]>
Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
8a0a8e8e AB |
5 | if HAS_IOMEM |
6 | menu "Multifunction device drivers" | |
b6d6454f | 7 | |
aa613de6 DES |
8 | config MFD_CORE |
9 | tristate | |
c94bb233 | 10 | select IRQ_DOMAIN |
aa613de6 DES |
11 | default n |
12 | ||
2cc50bee HZ |
13 | config MFD_88PM860X |
14 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 15 | depends on I2C=y && GENERIC_HARDIRQS |
b46a36c0 | 16 | select REGMAP_I2C |
2cc50bee HZ |
17 | select MFD_CORE |
18 | help | |
19 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
20 | This includes the I2C driver and the core APIs _only_, you have to | |
21 | select individual components like voltage regulators, RTC and | |
22 | battery-charger under the corresponding menus. | |
23 | ||
70c6cce0 QZ |
24 | config MFD_88PM800 |
25 | tristate "Support Marvell 88PM800" | |
26 | depends on I2C=y && GENERIC_HARDIRQS | |
27 | select REGMAP_I2C | |
28 | select REGMAP_IRQ | |
29 | select MFD_CORE | |
30 | help | |
31 | This supports for Marvell 88PM800 Power Management IC. | |
32 | This includes the I2C driver and the core APIs _only_, you have to | |
33 | select individual components like voltage regulators, RTC and | |
34 | battery-charger under the corresponding menus. | |
35 | ||
36 | config MFD_88PM805 | |
37 | tristate "Support Marvell 88PM805" | |
38 | depends on I2C=y && GENERIC_HARDIRQS | |
39 | select REGMAP_I2C | |
40 | select REGMAP_IRQ | |
41 | select MFD_CORE | |
42 | help | |
43 | This supports for Marvell 88PM805 Power Management IC. This includes | |
44 | the I2C driver and the core APIs _only_, you have to select individual | |
45 | components like codec device, headset/Mic device under the | |
46 | corresponding menus. | |
47 | ||
b6d6454f BD |
48 | config MFD_SM501 |
49 | tristate "Support for Silicon Motion SM501" | |
50 | ---help--- | |
51 | This is the core driver for the Silicon Motion SM501 multimedia | |
52 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
53 | provide numerous interfaces including USB host controller, USB gadget, |
54 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
55 | interface. The device may be connected by PCI or local bus with |
56 | varying functions enabled. | |
57 | ||
f61be273 BD |
58 | config MFD_SM501_GPIO |
59 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 60 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
61 | ---help--- |
62 | This option uses the gpio library layer to export the 64 GPIO | |
63 | lines on the SM501. The platform data is used to supply the | |
64 | base number for the first GPIO line to register. | |
65 | ||
ada8a8a1 WW |
66 | config MFD_RTSX_PCI |
67 | tristate "Support for Realtek PCI-E card reader" | |
68 | depends on PCI | |
45e48aa6 | 69 | select MFD_CORE |
ada8a8a1 WW |
70 | help |
71 | This supports for Realtek PCI-Express card reader including rts5209, | |
72 | rts5229, rtl8411, etc. Realtek card reader supports access to many | |
73 | types of memory cards, such as Memory Stick, Memory Stick Pro, | |
74 | Secure Digital and MultiMediaCard. | |
75 | ||
fa9ff4b1 SO |
76 | config MFD_ASIC3 |
77 | bool "Support for Compaq ASIC3" | |
2eedd604 | 78 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 79 | select MFD_CORE |
fa9ff4b1 SO |
80 | ---help--- |
81 | This driver supports the ASIC3 multifunction chip found on many | |
82 | PDAs (mainly iPAQ and HTC based ones) | |
83 | ||
ca26308c MA |
84 | config MFD_DAVINCI_VOICECODEC |
85 | tristate | |
86 | select MFD_CORE | |
87 | ||
0931a4c6 DB |
88 | config MFD_DM355EVM_MSP |
89 | bool "DaVinci DM355 EVM microcontroller" | |
1819ebcf | 90 | depends on I2C=y && MACH_DAVINCI_DM355_EVM |
0931a4c6 DB |
91 | help |
92 | This driver supports the MSP430 microcontroller used on these | |
93 | boards. MSP430 firmware manages resets and power sequencing, | |
94 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
95 | ||
03df0f62 CC |
96 | config MFD_TI_SSP |
97 | tristate "TI Sequencer Serial Port support" | |
98 | depends on ARCH_DAVINCI_TNETV107X | |
99 | select MFD_CORE | |
100 | ---help--- | |
101 | Say Y here if you want support for the Sequencer Serial Port | |
102 | in a Texas Instruments TNETV107X SoC. | |
103 | ||
104 | To compile this driver as a module, choose M here: the | |
105 | module will be called ti-ssp. | |
106 | ||
01636eb9 PR |
107 | config MFD_TI_AM335X_TSCADC |
108 | tristate "TI ADC / Touch Screen chip support" | |
109 | select MFD_CORE | |
110 | select REGMAP | |
111 | select REGMAP_MMIO | |
112 | help | |
113 | If you say yes here you get support for Texas Instruments series | |
114 | of Touch Screen /ADC chips. | |
115 | To compile this driver as a module, choose M here: the | |
116 | module will be called ti_am335x_tscadc. | |
117 | ||
a1635b8f PZ |
118 | config HTC_EGPIO |
119 | bool "HTC EGPIO support" | |
7444a72e | 120 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
121 | help |
122 | This driver supports the CPLD egpio chip present on | |
123 | several HTC phones. It provides basic support for input | |
124 | pins, output pins, and irqs. | |
125 | ||
5dc3339a PZ |
126 | config HTC_PASIC3 |
127 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 128 | select MFD_CORE |
5dc3339a PZ |
129 | help |
130 | This core driver provides register access for the LED/DS1WM | |
131 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
132 | HTC Magician devices, respectively. Actual functionality is | |
133 | handled by the leds-pasic3 and ds1wm drivers. | |
134 | ||
6048a3dd CM |
135 | config HTC_I2CPLD |
136 | bool "HTC I2C PLD chip support" | |
bef3e20c | 137 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
138 | help |
139 | If you say yes here you get support for the supposed CPLD | |
140 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
