]>
Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
1da177e4 LT |
2 | * |
3 | * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] | |
4 | * | |
86ddd96f MCC |
5 | * Extended 3 / 2005 by Hartmut Hackmann to support various |
6 | * cards with the tda10046 DVB-T channel decoder | |
7 | * | |
1da177e4 LT |
8 | * This program is free software; you can redistribute it and/or modify |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation; either version 2 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
21 | */ | |
22 | ||
23 | #include <linux/init.h> | |
24 | #include <linux/list.h> | |
25 | #include <linux/module.h> | |
26 | #include <linux/kernel.h> | |
27 | #include <linux/slab.h> | |
28 | #include <linux/delay.h> | |
29 | #include <linux/kthread.h> | |
30 | #include <linux/suspend.h> | |
31 | ||
32 | #include "saa7134-reg.h" | |
33 | #include "saa7134.h" | |
5e453dc7 | 34 | #include <media/v4l2-common.h> |
a78d0bfa | 35 | #include "dvb-pll.h" |
5823b3a6 | 36 | #include <dvb_frontend.h> |
1da177e4 | 37 | |
1f10c7af AQ |
38 | #include "mt352.h" |
39 | #include "mt352_priv.h" /* FIXME */ | |
40 | #include "tda1004x.h" | |
41 | #include "nxt200x.h" | |
bc36a686 | 42 | #include "tuner-xc2028.h" |
1da177e4 | 43 | |
e2ac28fa IL |
44 | #include "tda10086.h" |
45 | #include "tda826x.h" | |
8ce47dad | 46 | #include "tda827x.h" |
e2ac28fa | 47 | #include "isl6421.h" |
4b1431ca | 48 | #include "isl6405.h" |
6ab465a8 | 49 | #include "lnbp21.h" |
cb89cd33 | 50 | #include "tuner-simple.h" |
8ce47dad | 51 | |
1da177e4 LT |
52 | MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); |
53 | MODULE_LICENSE("GPL"); | |
54 | ||
ff699e6b | 55 | static unsigned int antenna_pwr; |
86ddd96f | 56 | |
1da177e4 LT |
57 | module_param(antenna_pwr, int, 0444); |
58 | MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)"); | |
59 | ||
ff699e6b | 60 | static int use_frontend; |
b331daa0 SB |
61 | module_param(use_frontend, int, 0644); |
62 | MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)"); | |
1f683cd8 | 63 | |
ff699e6b | 64 | static int debug; |
58ef4f92 HH |
65 | module_param(debug, int, 0644); |
66 | MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off)."); | |
67 | ||
78e92006 JG |
68 | DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
69 | ||
cf3c34c8 TP |
70 | #define dprintk(fmt, arg...) do { if (debug) \ |
71 | printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0) | |
72 | ||
73 | /* Print a warning */ | |
74 | #define wprintk(fmt, arg...) \ | |
75 | printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg) | |
58ef4f92 HH |
76 | |
77 | /* ------------------------------------------------------------------ | |
78 | * mt352 based DVB-T cards | |
79 | */ | |
80 | ||
1da177e4 LT |
81 | static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) |
82 | { | |
83 | u32 ok; | |
84 | ||
85 | if (!on) { | |
86 | saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); | |
87 | saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); | |
88 | return 0; | |
89 | } | |
90 | ||
91 | saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); | |
92 | saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); | |
93 | udelay(10); | |
94 | ||
95 | saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28)); | |
96 | saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); | |
97 | udelay(10); | |
98 | saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); | |
99 | udelay(10); | |
100 | ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27); | |
5823b3a6 | 101 | dprintk("%s %s\n", __func__, ok ? "on" : "off"); |
1da177e4 LT |
102 | |
103 | if (!ok) | |
104 | saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); | |
105 | return ok; | |
106 | } | |
107 | ||
108 | static int mt352_pinnacle_init(struct dvb_frontend* fe) | |
109 | { | |
110 | static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 }; | |
111 | static u8 reset [] = { RESET, 0x80 }; | |
112 | static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; | |
113 | static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; | |
114 | static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 }; | |
115 | static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 }; | |
116 | static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f }; | |
117 | static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d }; | |
118 | static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 }; | |
119 | struct saa7134_dev *dev= fe->dvb->priv; | |
120 | ||
5823b3a6 | 121 | dprintk("%s called\n", __func__); |
1da177e4 LT |
122 | |
123 | mt352_write(fe, clock_config, sizeof(clock_config)); | |
124 | udelay(200); | |
125 | mt352_write(fe, reset, sizeof(reset)); | |
126 | mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); | |
127 | mt352_write(fe, agc_cfg, sizeof(agc_cfg)); | |
128 | mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); | |
129 | mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); | |
130 | ||
131 | mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg)); | |
132 | mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg)); | |
133 | mt352_write(fe, irq_cfg, sizeof(irq_cfg)); | |
df8cf706 | 134 | |
1da177e4 LT |
135 | return 0; |
136 | } | |
137 | ||
a78d0bfa JAR |
138 | static int mt352_aver777_init(struct dvb_frontend* fe) |
139 | { | |
140 | static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; | |
141 | static u8 reset [] = { RESET, 0x80 }; | |
142 | static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; | |
143 | static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; | |
144 | static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; | |
145 | ||
146 | mt352_write(fe, clock_config, sizeof(clock_config)); | |
147 | udelay(200); | |
148 | mt352_write(fe, reset, sizeof(reset)); | |
149 | mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); | |
150 | mt352_write(fe, agc_cfg, sizeof(agc_cfg)); | |
151 | mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); | |
152 | ||
153 | return 0; | |
154 | } | |
155 | ||
6e501a3f | 156 | static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe) |
95a2fdb6 | 157 | { |
6e501a3f TF |
158 | static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; |
159 | static u8 reset [] = { RESET, 0x80 }; | |
160 | static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; | |
161 | static u8 agc_cfg [] = { AGC_TARGET, 0xe }; | |
95a2fdb6 MCC |
162 | static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; |
163 | ||
164 | mt352_write(fe, clock_config, sizeof(clock_config)); | |
165 | udelay(200); | |
166 | mt352_write(fe, reset, sizeof(reset)); | |
167 | mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); | |
168 | mt352_write(fe, agc_cfg, sizeof(agc_cfg)); | |
169 | mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); | |
95a2fdb6 MCC |
170 | return 0; |
171 | } | |
172 | ||
0463f12c AQ |
173 | static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe, |
174 | struct dvb_frontend_parameters* params) | |
1da177e4 | 175 | { |
df8cf706 HH |
176 | u8 off[] = { 0x00, 0xf1}; |
177 | u8 on[] = { 0x00, 0x71}; | |
