]>
Commit | Line | Data |
---|---|---|
111f3356 JC |
1 | /* |
2 | * A V4L2 driver for OmniVision OV7670 cameras. | |
3 | * | |
4 | * Copyright 2006 One Laptop Per Child Association, Inc. Written | |
5 | * by Jonathan Corbet with substantial inspiration from Mark | |
6 | * McClelland's ovcamchip code. | |
7 | * | |
8 | * This file may be distributed under the terms of the GNU General | |
9 | * Public License, version 2. | |
10 | */ | |
11 | #include <linux/init.h> | |
12 | #include <linux/module.h> | |
13 | #include <linux/moduleparam.h> | |
14 | #include <linux/slab.h> | |
15 | #include <linux/delay.h> | |
16 | #include <linux/videodev.h> | |
17 | #include <media/v4l2-common.h> | |
18 | #include <linux/i2c.h> | |
19 | ||
20 | ||
21 | MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net."); | |
22 | MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors"); | |
23 | MODULE_LICENSE("GPL"); | |
24 | ||
25 | /* | |
26 | * Basic window sizes. These probably belong somewhere more globally | |
27 | * useful. | |
28 | */ | |
29 | #define VGA_WIDTH 640 | |
30 | #define VGA_HEIGHT 480 | |
31 | #define QVGA_WIDTH 320 | |
32 | #define QVGA_HEIGHT 240 | |
33 | #define CIF_WIDTH 352 | |
34 | #define CIF_HEIGHT 288 | |
35 | #define QCIF_WIDTH 176 | |
36 | #define QCIF_HEIGHT 144 | |
37 | ||
c8f5b2f5 JC |
38 | /* |
39 | * Our nominal (default) frame rate. | |
40 | */ | |
41 | #define OV7670_FRAME_RATE 30 | |
42 | ||
111f3356 JC |
43 | /* |
44 | * The 7670 sits on i2c with ID 0x42 | |
45 | */ | |
46 | #define OV7670_I2C_ADDR 0x42 | |
47 | ||
48 | /* Registers */ | |
49 | #define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */ | |
50 | #define REG_BLUE 0x01 /* blue gain */ | |
51 | #define REG_RED 0x02 /* red gain */ | |
52 | #define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */ | |
53 | #define REG_COM1 0x04 /* Control 1 */ | |
54 | #define COM1_CCIR656 0x40 /* CCIR656 enable */ | |
55 | #define REG_BAVE 0x05 /* U/B Average level */ | |
56 | #define REG_GbAVE 0x06 /* Y/Gb Average level */ | |
57 | #define REG_AECHH 0x07 /* AEC MS 5 bits */ | |
58 | #define REG_RAVE 0x08 /* V/R Average level */ | |
59 | #define REG_COM2 0x09 /* Control 2 */ | |
60 | #define COM2_SSLEEP 0x10 /* Soft sleep mode */ | |
61 | #define REG_PID 0x0a /* Product ID MSB */ | |
62 | #define REG_VER 0x0b /* Product ID LSB */ | |
63 | #define REG_COM3 0x0c /* Control 3 */ | |
64 | #define COM3_SWAP 0x40 /* Byte swap */ | |
65 | #define COM3_SCALEEN 0x08 /* Enable scaling */ | |
66 | #define COM3_DCWEN 0x04 /* Enable downsamp/crop/window */ | |
67 | #define REG_COM4 0x0d /* Control 4 */ | |
68 | #define REG_COM5 0x0e /* All "reserved" */ | |
69 | #define REG_COM6 0x0f /* Control 6 */ | |
70 | #define REG_AECH 0x10 /* More bits of AEC value */ | |
71 | #define REG_CLKRC 0x11 /* Clocl control */ | |
72 | #define CLK_EXT 0x40 /* Use external clock directly */ | |
73 | #define CLK_SCALE 0x3f /* Mask for internal clock scale */ | |
74 | #define REG_COM7 0x12 /* Control 7 */ | |
75 | #define COM7_RESET 0x80 /* Register reset */ | |
76 | #define COM7_FMT_MASK 0x38 | |
77 | #define COM7_FMT_VGA 0x00 | |
78 | #define COM7_FMT_CIF 0x20 /* CIF format */ | |
79 | #define COM7_FMT_QVGA 0x10 /* QVGA format */ | |
80 | #define COM7_FMT_QCIF 0x08 /* QCIF format */ | |
81 | #define COM7_RGB 0x04 /* bits 0 and 2 - RGB format */ | |
82 | #define COM7_YUV 0x00 /* YUV */ | |
83 | #define COM7_BAYER 0x01 /* Bayer format */ | |
84 | #define COM7_PBAYER 0x05 /* "Processed bayer" */ | |
85 | #define REG_COM8 0x13 /* Control 8 */ | |
86 | #define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */ | |
87 | #define COM8_AECSTEP 0x40 /* Unlimited AEC step size */ | |
88 | #define COM8_BFILT 0x20 /* Band filter enable */ | |
89 | #define COM8_AGC 0x04 /* Auto gain enable */ | |
90 | #define COM8_AWB 0x02 /* White balance enable */ | |
91 | #define COM8_AEC 0x01 /* Auto exposure enable */ | |
92 | #define REG_COM9 0x14 /* Control 9 - gain ceiling */ | |
93 | #define REG_COM10 0x15 /* Control 10 */ | |
94 | #define COM10_HSYNC 0x40 /* HSYNC instead of HREF */ | |
95 | #define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */ | |
96 | #define COM10_HREF_REV 0x08 /* Reverse HREF */ | |
97 | #define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */ | |
98 | #define COM10_VS_NEG 0x02 /* VSYNC negative */ | |
99 | #define COM10_HS_NEG 0x01 /* HSYNC negative */ | |
100 | #define REG_HSTART 0x17 /* Horiz start high bits */ | |
101 | #define REG_HSTOP 0x18 /* Horiz stop high bits */ | |
102 | #define REG_VSTART 0x19 /* Vert start high bits */ | |
103 | #define REG_VSTOP 0x1a /* Vert stop high bits */ | |
104 | #define REG_PSHFT 0x1b /* Pixel delay after HREF */ | |
105 | #define REG_MIDH 0x1c /* Manuf. ID high */ | |
106 | #define REG_MIDL 0x1d /* Manuf. ID low */ | |
107 | #define REG_MVFP 0x1e /* Mirror / vflip */ | |
108 | #define MVFP_MIRROR 0x20 /* Mirror image */ | |
109 | #define MVFP_FLIP 0x10 /* Vertical flip */ | |
110 | ||
111 | #define REG_AEW 0x24 /* AGC upper limit */ | |
112 | #define REG_AEB 0x25 /* AGC lower limit */ | |
113 | #define REG_VPT 0x26 /* AGC/AEC fast mode op region */ | |
114 | #define REG_HSYST 0x30 /* HSYNC rising edge delay */ | |
115 | #define REG_HSYEN 0x31 /* HSYNC falling edge delay */ | |
116 | #define REG_HREF 0x32 /* HREF pieces */ | |
117 | #define REG_TSLB 0x3a /* lots of stuff */ | |
118 | #define TSLB_YLAST 0x04 /* UYVY or VYUY - see com13 */ | |
119 | #define REG_COM11 0x3b /* Control 11 */ | |
120 | #define COM11_NIGHT 0x80 /* NIght mode enable */ | |
121 | #define COM11_NMFR 0x60 /* Two bit NM frame rate */ | |
122 | #define COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */ | |
123 | #define COM11_50HZ 0x08 /* Manual 50Hz select */ | |
124 | #define COM11_EXP 0x02 | |
125 | #define REG_COM12 0x3c /* Control 12 */ | |
126 | #define COM12_HREF 0x80 /* HREF always */ | |
127 | #define REG_COM13 0x3d /* Control 13 */ | |
