]>
Commit | Line | Data |
---|---|---|
243eabcf MED |
1 | /* |
2 | * linux/drivers/message/fusion/mptspi.c | |
3 | * For use with LSI Logic PCI chip/adapter(s) | |
4 | * running LSI Logic Fusion MPT (Message Passing Technology) firmware. | |
5 | * | |
6 | * Copyright (c) 1999-2005 LSI Logic Corporation | |
7 | * (mailto:mpt_linux_developer@lsil.com) | |
8 | * | |
9 | */ | |
10 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
11 | /* | |
12 | This program is free software; you can redistribute it and/or modify | |
13 | it under the terms of the GNU General Public License as published by | |
14 | the Free Software Foundation; version 2 of the License. | |
15 | ||
16 | This program is distributed in the hope that it will be useful, | |
17 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
18 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
19 | GNU General Public License for more details. | |
20 | ||
21 | NO WARRANTY | |
22 | THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
23 | CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
24 | LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
25 | MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
26 | solely responsible for determining the appropriateness of using and | |
27 | distributing the Program and assumes all risks associated with its | |
28 | exercise of rights under this Agreement, including but not limited to | |
29 | the risks and costs of program errors, damage to or loss of data, | |
30 | programs or equipment, and unavailability or interruption of operations. | |
31 | ||
32 | DISCLAIMER OF LIABILITY | |
33 | NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
34 | DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
35 | DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
36 | ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
37 | TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
38 | USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
39 | HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
40 | ||
41 | You should have received a copy of the GNU General Public License | |
42 | along with this program; if not, write to the Free Software | |
43 | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
44 | */ | |
45 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
46 | ||
47 | #include "linux_compat.h" /* linux-2.6 tweaks */ | |
48 | #include <linux/module.h> | |
49 | #include <linux/kernel.h> | |
50 | #include <linux/init.h> | |
51 | #include <linux/errno.h> | |
52 | #include <linux/kdev_t.h> | |
53 | #include <linux/blkdev.h> | |
54 | #include <linux/delay.h> /* for mdelay */ | |
55 | #include <linux/interrupt.h> /* needed for in_interrupt() proto */ | |
56 | #include <linux/reboot.h> /* notifier code */ | |
57 | #include <linux/sched.h> | |
58 | #include <linux/workqueue.h> | |
c92f222e | 59 | #include <linux/raid_class.h> |
243eabcf MED |
60 | |
61 | #include <scsi/scsi.h> | |
62 | #include <scsi/scsi_cmnd.h> | |
63 | #include <scsi/scsi_device.h> | |
64 | #include <scsi/scsi_host.h> | |
65 | #include <scsi/scsi_tcq.h> | |
c92f222e JB |
66 | #include <scsi/scsi_transport.h> |
67 | #include <scsi/scsi_transport_spi.h> | |
243eabcf MED |
68 | |
69 | #include "mptbase.h" | |
70 | #include "mptscsih.h" | |
71 | ||
72 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
73 | #define my_NAME "Fusion MPT SPI Host driver" | |
74 | #define my_VERSION MPT_LINUX_VERSION_COMMON | |
75 | #define MYNAM "mptspi" | |
76 | ||
77 | MODULE_AUTHOR(MODULEAUTHOR); | |
78 | MODULE_DESCRIPTION(my_NAME); | |
79 | MODULE_LICENSE("GPL"); | |
80 | ||
81 | /* Command line args */ | |
243eabcf MED |
82 | static int mpt_saf_te = MPTSCSIH_SAF_TE; |
83 | module_param(mpt_saf_te, int, 0); | |
84 | MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)"); | |
85 | ||
86 | static int mpt_pq_filter = 0; | |
87 | module_param(mpt_pq_filter, int, 0); | |
88 | MODULE_PARM_DESC(mpt_pq_filter, " Enable peripheral qualifier filter: enable=1 (default=0)"); | |
89 | ||
c92f222e JB |
90 | static void mptspi_write_offset(struct scsi_target *, int); |
91 | static void mptspi_write_width(struct scsi_target *, int); | |
92 | static int mptspi_write_spi_device_pg1(struct scsi_target *, | |
93 | struct _CONFIG_PAGE_SCSI_DEVICE_1 *); | |
94 | ||
95 | static struct scsi_transport_template *mptspi_transport_template = NULL; | |
96 | ||
243eabcf MED |
97 | static int mptspiDoneCtx = -1; |
98 | static int mptspiTaskCtx = -1; | |
99 | static int mptspiInternalCtx = -1; /* Used only for internal commands */ | |
100 | ||
c92f222e JB |
101 | static int mptspi_target_alloc(struct scsi_target *starget) |
102 | { | |
103 | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | |
104 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata; | |
105 | int ret; | |
106 | ||
107 | if (hd == NULL) | |
108 | return -ENODEV; | |
109 | ||
110 | ret = mptscsih_target_alloc(starget); | |
111 | if (ret) | |
112 | return ret; | |
113 | ||
