]>
Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
8a0a8e8e AB |
5 | if HAS_IOMEM |
6 | menu "Multifunction device drivers" | |
b6d6454f | 7 | |
aa613de6 DES |
8 | config MFD_CORE |
9 | tristate | |
10 | default n | |
11 | ||
2cc50bee HZ |
12 | config MFD_88PM860X |
13 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 14 | depends on I2C=y && GENERIC_HARDIRQS |
b46a36c0 | 15 | select REGMAP_I2C |
2cc50bee HZ |
16 | select MFD_CORE |
17 | help | |
18 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
19 | This includes the I2C driver and the core APIs _only_, you have to | |
20 | select individual components like voltage regulators, RTC and | |
21 | battery-charger under the corresponding menus. | |
22 | ||
b6d6454f BD |
23 | config MFD_SM501 |
24 | tristate "Support for Silicon Motion SM501" | |
25 | ---help--- | |
26 | This is the core driver for the Silicon Motion SM501 multimedia | |
27 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
28 | provide numerous interfaces including USB host controller, USB gadget, |
29 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
30 | interface. The device may be connected by PCI or local bus with |
31 | varying functions enabled. | |
32 | ||
f61be273 BD |
33 | config MFD_SM501_GPIO |
34 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 35 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
36 | ---help--- |
37 | This option uses the gpio library layer to export the 64 GPIO | |
38 | lines on the SM501. The platform data is used to supply the | |
39 | base number for the first GPIO line to register. | |
40 | ||
fa9ff4b1 SO |
41 | config MFD_ASIC3 |
42 | bool "Support for Compaq ASIC3" | |
2eedd604 | 43 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 44 | select MFD_CORE |
fa9ff4b1 SO |
45 | ---help--- |
46 | This driver supports the ASIC3 multifunction chip found on many | |
47 | PDAs (mainly iPAQ and HTC based ones) | |
48 | ||
ca26308c MA |
49 | config MFD_DAVINCI_VOICECODEC |
50 | tristate | |
51 | select MFD_CORE | |
52 | ||
0931a4c6 DB |
53 | config MFD_DM355EVM_MSP |
54 | bool "DaVinci DM355 EVM microcontroller" | |
1819ebcf | 55 | depends on I2C=y && MACH_DAVINCI_DM355_EVM |
0931a4c6 DB |
56 | help |
57 | This driver supports the MSP430 microcontroller used on these | |
58 | boards. MSP430 firmware manages resets and power sequencing, | |
59 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
60 | ||
03df0f62 CC |
61 | config MFD_TI_SSP |
62 | tristate "TI Sequencer Serial Port support" | |
63 | depends on ARCH_DAVINCI_TNETV107X | |
64 | select MFD_CORE | |
65 | ---help--- | |
66 | Say Y here if you want support for the Sequencer Serial Port | |
67 | in a Texas Instruments TNETV107X SoC. | |
68 | ||
69 | To compile this driver as a module, choose M here: the | |
70 | module will be called ti-ssp. | |
71 | ||
a1635b8f PZ |
72 | config HTC_EGPIO |
73 | bool "HTC EGPIO support" | |
7444a72e | 74 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
75 | help |
76 | This driver supports the CPLD egpio chip present on | |
77 | several HTC phones. It provides basic support for input | |
78 | pins, output pins, and irqs. | |
79 | ||
5dc3339a PZ |
80 | config HTC_PASIC3 |
81 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 82 | select MFD_CORE |
5dc3339a PZ |
83 | help |
84 | This core driver provides register access for the LED/DS1WM | |
85 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
86 | HTC Magician devices, respectively. Actual functionality is | |
87 | handled by the leds-pasic3 and ds1wm drivers. | |
88 | ||
6048a3dd CM |
89 | config HTC_I2CPLD |
90 | bool "HTC I2C PLD chip support" | |
bef3e20c | 91 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
92 | help |
93 | If you say yes here you get support for the supposed CPLD | |
94 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
95 | This device provides input and output GPIOs through an I2C | |
96 | interface to one or more sub-chips. | |
97 | ||
d9105c2b MV |
98 | config UCB1400_CORE |
99 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 100 | depends on AC97_BUS |
5a49a540 | 101 | depends on GPIOLIB |
d9105c2b MV |
102 | help |
103 | This enables support for the Philips UCB1400 core functions. | |
104 | The UCB1400 is an AC97 audio codec. | |
105 | ||
106 | To compile this driver as a module, choose M here: the | |
107 | module will be called ucb1400_core. | |
108 | ||
16c5c023 JH |
109 | config MFD_LM3533 |
110 | tristate "LM3533 Lighting Power chip" | |
111 | depends on I2C | |
112 | select MFD_CORE | |
113 | select REGMAP_I2C | |
114 | help | |
115 | Say yes here to enable support for National Semiconductor / TI | |
116 | LM3533 Lighting Power chips. | |
117 | ||
118 | This driver provides common support for accessing the device; | |
119 | additional drivers must be enabled in order to use the LED, | |
120 | backlight or ambient-light-sensor functionality of the device. | |
121 | ||
798a8eee LW |
122 | config TPS6105X |
