]>
Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
8a0a8e8e AB |
5 | if HAS_IOMEM |
6 | menu "Multifunction device drivers" | |
b6d6454f | 7 | |
aa613de6 DES |
8 | config MFD_CORE |
9 | tristate | |
c94bb233 | 10 | select IRQ_DOMAIN |
aa613de6 DES |
11 | default n |
12 | ||
2cc50bee HZ |
13 | config MFD_88PM860X |
14 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 15 | depends on I2C=y && GENERIC_HARDIRQS |
b46a36c0 | 16 | select REGMAP_I2C |
2cc50bee HZ |
17 | select MFD_CORE |
18 | help | |
19 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
20 | This includes the I2C driver and the core APIs _only_, you have to | |
21 | select individual components like voltage regulators, RTC and | |
22 | battery-charger under the corresponding menus. | |
23 | ||
b6d6454f BD |
24 | config MFD_SM501 |
25 | tristate "Support for Silicon Motion SM501" | |
26 | ---help--- | |
27 | This is the core driver for the Silicon Motion SM501 multimedia | |
28 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
29 | provide numerous interfaces including USB host controller, USB gadget, |
30 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
31 | interface. The device may be connected by PCI or local bus with |
32 | varying functions enabled. | |
33 | ||
f61be273 BD |
34 | config MFD_SM501_GPIO |
35 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 36 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
37 | ---help--- |
38 | This option uses the gpio library layer to export the 64 GPIO | |
39 | lines on the SM501. The platform data is used to supply the | |
40 | base number for the first GPIO line to register. | |
41 | ||
fa9ff4b1 SO |
42 | config MFD_ASIC3 |
43 | bool "Support for Compaq ASIC3" | |
2eedd604 | 44 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 45 | select MFD_CORE |
fa9ff4b1 SO |
46 | ---help--- |
47 | This driver supports the ASIC3 multifunction chip found on many | |
48 | PDAs (mainly iPAQ and HTC based ones) | |
49 | ||
ca26308c MA |
50 | config MFD_DAVINCI_VOICECODEC |
51 | tristate | |
52 | select MFD_CORE | |
53 | ||
0931a4c6 DB |
54 | config MFD_DM355EVM_MSP |
55 | bool "DaVinci DM355 EVM microcontroller" | |
1819ebcf | 56 | depends on I2C=y && MACH_DAVINCI_DM355_EVM |
0931a4c6 DB |
57 | help |
58 | This driver supports the MSP430 microcontroller used on these | |
59 | boards. MSP430 firmware manages resets and power sequencing, | |
60 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
61 | ||
03df0f62 CC |
62 | config MFD_TI_SSP |
63 | tristate "TI Sequencer Serial Port support" | |
64 | depends on ARCH_DAVINCI_TNETV107X | |
65 | select MFD_CORE | |
66 | ---help--- | |
67 | Say Y here if you want support for the Sequencer Serial Port | |
68 | in a Texas Instruments TNETV107X SoC. | |
69 | ||
70 | To compile this driver as a module, choose M here: the | |
71 | module will be called ti-ssp. | |
72 | ||
a1635b8f PZ |
73 | config HTC_EGPIO |
74 | bool "HTC EGPIO support" | |
7444a72e | 75 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
76 | help |
77 | This driver supports the CPLD egpio chip present on | |
78 | several HTC phones. It provides basic support for input | |
79 | pins, output pins, and irqs. | |
80 | ||
5dc3339a PZ |
81 | config HTC_PASIC3 |
82 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 83 | select MFD_CORE |
5dc3339a PZ |
84 | help |
85 | This core driver provides register access for the LED/DS1WM | |
86 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
87 | HTC Magician devices, respectively. Actual functionality is | |
88 | handled by the leds-pasic3 and ds1wm drivers. | |
89 | ||
6048a3dd CM |
90 | config HTC_I2CPLD |
91 | bool "HTC I2C PLD chip support" | |
bef3e20c | 92 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
93 | help |
94 | If you say yes here you get support for the supposed CPLD | |
95 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
96 | This device provides input and output GPIOs through an I2C | |
97 | interface to one or more sub-chips. | |
98 | ||
d9105c2b MV |
99 | config UCB1400_CORE |
100 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 101 | depends on AC97_BUS |
5a49a540 | 102 | depends on GPIOLIB |
d9105c2b MV |
103 | help |
104 | This enables support for the Philips UCB1400 core functions. | |
105 | The UCB1400 is an AC97 audio codec. | |
106 | ||
107 | To compile this driver as a module, choose M here: the | |
108 | module will be called ucb1400_core. | |
109 | ||
16c5c023 JH |
110 | config MFD_LM3533 |
111 | tristate "LM3533 Lighting Power chip" | |
112 | depends on I2C | |
113 | select MFD_CORE | |
114 | select REGMAP_I2C | |
115 | help | |
116 | Say yes here to enable support for National Semiconductor / TI | |
117 | LM3533 Lighting Power chips. | |
118 | ||
119 | This driver provides common support for accessing the device; | |
120 | additional drivers must be enabled in order to use the LED, | |