178 | struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)}; | |
179 | ||
1da177e4 LT |
180 | struct saa7134_dev *dev = fe->dvb->priv; |
181 | struct v4l2_frequency f; | |
182 | ||
183 | /* set frequency (mt2050) */ | |
184 | f.tuner = 0; | |
185 | f.type = V4L2_TUNER_DIGITAL_TV; | |
186 | f.frequency = params->frequency / 1000 * 16 / 1000; | |
dea74869 PB |
187 | if (fe->ops.i2c_gate_ctrl) |
188 | fe->ops.i2c_gate_ctrl(fe, 1); | |
df8cf706 | 189 | i2c_transfer(&dev->i2c_adap, &msg, 1); |
1da177e4 | 190 | saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f); |
df8cf706 | 191 | msg.buf = on; |
dea74869 PB |
192 | if (fe->ops.i2c_gate_ctrl) |
193 | fe->ops.i2c_gate_ctrl(fe, 1); | |
df8cf706 | 194 | i2c_transfer(&dev->i2c_adap, &msg, 1); |
1da177e4 LT |
195 | |
196 | pinnacle_antenna_pwr(dev, antenna_pwr); | |
197 | ||
198 | /* mt352 setup */ | |
0463f12c | 199 | return mt352_pinnacle_init(fe); |
1da177e4 LT |
200 | } |
201 | ||
202 | static struct mt352_config pinnacle_300i = { | |
203 | .demod_address = 0x3c >> 1, | |
204 | .adc_clock = 20333, | |
205 | .if2 = 36150, | |
206 | .no_tuner = 1, | |
207 | .demod_init = mt352_pinnacle_init, | |
1da177e4 | 208 | }; |
a78d0bfa JAR |
209 | |
210 | static struct mt352_config avermedia_777 = { | |
211 | .demod_address = 0xf, | |
212 | .demod_init = mt352_aver777_init, | |
a78d0bfa | 213 | }; |
1da177e4 | 214 | |
6e501a3f | 215 | static struct mt352_config avermedia_xc3028_mt352_dev = { |
bc36a686 MCC |
216 | .demod_address = (0x1e >> 1), |
217 | .no_tuner = 1, | |
6e501a3f | 218 | .demod_init = mt352_avermedia_xc3028_init, |
bc36a686 MCC |
219 | }; |
220 | ||
58ef4f92 HH |
221 | /* ================================================================== |
222 | * tda1004x based DVB-T cards, helper functions | |
223 | */ | |
224 | ||
225 | static int philips_tda1004x_request_firmware(struct dvb_frontend *fe, | |
226 | const struct firmware **fw, char *name) | |
1da177e4 LT |
227 | { |
228 | struct saa7134_dev *dev = fe->dvb->priv; | |
58ef4f92 HH |
229 | return request_firmware(fw, name, &dev->pci->dev); |
230 | } | |
231 | ||
58ef4f92 HH |
232 | /* ------------------------------------------------------------------ |
233 | * these tuners are tu1216, td1316(a) | |
234 | */ | |
235 | ||
236 | static int philips_tda6651_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) | |
237 | { | |
238 | struct saa7134_dev *dev = fe->dvb->priv; | |
239 | struct tda1004x_state *state = fe->demodulator_priv; | |
240 | u8 addr = state->config->tuner_address; | |
86ddd96f | 241 | u8 tuner_buf[4]; |
2cf36ac4 | 242 | struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len = |
86ddd96f MCC |
243 | sizeof(tuner_buf) }; |
244 | int tuner_frequency = 0; | |
245 | u8 band, cp, filter; | |
246 | ||
247 | /* determine charge pump */ | |
248 | tuner_frequency = params->frequency + 36166000; | |
249 | if (tuner_frequency < 87000000) | |
250 | return -EINVAL; | |
251 | else if (tuner_frequency < 130000000) | |
252 | cp = 3; | |
253 | else if (tuner_frequency < 160000000) | |
254 | cp = 5; | |
255 | else if (tuner_frequency < 200000000) | |
256 | cp = 6; | |
257 | else if (tuner_frequency < 290000000) | |
258 | cp = 3; | |
259 | else if (tuner_frequency < 420000000) | |
260 | cp = 5; | |
261 | else if (tuner_frequency < 480000000) | |
262 | cp = 6; | |
263 | else if (tuner_frequency < 620000000) | |
264 | cp = 3; | |
265 | else if (tuner_frequency < 830000000) | |
266 | cp = 5; | |
267 | else if (tuner_frequency < 895000000) | |
268 | cp = 7; | |
269 | else | |
270 | return -EINVAL; | |
271 | ||
272 | /* determine band */ | |
273 | if (params->frequency < 49000000) | |
274 | return -EINVAL; | |
275 | else if (params->frequency < 161000000) | |
276 | band = 1; | |
277 | else if (params->frequency < 444000000) | |
278 | band = 2; | |
279 | else if (params->frequency < 861000000) | |
280 | band = 4; | |
281 | else | |
282 | return -EINVAL; | |
283 | ||
284 | /* setup PLL filter */ | |
285 | switch (params->u.ofdm.bandwidth) { | |
286 | case BANDWIDTH_6_MHZ: | |
287 | filter = 0; | |
288 | break; | |
289 | ||
290 | case BANDWIDTH_7_MHZ: | |
291 | filter = 0; | |
292 | break; | |
293 | ||
294 | case BANDWIDTH_8_MHZ: | |
295 | filter = 1; | |
296 | break; | |
1da177e4 | 297 | |
86ddd96f MCC |
298 | default: |
299 | return -EINVAL; | |
300 | } | |
301 | ||
302 | /* calculate divisor | |
303 | * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) | |
1da177e4 | 304 | */ |
86ddd96f MCC |
305 | tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000; |
306 | ||
307 | /* setup tuner buffer */ | |
308 | tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; | |
309 | tuner_buf[1] = tuner_frequency & 0xff; | |
310 | tuner_buf[2] = 0xca; | |
311 | tuner_buf[3] = (cp << 5) | (filter << 3) | band; | |
312 | ||
dea74869 PB |
313 | if (fe->ops.i2c_gate_ctrl) |
314 | fe->ops.i2c_gate_ctrl(fe, 1); | |
58ef4f92 | 315 | if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) { |
cf3c34c8 TP |
316 | wprintk("could not write to tuner at addr: 0x%02x\n", |
317 | addr << 1); | |
86ddd96f | 318 | return -EIO; |
58ef4f92 | 319 | } |
2cf36ac4 HH |
320 | msleep(1); |
321 | return 0; | |
322 | } | |
323 | ||
58ef4f92 | 324 | static int philips_tu1216_init(struct dvb_frontend *fe) |
2cf36ac4 HH |
325 | { |
326 | struct saa7134_dev *dev = fe->dvb->priv; | |
58ef4f92 HH |
327 | struct tda1004x_state *state = fe->demodulator_priv; |
328 | u8 addr = state->config->tuner_address; | |
2cf36ac4 HH |
329 | static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; |
330 | struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; | |
86ddd96f | 331 | |
2cf36ac4 | 332 | /* setup PLL configuration */ |
dea74869 PB |
333 | if (fe->ops.i2c_gate_ctrl) |
334 | fe->ops.i2c_gate_ctrl(fe, 1); | |
2cf36ac4 HH |
335 | if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) |
336 | return -EIO; | |
86ddd96f | 337 | msleep(1); |
2cf36ac4 | 338 | |
1da177e4 LT |
339 | return 0; |
340 | } | |
341 | ||
2cf36ac4 HH |
342 | /* ------------------------------------------------------------------ */ |
343 | ||
2cf36ac4 | 344 | static struct tda1004x_config philips_tu1216_60_config = { |
86ddd96f MCC |
345 | .demod_address = 0x8, |
346 | .invert = 1, | |
2cf36ac4 | 347 | .invert_oclk = 0, |
86ddd96f MCC |
348 | .xtal_freq = TDA10046_XTAL_4M, |
349 | .agc_config = TDA10046_AGC_DEFAULT, | |
350 | .if_freq = TDA10046_FREQ_3617, | |
58ef4f92 HH |
351 | .tuner_address = 0x60, |
352 | .request_firmware = philips_tda1004x_request_firmware | |
86ddd96f MCC |
353 | }; |
354 | ||
2cf36ac4 HH |
355 | static struct tda1004x_config philips_tu1216_61_config = { |
356 | ||
357 | .demod_address = 0x8, | |
358 | .invert = 1, | |
359 | .invert_oclk = 0, | |
360 | .xtal_freq = TDA10046_XTAL_4M, | |
361 | .agc_config = TDA10046_AGC_DEFAULT, | |
362 | .if_freq = TDA10046_FREQ_3617, | |
58ef4f92 HH |
363 | .tuner_address = 0x61, |
364 | .request_firmware = philips_tda1004x_request_firmware | |
2cf36ac4 HH |
365 | }; |
366 | ||
367 | /* ------------------------------------------------------------------ */ | |
368 | ||
cbb94521 | 369 | static int philips_td1316_tuner_init(struct dvb_frontend *fe) |
