]>
Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
8a0a8e8e AB |
5 | if HAS_IOMEM |
6 | menu "Multifunction device drivers" | |
b6d6454f | 7 | |
aa613de6 DB |
8 | config MFD_CORE |
9 | tristate | |
10 | default n | |
11 | ||
2cc50bee HZ |
12 | config MFD_88PM860X |
13 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 14 | depends on I2C=y && GENERIC_HARDIRQS |
b46a36c0 | 15 | select REGMAP_I2C |
2cc50bee HZ |
16 | select MFD_CORE |
17 | help | |
18 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
19 | This includes the I2C driver and the core APIs _only_, you have to | |
20 | select individual components like voltage regulators, RTC and | |
21 | battery-charger under the corresponding menus. | |
22 | ||
b6d6454f BD |
23 | config MFD_SM501 |
24 | tristate "Support for Silicon Motion SM501" | |
25 | ---help--- | |
26 | This is the core driver for the Silicon Motion SM501 multimedia | |
27 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
28 | provide numerous interfaces including USB host controller, USB gadget, |
29 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
30 | interface. The device may be connected by PCI or local bus with |
31 | varying functions enabled. | |
32 | ||
f61be273 BD |
33 | config MFD_SM501_GPIO |
34 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 35 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
36 | ---help--- |
37 | This option uses the gpio library layer to export the 64 GPIO | |
38 | lines on the SM501. The platform data is used to supply the | |
39 | base number for the first GPIO line to register. | |
40 | ||
fa9ff4b1 SO |
41 | config MFD_ASIC3 |
42 | bool "Support for Compaq ASIC3" | |
2eedd604 | 43 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 44 | select MFD_CORE |
fa9ff4b1 SO |
45 | ---help--- |
46 | This driver supports the ASIC3 multifunction chip found on many | |
47 | PDAs (mainly iPAQ and HTC based ones) | |
48 | ||
ca26308c MA |
49 | config MFD_DAVINCI_VOICECODEC |
50 | tristate | |
51 | select MFD_CORE | |
52 | ||
0931a4c6 DB |
53 | config MFD_DM355EVM_MSP |
54 | bool "DaVinci DM355 EVM microcontroller" | |
1819ebcf | 55 | depends on I2C=y && MACH_DAVINCI_DM355_EVM |
0931a4c6 DB |
56 | help |
57 | This driver supports the MSP430 microcontroller used on these | |
58 | boards. MSP430 firmware manages resets and power sequencing, | |
59 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
60 | ||
03df0f62 CC |
61 | config MFD_TI_SSP |
62 | tristate "TI Sequencer Serial Port support" | |
63 | depends on ARCH_DAVINCI_TNETV107X | |
64 | select MFD_CORE | |
65 | ---help--- | |
66 | Say Y here if you want support for the Sequencer Serial Port | |
67 | in a Texas Instruments TNETV107X SoC. | |
68 | ||
69 | To compile this driver as a module, choose M here: the | |
70 | module will be called ti-ssp. | |
71 | ||
a1635b8f PZ |
72 | config HTC_EGPIO |
73 | bool "HTC EGPIO support" | |
7444a72e | 74 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
75 | help |
76 | This driver supports the CPLD egpio chip present on | |
77 | several HTC phones. It provides basic support for input | |
78 | pins, output pins, and irqs. | |
79 | ||
5dc3339a PZ |
80 | config HTC_PASIC3 |
81 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 82 | select MFD_CORE |
5dc3339a PZ |
83 | help |
84 | This core driver provides register access for the LED/DS1WM | |
85 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
86 | HTC Magician devices, respectively. Actual functionality is | |
87 | handled by the leds-pasic3 and ds1wm drivers. | |
88 | ||
6048a3dd CM |
89 | config HTC_I2CPLD |
90 | bool "HTC I2C PLD chip support" | |
bef3e20c | 91 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
92 | help |
93 | If you say yes here you get support for the supposed CPLD | |
94 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
95 | This device provides input and output GPIOs through an I2C | |
96 | interface to one or more sub-chips. | |
97 | ||
d9105c2b MV |
98 | config UCB1400_CORE |
99 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 100 | depends on AC97_BUS |
5a49a540 | 101 | depends on GPIOLIB |
d9105c2b MV |
102 | help |
103 | This enables support for the Philips UCB1400 core functions. | |
104 | The UCB1400 is an AC97 audio codec. | |
105 | ||
106 | To compile this driver as a module, choose M here: the | |
107 | module will be called ucb1400_core. | |
108 | ||
798a8eee LW |
109 | config TPS6105X |
110 | tristate "TPS61050/61052 Boost Converters" | |
111 | depends on I2C | |
2edd3b69 | 112 | select REGULATOR |
fc498fa2 | 113 | select MFD_CORE |
2edd3b69 | 114 | select REGULATOR_FIXED_VOLTAGE |
798a8eee LW |
115 | help |
116 | This option enables a driver for the TP61050/TPS61052 | |
