L2 | |
8d7ab3a0 | 261 | select RADIO_ISA |
b60a5b8d | 262 | help |
1da177e4 LT |
263 | Choose Y here if you have one of these FM radio cards, and then fill |
264 | in the port address below. | |
265 | ||
266 | Note that newer AIMSlab RadioTrack cards have a different chipset | |
267 | and are not supported by this driver. For these cards, use the | |
268 | RadioTrack II driver below. | |
269 | ||
270 | If you have a GemTeks combined (PnP) sound- and radio card you must | |
271 | use this driver as a module and setup the card with isapnptools. | |
272 | You must also pass the module a suitable io parameter, 0x248 has | |
273 | been reported to be used by these cards. | |
274 | ||
cc3c6df1 | 275 | More information is contained in the file |
5fb94e9c | 276 | <file:Documentation/media/v4l-drivers/radiotrack.rst>. |
1da177e4 LT |
277 | |
278 | To compile this driver as a module, choose M here: the | |
279 | module will be called radio-aimslab. | |
280 | ||
281 | config RADIO_RTRACK_PORT | |
282 | hex "RadioTrack i/o port (0x20f or 0x30f)" | |
283 | depends on RADIO_RTRACK=y | |
cc3c6df1 | 284 | default "30f" |
1da177e4 LT |
285 | help |
286 | Enter either 0x30f or 0x20f here. The card default is 0x30f, if you | |
287 | haven't changed the jumper setting on the card. | |
288 | ||
289 | config RADIO_RTRACK2 | |
290 | tristate "AIMSlab RadioTrack II support" | |
258c524b MCC |
291 | depends on ISA || COMPILE_TEST |
292 | depends on VIDEO_V4L2 | |
8bd7ef5a | 293 | select RADIO_ISA |
b60a5b8d | 294 | help |
1da177e4 LT |
295 | Choose Y here if you have this FM radio card, and then fill in the |
296 | port address below. | |
297 | ||
8bd7ef5a HV |
298 | Note: this driver hasn't been tested since a long time due to lack |
299 | of hardware. If you have this hardware, then please contact the | |
300 | linux-media mailinglist. | |
1da177e4 LT |
301 | |
302 | To compile this driver as a module, choose M here: the | |
303 | module will be called radio-rtrack2. | |
304 | ||
305 | config RADIO_RTRACK2_PORT | |
306 | hex "RadioTrack II i/o port (0x20c or 0x30c)" | |
307 | depends on RADIO_RTRACK2=y | |
308 | default "30c" | |
309 | help | |
310 | Enter either 0x30c or 0x20c here. The card default is 0x30c, if you | |
311 | haven't changed the jumper setting on the card. | |
312 | ||
313 | config RADIO_AZTECH | |
314 | tristate "Aztech/Packard Bell Radio" | |
258c524b MCC |
315 | depends on ISA || COMPILE_TEST |
316 | depends on VIDEO_V4L2 | |
3088fba8 | 317 | select RADIO_ISA |
b60a5b8d | 318 | help |
1da177e4 LT |
319 | Choose Y here if you have one of these FM radio cards, and then fill |
320 | in the port address below. | |
321 | ||
1da177e4 LT |
322 | To compile this driver as a module, choose M here: the |
323 | module will be called radio-aztech. | |
324 | ||
325 | config RADIO_AZTECH_PORT | |
326 | hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" | |
327 | depends on RADIO_AZTECH=y | |
328 | default "350" | |
329 | help | |
330 | Enter either 0x350 or 0x358 here. The card default is 0x350, if you | |
331 | haven't changed the setting of jumper JP3 on the card. Removing the | |
332 | jumper sets the card to 0x358. | |
333 | ||
334 | config RADIO_GEMTEK | |
3e7589c5 | 335 | tristate "GemTek Radio card (or compatible) support" |
258c524b MCC |
336 | depends on ISA || COMPILE_TEST |
337 | depends on VIDEO_V4L2 | |
f8c08524 | 338 | select RADIO_ISA |
b60a5b8d | 339 | help |
1da177e4 | 340 | Choose Y here if you have this FM radio card, and then fill in the |
3e7589c5 PS |
341 | I/O port address and settings below. The following cards either have |