141 | This device provides input and output GPIOs through an I2C | |
142 | interface to one or more sub-chips. | |
143 | ||
d9105c2b MV |
144 | config UCB1400_CORE |
145 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 146 | depends on AC97_BUS |
5a49a540 | 147 | depends on GPIOLIB |
d9105c2b MV |
148 | help |
149 | This enables support for the Philips UCB1400 core functions. | |
150 | The UCB1400 is an AC97 audio codec. | |
151 | ||
152 | To compile this driver as a module, choose M here: the | |
153 | module will be called ucb1400_core. | |
154 | ||
16c5c023 JH |
155 | config MFD_LM3533 |
156 | tristate "LM3533 Lighting Power chip" | |
157 | depends on I2C | |
158 | select MFD_CORE | |
159 | select REGMAP_I2C | |
160 | help | |
161 | Say yes here to enable support for National Semiconductor / TI | |
162 | LM3533 Lighting Power chips. | |
163 | ||
164 | This driver provides common support for accessing the device; | |
165 | additional drivers must be enabled in order to use the LED, | |
166 | backlight or ambient-light-sensor functionality of the device. | |
167 | ||
798a8eee LW |
168 | config TPS6105X |
169 | tristate "TPS61050/61052 Boost Converters" | |
170 | depends on I2C | |
2edd3b69 | 171 | select REGULATOR |
fc498fa2 | 172 | select MFD_CORE |
2edd3b69 | 173 | select REGULATOR_FIXED_VOLTAGE |
798a8eee LW |
174 | help |
175 | This option enables a driver for the TP61050/TPS61052 | |
176 | high-power "white LED driver". This boost converter is | |
177 | sometimes used for other things than white LEDs, and | |
178 | also contains a GPIO pin. | |
179 | ||
87c13493 DB |
180 | config TPS65010 |
181 | tristate "TPS6501x Power Management chips" | |
182 | depends on I2C && GPIOLIB | |
183 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
184 | help | |
185 | If you say yes here you get support for the TPS6501x series of | |
186 | Power Management chips. These include voltage regulators, | |
187 | lithium ion/polymer battery charging, and other features that | |
188 | are often used in portable devices like cell phones and cameras. | |
189 | ||
190 | This driver can also be built as a module. If so, the module | |
191 | will be called tps65010. | |
192 | ||
31dd6a26 TF |
193 | config TPS6507X |
194 | tristate "TPS6507x Power Management / Touch Screen chips" | |
195 | select MFD_CORE | |
196 | depends on I2C | |
197 | help | |
198 | If you say yes here you get support for the TPS6507x series of | |
199 | Power Management / Touch Screen chips. These include voltage | |
200 | regulators, lithium ion/polymer battery charging, touch screen | |
201 | and other features that are often used in portable devices. | |
202 | This driver can also be built as a module. If so, the module | |
203 | will be called tps6507x. | |
204 | ||
d48f411c AC |
205 | config MFD_TPS65217 |
206 | tristate "TPS65217 Power Management / White LED chips" | |
207 | depends on I2C | |
208 | select MFD_CORE | |
209 | select REGMAP_I2C | |
210 | help | |
211 | If you say yes here you get support for the TPS65217 series of | |
212 | Power Management / White LED chips. | |
213 | These include voltage regulators, lithium ion/polymer battery | |
214 | charger, wled and other features that are often used in portable | |
215 | devices. | |
216 | ||
217 | This driver can also be built as a module. If so, the module | |
218 | will be called tps65217. | |
219 | ||
37df003c AL |
220 | config MFD_TPS6586X |
221 | bool "TPS6586x Power Management chips" | |
7a7487cb | 222 | depends on I2C=y && GENERIC_HARDIRQS |
37df003c | 223 | select MFD_CORE |
1176b5be | 224 | select REGMAP_I2C |
b4410a89 | 225 | depends on REGULATOR |
37df003c AL |
226 | help |
227 | If you say yes here you get support for the TPS6586X series of | |
228 | Power Management chips. | |
229 | This driver provides common support for accessing the device, | |
230 | additional drivers must be enabled in order to use the | |
231 | functionality of the device. | |
232 | ||
233 | This driver can also be built as a module. If so, the module | |
234 | will be called tps6586x. | |
235 | ||
54f323b1 LW |
236 | config MFD_TPS65910 |
237 | bool "TPS65910 Power Management chip" | |
238 | depends on I2C=y && GPIOLIB | |
239 | select MFD_CORE | |
dc9913a0 | 240 | select REGMAP_I2C |
21f7541d | 241 | select IRQ_DOMAIN |
54f323b1 LW |
242 | help |
243 | if you say yes here you get support for the TPS65910 series of | |
244 | Power Management chips. | |
245 | ||
36e52873 | 246 | config MFD_TPS65912 |
5608801b | 247 | bool |
36e52873 MO |
248 | depends on GPIOLIB |
249 | ||
250 | config MFD_TPS65912_I2C | |
231dd9c8 | 251 | bool "TPS65912 Power Management chip with I2C" |
36e52873 MO |
252 | select MFD_CORE |
253 | select MFD_TPS65912 | |
254 | depends on I2C=y && GPIOLIB | |
255 | help | |
256 | If you say yes here you get support for the TPS65912 series of | |
257 | PM chips with I2C interface. | |
258 | ||
259 | config MFD_TPS65912_SPI | |
260 | bool "TPS65912 Power Management chip with SPI" | |
261 | select MFD_CORE | |
262 | select MFD_TPS65912 | |
263 | depends on SPI_MASTER && GPIOLIB | |
264 | help | |
265 | If you say yes here you get support for the TPS65912 series of | |
266 | PM chips with SPI interface. | |
267 | ||
edd7eabc LD |
268 | config MFD_TPS80031 |
269 | bool "TI TPS80031/TPS80032 Power Management chips" | |
270 | depends on I2C=y && GENERIC_HARDIRQS | |
271 | select MFD_CORE | |
272 | select REGMAP_I2C | |
273 | select IRQ_DOMAIN | |
274 | help | |
275 | If you say yes here you get support for the Texas Instruments | |
276 | TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
277 | Path and Battery Charger. The device provides five configurable | |
278 | step-down converters, 11 general purpose LDOs, USB OTG Module, | |
