]>
Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
8a0a8e8e AB |
5 | if HAS_IOMEM |
6 | menu "Multifunction device drivers" | |
b6d6454f | 7 | |
aa613de6 DES |
8 | config MFD_CORE |
9 | tristate | |
10 | default n | |
11 | ||
2cc50bee HZ |
12 | config MFD_88PM860X |
13 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 14 | depends on I2C=y && GENERIC_HARDIRQS |
2cc50bee HZ |
15 | select MFD_CORE |
16 | help | |
17 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
18 | This includes the I2C driver and the core APIs _only_, you have to | |
19 | select individual components like voltage regulators, RTC and | |
20 | battery-charger under the corresponding menus. | |
21 | ||
b6d6454f BD |
22 | config MFD_SM501 |
23 | tristate "Support for Silicon Motion SM501" | |
24 | ---help--- | |
25 | This is the core driver for the Silicon Motion SM501 multimedia | |
26 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
27 | provide numerous interfaces including USB host controller, USB gadget, |
28 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
29 | interface. The device may be connected by PCI or local bus with |
30 | varying functions enabled. | |
31 | ||
f61be273 BD |
32 | config MFD_SM501_GPIO |
33 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 34 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
35 | ---help--- |
36 | This option uses the gpio library layer to export the 64 GPIO | |
37 | lines on the SM501. The platform data is used to supply the | |
38 | base number for the first GPIO line to register. | |
39 | ||
fa9ff4b1 SO |
40 | config MFD_ASIC3 |
41 | bool "Support for Compaq ASIC3" | |
2eedd604 | 42 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 43 | select MFD_CORE |
fa9ff4b1 SO |
44 | ---help--- |
45 | This driver supports the ASIC3 multifunction chip found on many | |
46 | PDAs (mainly iPAQ and HTC based ones) | |
47 | ||
ca26308c MA |
48 | config MFD_DAVINCI_VOICECODEC |
49 | tristate | |
50 | select MFD_CORE | |
51 | ||
0931a4c6 DB |
52 | config MFD_DM355EVM_MSP |
53 | bool "DaVinci DM355 EVM microcontroller" | |
1819ebcf | 54 | depends on I2C=y && MACH_DAVINCI_DM355_EVM |
0931a4c6 DB |
55 | help |
56 | This driver supports the MSP430 microcontroller used on these | |
57 | boards. MSP430 firmware manages resets and power sequencing, | |
58 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
59 | ||
03df0f62 CC |
60 | config MFD_TI_SSP |
61 | tristate "TI Sequencer Serial Port support" | |
62 | depends on ARCH_DAVINCI_TNETV107X | |
63 | select MFD_CORE | |
64 | ---help--- | |
65 | Say Y here if you want support for the Sequencer Serial Port | |
66 | in a Texas Instruments TNETV107X SoC. | |
67 | ||
68 | To compile this driver as a module, choose M here: the | |
69 | module will be called ti-ssp. | |
70 | ||
a1635b8f PZ |
71 | config HTC_EGPIO |
72 | bool "HTC EGPIO support" | |
7444a72e | 73 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
74 | help |
75 | This driver supports the CPLD egpio chip present on | |
76 | several HTC phones. It provides basic support for input | |
77 | pins, output pins, and irqs. | |
78 | ||
5dc3339a PZ |
79 | config HTC_PASIC3 |
80 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 81 | select MFD_CORE |
5dc3339a PZ |
82 | help |
83 | This core driver provides register access for the LED/DS1WM | |
84 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
85 | HTC Magician devices, respectively. Actual functionality is | |
86 | handled by the leds-pasic3 and ds1wm drivers. | |
87 | ||
6048a3dd CM |
88 | config HTC_I2CPLD |
89 | bool "HTC I2C PLD chip support" | |
bef3e20c | 90 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
91 | help |
92 | If you say yes here you get support for the supposed CPLD | |
93 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
94 | This device provides input and output GPIOs through an I2C | |
95 | interface to one or more sub-chips. | |
96 | ||
d9105c2b MV |
97 | config UCB1400_CORE |
98 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 99 | depends on AC97_BUS |
5a49a540 | 100 | depends on GPIOLIB |
