[mirror_ubuntu-zesty-kernel.git] / drivers / mfd / ab8500-gpadc.c

/*
 * Copyright (C) ST-Ericsson SA 2010
 *
 * License Terms: GNU General Public License v2
 * Author: Arun R Murthy <arun.murthy@stericsson.com>
 * Author: Daniel Willerud <daniel.willerud@stericsson.com>
 * Author: Johan Palsson <johan.palsson@stericsson.com>
 */
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/completion.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/mfd/ab8500.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/ab8500/gpadc.h>

/*
 * GPADC register offsets
 * Bank : 0x0A
 */
#define AB8500_GPADC_CTRL1_REG		0x00
#define AB8500_GPADC_CTRL2_REG		0x01
#define AB8500_GPADC_CTRL3_REG		0x02
#define AB8500_GPADC_AUTO_TIMER_REG	0x03
#define AB8500_GPADC_STAT_REG		0x04
#define AB8500_GPADC_MANDATAL_REG	0x05
#define AB8500_GPADC_MANDATAH_REG	0x06
#define AB8500_GPADC_AUTODATAL_REG	0x07
#define AB8500_GPADC_AUTODATAH_REG	0x08
#define AB8500_GPADC_MUX_CTRL_REG	0x09

/*
 * OTP register offsets
 * Bank : 0x15
 */
#define AB8500_GPADC_CAL_1		0x0F
#define AB8500_GPADC_CAL_2		0x10
#define AB8500_GPADC_CAL_3		0x11
#define AB8500_GPADC_CAL_4		0x12
#define AB8500_GPADC_CAL_5		0x13
#define AB8500_GPADC_CAL_6		0x14
#define AB8500_GPADC_CAL_7		0x15

/* gpadc constants */
#define EN_VINTCORE12			0x04
#define EN_VTVOUT			0x02
#define EN_GPADC			0x01
#define DIS_GPADC			0x00
#define SW_AVG_16			0x60
#define ADC_SW_CONV			0x04
#define EN_ICHAR			0x80
#define EN_BUF				0x40
#define DIS_ZERO			0x00
#define GPADC_BUSY			0x01

/* GPADC constants from AB8500 spec, UM0836 */
#define ADC_RESOLUTION			1024
#define ADC_CH_BTEMP_MIN		0
#define ADC_CH_BTEMP_MAX		1350
#define ADC_CH_DIETEMP_MIN		0
#define ADC_CH_DIETEMP_MAX		1350
#define ADC_CH_CHG_V_MIN		0
#define ADC_CH_CHG_V_MAX		20030
#define ADC_CH_ACCDET2_MIN		0
#define ADC_CH_ACCDET2_MAX		2500
#define ADC_CH_VBAT_MIN			2300
#define ADC_CH_VBAT_MAX			4800
#define ADC_CH_CHG_I_MIN		0
#define ADC_CH_CHG_I_MAX		1500
#define ADC_CH_BKBAT_MIN		0
#define ADC_CH_BKBAT_MAX		3200

/* This is used to not lose precision when dividing to get gain and offset */
#define CALIB_SCALE			1000

enum cal_channels {
	ADC_INPUT_VMAIN = 0,
	ADC_INPUT_BTEMP,
	ADC_INPUT_VBAT,
	NBR_CAL_INPUTS,
};

/**
 * struct adc_cal_data - Table for storing gain and offset for the calibrated
 * ADC channels
 * @gain:		Gain of the ADC channel
 * @offset:		Offset of the ADC channel
 */
struct adc_cal_data {
	u64 gain;
	u64 offset;
};

/**
 * struct ab8500_gpadc - AB8500 GPADC device information
 * @dev:			pointer to the struct device
 * @node:			a list of AB8500 GPADCs, hence prepared for
				reentrance
 * @ab8500_gpadc_complete:	pointer to the struct completion, to indicate
 *				the completion of gpadc conversion
 * @ab8500_gpadc_lock:		structure of type mutex
 * @regu:			pointer to the struct regulator
 * @irq:			interrupt number that is used by gpadc
 * @cal_data			array of ADC calibration data structs
 */
struct ab8500_gpadc {
	struct device *dev;
	struct list_head node;
	struct completion ab8500_gpadc_complete;
	struct mutex ab8500_gpadc_lock;
	struct regulator *regu;
	int irq;
	struct adc_cal_data cal_data[NBR_CAL_INPUTS];
};

static LIST_HEAD(ab8500_gpadc_list);

/**
 * ab8500_gpadc_get() - returns a reference to the primary AB8500 GPADC
 * (i.e. the first GPADC in the instance list)
 */
struct ab8500_gpadc *ab8500_gpadc_get(char *name)
{
	struct ab8500_gpadc *gpadc;

	list_for_each_entry(gpadc, &ab8500_gpadc_list, node) {
		if (!strcmp(name, dev_name(gpadc->dev)))
		    return gpadc;
	}

	return ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(ab8500_gpadc_get);

static int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 input,
	int ad_value)
{
	int res;

	switch (input) {
	case MAIN_CHARGER_V:
		/* For some reason we don't have calibrated data */
		if (!gpadc->cal_data[ADC_INPUT_VMAIN].gain) {
			res = ADC_CH_CHG_V_MIN + (ADC_CH_CHG_V_MAX -
				ADC_CH_CHG_V_MIN) * ad_value /
				ADC_RESOLUTION;
			break;
		}
		/* Here we can use the calibrated data */
		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VMAIN].gain +
			gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE;
		break;

	case BAT_CTRL:
	case BTEMP_BALL:
	case ACC_DETECT1:
	case ADC_AUX1:
	case ADC_AUX2:
		/* For some reason we don't have calibrated data */
		if (!gpadc->cal_data[ADC_INPUT_BTEMP].gain) {
			res = ADC_CH_BTEMP_MIN + (ADC_CH_BTEMP_MAX -
				ADC_CH_BTEMP_MIN) * ad_value /
				ADC_RESOLUTION;
			break;
		}
		/* Here we can use the calibrated data */
		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_BTEMP].gain +
			gpadc->cal_data[ADC_INPUT_BTEMP].offset) / CALIB_SCALE;
		break;