114 | /* if we're a device on virtual channel 1 and we're not part | |
115 | * of an array, just return here (otherwise the setup below | |
116 | * may actually affect a real physical device on channel 0 */ | |
117 | if (starget->channel == 1 && | |
118 | mptscsih_raid_id_to_num(hd, starget->id) < 0) | |
119 | return 0; | |
120 | ||
121 | if (hd->ioc->spi_data.nvram && | |
122 | hd->ioc->spi_data.nvram[starget->id] != MPT_HOST_NVRAM_INVALID) { | |
123 | u32 nvram = hd->ioc->spi_data.nvram[starget->id]; | |
124 | spi_min_period(starget) = (nvram & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT; | |
125 | spi_max_width(starget) = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; | |
126 | } else { | |
127 | spi_min_period(starget) = hd->ioc->spi_data.minSyncFactor; | |
128 | spi_max_width(starget) = hd->ioc->spi_data.maxBusWidth; | |
129 | } | |
130 | spi_max_offset(starget) = hd->ioc->spi_data.maxSyncOffset; | |
131 | ||
132 | spi_offset(starget) = 0; | |
133 | mptspi_write_width(starget, 0); | |
134 | ||
135 | return 0; | |
136 | } | |
137 | ||
138 | static int mptspi_read_spi_device_pg0(struct scsi_target *starget, | |
139 | struct _CONFIG_PAGE_SCSI_DEVICE_0 *pass_pg0) | |
140 | { | |
141 | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | |
142 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata; | |
143 | struct _MPT_ADAPTER *ioc = hd->ioc; | |
144 | struct _CONFIG_PAGE_SCSI_DEVICE_0 *pg0; | |
145 | dma_addr_t pg0_dma; | |
146 | int size; | |
147 | struct _x_config_parms cfg; | |
148 | struct _CONFIG_PAGE_HEADER hdr; | |
149 | int err = -EBUSY; | |
150 | ||
151 | /* No SPI parameters for RAID devices */ | |
152 | if (starget->channel == 0 && | |
153 | (hd->ioc->raid_data.isRaid & (1 << starget->id))) | |
154 | return -1; | |
155 | ||
156 | size = ioc->spi_data.sdp0length * 4; | |
157 | /* | |
158 | if (ioc->spi_data.sdp0length & 1) | |
159 | size += size + 4; | |
160 | size += 2048; | |
161 | */ | |
162 | ||
163 | pg0 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg0_dma, GFP_KERNEL); | |
164 | if (pg0 == NULL) { | |
165 | starget_printk(KERN_ERR, starget, "dma_alloc_coherent for parameters failed\n"); | |
166 | return -EINVAL; | |
167 | } | |
168 | ||
169 | memset(&hdr, 0, sizeof(hdr)); | |
170 | ||
171 | hdr.PageVersion = ioc->spi_data.sdp0version; | |
172 | hdr.PageLength = ioc->spi_data.sdp0length; | |
173 | hdr.PageNumber = 0; | |
174 | hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; | |
175 | ||
176 | memset(&cfg, 0, sizeof(cfg)); | |
177 | ||
178 | cfg.cfghdr.hdr = &hdr; | |
179 | cfg.physAddr = pg0_dma; | |
180 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
181 | cfg.dir = 0; | |
182 | cfg.pageAddr = starget->id; | |
183 | ||
184 | if (mpt_config(ioc, &cfg)) { | |
185 | starget_printk(KERN_ERR, starget, "mpt_config failed\n"); | |
186 | goto out_free; | |
187 | } | |
188 | err = 0; | |
189 | memcpy(pass_pg0, pg0, size); | |
190 | ||
191 | out_free: | |
192 | dma_free_coherent(&ioc->pcidev->dev, size, pg0, pg0_dma); | |
193 | return err; | |
194 | } | |
195 | ||
196 | static u32 mptspi_getRP(struct scsi_target *starget) | |
197 | { | |
198 | u32 nego = 0; | |
199 | ||
200 | nego |= spi_iu(starget) ? MPI_SCSIDEVPAGE1_RP_IU : 0; | |
201 | nego |= spi_dt(starget) ? MPI_SCSIDEVPAGE1_RP_DT : 0; | |
202 | nego |= spi_qas(starget) ? MPI_SCSIDEVPAGE1_RP_QAS : 0; | |
203 | nego |= spi_hold_mcs(starget) ? MPI_SCSIDEVPAGE1_RP_HOLD_MCS : 0; | |
204 | nego |= spi_wr_flow(starget) ? MPI_SCSIDEVPAGE1_RP_WR_FLOW : 0; | |
205 | nego |= spi_rd_strm(starget) ? MPI_SCSIDEVPAGE1_RP_RD_STRM : 0; | |
206 | nego |= spi_rti(starget) ? MPI_SCSIDEVPAGE1_RP_RTI : 0; | |
207 | nego |= spi_pcomp_en(starget) ? MPI_SCSIDEVPAGE1_RP_PCOMP_EN : 0; | |
208 | ||
209 | nego |= (spi_period(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD) & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK; | |
210 | nego |= (spi_offset(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET) & MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK; | |
211 | nego |= spi_width(starget) ? MPI_SCSIDEVPAGE1_RP_WIDE : 0; | |
212 | ||
213 | return nego; | |
214 | } | |
215 | ||
216 | static void mptspi_read_parameters(struct scsi_target *starget) | |
217 | { | |
218 | int nego; | |
219 | struct _CONFIG_PAGE_SCSI_DEVICE_0 pg0; | |
220 | ||
221 | mptspi_read_spi_device_pg0(starget, &pg0); | |
222 | ||
223 | nego = le32_to_cpu(pg0.NegotiatedParameters); | |
224 | ||
225 | spi_iu(starget) = (nego & MPI_SCSIDEVPAGE0_NP_IU) ? 1 : 0; | |
226 | spi_dt(starget) = (nego & MPI_SCSIDEVPAGE0_NP_DT) ? 1 : 0; | |
227 | spi_qas(starget) = (nego & MPI_SCSIDEVPAGE0_NP_QAS) ? 1 : 0; | |
228 | spi_wr_flow(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WR_FLOW) ? 1 : 0; | |
229 | spi_rd_strm(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RD_STRM) ? 1 : 0; | |
230 | spi_rti(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RTI) ? 1 : 0; | |
231 | spi_pcomp_en(starget) = (nego & MPI_SCSIDEVPAGE0_NP_PCOMP_EN) ? 1 : 0; | |