279 | ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with | |
280 | Power Path from USB, 32K clock generator. | |
281 | ||
88e75cc3 DB |
282 | config MENELAUS |
283 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 284 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
285 | help |
286 | If you say yes here you get support for the Texas Instruments | |
287 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 288 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
289 | and other features that are often used in portable devices like |
290 | cell phones and PDAs. | |
291 | ||
a603a7fa | 292 | config TWL4030_CORE |
e8deb28c | 293 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
6252547b | 294 | depends on I2C=y && GENERIC_HARDIRQS |
280ad7fd | 295 | select IRQ_DOMAIN |
a603a7fa | 296 | help |
e8deb28c | 297 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
298 | This core driver provides register access and IRQ handling |
299 | facilities, and registers devices for the various functions | |
300 | so that function-specific drivers can bind to them. | |
301 | ||
302 | These multi-function chips are found on many OMAP2 and OMAP3 | |
303 | boards, providing power management, RTC, GPIO, keypad, a | |
304 | high speed USB OTG transceiver, an audio codec (on most | |
305 | versions) and many other features. | |
306 | ||
f99c1d4f K |
307 | config TWL4030_MADC |
308 | tristate "Texas Instruments TWL4030 MADC" | |
309 | depends on TWL4030_CORE | |
310 | help | |
311 | This driver provides support for triton TWL4030-MADC. The | |
312 | driver supports both RT and SW conversion methods. | |
313 | ||
314 | This driver can be built as a module. If so it will be | |
315 | named twl4030-madc | |
316 | ||
ebf0bd36 AK |
317 | config TWL4030_POWER |
318 | bool "Support power resources on TWL4030 family chips" | |
319 | depends on TWL4030_CORE && ARM | |
320 | help | |
321 | Say yes here if you want to use the power resources on the | |
322 | TWL4030 family chips. Most of these resources are regulators, | |
323 | which have a separate driver; some are control signals, such | |
324 | as clock request handshaking. | |
325 | ||
326 | This driver uses board-specific data to initialize the resources | |
25985edc | 327 | and load scripts controlling which resources are switched off/on |
ebf0bd36 AK |
328 | or reset when a sleep, wakeup or warm reset event occurs. |
329 | ||
57fe7251 | 330 | config MFD_TWL4030_AUDIO |
0b83ddeb PU |
331 | bool |
332 | depends on TWL4030_CORE | |
333 | select MFD_CORE | |
334 | default n | |
335 | ||
f19b2823 | 336 | config TWL6040_CORE |
8eaeb939 | 337 | bool "Support for TWL6040 audio codec" |
ab7edb14 | 338 | depends on I2C=y |
f19b2823 | 339 | select MFD_CORE |
8eaeb939 | 340 | select REGMAP_I2C |
ab7edb14 | 341 | select REGMAP_IRQ |
f19b2823 | 342 | default n |
8eaeb939 PU |
343 | help |
344 | Say yes here if you want support for Texas Instruments TWL6040 audio | |
345 | codec. | |
346 | This driver provides common support for accessing the device, | |
347 | additional drivers must be enabled in order to use the | |
348 | functionality of the device (audio, vibra). | |
f19b2823 | 349 | |
27e34995 RV |
350 | config MFD_STMPE |
351 | bool "Support STMicroelectronics STMPE" | |
e789995d | 352 | depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS |
27e34995 RV |
353 | select MFD_CORE |
354 | help | |
355 | Support for the STMPE family of I/O Expanders from | |
356 | STMicroelectronics. | |
357 | ||
358 | Currently supported devices are: | |
359 | ||
360 | STMPE811: GPIO, Touchscreen | |
361 | STMPE1601: GPIO, Keypad | |
362 | STMPE2401: GPIO, Keypad | |
363 | STMPE2403: GPIO, Keypad | |
364 | ||
365 | This driver provides common support for accessing the device, | |
366 | additional drivers must be enabled in order to use the functionality | |
367 | of the device. Currently available sub drivers are: | |
368 | ||
369 | GPIO: stmpe-gpio | |
370 | Keypad: stmpe-keypad | |
371 | Touchscreen: stmpe-ts | |
372 | ||
1a6e4b74 VK |
373 | menu "STMPE Interface Drivers" |
374 | depends on MFD_STMPE | |
375 | ||
376 | config STMPE_I2C | |
377 | bool "STMPE I2C Inteface" | |
eedea80f | 378 | depends on I2C=y |
1a6e4b74 VK |
379 | default y |
380 | help | |
381 | This is used to enable I2C interface of STMPE | |
e789995d VK |
382 | |
383 | config STMPE_SPI | |
384 | bool "STMPE SPI Inteface" | |
385 | depends on SPI_MASTER | |
386 | help | |
387 | This is used to enable SPI interface of STMPE | |
1a6e4b74 VK |
388 | endmenu |
389 | ||
f4e8afdc SI |
390 | config MFD_TC3589X |
391 | bool "Support Toshiba TC35892 and variants" | |
b4ecd326 RV |
392 | depends on I2C=y && GENERIC_HARDIRQS |
393 | select MFD_CORE | |
394 | help | |
f4e8afdc | 395 | Support for the Toshiba TC35892 and variants I/O Expander. |
b4ecd326 RV |
396 | |
397 | This driver provides common support for accessing the device, | |
398 | additional drivers must be enabled in order to use the | |
399 | functionality of the device. | |
400 | ||
1c2c30ac SO |
401 | config MFD_TMIO |
402 | bool | |
403 | default n | |
404 | ||
1f192015 IM |
405 | config MFD_T7L66XB |
406 | bool "Support Toshiba T7L66XB" | |
9ca68233 | 407 | depends on ARM && HAVE_CLK |
1f192015 | 408 | select MFD_CORE |
1c2c30ac | 409 | select MFD_TMIO |
1f192015 IM |
410 | help |
411 | Support for Toshiba Mobile IO Controller T7L66XB | |
412 | ||
8284328c SP |
413 | config MFD_SMSC |
414 | bool "Support for the SMSC ECE1099 series chips" | |
415 | depends on I2C=y | |
416 | select MFD_CORE | |
417 | select REGMAP_I2C | |
418 | help | |
419 | If you say yes here you get support for the | |
420 | ece1099 chips from SMSC. | |
421 | ||
422 | To compile this driver as a module, choose M here: the | |
423 | module will be called smsc. | |
424 | ||
cbdfb426 IM |