	case MAIN_BAT_V:
		/* For some reason we don't have calibrated data */
		if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) {
			res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX -
				ADC_CH_VBAT_MIN) * ad_value /
				ADC_RESOLUTION;
			break;
		}
		/* Here we can use the calibrated data */
		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VBAT].gain +
			gpadc->cal_data[ADC_INPUT_VBAT].offset) / CALIB_SCALE;
		break;

	case DIE_TEMP:
		res = ADC_CH_DIETEMP_MIN +
			(ADC_CH_DIETEMP_MAX - ADC_CH_DIETEMP_MIN) * ad_value /
			ADC_RESOLUTION;
		break;

	case ACC_DETECT2:
		res = ADC_CH_ACCDET2_MIN +
			(ADC_CH_ACCDET2_MAX - ADC_CH_ACCDET2_MIN) * ad_value /
			ADC_RESOLUTION;
		break;

	case VBUS_V:
		res = ADC_CH_CHG_V_MIN +
			(ADC_CH_CHG_V_MAX - ADC_CH_CHG_V_MIN) * ad_value /
			ADC_RESOLUTION;
		break;

	case MAIN_CHARGER_C:
	case USB_CHARGER_C:
		res = ADC_CH_CHG_I_MIN +
			(ADC_CH_CHG_I_MAX - ADC_CH_CHG_I_MIN) * ad_value /
			ADC_RESOLUTION;
		break;

	case BK_BAT_V:
		res = ADC_CH_BKBAT_MIN +
			(ADC_CH_BKBAT_MAX - ADC_CH_BKBAT_MIN) * ad_value /
			ADC_RESOLUTION;
		break;

	default:
		dev_err(gpadc->dev,
			"unknown channel, not possible to convert\n");
		res = -EINVAL;
		break;

	}
	return res;
}

/**
 * ab8500_gpadc_convert() - gpadc conversion
 * @input:	analog input to be converted to digital data
 *
 * This function converts the selected analog i/p to digital
 * data.
 */
int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
{
	int ret;
	u16 data = 0;
	int looplimit = 0;
	u8 val, low_data, high_data;

	if (!gpadc)
		return -ENODEV;

	mutex_lock(&gpadc->ab8500_gpadc_lock);
	/* Enable VTVout LDO this is required for GPADC */
	regulator_enable(gpadc->regu);

	/* Check if ADC is not busy, lock and proceed */
	do {
		ret = abx500_get_register_interruptible(gpadc->dev,
			AB8500_GPADC, AB8500_GPADC_STAT_REG, &val);
		if (ret < 0)
			goto out;
		if (!(val & GPADC_BUSY))
			break;
		msleep(10);
	} while (++looplimit < 10);
	if (looplimit >= 10 && (val & GPADC_BUSY)) {
		dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
		ret = -EINVAL;
		goto out;
	}

	/* Enable GPADC */
	ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
		AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_GPADC, EN_GPADC);
	if (ret < 0) {
		dev_err(gpadc->dev, "gpadc_conversion: enable gpadc failed\n");
		goto out;
	}
	/* Select the input source and set average samples to 16 */
	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
		AB8500_GPADC_CTRL2_REG, (input | SW_AVG_16));
	if (ret < 0) {
		dev_err(gpadc->dev,
			"gpadc_conversion: set avg samples failed\n");
		goto out;
	}
	/*
	 * Enable ADC, buffering, select rising edge and enable ADC path
	 * charging current sense if it needed
	 */
	switch (input) {
	case MAIN_CHARGER_C:
	case USB_CHARGER_C:
		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
			AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
			EN_BUF | EN_ICHAR,
			EN_BUF | EN_ICHAR);
		break;
	default:
		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
			AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF);
		break;
	}
	if (ret < 0) {
		dev_err(gpadc->dev,
			"gpadc_conversion: select falling edge failed\n");
		goto out;
	}
	ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
		AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ADC_SW_CONV, ADC_SW_CONV);
	if (ret < 0) {
		dev_err(gpadc->dev,
			"gpadc_conversion: start s/w conversion failed\n");
		goto out;
	}
	/* wait for completion of conversion */
	if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, 2*HZ)) {
		dev_err(gpadc->dev,
			"timeout: didn't receive GPADC conversion interrupt\n");
		ret = -EINVAL;
		goto out;
	}

	/* Read the converted RAW data */
	ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
		AB8500_GPADC_MANDATAL_REG, &low_data);
	if (ret < 0) {
		dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n");
		goto out;
	}

	ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
		AB8500_GPADC_MANDATAH_REG, &high_data);
	if (ret < 0) {
		dev_err(gpadc->dev,
			"gpadc_conversion: read high data failed\n");
		goto out;
	}

	data = (high_data << 8) | low_data;
	/* Disable GPADC */
	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
	if (ret < 0) {
		dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
		goto out;
	}
	/* Disable VTVout LDO this is required for GPADC */
	regulator_disable(gpadc->regu);
	mutex_unlock(&gpadc->ab8500_gpadc_lock);
	ret = ab8500_gpadc_ad_to_voltage(gpadc, input, data);
	return ret;

out:
	/*
	 * It has shown to be needed to turn off the GPADC if an error occurs,
	 * otherwise we might have problem when waiting for the busy bit in the
	 * GPADC status register to go low. In V1.1 there wait_for_completion
	 * seems to timeout when waiting for an interrupt.. Not seen in V2.0
	 */
	(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
	regulator_disable(gpadc->regu);
	mutex_unlock(&gpadc->ab8500_gpadc_lock);
	dev_err(gpadc->dev,
		"gpadc_conversion: Failed to AD convert channel %d\n", input);
	return ret;
}
EXPORT_SYMBOL(ab8500_gpadc_convert);

