]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/message/fusion/mptbase.c | |
1da177e4 LT |
3 | * This is the Fusion MPT base driver which supports multiple |
4 | * (SCSI + LAN) specialized protocol drivers. | |
f36789e2 PS |
5 | * For use with LSI PCI chip/adapter(s) |
6 | * running LSI Fusion MPT (Message Passing Technology) firmware. | |
1da177e4 | 7 | * |
cddc0ab7 | 8 | * Copyright (c) 1999-2008 LSI Corporation |
16d20101 | 9 | * (mailto:DL-MPTFusionLinux@lsi.com) |
1da177e4 | 10 | * |
1da177e4 LT |
11 | */ |
12 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
13 | /* | |
14 | This program is free software; you can redistribute it and/or modify | |
15 | it under the terms of the GNU General Public License as published by | |
16 | the Free Software Foundation; version 2 of the License. | |
17 | ||
18 | This program is distributed in the hope that it will be useful, | |
19 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
20 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
21 | GNU General Public License for more details. | |
22 | ||
23 | NO WARRANTY | |
24 | THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
25 | CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
26 | LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
27 | MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
28 | solely responsible for determining the appropriateness of using and | |
29 | distributing the Program and assumes all risks associated with its | |
30 | exercise of rights under this Agreement, including but not limited to | |
31 | the risks and costs of program errors, damage to or loss of data, | |
32 | programs or equipment, and unavailability or interruption of operations. | |
33 | ||
34 | DISCLAIMER OF LIABILITY | |
35 | NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
36 | DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
37 | DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
38 | ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
39 | TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
40 | USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
41 | HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
42 | ||
43 | You should have received a copy of the GNU General Public License | |
44 | along with this program; if not, write to the Free Software | |
45 | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
46 | */ | |
47 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
48 | ||
1da177e4 LT |
49 | #include <linux/kernel.h> |
50 | #include <linux/module.h> | |
51 | #include <linux/errno.h> | |
52 | #include <linux/init.h> | |
eb6edad3 | 53 | #include <linux/seq_file.h> |
1da177e4 LT |
54 | #include <linux/slab.h> |
55 | #include <linux/types.h> | |
56 | #include <linux/pci.h> | |
57 | #include <linux/kdev_t.h> | |
58 | #include <linux/blkdev.h> | |
59 | #include <linux/delay.h> | |
60 | #include <linux/interrupt.h> /* needed for in_interrupt() proto */ | |
7fadc87e | 61 | #include <linux/dma-mapping.h> |
1da177e4 LT |
62 | #include <asm/io.h> |
63 | #ifdef CONFIG_MTRR | |
64 | #include <asm/mtrr.h> | |
65 | #endif | |
e62cca19 | 66 | #include <linux/kthread.h> |
67 | #include <scsi/scsi_host.h> | |
1da177e4 LT |
68 | |
69 | #include "mptbase.h" | |
7c431e5c | 70 | #include "lsi/mpi_log_fc.h" |
1da177e4 LT |
71 | |
72 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
73 | #define my_NAME "Fusion MPT base driver" | |
74 | #define my_VERSION MPT_LINUX_VERSION_COMMON | |
75 | #define MYNAM "mptbase" | |
76 | ||
77 | MODULE_AUTHOR(MODULEAUTHOR); | |
78 | MODULE_DESCRIPTION(my_NAME); | |
79 | MODULE_LICENSE("GPL"); | |
9f4203b3 | 80 | MODULE_VERSION(my_VERSION); |
1da177e4 LT |
81 | |
82 | /* | |
83 | * cmd line parameters | |
84 | */ | |
e382968b KD |
85 | |
86 | static int mpt_msi_enable_spi; | |
87 | module_param(mpt_msi_enable_spi, int, 0); | |
85ee7a1d JP |
88 | MODULE_PARM_DESC(mpt_msi_enable_spi, |
89 | " Enable MSI Support for SPI controllers (default=0)"); | |
e382968b KD |
90 | |
91 | static int mpt_msi_enable_fc; | |
92 | module_param(mpt_msi_enable_fc, int, 0); | |
85ee7a1d JP |
93 | MODULE_PARM_DESC(mpt_msi_enable_fc, |
94 | " Enable MSI Support for FC controllers (default=0)"); | |
e382968b KD |
95 | |
96 | static int mpt_msi_enable_sas; | |
5ce7868e | 97 | module_param(mpt_msi_enable_sas, int, 0); |
85ee7a1d JP |
98 | MODULE_PARM_DESC(mpt_msi_enable_sas, |
99 | " Enable MSI Support for SAS controllers (default=0)"); | |
4ddce14e | 100 | |
793955f5 EM |
101 | static int mpt_channel_mapping; |
102 | module_param(mpt_channel_mapping, int, 0); | |
103 | MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)"); | |
104 | ||
436ace72 | 105 | static int mpt_debug_level; |
db47c2d8 JB |
106 | static int mpt_set_debug_level(const char *val, struct kernel_param *kp); |
107 | module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int, | |
108 | &mpt_debug_level, 0600); | |
85ee7a1d JP |
109 | MODULE_PARM_DESC(mpt_debug_level, |
110 | " debug level - refer to mptdebug.h - (default=0)"); | |
e382968b | 111 | |
2f4c782c KD |
112 | int mpt_fwfault_debug; |
113 | EXPORT_SYMBOL(mpt_fwfault_debug); | |
57ba4717 | 114 | module_param(mpt_fwfault_debug, int, 0600); |
85ee7a1d JP |
115 | MODULE_PARM_DESC(mpt_fwfault_debug, |
116 | "Enable detection of Firmware fault and halt Firmware on fault - (default=0)"); | |
2f4c782c | 117 | |
8af3d8d5 FW |
118 | static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS] |
119 | [MPT_MAX_CALLBACKNAME_LEN+1]; | |
436ace72 | 120 | |
1da177e4 LT |
121 | #ifdef MFCNT |
122 | static int mfcounter = 0; | |
123 | #define PRINT_MF_COUNT 20000 | |
124 | #endif | |
125 | ||
126 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
127 | /* | |
128 | * Public data... | |
129 | */ | |
1da177e4 | 130 | |
1da177e4 LT |
131 | #define WHOINIT_UNKNOWN 0xAA |
132 | ||
133 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
134 | /* | |
135 | * Private data... | |
136 | */ | |
137 | /* Adapter link list */ | |
138 | LIST_HEAD(ioc_list); | |
139 | /* Callback lookup table */ | |
140 | static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS]; | |
141 | /* Protocol driver class lookup table */ | |
142 | static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS]; | |
143 | /* Event handler lookup table */ | |
144 | static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS]; | |
145 | /* Reset handler lookup table */ | |
146 | static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS]; | |
147 | static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS]; | |
148 | ||
e47c11c7 EE |
149 | #ifdef CONFIG_PROC_FS |
150 | static struct proc_dir_entry *mpt_proc_root_dir; | |
151 | #endif | |
1da177e4 | 152 | |
f606f571 PS |
153 | /* |
154 | * Driver Callback Index's | |
155 | */ | |
156 | static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS; | |
157 | static u8 last_drv_idx; | |
158 | ||
1da177e4 LT |
159 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
160 | /* | |
161 | * Forward protos... | |
162 | */ | |
7d12e780 | 163 | static irqreturn_t mpt_interrupt(int irq, void *bus_id); |
f0f09d3b KD |
164 | static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, |
165 | MPT_FRAME_HDR *reply); | |
1da177e4 LT |
166 | static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, |
167 | u32 *req, int replyBytes, u16 *u16reply, int maxwait, | |
168 | int sleepFlag); | |
169 | static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag); | |
170 | static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev); | |
171 | static void mpt_adapter_disable(MPT_ADAPTER *ioc); | |
172 | static void mpt_adapter_dispose(MPT_ADAPTER *ioc); | |
173 | ||
174 | static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc); | |
175 | static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag); | |
1da177e4 LT |
176 | static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason); |
177 | static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag); | |
178 | static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag); | |
179 | static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag); | |
180 | static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag); | |
82ffb671 | 181 | static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag); |
1da177e4 LT |
182 | static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag); |
183 | static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag); | |
184 | static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag); | |
185 | static int PrimeIocFifos(MPT_ADAPTER *ioc); | |
186 | static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag); | |
187 | static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag); | |
188 | static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag); | |
189 | static int GetLanConfigPages(MPT_ADAPTER *ioc); | |
1da177e4 | 190 | static int GetIoUnitPage2(MPT_ADAPTER *ioc); |
82ffb671 | 191 | int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); |
1da177e4 LT |
192 | static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum); |
193 | static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum); | |
194 | static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc); | |
195 | static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc); | |
edb9068d | 196 | static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc); |
fd76175a KD |
197 | static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, |
198 | int sleepFlag); | |
1da177e4 | 199 | static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp); |
82ffb671 CH |
200 | static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag); |
201 | static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init); | |
1da177e4 LT |
202 | |
203 | #ifdef CONFIG_PROC_FS | |
eb6edad3 AD |
204 | static const struct file_operations mpt_summary_proc_fops; |
205 | static const struct file_operations mpt_version_proc_fops; | |
206 | static const struct file_operations mpt_iocinfo_proc_fops; | |
1da177e4 LT |
207 | #endif |
208 | static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); | |
209 | ||
fd76175a KD |
210 | static int ProcessEventNotification(MPT_ADAPTER *ioc, |
211 | EventNotificationReply_t *evReply, int *evHandlers); | |
c6c727a1 | 212 | static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); |
1da177e4 | 213 | static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); |
335a9412 | 214 | static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info); |
213aaca3 | 215 | static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx); |
c972c70f | 216 | static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); |
b506ade9 | 217 | static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc); |
1da177e4 LT |
218 | |
219 | /* module entry point */ | |
1da177e4 LT |
220 | static int __init fusion_init (void); |
221 | static void __exit fusion_exit (void); | |
222 | ||
1da177e4 LT |
223 | #define CHIPREG_READ32(addr) readl_relaxed(addr) |
224 | #define CHIPREG_READ32_dmasync(addr) readl(addr) | |
225 | #define CHIPREG_WRITE32(addr,val) writel(val, addr) | |
226 | #define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr) | |
227 | #define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr) | |
228 | ||
3fadc59d MED |
229 | static void |
230 | pci_disable_io_access(struct pci_dev *pdev) | |
231 | { | |
232 | u16 command_reg; | |
233 | ||
234 | pci_read_config_word(pdev, PCI_COMMAND, &command_reg); | |
235 | command_reg &= ~1; | |
236 | pci_write_config_word(pdev, PCI_COMMAND, command_reg); | |
237 | } | |
238 | ||
239 | static void | |
240 | pci_enable_io_access(struct pci_dev *pdev) | |
241 | { | |
242 | u16 command_reg; | |
243 | ||
244 | pci_read_config_word(pdev, PCI_COMMAND, &command_reg); | |
245 | command_reg |= 1; | |
246 | pci_write_config_word(pdev, PCI_COMMAND, command_reg); | |
247 | } | |
248 | ||
db47c2d8 JB |
249 | static int mpt_set_debug_level(const char *val, struct kernel_param *kp) |
250 | { | |
251 | int ret = param_set_int(val, kp); | |
252 | MPT_ADAPTER *ioc; | |
253 | ||
254 | if (ret) | |
255 | return ret; | |
256 | ||
257 | list_for_each_entry(ioc, &ioc_list, list) | |
258 | ioc->debug_level = mpt_debug_level; | |
259 | return 0; | |
260 | } | |
261 | ||
f606f571 PS |
262 | /** |
263 | * mpt_get_cb_idx - obtain cb_idx for registered driver | |
264 | * @dclass: class driver enum | |
265 | * | |
266 | * Returns cb_idx, or zero means it wasn't found | |
267 | **/ | |
268 | static u8 | |
269 | mpt_get_cb_idx(MPT_DRIVER_CLASS dclass) | |
270 | { | |
271 | u8 cb_idx; | |
272 | ||
273 | for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) | |
274 | if (MptDriverClass[cb_idx] == dclass) | |
275 | return cb_idx; | |
276 | return 0; | |
277 | } | |
278 | ||
7b5a65b9 KD |
279 | /** |
280 | * mpt_is_discovery_complete - determine if discovery has completed | |
281 | * @ioc: per adatper instance | |
282 | * | |
283 | * Returns 1 when discovery completed, else zero. | |
284 | */ | |
285 | static int | |
286 | mpt_is_discovery_complete(MPT_ADAPTER *ioc) | |
287 | { | |
288 | ConfigExtendedPageHeader_t hdr; | |
289 | CONFIGPARMS cfg; | |
290 | SasIOUnitPage0_t *buffer; | |
291 | dma_addr_t dma_handle; | |
292 | int rc = 0; | |
293 | ||
294 | memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t)); | |
295 | memset(&cfg, 0, sizeof(CONFIGPARMS)); | |
296 | hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION; | |
297 | hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; | |
298 | hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; | |
299 | cfg.cfghdr.ehdr = &hdr; | |
300 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
301 | ||
302 | if ((mpt_config(ioc, &cfg))) | |
303 | goto out; | |
304 | if (!hdr.ExtPageLength) | |
305 | goto out; | |
306 | ||
307 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
308 | &dma_handle); | |
309 | if (!buffer) | |
310 | goto out; | |
311 | ||
312 | cfg.physAddr = dma_handle; | |
313 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
314 | ||
315 | if ((mpt_config(ioc, &cfg))) | |
316 | goto out_free_consistent; | |
317 | ||
318 | if (!(buffer->PhyData[0].PortFlags & | |
319 | MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS)) | |
320 | rc = 1; | |
321 | ||
322 | out_free_consistent: | |
323 | pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
324 | buffer, dma_handle); | |
325 | out: | |
326 | return rc; | |
327 | } | |
328 | ||
e62cca19 | 329 | |
330 | /** | |
331 | * mpt_remove_dead_ioc_func - kthread context to remove dead ioc | |
332 | * @arg: input argument, used to derive ioc | |
333 | * | |
334 | * Return 0 if controller is removed from pci subsystem. | |
335 | * Return -1 for other case. | |
336 | */ | |
337 | static int mpt_remove_dead_ioc_func(void *arg) | |
338 | { | |
339 | MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; | |
340 | struct pci_dev *pdev; | |
341 | ||
342 | if ((ioc == NULL)) | |
343 | return -1; | |
344 | ||
345 | pdev = ioc->pcidev; | |
346 | if ((pdev == NULL)) | |
347 | return -1; | |
348 | ||
210647af | 349 | pci_stop_and_remove_bus_device(pdev); |
e62cca19 | 350 | return 0; |
351 | } | |
352 | ||
353 | ||
354 | ||
d54d48b8 PS |
355 | /** |
356 | * mpt_fault_reset_work - work performed on workq after ioc fault | |
357 | * @work: input argument, used to derive ioc | |
358 | * | |
359 | **/ | |
360 | static void | |
361 | mpt_fault_reset_work(struct work_struct *work) | |
362 | { | |
363 | MPT_ADAPTER *ioc = | |
364 | container_of(work, MPT_ADAPTER, fault_reset_work.work); | |
365 | u32 ioc_raw_state; | |
366 | int rc; | |
367 | unsigned long flags; | |
e62cca19 | 368 | MPT_SCSI_HOST *hd; |
369 | struct task_struct *p; | |
d54d48b8 | 370 | |
1ba9ab2e | 371 | if (ioc->ioc_reset_in_progress || !ioc->active) |
d54d48b8 PS |
372 | goto out; |
373 | ||
e62cca19 | 374 | |
d54d48b8 | 375 | ioc_raw_state = mpt_GetIocState(ioc, 0); |
e62cca19 | 376 | if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) { |
377 | printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n", | |
378 | ioc->name, __func__); | |
379 | ||
380 | /* | |
381 | * Call mptscsih_flush_pending_cmds callback so that we | |
382 | * flush all pending commands back to OS. | |
383 | * This call is required to aovid deadlock at block layer. | |
384 | * Dead IOC will fail to do diag reset,and this call is safe | |
385 | * since dead ioc will never return any command back from HW. | |
386 | */ | |
387 | hd = shost_priv(ioc->sh); | |
388 | ioc->schedule_dead_ioc_flush_running_cmds(hd); | |
389 | ||
390 | /*Remove the Dead Host */ | |
391 | p = kthread_run(mpt_remove_dead_ioc_func, ioc, | |
392 | "mpt_dead_ioc_%d", ioc->id); | |
393 | if (IS_ERR(p)) { | |
394 | printk(MYIOC_s_ERR_FMT | |
395 | "%s: Running mpt_dead_ioc thread failed !\n", | |
396 | ioc->name, __func__); | |
397 | } else { | |
398 | printk(MYIOC_s_WARN_FMT | |
399 | "%s: Running mpt_dead_ioc thread success !\n", | |
400 | ioc->name, __func__); | |
401 | } | |
402 | return; /* don't rearm timer */ | |
403 | } | |
404 | ||
405 | if ((ioc_raw_state & MPI_IOC_STATE_MASK) | |
406 | == MPI_IOC_STATE_FAULT) { | |
d54d48b8 | 407 | printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n", |
cadbd4a5 | 408 | ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); |
d54d48b8 | 409 | printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", |
cadbd4a5 | 410 | ioc->name, __func__); |
d54d48b8 PS |
411 | rc = mpt_HardResetHandler(ioc, CAN_SLEEP); |
412 | printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name, | |
cadbd4a5 | 413 | __func__, (rc == 0) ? "success" : "failed"); |
d54d48b8 PS |
414 | ioc_raw_state = mpt_GetIocState(ioc, 0); |
415 | if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) | |
416 | printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after " | |
417 | "reset (%04xh)\n", ioc->name, ioc_raw_state & | |
418 | MPI_DOORBELL_DATA_MASK); | |
7b5a65b9 KD |
419 | } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) { |
420 | if ((mpt_is_discovery_complete(ioc))) { | |
421 | devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing " | |
422 | "discovery_quiesce_io flag\n", ioc->name)); | |
423 | ioc->sas_discovery_quiesce_io = 0; | |
424 | } | |
d54d48b8 PS |
425 | } |
426 | ||
427 | out: | |
428 | /* | |
429 | * Take turns polling alternate controller | |
430 | */ | |
431 | if (ioc->alt_ioc) | |
432 | ioc = ioc->alt_ioc; | |
433 | ||
434 | /* rearm the timer */ | |
2f187862 | 435 | spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
d54d48b8 PS |
436 | if (ioc->reset_work_q) |
437 | queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, | |
438 | msecs_to_jiffies(MPT_POLLING_INTERVAL)); | |
2f187862 | 439 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
d54d48b8 PS |
440 | } |
441 | ||
442 | ||
466544d8 MED |
443 | /* |
444 | * Process turbo (context) reply... | |
445 | */ | |
446 | static void | |
447 | mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa) | |
448 | { | |
449 | MPT_FRAME_HDR *mf = NULL; | |
450 | MPT_FRAME_HDR *mr = NULL; | |
f606f571 PS |
451 | u16 req_idx = 0; |
452 | u8 cb_idx; | |
466544d8 | 453 | |
436ace72 | 454 | dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n", |
466544d8 MED |
455 | ioc->name, pa)); |
456 | ||
457 | switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) { | |
458 | case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT: | |
459 | req_idx = pa & 0x0000FFFF; | |
460 | cb_idx = (pa & 0x00FF0000) >> 16; | |
461 | mf = MPT_INDEX_2_MFPTR(ioc, req_idx); | |
462 | break; | |
463 | case MPI_CONTEXT_REPLY_TYPE_LAN: | |
f606f571 | 464 | cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER); |
466544d8 MED |
465 | /* |
466 | * Blind set of mf to NULL here was fatal | |
467 | * after lan_reply says "freeme" | |
468 | * Fix sort of combined with an optimization here; | |
469 | * added explicit check for case where lan_reply | |
470 | * was just returning 1 and doing nothing else. | |
471 | * For this case skip the callback, but set up | |
472 | * proper mf value first here:-) | |
473 | */ | |
474 | if ((pa & 0x58000000) == 0x58000000) { | |
475 | req_idx = pa & 0x0000FFFF; | |
476 | mf = MPT_INDEX_2_MFPTR(ioc, req_idx); | |
477 | mpt_free_msg_frame(ioc, mf); | |
478 | mb(); | |
479 | return; | |
480 | break; | |
481 | } | |
482 | mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); | |
483 | break; | |
484 | case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET: | |
f606f571 | 485 | cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER); |
466544d8 MED |
486 | mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); |
487 | break; | |
488 | default: | |
489 | cb_idx = 0; | |
490 | BUG(); | |
491 | } | |
492 | ||
493 | /* Check for (valid) IO callback! */ | |
f606f571 | 494 | if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || |
8d6d83e9 | 495 | MptCallbacks[cb_idx] == NULL) { |
466544d8 | 496 | printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", |
cadbd4a5 | 497 | __func__, ioc->name, cb_idx); |
466544d8 MED |
498 | goto out; |
499 | } | |
500 | ||
501 | if (MptCallbacks[cb_idx](ioc, mf, mr)) | |
502 | mpt_free_msg_frame(ioc, mf); | |
503 | out: | |
504 | mb(); | |
505 | } | |
506 | ||
507 | static void | |
508 | mpt_reply(MPT_ADAPTER *ioc, u32 pa) | |
509 | { | |
510 | MPT_FRAME_HDR *mf; | |
511 | MPT_FRAME_HDR *mr; | |
f606f571 PS |
512 | u16 req_idx; |
513 | u8 cb_idx; | |
466544d8 MED |
514 | int freeme; |
515 | ||
516 | u32 reply_dma_low; | |
517 | u16 ioc_stat; | |
518 | ||
519 | /* non-TURBO reply! Hmmm, something may be up... | |
520 | * Newest turbo reply mechanism; get address | |
521 | * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! | |
522 | */ | |
523 | ||
524 | /* Map DMA address of reply header to cpu address. | |
525 | * pa is 32 bits - but the dma address may be 32 or 64 bits | |
526 | * get offset based only only the low addresses | |
527 | */ | |
528 | ||
529 | reply_dma_low = (pa <<= 1); | |
530 | mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + | |
531 | (reply_dma_low - ioc->reply_frames_low_dma)); | |
532 | ||
533 | req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); | |
534 | cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; | |
535 | mf = MPT_INDEX_2_MFPTR(ioc, req_idx); | |
536 | ||
436ace72 | 537 | dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", |
466544d8 | 538 | ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function)); |
29dd3609 | 539 | DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr); |
466544d8 MED |
540 | |
541 | /* Check/log IOC log info | |
542 | */ | |
543 | ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); | |
544 | if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { | |
545 | u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); | |
546 | if (ioc->bus_type == FC) | |
547 | mpt_fc_log_info(ioc, log_info); | |
a9b2937a | 548 | else if (ioc->bus_type == SPI) |
335a9412 | 549 | mpt_spi_log_info(ioc, log_info); |
466544d8 | 550 | else if (ioc->bus_type == SAS) |
213aaca3 | 551 | mpt_sas_log_info(ioc, log_info, cb_idx); |
466544d8 | 552 | } |
466544d8 | 553 | |
c6c727a1 EM |
554 | if (ioc_stat & MPI_IOCSTATUS_MASK) |
555 | mpt_iocstatus_info(ioc, (u32)ioc_stat, mf); | |
466544d8 MED |
556 | |
557 | /* Check for (valid) IO callback! */ | |
f606f571 | 558 | if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || |
8d6d83e9 | 559 | MptCallbacks[cb_idx] == NULL) { |
466544d8 | 560 | printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", |
cadbd4a5 | 561 | __func__, ioc->name, cb_idx); |
466544d8 MED |
562 | freeme = 0; |
563 | goto out; | |
564 | } | |
565 | ||
566 | freeme = MptCallbacks[cb_idx](ioc, mf, mr); | |
567 | ||
568 | out: | |
569 | /* Flush (non-TURBO) reply with a WRITE! */ | |
570 | CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); | |
571 | ||
572 | if (freeme) | |
573 | mpt_free_msg_frame(ioc, mf); | |
574 | mb(); | |
575 | } | |
576 | ||
1da177e4 | 577 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
d9489fb6 | 578 | /** |
1da177e4 LT |
579 | * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. |
580 | * @irq: irq number (not used) | |
581 | * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure | |
1da177e4 LT |
582 | * |
583 | * This routine is registered via the request_irq() kernel API call, | |
584 | * and handles all interrupts generated from a specific MPT adapter | |
585 | * (also referred to as a IO Controller or IOC). | |
586 | * This routine must clear the interrupt from the adapter and does | |
587 | * so by reading the reply FIFO. Multiple replies may be processed | |
c6678e0c | 588 | * per single call to this routine. |
1da177e4 LT |
589 | * |
590 | * This routine handles register-level access of the adapter but | |
591 | * dispatches (calls) a protocol-specific callback routine to handle | |
592 | * the protocol-specific details of the MPT request completion. | |
593 | */ | |
594 | static irqreturn_t | |
7d12e780 | 595 | mpt_interrupt(int irq, void *bus_id) |
1da177e4 | 596 | { |
466544d8 | 597 | MPT_ADAPTER *ioc = bus_id; |
3e00a5b2 EM |
598 | u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); |
599 | ||
600 | if (pa == 0xFFFFFFFF) | |
601 | return IRQ_NONE; | |
1da177e4 LT |
602 | |
603 | /* | |
604 | * Drain the reply FIFO! | |
1da177e4 | 605 | */ |
3e00a5b2 EM |
606 | do { |
607 | if (pa & MPI_ADDRESS_REPLY_A_BIT) | |
466544d8 MED |
608 | mpt_reply(ioc, pa); |
609 | else | |
610 | mpt_turbo_reply(ioc, pa); | |
3e00a5b2 EM |
611 | pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); |
612 | } while (pa != 0xFFFFFFFF); | |
1da177e4 LT |
613 | |
614 | return IRQ_HANDLED; | |
615 | } | |
616 | ||
617 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 618 | /** |
f0f09d3b | 619 | * mptbase_reply - MPT base driver's callback routine |
1da177e4 | 620 | * @ioc: Pointer to MPT_ADAPTER structure |
f0f09d3b | 621 | * @req: Pointer to original MPT request frame |
1da177e4 LT |
622 | * @reply: Pointer to MPT reply frame (NULL if TurboReply) |
623 | * | |
d9489fb6 RD |
624 | * MPT base driver's callback routine; all base driver |
625 | * "internal" request/reply processing is routed here. | |
626 | * Currently used for EventNotification and EventAck handling. | |
627 | * | |
c6678e0c | 628 | * Returns 1 indicating original alloc'd request frame ptr |
1da177e4 LT |
629 | * should be freed, or 0 if it shouldn't. |
630 | */ | |
631 | static int | |
f0f09d3b | 632 | mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) |
1da177e4 | 633 | { |
f0f09d3b KD |
634 | EventNotificationReply_t *pEventReply; |
635 | u8 event; | |
636 | int evHandlers; | |
1da177e4 | 637 | int freereq = 1; |
1da177e4 | 638 | |
f0f09d3b KD |
639 | switch (reply->u.hdr.Function) { |
640 | case MPI_FUNCTION_EVENT_NOTIFICATION: | |
641 | pEventReply = (EventNotificationReply_t *)reply; | |
642 | evHandlers = 0; | |
643 | ProcessEventNotification(ioc, pEventReply, &evHandlers); | |
644 | event = le32_to_cpu(pEventReply->Event) & 0xFF; | |
645 | if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) | |
1da177e4 | 646 | freereq = 0; |
f0f09d3b KD |
647 | if (event != MPI_EVENT_EVENT_CHANGE) |
648 | break; | |
649 | case MPI_FUNCTION_CONFIG: | |
650 | case MPI_FUNCTION_SAS_IO_UNIT_CONTROL: | |
651 | ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; | |
652 | if (reply) { | |
653 | ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID; | |
654 | memcpy(ioc->mptbase_cmds.reply, reply, | |
655 | min(MPT_DEFAULT_FRAME_SIZE, | |
656 | 4 * reply->u.reply.MsgLength)); | |
1da177e4 | 657 | } |
f0f09d3b KD |
658 | if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { |
659 | ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING; | |
660 | complete(&ioc->mptbase_cmds.done); | |
661 | } else | |
662 | freereq = 0; | |
663 | if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF) | |
664 | freereq = 1; | |
665 | break; | |
666 | case MPI_FUNCTION_EVENT_ACK: | |
667 | devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
668 | "EventAck reply received\n", ioc->name)); | |
669 | break; | |
670 | default: | |
671 | printk(MYIOC_s_ERR_FMT | |
672 | "Unexpected msg function (=%02Xh) reply received!\n", | |
673 | ioc->name, reply->u.hdr.Function); | |
674 | break; | |
1da177e4 LT |
675 | } |
676 | ||
677 | /* | |
678 | * Conditionally tell caller to free the original | |
679 | * EventNotification/EventAck/unexpected request frame! | |
680 | */ | |
681 | return freereq; | |
682 | } | |
683 | ||
684 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
685 | /** | |
686 | * mpt_register - Register protocol-specific main callback handler. | |
687 | * @cbfunc: callback function pointer | |
688 | * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value) | |
fc58fb18 | 689 | * @func_name: call function's name |
1da177e4 LT |
690 | * |
691 | * This routine is called by a protocol-specific driver (SCSI host, | |
d9489fb6 | 692 | * LAN, SCSI target) to register its reply callback routine. Each |
1da177e4 LT |
693 | * protocol-specific driver must do this before it will be able to |
694 | * use any IOC resources, such as obtaining request frames. | |
695 | * | |
696 | * NOTES: The SCSI protocol driver currently calls this routine thrice | |
697 | * in order to register separate callbacks; one for "normal" SCSI IO; | |
698 | * one for MptScsiTaskMgmt requests; one for Scan/DV requests. | |
699 | * | |
f606f571 PS |
700 | * Returns u8 valued "handle" in the range (and S.O.D. order) |
701 | * {N,...,7,6,5,...,1} if successful. | |
702 | * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be | |
703 | * considered an error by the caller. | |
1da177e4 | 704 | */ |
f606f571 | 705 | u8 |
213aaca3 | 706 | mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name) |
1da177e4 | 707 | { |
f606f571 PS |
708 | u8 cb_idx; |
709 | last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS; | |
1da177e4 LT |
710 | |
711 | /* | |
712 | * Search for empty callback slot in this order: {N,...,7,6,5,...,1} | |
713 | * (slot/handle 0 is reserved!) | |
714 | */ | |
f606f571 PS |
715 | for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
716 | if (MptCallbacks[cb_idx] == NULL) { | |
717 | MptCallbacks[cb_idx] = cbfunc; | |
718 | MptDriverClass[cb_idx] = dclass; | |
719 | MptEvHandlers[cb_idx] = NULL; | |
720 | last_drv_idx = cb_idx; | |
8af3d8d5 FW |
721 | strlcpy(MptCallbacksName[cb_idx], func_name, |
722 | MPT_MAX_CALLBACKNAME_LEN+1); | |
1da177e4 LT |
723 | break; |
724 | } | |
725 | } | |
726 | ||
727 | return last_drv_idx; | |
728 | } | |
729 | ||
730 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
731 | /** | |
732 | * mpt_deregister - Deregister a protocol drivers resources. | |
733 | * @cb_idx: previously registered callback handle | |
734 | * | |
d9489fb6 | 735 | * Each protocol-specific driver should call this routine when its |
1da177e4 LT |
736 | * module is unloaded. |
737 | */ | |
738 | void | |
f606f571 | 739 | mpt_deregister(u8 cb_idx) |
1da177e4 | 740 | { |
8d6d83e9 | 741 | if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) { |
1da177e4 LT |
742 | MptCallbacks[cb_idx] = NULL; |
743 | MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; | |
744 | MptEvHandlers[cb_idx] = NULL; | |
745 | ||
746 | last_drv_idx++; | |
747 | } | |
748 | } | |
749 | ||
750 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
751 | /** | |
7105a387 | 752 | * mpt_event_register - Register protocol-specific event callback handler. |
1da177e4 LT |
753 | * @cb_idx: previously registered (via mpt_register) callback handle |
754 | * @ev_cbfunc: callback function | |
755 | * | |
756 | * This routine can be called by one or more protocol-specific drivers | |
757 | * if/when they choose to be notified of MPT events. | |
758 | * | |
759 | * Returns 0 for success. | |
760 | */ | |
761 | int | |
f606f571 | 762 | mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc) |
1da177e4 | 763 | { |
8d6d83e9 | 764 | if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
1da177e4 LT |
765 | return -1; |
766 | ||
767 | MptEvHandlers[cb_idx] = ev_cbfunc; | |
768 | return 0; | |
769 | } | |
770 | ||
771 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
772 | /** | |
7105a387 | 773 | * mpt_event_deregister - Deregister protocol-specific event callback handler |
1da177e4 LT |
774 | * @cb_idx: previously registered callback handle |
775 | * | |
776 | * Each protocol-specific driver should call this routine | |
777 | * when it does not (or can no longer) handle events, | |
d9489fb6 | 778 | * or when its module is unloaded. |
1da177e4 LT |
779 | */ |
780 | void | |
f606f571 | 781 | mpt_event_deregister(u8 cb_idx) |
1da177e4 | 782 | { |
8d6d83e9 | 783 | if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
1da177e4 LT |
784 | return; |
785 | ||
786 | MptEvHandlers[cb_idx] = NULL; | |
787 | } | |
788 | ||
789 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
790 | /** | |
791 | * mpt_reset_register - Register protocol-specific IOC reset handler. | |
792 | * @cb_idx: previously registered (via mpt_register) callback handle | |
793 | * @reset_func: reset function | |
794 | * | |
795 | * This routine can be called by one or more protocol-specific drivers | |
796 | * if/when they choose to be notified of IOC resets. | |
797 | * | |
798 | * Returns 0 for success. | |
799 | */ | |
800 | int | |
f606f571 | 801 | mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func) |
1da177e4 | 802 | { |
f606f571 | 803 | if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
1da177e4 LT |
804 | return -1; |
805 | ||
806 | MptResetHandlers[cb_idx] = reset_func; | |
807 | return 0; | |
808 | } | |
809 | ||
810 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
811 | /** | |
812 | * mpt_reset_deregister - Deregister protocol-specific IOC reset handler. | |
813 | * @cb_idx: previously registered callback handle | |
814 | * | |
815 | * Each protocol-specific driver should call this routine | |
816 | * when it does not (or can no longer) handle IOC reset handling, | |
d9489fb6 | 817 | * or when its module is unloaded. |
1da177e4 LT |
818 | */ |
819 | void | |
f606f571 | 820 | mpt_reset_deregister(u8 cb_idx) |
1da177e4 | 821 | { |
f606f571 | 822 | if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
1da177e4 LT |
823 | return; |
824 | ||
825 | MptResetHandlers[cb_idx] = NULL; | |
826 | } | |
827 | ||
828 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
829 | /** | |
830 | * mpt_device_driver_register - Register device driver hooks | |
d9489fb6 RD |
831 | * @dd_cbfunc: driver callbacks struct |
832 | * @cb_idx: MPT protocol driver index | |
1da177e4 LT |
833 | */ |
834 | int | |
f606f571 | 835 | mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx) |
1da177e4 LT |
836 | { |
837 | MPT_ADAPTER *ioc; | |
d58b2725 | 838 | const struct pci_device_id *id; |
1da177e4 | 839 | |
8d6d83e9 | 840 | if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
7fadc87e | 841 | return -EINVAL; |
1da177e4 LT |
842 | |
843 | MptDeviceDriverHandlers[cb_idx] = dd_cbfunc; | |
844 | ||
845 | /* call per pci device probe entry point */ | |
846 | list_for_each_entry(ioc, &ioc_list, list) { | |
d58b2725 EM |
847 | id = ioc->pcidev->driver ? |
848 | ioc->pcidev->driver->id_table : NULL; | |
849 | if (dd_cbfunc->probe) | |
850 | dd_cbfunc->probe(ioc->pcidev, id); | |
1da177e4 LT |
851 | } |
852 | ||
7fadc87e | 853 | return 0; |
1da177e4 LT |
854 | } |
855 | ||
856 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
857 | /** | |
858 | * mpt_device_driver_deregister - DeRegister device driver hooks | |
d9489fb6 | 859 | * @cb_idx: MPT protocol driver index |
1da177e4 LT |
860 | */ |
861 | void | |
f606f571 | 862 | mpt_device_driver_deregister(u8 cb_idx) |
1da177e4 LT |
863 | { |
864 | struct mpt_pci_driver *dd_cbfunc; | |
865 | MPT_ADAPTER *ioc; | |
866 | ||
8d6d83e9 | 867 | if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) |
1da177e4 LT |
868 | return; |
869 | ||
870 | dd_cbfunc = MptDeviceDriverHandlers[cb_idx]; | |
871 | ||
872 | list_for_each_entry(ioc, &ioc_list, list) { | |
873 | if (dd_cbfunc->remove) | |
874 | dd_cbfunc->remove(ioc->pcidev); | |
875 | } | |
c6678e0c | 876 | |
1da177e4 LT |
877 | MptDeviceDriverHandlers[cb_idx] = NULL; |
878 | } | |
879 | ||
880 | ||
881 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
882 | /** | |
7105a387 | 883 | * mpt_get_msg_frame - Obtain an MPT request frame from the pool |
f606f571 | 884 | * @cb_idx: Handle of registered MPT protocol driver |
1da177e4 LT |
885 | * @ioc: Pointer to MPT adapter structure |
886 | * | |
7105a387 RD |
887 | * Obtain an MPT request frame from the pool (of 1024) that are |
888 | * allocated per MPT adapter. | |
889 | * | |
1da177e4 LT |
890 | * Returns pointer to a MPT request frame or %NULL if none are available |
891 | * or IOC is not active. | |
892 | */ | |
893 | MPT_FRAME_HDR* | |
f606f571 | 894 | mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc) |
1da177e4 LT |
895 | { |
896 | MPT_FRAME_HDR *mf; | |
897 | unsigned long flags; | |
898 | u16 req_idx; /* Request index */ | |
899 | ||
900 | /* validate handle and ioc identifier */ | |
901 | ||
902 | #ifdef MFCNT | |
903 | if (!ioc->active) | |
29dd3609 EM |
904 | printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame " |
905 | "returning NULL!\n", ioc->name); | |
1da177e4 LT |
906 | #endif |
907 | ||
908 | /* If interrupts are not attached, do not return a request frame */ | |
909 | if (!ioc->active) | |
910 | return NULL; | |
911 | ||
912 | spin_lock_irqsave(&ioc->FreeQlock, flags); | |
913 | if (!list_empty(&ioc->FreeQ)) { | |
914 | int req_offset; | |
915 | ||
916 | mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR, | |
917 | u.frame.linkage.list); | |
918 | list_del(&mf->u.frame.linkage.list); | |
82ffb671 | 919 | mf->u.frame.linkage.arg1 = 0; |
f606f571 | 920 | mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ |
1da177e4 LT |
921 | req_offset = (u8 *)mf - (u8 *)ioc->req_frames; |
922 | /* u16! */ | |
d335cc38 MED |
923 | req_idx = req_offset / ioc->req_sz; |
924 | mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); | |
1da177e4 | 925 | mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; |
29dd3609 EM |
926 | /* Default, will be changed if necessary in SG generation */ |
927 | ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame; | |
1da177e4 LT |
928 | #ifdef MFCNT |
929 | ioc->mfcnt++; | |
930 | #endif | |
931 | } | |
932 | else | |
933 | mf = NULL; | |
934 | spin_unlock_irqrestore(&ioc->FreeQlock, flags); | |
935 | ||
936 | #ifdef MFCNT | |
937 | if (mf == NULL) | |
29dd3609 EM |
938 | printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! " |
939 | "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt, | |
940 | ioc->req_depth); | |
1da177e4 LT |
941 | mfcounter++; |
942 | if (mfcounter == PRINT_MF_COUNT) | |
29dd3609 EM |
943 | printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name, |
944 | ioc->mfcnt, ioc->req_depth); | |
1da177e4 LT |
945 | #endif |
946 | ||
29dd3609 EM |
947 | dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n", |
948 | ioc->name, cb_idx, ioc->id, mf)); | |
1da177e4 LT |
949 | return mf; |
950 | } | |
951 | ||
952 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
953 | /** | |
7105a387 | 954 | * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC |
f606f571 | 955 | * @cb_idx: Handle of registered MPT protocol driver |
1da177e4 LT |
956 | * @ioc: Pointer to MPT adapter structure |
957 | * @mf: Pointer to MPT request frame | |
958 | * | |
7105a387 | 959 | * This routine posts an MPT request frame to the request post FIFO of a |
1da177e4 LT |
960 | * specific MPT adapter. |
961 | */ | |
962 | void | |
f606f571 | 963 | mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) |
1da177e4 LT |
964 | { |
965 | u32 mf_dma_addr; | |
966 | int req_offset; | |
967 | u16 req_idx; /* Request index */ | |
968 | ||
969 | /* ensure values are reset properly! */ | |
f606f571 | 970 | mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ |
1da177e4 LT |
971 | req_offset = (u8 *)mf - (u8 *)ioc->req_frames; |
972 | /* u16! */ | |
d335cc38 MED |
973 | req_idx = req_offset / ioc->req_sz; |
974 | mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); | |
1da177e4 LT |
975 | mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; |
976 | ||
436ace72 | 977 | DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); |
1da177e4 | 978 | |
c6678e0c | 979 | mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx]; |
29dd3609 EM |
980 | dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d " |
981 | "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, | |
982 | ioc->RequestNB[req_idx])); | |
1da177e4 LT |
983 | CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr); |
984 | } | |
985 | ||
7a195f46 | 986 | /** |
7105a387 | 987 | * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame |
f606f571 | 988 | * @cb_idx: Handle of registered MPT protocol driver |
7a195f46 PS |
989 | * @ioc: Pointer to MPT adapter structure |
990 | * @mf: Pointer to MPT request frame | |
991 | * | |
7105a387 RD |
992 | * Send a protocol-specific MPT request frame to an IOC using |
993 | * hi-priority request queue. | |
994 | * | |
995 | * This routine posts an MPT request frame to the request post FIFO of a | |
7a195f46 PS |
996 | * specific MPT adapter. |
997 | **/ | |
998 | void | |
f606f571 | 999 | mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) |
7a195f46 PS |
1000 | { |
1001 | u32 mf_dma_addr; | |
1002 | int req_offset; | |
1003 | u16 req_idx; /* Request index */ | |
1004 | ||
1005 | /* ensure values are reset properly! */ | |
f606f571 | 1006 | mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; |
7a195f46 PS |
1007 | req_offset = (u8 *)mf - (u8 *)ioc->req_frames; |
1008 | req_idx = req_offset / ioc->req_sz; | |
1009 | mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); | |