117 | high-power "white LED driver". This boost converter is | |
118 | sometimes used for other things than white LEDs, and | |
119 | also contains a GPIO pin. | |
120 | ||
87c13493 DB |
121 | config TPS65010 |
122 | tristate "TPS6501x Power Management chips" | |
123 | depends on I2C && GPIOLIB | |
124 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
125 | help | |
126 | If you say yes here you get support for the TPS6501x series of | |
127 | Power Management chips. These include voltage regulators, | |
128 | lithium ion/polymer battery charging, and other features that | |
129 | are often used in portable devices like cell phones and cameras. | |
130 | ||
131 | This driver can also be built as a module. If so, the module | |
132 | will be called tps65010. | |
133 | ||
31dd6a26 TF |
134 | config TPS6507X |
135 | tristate "TPS6507x Power Management / Touch Screen chips" | |
136 | select MFD_CORE | |
137 | depends on I2C | |
138 | help | |
139 | If you say yes here you get support for the TPS6507x series of | |
140 | Power Management / Touch Screen chips. These include voltage | |
141 | regulators, lithium ion/polymer battery charging, touch screen | |
142 | and other features that are often used in portable devices. | |
143 | This driver can also be built as a module. If so, the module | |
144 | will be called tps6507x. | |
145 | ||
d48f411c AC |
146 | config MFD_TPS65217 |
147 | tristate "TPS65217 Power Management / White LED chips" | |
148 | depends on I2C | |
149 | select MFD_CORE | |
150 | select REGMAP_I2C | |
151 | help | |
152 | If you say yes here you get support for the TPS65217 series of | |
153 | Power Management / White LED chips. | |
154 | These include voltage regulators, lithium ion/polymer battery | |
155 | charger, wled and other features that are often used in portable | |
156 | devices. | |
157 | ||
158 | This driver can also be built as a module. If so, the module | |
159 | will be called tps65217. | |
160 | ||
37df003c AL |
161 | config MFD_TPS6586X |
162 | bool "TPS6586x Power Management chips" | |
163 | depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS | |
164 | select MFD_CORE | |
165 | help | |
166 | If you say yes here you get support for the TPS6586X series of | |
167 | Power Management chips. | |
168 | This driver provides common support for accessing the device, | |
169 | additional drivers must be enabled in order to use the | |
170 | functionality of the device. | |
171 | ||
172 | This driver can also be built as a module. If so, the module | |
173 | will be called tps6586x. | |
174 | ||
54f323b1 LW |
175 | config MFD_TPS65910 |
176 | bool "TPS65910 Power Management chip" | |
177 | depends on I2C=y && GPIOLIB | |
178 | select MFD_CORE | |
179 | select GPIO_TPS65910 | |
dc9913a0 | 180 | select REGMAP_I2C |
54f323b1 LW |
181 | help |
182 | if you say yes here you get support for the TPS65910 series of | |
183 | Power Management chips. | |
184 | ||
36e52873 | 185 | config MFD_TPS65912 |
5608801b | 186 | bool |
36e52873 MO |
187 | depends on GPIOLIB |
188 | ||
189 | config MFD_TPS65912_I2C | |
231dd9c8 | 190 | bool "TPS65912 Power Management chip with I2C" |
36e52873 MO |
191 | select MFD_CORE |
192 | select MFD_TPS65912 | |
193 | depends on I2C=y && GPIOLIB | |
194 | help | |
195 | If you say yes here you get support for the TPS65912 series of | |
196 | PM chips with I2C interface. | |
197 | ||
198 | config MFD_TPS65912_SPI | |
199 | bool "TPS65912 Power Management chip with SPI" | |
200 | select MFD_CORE | |
201 | select MFD_TPS65912 | |
202 | depends on SPI_MASTER && GPIOLIB | |
203 | help | |
204 | If you say yes here you get support for the TPS65912 series of | |
205 | PM chips with SPI interface. | |
206 | ||
88e75cc3 DB |
207 | config MENELAUS |
208 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 209 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
210 | help |
211 | If you say yes here you get support for the Texas Instruments | |
212 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 213 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
214 | and other features that are often used in portable devices like |
215 | cell phones and PDAs. | |
216 | ||
a603a7fa | 217 | config TWL4030_CORE |
e8deb28c | 218 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
6252547b | 219 | depends on I2C=y && GENERIC_HARDIRQS |
280ad7fd | 220 | select IRQ_DOMAIN |
a603a7fa | 221 | help |
e8deb28c | 222 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
223 | This core driver provides register access and IRQ handling |
224 | facilities, and registers devices for the various functions | |
225 | so that function-specific drivers can bind to them. | |
226 | ||
227 | These multi-function chips are found on many OMAP2 and OMAP3 | |