/**
 * ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion
 * @irq:	irq number
 * @data:	pointer to the data passed during request irq
 *
 * This is a interrupt service routine for s/w gpadc conversion completion.
 * Notifies the gpadc completion is completed and the converted raw value
 * can be read from the registers.
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_bm_gpswadcconvend_handler(int irq, void *_gpadc)
{
	struct ab8500_gpadc *gpadc = _gpadc;

	complete(&gpadc->ab8500_gpadc_complete);

	return IRQ_HANDLED;
}

static int otp_cal_regs[] = {
	AB8500_GPADC_CAL_1,
	AB8500_GPADC_CAL_2,
	AB8500_GPADC_CAL_3,
	AB8500_GPADC_CAL_4,
	AB8500_GPADC_CAL_5,
	AB8500_GPADC_CAL_6,
	AB8500_GPADC_CAL_7,
};

static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
{
	int i;
	int ret[ARRAY_SIZE(otp_cal_regs)];
	u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];

	int vmain_high, vmain_low;
	int btemp_high, btemp_low;
	int vbat_high, vbat_low;

	/* First we read all OTP registers and store the error code */
	for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
		ret[i] = abx500_get_register_interruptible(gpadc->dev,
			AB8500_OTP_EMUL, otp_cal_regs[i],  &gpadc_cal[i]);
		if (ret[i] < 0)
			dev_err(gpadc->dev, "%s: read otp reg 0x%02x failed\n",
				__func__, otp_cal_regs[i]);
	}

	/*
	 * The ADC calibration data is stored in OTP registers.
	 * The layout of the calibration data is outlined below and a more
	 * detailed description can be found in UM0836
	 *
	 * vm_h/l = vmain_high/low
	 * bt_h/l = btemp_high/low
	 * vb_h/l = vbat_high/low
	 *
	 * Data bits:
	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
	 * |.......|.......|.......|.......|.......|.......|.......|.......
	 * |						   | vm_h9 | vm_h8
	 * |.......|.......|.......|.......|.......|.......|.......|.......
	 * |		   | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
	 * |.......|.......|.......|.......|.......|.......|.......|.......
	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
	 * |.......|.......|.......|.......|.......|.......|.......|.......
	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
	 * |.......|.......|.......|.......|.......|.......|.......|.......
	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
	 * |.......|.......|.......|.......|.......|.......|.......|.......
	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
	 * |.......|.......|.......|.......|.......|.......|.......|.......
	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
	 * |.......|.......|.......|.......|.......|.......|.......|.......
	 *
	 *
	 * Ideal output ADC codes corresponding to injected input voltages
	 * during manufacturing is:
	 *
	 * vmain_high: Vin = 19500mV / ADC ideal code = 997
	 * vmain_low:  Vin = 315mV   / ADC ideal code = 16
	 * btemp_high: Vin = 1300mV  / ADC ideal code = 985
	 * btemp_low:  Vin = 21mV    / ADC ideal code = 16
	 * vbat_high:  Vin = 4700mV  / ADC ideal code = 982
	 * vbat_low:   Vin = 2380mV  / ADC ideal code = 33
	 */

	/* Calculate gain and offset for VMAIN if all reads succeeded */
	if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
		vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
			((gpadc_cal[1] & 0x3F) << 2) |
			((gpadc_cal[2] & 0xC0) >> 6));

		vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);

		gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
			(19500 - 315) /	(vmain_high - vmain_low);

		gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * 19500 -
			(CALIB_SCALE * (19500 - 315) /
			 (vmain_high - vmain_low)) * vmain_high;
	} else {
		gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
	}

	/* Calculate gain and offset for BTEMP if all reads succeeded */
	if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) {
		btemp_high = (((gpadc_cal[2] & 0x01) << 9) |
			(gpadc_cal[3] << 1) |
			((gpadc_cal[4] & 0x80) >> 7));

		btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);

		gpadc->cal_data[ADC_INPUT_BTEMP].gain =
			CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);

		gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 -
			(CALIB_SCALE * (1300 - 21) /
			(btemp_high - btemp_low)) * btemp_high;
	} else {
		gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0;
	}

	/* Calculate gain and offset for VBAT if all reads succeeded */
	if (!(ret[4] < 0 || ret[5] < 0 || ret[6] < 0)) {
		vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]);
		vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);

		gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE *
			(4700 - 2380) /	(vbat_high - vbat_low);

		gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 -
			(CALIB_SCALE * (4700 - 2380) /
			(vbat_high - vbat_low)) * vbat_high;
	} else {
		gpadc->cal_data[ADC_INPUT_VBAT].gain = 0;
	}

	dev_dbg(gpadc->dev, "VMAIN gain %llu offset %llu\n",
		gpadc->cal_data[ADC_INPUT_VMAIN].gain,
		gpadc->cal_data[ADC_INPUT_VMAIN].offset);

	dev_dbg(gpadc->dev, "BTEMP gain %llu offset %llu\n",
		gpadc->cal_data[ADC_INPUT_BTEMP].gain,
		gpadc->cal_data[ADC_INPUT_BTEMP].offset);

	dev_dbg(gpadc->dev, "VBAT gain %llu offset %llu\n",
		gpadc->cal_data[ADC_INPUT_VBAT].gain,
		gpadc->cal_data[ADC_INPUT_VBAT].offset);
}

static int __devinit ab8500_gpadc_probe(struct platform_device *pdev)
{
	int ret = 0;
	struct ab8500_gpadc *gpadc;

	gpadc = kzalloc(sizeof(struct ab8500_gpadc), GFP_KERNEL);
	if (!gpadc) {
		dev_err(&pdev->dev, "Error: No memory\n");
		return -ENOMEM;
	}

	gpadc->irq = platform_get_irq_byname(pdev, "SW_CONV_END");
	if (gpadc->irq < 0) {
		dev_err(gpadc->dev, "failed to get platform irq-%d\n",
			gpadc->irq);
		ret = gpadc->irq;
		goto fail;
	}

	gpadc->dev = &pdev->dev;
	mutex_init(&gpadc->ab8500_gpadc_lock);

	/* Initialize completion used to notify completion of conversion */
	init_completion(&gpadc->ab8500_gpadc_complete);