1010 | mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; | |
1011 | ||
1012 | DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); | |
1013 | ||
1014 | mf_dma_addr = (ioc->req_frames_low_dma + req_offset); | |
1015 | dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n", | |
1016 | ioc->name, mf_dma_addr, req_idx)); | |
1017 | CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr); | |
1018 | } | |
1019 | ||
1da177e4 LT |
1020 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
1021 | /** | |
1022 | * mpt_free_msg_frame - Place MPT request frame back on FreeQ. | |
1da177e4 LT |
1023 | * @ioc: Pointer to MPT adapter structure |
1024 | * @mf: Pointer to MPT request frame | |
1025 | * | |
1026 | * This routine places a MPT request frame back on the MPT adapter's | |
1027 | * FreeQ. | |
1028 | */ | |
1029 | void | |
1030 | mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) | |
1031 | { | |
1032 | unsigned long flags; | |
1033 | ||
1034 | /* Put Request back on FreeQ! */ | |
1035 | spin_lock_irqsave(&ioc->FreeQlock, flags); | |
2f187862 KD |
1036 | if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf) |
1037 | goto out; | |
1038 | /* signature to know if this mf is freed */ | |
1039 | mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf); | |
1da177e4 LT |
1040 | list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); |
1041 | #ifdef MFCNT | |
1042 | ioc->mfcnt--; | |
1043 | #endif | |
2f187862 | 1044 | out: |
1da177e4 LT |
1045 | spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
1046 | } | |
1047 | ||
1048 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1049 | /** | |
14d0f0b0 | 1050 | * mpt_add_sge - Place a simple 32 bit SGE at address pAddr. |
1da177e4 LT |
1051 | * @pAddr: virtual address for SGE |
1052 | * @flagslength: SGE flags and data transfer length | |
1053 | * @dma_addr: Physical address | |
1054 | * | |
1055 | * This routine places a MPT request frame back on the MPT adapter's | |
1056 | * FreeQ. | |
1057 | */ | |
14d0f0b0 KD |
1058 | static void |
1059 | mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr) | |
1da177e4 | 1060 | { |
14d0f0b0 KD |
1061 | SGESimple32_t *pSge = (SGESimple32_t *) pAddr; |
1062 | pSge->FlagsLength = cpu_to_le32(flagslength); | |
1063 | pSge->Address = cpu_to_le32(dma_addr); | |
1064 | } | |
1065 | ||
1066 | /** | |
1067 | * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr. | |
1068 | * @pAddr: virtual address for SGE | |
1069 | * @flagslength: SGE flags and data transfer length | |
1070 | * @dma_addr: Physical address | |
1071 | * | |
1072 | * This routine places a MPT request frame back on the MPT adapter's | |
1073 | * FreeQ. | |
1074 | **/ | |
1075 | static void | |
1076 | mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr) | |
1077 | { | |
1078 | SGESimple64_t *pSge = (SGESimple64_t *) pAddr; | |
1079 | pSge->Address.Low = cpu_to_le32 | |
c55b89fb | 1080 | (lower_32_bits(dma_addr)); |
14d0f0b0 | 1081 | pSge->Address.High = cpu_to_le32 |
c55b89fb | 1082 | (upper_32_bits(dma_addr)); |
14d0f0b0 KD |
1083 | pSge->FlagsLength = cpu_to_le32 |
1084 | ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); | |
1085 | } | |
1086 | ||
1087 | /** | |
9cf46a35 | 1088 | * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround). |
14d0f0b0 KD |
1089 | * @pAddr: virtual address for SGE |
1090 | * @flagslength: SGE flags and data transfer length | |
1091 | * @dma_addr: Physical address | |
1092 | * | |
1093 | * This routine places a MPT request frame back on the MPT adapter's | |
1094 | * FreeQ. | |
1095 | **/ | |
1096 | static void | |
1097 | mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr) | |
1098 | { | |
1099 | SGESimple64_t *pSge = (SGESimple64_t *) pAddr; | |
1100 | u32 tmp; | |
1101 | ||
1102 | pSge->Address.Low = cpu_to_le32 | |
c55b89fb KD |
1103 | (lower_32_bits(dma_addr)); |
1104 | tmp = (u32)(upper_32_bits(dma_addr)); | |
14d0f0b0 KD |
1105 | |
1106 | /* | |
1107 | * 1078 errata workaround for the 36GB limitation | |
1108 | */ | |
1109 | if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) { | |
1110 | flagslength |= | |
1111 | MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS); | |
1112 | tmp |= (1<<31); | |
1113 | if (mpt_debug_level & MPT_DEBUG_36GB_MEM) | |
1114 | printk(KERN_DEBUG "1078 P0M2 addressing for " | |
1115 | "addr = 0x%llx len = %d\n", | |
1116 | (unsigned long long)dma_addr, | |
1117 | MPI_SGE_LENGTH(flagslength)); | |
1118 | } | |
1119 | ||
1120 | pSge->Address.High = cpu_to_le32(tmp); | |
1121 | pSge->FlagsLength = cpu_to_le32( | |
1122 | (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); | |
1123 | } | |
1124 | ||
1125 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1126 | /** | |
1127 | * mpt_add_chain - Place a 32 bit chain SGE at address pAddr. | |
1128 | * @pAddr: virtual address for SGE | |
1129 | * @next: nextChainOffset value (u32's) | |
1130 | * @length: length of next SGL segment | |
1131 | * @dma_addr: Physical address | |
1132 | * | |
1133 | */ | |
1134 | static void | |
1135 | mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) | |
1136 | { | |
1137 | SGEChain32_t *pChain = (SGEChain32_t *) pAddr; | |
1138 | pChain->Length = cpu_to_le16(length); | |
1139 | pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT; | |
1140 | pChain->NextChainOffset = next; | |
1141 | pChain->Address = cpu_to_le32(dma_addr); | |
1142 | } | |
1143 | ||
1144 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1145 | /** | |
1146 | * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr. | |
1147 | * @pAddr: virtual address for SGE | |
1148 | * @next: nextChainOffset value (u32's) | |
1149 | * @length: length of next SGL segment | |
1150 | * @dma_addr: Physical address | |
1151 | * | |
1152 | */ | |
1153 | static void | |
1154 | mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) | |
1155 | { | |
1156 | SGEChain64_t *pChain = (SGEChain64_t *) pAddr; | |
1da177e4 LT |
1157 | u32 tmp = dma_addr & 0xFFFFFFFF; |
1158 | ||
14d0f0b0 KD |
1159 | pChain->Length = cpu_to_le16(length); |
1160 | pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT | | |
1161 | MPI_SGE_FLAGS_64_BIT_ADDRESSING); | |
1da177e4 | 1162 | |
14d0f0b0 KD |
1163 | pChain->NextChainOffset = next; |
1164 | ||
1165 | pChain->Address.Low = cpu_to_le32(tmp); | |
c55b89fb | 1166 | tmp = (u32)(upper_32_bits(dma_addr)); |
14d0f0b0 | 1167 | pChain->Address.High = cpu_to_le32(tmp); |
1da177e4 LT |
1168 | } |
1169 | ||
1170 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1171 | /** | |
d9489fb6 | 1172 | * mpt_send_handshake_request - Send MPT request via doorbell handshake method. |
f606f571 | 1173 | * @cb_idx: Handle of registered MPT protocol driver |
1da177e4 LT |
1174 | * @ioc: Pointer to MPT adapter structure |
1175 | * @reqBytes: Size of the request in bytes | |
1176 | * @req: Pointer to MPT request frame | |
1177 | * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. | |
1178 | * | |
1179 | * This routine is used exclusively to send MptScsiTaskMgmt | |
1180 | * requests since they are required to be sent via doorbell handshake. | |
1181 | * | |
1182 | * NOTE: It is the callers responsibility to byte-swap fields in the | |
1183 | * request which are greater than 1 byte in size. | |
1184 | * | |
1185 | * Returns 0 for success, non-zero for failure. | |
1186 | */ | |
1187 | int | |
f606f571 | 1188 | mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag) |
1da177e4 | 1189 | { |
cd2c6191 | 1190 | int r = 0; |
1da177e4 LT |
1191 | u8 *req_as_bytes; |
1192 | int ii; | |
1193 | ||
1194 | /* State is known to be good upon entering | |
1195 | * this function so issue the bus reset | |
1196 | * request. | |
1197 | */ | |
1198 | ||
1199 | /* | |
1200 | * Emulate what mpt_put_msg_frame() does /wrt to sanity | |
1201 | * setting cb_idx/req_idx. But ONLY if this request | |
1202 | * is in proper (pre-alloc'd) request buffer range... | |
1203 | */ | |
1204 | ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req); | |
1205 | if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) { | |
1206 | MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req; | |
1207 | mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii); | |
f606f571 | 1208 | mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; |
1da177e4 LT |
1209 | } |
1210 | ||
1211 | /* Make sure there are no doorbells */ | |
1212 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
c6678e0c | 1213 | |
1da177e4 LT |
1214 | CHIPREG_WRITE32(&ioc->chip->Doorbell, |
1215 | ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | | |
1216 | ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); | |
1217 | ||
1218 | /* Wait for IOC doorbell int */ | |
1219 | if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) { | |
1220 | return ii; | |
1221 | } | |
1222 | ||
1223 | /* Read doorbell and check for active bit */ | |
1224 | if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) | |
1225 | return -5; | |
1226 | ||
29dd3609 | 1227 | dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n", |
c6678e0c | 1228 | ioc->name, ii)); |
1da177e4 LT |
1229 | |
1230 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
1231 | ||
1232 | if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { | |
1233 | return -2; | |
1234 | } | |
c6678e0c | 1235 | |
1da177e4 LT |
1236 | /* Send request via doorbell handshake */ |
1237 | req_as_bytes = (u8 *) req; | |
1238 | for (ii = 0; ii < reqBytes/4; ii++) { | |
1239 | u32 word; | |
1240 | ||
1241 | word = ((req_as_bytes[(ii*4) + 0] << 0) | | |
1242 | (req_as_bytes[(ii*4) + 1] << 8) | | |
1243 | (req_as_bytes[(ii*4) + 2] << 16) | | |
1244 | (req_as_bytes[(ii*4) + 3] << 24)); | |
1245 | CHIPREG_WRITE32(&ioc->chip->Doorbell, word); | |
1246 | if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { | |
1247 | r = -3; | |
1248 | break; | |
1249 | } | |
1250 | } | |
1251 | ||
1252 | if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0) | |
1253 | r = 0; | |
1254 | else | |
1255 | r = -4; | |
1256 | ||
1257 | /* Make sure there are no doorbells */ | |
1258 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
82ffb671 | 1259 | |
1da177e4 LT |
1260 | return r; |
1261 | } | |
1262 | ||
82ffb671 CH |
1263 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
1264 | /** | |
d9489fb6 | 1265 | * mpt_host_page_access_control - control the IOC's Host Page Buffer access |
82ffb671 CH |
1266 | * @ioc: Pointer to MPT adapter structure |
1267 | * @access_control_value: define bits below | |
d9489fb6 RD |
1268 | * @sleepFlag: Specifies whether the process can sleep |
1269 | * | |
1270 | * Provides mechanism for the host driver to control the IOC's | |
1271 | * Host Page Buffer access. | |
82ffb671 CH |
1272 | * |
1273 | * Access Control Value - bits[15:12] | |
1274 | * 0h Reserved | |
1275 | * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS } | |
1276 | * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS } | |
1277 | * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER } | |
1278 | * | |
1279 | * Returns 0 for success, non-zero for failure. | |
1280 | */ | |
1281 | ||
1282 | static int | |
1283 | mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag) | |
1284 | { | |
1285 | int r = 0; | |
1286 | ||
1287 | /* return if in use */ | |
1288 | if (CHIPREG_READ32(&ioc->chip->Doorbell) | |
1289 | & MPI_DOORBELL_ACTIVE) | |
1290 | return -1; | |
1291 | ||
1292 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
1293 | ||
1294 | CHIPREG_WRITE32(&ioc->chip->Doorbell, | |
1295 | ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL | |
1296 | <<MPI_DOORBELL_FUNCTION_SHIFT) | | |
1297 | (access_control_value<<12))); | |
1298 | ||
1299 | /* Wait for IOC to clear Doorbell Status bit */ | |
1300 | if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { | |
1301 | return -2; | |
1302 | }else | |
1303 | return 0; | |
1304 | } | |
1305 | ||
1306 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1307 | /** | |
1308 | * mpt_host_page_alloc - allocate system memory for the fw | |
d9489fb6 RD |
1309 | * @ioc: Pointer to pointer to IOC adapter |
1310 | * @ioc_init: Pointer to ioc init config page | |
82ffb671 | 1311 | * |
d9489fb6 | 1312 | * If we already allocated memory in past, then resend the same pointer. |
82ffb671 CH |
1313 | * Returns 0 for success, non-zero for failure. |
1314 | */ | |
1315 | static int | |
1316 | mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init) | |
1317 | { | |
1318 | char *psge; | |
1319 | int flags_length; | |
1320 | u32 host_page_buffer_sz=0; | |
1321 | ||
1322 | if(!ioc->HostPageBuffer) { | |
1323 | ||
1324 | host_page_buffer_sz = | |
1325 | le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF; | |
1326 | ||
1327 | if(!host_page_buffer_sz) | |
1328 | return 0; /* fw doesn't need any host buffers */ | |
1329 | ||
1330 | /* spin till we get enough memory */ | |
1331 | while(host_page_buffer_sz > 0) { | |
1332 | ||
1333 | if((ioc->HostPageBuffer = pci_alloc_consistent( | |
1334 | ioc->pcidev, | |
1335 | host_page_buffer_sz, | |
1336 | &ioc->HostPageBuffer_dma)) != NULL) { | |
1337 | ||
436ace72 | 1338 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
82ffb671 | 1339 | "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n", |
ba856d32 EM |
1340 | ioc->name, ioc->HostPageBuffer, |
1341 | (u32)ioc->HostPageBuffer_dma, | |
466544d8 | 1342 | host_page_buffer_sz)); |
82ffb671 CH |
1343 | ioc->alloc_total += host_page_buffer_sz; |
1344 | ioc->HostPageBuffer_sz = host_page_buffer_sz; | |
1345 | break; | |
1346 | } | |
1347 | ||
1348 | host_page_buffer_sz -= (4*1024); | |
1349 | } | |
1350 | } | |
1351 | ||
1352 | if(!ioc->HostPageBuffer) { | |
1353 | printk(MYIOC_s_ERR_FMT | |
1354 | "Failed to alloc memory for host_page_buffer!\n", | |
1355 | ioc->name); | |
1356 | return -999; | |
1357 | } | |
1358 | ||
1359 | psge = (char *)&ioc_init->HostPageBufferSGE; | |
1360 | flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT | | |
1361 | MPI_SGE_FLAGS_SYSTEM_ADDRESS | | |
82ffb671 CH |
1362 | MPI_SGE_FLAGS_HOST_TO_IOC | |
1363 | MPI_SGE_FLAGS_END_OF_BUFFER; | |
82ffb671 CH |
1364 | flags_length = flags_length << MPI_SGE_FLAGS_SHIFT; |
1365 | flags_length |= ioc->HostPageBuffer_sz; | |
14d0f0b0 | 1366 | ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma); |
82ffb671 CH |
1367 | ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE; |
1368 | ||
1369 | return 0; | |
1370 | } | |
1371 | ||
1da177e4 LT |
1372 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
1373 | /** | |
d9489fb6 | 1374 | * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure. |
1da177e4 LT |
1375 | * @iocid: IOC unique identifier (integer) |
1376 | * @iocpp: Pointer to pointer to IOC adapter | |
1377 | * | |
d9489fb6 RD |
1378 | * Given a unique IOC identifier, set pointer to the associated MPT |
1379 | * adapter structure. | |
1380 | * | |
1381 | * Returns iocid and sets iocpp if iocid is found. | |
1382 | * Returns -1 if iocid is not found. | |
1da177e4 LT |
1383 | */ |
1384 | int | |
1385 | mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) | |
1386 | { | |
1387 | MPT_ADAPTER *ioc; | |
1388 | ||
1389 | list_for_each_entry(ioc,&ioc_list,list) { | |
1390 | if (ioc->id == iocid) { | |
1391 | *iocpp =ioc; | |
1392 | return iocid; | |
c6678e0c | 1393 | } |
1da177e4 | 1394 | } |
c6678e0c | 1395 | |
1da177e4 LT |
1396 | *iocpp = NULL; |
1397 | return -1; | |
1398 | } | |
1399 | ||
ef1d8df7 PS |
1400 | /** |
1401 | * mpt_get_product_name - returns product string | |
1402 | * @vendor: pci vendor id | |
1403 | * @device: pci device id | |
1404 | * @revision: pci revision id | |
1405 | * @prod_name: string returned | |
1406 | * | |
1407 | * Returns product string displayed when driver loads, | |
1408 | * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product | |
1409 | * | |
1410 | **/ | |
1411 | static void | |
1412 | mpt_get_product_name(u16 vendor, u16 device, u8 revision, char *prod_name) | |
1413 | { | |
1414 | char *product_str = NULL; | |
1415 | ||
1416 | if (vendor == PCI_VENDOR_ID_BROCADE) { | |
1417 | switch (device) | |
1418 | { | |
1419 | case MPI_MANUFACTPAGE_DEVICEID_FC949E: | |
1420 | switch (revision) | |
1421 | { | |
1422 | case 0x00: | |
1423 | product_str = "BRE040 A0"; | |
1424 | break; | |
1425 | case 0x01: | |
1426 | product_str = "BRE040 A1"; | |
1427 | break; | |
1428 | default: | |
1429 | product_str = "BRE040"; | |
1430 | break; | |
1431 | } | |
1432 | break; | |
1433 | } | |
1434 | goto out; | |
1435 | } | |
1436 | ||
1437 | switch (device) | |
1438 | { | |
1439 | case MPI_MANUFACTPAGE_DEVICEID_FC909: | |
1440 | product_str = "LSIFC909 B1"; | |
1441 | break; | |
1442 | case MPI_MANUFACTPAGE_DEVICEID_FC919: | |
1443 | product_str = "LSIFC919 B0"; | |
1444 | break; | |
1445 | case MPI_MANUFACTPAGE_DEVICEID_FC929: | |
1446 | product_str = "LSIFC929 B0"; | |
1447 | break; | |
1448 | case MPI_MANUFACTPAGE_DEVICEID_FC919X: | |
1449 | if (revision < 0x80) | |
1450 | product_str = "LSIFC919X A0"; | |
1451 | else | |
1452 | product_str = "LSIFC919XL A1"; | |
1453 | break; | |
1454 | case MPI_MANUFACTPAGE_DEVICEID_FC929X: | |
1455 | if (revision < 0x80) | |
1456 | product_str = "LSIFC929X A0"; | |
1457 | else | |
1458 | product_str = "LSIFC929XL A1"; | |
1459 | break; | |
1460 | case MPI_MANUFACTPAGE_DEVICEID_FC939X: | |
1461 | product_str = "LSIFC939X A1"; | |
1462 | break; | |
1463 | case MPI_MANUFACTPAGE_DEVICEID_FC949X: | |
1464 | product_str = "LSIFC949X A1"; | |
1465 | break; | |
1466 | case MPI_MANUFACTPAGE_DEVICEID_FC949E: | |
1467 | switch (revision) | |
1468 | { | |
1469 | case 0x00: | |
1470 | product_str = "LSIFC949E A0"; | |
1471 | break; | |
1472 | case 0x01: | |
1473 | product_str = "LSIFC949E A1"; | |
1474 | break; | |
1475 | default: | |
1476 | product_str = "LSIFC949E"; | |
1477 | break; | |
1478 | } | |
1479 | break; | |
1480 | case MPI_MANUFACTPAGE_DEVID_53C1030: | |
1481 | switch (revision) | |
1482 | { | |
1483 | case 0x00: | |
1484 | product_str = "LSI53C1030 A0"; | |
1485 | break; | |
1486 | case 0x01: | |
1487 | product_str = "LSI53C1030 B0"; | |
1488 | break; | |
1489 | case 0x03: | |
1490 | product_str = "LSI53C1030 B1"; | |
1491 | break; | |
1492 | case 0x07: | |
1493 | product_str = "LSI53C1030 B2"; | |
1494 | break; | |
1495 | case 0x08: | |
1496 | product_str = "LSI53C1030 C0"; | |
1497 | break; | |
1498 | case 0x80: | |
1499 | product_str = "LSI53C1030T A0"; | |
1500 | break; | |
1501 | case 0x83: | |
1502 | product_str = "LSI53C1030T A2"; | |
1503 | break; | |
1504 | case 0x87: | |
1505 | product_str = "LSI53C1030T A3"; | |
1506 | break; | |
1507 | case 0xc1: | |
1508 | product_str = "LSI53C1020A A1"; | |
1509 | break; | |
1510 | default: | |
1511 | product_str = "LSI53C1030"; | |
1512 | break; | |
1513 | } | |
1514 | break; | |
1515 | case MPI_MANUFACTPAGE_DEVID_1030_53C1035: | |
1516 | switch (revision) | |
1517 | { | |
1518 | case 0x03: | |
1519 | product_str = "LSI53C1035 A2"; | |
1520 | break; | |
1521 | case 0x04: | |
1522 | product_str = "LSI53C1035 B0"; | |
1523 | break; | |
1524 | default: | |
1525 | product_str = "LSI53C1035"; | |
1526 | break; | |
1527 | } | |
1528 | break; | |
1529 | case MPI_MANUFACTPAGE_DEVID_SAS1064: | |
1530 | switch (revision) | |
1531 | { | |
1532 | case 0x00: | |
1533 | product_str = "LSISAS1064 A1"; | |
1534 | break; | |
1535 | case 0x01: | |
1536 | product_str = "LSISAS1064 A2"; | |
1537 | break; | |
1538 | case 0x02: | |
1539 | product_str = "LSISAS1064 A3"; | |
1540 | break; | |
1541 | case 0x03: | |
1542 | product_str = "LSISAS1064 A4"; | |
1543 | break; | |
1544 | default: | |
1545 | product_str = "LSISAS1064"; | |
1546 | break; | |
1547 | } | |
1548 | break; | |
1549 | case MPI_MANUFACTPAGE_DEVID_SAS1064E: | |
1550 | switch (revision) | |
1551 | { | |
1552 | case 0x00: | |
1553 | product_str = "LSISAS1064E A0"; | |
1554 | break; | |
1555 | case 0x01: | |
1556 | product_str = "LSISAS1064E B0"; | |
1557 | break; | |
1558 | case 0x02: | |
1559 | product_str = "LSISAS1064E B1"; | |
1560 | break; | |
1561 | case 0x04: | |
1562 | product_str = "LSISAS1064E B2"; | |
1563 | break; | |
1564 | case 0x08: | |
1565 | product_str = "LSISAS1064E B3"; | |
1566 | break; | |
1567 | default: | |
1568 | product_str = "LSISAS1064E"; | |
1569 | break; | |
1570 | } | |
1571 | break; | |
1572 | case MPI_MANUFACTPAGE_DEVID_SAS1068: | |
1573 | switch (revision) | |
1574 | { | |
1575 | case 0x00: | |
1576 | product_str = "LSISAS1068 A0"; | |
1577 | break; | |
1578 | case 0x01: | |
1579 | product_str = "LSISAS1068 B0"; | |
1580 | break; | |
1581 | case 0x02: | |
1582 | product_str = "LSISAS1068 B1"; | |
1583 | break; | |
1584 | default: | |
1585 | product_str = "LSISAS1068"; | |
1586 | break; | |
1587 | } | |
1588 | break; | |
1589 | case MPI_MANUFACTPAGE_DEVID_SAS1068E: | |
1590 | switch (revision) | |
1591 | { | |
1592 | case 0x00: | |
1593 | product_str = "LSISAS1068E A0"; | |
1594 | break; | |
1595 | case 0x01: | |
1596 | product_str = "LSISAS1068E B0"; | |
1597 | break; | |
1598 | case 0x02: | |
1599 | product_str = "LSISAS1068E B1"; | |
1600 | break; | |
1601 | case 0x04: | |
1602 | product_str = "LSISAS1068E B2"; | |
1603 | break; | |
1604 | case 0x08: | |
1605 | product_str = "LSISAS1068E B3"; | |
1606 | break; | |
1607 | default: | |
1608 | product_str = "LSISAS1068E"; | |
1609 | break; | |
1610 | } | |
1611 | break; | |
1612 | case MPI_MANUFACTPAGE_DEVID_SAS1078: | |
1613 | switch (revision) | |
1614 | { | |
1615 | case 0x00: | |
1616 | product_str = "LSISAS1078 A0"; | |
1617 | break; | |
1618 | case 0x01: | |
1619 | product_str = "LSISAS1078 B0"; | |
1620 | break; | |
1621 | case 0x02: | |
1622 | product_str = "LSISAS1078 C0"; | |
1623 | break; | |
1624 | case 0x03: | |
1625 | product_str = "LSISAS1078 C1"; | |
1626 | break; | |
1627 | case 0x04: | |
1628 | product_str = "LSISAS1078 C2"; | |
1629 | break; | |
1630 | default: | |
1631 | product_str = "LSISAS1078"; | |
1632 | break; | |
1633 | } | |
1634 | break; | |
1635 | } | |
1636 | ||
1637 | out: | |
1638 | if (product_str) | |
1639 | sprintf(prod_name, "%s", product_str); | |
1640 | } | |
1641 | ||
4d4109d0 PS |
1642 | /** |
1643 | * mpt_mapresources - map in memory mapped io | |
1644 | * @ioc: Pointer to pointer to IOC adapter | |
1645 | * | |
1646 | **/ | |
1647 | static int | |
1648 | mpt_mapresources(MPT_ADAPTER *ioc) | |
1649 | { | |
1650 | u8 __iomem *mem; | |
1651 | int ii; | |
e46b63b3 | 1652 | resource_size_t mem_phys; |
4d4109d0 PS |
1653 | unsigned long port; |
1654 | u32 msize; | |
1655 | u32 psize; | |
4d4109d0 PS |
1656 | int r = -ENODEV; |
1657 | struct pci_dev *pdev; | |
1658 | ||
1659 | pdev = ioc->pcidev; | |
1660 | ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); | |
1661 | if (pci_enable_device_mem(pdev)) { | |
1662 | printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() " | |
1663 | "failed\n", ioc->name); | |
1664 | return r; | |
1665 | } | |
1666 | if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) { | |
1667 | printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with " | |
1668 | "MEM failed\n", ioc->name); | |
20953a62 | 1669 | goto out_pci_disable_device; |
4d4109d0 PS |
1670 | } |
1671 | ||
14d0f0b0 KD |
1672 | if (sizeof(dma_addr_t) > 4) { |
1673 | const uint64_t required_mask = dma_get_required_mask | |
1674 | (&pdev->dev); | |
1675 | if (required_mask > DMA_BIT_MASK(32) | |
1676 | && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) | |
1677 | && !pci_set_consistent_dma_mask(pdev, | |
1678 | DMA_BIT_MASK(64))) { | |
1679 | ioc->dma_mask = DMA_BIT_MASK(64); | |
1680 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT | |
1681 | ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", | |
1682 | ioc->name)); | |
1683 | } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) | |
1684 | && !pci_set_consistent_dma_mask(pdev, | |
1685 | DMA_BIT_MASK(32))) { | |
1686 | ioc->dma_mask = DMA_BIT_MASK(32); | |
1687 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT | |
1688 | ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", | |
1689 | ioc->name)); | |
1690 | } else { | |
1691 | printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", | |
1692 | ioc->name, pci_name(pdev)); | |
20953a62 | 1693 | goto out_pci_release_region; |
14d0f0b0 | 1694 | } |
4d4109d0 | 1695 | } else { |
14d0f0b0 KD |
1696 | if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) |
1697 | && !pci_set_consistent_dma_mask(pdev, | |
1698 | DMA_BIT_MASK(32))) { | |
1699 | ioc->dma_mask = DMA_BIT_MASK(32); | |
1700 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT | |
1701 | ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", | |
1702 | ioc->name)); | |
1703 | } else { | |
1704 | printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", | |
1705 | ioc->name, pci_name(pdev)); | |
20953a62 | 1706 | goto out_pci_release_region; |
14d0f0b0 | 1707 | } |
4d4109d0 PS |
1708 | } |
1709 | ||
1710 | mem_phys = msize = 0; | |
1711 | port = psize = 0; | |
1712 | for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) { | |
1713 | if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) { | |
1714 | if (psize) | |
1715 | continue; | |
1716 | /* Get I/O space! */ | |
1717 | port = pci_resource_start(pdev, ii); | |
1718 | psize = pci_resource_len(pdev, ii); | |
1719 | } else { | |
1720 | if (msize) | |
1721 | continue; | |
1722 | /* Get memmap */ | |
1723 | mem_phys = pci_resource_start(pdev, ii); | |
1724 | msize = pci_resource_len(pdev, ii); | |
1725 | } | |
1726 | } | |
1727 | ioc->mem_size = msize; | |
1728 | ||
1729 | mem = NULL; | |
1730 | /* Get logical ptr for PciMem0 space */ | |
1731 | /*mem = ioremap(mem_phys, msize);*/ | |
1732 | mem = ioremap(mem_phys, msize); | |
1733 | if (mem == NULL) { | |
1734 | printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter" | |
1735 | " memory!\n", ioc->name); | |
20953a62 HG |
1736 | r = -EINVAL; |
1737 | goto out_pci_release_region; | |
4d4109d0 PS |
1738 | } |
1739 | ioc->memmap = mem; | |
e46b63b3 PB |
1740 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n", |
1741 | ioc->name, mem, (unsigned long long)mem_phys)); | |
4d4109d0 PS |
1742 | |
1743 | ioc->mem_phys = mem_phys; | |
1744 | ioc->chip = (SYSIF_REGS __iomem *)mem; | |
1745 | ||
1746 | /* Save Port IO values in case we need to do downloadboot */ | |
1747 | ioc->pio_mem_phys = port; | |
1748 | ioc->pio_chip = (SYSIF_REGS __iomem *)port; | |
1749 | ||
1750 | return 0; | |
20953a62 HG |
1751 | |
1752 | out_pci_release_region: | |
1753 | pci_release_selected_regions(pdev, ioc->bars); | |
1754 | out_pci_disable_device: | |
1755 | pci_disable_device(pdev); | |
1756 | return r; | |
4d4109d0 PS |
1757 | } |
1758 | ||
1da177e4 | 1759 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
d9489fb6 | 1760 | /** |
7fadc87e | 1761 | * mpt_attach - Install a PCI intelligent MPT adapter. |
1da177e4 | 1762 | * @pdev: Pointer to pci_dev structure |
d9489fb6 | 1763 | * @id: PCI device ID information |
1da177e4 LT |
1764 | * |
1765 | * This routine performs all the steps necessary to bring the IOC of | |
1766 | * a MPT adapter to a OPERATIONAL state. This includes registering | |
1767 | * memory regions, registering the interrupt, and allocating request | |
1768 | * and reply memory pools. | |
1769 | * | |
1770 | * This routine also pre-fetches the LAN MAC address of a Fibre Channel | |
1771 | * MPT adapter. | |
1772 | * | |
1773 | * Returns 0 for success, non-zero for failure. | |
1774 | * | |
1775 | * TODO: Add support for polled controllers | |
1776 | */ | |
7fadc87e MED |
1777 | int |
1778 | mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) | |
1da177e4 LT |
1779 | { |
1780 | MPT_ADAPTER *ioc; | |
f606f571 | 1781 | u8 cb_idx; |
1da177e4 | 1782 | int r = -ENODEV; |
1da177e4 LT |
1783 | u8 pcixcmd; |
1784 | static int mpt_ids = 0; | |
1785 | #ifdef CONFIG_PROC_FS | |
eb6edad3 | 1786 | struct proc_dir_entry *dent; |
1da177e4 LT |
1787 | #endif |
1788 | ||
436ace72 PS |
1789 | ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC); |
1790 | if (ioc == NULL) { | |
1791 | printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); | |
1792 | return -ENOMEM; | |
1793 | } | |
4d4109d0 | 1794 | |
29dd3609 EM |
1795 | ioc->id = mpt_ids++; |
1796 | sprintf(ioc->name, "ioc%d", ioc->id); | |
2f187862 | 1797 | dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n")); |
c6678e0c | 1798 | |
4d4109d0 PS |
1799 | /* |
1800 | * set initial debug level | |
1801 | * (refer to mptdebug.h) | |
1802 | * | |
1803 | */ | |
1804 | ioc->debug_level = mpt_debug_level; | |
1805 | if (mpt_debug_level) | |
1806 | printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level); | |
e78d5b8f | 1807 | |
29dd3609 | 1808 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name)); |
c6678e0c | 1809 | |
4d4109d0 PS |
1810 | ioc->pcidev = pdev; |
1811 | if (mpt_mapresources(ioc)) { | |
56876195 | 1812 | kfree(ioc); |
1da177e4 LT |
1813 | return r; |
1814 | } | |
1815 | ||
14d0f0b0 KD |
1816 | /* |
1817 | * Setting up proper handlers for scatter gather handling | |
1818 | */ | |
1819 | if (ioc->dma_mask == DMA_BIT_MASK(64)) { | |
1820 | if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) | |
1821 | ioc->add_sge = &mpt_add_sge_64bit_1078; | |
1822 | else | |
1823 | ioc->add_sge = &mpt_add_sge_64bit; | |
1824 | ioc->add_chain = &mpt_add_chain_64bit; | |
1825 | ioc->sg_addr_size = 8; | |
1826 | } else { | |
1827 | ioc->add_sge = &mpt_add_sge; | |
1828 | ioc->add_chain = &mpt_add_chain; | |
1829 | ioc->sg_addr_size = 4; | |
1830 | } | |
1831 | ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; | |
1832 | ||
1da177e4 LT |
1833 | ioc->alloc_total = sizeof(MPT_ADAPTER); |
1834 | ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */ | |
1835 | ioc->reply_sz = MPT_REPLY_FRAME_SIZE; | |
c6678e0c | 1836 | |
1da177e4 | 1837 | |
1ba9ab2e | 1838 | spin_lock_init(&ioc->taskmgmt_lock); |
37c60f37 KD |
1839 | mutex_init(&ioc->internal_cmds.mutex); |
1840 | init_completion(&ioc->internal_cmds.done); | |
f0f09d3b KD |
1841 | mutex_init(&ioc->mptbase_cmds.mutex); |
1842 | init_completion(&ioc->mptbase_cmds.done); | |
1ba9ab2e KD |
1843 | mutex_init(&ioc->taskmgmt_cmds.mutex); |
1844 | init_completion(&ioc->taskmgmt_cmds.done); | |
f0f09d3b | 1845 | |
1da177e4 LT |
1846 | /* Initialize the event logging. |
1847 | */ | |
1848 | ioc->eventTypes = 0; /* None */ | |
1849 | ioc->eventContext = 0; | |
1850 | ioc->eventLogSize = 0; | |
1851 | ioc->events = NULL; | |
1852 | ||
1853 | #ifdef MFCNT | |
1854 | ioc->mfcnt = 0; | |
1855 | #endif | |
1856 | ||
2f187862 | 1857 | ioc->sh = NULL; |
1da177e4 LT |
1858 | ioc->cached_fw = NULL; |
1859 | ||
421f91d2 | 1860 | /* Initialize SCSI Config Data structure |
1da177e4 | 1861 | */ |
466544d8 | 1862 | memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); |
1da177e4 | 1863 | |
05e8ec17 MR |
1864 | /* Initialize the fc rport list head. |
1865 | */ | |
1866 | INIT_LIST_HEAD(&ioc->fc_rports); | |
1867 | ||
1da177e4 LT |
1868 | /* Find lookup slot. */ |
1869 | INIT_LIST_HEAD(&ioc->list); | |
c6678e0c | 1870 | |
d54d48b8 PS |
1871 | |
1872 | /* Initialize workqueue */ | |
1873 | INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work); | |
d54d48b8 | 1874 | |
2f187862 | 1875 | snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN, |
aab0de24 | 1876 | "mpt_poll_%d", ioc->id); |
d54d48b8 PS |
1877 | ioc->reset_work_q = |
1878 | create_singlethread_workqueue(ioc->reset_work_q_name); | |
1879 | if (!ioc->reset_work_q) { | |
1880 | printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", | |
1881 | ioc->name); | |
1882 | pci_release_selected_regions(pdev, ioc->bars); | |
1883 | kfree(ioc); | |
1884 | return -ENOMEM; | |
1885 | } | |
1886 | ||
29dd3609 EM |
1887 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n", |
1888 | ioc->name, &ioc->facts, &ioc->pfacts[0])); | |
1da177e4 | 1889 | |
9ceb5c16 SS |
1890 | mpt_get_product_name(pdev->vendor, pdev->device, pdev->revision, |
1891 | ioc->prod_name); | |
ef1d8df7 PS |
1892 | |
1893 | switch (pdev->device) | |
1894 | { | |
1895 | case MPI_MANUFACTPAGE_DEVICEID_FC939X: | |
1896 | case MPI_MANUFACTPAGE_DEVICEID_FC949X: | |
1897 | ioc->errata_flag_1064 = 1; | |
1898 | case MPI_MANUFACTPAGE_DEVICEID_FC909: | |
1899 | case MPI_MANUFACTPAGE_DEVICEID_FC929: | |
1900 | case MPI_MANUFACTPAGE_DEVICEID_FC919: | |
1901 | case MPI_MANUFACTPAGE_DEVICEID_FC949E: | |
1da177e4 | 1902 | ioc->bus_type = FC; |
ef1d8df7 PS |
1903 | break; |
1904 | ||
1905 | case MPI_MANUFACTPAGE_DEVICEID_FC929X: | |
9ceb5c16 | 1906 | if (pdev->revision < XL_929) { |
1da177e4 LT |
1907 | /* 929X Chip Fix. Set Split transactions level |
1908 | * for PCIX. Set MOST bits to zero. | |
1909 | */ | |
1910 | pci_read_config_byte(pdev, 0x6a, &pcixcmd); | |
1911 | pcixcmd &= 0x8F; | |
1912 | pci_write_config_byte(pdev, 0x6a, pcixcmd); | |
1913 | } else { | |
1da177e4 LT |
1914 | /* 929XL Chip Fix. Set MMRBC to 0x08. |
1915 | */ | |
1916 | pci_read_config_byte(pdev, 0x6a, &pcixcmd); | |
1917 | pcixcmd |= 0x08; | |
1918 | pci_write_config_byte(pdev, 0x6a, pcixcmd); | |
1919 | } | |
1da177e4 | 1920 | ioc->bus_type = FC; |
ef1d8df7 PS |
1921 | break; |
1922 | ||
1923 | case MPI_MANUFACTPAGE_DEVICEID_FC919X: | |
1da177e4 LT |
1924 | /* 919X Chip Fix. Set Split transactions level |
1925 | * for PCIX. Set MOST bits to zero. | |
1926 | */ | |
1927 | pci_read_config_byte(pdev, 0x6a, &pcixcmd); | |
1928 | pcixcmd &= 0x8F; | |
1929 | pci_write_config_byte(pdev, 0x6a, pcixcmd); | |
6d5b0c31 | 1930 | ioc->bus_type = FC; |
ef1d8df7 PS |
1931 | break; |
1932 | ||
1933 | case MPI_MANUFACTPAGE_DEVID_53C1030: | |
1da177e4 LT |
1934 | /* 1030 Chip Fix. Disable Split transactions |
1935 | * for PCIX. Set MOST bits to zero if Rev < C0( = 8). | |
1936 | */ | |
9ceb5c16 | 1937 | if (pdev->revision < C0_1030) { |
1da177e4 LT |
1938 | pci_read_config_byte(pdev, 0x6a, &pcixcmd); |
1939 | pcixcmd &= 0x8F; | |
1940 | pci_write_config_byte(pdev, 0x6a, pcixcmd); | |
1941 | } | |
ef1d8df7 PS |
1942 | |
1943 | case MPI_MANUFACTPAGE_DEVID_1030_53C1035: | |
a9b2937a | 1944 | ioc->bus_type = SPI; |
ef1d8df7 PS |
1945 | break; |
1946 | ||
1947 | case MPI_MANUFACTPAGE_DEVID_SAS1064: | |
1948 | case MPI_MANUFACTPAGE_DEVID_SAS1068: | |
82ffb671 | 1949 | ioc->errata_flag_1064 = 1; |
2f187862 KD |
1950 | ioc->bus_type = SAS; |
1951 | break; | |
ef1d8df7 PS |
1952 | |
1953 | case MPI_MANUFACTPAGE_DEVID_SAS1064E: | |
1954 | case MPI_MANUFACTPAGE_DEVID_SAS1068E: | |
1955 | case MPI_MANUFACTPAGE_DEVID_SAS1078: | |
87cf8986 | 1956 | ioc->bus_type = SAS; |
2f187862 | 1957 | break; |
87cf8986 | 1958 | } |
1da177e4 | 1959 | |
23a274c8 | 1960 | |
e382968b KD |
1961 | switch (ioc->bus_type) { |
1962 | ||
1963 | case SAS: | |
1964 | ioc->msi_enable = mpt_msi_enable_sas; | |
1965 | break; | |
1966 | ||
1967 | case SPI: | |
1968 | ioc->msi_enable = mpt_msi_enable_spi; | |
1969 | break; | |
1970 | ||
1971 | case FC: | |
1972 | ioc->msi_enable = mpt_msi_enable_fc; | |
1973 | break; | |
1974 | ||
1975 | default: | |
1976 | ioc->msi_enable = 0; | |
1977 | break; | |
1978 | } | |
8ce13de2 KD |
1979 | |
1980 | ioc->fw_events_off = 1; | |
1981 | ||
3fadc59d MED |
1982 | if (ioc->errata_flag_1064) |
1983 | pci_disable_io_access(pdev); | |
1984 | ||
1da177e4 LT |
1985 | spin_lock_init(&ioc->FreeQlock); |
1986 | ||
1987 | /* Disable all! */ | |
1988 | CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); | |
1989 | ioc->active = 0; | |
1990 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
1991 | ||
07df8afa PS |
1992 | /* Set IOC ptr in the pcidev's driver data. */ |
1993 | pci_set_drvdata(ioc->pcidev, ioc); | |
1994 | ||
1da177e4 LT |
1995 | /* Set lookup ptr. */ |
1996 | list_add_tail(&ioc->list, &ioc_list); | |
1997 | ||
7fadc87e | 1998 | /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets. |
1da177e4 LT |
1999 | */ |
2000 | mpt_detect_bound_ports(ioc, pdev); | |
2001 | ||
3eb0822c KD |
2002 | INIT_LIST_HEAD(&ioc->fw_event_list); |
2003 | spin_lock_init(&ioc->fw_event_lock); | |
2f187862 | 2004 | snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id); |
3eb0822c KD |
2005 | ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name); |
2006 | ||
c92f222e JB |
2007 | if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, |
2008 | CAN_SLEEP)) != 0){ | |
29dd3609 EM |
2009 | printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n", |
2010 | ioc->name, r); | |
ba856d32 | 2011 | |
1da177e4 | 2012 | list_del(&ioc->list); |
335a9412 ME |
2013 | if (ioc->alt_ioc) |
2014 | ioc->alt_ioc->alt_ioc = NULL; | |
4d4109d0 PS |
2015 | iounmap(ioc->memmap); |
2016 | if (r != -5) | |
2017 | pci_release_selected_regions(pdev, ioc->bars); | |
d54d48b8 PS |
2018 | |
2019 | destroy_workqueue(ioc->reset_work_q); | |
2020 | ioc->reset_work_q = NULL; | |
2021 | ||
1da177e4 LT |
2022 | kfree(ioc); |
2023 | pci_set_drvdata(pdev, NULL); | |
2024 | return r; | |
2025 | } | |
2026 | ||
2027 | /* call per device driver probe entry point */ | |
8d6d83e9 | 2028 | for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { |
f606f571 PS |
2029 | if(MptDeviceDriverHandlers[cb_idx] && |
2030 | MptDeviceDriverHandlers[cb_idx]->probe) { | |
2031 | MptDeviceDriverHandlers[cb_idx]->probe(pdev,id); | |
1da177e4 LT |
2032 | } |
2033 | } | |
2034 | ||
2035 | #ifdef CONFIG_PROC_FS | |
2036 | /* | |
2037 | * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter. | |
2038 | */ | |
2039 | dent = proc_mkdir(ioc->name, mpt_proc_root_dir); | |
2040 | if (dent) { | |
eb6edad3 AD |
2041 | proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc); |
2042 | proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc); | |
1da177e4 LT |
2043 | } |
2044 | #endif | |
2045 | ||
d54d48b8 PS |
2046 | if (!ioc->alt_ioc) |
2047 | queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, | |
2048 | msecs_to_jiffies(MPT_POLLING_INTERVAL)); | |
2049 | ||
1da177e4 LT |
2050 | return 0; |
2051 | } | |
2052 | ||
2053 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 2054 | /** |
7fadc87e | 2055 | * mpt_detach - Remove a PCI intelligent MPT adapter. |
1da177e4 | 2056 | * @pdev: Pointer to pci_dev structure |
1da177e4 LT |
2057 | */ |
2058 | ||
7fadc87e MED |
2059 | void |
2060 | mpt_detach(struct pci_dev *pdev) | |
1da177e4 LT |
2061 | { |
2062 | MPT_ADAPTER *ioc = pci_get_drvdata(pdev); | |
2063 | char pname[32]; | |
f606f571 | 2064 | u8 cb_idx; |
d54d48b8 PS |
2065 | unsigned long flags; |
2066 | struct workqueue_struct *wq; | |
2067 | ||
2068 | /* | |
2069 | * Stop polling ioc for fault condition | |
2070 | */ | |
2f187862 | 2071 | spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
d54d48b8 PS |
2072 | wq = ioc->reset_work_q; |
2073 | ioc->reset_work_q = NULL; | |
2f187862 | 2074 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
d54d48b8 PS |
2075 | cancel_delayed_work(&ioc->fault_reset_work); |
2076 | destroy_workqueue(wq); | |
2077 | ||
3eb0822c KD |
2078 | spin_lock_irqsave(&ioc->fw_event_lock, flags); |
2079 | wq = ioc->fw_event_q; | |
2080 | ioc->fw_event_q = NULL; | |
2081 | spin_unlock_irqrestore(&ioc->fw_event_lock, flags); | |
2082 | destroy_workqueue(wq); | |
1da177e4 LT |
2083 | |
2084 | sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name); | |
2085 | remove_proc_entry(pname, NULL); | |
2086 | sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name); | |
2087 | remove_proc_entry(pname, NULL); | |
2088 | sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name); | |
2089 | remove_proc_entry(pname, NULL); | |
c6678e0c | 2090 | |
1da177e4 | 2091 | /* call per device driver remove entry point */ |
8d6d83e9 | 2092 | for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { |
f606f571 PS |
2093 | if(MptDeviceDriverHandlers[cb_idx] && |
2094 | MptDeviceDriverHandlers[cb_idx]->remove) { | |
2095 | MptDeviceDriverHandlers[cb_idx]->remove(pdev); | |
1da177e4 LT |
2096 | } |
2097 | } | |
c6678e0c | 2098 | |
1da177e4 LT |
2099 | /* Disable interrupts! */ |
2100 | CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); | |
2101 | ||
2102 | ioc->active = 0; | |
2103 | synchronize_irq(pdev->irq); | |
2104 | ||
2105 | /* Clear any lingering interrupt */ | |
2106 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
2107 | ||
2108 | CHIPREG_READ32(&ioc->chip->IntStatus); | |
2109 | ||
2110 | mpt_adapter_dispose(ioc); | |
2111 | ||
1da177e4 LT |
2112 | } |
2113 | ||
1da177e4 LT |
2114 | /************************************************************************** |
2115 | * Power Management | |
2116 | */ | |
2117 | #ifdef CONFIG_PM | |
2118 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 2119 | /** |
7fadc87e | 2120 | * mpt_suspend - Fusion MPT base driver suspend routine. |
d9489fb6 RD |
2121 | * @pdev: Pointer to pci_dev structure |
2122 | * @state: new state to enter | |
1da177e4 | 2123 | */ |
7fadc87e MED |
2124 | int |
2125 | mpt_suspend(struct pci_dev *pdev, pm_message_t state) | |
1da177e4 LT |
2126 | { |
2127 | u32 device_state; | |
2128 | MPT_ADAPTER *ioc = pci_get_drvdata(pdev); | |
1da177e4 | 2129 | |
4d4109d0 PS |
2130 | device_state = pci_choose_state(pdev, state); |
2131 | printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering " | |
2132 | "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), | |
2133 | device_state); | |
1da177e4 LT |
2134 | |
2135 | /* put ioc into READY_STATE */ | |
2136 | if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) { | |
2137 | printk(MYIOC_s_ERR_FMT | |
2138 | "pci-suspend: IOC msg unit reset failed!\n", ioc->name); | |
2139 | } | |
2140 | ||
2141 | /* disable interrupts */ | |
2142 | CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); | |
2143 | ioc->active = 0; | |
2144 | ||
2145 | /* Clear any lingering interrupt */ | |
2146 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
2147 | ||
4d4109d0 | 2148 | free_irq(ioc->pci_irq, ioc); |
b8e3d3ae | 2149 | if (ioc->msi_enable) |
4d4109d0 PS |
2150 | pci_disable_msi(ioc->pcidev); |
2151 | ioc->pci_irq = -1; | |
2152 | pci_save_state(pdev); | |
1da177e4 | 2153 | pci_disable_device(pdev); |