123 | tristate "TPS61050/61052 Boost Converters" | |
124 | depends on I2C | |
2edd3b69 | 125 | select REGULATOR |
fc498fa2 | 126 | select MFD_CORE |
2edd3b69 | 127 | select REGULATOR_FIXED_VOLTAGE |
798a8eee LW |
128 | help |
129 | This option enables a driver for the TP61050/TPS61052 | |
130 | high-power "white LED driver". This boost converter is | |
131 | sometimes used for other things than white LEDs, and | |
132 | also contains a GPIO pin. | |
133 | ||
87c13493 DB |
134 | config TPS65010 |
135 | tristate "TPS6501x Power Management chips" | |
136 | depends on I2C && GPIOLIB | |
137 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
138 | help | |
139 | If you say yes here you get support for the TPS6501x series of | |
140 | Power Management chips. These include voltage regulators, | |
141 | lithium ion/polymer battery charging, and other features that | |
142 | are often used in portable devices like cell phones and cameras. | |
143 | ||
144 | This driver can also be built as a module. If so, the module | |
145 | will be called tps65010. | |
146 | ||
31dd6a26 TF |
147 | config TPS6507X |
148 | tristate "TPS6507x Power Management / Touch Screen chips" | |
149 | select MFD_CORE | |
150 | depends on I2C | |
151 | help | |
152 | If you say yes here you get support for the TPS6507x series of | |
153 | Power Management / Touch Screen chips. These include voltage | |
154 | regulators, lithium ion/polymer battery charging, touch screen | |
155 | and other features that are often used in portable devices. | |
156 | This driver can also be built as a module. If so, the module | |
157 | will be called tps6507x. | |
158 | ||
d48f411c AC |
159 | config MFD_TPS65217 |
160 | tristate "TPS65217 Power Management / White LED chips" | |
161 | depends on I2C | |
162 | select MFD_CORE | |
163 | select REGMAP_I2C | |
164 | help | |
165 | If you say yes here you get support for the TPS65217 series of | |
166 | Power Management / White LED chips. | |
167 | These include voltage regulators, lithium ion/polymer battery | |
168 | charger, wled and other features that are often used in portable | |
169 | devices. | |
170 | ||
171 | This driver can also be built as a module. If so, the module | |
172 | will be called tps65217. | |
173 | ||
37df003c AL |
174 | config MFD_TPS6586X |
175 | bool "TPS6586x Power Management chips" | |
176 | depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS | |
177 | select MFD_CORE | |
178 | help | |
179 | If you say yes here you get support for the TPS6586X series of | |
180 | Power Management chips. | |
181 | This driver provides common support for accessing the device, | |
182 | additional drivers must be enabled in order to use the | |
183 | functionality of the device. | |
184 | ||
185 | This driver can also be built as a module. If so, the module | |
186 | will be called tps6586x. | |
187 | ||
54f323b1 LW |
188 | config MFD_TPS65910 |
189 | bool "TPS65910 Power Management chip" | |
190 | depends on I2C=y && GPIOLIB | |
191 | select MFD_CORE | |
dc9913a0 | 192 | select REGMAP_I2C |
21f7541d | 193 | select IRQ_DOMAIN |
54f323b1 LW |
194 | help |
195 | if you say yes here you get support for the TPS65910 series of | |
196 | Power Management chips. | |
197 | ||
36e52873 | 198 | config MFD_TPS65912 |
5608801b | 199 | bool |
36e52873 MO |
200 | depends on GPIOLIB |
201 | ||
202 | config MFD_TPS65912_I2C | |
231dd9c8 | 203 | bool "TPS65912 Power Management chip with I2C" |
36e52873 MO |
204 | select MFD_CORE |
205 | select MFD_TPS65912 | |
206 | depends on I2C=y && GPIOLIB | |
207 | help | |
208 | If you say yes here you get support for the TPS65912 series of | |
209 | PM chips with I2C interface. | |
210 | ||
211 | config MFD_TPS65912_SPI | |
212 | bool "TPS65912 Power Management chip with SPI" | |
213 | select MFD_CORE | |
214 | select MFD_TPS65912 | |
215 | depends on SPI_MASTER && GPIOLIB | |
216 | help | |
217 | If you say yes here you get support for the TPS65912 series of | |
218 | PM chips with SPI interface. | |
219 | ||
88e75cc3 DB |
220 | config MENELAUS |
221 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 222 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
223 | help |
224 | If you say yes here you get support for the Texas Instruments | |
225 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 226 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
227 | and other features that are often used in portable devices like |
228 | cell phones and PDAs. | |
229 | ||
a603a7fa | 230 | config TWL4030_CORE |
e8deb28c | 231 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
6252547b | 232 | depends on I2C=y && GENERIC_HARDIRQS |
280ad7fd | 233 | select IRQ_DOMAIN |
a603a7fa | 234 | help |
e8deb28c | 235 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
236 | This core driver provides register access and IRQ handling |
237 | facilities, and registers devices for the various functions | |
238 | so that function-specific drivers can bind to them. | |
239 | ||