425 | config MFD_TC6387XB |
426 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 427 | depends on ARM && HAVE_CLK |
cbdfb426 | 428 | select MFD_CORE |
1c2c30ac | 429 | select MFD_TMIO |
cbdfb426 IM |
430 | help |
431 | Support for Toshiba Mobile IO Controller TC6387XB | |
432 | ||
d6315949 DES |
433 | config MFD_TC6393XB |
434 | bool "Support Toshiba TC6393XB" | |
8f057d7b GR |
435 | depends on ARM && HAVE_CLK |
436 | select GPIOLIB | |
f024ff10 | 437 | select MFD_CORE |
1c2c30ac | 438 | select MFD_TMIO |
d6315949 DES |
439 | help |
440 | Support for Toshiba Mobile IO Controller TC6393XB | |
441 | ||
8e2eaabf SO |
442 | config PMIC_DA903X |
443 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
444 | depends on I2C=y | |
445 | help | |
446 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
447 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
448 | usually found on PXA processors-based platforms. This includes | |
449 | the I2C driver and the core APIs _only_, you have to select | |
450 | individual components like LCD backlight, voltage regulators, | |
451 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b | 452 | |
84c99db8 AJ |
453 | config PMIC_DA9052 |
454 | bool | |
455 | select MFD_CORE | |
456 | ||
cfe04478 AJ |
457 | config MFD_DA9052_SPI |
458 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI" | |
459 | select REGMAP_SPI | |
460 | select REGMAP_IRQ | |
461 | select PMIC_DA9052 | |
462 | depends on SPI_MASTER=y | |
463 | help | |
464 | Support for the Dialog Semiconductor DA9052 PMIC | |
465 | when controlled using SPI. This driver provides common support | |
466 | for accessing the device, additional drivers must be enabled in | |
467 | order to use the functionality of the device. | |
468 | ||
84c99db8 AJ |
469 | config MFD_DA9052_I2C |
470 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C" | |
471 | select REGMAP_I2C | |
472 | select REGMAP_IRQ | |
473 | select PMIC_DA9052 | |
474 | depends on I2C=y | |
475 | help | |
476 | Support for the Dialog Semiconductor DA9052 PMIC | |
477 | when controlled using I2C. This driver provides common support | |
478 | for accessing the device, additional drivers must be enabled in | |
479 | order to use the functionality of the device. | |
480 | ||
2896434c AJ |
481 | config MFD_DA9055 |
482 | bool "Dialog Semiconductor DA9055 PMIC Support" | |
483 | select REGMAP_I2C | |
484 | select REGMAP_IRQ | |
485 | select PMIC_DA9055 | |
486 | select MFD_CORE | |
487 | depends on I2C=y | |
488 | help | |
489 | Say yes here for support of Dialog Semiconductor DA9055. This is | |
490 | a Power Management IC. This driver provides common support for | |
491 | accessing the device as well as the I2C interface to the chip itself. | |
492 | Additional drivers must be enabled in order to use the functionality | |
493 | of the device. | |
494 | ||
495 | This driver can be built as a module. If built as a module it will be | |
496 | called "da9055" | |
497 | ||
a5736e0b MH |
498 | config PMIC_ADP5520 |
499 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
500 | depends on I2C=y | |
501 | help | |
502 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
503 | Multifunction Power Management IC. This includes | |
504 | the I2C driver and the core APIs _only_, you have to select | |
505 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
506 | under the corresponding menus. | |
8e2eaabf | 507 | |
eea6b7cc MK |
508 | config MFD_LP8788 |
509 | bool "Texas Instruments LP8788 Power Management Unit Driver" | |
510 | depends on I2C=y | |
511 | select MFD_CORE | |
512 | select REGMAP_I2C | |
513 | select IRQ_DOMAIN | |
514 | help | |
515 | TI LP8788 PMU supports regulators, battery charger, RTC, | |
516 | ADC, backlight driver and current sinks. | |
517 | ||
dae8a969 JL |
518 | config MFD_MAX77686 |
519 | bool "Maxim Semiconductor MAX77686 PMIC Support" | |
520 | depends on I2C=y && GENERIC_HARDIRQS | |
521 | select MFD_CORE | |
522 | select REGMAP_I2C | |
523 | select IRQ_DOMAIN | |
524 | help | |
525 | Say yes here to support for Maxim Semiconductor MAX77686. | |
526 | This is a Power Management IC with RTC on chip. | |
527 | This driver provides common support for accessing the device; | |
528 | additional drivers must be enabled in order to use the functionality | |
529 | of the device. | |
530 | ||
83871c00 CC |
531 | config MFD_MAX77693 |
532 | bool "Maxim Semiconductor MAX77693 PMIC Support" | |
533 | depends on I2C=y && GENERIC_HARDIRQS | |
534 | select MFD_CORE | |
29f772d4 | 535 | select REGMAP_I2C |
83871c00 CC |
536 | help |
537 | Say yes here to support for Maxim Semiconductor MAX77693. | |
538 | This is a companion Power Management IC with Flash, Haptic, Charger, | |
539 | and MUIC(Micro USB Interface Controller) controls on chip. | |
540 | This driver provides common support for accessing the device; | |
541 | additional drivers must be enabled in order to use the functionality | |
542 | of the device. | |
543 | ||
a91d2f8d GY |
544 | config MFD_MAX8907 |
545 | tristate "Maxim Semiconductor MAX8907 PMIC Support" | |
546 | select MFD_CORE | |
547 | depends on I2C=y && GENERIC_HARDIRQS | |
548 | select REGMAP_I2C | |
549 | select REGMAP_IRQ | |
550 | help | |
551 | Say yes here to support for Maxim Semiconductor MAX8907. This is | |
552 | a Power Management IC. This driver provides common support for | |
553 | accessing the device; additional drivers must be enabled in order | |
554 | to use the functionality of the device. | |
555 | ||
d50f8f33 | 556 | config MFD_MAX8925 |
1f1cf8f9 | 557 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 558 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 559 | select MFD_CORE |
d50f8f33 HZ |
560 | help |
561 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