e78d5b8f | 2154 | pci_release_selected_regions(pdev, ioc->bars); |
1da177e4 | 2155 | pci_set_power_state(pdev, device_state); |
1da177e4 LT |
2156 | return 0; |
2157 | } | |
2158 | ||
2159 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 2160 | /** |
7fadc87e | 2161 | * mpt_resume - Fusion MPT base driver resume routine. |
d9489fb6 | 2162 | * @pdev: Pointer to pci_dev structure |
1da177e4 | 2163 | */ |
7fadc87e MED |
2164 | int |
2165 | mpt_resume(struct pci_dev *pdev) | |
1da177e4 LT |
2166 | { |
2167 | MPT_ADAPTER *ioc = pci_get_drvdata(pdev); | |
2168 | u32 device_state = pdev->current_state; | |
2169 | int recovery_state; | |
4d4109d0 | 2170 | int err; |
c6678e0c | 2171 | |
4d4109d0 PS |
2172 | printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous " |
2173 | "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), | |
2174 | device_state); | |
1da177e4 | 2175 | |
4d4109d0 PS |
2176 | pci_set_power_state(pdev, PCI_D0); |
2177 | pci_enable_wake(pdev, PCI_D0, 0); | |
1da177e4 | 2178 | pci_restore_state(pdev); |
4d4109d0 PS |
2179 | ioc->pcidev = pdev; |
2180 | err = mpt_mapresources(ioc); | |
2181 | if (err) | |
2182 | return err; | |
1da177e4 | 2183 | |
14d0f0b0 KD |
2184 | if (ioc->dma_mask == DMA_BIT_MASK(64)) { |
2185 | if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) | |
2186 | ioc->add_sge = &mpt_add_sge_64bit_1078; | |
2187 | else | |
2188 | ioc->add_sge = &mpt_add_sge_64bit; | |
2189 | ioc->add_chain = &mpt_add_chain_64bit; | |
2190 | ioc->sg_addr_size = 8; | |
2191 | } else { | |
2192 | ||
2193 | ioc->add_sge = &mpt_add_sge; | |
2194 | ioc->add_chain = &mpt_add_chain; | |
2195 | ioc->sg_addr_size = 4; | |
2196 | } | |
2197 | ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; | |
2198 | ||
4d4109d0 PS |
2199 | printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n", |
2200 | ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT), | |
2201 | CHIPREG_READ32(&ioc->chip->Doorbell)); | |
1da177e4 | 2202 | |
4d4109d0 PS |
2203 | /* |
2204 | * Errata workaround for SAS pci express: | |
2205 | * Upon returning to the D0 state, the contents of the doorbell will be | |
2206 | * stale data, and this will incorrectly signal to the host driver that | |
2207 | * the firmware is ready to process mpt commands. The workaround is | |
2208 | * to issue a diagnostic reset. | |
2209 | */ | |
2210 | if (ioc->bus_type == SAS && (pdev->device == | |
2211 | MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device == | |
2212 | MPI_MANUFACTPAGE_DEVID_SAS1064E)) { | |
2213 | if (KickStart(ioc, 1, CAN_SLEEP) < 0) { | |
2214 | printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n", | |
2215 | ioc->name); | |
2216 | goto out; | |
2217 | } | |
2218 | } | |
1da177e4 LT |
2219 | |
2220 | /* bring ioc to operational state */ | |
4d4109d0 PS |
2221 | printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name); |
2222 | recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, | |
2223 | CAN_SLEEP); | |
2224 | if (recovery_state != 0) | |
2225 | printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, " | |
2226 | "error:[%x]\n", ioc->name, recovery_state); | |
2227 | else | |
1da177e4 | 2228 | printk(MYIOC_s_INFO_FMT |
4d4109d0 PS |
2229 | "pci-resume: success\n", ioc->name); |
2230 | out: | |
1da177e4 | 2231 | return 0; |
4d4109d0 | 2232 | |
1da177e4 LT |
2233 | } |
2234 | #endif | |
2235 | ||
4ff42a66 | 2236 | static int |
f606f571 | 2237 | mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase) |
4ff42a66 JB |
2238 | { |
2239 | if ((MptDriverClass[index] == MPTSPI_DRIVER && | |
2240 | ioc->bus_type != SPI) || | |
2241 | (MptDriverClass[index] == MPTFC_DRIVER && | |
2242 | ioc->bus_type != FC) || | |
2243 | (MptDriverClass[index] == MPTSAS_DRIVER && | |
2244 | ioc->bus_type != SAS)) | |
2245 | /* make sure we only call the relevant reset handler | |
2246 | * for the bus */ | |
2247 | return 0; | |
2248 | return (MptResetHandlers[index])(ioc, reset_phase); | |
2249 | } | |
2250 | ||
1da177e4 | 2251 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
d9489fb6 | 2252 | /** |
1da177e4 LT |
2253 | * mpt_do_ioc_recovery - Initialize or recover MPT adapter. |
2254 | * @ioc: Pointer to MPT adapter structure | |
2255 | * @reason: Event word / reason | |
2256 | * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. | |
2257 | * | |
2258 | * This routine performs all the steps necessary to bring the IOC | |
2259 | * to a OPERATIONAL state. | |
2260 | * | |
2261 | * This routine also pre-fetches the LAN MAC address of a Fibre Channel | |
2262 | * MPT adapter. | |
2263 | * | |
2264 | * Returns: | |
2265 | * 0 for success | |
2266 | * -1 if failed to get board READY | |
2267 | * -2 if READY but IOCFacts Failed | |
2268 | * -3 if READY but PrimeIOCFifos Failed | |
2269 | * -4 if READY but IOCInit Failed | |
e78d5b8f | 2270 | * -5 if failed to enable_device and/or request_selected_regions |
4d4109d0 | 2271 | * -6 if failed to upload firmware |
1da177e4 LT |
2272 | */ |
2273 | static int | |
2274 | mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) | |
2275 | { | |
2276 | int hard_reset_done = 0; | |
2277 | int alt_ioc_ready = 0; | |
2278 | int hard; | |
2279 | int rc=0; | |
2280 | int ii; | |
1da177e4 LT |
2281 | int ret = 0; |
2282 | int reset_alt_ioc_active = 0; | |
9bf0a28c | 2283 | int irq_allocated = 0; |
436ace72 | 2284 | u8 *a; |
1da177e4 | 2285 | |
29dd3609 EM |
2286 | printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name, |
2287 | reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery"); | |
1da177e4 LT |
2288 | |
2289 | /* Disable reply interrupts (also blocks FreeQ) */ | |
2290 | CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); | |
2291 | ioc->active = 0; | |
2292 | ||
2293 | if (ioc->alt_ioc) { | |
2f187862 KD |
2294 | if (ioc->alt_ioc->active || |
2295 | reason == MPT_HOSTEVENT_IOC_RECOVER) { | |
1da177e4 | 2296 | reset_alt_ioc_active = 1; |
2f187862 KD |
2297 | /* Disable alt-IOC's reply interrupts |
2298 | * (and FreeQ) for a bit | |
2299 | **/ | |
2300 | CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, | |
2301 | 0xFFFFFFFF); | |
2302 | ioc->alt_ioc->active = 0; | |
2303 | } | |
1da177e4 LT |
2304 | } |
2305 | ||
2306 | hard = 1; | |
2307 | if (reason == MPT_HOSTEVENT_IOC_BRINGUP) | |
2308 | hard = 0; | |
2309 | ||
2310 | if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) { | |
2311 | if (hard_reset_done == -4) { | |
29dd3609 EM |
2312 | printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n", |
2313 | ioc->name); | |
1da177e4 LT |
2314 | |
2315 | if (reset_alt_ioc_active && ioc->alt_ioc) { | |
2316 | /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */ | |
29dd3609 EM |
2317 | dprintk(ioc, printk(MYIOC_s_INFO_FMT |
2318 | "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name)); | |
569b11dc | 2319 | CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM); |
1da177e4 LT |
2320 | ioc->alt_ioc->active = 1; |
2321 | } | |
2322 | ||
2323 | } else { | |
2f187862 KD |
2324 | printk(MYIOC_s_WARN_FMT |
2325 | "NOT READY WARNING!\n", ioc->name); | |
1da177e4 | 2326 | } |
2f187862 KD |
2327 | ret = -1; |
2328 | goto out; | |
1da177e4 LT |
2329 | } |
2330 | ||
2331 | /* hard_reset_done = 0 if a soft reset was performed | |
2332 | * and 1 if a hard reset was performed. | |
2333 | */ | |
2334 | if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) { | |
2335 | if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0) | |
2336 | alt_ioc_ready = 1; | |
2337 | else | |
2f187862 KD |
2338 | printk(MYIOC_s_WARN_FMT |
2339 | ": alt-ioc Not ready WARNING!\n", | |
2340 | ioc->alt_ioc->name); | |
1da177e4 LT |
2341 | } |
2342 | ||
2343 | for (ii=0; ii<5; ii++) { | |
2344 | /* Get IOC facts! Allow 5 retries */ | |
2345 | if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0) | |
2346 | break; | |
2347 | } | |
c6678e0c | 2348 | |
1da177e4 LT |
2349 | |
2350 | if (ii == 5) { | |
29dd3609 EM |
2351 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
2352 | "Retry IocFacts failed rc=%x\n", ioc->name, rc)); | |
1da177e4 LT |
2353 | ret = -2; |
2354 | } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { | |
2355 | MptDisplayIocCapabilities(ioc); | |
2356 | } | |
c6678e0c | 2357 | |
1da177e4 LT |
2358 | if (alt_ioc_ready) { |
2359 | if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) { | |
436ace72 | 2360 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
2f187862 KD |
2361 | "Initial Alt IocFacts failed rc=%x\n", |
2362 | ioc->name, rc)); | |
1da177e4 LT |
2363 | /* Retry - alt IOC was initialized once |
2364 | */ | |
2365 | rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason); | |
2366 | } | |
2367 | if (rc) { | |
436ace72 | 2368 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
29dd3609 | 2369 | "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc)); |
1da177e4 LT |
2370 | alt_ioc_ready = 0; |
2371 | reset_alt_ioc_active = 0; | |
2372 | } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { | |
2373 | MptDisplayIocCapabilities(ioc->alt_ioc); | |
2374 | } | |
2375 | } | |
2376 | ||
e78d5b8f PS |
2377 | if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) && |
2378 | (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) { | |
2379 | pci_release_selected_regions(ioc->pcidev, ioc->bars); | |
2380 | ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM | | |
2381 | IORESOURCE_IO); | |
2382 | if (pci_enable_device(ioc->pcidev)) | |
2383 | return -5; | |
2384 | if (pci_request_selected_regions(ioc->pcidev, ioc->bars, | |
2385 | "mpt")) | |
2386 | return -5; | |
2387 | } | |
2388 | ||
9bf0a28c VG |
2389 | /* |
2390 | * Device is reset now. It must have de-asserted the interrupt line | |
2391 | * (if it was asserted) and it should be safe to register for the | |
2392 | * interrupt now. | |
2393 | */ | |
2394 | if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { | |
2395 | ioc->pci_irq = -1; | |
2396 | if (ioc->pcidev->irq) { | |
23a274c8 | 2397 | if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev)) |
9bf0a28c | 2398 | printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", |
29dd3609 | 2399 | ioc->name); |
23a274c8 PS |
2400 | else |
2401 | ioc->msi_enable = 0; | |
9bf0a28c | 2402 | rc = request_irq(ioc->pcidev->irq, mpt_interrupt, |
29dd3609 | 2403 | IRQF_SHARED, ioc->name, ioc); |
9bf0a28c | 2404 | if (rc < 0) { |
9bf0a28c | 2405 | printk(MYIOC_s_ERR_FMT "Unable to allocate " |
2f187862 KD |
2406 | "interrupt %d!\n", |
2407 | ioc->name, ioc->pcidev->irq); | |
23a274c8 | 2408 | if (ioc->msi_enable) |
9bf0a28c | 2409 | pci_disable_msi(ioc->pcidev); |
2f187862 KD |
2410 | ret = -EBUSY; |
2411 | goto out; | |
9bf0a28c VG |
2412 | } |
2413 | irq_allocated = 1; | |
2414 | ioc->pci_irq = ioc->pcidev->irq; | |
2415 | pci_set_master(ioc->pcidev); /* ?? */ | |
2f187862 KD |
2416 | pci_set_drvdata(ioc->pcidev, ioc); |
2417 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT | |
2418 | "installed at interrupt %d\n", ioc->name, | |
2419 | ioc->pcidev->irq)); | |
9bf0a28c VG |
2420 | } |
2421 | } | |
2422 | ||
1da177e4 LT |
2423 | /* Prime reply & request queues! |
2424 | * (mucho alloc's) Must be done prior to | |
2425 | * init as upper addresses are needed for init. | |
2426 | * If fails, continue with alt-ioc processing | |
2427 | */ | |
2f187862 KD |
2428 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n", |
2429 | ioc->name)); | |
1da177e4 LT |
2430 | if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0)) |
2431 | ret = -3; | |
2432 | ||
2433 | /* May need to check/upload firmware & data here! | |
2434 | * If fails, continue with alt-ioc processing | |
2435 | */ | |
2f187862 KD |
2436 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n", |
2437 | ioc->name)); | |
1da177e4 LT |
2438 | if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0)) |
2439 | ret = -4; | |
2440 | // NEW! | |
2441 | if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) { | |
2f187862 KD |
2442 | printk(MYIOC_s_WARN_FMT |
2443 | ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n", | |
29dd3609 | 2444 | ioc->alt_ioc->name, rc); |
1da177e4 LT |
2445 | alt_ioc_ready = 0; |
2446 | reset_alt_ioc_active = 0; | |
2447 | } | |
2448 | ||
2449 | if (alt_ioc_ready) { | |
2450 | if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) { | |
2451 | alt_ioc_ready = 0; | |
2452 | reset_alt_ioc_active = 0; | |
2f187862 KD |
2453 | printk(MYIOC_s_WARN_FMT |
2454 | ": alt-ioc: (%d) init failure WARNING!\n", | |
2455 | ioc->alt_ioc->name, rc); | |
1da177e4 LT |
2456 | } |
2457 | } | |
2458 | ||
2459 | if (reason == MPT_HOSTEVENT_IOC_BRINGUP){ | |
2460 | if (ioc->upload_fw) { | |
436ace72 | 2461 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
29dd3609 | 2462 | "firmware upload required!\n", ioc->name)); |
1da177e4 LT |
2463 | |
2464 | /* Controller is not operational, cannot do upload | |
2465 | */ | |
2466 | if (ret == 0) { | |
2467 | rc = mpt_do_upload(ioc, sleepFlag); | |
466544d8 MED |
2468 | if (rc == 0) { |
2469 | if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { | |
2470 | /* | |
2471 | * Maintain only one pointer to FW memory | |
2472 | * so there will not be two attempt to | |
2473 | * downloadboot onboard dual function | |
2474 | * chips (mpt_adapter_disable, | |
2475 | * mpt_diag_reset) | |
2476 | */ | |
436ace72 | 2477 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
29dd3609 EM |
2478 | "mpt_upload: alt_%s has cached_fw=%p \n", |
2479 | ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw)); | |
984621b4 | 2480 | ioc->cached_fw = NULL; |
466544d8 MED |
2481 | } |
2482 | } else { | |
29dd3609 EM |
2483 | printk(MYIOC_s_WARN_FMT |
2484 | "firmware upload failure!\n", ioc->name); | |
4d4109d0 | 2485 | ret = -6; |
466544d8 | 2486 | } |
1da177e4 LT |
2487 | } |
2488 | } | |
2489 | } | |
2490 | ||
fd76175a KD |
2491 | /* Enable MPT base driver management of EventNotification |
2492 | * and EventAck handling. | |
2493 | */ | |
2494 | if ((ret == 0) && (!ioc->facts.EventState)) { | |
2495 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT | |
2496 | "SendEventNotification\n", | |
2497 | ioc->name)); | |
2498 | ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */ | |
2499 | } | |
2500 | ||
2501 | if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState) | |
2502 | rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag); | |
2503 | ||
1da177e4 LT |
2504 | if (ret == 0) { |
2505 | /* Enable! (reply interrupt) */ | |
569b11dc | 2506 | CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); |
1da177e4 LT |
2507 | ioc->active = 1; |
2508 | } | |
fd76175a KD |
2509 | if (rc == 0) { /* alt ioc */ |
2510 | if (reset_alt_ioc_active && ioc->alt_ioc) { | |
2511 | /* (re)Enable alt-IOC! (reply interrupt) */ | |
2512 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc" | |
2513 | "reply irq re-enabled\n", | |
2514 | ioc->alt_ioc->name)); | |
2515 | CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, | |
2516 | MPI_HIM_DIM); | |
2517 | ioc->alt_ioc->active = 1; | |
2518 | } | |
1da177e4 LT |
2519 | } |
2520 | ||
1da177e4 | 2521 | |
7fadc87e | 2522 | /* Add additional "reason" check before call to GetLanConfigPages |
1da177e4 LT |
2523 | * (combined with GetIoUnitPage2 call). This prevents a somewhat |
2524 | * recursive scenario; GetLanConfigPages times out, timer expired | |
2525 | * routine calls HardResetHandler, which calls into here again, | |
2526 | * and we try GetLanConfigPages again... | |
2527 | */ | |
2528 | if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { | |
b506ade9 EM |
2529 | |
2530 | /* | |
421f91d2 | 2531 | * Initialize link list for inactive raid volumes. |
b506ade9 | 2532 | */ |
ed5f606f | 2533 | mutex_init(&ioc->raid_data.inactive_list_mutex); |
b506ade9 EM |
2534 | INIT_LIST_HEAD(&ioc->raid_data.inactive_list); |
2535 | ||
2f187862 | 2536 | switch (ioc->bus_type) { |
82ffb671 | 2537 | |
2f187862 | 2538 | case SAS: |
82ffb671 CH |
2539 | /* clear persistency table */ |
2540 | if(ioc->facts.IOCExceptions & | |
2541 | MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) { | |
2542 | ret = mptbase_sas_persist_operation(ioc, | |
2543 | MPI_SAS_OP_CLEAR_NOT_PRESENT); | |
2544 | if(ret != 0) | |
9bf0a28c | 2545 | goto out; |
82ffb671 CH |
2546 | } |
2547 | ||
2548 | /* Find IM volumes | |
2549 | */ | |
2550 | mpt_findImVolumes(ioc); | |
2551 | ||
2f187862 KD |
2552 | /* Check, and possibly reset, the coalescing value |
2553 | */ | |
2554 | mpt_read_ioc_pg_1(ioc); | |
2555 | ||
2556 | break; | |
2557 | ||
2558 | case FC: | |
2559 | if ((ioc->pfacts[0].ProtocolFlags & | |
2560 | MPI_PORTFACTS_PROTOCOL_LAN) && | |
1da177e4 LT |
2561 | (ioc->lan_cnfg_page0.Header.PageLength == 0)) { |
2562 | /* | |
2563 | * Pre-fetch the ports LAN MAC address! | |
2564 | * (LANPage1_t stuff) | |
2565 | */ | |
2566 | (void) GetLanConfigPages(ioc); | |
436ace72 PS |
2567 | a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; |
2568 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
2f187862 KD |
2569 | "LanAddr = %02X:%02X:%02X" |
2570 | ":%02X:%02X:%02X\n", | |
2571 | ioc->name, a[5], a[4], | |
2572 | a[3], a[2], a[1], a[0])); | |
1da177e4 | 2573 | } |
2f187862 KD |
2574 | break; |
2575 | ||
2576 | case SPI: | |
1da177e4 LT |
2577 | /* Get NVRAM and adapter maximums from SPP 0 and 2 |
2578 | */ | |
2579 | mpt_GetScsiPortSettings(ioc, 0); | |
2580 | ||
2581 | /* Get version and length of SDP 1 | |
2582 | */ | |
2583 | mpt_readScsiDevicePageHeaders(ioc, 0); | |
2584 | ||
2585 | /* Find IM volumes | |
2586 | */ | |
c6678e0c | 2587 | if (ioc->facts.MsgVersion >= MPI_VERSION_01_02) |
1da177e4 LT |
2588 | mpt_findImVolumes(ioc); |
2589 | ||
2590 | /* Check, and possibly reset, the coalescing value | |
2591 | */ | |
2592 | mpt_read_ioc_pg_1(ioc); | |
2593 | ||
2594 | mpt_read_ioc_pg_4(ioc); | |
2f187862 KD |
2595 | |
2596 | break; | |
1da177e4 LT |
2597 | } |
2598 | ||
2599 | GetIoUnitPage2(ioc); | |
edb9068d | 2600 | mpt_get_manufacturing_pg_0(ioc); |
1da177e4 LT |
2601 | } |
2602 | ||
0ccdb007 | 2603 | out: |
9bf0a28c VG |
2604 | if ((ret != 0) && irq_allocated) { |
2605 | free_irq(ioc->pci_irq, ioc); | |
23a274c8 | 2606 | if (ioc->msi_enable) |
9bf0a28c VG |
2607 | pci_disable_msi(ioc->pcidev); |
2608 | } | |
1da177e4 LT |
2609 | return ret; |
2610 | } | |
2611 | ||
2612 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 RD |
2613 | /** |
2614 | * mpt_detect_bound_ports - Search for matching PCI bus/dev_function | |
1da177e4 LT |
2615 | * @ioc: Pointer to MPT adapter structure |
2616 | * @pdev: Pointer to (struct pci_dev) structure | |
2617 | * | |
d9489fb6 RD |
2618 | * Search for PCI bus/dev_function which matches |
2619 | * PCI bus/dev_function (+/-1) for newly discovered 929, | |
2620 | * 929X, 1030 or 1035. | |
2621 | * | |
1da177e4 LT |
2622 | * If match on PCI dev_function +/-1 is found, bind the two MPT adapters |
2623 | * using alt_ioc pointer fields in their %MPT_ADAPTER structures. | |
2624 | */ | |
2625 | static void | |
2626 | mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev) | |
2627 | { | |
7fadc87e MED |
2628 | struct pci_dev *peer=NULL; |
2629 | unsigned int slot = PCI_SLOT(pdev->devfn); | |
2630 | unsigned int func = PCI_FUNC(pdev->devfn); | |
1da177e4 LT |
2631 | MPT_ADAPTER *ioc_srch; |
2632 | ||
436ace72 | 2633 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x," |
7fadc87e | 2634 | " searching for devfn match on %x or %x\n", |
29dd3609 EM |
2635 | ioc->name, pci_name(pdev), pdev->bus->number, |
2636 | pdev->devfn, func-1, func+1)); | |
7fadc87e MED |
2637 | |
2638 | peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1)); | |
2639 | if (!peer) { | |
2640 | peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1)); | |
2641 | if (!peer) | |
2642 | return; | |
2643 | } | |
1da177e4 LT |
2644 | |
2645 | list_for_each_entry(ioc_srch, &ioc_list, list) { | |
2646 | struct pci_dev *_pcidev = ioc_srch->pcidev; | |
7fadc87e | 2647 | if (_pcidev == peer) { |
1da177e4 LT |
2648 | /* Paranoia checks */ |
2649 | if (ioc->alt_ioc != NULL) { | |
2f187862 KD |
2650 | printk(MYIOC_s_WARN_FMT |
2651 | "Oops, already bound (%s <==> %s)!\n", | |
2652 | ioc->name, ioc->name, ioc->alt_ioc->name); | |
1da177e4 LT |
2653 | break; |
2654 | } else if (ioc_srch->alt_ioc != NULL) { | |
2f187862 KD |
2655 | printk(MYIOC_s_WARN_FMT |
2656 | "Oops, already bound (%s <==> %s)!\n", | |
2657 | ioc_srch->name, ioc_srch->name, | |
2658 | ioc_srch->alt_ioc->name); | |
1da177e4 LT |
2659 | break; |
2660 | } | |
2f187862 KD |
2661 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
2662 | "FOUND! binding %s <==> %s\n", | |
2663 | ioc->name, ioc->name, ioc_srch->name)); | |
1da177e4 LT |
2664 | ioc_srch->alt_ioc = ioc; |
2665 | ioc->alt_ioc = ioc_srch; | |
1da177e4 LT |
2666 | } |
2667 | } | |
7fadc87e | 2668 | pci_dev_put(peer); |
1da177e4 LT |
2669 | } |
2670 | ||
2671 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 2672 | /** |
1da177e4 | 2673 | * mpt_adapter_disable - Disable misbehaving MPT adapter. |
d9489fb6 | 2674 | * @ioc: Pointer to MPT adapter structure |
1da177e4 LT |
2675 | */ |
2676 | static void | |
2677 | mpt_adapter_disable(MPT_ADAPTER *ioc) | |
2678 | { | |
2679 | int sz; | |
2680 | int ret; | |
2681 | ||
2682 | if (ioc->cached_fw != NULL) { | |
2f187862 KD |
2683 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
2684 | "%s: Pushing FW onto adapter\n", __func__, ioc->name)); | |
984621b4 PS |
2685 | if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *) |
2686 | ioc->cached_fw, CAN_SLEEP)) < 0) { | |
2687 | printk(MYIOC_s_WARN_FMT | |
2688 | ": firmware downloadboot failure (%d)!\n", | |
29dd3609 | 2689 | ioc->name, ret); |
1da177e4 LT |
2690 | } |
2691 | } | |
2692 | ||
71278192 KD |
2693 | /* |
2694 | * Put the controller into ready state (if its not already) | |
2695 | */ | |
2696 | if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) { | |
2697 | if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, | |
2698 | CAN_SLEEP)) { | |
2699 | if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) | |
2700 | printk(MYIOC_s_ERR_FMT "%s: IOC msg unit " | |
2701 | "reset failed to put ioc in ready state!\n", | |
2702 | ioc->name, __func__); | |
2703 | } else | |
2704 | printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset " | |
2705 | "failed!\n", ioc->name, __func__); | |
2706 | } | |
2707 | ||
2708 | ||
1da177e4 | 2709 | /* Disable adapter interrupts! */ |
2f187862 | 2710 | synchronize_irq(ioc->pcidev->irq); |
1da177e4 LT |
2711 | CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); |
2712 | ioc->active = 0; | |
2f187862 | 2713 | |
1da177e4 LT |
2714 | /* Clear any lingering interrupt */ |
2715 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
2f187862 | 2716 | CHIPREG_READ32(&ioc->chip->IntStatus); |
1da177e4 LT |
2717 | |
2718 | if (ioc->alloc != NULL) { | |
2719 | sz = ioc->alloc_sz; | |
29dd3609 EM |
2720 | dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n", |
2721 | ioc->name, ioc->alloc, ioc->alloc_sz)); | |
1da177e4 LT |
2722 | pci_free_consistent(ioc->pcidev, sz, |
2723 | ioc->alloc, ioc->alloc_dma); | |
2724 | ioc->reply_frames = NULL; | |
2725 | ioc->req_frames = NULL; | |
2726 | ioc->alloc = NULL; | |
2727 | ioc->alloc_total -= sz; | |
2728 | } | |
2729 | ||
2730 | if (ioc->sense_buf_pool != NULL) { | |
2731 | sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); | |
2732 | pci_free_consistent(ioc->pcidev, sz, | |
2733 | ioc->sense_buf_pool, ioc->sense_buf_pool_dma); | |
2734 | ioc->sense_buf_pool = NULL; | |
2735 | ioc->alloc_total -= sz; | |
2736 | } | |
2737 | ||
2738 | if (ioc->events != NULL){ | |
2739 | sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS); | |
2740 | kfree(ioc->events); | |
2741 | ioc->events = NULL; | |
2742 | ioc->alloc_total -= sz; | |
2743 | } | |
2744 | ||
984621b4 | 2745 | mpt_free_fw_memory(ioc); |
1da177e4 | 2746 | |
d485eb83 | 2747 | kfree(ioc->spi_data.nvram); |
b506ade9 EM |
2748 | mpt_inactive_raid_list_free(ioc); |
2749 | kfree(ioc->raid_data.pIocPg2); | |
466544d8 | 2750 | kfree(ioc->raid_data.pIocPg3); |
d485eb83 | 2751 | ioc->spi_data.nvram = NULL; |
466544d8 | 2752 | ioc->raid_data.pIocPg3 = NULL; |
1da177e4 LT |
2753 | |
2754 | if (ioc->spi_data.pIocPg4 != NULL) { | |
2755 | sz = ioc->spi_data.IocPg4Sz; | |
436ace72 | 2756 | pci_free_consistent(ioc->pcidev, sz, |
1da177e4 LT |
2757 | ioc->spi_data.pIocPg4, |
2758 | ioc->spi_data.IocPg4_dma); | |
2759 | ioc->spi_data.pIocPg4 = NULL; | |
2760 | ioc->alloc_total -= sz; | |
2761 | } | |
2762 | ||
2763 | if (ioc->ReqToChain != NULL) { | |
2764 | kfree(ioc->ReqToChain); | |
2765 | kfree(ioc->RequestNB); | |
2766 | ioc->ReqToChain = NULL; | |
2767 | } | |
2768 | ||
d485eb83 MED |
2769 | kfree(ioc->ChainToChain); |
2770 | ioc->ChainToChain = NULL; | |
82ffb671 CH |
2771 | |
2772 | if (ioc->HostPageBuffer != NULL) { | |
2773 | if((ret = mpt_host_page_access_control(ioc, | |
2774 | MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) { | |
29dd3609 | 2775 | printk(MYIOC_s_ERR_FMT |
2f187862 KD |
2776 | ": %s: host page buffers free failed (%d)!\n", |
2777 | ioc->name, __func__, ret); | |
82ffb671 | 2778 | } |
2f187862 KD |
2779 | dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
2780 | "HostPageBuffer free @ %p, sz=%d bytes\n", | |
2781 | ioc->name, ioc->HostPageBuffer, | |
2782 | ioc->HostPageBuffer_sz)); | |
82ffb671 | 2783 | pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz, |
29dd3609 | 2784 | ioc->HostPageBuffer, ioc->HostPageBuffer_dma); |
82ffb671 CH |
2785 | ioc->HostPageBuffer = NULL; |
2786 | ioc->HostPageBuffer_sz = 0; | |
2787 | ioc->alloc_total -= ioc->HostPageBuffer_sz; | |
2788 | } | |
1da177e4 | 2789 | |
2f187862 KD |
2790 | pci_set_drvdata(ioc->pcidev, NULL); |
2791 | } | |
1da177e4 | 2792 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
d9489fb6 RD |
2793 | /** |
2794 | * mpt_adapter_dispose - Free all resources associated with an MPT adapter | |
1da177e4 LT |
2795 | * @ioc: Pointer to MPT adapter structure |
2796 | * | |
2797 | * This routine unregisters h/w resources and frees all alloc'd memory | |
2798 | * associated with a MPT adapter structure. | |
2799 | */ | |
2800 | static void | |
2801 | mpt_adapter_dispose(MPT_ADAPTER *ioc) | |
2802 | { | |
c6678e0c | 2803 | int sz_first, sz_last; |
1da177e4 | 2804 | |
c6678e0c CH |
2805 | if (ioc == NULL) |
2806 | return; | |
1da177e4 | 2807 | |
c6678e0c | 2808 | sz_first = ioc->alloc_total; |
1da177e4 | 2809 | |
c6678e0c | 2810 | mpt_adapter_disable(ioc); |
1da177e4 | 2811 | |
c6678e0c CH |
2812 | if (ioc->pci_irq != -1) { |
2813 | free_irq(ioc->pci_irq, ioc); | |
23a274c8 | 2814 | if (ioc->msi_enable) |
4ddce14e | 2815 | pci_disable_msi(ioc->pcidev); |
c6678e0c CH |
2816 | ioc->pci_irq = -1; |
2817 | } | |
2818 | ||
2819 | if (ioc->memmap != NULL) { | |
2820 | iounmap(ioc->memmap); | |
2821 | ioc->memmap = NULL; | |
2822 | } | |
1da177e4 | 2823 | |
e78d5b8f PS |
2824 | pci_disable_device(ioc->pcidev); |
2825 | pci_release_selected_regions(ioc->pcidev, ioc->bars); | |
2826 | ||
1da177e4 | 2827 | #if defined(CONFIG_MTRR) && 0 |
c6678e0c CH |
2828 | if (ioc->mtrr_reg > 0) { |
2829 | mtrr_del(ioc->mtrr_reg, 0, 0); | |
29dd3609 | 2830 | dprintk(ioc, printk(MYIOC_s_INFO_FMT "MTRR region de-registered\n", ioc->name)); |
c6678e0c | 2831 | } |
1da177e4 LT |
2832 | #endif |
2833 | ||
c6678e0c CH |
2834 | /* Zap the adapter lookup ptr! */ |
2835 | list_del(&ioc->list); | |
1da177e4 | 2836 | |
c6678e0c | 2837 | sz_last = ioc->alloc_total; |
29dd3609 EM |
2838 | dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n", |
2839 | ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first)); | |
335a9412 ME |
2840 | |
2841 | if (ioc->alt_ioc) | |
2842 | ioc->alt_ioc->alt_ioc = NULL; | |
2843 | ||
c6678e0c | 2844 | kfree(ioc); |
1da177e4 LT |
2845 | } |
2846 | ||
2847 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 RD |
2848 | /** |
2849 | * MptDisplayIocCapabilities - Disply IOC's capabilities. | |
1da177e4 LT |
2850 | * @ioc: Pointer to MPT adapter structure |
2851 | */ | |
2852 | static void | |
2853 | MptDisplayIocCapabilities(MPT_ADAPTER *ioc) | |
2854 | { | |
2855 | int i = 0; | |
2856 | ||
2857 | printk(KERN_INFO "%s: ", ioc->name); | |
ef1d8df7 PS |
2858 | if (ioc->prod_name) |
2859 | printk("%s: ", ioc->prod_name); | |
1da177e4 LT |
2860 | printk("Capabilities={"); |
2861 | ||
2862 | if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) { | |
2863 | printk("Initiator"); | |
2864 | i++; | |
2865 | } | |
2866 | ||
2867 | if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { | |
2868 | printk("%sTarget", i ? "," : ""); | |
2869 | i++; | |
2870 | } | |
2871 | ||
2872 | if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { | |
2873 | printk("%sLAN", i ? "," : ""); | |
2874 | i++; | |
2875 | } | |
2876 | ||
2877 | #if 0 | |
2878 | /* | |
2879 | * This would probably evoke more questions than it's worth | |
2880 | */ | |
2881 | if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { | |
2882 | printk("%sLogBusAddr", i ? "," : ""); | |
2883 | i++; | |
2884 | } | |
2885 | #endif | |
2886 | ||
2887 | printk("}\n"); | |
2888 | } | |
2889 | ||
2890 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 2891 | /** |
1da177e4 LT |
2892 | * MakeIocReady - Get IOC to a READY state, using KickStart if needed. |
2893 | * @ioc: Pointer to MPT_ADAPTER structure | |
2894 | * @force: Force hard KickStart of IOC | |
2895 | * @sleepFlag: Specifies whether the process can sleep | |
2896 | * | |
2897 | * Returns: | |
2898 | * 1 - DIAG reset and READY | |
2899 | * 0 - READY initially OR soft reset and READY | |
2900 | * -1 - Any failure on KickStart | |
2901 | * -2 - Msg Unit Reset Failed | |
2902 | * -3 - IO Unit Reset Failed | |
2903 | * -4 - IOC owned by a PEER | |
2904 | */ | |
2905 | static int | |
2906 | MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) | |
2907 | { | |
2908 | u32 ioc_state; | |
2909 | int statefault = 0; | |
2910 | int cntdn; | |
2911 | int hard_reset_done = 0; | |
2912 | int r; | |
2913 | int ii; | |
2914 | int whoinit; | |
2915 | ||
2916 | /* Get current [raw] IOC state */ | |
2917 | ioc_state = mpt_GetIocState(ioc, 0); | |
29dd3609 | 2918 | dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state)); |
1da177e4 LT |
2919 | |
2920 | /* | |
2921 | * Check to see if IOC got left/stuck in doorbell handshake | |
2922 | * grip of death. If so, hard reset the IOC. | |
2923 | */ | |
2924 | if (ioc_state & MPI_DOORBELL_ACTIVE) { | |
2925 | statefault = 1; | |
2926 | printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n", | |
2927 | ioc->name); | |
2928 | } | |
2929 | ||
2930 | /* Is it already READY? */ | |
2f187862 KD |
2931 | if (!statefault && |
2932 | ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) { | |
2933 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT | |
2934 | "IOC is in READY state\n", ioc->name)); | |
1da177e4 | 2935 | return 0; |
2f187862 | 2936 | } |
1da177e4 LT |
2937 | |
2938 | /* | |
2939 | * Check to see if IOC is in FAULT state. | |
2940 | */ | |
2941 | if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { | |
2942 | statefault = 2; | |
2943 | printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n", | |
29dd3609 EM |
2944 | ioc->name); |
2945 | printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n", | |
2946 | ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK); | |
1da177e4 LT |
2947 | } |
2948 | ||
2949 | /* | |
2950 | * Hmmm... Did it get left operational? | |
2951 | */ | |
2952 | if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) { | |
436ace72 | 2953 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n", |
1da177e4 LT |
2954 | ioc->name)); |
2955 | ||
2956 | /* Check WhoInit. | |
2957 | * If PCI Peer, exit. | |
2958 | * Else, if no fault conditions are present, issue a MessageUnitReset | |
2959 | * Else, fall through to KickStart case | |
2960 | */ | |
2961 | whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT; | |
29dd3609 EM |
2962 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT |
2963 | "whoinit 0x%x statefault %d force %d\n", | |
2964 | ioc->name, whoinit, statefault, force)); | |
1da177e4 LT |
2965 | if (whoinit == MPI_WHOINIT_PCI_PEER) |
2966 | return -4; | |
2967 | else { | |
2968 | if ((statefault == 0 ) && (force == 0)) { | |
2969 | if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0) | |
2970 | return 0; | |
2971 | } | |
2972 | statefault = 3; | |
2973 | } | |
2974 | } | |
2975 | ||
2976 | hard_reset_done = KickStart(ioc, statefault||force, sleepFlag); | |
2977 | if (hard_reset_done < 0) | |
2978 | return -1; | |
2979 | ||
2980 | /* | |
2981 | * Loop here waiting for IOC to come READY. | |
2982 | */ | |
2983 | ii = 0; | |
82ffb671 | 2984 | cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */ |
1da177e4 LT |
2985 | |
2986 | while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { | |
2987 | if (ioc_state == MPI_IOC_STATE_OPERATIONAL) { | |
2988 | /* | |
2989 | * BIOS or previous driver load left IOC in OP state. | |
2990 | * Reset messaging FIFOs. | |
2991 | */ | |
2992 | if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) { | |
2993 | printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name); | |
2994 | return -2; | |
2995 | } | |
2996 | } else if (ioc_state == MPI_IOC_STATE_RESET) { | |
2997 | /* | |
2998 | * Something is wrong. Try to get IOC back | |
2999 | * to a known state. | |
3000 | */ | |
3001 | if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) { | |
3002 | printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name); | |
3003 | return -3; | |
3004 | } | |
3005 | } | |
3006 | ||
3007 | ii++; cntdn--; | |
3008 | if (!cntdn) { | |
2f187862 KD |
3009 | printk(MYIOC_s_ERR_FMT |
3010 | "Wait IOC_READY state (0x%x) timeout(%d)!\n", | |
3011 | ioc->name, ioc_state, (int)((ii+5)/HZ)); | |
1da177e4 LT |
3012 | return -ETIME; |
3013 | } | |
3014 | ||
3015 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 3016 | msleep(1); |
1da177e4 LT |
3017 | } else { |
3018 | mdelay (1); /* 1 msec delay */ | |
3019 | } | |
3020 | ||
3021 | } | |
3022 | ||
3023 | if (statefault < 3) { | |
2f187862 KD |
3024 | printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name, |
3025 | statefault == 1 ? "stuck handshake" : "IOC FAULT"); | |
1da177e4 LT |
3026 | } |
3027 | ||
3028 | return hard_reset_done; | |
3029 | } | |
3030 | ||
3031 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 3032 | /** |
1da177e4 LT |
3033 | * mpt_GetIocState - Get the current state of a MPT adapter. |
3034 | * @ioc: Pointer to MPT_ADAPTER structure | |
3035 | * @cooked: Request raw or cooked IOC state | |
3036 | * | |
3037 | * Returns all IOC Doorbell register bits if cooked==0, else just the | |
3038 | * Doorbell bits in MPI_IOC_STATE_MASK. | |
3039 | */ | |
3040 | u32 | |
3041 | mpt_GetIocState(MPT_ADAPTER *ioc, int cooked) | |
3042 | { | |
3043 | u32 s, sc; | |
3044 | ||
3045 | /* Get! */ | |
3046 | s = CHIPREG_READ32(&ioc->chip->Doorbell); | |
1da177e4 LT |
3047 | sc = s & MPI_IOC_STATE_MASK; |
3048 | ||
3049 | /* Save! */ | |
3050 | ioc->last_state = sc; | |
3051 | ||
3052 | return cooked ? sc : s; | |
3053 | } | |
3054 | ||
3055 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 3056 | /** |
1da177e4 LT |
3057 | * GetIocFacts - Send IOCFacts request to MPT adapter. |
3058 | * @ioc: Pointer to MPT_ADAPTER structure | |
3059 | * @sleepFlag: Specifies whether the process can sleep | |
3060 | * @reason: If recovery, only update facts. | |
3061 | * | |
3062 | * Returns 0 for success, non-zero for failure. | |
3063 | */ | |
3064 | static int | |
3065 | GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) | |
3066 | { | |
3067 | IOCFacts_t get_facts; | |
3068 | IOCFactsReply_t *facts; | |
3069 | int r; | |
3070 | int req_sz; | |
3071 | int reply_sz; | |
3072 | int sz; | |
3073 | u32 status, vv; | |
3074 | u8 shiftFactor=1; | |
3075 | ||
3076 | /* IOC *must* NOT be in RESET state! */ | |
3077 | if (ioc->last_state == MPI_IOC_STATE_RESET) { | |
2f187862 KD |
3078 | printk(KERN_ERR MYNAM |
3079 | ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n", | |
3080 | ioc->name, ioc->last_state); | |
1da177e4 LT |
3081 | return -44; |
3082 | } | |
3083 | ||
3084 | facts = &ioc->facts; | |
3085 | ||
3086 | /* Destination (reply area)... */ | |
3087 | reply_sz = sizeof(*facts); | |
3088 | memset(facts, 0, reply_sz); | |
3089 | ||
3090 | /* Request area (get_facts on the stack right now!) */ | |
3091 | req_sz = sizeof(get_facts); | |
3092 | memset(&get_facts, 0, req_sz); | |
3093 | ||
3094 | get_facts.Function = MPI_FUNCTION_IOC_FACTS; | |
3095 | /* Assert: All other get_facts fields are zero! */ | |
3096 | ||
436ace72 | 3097 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
c6678e0c | 3098 | "Sending get IocFacts request req_sz=%d reply_sz=%d\n", |
1da177e4 LT |
3099 | ioc->name, req_sz, reply_sz)); |
3100 | ||
3101 | /* No non-zero fields in the get_facts request are greater than | |
3102 | * 1 byte in size, so we can just fire it off as is. | |
3103 | */ | |
3104 | r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts, | |
3105 | reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag); | |
3106 | if (r != 0) | |
3107 | return r; | |
3108 | ||
3109 | /* | |
3110 | * Now byte swap (GRRR) the necessary fields before any further | |
3111 | * inspection of reply contents. | |
3112 | * | |
3113 | * But need to do some sanity checks on MsgLength (byte) field | |
3114 | * to make sure we don't zero IOC's req_sz! | |
3115 | */ | |
3116 | /* Did we get a valid reply? */ | |
3117 | if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) { | |
3118 | if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { | |
3119 | /* | |
3120 | * If not been here, done that, save off first WhoInit value | |
3121 | */ | |
3122 | if (ioc->FirstWhoInit == WHOINIT_UNKNOWN) | |
3123 | ioc->FirstWhoInit = facts->WhoInit; | |
3124 | } | |
3125 | ||
3126 | facts->MsgVersion = le16_to_cpu(facts->MsgVersion); | |
3127 | facts->MsgContext = le32_to_cpu(facts->MsgContext); | |
3128 | facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions); | |
3129 | facts->IOCStatus = le16_to_cpu(facts->IOCStatus); | |
3130 | facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo); | |
637fa99b | 3131 | status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK; |
1da177e4 LT |
3132 | /* CHECKME! IOCStatus, IOCLogInfo */ |
3133 | ||
3134 | facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth); | |
3135 | facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize); | |
3136 | ||
3137 | /* | |
3138 | * FC f/w version changed between 1.1 and 1.2 | |
3139 | * Old: u16{Major(4),Minor(4),SubMinor(8)} | |
3140 | * New: u32{Major(8),Minor(8),Unit(8),Dev(8)} | |
3141 | */ | |
2f187862 | 3142 | if (facts->MsgVersion < MPI_VERSION_01_02) { |
1da177e4 LT |
3143 | /* |
3144 | * Handle old FC f/w style, convert to new... | |
3145 | */ | |
3146 | u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion); | |
3147 | facts->FWVersion.Word = | |
3148 | ((oldv<<12) & 0xFF000000) | | |
3149 | ((oldv<<8) & 0x000FFF00); | |
3150 | } else | |
3151 | facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word); | |
3152 | ||
3153 | facts->ProductID = le16_to_cpu(facts->ProductID); | |
2f187862 | 3154 | |
b506ade9 EM |
3155 | if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) |
3156 | > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) | |
3157 | ioc->ir_firmware = 1; | |
2f187862 | 3158 | |
1da177e4 LT |
3159 | facts->CurrentHostMfaHighAddr = |
3160 | le32_to_cpu(facts->CurrentHostMfaHighAddr); | |
3161 | facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits); | |
3162 | facts->CurrentSenseBufferHighAddr = | |
3163 | le32_to_cpu(facts->CurrentSenseBufferHighAddr); | |
3164 | facts->CurReplyFrameSize = | |
3165 | le16_to_cpu(facts->CurReplyFrameSize); | |
82ffb671 | 3166 | facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities); |
1da177e4 LT |
3167 | |
3168 | /* | |
3169 | * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx | |
3170 | * Older MPI-1.00.xx struct had 13 dwords, and enlarged | |
3171 | * to 14 in MPI-1.01.0x. | |
3172 | */ | |
3173 | if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 && | |
2f187862 | 3174 | facts->MsgVersion > MPI_VERSION_01_00) { |
1da177e4 LT |
3175 | facts->FWImageSize = le32_to_cpu(facts->FWImageSize); |
3176 | } | |
3177 | ||
3178 | sz = facts->FWImageSize; | |
3179 | if ( sz & 0x01 ) | |
3180 | sz += 1; | |
3181 | if ( sz & 0x02 ) | |
3182 | sz += 2; | |
3183 | facts->FWImageSize = sz; | |
c6678e0c | 3184 | |
1da177e4 LT |
3185 | if (!facts->RequestFrameSize) { |
3186 | /* Something is wrong! */ | |
3187 | printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n", | |
3188 | ioc->name); | |
3189 | return -55; | |
3190 | } | |
3191 | ||
7fadc87e | 3192 | r = sz = facts->BlockSize; |
1da177e4 LT |
3193 | vv = ((63 / (sz * 4)) + 1) & 0x03; |
3194 | ioc->NB_for_64_byte_frame = vv; | |
3195 | while ( sz ) | |
3196 | { | |
3197 | shiftFactor++; | |
3198 | sz = sz >> 1; | |
3199 | } | |
3200 | ioc->NBShiftFactor = shiftFactor; | |
436ace72 | 3201 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
29dd3609 EM |
3202 | "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n", |
3203 | ioc->name, vv, shiftFactor, r)); | |
c6678e0c | 3204 | |
1da177e4 LT |
3205 | if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { |
3206 | /* | |
3207 | * Set values for this IOC's request & reply frame sizes, | |
3208 | * and request & reply queue depths... | |
3209 | */ | |
3210 | ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4); | |
3211 | ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits); | |
3212 | ioc->reply_sz = MPT_REPLY_FRAME_SIZE; | |
3213 | ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth); | |
3214 | ||
436ace72 | 3215 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n", |
1da177e4 | 3216 | ioc->name, ioc->reply_sz, ioc->reply_depth)); |