240 | These multi-function chips are found on many OMAP2 and OMAP3 | |
241 | boards, providing power management, RTC, GPIO, keypad, a | |
242 | high speed USB OTG transceiver, an audio codec (on most | |
243 | versions) and many other features. | |
244 | ||
f99c1d4f K |
245 | config TWL4030_MADC |
246 | tristate "Texas Instruments TWL4030 MADC" | |
247 | depends on TWL4030_CORE | |
248 | help | |
249 | This driver provides support for triton TWL4030-MADC. The | |
250 | driver supports both RT and SW conversion methods. | |
251 | ||
252 | This driver can be built as a module. If so it will be | |
253 | named twl4030-madc | |
254 | ||
ebf0bd36 AK |
255 | config TWL4030_POWER |
256 | bool "Support power resources on TWL4030 family chips" | |
257 | depends on TWL4030_CORE && ARM | |
258 | help | |
259 | Say yes here if you want to use the power resources on the | |
260 | TWL4030 family chips. Most of these resources are regulators, | |
261 | which have a separate driver; some are control signals, such | |
262 | as clock request handshaking. | |
263 | ||
264 | This driver uses board-specific data to initialize the resources | |
25985edc | 265 | and load scripts controlling which resources are switched off/on |
ebf0bd36 AK |
266 | or reset when a sleep, wakeup or warm reset event occurs. |
267 | ||
57fe7251 | 268 | config MFD_TWL4030_AUDIO |
0b83ddeb PU |
269 | bool |
270 | depends on TWL4030_CORE | |
271 | select MFD_CORE | |
272 | default n | |
273 | ||
31fc03df H |
274 | config TWL6030_PWM |
275 | tristate "TWL6030 PWM (Pulse Width Modulator) Support" | |
276 | depends on TWL4030_CORE | |
277 | select HAVE_PWM | |
278 | default n | |
279 | help | |
280 | Say yes here if you want support for TWL6030 PWM. | |
281 | This is used to control charging LED brightness. | |
282 | ||
f19b2823 | 283 | config TWL6040_CORE |
8eaeb939 PU |
284 | bool "Support for TWL6040 audio codec" |
285 | depends on I2C=y && GENERIC_HARDIRQS | |
f19b2823 | 286 | select MFD_CORE |
8eaeb939 | 287 | select REGMAP_I2C |
f19b2823 | 288 | default n |
8eaeb939 PU |
289 | help |
290 | Say yes here if you want support for Texas Instruments TWL6040 audio | |
291 | codec. | |
292 | This driver provides common support for accessing the device, | |
293 | additional drivers must be enabled in order to use the | |
294 | functionality of the device (audio, vibra). | |
f19b2823 | 295 | |
27e34995 RV |
296 | config MFD_STMPE |
297 | bool "Support STMicroelectronics STMPE" | |
e789995d | 298 | depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS |
27e34995 RV |
299 | select MFD_CORE |
300 | help | |
301 | Support for the STMPE family of I/O Expanders from | |
302 | STMicroelectronics. | |
303 | ||
304 | Currently supported devices are: | |
305 | ||
306 | STMPE811: GPIO, Touchscreen | |
307 | STMPE1601: GPIO, Keypad | |
308 | STMPE2401: GPIO, Keypad | |
309 | STMPE2403: GPIO, Keypad | |
310 | ||
311 | This driver provides common support for accessing the device, | |
312 | additional drivers must be enabled in order to use the functionality | |
313 | of the device. Currently available sub drivers are: | |
314 | ||
315 | GPIO: stmpe-gpio | |
316 | Keypad: stmpe-keypad | |
317 | Touchscreen: stmpe-ts | |
318 | ||
1a6e4b74 VK |
319 | menu "STMPE Interface Drivers" |
320 | depends on MFD_STMPE | |
321 | ||
322 | config STMPE_I2C | |
323 | bool "STMPE I2C Inteface" | |
eedea80f | 324 | depends on I2C=y |
1a6e4b74 VK |
325 | default y |
326 | help | |
327 | This is used to enable I2C interface of STMPE | |
e789995d VK |
328 | |
329 | config STMPE_SPI | |
330 | bool "STMPE SPI Inteface" | |
331 | depends on SPI_MASTER | |
332 | help | |
333 | This is used to enable SPI interface of STMPE | |
1a6e4b74 VK |
334 | endmenu |
335 | ||
f4e8afdc SI |
336 | config MFD_TC3589X |
337 | bool "Support Toshiba TC35892 and variants" | |
b4ecd326 RV |
338 | depends on I2C=y && GENERIC_HARDIRQS |
339 | select MFD_CORE | |
340 | help | |
f4e8afdc | 341 | Support for the Toshiba TC35892 and variants I/O Expander. |
b4ecd326 RV |
342 | |
343 | This driver provides common support for accessing the device, | |
344 | additional drivers must be enabled in order to use the | |
345 | functionality of the device. | |
346 | ||
1c2c30ac SO |
347 | config MFD_TMIO |
348 | bool | |
349 | default n | |
350 | ||
1f192015 IM |
351 | config MFD_T7L66XB |
352 | bool "Support Toshiba T7L66XB" | |
9ca68233 | 353 | depends on ARM && HAVE_CLK |
1f192015 | 354 | select MFD_CORE |
1c2c30ac | 355 | select MFD_TMIO |
1f192015 IM |
356 | help |
357 | Support for Toshiba Mobile IO Controller T7L66XB | |
358 | ||
cbdfb426 IM |
359 | config MFD_TC6387XB |
360 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 361 | depends on ARM && HAVE_CLK |
cbdfb426 | 362 | select MFD_CORE |
1c2c30ac | 363 | select MFD_TMIO |
cbdfb426 IM |
364 | help |
365 | Support for Toshiba Mobile IO Controller TC6387XB | |
366 | ||
d6315949 DES |
367 | config MFD_TC6393XB |
368 | bool "Support Toshiba TC6393XB" | |