6b2aac42 | 562 | a Power Management IC. This driver provides common support for |
d50f8f33 HZ |
563 | accessing the device, additional drivers must be enabled in order |
564 | to use the functionality of the device. | |
565 | ||
527e7e9a MH |
566 | config MFD_MAX8997 |
567 | bool "Maxim Semiconductor MAX8997/8966 PMIC Support" | |
568 | depends on I2C=y && GENERIC_HARDIRQS | |
569 | select MFD_CORE | |
b41511f7 | 570 | select IRQ_DOMAIN |
527e7e9a | 571 | help |
5a924d13 | 572 | Say yes here to support for Maxim Semiconductor MAX8997/8966. |
527e7e9a MH |
573 | This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, |
574 | MUIC controls on chip. | |
d7e8c01a | 575 | This driver provides common support for accessing the device; |
527e7e9a MH |
576 | additional drivers must be enabled in order to use the functionality |
577 | of the device. | |
578 | ||
156f2528 | 579 | config MFD_MAX8998 |
f8539ddc | 580 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
2c7e6f57 | 581 | depends on I2C=y && GENERIC_HARDIRQS |
156f2528 KP |
582 | select MFD_CORE |
583 | help | |
f8539ddc KP |
584 | Say yes here to support for Maxim Semiconductor MAX8998 and |
585 | National Semiconductor LP3974. This is a Power Management IC. | |
6b2aac42 | 586 | This driver provides common support for accessing the device, |
f8539ddc KP |
587 | additional drivers must be enabled in order to use the functionality |
588 | of the device. | |
156f2528 | 589 | |
66c9fbb9 SK |
590 | config MFD_SEC_CORE |
591 | bool "SAMSUNG Electronics PMIC Series Support" | |
c3d4d697 SK |
592 | depends on I2C=y && GENERIC_HARDIRQS |
593 | select MFD_CORE | |
594 | select REGMAP_I2C | |
6445b84a | 595 | select REGMAP_IRQ |
c3d4d697 | 596 | help |
66c9fbb9 | 597 | Support for the Samsung Electronics MFD series. |
6b2aac42 | 598 | This driver provides common support for accessing the device, |
c3d4d697 SK |
599 | additional drivers must be enabled in order to use the functionality |
600 | of the device | |
601 | ||
3afbac95 | 602 | config MFD_ARIZONA |
14b5bd5c | 603 | select REGMAP |
78948c17 | 604 | select REGMAP_IRQ |
c481c048 | 605 | select MFD_CORE |
49003a68 | 606 | bool |
3afbac95 MB |
607 | |
608 | config MFD_ARIZONA_I2C | |
609 | tristate "Support Wolfson Microelectronics Arizona platform with I2C" | |
610 | select MFD_ARIZONA | |
611 | select MFD_CORE | |
612 | select REGMAP_I2C | |
613 | depends on I2C | |
614 | help | |
615 | Support for the Wolfson Microelectronics Arizona platform audio SoC | |
616 | core functionality controlled via I2C. | |
617 | ||
618 | config MFD_ARIZONA_SPI | |
619 | tristate "Support Wolfson Microelectronics Arizona platform with SPI" | |
620 | select MFD_ARIZONA | |
621 | select MFD_CORE | |
622 | select REGMAP_SPI | |
623 | depends on SPI_MASTER | |
624 | help | |
625 | Support for the Wolfson Microelectronics Arizona platform audio SoC | |
626 | core functionality controlled via I2C. | |
627 | ||
628 | config MFD_WM5102 | |
629 | bool "Support Wolfson Microelectronics WM5102" | |
630 | depends on MFD_ARIZONA | |
631 | help | |
632 | Support for Wolfson Microelectronics WM5102 low power audio SoC | |
633 | ||
e102befe MB |
634 | config MFD_WM5110 |
635 | bool "Support Wolfson Microelectronics WM5110" | |
636 | depends on MFD_ARIZONA | |
637 | help | |
638 | Support for Wolfson Microelectronics WM5110 low power audio SoC | |
639 | ||
1d9f9f04 | 640 | config MFD_WM8400 |
eee0e4b4 | 641 | bool "Support Wolfson Microelectronics WM8400" |
b8380c1a | 642 | select MFD_CORE |
08b4c118 | 643 | depends on I2C=y |
2b247d06 | 644 | select REGMAP_I2C |
1d9f9f04 MB |
645 | help |
646 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 647 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
648 | the device, additional drivers must be enabled in order to use |
649 | the functionality of the device. | |
650 | ||
b11062b9 | 651 | config MFD_WM831X |
e5b48684 MB |
652 | bool |
653 | depends on GENERIC_HARDIRQS | |
654 | ||
655 | config MFD_WM831X_I2C | |
656 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C" | |
b11062b9 | 657 | select MFD_CORE |
e5b48684 | 658 | select MFD_WM831X |
1df5981b | 659 | select REGMAP_I2C |
cd99758b | 660 | select IRQ_DOMAIN |
8d002bdc | 661 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 662 | help |
e5b48684 MB |
663 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
664 | when controlled using I2C. This driver provides common support | |
665 | for accessing the device, additional drivers must be enabled in | |
666 | order to use the functionality of the device. | |
b11062b9 | 667 | |
2aa13b9e MB |
668 | config MFD_WM831X_SPI |
669 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI" | |
670 | select MFD_CORE | |
671 | select MFD_WM831X | |
1df5981b | 672 | select REGMAP_SPI |
cd99758b | 673 | select IRQ_DOMAIN |
2aa13b9e MB |
674 | depends on SPI_MASTER && GENERIC_HARDIRQS |
675 | help | |
676 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs | |
677 | when controlled using SPI. This driver provides common support | |
678 | for accessing the device, additional drivers must be enabled in | |
679 | order to use the functionality of the device. | |
680 | ||
89b4012b | 681 | config MFD_WM8350 |
ecf926bc | 682 | bool |
8d002bdc | 683 | depends on GENERIC_HARDIRQS |
89b4012b MB |
684 | |
685 | config MFD_WM8350_CONFIG_MODE_0 | |
686 | bool | |
687 | depends on MFD_WM8350 | |
688 | ||
689 | config MFD_WM8350_CONFIG_MODE_1 | |
690 | bool | |
691 | depends on MFD_WM8350 | |
692 | ||
693 | config MFD_WM8350_CONFIG_MODE_2 | |
694 | bool | |
695 | depends on MFD_WM8350 | |
696 | ||
697 | config MFD_WM8350_CONFIG_MODE_3 | |
698 | bool | |
699 | depends on MFD_WM8350 | |
700 | ||
ca23f8c1 MB |
701 | config MFD_WM8351_CONFIG_MODE_0 |
702 | bool | |
703 | depends on MFD_WM8350 | |
704 | ||