436ace72 | 3217 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n", |
1da177e4 LT |
3218 | ioc->name, ioc->req_sz, ioc->req_depth)); |
3219 | ||
3220 | /* Get port facts! */ | |
3221 | if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 ) | |
3222 | return r; | |
3223 | } | |
3224 | } else { | |
c6678e0c | 3225 | printk(MYIOC_s_ERR_FMT |
1da177e4 LT |
3226 | "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n", |
3227 | ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t, | |
3228 | RequestFrameSize)/sizeof(u32))); | |
3229 | return -66; | |
3230 | } | |
3231 | ||
3232 | return 0; | |
3233 | } | |
3234 | ||
3235 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 3236 | /** |
1da177e4 LT |
3237 | * GetPortFacts - Send PortFacts request to MPT adapter. |
3238 | * @ioc: Pointer to MPT_ADAPTER structure | |
3239 | * @portnum: Port number | |
3240 | * @sleepFlag: Specifies whether the process can sleep | |
3241 | * | |
3242 | * Returns 0 for success, non-zero for failure. | |
3243 | */ | |
3244 | static int | |
3245 | GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) | |
3246 | { | |
3247 | PortFacts_t get_pfacts; | |
3248 | PortFactsReply_t *pfacts; | |
3249 | int ii; | |
3250 | int req_sz; | |
3251 | int reply_sz; | |
793955f5 | 3252 | int max_id; |
1da177e4 LT |
3253 | |
3254 | /* IOC *must* NOT be in RESET state! */ | |
3255 | if (ioc->last_state == MPI_IOC_STATE_RESET) { | |
29dd3609 EM |
3256 | printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n", |
3257 | ioc->name, ioc->last_state ); | |
1da177e4 LT |
3258 | return -4; |
3259 | } | |
3260 | ||
3261 | pfacts = &ioc->pfacts[portnum]; | |
3262 | ||
3263 | /* Destination (reply area)... */ | |
3264 | reply_sz = sizeof(*pfacts); | |
3265 | memset(pfacts, 0, reply_sz); | |
3266 | ||
3267 | /* Request area (get_pfacts on the stack right now!) */ | |
3268 | req_sz = sizeof(get_pfacts); | |
3269 | memset(&get_pfacts, 0, req_sz); | |
3270 | ||
3271 | get_pfacts.Function = MPI_FUNCTION_PORT_FACTS; | |
3272 | get_pfacts.PortNumber = portnum; | |
3273 | /* Assert: All other get_pfacts fields are zero! */ | |
3274 | ||
436ace72 | 3275 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n", |
1da177e4 LT |
3276 | ioc->name, portnum)); |
3277 | ||
3278 | /* No non-zero fields in the get_pfacts request are greater than | |
3279 | * 1 byte in size, so we can just fire it off as is. | |
3280 | */ | |
3281 | ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts, | |
3282 | reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag); | |
3283 | if (ii != 0) | |
3284 | return ii; | |
3285 | ||
3286 | /* Did we get a valid reply? */ | |
3287 | ||
3288 | /* Now byte swap the necessary fields in the response. */ | |
3289 | pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext); | |
3290 | pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus); | |
3291 | pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo); | |
3292 | pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices); | |
3293 | pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID); | |
3294 | pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags); | |
3295 | pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers); | |
3296 | pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs); | |
3297 | pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets); | |
3298 | ||
793955f5 EM |
3299 | max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID : |
3300 | pfacts->MaxDevices; | |
3301 | ioc->devices_per_bus = (max_id > 255) ? 256 : max_id; | |
3302 | ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256; | |
3303 | ||
3304 | /* | |
3305 | * Place all the devices on channels | |
3306 | * | |
3307 | * (for debuging) | |
3308 | */ | |
3309 | if (mpt_channel_mapping) { | |
3310 | ioc->devices_per_bus = 1; | |
3311 | ioc->number_of_buses = (max_id > 255) ? 255 : max_id; | |
3312 | } | |
3313 | ||
1da177e4 LT |
3314 | return 0; |
3315 | } | |
3316 | ||
3317 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 3318 | /** |
1da177e4 LT |
3319 | * SendIocInit - Send IOCInit request to MPT adapter. |
3320 | * @ioc: Pointer to MPT_ADAPTER structure | |
3321 | * @sleepFlag: Specifies whether the process can sleep | |
3322 | * | |
3323 | * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state. | |
3324 | * | |
3325 | * Returns 0 for success, non-zero for failure. | |
3326 | */ | |
3327 | static int | |
3328 | SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) | |
3329 | { | |
3330 | IOCInit_t ioc_init; | |
3331 | MPIDefaultReply_t init_reply; | |
3332 | u32 state; | |
3333 | int r; | |
3334 | int count; | |
3335 | int cntdn; | |
3336 | ||
3337 | memset(&ioc_init, 0, sizeof(ioc_init)); | |
3338 | memset(&init_reply, 0, sizeof(init_reply)); | |
3339 | ||
3340 | ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER; | |
3341 | ioc_init.Function = MPI_FUNCTION_IOC_INIT; | |
3342 | ||
3343 | /* If we are in a recovery mode and we uploaded the FW image, | |
3344 | * then this pointer is not NULL. Skip the upload a second time. | |
3345 | * Set this flag if cached_fw set for either IOC. | |
3346 | */ | |
3347 | if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) | |
3348 | ioc->upload_fw = 1; | |
3349 | else | |
3350 | ioc->upload_fw = 0; | |
436ace72 | 3351 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n", |
1da177e4 LT |
3352 | ioc->name, ioc->upload_fw, ioc->facts.Flags)); |
3353 | ||
793955f5 EM |
3354 | ioc_init.MaxDevices = (U8)ioc->devices_per_bus; |
3355 | ioc_init.MaxBuses = (U8)ioc->number_of_buses; | |
2f187862 | 3356 | |
436ace72 | 3357 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n", |
82ffb671 CH |
3358 | ioc->name, ioc->facts.MsgVersion)); |
3359 | if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) { | |
3360 | // set MsgVersion and HeaderVersion host driver was built with | |
3361 | ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION); | |
3362 | ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION); | |
3363 | ||
3364 | if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) { | |
3365 | ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE; | |
3366 | } else if(mpt_host_page_alloc(ioc, &ioc_init)) | |
3367 | return -99; | |
3368 | } | |
1da177e4 LT |
3369 | ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */ |
3370 | ||
2f187862 | 3371 | if (ioc->sg_addr_size == sizeof(u64)) { |
1da177e4 LT |
3372 | /* Save the upper 32-bits of the request |
3373 | * (reply) and sense buffers. | |
3374 | */ | |
3375 | ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32)); | |
3376 | ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32)); | |
3377 | } else { | |
3378 | /* Force 32-bit addressing */ | |
3379 | ioc_init.HostMfaHighAddr = cpu_to_le32(0); | |
3380 | ioc_init.SenseBufferHighAddr = cpu_to_le32(0); | |
3381 | } | |
82ffb671 | 3382 | |
1da177e4 LT |
3383 | ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr; |
3384 | ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr; | |
82ffb671 CH |
3385 | ioc->facts.MaxDevices = ioc_init.MaxDevices; |
3386 | ioc->facts.MaxBuses = ioc_init.MaxBuses; | |
1da177e4 | 3387 | |
436ace72 | 3388 | dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n", |
1da177e4 LT |
3389 | ioc->name, &ioc_init)); |
3390 | ||
3391 | r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init, | |
3392 | sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag); | |
82ffb671 CH |
3393 | if (r != 0) { |
3394 | printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r); | |
1da177e4 | 3395 | return r; |
82ffb671 | 3396 | } |
1da177e4 LT |
3397 | |
3398 | /* No need to byte swap the multibyte fields in the reply | |
d9489fb6 | 3399 | * since we don't even look at its contents. |
1da177e4 LT |
3400 | */ |
3401 | ||
436ace72 | 3402 | dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n", |
1da177e4 | 3403 | ioc->name, &ioc_init)); |
c6678e0c CH |
3404 | |
3405 | if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) { | |
3406 | printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r); | |
1da177e4 | 3407 | return r; |
c6678e0c | 3408 | } |
1da177e4 LT |
3409 | |
3410 | /* YIKES! SUPER IMPORTANT!!! | |
3411 | * Poll IocState until _OPERATIONAL while IOC is doing | |
3412 | * LoopInit and TargetDiscovery! | |
3413 | */ | |
3414 | count = 0; | |
3415 | cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */ | |
3416 | state = mpt_GetIocState(ioc, 1); | |
3417 | while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) { | |
3418 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 3419 | msleep(1); |
1da177e4 LT |
3420 | } else { |
3421 | mdelay(1); | |
3422 | } | |
3423 | ||
3424 | if (!cntdn) { | |
3425 | printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n", | |
3426 | ioc->name, (int)((count+5)/HZ)); | |
3427 | return -9; | |
3428 | } | |
3429 | ||
3430 | state = mpt_GetIocState(ioc, 1); | |
3431 | count++; | |
3432 | } | |
29dd3609 | 3433 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n", |
1da177e4 LT |
3434 | ioc->name, count)); |
3435 | ||
ba856d32 | 3436 | ioc->aen_event_read_flag=0; |
1da177e4 LT |
3437 | return r; |
3438 | } | |
3439 | ||
3440 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 3441 | /** |
1da177e4 LT |
3442 | * SendPortEnable - Send PortEnable request to MPT adapter port. |
3443 | * @ioc: Pointer to MPT_ADAPTER structure | |
3444 | * @portnum: Port number to enable | |
3445 | * @sleepFlag: Specifies whether the process can sleep | |
3446 | * | |
3447 | * Send PortEnable to bring IOC to OPERATIONAL state. | |
3448 | * | |
3449 | * Returns 0 for success, non-zero for failure. | |
3450 | */ | |
3451 | static int | |
3452 | SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) | |
3453 | { | |
3454 | PortEnable_t port_enable; | |
3455 | MPIDefaultReply_t reply_buf; | |
82ffb671 | 3456 | int rc; |
1da177e4 LT |
3457 | int req_sz; |
3458 | int reply_sz; | |
3459 | ||
3460 | /* Destination... */ | |
3461 | reply_sz = sizeof(MPIDefaultReply_t); | |
3462 | memset(&reply_buf, 0, reply_sz); | |
3463 | ||
3464 | req_sz = sizeof(PortEnable_t); | |
3465 | memset(&port_enable, 0, req_sz); | |
3466 | ||
3467 | port_enable.Function = MPI_FUNCTION_PORT_ENABLE; | |
3468 | port_enable.PortNumber = portnum; | |
3469 | /* port_enable.ChainOffset = 0; */ | |
3470 | /* port_enable.MsgFlags = 0; */ | |
3471 | /* port_enable.MsgContext = 0; */ | |
3472 | ||
436ace72 | 3473 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n", |
1da177e4 LT |
3474 | ioc->name, portnum, &port_enable)); |
3475 | ||
3476 | /* RAID FW may take a long time to enable | |
3477 | */ | |
b506ade9 | 3478 | if (ioc->ir_firmware || ioc->bus_type == SAS) { |
432b4c8b ME |
3479 | rc = mpt_handshake_req_reply_wait(ioc, req_sz, |
3480 | (u32*)&port_enable, reply_sz, (u16*)&reply_buf, | |
3481 | 300 /*seconds*/, sleepFlag); | |
82ffb671 | 3482 | } else { |
432b4c8b ME |
3483 | rc = mpt_handshake_req_reply_wait(ioc, req_sz, |
3484 | (u32*)&port_enable, reply_sz, (u16*)&reply_buf, | |
3485 | 30 /*seconds*/, sleepFlag); | |
1da177e4 | 3486 | } |
82ffb671 | 3487 | return rc; |
1da177e4 LT |
3488 | } |
3489 | ||
d9489fb6 RD |
3490 | /** |
3491 | * mpt_alloc_fw_memory - allocate firmware memory | |
3492 | * @ioc: Pointer to MPT_ADAPTER structure | |
3493 | * @size: total FW bytes | |
3494 | * | |
3495 | * If memory has already been allocated, the same (cached) value | |
3496 | * is returned. | |
984621b4 | 3497 | * |
25985edc | 3498 | * Return 0 if successful, or non-zero for failure |
984621b4 PS |
3499 | **/ |
3500 | int | |
1da177e4 LT |
3501 | mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) |
3502 | { | |
984621b4 PS |
3503 | int rc; |
3504 | ||
3505 | if (ioc->cached_fw) { | |
3506 | rc = 0; /* use already allocated memory */ | |
3507 | goto out; | |
3508 | } | |
3509 | else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { | |
1da177e4 LT |
3510 | ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */ |
3511 | ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma; | |
984621b4 PS |
3512 | rc = 0; |
3513 | goto out; | |
3514 | } | |
3515 | ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma); | |
3516 | if (!ioc->cached_fw) { | |
3517 | printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n", | |
3518 | ioc->name); | |
3519 | rc = -1; | |
1da177e4 | 3520 | } else { |
984621b4 PS |
3521 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n", |
3522 | ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size)); | |
3523 | ioc->alloc_total += size; | |
3524 | rc = 0; | |
1da177e4 | 3525 | } |
984621b4 PS |
3526 | out: |
3527 | return rc; | |
1da177e4 | 3528 | } |
984621b4 | 3529 | |
d9489fb6 RD |
3530 | /** |
3531 | * mpt_free_fw_memory - free firmware memory | |
3532 | * @ioc: Pointer to MPT_ADAPTER structure | |
3533 | * | |
3534 | * If alt_img is NULL, delete from ioc structure. | |
3535 | * Else, delete a secondary image in same format. | |
984621b4 | 3536 | **/ |
1da177e4 LT |
3537 | void |
3538 | mpt_free_fw_memory(MPT_ADAPTER *ioc) | |
3539 | { | |
3540 | int sz; | |
3541 | ||
984621b4 PS |
3542 | if (!ioc->cached_fw) |
3543 | return; | |
3544 | ||
1da177e4 | 3545 | sz = ioc->facts.FWImageSize; |
984621b4 PS |
3546 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n", |
3547 | ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); | |
29dd3609 | 3548 | pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma); |
984621b4 | 3549 | ioc->alloc_total -= sz; |
1da177e4 | 3550 | ioc->cached_fw = NULL; |
1da177e4 LT |
3551 | } |
3552 | ||
1da177e4 | 3553 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
d9489fb6 | 3554 | /** |
1da177e4 LT |
3555 | * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port. |
3556 | * @ioc: Pointer to MPT_ADAPTER structure | |
3557 | * @sleepFlag: Specifies whether the process can sleep | |
3558 | * | |
3559 | * Returns 0 for success, >0 for handshake failure | |
3560 | * <0 for fw upload failure. | |
3561 | * | |
3562 | * Remark: If bound IOC and a successful FWUpload was performed | |
3563 | * on the bound IOC, the second image is discarded | |
3564 | * and memory is free'd. Both channels must upload to prevent | |
3565 | * IOC from running in degraded mode. | |
3566 | */ | |
3567 | static int | |
3568 | mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) | |
3569 | { | |
1da177e4 LT |
3570 | u8 reply[sizeof(FWUploadReply_t)]; |
3571 | FWUpload_t *prequest; | |
3572 | FWUploadReply_t *preply; | |
3573 | FWUploadTCSGE_t *ptcsge; | |
1da177e4 LT |
3574 | u32 flagsLength; |
3575 | int ii, sz, reply_sz; | |
3576 | int cmdStatus; | |
14d0f0b0 | 3577 | int request_size; |
1da177e4 LT |
3578 | /* If the image size is 0, we are done. |
3579 | */ | |
3580 | if ((sz = ioc->facts.FWImageSize) == 0) | |
3581 | return 0; | |
3582 | ||
984621b4 PS |
3583 | if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0) |
3584 | return -ENOMEM; | |
1da177e4 | 3585 | |
29dd3609 EM |
3586 | dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n", |
3587 | ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); | |
c6678e0c | 3588 | |
bc6e089a EM |
3589 | prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) : |
3590 | kzalloc(ioc->req_sz, GFP_KERNEL); | |
3591 | if (!prequest) { | |
3592 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed " | |
3593 | "while allocating memory \n", ioc->name)); | |
3594 | mpt_free_fw_memory(ioc); | |
3595 | return -ENOMEM; | |
3596 | } | |
1da177e4 | 3597 | |
bc6e089a | 3598 | preply = (FWUploadReply_t *)&reply; |
1da177e4 LT |
3599 | |
3600 | reply_sz = sizeof(reply); | |
3601 | memset(preply, 0, reply_sz); | |
3602 | ||
3603 | prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM; | |
3604 | prequest->Function = MPI_FUNCTION_FW_UPLOAD; | |
3605 | ||
3606 | ptcsge = (FWUploadTCSGE_t *) &prequest->SGL; | |
3607 | ptcsge->DetailsLength = 12; | |
3608 | ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; | |
3609 | ptcsge->ImageSize = cpu_to_le32(sz); | |
bc6e089a | 3610 | ptcsge++; |
1da177e4 | 3611 | |
1da177e4 | 3612 | flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz; |
14d0f0b0 KD |
3613 | ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma); |
3614 | request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) + | |
3615 | ioc->SGE_size; | |
3616 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload " | |
3617 | " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest, | |
3618 | ioc->facts.FWImageSize, request_size)); | |
29dd3609 | 3619 | DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest); |
1da177e4 | 3620 | |
14d0f0b0 KD |
3621 | ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest, |
3622 | reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag); | |
1da177e4 | 3623 | |
2f187862 KD |
3624 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed " |
3625 | "rc=%x \n", ioc->name, ii)); | |
1da177e4 LT |
3626 | |
3627 | cmdStatus = -EFAULT; | |
3628 | if (ii == 0) { | |
3629 | /* Handshake transfer was complete and successful. | |
3630 | * Check the Reply Frame. | |
3631 | */ | |
2f187862 KD |
3632 | int status; |
3633 | status = le16_to_cpu(preply->IOCStatus) & | |
3634 | MPI_IOCSTATUS_MASK; | |
3635 | if (status == MPI_IOCSTATUS_SUCCESS && | |
3636 | ioc->facts.FWImageSize == | |
3637 | le32_to_cpu(preply->ActualImageSize)) | |
1da177e4 | 3638 | cmdStatus = 0; |
1da177e4 | 3639 | } |
436ace72 | 3640 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n", |
1da177e4 LT |
3641 | ioc->name, cmdStatus)); |
3642 | ||
c6678e0c | 3643 | |
1da177e4 | 3644 | if (cmdStatus) { |
2f187862 KD |
3645 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, " |
3646 | "freeing image \n", ioc->name)); | |
1da177e4 LT |
3647 | mpt_free_fw_memory(ioc); |
3648 | } | |
bc6e089a | 3649 | kfree(prequest); |
1da177e4 LT |
3650 | |
3651 | return cmdStatus; | |
3652 | } | |
3653 | ||
3654 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 3655 | /** |
1da177e4 LT |
3656 | * mpt_downloadboot - DownloadBoot code |
3657 | * @ioc: Pointer to MPT_ADAPTER structure | |
d9489fb6 | 3658 | * @pFwHeader: Pointer to firmware header info |
1da177e4 LT |
3659 | * @sleepFlag: Specifies whether the process can sleep |
3660 | * | |
3661 | * FwDownloadBoot requires Programmed IO access. | |
3662 | * | |
3663 | * Returns 0 for success | |
3664 | * -1 FW Image size is 0 | |
3665 | * -2 No valid cached_fw Pointer | |
3666 | * <0 for fw upload failure. | |
3667 | */ | |
3668 | static int | |
82ffb671 | 3669 | mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) |
1da177e4 | 3670 | { |
1da177e4 LT |
3671 | MpiExtImageHeader_t *pExtImage; |
3672 | u32 fwSize; | |
3673 | u32 diag0val; | |
3674 | int count; | |
3675 | u32 *ptrFw; | |
3676 | u32 diagRwData; | |
3677 | u32 nextImage; | |
3678 | u32 load_addr; | |
3679 | u32 ioc_state=0; | |
3680 | ||
436ace72 | 3681 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n", |
82ffb671 | 3682 | ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader)); |
3fadc59d | 3683 | |
1da177e4 LT |
3684 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); |
3685 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); | |
3686 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); | |
3687 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); | |
3688 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); | |
3689 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); | |
3690 | ||
3691 | CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM)); | |
3692 | ||
3693 | /* wait 1 msec */ | |
3694 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 3695 | msleep(1); |
1da177e4 LT |
3696 | } else { |
3697 | mdelay (1); | |
3698 | } | |
3699 | ||
3700 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); | |
3701 | CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); | |
3702 | ||
3703 | for (count = 0; count < 30; count ++) { | |
3704 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); | |
3705 | if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { | |
436ace72 | 3706 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n", |
1da177e4 LT |
3707 | ioc->name, count)); |
3708 | break; | |
3709 | } | |
82ffb671 | 3710 | /* wait .1 sec */ |
1da177e4 | 3711 | if (sleepFlag == CAN_SLEEP) { |
d6be06c8 | 3712 | msleep (100); |
1da177e4 | 3713 | } else { |
82ffb671 | 3714 | mdelay (100); |
1da177e4 LT |
3715 | } |
3716 | } | |
3717 | ||
3718 | if ( count == 30 ) { | |
436ace72 | 3719 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! " |
82ffb671 | 3720 | "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n", |
1da177e4 LT |
3721 | ioc->name, diag0val)); |
3722 | return -3; | |
3723 | } | |
3724 | ||
3725 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); | |
3726 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); | |
3727 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); | |
3728 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); | |
3729 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); | |
3730 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); | |
3731 | ||
3732 | /* Set the DiagRwEn and Disable ARM bits */ | |
3733 | CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM)); | |
3734 | ||
1da177e4 LT |
3735 | fwSize = (pFwHeader->ImageSize + 3)/4; |
3736 | ptrFw = (u32 *) pFwHeader; | |
3737 | ||
3738 | /* Write the LoadStartAddress to the DiagRw Address Register | |
3739 | * using Programmed IO | |
3740 | */ | |
3fadc59d MED |
3741 | if (ioc->errata_flag_1064) |
3742 | pci_enable_io_access(ioc->pcidev); | |
3743 | ||
1da177e4 | 3744 | CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress); |
436ace72 | 3745 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n", |
1da177e4 LT |
3746 | ioc->name, pFwHeader->LoadStartAddress)); |
3747 | ||
436ace72 | 3748 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n", |
1da177e4 LT |
3749 | ioc->name, fwSize*4, ptrFw)); |
3750 | while (fwSize--) { | |
3751 | CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); | |
3752 | } | |
3753 | ||
3754 | nextImage = pFwHeader->NextImageHeaderOffset; | |
3755 | while (nextImage) { | |
3756 | pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage); | |
3757 | ||
3758 | load_addr = pExtImage->LoadStartAddress; | |
3759 | ||
3760 | fwSize = (pExtImage->ImageSize + 3) >> 2; | |
3761 | ptrFw = (u32 *)pExtImage; | |
3762 | ||
436ace72 | 3763 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n", |
c6678e0c | 3764 | ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr)); |
1da177e4 LT |
3765 | CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr); |
3766 | ||
3767 | while (fwSize--) { | |
3768 | CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); | |
3769 | } | |
3770 | nextImage = pExtImage->NextImageHeaderOffset; | |
3771 | } | |
3772 | ||
3773 | /* Write the IopResetVectorRegAddr */ | |
436ace72 | 3774 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr)); |
1da177e4 LT |
3775 | CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr); |
3776 | ||
3777 | /* Write the IopResetVectorValue */ | |
436ace72 | 3778 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue)); |
1da177e4 LT |
3779 | CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue); |
3780 | ||
3781 | /* Clear the internal flash bad bit - autoincrementing register, | |
3782 | * so must do two writes. | |
3783 | */ | |
a9b2937a | 3784 | if (ioc->bus_type == SPI) { |
82ffb671 CH |
3785 | /* |
3786 | * 1030 and 1035 H/W errata, workaround to access | |
3787 | * the ClearFlashBadSignatureBit | |
3788 | */ | |
3789 | CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); | |
3790 | diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData); | |
3791 | diagRwData |= 0x40000000; | |
3792 | CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); | |
3793 | CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData); | |
3794 | ||
3795 | } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ { | |
3796 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); | |
3797 | CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | | |
3798 | MPI_DIAG_CLEAR_FLASH_BAD_SIG); | |
3799 | ||
3800 | /* wait 1 msec */ | |
3801 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 3802 | msleep (1); |
82ffb671 CH |
3803 | } else { |
3804 | mdelay (1); | |
3805 | } | |
3806 | } | |
1da177e4 | 3807 | |
3fadc59d MED |
3808 | if (ioc->errata_flag_1064) |
3809 | pci_disable_io_access(ioc->pcidev); | |
3810 | ||
1da177e4 | 3811 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
436ace72 | 3812 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, " |
82ffb671 | 3813 | "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n", |
1da177e4 | 3814 | ioc->name, diag0val)); |
82ffb671 | 3815 | diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE); |
436ace72 | 3816 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n", |
1da177e4 LT |
3817 | ioc->name, diag0val)); |
3818 | CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); | |
3819 | ||
3820 | /* Write 0xFF to reset the sequencer */ | |
3821 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); | |
3822 | ||
82ffb671 CH |
3823 | if (ioc->bus_type == SAS) { |
3824 | ioc_state = mpt_GetIocState(ioc, 0); | |
3825 | if ( (GetIocFacts(ioc, sleepFlag, | |
3826 | MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) { | |
436ace72 | 3827 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n", |
82ffb671 CH |
3828 | ioc->name, ioc_state)); |
3829 | return -EFAULT; | |
3830 | } | |
3831 | } | |
3832 | ||
1da177e4 LT |
3833 | for (count=0; count<HZ*20; count++) { |
3834 | if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) { | |
436ace72 PS |
3835 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
3836 | "downloadboot successful! (count=%d) IocState=%x\n", | |
3837 | ioc->name, count, ioc_state)); | |
82ffb671 CH |
3838 | if (ioc->bus_type == SAS) { |
3839 | return 0; | |
3840 | } | |
1da177e4 | 3841 | if ((SendIocInit(ioc, sleepFlag)) != 0) { |
436ace72 PS |
3842 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
3843 | "downloadboot: SendIocInit failed\n", | |
1da177e4 LT |
3844 | ioc->name)); |
3845 | return -EFAULT; | |
3846 | } | |
436ace72 PS |
3847 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
3848 | "downloadboot: SendIocInit successful\n", | |
1da177e4 LT |
3849 | ioc->name)); |
3850 | return 0; | |
3851 | } | |
3852 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 3853 | msleep (10); |
1da177e4 LT |
3854 | } else { |
3855 | mdelay (10); | |
3856 | } | |
3857 | } | |
436ace72 PS |
3858 | ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
3859 | "downloadboot failed! IocState=%x\n",ioc->name, ioc_state)); | |
1da177e4 LT |
3860 | return -EFAULT; |
3861 | } | |
3862 | ||
3863 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 3864 | /** |
1da177e4 LT |
3865 | * KickStart - Perform hard reset of MPT adapter. |
3866 | * @ioc: Pointer to MPT_ADAPTER structure | |
3867 | * @force: Force hard reset | |
3868 | * @sleepFlag: Specifies whether the process can sleep | |
3869 | * | |
3870 | * This routine places MPT adapter in diagnostic mode via the | |
3871 | * WriteSequence register, and then performs a hard reset of adapter | |
3872 | * via the Diagnostic register. | |
3873 | * | |
3874 | * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread) | |
3875 | * or NO_SLEEP (interrupt thread, use mdelay) | |
3876 | * force - 1 if doorbell active, board fault state | |
3877 | * board operational, IOC_RECOVERY or | |
3878 | * IOC_BRINGUP and there is an alt_ioc. | |
3879 | * 0 else | |
3880 | * | |
3881 | * Returns: | |
c6678e0c CH |
3882 | * 1 - hard reset, READY |
3883 | * 0 - no reset due to History bit, READY | |
3884 | * -1 - no reset due to History bit but not READY | |
1da177e4 LT |
3885 | * OR reset but failed to come READY |
3886 | * -2 - no reset, could not enter DIAG mode | |
3887 | * -3 - reset but bad FW bit | |
3888 | */ | |
3889 | static int | |
3890 | KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) | |
3891 | { | |
3892 | int hard_reset_done = 0; | |
3893 | u32 ioc_state=0; | |
3894 | int cnt,cntdn; | |
3895 | ||
29dd3609 | 3896 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name)); |
a9b2937a | 3897 | if (ioc->bus_type == SPI) { |
1da177e4 LT |
3898 | /* Always issue a Msg Unit Reset first. This will clear some |
3899 | * SCSI bus hang conditions. | |
3900 | */ | |
3901 | SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); | |
3902 | ||
3903 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 3904 | msleep (1000); |
1da177e4 LT |
3905 | } else { |
3906 | mdelay (1000); | |
3907 | } | |
3908 | } | |
3909 | ||
3910 | hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag); | |
3911 | if (hard_reset_done < 0) | |
3912 | return hard_reset_done; | |
3913 | ||
436ace72 | 3914 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n", |
29dd3609 | 3915 | ioc->name)); |
1da177e4 LT |
3916 | |
3917 | cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */ | |
3918 | for (cnt=0; cnt<cntdn; cnt++) { | |
3919 | ioc_state = mpt_GetIocState(ioc, 1); | |
3920 | if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) { | |
436ace72 | 3921 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n", |
1da177e4 LT |
3922 | ioc->name, cnt)); |
3923 | return hard_reset_done; | |
3924 | } | |
3925 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 3926 | msleep (10); |
1da177e4 LT |
3927 | } else { |
3928 | mdelay (10); | |
3929 | } | |
3930 | } | |
3931 | ||
29dd3609 EM |
3932 | dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n", |
3933 | ioc->name, mpt_GetIocState(ioc, 0))); | |
1da177e4 LT |
3934 | return -1; |
3935 | } | |
3936 | ||
3937 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 3938 | /** |
1da177e4 LT |
3939 | * mpt_diag_reset - Perform hard reset of the adapter. |
3940 | * @ioc: Pointer to MPT_ADAPTER structure | |
3941 | * @ignore: Set if to honor and clear to ignore | |
3942 | * the reset history bit | |
d9489fb6 | 3943 | * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread, |
1da177e4 LT |
3944 | * else set to NO_SLEEP (use mdelay instead) |
3945 | * | |
3946 | * This routine places the adapter in diagnostic mode via the | |
3947 | * WriteSequence register and then performs a hard reset of adapter | |
3948 | * via the Diagnostic register. Adapter should be in ready state | |
3949 | * upon successful completion. | |
3950 | * | |
3951 | * Returns: 1 hard reset successful | |
3952 | * 0 no reset performed because reset history bit set | |
3953 | * -2 enabling diagnostic mode failed | |
3954 | * -3 diagnostic reset failed | |
3955 | */ | |
3956 | static int | |
3957 | mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) | |
3958 | { | |
3959 | u32 diag0val; | |
3960 | u32 doorbell; | |
3961 | int hard_reset_done = 0; | |
3962 | int count = 0; | |
1da177e4 | 3963 | u32 diag1val = 0; |
984621b4 | 3964 | MpiFwHeader_t *cached_fw; /* Pointer to FW */ |
d1306917 | 3965 | u8 cb_idx; |
1da177e4 | 3966 | |
cd2c6191 EM |
3967 | /* Clear any existing interrupts */ |
3968 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
3969 | ||
87cf8986 | 3970 | if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) { |
2f187862 KD |
3971 | |
3972 | if (!ignore) | |
3973 | return 0; | |
3974 | ||
436ace72 | 3975 | drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset " |
cadbd4a5 | 3976 | "address=%p\n", ioc->name, __func__, |
87cf8986 EM |
3977 | &ioc->chip->Doorbell, &ioc->chip->Reset_1078)); |
3978 | CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07); | |
3979 | if (sleepFlag == CAN_SLEEP) | |
3980 | msleep(1); | |
3981 | else | |
3982 | mdelay(1); | |
3983 | ||
d1306917 KD |
3984 | /* |
3985 | * Call each currently registered protocol IOC reset handler | |
3986 | * with pre-reset indication. | |
3987 | * NOTE: If we're doing _IOC_BRINGUP, there can be no | |
3988 | * MptResetHandlers[] registered yet. | |
3989 | */ | |
3990 | for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { | |
3991 | if (MptResetHandlers[cb_idx]) | |
3992 | (*(MptResetHandlers[cb_idx]))(ioc, | |
3993 | MPT_IOC_PRE_RESET); | |
3994 | } | |
3995 | ||
87cf8986 EM |
3996 | for (count = 0; count < 60; count ++) { |
3997 | doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); | |
3998 | doorbell &= MPI_IOC_STATE_MASK; | |
3999 | ||
436ace72 | 4000 | drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
87cf8986 EM |
4001 | "looking for READY STATE: doorbell=%x" |
4002 | " count=%d\n", | |
4003 | ioc->name, doorbell, count)); | |
2f187862 | 4004 | |
87cf8986 | 4005 | if (doorbell == MPI_IOC_STATE_READY) { |
cd2c6191 | 4006 | return 1; |
87cf8986 EM |
4007 | } |
4008 | ||
4009 | /* wait 1 sec */ | |
4010 | if (sleepFlag == CAN_SLEEP) | |
4011 | msleep(1000); | |
4012 | else | |
4013 | mdelay(1000); | |
4014 | } | |
4015 | return -1; | |
4016 | } | |
4017 | ||
1da177e4 LT |
4018 | /* Use "Diagnostic reset" method! (only thing available!) */ |
4019 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); | |
4020 | ||
436ace72 PS |
4021 | if (ioc->debug_level & MPT_DEBUG) { |
4022 | if (ioc->alt_ioc) | |
4023 | diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); | |
4024 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n", | |
1da177e4 | 4025 | ioc->name, diag0val, diag1val)); |
436ace72 | 4026 | } |
1da177e4 LT |
4027 | |
4028 | /* Do the reset if we are told to ignore the reset history | |
4029 | * or if the reset history is 0 | |
4030 | */ | |
4031 | if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) { | |
4032 | while ((diag0val & MPI_DIAG_DRWE) == 0) { | |
4033 | /* Write magic sequence to WriteSequence register | |
4034 | * Loop until in diagnostic mode | |
4035 | */ | |
4036 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); | |
4037 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); | |
4038 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); | |
4039 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); | |
4040 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); | |
4041 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); | |
4042 | ||
4043 | /* wait 100 msec */ | |
4044 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 4045 | msleep (100); |
1da177e4 LT |
4046 | } else { |
4047 | mdelay (100); | |
4048 | } | |
4049 | ||
4050 | count++; | |
4051 | if (count > 20) { | |
4052 | printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", | |
4053 | ioc->name, diag0val); | |
4054 | return -2; | |
4055 | ||
4056 | } | |
4057 | ||
4058 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); | |
4059 | ||
436ace72 | 4060 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n", |
1da177e4 LT |
4061 | ioc->name, diag0val)); |
4062 | } | |
4063 | ||
436ace72 PS |
4064 | if (ioc->debug_level & MPT_DEBUG) { |
4065 | if (ioc->alt_ioc) | |
4066 | diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); | |
4067 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n", | |
1da177e4 | 4068 | ioc->name, diag0val, diag1val)); |
436ace72 | 4069 | } |
1da177e4 LT |
4070 | /* |
4071 | * Disable the ARM (Bug fix) | |
4072 | * | |
4073 | */ | |
4074 | CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM); | |
c6678e0c | 4075 | mdelay(1); |
1da177e4 LT |
4076 | |
4077 | /* | |
4078 | * Now hit the reset bit in the Diagnostic register | |
4079 | * (THE BIG HAMMER!) (Clears DRWE bit). | |
4080 | */ | |
4081 | CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); | |
4082 | hard_reset_done = 1; | |
436ace72 | 4083 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n", |
1da177e4 LT |
4084 | ioc->name)); |
4085 | ||
4086 | /* | |
4087 | * Call each currently registered protocol IOC reset handler | |
4088 | * with pre-reset indication. | |
4089 | * NOTE: If we're doing _IOC_BRINGUP, there can be no | |
4090 | * MptResetHandlers[] registered yet. | |
4091 | */ | |
d1306917 KD |
4092 | for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
4093 | if (MptResetHandlers[cb_idx]) { | |
4094 | mpt_signal_reset(cb_idx, | |
4095 | ioc, MPT_IOC_PRE_RESET); | |
4096 | if (ioc->alt_ioc) { | |
4097 | mpt_signal_reset(cb_idx, | |
4098 | ioc->alt_ioc, MPT_IOC_PRE_RESET); | |
1da177e4 LT |
4099 | } |
4100 | } | |
1da177e4 LT |
4101 | } |
4102 | ||
0ccdb007 | 4103 | if (ioc->cached_fw) |
984621b4 | 4104 | cached_fw = (MpiFwHeader_t *)ioc->cached_fw; |
0ccdb007 | 4105 | else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) |
984621b4 PS |
4106 | cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw; |
4107 | else | |
4108 | cached_fw = NULL; | |
4109 | if (cached_fw) { | |
1da177e4 LT |
4110 | /* If the DownloadBoot operation fails, the |
4111 | * IOC will be left unusable. This is a fatal error | |
4112 | * case. _diag_reset will return < 0 | |
4113 | */ | |
4114 | for (count = 0; count < 30; count ++) { | |
984621b4 | 4115 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); |
1da177e4 LT |
4116 | if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { |
4117 | break; | |
4118 | } | |
4119 | ||
436ace72 | 4120 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n", |
984621b4 | 4121 | ioc->name, diag0val, count)); |
1da177e4 LT |
4122 | /* wait 1 sec */ |
4123 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 4124 | msleep (1000); |
1da177e4 LT |
4125 | } else { |
4126 | mdelay (1000); | |
4127 | } | |
4128 | } | |
984621b4 | 4129 | if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) { |
29dd3609 EM |
4130 | printk(MYIOC_s_WARN_FMT |
4131 | "firmware downloadboot failure (%d)!\n", ioc->name, count); | |
1da177e4 LT |
4132 | } |
4133 | ||
4134 | } else { | |
4135 | /* Wait for FW to reload and for board | |
4136 | * to go to the READY state. | |
4137 | * Maximum wait is 60 seconds. | |
4138 | * If fail, no error will check again | |
4139 | * with calling program. | |
4140 | */ | |
4141 | for (count = 0; count < 60; count ++) { | |
4142 | doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); | |
4143 | doorbell &= MPI_IOC_STATE_MASK; | |
4144 | ||
2f187862 KD |
4145 | drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
4146 | "looking for READY STATE: doorbell=%x" | |
4147 | " count=%d\n", ioc->name, doorbell, count)); | |
4148 | ||
1da177e4 LT |
4149 | if (doorbell == MPI_IOC_STATE_READY) { |
4150 | break; | |
4151 | } | |
4152 | ||
4153 | /* wait 1 sec */ | |
4154 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 4155 | msleep (1000); |
1da177e4 LT |
4156 | } else { |
4157 | mdelay (1000); | |
4158 | } | |
4159 | } | |
2f187862 KD |
4160 | |
4161 | if (doorbell != MPI_IOC_STATE_READY) | |
4162 | printk(MYIOC_s_ERR_FMT "Failed to come READY " | |
4163 | "after reset! IocState=%x", ioc->name, | |
4164 | doorbell); | |
1da177e4 LT |
4165 | } |
4166 | } | |
4167 | ||
4168 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); | |
436ace72 PS |
4169 | if (ioc->debug_level & MPT_DEBUG) { |
4170 | if (ioc->alt_ioc) | |
4171 | diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); | |
4172 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n", | |
4173 | ioc->name, diag0val, diag1val)); | |
4174 | } | |
1da177e4 LT |
4175 | |
4176 | /* Clear RESET_HISTORY bit! Place board in the | |
4177 | * diagnostic mode to update the diag register. | |
4178 | */ | |
4179 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); | |
4180 | count = 0; | |
4181 | while ((diag0val & MPI_DIAG_DRWE) == 0) { | |
4182 | /* Write magic sequence to WriteSequence register | |
4183 | * Loop until in diagnostic mode | |
4184 | */ | |
4185 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); | |
4186 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); | |
4187 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); | |
4188 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); | |
4189 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); | |
4190 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); | |
4191 | ||
4192 | /* wait 100 msec */ | |
4193 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 4194 | msleep (100); |
1da177e4 LT |
4195 | } else { |
4196 | mdelay (100); | |
4197 | } | |
4198 | ||
4199 | count++; | |
4200 | if (count > 20) { | |
4201 | printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", | |
4202 | ioc->name, diag0val); | |
4203 | break; | |
4204 | } | |
4205 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); | |
4206 | } | |
4207 | diag0val &= ~MPI_DIAG_RESET_HISTORY; | |
4208 | CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); | |
4209 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); | |
4210 | if (diag0val & MPI_DIAG_RESET_HISTORY) { | |
4211 | printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n", | |
4212 | ioc->name); | |
4213 | } | |
4214 | ||
4215 | /* Disable Diagnostic Mode | |
4216 | */ | |
4217 | CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF); | |
4218 | ||
4219 | /* Check FW reload status flags. | |
4220 | */ | |
4221 | diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); | |
4222 | if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) { | |
4223 | printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n", | |
4224 | ioc->name, diag0val); | |
4225 | return -3; | |
4226 | } | |
4227 | ||
436ace72 PS |
4228 | if (ioc->debug_level & MPT_DEBUG) { |
4229 | if (ioc->alt_ioc) | |
4230 | diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); | |
4231 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n", | |
1da177e4 | 4232 | ioc->name, diag0val, diag1val)); |
436ace72 | 4233 | } |
1da177e4 LT |
4234 | |
4235 | /* | |
4236 | * Reset flag that says we've enabled event notification | |
4237 | */ | |
4238 | ioc->facts.EventState = 0; | |
4239 | ||
4240 | if (ioc->alt_ioc) | |
4241 | ioc->alt_ioc->facts.EventState = 0; | |
4242 | ||
4243 | return hard_reset_done; | |
4244 | } | |
4245 | ||
4246 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 4247 | /** |
1da177e4 LT |
4248 | * SendIocReset - Send IOCReset request to MPT adapter. |