128 | #define COM13_GAMMA 0x80 /* Gamma enable */ | |
129 | #define COM13_UVSAT 0x40 /* UV saturation auto adjustment */ | |
130 | #define COM13_UVSWAP 0x01 /* V before U - w/TSLB */ | |
131 | #define REG_COM14 0x3e /* Control 14 */ | |
132 | #define COM14_DCWEN 0x10 /* DCW/PCLK-scale enable */ | |
133 | #define REG_EDGE 0x3f /* Edge enhancement factor */ | |
134 | #define REG_COM15 0x40 /* Control 15 */ | |
135 | #define COM15_R10F0 0x00 /* Data range 10 to F0 */ | |
136 | #define COM15_R01FE 0x80 /* 01 to FE */ | |
137 | #define COM15_R00FF 0xc0 /* 00 to FF */ | |
138 | #define COM15_RGB565 0x10 /* RGB565 output */ | |
139 | #define COM15_RGB555 0x30 /* RGB555 output */ | |
140 | #define REG_COM16 0x41 /* Control 16 */ | |
141 | #define COM16_AWBGAIN 0x08 /* AWB gain enable */ | |
142 | #define REG_COM17 0x42 /* Control 17 */ | |
143 | #define COM17_AECWIN 0xc0 /* AEC window - must match COM4 */ | |
144 | #define COM17_CBAR 0x08 /* DSP Color bar */ | |
145 | ||
f9a76156 JC |
146 | /* |
147 | * This matrix defines how the colors are generated, must be | |
148 | * tweaked to adjust hue and saturation. | |
149 | * | |
150 | * Order: v-red, v-green, v-blue, u-red, u-green, u-blue | |
151 | * | |
152 | * They are nine-bit signed quantities, with the sign bit | |
153 | * stored in 0x58. Sign for v-red is bit 0, and up from there. | |
154 | */ | |
155 | #define REG_CMATRIX_BASE 0x4f | |
156 | #define CMATRIX_LEN 6 | |
157 | #define REG_CMATRIX_SIGN 0x58 | |
158 | ||
159 | ||
111f3356 JC |
160 | #define REG_BRIGHT 0x55 /* Brightness */ |
161 | #define REG_CONTRAS 0x56 /* Contrast control */ | |
162 | ||
163 | #define REG_GFIX 0x69 /* Fix gain control */ | |
164 | ||
165 | #define REG_RGB444 0x8c /* RGB 444 control */ | |
166 | #define R444_ENABLE 0x02 /* Turn on RGB444, overrides 5x5 */ | |
167 | #define R444_RGBX 0x01 /* Empty nibble at end */ | |
168 | ||
169 | #define REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */ | |
170 | #define REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */ | |
171 | ||
172 | #define REG_BD50MAX 0xa5 /* 50hz banding step limit */ | |
173 | #define REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */ | |
174 | #define REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */ | |
175 | #define REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */ | |
176 | #define REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */ | |
177 | #define REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */ | |
178 | #define REG_BD60MAX 0xab /* 60hz banding step limit */ | |
179 | ||
180 | ||
f9a76156 JC |
181 | /* |
182 | * Information we maintain about a known sensor. | |
183 | */ | |
184 | struct ov7670_format_struct; /* coming later */ | |
185 | struct ov7670_info { | |
186 | struct ov7670_format_struct *fmt; /* Current format */ | |
187 | unsigned char sat; /* Saturation value */ | |
188 | int hue; /* Hue value */ | |
189 | }; | |
190 | ||
191 | ||
192 | ||
193 | ||
111f3356 JC |
194 | /* |
195 | * The default register settings, as obtained from OmniVision. There | |
196 | * is really no making sense of most of these - lots of "reserved" values | |
197 | * and such. | |
198 | * | |
199 | * These settings give VGA YUYV. | |
200 | */ | |
201 | ||
202 | struct regval_list { | |
203 | unsigned char reg_num; | |
204 | unsigned char value; | |
205 | }; | |
206 | ||
207 | static struct regval_list ov7670_default_regs[] = { | |
208 | { REG_COM7, COM7_RESET }, | |
209 | /* | |
210 | * Clock scale: 3 = 15fps | |
211 | * 2 = 20fps | |
212 | * 1 = 30fps | |
213 | */ | |
f9a76156 | 214 | { REG_CLKRC, 0x1 }, /* OV: clock scale (30 fps) */ |
111f3356 JC |
215 | { REG_TSLB, 0x04 }, /* OV */ |
216 | { REG_COM7, 0 }, /* VGA */ | |
217 | /* | |
218 | * Set the hardware window. These values from OV don't entirely | |
219 | * make sense - hstop is less than hstart. But they work... | |
220 | */ | |
221 | { REG_HSTART, 0x13 }, { REG_HSTOP, 0x01 }, | |
222 | { REG_HREF, 0xb6 }, { REG_VSTART, 0x02 }, | |
223 | { REG_VSTOP, 0x7a }, { REG_VREF, 0x0a }, | |
224 | ||
225 | { REG_COM3, 0 }, { REG_COM14, 0 }, | |
226 | /* Mystery scaling numbers */ | |
227 | { 0x70, 0x3a }, { 0x71, 0x35 }, | |
228 | { 0x72, 0x11 }, { 0x73, 0xf0 }, | |
229 | { 0xa2, 0x02 }, { REG_COM10, 0x0 }, | |
230 | ||
231 | /* Gamma curve values */ | |
232 | { 0x7a, 0x20 }, { 0x7b, 0x10 }, | |
233 | { 0x7c, 0x1e }, { 0x7d, 0x35 }, | |
234 | { 0x7e, 0x5a }, { 0x7f, 0x69 }, | |
235 | { 0x80, 0x76 }, { 0x81, 0x80 }, | |
236 | { 0x82, 0x88 }, { 0x83, 0x8f }, | |
237 | { 0x84, 0x96 }, { 0x85, 0xa3 }, | |
238 | { 0x86, 0xaf }, { 0x87, 0xc4 }, | |
239 | { 0x88, 0xd7 }, { 0x89, 0xe8 }, | |
240 | ||
241 | /* AGC and AEC parameters. Note we start by disabling those features, | |
242 | then turn them only after tweaking the values. */ | |
243 | { REG_COM8, COM8_FASTAEC | COM8_AECSTEP | COM8_BFILT }, | |
244 | { REG_GAIN, 0 }, { REG_AECH, 0 }, | |
245 | { REG_COM4, 0x40 }, /* magic reserved bit */ | |
246 | { REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */ | |
247 | { REG_BD50MAX, 0x05 }, { REG_BD60MAX, 0x07 }, | |
248 | { REG_AEW, 0x95 }, { REG_AEB, 0x33 }, | |
249 | { REG_VPT, 0xe3 }, { REG_HAECC1, 0x78 }, | |
250 | { REG_HAECC2, 0x68 }, { 0xa1, 0x03 }, /* magic */ | |
251 | { REG_HAECC3, 0xd8 }, { REG_HAECC4, 0xd8 }, | |
252 | { REG_HAECC5, 0xf0 }, { REG_HAECC6, 0x90 }, | |
253 | { REG_HAECC7, 0x94 }, | |
254 | { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC }, | |
255 | ||
256 | /* Almost all of these are magic "reserved" values. */ | |
257 | { REG_COM5, 0x61 }, { REG_COM6, 0x4b }, | |
258 | { 0x16, 0x02 }, { REG_MVFP, 0x07|MVFP_MIRROR }, | |
259 | { 0x21, 0x02 }, { 0x22, 0x91 }, | |
260 | { 0x29, 0x07 }, { 0x33, 0x0b }, | |
261 | { 0x35, 0x0b }, { 0x37, 0x1d }, | |
262 | { 0x38, 0x71 }, { 0x39, 0x2a }, | |
263 | { REG_COM12, 0x78 }, { 0x4d, 0x40 }, | |
264 | { 0x4e, 0x20 }, { REG_GFIX, 0 }, | |