d9105c2b MV |
101 | help |
102 | This enables support for the Philips UCB1400 core functions. | |
103 | The UCB1400 is an AC97 audio codec. | |
104 | ||
105 | To compile this driver as a module, choose M here: the | |
106 | module will be called ucb1400_core. | |
107 | ||
798a8eee LW |
108 | config TPS6105X |
109 | tristate "TPS61050/61052 Boost Converters" | |
110 | depends on I2C | |
2edd3b69 | 111 | select REGULATOR |
fc498fa2 | 112 | select MFD_CORE |
2edd3b69 | 113 | select REGULATOR_FIXED_VOLTAGE |
798a8eee LW |
114 | help |
115 | This option enables a driver for the TP61050/TPS61052 | |
116 | high-power "white LED driver". This boost converter is | |
117 | sometimes used for other things than white LEDs, and | |
118 | also contains a GPIO pin. | |
119 | ||
87c13493 DB |
120 | config TPS65010 |
121 | tristate "TPS6501x Power Management chips" | |
122 | depends on I2C && GPIOLIB | |
123 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
124 | help | |
125 | If you say yes here you get support for the TPS6501x series of | |
126 | Power Management chips. These include voltage regulators, | |
127 | lithium ion/polymer battery charging, and other features that | |
128 | are often used in portable devices like cell phones and cameras. | |
129 | ||
130 | This driver can also be built as a module. If so, the module | |
131 | will be called tps65010. | |
132 | ||
31dd6a26 TF |
133 | config TPS6507X |
134 | tristate "TPS6507x Power Management / Touch Screen chips" | |
135 | select MFD_CORE | |
136 | depends on I2C | |
137 | help | |
138 | If you say yes here you get support for the TPS6507x series of | |
139 | Power Management / Touch Screen chips. These include voltage | |
140 | regulators, lithium ion/polymer battery charging, touch screen | |
141 | and other features that are often used in portable devices. | |
142 | This driver can also be built as a module. If so, the module | |
143 | will be called tps6507x. | |
144 | ||
37df003c AL |
145 | config MFD_TPS6586X |
146 | bool "TPS6586x Power Management chips" | |
147 | depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS | |
148 | select MFD_CORE | |
149 | help | |
150 | If you say yes here you get support for the TPS6586X series of | |
151 | Power Management chips. | |
152 | This driver provides common support for accessing the device, | |
153 | additional drivers must be enabled in order to use the | |
154 | functionality of the device. | |
155 | ||
156 | This driver can also be built as a module. If so, the module | |
157 | will be called tps6586x. | |
158 | ||
54f323b1 LW |
159 | config MFD_TPS65910 |
160 | bool "TPS65910 Power Management chip" | |
161 | depends on I2C=y && GPIOLIB | |
162 | select MFD_CORE | |
163 | select GPIO_TPS65910 | |
164 | help | |
165 | if you say yes here you get support for the TPS65910 series of | |
166 | Power Management chips. | |
167 | ||
36e52873 | 168 | config MFD_TPS65912 |
5608801b | 169 | bool |
36e52873 MO |
170 | depends on GPIOLIB |
171 | ||
172 | config MFD_TPS65912_I2C | |
173 | bool "TPS95612 Power Management chip with I2C" | |
174 | select MFD_CORE | |
175 | select MFD_TPS65912 | |
176 | depends on I2C=y && GPIOLIB | |
177 | help | |
178 | If you say yes here you get support for the TPS65912 series of | |
179 | PM chips with I2C interface. | |
180 | ||
181 | config MFD_TPS65912_SPI | |
182 | bool "TPS65912 Power Management chip with SPI" | |
183 | select MFD_CORE | |
184 | select MFD_TPS65912 | |
185 | depends on SPI_MASTER && GPIOLIB | |
186 | help | |
187 | If you say yes here you get support for the TPS65912 series of | |
188 | PM chips with SPI interface. | |
189 | ||
88e75cc3 DB |
190 | config MENELAUS |
191 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 192 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
193 | help |
194 | If you say yes here you get support for the Texas Instruments | |
195 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 196 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
197 | and other features that are often used in portable devices like |