4249 | * @ioc: Pointer to MPT_ADAPTER structure | |
4250 | * @reset_type: reset type, expected values are | |
4251 | * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET | |
d9489fb6 | 4252 | * @sleepFlag: Specifies whether the process can sleep |
1da177e4 LT |
4253 | * |
4254 | * Send IOCReset request to the MPT adapter. | |
4255 | * | |
4256 | * Returns 0 for success, non-zero for failure. | |
4257 | */ | |
4258 | static int | |
4259 | SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag) | |
4260 | { | |
4261 | int r; | |
4262 | u32 state; | |
4263 | int cntdn, count; | |
4264 | ||
436ace72 | 4265 | drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n", |
1da177e4 LT |
4266 | ioc->name, reset_type)); |
4267 | CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT); | |
4268 | if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) | |
4269 | return r; | |
4270 | ||
4271 | /* FW ACK'd request, wait for READY state | |
4272 | */ | |
4273 | count = 0; | |
4274 | cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */ | |
4275 | ||
4276 | while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { | |
4277 | cntdn--; | |
4278 | count++; | |
4279 | if (!cntdn) { | |
4280 | if (sleepFlag != CAN_SLEEP) | |
4281 | count *= 10; | |
4282 | ||
2f187862 KD |
4283 | printk(MYIOC_s_ERR_FMT |
4284 | "Wait IOC_READY state (0x%x) timeout(%d)!\n", | |
4285 | ioc->name, state, (int)((count+5)/HZ)); | |
1da177e4 LT |
4286 | return -ETIME; |
4287 | } | |
4288 | ||
4289 | if (sleepFlag == CAN_SLEEP) { | |
d6be06c8 | 4290 | msleep(1); |
1da177e4 LT |
4291 | } else { |
4292 | mdelay (1); /* 1 msec delay */ | |
4293 | } | |
4294 | } | |
4295 | ||
4296 | /* TODO! | |
4297 | * Cleanup all event stuff for this IOC; re-issue EventNotification | |
4298 | * request if needed. | |
4299 | */ | |
4300 | if (ioc->facts.Function) | |
4301 | ioc->facts.EventState = 0; | |
4302 | ||
4303 | return 0; | |
4304 | } | |
4305 | ||
4306 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 RD |
4307 | /** |
4308 | * initChainBuffers - Allocate memory for and initialize chain buffers | |
4309 | * @ioc: Pointer to MPT_ADAPTER structure | |
4310 | * | |
4311 | * Allocates memory for and initializes chain buffers, | |
4312 | * chain buffer control arrays and spinlock. | |
1da177e4 LT |
4313 | */ |
4314 | static int | |
4315 | initChainBuffers(MPT_ADAPTER *ioc) | |
4316 | { | |
4317 | u8 *mem; | |
4318 | int sz, ii, num_chain; | |
4319 | int scale, num_sge, numSGE; | |
4320 | ||
4321 | /* ReqToChain size must equal the req_depth | |
4322 | * index = req_idx | |
4323 | */ | |
4324 | if (ioc->ReqToChain == NULL) { | |
4325 | sz = ioc->req_depth * sizeof(int); | |
4326 | mem = kmalloc(sz, GFP_ATOMIC); | |
4327 | if (mem == NULL) | |
4328 | return -1; | |
4329 | ||
4330 | ioc->ReqToChain = (int *) mem; | |
436ace72 | 4331 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n", |
1da177e4 LT |
4332 | ioc->name, mem, sz)); |
4333 | mem = kmalloc(sz, GFP_ATOMIC); | |
4334 | if (mem == NULL) | |
4335 | return -1; | |
4336 | ||
4337 | ioc->RequestNB = (int *) mem; | |
436ace72 | 4338 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n", |
1da177e4 LT |
4339 | ioc->name, mem, sz)); |
4340 | } | |
4341 | for (ii = 0; ii < ioc->req_depth; ii++) { | |
4342 | ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN; | |
4343 | } | |
4344 | ||
4345 | /* ChainToChain size must equal the total number | |
4346 | * of chain buffers to be allocated. | |
4347 | * index = chain_idx | |
4348 | * | |
4349 | * Calculate the number of chain buffers needed(plus 1) per I/O | |
59c51591 | 4350 | * then multiply the maximum number of simultaneous cmds |
1da177e4 LT |
4351 | * |
4352 | * num_sge = num sge in request frame + last chain buffer | |
4353 | * scale = num sge per chain buffer if no chain element | |
4354 | */ | |
14d0f0b0 KD |
4355 | scale = ioc->req_sz / ioc->SGE_size; |
4356 | if (ioc->sg_addr_size == sizeof(u64)) | |
4357 | num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size; | |
1da177e4 | 4358 | else |
14d0f0b0 | 4359 | num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size; |
1da177e4 | 4360 | |
14d0f0b0 | 4361 | if (ioc->sg_addr_size == sizeof(u64)) { |
1da177e4 | 4362 | numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale + |
14d0f0b0 | 4363 | (ioc->req_sz - 60) / ioc->SGE_size; |
1da177e4 | 4364 | } else { |
14d0f0b0 KD |
4365 | numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + |
4366 | scale + (ioc->req_sz - 64) / ioc->SGE_size; | |
1da177e4 | 4367 | } |
436ace72 | 4368 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n", |
1da177e4 LT |
4369 | ioc->name, num_sge, numSGE)); |
4370 | ||
2f187862 KD |
4371 | if (ioc->bus_type == FC) { |
4372 | if (numSGE > MPT_SCSI_FC_SG_DEPTH) | |
4373 | numSGE = MPT_SCSI_FC_SG_DEPTH; | |
4374 | } else { | |
4375 | if (numSGE > MPT_SCSI_SG_DEPTH) | |
4376 | numSGE = MPT_SCSI_SG_DEPTH; | |
4377 | } | |
1da177e4 LT |
4378 | |
4379 | num_chain = 1; | |
4380 | while (numSGE - num_sge > 0) { | |
4381 | num_chain++; | |
4382 | num_sge += (scale - 1); | |
4383 | } | |
4384 | num_chain++; | |
4385 | ||
436ace72 | 4386 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n", |
1da177e4 LT |
4387 | ioc->name, numSGE, num_sge, num_chain)); |
4388 | ||
a9b2937a | 4389 | if (ioc->bus_type == SPI) |
1da177e4 | 4390 | num_chain *= MPT_SCSI_CAN_QUEUE; |
f1053a7c AG |
4391 | else if (ioc->bus_type == SAS) |
4392 | num_chain *= MPT_SAS_CAN_QUEUE; | |
1da177e4 LT |
4393 | else |
4394 | num_chain *= MPT_FC_CAN_QUEUE; | |
4395 | ||
4396 | ioc->num_chain = num_chain; | |
4397 | ||
4398 | sz = num_chain * sizeof(int); | |
4399 | if (ioc->ChainToChain == NULL) { | |
4400 | mem = kmalloc(sz, GFP_ATOMIC); | |
4401 | if (mem == NULL) | |
4402 | return -1; | |
4403 | ||
4404 | ioc->ChainToChain = (int *) mem; | |
436ace72 | 4405 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n", |
1da177e4 LT |
4406 | ioc->name, mem, sz)); |
4407 | } else { | |
4408 | mem = (u8 *) ioc->ChainToChain; | |
4409 | } | |
4410 | memset(mem, 0xFF, sz); | |
4411 | return num_chain; | |
4412 | } | |
4413 | ||
4414 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 4415 | /** |
1da177e4 LT |
4416 | * PrimeIocFifos - Initialize IOC request and reply FIFOs. |
4417 | * @ioc: Pointer to MPT_ADAPTER structure | |
4418 | * | |
4419 | * This routine allocates memory for the MPT reply and request frame | |
4420 | * pools (if necessary), and primes the IOC reply FIFO with | |
4421 | * reply frames. | |
4422 | * | |
4423 | * Returns 0 for success, non-zero for failure. | |
4424 | */ | |
4425 | static int | |
4426 | PrimeIocFifos(MPT_ADAPTER *ioc) | |
4427 | { | |
4428 | MPT_FRAME_HDR *mf; | |
4429 | unsigned long flags; | |
4430 | dma_addr_t alloc_dma; | |
4431 | u8 *mem; | |
4432 | int i, reply_sz, sz, total_size, num_chain; | |
14d0f0b0 KD |
4433 | u64 dma_mask; |
4434 | ||
4435 | dma_mask = 0; | |
1da177e4 LT |
4436 | |
4437 | /* Prime reply FIFO... */ | |
4438 | ||
4439 | if (ioc->reply_frames == NULL) { | |
4440 | if ( (num_chain = initChainBuffers(ioc)) < 0) | |
4441 | return -1; | |
14d0f0b0 KD |
4442 | /* |
4443 | * 1078 errata workaround for the 36GB limitation | |
4444 | */ | |
4445 | if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 && | |
8e20ce94 | 4446 | ioc->dma_mask > DMA_BIT_MASK(35)) { |
14d0f0b0 KD |
4447 | if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32)) |
4448 | && !pci_set_consistent_dma_mask(ioc->pcidev, | |
4449 | DMA_BIT_MASK(32))) { | |
8e20ce94 | 4450 | dma_mask = DMA_BIT_MASK(35); |
14d0f0b0 KD |
4451 | d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
4452 | "setting 35 bit addressing for " | |
4453 | "Request/Reply/Chain and Sense Buffers\n", | |
4454 | ioc->name)); | |
4455 | } else { | |
4456 | /*Reseting DMA mask to 64 bit*/ | |
4457 | pci_set_dma_mask(ioc->pcidev, | |
4458 | DMA_BIT_MASK(64)); | |
4459 | pci_set_consistent_dma_mask(ioc->pcidev, | |
4460 | DMA_BIT_MASK(64)); | |
4461 | ||
4462 | printk(MYIOC_s_ERR_FMT | |
4463 | "failed setting 35 bit addressing for " | |
4464 | "Request/Reply/Chain and Sense Buffers\n", | |
4465 | ioc->name); | |
4466 | return -1; | |
4467 | } | |
4468 | } | |
1da177e4 LT |
4469 | |
4470 | total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth); | |
436ace72 | 4471 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n", |
1da177e4 | 4472 | ioc->name, ioc->reply_sz, ioc->reply_depth)); |
436ace72 | 4473 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n", |
1da177e4 LT |
4474 | ioc->name, reply_sz, reply_sz)); |
4475 | ||
4476 | sz = (ioc->req_sz * ioc->req_depth); | |
436ace72 | 4477 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n", |
1da177e4 | 4478 | ioc->name, ioc->req_sz, ioc->req_depth)); |
436ace72 | 4479 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n", |
1da177e4 LT |
4480 | ioc->name, sz, sz)); |
4481 | total_size += sz; | |
4482 | ||
4483 | sz = num_chain * ioc->req_sz; /* chain buffer pool size */ | |
436ace72 | 4484 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n", |
1da177e4 | 4485 | ioc->name, ioc->req_sz, num_chain)); |
436ace72 | 4486 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n", |
1da177e4 LT |
4487 | ioc->name, sz, sz, num_chain)); |
4488 | ||
4489 | total_size += sz; | |
4490 | mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma); | |
4491 | if (mem == NULL) { | |
4492 | printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n", | |
4493 | ioc->name); | |
4494 | goto out_fail; | |
4495 | } | |
4496 | ||
436ace72 | 4497 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n", |
1da177e4 LT |
4498 | ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size)); |
4499 | ||
4500 | memset(mem, 0, total_size); | |
4501 | ioc->alloc_total += total_size; | |
4502 | ioc->alloc = mem; | |
4503 | ioc->alloc_dma = alloc_dma; | |
4504 | ioc->alloc_sz = total_size; | |
4505 | ioc->reply_frames = (MPT_FRAME_HDR *) mem; | |
4506 | ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); | |
4507 | ||
436ace72 | 4508 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", |
c6678e0c CH |
4509 | ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); |
4510 | ||
1da177e4 LT |
4511 | alloc_dma += reply_sz; |
4512 | mem += reply_sz; | |
4513 | ||
4514 | /* Request FIFO - WE manage this! */ | |
4515 | ||
4516 | ioc->req_frames = (MPT_FRAME_HDR *) mem; | |
4517 | ioc->req_frames_dma = alloc_dma; | |
4518 | ||
436ace72 | 4519 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n", |
1da177e4 LT |
4520 | ioc->name, mem, (void *)(ulong)alloc_dma)); |
4521 | ||
4522 | ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); | |
4523 | ||
4524 | #if defined(CONFIG_MTRR) && 0 | |
4525 | /* | |
4526 | * Enable Write Combining MTRR for IOC's memory region. | |
4527 | * (at least as much as we can; "size and base must be | |
4528 | * multiples of 4 kiB" | |
4529 | */ | |
4530 | ioc->mtrr_reg = mtrr_add(ioc->req_frames_dma, | |
4531 | sz, | |
4532 | MTRR_TYPE_WRCOMB, 1); | |
436ace72 | 4533 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MTRR region registered (base:size=%08x:%x)\n", |
1da177e4 LT |
4534 | ioc->name, ioc->req_frames_dma, sz)); |
4535 | #endif | |
4536 | ||
4537 | for (i = 0; i < ioc->req_depth; i++) { | |
4538 | alloc_dma += ioc->req_sz; | |
4539 | mem += ioc->req_sz; | |
4540 | } | |
4541 | ||
4542 | ioc->ChainBuffer = mem; | |
4543 | ioc->ChainBufferDMA = alloc_dma; | |
4544 | ||
436ace72 | 4545 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n", |
1da177e4 LT |
4546 | ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA)); |
4547 | ||
4548 | /* Initialize the free chain Q. | |
4549 | */ | |
4550 | ||
4551 | INIT_LIST_HEAD(&ioc->FreeChainQ); | |
4552 | ||
4553 | /* Post the chain buffers to the FreeChainQ. | |
4554 | */ | |
4555 | mem = (u8 *)ioc->ChainBuffer; | |
4556 | for (i=0; i < num_chain; i++) { | |
4557 | mf = (MPT_FRAME_HDR *) mem; | |
4558 | list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ); | |
4559 | mem += ioc->req_sz; | |
4560 | } | |
4561 | ||
4562 | /* Initialize Request frames linked list | |
4563 | */ | |
4564 | alloc_dma = ioc->req_frames_dma; | |
4565 | mem = (u8 *) ioc->req_frames; | |
4566 | ||
4567 | spin_lock_irqsave(&ioc->FreeQlock, flags); | |
4568 | INIT_LIST_HEAD(&ioc->FreeQ); | |
4569 | for (i = 0; i < ioc->req_depth; i++) { | |
4570 | mf = (MPT_FRAME_HDR *) mem; | |
4571 | ||
4572 | /* Queue REQUESTs *internally*! */ | |
4573 | list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); | |
4574 | ||
4575 | mem += ioc->req_sz; | |
4576 | } | |
4577 | spin_unlock_irqrestore(&ioc->FreeQlock, flags); | |
4578 | ||
4579 | sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); | |
4580 | ioc->sense_buf_pool = | |
4581 | pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma); | |
4582 | if (ioc->sense_buf_pool == NULL) { | |
4583 | printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n", | |
4584 | ioc->name); | |
4585 | goto out_fail; | |
4586 | } | |
4587 | ||
4588 | ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF); | |
4589 | ioc->alloc_total += sz; | |
436ace72 | 4590 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n", |
1da177e4 LT |
4591 | ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma)); |
4592 | ||
4593 | } | |
4594 | ||
4595 | /* Post Reply frames to FIFO | |
4596 | */ | |
4597 | alloc_dma = ioc->alloc_dma; | |
436ace72 | 4598 | dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", |
1da177e4 LT |
4599 | ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); |
4600 | ||
4601 | for (i = 0; i < ioc->reply_depth; i++) { | |
4602 | /* Write each address to the IOC! */ | |
4603 | CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma); | |
4604 | alloc_dma += ioc->reply_sz; | |
4605 | } | |
4606 | ||
8e20ce94 | 4607 | if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev, |
14d0f0b0 KD |
4608 | ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev, |
4609 | ioc->dma_mask)) | |
4610 | d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
4611 | "restoring 64 bit addressing\n", ioc->name)); | |
4612 | ||
1da177e4 LT |
4613 | return 0; |
4614 | ||
4615 | out_fail: | |
2f187862 | 4616 | |
1da177e4 LT |
4617 | if (ioc->alloc != NULL) { |
4618 | sz = ioc->alloc_sz; | |
4619 | pci_free_consistent(ioc->pcidev, | |
4620 | sz, | |
4621 | ioc->alloc, ioc->alloc_dma); | |
4622 | ioc->reply_frames = NULL; | |
4623 | ioc->req_frames = NULL; | |
4624 | ioc->alloc_total -= sz; | |
4625 | } | |
4626 | if (ioc->sense_buf_pool != NULL) { | |
4627 | sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); | |
4628 | pci_free_consistent(ioc->pcidev, | |
4629 | sz, | |
4630 | ioc->sense_buf_pool, ioc->sense_buf_pool_dma); | |
4631 | ioc->sense_buf_pool = NULL; | |
4632 | } | |
14d0f0b0 | 4633 | |
8e20ce94 | 4634 | if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev, |
14d0f0b0 KD |
4635 | DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev, |
4636 | DMA_BIT_MASK(64))) | |
4637 | d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
4638 | "restoring 64 bit addressing\n", ioc->name)); | |
4639 | ||
1da177e4 LT |
4640 | return -1; |
4641 | } | |
4642 | ||
4643 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
4644 | /** | |
4645 | * mpt_handshake_req_reply_wait - Send MPT request to and receive reply | |
4646 | * from IOC via doorbell handshake method. | |
4647 | * @ioc: Pointer to MPT_ADAPTER structure | |
4648 | * @reqBytes: Size of the request in bytes | |
4649 | * @req: Pointer to MPT request frame | |
4650 | * @replyBytes: Expected size of the reply in bytes | |
4651 | * @u16reply: Pointer to area where reply should be written | |
4652 | * @maxwait: Max wait time for a reply (in seconds) | |
4653 | * @sleepFlag: Specifies whether the process can sleep | |
4654 | * | |
4655 | * NOTES: It is the callers responsibility to byte-swap fields in the | |
4656 | * request which are greater than 1 byte in size. It is also the | |
4657 | * callers responsibility to byte-swap response fields which are | |
4658 | * greater than 1 byte in size. | |
4659 | * | |
4660 | * Returns 0 for success, non-zero for failure. | |
4661 | */ | |
4662 | static int | |
4663 | mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req, | |
c6678e0c | 4664 | int replyBytes, u16 *u16reply, int maxwait, int sleepFlag) |
1da177e4 LT |
4665 | { |
4666 | MPIDefaultReply_t *mptReply; | |
4667 | int failcnt = 0; | |
4668 | int t; | |
4669 | ||
4670 | /* | |
4671 | * Get ready to cache a handshake reply | |
4672 | */ | |
4673 | ioc->hs_reply_idx = 0; | |
4674 | mptReply = (MPIDefaultReply_t *) ioc->hs_reply; | |
4675 | mptReply->MsgLength = 0; | |
4676 | ||
4677 | /* | |
4678 | * Make sure there are no doorbells (WRITE 0 to IntStatus reg), | |
4679 | * then tell IOC that we want to handshake a request of N words. | |
4680 | * (WRITE u32val to Doorbell reg). | |
4681 | */ | |
4682 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
4683 | CHIPREG_WRITE32(&ioc->chip->Doorbell, | |
4684 | ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | | |
4685 | ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); | |
4686 | ||
4687 | /* | |
4688 | * Wait for IOC's doorbell handshake int | |
4689 | */ | |
4690 | if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) | |
4691 | failcnt++; | |
4692 | ||
436ace72 | 4693 | dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n", |
1da177e4 LT |
4694 | ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); |
4695 | ||
4696 | /* Read doorbell and check for active bit */ | |
4697 | if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) | |
4698 | return -1; | |
4699 | ||
4700 | /* | |
4701 | * Clear doorbell int (WRITE 0 to IntStatus reg), | |
4702 | * then wait for IOC to ACKnowledge that it's ready for | |
4703 | * our handshake request. | |
4704 | */ | |
4705 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
4706 | if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) | |
4707 | failcnt++; | |
4708 | ||
4709 | if (!failcnt) { | |
4710 | int ii; | |
4711 | u8 *req_as_bytes = (u8 *) req; | |
4712 | ||
4713 | /* | |
4714 | * Stuff request words via doorbell handshake, | |
4715 | * with ACK from IOC for each. | |
4716 | */ | |
4717 | for (ii = 0; !failcnt && ii < reqBytes/4; ii++) { | |
4718 | u32 word = ((req_as_bytes[(ii*4) + 0] << 0) | | |
4719 | (req_as_bytes[(ii*4) + 1] << 8) | | |
4720 | (req_as_bytes[(ii*4) + 2] << 16) | | |
4721 | (req_as_bytes[(ii*4) + 3] << 24)); | |
4722 | ||
4723 | CHIPREG_WRITE32(&ioc->chip->Doorbell, word); | |
4724 | if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) | |
4725 | failcnt++; | |
4726 | } | |
4727 | ||
436ace72 | 4728 | dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req)); |
29dd3609 | 4729 | DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req); |
1da177e4 | 4730 | |
436ace72 | 4731 | dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n", |
1da177e4 LT |
4732 | ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : "")); |
4733 | ||
4734 | /* | |
4735 | * Wait for completion of doorbell handshake reply from the IOC | |
4736 | */ | |
4737 | if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0) | |
4738 | failcnt++; | |
c6678e0c | 4739 | |
436ace72 | 4740 | dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n", |
1da177e4 LT |
4741 | ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : "")); |
4742 | ||
4743 | /* | |
4744 | * Copy out the cached reply... | |
4745 | */ | |
4746 | for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++) | |
4747 | u16reply[ii] = ioc->hs_reply[ii]; | |
4748 | } else { | |
4749 | return -99; | |
4750 | } | |
4751 | ||
4752 | return -failcnt; | |
4753 | } | |
4754 | ||
4755 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 RD |
4756 | /** |
4757 | * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge | |
1da177e4 LT |
4758 | * @ioc: Pointer to MPT_ADAPTER structure |
4759 | * @howlong: How long to wait (in seconds) | |
4760 | * @sleepFlag: Specifies whether the process can sleep | |
4761 | * | |
4762 | * This routine waits (up to ~2 seconds max) for IOC doorbell | |
d9489fb6 RD |
4763 | * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS |
4764 | * bit in its IntStatus register being clear. | |
1da177e4 LT |
4765 | * |
4766 | * Returns a negative value on failure, else wait loop count. | |
4767 | */ | |
4768 | static int | |
4769 | WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) | |
4770 | { | |
4771 | int cntdn; | |
4772 | int count = 0; | |
4773 | u32 intstat=0; | |
4774 | ||
466544d8 | 4775 | cntdn = 1000 * howlong; |
1da177e4 LT |
4776 | |
4777 | if (sleepFlag == CAN_SLEEP) { | |
4778 | while (--cntdn) { | |
0ccdb007 | 4779 | msleep (1); |
1da177e4 LT |
4780 | intstat = CHIPREG_READ32(&ioc->chip->IntStatus); |
4781 | if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) | |
4782 | break; | |
1da177e4 LT |
4783 | count++; |
4784 | } | |
4785 | } else { | |
4786 | while (--cntdn) { | |
cd2c6191 | 4787 | udelay (1000); |
1da177e4 LT |
4788 | intstat = CHIPREG_READ32(&ioc->chip->IntStatus); |
4789 | if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) | |
4790 | break; | |
1da177e4 LT |
4791 | count++; |
4792 | } | |
4793 | } | |
4794 | ||
4795 | if (cntdn) { | |
436ace72 | 4796 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n", |
1da177e4 LT |
4797 | ioc->name, count)); |
4798 | return count; | |
4799 | } | |
4800 | ||
4801 | printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n", | |
4802 | ioc->name, count, intstat); | |
4803 | return -1; | |
4804 | } | |
4805 | ||
4806 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 RD |
4807 | /** |
4808 | * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit | |
1da177e4 LT |
4809 | * @ioc: Pointer to MPT_ADAPTER structure |
4810 | * @howlong: How long to wait (in seconds) | |
4811 | * @sleepFlag: Specifies whether the process can sleep | |
4812 | * | |
d9489fb6 RD |
4813 | * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt |
4814 | * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register. | |
1da177e4 LT |
4815 | * |
4816 | * Returns a negative value on failure, else wait loop count. | |
4817 | */ | |
4818 | static int | |
4819 | WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) | |
4820 | { | |
4821 | int cntdn; | |
4822 | int count = 0; | |
4823 | u32 intstat=0; | |
4824 | ||
466544d8 | 4825 | cntdn = 1000 * howlong; |
1da177e4 LT |
4826 | if (sleepFlag == CAN_SLEEP) { |
4827 | while (--cntdn) { | |
4828 | intstat = CHIPREG_READ32(&ioc->chip->IntStatus); | |
4829 | if (intstat & MPI_HIS_DOORBELL_INTERRUPT) | |
4830 | break; | |
d6be06c8 | 4831 | msleep(1); |
1da177e4 LT |
4832 | count++; |
4833 | } | |
4834 | } else { | |
4835 | while (--cntdn) { | |
4836 | intstat = CHIPREG_READ32(&ioc->chip->IntStatus); | |
4837 | if (intstat & MPI_HIS_DOORBELL_INTERRUPT) | |
4838 | break; | |
cd2c6191 | 4839 | udelay (1000); |
1da177e4 LT |
4840 | count++; |
4841 | } | |
4842 | } | |
4843 | ||
4844 | if (cntdn) { | |
436ace72 | 4845 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n", |
1da177e4 LT |
4846 | ioc->name, count, howlong)); |
4847 | return count; | |
4848 | } | |
4849 | ||
4850 | printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n", | |
4851 | ioc->name, count, intstat); | |
4852 | return -1; | |
4853 | } | |
4854 | ||
4855 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 RD |
4856 | /** |
4857 | * WaitForDoorbellReply - Wait for and capture an IOC handshake reply. | |
1da177e4 LT |
4858 | * @ioc: Pointer to MPT_ADAPTER structure |
4859 | * @howlong: How long to wait (in seconds) | |
4860 | * @sleepFlag: Specifies whether the process can sleep | |
4861 | * | |
4862 | * This routine polls the IOC for a handshake reply, 16 bits at a time. | |
4863 | * Reply is cached to IOC private area large enough to hold a maximum | |
4864 | * of 128 bytes of reply data. | |
4865 | * | |
4866 | * Returns a negative value on failure, else size of reply in WORDS. | |
4867 | */ | |
4868 | static int | |
4869 | WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag) | |
4870 | { | |
4871 | int u16cnt = 0; | |
4872 | int failcnt = 0; | |
4873 | int t; | |
4874 | u16 *hs_reply = ioc->hs_reply; | |
4875 | volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply; | |
4876 | u16 hword; | |
4877 | ||
4878 | hs_reply[0] = hs_reply[1] = hs_reply[7] = 0; | |
4879 | ||
4880 | /* | |
4881 | * Get first two u16's so we can look at IOC's intended reply MsgLength | |
4882 | */ | |
4883 | u16cnt=0; | |
4884 | if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) { | |
4885 | failcnt++; | |
4886 | } else { | |
4887 | hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); | |
4888 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
4889 | if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) | |
4890 | failcnt++; | |
4891 | else { | |
4892 | hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); | |
4893 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
4894 | } | |
4895 | } | |
4896 | ||
436ace72 | 4897 | dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n", |
c6678e0c | 4898 | ioc->name, t, le32_to_cpu(*(u32 *)hs_reply), |
1da177e4 LT |
4899 | failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); |
4900 | ||
4901 | /* | |
4902 | * If no error (and IOC said MsgLength is > 0), piece together | |
4903 | * reply 16 bits at a time. | |
4904 | */ | |
4905 | for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) { | |
4906 | if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) | |
4907 | failcnt++; | |
4908 | hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); | |
4909 | /* don't overflow our IOC hs_reply[] buffer! */ | |
dd7c34e9 | 4910 | if (u16cnt < ARRAY_SIZE(ioc->hs_reply)) |
1da177e4 LT |
4911 | hs_reply[u16cnt] = hword; |
4912 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
4913 | } | |
4914 | ||
4915 | if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) | |
4916 | failcnt++; | |
4917 | CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); | |
4918 | ||
4919 | if (failcnt) { | |
4920 | printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n", | |
4921 | ioc->name); | |
4922 | return -failcnt; | |
4923 | } | |
4924 | #if 0 | |
4925 | else if (u16cnt != (2 * mptReply->MsgLength)) { | |
4926 | return -101; | |
4927 | } | |
4928 | else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { | |
4929 | return -102; | |
4930 | } | |
4931 | #endif | |
4932 | ||
436ace72 | 4933 | dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name)); |
29dd3609 | 4934 | DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply); |
1da177e4 | 4935 | |
436ace72 | 4936 | dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n", |
1da177e4 LT |
4937 | ioc->name, t, u16cnt/2)); |
4938 | return u16cnt/2; | |
4939 | } | |
4940 | ||
4941 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 4942 | /** |
1da177e4 LT |
4943 | * GetLanConfigPages - Fetch LANConfig pages. |
4944 | * @ioc: Pointer to MPT_ADAPTER structure | |
4945 | * | |
4946 | * Return: 0 for success | |
4947 | * -ENOMEM if no memory available | |
4948 | * -EPERM if not allowed due to ISR context | |
4949 | * -EAGAIN if no msg frames currently available | |
4950 | * -EFAULT for non-successful reply or no reply (timeout) | |
4951 | */ | |
4952 | static int | |
4953 | GetLanConfigPages(MPT_ADAPTER *ioc) | |
4954 | { | |
4955 | ConfigPageHeader_t hdr; | |
4956 | CONFIGPARMS cfg; | |
4957 | LANPage0_t *ppage0_alloc; | |
4958 | dma_addr_t page0_dma; | |
4959 | LANPage1_t *ppage1_alloc; | |
4960 | dma_addr_t page1_dma; | |
4961 | int rc = 0; | |
4962 | int data_sz; | |
4963 | int copy_sz; | |
4964 | ||
4965 | /* Get LAN Page 0 header */ | |
4966 | hdr.PageVersion = 0; | |
4967 | hdr.PageLength = 0; | |
4968 | hdr.PageNumber = 0; | |
4969 | hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; | |
69218ee5 | 4970 | cfg.cfghdr.hdr = &hdr; |
1da177e4 LT |
4971 | cfg.physAddr = -1; |
4972 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
4973 | cfg.dir = 0; | |
4974 | cfg.pageAddr = 0; | |
4975 | cfg.timeout = 0; | |
4976 | ||
4977 | if ((rc = mpt_config(ioc, &cfg)) != 0) | |
4978 | return rc; | |
4979 | ||
4980 | if (hdr.PageLength > 0) { | |
4981 | data_sz = hdr.PageLength * 4; | |
4982 | ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); | |
4983 | rc = -ENOMEM; | |
4984 | if (ppage0_alloc) { | |
4985 | memset((u8 *)ppage0_alloc, 0, data_sz); | |
4986 | cfg.physAddr = page0_dma; | |
4987 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
4988 | ||
4989 | if ((rc = mpt_config(ioc, &cfg)) == 0) { | |
4990 | /* save the data */ | |
4991 | copy_sz = min_t(int, sizeof(LANPage0_t), data_sz); | |
4992 | memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz); | |
4993 | ||
4994 | } | |
4995 | ||
4996 | pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); | |
4997 | ||
4998 | /* FIXME! | |
4999 | * Normalize endianness of structure data, | |
5000 | * by byte-swapping all > 1 byte fields! | |
5001 | */ | |
5002 | ||
5003 | } | |
5004 | ||
5005 | if (rc) | |
5006 | return rc; | |
5007 | } | |
5008 | ||
5009 | /* Get LAN Page 1 header */ | |
5010 | hdr.PageVersion = 0; | |
5011 | hdr.PageLength = 0; | |
5012 | hdr.PageNumber = 1; | |
5013 | hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; | |
69218ee5 | 5014 | cfg.cfghdr.hdr = &hdr; |
1da177e4 LT |
5015 | cfg.physAddr = -1; |
5016 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
5017 | cfg.dir = 0; | |
5018 | cfg.pageAddr = 0; | |
5019 | ||
5020 | if ((rc = mpt_config(ioc, &cfg)) != 0) | |
5021 | return rc; | |
5022 | ||
5023 | if (hdr.PageLength == 0) | |
5024 | return 0; | |
5025 | ||
5026 | data_sz = hdr.PageLength * 4; | |
5027 | rc = -ENOMEM; | |
5028 | ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma); | |
5029 | if (ppage1_alloc) { | |
5030 | memset((u8 *)ppage1_alloc, 0, data_sz); | |
5031 | cfg.physAddr = page1_dma; | |
5032 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
5033 | ||
5034 | if ((rc = mpt_config(ioc, &cfg)) == 0) { | |
5035 | /* save the data */ | |
5036 | copy_sz = min_t(int, sizeof(LANPage1_t), data_sz); | |
5037 | memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz); | |
5038 | } | |
5039 | ||
5040 | pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma); | |
5041 | ||
5042 | /* FIXME! | |
5043 | * Normalize endianness of structure data, | |
5044 | * by byte-swapping all > 1 byte fields! | |
5045 | */ | |
5046 | ||
5047 | } | |
5048 | ||
5049 | return rc; | |
5050 | } | |
5051 | ||
82ffb671 | 5052 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
d9489fb6 RD |
5053 | /** |
5054 | * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table | |
82ffb671 | 5055 | * @ioc: Pointer to MPT_ADAPTER structure |
82ffb671 CH |
5056 | * @persist_opcode: see below |
5057 | * | |
5058 | * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for | |
5059 | * devices not currently present. | |
5060 | * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings | |
5061 | * | |
5062 | * NOTE: Don't use not this function during interrupt time. | |
5063 | * | |
d9489fb6 | 5064 | * Returns 0 for success, non-zero error |
82ffb671 CH |
5065 | */ |
5066 | ||
5067 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
5068 | int | |
5069 | mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode) | |
5070 | { | |
5071 | SasIoUnitControlRequest_t *sasIoUnitCntrReq; | |
5072 | SasIoUnitControlReply_t *sasIoUnitCntrReply; | |
5073 | MPT_FRAME_HDR *mf = NULL; | |
5074 | MPIHeader_t *mpi_hdr; | |
f0f09d3b KD |
5075 | int ret = 0; |
5076 | unsigned long timeleft; | |
5077 | ||
5078 | mutex_lock(&ioc->mptbase_cmds.mutex); | |
82ffb671 | 5079 | |
f0f09d3b KD |
5080 | /* init the internal cmd struct */ |
5081 | memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); | |
5082 | INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) | |
82ffb671 CH |
5083 | |
5084 | /* insure garbage is not sent to fw */ | |
5085 | switch(persist_opcode) { | |
5086 | ||
5087 | case MPI_SAS_OP_CLEAR_NOT_PRESENT: | |
5088 | case MPI_SAS_OP_CLEAR_ALL_PERSISTENT: | |
5089 | break; | |
5090 | ||
5091 | default: | |
f0f09d3b KD |
5092 | ret = -1; |
5093 | goto out; | |
82ffb671 CH |
5094 | } |
5095 | ||
f0f09d3b KD |
5096 | printk(KERN_DEBUG "%s: persist_opcode=%x\n", |
5097 | __func__, persist_opcode); | |
82ffb671 CH |
5098 | |
5099 | /* Get a MF for this command. | |
5100 | */ | |
5101 | if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { | |
f0f09d3b KD |
5102 | printk(KERN_DEBUG "%s: no msg frames!\n", __func__); |
5103 | ret = -1; | |
5104 | goto out; | |
82ffb671 CH |
5105 | } |
5106 | ||
5107 | mpi_hdr = (MPIHeader_t *) mf; | |
5108 | sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf; | |
5109 | memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t)); | |
5110 | sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; | |
5111 | sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext; | |
5112 | sasIoUnitCntrReq->Operation = persist_opcode; | |
5113 | ||
82ffb671 | 5114 | mpt_put_msg_frame(mpt_base_index, ioc, mf); |
f0f09d3b KD |
5115 | timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ); |
5116 | if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { | |
5117 | ret = -ETIME; | |
5118 | printk(KERN_DEBUG "%s: failed\n", __func__); | |
5119 | if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) | |
5120 | goto out; | |
5121 | if (!timeleft) { | |
97009a29 KT |
5122 | printk(MYIOC_s_WARN_FMT |
5123 | "Issuing Reset from %s!!, doorbell=0x%08x\n", | |
5124 | ioc->name, __func__, mpt_GetIocState(ioc, 0)); | |
d0f698c4 | 5125 | mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); |
f0f09d3b KD |
5126 | mpt_free_msg_frame(ioc, mf); |
5127 | } | |
5128 | goto out; | |
5129 | } | |
5130 | ||
5131 | if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { | |
5132 | ret = -1; | |
5133 | goto out; | |
5134 | } | |
82ffb671 CH |
5135 | |
5136 | sasIoUnitCntrReply = | |
f0f09d3b | 5137 | (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply; |
82ffb671 | 5138 | if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) { |
f0f09d3b KD |
5139 | printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", |
5140 | __func__, sasIoUnitCntrReply->IOCStatus, | |
82ffb671 | 5141 | sasIoUnitCntrReply->IOCLogInfo); |
f0f09d3b KD |
5142 | printk(KERN_DEBUG "%s: failed\n", __func__); |
5143 | ret = -1; | |
5144 | } else | |
5145 | printk(KERN_DEBUG "%s: success\n", __func__); | |
5146 | out: | |
82ffb671 | 5147 | |
f0f09d3b KD |
5148 | CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) |
5149 | mutex_unlock(&ioc->mptbase_cmds.mutex); | |
5150 | return ret; | |
82ffb671 CH |
5151 | } |
5152 | ||
ece50914 ME |
5153 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
5154 | ||
5155 | static void | |
5156 | mptbase_raid_process_event_data(MPT_ADAPTER *ioc, | |
5157 | MpiEventDataRaid_t * pRaidEventData) | |
5158 | { | |
5159 | int volume; | |
5160 | int reason; | |
5161 | int disk; | |
5162 | int status; | |
5163 | int flags; | |
5164 | int state; | |
5165 | ||
5166 | volume = pRaidEventData->VolumeID; | |
5167 | reason = pRaidEventData->ReasonCode; | |
5168 | disk = pRaidEventData->PhysDiskNum; | |
5169 | status = le32_to_cpu(pRaidEventData->SettingsStatus); | |
5170 | flags = (status >> 0) & 0xff; | |
5171 | state = (status >> 8) & 0xff; | |
5172 | ||
5173 | if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { | |
5174 | return; | |
5175 | } | |
5176 | ||
5177 | if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED && | |
5178 | reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) || | |
5179 | (reason == MPI_EVENT_RAID_RC_SMART_DATA)) { | |
b506ade9 EM |
5180 | printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n", |
5181 | ioc->name, disk, volume); | |
ece50914 ME |
5182 | } else { |
5183 | printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n", | |
5184 | ioc->name, volume); | |
5185 | } | |
5186 | ||
5187 | switch(reason) { | |
5188 | case MPI_EVENT_RAID_RC_VOLUME_CREATED: | |
5189 | printk(MYIOC_s_INFO_FMT " volume has been created\n", | |
5190 | ioc->name); | |
5191 | break; | |
5192 | ||
5193 | case MPI_EVENT_RAID_RC_VOLUME_DELETED: | |
5194 | ||
5195 | printk(MYIOC_s_INFO_FMT " volume has been deleted\n", | |
5196 | ioc->name); | |
5197 | break; | |
5198 | ||
5199 | case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED: | |
5200 | printk(MYIOC_s_INFO_FMT " volume settings have been changed\n", | |
5201 | ioc->name); | |
5202 | break; | |
5203 | ||
5204 | case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: | |
5205 | printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n", | |
5206 | ioc->name, | |
5207 | state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL | |
5208 | ? "optimal" | |
5209 | : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED | |
5210 | ? "degraded" | |
5211 | : state == MPI_RAIDVOL0_STATUS_STATE_FAILED | |
5212 | ? "failed" | |
5213 | : "state unknown", | |
5214 | flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED | |
5215 | ? ", enabled" : "", | |
5216 | flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED | |
5217 | ? ", quiesced" : "", | |
5218 | flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS | |
5219 | ? ", resync in progress" : "" ); | |
5220 | break; | |
5221 | ||
5222 | case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED: | |
5223 | printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n", | |
5224 | ioc->name, disk); | |
5225 | break; | |
5226 | ||
5227 | case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: | |
5228 | printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n", | |
5229 | ioc->name); | |
5230 | break; | |
5231 | ||
5232 | case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: | |
5233 | printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n", | |
5234 | ioc->name); | |
5235 | break; | |
5236 | ||
5237 | case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED: | |
5238 | printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n", | |
5239 | ioc->name); | |
5240 | break; | |
5241 | ||
5242 | case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED: | |
5243 | printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n", | |
5244 | ioc->name, | |
5245 | state == MPI_PHYSDISK0_STATUS_ONLINE | |
5246 | ? "online" | |
5247 | : state == MPI_PHYSDISK0_STATUS_MISSING | |
5248 | ? "missing" | |
5249 | : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE | |
5250 | ? "not compatible" | |
5251 | : state == MPI_PHYSDISK0_STATUS_FAILED | |
5252 | ? "failed" | |
5253 | : state == MPI_PHYSDISK0_STATUS_INITIALIZING | |
5254 | ? "initializing" | |
5255 | : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED | |
5256 | ? "offline requested" | |
5257 | : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED | |
5258 | ? "failed requested" | |
5259 | : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE | |
5260 | ? "offline" | |
5261 | : "state unknown", | |
5262 | flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC | |
5263 | ? ", out of sync" : "", | |
5264 | flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED | |
5265 | ? ", quiesced" : "" ); | |
5266 | break; | |
5267 | ||
5268 | case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED: | |
5269 | printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n", | |
5270 | ioc->name, disk); | |
5271 | break; | |
5272 | ||
5273 | case MPI_EVENT_RAID_RC_SMART_DATA: | |
5274 | printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n", | |
5275 | ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ); | |
5276 | break; | |
5277 | ||
5278 | case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED: | |
5279 | printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n", | |
5280 | ioc->name, disk); | |
5281 | break; | |
5282 | } | |
5283 | } | |
5284 | ||
1da177e4 | 5285 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
d9489fb6 | 5286 | /** |
1da177e4 LT |
5287 | * GetIoUnitPage2 - Retrieve BIOS version and boot order information. |
5288 | * @ioc: Pointer to MPT_ADAPTER structure | |
5289 | * | |
5290 | * Returns: 0 for success | |
5291 | * -ENOMEM if no memory available | |
5292 | * -EPERM if not allowed due to ISR context | |
5293 | * -EAGAIN if no msg frames currently available | |
5294 | * -EFAULT for non-successful reply or no reply (timeout) | |
5295 | */ | |
5296 | static int | |
5297 | GetIoUnitPage2(MPT_ADAPTER *ioc) | |
5298 | { | |
5299 | ConfigPageHeader_t hdr; | |
5300 | CONFIGPARMS cfg; | |
5301 | IOUnitPage2_t *ppage_alloc; | |
5302 | dma_addr_t page_dma; | |
5303 | int data_sz; | |
5304 | int rc; | |
5305 | ||
5306 | /* Get the page header */ | |
5307 | hdr.PageVersion = 0; | |
5308 | hdr.PageLength = 0; | |
5309 | hdr.PageNumber = 2; | |
5310 | hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT; | |
69218ee5 | 5311 | cfg.cfghdr.hdr = &hdr; |
1da177e4 LT |
5312 | cfg.physAddr = -1; |
5313 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
5314 | cfg.dir = 0; | |
5315 | cfg.pageAddr = 0; | |
5316 | cfg.timeout = 0; | |
5317 | ||
5318 | if ((rc = mpt_config(ioc, &cfg)) != 0) | |
5319 | return rc; | |
5320 | ||
5321 | if (hdr.PageLength == 0) | |
5322 | return 0; | |
5323 | ||
5324 | /* Read the config page */ | |
5325 | data_sz = hdr.PageLength * 4; | |
5326 | rc = -ENOMEM; | |
5327 | ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma); | |
5328 | if (ppage_alloc) { | |
5329 | memset((u8 *)ppage_alloc, 0, data_sz); | |
5330 | cfg.physAddr = page_dma; | |
5331 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
5332 | ||
5333 | /* If Good, save data */ | |
5334 | if ((rc = mpt_config(ioc, &cfg)) == 0) | |
5335 | ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion); | |
5336 | ||
5337 | pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma); | |
5338 | } | |
5339 | ||
5340 | return rc; | |
5341 | } | |
5342 | ||