e959da10 | 369 | depends on GPIOLIB && ARM && HAVE_CLK |
f024ff10 | 370 | select MFD_CORE |
1c2c30ac | 371 | select MFD_TMIO |
d6315949 DES |
372 | help |
373 | Support for Toshiba Mobile IO Controller TC6393XB | |
374 | ||
8e2eaabf SO |
375 | config PMIC_DA903X |
376 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
377 | depends on I2C=y | |
378 | help | |
379 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
380 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
381 | usually found on PXA processors-based platforms. This includes | |
382 | the I2C driver and the core APIs _only_, you have to select | |
383 | individual components like LCD backlight, voltage regulators, | |
384 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b | 385 | |
84c99db8 AJ |
386 | config PMIC_DA9052 |
387 | bool | |
388 | select MFD_CORE | |
389 | ||
cfe04478 AJ |
390 | config MFD_DA9052_SPI |
391 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI" | |
392 | select REGMAP_SPI | |
393 | select REGMAP_IRQ | |
394 | select PMIC_DA9052 | |
395 | depends on SPI_MASTER=y | |
396 | help | |
397 | Support for the Dialog Semiconductor DA9052 PMIC | |
398 | when controlled using SPI. This driver provides common support | |
399 | for accessing the device, additional drivers must be enabled in | |
400 | order to use the functionality of the device. | |
401 | ||
84c99db8 AJ |
402 | config MFD_DA9052_I2C |
403 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C" | |
404 | select REGMAP_I2C | |
405 | select REGMAP_IRQ | |
406 | select PMIC_DA9052 | |
407 | depends on I2C=y | |
408 | help | |
409 | Support for the Dialog Semiconductor DA9052 PMIC | |
410 | when controlled using I2C. This driver provides common support | |
411 | for accessing the device, additional drivers must be enabled in | |
412 | order to use the functionality of the device. | |
413 | ||
a5736e0b MH |
414 | config PMIC_ADP5520 |
415 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
416 | depends on I2C=y | |
417 | help | |
418 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
419 | Multifunction Power Management IC. This includes | |
420 | the I2C driver and the core APIs _only_, you have to select | |
421 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
422 | under the corresponding menus. | |
8e2eaabf | 423 | |
83871c00 CC |
424 | config MFD_MAX77693 |
425 | bool "Maxim Semiconductor MAX77693 PMIC Support" | |
426 | depends on I2C=y && GENERIC_HARDIRQS | |
427 | select MFD_CORE | |
428 | help | |
429 | Say yes here to support for Maxim Semiconductor MAX77693. | |
430 | This is a companion Power Management IC with Flash, Haptic, Charger, | |
431 | and MUIC(Micro USB Interface Controller) controls on chip. | |
432 | This driver provides common support for accessing the device; | |
433 | additional drivers must be enabled in order to use the functionality | |
434 | of the device. | |
435 | ||
d50f8f33 | 436 | config MFD_MAX8925 |
1f1cf8f9 | 437 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 438 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 439 | select MFD_CORE |
d50f8f33 HZ |
440 | help |
441 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
442 | a Power Management IC. This driver provies common support for | |
443 | accessing the device, additional drivers must be enabled in order | |
444 | to use the functionality of the device. | |
445 | ||
527e7e9a MH |
446 | config MFD_MAX8997 |
447 | bool "Maxim Semiconductor MAX8997/8966 PMIC Support" | |
448 | depends on I2C=y && GENERIC_HARDIRQS | |
449 | select MFD_CORE | |
450 | help | |
5a924d13 | 451 | Say yes here to support for Maxim Semiconductor MAX8997/8966. |
527e7e9a MH |
452 | This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, |
453 | MUIC controls on chip. | |
d7e8c01a | 454 | This driver provides common support for accessing the device; |
527e7e9a MH |
455 | additional drivers must be enabled in order to use the functionality |
456 | of the device. | |
457 | ||
156f2528 | 458 | config MFD_MAX8998 |
f8539ddc | 459 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
2c7e6f57 | 460 | depends on I2C=y && GENERIC_HARDIRQS |
156f2528 KP |
461 | select MFD_CORE |
462 | help | |
f8539ddc KP |
463 | Say yes here to support for Maxim Semiconductor MAX8998 and |
464 | National Semiconductor LP3974. This is a Power Management IC. | |
465 | This driver provies common support for accessing the device, | |
466 | additional drivers must be enabled in order to use the functionality | |
467 | of the device. | |
156f2528 | 468 | |
c3d4d697 SK |
469 | config MFD_S5M_CORE |
470 | bool "SAMSUNG S5M Series Support" | |
471 | depends on I2C=y && GENERIC_HARDIRQS | |
472 | select MFD_CORE | |
473 | select REGMAP_I2C | |
474 | help | |
475 | Support for the Samsung Electronics S5M MFD series. | |
476 | This driver provies common support for accessing the device, | |
477 | additional drivers must be enabled in order to use the functionality | |
478 | of the device | |
479 | ||
1d9f9f04 | 480 | config MFD_WM8400 |
