]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * For the STS-Thompson TDA7432 audio processor chip | |
3 | * | |
4 | * Handles audio functions: volume, balance, tone, loudness | |
5 | * This driver will not complain if used with any | |
6 | * other i2c device with the same address. | |
7 | * | |
8 | * Muting and tone control by Jonathan Isom <jisom@ematic.com> | |
9 | * | |
10 | * Copyright (c) 2000 Eric Sandeen <eric_sandeen@bigfoot.com> | |
11 | * This code is placed under the terms of the GNU General Public License | |
12 | * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu) | |
13 | * Which was based on tda8425.c by Greg Alexander (c) 1998 | |
14 | * | |
15 | * OPTIONS: | |
16 | * debug - set to 1 if you'd like to see debug messages | |
17 | * set to 2 if you'd like to be inundated with debug messages | |
18 | * | |
19 | * loudness - set between 0 and 15 for varying degrees of loudness effect | |
20 | * | |
21 | * maxvol - set maximium volume to +20db (1), default is 0db(0) | |
22 | * | |
23 | * | |
24 | * Revision: 0.7 - maxvol module parm to set maximium volume 0db or +20db | |
25 | * store if muted so we can return it | |
26 | * change balance only if flaged to | |
27 | * Revision: 0.6 - added tone controls | |
28 | * Revision: 0.5 - Fixed odd balance problem | |
29 | * Revision: 0.4 - added muting | |
30 | * Revision: 0.3 - Fixed silly reversed volume controls. :) | |
31 | * Revision: 0.2 - Cleaned up #defines | |
32 | * fixed volume control | |
33 | * Added I2C_DRIVERID_TDA7432 | |
34 | * added loudness insmod control | |
35 | * Revision: 0.1 - initial version | |
36 | */ | |
37 | ||
38 | #include <linux/module.h> | |
39 | #include <linux/init.h> | |
40 | #include <linux/kernel.h> | |
41 | #include <linux/sched.h> | |
42 | #include <linux/string.h> | |
43 | #include <linux/timer.h> | |
44 | #include <linux/delay.h> | |
45 | #include <linux/errno.h> | |
46 | #include <linux/slab.h> | |
47 | #include <linux/videodev.h> | |
48 | #include <linux/i2c.h> | |
49 | #include <linux/i2c-algo-bit.h> | |
50 | ||
51 | #include "bttv.h" | |
52 | #include <media/audiochip.h> | |
53 | #include <media/id.h> | |
54 | ||
55 | #ifndef VIDEO_AUDIO_BALANCE | |
56 | # define VIDEO_AUDIO_BALANCE 32 | |
57 | #endif | |
58 | ||
59 | MODULE_AUTHOR("Eric Sandeen <eric_sandeen@bigfoot.com>"); | |
60 | MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip"); | |
61 | MODULE_LICENSE("GPL"); | |
62 | ||
63 | static int maxvol; | |
64 | static int loudness; /* disable loudness by default */ | |
65 | static int debug; /* insmod parameter */ | |
66 | module_param(debug, int, S_IRUGO | S_IWUSR); | |
67 | module_param(loudness, int, S_IRUGO); | |
68 | MODULE_PARM_DESC(maxvol,"Set maximium volume to +20db (0), default is 0db(1)"); | |
69 | module_param(maxvol, int, S_IRUGO | S_IWUSR); | |
70 | ||
71 | ||
72 | /* Address to scan (I2C address of this chip) */ | |
73 | static unsigned short normal_i2c[] = { | |
74 | I2C_TDA7432 >> 1, | |
75 | I2C_CLIENT_END, | |
76 | }; | |
1da177e4 LT |
77 | I2C_CLIENT_INSMOD; |
78 | ||
79 | /* Structure of address and subaddresses for the tda7432 */ | |
80 | ||