198 | cell phones and PDAs. | |
199 | ||
a603a7fa | 200 | config TWL4030_CORE |
e8deb28c | 201 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
67460a7c | 202 | depends on I2C=y && GENERIC_HARDIRQS |
a603a7fa | 203 | help |
e8deb28c | 204 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
205 | This core driver provides register access and IRQ handling |
206 | facilities, and registers devices for the various functions | |
207 | so that function-specific drivers can bind to them. | |
208 | ||
209 | These multi-function chips are found on many OMAP2 and OMAP3 | |
210 | boards, providing power management, RTC, GPIO, keypad, a | |
211 | high speed USB OTG transceiver, an audio codec (on most | |
212 | versions) and many other features. | |
213 | ||
f99c1d4f K |
214 | config TWL4030_MADC |
215 | tristate "Texas Instruments TWL4030 MADC" | |
216 | depends on TWL4030_CORE | |
217 | help | |
218 | This driver provides support for triton TWL4030-MADC. The | |
219 | driver supports both RT and SW conversion methods. | |
220 | ||
221 | This driver can be built as a module. If so it will be | |
222 | named twl4030-madc | |
223 | ||
ebf0bd36 AK |
224 | config TWL4030_POWER |
225 | bool "Support power resources on TWL4030 family chips" | |
226 | depends on TWL4030_CORE && ARM | |
227 | help | |
228 | Say yes here if you want to use the power resources on the | |
229 | TWL4030 family chips. Most of these resources are regulators, | |
230 | which have a separate driver; some are control signals, such | |
231 | as clock request handshaking. | |
232 | ||
233 | This driver uses board-specific data to initialize the resources | |
25985edc | 234 | and load scripts controlling which resources are switched off/on |
ebf0bd36 AK |
235 | or reset when a sleep, wakeup or warm reset event occurs. |
236 | ||
57fe7251 | 237 | config MFD_TWL4030_AUDIO |
0b83ddeb PU |
238 | bool |
239 | depends on TWL4030_CORE | |
240 | select MFD_CORE | |
241 | default n | |
242 | ||
31fc03df H |
243 | config TWL6030_PWM |
244 | tristate "TWL6030 PWM (Pulse Width Modulator) Support" | |
245 | depends on TWL4030_CORE | |
246 | select HAVE_PWM | |
247 | default n | |
248 | help | |
249 | Say yes here if you want support for TWL6030 PWM. | |
250 | This is used to control charging LED brightness. | |
251 | ||
f19b2823 MLC |
252 | config TWL6040_CORE |
253 | bool | |
254 | depends on TWL4030_CORE && GENERIC_HARDIRQS | |
255 | select MFD_CORE | |
256 | default n | |
257 | ||
27e34995 RV |
258 | config MFD_STMPE |
259 | bool "Support STMicroelectronics STMPE" | |
260 | depends on I2C=y && GENERIC_HARDIRQS | |
261 | select MFD_CORE | |
262 | help | |
263 | Support for the STMPE family of I/O Expanders from | |
264 | STMicroelectronics. | |
265 | ||
266 | Currently supported devices are: | |
267 | ||
268 | STMPE811: GPIO, Touchscreen | |
269 | STMPE1601: GPIO, Keypad | |
270 | STMPE2401: GPIO, Keypad | |
271 | STMPE2403: GPIO, Keypad | |
272 | ||
273 | This driver provides common support for accessing the device, | |
274 | additional drivers must be enabled in order to use the functionality | |
275 | of the device. Currently available sub drivers are: | |
276 | ||
277 | GPIO: stmpe-gpio | |
278 | Keypad: stmpe-keypad | |
279 | Touchscreen: stmpe-ts | |
280 | ||
f4e8afdc SI |
281 | config MFD_TC3589X |
282 | bool "Support Toshiba TC35892 and variants" | |
b4ecd326 RV |
283 | depends on I2C=y && GENERIC_HARDIRQS |
284 | select MFD_CORE | |
285 | help | |
f4e8afdc | 286 | Support for the Toshiba TC35892 and variants I/O Expander. |
b4ecd326 RV |
287 | |
288 | This driver provides common support for accessing the device, | |
289 | additional drivers must be enabled in order to use the | |
290 | functionality of the device. | |
291 | ||
1c2c30ac SO |
292 | config MFD_TMIO |
293 | bool | |
294 | default n | |
295 | ||
1f192015 IM |
296 | config MFD_T7L66XB |
297 | bool "Support Toshiba T7L66XB" | |
9ca68233 | 298 | depends on ARM && HAVE_CLK |
1f192015 | 299 | select MFD_CORE |
1c2c30ac | 300 | select MFD_TMIO |
1f192015 IM |
301 | help |