232 | spi_hold_mcs(starget) = (nego & MPI_SCSIDEVPAGE0_NP_HOLD_MCS) ? 1 : 0; | |
233 | spi_period(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD; | |
234 | spi_offset(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET; | |
235 | spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0; | |
236 | } | |
237 | ||
238 | static int | |
239 | mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, int disk) | |
240 | { | |
241 | MpiRaidActionRequest_t *pReq; | |
242 | MPT_FRAME_HDR *mf; | |
243 | ||
244 | /* Get and Populate a free Frame | |
245 | */ | |
246 | if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) { | |
247 | ddvprintk((MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n", | |
248 | hd->ioc->name)); | |
249 | return -EAGAIN; | |
250 | } | |
251 | pReq = (MpiRaidActionRequest_t *)mf; | |
252 | if (quiesce) | |
253 | pReq->Action = MPI_RAID_ACTION_QUIESCE_PHYS_IO; | |
254 | else | |
255 | pReq->Action = MPI_RAID_ACTION_ENABLE_PHYS_IO; | |
256 | pReq->Reserved1 = 0; | |
257 | pReq->ChainOffset = 0; | |
258 | pReq->Function = MPI_FUNCTION_RAID_ACTION; | |
259 | pReq->VolumeID = disk; | |
260 | pReq->VolumeBus = 0; | |
261 | pReq->PhysDiskNum = 0; | |
262 | pReq->MsgFlags = 0; | |
263 | pReq->Reserved2 = 0; | |
264 | pReq->ActionDataWord = 0; /* Reserved for this action */ | |
265 | ||
266 | mpt_add_sge((char *)&pReq->ActionDataSGE, | |
267 | MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1); | |
268 | ||
269 | ddvprintk((MYIOC_s_INFO_FMT "RAID Volume action %x id %d\n", | |
270 | hd->ioc->name, action, io->id)); | |
271 | ||
272 | hd->pLocal = NULL; | |
273 | hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */ | |
274 | hd->scandv_wait_done = 0; | |
275 | ||
276 | /* Save cmd pointer, for resource free if timeout or | |
277 | * FW reload occurs | |
278 | */ | |
279 | hd->cmdPtr = mf; | |
280 | ||
281 | add_timer(&hd->timer); | |
282 | mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf); | |
283 | wait_event(hd->scandv_waitq, hd->scandv_wait_done); | |
284 | ||
285 | if ((hd->pLocal == NULL) || (hd->pLocal->completion != 0)) | |
286 | return -1; | |
287 | ||
288 | return 0; | |
289 | } | |
290 | ||
291 | static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd, | |
292 | struct scsi_device *sdev) | |
293 | { | |
294 | VirtTarget *vtarget = scsi_target(sdev)->hostdata; | |
295 | ||
296 | /* no DV on RAID devices */ | |
297 | if (sdev->channel == 0 && | |
298 | (hd->ioc->raid_data.isRaid & (1 << sdev->id))) | |
299 | return; | |
300 | ||
301 | /* If this is a piece of a RAID, then quiesce first */ | |
302 | if (sdev->channel == 1 && | |
303 | mptscsih_quiesce_raid(hd, 1, vtarget->target_id) < 0) { | |
304 | starget_printk(KERN_ERR, scsi_target(sdev), | |
305 | "Integrated RAID quiesce failed\n"); | |
306 | return; | |
307 | } | |
308 | ||
309 | spi_dv_device(sdev); | |
310 | ||
311 | if (sdev->channel == 1 && | |
312 | mptscsih_quiesce_raid(hd, 0, vtarget->target_id) < 0) | |
313 | starget_printk(KERN_ERR, scsi_target(sdev), | |
314 | "Integrated RAID resume failed\n"); | |
315 | ||
316 | mptspi_read_parameters(sdev->sdev_target); | |
317 | spi_display_xfer_agreement(sdev->sdev_target); | |
318 | mptspi_read_parameters(sdev->sdev_target); | |
319 | } | |
320 | ||
321 | static int mptspi_slave_alloc(struct scsi_device *sdev) | |
322 | { | |
323 | int ret; | |
324 | MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata; | |
325 | /* gcc doesn't see that all uses of this variable occur within | |
326 | * the if() statements, so stop it from whining */ | |
327 | int physdisknum = 0; | |
328 | ||
329 | if (sdev->channel == 1) { | |
330 | physdisknum = mptscsih_raid_id_to_num(hd, sdev->id); | |
331 | ||
332 | if (physdisknum < 0) | |
333 | return physdisknum; | |
334 | } | |
335 | ||
336 | ret = mptscsih_slave_alloc(sdev); | |
337 | ||
338 | if (ret) | |
339 | return ret; | |
340 | ||
341 | if (sdev->channel == 1) { | |
342 | VirtDevice *vdev = sdev->hostdata; | |
343 | sdev->no_uld_attach = 1; | |
344 | vdev->vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT; | |
345 | /* The real channel for this device is zero */ | |
346 | vdev->bus_id = 0; | |
347 | /* The actual physdisknum (for RAID passthrough) */ | |
348 | vdev->target_id = physdisknum; | |
349 | } | |
350 | ||
351 | return 0; | |
352 | } | |
353 | ||
354 | static int mptspi_slave_configure(struct scsi_device *sdev) | |
355 | { | |
356 | int ret = mptscsih_slave_configure(sdev); | |
357 | struct _MPT_SCSI_HOST *hd = | |
358 | (struct _MPT_SCSI_HOST *)sdev->host->hostdata; | |
359 | ||
360 | if (ret) | |
361 | return ret; | |
362 | ||
363 | if ((sdev->channel == 1 || | |
364 | !(hd->ioc->raid_data.isRaid & (1 << sdev->id))) && | |
365 | !spi_initial_dv(sdev->sdev_target)) | |
366 | mptspi_dv_device(hd, sdev); | |
367 | ||
368 | return 0; | |
369 | } | |
370 | ||
371 | static void mptspi_slave_destroy(struct scsi_device *sdev) | |
372 | { | |
373 | struct scsi_target *starget = scsi_target(sdev); | |