81 | struct tda7432 { | |
82 | int addr; | |
83 | int input; | |
84 | int volume; | |
85 | int muted; | |
86 | int bass, treble; | |
87 | int lf, lr, rf, rr; | |
88 | int loud; | |
89 | struct i2c_client c; | |
90 | }; | |
91 | static struct i2c_driver driver; | |
92 | static struct i2c_client client_template; | |
93 | ||
94 | #define dprintk if (debug) printk | |
95 | #define d2printk if (debug > 1) printk | |
96 | ||
97 | /* The TDA7432 is made by STS-Thompson | |
98 | * http://www.st.com | |
99 | * http://us.st.com/stonline/books/pdf/docs/4056.pdf | |
100 | * | |
101 | * TDA7432: I2C-bus controlled basic audio processor | |
102 | * | |
103 | * The TDA7432 controls basic audio functions like volume, balance, | |
104 | * and tone control (including loudness). It also has four channel | |
105 | * output (for front and rear). Since most vidcap cards probably | |
106 | * don't have 4 channel output, this driver will set front & rear | |
107 | * together (no independent control). | |
108 | */ | |
109 | ||
110 | /* Subaddresses for TDA7432 */ | |
111 | ||
112 | #define TDA7432_IN 0x00 /* Input select */ | |
113 | #define TDA7432_VL 0x01 /* Volume */ | |
114 | #define TDA7432_TN 0x02 /* Bass, Treble (Tone) */ | |
115 | #define TDA7432_LF 0x03 /* Attenuation LF (Left Front) */ | |
116 | #define TDA7432_LR 0x04 /* Attenuation LR (Left Rear) */ | |
117 | #define TDA7432_RF 0x05 /* Attenuation RF (Right Front) */ | |
118 | #define TDA7432_RR 0x06 /* Attenuation RR (Right Rear) */ | |
119 | #define TDA7432_LD 0x07 /* Loudness */ | |
120 | ||
121 | ||
122 | /* Masks for bits in TDA7432 subaddresses */ | |
123 | ||
124 | /* Many of these not used - just for documentation */ | |
125 | ||
126 | /* Subaddress 0x00 - Input selection and bass control */ | |
127 | ||
128 | /* Bits 0,1,2 control input: | |
129 | * 0x00 - Stereo input | |
130 | * 0x02 - Mono input | |
131 | * 0x03 - Mute (Using Attenuators Plays better with modules) | |
132 | * Mono probably isn't used - I'm guessing only the stereo | |
133 | * input is connected on most cards, so we'll set it to stereo. | |
134 | * | |
135 | * Bit 3 controls bass cut: 0/1 is non-symmetric/symmetric bass cut | |
136 | * Bit 4 controls bass range: 0/1 is extended/standard bass range | |
137 | * | |
138 | * Highest 3 bits not used | |
139 | */ | |
140 | ||
141 | #define TDA7432_STEREO_IN 0 | |
142 | #define TDA7432_MONO_IN 2 /* Probably won't be used */ | |
143 | #define TDA7432_BASS_SYM 1 << 3 | |
144 | #define TDA7432_BASS_NORM 1 << 4 | |
145 | ||
146 | /* Subaddress 0x01 - Volume */ | |
147 | ||
148 | /* Lower 7 bits control volume from -79dB to +32dB in 1dB steps | |
149 | * Recommended maximum is +20 dB | |
150 | * | |
151 | * +32dB: 0x00 | |
152 | * +20dB: 0x0c | |
153 | * 0dB: 0x20 | |
154 | * -79dB: 0x6f | |
155 | * | |
156 | * MSB (bit 7) controls loudness: 1/0 is loudness on/off | |
157 | */ | |
158 | ||
159 | #define TDA7432_VOL_0DB 0x20 | |
160 | #define TDA7432_LD_ON 1 << 7 | |
161 | ||
162 | ||
163 | /* Subaddress 0x02 - Tone control */ | |
164 | ||
165 | /* Bits 0,1,2 control absolute treble gain from 0dB to 14dB | |
166 | * 0x0 is 14dB, 0x7 is 0dB | |