302 | Support for Toshiba Mobile IO Controller T7L66XB | |
303 | ||
cbdfb426 IM |
304 | config MFD_TC6387XB |
305 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 306 | depends on ARM && HAVE_CLK |
cbdfb426 | 307 | select MFD_CORE |
1c2c30ac | 308 | select MFD_TMIO |
cbdfb426 IM |
309 | help |
310 | Support for Toshiba Mobile IO Controller TC6387XB | |
311 | ||
d6315949 DES |
312 | config MFD_TC6393XB |
313 | bool "Support Toshiba TC6393XB" | |
8d25b36b | 314 | depends on GPIOLIB && ARM |
f024ff10 | 315 | select MFD_CORE |
1c2c30ac | 316 | select MFD_TMIO |
d6315949 DES |
317 | help |
318 | Support for Toshiba Mobile IO Controller TC6393XB | |
319 | ||
8e2eaabf SO |
320 | config PMIC_DA903X |
321 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
322 | depends on I2C=y | |
323 | help | |
324 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
325 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
326 | usually found on PXA processors-based platforms. This includes | |
327 | the I2C driver and the core APIs _only_, you have to select | |
328 | individual components like LCD backlight, voltage regulators, | |
329 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b MH |
330 | |
331 | config PMIC_ADP5520 | |
332 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
333 | depends on I2C=y | |
334 | help | |
335 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
336 | Multifunction Power Management IC. This includes | |
337 | the I2C driver and the core APIs _only_, you have to select | |
338 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
339 | under the corresponding menus. | |
8e2eaabf | 340 | |
d50f8f33 | 341 | config MFD_MAX8925 |
1f1cf8f9 | 342 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 343 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 344 | select MFD_CORE |
d50f8f33 HZ |
345 | help |
346 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
347 | a Power Management IC. This driver provies common support for | |
348 | accessing the device, additional drivers must be enabled in order | |
349 | to use the functionality of the device. | |
350 | ||
527e7e9a MH |
351 | config MFD_MAX8997 |
352 | bool "Maxim Semiconductor MAX8997/8966 PMIC Support" | |
353 | depends on I2C=y && GENERIC_HARDIRQS | |
354 | select MFD_CORE | |
355 | help | |
356 | Say yes here to support for Maxim Semiconductor MAX8998/8966. | |
357 | This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, | |
358 | MUIC controls on chip. | |
d7e8c01a | 359 | This driver provides common support for accessing the device; |
527e7e9a MH |
360 | additional drivers must be enabled in order to use the functionality |
361 | of the device. | |
362 | ||
156f2528 | 363 | config MFD_MAX8998 |
f8539ddc | 364 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
2c7e6f57 | 365 | depends on I2C=y && GENERIC_HARDIRQS |
156f2528 KP |
366 | select MFD_CORE |
367 | help | |
f8539ddc KP |
368 | Say yes here to support for Maxim Semiconductor MAX8998 and |
369 | National Semiconductor LP3974. This is a Power Management IC. | |
370 | This driver provies common support for accessing the device, | |
371 | additional drivers must be enabled in order to use the functionality | |
372 | of the device. | |
156f2528 | 373 | |
1d9f9f04 MB |
374 | config MFD_WM8400 |
375 | tristate "Support Wolfson Microelectronics WM8400" | |
b8380c1a | 376 | select MFD_CORE |
9c366452 | 377 | depends on I2C |
2b247d06 | 378 | select REGMAP_I2C |
1d9f9f04 MB |
379 | help |
380 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 381 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
382 | the device, additional drivers must be enabled in order to use |
383 | the functionality of the device. | |
384 | ||
b11062b9 | 385 | config MFD_WM831X |
e5b48684 MB |
386 | bool |
387 | depends on GENERIC_HARDIRQS | |
388 | ||
389 | config MFD_WM831X_I2C | |
390 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C" | |
b11062b9 | 391 | select MFD_CORE |
e5b48684 | 392 | select MFD_WM831X |
1df5981b | 393 | select REGMAP_I2C |
8d002bdc | 394 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 395 | help |