374 | VirtTarget *vtarget = starget->hostdata; | |
375 | VirtDevice *vdevice = sdev->hostdata; | |
376 | ||
377 | /* Will this be the last lun on a non-raid device? */ | |
378 | if (vtarget->num_luns == 1 && vdevice->configured_lun) { | |
379 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
380 | ||
381 | /* Async Narrow */ | |
382 | pg1.RequestedParameters = 0; | |
383 | pg1.Reserved = 0; | |
384 | pg1.Configuration = 0; | |
385 | ||
386 | mptspi_write_spi_device_pg1(starget, &pg1); | |
387 | } | |
388 | ||
389 | mptscsih_slave_destroy(sdev); | |
390 | } | |
391 | ||
243eabcf | 392 | static struct scsi_host_template mptspi_driver_template = { |
f78496da | 393 | .module = THIS_MODULE, |
243eabcf MED |
394 | .proc_name = "mptspi", |
395 | .proc_info = mptscsih_proc_info, | |
396 | .name = "MPT SPI Host", | |
397 | .info = mptscsih_info, | |
398 | .queuecommand = mptscsih_qcmd, | |
c92f222e JB |
399 | .target_alloc = mptspi_target_alloc, |
400 | .slave_alloc = mptspi_slave_alloc, | |
401 | .slave_configure = mptspi_slave_configure, | |
c7c82987 | 402 | .target_destroy = mptscsih_target_destroy, |
c92f222e | 403 | .slave_destroy = mptspi_slave_destroy, |
6e3815ba | 404 | .change_queue_depth = mptscsih_change_queue_depth, |
243eabcf MED |
405 | .eh_abort_handler = mptscsih_abort, |
406 | .eh_device_reset_handler = mptscsih_dev_reset, | |
407 | .eh_bus_reset_handler = mptscsih_bus_reset, | |
408 | .eh_host_reset_handler = mptscsih_host_reset, | |
409 | .bios_param = mptscsih_bios_param, | |
410 | .can_queue = MPT_SCSI_CAN_QUEUE, | |
411 | .this_id = -1, | |
412 | .sg_tablesize = MPT_SCSI_SG_DEPTH, | |
413 | .max_sectors = 8192, | |
414 | .cmd_per_lun = 7, | |
415 | .use_clustering = ENABLE_CLUSTERING, | |
243eabcf MED |
416 | }; |
417 | ||
c92f222e JB |
418 | static int mptspi_write_spi_device_pg1(struct scsi_target *starget, |
419 | struct _CONFIG_PAGE_SCSI_DEVICE_1 *pass_pg1) | |
420 | { | |
421 | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | |
422 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata; | |
423 | struct _MPT_ADAPTER *ioc = hd->ioc; | |
424 | struct _CONFIG_PAGE_SCSI_DEVICE_1 *pg1; | |
425 | dma_addr_t pg1_dma; | |
426 | int size; | |
427 | struct _x_config_parms cfg; | |
428 | struct _CONFIG_PAGE_HEADER hdr; | |
429 | int err = -EBUSY; | |
430 | ||
431 | /* don't allow updating nego parameters on RAID devices */ | |
432 | if (starget->channel == 0 && | |
433 | (hd->ioc->raid_data.isRaid & (1 << starget->id))) | |
434 | return -1; | |
435 | ||
436 | size = ioc->spi_data.sdp1length * 4; | |
437 | ||
438 | pg1 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg1_dma, GFP_KERNEL); | |
439 | if (pg1 == NULL) { | |
440 | starget_printk(KERN_ERR, starget, "dma_alloc_coherent for parameters failed\n"); | |
441 | return -EINVAL; | |
442 | } | |
443 | ||
444 | memset(&hdr, 0, sizeof(hdr)); | |
445 | ||
446 | hdr.PageVersion = ioc->spi_data.sdp1version; | |
447 | hdr.PageLength = ioc->spi_data.sdp1length; | |
448 | hdr.PageNumber = 1; | |
449 | hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; | |
450 | ||
451 | memset(&cfg, 0, sizeof(cfg)); | |
452 | ||
453 | cfg.cfghdr.hdr = &hdr; | |
454 | cfg.physAddr = pg1_dma; | |
455 | cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; | |
456 | cfg.dir = 1; | |
457 | cfg.pageAddr = starget->id; | |
458 | ||
459 | memcpy(pg1, pass_pg1, size); | |
460 | ||
461 | pg1->Header.PageVersion = hdr.PageVersion; | |
462 | pg1->Header.PageLength = hdr.PageLength; | |
463 | pg1->Header.PageNumber = hdr.PageNumber; | |
464 | pg1->Header.PageType = hdr.PageType; | |
465 | ||
466 | if (mpt_config(ioc, &cfg)) { | |
467 | starget_printk(KERN_ERR, starget, "mpt_config failed\n"); | |
468 | goto out_free; | |
469 | } | |
470 | err = 0; | |
471 | ||
472 | out_free: | |
473 | dma_free_coherent(&ioc->pcidev->dev, size, pg1, pg1_dma); | |
474 | return err; | |
475 | } | |
476 | ||
477 | static void mptspi_write_offset(struct scsi_target *starget, int offset) | |
478 | { | |
479 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
480 | u32 nego; | |
481 | ||
482 | if (offset < 0) | |
483 | offset = 0; | |
484 | ||
485 | if (offset > 255) | |
486 | offset = 255; | |
487 | ||
488 | if (spi_offset(starget) == -1) | |
489 | mptspi_read_parameters(starget); | |
490 | ||
491 | spi_offset(starget) = offset; | |
492 | ||
493 | nego = mptspi_getRP(starget); | |
494 | ||
495 | pg1.RequestedParameters = cpu_to_le32(nego); | |
496 | pg1.Reserved = 0; | |
497 | pg1.Configuration = 0; | |
498 | ||
499 | mptspi_write_spi_device_pg1(starget, &pg1); | |
500 | } | |
501 | ||
502 | static void mptspi_write_period(struct scsi_target *starget, int period) | |
503 | { | |
504 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
505 | u32 nego; | |
506 | ||
507 | if (period < 8) | |
508 | period = 8; | |
509 | ||
510 | if (period > 255) | |
511 | period = 255; | |
512 | ||
513 | if (spi_period(starget) == -1) | |
514 | mptspi_read_parameters(starget); | |
515 | ||
516 | if (period == 8) { | |