121 | backlight or ambient-light-sensor functionality of the device. | |
122 | ||
798a8eee LW |
123 | config TPS6105X |
124 | tristate "TPS61050/61052 Boost Converters" | |
125 | depends on I2C | |
2edd3b69 | 126 | select REGULATOR |
fc498fa2 | 127 | select MFD_CORE |
2edd3b69 | 128 | select REGULATOR_FIXED_VOLTAGE |
798a8eee LW |
129 | help |
130 | This option enables a driver for the TP61050/TPS61052 | |
131 | high-power "white LED driver". This boost converter is | |
132 | sometimes used for other things than white LEDs, and | |
133 | also contains a GPIO pin. | |
134 | ||
87c13493 DB |
135 | config TPS65010 |
136 | tristate "TPS6501x Power Management chips" | |
137 | depends on I2C && GPIOLIB | |
138 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
139 | help | |
140 | If you say yes here you get support for the TPS6501x series of | |
141 | Power Management chips. These include voltage regulators, | |
142 | lithium ion/polymer battery charging, and other features that | |
143 | are often used in portable devices like cell phones and cameras. | |
144 | ||
145 | This driver can also be built as a module. If so, the module | |
146 | will be called tps65010. | |
147 | ||
31dd6a26 TF |
148 | config TPS6507X |
149 | tristate "TPS6507x Power Management / Touch Screen chips" | |
150 | select MFD_CORE | |
151 | depends on I2C | |
152 | help | |
153 | If you say yes here you get support for the TPS6507x series of | |
154 | Power Management / Touch Screen chips. These include voltage | |
155 | regulators, lithium ion/polymer battery charging, touch screen | |
156 | and other features that are often used in portable devices. | |
157 | This driver can also be built as a module. If so, the module | |
158 | will be called tps6507x. | |
159 | ||
d48f411c AC |
160 | config MFD_TPS65217 |
161 | tristate "TPS65217 Power Management / White LED chips" | |
162 | depends on I2C | |
163 | select MFD_CORE | |
164 | select REGMAP_I2C | |
165 | help | |
166 | If you say yes here you get support for the TPS65217 series of | |
167 | Power Management / White LED chips. | |
168 | These include voltage regulators, lithium ion/polymer battery | |
169 | charger, wled and other features that are often used in portable | |
170 | devices. | |
171 | ||
172 | This driver can also be built as a module. If so, the module | |
173 | will be called tps65217. | |
174 | ||
37df003c AL |
175 | config MFD_TPS6586X |
176 | bool "TPS6586x Power Management chips" | |
177 | depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS | |
178 | select MFD_CORE | |
b4410a89 | 179 | depends on REGULATOR |
37df003c AL |
180 | help |
181 | If you say yes here you get support for the TPS6586X series of | |
182 | Power Management chips. | |
183 | This driver provides common support for accessing the device, | |
184 | additional drivers must be enabled in order to use the | |
185 | functionality of the device. | |
186 | ||
187 | This driver can also be built as a module. If so, the module | |
188 | will be called tps6586x. | |
189 | ||
54f323b1 LW |
190 | config MFD_TPS65910 |
191 | bool "TPS65910 Power Management chip" | |
192 | depends on I2C=y && GPIOLIB | |
193 | select MFD_CORE | |
dc9913a0 | 194 | select REGMAP_I2C |
21f7541d | 195 | select IRQ_DOMAIN |
54f323b1 LW |
196 | help |
197 | if you say yes here you get support for the TPS65910 series of | |
198 | Power Management chips. | |
199 | ||
36e52873 | 200 | config MFD_TPS65912 |
5608801b | 201 | bool |
36e52873 MO |
202 | depends on GPIOLIB |
203 | ||
204 | config MFD_TPS65912_I2C | |
231dd9c8 | 205 | bool "TPS65912 Power Management chip with I2C" |
36e52873 MO |
206 | select MFD_CORE |
207 | select MFD_TPS65912 | |
208 | depends on I2C=y && GPIOLIB | |
209 | help | |
210 | If you say yes here you get support for the TPS65912 series of | |
211 | PM chips with I2C interface. | |
212 | ||
213 | config MFD_TPS65912_SPI | |
214 | bool "TPS65912 Power Management chip with SPI" | |
215 | select MFD_CORE | |
216 | select MFD_TPS65912 | |
217 | depends on SPI_MASTER && GPIOLIB | |
218 | help | |
219 | If you say yes here you get support for the TPS65912 series of | |
220 | PM chips with SPI interface. | |
221 | ||
88e75cc3 DB |
222 | config MENELAUS |
223 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 224 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
225 | help |
226 | If you say yes here you get support for the Texas Instruments | |
227 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 228 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
229 | and other features that are often used in portable devices like |
230 | cell phones and PDAs. | |
231 | ||
a603a7fa | 232 | config TWL4030_CORE |
e8deb28c | 233 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
6252547b | 234 | depends on I2C=y && GENERIC_HARDIRQS |
280ad7fd | 235 | select IRQ_DOMAIN |
a603a7fa | 236 | help |
e8deb28c | 237 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