228 | boards, providing power management, RTC, GPIO, keypad, a | |
229 | high speed USB OTG transceiver, an audio codec (on most | |
230 | versions) and many other features. | |
231 | ||
f99c1d4f K |
232 | config TWL4030_MADC |
233 | tristate "Texas Instruments TWL4030 MADC" | |
234 | depends on TWL4030_CORE | |
235 | help | |
236 | This driver provides support for triton TWL4030-MADC. The | |
237 | driver supports both RT and SW conversion methods. | |
238 | ||
239 | This driver can be built as a module. If so it will be | |
240 | named twl4030-madc | |
241 | ||
ebf0bd36 AK |
242 | config TWL4030_POWER |
243 | bool "Support power resources on TWL4030 family chips" | |
244 | depends on TWL4030_CORE && ARM | |
245 | help | |
246 | Say yes here if you want to use the power resources on the | |
247 | TWL4030 family chips. Most of these resources are regulators, | |
248 | which have a separate driver; some are control signals, such | |
249 | as clock request handshaking. | |
250 | ||
251 | This driver uses board-specific data to initialize the resources | |
25985edc | 252 | and load scripts controlling which resources are switched off/on |
ebf0bd36 AK |
253 | or reset when a sleep, wakeup or warm reset event occurs. |
254 | ||
57fe7251 | 255 | config MFD_TWL4030_AUDIO |
0b83ddeb PU |
256 | bool |
257 | depends on TWL4030_CORE | |
258 | select MFD_CORE | |
259 | default n | |
260 | ||
31fc03df H |
261 | config TWL6030_PWM |
262 | tristate "TWL6030 PWM (Pulse Width Modulator) Support" | |
263 | depends on TWL4030_CORE | |
264 | select HAVE_PWM | |
265 | default n | |
266 | help | |
267 | Say yes here if you want support for TWL6030 PWM. | |
268 | This is used to control charging LED brightness. | |
269 | ||
f19b2823 | 270 | config TWL6040_CORE |
8eaeb939 PU |
271 | bool "Support for TWL6040 audio codec" |
272 | depends on I2C=y && GENERIC_HARDIRQS | |
f19b2823 | 273 | select MFD_CORE |
8eaeb939 | 274 | select REGMAP_I2C |
f19b2823 | 275 | default n |
8eaeb939 PU |
276 | help |
277 | Say yes here if you want support for Texas Instruments TWL6040 audio | |
278 | codec. | |
279 | This driver provides common support for accessing the device, | |
280 | additional drivers must be enabled in order to use the | |
281 | functionality of the device (audio, vibra). | |
f19b2823 | 282 | |
27e34995 RV |
283 | config MFD_STMPE |
284 | bool "Support STMicroelectronics STMPE" | |
e789995d | 285 | depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS |
27e34995 RV |
286 | select MFD_CORE |
287 | help | |
288 | Support for the STMPE family of I/O Expanders from | |
289 | STMicroelectronics. | |
290 | ||
291 | Currently supported devices are: | |
292 | ||
293 | STMPE811: GPIO, Touchscreen | |
294 | STMPE1601: GPIO, Keypad | |
295 | STMPE2401: GPIO, Keypad | |
296 | STMPE2403: GPIO, Keypad | |
297 | ||
298 | This driver provides common support for accessing the device, | |
299 | additional drivers must be enabled in order to use the functionality | |
300 | of the device. Currently available sub drivers are: | |
301 | ||
302 | GPIO: stmpe-gpio | |
303 | Keypad: stmpe-keypad | |
304 | Touchscreen: stmpe-ts | |
305 | ||
1a6e4b74 VK |
306 | menu "STMPE Interface Drivers" |
307 | depends on MFD_STMPE | |
308 | ||
309 | config STMPE_I2C | |
310 | bool "STMPE I2C Inteface" | |
eedea80f | 311 | depends on I2C=y |
1a6e4b74 VK |
312 | default y |
313 | help | |
314 | This is used to enable I2C interface of STMPE | |
e789995d VK |
315 | |
316 | config STMPE_SPI | |
317 | bool "STMPE SPI Inteface" | |
318 | depends on SPI_MASTER | |
319 | help | |
320 | This is used to enable SPI interface of STMPE | |
1a6e4b74 VK |
321 | endmenu |
322 | ||
f4e8afdc SI |
323 | config MFD_TC3589X |
324 | bool "Support Toshiba TC35892 and variants" | |
b4ecd326 RV |
325 | depends on I2C=y && GENERIC_HARDIRQS |
326 | select MFD_CORE | |
327 | help | |
f4e8afdc | 328 | Support for the Toshiba TC35892 and variants I/O Expander. |
b4ecd326 RV |
329 | |
330 | This driver provides common support for accessing the device, | |
331 | additional drivers must be enabled in order to use the | |
332 | functionality of the device. | |
333 | ||
1c2c30ac SO |
334 | config MFD_TMIO |
335 | bool | |
336 | default n | |
337 | ||
1f192015 IM |
338 | config MFD_T7L66XB |
339 | bool "Support Toshiba T7L66XB" | |
9ca68233 | 340 | depends on ARM && HAVE_CLK |
1f192015 | 341 | select MFD_CORE |
1c2c30ac | 342 | select MFD_TMIO |
1f192015 IM |
343 | help |
344 | Support for Toshiba Mobile IO Controller T7L66XB | |
345 | ||
cbdfb426 IM |
346 | config MFD_TC6387XB |
347 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 348 | depends on ARM && HAVE_CLK |
cbdfb426 | 349 | select MFD_CORE |
1c2c30ac | 350 | select MFD_TMIO |
cbdfb426 IM |
351 | help |