265 | { 0x6b, 0x4a }, { 0x74, 0x10 }, | |
266 | { 0x8d, 0x4f }, { 0x8e, 0 }, | |
267 | { 0x8f, 0 }, { 0x90, 0 }, | |
268 | { 0x91, 0 }, { 0x96, 0 }, | |
269 | { 0x9a, 0 }, { 0xb0, 0x84 }, | |
270 | { 0xb1, 0x0c }, { 0xb2, 0x0e }, | |
271 | { 0xb3, 0x82 }, { 0xb8, 0x0a }, | |
272 | ||
273 | /* More reserved magic, some of which tweaks white balance */ | |
274 | { 0x43, 0x0a }, { 0x44, 0xf0 }, | |
275 | { 0x45, 0x34 }, { 0x46, 0x58 }, | |
276 | { 0x47, 0x28 }, { 0x48, 0x3a }, | |
277 | { 0x59, 0x88 }, { 0x5a, 0x88 }, | |
278 | { 0x5b, 0x44 }, { 0x5c, 0x67 }, | |
279 | { 0x5d, 0x49 }, { 0x5e, 0x0e }, | |
280 | { 0x6c, 0x0a }, { 0x6d, 0x55 }, | |
281 | { 0x6e, 0x11 }, { 0x6f, 0x9f }, /* "9e for advance AWB" */ | |
282 | { 0x6a, 0x40 }, { REG_BLUE, 0x40 }, | |
283 | { REG_RED, 0x60 }, | |
284 | { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC|COM8_AWB }, | |
285 | ||
286 | /* Matrix coefficients */ | |
287 | { 0x4f, 0x80 }, { 0x50, 0x80 }, | |
288 | { 0x51, 0 }, { 0x52, 0x22 }, | |
289 | { 0x53, 0x5e }, { 0x54, 0x80 }, | |
290 | { 0x58, 0x9e }, | |
291 | ||
292 | { REG_COM16, COM16_AWBGAIN }, { REG_EDGE, 0 }, | |
293 | { 0x75, 0x05 }, { 0x76, 0xe1 }, | |
294 | { 0x4c, 0 }, { 0x77, 0x01 }, | |
295 | { REG_COM13, 0xc3 }, { 0x4b, 0x09 }, | |
296 | { 0xc9, 0x60 }, { REG_COM16, 0x38 }, | |
297 | { 0x56, 0x40 }, | |
298 | ||
c8f5b2f5 | 299 | { 0x34, 0x11 }, { REG_COM11, COM11_EXP|COM11_HZAUTO }, |
111f3356 JC |
300 | { 0xa4, 0x88 }, { 0x96, 0 }, |
301 | { 0x97, 0x30 }, { 0x98, 0x20 }, | |
302 | { 0x99, 0x30 }, { 0x9a, 0x84 }, | |
303 | { 0x9b, 0x29 }, { 0x9c, 0x03 }, | |
304 | { 0x9d, 0x4c }, { 0x9e, 0x3f }, | |
305 | { 0x78, 0x04 }, | |
306 | ||
307 | /* Extra-weird stuff. Some sort of multiplexor register */ | |
308 | { 0x79, 0x01 }, { 0xc8, 0xf0 }, | |
309 | { 0x79, 0x0f }, { 0xc8, 0x00 }, | |
310 | { 0x79, 0x10 }, { 0xc8, 0x7e }, | |
311 | { 0x79, 0x0a }, { 0xc8, 0x80 }, | |
312 | { 0x79, 0x0b }, { 0xc8, 0x01 }, | |
313 | { 0x79, 0x0c }, { 0xc8, 0x0f }, | |
314 | { 0x79, 0x0d }, { 0xc8, 0x20 }, | |
315 | { 0x79, 0x09 }, { 0xc8, 0x80 }, | |
316 | { 0x79, 0x02 }, { 0xc8, 0xc0 }, | |
317 | { 0x79, 0x03 }, { 0xc8, 0x40 }, | |
318 | { 0x79, 0x05 }, { 0xc8, 0x30 }, | |
319 | { 0x79, 0x26 }, | |
320 | ||
111f3356 JC |
321 | { 0xff, 0xff }, /* END MARKER */ |
322 | }; | |
323 | ||
324 | ||
325 | /* | |
326 | * Here we'll try to encapsulate the changes for just the output | |
327 | * video format. | |
328 | * | |
329 | * RGB656 and YUV422 come from OV; RGB444 is homebrewed. | |
330 | * | |
331 | * IMPORTANT RULE: the first entry must be for COM7, see ov7670_s_fmt for why. | |
332 | */ | |
333 | ||
334 | ||
335 | static struct regval_list ov7670_fmt_yuv422[] = { | |
336 | { REG_COM7, 0x0 }, /* Selects YUV mode */ | |
337 | { REG_RGB444, 0 }, /* No RGB444 please */ | |
338 | { REG_COM1, 0 }, | |
339 | { REG_COM15, COM15_R00FF }, | |
340 | { REG_COM9, 0x18 }, /* 4x gain ceiling; 0x8 is reserved bit */ | |
341 | { 0x4f, 0x80 }, /* "matrix coefficient 1" */ | |
342 | { 0x50, 0x80 }, /* "matrix coefficient 2" */ | |
f9a76156 | 343 | { 0x51, 0 }, /* vb */ |
111f3356 JC |
344 | { 0x52, 0x22 }, /* "matrix coefficient 4" */ |
345 | { 0x53, 0x5e }, /* "matrix coefficient 5" */ | |
346 | { 0x54, 0x80 }, /* "matrix coefficient 6" */ | |
347 | { REG_COM13, COM13_GAMMA|COM13_UVSAT }, | |
348 | { 0xff, 0xff }, | |
349 | }; | |
350 | ||
351 | static struct regval_list ov7670_fmt_rgb565[] = { | |
352 | { REG_COM7, COM7_RGB }, /* Selects RGB mode */ | |
353 | { REG_RGB444, 0 }, /* No RGB444 please */ | |
354 | { REG_COM1, 0x0 }, | |
355 | { REG_COM15, COM15_RGB565 }, | |
356 | { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ | |
357 | { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ | |
358 | { 0x50, 0xb3 }, /* "matrix coefficient 2" */ | |
f9a76156 | 359 | { 0x51, 0 }, /* vb */ |
111f3356 JC |
360 | { 0x52, 0x3d }, /* "matrix coefficient 4" */ |
361 | { 0x53, 0xa7 }, /* "matrix coefficient 5" */ | |
362 | { 0x54, 0xe4 }, /* "matrix coefficient 6" */ | |
363 | { REG_COM13, COM13_GAMMA|COM13_UVSAT }, | |
364 | { 0xff, 0xff }, | |
365 | }; | |
366 | ||
367 | static struct regval_list ov7670_fmt_rgb444[] = { | |
368 | { REG_COM7, COM7_RGB }, /* Selects RGB mode */ | |
369 | { REG_RGB444, R444_ENABLE }, /* Enable xxxxrrrr ggggbbbb */ | |
370 | { REG_COM1, 0x40 }, /* Magic reserved bit */ | |
371 | { REG_COM15, COM15_R01FE|COM15_RGB565 }, /* Data range needed? */ | |
372 | { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ | |
373 | { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ | |
374 | { 0x50, 0xb3 }, /* "matrix coefficient 2" */ | |
f9a76156 | 375 | { 0x51, 0 }, /* vb */ |
111f3356 JC |
376 | { 0x52, 0x3d }, /* "matrix coefficient 4" */ |
377 | { 0x53, 0xa7 }, /* "matrix coefficient 5" */ | |
378 | { 0x54, 0xe4 }, /* "matrix coefficient 6" */ | |
379 | { REG_COM13, COM13_GAMMA|COM13_UVSAT|0x2 }, /* Magic rsvd bit */ | |
380 | { 0xff, 0xff }, | |
381 | }; | |
382 | ||
383 | ||
384 | ||
385 | ||
386 | /* | |
387 | * Low-level register I/O. | |
388 | */ | |
389 | ||
390 | static int ov7670_read(struct i2c_client *c, unsigned char reg, | |
391 | unsigned char *value) | |
392 | { | |
393 | int ret; | |
394 | ||
395 | ret = i2c_smbus_read_byte_data(c, reg); | |
f9a76156 | 396 | if (ret >= 0) |
111f3356 JC |
397 | *value = (unsigned char) ret; |
398 | return ret; | |
399 | } | |
400 | ||
401 | ||
402 | static int ov7670_write(struct i2c_client *c, unsigned char reg, | |
403 | unsigned char value) | |
404 | { | |
405 | return i2c_smbus_write_byte_data(c, reg, value); | |
406 | } | |
407 | ||
408 | ||
409 | /* | |
410 | * Write a list of register settings; ff/ff stops the process. | |
411 | */ | |
412 | static int ov7670_write_array(struct i2c_client *c, struct regval_list *vals) | |
413 | { | |
414 | while (vals->reg_num != 0xff || vals->value != 0xff) { | |
415 | int ret = ov7670_write(c, vals->reg_num, vals->value); | |