	/* Register interrupt  - SwAdcComplete */
	ret = request_threaded_irq(gpadc->irq, NULL,
		ab8500_bm_gpswadcconvend_handler,
		IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc", gpadc);
	if (ret < 0) {
		dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n",
			gpadc->irq);
		goto fail;
	}

	/* VTVout LDO used to power up ab8500-GPADC */
	gpadc->regu = regulator_get(&pdev->dev, "vddadc");
	if (IS_ERR(gpadc->regu)) {
		ret = PTR_ERR(gpadc->regu);
		dev_err(gpadc->dev, "failed to get vtvout LDO\n");
		goto fail_irq;
	}
	ab8500_gpadc_read_calibration_data(gpadc);
	list_add_tail(&gpadc->node, &ab8500_gpadc_list);
	dev_dbg(gpadc->dev, "probe success\n");
	return 0;
fail_irq:
	free_irq(gpadc->irq, gpadc);
fail:
	kfree(gpadc);
	gpadc = NULL;
	return ret;
}

static int __devexit ab8500_gpadc_remove(struct platform_device *pdev)
{
	struct ab8500_gpadc *gpadc = platform_get_drvdata(pdev);

	/* remove this gpadc entry from the list */
	list_del(&gpadc->node);
	/* remove interrupt  - completion of Sw ADC conversion */
	free_irq(gpadc->irq, gpadc);
	/* disable VTVout LDO that is being used by GPADC */
	regulator_put(gpadc->regu);
	kfree(gpadc);
	gpadc = NULL;
	return 0;
}

static struct platform_driver ab8500_gpadc_driver = {
	.probe = ab8500_gpadc_probe,
	.remove = __devexit_p(ab8500_gpadc_remove),
	.driver = {
		.name = "ab8500-gpadc",
		.owner = THIS_MODULE,
	},
};

static int __init ab8500_gpadc_init(void)
{
	return platform_driver_register(&ab8500_gpadc_driver);
}

static void __exit ab8500_gpadc_exit(void)
{
	platform_driver_unregister(&ab8500_gpadc_driver);
}

subsys_initcall_sync(ab8500_gpadc_init);
module_exit(ab8500_gpadc_exit);

MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson");
MODULE_ALIAS("platform:ab8500_gpadc");
MODULE_DESCRIPTION("AB8500 GPADC driver");
Commit	Line	Data
dae2db30 AM	1	/*
	2	* Copyright (C) ST-Ericsson SA 2010
	3	*
	4	* License Terms: GNU General Public License v2
	5	* Author: Arun R Murthy <arun.murthy@stericsson.com>
6321992c	6	* Author: Daniel Willerud <daniel.willerud@stericsson.com>
586f3318	7	* Author: Johan Palsson <johan.palsson@stericsson.com>
dae2db30 AM	8	*/
	9	#include <linux/init.h>
	10	#include <linux/module.h>
	11	#include <linux/device.h>
	12	#include <linux/interrupt.h>
	13	#include <linux/spinlock.h>
	14	#include <linux/delay.h>
	15	#include <linux/platform_device.h>
	16	#include <linux/completion.h>
	17	#include <linux/regulator/consumer.h>
	18	#include <linux/err.h>
	19	#include <linux/slab.h>
6321992c	20	#include <linux/list.h>
dae2db30 AM	21	#include <linux/mfd/ab8500.h>
dae2db30 AM	22	#include <linux/mfd/abx500.h>
8bd4d7c4	23	#include <linux/mfd/ab8500/gpadc.h>
dae2db30 AM	24
	25	/*
	26	* GPADC register offsets
	27	* Bank : 0x0A
	28	*/
	29	#define AB8500_GPADC_CTRL1_REG 0x00
	30	#define AB8500_GPADC_CTRL2_REG 0x01
	31	#define AB8500_GPADC_CTRL3_REG 0x02
	32	#define AB8500_GPADC_AUTO_TIMER_REG 0x03
	33	#define AB8500_GPADC_STAT_REG 0x04
	34	#define AB8500_GPADC_MANDATAL_REG 0x05
	35	#define AB8500_GPADC_MANDATAH_REG 0x06
	36	#define AB8500_GPADC_AUTODATAL_REG 0x07
	37	#define AB8500_GPADC_AUTODATAH_REG 0x08
	38	#define AB8500_GPADC_MUX_CTRL_REG 0x09
	39
586f3318 JP	40	/*
	41	* OTP register offsets
	42	* Bank : 0x15
	43	*/
	44	#define AB8500_GPADC_CAL_1 0x0F
	45	#define AB8500_GPADC_CAL_2 0x10
	46	#define AB8500_GPADC_CAL_3 0x11
	47	#define AB8500_GPADC_CAL_4 0x12
	48	#define AB8500_GPADC_CAL_5 0x13
	49	#define AB8500_GPADC_CAL_6 0x14
	50	#define AB8500_GPADC_CAL_7 0x15
	51
dae2db30 AM	52	/* gpadc constants */
	53	#define EN_VINTCORE12 0x04
	54	#define EN_VTVOUT 0x02
	55	#define EN_GPADC 0x01
	56	#define DIS_GPADC 0x00
	57	#define SW_AVG_16 0x60
	58	#define ADC_SW_CONV 0x04
4aad5a91	59	#define EN_ICHAR 0x80
dae2db30 AM	60	#define EN_BUF 0x40
	61	#define DIS_ZERO 0x00
	62	#define GPADC_BUSY 0x01
	63
586f3318 JP	64	/* GPADC constants from AB8500 spec, UM0836 */
	65	#define ADC_RESOLUTION 1024
	66	#define ADC_CH_BTEMP_MIN 0
	67	#define ADC_CH_BTEMP_MAX 1350
	68	#define ADC_CH_DIETEMP_MIN 0
	69	#define ADC_CH_DIETEMP_MAX 1350
	70	#define ADC_CH_CHG_V_MIN 0
	71	#define ADC_CH_CHG_V_MAX 20030
	72	#define ADC_CH_ACCDET2_MIN 0
	73	#define ADC_CH_ACCDET2_MAX 2500
	74	#define ADC_CH_VBAT_MIN 2300
	75	#define ADC_CH_VBAT_MAX 4800
	76	#define ADC_CH_CHG_I_MIN 0
	77	#define ADC_CH_CHG_I_MAX 1500
	78	#define ADC_CH_BKBAT_MIN 0
	79	#define ADC_CH_BKBAT_MAX 3200
	80
	81	/* This is used to not lose precision when dividing to get gain and offset */
	82	#define CALIB_SCALE 1000
	83
	84	enum cal_channels {
	85	ADC_INPUT_VMAIN = 0,
	86	ADC_INPUT_BTEMP,
	87	ADC_INPUT_VBAT,
	88	NBR_CAL_INPUTS,
	89	};
	90
	91	/**
	92	* struct adc_cal_data - Table for storing gain and offset for the calibrated
	93	* ADC channels
	94	* @gain: Gain of the ADC channel
	95	* @offset: Offset of the ADC channel
	96	*/
	97	struct adc_cal_data {
	98	u64 gain;
	99	u64 offset;
	100	};
	101
dae2db30	102	/**
586f3318	103	* struct ab8500_gpadc - AB8500 GPADC device information
dae2db30	104	* @dev: pointer to the struct device
6321992c DW	105	* @node: a list of AB8500 GPADCs, hence prepared for
6321992c DW	106	reentrance
dae2db30 AM	107	* @ab8500_gpadc_complete: pointer to the struct completion, to indicate
	108	* the completion of gpadc conversion
	109	* @ab8500_gpadc_lock: structure of type mutex
	110	* @regu: pointer to the struct regulator
	111	* @irq: interrupt number that is used by gpadc
586f3318	112	* @cal_data array of ADC calibration data structs
dae2db30	113	*/
6321992c	114	struct ab8500_gpadc {
dae2db30	115	struct device *dev;
6321992c	116	struct list_head node;
dae2db30 AM	117	struct completion ab8500_gpadc_complete;
	118	struct mutex ab8500_gpadc_lock;
	119	struct regulator *regu;
	120	int irq;
586f3318	121	struct adc_cal_data cal_data[NBR_CAL_INPUTS];
6321992c DW	122	};
	123
	124	static LIST_HEAD(ab8500_gpadc_list);
	125
	126	/**
	127	* ab8500_gpadc_get() - returns a reference to the primary AB8500 GPADC
	128	* (i.e. the first GPADC in the instance list)
	129	*/
	130	struct ab8500_gpadc ab8500_gpadc_get(char name)
	131	{
	132	struct ab8500_gpadc *gpadc;
	133
	134	list_for_each_entry(gpadc, &ab8500_gpadc_list, node) {
	135	if (!strcmp(name, dev_name(gpadc->dev)))
	136	return gpadc;
	137	}
	138
	139	return ERR_PTR(-ENOENT);
	140	}
	141	EXPORT_SYMBOL(ab8500_gpadc_get);
dae2db30	142
586f3318 JP	143	static int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 input,
	144	int ad_value)
	145	{
	146	int res;
	147
	148	switch (input) {
	149	case MAIN_CHARGER_V:
	150	/* For some reason we don't have calibrated data */
	151	if (!gpadc->cal_data[ADC_INPUT_VMAIN].gain) {
	152	res = ADC_CH_CHG_V_MIN + (ADC_CH_CHG_V_MAX -
	153	ADC_CH_CHG_V_MIN) * ad_value /
	154	ADC_RESOLUTION;
	155	break;
	156	}
	157	/* Here we can use the calibrated data */
	158	res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VMAIN].gain +
	159	gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE;
	160	break;
	161
	162	case BAT_CTRL:
	163	case BTEMP_BALL:
	164	case ACC_DETECT1:
	165	case ADC_AUX1:
	166	case ADC_AUX2:
	167	/* For some reason we don't have calibrated data */
	168	if (!gpadc->cal_data[ADC_INPUT_BTEMP].gain) {
	169	res = ADC_CH_BTEMP_MIN + (ADC_CH_BTEMP_MAX -
	170	ADC_CH_BTEMP_MIN) * ad_value /
	171	ADC_RESOLUTION;
	172	break;
	173	}
	174	/* Here we can use the calibrated data */
	175	res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_BTEMP].gain +
	176	gpadc->cal_data[ADC_INPUT_BTEMP].offset) / CALIB_SCALE;
	177	break;
	178
	179	case MAIN_BAT_V:
	180	/* For some reason we don't have calibrated data */
	181	if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) {
	182	res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX -
	183	ADC_CH_VBAT_MIN) * ad_value /
	184	ADC_RESOLUTION;
	185	break;
	186	}
	187	/* Here we can use the calibrated data */
	188	res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VBAT].gain +
	189	gpadc->cal_data[ADC_INPUT_VBAT].offset) / CALIB_SCALE;
	190	break;
	191
	192	case DIE_TEMP:
	193	res = ADC_CH_DIETEMP_MIN +
	194	(ADC_CH_DIETEMP_MAX - ADC_CH_DIETEMP_MIN) * ad_value /
	195	ADC_RESOLUTION;
	196	break;
	197
	198	case ACC_DETECT2:
	199	res = ADC_CH_ACCDET2_MIN +
	200	(ADC_CH_ACCDET2_MAX - ADC_CH_ACCDET2_MIN) * ad_value /
	201	ADC_RESOLUTION;
	202	break;
	203
	204	case VBUS_V:
	205	res = ADC_CH_CHG_V_MIN +
	206	(ADC_CH_CHG_V_MAX - ADC_CH_CHG_V_MIN) * ad_value /
207	ADC_RESOLUTION;
208	break;
209
210	case MAIN_CHARGER_C:
211	case USB_CHARGER_C:
212	res = ADC_CH_CHG_I_MIN +
213	(ADC_CH_CHG_I_MAX - ADC_CH_CHG_I_MIN) * ad_value /
214	ADC_RESOLUTION;
215	break;
216
217	case BK_BAT_V:
218	res = ADC_CH_BKBAT_MIN +
219	(ADC_CH_BKBAT_MAX - ADC_CH_BKBAT_MIN) * ad_value /
220	ADC_RESOLUTION;
221	break;
222
223	default:
224	dev_err(gpadc->dev,
225	"unknown channel, not possible to convert\n");
226	res = -EINVAL;
227	break;
228
229	}
230	return res;
231	}
232
dae2db30 AM	233	/**
	234	* ab8500_gpadc_convert() - gpadc conversion
	235	* @input: analog input to be converted to digital data
	236	*
	237	* This function converts the selected analog i/p to digital
586f3318	238	* data.
dae2db30	239	*/
6321992c	240	int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
dae2db30 AM	241	{
	242	int ret;
	243	u16 data = 0;
	244	int looplimit = 0;
	245	u8 val, low_data, high_data;
	246
6321992c	247	if (!gpadc)
dae2db30 AM	248	return -ENODEV;
dae2db30 AM	249
6321992c	250	mutex_lock(&gpadc->ab8500_gpadc_lock);
dae2db30	251	/* Enable VTVout LDO this is required for GPADC */
6321992c	252	regulator_enable(gpadc->regu);
dae2db30 AM	253
	254	/* Check if ADC is not busy, lock and proceed */
	255	do {
6321992c DW	256	ret = abx500_get_register_interruptible(gpadc->dev,
6321992c DW	257	AB8500_GPADC, AB8500_GPADC_STAT_REG, &val);
dae2db30 AM	258	if (ret < 0)
	259	goto out;
	260	if (!(val & GPADC_BUSY))
	261	break;
	262	msleep(10);
	263	} while (++looplimit < 10);
	264	if (looplimit >= 10 && (val & GPADC_BUSY)) {
6321992c	265	dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
dae2db30 AM	266	ret = -EINVAL;
	267	goto out;
	268	}
	269
	270	/* Enable GPADC */
6321992c DW	271	ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
6321992c DW	272	AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_GPADC, EN_GPADC);
dae2db30	273	if (ret < 0) {
6321992c	274	dev_err(gpadc->dev, "gpadc_conversion: enable gpadc failed\n");
dae2db30 AM	275	goto out;
	276	}
	277	/* Select the input source and set average samples to 16 */
6321992c	278	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
dae2db30 AM	279	AB8500_GPADC_CTRL2_REG, (input \| SW_AVG_16));
dae2db30 AM	280	if (ret < 0) {
6321992c	281	dev_err(gpadc->dev,
dae2db30 AM	282	"gpadc_conversion: set avg samples failed\n");
	283	goto out;
	284	}
4aad5a91 KK	285	/*
	286	* Enable ADC, buffering, select rising edge and enable ADC path
	287	* charging current sense if it needed
	288	*/
	289	switch (input) {
	290	case MAIN_CHARGER_C:
	291	case USB_CHARGER_C:
	292	ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
	293	AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
	294	EN_BUF \| EN_ICHAR,
	295	EN_BUF \| EN_ICHAR);
	296	break;
	297	default:
	298	ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
	299	AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF);
	300	break;
	301	}
dae2db30	302	if (ret < 0) {
6321992c	303	dev_err(gpadc->dev,
dae2db30 AM	304	"gpadc_conversion: select falling edge failed\n");
	305	goto out;
	306	}
6321992c DW	307	ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
6321992c DW	308	AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ADC_SW_CONV, ADC_SW_CONV);
dae2db30	309	if (ret < 0) {
6321992c	310	dev_err(gpadc->dev,
dae2db30 AM	311	"gpadc_conversion: start s/w conversion failed\n");
	312	goto out;
	313	}
	314	/* wait for completion of conversion */
6321992c DW	315	if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, 2*HZ)) {
6321992c DW	316	dev_err(gpadc->dev,
25985edc	317	"timeout: didn't receive GPADC conversion interrupt\n");
dae2db30 AM	318	ret = -EINVAL;
	319	goto out;
	320	}
	321
	322	/* Read the converted RAW data */
6321992c	323	ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
dae2db30 AM	324	AB8500_GPADC_MANDATAL_REG, &low_data);
dae2db30 AM	325	if (ret < 0) {