342 | GemTek Radio tuner or are rebranded GemTek Radio cards: | |
343 | ||
344 | - Sound Vision 16 Gold with FM Radio | |
345 | - Typhoon Radio card (some models) | |
346 | - Hama Radio card | |
1da177e4 | 347 | |
1da177e4 LT |
348 | To compile this driver as a module, choose M here: the |
349 | module will be called radio-gemtek. | |
350 | ||
351 | config RADIO_GEMTEK_PORT | |
f8c08524 | 352 | hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)" |
1da177e4 LT |
353 | depends on RADIO_GEMTEK=y |
354 | default "34c" | |
355 | help | |
f8c08524 HV |
356 | Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The |
357 | card default is 0x34c, if you haven't changed the jumper setting | |
358 | on the card. | |
359 | ||
360 | On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O | |
3e7589c5 | 361 | port is 0x20c, 0x248 or 0x28c. |
f8c08524 | 362 | |
3e7589c5 PS |
363 | If automatic I/O port probing is enabled this port will be used only |
364 | in case of automatic probing failure, ie. as a fallback. | |
365 | ||
366 | config RADIO_GEMTEK_PROBE | |
367 | bool "Automatic I/O port probing" | |
368 | depends on RADIO_GEMTEK=y | |
369 | default y | |
370 | help | |
371 | Say Y here to enable automatic probing for GemTek Radio card. The | |
372 | following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and | |
373 | 0x28c. | |
1da177e4 | 374 | |
8366fc39 KH |
375 | config RADIO_MIROPCM20 |
376 | tristate "miroSOUND PCM20 radio" | |
e39fbc26 MCC |
377 | depends on ISA || COMPILE_TEST |
378 | depends on ISA_DMA_API && VIDEO_V4L2 && SND | |
dd7cdb88 | 379 | select SND_ISA |
8366fc39 | 380 | select SND_MIRO |
b60a5b8d | 381 | help |
8366fc39 KH |
382 | Choose Y here if you have this FM radio card. You also need to enable |
383 | the ALSA sound system. This choice automatically selects the ALSA | |
384 | sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this | |
385 | is required for the radio-miropcm20. | |
386 | ||
8366fc39 KH |
387 | To compile this driver as a module, choose M here: the |
388 | module will be called radio-miropcm20. | |
1da177e4 | 389 | |
1da177e4 | 390 | config RADIO_SF16FMI |
abed623c | 391 | tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" |
258c524b MCC |
392 | depends on ISA || COMPILE_TEST |
393 | depends on VIDEO_V4L2 | |
b60a5b8d | 394 | help |
67cabf50 | 395 | Choose Y here if you have one of these FM radio cards. |
1da177e4 | 396 | |
1da177e4 LT |
397 | To compile this driver as a module, choose M here: the |
398 | module will be called radio-sf16fmi. | |
399 | ||
400 | config RADIO_SF16FMR2 | |
3491a88e | 401 | tristate "SF16-FMR2/SF16-FMD2 Radio" |
258c524b MCC |
402 | depends on ISA || COMPILE_TEST |
403 | depends on VIDEO_V4L2 | |
338c658a | 404 | select RADIO_TEA575X |
b60a5b8d | 405 | help |
1da177e4 LT |
406 | Choose Y here if you have one of these FM radio cards. |
407 | ||
1da177e4 LT |
408 | To compile this driver as a module, choose M here: the |
409 | module will be called radio-sf16fmr2. | |
410 | ||
411 | config RADIO_TERRATEC | |
412 | tristate "TerraTec ActiveRadio ISA Standalone" | |
258c524b MCC |
413 | depends on ISA || COMPILE_TEST |
414 | depends on VIDEO_V4L2 | |
32c51836 | 415 | select RADIO_ISA |
b60a5b8d | 416 | help |
32c51836 | 417 | Choose Y here if you have this FM radio card. |
1da177e4 | 418 | |
32c51836 HV |
419 | Note: this driver hasn't been tested since a long time due to lack |
420 | of hardware. If you have this hardware, then please contact the | |
421 | linux-media mailinglist. | |
1da177e4 LT |
422 | |
423 | To compile this driver as a module, choose M here: the | |
424 | module will be called radio-terratec. | |