352 | Support for Toshiba Mobile IO Controller TC6387XB | |
353 | ||
d6315949 DB |
354 | config MFD_TC6393XB |
355 | bool "Support Toshiba TC6393XB" | |
e959da10 | 356 | depends on GPIOLIB && ARM && HAVE_CLK |
f024ff10 | 357 | select MFD_CORE |
1c2c30ac | 358 | select MFD_TMIO |
d6315949 DB |
359 | help |
360 | Support for Toshiba Mobile IO Controller TC6393XB | |
361 | ||
8e2eaabf SO |
362 | config PMIC_DA903X |
363 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
364 | depends on I2C=y | |
365 | help | |
366 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
367 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
368 | usually found on PXA processors-based platforms. This includes | |
369 | the I2C driver and the core APIs _only_, you have to select | |
370 | individual components like LCD backlight, voltage regulators, | |
371 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b | 372 | |
84c99db8 AJ |
373 | config PMIC_DA9052 |
374 | bool | |
375 | select MFD_CORE | |
376 | ||
cfe04478 AJ |
377 | config MFD_DA9052_SPI |
378 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI" | |
379 | select REGMAP_SPI | |
380 | select REGMAP_IRQ | |
381 | select PMIC_DA9052 | |
382 | depends on SPI_MASTER=y | |
383 | help | |
384 | Support for the Dialog Semiconductor DA9052 PMIC | |
385 | when controlled using SPI. This driver provides common support | |
386 | for accessing the device, additional drivers must be enabled in | |
387 | order to use the functionality of the device. | |
388 | ||
84c99db8 AJ |
389 | config MFD_DA9052_I2C |
390 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C" | |
391 | select REGMAP_I2C | |
392 | select REGMAP_IRQ | |
393 | select PMIC_DA9052 | |
394 | depends on I2C=y | |
395 | help | |
396 | Support for the Dialog Semiconductor DA9052 PMIC | |
397 | when controlled using I2C. This driver provides common support | |
398 | for accessing the device, additional drivers must be enabled in | |
399 | order to use the functionality of the device. | |
400 | ||
a5736e0b MH |
401 | config PMIC_ADP5520 |
402 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
403 | depends on I2C=y | |
404 | help | |
405 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
406 | Multifunction Power Management IC. This includes | |
407 | the I2C driver and the core APIs _only_, you have to select | |
408 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
409 | under the corresponding menus. | |
8e2eaabf | 410 | |
d50f8f33 | 411 | config MFD_MAX8925 |
1f1cf8f9 | 412 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 413 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 414 | select MFD_CORE |
d50f8f33 HZ |
415 | help |
416 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
417 | a Power Management IC. This driver provies common support for | |
418 | accessing the device, additional drivers must be enabled in order | |
419 | to use the functionality of the device. | |
420 | ||
527e7e9a MH |
421 | config MFD_MAX8997 |
422 | bool "Maxim Semiconductor MAX8997/8966 PMIC Support" | |
423 | depends on I2C=y && GENERIC_HARDIRQS | |
424 | select MFD_CORE | |
425 | help | |
5a924d13 | 426 | Say yes here to support for Maxim Semiconductor MAX8997/8966. |
527e7e9a MH |
427 | This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, |
428 | MUIC controls on chip. | |
d7e8c01a | 429 | This driver provides common support for accessing the device; |
527e7e9a MH |
430 | additional drivers must be enabled in order to use the functionality |
431 | of the device. | |
432 | ||
156f2528 | 433 | config MFD_MAX8998 |
f8539ddc | 434 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
2c7e6f57 | 435 | depends on I2C=y && GENERIC_HARDIRQS |
156f2528 KP |
436 | select MFD_CORE |
437 | help | |
f8539ddc KP |
438 | Say yes here to support for Maxim Semiconductor MAX8998 and |
439 | National Semiconductor LP3974. This is a Power Management IC. | |
440 | This driver provies common support for accessing the device, | |
441 | additional drivers must be enabled in order to use the functionality | |
442 | of the device. | |
156f2528 | 443 | |
c3d4d697 SK |
444 | config MFD_S5M_CORE |
445 | bool "SAMSUNG S5M Series Support" | |
446 | depends on I2C=y && GENERIC_HARDIRQS | |
447 | select MFD_CORE | |
448 | select REGMAP_I2C | |
449 | help | |
450 | Support for the Samsung Electronics S5M MFD series. | |
451 | This driver provies common support for accessing the device, | |
452 | additional drivers must be enabled in order to use the functionality | |
453 | of the device | |
454 | ||
1d9f9f04 MB |
455 | config MFD_WM8400 |
456 | tristate "Support Wolfson Microelectronics WM8400" | |
b8380c1a | 457 | select MFD_CORE |
9c366452 | 458 | depends on I2C |
2b247d06 | 459 | select REGMAP_I2C |