6321992c	326	dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n");
dae2db30 AM	327	goto out;
	328	}
	329
6321992c	330	ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
dae2db30 AM	331	AB8500_GPADC_MANDATAH_REG, &high_data);
dae2db30 AM	332	if (ret < 0) {
6321992c DW	333	dev_err(gpadc->dev,
6321992c DW	334	"gpadc_conversion: read high data failed\n");
dae2db30 AM	335	goto out;
	336	}
	337
	338	data = (high_data << 8) \| low_data;
	339	/* Disable GPADC */
6321992c	340	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
dae2db30 AM	341	AB8500_GPADC_CTRL1_REG, DIS_GPADC);
dae2db30 AM	342	if (ret < 0) {
6321992c	343	dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
dae2db30 AM	344	goto out;
	345	}
	346	/* Disable VTVout LDO this is required for GPADC */
6321992c DW	347	regulator_disable(gpadc->regu);
6321992c DW	348	mutex_unlock(&gpadc->ab8500_gpadc_lock);
586f3318 JP	349	ret = ab8500_gpadc_ad_to_voltage(gpadc, input, data);
586f3318 JP	350	return ret;
dae2db30 AM	351
	352	out:
	353	/*
	354	* It has shown to be needed to turn off the GPADC if an error occurs,
	355	* otherwise we might have problem when waiting for the busy bit in the
	356	* GPADC status register to go low. In V1.1 there wait_for_completion
	357	* seems to timeout when waiting for an interrupt.. Not seen in V2.0
	358	*/
6321992c	359	(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
dae2db30	360	AB8500_GPADC_CTRL1_REG, DIS_GPADC);
6321992c DW	361	regulator_disable(gpadc->regu);
	362	mutex_unlock(&gpadc->ab8500_gpadc_lock);
	363	dev_err(gpadc->dev,
	364	"gpadc_conversion: Failed to AD convert channel %d\n", input);
dae2db30 AM	365	return ret;
	366	}
	367	EXPORT_SYMBOL(ab8500_gpadc_convert);
	368
	369	/**
	370	* ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion
	371	* @irq: irq number
	372	* @data: pointer to the data passed during request irq
	373	*
	374	* This is a interrupt service routine for s/w gpadc conversion completion.
	375	* Notifies the gpadc completion is completed and the converted raw value
	376	* can be read from the registers.
	377	* Returns IRQ status(IRQ_HANDLED)
	378	*/
6321992c	379	static irqreturn_t ab8500_bm_gpswadcconvend_handler(int irq, void *_gpadc)
dae2db30	380	{
6321992c	381	struct ab8500_gpadc *gpadc = _gpadc;
dae2db30 AM	382
	383	complete(&gpadc->ab8500_gpadc_complete);
	384
	385	return IRQ_HANDLED;
	386	}
	387
586f3318 JP	388	static int otp_cal_regs[] = {
	389	AB8500_GPADC_CAL_1,
	390	AB8500_GPADC_CAL_2,
	391	AB8500_GPADC_CAL_3,
	392	AB8500_GPADC_CAL_4,
	393	AB8500_GPADC_CAL_5,
	394	AB8500_GPADC_CAL_6,
	395	AB8500_GPADC_CAL_7,
	396	};
	397
	398	static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
	399	{
	400	int i;
	401	int ret[ARRAY_SIZE(otp_cal_regs)];
	402	u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];
	403
	404	int vmain_high, vmain_low;
	405	int btemp_high, btemp_low;
	406	int vbat_high, vbat_low;
	407
	408	/* First we read all OTP registers and store the error code */
	409	for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
	410	ret[i] = abx500_get_register_interruptible(gpadc->dev,
	411	AB8500_OTP_EMUL, otp_cal_regs[i], &gpadc_cal[i]);
	412	if (ret[i] < 0)
	413	dev_err(gpadc->dev, "%s: read otp reg 0x%02x failed\n",
	414	__func__, otp_cal_regs[i]);
	415	}
	416
	417	/*
	418	* The ADC calibration data is stored in OTP registers.
	419	* The layout of the calibration data is outlined below and a more
	420	* detailed description can be found in UM0836
	421	*
	422	* vm_h/l = vmain_high/low
	423	* bt_h/l = btemp_high/low
	424	* vb_h/l = vbat_high/low
	425	*
	426	* Data bits:
	427	* \| 7 \| 6 \| 5 \| 4 \| 3 \| 2 \| 1 \| 0
	428	* \|.......\|.......\|.......\|.......\|.......\|.......\|.......\|.......
	429	* \| \| vm_h9 \| vm_h8
	430	* \|.......\|.......\|.......\|.......\|.......\|.......\|.......\|.......
	431	* \| \| vm_h7 \| vm_h6 \| vm_h5 \| vm_h4 \| vm_h3 \| vm_h2
	432	* \|.......\|.......\|.......\|.......\|.......\|.......\|.......\|.......
	433	* \| vm_h1 \| vm_h0 \| vm_l4 \| vm_l3 \| vm_l2 \| vm_l1 \| vm_l0 \| bt_h9
	434	* \|.......\|.......\|.......\|.......\|.......\|.......\|.......\|.......
	435	* \| bt_h8 \| bt_h7 \| bt_h6 \| bt_h5 \| bt_h4 \| bt_h3 \| bt_h2 \| bt_h1
	436	* \|.......\|.......\|.......\|.......\|.......\|.......\|.......\|.......
	437	* \| bt_h0 \| bt_l4 \| bt_l3 \| bt_l2 \| bt_l1 \| bt_l0 \| vb_h9 \| vb_h8
	438	* \|.......\|.......\|.......\|.......\|.......\|.......\|.......\|.......
	439	* \| vb_h7 \| vb_h6 \| vb_h5 \| vb_h4 \| vb_h3 \| vb_h2 \| vb_h1 \| vb_h0
	440	* \|.......\|.......\|.......\|.......\|.......\|.......\|.......\|.......
	441	* \| vb_l5 \| vb_l4 \| vb_l3 \| vb_l2 \| vb_l1 \| vb_l0 \|
	442	* \|.......\|.......\|.......\|.......\|.......\|.......\|.......\|.......
	443	*
	444	*
	445	* Ideal output ADC codes corresponding to injected input voltages
	446	* during manufacturing is:
	447	*
	448	* vmain_high: Vin = 19500mV / ADC ideal code = 997
	449	* vmain_low: Vin = 315mV / ADC ideal code = 16
	450	* btemp_high: Vin = 1300mV / ADC ideal code = 985
	451	* btemp_low: Vin = 21mV / ADC ideal code = 16
452	* vbat_high: Vin = 4700mV / ADC ideal code = 982
453	* vbat_low: Vin = 2380mV / ADC ideal code = 33
454	*/
455
456	/* Calculate gain and offset for VMAIN if all reads succeeded */
457	if (!(ret[0] < 0 \|\| ret[1] < 0 \|\| ret[2] < 0)) {