eee0e4b4 | 481 | bool "Support Wolfson Microelectronics WM8400" |
b8380c1a | 482 | select MFD_CORE |
08b4c118 | 483 | depends on I2C=y |
2b247d06 | 484 | select REGMAP_I2C |
1d9f9f04 MB |
485 | help |
486 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 487 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
488 | the device, additional drivers must be enabled in order to use |
489 | the functionality of the device. | |
490 | ||
b11062b9 | 491 | config MFD_WM831X |
e5b48684 MB |
492 | bool |
493 | depends on GENERIC_HARDIRQS | |
494 | ||
495 | config MFD_WM831X_I2C | |
496 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C" | |
b11062b9 | 497 | select MFD_CORE |
e5b48684 | 498 | select MFD_WM831X |
1df5981b | 499 | select REGMAP_I2C |
cd99758b | 500 | select IRQ_DOMAIN |
8d002bdc | 501 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 502 | help |
e5b48684 MB |
503 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
504 | when controlled using I2C. This driver provides common support | |
505 | for accessing the device, additional drivers must be enabled in | |
506 | order to use the functionality of the device. | |
b11062b9 | 507 | |
2aa13b9e MB |
508 | config MFD_WM831X_SPI |
509 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI" | |
510 | select MFD_CORE | |
511 | select MFD_WM831X | |
1df5981b | 512 | select REGMAP_SPI |
cd99758b | 513 | select IRQ_DOMAIN |
2aa13b9e MB |
514 | depends on SPI_MASTER && GENERIC_HARDIRQS |
515 | help | |
516 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs | |
517 | when controlled using SPI. This driver provides common support | |
518 | for accessing the device, additional drivers must be enabled in | |
519 | order to use the functionality of the device. | |
520 | ||
89b4012b | 521 | config MFD_WM8350 |
ecf926bc | 522 | bool |
8d002bdc | 523 | depends on GENERIC_HARDIRQS |
89b4012b MB |
524 | |
525 | config MFD_WM8350_CONFIG_MODE_0 | |
526 | bool | |
527 | depends on MFD_WM8350 | |
528 | ||
529 | config MFD_WM8350_CONFIG_MODE_1 | |
530 | bool | |
531 | depends on MFD_WM8350 | |
532 | ||
533 | config MFD_WM8350_CONFIG_MODE_2 | |
534 | bool | |
535 | depends on MFD_WM8350 | |
536 | ||
537 | config MFD_WM8350_CONFIG_MODE_3 | |
538 | bool | |
539 | depends on MFD_WM8350 | |
540 | ||
ca23f8c1 MB |
541 | config MFD_WM8351_CONFIG_MODE_0 |
542 | bool | |
543 | depends on MFD_WM8350 | |
544 | ||
545 | config MFD_WM8351_CONFIG_MODE_1 | |
546 | bool | |
547 | depends on MFD_WM8350 | |
548 | ||
549 | config MFD_WM8351_CONFIG_MODE_2 | |
550 | bool | |
551 | depends on MFD_WM8350 | |
552 | ||
553 | config MFD_WM8351_CONFIG_MODE_3 | |
554 | bool | |
555 | depends on MFD_WM8350 | |
556 | ||
96920630 MB |
557 | config MFD_WM8352_CONFIG_MODE_0 |
558 | bool | |
559 | depends on MFD_WM8350 | |
560 | ||
561 | config MFD_WM8352_CONFIG_MODE_1 | |
562 | bool | |
563 | depends on MFD_WM8350 | |
564 | ||
565 | config MFD_WM8352_CONFIG_MODE_2 | |
566 | bool | |
567 | depends on MFD_WM8350 | |
568 | ||
569 | config MFD_WM8352_CONFIG_MODE_3 | |
570 | bool | |
571 | depends on MFD_WM8350 | |
572 | ||
c661a0b9 | 573 | config MFD_WM8350_I2C |
ecf926bc | 574 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 575 | select MFD_WM8350 |
8d002bdc | 576 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
577 | help |
578 | The WM8350 is an integrated audio and power management | |
579 | subsystem with watchdog and RTC functionality for embedded | |
580 | systems. This option enables core support for the WM8350 with | |
581 | I2C as the control interface. Additional options must be | |
582 | selected to enable support for the functionality of the chip. | |
583 | ||
9e501086 | 584 | config MFD_WM8994 |
c9fbf7e0 | 585 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 586 | select MFD_CORE |
d6c645fc | 587 | select REGMAP_I2C |
8ab30691 | 588 | select REGMAP_IRQ |
c9fbf7e0 | 589 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
590 | help |
591 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
592 | smartphone applicatiosn. As well as audio functionality it | |
593 | has on board GPIO and regulator functionality which is | |
594 | supported via the relevant subsystems. This driver provides | |
595 | core support for the WM8994, in order to use the actual | |
596 | functionaltiy of the device other drivers must be enabled. | |
597 | ||
f52046b1 BR |
598 | config MFD_PCF50633 |
599 | tristate "Support for NXP PCF50633" | |
600 | depends on I2C | |
6e3ad118 | 601 | select REGMAP_I2C |
f52046b1 BR |
602 | help |
603 | Say yes here if you have NXP PCF50633 chip on your board. | |
604 | This core driver provides register access and IRQ handling | |
605 | facilities, and registers devices for the various functions | |
606 | so that function-specific drivers can bind to them. | |
607 | ||
1305134e AL |
608 | config PCF50633_ADC |
609 | tristate "Support for NXP PCF50633 ADC" | |
610 | depends on MFD_PCF50633 | |
611 | help | |