425 | ||
1da177e4 LT |
426 | config RADIO_TRUST |
427 | tristate "Trust FM radio card" | |
258c524b MCC |
428 | depends on ISA || COMPILE_TEST |
429 | depends on VIDEO_V4L2 | |
1d211f26 | 430 | select RADIO_ISA |
1da177e4 LT |
431 | help |
432 | This is a driver for the Trust FM radio cards. Say Y if you have | |
433 | such a card and want to use it under Linux. | |
434 | ||
1d211f26 HV |
435 | Note: this driver hasn't been tested since a long time due to lack |
436 | of hardware. If you have this hardware, then please contact the | |
437 | linux-media mailinglist. | |
438 | ||
1da177e4 LT |
439 | To compile this driver as a module, choose M here: the |
440 | module will be called radio-trust. | |
441 | ||
442 | config RADIO_TRUST_PORT | |
443 | hex "Trust i/o port (usually 0x350 or 0x358)" | |
444 | depends on RADIO_TRUST=y | |
445 | default "350" | |
446 | help | |
447 | Enter the I/O port of your Trust FM radio card. If unsure, try the | |
448 | values "0x350" or "0x358". | |
449 | ||
450 | config RADIO_TYPHOON | |
451 | tristate "Typhoon Radio (a.k.a. EcoRadio)" | |
258c524b MCC |
452 | depends on ISA || COMPILE_TEST |
453 | depends on VIDEO_V4L2 | |
da1ff351 | 454 | select RADIO_ISA |
b60a5b8d | 455 | help |
1da177e4 LT |
456 | Choose Y here if you have one of these FM radio cards, and then fill |
457 | in the port address and the frequency used for muting below. | |
458 | ||
da1ff351 HV |
459 | Note: this driver hasn't been tested since a long time due to lack |
460 | of hardware. If you have this hardware, then please contact the | |
461 | linux-media mailinglist. | |
1da177e4 LT |
462 | |
463 | To compile this driver as a module, choose M here: the | |
464 | module will be called radio-typhoon. | |
465 | ||
1da177e4 LT |
466 | config RADIO_TYPHOON_PORT |
467 | hex "Typhoon I/O port (0x316 or 0x336)" | |
468 | depends on RADIO_TYPHOON=y | |
469 | default "316" | |
470 | help | |
471 | Enter the I/O port of your Typhoon or EcoRadio radio card. | |
472 | ||
473 | config RADIO_TYPHOON_MUTEFREQ | |
474 | int "Typhoon frequency set when muting the device (kHz)" | |
475 | depends on RADIO_TYPHOON=y | |
476 | default "87500" | |
477 | help | |
478 | Enter the frequency used for muting the radio. The device is never | |
479 | completely silent. If the volume is just turned down, you can still | |
480 | hear silent voices and music. For that reason, the frequency of the | |
481 | radio device is set to the frequency you can enter here whenever | |
482 | the device is muted. There should be no local radio station at that | |
483 | frequency. | |
484 | ||
485 | config RADIO_ZOLTRIX | |
486 | tristate "Zoltrix Radio" | |
258c524b MCC |
487 | depends on ISA || COMPILE_TEST |
488 | depends on VIDEO_V4L2 | |
6b39246c | 489 | select RADIO_ISA |
b60a5b8d | 490 | help |
1da177e4 LT |
491 | Choose Y here if you have one of these FM radio cards, and then fill |
492 | in the port address below. | |
493 | ||
6b39246c HV |
494 | Note: this driver hasn't been tested since a long time due to lack |
495 | of hardware. If you have this hardware, then please contact the | |
496 | linux-media mailinglist. | |
1da177e4 LT |
497 | |
498 | To compile this driver as a module, choose M here: the | |
499 | module will be called radio-zoltrix. | |
500 | ||
501 | config RADIO_ZOLTRIX_PORT | |
502 | hex "ZOLTRIX I/O port (0x20c or 0x30c)" | |
503 | depends on RADIO_ZOLTRIX=y | |
504 | default "20c" | |
505 | help | |
506 | Enter the I/O port of your Zoltrix radio card. | |
507 | ||
e21d9865 | 508 | endif # V4L_RADIO_ISA_DRIVERS |
57f05bfa | 509 | |
c5da5afb | 510 | endif # RADIO_ADAPTERS |