517 | spi_iu(starget) = 1; | |
518 | spi_dt(starget) = 1; | |
519 | } else if (period == 9) { | |
520 | spi_dt(starget) = 1; | |
521 | } | |
522 | ||
523 | spi_period(starget) = period; | |
524 | ||
525 | nego = mptspi_getRP(starget); | |
526 | ||
527 | pg1.RequestedParameters = cpu_to_le32(nego); | |
528 | pg1.Reserved = 0; | |
529 | pg1.Configuration = 0; | |
530 | ||
531 | mptspi_write_spi_device_pg1(starget, &pg1); | |
532 | } | |
533 | ||
534 | static void mptspi_write_dt(struct scsi_target *starget, int dt) | |
535 | { | |
536 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
537 | u32 nego; | |
538 | ||
539 | if (spi_period(starget) == -1) | |
540 | mptspi_read_parameters(starget); | |
541 | ||
542 | if (!dt && spi_period(starget) < 10) | |
543 | spi_period(starget) = 10; | |
544 | ||
545 | spi_dt(starget) = dt; | |
546 | ||
547 | nego = mptspi_getRP(starget); | |
548 | ||
549 | ||
550 | pg1.RequestedParameters = cpu_to_le32(nego); | |
551 | pg1.Reserved = 0; | |
552 | pg1.Configuration = 0; | |
553 | ||
554 | mptspi_write_spi_device_pg1(starget, &pg1); | |
555 | } | |
556 | ||
557 | static void mptspi_write_iu(struct scsi_target *starget, int iu) | |
558 | { | |
559 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
560 | u32 nego; | |
561 | ||
562 | if (spi_period(starget) == -1) | |
563 | mptspi_read_parameters(starget); | |
564 | ||
565 | if (!iu && spi_period(starget) < 9) | |
566 | spi_period(starget) = 9; | |
567 | ||
568 | spi_iu(starget) = iu; | |
569 | ||
570 | nego = mptspi_getRP(starget); | |
571 | ||
572 | pg1.RequestedParameters = cpu_to_le32(nego); | |
573 | pg1.Reserved = 0; | |
574 | pg1.Configuration = 0; | |
575 | ||
576 | mptspi_write_spi_device_pg1(starget, &pg1); | |
577 | } | |
578 | ||
579 | #define MPTSPI_SIMPLE_TRANSPORT_PARM(parm) \ | |
580 | static void mptspi_write_##parm(struct scsi_target *starget, int parm)\ | |
581 | { \ | |
582 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; \ | |
583 | u32 nego; \ | |
584 | \ | |
585 | spi_##parm(starget) = parm; \ | |
586 | \ | |
587 | nego = mptspi_getRP(starget); \ | |
588 | \ | |
589 | pg1.RequestedParameters = cpu_to_le32(nego); \ | |
590 | pg1.Reserved = 0; \ | |
591 | pg1.Configuration = 0; \ | |
592 | \ | |
593 | mptspi_write_spi_device_pg1(starget, &pg1); \ | |
594 | } | |
595 | ||
596 | MPTSPI_SIMPLE_TRANSPORT_PARM(rd_strm) | |
597 | MPTSPI_SIMPLE_TRANSPORT_PARM(wr_flow) | |
598 | MPTSPI_SIMPLE_TRANSPORT_PARM(rti) | |
599 | MPTSPI_SIMPLE_TRANSPORT_PARM(hold_mcs) | |
600 | MPTSPI_SIMPLE_TRANSPORT_PARM(pcomp_en) | |
601 | ||
602 | static void mptspi_write_qas(struct scsi_target *starget, int qas) | |
603 | { | |
604 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
605 | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | |
606 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata; | |
607 | VirtTarget *vtarget = starget->hostdata; | |
608 | u32 nego; | |
609 | ||
610 | if ((vtarget->negoFlags & MPT_TARGET_NO_NEGO_QAS) || | |
611 | hd->ioc->spi_data.noQas) | |
612 | spi_qas(starget) = 0; | |
613 | else | |
614 | spi_qas(starget) = qas; | |
615 | ||
616 | nego = mptspi_getRP(starget); | |
617 | ||
618 | pg1.RequestedParameters = cpu_to_le32(nego); | |
619 | pg1.Reserved = 0; | |
620 | pg1.Configuration = 0; | |
621 | ||
622 | mptspi_write_spi_device_pg1(starget, &pg1); | |
623 | } | |
624 | ||
625 | static void mptspi_write_width(struct scsi_target *starget, int width) | |
626 | { | |
627 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
628 | u32 nego; | |
629 | ||
630 | if (!width) { | |
631 | spi_dt(starget) = 0; | |
632 | if (spi_period(starget) < 10) | |
633 | spi_period(starget) = 10; | |
634 | } | |
635 | ||
636 | spi_width(starget) = width; | |
637 | ||
638 | nego = mptspi_getRP(starget); | |
639 | ||
640 | pg1.RequestedParameters = cpu_to_le32(nego); | |
641 | pg1.Reserved = 0; | |
642 | pg1.Configuration = 0; | |
643 | ||
644 | mptspi_write_spi_device_pg1(starget, &pg1); | |
645 | } | |
646 | ||
647 | struct work_queue_wrapper { | |
648 | struct work_struct work; | |
649 | struct _MPT_SCSI_HOST *hd; | |
650 | int disk; | |
651 | }; | |
652 | ||
653 | static void mpt_work_wrapper(void *data) | |
654 | { | |
655 | struct work_queue_wrapper *wqw = (struct work_queue_wrapper *)data; | |
656 | struct _MPT_SCSI_HOST *hd = wqw->hd; | |
657 | struct Scsi_Host *shost = hd->ioc->sh; | |
658 | struct scsi_device *sdev; | |
659 | int disk = wqw->disk; | |
660 | struct _CONFIG_PAGE_IOC_3 *pg3; | |
661 | ||
662 | kfree(wqw); | |
663 | ||
664 | mpt_findImVolumes(hd->ioc); | |
665 | pg3 = hd->ioc->raid_data.pIocPg3; | |
666 | if (!pg3) | |
667 | return; | |
668 | ||
669 | shost_for_each_device(sdev,shost) { | |
670 | struct scsi_target *starget = scsi_target(sdev); | |
671 | VirtTarget *vtarget = starget->hostdata; | |
672 | ||
673 | /* only want to search RAID components */ | |
674 | if (sdev->channel != 1) | |
675 | continue; | |
676 | ||
677 | /* The target_id is the raid PhysDiskNum, even if | |