167 | * | |
168 | * Bit 3 controls treble attenuation/gain (sign) | |
169 | * 1 = gain (+) | |
170 | * 0 = attenuation (-) | |
171 | * | |
172 | * Bits 4,5,6 control absolute bass gain from 0dB to 14dB | |
173 | * (This is only true for normal base range, set in 0x00) | |
174 | * 0x0 << 4 is 14dB, 0x7 is 0dB | |
175 | * | |
176 | * Bit 7 controls bass attenuation/gain (sign) | |
177 | * 1 << 7 = gain (+) | |
178 | * 0 << 7 = attenuation (-) | |
179 | * | |
180 | * Example: | |
181 | * 1 1 0 1 0 1 0 1 is +4dB bass, -4dB treble | |
182 | */ | |
183 | ||
184 | #define TDA7432_TREBLE_0DB 0xf | |
185 | #define TDA7432_TREBLE 7 | |
186 | #define TDA7432_TREBLE_GAIN 1 << 3 | |
187 | #define TDA7432_BASS_0DB 0xf | |
188 | #define TDA7432_BASS 7 << 4 | |
189 | #define TDA7432_BASS_GAIN 1 << 7 | |
190 | ||
191 | ||
192 | /* Subaddress 0x03 - Left Front attenuation */ | |
193 | /* Subaddress 0x04 - Left Rear attenuation */ | |
194 | /* Subaddress 0x05 - Right Front attenuation */ | |
195 | /* Subaddress 0x06 - Right Rear attenuation */ | |
196 | ||
197 | /* Bits 0,1,2,3,4 control attenuation from 0dB to -37.5dB | |
198 | * in 1.5dB steps. | |
199 | * | |
200 | * 0x00 is 0dB | |
201 | * 0x1f is -37.5dB | |
202 | * | |
203 | * Bit 5 mutes that channel when set (1 = mute, 0 = unmute) | |
204 | * We'll use the mute on the input, though (above) | |
205 | * Bits 6,7 unused | |
206 | */ | |
207 | ||
208 | #define TDA7432_ATTEN_0DB 0x00 | |
209 | #define TDA7432_MUTE 0x1 << 5 | |
210 | ||
211 | ||
212 | /* Subaddress 0x07 - Loudness Control */ | |
213 | ||
214 | /* Bits 0,1,2,3 control loudness from 0dB to -15dB in 1dB steps | |
215 | * when bit 4 is NOT set | |
216 | * | |
217 | * 0x0 is 0dB | |
218 | * 0xf is -15dB | |
219 | * | |
220 | * If bit 4 is set, then there is a flat attenuation according to | |
221 | * the lower 4 bits, as above. | |
222 | * | |
223 | * Bits 5,6,7 unused | |
224 | */ | |
225 | ||
226 | ||
227 | ||
228 | /* Begin code */ | |
229 | ||
230 | static int tda7432_write(struct i2c_client *client, int subaddr, int val) | |
231 | { | |
232 | unsigned char buffer[2]; | |
233 | d2printk("tda7432: In tda7432_write\n"); | |
234 | dprintk("tda7432: Writing %d 0x%x\n", subaddr, val); | |
235 | buffer[0] = subaddr; | |
236 | buffer[1] = val; | |
237 | if (2 != i2c_master_send(client,buffer,2)) { | |
238 | printk(KERN_WARNING "tda7432: I/O error, trying (write %d 0x%x)\n", | |
239 | subaddr, val); | |
240 | return -1; | |
241 | } | |
242 | return 0; | |
243 | } | |
244 | ||
245 | /* I don't think we ever actually _read_ the chip... */ | |
1da177e4 LT |
246 | |
247 | static int tda7432_set(struct i2c_client *client) | |
248 | { | |
249 | struct tda7432 *t = i2c_get_clientdata(client); | |
250 | unsigned char buf[16]; | |
251 | d2printk("tda7432: In tda7432_set\n"); | |
252 | ||
253 | dprintk(KERN_INFO | |
254 | "tda7432: 7432_set(0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x)\n", | |
255 | t->input,t->volume,t->bass,t->treble,t->lf,t->lr,t->rf,t->rr,t->loud); | |
256 | buf[0] = TDA7432_IN; | |
257 | buf[1] = t->input; | |
258 | buf[2] = t->volume; | |