2cf36ac4 HH |
370 | { |
371 | struct saa7134_dev *dev = fe->dvb->priv; | |
58ef4f92 HH |
372 | struct tda1004x_state *state = fe->demodulator_priv; |
373 | u8 addr = state->config->tuner_address; | |
2cf36ac4 | 374 | static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab }; |
58ef4f92 | 375 | struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; |
2cf36ac4 HH |
376 | |
377 | /* setup PLL configuration */ | |
dea74869 PB |
378 | if (fe->ops.i2c_gate_ctrl) |
379 | fe->ops.i2c_gate_ctrl(fe, 1); | |
2cf36ac4 HH |
380 | if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) |
381 | return -EIO; | |
2cf36ac4 HH |
382 | return 0; |
383 | } | |
384 | ||
a79ddae9 | 385 | static int philips_td1316_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) |
2cf36ac4 | 386 | { |
58ef4f92 HH |
387 | return philips_tda6651_pll_set(fe, params); |
388 | } | |
389 | ||
390 | static int philips_td1316_tuner_sleep(struct dvb_frontend *fe) | |
391 | { | |
392 | struct saa7134_dev *dev = fe->dvb->priv; | |
393 | struct tda1004x_state *state = fe->demodulator_priv; | |
394 | u8 addr = state->config->tuner_address; | |
395 | static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 }; | |
396 | struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; | |
397 | ||
398 | /* switch the tuner to analog mode */ | |
399 | if (fe->ops.i2c_gate_ctrl) | |
400 | fe->ops.i2c_gate_ctrl(fe, 1); | |
401 | if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1) | |
402 | return -EIO; | |
403 | return 0; | |
2cf36ac4 HH |
404 | } |
405 | ||
58ef4f92 HH |
406 | /* ------------------------------------------------------------------ */ |
407 | ||
cbb94521 HH |
408 | static int philips_europa_tuner_init(struct dvb_frontend *fe) |
409 | { | |
410 | struct saa7134_dev *dev = fe->dvb->priv; | |
411 | static u8 msg[] = { 0x00, 0x40}; | |
412 | struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; | |
413 | ||
414 | ||
415 | if (philips_td1316_tuner_init(fe)) | |
416 | return -EIO; | |
417 | msleep(1); | |
418 | if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) | |
419 | return -EIO; | |
420 | ||
421 | return 0; | |
422 | } | |
423 | ||
a79ddae9 | 424 | static int philips_europa_tuner_sleep(struct dvb_frontend *fe) |
2cf36ac4 HH |
425 | { |
426 | struct saa7134_dev *dev = fe->dvb->priv; | |
2cf36ac4 | 427 | |
58ef4f92 HH |
428 | static u8 msg[] = { 0x00, 0x14 }; |
429 | struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; | |
430 | ||
431 | if (philips_td1316_tuner_sleep(fe)) | |
432 | return -EIO; | |
2cf36ac4 HH |
433 | |
434 | /* switch the board to analog mode */ | |
dea74869 PB |
435 | if (fe->ops.i2c_gate_ctrl) |
436 | fe->ops.i2c_gate_ctrl(fe, 1); | |
2cf36ac4 | 437 | i2c_transfer(&dev->i2c_adap, &analog_msg, 1); |
a79ddae9 AQ |
438 | return 0; |
439 | } | |
440 | ||
441 | static int philips_europa_demod_sleep(struct dvb_frontend *fe) | |
442 | { | |
443 | struct saa7134_dev *dev = fe->dvb->priv; | |
444 | ||
445 | if (dev->original_demod_sleep) | |
446 | dev->original_demod_sleep(fe); | |
dea74869 | 447 | fe->ops.i2c_gate_ctrl(fe, 1); |
a79ddae9 | 448 | return 0; |
2cf36ac4 HH |
449 | } |
450 | ||
451 | static struct tda1004x_config philips_europa_config = { | |
452 | ||
453 | .demod_address = 0x8, | |
454 | .invert = 0, | |
455 | .invert_oclk = 0, | |
456 | .xtal_freq = TDA10046_XTAL_4M, | |
457 | .agc_config = TDA10046_AGC_IFO_AUTO_POS, | |
458 | .if_freq = TDA10046_FREQ_052, | |
58ef4f92 HH |
459 | .tuner_address = 0x61, |
460 | .request_firmware = philips_tda1004x_request_firmware | |
2cf36ac4 HH |
461 | }; |
462 | ||
408b664a | 463 | static struct tda1004x_config medion_cardbus = { |
86ddd96f MCC |
464 | .demod_address = 0x08, |
465 | .invert = 1, | |
466 | .invert_oclk = 0, | |
467 | .xtal_freq = TDA10046_XTAL_16M, | |
468 | .agc_config = TDA10046_AGC_IFO_AUTO_NEG, | |
469 | .if_freq = TDA10046_FREQ_3613, | |
58ef4f92 HH |
470 | .tuner_address = 0x61, |
471 | .request_firmware = philips_tda1004x_request_firmware | |
86ddd96f MCC |
472 | }; |
473 | ||
58ef4f92 HH |
474 | /* ------------------------------------------------------------------ |
475 | * tda 1004x based cards with philips silicon tuner | |
476 | */ | |
477 | ||
58ef4f92 HH |
478 | static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable) |
479 | { | |
58ef4f92 HH |
480 | struct tda1004x_state *state = fe->demodulator_priv; |
481 | ||
482 | u8 addr = state->config->i2c_gate; | |
483 | static u8 tda8290_close[] = { 0x21, 0xc0}; | |
484 | static u8 tda8290_open[] = { 0x21, 0x80}; | |
485 | struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2}; | |
486 | if (enable) { | |
487 | tda8290_msg.buf = tda8290_close; | |
488 | } else { | |
489 | tda8290_msg.buf = tda8290_open; | |
490 | } | |
06be3035 | 491 | if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) { |
cf3c34c8 TP |
492 | struct saa7134_dev *dev = fe->dvb->priv; |
493 | wprintk("could not access tda8290 I2C gate\n"); | |
58ef4f92 HH |
494 | return -EIO; |
495 | } | |
496 | msleep(20); | |
497 | return 0; | |
498 | } | |
499 | ||
58ef4f92 | 500 | static int philips_tda827x_tuner_init(struct dvb_frontend *fe) |
90e9df7f | 501 | { |
90e9df7f | 502 | struct saa7134_dev *dev = fe->dvb->priv; |
58ef4f92 | 503 | struct tda1004x_state *state = fe->demodulator_priv; |
8ce47dad | 504 | |
58ef4f92 HH |
505 | switch (state->config->antenna_switch) { |
506 | case 0: break; | |
507 | case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); | |
508 | saa7134_set_gpio(dev, 21, 0); | |
509 | break; | |
510 | case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); | |
511 | saa7134_set_gpio(dev, 21, 1); | |
512 | break; | |
587d2fd7 | 513 | } |
587d2fd7 HH |
514 | return 0; |
515 | } | |
516 | ||
58ef4f92 | 517 | static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe) |
587d2fd7 | 518 | { |
58ef4f92 HH |
519 | struct saa7134_dev *dev = fe->dvb->priv; |
520 | struct tda1004x_state *state = fe->demodulator_priv; | |
8ce47dad | 521 | |
58ef4f92 HH |
522 | switch (state->config->antenna_switch) { |
523 | case 0: break; | |
524 | case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); | |
525 | saa7134_set_gpio(dev, 21, 1); | |
526 | break; | |
527 | case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); | |
528 | saa7134_set_gpio(dev, 21, 0); | |
529 | break; | |
530 | } | |
587d2fd7 | 531 | return 0; |
2d6b5f62 | 532 | } |
90e9df7f | 533 | |
d557dab5 MCC |
534 | static int configure_tda827x_fe(struct saa7134_dev *dev, |
535 | struct tda1004x_config *cdec_conf, | |
536 | struct tda827x_config *tuner_conf) | |
90e9df7f | 537 | { |
7bff4b4d | 538 | dev->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); |
58ef4f92 | 539 | if (dev->dvb.frontend) { |
7bff4b4d | 540 | if (cdec_conf->i2c_gate) |
58ef4f92 | 541 | dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; |
d557dab5 MCC |
542 | if (dvb_attach(tda827x_attach, dev->dvb.frontend, |
543 | cdec_conf->tuner_address, | |
544 | &dev->i2c_adap, tuner_conf)) | |
545 | return 0; | |
546 | ||
547 | wprintk("no tda827x tuner found at addr: %02x\n", | |
7bff4b4d | 548 | cdec_conf->tuner_address); |
58ef4f92 | 549 | } |