458	vmain_high = (((gpadc_cal[0] & 0x03) << 8) \|
459	((gpadc_cal[1] & 0x3F) << 2) \|
460	((gpadc_cal[2] & 0xC0) >> 6));
461
462	vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
463
464	gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
465	(19500 - 315) / (vmain_high - vmain_low);
466
467	gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * 19500 -
468	(CALIB_SCALE * (19500 - 315) /
469	(vmain_high - vmain_low)) * vmain_high;
470	} else {
471	gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
472	}
473
474	/* Calculate gain and offset for BTEMP if all reads succeeded */
475	if (!(ret[2] < 0 \|\| ret[3] < 0 \|\| ret[4] < 0)) {
476	btemp_high = (((gpadc_cal[2] & 0x01) << 9) \|
477	(gpadc_cal[3] << 1) \|
478	((gpadc_cal[4] & 0x80) >> 7));
479
480	btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);
481
482	gpadc->cal_data[ADC_INPUT_BTEMP].gain =
483	CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);
484
485	gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 -
486	(CALIB_SCALE * (1300 - 21) /
487	(btemp_high - btemp_low)) * btemp_high;
488	} else {
489	gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0;
490	}
491
492	/* Calculate gain and offset for VBAT if all reads succeeded */
493	if (!(ret[4] < 0 \|\| ret[5] < 0 \|\| ret[6] < 0)) {
494	vbat_high = (((gpadc_cal[4] & 0x03) << 8) \| gpadc_cal[5]);
495	vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);
496
497	gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE *
498	(4700 - 2380) / (vbat_high - vbat_low);
499
500	gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 -
501	(CALIB_SCALE * (4700 - 2380) /
502	(vbat_high - vbat_low)) * vbat_high;
503	} else {
504	gpadc->cal_data[ADC_INPUT_VBAT].gain = 0;
505	}
506
507	dev_dbg(gpadc->dev, "VMAIN gain %llu offset %llu\n",
508	gpadc->cal_data[ADC_INPUT_VMAIN].gain,
509	gpadc->cal_data[ADC_INPUT_VMAIN].offset);
510
511	dev_dbg(gpadc->dev, "BTEMP gain %llu offset %llu\n",
512	gpadc->cal_data[ADC_INPUT_BTEMP].gain,
513	gpadc->cal_data[ADC_INPUT_BTEMP].offset);
514
515	dev_dbg(gpadc->dev, "VBAT gain %llu offset %llu\n",
516	gpadc->cal_data[ADC_INPUT_VBAT].gain,
517	gpadc->cal_data[ADC_INPUT_VBAT].offset);
518	}
519
dae2db30 AM	520	static int __devinit ab8500_gpadc_probe(struct platform_device *pdev)
	521	{
	522	int ret = 0;
	523	struct ab8500_gpadc *gpadc;
	524
	525	gpadc = kzalloc(sizeof(struct ab8500_gpadc), GFP_KERNEL);
	526	if (!gpadc) {
	527	dev_err(&pdev->dev, "Error: No memory\n");
	528	return -ENOMEM;
	529	}
	530
dae2db30 AM	531	gpadc->irq = platform_get_irq_byname(pdev, "SW_CONV_END");
dae2db30 AM	532	if (gpadc->irq < 0) {
6321992c DW	533	dev_err(gpadc->dev, "failed to get platform irq-%d\n",
6321992c DW	534	gpadc->irq);
dae2db30 AM	535	ret = gpadc->irq;
	536	goto fail;
	537	}
	538
	539	gpadc->dev = &pdev->dev;
6321992c	540	mutex_init(&gpadc->ab8500_gpadc_lock);
dae2db30 AM	541
	542	/* Initialize completion used to notify completion of conversion */
	543	init_completion(&gpadc->ab8500_gpadc_complete);
	544
	545	/* Register interrupt - SwAdcComplete */
	546	ret = request_threaded_irq(gpadc->irq, NULL,
	547	ab8500_bm_gpswadcconvend_handler,
	548	IRQF_NO_SUSPEND \| IRQF_SHARED, "ab8500-gpadc", gpadc);
	549	if (ret < 0) {
	550	dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n",
	551	gpadc->irq);
	552	goto fail;
	553	}
	554
	555	/* VTVout LDO used to power up ab8500-GPADC */
	556	gpadc->regu = regulator_get(&pdev->dev, "vddadc");
	557	if (IS_ERR(gpadc->regu)) {
	558	ret = PTR_ERR(gpadc->regu);
	559	dev_err(gpadc->dev, "failed to get vtvout LDO\n");
633e0fa5	560	goto fail_irq;
dae2db30	561	}
586f3318	562	ab8500_gpadc_read_calibration_data(gpadc);
6321992c	563	list_add_tail(&gpadc->node, &ab8500_gpadc_list);
dae2db30 AM	564	dev_dbg(gpadc->dev, "probe success\n");
dae2db30 AM	565	return 0;
633e0fa5 DW	566	fail_irq:
633e0fa5 DW	567	free_irq(gpadc->irq, gpadc);
dae2db30 AM	568	fail:
	569	kfree(gpadc);
	570	gpadc = NULL;
	571	return ret;
	572	}
	573
	574	static int __devexit ab8500_gpadc_remove(struct platform_device *pdev)
	575	{
	576	struct ab8500_gpadc *gpadc = platform_get_drvdata(pdev);
	577
6321992c DW	578	/* remove this gpadc entry from the list */
6321992c DW	579	list_del(&gpadc->node);
dae2db30	580	/* remove interrupt - completion of Sw ADC conversion */
6321992c	581	free_irq(gpadc->irq, gpadc);
dae2db30 AM	582	/* disable VTVout LDO that is being used by GPADC */
	583	regulator_put(gpadc->regu);
	584	kfree(gpadc);
	585	gpadc = NULL;
	586	return 0;
	587	}
	588
	589	static struct platform_driver ab8500_gpadc_driver = {
	590	.probe = ab8500_gpadc_probe,
	591	.remove = __devexit_p(ab8500_gpadc_remove),
	592	.driver = {
	593	.name = "ab8500-gpadc",
	594	.owner = THIS_MODULE,
	595	},
	596	};
	597
	598	static int __init ab8500_gpadc_init(void)
	599	{
	600	return platform_driver_register(&ab8500_gpadc_driver);
	601	}
	602
	603	static void __exit ab8500_gpadc_exit(void)
	604	{
	605	platform_driver_unregister(&ab8500_gpadc_driver);
	606	}
	607
	608	subsys_initcall_sync(ab8500_gpadc_init);
	609	module_exit(ab8500_gpadc_exit);
	610
	611	MODULE_LICENSE("GPL v2");
586f3318	612	MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson");
dae2db30 AM	613	MODULE_ALIAS("platform:ab8500_gpadc");
dae2db30 AM	614	MODULE_DESCRIPTION("AB8500 GPADC driver");