705 | config MFD_WM8351_CONFIG_MODE_1 | |
706 | bool | |
707 | depends on MFD_WM8350 | |
708 | ||
709 | config MFD_WM8351_CONFIG_MODE_2 | |
710 | bool | |
711 | depends on MFD_WM8350 | |
712 | ||
713 | config MFD_WM8351_CONFIG_MODE_3 | |
714 | bool | |
715 | depends on MFD_WM8350 | |
716 | ||
96920630 MB |
717 | config MFD_WM8352_CONFIG_MODE_0 |
718 | bool | |
719 | depends on MFD_WM8350 | |
720 | ||
721 | config MFD_WM8352_CONFIG_MODE_1 | |
722 | bool | |
723 | depends on MFD_WM8350 | |
724 | ||
725 | config MFD_WM8352_CONFIG_MODE_2 | |
726 | bool | |
727 | depends on MFD_WM8350 | |
728 | ||
729 | config MFD_WM8352_CONFIG_MODE_3 | |
730 | bool | |
731 | depends on MFD_WM8350 | |
732 | ||
c661a0b9 | 733 | config MFD_WM8350_I2C |
ecf926bc | 734 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 735 | select MFD_WM8350 |
8d002bdc | 736 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
737 | help |
738 | The WM8350 is an integrated audio and power management | |
739 | subsystem with watchdog and RTC functionality for embedded | |
740 | systems. This option enables core support for the WM8350 with | |
741 | I2C as the control interface. Additional options must be | |
742 | selected to enable support for the functionality of the chip. | |
743 | ||
9e501086 | 744 | config MFD_WM8994 |
c9fbf7e0 | 745 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 746 | select MFD_CORE |
d6c645fc | 747 | select REGMAP_I2C |
8ab30691 | 748 | select REGMAP_IRQ |
c9fbf7e0 | 749 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
750 | help |
751 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
752 | smartphone applicatiosn. As well as audio functionality it | |
753 | has on board GPIO and regulator functionality which is | |
754 | supported via the relevant subsystems. This driver provides | |
755 | core support for the WM8994, in order to use the actual | |
756 | functionaltiy of the device other drivers must be enabled. | |
757 | ||
f52046b1 BR |
758 | config MFD_PCF50633 |
759 | tristate "Support for NXP PCF50633" | |
760 | depends on I2C | |
6e3ad118 | 761 | select REGMAP_I2C |
f52046b1 BR |
762 | help |
763 | Say yes here if you have NXP PCF50633 chip on your board. | |
764 | This core driver provides register access and IRQ handling | |
765 | facilities, and registers devices for the various functions | |
766 | so that function-specific drivers can bind to them. | |
767 | ||
1305134e AL |
768 | config PCF50633_ADC |
769 | tristate "Support for NXP PCF50633 ADC" | |
770 | depends on MFD_PCF50633 | |
771 | help | |
772 | Say yes here if you want to include support for ADC in the | |
773 | NXP PCF50633 chip. | |
774 | ||
775 | config PCF50633_GPIO | |
776 | tristate "Support for NXP PCF50633 GPIO" | |
777 | depends on MFD_PCF50633 | |
778 | help | |
779 | Say yes here if you want to include support GPIO for pins on | |
780 | the PCF50633 chip. | |
781 | ||
8238addc | 782 | config MFD_MC13783 |
8e005935 UKK |
783 | tristate |
784 | ||
785 | config MFD_MC13XXX | |
1cb3642a | 786 | tristate |
df3df646 | 787 | depends on SPI_MASTER || I2C |
8238addc | 788 | select MFD_CORE |
8e005935 | 789 | select MFD_MC13783 |
8238addc | 790 | help |
a0c7c1d4 MR |
791 | Enable support for the Freescale MC13783 and MC13892 PMICs. |
792 | This driver provides common support for accessing the device, | |
8238addc SH |
793 | additional drivers must be enabled in order to use the |
794 | functionality of the device. | |
795 | ||
a0c7c1d4 | 796 | config MFD_MC13XXX_SPI |
1cb3642a MB |
797 | tristate "Freescale MC13783 and MC13892 SPI interface" |
798 | depends on SPI_MASTER | |
a0c7c1d4 | 799 | select REGMAP_SPI |
1cb3642a | 800 | select MFD_MC13XXX |
a0c7c1d4 MR |
801 | help |
802 | Select this if your MC13xxx is connected via an SPI bus. | |
803 | ||
df3df646 | 804 | config MFD_MC13XXX_I2C |
1cb3642a MB |
805 | tristate "Freescale MC13892 I2C interface" |
806 | depends on I2C | |
df3df646 | 807 | select REGMAP_I2C |
1cb3642a | 808 | select MFD_MC13XXX |
df3df646 MR |
809 | help |
810 | Select this if your MC13xxx is connected via an I2C bus. | |
811 | ||
fa661258 MW |
812 | config ABX500_CORE |
813 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" | |
47c16975 | 814 | default y if ARCH_U300 || ARCH_U8500 |
fa661258 MW |
815 | help |
816 | Say yes here if you have the ABX500 Mixed Signal IC family | |
817 | chips. This core driver expose register access functions. | |
818 | Functionality specific drivers using these functions can | |
819 | remain unchanged when IC changes. Binding of the functions to | |
820 | actual register access is done by the IC core driver. | |
821 | ||
14fa5691 | 822 | config AB3100_CORE |
2071db48 | 823 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
fa661258 | 824 | depends on I2C=y && ABX500_CORE |
8c96aefb | 825 | select MFD_CORE |
14fa5691 LW |
826 | default y if ARCH_U300 |
827 | help | |
828 | Select this to enable the AB3100 Mixed Signal IC core | |
829 | functionality. This connects to a AB3100 on the I2C bus | |
830 | and expose a number of symbols needed for dependent devices | |
831 | to read and write registers and subscribe to events from | |
832 | this multi-functional IC. This is needed to use other features | |
833 | of the AB3100 such as battery-backed RTC, charging control, | |
834 | LEDs, vibrator, system power and temperature, power management | |
835 | and ALSA sound. | |
836 | ||
12992dd8 LW |
837 | config AB3100_OTP |
838 | tristate "ST-Ericsson AB3100 OTP functions" | |
839 | depends on AB3100_CORE | |
840 | default y if AB3100_CORE | |
841 | help | |
842 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
843 | programmable memory) support. This exposes a sysfs file to read | |
844 | out OTP values. | |
845 | ||
13a09f93 DR |
846 | config EZX_PCAP |