5343 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 RD |
5344 | /** |
5345 | * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 | |
1da177e4 LT |
5346 | * @ioc: Pointer to a Adapter Strucutre |
5347 | * @portnum: IOC port number | |
5348 | * | |
5349 | * Return: -EFAULT if read of config page header fails | |
5350 | * or if no nvram | |
5351 | * If read of SCSI Port Page 0 fails, | |
5352 | * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) | |
5353 | * Adapter settings: async, narrow | |
5354 | * Return 1 | |
5355 | * If read of SCSI Port Page 2 fails, | |
5356 | * Adapter settings valid | |
5357 | * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) | |
5358 | * Return 1 | |
5359 | * Else | |
5360 | * Both valid | |
5361 | * Return 0 | |
5362 | * CHECK - what type of locking mechanisms should be used???? | |
5363 | */ | |
5364 | static int | |
5365 | mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) | |
5366 | { | |
5367 | u8 *pbuf; | |
5368 | dma_addr_t buf_dma; | |
5369 | CONFIGPARMS cfg; | |
5370 | ConfigPageHeader_t header; | |
5371 | int ii; | |
5372 | int data, rc = 0; | |
5373 | ||
5374 | /* Allocate memory | |
5375 | */ | |
5376 | if (!ioc->spi_data.nvram) { | |
5377 | int sz; | |
5378 | u8 *mem; | |
5379 | sz = MPT_MAX_SCSI_DEVICES * sizeof(int); | |
5380 | mem = kmalloc(sz, GFP_ATOMIC); | |
5381 | if (mem == NULL) | |
5382 | return -EFAULT; | |
5383 | ||
5384 | ioc->spi_data.nvram = (int *) mem; | |
5385 | ||
436ace72 | 5386 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n", |
1da177e4 LT |
5387 | ioc->name, ioc->spi_data.nvram, sz)); |
5388 | } | |
5389 | ||
5390 | /* Invalidate NVRAM information | |
5391 | */ | |
5392 | for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { | |
5393 | ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID; | |
5394 | } | |
5395 | ||
5396 | /* Read SPP0 header, allocate memory, then read page. | |
5397 | */ | |
5398 | header.PageVersion = 0; | |
5399 | header.PageLength = 0; | |
5400 | header.PageNumber = 0; | |
5401 | header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; | |
69218ee5 | 5402 | cfg.cfghdr.hdr = &header; |
1da177e4 LT |
5403 | cfg.physAddr = -1; |
5404 | cfg.pageAddr = portnum; | |
5405 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
5406 | cfg.dir = 0; | |
5407 | cfg.timeout = 0; /* use default */ | |
5408 | if (mpt_config(ioc, &cfg) != 0) | |
5409 | return -EFAULT; | |
5410 | ||
5411 | if (header.PageLength > 0) { | |
5412 | pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma); | |
5413 | if (pbuf) { | |
5414 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
5415 | cfg.physAddr = buf_dma; | |
5416 | if (mpt_config(ioc, &cfg) != 0) { | |
5417 | ioc->spi_data.maxBusWidth = MPT_NARROW; | |
5418 | ioc->spi_data.maxSyncOffset = 0; | |
5419 | ioc->spi_data.minSyncFactor = MPT_ASYNC; | |
5420 | ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN; | |
5421 | rc = 1; | |
436ace72 PS |
5422 | ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
5423 | "Unable to read PortPage0 minSyncFactor=%x\n", | |
c6678e0c | 5424 | ioc->name, ioc->spi_data.minSyncFactor)); |
1da177e4 LT |
5425 | } else { |
5426 | /* Save the Port Page 0 data | |
5427 | */ | |
5428 | SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf; | |
5429 | pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities); | |
5430 | pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface); | |
5431 | ||
5432 | if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) { | |
5433 | ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS; | |
29dd3609 EM |
5434 | ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
5435 | "noQas due to Capabilities=%x\n", | |
1da177e4 LT |
5436 | ioc->name, pPP0->Capabilities)); |
5437 | } | |
5438 | ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0; | |
5439 | data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK; | |
5440 | if (data) { | |
5441 | ioc->spi_data.maxSyncOffset = (u8) (data >> 16); | |
5442 | data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK; | |
5443 | ioc->spi_data.minSyncFactor = (u8) (data >> 8); | |
436ace72 PS |
5444 | ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
5445 | "PortPage0 minSyncFactor=%x\n", | |
c6678e0c | 5446 | ioc->name, ioc->spi_data.minSyncFactor)); |
1da177e4 LT |
5447 | } else { |
5448 | ioc->spi_data.maxSyncOffset = 0; | |
5449 | ioc->spi_data.minSyncFactor = MPT_ASYNC; | |
5450 | } | |
5451 | ||
5452 | ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK; | |
5453 | ||
5454 | /* Update the minSyncFactor based on bus type. | |
5455 | */ | |
5456 | if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) || | |
5457 | (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) { | |
5458 | ||
c6678e0c | 5459 | if (ioc->spi_data.minSyncFactor < MPT_ULTRA) { |
1da177e4 | 5460 | ioc->spi_data.minSyncFactor = MPT_ULTRA; |
436ace72 PS |
5461 | ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
5462 | "HVD or SE detected, minSyncFactor=%x\n", | |
c6678e0c CH |
5463 | ioc->name, ioc->spi_data.minSyncFactor)); |
5464 | } | |
1da177e4 LT |
5465 | } |
5466 | } | |
5467 | if (pbuf) { | |
5468 | pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma); | |
5469 | } | |
5470 | } | |
5471 | } | |
5472 | ||
5473 | /* SCSI Port Page 2 - Read the header then the page. | |
5474 | */ | |
5475 | header.PageVersion = 0; | |
5476 | header.PageLength = 0; | |
5477 | header.PageNumber = 2; | |
5478 | header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; | |
69218ee5 | 5479 | cfg.cfghdr.hdr = &header; |
1da177e4 LT |
5480 | cfg.physAddr = -1; |
5481 | cfg.pageAddr = portnum; | |
5482 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
5483 | cfg.dir = 0; | |
5484 | if (mpt_config(ioc, &cfg) != 0) | |
5485 | return -EFAULT; | |
5486 | ||
5487 | if (header.PageLength > 0) { | |
5488 | /* Allocate memory and read SCSI Port Page 2 | |
5489 | */ | |
5490 | pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma); | |
5491 | if (pbuf) { | |
5492 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM; | |
5493 | cfg.physAddr = buf_dma; | |
5494 | if (mpt_config(ioc, &cfg) != 0) { | |
5495 | /* Nvram data is left with INVALID mark | |
5496 | */ | |
5497 | rc = 1; | |
232f08fc EM |
5498 | } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) { |
5499 | ||
5500 | /* This is an ATTO adapter, read Page2 accordingly | |
5501 | */ | |
5502 | ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf; | |
5503 | ATTODeviceInfo_t *pdevice = NULL; | |
5504 | u16 ATTOFlags; | |
5505 | ||
5506 | /* Save the Port Page 2 data | |
5507 | * (reformat into a 32bit quantity) | |
5508 | */ | |
5509 | for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { | |
5510 | pdevice = &pPP2->DeviceSettings[ii]; | |
5511 | ATTOFlags = le16_to_cpu(pdevice->ATTOFlags); | |
5512 | data = 0; | |
5513 | ||
5514 | /* Translate ATTO device flags to LSI format | |
5515 | */ | |
5516 | if (ATTOFlags & ATTOFLAG_DISC) | |
5517 | data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE); | |
5518 | if (ATTOFlags & ATTOFLAG_ID_ENB) | |
5519 | data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE); | |
5520 | if (ATTOFlags & ATTOFLAG_LUN_ENB) | |
5521 | data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE); | |
5522 | if (ATTOFlags & ATTOFLAG_TAGGED) | |
5523 | data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE); | |
5524 | if (!(ATTOFlags & ATTOFLAG_WIDE_ENB)) | |
5525 | data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE); | |
5526 | ||
5527 | data = (data << 16) | (pdevice->Period << 8) | 10; | |
5528 | ioc->spi_data.nvram[ii] = data; | |
5529 | } | |
1da177e4 LT |
5530 | } else { |
5531 | SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf; | |
5532 | MpiDeviceInfo_t *pdevice = NULL; | |
5533 | ||
d8e925dc ME |
5534 | /* |
5535 | * Save "Set to Avoid SCSI Bus Resets" flag | |
5536 | */ | |
5537 | ioc->spi_data.bus_reset = | |
5538 | (le32_to_cpu(pPP2->PortFlags) & | |
5539 | MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ? | |
5540 | 0 : 1 ; | |
5541 | ||
1da177e4 LT |
5542 | /* Save the Port Page 2 data |
5543 | * (reformat into a 32bit quantity) | |
5544 | */ | |
5545 | data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK; | |
5546 | ioc->spi_data.PortFlags = data; | |
5547 | for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { | |
5548 | pdevice = &pPP2->DeviceSettings[ii]; | |
5549 | data = (le16_to_cpu(pdevice->DeviceFlags) << 16) | | |
5550 | (pdevice->SyncFactor << 8) | pdevice->Timeout; | |
5551 | ioc->spi_data.nvram[ii] = data; | |
5552 | } | |
5553 | } | |
5554 | ||
5555 | pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma); | |
5556 | } | |
5557 | } | |
5558 | ||
5559 | /* Update Adapter limits with those from NVRAM | |
5560 | * Comment: Don't need to do this. Target performance | |
5561 | * parameters will never exceed the adapters limits. | |
5562 | */ | |
5563 | ||
5564 | return rc; | |
5565 | } | |
5566 | ||
5567 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 RD |
5568 | /** |
5569 | * mpt_readScsiDevicePageHeaders - save version and length of SDP1 | |
1da177e4 LT |
5570 | * @ioc: Pointer to a Adapter Strucutre |
5571 | * @portnum: IOC port number | |
5572 | * | |
5573 | * Return: -EFAULT if read of config page header fails | |
5574 | * or 0 if success. | |
5575 | */ | |
5576 | static int | |
5577 | mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) | |
5578 | { | |
5579 | CONFIGPARMS cfg; | |
5580 | ConfigPageHeader_t header; | |
5581 | ||
5582 | /* Read the SCSI Device Page 1 header | |
5583 | */ | |
5584 | header.PageVersion = 0; | |
5585 | header.PageLength = 0; | |
5586 | header.PageNumber = 1; | |
5587 | header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; | |
69218ee5 | 5588 | cfg.cfghdr.hdr = &header; |
1da177e4 LT |
5589 | cfg.physAddr = -1; |
5590 | cfg.pageAddr = portnum; | |
5591 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
5592 | cfg.dir = 0; | |
5593 | cfg.timeout = 0; | |
5594 | if (mpt_config(ioc, &cfg) != 0) | |
5595 | return -EFAULT; | |
5596 | ||
69218ee5 CH |
5597 | ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion; |
5598 | ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength; | |
1da177e4 LT |
5599 | |
5600 | header.PageVersion = 0; | |
5601 | header.PageLength = 0; | |
5602 | header.PageNumber = 0; | |
5603 | header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; | |
5604 | if (mpt_config(ioc, &cfg) != 0) | |
5605 | return -EFAULT; | |
5606 | ||
69218ee5 CH |
5607 | ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion; |
5608 | ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength; | |
1da177e4 | 5609 | |
436ace72 | 5610 | dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n", |
1da177e4 LT |
5611 | ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length)); |
5612 | ||
436ace72 | 5613 | dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n", |
1da177e4 LT |
5614 | ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length)); |
5615 | return 0; | |
5616 | } | |
5617 | ||
b506ade9 | 5618 | /** |
1544d677 RD |
5619 | * mpt_inactive_raid_list_free - This clears this link list. |
5620 | * @ioc : pointer to per adapter structure | |
b506ade9 EM |
5621 | **/ |
5622 | static void | |
5623 | mpt_inactive_raid_list_free(MPT_ADAPTER *ioc) | |
5624 | { | |
5625 | struct inactive_raid_component_info *component_info, *pNext; | |
5626 | ||
5627 | if (list_empty(&ioc->raid_data.inactive_list)) | |
5628 | return; | |
5629 | ||
ed5f606f | 5630 | mutex_lock(&ioc->raid_data.inactive_list_mutex); |
b506ade9 EM |
5631 | list_for_each_entry_safe(component_info, pNext, |
5632 | &ioc->raid_data.inactive_list, list) { | |
5633 | list_del(&component_info->list); | |
5634 | kfree(component_info); | |
5635 | } | |
ed5f606f | 5636 | mutex_unlock(&ioc->raid_data.inactive_list_mutex); |
b506ade9 EM |
5637 | } |
5638 | ||
5639 | /** | |
1544d677 | 5640 | * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume |
b506ade9 | 5641 | * |
1544d677 RD |
5642 | * @ioc : pointer to per adapter structure |
5643 | * @channel : volume channel | |
5644 | * @id : volume target id | |
b506ade9 EM |
5645 | **/ |
5646 | static void | |
5647 | mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id) | |
5648 | { | |
5649 | CONFIGPARMS cfg; | |
5650 | ConfigPageHeader_t hdr; | |
5651 | dma_addr_t dma_handle; | |
5652 | pRaidVolumePage0_t buffer = NULL; | |
5653 | int i; | |
5654 | RaidPhysDiskPage0_t phys_disk; | |
5655 | struct inactive_raid_component_info *component_info; | |
5656 | int handle_inactive_volumes; | |
5657 | ||
5658 | memset(&cfg, 0 , sizeof(CONFIGPARMS)); | |
5659 | memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); | |
5660 | hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; | |
5661 | cfg.pageAddr = (channel << 8) + id; | |
5662 | cfg.cfghdr.hdr = &hdr; | |
5663 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
5664 | ||
5665 | if (mpt_config(ioc, &cfg) != 0) | |
5666 | goto out; | |
5667 | ||
5668 | if (!hdr.PageLength) | |
5669 | goto out; | |
5670 | ||
5671 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, | |
5672 | &dma_handle); | |
5673 | ||
5674 | if (!buffer) | |
5675 | goto out; | |
5676 | ||
5677 | cfg.physAddr = dma_handle; | |
5678 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
5679 | ||
5680 | if (mpt_config(ioc, &cfg) != 0) | |
5681 | goto out; | |
5682 | ||
5683 | if (!buffer->NumPhysDisks) | |
5684 | goto out; | |
5685 | ||
5686 | handle_inactive_volumes = | |
5687 | (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE || | |
5688 | (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 || | |
5689 | buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED || | |
5690 | buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0; | |
5691 | ||
5692 | if (!handle_inactive_volumes) | |
5693 | goto out; | |
5694 | ||
ed5f606f | 5695 | mutex_lock(&ioc->raid_data.inactive_list_mutex); |
b506ade9 EM |
5696 | for (i = 0; i < buffer->NumPhysDisks; i++) { |
5697 | if(mpt_raid_phys_disk_pg0(ioc, | |
5698 | buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) | |
5699 | continue; | |
5700 | ||
5701 | if ((component_info = kmalloc(sizeof (*component_info), | |
5702 | GFP_KERNEL)) == NULL) | |
5703 | continue; | |
5704 | ||
5705 | component_info->volumeID = id; | |
5706 | component_info->volumeBus = channel; | |
5707 | component_info->d.PhysDiskNum = phys_disk.PhysDiskNum; | |
5708 | component_info->d.PhysDiskBus = phys_disk.PhysDiskBus; | |
5709 | component_info->d.PhysDiskID = phys_disk.PhysDiskID; | |
5710 | component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC; | |
5711 | ||
5712 | list_add_tail(&component_info->list, | |
5713 | &ioc->raid_data.inactive_list); | |
5714 | } | |
ed5f606f | 5715 | mutex_unlock(&ioc->raid_data.inactive_list_mutex); |
b506ade9 EM |
5716 | |
5717 | out: | |
5718 | if (buffer) | |
5719 | pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, | |
5720 | dma_handle); | |
5721 | } | |
5722 | ||
5723 | /** | |
5724 | * mpt_raid_phys_disk_pg0 - returns phys disk page zero | |
5725 | * @ioc: Pointer to a Adapter Structure | |
5726 | * @phys_disk_num: io unit unique phys disk num generated by the ioc | |
5727 | * @phys_disk: requested payload data returned | |
5728 | * | |
5729 | * Return: | |
5730 | * 0 on success | |
5731 | * -EFAULT if read of config page header fails or data pointer not NULL | |
5732 | * -ENOMEM if pci_alloc failed | |
5733 | **/ | |
5734 | int | |
2f187862 KD |
5735 | mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, |
5736 | RaidPhysDiskPage0_t *phys_disk) | |
b506ade9 | 5737 | { |
2f187862 KD |
5738 | CONFIGPARMS cfg; |
5739 | ConfigPageHeader_t hdr; | |
b506ade9 EM |
5740 | dma_addr_t dma_handle; |
5741 | pRaidPhysDiskPage0_t buffer = NULL; | |
5742 | int rc; | |
5743 | ||
5744 | memset(&cfg, 0 , sizeof(CONFIGPARMS)); | |
5745 | memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); | |
2f187862 | 5746 | memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t)); |
b506ade9 | 5747 | |
2f187862 | 5748 | hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION; |
b506ade9 EM |
5749 | hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; |
5750 | cfg.cfghdr.hdr = &hdr; | |
5751 | cfg.physAddr = -1; | |
5752 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
5753 | ||
5754 | if (mpt_config(ioc, &cfg) != 0) { | |
5755 | rc = -EFAULT; | |
5756 | goto out; | |
5757 | } | |
5758 | ||
5759 | if (!hdr.PageLength) { | |
5760 | rc = -EFAULT; | |
5761 | goto out; | |
5762 | } | |
5763 | ||
5764 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, | |
5765 | &dma_handle); | |
5766 | ||
5767 | if (!buffer) { | |
5768 | rc = -ENOMEM; | |
5769 | goto out; | |
5770 | } | |
5771 | ||
5772 | cfg.physAddr = dma_handle; | |
5773 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
5774 | cfg.pageAddr = phys_disk_num; | |
5775 | ||
5776 | if (mpt_config(ioc, &cfg) != 0) { | |
5777 | rc = -EFAULT; | |
5778 | goto out; | |
5779 | } | |
5780 | ||
5781 | rc = 0; | |
5782 | memcpy(phys_disk, buffer, sizeof(*buffer)); | |
5783 | phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA); | |
5784 | ||
5785 | out: | |
5786 | ||
5787 | if (buffer) | |
5788 | pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, | |
5789 | dma_handle); | |
5790 | ||
5791 | return rc; | |
5792 | } | |
5793 | ||
a7938b0b KD |
5794 | /** |
5795 | * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num | |
5796 | * @ioc: Pointer to a Adapter Structure | |
5797 | * @phys_disk_num: io unit unique phys disk num generated by the ioc | |
5798 | * | |
5799 | * Return: | |
5800 | * returns number paths | |
5801 | **/ | |
5802 | int | |
5803 | mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num) | |
5804 | { | |
5805 | CONFIGPARMS cfg; | |
5806 | ConfigPageHeader_t hdr; | |
5807 | dma_addr_t dma_handle; | |
5808 | pRaidPhysDiskPage1_t buffer = NULL; | |
5809 | int rc; | |
5810 | ||
5811 | memset(&cfg, 0 , sizeof(CONFIGPARMS)); | |
5812 | memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); | |
5813 | ||
5814 | hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; | |
5815 | hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; | |
5816 | hdr.PageNumber = 1; | |
5817 | cfg.cfghdr.hdr = &hdr; | |
5818 | cfg.physAddr = -1; | |
5819 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
5820 | ||
5821 | if (mpt_config(ioc, &cfg) != 0) { | |
5822 | rc = 0; | |
5823 | goto out; | |
5824 | } | |
5825 | ||
5826 | if (!hdr.PageLength) { | |
5827 | rc = 0; | |
5828 | goto out; | |
5829 | } | |
5830 | ||
5831 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, | |
5832 | &dma_handle); | |
5833 | ||
5834 | if (!buffer) { | |
5835 | rc = 0; | |
5836 | goto out; | |
5837 | } | |
5838 | ||
5839 | cfg.physAddr = dma_handle; | |
5840 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
5841 | cfg.pageAddr = phys_disk_num; | |
5842 | ||
5843 | if (mpt_config(ioc, &cfg) != 0) { | |
5844 | rc = 0; | |
5845 | goto out; | |
5846 | } | |
5847 | ||
5848 | rc = buffer->NumPhysDiskPaths; | |
5849 | out: | |
5850 | ||
5851 | if (buffer) | |
5852 | pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, | |
5853 | dma_handle); | |
5854 | ||
5855 | return rc; | |
5856 | } | |
5857 | EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths); | |
5858 | ||
5859 | /** | |
5860 | * mpt_raid_phys_disk_pg1 - returns phys disk page 1 | |
5861 | * @ioc: Pointer to a Adapter Structure | |
5862 | * @phys_disk_num: io unit unique phys disk num generated by the ioc | |
5863 | * @phys_disk: requested payload data returned | |
5864 | * | |
5865 | * Return: | |
5866 | * 0 on success | |
5867 | * -EFAULT if read of config page header fails or data pointer not NULL | |
5868 | * -ENOMEM if pci_alloc failed | |
5869 | **/ | |
5870 | int | |
5871 | mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num, | |
5872 | RaidPhysDiskPage1_t *phys_disk) | |
5873 | { | |
5874 | CONFIGPARMS cfg; | |
5875 | ConfigPageHeader_t hdr; | |
5876 | dma_addr_t dma_handle; | |
5877 | pRaidPhysDiskPage1_t buffer = NULL; | |
5878 | int rc; | |
5879 | int i; | |
5880 | __le64 sas_address; | |
5881 | ||
5882 | memset(&cfg, 0 , sizeof(CONFIGPARMS)); | |
5883 | memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); | |
5884 | rc = 0; | |
5885 | ||
5886 | hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; | |
5887 | hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; | |
5888 | hdr.PageNumber = 1; | |
5889 | cfg.cfghdr.hdr = &hdr; | |
5890 | cfg.physAddr = -1; | |
5891 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
5892 | ||
5893 | if (mpt_config(ioc, &cfg) != 0) { | |
5894 | rc = -EFAULT; | |
5895 | goto out; | |
5896 | } | |
5897 | ||
5898 | if (!hdr.PageLength) { | |
5899 | rc = -EFAULT; | |
5900 | goto out; | |
5901 | } | |
5902 | ||
5903 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, | |
5904 | &dma_handle); | |
5905 | ||
5906 | if (!buffer) { | |
5907 | rc = -ENOMEM; | |
5908 | goto out; | |
5909 | } | |
5910 | ||
5911 | cfg.physAddr = dma_handle; | |
5912 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
5913 | cfg.pageAddr = phys_disk_num; | |
5914 | ||
5915 | if (mpt_config(ioc, &cfg) != 0) { | |
5916 | rc = -EFAULT; | |
5917 | goto out; | |
5918 | } | |
5919 | ||
5920 | phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths; | |
5921 | phys_disk->PhysDiskNum = phys_disk_num; | |
5922 | for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) { | |
5923 | phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID; | |
5924 | phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus; | |
5925 | phys_disk->Path[i].OwnerIdentifier = | |
5926 | buffer->Path[i].OwnerIdentifier; | |
5927 | phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags); | |
5928 | memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64)); | |
5929 | sas_address = le64_to_cpu(sas_address); | |
5930 | memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64)); | |
5931 | memcpy(&sas_address, | |
5932 | &buffer->Path[i].OwnerWWID, sizeof(__le64)); | |
5933 | sas_address = le64_to_cpu(sas_address); | |
5934 | memcpy(&phys_disk->Path[i].OwnerWWID, | |
5935 | &sas_address, sizeof(__le64)); | |
5936 | } | |
5937 | ||
5938 | out: | |
5939 | ||
5940 | if (buffer) | |
5941 | pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, | |
5942 | dma_handle); | |
5943 | ||
5944 | return rc; | |
5945 | } | |
5946 | EXPORT_SYMBOL(mpt_raid_phys_disk_pg1); | |
5947 | ||
5948 | ||
1da177e4 LT |
5949 | /** |
5950 | * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes | |
5951 | * @ioc: Pointer to a Adapter Strucutre | |
1da177e4 LT |
5952 | * |
5953 | * Return: | |
5954 | * 0 on success | |
5955 | * -EFAULT if read of config page header fails or data pointer not NULL | |
5956 | * -ENOMEM if pci_alloc failed | |
b506ade9 | 5957 | **/ |
1da177e4 LT |
5958 | int |
5959 | mpt_findImVolumes(MPT_ADAPTER *ioc) | |
5960 | { | |
5961 | IOCPage2_t *pIoc2; | |
5962 | u8 *mem; | |
1da177e4 LT |
5963 | dma_addr_t ioc2_dma; |
5964 | CONFIGPARMS cfg; | |
5965 | ConfigPageHeader_t header; | |
1da177e4 LT |
5966 | int rc = 0; |
5967 | int iocpage2sz; | |
b506ade9 EM |
5968 | int i; |
5969 | ||
5970 | if (!ioc->ir_firmware) | |
5971 | return 0; | |
5972 | ||
5973 | /* Free the old page | |
5974 | */ | |
5975 | kfree(ioc->raid_data.pIocPg2); | |
5976 | ioc->raid_data.pIocPg2 = NULL; | |
5977 | mpt_inactive_raid_list_free(ioc); | |
1da177e4 LT |
5978 | |
5979 | /* Read IOCP2 header then the page. | |
5980 | */ | |
5981 | header.PageVersion = 0; | |
5982 | header.PageLength = 0; | |
5983 | header.PageNumber = 2; | |
5984 | header.PageType = MPI_CONFIG_PAGETYPE_IOC; | |
69218ee5 | 5985 | cfg.cfghdr.hdr = &header; |
1da177e4 LT |
5986 | cfg.physAddr = -1; |
5987 | cfg.pageAddr = 0; | |
5988 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
5989 | cfg.dir = 0; | |
5990 | cfg.timeout = 0; | |
5991 | if (mpt_config(ioc, &cfg) != 0) | |
5992 | return -EFAULT; | |
5993 | ||
5994 | if (header.PageLength == 0) | |
5995 | return -EFAULT; | |
5996 | ||
5997 | iocpage2sz = header.PageLength * 4; | |
5998 | pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma); | |
5999 | if (!pIoc2) | |
6000 | return -ENOMEM; | |
6001 | ||
6002 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
6003 | cfg.physAddr = ioc2_dma; | |
6004 | if (mpt_config(ioc, &cfg) != 0) | |
b506ade9 EM |
6005 | goto out; |
6006 | ||
6007 | mem = kmalloc(iocpage2sz, GFP_KERNEL); | |
1c1acab0 JL |
6008 | if (!mem) { |
6009 | rc = -ENOMEM; | |
b506ade9 | 6010 | goto out; |
1c1acab0 | 6011 | } |
1da177e4 | 6012 | |
1da177e4 | 6013 | memcpy(mem, (u8 *)pIoc2, iocpage2sz); |
b506ade9 | 6014 | ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; |
1da177e4 | 6015 | |
b506ade9 | 6016 | mpt_read_ioc_pg_3(ioc); |
1da177e4 | 6017 | |
b506ade9 EM |
6018 | for (i = 0; i < pIoc2->NumActiveVolumes ; i++) |
6019 | mpt_inactive_raid_volumes(ioc, | |
6020 | pIoc2->RaidVolume[i].VolumeBus, | |
6021 | pIoc2->RaidVolume[i].VolumeID); | |
1da177e4 | 6022 | |
b506ade9 | 6023 | out: |
1da177e4 LT |
6024 | pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma); |
6025 | ||
6026 | return rc; | |
6027 | } | |
6028 | ||
c972c70f | 6029 | static int |
1da177e4 LT |
6030 | mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) |
6031 | { | |
6032 | IOCPage3_t *pIoc3; | |
6033 | u8 *mem; | |
6034 | CONFIGPARMS cfg; | |
6035 | ConfigPageHeader_t header; | |
6036 | dma_addr_t ioc3_dma; | |
6037 | int iocpage3sz = 0; | |
6038 | ||
6039 | /* Free the old page | |
6040 | */ | |
466544d8 MED |
6041 | kfree(ioc->raid_data.pIocPg3); |
6042 | ioc->raid_data.pIocPg3 = NULL; | |
1da177e4 LT |
6043 | |
6044 | /* There is at least one physical disk. | |
6045 | * Read and save IOC Page 3 | |
6046 | */ | |
6047 | header.PageVersion = 0; | |
6048 | header.PageLength = 0; | |
6049 | header.PageNumber = 3; | |
6050 | header.PageType = MPI_CONFIG_PAGETYPE_IOC; | |
69218ee5 | 6051 | cfg.cfghdr.hdr = &header; |
1da177e4 LT |
6052 | cfg.physAddr = -1; |
6053 | cfg.pageAddr = 0; | |
6054 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
6055 | cfg.dir = 0; | |
6056 | cfg.timeout = 0; | |
6057 | if (mpt_config(ioc, &cfg) != 0) | |
6058 | return 0; | |
6059 | ||
6060 | if (header.PageLength == 0) | |
6061 | return 0; | |
6062 | ||
6063 | /* Read Header good, alloc memory | |
6064 | */ | |
6065 | iocpage3sz = header.PageLength * 4; | |
6066 | pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma); | |
6067 | if (!pIoc3) | |
6068 | return 0; | |
6069 | ||
6070 | /* Read the Page and save the data | |
6071 | * into malloc'd memory. | |
6072 | */ | |
6073 | cfg.physAddr = ioc3_dma; | |
6074 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
6075 | if (mpt_config(ioc, &cfg) == 0) { | |
b506ade9 | 6076 | mem = kmalloc(iocpage3sz, GFP_KERNEL); |
1da177e4 LT |
6077 | if (mem) { |
6078 | memcpy(mem, (u8 *)pIoc3, iocpage3sz); | |
466544d8 | 6079 | ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem; |
1da177e4 LT |
6080 | } |
6081 | } | |
6082 | ||
6083 | pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma); | |
6084 | ||
6085 | return 0; | |
6086 | } | |
6087 | ||
6088 | static void | |
6089 | mpt_read_ioc_pg_4(MPT_ADAPTER *ioc) | |
6090 | { | |
6091 | IOCPage4_t *pIoc4; | |
6092 | CONFIGPARMS cfg; | |
6093 | ConfigPageHeader_t header; | |
6094 | dma_addr_t ioc4_dma; | |
6095 | int iocpage4sz; | |
6096 | ||
6097 | /* Read and save IOC Page 4 | |
6098 | */ | |
6099 | header.PageVersion = 0; | |
6100 | header.PageLength = 0; | |
6101 | header.PageNumber = 4; | |
6102 | header.PageType = MPI_CONFIG_PAGETYPE_IOC; | |
69218ee5 | 6103 | cfg.cfghdr.hdr = &header; |
1da177e4 LT |
6104 | cfg.physAddr = -1; |
6105 | cfg.pageAddr = 0; | |
6106 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
6107 | cfg.dir = 0; | |
6108 | cfg.timeout = 0; | |
6109 | if (mpt_config(ioc, &cfg) != 0) | |
6110 | return; | |
6111 | ||
6112 | if (header.PageLength == 0) | |
6113 | return; | |
6114 | ||
6115 | if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) { | |
6116 | iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */ | |
6117 | pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma); | |
6118 | if (!pIoc4) | |
6119 | return; | |
0ccdb007 | 6120 | ioc->alloc_total += iocpage4sz; |
1da177e4 LT |
6121 | } else { |
6122 | ioc4_dma = ioc->spi_data.IocPg4_dma; | |
6123 | iocpage4sz = ioc->spi_data.IocPg4Sz; | |
6124 | } | |
6125 | ||
6126 | /* Read the Page into dma memory. | |
6127 | */ | |
6128 | cfg.physAddr = ioc4_dma; | |
6129 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
6130 | if (mpt_config(ioc, &cfg) == 0) { | |
6131 | ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4; | |
6132 | ioc->spi_data.IocPg4_dma = ioc4_dma; | |
6133 | ioc->spi_data.IocPg4Sz = iocpage4sz; | |
6134 | } else { | |
6135 | pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma); | |
6136 | ioc->spi_data.pIocPg4 = NULL; | |
0ccdb007 | 6137 | ioc->alloc_total -= iocpage4sz; |
1da177e4 LT |
6138 | } |
6139 | } | |
6140 | ||
6141 | static void | |
6142 | mpt_read_ioc_pg_1(MPT_ADAPTER *ioc) | |
6143 | { | |
6144 | IOCPage1_t *pIoc1; | |
6145 | CONFIGPARMS cfg; | |
6146 | ConfigPageHeader_t header; | |
6147 | dma_addr_t ioc1_dma; | |
6148 | int iocpage1sz = 0; | |
6149 | u32 tmp; | |
6150 | ||
6151 | /* Check the Coalescing Timeout in IOC Page 1 | |
6152 | */ | |
6153 | header.PageVersion = 0; | |
6154 | header.PageLength = 0; | |
6155 | header.PageNumber = 1; | |
6156 | header.PageType = MPI_CONFIG_PAGETYPE_IOC; | |
69218ee5 | 6157 | cfg.cfghdr.hdr = &header; |
1da177e4 LT |
6158 | cfg.physAddr = -1; |
6159 | cfg.pageAddr = 0; | |
6160 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
6161 | cfg.dir = 0; | |
6162 | cfg.timeout = 0; | |
6163 | if (mpt_config(ioc, &cfg) != 0) | |
6164 | return; | |
6165 | ||
6166 | if (header.PageLength == 0) | |
6167 | return; | |
6168 | ||
6169 | /* Read Header good, alloc memory | |
6170 | */ | |
6171 | iocpage1sz = header.PageLength * 4; | |
6172 | pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma); | |
6173 | if (!pIoc1) | |
6174 | return; | |
6175 | ||
6176 | /* Read the Page and check coalescing timeout | |
6177 | */ | |
6178 | cfg.physAddr = ioc1_dma; | |
6179 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
6180 | if (mpt_config(ioc, &cfg) == 0) { | |
436ace72 | 6181 | |
1da177e4 LT |
6182 | tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING; |
6183 | if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) { | |
6184 | tmp = le32_to_cpu(pIoc1->CoalescingTimeout); | |
6185 | ||
436ace72 | 6186 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n", |
1da177e4 LT |
6187 | ioc->name, tmp)); |
6188 | ||
6189 | if (tmp > MPT_COALESCING_TIMEOUT) { | |
6190 | pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT); | |
6191 | ||
6192 | /* Write NVRAM and current | |
6193 | */ | |
6194 | cfg.dir = 1; | |
6195 | cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; | |
6196 | if (mpt_config(ioc, &cfg) == 0) { | |
436ace72 | 6197 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n", |
1da177e4 LT |
6198 | ioc->name, MPT_COALESCING_TIMEOUT)); |
6199 | ||
6200 | cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM; | |
6201 | if (mpt_config(ioc, &cfg) == 0) { | |
436ace72 PS |
6202 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
6203 | "Reset NVRAM Coalescing Timeout to = %d\n", | |
1da177e4 LT |
6204 | ioc->name, MPT_COALESCING_TIMEOUT)); |
6205 | } else { | |
436ace72 PS |
6206 | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
6207 | "Reset NVRAM Coalescing Timeout Failed\n", | |
6208 | ioc->name)); | |
1da177e4 LT |
6209 | } |
6210 | ||
6211 | } else { | |
436ace72 PS |
6212 | dprintk(ioc, printk(MYIOC_s_WARN_FMT |
6213 | "Reset of Current Coalescing Timeout Failed!\n", | |
6214 | ioc->name)); | |
1da177e4 LT |
6215 | } |
6216 | } | |
6217 | ||
6218 | } else { | |
436ace72 | 6219 | dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name)); |
1da177e4 LT |
6220 | } |
6221 | } | |
6222 | ||
6223 | pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma); | |
6224 | ||
6225 | return; | |
6226 | } | |
6227 | ||
edb9068d PS |
6228 | static void |
6229 | mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc) | |
6230 | { | |
6231 | CONFIGPARMS cfg; | |
6232 | ConfigPageHeader_t hdr; | |
6233 | dma_addr_t buf_dma; | |
6234 | ManufacturingPage0_t *pbuf = NULL; | |
6235 | ||
6236 | memset(&cfg, 0 , sizeof(CONFIGPARMS)); | |
6237 | memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); | |
6238 | ||
6239 | hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING; | |
6240 | cfg.cfghdr.hdr = &hdr; | |
6241 | cfg.physAddr = -1; | |
6242 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
6243 | cfg.timeout = 10; | |
6244 | ||
6245 | if (mpt_config(ioc, &cfg) != 0) | |
6246 | goto out; | |
6247 | ||
6248 | if (!cfg.cfghdr.hdr->PageLength) | |
6249 | goto out; | |
6250 | ||
6251 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
6252 | pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma); | |
6253 | if (!pbuf) | |
6254 | goto out; | |
6255 | ||
6256 | cfg.physAddr = buf_dma; | |
6257 | ||
6258 | if (mpt_config(ioc, &cfg) != 0) | |
6259 | goto out; | |
6260 | ||
6261 | memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name)); | |
6262 | memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly)); | |
6263 | memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer)); | |
6264 | ||
6265 | out: | |
6266 | ||
6267 | if (pbuf) | |
6268 | pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma); | |
6269 | } | |
6270 | ||
1da177e4 | 6271 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
d9489fb6 RD |
6272 | /** |
6273 | * SendEventNotification - Send EventNotification (on or off) request to adapter | |
1da177e4 LT |
6274 | * @ioc: Pointer to MPT_ADAPTER structure |
6275 | * @EvSwitch: Event switch flags | |
fd76175a | 6276 | * @sleepFlag: Specifies whether the process can sleep |
1da177e4 LT |
6277 | */ |
6278 | static int | |
fd76175a | 6279 | SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag) |
1da177e4 | 6280 | { |
fd76175a KD |
6281 | EventNotification_t evn; |
6282 | MPIDefaultReply_t reply_buf; | |
1da177e4 | 6283 | |
fd76175a KD |
6284 | memset(&evn, 0, sizeof(EventNotification_t)); |
6285 | memset(&reply_buf, 0, sizeof(MPIDefaultReply_t)); | |
1da177e4 | 6286 | |
fd76175a KD |
6287 | evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION; |
6288 | evn.Switch = EvSwitch; | |
6289 | evn.MsgContext = cpu_to_le32(mpt_base_index << 16); | |
1da177e4 | 6290 | |
fd76175a KD |
6291 | devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
6292 | "Sending EventNotification (%d) request %p\n", | |
6293 | ioc->name, EvSwitch, &evn)); | |
1da177e4 | 6294 | |
fd76175a KD |
6295 | return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t), |
6296 | (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30, | |
6297 | sleepFlag); | |
1da177e4 LT |
6298 | } |
6299 | ||
6300 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
6301 | /** | |
6302 | * SendEventAck - Send EventAck request to MPT adapter. | |
6303 | * @ioc: Pointer to MPT_ADAPTER structure | |
6304 | * @evnp: Pointer to original EventNotification request | |
6305 | */ | |
6306 | static int | |
6307 | SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp) | |
6308 | { | |
6309 | EventAck_t *pAck; | |
6310 | ||
6311 | if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { | |
436ace72 | 6312 | dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n", |
f0f09d3b | 6313 | ioc->name, __func__)); |
1da177e4 LT |
6314 | return -1; |
6315 | } | |
1da177e4 | 6316 | |
436ace72 | 6317 | devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name)); |
1da177e4 LT |
6318 | |
6319 | pAck->Function = MPI_FUNCTION_EVENT_ACK; | |
6320 | pAck->ChainOffset = 0; | |
4f766dc6 | 6321 | pAck->Reserved[0] = pAck->Reserved[1] = 0; |
1da177e4 | 6322 | pAck->MsgFlags = 0; |
4f766dc6 | 6323 | pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0; |
1da177e4 LT |
6324 | pAck->Event = evnp->Event; |
6325 | pAck->EventContext = evnp->EventContext; | |
6326 | ||
6327 | mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck); | |
6328 | ||
6329 | return 0; | |
6330 | } | |
6331 | ||
6332 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
6333 | /** | |
6334 | * mpt_config - Generic function to issue config message | |
d9489fb6 RD |
6335 | * @ioc: Pointer to an adapter structure |
6336 | * @pCfg: Pointer to a configuration structure. Struct contains | |
1da177e4 LT |
6337 | * action, page address, direction, physical address |
6338 | * and pointer to a configuration page header | |
6339 | * Page header is updated. | |
6340 | * | |
6341 | * Returns 0 for success | |
6342 | * -EPERM if not allowed due to ISR context | |
6343 | * -EAGAIN if no msg frames currently available | |
6344 | * -EFAULT for non-successful reply or no reply (timeout) | |
6345 | */ | |
6346 | int | |
6347 | mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) | |
6348 | { | |
6349 | Config_t *pReq; | |
f0f09d3b | 6350 | ConfigReply_t *pReply; |
69218ee5 | 6351 | ConfigExtendedPageHeader_t *pExtHdr = NULL; |
1da177e4 | 6352 | MPT_FRAME_HDR *mf; |
f0f09d3b | 6353 | int ii; |
69218ee5 | 6354 | int flagsLength; |
f0f09d3b KD |
6355 | long timeout; |
6356 | int ret; | |
6357 | u8 page_type = 0, extend_page; | |
6358 | unsigned long timeleft; | |
2f187862 KD |
6359 | unsigned long flags; |
6360 | int in_isr; | |
f0f09d3b KD |
6361 | u8 issue_hard_reset = 0; |
6362 | u8 retry_count = 0; | |
1da177e4 | 6363 | |
7fadc87e | 6364 | /* Prevent calling wait_event() (below), if caller happens |
1da177e4 LT |
6365 | * to be in ISR context, because that is fatal! |
6366 | */ | |
6367 | in_isr = in_interrupt(); | |
6368 | if (in_isr) { | |
436ace72 | 6369 | dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n", |
1da177e4 LT |
6370 | ioc->name)); |
6371 | return -EPERM; | |
2f187862 KD |
6372 | } |
6373 | ||
6374 | /* don't send a config page during diag reset */ | |
6375 | spin_lock_irqsave(&ioc->taskmgmt_lock, flags); | |
6376 | if (ioc->ioc_reset_in_progress) { | |
6377 | dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
6378 | "%s: busy with host reset\n", ioc->name, __func__)); | |
6379 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); | |
6380 | return -EBUSY; | |
1da177e4 | 6381 | } |
2f187862 | 6382 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
1da177e4 | 6383 | |
f0f09d3b KD |
6384 | /* don't send if no chance of success */ |
6385 | if (!ioc->active || | |
6386 | mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) { | |
6387 | dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
6388 | "%s: ioc not operational, %d, %xh\n", | |
6389 | ioc->name, __func__, ioc->active, | |
6390 | mpt_GetIocState(ioc, 0))); | |
6391 | return -EFAULT; | |
6392 | } | |
6393 | ||
6394 | retry_config: | |
6395 | mutex_lock(&ioc->mptbase_cmds.mutex); | |
6396 | /* init the internal cmd struct */ | |
6397 | memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); | |
6398 | INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) | |
6399 | ||
1da177e4 LT |
6400 | /* Get and Populate a free Frame |
6401 | */ | |
6402 | if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { | |
f0f09d3b KD |
6403 | dcprintk(ioc, printk(MYIOC_s_WARN_FMT |
6404 | "mpt_config: no msg frames!\n", ioc->name)); | |
6405 | ret = -EAGAIN; | |
6406 | goto out; | |
1da177e4 | 6407 | } |
f0f09d3b | 6408 | |
1da177e4 LT |
6409 | pReq = (Config_t *)mf; |
6410 | pReq->Action = pCfg->action; | |
6411 | pReq->Reserved = 0; | |
6412 | pReq->ChainOffset = 0; | |
6413 | pReq->Function = MPI_FUNCTION_CONFIG; | |
69218ee5 CH |
6414 | |
6415 | /* Assume page type is not extended and clear "reserved" fields. */ | |
1da177e4 LT |
6416 | pReq->ExtPageLength = 0; |
6417 | pReq->ExtPageType = 0; | |
6418 | pReq->MsgFlags = 0; | |
69218ee5 | 6419 | |
1da177e4 LT |
6420 | for (ii=0; ii < 8; ii++) |
6421 | pReq->Reserved2[ii] = 0; | |
6422 | ||
69218ee5 CH |
6423 | pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion; |
6424 | pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength; | |
6425 | pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber; | |
6426 | pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK); | |
6427 | ||
6428 | if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) { | |
6429 | pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr; | |
6430 | pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength); | |
6431 | pReq->ExtPageType = pExtHdr->ExtPageType; | |
6432 | pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; | |
6433 | ||
f0f09d3b KD |
6434 | /* Page Length must be treated as a reserved field for the |
6435 | * extended header. | |
6436 | */ | |
69218ee5 CH |
6437 | pReq->Header.PageLength = 0; |
6438 | } | |
6439 | ||
1da177e4 LT |
6440 | pReq->PageAddress = cpu_to_le32(pCfg->pageAddr); |
6441 | ||
6442 | /* Add a SGE to the config request. | |
6443 | */ | |
6444 | if (pCfg->dir) | |
6445 | flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE; | |
6446 | else | |
6447 | flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; | |
6448 | ||
f0f09d3b KD |
6449 | if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == |
6450 | MPI_CONFIG_PAGETYPE_EXTENDED) { | |
69218ee5 | 6451 | flagsLength |= pExtHdr->ExtPageLength * 4; |
f0f09d3b KD |
6452 | page_type = pReq->ExtPageType; |
6453 | extend_page = 1; | |
6454 | } else { | |
69218ee5 | 6455 | flagsLength |= pCfg->cfghdr.hdr->PageLength * 4; |
f0f09d3b KD |
6456 | page_type = pReq->Header.PageType; |
6457 | extend_page = 0; | |
69218ee5 CH |
6458 | } |
6459 | ||
f0f09d3b KD |
6460 | dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
6461 | "Sending Config request type 0x%x, page 0x%x and action %d\n", | |
6462 | ioc->name, page_type, pReq->Header.PageNumber, pReq->Action)); | |