238 | This core driver provides register access and IRQ handling |
239 | facilities, and registers devices for the various functions | |
240 | so that function-specific drivers can bind to them. | |
241 | ||
242 | These multi-function chips are found on many OMAP2 and OMAP3 | |
243 | boards, providing power management, RTC, GPIO, keypad, a | |
244 | high speed USB OTG transceiver, an audio codec (on most | |
245 | versions) and many other features. | |
246 | ||
f99c1d4f K |
247 | config TWL4030_MADC |
248 | tristate "Texas Instruments TWL4030 MADC" | |
249 | depends on TWL4030_CORE | |
250 | help | |
251 | This driver provides support for triton TWL4030-MADC. The | |
252 | driver supports both RT and SW conversion methods. | |
253 | ||
254 | This driver can be built as a module. If so it will be | |
255 | named twl4030-madc | |
256 | ||
ebf0bd36 AK |
257 | config TWL4030_POWER |
258 | bool "Support power resources on TWL4030 family chips" | |
259 | depends on TWL4030_CORE && ARM | |
260 | help | |
261 | Say yes here if you want to use the power resources on the | |
262 | TWL4030 family chips. Most of these resources are regulators, | |
263 | which have a separate driver; some are control signals, such | |
264 | as clock request handshaking. | |
265 | ||
266 | This driver uses board-specific data to initialize the resources | |
25985edc | 267 | and load scripts controlling which resources are switched off/on |
ebf0bd36 AK |
268 | or reset when a sleep, wakeup or warm reset event occurs. |
269 | ||
57fe7251 | 270 | config MFD_TWL4030_AUDIO |
0b83ddeb PU |
271 | bool |
272 | depends on TWL4030_CORE | |
273 | select MFD_CORE | |
274 | default n | |
275 | ||
31fc03df H |
276 | config TWL6030_PWM |
277 | tristate "TWL6030 PWM (Pulse Width Modulator) Support" | |
278 | depends on TWL4030_CORE | |
279 | select HAVE_PWM | |
280 | default n | |
281 | help | |
282 | Say yes here if you want support for TWL6030 PWM. | |
283 | This is used to control charging LED brightness. | |
284 | ||
f19b2823 | 285 | config TWL6040_CORE |
8eaeb939 PU |
286 | bool "Support for TWL6040 audio codec" |
287 | depends on I2C=y && GENERIC_HARDIRQS | |
f19b2823 | 288 | select MFD_CORE |
8eaeb939 | 289 | select REGMAP_I2C |
f19b2823 | 290 | default n |
8eaeb939 PU |
291 | help |
292 | Say yes here if you want support for Texas Instruments TWL6040 audio | |
293 | codec. | |
294 | This driver provides common support for accessing the device, | |
295 | additional drivers must be enabled in order to use the | |
296 | functionality of the device (audio, vibra). | |
f19b2823 | 297 | |
27e34995 RV |
298 | config MFD_STMPE |
299 | bool "Support STMicroelectronics STMPE" | |
e789995d | 300 | depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS |
27e34995 RV |
301 | select MFD_CORE |
302 | help | |
303 | Support for the STMPE family of I/O Expanders from | |
304 | STMicroelectronics. | |
305 | ||
306 | Currently supported devices are: | |
307 | ||
308 | STMPE811: GPIO, Touchscreen | |
309 | STMPE1601: GPIO, Keypad | |
310 | STMPE2401: GPIO, Keypad | |
311 | STMPE2403: GPIO, Keypad | |
312 | ||
313 | This driver provides common support for accessing the device, | |
314 | additional drivers must be enabled in order to use the functionality | |
315 | of the device. Currently available sub drivers are: | |
316 | ||
317 | GPIO: stmpe-gpio | |
318 | Keypad: stmpe-keypad | |
319 | Touchscreen: stmpe-ts | |
320 | ||
1a6e4b74 VK |
321 | menu "STMPE Interface Drivers" |
322 | depends on MFD_STMPE | |
323 | ||
324 | config STMPE_I2C | |
325 | bool "STMPE I2C Inteface" | |
eedea80f | 326 | depends on I2C=y |
1a6e4b74 VK |
327 | default y |
328 | help | |
329 | This is used to enable I2C interface of STMPE | |
e789995d VK |
330 | |
331 | config STMPE_SPI | |
332 | bool "STMPE SPI Inteface" | |
333 | depends on SPI_MASTER | |
334 | help | |
335 | This is used to enable SPI interface of STMPE | |
1a6e4b74 VK |
336 | endmenu |
337 | ||
f4e8afdc SI |
338 | config MFD_TC3589X |
339 | bool "Support Toshiba TC35892 and variants" | |
b4ecd326 RV |
340 | depends on I2C=y && GENERIC_HARDIRQS |
341 | select MFD_CORE | |
342 | help | |
f4e8afdc | 343 | Support for the Toshiba TC35892 and variants I/O Expander. |
b4ecd326 RV |
344 | |
345 | This driver provides common support for accessing the device, | |
346 | additional drivers must be enabled in order to use the | |
347 | functionality of the device. | |
348 | ||
1c2c30ac SO |
349 | config MFD_TMIO |
350 | bool | |
351 | default n | |
352 | ||
1f192015 IM |
353 | config MFD_T7L66XB |
354 | bool "Support Toshiba T7L66XB" | |
9ca68233 | 355 | depends on ARM && HAVE_CLK |
1f192015 | 356 | select MFD_CORE |
1c2c30ac | 357 | select MFD_TMIO |
1f192015 IM |
358 | help |
359 | Support for Toshiba Mobile IO Controller T7L66XB | |
360 | ||
cbdfb426 IM |
361 | config MFD_TC6387XB |
362 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 363 | depends on ARM && HAVE_CLK |