259 | buf[3] = t->bass; | |
260 | buf[4] = t->treble; | |
261 | buf[5] = t->lf; | |
262 | buf[6] = t->lr; | |
263 | buf[7] = t->rf; | |
264 | buf[8] = t->rr; | |
265 | buf[9] = t->loud; | |
266 | if (10 != i2c_master_send(client,buf,10)) { | |
267 | printk(KERN_WARNING "tda7432: I/O error, trying tda7432_set\n"); | |
268 | return -1; | |
269 | } | |
270 | ||
271 | return 0; | |
272 | } | |
273 | ||
274 | static void do_tda7432_init(struct i2c_client *client) | |
275 | { | |
276 | struct tda7432 *t = i2c_get_clientdata(client); | |
277 | d2printk("tda7432: In tda7432_init\n"); | |
278 | ||
279 | t->input = TDA7432_STEREO_IN | /* Main (stereo) input */ | |
280 | TDA7432_BASS_SYM | /* Symmetric bass cut */ | |
281 | TDA7432_BASS_NORM; /* Normal bass range */ | |
282 | t->volume = 0x3b ; /* -27dB Volume */ | |
283 | if (loudness) /* Turn loudness on? */ | |
284 | t->volume |= TDA7432_LD_ON; | |
285 | t->muted = VIDEO_AUDIO_MUTE; | |
286 | t->treble = TDA7432_TREBLE_0DB; /* 0dB Treble */ | |
287 | t->bass = TDA7432_BASS_0DB; /* 0dB Bass */ | |
288 | t->lf = TDA7432_ATTEN_0DB; /* 0dB attenuation */ | |
289 | t->lr = TDA7432_ATTEN_0DB; /* 0dB attenuation */ | |
290 | t->rf = TDA7432_ATTEN_0DB; /* 0dB attenuation */ | |
291 | t->rr = TDA7432_ATTEN_0DB; /* 0dB attenuation */ | |
292 | t->loud = loudness; /* insmod parameter */ | |
293 | ||
294 | tda7432_set(client); | |
295 | } | |
296 | ||
297 | /* *********************** * | |
298 | * i2c interface functions * | |
299 | * *********************** */ | |
300 | ||
301 | static int tda7432_attach(struct i2c_adapter *adap, int addr, int kind) | |
302 | { | |
303 | struct tda7432 *t; | |
304 | struct i2c_client *client; | |
305 | d2printk("tda7432: In tda7432_attach\n"); | |
306 | ||
307 | t = kmalloc(sizeof *t,GFP_KERNEL); | |
308 | if (!t) | |
309 | return -ENOMEM; | |
310 | memset(t,0,sizeof *t); | |
311 | ||
312 | client = &t->c; | |
313 | memcpy(client,&client_template,sizeof(struct i2c_client)); | |
314 | client->adapter = adap; | |
315 | client->addr = addr; | |
316 | i2c_set_clientdata(client, t); | |
317 | ||
318 | do_tda7432_init(client); | |
319 | printk(KERN_INFO "tda7432: init\n"); | |
320 | ||
321 | i2c_attach_client(client); | |
322 | return 0; | |
323 | } | |
324 | ||
325 | static int tda7432_probe(struct i2c_adapter *adap) | |
326 | { | |
327 | #ifdef I2C_CLASS_TV_ANALOG | |
328 | if (adap->class & I2C_CLASS_TV_ANALOG) | |
329 | return i2c_probe(adap, &addr_data, tda7432_attach); | |
330 | #else | |
331 | if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848)) | |
332 | return i2c_probe(adap, &addr_data, tda7432_attach); | |
333 | #endif | |
334 | return 0; | |
335 | } | |
336 | ||
337 | static int tda7432_detach(struct i2c_client *client) | |
338 | { | |
339 | struct tda7432 *t = i2c_get_clientdata(client); | |
340 | ||
341 | do_tda7432_init(client); | |
342 | i2c_detach_client(client); | |
343 | ||
344 | kfree(t); | |
345 | return 0; | |
346 | } | |
347 | ||
348 | static int tda7432_command(struct i2c_client *client, | |
349 | unsigned int cmd, void *arg) | |
350 | { | |
351 | struct tda7432 *t = i2c_get_clientdata(client); | |