e5b48684 MB |
396 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
397 | when controlled using I2C. This driver provides common support | |
398 | for accessing the device, additional drivers must be enabled in | |
399 | order to use the functionality of the device. | |
b11062b9 | 400 | |
2aa13b9e MB |
401 | config MFD_WM831X_SPI |
402 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI" | |
403 | select MFD_CORE | |
404 | select MFD_WM831X | |
1df5981b | 405 | select REGMAP_SPI |
2aa13b9e MB |
406 | depends on SPI_MASTER && GENERIC_HARDIRQS |
407 | help | |
408 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs | |
409 | when controlled using SPI. This driver provides common support | |
410 | for accessing the device, additional drivers must be enabled in | |
411 | order to use the functionality of the device. | |
412 | ||
89b4012b | 413 | config MFD_WM8350 |
ecf926bc | 414 | bool |
8d002bdc | 415 | depends on GENERIC_HARDIRQS |
89b4012b MB |
416 | |
417 | config MFD_WM8350_CONFIG_MODE_0 | |
418 | bool | |
419 | depends on MFD_WM8350 | |
420 | ||
421 | config MFD_WM8350_CONFIG_MODE_1 | |
422 | bool | |
423 | depends on MFD_WM8350 | |
424 | ||
425 | config MFD_WM8350_CONFIG_MODE_2 | |
426 | bool | |
427 | depends on MFD_WM8350 | |
428 | ||
429 | config MFD_WM8350_CONFIG_MODE_3 | |
430 | bool | |
431 | depends on MFD_WM8350 | |
432 | ||
ca23f8c1 MB |
433 | config MFD_WM8351_CONFIG_MODE_0 |
434 | bool | |
435 | depends on MFD_WM8350 | |
436 | ||
437 | config MFD_WM8351_CONFIG_MODE_1 | |
438 | bool | |
439 | depends on MFD_WM8350 | |
440 | ||
441 | config MFD_WM8351_CONFIG_MODE_2 | |
442 | bool | |
443 | depends on MFD_WM8350 | |
444 | ||
445 | config MFD_WM8351_CONFIG_MODE_3 | |
446 | bool | |
447 | depends on MFD_WM8350 | |
448 | ||
96920630 MB |
449 | config MFD_WM8352_CONFIG_MODE_0 |
450 | bool | |
451 | depends on MFD_WM8350 | |
452 | ||
453 | config MFD_WM8352_CONFIG_MODE_1 | |
454 | bool | |
455 | depends on MFD_WM8350 | |
456 | ||
457 | config MFD_WM8352_CONFIG_MODE_2 | |
458 | bool | |
459 | depends on MFD_WM8350 | |
460 | ||
461 | config MFD_WM8352_CONFIG_MODE_3 | |
462 | bool | |
463 | depends on MFD_WM8350 | |
464 | ||
c661a0b9 | 465 | config MFD_WM8350_I2C |
ecf926bc | 466 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 467 | select MFD_WM8350 |
8d002bdc | 468 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
469 | help |
470 | The WM8350 is an integrated audio and power management | |
471 | subsystem with watchdog and RTC functionality for embedded | |
472 | systems. This option enables core support for the WM8350 with | |
473 | I2C as the control interface. Additional options must be | |
474 | selected to enable support for the functionality of the chip. | |
475 | ||
9e501086 | 476 | config MFD_WM8994 |
c9fbf7e0 | 477 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 478 | select MFD_CORE |
d6c645fc | 479 | select REGMAP_I2C |
c9fbf7e0 | 480 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
481 | help |
482 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
483 | smartphone applicatiosn. As well as audio functionality it | |
484 | has on board GPIO and regulator functionality which is | |
485 | supported via the relevant subsystems. This driver provides | |
486 | core support for the WM8994, in order to use the actual | |
487 | functionaltiy of the device other drivers must be enabled. | |
488 | ||
f52046b1 BR |
489 | config MFD_PCF50633 |
490 | tristate "Support for NXP PCF50633" | |
491 | depends on I2C | |
6e3ad118 | 492 | select REGMAP_I2C |
f52046b1 BR |
493 | help |
494 | Say yes here if you have NXP PCF50633 chip on your board. | |
495 | This core driver provides register access and IRQ handling | |
496 | facilities, and registers devices for the various functions | |
497 | so that function-specific drivers can bind to them. | |
498 | ||
1305134e AL |
499 | config PCF50633_ADC |
500 | tristate "Support for NXP PCF50633 ADC" | |
501 | depends on MFD_PCF50633 | |
502 | help | |
503 | Say yes here if you want to include support for ADC in the | |