416 | if (ret < 0) | |
417 | return ret; | |
418 | vals++; | |
419 | } | |
420 | return 0; | |
421 | } | |
422 | ||
423 | ||
424 | /* | |
425 | * Stuff that knows about the sensor. | |
426 | */ | |
427 | static void ov7670_reset(struct i2c_client *client) | |
428 | { | |
429 | ov7670_write(client, REG_COM7, COM7_RESET); | |
430 | msleep(1); | |
431 | } | |
432 | ||
433 | ||
434 | static int ov7670_init(struct i2c_client *client) | |
435 | { | |
436 | return ov7670_write_array(client, ov7670_default_regs); | |
437 | } | |
438 | ||
439 | ||
440 | ||
441 | static int ov7670_detect(struct i2c_client *client) | |
442 | { | |
443 | unsigned char v; | |
444 | int ret; | |
445 | ||
446 | ret = ov7670_init(client); | |
447 | if (ret < 0) | |
448 | return ret; | |
449 | ret = ov7670_read(client, REG_MIDH, &v); | |
450 | if (ret < 0) | |
451 | return ret; | |
452 | if (v != 0x7f) /* OV manuf. id. */ | |
453 | return -ENODEV; | |
454 | ret = ov7670_read(client, REG_MIDL, &v); | |
455 | if (ret < 0) | |
456 | return ret; | |
457 | if (v != 0xa2) | |
458 | return -ENODEV; | |
459 | /* | |
460 | * OK, we know we have an OmniVision chip...but which one? | |
461 | */ | |
462 | ret = ov7670_read(client, REG_PID, &v); | |
463 | if (ret < 0) | |
464 | return ret; | |
465 | if (v != 0x76) /* PID + VER = 0x76 / 0x73 */ | |
466 | return -ENODEV; | |
467 | ret = ov7670_read(client, REG_VER, &v); | |
468 | if (ret < 0) | |
469 | return ret; | |
470 | if (v != 0x73) /* PID + VER = 0x76 / 0x73 */ | |
471 | return -ENODEV; | |
472 | return 0; | |
473 | } | |
474 | ||
475 | ||
f9a76156 JC |
476 | /* |
477 | * Store information about the video data format. The color matrix | |
478 | * is deeply tied into the format, so keep the relevant values here. | |
479 | * The magic matrix nubmers come from OmniVision. | |
480 | */ | |
111f3356 JC |
481 | static struct ov7670_format_struct { |
482 | __u8 *desc; | |
483 | __u32 pixelformat; | |
484 | struct regval_list *regs; | |
f9a76156 | 485 | int cmatrix[CMATRIX_LEN]; |
111f3356 JC |
486 | } ov7670_formats[] = { |
487 | { | |
488 | .desc = "YUYV 4:2:2", | |
489 | .pixelformat = V4L2_PIX_FMT_YUYV, | |
490 | .regs = ov7670_fmt_yuv422, | |
f9a76156 | 491 | .cmatrix = { 128, -128, 0, -34, -94, 128 }, |
111f3356 JC |
492 | }, |
493 | { | |
494 | .desc = "RGB 444", | |
495 | .pixelformat = V4L2_PIX_FMT_RGB444, | |
496 | .regs = ov7670_fmt_rgb444, | |
f9a76156 | 497 | .cmatrix = { 179, -179, 0, -61, -176, 228 }, |
111f3356 JC |
498 | }, |
499 | { | |
500 | .desc = "RGB 565", | |
501 | .pixelformat = V4L2_PIX_FMT_RGB565, | |
502 | .regs = ov7670_fmt_rgb565, | |
f9a76156 | 503 | .cmatrix = { 179, -179, 0, -61, -176, 228 }, |
111f3356 | 504 | }, |
111f3356 JC |
505 | }; |
506 | #define N_OV7670_FMTS (sizeof(ov7670_formats)/sizeof(ov7670_formats[0])) | |
507 | ||
508 | /* | |
509 | * All formats we support are 2 bytes/pixel. | |
510 | */ | |
511 | #define BYTES_PER_PIXEL 2 | |
512 | ||
513 | /* | |
514 | * Then there is the issue of window sizes. Try to capture the info here. | |
515 | */ | |
f9a76156 JC |
516 | |
517 | /* | |
518 | * QCIF mode is done (by OV) in a very strange way - it actually looks like | |
519 | * VGA with weird scaling options - they do *not* use the canned QCIF mode | |
520 | * which is allegedly provided by the sensor. So here's the weird register | |
521 | * settings. | |
522 | */ | |
523 | static struct regval_list ov7670_qcif_regs[] = { | |
524 | { REG_COM3, COM3_SCALEEN|COM3_DCWEN }, | |
525 | { REG_COM3, COM3_DCWEN }, | |
526 | { REG_COM14, COM14_DCWEN | 0x01}, | |
527 | { 0x73, 0xf1 }, | |
528 | { 0xa2, 0x52 }, | |
529 | { 0x7b, 0x1c }, | |
530 | { 0x7c, 0x28 }, | |
531 | { 0x7d, 0x3c }, | |
532 | { 0x7f, 0x69 }, | |
533 | { REG_COM9, 0x38 }, | |
534 | { 0xa1, 0x0b }, | |
535 | { 0x74, 0x19 }, | |
536 | { 0x9a, 0x80 }, | |
537 | { 0x43, 0x14 }, | |
538 | { REG_COM13, 0xc0 }, | |
539 | { 0xff, 0xff }, | |
540 | }; | |
541 | ||
111f3356 JC |
542 | static struct ov7670_win_size { |
543 | int width; | |
544 | int height; | |
545 | unsigned char com7_bit; | |
546 | int hstart; /* Start/stop values for the camera. Note */ | |
547 | int hstop; /* that they do not always make complete */ | |
548 | int vstart; /* sense to humans, but evidently the sensor */ | |
549 | int vstop; /* will do the right thing... */ | |
f9a76156 | 550 | struct regval_list *regs; /* Regs to tweak */ |
111f3356 JC |
551 | /* h/vref stuff */ |
552 | } ov7670_win_sizes[] = { | |
553 | /* VGA */ | |
554 | { | |
555 | .width = VGA_WIDTH, | |
556 | .height = VGA_HEIGHT, | |
557 | .com7_bit = COM7_FMT_VGA, | |
558 | .hstart = 158, /* These values from */ | |
559 | .hstop = 14, /* Omnivision */ | |
560 | .vstart = 10, | |
561 | .vstop = 490, | |
f9a76156 | 562 | .regs = NULL, |
111f3356 JC |
563 | }, |
564 | /* CIF */ | |
565 | { | |
566 | .width = CIF_WIDTH, | |
567 | .height = CIF_HEIGHT, | |
568 | .com7_bit = COM7_FMT_CIF, | |
569 | .hstart = 170, /* Empirically determined */ | |
570 | .hstop = 90, | |
571 | .vstart = 14, | |
572 | .vstop = 494, | |
f9a76156 | 573 | .regs = NULL, |
111f3356 JC |
574 | }, |
575 | /* QVGA */ | |
576 | { | |
577 | .width = QVGA_WIDTH, | |
578 | .height = QVGA_HEIGHT, | |
579 | .com7_bit = COM7_FMT_QVGA, | |
580 | .hstart = 164, /* Empirically determined */ | |
581 | .hstop = 20, | |
582 | .vstart = 14, | |
583 | .vstop = 494, | |
f9a76156 JC |
584 | .regs = NULL, |
585 | }, | |
586 | /* QCIF */ | |
587 | { | |
588 | .width = QCIF_WIDTH, | |
589 | .height = QCIF_HEIGHT, | |
590 | .com7_bit = COM7_FMT_VGA, /* see comment above */ | |
591 | .hstart = 456, /* Empirically determined */ | |
592 | .hstop = 24, | |
593 | .vstart = 14, | |
594 | .vstop = 494, | |
595 | .regs = ov7670_qcif_regs, | |
111f3356 JC |
596 | }, |
597 | }; | |
598 | ||
599 | #define N_WIN_SIZES (sizeof(ov7670_win_sizes)/sizeof(ov7670_win_sizes[0])) | |
600 | ||
601 | ||
602 | /* | |