847 | bool "PCAP Support" | |
848 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
849 | help | |
850 | This enables the PCAP ASIC present on EZX Phones. This is | |
851 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
852 | ||
62579266 RV |
853 | config AB8500_CORE |
854 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" | |
21f082a6 | 855 | depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU |
62579266 | 856 | select MFD_CORE |
06e589ef | 857 | select IRQ_DOMAIN |
0c41839e | 858 | help |
62579266 | 859 | Select this option to enable access to AB8500 power management |
6680d940 SI |
860 | chip. This connects to U8500 either on the SSP/SPI bus (deprecated |
861 | since hardware version v1.0) or the I2C bus via PRCMU. It also adds | |
862 | the irq_chip parts for handling the Mixed Signal chip events. | |
0c41839e SK |
863 | This chip embeds various other multimedia funtionalities as well. |
864 | ||
5814fc35 MW |
865 | config AB8500_DEBUG |
866 | bool "Enable debug info via debugfs" | |
867 | depends on AB8500_CORE && DEBUG_FS | |
868 | default y if DEBUG_FS | |
869 | help | |
870 | Select this option if you want debug information using the debug | |
871 | filesystem, debugfs. | |
dae2db30 AM |
872 | |
873 | config AB8500_GPADC | |
874 | bool "AB8500 GPADC driver" | |
875 | depends on AB8500_CORE && REGULATOR_AB8500 | |
876 | default y | |
877 | help | |
878 | AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage | |
5814fc35 | 879 | |
650c2a21 LW |
880 | config MFD_DB8500_PRCMU |
881 | bool "ST-Ericsson DB8500 Power Reset Control Management Unit" | |
882 | depends on UX500_SOC_DB8500 | |
883 | select MFD_CORE | |
884 | help | |
885 | Select this option to enable support for the DB8500 Power Reset | |
886 | and Control Management Unit. This is basically an autonomous | |
887 | system controller running an XP70 microprocessor, which is accessed | |
888 | through a register map. | |
889 | ||
f71e1afd AS |
890 | config MFD_CS5535 |
891 | tristate "Support for CS5535 and CS5536 southbridge core functions" | |
892 | select MFD_CORE | |
15b7cf14 | 893 | depends on PCI && X86 |
f71e1afd AS |
894 | ---help--- |
895 | This is the core driver for CS5535/CS5536 MFD functions. This is | |
896 | necessary for using the board's GPIO and MFGPT functionality. | |
897 | ||
8edbede9 RR |
898 | config MFD_TIMBERDALE |
899 | tristate "Support for the Timberdale FPGA" | |
900 | select MFD_CORE | |
546e29b6 | 901 | depends on PCI && GPIOLIB |
8edbede9 RR |
902 | ---help--- |
903 | This is the core driver for the timberdale FPGA. This device is a | |
904 | multifunction device which exposes numerous platform devices. | |
905 | ||
906 | The timberdale FPGA can be found on the Intel Atom development board | |
907 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
908 | |
909 | config LPC_SCH | |
910 | tristate "Intel SCH LPC" | |
911 | depends on PCI | |
912 | select MFD_CORE | |
913 | help | |
914 | LPC bridge function of the Intel SCH provides support for | |
915 | System Management Bus and General Purpose I/O. | |
916 | ||
4630b130 AS |
917 | config LPC_ICH |
918 | tristate "Intel ICH LPC" | |
919 | depends on PCI | |
920 | select MFD_CORE | |
921 | help | |
922 | The LPC bridge function of the Intel ICH provides support for | |
923 | many functional units. This driver provides needed support for | |
887c8ec7 AS |
924 | other drivers to control these functions, currently GPIO and |
925 | watchdog. | |
4630b130 | 926 | |
e090d506 FF |
927 | config MFD_RDC321X |
928 | tristate "Support for RDC-R321x southbridge" | |
929 | select MFD_CORE | |
930 | depends on PCI | |
931 | help | |
932 | Say yes here if you want to have support for the RDC R-321x SoC | |
933 | southbridge which provides access to GPIOs and Watchdog using the | |
934 | southbridge PCI device configuration space. | |
935 | ||
bd358132 IS |
936 | config MFD_JANZ_CMODIO |
937 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
938 | select MFD_CORE | |
939 | depends on PCI | |
940 | help | |
941 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
942 | carrier board. This device is a PCI to MODULbus bridge which may | |
943 | host many different types of MODULbus daughterboards, including | |
944 | CAN and GPIO controllers. | |
945 | ||
91f4debf | 946 | config MFD_JZ4740_ADC |
914e6d4e | 947 | bool "Support for the JZ4740 SoC ADC core" |
91f4debf | 948 | select MFD_CORE |
914e6d4e | 949 | select GENERIC_IRQ_CHIP |
91f4debf LPC |
950 | depends on MACH_JZ4740 |
951 | help | |
952 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. | |
953 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. | |
954 | ||
375fc77b DD |
955 | config MFD_VX855 |
956 | tristate "Support for VIA VX855/VX875 integrated south bridge" | |
957 | depends on PCI | |
958 | select MFD_CORE | |
959 | help | |
960 | Say yes here to enable support for various functions of the | |
961 | VIA VX855/VX875 south bridge. You will need to enable the vx855_spi | |
962 | and/or vx855_gpio drivers for this to do anything useful. | |
963 | ||
383268a8 | 964 | config MFD_WL1273_CORE |
94fd5b74 | 965 | tristate "Support for TI WL1273 FM radio." |
383268a8 MA |
966 | depends on I2C |
967 | select MFD_CORE | |
968 | default n | |
969 | help | |
970 | This is the core driver for the TI WL1273 FM radio. This MFD | |
971 | driver connects the radio-wl1273 V4L2 module and the wl1273 | |
972 | audio codec. | |
973 | ||
17cdd29d | 974 | config MFD_OMAP_USB_HOST |
16fa3dc7 | 975 | bool "Support OMAP USBHS core and TLL driver" |
17cdd29d KM |
976 | depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 |
977 | default y | |
978 | help | |
979 | This is the core driver for the OAMP EHCI and OHCI drivers. | |
980 | This MFD driver does the required setup functionalities for | |