352 | d2printk("tda7432: In tda7432_command\n"); | |
353 | ||
354 | switch (cmd) { | |
355 | /* --- v4l ioctls --- */ | |
356 | /* take care: bttv does userspace copying, we'll get a | |
357 | kernel pointer here... */ | |
358 | ||
359 | /* Query card - scale from TDA7432 settings to V4L settings */ | |
360 | case VIDIOCGAUDIO: | |
361 | { | |
362 | struct video_audio *va = arg; | |
363 | dprintk("tda7432: VIDIOCGAUDIO\n"); | |
364 | ||
365 | va->flags |= VIDEO_AUDIO_VOLUME | | |
366 | VIDEO_AUDIO_BASS | | |
367 | VIDEO_AUDIO_TREBLE | | |
368 | VIDEO_AUDIO_MUTABLE; | |
369 | if (t->muted) | |
370 | va->flags |= VIDEO_AUDIO_MUTE; | |
371 | va->mode |= VIDEO_SOUND_STEREO; | |
372 | /* Master volume control | |
373 | * V4L volume is min 0, max 65535 | |
374 | * TDA7432 Volume: | |
375 | * Min (-79dB) is 0x6f | |
376 | * Max (+20dB) is 0x07 (630) | |
377 | * Max (0dB) is 0x20 (829) | |
378 | * (Mask out bit 7 of vol - it's for the loudness setting) | |
379 | */ | |
380 | if (!maxvol){ /* max +20db */ | |
381 | va->volume = ( 0x6f - (t->volume & 0x7F) ) * 630; | |
382 | } else { /* max 0db */ | |
383 | va->volume = ( 0x6f - (t->volume & 0x7F) ) * 829; | |
384 | } | |
385 | ||
386 | /* Balance depends on L,R attenuation | |
387 | * V4L balance is 0 to 65535, middle is 32768 | |
388 | * TDA7432 attenuation: min (0dB) is 0, max (-37.5dB) is 0x1f | |
389 | * to scale up to V4L numbers, mult by 1057 | |
390 | * attenuation exists for lf, lr, rf, rr | |
391 | * we use only lf and rf (front channels) | |
392 | */ | |
393 | ||
394 | if ( (t->lf) < (t->rf) ) | |
395 | /* right is attenuated, balance shifted left */ | |
396 | va->balance = (32768 - 1057*(t->rf)); | |
397 | else | |
398 | /* left is attenuated, balance shifted right */ | |
399 | va->balance = (32768 + 1057*(t->lf)); | |
400 | ||
401 | /* Bass/treble 4 bits each */ | |
402 | va->bass=t->bass; | |
403 | if(va->bass >= 0x8) | |
404 | va->bass = ~(va->bass - 0x8) & 0xf; | |
405 | va->bass = (va->bass << 12)+(va->bass << 8)+(va->bass << 4)+(va->bass); | |
406 | va->treble=t->treble; | |
407 | if(va->treble >= 0x8) | |
408 | va->treble = ~(va->treble - 0x8) & 0xf; | |
409 | va->treble = (va->treble << 12)+(va->treble << 8)+(va->treble << 4)+(va->treble); | |
410 | ||
411 | break; /* VIDIOCGAUDIO case */ | |
412 | } | |
413 | ||
414 | /* Set card - scale from V4L settings to TDA7432 settings */ | |
415 | case VIDIOCSAUDIO: | |
416 | { | |
417 | struct video_audio *va = arg; | |
418 | dprintk("tda7432: VIDEOCSAUDIO\n"); | |
419 | ||
420 | if(va->flags & VIDEO_AUDIO_VOLUME){ | |
421 | if(!maxvol){ /* max +20db */ | |
422 | t->volume = 0x6f - ((va->volume)/630); | |
423 | } else { /* max 0db */ | |
424 | t->volume = 0x6f - ((va->volume)/829); | |
425 | } | |
426 | ||
427 | if (loudness) /* Turn on the loudness bit */ | |
428 | t->volume |= TDA7432_LD_ON; | |
429 | ||
430 | tda7432_write(client,TDA7432_VL, t->volume); | |
431 | } | |
432 | ||
433 | if(va->flags & VIDEO_AUDIO_BASS) | |
434 | { | |
435 | t->bass = va->bass >> 12; | |
436 | if(t->bass>= 0x8) | |
437 | t->bass = (~t->bass & 0xf) + 0x8 ; | |
438 | } | |
439 | if(va->flags & VIDEO_AUDIO_TREBLE) | |