603 | * Store a set of start/stop values into the camera. | |
604 | */ | |
605 | static int ov7670_set_hw(struct i2c_client *client, int hstart, int hstop, | |
606 | int vstart, int vstop) | |
607 | { | |
608 | int ret; | |
609 | unsigned char v; | |
610 | /* | |
611 | * Horizontal: 11 bits, top 8 live in hstart and hstop. Bottom 3 of | |
612 | * hstart are in href[2:0], bottom 3 of hstop in href[5:3]. There is | |
613 | * a mystery "edge offset" value in the top two bits of href. | |
614 | */ | |
615 | ret = ov7670_write(client, REG_HSTART, (hstart >> 3) & 0xff); | |
616 | ret += ov7670_write(client, REG_HSTOP, (hstop >> 3) & 0xff); | |
617 | ret += ov7670_read(client, REG_HREF, &v); | |
618 | v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7); | |
619 | msleep(10); | |
620 | ret += ov7670_write(client, REG_HREF, v); | |
621 | /* | |
622 | * Vertical: similar arrangement, but only 10 bits. | |
623 | */ | |
624 | ret += ov7670_write(client, REG_VSTART, (vstart >> 2) & 0xff); | |
625 | ret += ov7670_write(client, REG_VSTOP, (vstop >> 2) & 0xff); | |
626 | ret += ov7670_read(client, REG_VREF, &v); | |
627 | v = (v & 0xf0) | ((vstop & 0x3) << 2) | (vstart & 0x3); | |
628 | msleep(10); | |
629 | ret += ov7670_write(client, REG_VREF, v); | |
630 | return ret; | |
631 | } | |
632 | ||
633 | ||
634 | static int ov7670_enum_fmt(struct i2c_client *c, struct v4l2_fmtdesc *fmt) | |
635 | { | |
636 | struct ov7670_format_struct *ofmt; | |
637 | ||
638 | if (fmt->index >= N_OV7670_FMTS) | |
639 | return -EINVAL; | |
640 | ||
641 | ofmt = ov7670_formats + fmt->index; | |
642 | fmt->flags = 0; | |
643 | strcpy(fmt->description, ofmt->desc); | |
644 | fmt->pixelformat = ofmt->pixelformat; | |
645 | return 0; | |
646 | } | |
647 | ||
648 | ||
649 | static int ov7670_try_fmt(struct i2c_client *c, struct v4l2_format *fmt, | |
650 | struct ov7670_format_struct **ret_fmt, | |
651 | struct ov7670_win_size **ret_wsize) | |
652 | { | |
653 | int index; | |
654 | struct ov7670_win_size *wsize; | |
655 | struct v4l2_pix_format *pix = &fmt->fmt.pix; | |
656 | ||
657 | for (index = 0; index < N_OV7670_FMTS; index++) | |
658 | if (ov7670_formats[index].pixelformat == pix->pixelformat) | |
659 | break; | |
660 | if (index >= N_OV7670_FMTS) | |
661 | return -EINVAL; | |
662 | if (ret_fmt != NULL) | |
663 | *ret_fmt = ov7670_formats + index; | |
664 | /* | |
665 | * Fields: the OV devices claim to be progressive. | |
666 | */ | |
667 | if (pix->field == V4L2_FIELD_ANY) | |
668 | pix->field = V4L2_FIELD_NONE; | |
669 | else if (pix->field != V4L2_FIELD_NONE) | |
670 | return -EINVAL; | |
671 | /* | |
672 | * Round requested image size down to the nearest | |
673 | * we support, but not below the smallest. | |
674 | */ | |
675 | for (wsize = ov7670_win_sizes; wsize < ov7670_win_sizes + N_WIN_SIZES; | |
676 | wsize++) | |
677 | if (pix->width >= wsize->width && pix->height >= wsize->height) | |
678 | break; | |
f9a76156 | 679 | if (wsize >= ov7670_win_sizes + N_WIN_SIZES) |
111f3356 JC |
680 | wsize--; /* Take the smallest one */ |
681 | if (ret_wsize != NULL) | |
682 | *ret_wsize = wsize; | |
683 | /* | |
684 | * Note the size we'll actually handle. | |
685 | */ | |
686 | pix->width = wsize->width; | |
687 | pix->height = wsize->height; | |
688 | pix->bytesperline = pix->width*BYTES_PER_PIXEL; | |
111f3356 JC |
689 | pix->sizeimage = pix->height*pix->bytesperline; |
690 | return 0; | |
111f3356 JC |
691 | } |
692 | ||
693 | /* | |
694 | * Set a format. | |
695 | */ | |
696 | static int ov7670_s_fmt(struct i2c_client *c, struct v4l2_format *fmt) | |
697 | { | |
698 | int ret; | |
699 | struct ov7670_format_struct *ovfmt; | |
700 | struct ov7670_win_size *wsize; | |
f9a76156 | 701 | struct ov7670_info *info = i2c_get_clientdata(c); |
111f3356 JC |
702 | unsigned char com7; |
703 | ||
704 | ret = ov7670_try_fmt(c, fmt, &ovfmt, &wsize); | |
705 | if (ret) | |
706 | return ret; | |
707 | /* | |
708 | * COM7 is a pain in the ass, it doesn't like to be read then | |
709 | * quickly written afterward. But we have everything we need | |
710 | * to set it absolutely here, as long as the format-specific | |
711 | * register sets list it first. | |
712 | */ | |
713 | com7 = ovfmt->regs[0].value; | |
714 | com7 |= wsize->com7_bit; | |
715 | ov7670_write(c, REG_COM7, com7); | |
716 | /* | |
717 | * Now write the rest of the array. Also store start/stops | |
718 | */ | |
719 | ov7670_write_array(c, ovfmt->regs + 1); | |
720 | ov7670_set_hw(c, wsize->hstart, wsize->hstop, wsize->vstart, | |
721 | wsize->vstop); | |
f9a76156 JC |
722 | ret = 0; |
723 | if (wsize->regs) | |
724 | ret = ov7670_write_array(c, wsize->regs); | |
725 | info->fmt = ovfmt; | |
111f3356 JC |
726 | return 0; |
727 | } | |
728 | ||
c8f5b2f5 JC |
729 | /* |
730 | * Implement G/S_PARM. There is a "high quality" mode we could try | |
731 | * to do someday; for now, we just do the frame rate tweak. | |
732 | */ | |
733 | static int ov7670_g_parm(struct i2c_client *c, struct v4l2_streamparm *parms) | |
734 | { | |
735 | struct v4l2_captureparm *cp = &parms->parm.capture; | |
736 | unsigned char clkrc; | |
737 | int ret; | |
738 | ||
739 | if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) | |
740 | return -EINVAL; | |
741 | ret = ov7670_read(c, REG_CLKRC, &clkrc); | |
742 | if (ret < 0) | |
743 | return ret; | |
744 | memset(cp, 0, sizeof(struct v4l2_captureparm)); | |
745 | cp->capability = V4L2_CAP_TIMEPERFRAME; | |
746 | cp->timeperframe.numerator = 1; | |
747 | cp->timeperframe.denominator = OV7670_FRAME_RATE; | |
748 | if ((clkrc & CLK_EXT) == 0 && (clkrc & CLK_SCALE) > 1) | |
749 | cp->timeperframe.denominator /= (clkrc & CLK_SCALE); | |
750 | return 0; | |
751 | } | |
752 | ||
753 | static int ov7670_s_parm(struct i2c_client *c, struct v4l2_streamparm *parms) | |
754 | { | |
755 | struct v4l2_captureparm *cp = &parms->parm.capture; | |
756 | struct v4l2_fract *tpf = &cp->timeperframe; | |