678 | * starget->id is the actual target address */ | |
679 | if(vtarget->target_id != disk) | |
680 | continue; | |
681 | ||
682 | starget_printk(KERN_INFO, vtarget->starget, | |
683 | "Integrated RAID requests DV of new device\n"); | |
684 | mptspi_dv_device(hd, sdev); | |
685 | } | |
686 | shost_printk(KERN_INFO, shost, | |
687 | "Integrated RAID detects new device %d\n", disk); | |
688 | scsi_scan_target(&hd->ioc->sh->shost_gendev, 1, disk, 0, 1); | |
689 | } | |
690 | ||
691 | ||
692 | static void mpt_dv_raid(struct _MPT_SCSI_HOST *hd, int disk) | |
693 | { | |
694 | struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC); | |
695 | ||
696 | if (!wqw) { | |
697 | shost_printk(KERN_ERR, hd->ioc->sh, | |
698 | "Failed to act on RAID event for physical disk %d\n", | |
699 | disk); | |
700 | return; | |
701 | } | |
702 | INIT_WORK(&wqw->work, mpt_work_wrapper, wqw); | |
703 | wqw->hd = hd; | |
704 | wqw->disk = disk; | |
705 | ||
706 | schedule_work(&wqw->work); | |
707 | } | |
708 | ||
709 | static int | |
710 | mptspi_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) | |
711 | { | |
712 | u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; | |
713 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)ioc->sh->hostdata; | |
714 | ||
715 | if (hd && event == MPI_EVENT_INTEGRATED_RAID) { | |
716 | int reason | |
717 | = (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16; | |
718 | ||
719 | if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { | |
720 | int disk = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24; | |
721 | mpt_dv_raid(hd, disk); | |
722 | } | |
723 | } | |
724 | return mptscsih_event_process(ioc, pEvReply); | |
725 | } | |
726 | ||
727 | static int | |
728 | mptspi_deny_binding(struct scsi_target *starget) | |
729 | { | |
730 | struct _MPT_SCSI_HOST *hd = | |
731 | (struct _MPT_SCSI_HOST *)dev_to_shost(starget->dev.parent)->hostdata; | |
732 | return ((hd->ioc->raid_data.isRaid & (1 << starget->id)) && | |
733 | starget->channel == 0) ? 1 : 0; | |
734 | } | |
735 | ||
736 | static struct spi_function_template mptspi_transport_functions = { | |
737 | .get_offset = mptspi_read_parameters, | |
738 | .set_offset = mptspi_write_offset, | |
739 | .show_offset = 1, | |
740 | .get_period = mptspi_read_parameters, | |
741 | .set_period = mptspi_write_period, | |
742 | .show_period = 1, | |
743 | .get_width = mptspi_read_parameters, | |
744 | .set_width = mptspi_write_width, | |
745 | .show_width = 1, | |
746 | .get_iu = mptspi_read_parameters, | |
747 | .set_iu = mptspi_write_iu, | |
748 | .show_iu = 1, | |
749 | .get_dt = mptspi_read_parameters, | |
750 | .set_dt = mptspi_write_dt, | |
751 | .show_dt = 1, | |
752 | .get_qas = mptspi_read_parameters, | |
753 | .set_qas = mptspi_write_qas, | |
754 | .show_qas = 1, | |
755 | .get_wr_flow = mptspi_read_parameters, | |
756 | .set_wr_flow = mptspi_write_wr_flow, | |
757 | .show_wr_flow = 1, | |
758 | .get_rd_strm = mptspi_read_parameters, | |
759 | .set_rd_strm = mptspi_write_rd_strm, | |
760 | .show_rd_strm = 1, | |
761 | .get_rti = mptspi_read_parameters, | |
762 | .set_rti = mptspi_write_rti, | |
763 | .show_rti = 1, | |
764 | .get_pcomp_en = mptspi_read_parameters, | |
765 | .set_pcomp_en = mptspi_write_pcomp_en, | |
766 | .show_pcomp_en = 1, | |
767 | .get_hold_mcs = mptspi_read_parameters, | |
768 | .set_hold_mcs = mptspi_write_hold_mcs, | |
769 | .show_hold_mcs = 1, | |
770 | .deny_binding = mptspi_deny_binding, | |
771 | }; | |
243eabcf MED |
772 | |
773 | /**************************************************************************** | |
774 | * Supported hardware | |
775 | */ | |
776 | ||
777 | static struct pci_device_id mptspi_pci_table[] = { | |
778 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030, | |
779 | PCI_ANY_ID, PCI_ANY_ID }, | |
780 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_1030_53C1035, | |
781 | PCI_ANY_ID, PCI_ANY_ID }, | |
782 | {0} /* Terminating entry */ | |
783 | }; | |
784 | MODULE_DEVICE_TABLE(pci, mptspi_pci_table); | |
785 | ||
786 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
787 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
788 | /* | |
789 | * mptspi_probe - Installs scsi devices per bus. | |
790 | * @pdev: Pointer to pci_dev structure | |
791 | * | |
792 | * Returns 0 for success, non-zero for failure. | |
793 | * | |
794 | */ | |
795 | static int | |
796 | mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) | |
797 | { | |
798 | struct Scsi_Host *sh; | |
799 | MPT_SCSI_HOST *hd; | |
800 | MPT_ADAPTER *ioc; | |
801 | unsigned long flags; | |
1ca00bb7 | 802 | int ii; |
243eabcf MED |
803 | int numSGE = 0; |
804 | int scale; | |
805 | int ioc_cap; | |
243eabcf MED |
806 | int error=0; |
807 | int r; | |
c6678e0c | 808 | |
243eabcf MED |
809 | if ((r = mpt_attach(pdev,id)) != 0) |
810 | return r; | |
c6678e0c | 811 | |
243eabcf | 812 | ioc = pci_get_drvdata(pdev); |
d335cc38 MED |
813 | ioc->DoneCtx = mptspiDoneCtx; |
814 | ioc->TaskCtx = mptspiTaskCtx; | |