1d9f9f04 MB |
460 | help |
461 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 462 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
463 | the device, additional drivers must be enabled in order to use |
464 | the functionality of the device. | |
465 | ||
b11062b9 | 466 | config MFD_WM831X |
e5b48684 MB |
467 | bool |
468 | depends on GENERIC_HARDIRQS | |
469 | ||
470 | config MFD_WM831X_I2C | |
471 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C" | |
b11062b9 | 472 | select MFD_CORE |
e5b48684 | 473 | select MFD_WM831X |
1df5981b | 474 | select REGMAP_I2C |
8d002bdc | 475 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 476 | help |
e5b48684 MB |
477 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
478 | when controlled using I2C. This driver provides common support | |
479 | for accessing the device, additional drivers must be enabled in | |
480 | order to use the functionality of the device. | |
b11062b9 | 481 | |
2aa13b9e MB |
482 | config MFD_WM831X_SPI |
483 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI" | |
484 | select MFD_CORE | |
485 | select MFD_WM831X | |
1df5981b | 486 | select REGMAP_SPI |
2aa13b9e MB |
487 | depends on SPI_MASTER && GENERIC_HARDIRQS |
488 | help | |
489 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs | |
490 | when controlled using SPI. This driver provides common support | |
491 | for accessing the device, additional drivers must be enabled in | |
492 | order to use the functionality of the device. | |
493 | ||
89b4012b | 494 | config MFD_WM8350 |
ecf926bc | 495 | bool |
8d002bdc | 496 | depends on GENERIC_HARDIRQS |
89b4012b MB |
497 | |
498 | config MFD_WM8350_CONFIG_MODE_0 | |
499 | bool | |
500 | depends on MFD_WM8350 | |
501 | ||
502 | config MFD_WM8350_CONFIG_MODE_1 | |
503 | bool | |
504 | depends on MFD_WM8350 | |
505 | ||
506 | config MFD_WM8350_CONFIG_MODE_2 | |
507 | bool | |
508 | depends on MFD_WM8350 | |
509 | ||
510 | config MFD_WM8350_CONFIG_MODE_3 | |
511 | bool | |
512 | depends on MFD_WM8350 | |
513 | ||
ca23f8c1 MB |
514 | config MFD_WM8351_CONFIG_MODE_0 |
515 | bool | |
516 | depends on MFD_WM8350 | |
517 | ||
518 | config MFD_WM8351_CONFIG_MODE_1 | |
519 | bool | |
520 | depends on MFD_WM8350 | |
521 | ||
522 | config MFD_WM8351_CONFIG_MODE_2 | |
523 | bool | |
524 | depends on MFD_WM8350 | |
525 | ||
526 | config MFD_WM8351_CONFIG_MODE_3 | |
527 | bool | |
528 | depends on MFD_WM8350 | |
529 | ||
96920630 MB |
530 | config MFD_WM8352_CONFIG_MODE_0 |
531 | bool | |
532 | depends on MFD_WM8350 | |
533 | ||
534 | config MFD_WM8352_CONFIG_MODE_1 | |
535 | bool | |
536 | depends on MFD_WM8350 | |
537 | ||
538 | config MFD_WM8352_CONFIG_MODE_2 | |
539 | bool | |
540 | depends on MFD_WM8350 | |
541 | ||
542 | config MFD_WM8352_CONFIG_MODE_3 | |
543 | bool | |
544 | depends on MFD_WM8350 | |
545 | ||
c661a0b9 | 546 | config MFD_WM8350_I2C |
ecf926bc | 547 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 548 | select MFD_WM8350 |
8d002bdc | 549 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
550 | help |
551 | The WM8350 is an integrated audio and power management | |
552 | subsystem with watchdog and RTC functionality for embedded | |
553 | systems. This option enables core support for the WM8350 with | |
554 | I2C as the control interface. Additional options must be | |
555 | selected to enable support for the functionality of the chip. | |
556 | ||
9e501086 | 557 | config MFD_WM8994 |
c9fbf7e0 | 558 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 559 | select MFD_CORE |
d6c645fc | 560 | select REGMAP_I2C |
8ab30691 | 561 | select REGMAP_IRQ |
c9fbf7e0 | 562 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
563 | help |
564 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
565 | smartphone applicatiosn. As well as audio functionality it | |
566 | has on board GPIO and regulator functionality which is | |
567 | supported via the relevant subsystems. This driver provides | |
568 | core support for the WM8994, in order to use the actual | |
569 | functionaltiy of the device other drivers must be enabled. | |
570 | ||
f52046b1 BR |
571 | config MFD_PCF50633 |
572 | tristate "Support for NXP PCF50633" | |
573 | depends on I2C | |
6e3ad118 | 574 | select REGMAP_I2C |
f52046b1 BR |
575 | help |
576 | Say yes here if you have NXP PCF50633 chip on your board. | |
577 | This core driver provides register access and IRQ handling | |
578 | facilities, and registers devices for the various functions | |
579 | so that function-specific drivers can bind to them. | |
580 | ||
1305134e AL |
581 | config PCF50633_ADC |
582 | tristate "Support for NXP PCF50633 ADC" | |
583 | depends on MFD_PCF50633 | |
584 | help | |