757 | unsigned char clkrc; | |
758 | int ret, div; | |
759 | ||
760 | if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) | |
761 | return -EINVAL; | |
762 | if (cp->extendedmode != 0) | |
763 | return -EINVAL; | |
764 | /* | |
765 | * CLKRC has a reserved bit, so let's preserve it. | |
766 | */ | |
767 | ret = ov7670_read(c, REG_CLKRC, &clkrc); | |
768 | if (ret < 0) | |
769 | return ret; | |
770 | if (tpf->numerator == 0 || tpf->denominator == 0) | |
771 | div = 1; /* Reset to full rate */ | |
772 | else | |
773 | div = (tpf->numerator*OV7670_FRAME_RATE)/tpf->denominator; | |
774 | if (div == 0) | |
775 | div = 1; | |
776 | else if (div > CLK_SCALE) | |
777 | div = CLK_SCALE; | |
778 | clkrc = (clkrc & 0x80) | div; | |
779 | tpf->numerator = 1; | |
780 | tpf->denominator = OV7670_FRAME_RATE/div; | |
781 | return ov7670_write(c, REG_CLKRC, clkrc); | |
782 | } | |
783 | ||
784 | ||
785 | ||
111f3356 JC |
786 | /* |
787 | * Code for dealing with controls. | |
788 | */ | |
789 | ||
f9a76156 JC |
790 | |
791 | ||
792 | ||
793 | ||
794 | static int ov7670_store_cmatrix(struct i2c_client *client, | |
795 | int matrix[CMATRIX_LEN]) | |
796 | { | |
797 | int i, ret; | |
798 | unsigned char signbits; | |
799 | ||
800 | /* | |
801 | * Weird crap seems to exist in the upper part of | |
802 | * the sign bits register, so let's preserve it. | |
803 | */ | |
804 | ret = ov7670_read(client, REG_CMATRIX_SIGN, &signbits); | |
805 | signbits &= 0xc0; | |
806 | ||
807 | for (i = 0; i < CMATRIX_LEN; i++) { | |
808 | unsigned char raw; | |
809 | ||
810 | if (matrix[i] < 0) { | |
811 | signbits |= (1 << i); | |
812 | if (matrix[i] < -255) | |
813 | raw = 0xff; | |
814 | else | |
815 | raw = (-1 * matrix[i]) & 0xff; | |
816 | } | |
817 | else { | |
818 | if (matrix[i] > 255) | |
819 | raw = 0xff; | |
820 | else | |
821 | raw = matrix[i] & 0xff; | |
822 | } | |
823 | ret += ov7670_write(client, REG_CMATRIX_BASE + i, raw); | |
824 | } | |
825 | ret += ov7670_write(client, REG_CMATRIX_SIGN, signbits); | |
826 | return ret; | |
827 | } | |
828 | ||
829 | ||
830 | /* | |
831 | * Hue also requires messing with the color matrix. It also requires | |
832 | * trig functions, which tend not to be well supported in the kernel. | |
833 | * So here is a simple table of sine values, 0-90 degrees, in steps | |
834 | * of five degrees. Values are multiplied by 1000. | |
835 | * | |
836 | * The following naive approximate trig functions require an argument | |
837 | * carefully limited to -180 <= theta <= 180. | |
838 | */ | |
839 | #define SIN_STEP 5 | |
840 | static const int ov7670_sin_table[] = { | |
841 | 0, 87, 173, 258, 342, 422, | |
842 | 499, 573, 642, 707, 766, 819, | |
843 | 866, 906, 939, 965, 984, 996, | |
844 | 1000 | |
845 | }; | |
846 | ||
847 | static int ov7670_sine(int theta) | |
848 | { | |
849 | int chs = 1; | |
850 | int sine; | |
851 | ||
852 | if (theta < 0) { | |
853 | theta = -theta; | |
854 | chs = -1; | |
855 | } | |
856 | if (theta <= 90) | |
857 | sine = ov7670_sin_table[theta/SIN_STEP]; | |
858 | else { | |
859 | theta -= 90; | |
860 | sine = 1000 - ov7670_sin_table[theta/SIN_STEP]; | |
861 | } | |
862 | return sine*chs; | |
863 | } | |
864 | ||
865 | static int ov7670_cosine(int theta) | |
866 | { | |
867 | theta = 90 - theta; | |
868 | if (theta > 180) | |
869 | theta -= 360; | |
870 | else if (theta < -180) | |
871 | theta += 360; | |
872 | return ov7670_sine(theta); | |
873 | } | |
874 | ||
875 | ||
876 | ||
877 | ||
878 | static void ov7670_calc_cmatrix(struct ov7670_info *info, | |
879 | int matrix[CMATRIX_LEN]) | |
880 | { | |
881 | int i; | |
882 | /* | |
883 | * Apply the current saturation setting first. | |
884 | */ | |
885 | for (i = 0; i < CMATRIX_LEN; i++) | |
886 | matrix[i] = (info->fmt->cmatrix[i]*info->sat) >> 7; | |
887 | /* | |
888 | * Then, if need be, rotate the hue value. | |
889 | */ | |
890 | if (info->hue != 0) { | |
891 | int sinth, costh, tmpmatrix[CMATRIX_LEN]; | |
892 | ||
893 | memcpy(tmpmatrix, matrix, CMATRIX_LEN*sizeof(int)); | |
894 | sinth = ov7670_sine(info->hue); | |
895 | costh = ov7670_cosine(info->hue); | |
896 | ||
897 | matrix[0] = (matrix[3]*sinth + matrix[0]*costh)/1000; | |
898 | matrix[1] = (matrix[4]*sinth + matrix[1]*costh)/1000; | |
899 | matrix[2] = (matrix[5]*sinth + matrix[2]*costh)/1000; | |
900 | matrix[3] = (matrix[3]*costh - matrix[0]*sinth)/1000; | |
901 | matrix[4] = (matrix[4]*costh - matrix[1]*sinth)/1000; | |
902 | matrix[5] = (matrix[5]*costh - matrix[2]*sinth)/1000; | |
903 | } | |
904 | } | |
905 | ||
906 | ||
907 | ||
908 | static int ov7670_t_sat(struct i2c_client *client, int value) | |
909 | { | |
910 | struct ov7670_info *info = i2c_get_clientdata(client); | |
911 | int matrix[CMATRIX_LEN]; | |
912 | int ret; | |
913 | ||
914 | info->sat = value; | |
915 | ov7670_calc_cmatrix(info, matrix); | |
916 | ret = ov7670_store_cmatrix(client, matrix); | |
917 | return ret; | |
918 | } | |
919 | ||
920 | static int ov7670_q_sat(struct i2c_client *client, __s32 *value) | |
921 | { | |
922 | struct ov7670_info *info = i2c_get_clientdata(client); | |
923 | ||
924 | *value = info->sat; | |
925 | return 0; | |
926 | } | |
927 | ||
928 | static int ov7670_t_hue(struct i2c_client *client, int value) | |
929 | { | |
930 | struct ov7670_info *info = i2c_get_clientdata(client); | |
931 | int matrix[CMATRIX_LEN]; | |
932 | int ret; | |
933 | ||
934 | if (value < -180 || value > 180) | |
935 | return -EINVAL; | |
936 | info->hue = value; | |
937 | ov7670_calc_cmatrix(info, matrix); | |
938 | ret = ov7670_store_cmatrix(client, matrix); | |
939 | return ret; | |
940 | } | |
941 | ||
942 | ||
943 | static int ov7670_q_hue(struct i2c_client *client, __s32 *value) | |
944 | { | |
945 | struct ov7670_info *info = i2c_get_clientdata(client); | |
946 | ||
947 | *value = info->hue; | |
948 | return 0; | |
949 | } | |
950 | ||
951 | ||
111f3356 JC |
952 | /* |