612 | Say yes here if you want to include support for ADC in the | |
613 | NXP PCF50633 chip. | |
614 | ||
615 | config PCF50633_GPIO | |
616 | tristate "Support for NXP PCF50633 GPIO" | |
617 | depends on MFD_PCF50633 | |
618 | help | |
619 | Say yes here if you want to include support GPIO for pins on | |
620 | the PCF50633 chip. | |
621 | ||
8238addc | 622 | config MFD_MC13783 |
8e005935 UKK |
623 | tristate |
624 | ||
625 | config MFD_MC13XXX | |
626 | tristate "Support Freescale MC13783 and MC13892" | |
df3df646 | 627 | depends on SPI_MASTER || I2C |
8238addc | 628 | select MFD_CORE |
8e005935 | 629 | select MFD_MC13783 |
8238addc | 630 | help |
a0c7c1d4 MR |
631 | Enable support for the Freescale MC13783 and MC13892 PMICs. |
632 | This driver provides common support for accessing the device, | |
8238addc SH |
633 | additional drivers must be enabled in order to use the |
634 | functionality of the device. | |
635 | ||
a0c7c1d4 MR |
636 | if MFD_MC13XXX |
637 | ||
638 | config MFD_MC13XXX_SPI | |
639 | tristate "MC13xxx SPI interface" if SPI_MASTER | |
640 | default SPI_MASTER | |
641 | select REGMAP_SPI | |
642 | help | |
643 | Select this if your MC13xxx is connected via an SPI bus. | |
644 | ||
df3df646 MR |
645 | config MFD_MC13XXX_I2C |
646 | tristate "MC13xxx I2C interface" if I2C | |
647 | default I2C | |
648 | select REGMAP_I2C | |
649 | help | |
650 | Select this if your MC13xxx is connected via an I2C bus. | |
651 | ||
a0c7c1d4 MR |
652 | endif |
653 | ||
fa661258 MW |
654 | config ABX500_CORE |
655 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" | |
47c16975 | 656 | default y if ARCH_U300 || ARCH_U8500 |
fa661258 MW |
657 | help |
658 | Say yes here if you have the ABX500 Mixed Signal IC family | |
659 | chips. This core driver expose register access functions. | |
660 | Functionality specific drivers using these functions can | |
661 | remain unchanged when IC changes. Binding of the functions to | |
662 | actual register access is done by the IC core driver. | |
663 | ||
14fa5691 | 664 | config AB3100_CORE |
2071db48 | 665 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
fa661258 | 666 | depends on I2C=y && ABX500_CORE |
8c96aefb | 667 | select MFD_CORE |
14fa5691 LW |
668 | default y if ARCH_U300 |
669 | help | |
670 | Select this to enable the AB3100 Mixed Signal IC core | |
671 | functionality. This connects to a AB3100 on the I2C bus | |
672 | and expose a number of symbols needed for dependent devices | |
673 | to read and write registers and subscribe to events from | |
674 | this multi-functional IC. This is needed to use other features | |
675 | of the AB3100 such as battery-backed RTC, charging control, | |
676 | LEDs, vibrator, system power and temperature, power management | |
677 | and ALSA sound. | |
678 | ||
12992dd8 LW |
679 | config AB3100_OTP |
680 | tristate "ST-Ericsson AB3100 OTP functions" | |
681 | depends on AB3100_CORE | |
682 | default y if AB3100_CORE | |
683 | help | |
684 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
685 | programmable memory) support. This exposes a sysfs file to read | |
686 | out OTP values. | |
687 | ||
13a09f93 DR |
688 | config EZX_PCAP |
689 | bool "PCAP Support" | |
690 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
691 | help | |
692 | This enables the PCAP ASIC present on EZX Phones. This is | |
693 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
694 | ||
3d5e2cab MW |
695 | config AB5500_CORE |
696 | bool "ST-Ericsson AB5500 Mixed Signal Power Management chip" | |
697 | depends on ABX500_CORE && MFD_DB5500_PRCMU | |
698 | select MFD_CORE | |
699 | help | |
700 | Select this option to enable access to AB5500 power management | |
701 | chip. This connects to the db5500 chip via the I2C bus via PRCMU. | |
702 | This chip embeds various other multimedia funtionalities as well. | |
703 | ||
94be70d4 LW |
704 | config AB5500_DEBUG |
705 | bool "Enable debug info via debugfs" | |
706 | depends on AB5500_CORE && DEBUG_FS | |
707 | default y if DEBUG_FS | |
708 | help | |
709 | Select this option if you want debug information from the AB5500 | |
710 | using the debug filesystem, debugfs. | |
711 | ||
62579266 RV |
712 | config AB8500_CORE |
713 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" | |
6680d940 | 714 | depends on GENERIC_HARDIRQS && ABX500_CORE |
62579266 | 715 | select MFD_CORE |
0c41839e | 716 | help |
62579266 | 717 | Select this option to enable access to AB8500 power management |
6680d940 SI |
718 | chip. This connects to U8500 either on the SSP/SPI bus (deprecated |
719 | since hardware version v1.0) or the I2C bus via PRCMU. It also adds | |
720 | the irq_chip parts for handling the Mixed Signal chip events. | |
0c41839e SK |
721 | This chip embeds various other multimedia funtionalities as well. |
722 | ||
39368eda MW |
723 | config AB8500_I2C_CORE |
724 | bool "AB8500 register access via PRCMU I2C" | |
650c2a21 | 725 | depends on AB8500_CORE && MFD_DB8500_PRCMU |
39368eda MW |
726 | default y |