d557dab5 | 550 | return -EINVAL; |
90e9df7f HH |
551 | } |
552 | ||
58ef4f92 | 553 | /* ------------------------------------------------------------------ */ |
261f5081 | 554 | |
7bff4b4d HH |
555 | static struct tda827x_config tda827x_cfg_0 = { |
556 | .tuner_callback = saa7134_tuner_callback, | |
557 | .init = philips_tda827x_tuner_init, | |
558 | .sleep = philips_tda827x_tuner_sleep, | |
559 | .config = 0, | |
560 | .switch_addr = 0 | |
561 | }; | |
562 | ||
563 | static struct tda827x_config tda827x_cfg_1 = { | |
564 | .tuner_callback = saa7134_tuner_callback, | |
565 | .init = philips_tda827x_tuner_init, | |
566 | .sleep = philips_tda827x_tuner_sleep, | |
567 | .config = 1, | |
568 | .switch_addr = 0x4b | |
569 | }; | |
570 | ||
571 | static struct tda827x_config tda827x_cfg_2 = { | |
572 | .tuner_callback = saa7134_tuner_callback, | |
573 | .init = philips_tda827x_tuner_init, | |
574 | .sleep = philips_tda827x_tuner_sleep, | |
575 | .config = 2, | |
576 | .switch_addr = 0x4b | |
577 | }; | |
578 | ||
579 | static struct tda827x_config tda827x_cfg_2_sw42 = { | |
580 | .tuner_callback = saa7134_tuner_callback, | |
581 | .init = philips_tda827x_tuner_init, | |
582 | .sleep = philips_tda827x_tuner_sleep, | |
583 | .config = 2, | |
584 | .switch_addr = 0x42 | |
585 | }; | |
586 | ||
587 | /* ------------------------------------------------------------------ */ | |
588 | ||
58ef4f92 | 589 | static struct tda1004x_config tda827x_lifeview_config = { |
90e9df7f HH |
590 | .demod_address = 0x08, |
591 | .invert = 1, | |
592 | .invert_oclk = 0, | |
593 | .xtal_freq = TDA10046_XTAL_16M, | |
1bb0e866 HH |
594 | .agc_config = TDA10046_AGC_TDA827X, |
595 | .gpio_config = TDA10046_GP11_I, | |
550a9a5e | 596 | .if_freq = TDA10046_FREQ_045, |
58ef4f92 HH |
597 | .tuner_address = 0x60, |
598 | .request_firmware = philips_tda1004x_request_firmware | |
550a9a5e | 599 | }; |
550a9a5e | 600 | |
58ef4f92 HH |
601 | static struct tda1004x_config philips_tiger_config = { |
602 | .demod_address = 0x08, | |
603 | .invert = 1, | |
604 | .invert_oclk = 0, | |
605 | .xtal_freq = TDA10046_XTAL_16M, | |
606 | .agc_config = TDA10046_AGC_TDA827X, | |
607 | .gpio_config = TDA10046_GP11_I, | |
608 | .if_freq = TDA10046_FREQ_045, | |
609 | .i2c_gate = 0x4b, | |
610 | .tuner_address = 0x61, | |
58ef4f92 HH |
611 | .antenna_switch= 1, |
612 | .request_firmware = philips_tda1004x_request_firmware | |
613 | }; | |
550a9a5e HH |
614 | |
615 | static struct tda1004x_config cinergy_ht_config = { | |
616 | .demod_address = 0x08, | |
617 | .invert = 1, | |
618 | .invert_oclk = 0, | |
619 | .xtal_freq = TDA10046_XTAL_16M, | |
1bb0e866 HH |
620 | .agc_config = TDA10046_AGC_TDA827X, |
621 | .gpio_config = TDA10046_GP01_I, | |
90e9df7f | 622 | .if_freq = TDA10046_FREQ_045, |
58ef4f92 HH |
623 | .i2c_gate = 0x4b, |
624 | .tuner_address = 0x61, | |
58ef4f92 | 625 | .request_firmware = philips_tda1004x_request_firmware |
90e9df7f HH |
626 | }; |
627 | ||
58ef4f92 HH |
628 | static struct tda1004x_config cinergy_ht_pci_config = { |
629 | .demod_address = 0x08, | |
630 | .invert = 1, | |
631 | .invert_oclk = 0, | |
632 | .xtal_freq = TDA10046_XTAL_16M, | |
633 | .agc_config = TDA10046_AGC_TDA827X, | |
634 | .gpio_config = TDA10046_GP01_I, | |
635 | .if_freq = TDA10046_FREQ_045, | |
636 | .i2c_gate = 0x4b, | |
637 | .tuner_address = 0x60, | |
58ef4f92 HH |
638 | .request_firmware = philips_tda1004x_request_firmware |
639 | }; | |
640 | ||
641 | static struct tda1004x_config philips_tiger_s_config = { | |
642 | .demod_address = 0x08, | |
643 | .invert = 1, | |
644 | .invert_oclk = 0, | |
645 | .xtal_freq = TDA10046_XTAL_16M, | |
646 | .agc_config = TDA10046_AGC_TDA827X, | |
647 | .gpio_config = TDA10046_GP01_I, | |
648 | .if_freq = TDA10046_FREQ_045, | |
649 | .i2c_gate = 0x4b, | |
650 | .tuner_address = 0x61, | |
58ef4f92 HH |
651 | .antenna_switch= 1, |
652 | .request_firmware = philips_tda1004x_request_firmware | |
653 | }; | |
df42eaf2 | 654 | |
587d2fd7 HH |
655 | static struct tda1004x_config pinnacle_pctv_310i_config = { |
656 | .demod_address = 0x08, | |
657 | .invert = 1, | |
658 | .invert_oclk = 0, | |
659 | .xtal_freq = TDA10046_XTAL_16M, | |
1bb0e866 HH |
660 | .agc_config = TDA10046_AGC_TDA827X, |
661 | .gpio_config = TDA10046_GP11_I, | |
587d2fd7 | 662 | .if_freq = TDA10046_FREQ_045, |
58ef4f92 HH |
663 | .i2c_gate = 0x4b, |
664 | .tuner_address = 0x61, | |
58ef4f92 | 665 | .request_firmware = philips_tda1004x_request_firmware |
587d2fd7 HH |
666 | }; |
667 | ||
c6e53daf TG |
668 | static struct tda1004x_config hauppauge_hvr_1110_config = { |
669 | .demod_address = 0x08, | |
670 | .invert = 1, | |
671 | .invert_oclk = 0, | |
672 | .xtal_freq = TDA10046_XTAL_16M, | |
1bb0e866 HH |
673 | .agc_config = TDA10046_AGC_TDA827X, |
674 | .gpio_config = TDA10046_GP11_I, | |
c6e53daf | 675 | .if_freq = TDA10046_FREQ_045, |
58ef4f92 HH |
676 | .i2c_gate = 0x4b, |
677 | .tuner_address = 0x61, | |
678 | .request_firmware = philips_tda1004x_request_firmware | |
c6e53daf TG |
679 | }; |
680 | ||
83646817 HH |
681 | static struct tda1004x_config asus_p7131_dual_config = { |
682 | .demod_address = 0x08, | |
683 | .invert = 1, | |
684 | .invert_oclk = 0, | |
685 | .xtal_freq = TDA10046_XTAL_16M, | |
1bb0e866 HH |
686 | .agc_config = TDA10046_AGC_TDA827X, |
687 | .gpio_config = TDA10046_GP11_I, | |
83646817 | 688 | .if_freq = TDA10046_FREQ_045, |
58ef4f92 HH |
689 | .i2c_gate = 0x4b, |
690 | .tuner_address = 0x61, | |
58ef4f92 HH |
691 | .antenna_switch= 2, |
692 | .request_firmware = philips_tda1004x_request_firmware | |
83646817 HH |
693 | }; |
694 | ||
420f32fe NS |
695 | static struct tda1004x_config lifeview_trio_config = { |
696 | .demod_address = 0x09, | |
697 | .invert = 1, | |
698 | .invert_oclk = 0, | |
699 | .xtal_freq = TDA10046_XTAL_16M, | |
1bb0e866 HH |
700 | .agc_config = TDA10046_AGC_TDA827X, |
701 | .gpio_config = TDA10046_GP00_I, | |
420f32fe | 702 | .if_freq = TDA10046_FREQ_045, |
58ef4f92 HH |
703 | .tuner_address = 0x60, |
704 | .request_firmware = philips_tda1004x_request_firmware | |
420f32fe NS |
705 | }; |
706 | ||
58ef4f92 | 707 | static struct tda1004x_config tevion_dvbt220rf_config = { |
df42eaf2 HH |
708 | .demod_address = 0x08, |
709 | .invert = 1, | |
710 | .invert_oclk = 0, | |
711 | .xtal_freq = TDA10046_XTAL_16M, | |
1bb0e866 | 712 | .agc_config = TDA10046_AGC_TDA827X, |
58ef4f92 | 713 | .gpio_config = TDA10046_GP11_I, |
df42eaf2 | 714 | .if_freq = TDA10046_FREQ_045, |
58ef4f92 HH |
715 | .tuner_address = 0x60, |
716 | .request_firmware = philips_tda1004x_request_firmware | |
df42eaf2 HH |
717 | }; |
718 | ||
58ef4f92 | 719 | static struct tda1004x_config md8800_dvbt_config = { |
3dfb729f PH |
720 | .demod_address = 0x08, |
721 | .invert = 1, | |
722 | .invert_oclk = 0, | |
723 | .xtal_freq = TDA10046_XTAL_16M, | |
1bb0e866 | 724 | .agc_config = TDA10046_AGC_TDA827X, |
58ef4f92 | 725 | .gpio_config = TDA10046_GP01_I, |
3dfb729f | 726 | .if_freq = TDA10046_FREQ_045, |
58ef4f92 HH |
727 | .i2c_gate = 0x4b, |
728 | .tuner_address = 0x60, | |
58ef4f92 | 729 | .request_firmware = philips_tda1004x_request_firmware |
3dfb729f PH |