815 | ioc->InternalCtx = mptspiInternalCtx; | |
c6678e0c | 816 | |
243eabcf MED |
817 | /* Added sanity check on readiness of the MPT adapter. |
818 | */ | |
819 | if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { | |
820 | printk(MYIOC_s_WARN_FMT | |
821 | "Skipping because it's not operational!\n", | |
822 | ioc->name); | |
7acec1e7 MED |
823 | error = -ENODEV; |
824 | goto out_mptspi_probe; | |
243eabcf MED |
825 | } |
826 | ||
827 | if (!ioc->active) { | |
828 | printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", | |
829 | ioc->name); | |
7acec1e7 MED |
830 | error = -ENODEV; |
831 | goto out_mptspi_probe; | |
243eabcf MED |
832 | } |
833 | ||
834 | /* Sanity check - ensure at least 1 port is INITIATOR capable | |
835 | */ | |
836 | ioc_cap = 0; | |
837 | for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { | |
838 | if (ioc->pfacts[ii].ProtocolFlags & | |
839 | MPI_PORTFACTS_PROTOCOL_INITIATOR) | |
840 | ioc_cap ++; | |
841 | } | |
842 | ||
843 | if (!ioc_cap) { | |
844 | printk(MYIOC_s_WARN_FMT | |
845 | "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", | |
846 | ioc->name, ioc); | |
466544d8 | 847 | return 0; |
243eabcf MED |
848 | } |
849 | ||
850 | sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST)); | |
851 | ||
852 | if (!sh) { | |
853 | printk(MYIOC_s_WARN_FMT | |
854 | "Unable to register controller with SCSI subsystem\n", | |
855 | ioc->name); | |
7acec1e7 MED |
856 | error = -1; |
857 | goto out_mptspi_probe; | |
243eabcf MED |
858 | } |
859 | ||
860 | spin_lock_irqsave(&ioc->FreeQlock, flags); | |
861 | ||
862 | /* Attach the SCSI Host to the IOC structure | |
863 | */ | |
864 | ioc->sh = sh; | |
865 | ||
866 | sh->io_port = 0; | |
867 | sh->n_io_port = 0; | |
868 | sh->irq = 0; | |
869 | ||
870 | /* set 16 byte cdb's */ | |
871 | sh->max_cmd_len = 16; | |
872 | ||
873 | /* Yikes! This is important! | |
874 | * Otherwise, by default, linux | |
875 | * only scans target IDs 0-7! | |
876 | * pfactsN->MaxDevices unreliable | |
877 | * (not supported in early | |
878 | * versions of the FW). | |
879 | * max_id = 1 + actual max id, | |
880 | * max_lun = 1 + actual last lun, | |
881 | * see hosts.h :o( | |
882 | */ | |
883 | sh->max_id = MPT_MAX_SCSI_DEVICES; | |
884 | ||
885 | sh->max_lun = MPT_LAST_LUN + 1; | |
c92f222e JB |
886 | /* |
887 | * If RAID Firmware Detected, setup virtual channel | |
888 | */ | |
889 | if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) | |
890 | > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) | |
891 | sh->max_channel = 1; | |
892 | else | |
893 | sh->max_channel = 0; | |
243eabcf MED |
894 | sh->this_id = ioc->pfacts[0].PortSCSIID; |
895 | ||
896 | /* Required entry. | |
897 | */ | |
898 | sh->unique_id = ioc->id; | |
899 | ||
900 | /* Verify that we won't exceed the maximum | |
901 | * number of chain buffers | |
902 | * We can optimize: ZZ = req_sz/sizeof(SGE) | |
903 | * For 32bit SGE's: | |
904 | * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ | |
905 | * + (req_sz - 64)/sizeof(SGE) | |
906 | * A slightly different algorithm is required for | |
907 | * 64bit SGEs. | |
908 | */ | |
909 | scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32)); | |
910 | if (sizeof(dma_addr_t) == sizeof(u64)) { | |
911 | numSGE = (scale - 1) * | |
912 | (ioc->facts.MaxChainDepth-1) + scale + | |
913 | (ioc->req_sz - 60) / (sizeof(dma_addr_t) + | |
914 | sizeof(u32)); | |
915 | } else { | |
916 | numSGE = 1 + (scale - 1) * | |
917 | (ioc->facts.MaxChainDepth-1) + scale + | |
918 | (ioc->req_sz - 64) / (sizeof(dma_addr_t) + | |
919 | sizeof(u32)); | |
920 | } | |
921 | ||
922 | if (numSGE < sh->sg_tablesize) { | |
923 | /* Reset this value */ | |
924 | dprintk((MYIOC_s_INFO_FMT | |
925 | "Resetting sg_tablesize to %d from %d\n", | |
926 | ioc->name, numSGE, sh->sg_tablesize)); | |
927 | sh->sg_tablesize = numSGE; | |
928 | } | |
929 | ||
243eabcf MED |
930 | spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
931 | ||
932 | hd = (MPT_SCSI_HOST *) sh->hostdata; | |
933 | hd->ioc = ioc; | |
934 | ||
935 | /* SCSI needs scsi_cmnd lookup table! | |
936 | * (with size equal to req_depth*PtrSz!) | |
937 | */ | |
1ca00bb7 CH |
938 | hd->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC); |
939 | if (!hd->ScsiLookup) { | |
243eabcf | 940 | error = -ENOMEM; |
7acec1e7 | 941 | goto out_mptspi_probe; |
243eabcf MED |
942 | } |
943 | ||
1ca00bb7 CH |
944 | dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p\n", |
945 | ioc->name, hd->ScsiLookup)); | |
243eabcf MED |
946 | |
947 | /* Allocate memory for the device structures. | |
948 | * A non-Null pointer at an offset | |
949 | * indicates a device exists. | |
950 | * max_id = 1 + maximum id (hosts.h) | |
951 | */ | |
c92f222e JB |
952 | hd->Targets = kcalloc(sh->max_id * (sh->max_channel + 1), |
953 | sizeof(void *), GFP_ATOMIC); | |
1ca00bb7 | 954 | if (!hd->Targets) { |
243eabcf | 955 | error = -ENOMEM; |
7acec1e7 | 956 | goto out_mptspi_probe; |
243eabcf MED |
957 | } |
958 | ||