440 | { | |
441 | t->treble= va->treble >> 12; | |
442 | if(t->treble>= 0x8) | |
443 | t->treble = (~t->treble & 0xf) + 0x8 ; | |
444 | } | |
445 | if(va->flags & (VIDEO_AUDIO_TREBLE| VIDEO_AUDIO_BASS)) | |
446 | tda7432_write(client,TDA7432_TN, 0x10 | (t->bass << 4) | t->treble ); | |
447 | ||
448 | if(va->flags & VIDEO_AUDIO_BALANCE) { | |
449 | if (va->balance < 32768) | |
450 | { | |
451 | /* shifted to left, attenuate right */ | |
452 | t->rr = (32768 - va->balance)/1057; | |
453 | t->rf = t->rr; | |
454 | t->lr = TDA7432_ATTEN_0DB; | |
455 | t->lf = TDA7432_ATTEN_0DB; | |
456 | } | |
457 | else if(va->balance > 32769) | |
458 | { | |
459 | /* shifted to right, attenuate left */ | |
460 | t->lf = (va->balance - 32768)/1057; | |
461 | t->lr = t->lf; | |
462 | t->rr = TDA7432_ATTEN_0DB; | |
463 | t->rf = TDA7432_ATTEN_0DB; | |
464 | } | |
465 | else | |
466 | { | |
467 | /* centered */ | |
468 | t->rr = TDA7432_ATTEN_0DB; | |
469 | t->rf = TDA7432_ATTEN_0DB; | |
470 | t->lf = TDA7432_ATTEN_0DB; | |
471 | t->lr = TDA7432_ATTEN_0DB; | |
472 | } | |
473 | } | |
474 | ||
475 | t->muted=(va->flags & VIDEO_AUDIO_MUTE); | |
476 | if (t->muted) | |
477 | { | |
478 | /* Mute & update balance*/ | |
479 | tda7432_write(client,TDA7432_LF, t->lf | TDA7432_MUTE); | |
480 | tda7432_write(client,TDA7432_LR, t->lr | TDA7432_MUTE); | |
481 | tda7432_write(client,TDA7432_RF, t->rf | TDA7432_MUTE); | |
482 | tda7432_write(client,TDA7432_RR, t->rr | TDA7432_MUTE); | |
483 | } else { | |
484 | tda7432_write(client,TDA7432_LF, t->lf); | |
485 | tda7432_write(client,TDA7432_LR, t->lr); | |
486 | tda7432_write(client,TDA7432_RF, t->rf); | |
487 | tda7432_write(client,TDA7432_RR, t->rr); | |
488 | } | |
489 | ||
490 | break; | |
491 | ||
492 | } /* end of VIDEOCSAUDIO case */ | |
493 | ||
494 | default: /* Not VIDEOCGAUDIO or VIDEOCSAUDIO */ | |
495 | ||
496 | /* nothing */ | |
497 | d2printk("tda7432: Default\n"); | |
498 | ||
499 | } /* end of (cmd) switch */ | |
500 | ||
501 | return 0; | |
502 | } | |
503 | ||
504 | static struct i2c_driver driver = { | |
505 | .owner = THIS_MODULE, | |
506 | .name = "i2c tda7432 driver", | |
507 | .id = I2C_DRIVERID_TDA7432, | |
508 | .flags = I2C_DF_NOTIFY, | |
509 | .attach_adapter = tda7432_probe, | |
510 | .detach_client = tda7432_detach, | |
511 | .command = tda7432_command, | |
512 | }; | |
513 | ||
514 | static struct i2c_client client_template = | |
515 | { | |
516 | I2C_DEVNAME("tda7432"), | |
517 | .driver = &driver, | |
518 | }; | |
519 | ||
520 | static int __init tda7432_init(void) | |
521 | { | |
522 | if ( (loudness < 0) || (loudness > 15) ) { | |
523 | printk(KERN_ERR "tda7432: loudness parameter must be between 0 and 15\n"); | |
524 | return -EINVAL; | |
525 | } | |
526 | ||
527 | return i2c_add_driver(&driver); | |
528 | } | |
529 | ||
530 | static void __exit tda7432_fini(void) | |
531 | { | |
532 | i2c_del_driver(&driver); | |
533 | } | |
534 | ||
535 | module_init(tda7432_init); | |
536 | module_exit(tda7432_fini); | |
537 | ||
538 | /* | |
539 | * Local variables: | |
540 | * c-basic-offset: 8 | |
541 | * End: | |
542 | */ |