730 | }; |
731 | ||
e06cea4c HH |
732 | static struct tda1004x_config asus_p7131_4871_config = { |
733 | .demod_address = 0x08, | |
734 | .invert = 1, | |
735 | .invert_oclk = 0, | |
736 | .xtal_freq = TDA10046_XTAL_16M, | |
737 | .agc_config = TDA10046_AGC_TDA827X, | |
738 | .gpio_config = TDA10046_GP01_I, | |
739 | .if_freq = TDA10046_FREQ_045, | |
740 | .i2c_gate = 0x4b, | |
741 | .tuner_address = 0x61, | |
e06cea4c HH |
742 | .antenna_switch= 2, |
743 | .request_firmware = philips_tda1004x_request_firmware | |
744 | }; | |
745 | ||
f3eec0c0 | 746 | static struct tda1004x_config asus_p7131_hybrid_lna_config = { |
e06cea4c HH |
747 | .demod_address = 0x08, |
748 | .invert = 1, | |
749 | .invert_oclk = 0, | |
750 | .xtal_freq = TDA10046_XTAL_16M, | |
751 | .agc_config = TDA10046_AGC_TDA827X, | |
752 | .gpio_config = TDA10046_GP11_I, | |
753 | .if_freq = TDA10046_FREQ_045, | |
754 | .i2c_gate = 0x4b, | |
755 | .tuner_address = 0x61, | |
e06cea4c HH |
756 | .antenna_switch= 2, |
757 | .request_firmware = philips_tda1004x_request_firmware | |
758 | }; | |
261f5081 | 759 | |
b39423a9 SF |
760 | static struct tda1004x_config kworld_dvb_t_210_config = { |
761 | .demod_address = 0x08, | |
762 | .invert = 1, | |
763 | .invert_oclk = 0, | |
764 | .xtal_freq = TDA10046_XTAL_16M, | |
765 | .agc_config = TDA10046_AGC_TDA827X, | |
766 | .gpio_config = TDA10046_GP11_I, | |
767 | .if_freq = TDA10046_FREQ_045, | |
768 | .i2c_gate = 0x4b, | |
769 | .tuner_address = 0x61, | |
b39423a9 SF |
770 | .antenna_switch= 1, |
771 | .request_firmware = philips_tda1004x_request_firmware | |
772 | }; | |
261f5081 | 773 | |
d90d9f5a ES |
774 | static struct tda1004x_config avermedia_super_007_config = { |
775 | .demod_address = 0x08, | |
776 | .invert = 1, | |
777 | .invert_oclk = 0, | |
778 | .xtal_freq = TDA10046_XTAL_16M, | |
779 | .agc_config = TDA10046_AGC_TDA827X, | |
780 | .gpio_config = TDA10046_GP01_I, | |
781 | .if_freq = TDA10046_FREQ_045, | |
782 | .i2c_gate = 0x4b, | |
783 | .tuner_address = 0x60, | |
d90d9f5a ES |
784 | .antenna_switch= 1, |
785 | .request_firmware = philips_tda1004x_request_firmware | |
786 | }; | |
787 | ||
4ba24373 HP |
788 | static struct tda1004x_config twinhan_dtv_dvb_3056_config = { |
789 | .demod_address = 0x08, | |
790 | .invert = 1, | |
791 | .invert_oclk = 0, | |
792 | .xtal_freq = TDA10046_XTAL_16M, | |
793 | .agc_config = TDA10046_AGC_TDA827X, | |
794 | .gpio_config = TDA10046_GP01_I, | |
795 | .if_freq = TDA10046_FREQ_045, | |
796 | .i2c_gate = 0x42, | |
797 | .tuner_address = 0x61, | |
4ba24373 HP |
798 | .antenna_switch = 1, |
799 | .request_firmware = philips_tda1004x_request_firmware | |
800 | }; | |
801 | ||
58ef4f92 HH |
802 | /* ------------------------------------------------------------------ |
803 | * special case: this card uses saa713x GPIO22 for the mode switch | |
804 | */ | |
5eda227f | 805 | |
58ef4f92 | 806 | static int ads_duo_tuner_init(struct dvb_frontend *fe) |
5eda227f HH |
807 | { |
808 | struct saa7134_dev *dev = fe->dvb->priv; | |
58ef4f92 HH |
809 | philips_tda827x_tuner_init(fe); |
810 | /* route TDA8275a AGC input to the channel decoder */ | |
06be3035 | 811 | saa7134_set_gpio(dev, 22, 1); |
5eda227f HH |
812 | return 0; |
813 | } | |
814 | ||
58ef4f92 | 815 | static int ads_duo_tuner_sleep(struct dvb_frontend *fe) |
5eda227f | 816 | { |
5eda227f | 817 | struct saa7134_dev *dev = fe->dvb->priv; |
58ef4f92 | 818 | /* route TDA8275a AGC input to the analog IF chip*/ |
06be3035 | 819 | saa7134_set_gpio(dev, 22, 0); |
58ef4f92 HH |
820 | philips_tda827x_tuner_sleep(fe); |
821 | return 0; | |
5eda227f HH |
822 | } |
823 | ||
8ce47dad | 824 | static struct tda827x_config ads_duo_cfg = { |
7bff4b4d | 825 | .tuner_callback = saa7134_tuner_callback, |
8ce47dad | 826 | .init = ads_duo_tuner_init, |
7bff4b4d HH |
827 | .sleep = ads_duo_tuner_sleep, |
828 | .config = 0 | |
8ce47dad MK |
829 | }; |
830 | ||
58ef4f92 | 831 | static struct tda1004x_config ads_tech_duo_config = { |
5eda227f HH |
832 | .demod_address = 0x08, |
833 | .invert = 1, | |
834 | .invert_oclk = 0, | |
835 | .xtal_freq = TDA10046_XTAL_16M, | |
1bb0e866 | 836 | .agc_config = TDA10046_AGC_TDA827X, |
58ef4f92 | 837 | .gpio_config = TDA10046_GP00_I, |
5eda227f | 838 | .if_freq = TDA10046_FREQ_045, |
58ef4f92 HH |
839 | .tuner_address = 0x61, |
840 | .request_firmware = philips_tda1004x_request_firmware | |
5eda227f HH |
841 | }; |
842 | ||
58ef4f92 HH |
843 | /* ================================================================== |
844 | * tda10086 based DVB-S cards, helper functions | |
845 | */ | |
846 | ||
e2ac28fa IL |
847 | static struct tda10086_config flydvbs = { |
848 | .demod_address = 0x0e, | |
849 | .invert = 0, | |
ea75baf4 | 850 | .diseqc_tone = 0, |
9a1b04e4 HH |
851 | .xtal_freq = TDA10086_XTAL_16M, |
852 | }; | |
853 | ||
854 | static struct tda10086_config sd1878_4m = { | |
855 | .demod_address = 0x0e, | |
856 | .invert = 0, | |
857 | .diseqc_tone = 0, | |
858 | .xtal_freq = TDA10086_XTAL_4M, | |
e2ac28fa IL |
859 | }; |
860 | ||
1b1cee35 HH |
861 | /* ------------------------------------------------------------------ |
862 | * special case: lnb supply is connected to the gated i2c | |
863 | */ | |
864 | ||
865 | static int md8800_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) | |
866 | { | |
867 | int res = -EIO; | |
868 | struct saa7134_dev *dev = fe->dvb->priv; | |
869 | if (fe->ops.i2c_gate_ctrl) { | |
870 | fe->ops.i2c_gate_ctrl(fe, 1); | |
871 | if (dev->original_set_voltage) | |
872 | res = dev->original_set_voltage(fe, voltage); | |
873 | fe->ops.i2c_gate_ctrl(fe, 0); | |
874 | } | |
875 | return res; | |
876 | }; | |
877 | ||
878 | static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg) | |
879 | { | |
880 | int res = -EIO; | |
881 | struct saa7134_dev *dev = fe->dvb->priv; | |
882 | if (fe->ops.i2c_gate_ctrl) { | |
883 | fe->ops.i2c_gate_ctrl(fe, 1); | |
884 | if (dev->original_set_high_voltage) | |
885 | res = dev->original_set_high_voltage(fe, arg); | |
886 | fe->ops.i2c_gate_ctrl(fe, 0); | |
887 | } | |
888 | return res; | |
889 | }; | |
890 | ||
5823b3a6 HH |
891 | static int md8800_set_voltage2(struct dvb_frontend *fe, fe_sec_voltage_t voltage) |
892 | { | |
893 | struct saa7134_dev *dev = fe->dvb->priv; | |
894 | u8 wbuf[2] = { 0x1f, 00 }; | |
895 | u8 rbuf; | |
896 | struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 }, | |
897 | { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } }; | |
898 | ||
899 | if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2) | |
900 | return -EIO; | |
901 | /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */ | |
902 | if (voltage == SEC_VOLTAGE_18) | |
903 | wbuf[1] = rbuf | 0x10; | |
904 | else | |
905 | wbuf[1] = rbuf & 0xef; | |
906 | msg[0].len = 2; | |
907 | i2c_transfer(&dev->i2c_adap, msg, 1); | |
908 | return 0; | |
909 | } | |
910 | ||
911 | static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg) | |
912 | { | |
913 | struct saa7134_dev *dev = fe->dvb->priv; | |
914 | wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__); | |
915 | return -EIO; | |
916 | } | |
917 | ||
58ef4f92 HH |