504 | NXP PCF50633 chip. | |
505 | ||
506 | config PCF50633_GPIO | |
507 | tristate "Support for NXP PCF50633 GPIO" | |
508 | depends on MFD_PCF50633 | |
509 | help | |
510 | Say yes here if you want to include support GPIO for pins on | |
511 | the PCF50633 chip. | |
512 | ||
8238addc | 513 | config MFD_MC13783 |
8e005935 UKK |
514 | tristate |
515 | ||
516 | config MFD_MC13XXX | |
517 | tristate "Support Freescale MC13783 and MC13892" | |
8238addc SH |
518 | depends on SPI_MASTER |
519 | select MFD_CORE | |
8e005935 | 520 | select MFD_MC13783 |
8238addc | 521 | help |
8e005935 UKK |
522 | Support for the Freescale (Atlas) PMIC and audio CODECs |
523 | MC13783 and MC13892. | |
8238addc SH |
524 | This driver provides common support for accessing the device, |
525 | additional drivers must be enabled in order to use the | |
526 | functionality of the device. | |
527 | ||
fa661258 MW |
528 | config ABX500_CORE |
529 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" | |
47c16975 | 530 | default y if ARCH_U300 || ARCH_U8500 |
fa661258 MW |
531 | help |
532 | Say yes here if you have the ABX500 Mixed Signal IC family | |
533 | chips. This core driver expose register access functions. | |
534 | Functionality specific drivers using these functions can | |
535 | remain unchanged when IC changes. Binding of the functions to | |
536 | actual register access is done by the IC core driver. | |
537 | ||
14fa5691 | 538 | config AB3100_CORE |
2071db48 | 539 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
fa661258 | 540 | depends on I2C=y && ABX500_CORE |
8c96aefb | 541 | select MFD_CORE |
14fa5691 LW |
542 | default y if ARCH_U300 |
543 | help | |
544 | Select this to enable the AB3100 Mixed Signal IC core | |
545 | functionality. This connects to a AB3100 on the I2C bus | |
546 | and expose a number of symbols needed for dependent devices | |
547 | to read and write registers and subscribe to events from | |
548 | this multi-functional IC. This is needed to use other features | |
549 | of the AB3100 such as battery-backed RTC, charging control, | |
550 | LEDs, vibrator, system power and temperature, power management | |
551 | and ALSA sound. | |
552 | ||
12992dd8 LW |
553 | config AB3100_OTP |
554 | tristate "ST-Ericsson AB3100 OTP functions" | |
555 | depends on AB3100_CORE | |
556 | default y if AB3100_CORE | |
557 | help | |
558 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
559 | programmable memory) support. This exposes a sysfs file to read | |
560 | out OTP values. | |
561 | ||
13a09f93 DR |
562 | config EZX_PCAP |
563 | bool "PCAP Support" | |
564 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
565 | help | |
566 | This enables the PCAP ASIC present on EZX Phones. This is | |
567 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
568 | ||
3d5e2cab MW |
569 | config AB5500_CORE |
570 | bool "ST-Ericsson AB5500 Mixed Signal Power Management chip" | |
571 | depends on ABX500_CORE && MFD_DB5500_PRCMU | |
572 | select MFD_CORE | |
573 | help | |
574 | Select this option to enable access to AB5500 power management | |
575 | chip. This connects to the db5500 chip via the I2C bus via PRCMU. | |
576 | This chip embeds various other multimedia funtionalities as well. | |
577 | ||
94be70d4 LW |
578 | config AB5500_DEBUG |
579 | bool "Enable debug info via debugfs" | |
580 | depends on AB5500_CORE && DEBUG_FS | |
581 | default y if DEBUG_FS | |
582 | help | |
583 | Select this option if you want debug information from the AB5500 | |
584 | using the debug filesystem, debugfs. | |
585 | ||
62579266 RV |
586 | config AB8500_CORE |
587 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" | |
6680d940 | 588 | depends on GENERIC_HARDIRQS && ABX500_CORE |
62579266 | 589 | select MFD_CORE |
0c41839e | 590 | help |
62579266 | 591 | Select this option to enable access to AB8500 power management |
6680d940 SI |
592 | chip. This connects to U8500 either on the SSP/SPI bus (deprecated |
593 | since hardware version v1.0) or the I2C bus via PRCMU. It also adds | |
594 | the irq_chip parts for handling the Mixed Signal chip events. | |