1ca00bb7 | 959 | dprintk((KERN_INFO " vdev @ %p\n", hd->Targets)); |
243eabcf MED |
960 | |
961 | /* Clear the TM flags | |
962 | */ | |
963 | hd->tmPending = 0; | |
964 | hd->tmState = TM_STATE_NONE; | |
965 | hd->resetPending = 0; | |
966 | hd->abortSCpnt = NULL; | |
967 | ||
968 | /* Clear the pointer used to store | |
969 | * single-threaded commands, i.e., those | |
970 | * issued during a bus scan, dv and | |
971 | * configuration pages. | |
972 | */ | |
973 | hd->cmdPtr = NULL; | |
974 | ||
975 | /* Initialize this SCSI Hosts' timers | |
976 | * To use, set the timer expires field | |
977 | * and add_timer | |
978 | */ | |
979 | init_timer(&hd->timer); | |
980 | hd->timer.data = (unsigned long) hd; | |
981 | hd->timer.function = mptscsih_timer_expired; | |
982 | ||
983 | ioc->spi_data.Saf_Te = mpt_saf_te; | |
984 | hd->mpt_pq_filter = mpt_pq_filter; | |
985 | ||
243eabcf MED |
986 | hd->negoNvram = MPT_SCSICFG_USE_NVRAM; |
987 | ddvprintk((MYIOC_s_INFO_FMT | |
988 | "saf_te %x mpt_pq_filter %x\n", | |
989 | ioc->name, | |
990 | mpt_saf_te, | |
991 | mpt_pq_filter)); | |
243eabcf MED |
992 | ioc->spi_data.noQas = 0; |
993 | ||
243eabcf MED |
994 | init_waitqueue_head(&hd->scandv_waitq); |
995 | hd->scandv_wait_done = 0; | |
996 | hd->last_queue_full = 0; | |
997 | ||
c92f222e JB |
998 | /* Some versions of the firmware don't support page 0; without |
999 | * that we can't get the parameters */ | |
1000 | if (hd->ioc->spi_data.sdp0length != 0) | |
1001 | sh->transportt = mptspi_transport_template; | |
1002 | ||
243eabcf MED |
1003 | error = scsi_add_host (sh, &ioc->pcidev->dev); |
1004 | if(error) { | |
1005 | dprintk((KERN_ERR MYNAM | |
1006 | "scsi_add_host failed\n")); | |
7acec1e7 | 1007 | goto out_mptspi_probe; |
243eabcf MED |
1008 | } |
1009 | ||
d8e925dc ME |
1010 | /* |
1011 | * issue internal bus reset | |
1012 | */ | |
1013 | if (ioc->spi_data.bus_reset) | |
1014 | mptscsih_TMHandler(hd, | |
1015 | MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, | |
1016 | 0, 0, 0, 0, 5); | |
1017 | ||
243eabcf MED |
1018 | scsi_scan_host(sh); |
1019 | return 0; | |
1020 | ||
7acec1e7 | 1021 | out_mptspi_probe: |
243eabcf MED |
1022 | |
1023 | mptscsih_remove(pdev); | |
1024 | return error; | |
1025 | } | |
1026 | ||
1027 | static struct pci_driver mptspi_driver = { | |
1028 | .name = "mptspi", | |
1029 | .id_table = mptspi_pci_table, | |
1030 | .probe = mptspi_probe, | |
1031 | .remove = __devexit_p(mptscsih_remove), | |
d18c3db5 | 1032 | .shutdown = mptscsih_shutdown, |
243eabcf MED |
1033 | #ifdef CONFIG_PM |
1034 | .suspend = mptscsih_suspend, | |
1035 | .resume = mptscsih_resume, | |
1036 | #endif | |
1037 | }; | |
1038 | ||
1039 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1040 | /** | |
1041 | * mptspi_init - Register MPT adapter(s) as SCSI host(s) with | |
1042 | * linux scsi mid-layer. | |
1043 | * | |
1044 | * Returns 0 for success, non-zero for failure. | |
1045 | */ | |
1046 | static int __init | |
1047 | mptspi_init(void) | |
1048 | { | |
243eabcf MED |
1049 | show_mptmod_ver(my_NAME, my_VERSION); |
1050 | ||
c92f222e JB |
1051 | mptspi_transport_template = spi_attach_transport(&mptspi_transport_functions); |
1052 | if (!mptspi_transport_template) | |
1053 | return -ENODEV; | |
1054 | ||
243eabcf MED |
1055 | mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER); |
1056 | mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER); | |
1057 | mptspiInternalCtx = mpt_register(mptscsih_scandv_complete, MPTSPI_DRIVER); | |
1058 | ||
c92f222e | 1059 | if (mpt_event_register(mptspiDoneCtx, mptspi_event_process) == 0) { |
243eabcf MED |
1060 | devtprintk((KERN_INFO MYNAM |
1061 | ": Registered for IOC event notifications\n")); | |
1062 | } | |
1063 | ||
1064 | if (mpt_reset_register(mptspiDoneCtx, mptscsih_ioc_reset) == 0) { | |
1065 | dprintk((KERN_INFO MYNAM | |
1066 | ": Registered for IOC reset notifications\n")); | |
1067 | } | |
1068 | ||
1069 | return pci_register_driver(&mptspi_driver); | |
1070 | } | |
1071 | ||
1072 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1073 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1074 | /** | |
1075 | * mptspi_exit - Unregisters MPT adapter(s) | |
1076 | * | |
1077 | */ | |
1078 | static void __exit | |
1079 | mptspi_exit(void) | |
1080 | { | |
1081 | pci_unregister_driver(&mptspi_driver); | |
d8e925dc | 1082 | |
243eabcf MED |
1083 | mpt_reset_deregister(mptspiDoneCtx); |
1084 | dprintk((KERN_INFO MYNAM | |
1085 | ": Deregistered for IOC reset notifications\n")); | |
1086 | ||
1087 | mpt_event_deregister(mptspiDoneCtx); | |
1088 | dprintk((KERN_INFO MYNAM | |
1089 | ": Deregistered for IOC event notifications\n")); | |
1090 | ||
1091 | mpt_deregister(mptspiInternalCtx); | |
1092 | mpt_deregister(mptspiTaskCtx); | |
1093 | mpt_deregister(mptspiDoneCtx); | |
c92f222e | 1094 | spi_release_transport(mptspi_transport_template); |
243eabcf MED |
1095 | } |
1096 | ||
1097 | module_init(mptspi_init); | |
1098 | module_exit(mptspi_exit); |