918 | /* ================================================================== |
919 | * nxt200x based ATSC cards, helper functions | |
920 | */ | |
90e9df7f | 921 | |
3b64e8e2 MK |
922 | static struct nxt200x_config avertvhda180 = { |
923 | .demod_address = 0x0a, | |
3b64e8e2 | 924 | }; |
3e1410ad AB |
925 | |
926 | static struct nxt200x_config kworldatsc110 = { | |
927 | .demod_address = 0x0a, | |
3e1410ad | 928 | }; |
3b64e8e2 | 929 | |
58ef4f92 HH |
930 | /* ================================================================== |
931 | * Core code | |
932 | */ | |
1da177e4 LT |
933 | |
934 | static int dvb_init(struct saa7134_dev *dev) | |
935 | { | |
1c4f76ab | 936 | int ret; |
bc36a686 MCC |
937 | int attach_xc3028 = 0; |
938 | ||
1da177e4 LT |
939 | /* init struct videobuf_dvb */ |
940 | dev->ts.nr_bufs = 32; | |
941 | dev->ts.nr_packets = 32*4; | |
942 | dev->dvb.name = dev->name; | |
0705135e GL |
943 | videobuf_queue_sg_init(&dev->dvb.dvbq, &saa7134_ts_qops, |
944 | &dev->pci->dev, &dev->slock, | |
1da177e4 LT |
945 | V4L2_BUF_TYPE_VIDEO_CAPTURE, |
946 | V4L2_FIELD_ALTERNATE, | |
947 | sizeof(struct saa7134_buf), | |
948 | dev); | |
949 | ||
950 | switch (dev->board) { | |
951 | case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: | |
cf3c34c8 | 952 | dprintk("pinnacle 300i dvb setup\n"); |
2bfe031d | 953 | dev->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, |
f7b54b10 | 954 | &dev->i2c_adap); |
6b3ccab7 | 955 | if (dev->dvb.frontend) { |
dea74869 | 956 | dev->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; |
6b3ccab7 | 957 | } |
1da177e4 | 958 | break; |
a78d0bfa | 959 | case SAA7134_BOARD_AVERMEDIA_777: |
515c208d | 960 | case SAA7134_BOARD_AVERMEDIA_A16AR: |
cf3c34c8 | 961 | dprintk("avertv 777 dvb setup\n"); |
2bfe031d | 962 | dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, |
f7b54b10 | 963 | &dev->i2c_adap); |
6b3ccab7 | 964 | if (dev->dvb.frontend) { |
fb147e97 MK |
965 | dvb_attach(simple_tuner_attach, dev->dvb.frontend, |
966 | &dev->i2c_adap, 0x61, | |
967 | TUNER_PHILIPS_TD1316); | |
6b3ccab7 | 968 | } |
a78d0bfa | 969 | break; |
95a2fdb6 | 970 | case SAA7134_BOARD_AVERMEDIA_A16D: |
6e501a3f TF |
971 | dprintk("AverMedia A16D dvb setup\n"); |
972 | dev->dvb.frontend = dvb_attach(mt352_attach, | |
973 | &avermedia_xc3028_mt352_dev, | |
974 | &dev->i2c_adap); | |
95a2fdb6 MCC |
975 | attach_xc3028 = 1; |
976 | break; | |
1da177e4 | 977 | case SAA7134_BOARD_MD7134: |
f7b54b10 MK |
978 | dev->dvb.frontend = dvb_attach(tda10046_attach, |
979 | &medion_cardbus, | |
980 | &dev->i2c_adap); | |
6b3ccab7 | 981 | if (dev->dvb.frontend) { |
cb89cd33 MK |
982 | dvb_attach(simple_tuner_attach, dev->dvb.frontend, |
983 | &dev->i2c_adap, medion_cardbus.tuner_address, | |
984 | TUNER_PHILIPS_FMD1216ME_MK3); | |
6b3ccab7 | 985 | } |
1da177e4 | 986 | break; |
86ddd96f | 987 | case SAA7134_BOARD_PHILIPS_TOUGH: |
f7b54b10 MK |
988 | dev->dvb.frontend = dvb_attach(tda10046_attach, |
989 | &philips_tu1216_60_config, | |
990 | &dev->i2c_adap); | |
6b3ccab7 | 991 | if (dev->dvb.frontend) { |
58ef4f92 HH |
992 | dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; |
993 | dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; | |
6b3ccab7 | 994 | } |
86ddd96f MCC |
995 | break; |
996 | case SAA7134_BOARD_FLYDVBTDUO: | |
10b7a903 | 997 | case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS: |
d557dab5 MCC |
998 | if (configure_tda827x_fe(dev, &tda827x_lifeview_config, |
999 | &tda827x_cfg_0) < 0) | |
1000 | goto dettach_frontend; | |
86ddd96f | 1001 | break; |
2cf36ac4 | 1002 | case SAA7134_BOARD_PHILIPS_EUROPA: |
2cf36ac4 | 1003 | case SAA7134_BOARD_VIDEOMATE_DVBT_300: |
f7b54b10 MK |
1004 | dev->dvb.frontend = dvb_attach(tda10046_attach, |
1005 | &philips_europa_config, | |
1006 | &dev->i2c_adap); | |
6b3ccab7 | 1007 | if (dev->dvb.frontend) { |
588f9831 HH |
1008 | dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; |
1009 | dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; | |
dea74869 PB |
1010 | dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; |
1011 | dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; | |
1012 | dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; | |
6b3ccab7 | 1013 | } |
2cf36ac4 HH |
1014 | break; |
1015 | case SAA7134_BOARD_VIDEOMATE_DVBT_200: | |
f7b54b10 MK |
1016 | dev->dvb.frontend = dvb_attach(tda10046_attach, |
1017 | &philips_tu1216_61_config, | |
1018 | &dev->i2c_adap); | |
6b3ccab7 | 1019 | if (dev->dvb.frontend) { |
58ef4f92 HH |
1020 | dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; |
1021 | dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; | |
6b3ccab7 | 1022 | } |
2cf36ac4 | 1023 | break; |
b39423a9 | 1024 | case SAA7134_BOARD_KWORLD_DVBT_210: |
d557dab5 MCC |
1025 | if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config, |
1026 | &tda827x_cfg_2) < 0) | |
1027 | goto dettach_frontend; | |
b39423a9 | 1028 | break; |
90e9df7f | 1029 | case SAA7134_BOARD_PHILIPS_TIGER: |
d557dab5 MCC |
1030 | if (configure_tda827x_fe(dev, &philips_tiger_config, |
1031 | &tda827x_cfg_0) < 0) | |
1032 | goto dettach_frontend; | |
587d2fd7 HH |
1033 | break; |
1034 | case SAA7134_BOARD_PINNACLE_PCTV_310i: | |
d557dab5 MCC |
1035 | if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, |
1036 | &tda827x_cfg_1) < 0) | |
1037 | goto dettach_frontend; | |
90e9df7f | 1038 | break; |
c6e53daf | 1039 | case SAA7134_BOARD_HAUPPAUGE_HVR1110: |
d557dab5 MCC |
1040 | if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, |
1041 | &tda827x_cfg_1) < 0) | |
1042 | goto dettach_frontend; | |
c6e53daf | 1043 | break; |
d4b0aba4 | 1044 | case SAA7134_BOARD_ASUSTeK_P7131_DUAL: |
d557dab5 MCC |
1045 | if (configure_tda827x_fe(dev, &asus_p7131_dual_config, |
1046 | &tda827x_cfg_0) < 0) | |
1047 | goto dettach_frontend; | |
d4b0aba4 | 1048 | break; |
3d8466ec | 1049 | case SAA7134_BOARD_FLYDVBT_LR301: |
d557dab5 MCC |
1050 | if (configure_tda827x_fe(dev, &tda827x_lifeview_config, |
1051 | &tda827x_cfg_0) < 0) | |
1052 | goto dettach_frontend; | |
3d8466ec | 1053 | break; |
420f32fe | 1054 | case SAA7134_BOARD_FLYDVB_TRIO: |
d557dab5 MCC |
1055 | if (!use_frontend) { /* terrestrial */ |
1056 | if (configure_tda827x_fe(dev, &lifeview_trio_config, | |
1057 | &tda827x_cfg_0) < 0) | |
1058 | goto dettach_frontend; | |
7bff4b4d | 1059 | } else { /* satellite */ |
1f683cd8 NS |
1060 | dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); |
1061 | if (dev->dvb.frontend) { | |
1062 | if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63, | |
1063 | &dev->i2c_adap, 0) == NULL) { | |
5823b3a6 | 1064 | wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__); |
d557dab5 | 1065 | goto dettach_frontend; |
1f683cd8 NS |
1066 | } |
1067 | if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, | |
1068 | 0x08, 0, 0) == NULL) { | |
5823b3a6 | 1069 | wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__); |
d557dab5 | 1070 | goto dettach_frontend; |
1f683cd8 NS |
1071 | } |
1072 | } | |
6b3ccab7 | 1073 | } |
420f32fe | 1074 | break; |
df42eaf2 | 1075 | case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: |