0c41839e SK |
595 | This chip embeds various other multimedia funtionalities as well. |
596 | ||
39368eda MW |
597 | config AB8500_I2C_CORE |
598 | bool "AB8500 register access via PRCMU I2C" | |
650c2a21 | 599 | depends on AB8500_CORE && MFD_DB8500_PRCMU |
39368eda MW |
600 | default y |
601 | help | |
602 | This enables register access to the AB8500 chip via PRCMU I2C. | |
603 | The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware | |
604 | the I2C bus is connected to the Power Reset | |
605 | and Mangagement Unit, PRCMU. | |
606 | ||
5814fc35 MW |
607 | config AB8500_DEBUG |
608 | bool "Enable debug info via debugfs" | |
609 | depends on AB8500_CORE && DEBUG_FS | |
610 | default y if DEBUG_FS | |
611 | help | |
612 | Select this option if you want debug information using the debug | |
613 | filesystem, debugfs. | |
dae2db30 AM |
614 | |
615 | config AB8500_GPADC | |
616 | bool "AB8500 GPADC driver" | |
617 | depends on AB8500_CORE && REGULATOR_AB8500 | |
618 | default y | |
619 | help | |
620 | AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage | |
5814fc35 | 621 | |
650c2a21 LW |
622 | config MFD_DB8500_PRCMU |
623 | bool "ST-Ericsson DB8500 Power Reset Control Management Unit" | |
624 | depends on UX500_SOC_DB8500 | |
625 | select MFD_CORE | |
626 | help | |
627 | Select this option to enable support for the DB8500 Power Reset | |
628 | and Control Management Unit. This is basically an autonomous | |
629 | system controller running an XP70 microprocessor, which is accessed | |
630 | through a register map. | |
631 | ||
8317797c LW |
632 | config MFD_DB5500_PRCMU |
633 | bool "ST-Ericsson DB5500 Power Reset Control Management Unit" | |
634 | depends on UX500_SOC_DB5500 | |
635 | select MFD_CORE | |
636 | help | |
637 | Select this option to enable support for the DB5500 Power Reset | |
638 | and Control Management Unit. This is basically an autonomous | |
639 | system controller running an XP70 microprocessor, which is accessed | |
640 | through a register map. | |
641 | ||
f71e1afd AS |
642 | config MFD_CS5535 |
643 | tristate "Support for CS5535 and CS5536 southbridge core functions" | |
644 | select MFD_CORE | |
15b7cf14 | 645 | depends on PCI && X86 |
f71e1afd AS |
646 | ---help--- |
647 | This is the core driver for CS5535/CS5536 MFD functions. This is | |
648 | necessary for using the board's GPIO and MFGPT functionality. | |
649 | ||
8edbede9 RR |
650 | config MFD_TIMBERDALE |
651 | tristate "Support for the Timberdale FPGA" | |
652 | select MFD_CORE | |
546e29b6 | 653 | depends on PCI && GPIOLIB |
8edbede9 RR |
654 | ---help--- |
655 | This is the core driver for the timberdale FPGA. This device is a | |
656 | multifunction device which exposes numerous platform devices. | |
657 | ||
658 | The timberdale FPGA can be found on the Intel Atom development board | |
659 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
660 | |
661 | config LPC_SCH | |
662 | tristate "Intel SCH LPC" | |
663 | depends on PCI | |
664 | select MFD_CORE | |
665 | help | |
666 | LPC bridge function of the Intel SCH provides support for | |
667 | System Management Bus and General Purpose I/O. | |
668 | ||
e090d506 FF |
669 | config MFD_RDC321X |
670 | tristate "Support for RDC-R321x southbridge" | |
671 | select MFD_CORE | |
672 | depends on PCI | |
673 | help | |
674 | Say yes here if you want to have support for the RDC R-321x SoC | |
675 | southbridge which provides access to GPIOs and Watchdog using the | |
676 | southbridge PCI device configuration space. | |
677 | ||
bd358132 IS |
678 | config MFD_JANZ_CMODIO |
679 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
680 | select MFD_CORE | |
681 | depends on PCI | |
682 | help | |
683 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
684 | carrier board. This device is a PCI to MODULbus bridge which may | |
685 | host many different types of MODULbus daughterboards, including | |
686 | CAN and GPIO controllers. | |
687 | ||
91f4debf | 688 | config MFD_JZ4740_ADC |
914e6d4e | 689 | bool "Support for the JZ4740 SoC ADC core" |