585 | Say yes here if you want to include support for ADC in the | |
586 | NXP PCF50633 chip. | |
587 | ||
588 | config PCF50633_GPIO | |
589 | tristate "Support for NXP PCF50633 GPIO" | |
590 | depends on MFD_PCF50633 | |
591 | help | |
592 | Say yes here if you want to include support GPIO for pins on | |
593 | the PCF50633 chip. | |
594 | ||
8238addc | 595 | config MFD_MC13783 |
8e005935 UKK |
596 | tristate |
597 | ||
598 | config MFD_MC13XXX | |
599 | tristate "Support Freescale MC13783 and MC13892" | |
8238addc SH |
600 | depends on SPI_MASTER |
601 | select MFD_CORE | |
8e005935 | 602 | select MFD_MC13783 |
91b5e741 | 603 | select REGMAP_SPI |
8238addc | 604 | help |
8e005935 UKK |
605 | Support for the Freescale (Atlas) PMIC and audio CODECs |
606 | MC13783 and MC13892. | |
8238addc SH |
607 | This driver provides common support for accessing the device, |
608 | additional drivers must be enabled in order to use the | |
609 | functionality of the device. | |
610 | ||
fa661258 MW |
611 | config ABX500_CORE |
612 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" | |
47c16975 | 613 | default y if ARCH_U300 || ARCH_U8500 |
fa661258 MW |
614 | help |
615 | Say yes here if you have the ABX500 Mixed Signal IC family | |
616 | chips. This core driver expose register access functions. | |
617 | Functionality specific drivers using these functions can | |
618 | remain unchanged when IC changes. Binding of the functions to | |
619 | actual register access is done by the IC core driver. | |
620 | ||
14fa5691 | 621 | config AB3100_CORE |
2071db48 | 622 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
fa661258 | 623 | depends on I2C=y && ABX500_CORE |
8c96aefb | 624 | select MFD_CORE |
14fa5691 LW |
625 | default y if ARCH_U300 |
626 | help | |
627 | Select this to enable the AB3100 Mixed Signal IC core | |
628 | functionality. This connects to a AB3100 on the I2C bus | |
629 | and expose a number of symbols needed for dependent devices | |
630 | to read and write registers and subscribe to events from | |
631 | this multi-functional IC. This is needed to use other features | |
632 | of the AB3100 such as battery-backed RTC, charging control, | |
633 | LEDs, vibrator, system power and temperature, power management | |
634 | and ALSA sound. | |
635 | ||
12992dd8 LW |
636 | config AB3100_OTP |
637 | tristate "ST-Ericsson AB3100 OTP functions" | |
638 | depends on AB3100_CORE | |
639 | default y if AB3100_CORE | |
640 | help | |
641 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
642 | programmable memory) support. This exposes a sysfs file to read | |
643 | out OTP values. | |
644 | ||
13a09f93 DR |
645 | config EZX_PCAP |
646 | bool "PCAP Support" | |
647 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
648 | help | |
649 | This enables the PCAP ASIC present on EZX Phones. This is | |
650 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
651 | ||
3d5e2cab MW |
652 | config AB5500_CORE |
653 | bool "ST-Ericsson AB5500 Mixed Signal Power Management chip" | |
654 | depends on ABX500_CORE && MFD_DB5500_PRCMU | |
655 | select MFD_CORE | |
656 | help | |
657 | Select this option to enable access to AB5500 power management | |
658 | chip. This connects to the db5500 chip via the I2C bus via PRCMU. | |
659 | This chip embeds various other multimedia funtionalities as well. | |
660 | ||
94be70d4 LW |
661 | config AB5500_DEBUG |
662 | bool "Enable debug info via debugfs" | |
663 | depends on AB5500_CORE && DEBUG_FS | |
664 | default y if DEBUG_FS | |
665 | help | |
666 | Select this option if you want debug information from the AB5500 | |
667 | using the debug filesystem, debugfs. | |
668 | ||
62579266 RV |
669 | config AB8500_CORE |
670 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" | |
6680d940 | 671 | depends on GENERIC_HARDIRQS && ABX500_CORE |
62579266 | 672 | select MFD_CORE |
0c41839e | 673 | help |
62579266 | 674 | Select this option to enable access to AB8500 power management |
6680d940 SI |
675 | chip. This connects to U8500 either on the SSP/SPI bus (deprecated |
676 | since hardware version v1.0) or the I2C bus via PRCMU. It also adds | |
677 | the irq_chip parts for handling the Mixed Signal chip events. | |
0c41839e SK |
678 | This chip embeds various other multimedia funtionalities as well. |
679 | ||
39368eda MW |
680 | config AB8500_I2C_CORE |
681 | bool "AB8500 register access via PRCMU I2C" | |
650c2a21 | 682 | depends on AB8500_CORE && MFD_DB8500_PRCMU |
39368eda MW |
683 | default y |
684 | help | |
685 | This enables register access to the AB8500 chip via PRCMU I2C. | |
686 | The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware | |
687 | the I2C bus is connected to the Power Reset | |
688 | and Mangagement Unit, PRCMU. | |
689 | ||
5814fc35 MW |