58ef4f92 | 1076 | case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: |
f7b54b10 MK |
1077 | dev->dvb.frontend = dvb_attach(tda10046_attach, |
1078 | &ads_tech_duo_config, | |
1079 | &dev->i2c_adap); | |
6b3ccab7 | 1080 | if (dev->dvb.frontend) { |
ede2200d | 1081 | if (dvb_attach(tda827x_attach,dev->dvb.frontend, |
7bff4b4d HH |
1082 | ads_tech_duo_config.tuner_address, &dev->i2c_adap, |
1083 | &ads_duo_cfg) == NULL) { | |
cf3c34c8 | 1084 | wprintk("no tda827x tuner found at addr: %02x\n", |
ede2200d | 1085 | ads_tech_duo_config.tuner_address); |
d557dab5 | 1086 | goto dettach_frontend; |
ede2200d | 1087 | } |
bc36ec74 MCC |
1088 | } else |
1089 | wprintk("failed to attach tda10046\n"); | |
df42eaf2 | 1090 | break; |
3dfb729f | 1091 | case SAA7134_BOARD_TEVION_DVBT_220RF: |
d557dab5 MCC |
1092 | if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config, |
1093 | &tda827x_cfg_0) < 0) | |
1094 | goto dettach_frontend; | |
d95b8942 | 1095 | break; |
5eda227f | 1096 | case SAA7134_BOARD_MEDION_MD8800_QUADRO: |
4b1431ca | 1097 | if (!use_frontend) { /* terrestrial */ |
d557dab5 MCC |
1098 | if (configure_tda827x_fe(dev, &md8800_dvbt_config, |
1099 | &tda827x_cfg_0) < 0) | |
1100 | goto dettach_frontend; | |
4b1431ca HH |
1101 | } else { /* satellite */ |
1102 | dev->dvb.frontend = dvb_attach(tda10086_attach, | |
1103 | &flydvbs, &dev->i2c_adap); | |
1104 | if (dev->dvb.frontend) { | |
5823b3a6 HH |
1105 | struct dvb_frontend *fe = dev->dvb.frontend; |
1106 | u8 dev_id = dev->eedata[2]; | |
1107 | u8 data = 0xc4; | |
1108 | struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; | |
1109 | ||
4b1431ca | 1110 | if (dvb_attach(tda826x_attach, dev->dvb.frontend, |
d557dab5 | 1111 | 0x60, &dev->i2c_adap, 0) == NULL) { |
4b1431ca | 1112 | wprintk("%s: Medion Quadro, no tda826x " |
5823b3a6 | 1113 | "found !\n", __func__); |
d557dab5 MCC |
1114 | goto dettach_frontend; |
1115 | } | |
5823b3a6 HH |
1116 | if (dev_id != 0x08) { |
1117 | /* we need to open the i2c gate (we know it exists) */ | |
1118 | fe->ops.i2c_gate_ctrl(fe, 1); | |
1119 | if (dvb_attach(isl6405_attach, fe, | |
d557dab5 | 1120 | &dev->i2c_adap, 0x08, 0, 0) == NULL) { |
5823b3a6 HH |
1121 | wprintk("%s: Medion Quadro, no ISL6405 " |
1122 | "found !\n", __func__); | |
d557dab5 MCC |
1123 | goto dettach_frontend; |
1124 | } | |
e9c1ac9d HH |
1125 | if (dev_id == 0x07) { |
1126 | /* fire up the 2nd section of the LNB supply since | |
1127 | we can't do this from the other section */ | |
1128 | msg.buf = &data; | |
1129 | i2c_transfer(&dev->i2c_adap, &msg, 1); | |
1130 | } | |
5823b3a6 HH |
1131 | fe->ops.i2c_gate_ctrl(fe, 0); |
1132 | dev->original_set_voltage = fe->ops.set_voltage; | |
1133 | fe->ops.set_voltage = md8800_set_voltage; | |
1134 | dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; | |
1135 | fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; | |
1136 | } else { | |
1137 | fe->ops.set_voltage = md8800_set_voltage2; | |
1138 | fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2; | |
1139 | } | |
4b1431ca HH |
1140 | } |
1141 | } | |
5eda227f | 1142 | break; |
3b64e8e2 | 1143 | case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: |
f7b54b10 MK |
1144 | dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, |
1145 | &dev->i2c_adap); | |
d557dab5 | 1146 | if (dev->dvb.frontend) |
4ad8eee5 | 1147 | dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, |
47a9991e | 1148 | NULL, DVB_PLL_TDHU2); |
3b64e8e2 | 1149 | break; |
3e1410ad | 1150 | case SAA7134_BOARD_KWORLD_ATSC110: |
f7b54b10 MK |
1151 | dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, |
1152 | &dev->i2c_adap); | |
d557dab5 | 1153 | if (dev->dvb.frontend) |
62ff817a MK |
1154 | dvb_attach(simple_tuner_attach, dev->dvb.frontend, |
1155 | &dev->i2c_adap, 0x61, | |
1156 | TUNER_PHILIPS_TUV1236D); | |
3e1410ad | 1157 | break; |
e2ac28fa | 1158 | case SAA7134_BOARD_FLYDVBS_LR300: |
f7b54b10 MK |
1159 | dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, |
1160 | &dev->i2c_adap); | |
e2ac28fa | 1161 | if (dev->dvb.frontend) { |
f7b54b10 MK |
1162 | if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, |
1163 | &dev->i2c_adap, 0) == NULL) { | |
5823b3a6 | 1164 | wprintk("%s: No tda826x found!\n", __func__); |
d557dab5 | 1165 | goto dettach_frontend; |
e2ac28fa | 1166 | } |
f7b54b10 MK |
1167 | if (dvb_attach(isl6421_attach, dev->dvb.frontend, |
1168 | &dev->i2c_adap, 0x08, 0, 0) == NULL) { | |
5823b3a6 | 1169 | wprintk("%s: No ISL6421 found!\n", __func__); |
d557dab5 | 1170 | goto dettach_frontend; |
e2ac28fa IL |
1171 | } |
1172 | } | |
1173 | break; | |
cf146ca4 | 1174 | case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: |
0e8f4cc5 MS |
1175 | dev->dvb.frontend = dvb_attach(tda10046_attach, |
1176 | &medion_cardbus, | |
1177 | &dev->i2c_adap); | |
cf146ca4 HH |
1178 | if (dev->dvb.frontend) { |
1179 | dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; | |
1180 | dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; | |
b7754d74 | 1181 | |
cb89cd33 MK |
1182 | dvb_attach(simple_tuner_attach, dev->dvb.frontend, |
1183 | &dev->i2c_adap, medion_cardbus.tuner_address, | |
1184 | TUNER_PHILIPS_FMD1216ME_MK3); | |
cf146ca4 HH |
1185 | } |
1186 | break; | |
cbb94521 HH |
1187 | case SAA7134_BOARD_VIDEOMATE_DVBT_200A: |
1188 | dev->dvb.frontend = dvb_attach(tda10046_attach, | |
1189 | &philips_europa_config, | |
1190 | &dev->i2c_adap); | |
1191 | if (dev->dvb.frontend) { | |
1192 | dev->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; | |
1193 | dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; | |
1194 | } | |
1195 | break; | |
550a9a5e | 1196 | case SAA7134_BOARD_CINERGY_HT_PCMCIA: |
d557dab5 MCC |
1197 | if (configure_tda827x_fe(dev, &cinergy_ht_config, |
1198 | &tda827x_cfg_0) < 0) | |
1199 | goto dettach_frontend; | |
9de271e6 MK |
1200 | break; |
1201 | case SAA7134_BOARD_CINERGY_HT_PCI: | |
d557dab5 MCC |
1202 | if (configure_tda827x_fe(dev, &cinergy_ht_pci_config, |
1203 | &tda827x_cfg_0) < 0) | |
1204 | goto dettach_frontend; | |
58ef4f92 HH |
1205 | break; |
1206 | case SAA7134_BOARD_PHILIPS_TIGER_S: | |
d557dab5 MCC |
1207 | if (configure_tda827x_fe(dev, &philips_tiger_s_config, |
1208 | &tda827x_cfg_2) < 0) | |
1209 | goto dettach_frontend; | |
550a9a5e | 1210 | break; |
e06cea4c | 1211 | case SAA7134_BOARD_ASUS_P7131_4871: |
d557dab5 MCC |
1212 | if (configure_tda827x_fe(dev, &asus_p7131_4871_config, |
1213 | &tda827x_cfg_2) < 0) | |
1214 | goto dettach_frontend; | |
e06cea4c | 1215 | break; |
f3eec0c0 | 1216 | case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: |
d557dab5 MCC |
1217 | if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, |
1218 | &tda827x_cfg_2) < 0) | |
1219 | goto dettach_frontend; | |
e06cea4c | 1220 | break; |
d90d9f5a | 1221 | case SAA7134_BOARD_AVERMEDIA_SUPER_007: |
d557dab5 MCC |
1222 | if (configure_tda827x_fe(dev, &avermedia_super_007_config, |
1223 | &tda827x_cfg_0) < 0) | |
1224 | goto dettach_frontend; | |
d90d9f5a | 1225 | break; |
4ba24373 | 1226 | case SAA7134_BOARD_TWINHAN_DTV_DVB_3056: |
d557dab5 MCC |
1227 | if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, |
1228 | &tda827x_cfg_2_sw42) < 0) | |