91f4debf | 690 | select MFD_CORE |
914e6d4e | 691 | select GENERIC_IRQ_CHIP |
91f4debf LPC |
692 | depends on MACH_JZ4740 |
693 | help | |
694 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. | |
695 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. | |
696 | ||
375fc77b DD |
697 | config MFD_VX855 |
698 | tristate "Support for VIA VX855/VX875 integrated south bridge" | |
699 | depends on PCI | |
700 | select MFD_CORE | |
701 | help | |
702 | Say yes here to enable support for various functions of the | |
703 | VIA VX855/VX875 south bridge. You will need to enable the vx855_spi | |
704 | and/or vx855_gpio drivers for this to do anything useful. | |
705 | ||
383268a8 | 706 | config MFD_WL1273_CORE |
94fd5b74 | 707 | tristate "Support for TI WL1273 FM radio." |
383268a8 MA |
708 | depends on I2C |
709 | select MFD_CORE | |
710 | default n | |
711 | help | |
712 | This is the core driver for the TI WL1273 FM radio. This MFD | |
713 | driver connects the radio-wl1273 V4L2 module and the wl1273 | |
714 | audio codec. | |
715 | ||
17cdd29d KM |
716 | config MFD_OMAP_USB_HOST |
717 | bool "Support OMAP USBHS core driver" | |
718 | depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 | |
719 | default y | |
720 | help | |
721 | This is the core driver for the OAMP EHCI and OHCI drivers. | |
722 | This MFD driver does the required setup functionalities for | |
723 | OMAP USB Host drivers. | |
724 | ||
cbdb53e1 AD |
725 | config MFD_PM8XXX |
726 | tristate | |
727 | ||
728 | config MFD_PM8921_CORE | |
729 | tristate "Qualcomm PM8921 PMIC chip" | |
730 | depends on MSM_SSBI | |
731 | select MFD_CORE | |
732 | select MFD_PM8XXX | |
733 | help | |
734 | If you say yes to this option, support will be included for the | |
735 | built-in PM8921 PMIC chip. | |
736 | ||
737 | This is required if your board has a PM8921 and uses its features, | |
738 | such as: MPPs, GPIOs, regulators, interrupts, and PWM. | |
739 | ||
740 | Say M here if you want to include support for PM8921 chip as a module. | |
741 | This will build a module called "pm8921-core". | |
742 | ||
c013f0a5 AD |
743 | config MFD_PM8XXX_IRQ |
744 | bool "Support for Qualcomm PM8xxx IRQ features" | |
745 | depends on MFD_PM8XXX | |
746 | default y if MFD_PM8XXX | |
747 | help | |
748 | This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. | |
749 | ||
750 | This is required to use certain other PM 8xxx features, such as GPIO | |
751 | and MPP. | |
752 | ||
8509e142 AL |
753 | config TPS65911_COMPARATOR |
754 | tristate | |
755 | ||
09d6292b JP |
756 | config MFD_AAT2870_CORE |
757 | bool "Support for the AnalogicTech AAT2870" | |
758 | select MFD_CORE | |
759 | depends on I2C=y && GPIOLIB | |
760 | help | |
761 | If you say yes here you get support for the AAT2870. | |
762 | This driver provides common support for accessing the device, | |
763 | additional drivers must be enabled in order to use the | |
764 | functionality of the device. | |
765 | ||
1f5a371c MW |
766 | config MFD_INTEL_MSIC |
767 | bool "Support for Intel MSIC" | |
768 | depends on INTEL_SCU_IPC | |
769 | select MFD_CORE | |
770 | help | |
771 | Select this option to enable access to Intel MSIC (Avatele | |
772 | Passage) chip. This chip embeds audio, battery, GPIO, etc. | |
773 | devices used in Intel Medfield platforms. | |
774 | ||
8a0a8e8e AB |
775 | endmenu |
776 | endif | |
b6d6454f | 777 | |
a4e137ab | 778 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 779 | depends on ARCH_SA1100 |
a4e137ab RK |
780 | |
781 | config MCP | |
782 | tristate | |
783 | ||
5e742ad6 RK |
784 | # Interface drivers |
785 | config MCP_SA11X0 | |
786 | tristate "Support SA11x0 MCP interface" | |
787 | depends on ARCH_SA1100 | |
788 | select MCP | |
789 | ||
05c45ca9 RK |
790 | # Chip drivers |
791 | config MCP_UCB1200 | |
792 | tristate "Support for UCB1200 / UCB1300" | |
793 | depends on MCP | |
794 | ||
acb45439 RK |
795 | config MCP_UCB1200_TS |
796 | tristate "Touchscreen interface support" | |
797 | depends on MCP_UCB1200 && INPUT | |
798 | ||
a4e137ab | 799 | endmenu |