690 | config AB8500_DEBUG |
691 | bool "Enable debug info via debugfs" | |
692 | depends on AB8500_CORE && DEBUG_FS | |
693 | default y if DEBUG_FS | |
694 | help | |
695 | Select this option if you want debug information using the debug | |
696 | filesystem, debugfs. | |
dae2db30 AM |
697 | |
698 | config AB8500_GPADC | |
699 | bool "AB8500 GPADC driver" | |
700 | depends on AB8500_CORE && REGULATOR_AB8500 | |
701 | default y | |
702 | help | |
703 | AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage | |
5814fc35 | 704 | |
650c2a21 LW |
705 | config MFD_DB8500_PRCMU |
706 | bool "ST-Ericsson DB8500 Power Reset Control Management Unit" | |
707 | depends on UX500_SOC_DB8500 | |
708 | select MFD_CORE | |
709 | help | |
710 | Select this option to enable support for the DB8500 Power Reset | |
711 | and Control Management Unit. This is basically an autonomous | |
712 | system controller running an XP70 microprocessor, which is accessed | |
713 | through a register map. | |
714 | ||
8317797c LW |
715 | config MFD_DB5500_PRCMU |
716 | bool "ST-Ericsson DB5500 Power Reset Control Management Unit" | |
717 | depends on UX500_SOC_DB5500 | |
718 | select MFD_CORE | |
719 | help | |
720 | Select this option to enable support for the DB5500 Power Reset | |
721 | and Control Management Unit. This is basically an autonomous | |
722 | system controller running an XP70 microprocessor, which is accessed | |
723 | through a register map. | |
724 | ||
f71e1afd AS |
725 | config MFD_CS5535 |
726 | tristate "Support for CS5535 and CS5536 southbridge core functions" | |
727 | select MFD_CORE | |
15b7cf14 | 728 | depends on PCI && X86 |
f71e1afd AS |
729 | ---help--- |
730 | This is the core driver for CS5535/CS5536 MFD functions. This is | |
731 | necessary for using the board's GPIO and MFGPT functionality. | |
732 | ||
8edbede9 RR |
733 | config MFD_TIMBERDALE |
734 | tristate "Support for the Timberdale FPGA" | |
735 | select MFD_CORE | |
546e29b6 | 736 | depends on PCI && GPIOLIB |
8edbede9 RR |
737 | ---help--- |
738 | This is the core driver for the timberdale FPGA. This device is a | |
739 | multifunction device which exposes numerous platform devices. | |
740 | ||
741 | The timberdale FPGA can be found on the Intel Atom development board | |
742 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
743 | |
744 | config LPC_SCH | |
745 | tristate "Intel SCH LPC" | |
746 | depends on PCI | |
747 | select MFD_CORE | |
748 | help | |
749 | LPC bridge function of the Intel SCH provides support for | |
750 | System Management Bus and General Purpose I/O. | |
751 | ||
4630b130 AS |
752 | config LPC_ICH |
753 | tristate "Intel ICH LPC" | |
754 | depends on PCI | |
755 | select MFD_CORE | |
756 | help | |
757 | The LPC bridge function of the Intel ICH provides support for | |
758 | many functional units. This driver provides needed support for | |
759 | other drivers to control these functions, currently GPIO. | |
760 | ||
e090d506 FF |
761 | config MFD_RDC321X |
762 | tristate "Support for RDC-R321x southbridge" | |
763 | select MFD_CORE | |
764 | depends on PCI | |
765 | help | |
766 | Say yes here if you want to have support for the RDC R-321x SoC | |
767 | southbridge which provides access to GPIOs and Watchdog using the | |
768 | southbridge PCI device configuration space. | |
769 | ||
bd358132 IS |
770 | config MFD_JANZ_CMODIO |
771 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
772 | select MFD_CORE | |
773 | depends on PCI | |
774 | help | |
775 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
776 | carrier board. This device is a PCI to MODULbus bridge which may | |
777 | host many different types of MODULbus daughterboards, including | |
778 | CAN and GPIO controllers. | |
779 | ||
91f4debf | 780 | config MFD_JZ4740_ADC |
914e6d4e | 781 | bool "Support for the JZ4740 SoC ADC core" |
91f4debf | 782 | select MFD_CORE |
914e6d4e | 783 | select GENERIC_IRQ_CHIP |
91f4debf LPC |
784 | depends on MACH_JZ4740 |
785 | help | |
786 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. | |
787 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. | |
788 | ||
375fc77b DD |
789 | config MFD_VX855 |
790 | tristate "Support for VIA VX855/VX875 integrated south bridge" | |
791 | depends on PCI | |
792 | select MFD_CORE | |
793 | help | |
794 | Say yes here to enable support for various functions of the | |
795 | VIA VX855/VX875 south bridge. You will need to enable the vx855_spi | |
796 | and/or vx855_gpio drivers for this to do anything useful. | |
797 | ||
383268a8 | 798 | config MFD_WL1273_CORE |
94fd5b74 | 799 | tristate "Support for TI WL1273 FM radio." |
383268a8 MA |
800 | depends on I2C |
801 | select MFD_CORE | |
802 | default n | |
803 | help | |