727 | help | |
728 | This enables register access to the AB8500 chip via PRCMU I2C. | |
729 | The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware | |
730 | the I2C bus is connected to the Power Reset | |
731 | and Mangagement Unit, PRCMU. | |
732 | ||
5814fc35 MW |
733 | config AB8500_DEBUG |
734 | bool "Enable debug info via debugfs" | |
735 | depends on AB8500_CORE && DEBUG_FS | |
736 | default y if DEBUG_FS | |
737 | help | |
738 | Select this option if you want debug information using the debug | |
739 | filesystem, debugfs. | |
dae2db30 AM |
740 | |
741 | config AB8500_GPADC | |
742 | bool "AB8500 GPADC driver" | |
743 | depends on AB8500_CORE && REGULATOR_AB8500 | |
744 | default y | |
745 | help | |
746 | AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage | |
5814fc35 | 747 | |
650c2a21 LW |
748 | config MFD_DB8500_PRCMU |
749 | bool "ST-Ericsson DB8500 Power Reset Control Management Unit" | |
750 | depends on UX500_SOC_DB8500 | |
751 | select MFD_CORE | |
752 | help | |
753 | Select this option to enable support for the DB8500 Power Reset | |
754 | and Control Management Unit. This is basically an autonomous | |
755 | system controller running an XP70 microprocessor, which is accessed | |
756 | through a register map. | |
757 | ||
8317797c LW |
758 | config MFD_DB5500_PRCMU |
759 | bool "ST-Ericsson DB5500 Power Reset Control Management Unit" | |
760 | depends on UX500_SOC_DB5500 | |
761 | select MFD_CORE | |
762 | help | |
763 | Select this option to enable support for the DB5500 Power Reset | |
764 | and Control Management Unit. This is basically an autonomous | |
765 | system controller running an XP70 microprocessor, which is accessed | |
766 | through a register map. | |
767 | ||
f71e1afd AS |
768 | config MFD_CS5535 |
769 | tristate "Support for CS5535 and CS5536 southbridge core functions" | |
770 | select MFD_CORE | |
15b7cf14 | 771 | depends on PCI && X86 |
f71e1afd AS |
772 | ---help--- |
773 | This is the core driver for CS5535/CS5536 MFD functions. This is | |
774 | necessary for using the board's GPIO and MFGPT functionality. | |
775 | ||
8edbede9 RR |
776 | config MFD_TIMBERDALE |
777 | tristate "Support for the Timberdale FPGA" | |
778 | select MFD_CORE | |
546e29b6 | 779 | depends on PCI && GPIOLIB |
8edbede9 RR |
780 | ---help--- |
781 | This is the core driver for the timberdale FPGA. This device is a | |
782 | multifunction device which exposes numerous platform devices. | |
783 | ||
784 | The timberdale FPGA can be found on the Intel Atom development board | |
785 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
786 | |
787 | config LPC_SCH | |
788 | tristate "Intel SCH LPC" | |
789 | depends on PCI | |
790 | select MFD_CORE | |
791 | help | |
792 | LPC bridge function of the Intel SCH provides support for | |
793 | System Management Bus and General Purpose I/O. | |
794 | ||
4630b130 AS |
795 | config LPC_ICH |
796 | tristate "Intel ICH LPC" | |
797 | depends on PCI | |
798 | select MFD_CORE | |
799 | help | |
800 | The LPC bridge function of the Intel ICH provides support for | |
801 | many functional units. This driver provides needed support for | |
887c8ec7 AS |
802 | other drivers to control these functions, currently GPIO and |
803 | watchdog. | |
4630b130 | 804 | |
e090d506 FF |
805 | config MFD_RDC321X |
806 | tristate "Support for RDC-R321x southbridge" | |
807 | select MFD_CORE | |
808 | depends on PCI | |
809 | help | |
810 | Say yes here if you want to have support for the RDC R-321x SoC | |
811 | southbridge which provides access to GPIOs and Watchdog using the | |
812 | southbridge PCI device configuration space. | |
813 | ||
bd358132 IS |
814 | config MFD_JANZ_CMODIO |
815 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
816 | select MFD_CORE | |
817 | depends on PCI | |
818 | help | |
819 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
820 | carrier board. This device is a PCI to MODULbus bridge which may | |
821 | host many different types of MODULbus daughterboards, including | |
822 | CAN and GPIO controllers. | |
823 | ||
91f4debf | 824 | config MFD_JZ4740_ADC |
914e6d4e | 825 | bool "Support for the JZ4740 SoC ADC core" |
91f4debf | 826 | select MFD_CORE |
914e6d4e | 827 | select GENERIC_IRQ_CHIP |
91f4debf LPC |
828 | depends on MACH_JZ4740 |
829 | help | |
830 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. | |
831 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. | |
832 | ||
375fc77b DD |
833 | config MFD_VX855 |
834 | tristate "Support for VIA VX855/VX875 integrated south bridge" | |
835 | depends on PCI | |
836 | select MFD_CORE | |
837 | help | |
838 | Say yes here to enable support for various functions of the | |
839 | VIA VX855/VX875 south bridge. You will need to enable the vx855_spi | |
840 | and/or vx855_gpio drivers for this to do anything useful. | |
841 | ||
383268a8 | 842 | config MFD_WL1273_CORE |
94fd5b74 | 843 | tristate "Support for TI WL1273 FM radio." |
383268a8 MA |
844 | depends on I2C |