1229 | goto dettach_frontend; | |
4ba24373 | 1230 | break; |
6ab465a8 HH |
1231 | case SAA7134_BOARD_PHILIPS_SNAKE: |
1232 | dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, | |
1233 | &dev->i2c_adap); | |
1234 | if (dev->dvb.frontend) { | |
1235 | if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, | |
d557dab5 | 1236 | &dev->i2c_adap, 0) == NULL) { |
5823b3a6 | 1237 | wprintk("%s: No tda826x found!\n", __func__); |
d557dab5 MCC |
1238 | goto dettach_frontend; |
1239 | } | |
6ab465a8 | 1240 | if (dvb_attach(lnbp21_attach, dev->dvb.frontend, |
d557dab5 | 1241 | &dev->i2c_adap, 0, 0) == NULL) { |
5823b3a6 | 1242 | wprintk("%s: No lnbp21 found!\n", __func__); |
d557dab5 MCC |
1243 | goto dettach_frontend; |
1244 | } | |
6ab465a8 HH |
1245 | } |
1246 | break; | |
7b5b3f17 | 1247 | case SAA7134_BOARD_CREATIX_CTX953: |
d557dab5 MCC |
1248 | if (configure_tda827x_fe(dev, &md8800_dvbt_config, |
1249 | &tda827x_cfg_0) < 0) | |
1250 | goto dettach_frontend; | |
7b5b3f17 | 1251 | break; |
6a6179b6 | 1252 | case SAA7134_BOARD_MSI_TVANYWHERE_AD11: |
d557dab5 MCC |
1253 | if (configure_tda827x_fe(dev, &philips_tiger_s_config, |
1254 | &tda827x_cfg_2) < 0) | |
1255 | goto dettach_frontend; | |
6a6179b6 | 1256 | break; |
bc36a686 | 1257 | case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: |
6e501a3f TF |
1258 | dprintk("AverMedia E506R dvb setup\n"); |
1259 | saa7134_set_gpio(dev, 25, 0); | |
1260 | msleep(10); | |
1261 | saa7134_set_gpio(dev, 25, 1); | |
bc36a686 | 1262 | dev->dvb.frontend = dvb_attach(mt352_attach, |
6e501a3f TF |
1263 | &avermedia_xc3028_mt352_dev, |
1264 | &dev->i2c_adap); | |
bc36a686 | 1265 | attach_xc3028 = 1; |
637afdb5 HH |
1266 | case SAA7134_BOARD_MD7134_BRIDGE_2: |
1267 | dev->dvb.frontend = dvb_attach(tda10086_attach, | |
9a1b04e4 | 1268 | &sd1878_4m, &dev->i2c_adap); |
637afdb5 HH |
1269 | if (dev->dvb.frontend) { |
1270 | struct dvb_frontend *fe; | |
1271 | if (dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, | |
d557dab5 | 1272 | &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) { |
637afdb5 | 1273 | wprintk("%s: MD7134 DVB-S, no SD1878 " |
5823b3a6 | 1274 | "found !\n", __func__); |
d557dab5 MCC |
1275 | goto dettach_frontend; |
1276 | } | |
637afdb5 HH |
1277 | /* we need to open the i2c gate (we know it exists) */ |
1278 | fe = dev->dvb.frontend; | |
1279 | fe->ops.i2c_gate_ctrl(fe, 1); | |
1280 | if (dvb_attach(isl6405_attach, fe, | |
d557dab5 | 1281 | &dev->i2c_adap, 0x08, 0, 0) == NULL) { |
637afdb5 | 1282 | wprintk("%s: MD7134 DVB-S, no ISL6405 " |
5823b3a6 | 1283 | "found !\n", __func__); |
d557dab5 MCC |
1284 | goto dettach_frontend; |
1285 | } | |
637afdb5 HH |
1286 | fe->ops.i2c_gate_ctrl(fe, 0); |
1287 | dev->original_set_voltage = fe->ops.set_voltage; | |
1288 | fe->ops.set_voltage = md8800_set_voltage; | |
1289 | dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; | |
1290 | fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; | |
1291 | } | |
1292 | break; | |
1da177e4 | 1293 | default: |
cf3c34c8 | 1294 | wprintk("Huh? unknown DVB card?\n"); |
1da177e4 LT |
1295 | break; |
1296 | } | |
1297 | ||
bc36a686 MCC |
1298 | if (attach_xc3028) { |
1299 | struct dvb_frontend *fe; | |
1300 | struct xc2028_config cfg = { | |
1301 | .i2c_adap = &dev->i2c_adap, | |
1302 | .i2c_addr = 0x61, | |
bc36a686 | 1303 | }; |
95a2fdb6 MCC |
1304 | |
1305 | if (!dev->dvb.frontend) | |
1306 | return -1; | |
1307 | ||
bc36a686 MCC |
1308 | fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg); |
1309 | if (!fe) { | |
1310 | printk(KERN_ERR "%s/2: xc3028 attach failed\n", | |
1311 | dev->name); | |
d557dab5 | 1312 | goto dettach_frontend; |
bc36a686 MCC |
1313 | } |
1314 | } | |
1315 | ||
1da177e4 | 1316 | if (NULL == dev->dvb.frontend) { |
cf3c34c8 | 1317 | printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name); |
1da177e4 LT |
1318 | return -1; |
1319 | } | |
1320 | ||
1321 | /* register everything else */ | |
78e92006 JG |
1322 | ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev, |
1323 | adapter_nr); | |
1c4f76ab HH |
1324 | |
1325 | /* this sequence is necessary to make the tda1004x load its firmware | |
1326 | * and to enter analog mode of hybrid boards | |
1327 | */ | |
1328 | if (!ret) { | |
1329 | if (dev->dvb.frontend->ops.init) | |
1330 | dev->dvb.frontend->ops.init(dev->dvb.frontend); | |
1331 | if (dev->dvb.frontend->ops.sleep) | |
1332 | dev->dvb.frontend->ops.sleep(dev->dvb.frontend); | |
9971f4f1 HH |
1333 | if (dev->dvb.frontend->ops.tuner_ops.sleep) |
1334 | dev->dvb.frontend->ops.tuner_ops.sleep(dev->dvb.frontend); | |
1c4f76ab HH |
1335 | } |
1336 | return ret; | |
d557dab5 MCC |
1337 | |
1338 | dettach_frontend: | |
bf67cac1 MCC |
1339 | if (dev->dvb.frontend) |
1340 | dvb_frontend_detach(dev->dvb.frontend); | |
d557dab5 MCC |
1341 | dev->dvb.frontend = NULL; |
1342 | ||
1343 | return -1; | |
1da177e4 LT |
1344 | } |
1345 | ||
1346 | static int dvb_fini(struct saa7134_dev *dev) | |
1347 | { | |
7f171123 MCC |
1348 | /* FIXME: I suspect that this code is bogus, since the entry for |
1349 | Pinnacle 300I DVB-T PAL already defines the proper init to allow | |
1350 | the detection of mt2032 (TDA9887_PORT2_INACTIVE) | |
1351 | */ | |
1352 | if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) { | |
1353 | struct v4l2_priv_tun_config tda9887_cfg; | |
1354 | static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; | |
1355 | ||
1356 | tda9887_cfg.tuner = TUNER_TDA9887; | |
1357 | tda9887_cfg.priv = &on; | |
1da177e4 | 1358 | |
1da177e4 | 1359 | /* otherwise we don't detect the tuner on next insmod */ |
7f171123 | 1360 | saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &tda9887_cfg); |
5823b3a6 | 1361 | } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) { |
e9c1ac9d | 1362 | if ((dev->eedata[2] == 0x07) && use_frontend) { |
5823b3a6 HH |
1363 | /* turn off the 2nd lnb supply */ |
1364 | u8 data = 0x80; | |
1365 | struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1}; | |
1366 | struct dvb_frontend *fe; | |
1367 | fe = dev->dvb.frontend; | |
1368 | if (fe->ops.i2c_gate_ctrl) { | |
1369 | fe->ops.i2c_gate_ctrl(fe, 1); | |
1370 | i2c_transfer(&dev->i2c_adap, &msg, 1); | |
1371 | fe->ops.i2c_gate_ctrl(fe, 0); | |
1372 | } | |
1373 | } | |
7f171123 | 1374 | } |
9950c1b5 MCC |
1375 | if (dev->dvb.frontend) |
1376 | videobuf_dvb_unregister(&dev->dvb); | |
1da177e4 LT |
1377 | return 0; |
1378 | } | |
1379 | ||
1380 | static struct saa7134_mpeg_ops dvb_ops = { | |
1381 | .type = SAA7134_MPEG_DVB, | |
1382 | .init = dvb_init, | |
1383 | .fini = dvb_fini, | |
1384 | }; | |
1385 | ||
1386 | static int __init dvb_register(void) | |
1387 | { | |
1388 | return saa7134_ts_register(&dvb_ops); | |
1389 | } | |
1390 | ||
1391 | static void __exit dvb_unregister(void) | |
1392 | { | |
1393 | saa7134_ts_unregister(&dvb_ops); | |
1394 | } | |
1395 | ||
1396 | module_init(dvb_register); | |
1397 | module_exit(dvb_unregister); | |
1398 | ||
1399 | /* ------------------------------------------------------------------ */ | |
1400 | /* | |
1401 | * Local variables: | |
1402 | * c-basic-offset: 8 | |
1403 | * End: | |
1404 | */ |