1da177e4 | 6463 | |
f0f09d3b KD |
6464 | ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr); |
6465 | timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout; | |
1da177e4 | 6466 | mpt_put_msg_frame(mpt_base_index, ioc, mf); |
f0f09d3b KD |
6467 | timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, |
6468 | timeout); | |
6469 | if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { | |
6470 | ret = -ETIME; | |
6471 | dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
6472 | "Failed Sending Config request type 0x%x, page 0x%x," | |
6473 | " action %d, status %xh, time left %ld\n\n", | |
6474 | ioc->name, page_type, pReq->Header.PageNumber, | |
6475 | pReq->Action, ioc->mptbase_cmds.status, timeleft)); | |
6476 | if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) | |
6477 | goto out; | |
98cbe371 | 6478 | if (!timeleft) { |
6479 | spin_lock_irqsave(&ioc->taskmgmt_lock, flags); | |
6480 | if (ioc->ioc_reset_in_progress) { | |
6481 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, | |
6482 | flags); | |
6483 | printk(MYIOC_s_INFO_FMT "%s: host reset in" | |
6484 | " progress mpt_config timed out.!!\n", | |
6485 | __func__, ioc->name); | |
83ff74e3 | 6486 | mutex_unlock(&ioc->mptbase_cmds.mutex); |
98cbe371 | 6487 | return -EFAULT; |
6488 | } | |
6489 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); | |
f0f09d3b | 6490 | issue_hard_reset = 1; |
98cbe371 | 6491 | } |
f0f09d3b KD |
6492 | goto out; |
6493 | } | |
1da177e4 | 6494 | |
f0f09d3b KD |
6495 | if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { |
6496 | ret = -1; | |
6497 | goto out; | |
6498 | } | |
6499 | pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply; | |
6500 | ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; | |
6501 | if (ret == MPI_IOCSTATUS_SUCCESS) { | |
6502 | if (extend_page) { | |
6503 | pCfg->cfghdr.ehdr->ExtPageLength = | |
6504 | le16_to_cpu(pReply->ExtPageLength); | |
6505 | pCfg->cfghdr.ehdr->ExtPageType = | |
6506 | pReply->ExtPageType; | |
6507 | } | |
6508 | pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion; | |
6509 | pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength; | |
6510 | pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber; | |
6511 | pCfg->cfghdr.hdr->PageType = pReply->Header.PageType; | |
1da177e4 | 6512 | |
f0f09d3b | 6513 | } |
1da177e4 | 6514 | |
f0f09d3b KD |
6515 | if (retry_count) |
6516 | printk(MYIOC_s_INFO_FMT "Retry completed " | |
6517 | "ret=0x%x timeleft=%ld\n", | |
6518 | ioc->name, ret, timeleft); | |
1da177e4 | 6519 | |
f0f09d3b KD |
6520 | dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n", |
6521 | ret, le32_to_cpu(pReply->IOCLogInfo))); | |
1da177e4 | 6522 | |
f0f09d3b | 6523 | out: |
1da177e4 | 6524 | |
f0f09d3b KD |
6525 | CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) |
6526 | mutex_unlock(&ioc->mptbase_cmds.mutex); | |
6527 | if (issue_hard_reset) { | |
6528 | issue_hard_reset = 0; | |
97009a29 KT |
6529 | printk(MYIOC_s_WARN_FMT |
6530 | "Issuing Reset from %s!!, doorbell=0x%08x\n", | |
6531 | ioc->name, __func__, mpt_GetIocState(ioc, 0)); | |
b3b97316 KD |
6532 | if (retry_count == 0) { |
6533 | if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0) | |
6534 | retry_count++; | |
6535 | } else | |
6536 | mpt_HardResetHandler(ioc, CAN_SLEEP); | |
6537 | ||
f0f09d3b KD |
6538 | mpt_free_msg_frame(ioc, mf); |
6539 | /* attempt one retry for a timed out command */ | |
b3b97316 | 6540 | if (retry_count < 2) { |
f0f09d3b KD |
6541 | printk(MYIOC_s_INFO_FMT |
6542 | "Attempting Retry Config request" | |
6543 | " type 0x%x, page 0x%x," | |
6544 | " action %d\n", ioc->name, page_type, | |
6545 | pCfg->cfghdr.hdr->PageNumber, pCfg->action); | |
6546 | retry_count++; | |
6547 | goto retry_config; | |
6548 | } | |
6549 | } | |
6550 | return ret; | |
1da177e4 | 6551 | |
1da177e4 LT |
6552 | } |
6553 | ||
6554 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 6555 | /** |
1da177e4 LT |
6556 | * mpt_ioc_reset - Base cleanup for hard reset |
6557 | * @ioc: Pointer to the adapter structure | |
6558 | * @reset_phase: Indicates pre- or post-reset functionality | |
6559 | * | |
d9489fb6 | 6560 | * Remark: Frees resources with internally generated commands. |
1da177e4 LT |
6561 | */ |
6562 | static int | |
6563 | mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) | |
6564 | { | |
f0f09d3b KD |
6565 | switch (reset_phase) { |
6566 | case MPT_IOC_SETUP_RESET: | |
e7deff33 | 6567 | ioc->taskmgmt_quiesce_io = 1; |
f0f09d3b KD |
6568 | dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
6569 | "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); | |
6570 | break; | |
6571 | case MPT_IOC_PRE_RESET: | |
6572 | dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
6573 | "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); | |
6574 | break; | |
6575 | case MPT_IOC_POST_RESET: | |
6576 | dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
6577 | "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); | |
6578 | /* wake up mptbase_cmds */ | |
6579 | if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { | |
6580 | ioc->mptbase_cmds.status |= | |
6581 | MPT_MGMT_STATUS_DID_IOCRESET; | |
6582 | complete(&ioc->mptbase_cmds.done); | |
1da177e4 | 6583 | } |
2f187862 KD |
6584 | /* wake up taskmgmt_cmds */ |
6585 | if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { | |
6586 | ioc->taskmgmt_cmds.status |= | |
6587 | MPT_MGMT_STATUS_DID_IOCRESET; | |
6588 | complete(&ioc->taskmgmt_cmds.done); | |
6589 | } | |
f0f09d3b KD |
6590 | break; |
6591 | default: | |
6592 | break; | |
1da177e4 LT |
6593 | } |
6594 | ||
6595 | return 1; /* currently means nothing really */ | |
6596 | } | |
6597 | ||
6598 | ||
6599 | #ifdef CONFIG_PROC_FS /* { */ | |
6600 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
6601 | /* | |
6602 | * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff... | |
6603 | */ | |
6604 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 6605 | /** |
1da177e4 LT |
6606 | * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries. |
6607 | * | |
6608 | * Returns 0 for success, non-zero for failure. | |
6609 | */ | |
6610 | static int | |
6611 | procmpt_create(void) | |
6612 | { | |
1da177e4 LT |
6613 | mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL); |
6614 | if (mpt_proc_root_dir == NULL) | |
6615 | return -ENOTDIR; | |
6616 | ||
eb6edad3 AD |
6617 | proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops); |
6618 | proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops); | |
1da177e4 LT |
6619 | return 0; |
6620 | } | |
6621 | ||
6622 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 6623 | /** |
1da177e4 LT |
6624 | * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries. |
6625 | * | |
6626 | * Returns 0 for success, non-zero for failure. | |
6627 | */ | |
6628 | static void | |
6629 | procmpt_destroy(void) | |
6630 | { | |
6631 | remove_proc_entry("version", mpt_proc_root_dir); | |
6632 | remove_proc_entry("summary", mpt_proc_root_dir); | |
6633 | remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL); | |
6634 | } | |
6635 | ||
6636 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1f5cfe2f | 6637 | /* |
d9489fb6 | 6638 | * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary. |
1da177e4 | 6639 | */ |
eb6edad3 | 6640 | static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan); |
1da177e4 | 6641 | |
eb6edad3 AD |
6642 | static int mpt_summary_proc_show(struct seq_file *m, void *v) |
6643 | { | |
6644 | MPT_ADAPTER *ioc = m->private; | |
1da177e4 | 6645 | |
eb6edad3 AD |
6646 | if (ioc) { |
6647 | seq_mpt_print_ioc_summary(ioc, m, 1); | |
1da177e4 LT |
6648 | } else { |
6649 | list_for_each_entry(ioc, &ioc_list, list) { | |
eb6edad3 | 6650 | seq_mpt_print_ioc_summary(ioc, m, 1); |
1da177e4 LT |
6651 | } |
6652 | } | |
6653 | ||
eb6edad3 AD |
6654 | return 0; |
6655 | } | |
1da177e4 | 6656 | |
eb6edad3 AD |
6657 | static int mpt_summary_proc_open(struct inode *inode, struct file *file) |
6658 | { | |
d9dda78b | 6659 | return single_open(file, mpt_summary_proc_show, PDE_DATA(inode)); |
1da177e4 LT |
6660 | } |
6661 | ||
eb6edad3 AD |
6662 | static const struct file_operations mpt_summary_proc_fops = { |
6663 | .owner = THIS_MODULE, | |
6664 | .open = mpt_summary_proc_open, | |
6665 | .read = seq_read, | |
6666 | .llseek = seq_lseek, | |
6667 | .release = single_release, | |
6668 | }; | |
6669 | ||
6670 | static int mpt_version_proc_show(struct seq_file *m, void *v) | |
1da177e4 | 6671 | { |
f606f571 | 6672 | u8 cb_idx; |
7fadc87e | 6673 | int scsi, fc, sas, lan, ctl, targ, dmp; |
1da177e4 | 6674 | char *drvname; |
1da177e4 | 6675 | |
eb6edad3 AD |
6676 | seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON); |
6677 | seq_printf(m, " Fusion MPT base driver\n"); | |
1da177e4 | 6678 | |
7fadc87e | 6679 | scsi = fc = sas = lan = ctl = targ = dmp = 0; |
8d6d83e9 | 6680 | for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
1da177e4 | 6681 | drvname = NULL; |
f606f571 PS |
6682 | if (MptCallbacks[cb_idx]) { |
6683 | switch (MptDriverClass[cb_idx]) { | |
7fadc87e MED |
6684 | case MPTSPI_DRIVER: |
6685 | if (!scsi++) drvname = "SPI host"; | |
6686 | break; | |
6687 | case MPTFC_DRIVER: | |
6688 | if (!fc++) drvname = "FC host"; | |
6689 | break; | |
6690 | case MPTSAS_DRIVER: | |
6691 | if (!sas++) drvname = "SAS host"; | |
1da177e4 LT |
6692 | break; |
6693 | case MPTLAN_DRIVER: | |
6694 | if (!lan++) drvname = "LAN"; | |
6695 | break; | |
6696 | case MPTSTM_DRIVER: | |
6697 | if (!targ++) drvname = "SCSI target"; | |
6698 | break; | |
6699 | case MPTCTL_DRIVER: | |
6700 | if (!ctl++) drvname = "ioctl"; | |
6701 | break; | |
6702 | } | |
6703 | ||
6704 | if (drvname) | |
eb6edad3 | 6705 | seq_printf(m, " Fusion MPT %s driver\n", drvname); |
1da177e4 LT |
6706 | } |
6707 | } | |
6708 | ||
eb6edad3 AD |
6709 | return 0; |
6710 | } | |
6711 | ||
6712 | static int mpt_version_proc_open(struct inode *inode, struct file *file) | |
6713 | { | |
6714 | return single_open(file, mpt_version_proc_show, NULL); | |
1da177e4 LT |
6715 | } |
6716 | ||
eb6edad3 AD |
6717 | static const struct file_operations mpt_version_proc_fops = { |
6718 | .owner = THIS_MODULE, | |
6719 | .open = mpt_version_proc_open, | |
6720 | .read = seq_read, | |
6721 | .llseek = seq_lseek, | |
6722 | .release = single_release, | |
6723 | }; | |
6724 | ||
6725 | static int mpt_iocinfo_proc_show(struct seq_file *m, void *v) | |
1da177e4 | 6726 | { |
eb6edad3 | 6727 | MPT_ADAPTER *ioc = m->private; |
1da177e4 LT |
6728 | char expVer[32]; |
6729 | int sz; | |
6730 | int p; | |
6731 | ||
6732 | mpt_get_fw_exp_ver(expVer, ioc); | |
6733 | ||
eb6edad3 | 6734 | seq_printf(m, "%s:", ioc->name); |
1da177e4 | 6735 | if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) |
eb6edad3 | 6736 | seq_printf(m, " (f/w download boot flag set)"); |
1da177e4 | 6737 | // if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL) |
eb6edad3 | 6738 | // seq_printf(m, " CONFIG_CHECKSUM_FAIL!"); |
1da177e4 | 6739 | |
eb6edad3 | 6740 | seq_printf(m, "\n ProductID = 0x%04x (%s)\n", |
1da177e4 LT |
6741 | ioc->facts.ProductID, |
6742 | ioc->prod_name); | |
eb6edad3 | 6743 | seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer); |
1da177e4 | 6744 | if (ioc->facts.FWImageSize) |
eb6edad3 AD |
6745 | seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize); |
6746 | seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion); | |
6747 | seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit); | |
6748 | seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState); | |
1da177e4 | 6749 | |
eb6edad3 | 6750 | seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n", |
1da177e4 | 6751 | ioc->facts.CurrentHostMfaHighAddr); |
eb6edad3 | 6752 | seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n", |
1da177e4 LT |
6753 | ioc->facts.CurrentSenseBufferHighAddr); |
6754 | ||
eb6edad3 AD |
6755 | seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth); |
6756 | seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize); | |
1da177e4 | 6757 | |
eb6edad3 | 6758 | seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n", |
1da177e4 LT |
6759 | (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma); |
6760 | /* | |
6761 | * Rounding UP to nearest 4-kB boundary here... | |
6762 | */ | |
6763 | sz = (ioc->req_sz * ioc->req_depth) + 128; | |
6764 | sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000; | |
eb6edad3 | 6765 | seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n", |
1da177e4 | 6766 | ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz); |
eb6edad3 | 6767 | seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n", |
1da177e4 LT |
6768 | 4*ioc->facts.RequestFrameSize, |
6769 | ioc->facts.GlobalCredits); | |
6770 | ||
eb6edad3 | 6771 | seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n", |
1da177e4 LT |
6772 | (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma); |
6773 | sz = (ioc->reply_sz * ioc->reply_depth) + 128; | |
eb6edad3 | 6774 | seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n", |
1da177e4 | 6775 | ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz); |
eb6edad3 | 6776 | seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n", |
1da177e4 LT |
6777 | ioc->facts.CurReplyFrameSize, |
6778 | ioc->facts.ReplyQueueDepth); | |
6779 | ||
eb6edad3 | 6780 | seq_printf(m, " MaxDevices = %d\n", |
1da177e4 | 6781 | (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices); |
eb6edad3 | 6782 | seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses); |
1da177e4 LT |
6783 | |
6784 | /* per-port info */ | |
6785 | for (p=0; p < ioc->facts.NumberOfPorts; p++) { | |
eb6edad3 | 6786 | seq_printf(m, " PortNumber = %d (of %d)\n", |
1da177e4 LT |
6787 | p+1, |
6788 | ioc->facts.NumberOfPorts); | |
6789 | if (ioc->bus_type == FC) { | |
6790 | if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { | |
6791 | u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; | |
eb6edad3 | 6792 | seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n", |
1da177e4 LT |
6793 | a[5], a[4], a[3], a[2], a[1], a[0]); |
6794 | } | |
eb6edad3 | 6795 | seq_printf(m, " WWN = %08X%08X:%08X%08X\n", |
1da177e4 LT |
6796 | ioc->fc_port_page0[p].WWNN.High, |
6797 | ioc->fc_port_page0[p].WWNN.Low, | |
6798 | ioc->fc_port_page0[p].WWPN.High, | |
6799 | ioc->fc_port_page0[p].WWPN.Low); | |
6800 | } | |
6801 | } | |
6802 | ||
eb6edad3 AD |
6803 | return 0; |
6804 | } | |
6805 | ||
6806 | static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file) | |
6807 | { | |
d9dda78b | 6808 | return single_open(file, mpt_iocinfo_proc_show, PDE_DATA(inode)); |
1da177e4 LT |
6809 | } |
6810 | ||
eb6edad3 AD |
6811 | static const struct file_operations mpt_iocinfo_proc_fops = { |
6812 | .owner = THIS_MODULE, | |
6813 | .open = mpt_iocinfo_proc_open, | |
6814 | .read = seq_read, | |
6815 | .llseek = seq_lseek, | |
6816 | .release = single_release, | |
6817 | }; | |
1da177e4 LT |
6818 | #endif /* CONFIG_PROC_FS } */ |
6819 | ||
6820 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
6821 | static void | |
6822 | mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc) | |
6823 | { | |
6824 | buf[0] ='\0'; | |
6825 | if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) { | |
6826 | sprintf(buf, " (Exp %02d%02d)", | |
6827 | (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */ | |
6828 | (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */ | |
6829 | ||
6830 | /* insider hack! */ | |
6831 | if ((ioc->facts.FWVersion.Word >> 8) & 0x80) | |
6832 | strcat(buf, " [MDBG]"); | |
6833 | } | |
6834 | } | |
6835 | ||
6836 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
6837 | /** | |
6838 | * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer. | |
6839 | * @ioc: Pointer to MPT_ADAPTER structure | |
6840 | * @buffer: Pointer to buffer where IOC summary info should be written | |
6841 | * @size: Pointer to number of bytes we wrote (set by this routine) | |
6842 | * @len: Offset at which to start writing in buffer | |
6843 | * @showlan: Display LAN stuff? | |
6844 | * | |
6845 | * This routine writes (english readable) ASCII text, which represents | |
6846 | * a summary of IOC information, to a buffer. | |
6847 | */ | |
6848 | void | |
6849 | mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan) | |
6850 | { | |
6851 | char expVer[32]; | |
6852 | int y; | |
6853 | ||
6854 | mpt_get_fw_exp_ver(expVer, ioc); | |
6855 | ||
6856 | /* | |
6857 | * Shorter summary of attached ioc's... | |
6858 | */ | |
6859 | y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", | |
6860 | ioc->name, | |
6861 | ioc->prod_name, | |
6862 | MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ | |
6863 | ioc->facts.FWVersion.Word, | |
6864 | expVer, | |
6865 | ioc->facts.NumberOfPorts, | |
6866 | ioc->req_depth); | |
6867 | ||
6868 | if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { | |
6869 | u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; | |
6870 | y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X", | |
6871 | a[5], a[4], a[3], a[2], a[1], a[0]); | |
6872 | } | |
6873 | ||
1da177e4 | 6874 | y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq); |
1da177e4 LT |
6875 | |
6876 | if (!ioc->active) | |
6877 | y += sprintf(buffer+len+y, " (disabled)"); | |
6878 | ||
6879 | y += sprintf(buffer+len+y, "\n"); | |
6880 | ||
6881 | *size = y; | |
6882 | } | |
eb6edad3 AD |
6883 | |
6884 | static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan) | |
6885 | { | |
6886 | char expVer[32]; | |
6887 | ||
6888 | mpt_get_fw_exp_ver(expVer, ioc); | |
6889 | ||
6890 | /* | |
6891 | * Shorter summary of attached ioc's... | |
6892 | */ | |
6893 | seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", | |
6894 | ioc->name, | |
6895 | ioc->prod_name, | |
6896 | MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ | |
6897 | ioc->facts.FWVersion.Word, | |
6898 | expVer, | |
6899 | ioc->facts.NumberOfPorts, | |
6900 | ioc->req_depth); | |
6901 | ||
6902 | if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { | |
6903 | u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; | |
6904 | seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X", | |
6905 | a[5], a[4], a[3], a[2], a[1], a[0]); | |
6906 | } | |
6907 | ||
6908 | seq_printf(m, ", IRQ=%d", ioc->pci_irq); | |
6909 | ||
6910 | if (!ioc->active) | |
6911 | seq_printf(m, " (disabled)"); | |
6912 | ||
6913 | seq_putc(m, '\n'); | |
6914 | } | |
6915 | ||
1ba9ab2e | 6916 | /** |
3dbda77e | 6917 | * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management |
1ba9ab2e KD |
6918 | * @ioc: Pointer to MPT_ADAPTER structure |
6919 | * | |
6920 | * Returns 0 for SUCCESS or -1 if FAILED. | |
6921 | * | |
6922 | * If -1 is return, then it was not possible to set the flags | |
6923 | **/ | |
6924 | int | |
6925 | mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) | |
6926 | { | |
6927 | unsigned long flags; | |
6928 | int retval; | |
6929 | ||
6930 | spin_lock_irqsave(&ioc->taskmgmt_lock, flags); | |
6931 | if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress || | |
6932 | (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) { | |
6933 | retval = -1; | |
6934 | goto out; | |
6935 | } | |
6936 | retval = 0; | |
6937 | ioc->taskmgmt_in_progress = 1; | |
e7deff33 KD |
6938 | ioc->taskmgmt_quiesce_io = 1; |
6939 | if (ioc->alt_ioc) { | |
1ba9ab2e | 6940 | ioc->alt_ioc->taskmgmt_in_progress = 1; |
e7deff33 KD |
6941 | ioc->alt_ioc->taskmgmt_quiesce_io = 1; |
6942 | } | |
1ba9ab2e KD |
6943 | out: |
6944 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); | |
6945 | return retval; | |
6946 | } | |
6947 | EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag); | |
6948 | ||
6949 | /** | |
3dbda77e | 6950 | * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management |
1ba9ab2e KD |
6951 | * @ioc: Pointer to MPT_ADAPTER structure |
6952 | * | |
6953 | **/ | |
6954 | void | |
6955 | mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) | |
6956 | { | |
6957 | unsigned long flags; | |
6958 | ||
6959 | spin_lock_irqsave(&ioc->taskmgmt_lock, flags); | |
6960 | ioc->taskmgmt_in_progress = 0; | |
e7deff33 KD |
6961 | ioc->taskmgmt_quiesce_io = 0; |
6962 | if (ioc->alt_ioc) { | |
1ba9ab2e | 6963 | ioc->alt_ioc->taskmgmt_in_progress = 0; |
e7deff33 KD |
6964 | ioc->alt_ioc->taskmgmt_quiesce_io = 0; |
6965 | } | |
1ba9ab2e KD |
6966 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
6967 | } | |
6968 | EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag); | |
1da177e4 | 6969 | |
2f4c782c KD |
6970 | |
6971 | /** | |
6972 | * mpt_halt_firmware - Halts the firmware if it is operational and panic | |
6973 | * the kernel | |
6974 | * @ioc: Pointer to MPT_ADAPTER structure | |
6975 | * | |
6976 | **/ | |
6977 | void | |
6978 | mpt_halt_firmware(MPT_ADAPTER *ioc) | |
6979 | { | |
6980 | u32 ioc_raw_state; | |
6981 | ||
6982 | ioc_raw_state = mpt_GetIocState(ioc, 0); | |
6983 | ||
6984 | if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { | |
6985 | printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n", | |
6986 | ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); | |
6987 | panic("%s: IOC Fault (%04xh)!!!\n", ioc->name, | |
6988 | ioc_raw_state & MPI_DOORBELL_DATA_MASK); | |
6989 | } else { | |
6990 | CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00); | |
6991 | panic("%s: Firmware is halted due to command timeout\n", | |
6992 | ioc->name); | |
6993 | } | |
6994 | } | |
6995 | EXPORT_SYMBOL(mpt_halt_firmware); | |
6996 | ||
d0f698c4 KD |
6997 | /** |
6998 | * mpt_SoftResetHandler - Issues a less expensive reset | |
6999 | * @ioc: Pointer to MPT_ADAPTER structure | |
7000 | * @sleepFlag: Indicates if sleep or schedule must be called. | |
d0f698c4 KD |
7001 | * |
7002 | * Returns 0 for SUCCESS or -1 if FAILED. | |
7003 | * | |
7004 | * Message Unit Reset - instructs the IOC to reset the Reply Post and | |
7005 | * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. | |
7006 | * All posted buffers are freed, and event notification is turned off. | |
25985edc | 7007 | * IOC doesn't reply to any outstanding request. This will transfer IOC |
d0f698c4 KD |
7008 | * to READY state. |
7009 | **/ | |
7010 | int | |
7011 | mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag) | |
7012 | { | |
7013 | int rc; | |
7014 | int ii; | |
7015 | u8 cb_idx; | |
7016 | unsigned long flags; | |
7017 | u32 ioc_state; | |
7018 | unsigned long time_count; | |
7019 | ||
7020 | dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n", | |
7021 | ioc->name)); | |
7022 | ||
7023 | ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; | |
7024 | ||
7025 | if (mpt_fwfault_debug) | |
7026 | mpt_halt_firmware(ioc); | |
7027 | ||
7028 | if (ioc_state == MPI_IOC_STATE_FAULT || | |
7029 | ioc_state == MPI_IOC_STATE_RESET) { | |
7030 | dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
7031 | "skipping, either in FAULT or RESET state!\n", ioc->name)); | |
7032 | return -1; | |
7033 | } | |
7034 | ||
7035 | if (ioc->bus_type == FC) { | |
7036 | dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
7037 | "skipping, because the bus type is FC!\n", ioc->name)); | |
7038 | return -1; | |
7039 | } | |
7040 | ||
7041 | spin_lock_irqsave(&ioc->taskmgmt_lock, flags); | |
7042 | if (ioc->ioc_reset_in_progress) { | |
7043 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); | |
7044 | return -1; | |
7045 | } | |
7046 | ioc->ioc_reset_in_progress = 1; | |
7047 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); | |
7048 | ||
7049 | rc = -1; | |
7050 | ||
7051 | for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { | |
7052 | if (MptResetHandlers[cb_idx]) | |
7053 | mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); | |
7054 | } | |
7055 | ||
7056 | spin_lock_irqsave(&ioc->taskmgmt_lock, flags); | |
7057 | if (ioc->taskmgmt_in_progress) { | |
b9a0f872 | 7058 | ioc->ioc_reset_in_progress = 0; |
d0f698c4 KD |
7059 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); |
7060 | return -1; | |
7061 | } | |
7062 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); | |
7063 | /* Disable reply interrupts (also blocks FreeQ) */ | |
7064 | CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); | |
7065 | ioc->active = 0; | |
7066 | time_count = jiffies; | |
7067 | ||
7068 | rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); | |
7069 | ||
7070 | for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { | |
7071 | if (MptResetHandlers[cb_idx]) | |
7072 | mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET); | |
7073 | } | |
7074 | ||
7075 | if (rc) | |
7076 | goto out; | |
7077 | ||
7078 | ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; | |
7079 | if (ioc_state != MPI_IOC_STATE_READY) | |
7080 | goto out; | |
7081 | ||
7082 | for (ii = 0; ii < 5; ii++) { | |
7083 | /* Get IOC facts! Allow 5 retries */ | |
7084 | rc = GetIocFacts(ioc, sleepFlag, | |
7085 | MPT_HOSTEVENT_IOC_RECOVER); | |
7086 | if (rc == 0) | |
7087 | break; | |
7088 | if (sleepFlag == CAN_SLEEP) | |
7089 | msleep(100); | |
7090 | else | |
7091 | mdelay(100); | |
7092 | } | |
7093 | if (ii == 5) | |
7094 | goto out; | |
7095 | ||
7096 | rc = PrimeIocFifos(ioc); | |
7097 | if (rc != 0) | |
7098 | goto out; | |
7099 | ||
7100 | rc = SendIocInit(ioc, sleepFlag); | |
7101 | if (rc != 0) | |
7102 | goto out; | |
7103 | ||
7104 | rc = SendEventNotification(ioc, 1, sleepFlag); | |
7105 | if (rc != 0) | |
7106 | goto out; | |
7107 | ||
7108 | if (ioc->hard_resets < -1) | |
7109 | ioc->hard_resets++; | |
7110 | ||
7111 | /* | |
7112 | * At this point, we know soft reset succeeded. | |
7113 | */ | |
7114 | ||
7115 | ioc->active = 1; | |
7116 | CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); | |
7117 | ||
7118 | out: | |
7119 | spin_lock_irqsave(&ioc->taskmgmt_lock, flags); | |
7120 | ioc->ioc_reset_in_progress = 0; | |
7121 | ioc->taskmgmt_quiesce_io = 0; | |
7122 | ioc->taskmgmt_in_progress = 0; | |
7123 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); | |
7124 | ||
7125 | if (ioc->active) { /* otherwise, hard reset coming */ | |
7126 | for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { | |
7127 | if (MptResetHandlers[cb_idx]) | |
7128 | mpt_signal_reset(cb_idx, ioc, | |
7129 | MPT_IOC_POST_RESET); | |
7130 | } | |
7131 | } | |
7132 | ||
7133 | dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
7134 | "SoftResetHandler: completed (%d seconds): %s\n", | |
7135 | ioc->name, jiffies_to_msecs(jiffies - time_count)/1000, | |
7136 | ((rc == 0) ? "SUCCESS" : "FAILED"))); | |
7137 | ||
7138 | return rc; | |
7139 | } | |
7140 | ||
7141 | /** | |
7142 | * mpt_Soft_Hard_ResetHandler - Try less expensive reset | |
7143 | * @ioc: Pointer to MPT_ADAPTER structure | |
7144 | * @sleepFlag: Indicates if sleep or schedule must be called. | |
d0f698c4 KD |
7145 | * |
7146 | * Returns 0 for SUCCESS or -1 if FAILED. | |
7147 | * Try for softreset first, only if it fails go for expensive | |
7148 | * HardReset. | |
7149 | **/ | |
7150 | int | |
7151 | mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) { | |
7152 | int ret = -1; | |
7153 | ||
7154 | ret = mpt_SoftResetHandler(ioc, sleepFlag); | |
7155 | if (ret == 0) | |
7156 | return ret; | |
7157 | ret = mpt_HardResetHandler(ioc, sleepFlag); | |
7158 | return ret; | |
7159 | } | |
7160 | EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler); | |
7161 | ||
1da177e4 LT |
7162 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
7163 | /* | |
7164 | * Reset Handling | |
7165 | */ | |
7166 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
7167 | /** | |
d9489fb6 | 7168 | * mpt_HardResetHandler - Generic reset handler |
1da177e4 LT |
7169 | * @ioc: Pointer to MPT_ADAPTER structure |
7170 | * @sleepFlag: Indicates if sleep or schedule must be called. | |
7171 | * | |
d9489fb6 RD |
7172 | * Issues SCSI Task Management call based on input arg values. |
7173 | * If TaskMgmt fails, returns associated SCSI request. | |
7174 | * | |
1da177e4 LT |
7175 | * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) |
7176 | * or a non-interrupt thread. In the former, must not call schedule(). | |
7177 | * | |
d9489fb6 | 7178 | * Note: A return of -1 is a FATAL error case, as it means a |
1da177e4 LT |
7179 | * FW reload/initialization failed. |
7180 | * | |
7181 | * Returns 0 for SUCCESS or -1 if FAILED. | |
7182 | */ | |
7183 | int | |
7184 | mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) | |
7185 | { | |
d1306917 | 7186 | int rc; |
2f187862 | 7187 | u8 cb_idx; |
1da177e4 | 7188 | unsigned long flags; |
2f187862 | 7189 | unsigned long time_count; |
1da177e4 | 7190 | |
436ace72 | 7191 | dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name)); |
1da177e4 LT |
7192 | #ifdef MFCNT |
7193 | printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name); | |
7194 | printk("MF count 0x%x !\n", ioc->mfcnt); | |
7195 | #endif | |
2f4c782c KD |
7196 | if (mpt_fwfault_debug) |
7197 | mpt_halt_firmware(ioc); | |
1da177e4 LT |
7198 | |
7199 | /* Reset the adapter. Prevent more than 1 call to | |
7200 | * mpt_do_ioc_recovery at any instant in time. | |
7201 | */ | |
1ba9ab2e KD |
7202 | spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
7203 | if (ioc->ioc_reset_in_progress) { | |
7204 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); | |
98cbe371 | 7205 | ioc->wait_on_reset_completion = 1; |
7206 | do { | |
7207 | ssleep(1); | |
7208 | } while (ioc->ioc_reset_in_progress == 1); | |
7209 | ioc->wait_on_reset_completion = 0; | |
7210 | return ioc->reset_status; | |
7211 | } | |
7212 | if (ioc->wait_on_reset_completion) { | |
7213 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); | |
7214 | rc = 0; | |
7215 | time_count = jiffies; | |
7216 | goto exit; | |
1da177e4 | 7217 | } |
1ba9ab2e KD |
7218 | ioc->ioc_reset_in_progress = 1; |
7219 | if (ioc->alt_ioc) | |
7220 | ioc->alt_ioc->ioc_reset_in_progress = 1; | |
7221 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); | |
1da177e4 | 7222 | |
1da177e4 LT |
7223 | |
7224 | /* The SCSI driver needs to adjust timeouts on all current | |
7225 | * commands prior to the diagnostic reset being issued. | |
80f7228b | 7226 | * Prevents timeouts occurring during a diagnostic reset...very bad. |
1da177e4 LT |
7227 | * For all other protocol drivers, this is a no-op. |
7228 | */ | |
2f187862 KD |
7229 | for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
7230 | if (MptResetHandlers[cb_idx]) { | |
7231 | mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); | |
7232 | if (ioc->alt_ioc) | |
7233 | mpt_signal_reset(cb_idx, ioc->alt_ioc, | |
7234 | MPT_IOC_SETUP_RESET); | |
1da177e4 LT |
7235 | } |
7236 | } | |
7237 | ||
2f187862 KD |
7238 | time_count = jiffies; |
7239 | rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag); | |
7240 | if (rc != 0) { | |
7241 | printk(KERN_WARNING MYNAM | |
97009a29 KT |
7242 | ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n", |
7243 | rc, ioc->name, mpt_GetIocState(ioc, 0)); | |
2f187862 KD |
7244 | } else { |
7245 | if (ioc->hard_resets < -1) | |
7246 | ioc->hard_resets++; | |
1da177e4 | 7247 | } |
1da177e4 | 7248 | |
1ba9ab2e KD |
7249 | spin_lock_irqsave(&ioc->taskmgmt_lock, flags); |
7250 | ioc->ioc_reset_in_progress = 0; | |
e7deff33 | 7251 | ioc->taskmgmt_quiesce_io = 0; |
1ba9ab2e | 7252 | ioc->taskmgmt_in_progress = 0; |
98cbe371 | 7253 | ioc->reset_status = rc; |
1ba9ab2e KD |
7254 | if (ioc->alt_ioc) { |
7255 | ioc->alt_ioc->ioc_reset_in_progress = 0; | |
e7deff33 | 7256 | ioc->alt_ioc->taskmgmt_quiesce_io = 0; |
1ba9ab2e KD |
7257 | ioc->alt_ioc->taskmgmt_in_progress = 0; |
7258 | } | |
7259 | spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); | |
1da177e4 | 7260 | |
d1306917 KD |
7261 | for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
7262 | if (MptResetHandlers[cb_idx]) { | |
7263 | mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET); | |
7264 | if (ioc->alt_ioc) | |
7265 | mpt_signal_reset(cb_idx, | |
7266 | ioc->alt_ioc, MPT_IOC_POST_RESET); | |
7267 | } | |
7268 | } | |
98cbe371 | 7269 | exit: |
2f187862 KD |
7270 | dtmprintk(ioc, |
7271 | printk(MYIOC_s_DEBUG_FMT | |
7272 | "HardResetHandler: completed (%d seconds): %s\n", ioc->name, | |
7273 | jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ? | |
7274 | "SUCCESS" : "FAILED"))); | |
1da177e4 LT |
7275 | |
7276 | return rc; | |
7277 | } | |
7278 | ||
2f187862 | 7279 | #ifdef CONFIG_FUSION_LOGGING |
82ffb671 | 7280 | static void |
2f187862 | 7281 | mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply) |
1da177e4 | 7282 | { |
509e5e5d | 7283 | char *ds = NULL; |
2f187862 KD |
7284 | u32 evData0; |
7285 | int ii; | |
7286 | u8 event; | |
7287 | char *evStr = ioc->evStr; | |
7288 | ||
7289 | event = le32_to_cpu(pEventReply->Event) & 0xFF; | |
7290 | evData0 = le32_to_cpu(pEventReply->Data[0]); | |
1da177e4 LT |
7291 | |
7292 | switch(event) { | |
7293 | case MPI_EVENT_NONE: | |
7294 | ds = "None"; | |
7295 | break; | |
7296 | case MPI_EVENT_LOG_DATA: | |
7297 | ds = "Log Data"; | |
7298 | break; | |
7299 | case MPI_EVENT_STATE_CHANGE: | |
7300 | ds = "State Change"; | |
7301 | break; | |
7302 | case MPI_EVENT_UNIT_ATTENTION: | |
7303 | ds = "Unit Attention"; | |
7304 | break; | |
7305 | case MPI_EVENT_IOC_BUS_RESET: | |
7306 | ds = "IOC Bus Reset"; | |
7307 | break; | |
7308 | case MPI_EVENT_EXT_BUS_RESET: | |
7309 | ds = "External Bus Reset"; | |
7310 | break; | |
7311 | case MPI_EVENT_RESCAN: | |
7312 | ds = "Bus Rescan Event"; | |
1da177e4 LT |
7313 | break; |
7314 | case MPI_EVENT_LINK_STATUS_CHANGE: | |
7315 | if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE) | |
7316 | ds = "Link Status(FAILURE) Change"; | |
7317 | else | |
7318 | ds = "Link Status(ACTIVE) Change"; | |
7319 | break; | |
7320 | case MPI_EVENT_LOOP_STATE_CHANGE: | |
7321 | if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP) | |
7322 | ds = "Loop State(LIP) Change"; | |
7323 | else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE) | |
2f187862 | 7324 | ds = "Loop State(LPE) Change"; |
1da177e4 | 7325 | else |
2f187862 | 7326 | ds = "Loop State(LPB) Change"; |
1da177e4 LT |
7327 | break; |
7328 | case MPI_EVENT_LOGOUT: | |
7329 | ds = "Logout"; | |
7330 | break; | |
7331 | case MPI_EVENT_EVENT_CHANGE: | |
7332 | if (evData0) | |
4f766dc6 | 7333 | ds = "Events ON"; |
1da177e4 | 7334 | else |
4f766dc6 | 7335 | ds = "Events OFF"; |
1da177e4 LT |
7336 | break; |
7337 | case MPI_EVENT_INTEGRATED_RAID: | |
82ffb671 CH |
7338 | { |
7339 | u8 ReasonCode = (u8)(evData0 >> 16); | |
7340 | switch (ReasonCode) { | |
7341 | case MPI_EVENT_RAID_RC_VOLUME_CREATED : | |
7342 | ds = "Integrated Raid: Volume Created"; | |
7343 | break; | |
7344 | case MPI_EVENT_RAID_RC_VOLUME_DELETED : | |
7345 | ds = "Integrated Raid: Volume Deleted"; | |
7346 | break; | |
7347 | case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED : | |
7348 | ds = "Integrated Raid: Volume Settings Changed"; | |
7349 | break; | |
7350 | case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED : | |
7351 | ds = "Integrated Raid: Volume Status Changed"; | |
7352 | break; | |
7353 | case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED : | |
7354 | ds = "Integrated Raid: Volume Physdisk Changed"; | |
7355 | break; | |
7356 | case MPI_EVENT_RAID_RC_PHYSDISK_CREATED : | |
7357 | ds = "Integrated Raid: Physdisk Created"; | |
7358 | break; | |
7359 | case MPI_EVENT_RAID_RC_PHYSDISK_DELETED : | |
7360 | ds = "Integrated Raid: Physdisk Deleted"; | |
7361 | break; | |
7362 | case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED : | |
7363 | ds = "Integrated Raid: Physdisk Settings Changed"; | |
7364 | break; | |
7365 | case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED : | |
7366 | ds = "Integrated Raid: Physdisk Status Changed"; | |
7367 | break; | |
7368 | case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED : | |
7369 | ds = "Integrated Raid: Domain Validation Needed"; | |
7370 | break; | |
7371 | case MPI_EVENT_RAID_RC_SMART_DATA : | |
7372 | ds = "Integrated Raid; Smart Data"; | |
7373 | break; | |
7374 | case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED : | |
7375 | ds = "Integrated Raid: Replace Action Started"; | |
7376 | break; | |
7377 | default: | |
7378 | ds = "Integrated Raid"; | |
1da177e4 | 7379 | break; |
82ffb671 CH |
7380 | } |
7381 | break; | |
7382 | } | |
7383 | case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: | |
7384 | ds = "SCSI Device Status Change"; | |
7385 | break; | |
7386 | case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: | |
7387 | { | |
3a892bef | 7388 | u8 id = (u8)(evData0); |
c6c727a1 | 7389 | u8 channel = (u8)(evData0 >> 8); |
82ffb671 CH |
7390 | u8 ReasonCode = (u8)(evData0 >> 16); |
7391 | switch (ReasonCode) { | |
7392 | case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: | |
509e5e5d | 7393 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
c6c727a1 EM |
7394 | "SAS Device Status Change: Added: " |
7395 | "id=%d channel=%d", id, channel); | |
82ffb671 CH |
7396 | break; |
7397 | case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: | |
509e5e5d | 7398 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
c6c727a1 EM |
7399 | "SAS Device Status Change: Deleted: " |
7400 | "id=%d channel=%d", id, channel); | |
82ffb671 CH |
7401 | break; |
7402 | case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: | |
509e5e5d | 7403 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
c6c727a1 EM |
7404 | "SAS Device Status Change: SMART Data: " |
7405 | "id=%d channel=%d", id, channel); | |
82ffb671 CH |
7406 | break; |
7407 | case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: | |
509e5e5d | 7408 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
c6c727a1 EM |
7409 | "SAS Device Status Change: No Persistancy: " |
7410 | "id=%d channel=%d", id, channel); | |
7411 | break; | |
7412 | case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: | |
7413 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7414 | "SAS Device Status Change: Unsupported Device " | |
7415 | "Discovered : id=%d channel=%d", id, channel); | |
4f766dc6 EM |
7416 | break; |
7417 | case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: | |
7418 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
c6c727a1 EM |
7419 | "SAS Device Status Change: Internal Device " |
7420 | "Reset : id=%d channel=%d", id, channel); | |
4f766dc6 EM |
7421 | break; |
7422 | case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: | |
7423 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
c6c727a1 EM |
7424 | "SAS Device Status Change: Internal Task " |
7425 | "Abort : id=%d channel=%d", id, channel); | |
4f766dc6 EM |
7426 | break; |
7427 | case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: | |
7428 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
c6c727a1 EM |
7429 | "SAS Device Status Change: Internal Abort " |
7430 | "Task Set : id=%d channel=%d", id, channel); | |
4f766dc6 EM |
7431 | break; |
7432 | case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: | |
7433 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
c6c727a1 EM |
7434 | "SAS Device Status Change: Internal Clear " |
7435 | "Task Set : id=%d channel=%d", id, channel); | |
4f766dc6 EM |
7436 | break; |
7437 | case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: | |
7438 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
c6c727a1 EM |
7439 | "SAS Device Status Change: Internal Query " |
7440 | "Task : id=%d channel=%d", id, channel); | |
82ffb671 CH |
7441 | break; |
7442 | default: | |
509e5e5d | 7443 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
c6c727a1 EM |
7444 | "SAS Device Status Change: Unknown: " |
7445 | "id=%d channel=%d", id, channel); | |
509e5e5d | 7446 | break; |
82ffb671 CH |
7447 | } |
7448 | break; | |
7449 | } | |
7450 | case MPI_EVENT_ON_BUS_TIMER_EXPIRED: | |
7451 | ds = "Bus Timer Expired"; | |
7452 | break; | |
7453 | case MPI_EVENT_QUEUE_FULL: | |
c6c727a1 EM |
7454 | { |
7455 | u16 curr_depth = (u16)(evData0 >> 16); | |
7456 | u8 channel = (u8)(evData0 >> 8); | |
7457 | u8 id = (u8)(evData0); | |
7458 | ||
7459 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7460 | "Queue Full: channel=%d id=%d depth=%d", | |
7461 | channel, id, curr_depth); | |
82ffb671 | 7462 | break; |
c6c727a1 | 7463 | } |
82ffb671 CH |
7464 | case MPI_EVENT_SAS_SES: |
7465 | ds = "SAS SES Event"; | |
7466 | break; | |
7467 | case MPI_EVENT_PERSISTENT_TABLE_FULL: | |
7468 | ds = "Persistent Table Full"; | |
7469 | break; | |
7470 | case MPI_EVENT_SAS_PHY_LINK_STATUS: | |
3a892bef | 7471 | { |
3a892bef ME |
7472 | u8 LinkRates = (u8)(evData0 >> 8); |
7473 | u8 PhyNumber = (u8)(evData0); | |
7474 | LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >> | |
7475 | MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT; | |
7476 | switch (LinkRates) { | |
7477 | case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN: | |
509e5e5d EM |
7478 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7479 | "SAS PHY Link Status: Phy=%d:" | |
3a892bef ME |
7480 | " Rate Unknown",PhyNumber); |
7481 | break; | |
7482 | case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED: | |
509e5e5d EM |
7483 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7484 | "SAS PHY Link Status: Phy=%d:" | |
3a892bef ME |
7485 | " Phy Disabled",PhyNumber); |
7486 | break; | |
7487 | case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION: | |
509e5e5d EM |
7488 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7489 | "SAS PHY Link Status: Phy=%d:" | |
3a892bef ME |
7490 | " Failed Speed Nego",PhyNumber); |
7491 | break; | |
7492 | case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE: | |
509e5e5d EM |
7493 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7494 | "SAS PHY Link Status: Phy=%d:" | |
3a892bef ME |