804 | This is the core driver for the TI WL1273 FM radio. This MFD | |
805 | driver connects the radio-wl1273 V4L2 module and the wl1273 | |
806 | audio codec. | |
807 | ||
17cdd29d KM |
808 | config MFD_OMAP_USB_HOST |
809 | bool "Support OMAP USBHS core driver" | |
810 | depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 | |
811 | default y | |
812 | help | |
813 | This is the core driver for the OAMP EHCI and OHCI drivers. | |
814 | This MFD driver does the required setup functionalities for | |
815 | OMAP USB Host drivers. | |
816 | ||
cbdb53e1 AD |
817 | config MFD_PM8XXX |
818 | tristate | |
819 | ||
820 | config MFD_PM8921_CORE | |
821 | tristate "Qualcomm PM8921 PMIC chip" | |
822 | depends on MSM_SSBI | |
823 | select MFD_CORE | |
824 | select MFD_PM8XXX | |
825 | help | |
826 | If you say yes to this option, support will be included for the | |
827 | built-in PM8921 PMIC chip. | |
828 | ||
829 | This is required if your board has a PM8921 and uses its features, | |
830 | such as: MPPs, GPIOs, regulators, interrupts, and PWM. | |
831 | ||
832 | Say M here if you want to include support for PM8921 chip as a module. | |
833 | This will build a module called "pm8921-core". | |
834 | ||
c013f0a5 AD |
835 | config MFD_PM8XXX_IRQ |
836 | bool "Support for Qualcomm PM8xxx IRQ features" | |
837 | depends on MFD_PM8XXX | |
838 | default y if MFD_PM8XXX | |
839 | help | |
840 | This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. | |
841 | ||
842 | This is required to use certain other PM 8xxx features, such as GPIO | |
843 | and MPP. | |
844 | ||
8509e142 AL |
845 | config TPS65911_COMPARATOR |
846 | tristate | |
847 | ||
3c33be06 VB |
848 | config MFD_TPS65090 |
849 | bool "TPS65090 Power Management chips" | |
850 | depends on I2C=y && GENERIC_HARDIRQS | |
851 | select MFD_CORE | |
852 | select REGMAP_I2C | |
853 | help | |
854 | If you say yes here you get support for the TPS65090 series of | |
855 | Power Management chips. | |
856 | This driver provides common support for accessing the device, | |
857 | additional drivers must be enabled in order to use the | |
858 | functionality of the device. | |
859 | ||
09d6292b JP |
860 | config MFD_AAT2870_CORE |
861 | bool "Support for the AnalogicTech AAT2870" | |
862 | select MFD_CORE | |
863 | depends on I2C=y && GPIOLIB | |
864 | help | |
865 | If you say yes here you get support for the AAT2870. | |
866 | This driver provides common support for accessing the device, | |
867 | additional drivers must be enabled in order to use the | |
868 | functionality of the device. | |
869 | ||
1f5a371c MW |
870 | config MFD_INTEL_MSIC |
871 | bool "Support for Intel MSIC" | |
872 | depends on INTEL_SCU_IPC | |
873 | select MFD_CORE | |
874 | help | |
875 | Select this option to enable access to Intel MSIC (Avatele | |
876 | Passage) chip. This chip embeds audio, battery, GPIO, etc. | |
877 | devices used in Intel Medfield platforms. | |
878 | ||
1b1247dd LD |
879 | config MFD_RC5T583 |
880 | bool "Ricoh RC5T583 Power Management system device" | |
5364d0b8 | 881 | depends on I2C=y && GENERIC_HARDIRQS |
1b1247dd LD |
882 | select MFD_CORE |
883 | select REGMAP_I2C | |
884 | help | |
885 | Select this option to get support for the RICOH583 Power | |
886 | Management system device. | |
887 | This driver provides common support for accessing the device | |
888 | through i2c interface. The device supports multiple sub-devices | |
889 | like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. | |
890 | Additional drivers must be enabled in order to use the | |
891 | different functionality of the device. | |
892 | ||
75060a1d YCLP |
893 | config MFD_ANATOP |
894 | bool "Support for Freescale i.MX on-chip ANATOP controller" | |
895 | depends on SOC_IMX6Q | |
896 | help | |
897 | Select this option to enable Freescale i.MX on-chip ANATOP | |
898 | MFD controller. This controller embeds regulator and | |
899 | thermal devices for Freescale i.MX platforms. | |
900 | ||
8a0a8e8e AB |
901 | endmenu |
902 | endif | |
b6d6454f | 903 | |
a4e137ab | 904 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 905 | depends on ARCH_SA1100 |
a4e137ab RK |
906 | |
907 | config MCP | |
908 | tristate | |
909 | ||
5e742ad6 RK |
910 | # Interface drivers |
911 | config MCP_SA11X0 | |
912 | tristate "Support SA11x0 MCP interface" | |
913 | depends on ARCH_SA1100 | |
914 | select MCP | |
915 | ||
05c45ca9 RK |
916 | # Chip drivers |
917 | config MCP_UCB1200 | |
a3364409 RK |
918 | bool "Support for UCB1200 / UCB1300" |
919 | depends on MCP_SA11X0 | |
920 | select MCP | |
05c45ca9 | 921 | |
acb45439 RK |
922 | config MCP_UCB1200_TS |
923 | tristate "Touchscreen interface support" | |
924 | depends on MCP_UCB1200 && INPUT | |
925 | ||
a4e137ab | 926 | endmenu |