845 | select MFD_CORE | |
846 | default n | |
847 | help | |
848 | This is the core driver for the TI WL1273 FM radio. This MFD | |
849 | driver connects the radio-wl1273 V4L2 module and the wl1273 | |
850 | audio codec. | |
851 | ||
17cdd29d KM |
852 | config MFD_OMAP_USB_HOST |
853 | bool "Support OMAP USBHS core driver" | |
854 | depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 | |
855 | default y | |
856 | help | |
857 | This is the core driver for the OAMP EHCI and OHCI drivers. | |
858 | This MFD driver does the required setup functionalities for | |
859 | OMAP USB Host drivers. | |
860 | ||
cbdb53e1 AD |
861 | config MFD_PM8XXX |
862 | tristate | |
863 | ||
864 | config MFD_PM8921_CORE | |
865 | tristate "Qualcomm PM8921 PMIC chip" | |
866 | depends on MSM_SSBI | |
867 | select MFD_CORE | |
868 | select MFD_PM8XXX | |
869 | help | |
870 | If you say yes to this option, support will be included for the | |
871 | built-in PM8921 PMIC chip. | |
872 | ||
873 | This is required if your board has a PM8921 and uses its features, | |
874 | such as: MPPs, GPIOs, regulators, interrupts, and PWM. | |
875 | ||
876 | Say M here if you want to include support for PM8921 chip as a module. | |
877 | This will build a module called "pm8921-core". | |
878 | ||
c013f0a5 AD |
879 | config MFD_PM8XXX_IRQ |
880 | bool "Support for Qualcomm PM8xxx IRQ features" | |
881 | depends on MFD_PM8XXX | |
882 | default y if MFD_PM8XXX | |
883 | help | |
884 | This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. | |
885 | ||
886 | This is required to use certain other PM 8xxx features, such as GPIO | |
887 | and MPP. | |
888 | ||
8509e142 AL |
889 | config TPS65911_COMPARATOR |
890 | tristate | |
891 | ||
3c33be06 VB |
892 | config MFD_TPS65090 |
893 | bool "TPS65090 Power Management chips" | |
894 | depends on I2C=y && GENERIC_HARDIRQS | |
895 | select MFD_CORE | |
896 | select REGMAP_I2C | |
897 | help | |
898 | If you say yes here you get support for the TPS65090 series of | |
899 | Power Management chips. | |
900 | This driver provides common support for accessing the device, | |
901 | additional drivers must be enabled in order to use the | |
902 | functionality of the device. | |
903 | ||
09d6292b JP |
904 | config MFD_AAT2870_CORE |
905 | bool "Support for the AnalogicTech AAT2870" | |
906 | select MFD_CORE | |
907 | depends on I2C=y && GPIOLIB | |
908 | help | |
909 | If you say yes here you get support for the AAT2870. | |
910 | This driver provides common support for accessing the device, | |
911 | additional drivers must be enabled in order to use the | |
912 | functionality of the device. | |
913 | ||
1f5a371c MW |
914 | config MFD_INTEL_MSIC |
915 | bool "Support for Intel MSIC" | |
916 | depends on INTEL_SCU_IPC | |
917 | select MFD_CORE | |
918 | help | |
919 | Select this option to enable access to Intel MSIC (Avatele | |
920 | Passage) chip. This chip embeds audio, battery, GPIO, etc. | |
921 | devices used in Intel Medfield platforms. | |
922 | ||
1b1247dd LD |
923 | config MFD_RC5T583 |
924 | bool "Ricoh RC5T583 Power Management system device" | |
5364d0b8 | 925 | depends on I2C=y && GENERIC_HARDIRQS |
1b1247dd LD |
926 | select MFD_CORE |
927 | select REGMAP_I2C | |
928 | help | |
929 | Select this option to get support for the RICOH583 Power | |
930 | Management system device. | |
931 | This driver provides common support for accessing the device | |
932 | through i2c interface. The device supports multiple sub-devices | |
933 | like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. | |
934 | Additional drivers must be enabled in order to use the | |
935 | different functionality of the device. | |
936 | ||
35bdd290 AR |
937 | config MFD_STA2X11 |
938 | bool "STA2X11 multi function device support" | |
939 | depends on STA2X11 | |
940 | select MFD_CORE | |
941 | ||
75060a1d YCLP |
942 | config MFD_ANATOP |
943 | bool "Support for Freescale i.MX on-chip ANATOP controller" | |
944 | depends on SOC_IMX6Q | |
945 | help | |
946 | Select this option to enable Freescale i.MX on-chip ANATOP | |
947 | MFD controller. This controller embeds regulator and | |
948 | thermal devices for Freescale i.MX platforms. | |
949 | ||
8a0a8e8e AB |
950 | endmenu |
951 | endif | |
b6d6454f | 952 | |
a4e137ab | 953 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 954 | depends on ARCH_SA1100 |
a4e137ab RK |
955 | |
956 | config MCP | |
957 | tristate | |
958 | ||
5e742ad6 RK |
959 | # Interface drivers |
960 | config MCP_SA11X0 | |
961 | tristate "Support SA11x0 MCP interface" | |
962 | depends on ARCH_SA1100 | |
963 | select MCP | |
964 | ||
05c45ca9 RK |
965 | # Chip drivers |
966 | config MCP_UCB1200 | |
a3364409 RK |
967 | bool "Support for UCB1200 / UCB1300" |
968 | depends on MCP_SA11X0 | |
969 | select MCP | |
05c45ca9 | 970 | |
acb45439 RK |
971 | config MCP_UCB1200_TS |
972 | tristate "Touchscreen interface support" | |
973 | depends on MCP_UCB1200 && INPUT | |
974 | ||
a4e137ab | 975 | endmenu |