953 | * Some weird registers seem to store values in a sign/magnitude format! | |
954 | */ | |
955 | static unsigned char ov7670_sm_to_abs(unsigned char v) | |
956 | { | |
957 | if ((v & 0x80) == 0) | |
958 | return v + 128; | |
959 | else | |
960 | return 128 - (v & 0x7f); | |
961 | } | |
962 | ||
963 | ||
964 | static unsigned char ov7670_abs_to_sm(unsigned char v) | |
965 | { | |
966 | if (v > 127) | |
967 | return v & 0x7f; | |
968 | else | |
969 | return (128 - v) | 0x80; | |
970 | } | |
971 | ||
f9a76156 | 972 | static int ov7670_t_brightness(struct i2c_client *client, int value) |
111f3356 | 973 | { |
f9a76156 | 974 | unsigned char com8, v; |
111f3356 JC |
975 | int ret; |
976 | ||
977 | ov7670_read(client, REG_COM8, &com8); | |
978 | com8 &= ~COM8_AEC; | |
979 | ov7670_write(client, REG_COM8, com8); | |
f9a76156 JC |
980 | v = ov7670_abs_to_sm(value); |
981 | ret = ov7670_write(client, REG_BRIGHT, v); | |
111f3356 JC |
982 | return ret; |
983 | } | |
984 | ||
f9a76156 | 985 | static int ov7670_q_brightness(struct i2c_client *client, __s32 *value) |
111f3356 | 986 | { |
f9a76156 JC |
987 | unsigned char v; |
988 | int ret = ov7670_read(client, REG_BRIGHT, &v); | |
989 | ||
990 | *value = ov7670_sm_to_abs(v); | |
111f3356 JC |
991 | return ret; |
992 | } | |
993 | ||
f9a76156 | 994 | static int ov7670_t_contrast(struct i2c_client *client, int value) |
111f3356 | 995 | { |
f9a76156 | 996 | return ov7670_write(client, REG_CONTRAS, (unsigned char) value); |
111f3356 JC |
997 | } |
998 | ||
f9a76156 | 999 | static int ov7670_q_contrast(struct i2c_client *client, __s32 *value) |
111f3356 | 1000 | { |
f9a76156 JC |
1001 | unsigned char v; |
1002 | int ret = ov7670_read(client, REG_CONTRAS, &v); | |
1003 | ||
1004 | *value = v; | |
1005 | return ret; | |
111f3356 JC |
1006 | } |
1007 | ||
f9a76156 | 1008 | static int ov7670_q_hflip(struct i2c_client *client, __s32 *value) |
111f3356 JC |
1009 | { |
1010 | int ret; | |
1011 | unsigned char v; | |
1012 | ||
1013 | ret = ov7670_read(client, REG_MVFP, &v); | |
1014 | *value = (v & MVFP_MIRROR) == MVFP_MIRROR; | |
1015 | return ret; | |
1016 | } | |
1017 | ||
1018 | ||
f9a76156 | 1019 | static int ov7670_t_hflip(struct i2c_client *client, int value) |
111f3356 JC |
1020 | { |
1021 | unsigned char v; | |
1022 | int ret; | |
1023 | ||
1024 | ret = ov7670_read(client, REG_MVFP, &v); | |
1025 | if (value) | |
1026 | v |= MVFP_MIRROR; | |
1027 | else | |
1028 | v &= ~MVFP_MIRROR; | |
1029 | msleep(10); /* FIXME */ | |
1030 | ret += ov7670_write(client, REG_MVFP, v); | |
1031 | return ret; | |
1032 | } | |
1033 | ||
1034 | ||
1035 | ||
f9a76156 | 1036 | static int ov7670_q_vflip(struct i2c_client *client, __s32 *value) |
111f3356 JC |
1037 | { |
1038 | int ret; | |
1039 | unsigned char v; | |
1040 | ||
1041 | ret = ov7670_read(client, REG_MVFP, &v); | |
1042 | *value = (v & MVFP_FLIP) == MVFP_FLIP; | |
1043 | return ret; | |
1044 | } | |
1045 | ||
1046 | ||
f9a76156 | 1047 | static int ov7670_t_vflip(struct i2c_client *client, int value) |
111f3356 JC |
1048 | { |
1049 | unsigned char v; | |
1050 | int ret; | |
1051 | ||
1052 | ret = ov7670_read(client, REG_MVFP, &v); | |
1053 | if (value) | |
1054 | v |= MVFP_FLIP; | |
1055 | else | |
1056 | v &= ~MVFP_FLIP; | |
1057 | msleep(10); /* FIXME */ | |
1058 | ret += ov7670_write(client, REG_MVFP, v); | |
1059 | return ret; | |
1060 | } | |
1061 | ||
1062 | ||
1063 | static struct ov7670_control { | |
1064 | struct v4l2_queryctrl qc; | |
f9a76156 JC |
1065 | int (*query)(struct i2c_client *c, __s32 *value); |
1066 | int (*tweak)(struct i2c_client *c, int value); | |
111f3356 JC |
1067 | } ov7670_controls[] = |
1068 | { | |
1069 | { | |
1070 | .qc = { | |
1071 | .id = V4L2_CID_BRIGHTNESS, | |
1072 | .type = V4L2_CTRL_TYPE_INTEGER, | |
1073 | .name = "Brightness", | |
1074 | .minimum = 0, | |
1075 | .maximum = 255, | |
1076 | .step = 1, | |
1077 | .default_value = 0x80, | |
1078 | .flags = V4L2_CTRL_FLAG_SLIDER | |
1079 | }, | |
1080 | .tweak = ov7670_t_brightness, | |
1081 | .query = ov7670_q_brightness, | |
1082 | }, | |
1083 | { | |
1084 | .qc = { | |
1085 | .id = V4L2_CID_CONTRAST, | |
1086 | .type = V4L2_CTRL_TYPE_INTEGER, | |
1087 | .name = "Contrast", | |
1088 | .minimum = 0, | |
1089 | .maximum = 127, | |
1090 | .step = 1, | |
1091 | .default_value = 0x40, /* XXX ov7670 spec */ | |
1092 | .flags = V4L2_CTRL_FLAG_SLIDER | |
1093 | }, | |
1094 | .tweak = ov7670_t_contrast, | |
1095 | .query = ov7670_q_contrast, | |
1096 | }, | |
f9a76156 JC |
1097 | { |
1098 | .qc = { | |
1099 | .id = V4L2_CID_SATURATION, | |
1100 | .type = V4L2_CTRL_TYPE_INTEGER, | |
1101 | .name = "Saturation", | |
1102 | .minimum = 0, | |
1103 | .maximum = 256, | |
1104 | .step = 1, | |
1105 | .default_value = 0x80, | |
1106 | .flags = V4L2_CTRL_FLAG_SLIDER | |
1107 | }, | |
1108 | .tweak = ov7670_t_sat, | |
1109 | .query = ov7670_q_sat, | |
1110 | }, | |
1111 | { | |
1112 | .qc = { | |
1113 | .id = V4L2_CID_HUE, | |
1114 | .type = V4L2_CTRL_TYPE_INTEGER, | |
1115 | .name = "HUE", | |
1116 | .minimum = -180, | |
1117 | .maximum = 180, | |
1118 | .step = 5, | |
1119 | .default_value = 0, | |
1120 | .flags = V4L2_CTRL_FLAG_SLIDER | |
1121 | }, | |
1122 | .tweak = ov7670_t_hue, | |
1123 | .query = ov7670_q_hue, | |
1124 | }, | |
111f3356 JC |
1125 | { |
1126 | .qc = { | |
1127 | .id = V4L2_CID_VFLIP, | |
1128 | .type = V4L2_CTRL_TYPE_BOOLEAN, | |
1129 | .name = "Vertical flip", | |
1130 | .minimum = 0, | |
1131 | .maximum = 1, | |
1132 | .step = 1, | |
1133 | .default_value = 0, | |
1134 | }, | |
1135 | .tweak = ov7670_t_vflip, | |
1136 | .query = ov7670_q_vflip, | |
1137 | }, | |
1138 | { | |
1139 | .qc = { | |
1140 | .id = V4L2_CID_HFLIP, | |
1141 | .type = V4L2_CTRL_TYPE_BOOLEAN, | |
1142 | .name = "Horizontal mirror", | |
1143 | .minimum = 0, | |
1144 | .maximum = 1, | |
1145 | .step = 1, | |
1146 | .default_value = 0, | |
1147 | }, | |