cbdfb426 | 364 | select MFD_CORE |
1c2c30ac | 365 | select MFD_TMIO |
cbdfb426 IM |
366 | help |
367 | Support for Toshiba Mobile IO Controller TC6387XB | |
368 | ||
d6315949 DES |
369 | config MFD_TC6393XB |
370 | bool "Support Toshiba TC6393XB" | |
e959da10 | 371 | depends on GPIOLIB && ARM && HAVE_CLK |
f024ff10 | 372 | select MFD_CORE |
1c2c30ac | 373 | select MFD_TMIO |
d6315949 DES |
374 | help |
375 | Support for Toshiba Mobile IO Controller TC6393XB | |
376 | ||
8e2eaabf SO |
377 | config PMIC_DA903X |
378 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
379 | depends on I2C=y | |
380 | help | |
381 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
382 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
383 | usually found on PXA processors-based platforms. This includes | |
384 | the I2C driver and the core APIs _only_, you have to select | |
385 | individual components like LCD backlight, voltage regulators, | |
386 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b | 387 | |
84c99db8 AJ |
388 | config PMIC_DA9052 |
389 | bool | |
390 | select MFD_CORE | |
391 | ||
cfe04478 AJ |
392 | config MFD_DA9052_SPI |
393 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI" | |
394 | select REGMAP_SPI | |
395 | select REGMAP_IRQ | |
396 | select PMIC_DA9052 | |
397 | depends on SPI_MASTER=y | |
398 | help | |
399 | Support for the Dialog Semiconductor DA9052 PMIC | |
400 | when controlled using SPI. This driver provides common support | |
401 | for accessing the device, additional drivers must be enabled in | |
402 | order to use the functionality of the device. | |
403 | ||
84c99db8 AJ |
404 | config MFD_DA9052_I2C |
405 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C" | |
406 | select REGMAP_I2C | |
407 | select REGMAP_IRQ | |
408 | select PMIC_DA9052 | |
409 | depends on I2C=y | |
410 | help | |
411 | Support for the Dialog Semiconductor DA9052 PMIC | |
412 | when controlled using I2C. This driver provides common support | |
413 | for accessing the device, additional drivers must be enabled in | |
414 | order to use the functionality of the device. | |
415 | ||
a5736e0b MH |
416 | config PMIC_ADP5520 |
417 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
418 | depends on I2C=y | |
419 | help | |
420 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
421 | Multifunction Power Management IC. This includes | |
422 | the I2C driver and the core APIs _only_, you have to select | |
423 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
424 | under the corresponding menus. | |
8e2eaabf | 425 | |
dae8a969 JL |
426 | config MFD_MAX77686 |
427 | bool "Maxim Semiconductor MAX77686 PMIC Support" | |
428 | depends on I2C=y && GENERIC_HARDIRQS | |
429 | select MFD_CORE | |
430 | select REGMAP_I2C | |
431 | select IRQ_DOMAIN | |
432 | help | |
433 | Say yes here to support for Maxim Semiconductor MAX77686. | |
434 | This is a Power Management IC with RTC on chip. | |
435 | This driver provides common support for accessing the device; | |
436 | additional drivers must be enabled in order to use the functionality | |
437 | of the device. | |
438 | ||
83871c00 CC |
439 | config MFD_MAX77693 |
440 | bool "Maxim Semiconductor MAX77693 PMIC Support" | |
441 | depends on I2C=y && GENERIC_HARDIRQS | |
442 | select MFD_CORE | |
29f772d4 | 443 | select REGMAP_I2C |
83871c00 CC |
444 | help |
445 | Say yes here to support for Maxim Semiconductor MAX77693. | |
446 | This is a companion Power Management IC with Flash, Haptic, Charger, | |
447 | and MUIC(Micro USB Interface Controller) controls on chip. | |
448 | This driver provides common support for accessing the device; | |
449 | additional drivers must be enabled in order to use the functionality | |
450 | of the device. | |
451 | ||
d50f8f33 | 452 | config MFD_MAX8925 |
1f1cf8f9 | 453 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 454 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 455 | select MFD_CORE |
d50f8f33 HZ |
456 | help |
457 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
6b2aac42 | 458 | a Power Management IC. This driver provides common support for |
d50f8f33 HZ |
459 | accessing the device, additional drivers must be enabled in order |
460 | to use the functionality of the device. | |
461 | ||
527e7e9a MH |
462 | config MFD_MAX8997 |
463 | bool "Maxim Semiconductor MAX8997/8966 PMIC Support" | |
464 | depends on I2C=y && GENERIC_HARDIRQS | |
465 | select MFD_CORE | |
466 | help | |
5a924d13 | 467 | Say yes here to support for Maxim Semiconductor MAX8997/8966. |
527e7e9a MH |
468 | This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, |
469 | MUIC controls on chip. | |
d7e8c01a | 470 | This driver provides common support for accessing the device; |
527e7e9a MH |
471 | additional drivers must be enabled in order to use the functionality |
472 | of the device. | |
473 | ||
156f2528 | 474 | config MFD_MAX8998 |
f8539ddc | 475 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