7495 | " Sata OOB Completed",PhyNumber); |
7496 | break; | |
7497 | case MPI_EVENT_SAS_PLS_LR_RATE_1_5: | |
509e5e5d EM |
7498 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7499 | "SAS PHY Link Status: Phy=%d:" | |
3a892bef ME |
7500 | " Rate 1.5 Gbps",PhyNumber); |
7501 | break; | |
7502 | case MPI_EVENT_SAS_PLS_LR_RATE_3_0: | |
509e5e5d EM |
7503 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7504 | "SAS PHY Link Status: Phy=%d:" | |
d75733d5 KD |
7505 | " Rate 3.0 Gbps", PhyNumber); |
7506 | break; | |
7507 | case MPI_EVENT_SAS_PLS_LR_RATE_6_0: | |
7508 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7509 | "SAS PHY Link Status: Phy=%d:" | |
7510 | " Rate 6.0 Gbps", PhyNumber); | |
3a892bef ME |
7511 | break; |
7512 | default: | |
509e5e5d EM |
7513 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7514 | "SAS PHY Link Status: Phy=%d", PhyNumber); | |
3a892bef ME |
7515 | break; |
7516 | } | |
82ffb671 | 7517 | break; |
3a892bef | 7518 | } |
82ffb671 CH |
7519 | case MPI_EVENT_SAS_DISCOVERY_ERROR: |
7520 | ds = "SAS Discovery Error"; | |
7521 | break; | |
3a892bef ME |
7522 | case MPI_EVENT_IR_RESYNC_UPDATE: |
7523 | { | |
7524 | u8 resync_complete = (u8)(evData0 >> 16); | |
509e5e5d EM |
7525 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7526 | "IR Resync Update: Complete = %d:",resync_complete); | |
3a892bef ME |
7527 | break; |
7528 | } | |
7529 | case MPI_EVENT_IR2: | |
7530 | { | |
2f187862 KD |
7531 | u8 id = (u8)(evData0); |
7532 | u8 channel = (u8)(evData0 >> 8); | |
7533 | u8 phys_num = (u8)(evData0 >> 24); | |
3a892bef | 7534 | u8 ReasonCode = (u8)(evData0 >> 16); |
2f187862 | 7535 | |
3a892bef ME |
7536 | switch (ReasonCode) { |
7537 | case MPI_EVENT_IR2_RC_LD_STATE_CHANGED: | |
2f187862 KD |
7538 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7539 | "IR2: LD State Changed: " | |
7540 | "id=%d channel=%d phys_num=%d", | |
7541 | id, channel, phys_num); | |
3a892bef ME |
7542 | break; |
7543 | case MPI_EVENT_IR2_RC_PD_STATE_CHANGED: | |
2f187862 KD |
7544 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7545 | "IR2: PD State Changed " | |
7546 | "id=%d channel=%d phys_num=%d", | |
7547 | id, channel, phys_num); | |
3a892bef ME |
7548 | break; |
7549 | case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL: | |
2f187862 KD |
7550 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7551 | "IR2: Bad Block Table Full: " | |
7552 | "id=%d channel=%d phys_num=%d", | |
7553 | id, channel, phys_num); | |
3a892bef ME |
7554 | break; |
7555 | case MPI_EVENT_IR2_RC_PD_INSERTED: | |
2f187862 KD |
7556 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7557 | "IR2: PD Inserted: " | |
7558 | "id=%d channel=%d phys_num=%d", | |
7559 | id, channel, phys_num); | |
3a892bef ME |
7560 | break; |
7561 | case MPI_EVENT_IR2_RC_PD_REMOVED: | |
2f187862 KD |
7562 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7563 | "IR2: PD Removed: " | |
7564 | "id=%d channel=%d phys_num=%d", | |
7565 | id, channel, phys_num); | |
3a892bef ME |
7566 | break; |
7567 | case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED: | |
2f187862 KD |
7568 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7569 | "IR2: Foreign CFG Detected: " | |
7570 | "id=%d channel=%d phys_num=%d", | |
7571 | id, channel, phys_num); | |
3a892bef ME |
7572 | break; |
7573 | case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR: | |
2f187862 KD |
7574 | snprintf(evStr, EVENT_DESCR_STR_SZ, |
7575 | "IR2: Rebuild Medium Error: " | |
7576 | "id=%d channel=%d phys_num=%d", | |
7577 | id, channel, phys_num); | |
3a892bef | 7578 | break; |
a7938b0b KD |
7579 | case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED: |
7580 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7581 | "IR2: Dual Port Added: " | |
7582 | "id=%d channel=%d phys_num=%d", | |
7583 | id, channel, phys_num); | |
7584 | break; | |
7585 | case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED: | |
7586 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7587 | "IR2: Dual Port Removed: " | |
7588 | "id=%d channel=%d phys_num=%d", | |
7589 | id, channel, phys_num); | |
7590 | break; | |
3a892bef ME |
7591 | default: |
7592 | ds = "IR2"; | |
7593 | break; | |
7594 | } | |
7595 | break; | |
7596 | } | |
7597 | case MPI_EVENT_SAS_DISCOVERY: | |
7598 | { | |
7599 | if (evData0) | |
7600 | ds = "SAS Discovery: Start"; | |
7601 | else | |
7602 | ds = "SAS Discovery: Stop"; | |
7603 | break; | |
7604 | } | |
7605 | case MPI_EVENT_LOG_ENTRY_ADDED: | |
7606 | ds = "SAS Log Entry Added"; | |
7607 | break; | |
82ffb671 | 7608 | |
c6c727a1 EM |
7609 | case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: |
7610 | { | |
7611 | u8 phy_num = (u8)(evData0); | |
7612 | u8 port_num = (u8)(evData0 >> 8); | |
7613 | u8 port_width = (u8)(evData0 >> 16); | |
7614 | u8 primative = (u8)(evData0 >> 24); | |
7615 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7616 | "SAS Broadcase Primative: phy=%d port=%d " | |
7617 | "width=%d primative=0x%02x", | |
7618 | phy_num, port_num, port_width, primative); | |
7619 | break; | |
7620 | } | |
7621 | ||
7622 | case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: | |
7623 | { | |
7624 | u8 reason = (u8)(evData0); | |
c6c727a1 | 7625 | |
2f187862 KD |
7626 | switch (reason) { |
7627 | case MPI_EVENT_SAS_INIT_RC_ADDED: | |
7628 | ds = "SAS Initiator Status Change: Added"; | |
7629 | break; | |
7630 | case MPI_EVENT_SAS_INIT_RC_REMOVED: | |
7631 | ds = "SAS Initiator Status Change: Deleted"; | |
7632 | break; | |
7633 | default: | |
7634 | ds = "SAS Initiator Status Change"; | |
7635 | break; | |
7636 | } | |
c6c727a1 EM |
7637 | break; |
7638 | } | |
7639 | ||
7640 | case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW: | |
7641 | { | |
7642 | u8 max_init = (u8)(evData0); | |
7643 | u8 current_init = (u8)(evData0 >> 8); | |
7644 | ||
7645 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7646 | "SAS Initiator Device Table Overflow: max initiators=%02d " | |
7647 | "current initators=%02d", | |
7648 | max_init, current_init); | |
7649 | break; | |
7650 | } | |
7651 | case MPI_EVENT_SAS_SMP_ERROR: | |
7652 | { | |
7653 | u8 status = (u8)(evData0); | |
7654 | u8 port_num = (u8)(evData0 >> 8); | |
7655 | u8 result = (u8)(evData0 >> 16); | |
7656 | ||
7657 | if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID) | |
7658 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7659 | "SAS SMP Error: port=%d result=0x%02x", | |
7660 | port_num, result); | |
7661 | else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR) | |
7662 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7663 | "SAS SMP Error: port=%d : CRC Error", | |
7664 | port_num); | |
7665 | else if (status == MPI_EVENT_SAS_SMP_TIMEOUT) | |
7666 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7667 | "SAS SMP Error: port=%d : Timeout", | |
7668 | port_num); | |
7669 | else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION) | |
7670 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7671 | "SAS SMP Error: port=%d : No Destination", | |
7672 | port_num); | |
7673 | else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION) | |
7674 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7675 | "SAS SMP Error: port=%d : Bad Destination", | |
7676 | port_num); | |
7677 | else | |
7678 | snprintf(evStr, EVENT_DESCR_STR_SZ, | |
7679 | "SAS SMP Error: port=%d : status=0x%02x", | |
7680 | port_num, status); | |
7681 | break; | |
7682 | } | |
7683 | ||
2f187862 KD |
7684 | case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE: |
7685 | { | |
7686 | u8 reason = (u8)(evData0); | |
7687 | ||
7688 | switch (reason) { | |
7689 | case MPI_EVENT_SAS_EXP_RC_ADDED: | |
7690 | ds = "Expander Status Change: Added"; | |
7691 | break; | |
7692 | case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING: | |
7693 | ds = "Expander Status Change: Deleted"; | |
7694 | break; | |
7695 | default: | |
7696 | ds = "Expander Status Change"; | |
7697 | break; | |
7698 | } | |
7699 | break; | |
7700 | } | |
7701 | ||
1da177e4 LT |
7702 | /* |
7703 | * MPT base "custom" events may be added here... | |
7704 | */ | |
7705 | default: | |
7706 | ds = "Unknown"; | |
7707 | break; | |
7708 | } | |
509e5e5d EM |
7709 | if (ds) |
7710 | strncpy(evStr, ds, EVENT_DESCR_STR_SZ); | |
1da177e4 | 7711 | |
2f187862 KD |
7712 | |
7713 | devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT | |
7714 | "MPT event:(%02Xh) : %s\n", | |
7715 | ioc->name, event, evStr)); | |
7716 | ||
7717 | devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM | |
7718 | ": Event data:\n")); | |
7719 | for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++) | |
7720 | devtverboseprintk(ioc, printk(" %08x", | |
7721 | le32_to_cpu(pEventReply->Data[ii]))); | |
7722 | devtverboseprintk(ioc, printk(KERN_DEBUG "\n")); | |
7723 | } | |
7724 | #endif | |
1da177e4 | 7725 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
d9489fb6 RD |
7726 | /** |
7727 | * ProcessEventNotification - Route EventNotificationReply to all event handlers | |
1da177e4 LT |
7728 | * @ioc: Pointer to MPT_ADAPTER structure |
7729 | * @pEventReply: Pointer to EventNotification reply frame | |
7730 | * @evHandlers: Pointer to integer, number of event handlers | |
7731 | * | |
d9489fb6 RD |
7732 | * Routes a received EventNotificationReply to all currently registered |
7733 | * event handlers. | |
1da177e4 LT |
7734 | * Returns sum of event handlers return values. |
7735 | */ | |
7736 | static int | |
7737 | ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers) | |
7738 | { | |
7739 | u16 evDataLen; | |
7740 | u32 evData0 = 0; | |
1da177e4 | 7741 | int ii; |
f606f571 | 7742 | u8 cb_idx; |
1da177e4 LT |
7743 | int r = 0; |
7744 | int handlers = 0; | |
1da177e4 LT |
7745 | u8 event; |
7746 | ||
7747 | /* | |
7748 | * Do platform normalization of values | |
7749 | */ | |
7750 | event = le32_to_cpu(pEventReply->Event) & 0xFF; | |
1da177e4 LT |
7751 | evDataLen = le16_to_cpu(pEventReply->EventDataLength); |
7752 | if (evDataLen) { | |
7753 | evData0 = le32_to_cpu(pEventReply->Data[0]); | |
7754 | } | |
7755 | ||
436ace72 | 7756 | #ifdef CONFIG_FUSION_LOGGING |
2f187862 KD |
7757 | if (evDataLen) |
7758 | mpt_display_event_info(ioc, pEventReply); | |
1da177e4 LT |
7759 | #endif |
7760 | ||
7761 | /* | |
7762 | * Do general / base driver event processing | |
7763 | */ | |
7764 | switch(event) { | |
1da177e4 LT |
7765 | case MPI_EVENT_EVENT_CHANGE: /* 0A */ |
7766 | if (evDataLen) { | |
7767 | u8 evState = evData0 & 0xFF; | |
7768 | ||
7769 | /* CHECKME! What if evState unexpectedly says OFF (0)? */ | |
7770 | ||
7771 | /* Update EventState field in cached IocFacts */ | |
7772 | if (ioc->facts.Function) { | |
7773 | ioc->facts.EventState = evState; | |
7774 | } | |
7775 | } | |
7776 | break; | |
ece50914 ME |
7777 | case MPI_EVENT_INTEGRATED_RAID: |
7778 | mptbase_raid_process_event_data(ioc, | |
7779 | (MpiEventDataRaid_t *)pEventReply->Data); | |
7780 | break; | |
82ffb671 CH |
7781 | default: |
7782 | break; | |
1da177e4 LT |
7783 | } |
7784 | ||
7785 | /* | |
7786 | * Should this event be logged? Events are written sequentially. | |
7787 | * When buffer is full, start again at the top. | |
7788 | */ | |
7789 | if (ioc->events && (ioc->eventTypes & ( 1 << event))) { | |
7790 | int idx; | |
7791 | ||
5b5ef4f6 | 7792 | idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE; |
1da177e4 LT |
7793 | |
7794 | ioc->events[idx].event = event; | |
7795 | ioc->events[idx].eventContext = ioc->eventContext; | |
7796 | ||
7797 | for (ii = 0; ii < 2; ii++) { | |
7798 | if (ii < evDataLen) | |
7799 | ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]); | |
7800 | else | |
7801 | ioc->events[idx].data[ii] = 0; | |
7802 | } | |
7803 | ||
7804 | ioc->eventContext++; | |
7805 | } | |
7806 | ||
7807 | ||
7808 | /* | |
7809 | * Call each currently registered protocol event handler. | |
7810 | */ | |
8d6d83e9 | 7811 | for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { |
f606f571 | 7812 | if (MptEvHandlers[cb_idx]) { |
2f187862 KD |
7813 | devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
7814 | "Routing Event to event handler #%d\n", | |
7815 | ioc->name, cb_idx)); | |
f606f571 | 7816 | r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply); |
1da177e4 LT |
7817 | handlers++; |
7818 | } | |
7819 | } | |
7820 | /* FIXME? Examine results here? */ | |
7821 | ||
7822 | /* | |
7823 | * If needed, send (a single) EventAck. | |
7824 | */ | |
7825 | if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) { | |
436ace72 | 7826 | devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
c6678e0c | 7827 | "EventAck required\n",ioc->name)); |
1da177e4 | 7828 | if ((ii = SendEventAck(ioc, pEventReply)) != 0) { |
436ace72 | 7829 | devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n", |
1da177e4 LT |
7830 | ioc->name, ii)); |
7831 | } | |
7832 | } | |
7833 | ||
7834 | *evHandlers = handlers; | |
7835 | return r; | |
7836 | } | |
7837 | ||
7838 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 7839 | /** |
1da177e4 LT |
7840 | * mpt_fc_log_info - Log information returned from Fibre Channel IOC. |
7841 | * @ioc: Pointer to MPT_ADAPTER structure | |
7842 | * @log_info: U32 LogInfo reply word from the IOC | |
7843 | * | |
4f766dc6 | 7844 | * Refer to lsi/mpi_log_fc.h. |
1da177e4 LT |
7845 | */ |
7846 | static void | |
7847 | mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) | |
7848 | { | |
7c431e5c EM |
7849 | char *desc = "unknown"; |
7850 | ||
7851 | switch (log_info & 0xFF000000) { | |
7852 | case MPI_IOCLOGINFO_FC_INIT_BASE: | |
7853 | desc = "FCP Initiator"; | |
7854 | break; | |
7855 | case MPI_IOCLOGINFO_FC_TARGET_BASE: | |
7856 | desc = "FCP Target"; | |
7857 | break; | |
7858 | case MPI_IOCLOGINFO_FC_LAN_BASE: | |
7859 | desc = "LAN"; | |
7860 | break; | |
7861 | case MPI_IOCLOGINFO_FC_MSG_BASE: | |
7862 | desc = "MPI Message Layer"; | |
7863 | break; | |
7864 | case MPI_IOCLOGINFO_FC_LINK_BASE: | |
7865 | desc = "FC Link"; | |
7866 | break; | |
7867 | case MPI_IOCLOGINFO_FC_CTX_BASE: | |
7868 | desc = "Context Manager"; | |
7869 | break; | |
7870 | case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET: | |
7871 | desc = "Invalid Field Offset"; | |
7872 | break; | |
7873 | case MPI_IOCLOGINFO_FC_STATE_CHANGE: | |
7874 | desc = "State Change Info"; | |
7875 | break; | |
7876 | } | |
7877 | ||
7878 | printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n", | |
7879 | ioc->name, log_info, desc, (log_info & 0xFFFFFF)); | |
1da177e4 LT |
7880 | } |
7881 | ||
7882 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 7883 | /** |
335a9412 | 7884 | * mpt_spi_log_info - Log information returned from SCSI Parallel IOC. |
1da177e4 | 7885 | * @ioc: Pointer to MPT_ADAPTER structure |
1da177e4 LT |
7886 | * @log_info: U32 LogInfo word from the IOC |
7887 | * | |
7888 | * Refer to lsi/sp_log.h. | |
7889 | */ | |
7890 | static void | |
335a9412 | 7891 | mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) |
1da177e4 LT |
7892 | { |
7893 | u32 info = log_info & 0x00FF0000; | |
7894 | char *desc = "unknown"; | |
7895 | ||
7896 | switch (info) { | |
7897 | case 0x00010000: | |
7898 | desc = "bug! MID not found"; | |
1da177e4 LT |
7899 | break; |
7900 | ||
7901 | case 0x00020000: | |
7902 | desc = "Parity Error"; | |
7903 | break; | |
7904 | ||
7905 | case 0x00030000: | |
7906 | desc = "ASYNC Outbound Overrun"; | |
7907 | break; | |
7908 | ||
7909 | case 0x00040000: | |
7910 | desc = "SYNC Offset Error"; | |
7911 | break; | |
7912 | ||
7913 | case 0x00050000: | |
7914 | desc = "BM Change"; | |
7915 | break; | |
7916 | ||
7917 | case 0x00060000: | |
7918 | desc = "Msg In Overflow"; | |
7919 | break; | |
7920 | ||
7921 | case 0x00070000: | |
7922 | desc = "DMA Error"; | |
7923 | break; | |
7924 | ||
7925 | case 0x00080000: | |
7926 | desc = "Outbound DMA Overrun"; | |
7927 | break; | |
c6678e0c | 7928 | |
1da177e4 LT |
7929 | case 0x00090000: |
7930 | desc = "Task Management"; | |
7931 | break; | |
7932 | ||
7933 | case 0x000A0000: | |
7934 | desc = "Device Problem"; | |
7935 | break; | |
7936 | ||
7937 | case 0x000B0000: | |
7938 | desc = "Invalid Phase Change"; | |
7939 | break; | |
7940 | ||
7941 | case 0x000C0000: | |
7942 | desc = "Untagged Table Size"; | |
7943 | break; | |
c6678e0c | 7944 | |
1da177e4 LT |
7945 | } |
7946 | ||
7947 | printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc); | |
7948 | } | |
7949 | ||
466544d8 MED |
7950 | /* strings for sas loginfo */ |
7951 | static char *originator_str[] = { | |
7952 | "IOP", /* 00h */ | |
7953 | "PL", /* 01h */ | |
7954 | "IR" /* 02h */ | |
7955 | }; | |
7956 | static char *iop_code_str[] = { | |
7957 | NULL, /* 00h */ | |
7958 | "Invalid SAS Address", /* 01h */ | |
7959 | NULL, /* 02h */ | |
7960 | "Invalid Page", /* 03h */ | |
4f766dc6 EM |
7961 | "Diag Message Error", /* 04h */ |
7962 | "Task Terminated", /* 05h */ | |
7963 | "Enclosure Management", /* 06h */ | |
7964 | "Target Mode" /* 07h */ | |
466544d8 MED |
7965 | }; |
7966 | static char *pl_code_str[] = { | |
7967 | NULL, /* 00h */ | |
7968 | "Open Failure", /* 01h */ | |
7969 | "Invalid Scatter Gather List", /* 02h */ | |
7970 | "Wrong Relative Offset or Frame Length", /* 03h */ | |
7971 | "Frame Transfer Error", /* 04h */ | |
7972 | "Transmit Frame Connected Low", /* 05h */ | |
7973 | "SATA Non-NCQ RW Error Bit Set", /* 06h */ | |
7974 | "SATA Read Log Receive Data Error", /* 07h */ | |
7975 | "SATA NCQ Fail All Commands After Error", /* 08h */ | |
7976 | "SATA Error in Receive Set Device Bit FIS", /* 09h */ | |
7977 | "Receive Frame Invalid Message", /* 0Ah */ | |
7978 | "Receive Context Message Valid Error", /* 0Bh */ | |
7979 | "Receive Frame Current Frame Error", /* 0Ch */ | |
7980 | "SATA Link Down", /* 0Dh */ | |
7981 | "Discovery SATA Init W IOS", /* 0Eh */ | |
7982 | "Config Invalid Page", /* 0Fh */ | |
7983 | "Discovery SATA Init Timeout", /* 10h */ | |
7984 | "Reset", /* 11h */ | |
7985 | "Abort", /* 12h */ | |
7986 | "IO Not Yet Executed", /* 13h */ | |
7987 | "IO Executed", /* 14h */ | |
c6c727a1 EM |
7988 | "Persistent Reservation Out Not Affiliation " |
7989 | "Owner", /* 15h */ | |
5bf52c4f | 7990 | "Open Transmit DMA Abort", /* 16h */ |
4f766dc6 | 7991 | "IO Device Missing Delay Retry", /* 17h */ |
25985edc | 7992 | "IO Cancelled Due to Receive Error", /* 18h */ |
466544d8 MED |
7993 | NULL, /* 19h */ |
7994 | NULL, /* 1Ah */ | |
7995 | NULL, /* 1Bh */ | |
7996 | NULL, /* 1Ch */ | |
7997 | NULL, /* 1Dh */ | |
7998 | NULL, /* 1Eh */ | |
7999 | NULL, /* 1Fh */ | |
8000 | "Enclosure Management" /* 20h */ | |
8001 | }; | |
c6c727a1 EM |
8002 | static char *ir_code_str[] = { |
8003 | "Raid Action Error", /* 00h */ | |
8004 | NULL, /* 00h */ | |
8005 | NULL, /* 01h */ | |
8006 | NULL, /* 02h */ | |
8007 | NULL, /* 03h */ | |
8008 | NULL, /* 04h */ | |
8009 | NULL, /* 05h */ | |
8010 | NULL, /* 06h */ | |
8011 | NULL /* 07h */ | |
8012 | }; | |
8013 | static char *raid_sub_code_str[] = { | |
8014 | NULL, /* 00h */ | |
8015 | "Volume Creation Failed: Data Passed too " | |
8016 | "Large", /* 01h */ | |
8017 | "Volume Creation Failed: Duplicate Volumes " | |
8018 | "Attempted", /* 02h */ | |
8019 | "Volume Creation Failed: Max Number " | |
8020 | "Supported Volumes Exceeded", /* 03h */ | |
8021 | "Volume Creation Failed: DMA Error", /* 04h */ | |
8022 | "Volume Creation Failed: Invalid Volume Type", /* 05h */ | |
8023 | "Volume Creation Failed: Error Reading " | |
8024 | "MFG Page 4", /* 06h */ | |
8025 | "Volume Creation Failed: Creating Internal " | |
8026 | "Structures", /* 07h */ | |
8027 | NULL, /* 08h */ | |
8028 | NULL, /* 09h */ | |
8029 | NULL, /* 0Ah */ | |
8030 | NULL, /* 0Bh */ | |
8031 | NULL, /* 0Ch */ | |
8032 | NULL, /* 0Dh */ | |
8033 | NULL, /* 0Eh */ | |
8034 | NULL, /* 0Fh */ | |
8035 | "Activation failed: Already Active Volume", /* 10h */ | |
8036 | "Activation failed: Unsupported Volume Type", /* 11h */ | |
8037 | "Activation failed: Too Many Active Volumes", /* 12h */ | |
8038 | "Activation failed: Volume ID in Use", /* 13h */ | |
8039 | "Activation failed: Reported Failure", /* 14h */ | |
8040 | "Activation failed: Importing a Volume", /* 15h */ | |
8041 | NULL, /* 16h */ | |
8042 | NULL, /* 17h */ | |
8043 | NULL, /* 18h */ | |
8044 | NULL, /* 19h */ | |
8045 | NULL, /* 1Ah */ | |
8046 | NULL, /* 1Bh */ | |
8047 | NULL, /* 1Ch */ | |
8048 | NULL, /* 1Dh */ | |
8049 | NULL, /* 1Eh */ | |
8050 | NULL, /* 1Fh */ | |
8051 | "Phys Disk failed: Too Many Phys Disks", /* 20h */ | |
8052 | "Phys Disk failed: Data Passed too Large", /* 21h */ | |
8053 | "Phys Disk failed: DMA Error", /* 22h */ | |
8054 | "Phys Disk failed: Invalid <channel:id>", /* 23h */ | |
8055 | "Phys Disk failed: Creating Phys Disk Config " | |
8056 | "Page", /* 24h */ | |
8057 | NULL, /* 25h */ | |
8058 | NULL, /* 26h */ | |
8059 | NULL, /* 27h */ | |
8060 | NULL, /* 28h */ | |
8061 | NULL, /* 29h */ | |
8062 | NULL, /* 2Ah */ | |
8063 | NULL, /* 2Bh */ | |
8064 | NULL, /* 2Ch */ | |
8065 | NULL, /* 2Dh */ | |
8066 | NULL, /* 2Eh */ | |
8067 | NULL, /* 2Fh */ | |
8068 | "Compatibility Error: IR Disabled", /* 30h */ | |
b595076a | 8069 | "Compatibility Error: Inquiry Command Failed", /* 31h */ |
c6c727a1 EM |
8070 | "Compatibility Error: Device not Direct Access " |
8071 | "Device ", /* 32h */ | |
8072 | "Compatibility Error: Removable Device Found", /* 33h */ | |
8073 | "Compatibility Error: Device SCSI Version not " | |
8074 | "2 or Higher", /* 34h */ | |
8075 | "Compatibility Error: SATA Device, 48 BIT LBA " | |
8076 | "not Supported", /* 35h */ | |
8077 | "Compatibility Error: Device doesn't have " | |
8078 | "512 Byte Block Sizes", /* 36h */ | |
8079 | "Compatibility Error: Volume Type Check Failed", /* 37h */ | |
8080 | "Compatibility Error: Volume Type is " | |
8081 | "Unsupported by FW", /* 38h */ | |
8082 | "Compatibility Error: Disk Drive too Small for " | |
8083 | "use in Volume", /* 39h */ | |
8084 | "Compatibility Error: Phys Disk for Create " | |
8085 | "Volume not Found", /* 3Ah */ | |
8086 | "Compatibility Error: Too Many or too Few " | |
8087 | "Disks for Volume Type", /* 3Bh */ | |
8088 | "Compatibility Error: Disk stripe Sizes " | |
8089 | "Must be 64KB", /* 3Ch */ | |
8090 | "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */ | |
8091 | }; | |
466544d8 MED |
8092 | |
8093 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 8094 | /** |
466544d8 MED |
8095 | * mpt_sas_log_info - Log information returned from SAS IOC. |
8096 | * @ioc: Pointer to MPT_ADAPTER structure | |
8097 | * @log_info: U32 LogInfo reply word from the IOC | |
fc58fb18 | 8098 | * @cb_idx: callback function's handle |
466544d8 MED |
8099 | * |
8100 | * Refer to lsi/mpi_log_sas.h. | |
c6c727a1 | 8101 | **/ |
466544d8 | 8102 | static void |
213aaca3 | 8103 | mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx) |
466544d8 MED |
8104 | { |
8105 | union loginfo_type { | |
8106 | u32 loginfo; | |
8107 | struct { | |
8108 | u32 subcode:16; | |
8109 | u32 code:8; | |
8110 | u32 originator:4; | |
8111 | u32 bus_type:4; | |
8112 | }dw; | |
8113 | }; | |
8114 | union loginfo_type sas_loginfo; | |
c6c727a1 | 8115 | char *originator_desc = NULL; |
466544d8 | 8116 | char *code_desc = NULL; |
c6c727a1 | 8117 | char *sub_code_desc = NULL; |
466544d8 MED |
8118 | |
8119 | sas_loginfo.loginfo = log_info; | |
8120 | if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) && | |
dd7c34e9 | 8121 | (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str))) |
466544d8 | 8122 | return; |
c6c727a1 EM |
8123 | |
8124 | originator_desc = originator_str[sas_loginfo.dw.originator]; | |
8125 | ||
8126 | switch (sas_loginfo.dw.originator) { | |
8127 | ||
8128 | case 0: /* IOP */ | |
8129 | if (sas_loginfo.dw.code < | |
dd7c34e9 | 8130 | ARRAY_SIZE(iop_code_str)) |
c6c727a1 EM |
8131 | code_desc = iop_code_str[sas_loginfo.dw.code]; |
8132 | break; | |
8133 | case 1: /* PL */ | |
8134 | if (sas_loginfo.dw.code < | |
dd7c34e9 | 8135 | ARRAY_SIZE(pl_code_str)) |
c6c727a1 EM |
8136 | code_desc = pl_code_str[sas_loginfo.dw.code]; |
8137 | break; | |
8138 | case 2: /* IR */ | |
8139 | if (sas_loginfo.dw.code >= | |
dd7c34e9 | 8140 | ARRAY_SIZE(ir_code_str)) |
c6c727a1 EM |
8141 | break; |
8142 | code_desc = ir_code_str[sas_loginfo.dw.code]; | |
8143 | if (sas_loginfo.dw.subcode >= | |
dd7c34e9 | 8144 | ARRAY_SIZE(raid_sub_code_str)) |
081f4f4c | 8145 | break; |
c6c727a1 EM |
8146 | if (sas_loginfo.dw.code == 0) |
8147 | sub_code_desc = | |
8148 | raid_sub_code_str[sas_loginfo.dw.subcode]; | |
8149 | break; | |
8150 | default: | |
8151 | return; | |
466544d8 MED |
8152 | } |
8153 | ||
c6c727a1 EM |
8154 | if (sub_code_desc != NULL) |
8155 | printk(MYIOC_s_INFO_FMT | |
8156 | "LogInfo(0x%08x): Originator={%s}, Code={%s}," | |
213aaca3 | 8157 | " SubCode={%s} cb_idx %s\n", |
c6c727a1 | 8158 | ioc->name, log_info, originator_desc, code_desc, |
213aaca3 | 8159 | sub_code_desc, MptCallbacksName[cb_idx]); |
c6c727a1 | 8160 | else if (code_desc != NULL) |
466544d8 MED |
8161 | printk(MYIOC_s_INFO_FMT |
8162 | "LogInfo(0x%08x): Originator={%s}, Code={%s}," | |
213aaca3 | 8163 | " SubCode(0x%04x) cb_idx %s\n", |
c6c727a1 | 8164 | ioc->name, log_info, originator_desc, code_desc, |
213aaca3 | 8165 | sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]); |
466544d8 MED |
8166 | else |
8167 | printk(MYIOC_s_INFO_FMT | |
8168 | "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x)," | |
213aaca3 | 8169 | " SubCode(0x%04x) cb_idx %s\n", |
c6c727a1 | 8170 | ioc->name, log_info, originator_desc, |
213aaca3 KD |
8171 | sas_loginfo.dw.code, sas_loginfo.dw.subcode, |
8172 | MptCallbacksName[cb_idx]); | |
466544d8 MED |
8173 | } |
8174 | ||
1da177e4 | 8175 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
d9489fb6 | 8176 | /** |
c6c727a1 EM |
8177 | * mpt_iocstatus_info_config - IOCSTATUS information for config pages |
8178 | * @ioc: Pointer to MPT_ADAPTER structure | |
1544d677 | 8179 | * @ioc_status: U32 IOCStatus word from IOC |
c6c727a1 EM |
8180 | * @mf: Pointer to MPT request frame |
8181 | * | |
8182 | * Refer to lsi/mpi.h. | |
8183 | **/ | |
8184 | static void | |
8185 | mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) | |
8186 | { | |
8187 | Config_t *pReq = (Config_t *)mf; | |
8188 | char extend_desc[EVENT_DESCR_STR_SZ]; | |
8189 | char *desc = NULL; | |
8190 | u32 form; | |
8191 | u8 page_type; | |
8192 | ||
8193 | if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED) | |
8194 | page_type = pReq->ExtPageType; | |
8195 | else | |
8196 | page_type = pReq->Header.PageType; | |
8197 | ||
8198 | /* | |
8199 | * ignore invalid page messages for GET_NEXT_HANDLE | |
8200 | */ | |
8201 | form = le32_to_cpu(pReq->PageAddress); | |
8202 | if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { | |
8203 | if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE || | |
8204 | page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER || | |
8205 | page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) { | |
8206 | if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) == | |
8207 | MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE) | |
8208 | return; | |
8209 | } | |
8210 | if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE) | |
8211 | if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) == | |
8212 | MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) | |
8213 | return; | |
8214 | } | |
8215 | ||
8216 | snprintf(extend_desc, EVENT_DESCR_STR_SZ, | |
8217 | "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh", | |
8218 | page_type, pReq->Header.PageNumber, pReq->Action, form); | |
8219 | ||
8220 | switch (ioc_status) { | |
8221 | ||
8222 | case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ | |
8223 | desc = "Config Page Invalid Action"; | |
8224 | break; | |
8225 | ||
8226 | case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ | |
8227 | desc = "Config Page Invalid Type"; | |
8228 | break; | |
8229 | ||
8230 | case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ | |
8231 | desc = "Config Page Invalid Page"; | |
8232 | break; | |
8233 | ||
8234 | case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ | |
8235 | desc = "Config Page Invalid Data"; | |
8236 | break; | |
8237 | ||
8238 | case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ | |
8239 | desc = "Config Page No Defaults"; | |
8240 | break; | |
8241 | ||
8242 | case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ | |
8243 | desc = "Config Page Can't Commit"; | |
8244 | break; | |
8245 | } | |
8246 | ||
8247 | if (!desc) | |
8248 | return; | |
8249 | ||
29dd3609 EM |
8250 | dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n", |
8251 | ioc->name, ioc_status, desc, extend_desc)); | |
c6c727a1 EM |
8252 | } |
8253 | ||
8254 | /** | |
8255 | * mpt_iocstatus_info - IOCSTATUS information returned from IOC. | |
1da177e4 LT |
8256 | * @ioc: Pointer to MPT_ADAPTER structure |
8257 | * @ioc_status: U32 IOCStatus word from IOC | |
8258 | * @mf: Pointer to MPT request frame | |
8259 | * | |
8260 | * Refer to lsi/mpi.h. | |
c6c727a1 | 8261 | **/ |
1da177e4 | 8262 | static void |
c6c727a1 | 8263 | mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) |
1da177e4 LT |
8264 | { |
8265 | u32 status = ioc_status & MPI_IOCSTATUS_MASK; | |
4f766dc6 | 8266 | char *desc = NULL; |
1da177e4 LT |
8267 | |
8268 | switch (status) { | |
c6c727a1 EM |
8269 | |
8270 | /****************************************************************************/ | |
8271 | /* Common IOCStatus values for all replies */ | |
8272 | /****************************************************************************/ | |
8273 | ||
1da177e4 LT |
8274 | case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ |
8275 | desc = "Invalid Function"; | |
8276 | break; | |
8277 | ||
8278 | case MPI_IOCSTATUS_BUSY: /* 0x0002 */ | |
8279 | desc = "Busy"; | |
8280 | break; | |
8281 | ||
8282 | case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ | |
8283 | desc = "Invalid SGL"; | |
8284 | break; | |
8285 | ||
8286 | case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ | |
8287 | desc = "Internal Error"; | |
8288 | break; | |
8289 | ||
8290 | case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ | |
8291 | desc = "Reserved"; | |
8292 | break; | |
8293 | ||
8294 | case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ | |
8295 | desc = "Insufficient Resources"; | |
8296 | break; | |
8297 | ||
8298 | case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ | |
8299 | desc = "Invalid Field"; | |
8300 | break; | |
8301 | ||
8302 | case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ | |
8303 | desc = "Invalid State"; | |
8304 | break; | |
8305 | ||
c6c727a1 EM |
8306 | /****************************************************************************/ |
8307 | /* Config IOCStatus values */ | |
8308 | /****************************************************************************/ | |
8309 | ||
1da177e4 LT |
8310 | case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ |
8311 | case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ | |
8312 | case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ | |
8313 | case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ | |
8314 | case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ | |
8315 | case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ | |
c6c727a1 | 8316 | mpt_iocstatus_info_config(ioc, status, mf); |
1da177e4 LT |
8317 | break; |
8318 | ||
c6c727a1 EM |
8319 | /****************************************************************************/ |
8320 | /* SCSIIO Reply (SPI, FCP, SAS) initiator values */ | |
8321 | /* */ | |
8322 | /* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */ | |
8323 | /* */ | |
8324 | /****************************************************************************/ | |
8325 | ||
1da177e4 | 8326 | case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ |
c6c727a1 EM |
8327 | case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ |
8328 | case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ | |
8329 | case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ | |
8330 | case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ | |
8331 | case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ | |
8332 | case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ | |
8333 | case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ | |
8334 | case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ | |
8335 | case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ | |
8336 | case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ | |
8337 | case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ | |
8338 | case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ | |
1da177e4 LT |
8339 | break; |
8340 | ||
c6c727a1 EM |
8341 | /****************************************************************************/ |
8342 | /* SCSI Target values */ | |
8343 | /****************************************************************************/ | |
8344 | ||
8345 | case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */ | |
8346 | desc = "Target: Priority IO"; | |
1da177e4 LT |
8347 | break; |
8348 | ||
c6c727a1 EM |
8349 | case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */ |
8350 | desc = "Target: Invalid Port"; | |
1da177e4 LT |
8351 | break; |
8352 | ||
c6c727a1 EM |
8353 | case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */ |
8354 | desc = "Target Invalid IO Index:"; | |
1da177e4 | 8355 | break; |
1da177e4 | 8356 | |
c6c727a1 EM |
8357 | case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */ |
8358 | desc = "Target: Aborted"; | |
1da177e4 LT |
8359 | break; |
8360 | ||
c6c727a1 EM |
8361 | case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */ |
8362 | desc = "Target: No Conn Retryable"; | |
1da177e4 LT |
8363 | break; |
8364 | ||
c6c727a1 EM |
8365 | case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */ |
8366 | desc = "Target: No Connection"; | |
1da177e4 LT |
8367 | break; |
8368 | ||
c6c727a1 EM |
8369 | case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */ |
8370 | desc = "Target: Transfer Count Mismatch"; | |
1da177e4 LT |
8371 | break; |
8372 | ||
c6c727a1 EM |
8373 | case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */ |
8374 | desc = "Target: STS Data not Sent"; | |
1da177e4 LT |
8375 | break; |
8376 | ||
c6c727a1 EM |
8377 | case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */ |
8378 | desc = "Target: Data Offset Error"; | |
1da177e4 LT |
8379 | break; |
8380 | ||
c6c727a1 EM |
8381 | case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */ |
8382 | desc = "Target: Too Much Write Data"; | |
1da177e4 LT |
8383 | break; |
8384 | ||
c6c727a1 EM |
8385 | case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */ |
8386 | desc = "Target: IU Too Short"; | |
1da177e4 LT |
8387 | break; |
8388 | ||
c6c727a1 EM |
8389 | case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */ |
8390 | desc = "Target: ACK NAK Timeout"; | |
8391 | break; | |
8392 | ||
8393 | case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */ | |
8394 | desc = "Target: Nak Received"; | |
8395 | break; | |
8396 | ||
8397 | /****************************************************************************/ | |
8398 | /* Fibre Channel Direct Access values */ | |
8399 | /****************************************************************************/ | |
8400 | ||
8401 | case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */ | |
8402 | desc = "FC: Aborted"; | |
8403 | break; | |
8404 | ||
8405 | case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */ | |
8406 | desc = "FC: RX ID Invalid"; | |
8407 | break; | |
8408 | ||
8409 | case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */ | |
8410 | desc = "FC: DID Invalid"; | |
8411 | break; | |
8412 | ||
8413 | case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */ | |
8414 | desc = "FC: Node Logged Out"; | |
8415 | break; | |
8416 | ||
8417 | case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */ | |
8418 | desc = "FC: Exchange Canceled"; | |
8419 | break; | |
8420 | ||
8421 | /****************************************************************************/ | |
8422 | /* LAN values */ | |
8423 | /****************************************************************************/ | |
8424 | ||
8425 | case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */ | |
8426 | desc = "LAN: Device not Found"; | |
8427 | break; | |
8428 | ||
8429 | case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */ | |
8430 | desc = "LAN: Device Failure"; | |
8431 | break; | |
8432 | ||
8433 | case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */ | |
8434 | desc = "LAN: Transmit Error"; | |
8435 | break; | |
8436 | ||
8437 | case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */ | |
8438 | desc = "LAN: Transmit Aborted"; | |
8439 | break; | |
8440 | ||
8441 | case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */ | |
8442 | desc = "LAN: Receive Error"; | |
8443 | break; | |
8444 | ||
8445 | case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */ | |
8446 | desc = "LAN: Receive Aborted"; | |
8447 | break; | |
8448 | ||
8449 | case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */ | |
8450 | desc = "LAN: Partial Packet"; | |
8451 | break; | |
8452 | ||
8453 | case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */ | |
8454 | desc = "LAN: Canceled"; | |
8455 | break; | |
8456 | ||
8457 | /****************************************************************************/ | |
8458 | /* Serial Attached SCSI values */ | |
8459 | /****************************************************************************/ | |
8460 | ||
8461 | case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */ | |
8462 | desc = "SAS: SMP Request Failed"; | |
8463 | break; | |
8464 | ||
8465 | case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */ | |
8466 | desc = "SAS: SMP Data Overrun"; | |
1da177e4 LT |
8467 | break; |
8468 | ||
8469 | default: | |
8470 | desc = "Others"; | |
8471 | break; | |
8472 | } | |
c6c727a1 EM |
8473 | |
8474 | if (!desc) | |
8475 | return; | |
8476 | ||
29dd3609 EM |
8477 | dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n", |
8478 | ioc->name, status, desc)); | |
1da177e4 LT |
8479 | } |
8480 | ||
8481 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
7fadc87e MED |
8482 | EXPORT_SYMBOL(mpt_attach); |
8483 | EXPORT_SYMBOL(mpt_detach); | |
8484 | #ifdef CONFIG_PM | |
8485 | EXPORT_SYMBOL(mpt_resume); | |
8486 | EXPORT_SYMBOL(mpt_suspend); | |
8487 | #endif | |
1da177e4 | 8488 | EXPORT_SYMBOL(ioc_list); |
1da177e4 LT |
8489 | EXPORT_SYMBOL(mpt_register); |
8490 | EXPORT_SYMBOL(mpt_deregister); | |
8491 | EXPORT_SYMBOL(mpt_event_register); | |
8492 | EXPORT_SYMBOL(mpt_event_deregister); | |
8493 | EXPORT_SYMBOL(mpt_reset_register); | |
8494 | EXPORT_SYMBOL(mpt_reset_deregister); | |
8495 | EXPORT_SYMBOL(mpt_device_driver_register); | |
8496 | EXPORT_SYMBOL(mpt_device_driver_deregister); | |
8497 | EXPORT_SYMBOL(mpt_get_msg_frame); | |
8498 | EXPORT_SYMBOL(mpt_put_msg_frame); | |
7a195f46 | 8499 | EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri); |
1da177e4 | 8500 | EXPORT_SYMBOL(mpt_free_msg_frame); |
1da177e4 LT |
8501 | EXPORT_SYMBOL(mpt_send_handshake_request); |
8502 | EXPORT_SYMBOL(mpt_verify_adapter); | |
8503 | EXPORT_SYMBOL(mpt_GetIocState); | |
8504 | EXPORT_SYMBOL(mpt_print_ioc_summary); | |
1da177e4 LT |
8505 | EXPORT_SYMBOL(mpt_HardResetHandler); |
8506 | EXPORT_SYMBOL(mpt_config); | |
1da177e4 | 8507 | EXPORT_SYMBOL(mpt_findImVolumes); |
1da177e4 LT |
8508 | EXPORT_SYMBOL(mpt_alloc_fw_memory); |
8509 | EXPORT_SYMBOL(mpt_free_fw_memory); | |
82ffb671 | 8510 | EXPORT_SYMBOL(mptbase_sas_persist_operation); |
b506ade9 | 8511 | EXPORT_SYMBOL(mpt_raid_phys_disk_pg0); |
1da177e4 | 8512 | |
1da177e4 | 8513 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
d9489fb6 | 8514 | /** |
1da177e4 LT |
8515 | * fusion_init - Fusion MPT base driver initialization routine. |
8516 | * | |
8517 | * Returns 0 for success, non-zero for failure. | |
8518 | */ | |
8519 | static int __init | |
8520 | fusion_init(void) | |
8521 | { | |
f606f571 | 8522 | u8 cb_idx; |
1da177e4 LT |
8523 | |
8524 | show_mptmod_ver(my_NAME, my_VERSION); | |
8525 | printk(KERN_INFO COPYRIGHT "\n"); | |
8526 | ||
f606f571 PS |
8527 | for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { |
8528 | MptCallbacks[cb_idx] = NULL; | |
8529 | MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; | |
8530 | MptEvHandlers[cb_idx] = NULL; | |
8531 | MptResetHandlers[cb_idx] = NULL; | |
1da177e4 LT |
8532 | } |
8533 | ||
7fadc87e | 8534 | /* Register ourselves (mptbase) in order to facilitate |
1da177e4 LT |
8535 | * EventNotification handling. |
8536 | */ | |
213aaca3 KD |
8537 | mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER, |
8538 | "mptbase_reply"); | |
1da177e4 LT |
8539 | |
8540 | /* Register for hard reset handling callbacks. | |
8541 | */ | |
436ace72 | 8542 | mpt_reset_register(mpt_base_index, mpt_ioc_reset); |
1da177e4 LT |
8543 | |
8544 | #ifdef CONFIG_PROC_FS | |
8545 | (void) procmpt_create(); | |
8546 | #endif | |
7fadc87e | 8547 | return 0; |
1da177e4 LT |
8548 | } |
8549 | ||
8550 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
d9489fb6 | 8551 | /** |
1da177e4 LT |
8552 | * fusion_exit - Perform driver unload cleanup. |
8553 | * | |
8554 | * This routine frees all resources associated with each MPT adapter | |
8555 | * and removes all %MPT_PROCFS_MPTBASEDIR entries. | |
8556 | */ | |
8557 | static void __exit | |
8558 | fusion_exit(void) | |
8559 | { | |
8560 | ||
1da177e4 LT |
8561 | mpt_reset_deregister(mpt_base_index); |
8562 | ||
8563 | #ifdef CONFIG_PROC_FS | |
8564 | procmpt_destroy(); | |
8565 | #endif | |
8566 | } | |
8567 | ||
1da177e4 LT |
8568 | module_init(fusion_init); |
8569 | module_exit(fusion_exit); |