981 | OMAP USB Host drivers. | |
982 | ||
cbdb53e1 AD |
983 | config MFD_PM8XXX |
984 | tristate | |
985 | ||
986 | config MFD_PM8921_CORE | |
987 | tristate "Qualcomm PM8921 PMIC chip" | |
988 | depends on MSM_SSBI | |
989 | select MFD_CORE | |
990 | select MFD_PM8XXX | |
991 | help | |
992 | If you say yes to this option, support will be included for the | |
993 | built-in PM8921 PMIC chip. | |
994 | ||
995 | This is required if your board has a PM8921 and uses its features, | |
996 | such as: MPPs, GPIOs, regulators, interrupts, and PWM. | |
997 | ||
998 | Say M here if you want to include support for PM8921 chip as a module. | |
999 | This will build a module called "pm8921-core". | |
1000 | ||
c013f0a5 AD |
1001 | config MFD_PM8XXX_IRQ |
1002 | bool "Support for Qualcomm PM8xxx IRQ features" | |
1003 | depends on MFD_PM8XXX | |
1004 | default y if MFD_PM8XXX | |
1005 | help | |
1006 | This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. | |
1007 | ||
1008 | This is required to use certain other PM 8xxx features, such as GPIO | |
1009 | and MPP. | |
1010 | ||
8509e142 AL |
1011 | config TPS65911_COMPARATOR |
1012 | tristate | |
1013 | ||
3c33be06 VB |
1014 | config MFD_TPS65090 |
1015 | bool "TPS65090 Power Management chips" | |
1016 | depends on I2C=y && GENERIC_HARDIRQS | |
1017 | select MFD_CORE | |
1018 | select REGMAP_I2C | |
1019 | help | |
1020 | If you say yes here you get support for the TPS65090 series of | |
1021 | Power Management chips. | |
1022 | This driver provides common support for accessing the device, | |
1023 | additional drivers must be enabled in order to use the | |
1024 | functionality of the device. | |
1025 | ||
09d6292b JP |
1026 | config MFD_AAT2870_CORE |
1027 | bool "Support for the AnalogicTech AAT2870" | |
1028 | select MFD_CORE | |
1029 | depends on I2C=y && GPIOLIB | |
1030 | help | |
1031 | If you say yes here you get support for the AAT2870. | |
1032 | This driver provides common support for accessing the device, | |
1033 | additional drivers must be enabled in order to use the | |
1034 | functionality of the device. | |
1035 | ||
1f5a371c MW |
1036 | config MFD_INTEL_MSIC |
1037 | bool "Support for Intel MSIC" | |
1038 | depends on INTEL_SCU_IPC | |
1039 | select MFD_CORE | |
1040 | help | |
1041 | Select this option to enable access to Intel MSIC (Avatele | |
1042 | Passage) chip. This chip embeds audio, battery, GPIO, etc. | |
1043 | devices used in Intel Medfield platforms. | |
1044 | ||
1b1247dd LD |
1045 | config MFD_RC5T583 |
1046 | bool "Ricoh RC5T583 Power Management system device" | |
5364d0b8 | 1047 | depends on I2C=y && GENERIC_HARDIRQS |
1b1247dd LD |
1048 | select MFD_CORE |
1049 | select REGMAP_I2C | |
1050 | help | |
1051 | Select this option to get support for the RICOH583 Power | |
1052 | Management system device. | |
1053 | This driver provides common support for accessing the device | |
1054 | through i2c interface. The device supports multiple sub-devices | |
1055 | like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. | |
1056 | Additional drivers must be enabled in order to use the | |
1057 | different functionality of the device. | |
1058 | ||
35bdd290 AR |
1059 | config MFD_STA2X11 |
1060 | bool "STA2X11 multi function device support" | |
1061 | depends on STA2X11 | |
1062 | select MFD_CORE | |
d94e2553 | 1063 | select REGMAP_MMIO |
35bdd290 | 1064 | |
87d68730 DA |
1065 | config MFD_SYSCON |
1066 | bool "System Controller Register R/W Based on Regmap" | |
1067 | depends on OF | |
1068 | select REGMAP_MMIO | |
75060a1d | 1069 | help |
87d68730 DA |
1070 | Select this option to enable accessing system control registers |
1071 | via regmap. | |
75060a1d | 1072 | |
c948ef3a GG |
1073 | config MFD_PALMAS |
1074 | bool "Support for the TI Palmas series chips" | |
1075 | select MFD_CORE | |
1076 | select REGMAP_I2C | |
1077 | select REGMAP_IRQ | |
1078 | depends on I2C=y | |
1079 | help | |
1080 | If you say yes here you get support for the Palmas | |
1081 | series of PMIC chips from Texas Instruments. | |
1082 | ||
f01312d8 LP |
1083 | config MFD_VIPERBOARD |
1084 | tristate "Support for Nano River Technologies Viperboard" | |
1085 | select MFD_CORE | |
1086 | depends on USB | |
1087 | default n | |
1088 | help | |
1089 | Say yes here if you want support for Nano River Technologies | |
1090 | Viperboard. | |
1091 | There are mfd cell drivers available for i2c master, adc and | |
1092 | both gpios found on the board. The spi part does not yet | |
1093 | have a driver. | |
1094 | You need to select the mfd cell drivers separately. | |
1095 | The drivers do not support all features the board exposes. | |
1096 | ||
c7b76dce AK |
1097 | config MFD_RETU |
1098 | tristate "Support for Retu multi-function device" | |
1099 | select MFD_CORE | |
1100 | depends on I2C | |
1101 | select REGMAP_IRQ | |
1102 | help | |
1103 | Retu is a multi-function device found on Nokia Internet Tablets | |
1104 | (770, N800 and N810). | |
1105 | ||
8a0a8e8e AB |
1106 | endmenu |
1107 | endif | |
b6d6454f | 1108 | |
a4e137ab | 1109 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 1110 | depends on ARCH_SA1100 |
a4e137ab RK |
1111 | |
1112 | config MCP | |
1113 | tristate | |
1114 | ||
5e742ad6 RK |
1115 | # Interface drivers |
1116 | config MCP_SA11X0 | |
1117 | tristate "Support SA11x0 MCP interface" | |
1118 | depends on ARCH_SA1100 | |
1119 | select MCP | |
1120 | ||
05c45ca9 RK |
1121 | # Chip drivers |
1122 | config MCP_UCB1200 | |
a3364409 RK |
1123 | bool "Support for UCB1200 / UCB1300" |
1124 | depends on MCP_SA11X0 | |
1125 | select MCP | |
05c45ca9 | 1126 | |
acb45439 RK |
1127 | config MCP_UCB1200_TS |
1128 | tristate "Touchscreen interface support" | |
1129 | depends on MCP_UCB1200 && INPUT | |
1130 | ||
a4e137ab | 1131 | endmenu |