2c7e6f57 | 476 | depends on I2C=y && GENERIC_HARDIRQS |
156f2528 KP |
477 | select MFD_CORE |
478 | help | |
f8539ddc KP |
479 | Say yes here to support for Maxim Semiconductor MAX8998 and |
480 | National Semiconductor LP3974. This is a Power Management IC. | |
6b2aac42 | 481 | This driver provides common support for accessing the device, |
f8539ddc KP |
482 | additional drivers must be enabled in order to use the functionality |
483 | of the device. | |
156f2528 | 484 | |
c3d4d697 SK |
485 | config MFD_S5M_CORE |
486 | bool "SAMSUNG S5M Series Support" | |
487 | depends on I2C=y && GENERIC_HARDIRQS | |
488 | select MFD_CORE | |
489 | select REGMAP_I2C | |
490 | help | |
491 | Support for the Samsung Electronics S5M MFD series. | |
6b2aac42 | 492 | This driver provides common support for accessing the device, |
c3d4d697 SK |
493 | additional drivers must be enabled in order to use the functionality |
494 | of the device | |
495 | ||
1d9f9f04 | 496 | config MFD_WM8400 |
eee0e4b4 | 497 | bool "Support Wolfson Microelectronics WM8400" |
b8380c1a | 498 | select MFD_CORE |
08b4c118 | 499 | depends on I2C=y |
2b247d06 | 500 | select REGMAP_I2C |
1d9f9f04 MB |
501 | help |
502 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 503 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
504 | the device, additional drivers must be enabled in order to use |
505 | the functionality of the device. | |
506 | ||
b11062b9 | 507 | config MFD_WM831X |
e5b48684 MB |
508 | bool |
509 | depends on GENERIC_HARDIRQS | |
510 | ||
511 | config MFD_WM831X_I2C | |
512 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C" | |
b11062b9 | 513 | select MFD_CORE |
e5b48684 | 514 | select MFD_WM831X |
1df5981b | 515 | select REGMAP_I2C |
cd99758b | 516 | select IRQ_DOMAIN |
8d002bdc | 517 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 518 | help |
e5b48684 MB |
519 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
520 | when controlled using I2C. This driver provides common support | |
521 | for accessing the device, additional drivers must be enabled in | |
522 | order to use the functionality of the device. | |
b11062b9 | 523 | |
2aa13b9e MB |
524 | config MFD_WM831X_SPI |
525 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI" | |
526 | select MFD_CORE | |
527 | select MFD_WM831X | |
1df5981b | 528 | select REGMAP_SPI |
cd99758b | 529 | select IRQ_DOMAIN |
2aa13b9e MB |
530 | depends on SPI_MASTER && GENERIC_HARDIRQS |
531 | help | |
532 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs | |
533 | when controlled using SPI. This driver provides common support | |
534 | for accessing the device, additional drivers must be enabled in | |
535 | order to use the functionality of the device. | |
536 | ||
89b4012b | 537 | config MFD_WM8350 |
ecf926bc | 538 | bool |
8d002bdc | 539 | depends on GENERIC_HARDIRQS |
89b4012b MB |
540 | |
541 | config MFD_WM8350_CONFIG_MODE_0 | |
542 | bool | |
543 | depends on MFD_WM8350 | |
544 | ||
545 | config MFD_WM8350_CONFIG_MODE_1 | |
546 | bool | |
547 | depends on MFD_WM8350 | |
548 | ||
549 | config MFD_WM8350_CONFIG_MODE_2 | |
550 | bool | |
551 | depends on MFD_WM8350 | |
552 | ||
553 | config MFD_WM8350_CONFIG_MODE_3 | |
554 | bool | |
555 | depends on MFD_WM8350 | |
556 | ||
ca23f8c1 MB |
557 | config MFD_WM8351_CONFIG_MODE_0 |
558 | bool | |
559 | depends on MFD_WM8350 | |
560 | ||
561 | config MFD_WM8351_CONFIG_MODE_1 | |
562 | bool | |
563 | depends on MFD_WM8350 | |
564 | ||
565 | config MFD_WM8351_CONFIG_MODE_2 | |
566 | bool | |
567 | depends on MFD_WM8350 | |
568 | ||
569 | config MFD_WM8351_CONFIG_MODE_3 | |
570 | bool | |
571 | depends on MFD_WM8350 | |
572 | ||
96920630 MB |
573 | config MFD_WM8352_CONFIG_MODE_0 |
574 | bool | |
575 | depends on MFD_WM8350 | |
576 | ||
577 | config MFD_WM8352_CONFIG_MODE_1 | |
578 | bool | |
579 | depends on MFD_WM8350 | |
580 | ||
581 | config MFD_WM8352_CONFIG_MODE_2 | |
582 | bool | |
583 | depends on MFD_WM8350 | |
584 | ||
585 | config MFD_WM8352_CONFIG_MODE_3 | |
586 | bool | |
587 | depends on MFD_WM8350 | |
588 | ||
c661a0b9 | 589 | config MFD_WM8350_I2C |
ecf926bc | 590 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 591 | select MFD_WM8350 |
8d002bdc | 592 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
593 | help |
594 | The WM8350 is an integrated audio and power management | |
595 | subsystem with watchdog and RTC functionality for embedded | |
596 | systems. This option enables core support for the WM8350 with | |
597 | I2C as the control interface. Additional options must be | |
598 | selected to enable support for the functionality of the chip. | |
599 | ||
9e501086 | 600 | config MFD_WM8994 |
c9fbf7e0 | 601 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 602 | select MFD_CORE |
d6c645fc | 603 | select REGMAP_I2C |
8ab30691 | 604 | select REGMAP_IRQ |
c9fbf7e0 | 605 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