1148 | .tweak = ov7670_t_hflip, | |
1149 | .query = ov7670_q_hflip, | |
1150 | }, | |
1151 | }; | |
1152 | #define N_CONTROLS (sizeof(ov7670_controls)/sizeof(ov7670_controls[0])) | |
1153 | ||
1154 | static struct ov7670_control *ov7670_find_control(__u32 id) | |
1155 | { | |
1156 | int i; | |
1157 | ||
1158 | for (i = 0; i < N_CONTROLS; i++) | |
1159 | if (ov7670_controls[i].qc.id == id) | |
1160 | return ov7670_controls + i; | |
1161 | return NULL; | |
1162 | } | |
1163 | ||
1164 | ||
1165 | static int ov7670_queryctrl(struct i2c_client *client, | |
1166 | struct v4l2_queryctrl *qc) | |
1167 | { | |
1168 | struct ov7670_control *ctrl = ov7670_find_control(qc->id); | |
1169 | ||
1170 | if (ctrl == NULL) | |
1171 | return -EINVAL; | |
1172 | *qc = ctrl->qc; | |
1173 | return 0; | |
1174 | } | |
1175 | ||
1176 | static int ov7670_g_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) | |
1177 | { | |
1178 | struct ov7670_control *octrl = ov7670_find_control(ctrl->id); | |
1179 | int ret; | |
111f3356 JC |
1180 | |
1181 | if (octrl == NULL) | |
1182 | return -EINVAL; | |
f9a76156 JC |
1183 | ret = octrl->query(client, &ctrl->value); |
1184 | if (ret >= 0) | |
111f3356 | 1185 | return 0; |
111f3356 JC |
1186 | return ret; |
1187 | } | |
1188 | ||
1189 | static int ov7670_s_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) | |
1190 | { | |
1191 | struct ov7670_control *octrl = ov7670_find_control(ctrl->id); | |
f9a76156 | 1192 | int ret; |
111f3356 JC |
1193 | |
1194 | if (octrl == NULL) | |
1195 | return -EINVAL; | |
f9a76156 JC |
1196 | ret = octrl->tweak(client, ctrl->value); |
1197 | if (ret >= 0) | |
1198 | return 0; | |
1199 | return ret; | |
111f3356 JC |
1200 | } |
1201 | ||
1202 | ||
1203 | ||
1204 | ||
1205 | ||
1206 | ||
111f3356 JC |
1207 | /* |
1208 | * Basic i2c stuff. | |
1209 | */ | |
1210 | static struct i2c_driver ov7670_driver; | |
1211 | ||
1212 | static int ov7670_attach(struct i2c_adapter *adapter) | |
1213 | { | |
1214 | int ret; | |
1215 | struct i2c_client *client; | |
f9a76156 | 1216 | struct ov7670_info *info; |
111f3356 | 1217 | |
111f3356 JC |
1218 | /* |
1219 | * For now: only deal with adapters we recognize. | |
1220 | */ | |
1221 | if (adapter->id != I2C_HW_SMBUS_CAFE) | |
1222 | return -ENODEV; | |
1223 | ||
111f3356 JC |
1224 | client = kzalloc(sizeof (struct i2c_client), GFP_KERNEL); |
1225 | if (! client) | |
1226 | return -ENOMEM; | |
1227 | client->adapter = adapter; | |
1228 | client->addr = OV7670_I2C_ADDR; | |
1229 | client->driver = &ov7670_driver, | |
1230 | strcpy(client->name, "OV7670"); | |
f9a76156 JC |
1231 | /* |
1232 | * Set up our info structure. | |
1233 | */ | |
1234 | info = kzalloc(sizeof (struct ov7670_info), GFP_KERNEL); | |
1235 | if (! info) { | |
1236 | ret = -ENOMEM; | |
1237 | goto out_free; | |
1238 | } | |
1239 | info->fmt = &ov7670_formats[0]; | |
1240 | info->sat = 128; /* Review this */ | |
1241 | i2c_set_clientdata(client, info); | |
111f3356 JC |
1242 | |
1243 | /* | |
1244 | * Make sure it's an ov7670 | |
1245 | */ | |
1246 | ret = ov7670_detect(client); | |
111f3356 | 1247 | if (ret) |
f9a76156 | 1248 | goto out_free_info; |
111f3356 JC |
1249 | i2c_attach_client(client); |
1250 | return 0; | |
1251 | ||
f9a76156 JC |
1252 | out_free_info: |
1253 | kfree(info); | |
111f3356 JC |
1254 | out_free: |
1255 | kfree(client); | |
1256 | return ret; | |
1257 | } | |
1258 | ||
1259 | ||
1260 | static int ov7670_detach(struct i2c_client *client) | |
1261 | { | |
1262 | i2c_detach_client(client); | |
f9a76156 | 1263 | kfree(i2c_get_clientdata(client)); |
111f3356 JC |
1264 | kfree(client); |
1265 | return 0; | |
1266 | } | |
1267 | ||
1268 | ||
1269 | static int ov7670_command(struct i2c_client *client, unsigned int cmd, | |
1270 | void *arg) | |
1271 | { | |
1272 | switch (cmd) { | |
1273 | case VIDIOC_INT_G_CHIP_IDENT: | |
1274 | * (enum v4l2_chip_ident *) arg = V4L2_IDENT_OV7670; | |
1275 | return 0; | |
1276 | ||
1277 | case VIDIOC_INT_RESET: | |
1278 | ov7670_reset(client); | |
1279 | return 0; | |
1280 | ||
1281 | case VIDIOC_INT_INIT: | |
1282 | return ov7670_init(client); | |
1283 | ||
1284 | case VIDIOC_ENUM_FMT: | |
1285 | return ov7670_enum_fmt(client, (struct v4l2_fmtdesc *) arg); | |
1286 | case VIDIOC_TRY_FMT: | |
1287 | return ov7670_try_fmt(client, (struct v4l2_format *) arg, NULL, NULL); | |
1288 | case VIDIOC_S_FMT: | |
1289 | return ov7670_s_fmt(client, (struct v4l2_format *) arg); | |
1290 | case VIDIOC_QUERYCTRL: | |
1291 | return ov7670_queryctrl(client, (struct v4l2_queryctrl *) arg); | |
1292 | case VIDIOC_S_CTRL: | |
1293 | return ov7670_s_ctrl(client, (struct v4l2_control *) arg); | |
1294 | case VIDIOC_G_CTRL: | |
1295 | return ov7670_g_ctrl(client, (struct v4l2_control *) arg); | |
c8f5b2f5 JC |
1296 | case VIDIOC_S_PARM: |
1297 | return ov7670_s_parm(client, (struct v4l2_streamparm *) arg); | |
1298 | case VIDIOC_G_PARM: | |
1299 | return ov7670_g_parm(client, (struct v4l2_streamparm *) arg); | |
111f3356 JC |
1300 | } |
1301 | return -EINVAL; | |
1302 | } | |
1303 | ||
1304 | ||
1305 | ||
1306 | static struct i2c_driver ov7670_driver = { | |
1307 | .driver = { | |
1308 | .name = "ov7670", | |
1309 | }, | |
1310 | .id = I2C_DRIVERID_OV7670, | |
1311 | .class = I2C_CLASS_CAM_DIGITAL, | |
1312 | .attach_adapter = ov7670_attach, | |
1313 | .detach_client = ov7670_detach, | |
1314 | .command = ov7670_command, | |
1315 | }; | |
1316 | ||
1317 | ||
1318 | /* | |
1319 | * Module initialization | |
1320 | */ | |
1321 | static int __init ov7670_mod_init(void) | |
1322 | { | |
1323 | printk(KERN_NOTICE "OmniVision ov7670 sensor driver, at your service\n"); | |
1324 | return i2c_add_driver(&ov7670_driver); | |
1325 | } | |
1326 | ||
1327 | static void __exit ov7670_mod_exit(void) | |
1328 | { | |
1329 | i2c_del_driver(&ov7670_driver); | |
1330 | } | |
1331 | ||
1332 | module_init(ov7670_mod_init); | |
1333 | module_exit(ov7670_mod_exit); |