606 | help |
607 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
608 | smartphone applicatiosn. As well as audio functionality it | |
609 | has on board GPIO and regulator functionality which is | |
610 | supported via the relevant subsystems. This driver provides | |
611 | core support for the WM8994, in order to use the actual | |
612 | functionaltiy of the device other drivers must be enabled. | |
613 | ||
f52046b1 BR |
614 | config MFD_PCF50633 |
615 | tristate "Support for NXP PCF50633" | |
616 | depends on I2C | |
6e3ad118 | 617 | select REGMAP_I2C |
f52046b1 BR |
618 | help |
619 | Say yes here if you have NXP PCF50633 chip on your board. | |
620 | This core driver provides register access and IRQ handling | |
621 | facilities, and registers devices for the various functions | |
622 | so that function-specific drivers can bind to them. | |
623 | ||
1305134e AL |
624 | config PCF50633_ADC |
625 | tristate "Support for NXP PCF50633 ADC" | |
626 | depends on MFD_PCF50633 | |
627 | help | |
628 | Say yes here if you want to include support for ADC in the | |
629 | NXP PCF50633 chip. | |
630 | ||
631 | config PCF50633_GPIO | |
632 | tristate "Support for NXP PCF50633 GPIO" | |
633 | depends on MFD_PCF50633 | |
634 | help | |
635 | Say yes here if you want to include support GPIO for pins on | |
636 | the PCF50633 chip. | |
637 | ||
8238addc | 638 | config MFD_MC13783 |
8e005935 UKK |
639 | tristate |
640 | ||
641 | config MFD_MC13XXX | |
1cb3642a | 642 | tristate |
df3df646 | 643 | depends on SPI_MASTER || I2C |
8238addc | 644 | select MFD_CORE |
8e005935 | 645 | select MFD_MC13783 |
8238addc | 646 | help |
a0c7c1d4 MR |
647 | Enable support for the Freescale MC13783 and MC13892 PMICs. |
648 | This driver provides common support for accessing the device, | |
8238addc SH |
649 | additional drivers must be enabled in order to use the |
650 | functionality of the device. | |
651 | ||
a0c7c1d4 | 652 | config MFD_MC13XXX_SPI |
1cb3642a MB |
653 | tristate "Freescale MC13783 and MC13892 SPI interface" |
654 | depends on SPI_MASTER | |
a0c7c1d4 | 655 | select REGMAP_SPI |
1cb3642a | 656 | select MFD_MC13XXX |
a0c7c1d4 MR |
657 | help |
658 | Select this if your MC13xxx is connected via an SPI bus. | |
659 | ||
df3df646 | 660 | config MFD_MC13XXX_I2C |
1cb3642a MB |
661 | tristate "Freescale MC13892 I2C interface" |
662 | depends on I2C | |
df3df646 | 663 | select REGMAP_I2C |
1cb3642a | 664 | select MFD_MC13XXX |
df3df646 MR |
665 | help |
666 | Select this if your MC13xxx is connected via an I2C bus. | |
667 | ||
fa661258 MW |
668 | config ABX500_CORE |
669 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" | |
47c16975 | 670 | default y if ARCH_U300 || ARCH_U8500 |
fa661258 MW |
671 | help |
672 | Say yes here if you have the ABX500 Mixed Signal IC family | |
673 | chips. This core driver expose register access functions. | |
674 | Functionality specific drivers using these functions can | |
675 | remain unchanged when IC changes. Binding of the functions to | |
676 | actual register access is done by the IC core driver. | |
677 | ||
14fa5691 | 678 | config AB3100_CORE |
2071db48 | 679 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
fa661258 | 680 | depends on I2C=y && ABX500_CORE |
8c96aefb | 681 | select MFD_CORE |
14fa5691 LW |
682 | default y if ARCH_U300 |
683 | help | |
684 | Select this to enable the AB3100 Mixed Signal IC core | |
685 | functionality. This connects to a AB3100 on the I2C bus | |
686 | and expose a number of symbols needed for dependent devices | |
687 | to read and write registers and subscribe to events from | |
688 | this multi-functional IC. This is needed to use other features | |
689 | of the AB3100 such as battery-backed RTC, charging control, | |
690 | LEDs, vibrator, system power and temperature, power management | |
691 | and ALSA sound. | |
692 | ||
12992dd8 LW |
693 | config AB3100_OTP |
694 | tristate "ST-Ericsson AB3100 OTP functions" | |
695 | depends on AB3100_CORE | |
696 | default y if AB3100_CORE | |
697 | help | |
698 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
699 | programmable memory) support. This exposes a sysfs file to read | |
700 | out OTP values. | |
701 | ||
13a09f93 DR |
702 | config EZX_PCAP |
703 | bool "PCAP Support" | |
704 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
705 | help | |
706 | This enables the PCAP ASIC present on EZX Phones. This is | |
707 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
708 | ||
62579266 RV |
709 | config AB8500_CORE |
710 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" | |
21f082a6 | 711 | depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU |
62579266 | 712 | select MFD_CORE |
06e589ef | 713 | select IRQ_DOMAIN |
0c41839e | 714 | help |
62579266 | 715 | Select this option to enable access to AB8500 power management |
6680d940 SI |
716 | chip. This connects to U8500 either on the SSP/SPI bus (deprecated |
717 | since hardware version v1.0) or the I2C bus via PRCMU. It also adds | |
718 | the irq_chip parts for handling the Mixed Signal chip events. | |
0c41839e SK |
719 | This chip embeds various other multimedia funtionalities as well. |
720 | ||
5814fc35 MW |
721 | config AB8500_DEBUG |
722 | bool "Enable debug info via debugfs" | |
723 | depends on AB8500_CORE && DEBUG_FS | |
724 | default y if DEBUG_FS | |
725 | help | |
726 | Select this option if you want debug information using the debug | |
727 | filesystem, debugfs. | |
dae2db30 AM |
728 | |
729 | config AB8500_GPADC | |
730 | bool "AB8500 GPADC driver" | |
731 | depends on AB8500_CORE && REGULATOR_AB8500 | |
732 | default y | |
733 | help | |
734 | AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage | |
5814fc35 | 735 | |
650c2a21 LW |
736 | config MFD_DB8500_PRCMU |
737 | bool "ST-Ericsson DB8500 Power Reset Control Management Unit" | |
738 | depends on UX500_SOC_DB8500 | |
739 | select MFD_CORE | |
740 | help | |
741 | Select this option to enable support for the DB8500 Power Reset | |
742 | and Control Management Unit. This is basically an autonomous | |
743 | system controller running an XP70 microprocessor, which is accessed | |
744 | through a register map. | |
745 | ||
f71e1afd AS |
746 | config MFD_CS5535 |
747 | tristate "Support for CS5535 and CS5536 southbridge core functions" | |
748 | select MFD_CORE | |
15b7cf14 | 749 | depends on PCI && X86 |
f71e1afd AS |
750 | ---help--- |
751 | This is the core driver for CS5535/CS5536 MFD functions. This is | |
752 | necessary for using the board's GPIO and MFGPT functionality. | |
753 | ||
8edbede9 RR |
754 | config MFD_TIMBERDALE |
755 | tristate "Support for the Timberdale FPGA" | |
756 | select MFD_CORE | |
546e29b6 | 757 | depends on PCI && GPIOLIB |
8edbede9 RR |
758 | ---help--- |
759 | This is the core driver for the timberdale FPGA. This device is a | |
760 | multifunction device which exposes numerous platform devices. | |
761 | ||
762 | The timberdale FPGA can be found on the Intel Atom development board | |
763 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
764 | |
765 | config LPC_SCH | |
766 | tristate "Intel SCH LPC" | |
767 | depends on PCI | |
768 | select MFD_CORE | |
769 | help | |
770 | LPC bridge function of the Intel SCH provides support for | |
771 | System Management Bus and General Purpose I/O. | |
772 | ||
4630b130 AS |
773 | config LPC_ICH |
774 | tristate "Intel ICH LPC" | |
775 | depends on PCI | |
776 | select MFD_CORE | |
777 | help | |
778 | The LPC bridge function of the Intel ICH provides support for | |
779 | many functional units. This driver provides needed support for | |
887c8ec7 AS |
780 | other drivers to control these functions, currently GPIO and |
781 | watchdog. | |
4630b130 | 782 | |
e090d506 FF |
783 | config MFD_RDC321X |
784 | tristate "Support for RDC-R321x southbridge" | |
785 | select MFD_CORE | |
786 | depends on PCI | |
787 | help | |
788 | Say yes here if you want to have support for the RDC R-321x SoC | |
789 | southbridge which provides access to GPIOs and Watchdog using the | |
790 | southbridge PCI device configuration space. | |
791 | ||
bd358132 IS |
792 | config MFD_JANZ_CMODIO |
793 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
794 | select MFD_CORE | |
795 | depends on PCI | |
796 | help | |
797 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
798 | carrier board. This device is a PCI to MODULbus bridge which may | |
799 | host many different types of MODULbus daughterboards, including | |
800 | CAN and GPIO controllers. | |
801 | ||
91f4debf | 802 | config MFD_JZ4740_ADC |
914e6d4e | 803 | bool "Support for the JZ4740 SoC ADC core" |
91f4debf | 804 | select MFD_CORE |
914e6d4e | 805 | select GENERIC_IRQ_CHIP |
91f4debf LPC |
806 | depends on MACH_JZ4740 |
807 | help | |
808 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. | |
809 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. | |
810 | ||
375fc77b DD |
811 | config MFD_VX855 |
812 | tristate "Support for VIA VX855/VX875 integrated south bridge" | |
813 | depends on PCI | |
814 | select MFD_CORE | |
815 | help | |
816 | Say yes here to enable support for various functions of the | |
817 | VIA VX855/VX875 south bridge. You will need to enable the vx855_spi | |
818 | and/or vx855_gpio drivers for this to do anything useful. | |
819 | ||
383268a8 | 820 | config MFD_WL1273_CORE |
94fd5b74 | 821 | tristate "Support for TI WL1273 FM radio." |
383268a8 MA |
822 | depends on I2C |
823 | select MFD_CORE | |
824 | default n | |
825 | help | |
826 | This is the core driver for the TI WL1273 FM radio. This MFD | |
827 | driver connects the radio-wl1273 V4L2 module and the wl1273 | |
828 | audio codec. | |
829 | ||
17cdd29d KM |
830 | config MFD_OMAP_USB_HOST |
831 | bool "Support OMAP USBHS core driver" | |
832 | depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 | |
833 | default y | |
834 | help | |
835 | This is the core driver for the OAMP EHCI and OHCI drivers. | |
836 | This MFD driver does the required setup functionalities for | |
837 | OMAP USB Host drivers. | |
838 | ||
cbdb53e1 AD |
839 | config MFD_PM8XXX |
840 | tristate | |
841 | ||
842 | config MFD_PM8921_CORE | |
843 | tristate "Qualcomm PM8921 PMIC chip" | |
844 | depends on MSM_SSBI | |
845 | select MFD_CORE | |
846 | select MFD_PM8XXX | |
847 | help | |
848 | If you say yes to this option, support will be included for the | |
849 | built-in PM8921 PMIC chip. | |
850 | ||
851 | This is required if your board has a PM8921 and uses its features, | |
852 | such as: MPPs, GPIOs, regulators, interrupts, and PWM. | |
853 | ||
854 | Say M here if you want to include support for PM8921 chip as a module. | |
855 | This will build a module called "pm8921-core". | |
856 | ||
c013f0a5 AD |
857 | config MFD_PM8XXX_IRQ |
858 | bool "Support for Qualcomm PM8xxx IRQ features" | |
859 | depends on MFD_PM8XXX | |
860 | default y if MFD_PM8XXX | |
861 | help | |
862 | This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. | |
863 | ||
864 | This is required to use certain other PM 8xxx features, such as GPIO | |
865 | and MPP. | |
866 | ||
8509e142 AL |
867 | config TPS65911_COMPARATOR |
868 | tristate | |
869 | ||
3c33be06 VB |
870 | config MFD_TPS65090 |
871 | bool "TPS65090 Power Management chips" | |
872 | depends on I2C=y && GENERIC_HARDIRQS | |
873 | select MFD_CORE | |
874 | select REGMAP_I2C | |
875 | help | |
876 | If you say yes here you get support for the TPS65090 series of | |
877 | Power Management chips. | |
878 | This driver provides common support for accessing the device, | |
879 | additional drivers must be enabled in order to use the | |
880 | functionality of the device. | |
881 | ||
09d6292b JP |
882 | config MFD_AAT2870_CORE |
883 | bool "Support for the AnalogicTech AAT2870" | |
884 | select MFD_CORE | |
885 | depends on I2C=y && GPIOLIB | |
886 | help | |
887 | If you say yes here you get support for the AAT2870. | |
888 | This driver provides common support for accessing the device, | |
889 | additional drivers must be enabled in order to use the | |
890 | functionality of the device. | |
891 | ||
1f5a371c MW |
892 | config MFD_INTEL_MSIC |
893 | bool "Support for Intel MSIC" | |
894 | depends on INTEL_SCU_IPC | |
895 | select MFD_CORE | |
896 | help | |
897 | Select this option to enable access to Intel MSIC (Avatele | |
898 | Passage) chip. This chip embeds audio, battery, GPIO, etc. | |
899 | devices used in Intel Medfield platforms. | |
900 | ||
1b1247dd LD |
901 | config MFD_RC5T583 |
902 | bool "Ricoh RC5T583 Power Management system device" | |
5364d0b8 | 903 | depends on I2C=y && GENERIC_HARDIRQS |
1b1247dd LD |
904 | select MFD_CORE |
905 | select REGMAP_I2C | |
906 | help | |
907 | Select this option to get support for the RICOH583 Power | |
908 | Management system device. | |
909 | This driver provides common support for accessing the device | |
910 | through i2c interface. The device supports multiple sub-devices | |
911 | like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. | |
912 | Additional drivers must be enabled in order to use the | |
913 | different functionality of the device. | |
914 | ||
35bdd290 AR |
915 | config MFD_STA2X11 |
916 | bool "STA2X11 multi function device support" | |
917 | depends on STA2X11 | |
918 | select MFD_CORE | |
919 | ||
75060a1d YCLP |
920 | config MFD_ANATOP |
921 | bool "Support for Freescale i.MX on-chip ANATOP controller" | |
922 | depends on SOC_IMX6Q | |
923 | help | |
924 | Select this option to enable Freescale i.MX on-chip ANATOP | |
925 | MFD controller. This controller embeds regulator and | |
926 | thermal devices for Freescale i.MX platforms. | |
927 | ||
c948ef3a GG |
928 | config MFD_PALMAS |
929 | bool "Support for the TI Palmas series chips" | |
930 | select MFD_CORE | |
931 | select REGMAP_I2C | |
932 | select REGMAP_IRQ | |
933 | depends on I2C=y | |
934 | help | |
935 | If you say yes here you get support for the Palmas | |
936 | series of PMIC chips from Texas Instruments. | |
937 | ||
8a0a8e8e AB |
938 | endmenu |
939 | endif | |
b6d6454f | 940 | |
a4e137ab | 941 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 942 | depends on ARCH_SA1100 |
a4e137ab RK |
943 | |
944 | config MCP | |
945 | tristate | |
946 | ||
5e742ad6 RK |
947 | # Interface drivers |
948 | config MCP_SA11X0 | |
949 | tristate "Support SA11x0 MCP interface" | |
950 | depends on ARCH_SA1100 | |
951 | select MCP | |
952 | ||
05c45ca9 RK |
953 | # Chip drivers |
954 | config MCP_UCB1200 | |
a3364409 RK |
955 | bool "Support for UCB1200 / UCB1300" |
956 | depends on MCP_SA11X0 | |
957 | select MCP | |
05c45ca9 | 958 | |
acb45439 RK |
959 | config MCP_UCB1200_TS |
960 | tristate "Touchscreen interface support" | |
961 | depends on MCP_UCB1200 && INPUT | |
962 | ||
a4e137ab | 963 | endmenu |