]>
Commit | Line | Data |
---|---|---|
327156c5 LD |
1 | /* |
2 | * Maxim MAX77620 MFD Driver | |
3 | * | |
4 | * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved. | |
5 | * | |
6 | * Author: | |
7 | * Laxman Dewangan <ldewangan@nvidia.com> | |
8 | * Chaitanya Bandi <bandik@nvidia.com> | |
9 | * Mallikarjun Kasoju <mkasoju@nvidia.com> | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License version 2 as | |
13 | * published by the Free Software Foundation. | |
14 | */ | |
15 | ||
16 | /****************** Teminology used in driver ******************** | |
17 | * Here are some terminology used from datasheet for quick reference: | |
18 | * Flexible Power Sequence (FPS): | |
19 | * The Flexible Power Sequencer (FPS) allows each regulator to power up under | |
20 | * hardware or software control. Additionally, each regulator can power on | |
21 | * independently or among a group of other regulators with an adjustable | |
22 | * power-up and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can | |
23 | * be programmed to be part of a sequence allowing external regulators to be | |
24 | * sequenced along with internal regulators. 32KHz clock can be programmed to | |
25 | * be part of a sequence. | |
26 | * There is 3 FPS confguration registers and all resources are configured to | |
27 | * any of these FPS or no FPS. | |
28 | */ | |
29 | ||
30 | #include <linux/i2c.h> | |
31 | #include <linux/interrupt.h> | |
32 | #include <linux/mfd/core.h> | |
33 | #include <linux/mfd/max77620.h> | |
34 | #include <linux/module.h> | |
35 | #include <linux/of.h> | |
36 | #include <linux/of_device.h> | |
37 | #include <linux/regmap.h> | |
38 | #include <linux/slab.h> | |
39 | ||
40 | static struct resource gpio_resources[] = { | |
41 | DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO), | |
42 | }; | |
43 | ||
44 | static struct resource power_resources[] = { | |
45 | DEFINE_RES_IRQ(MAX77620_IRQ_LBT_MBATLOW), | |
46 | }; | |
47 | ||
48 | static struct resource rtc_resources[] = { | |
49 | DEFINE_RES_IRQ(MAX77620_IRQ_TOP_RTC), | |
50 | }; | |
51 | ||
52 | static struct resource thermal_resources[] = { | |
53 | DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM1), | |
54 | DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM2), | |
55 | }; | |
56 | ||
57 | static const struct regmap_irq max77620_top_irqs[] = { | |
58 | REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GLBL, 0, MAX77620_IRQ_TOP_GLBL_MASK), | |
59 | REGMAP_IRQ_REG(MAX77620_IRQ_TOP_SD, 0, MAX77620_IRQ_TOP_SD_MASK), | |
60 | REGMAP_IRQ_REG(MAX77620_IRQ_TOP_LDO, 0, MAX77620_IRQ_TOP_LDO_MASK), | |
61 | REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GPIO, 0, MAX77620_IRQ_TOP_GPIO_MASK), | |
62 | REGMAP_IRQ_REG(MAX77620_IRQ_TOP_RTC, 0, MAX77620_IRQ_TOP_RTC_MASK), | |
63 | REGMAP_IRQ_REG(MAX77620_IRQ_TOP_32K, 0, MAX77620_IRQ_TOP_32K_MASK), | |
64 | REGMAP_IRQ_REG(MAX77620_IRQ_TOP_ONOFF, 0, MAX77620_IRQ_TOP_ONOFF_MASK), | |
65 | REGMAP_IRQ_REG(MAX77620_IRQ_LBT_MBATLOW, 1, MAX77620_IRQ_LBM_MASK), | |
66 | REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM1, 1, MAX77620_IRQ_TJALRM1_MASK), | |
67 | REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM2, 1, MAX77620_IRQ_TJALRM2_MASK), | |
68 | }; | |
69 | ||
70 | static const struct mfd_cell max77620_children[] = { | |
71 | { .name = "max77620-pinctrl", }, | |
72 | { .name = "max77620-clock", }, | |
73 | { .name = "max77620-pmic", }, | |
74 | { .name = "max77620-watchdog", }, | |
75 | { | |
76 | .name = "max77620-gpio", | |
77 | .resources = gpio_resources, | |
78 | .num_resources = ARRAY_SIZE(gpio_resources), | |
79 | }, { | |
80 | .name = "max77620-rtc", | |
81 | .resources = rtc_resources, | |
82 | .num_resources = ARRAY_SIZE(rtc_resources), | |
83 | }, { | |
84 | .name = "max77620-power", | |
85 | .resources = power_resources, | |
86 | .num_resources = ARRAY_SIZE(power_resources), | |
87 | }, { | |
88 | .name = "max77620-thermal", | |
89 | .resources = thermal_resources, | |
90 | .num_resources = ARRAY_SIZE(thermal_resources), | |
91 | }, | |
92 | }; | |
93 | ||
94 | static const struct mfd_cell max20024_children[] = { | |
95 | { .name = "max20024-pinctrl", }, | |
96 | { .name = "max77620-clock", }, | |
97 | { .name = "max20024-pmic", }, | |
98 | { .name = "max77620-watchdog", }, | |
99 | { | |
100 | .name = "max77620-gpio", | |
101 | .resources = gpio_resources, | |
102 | .num_resources = ARRAY_SIZE(gpio_resources), | |
103 | }, { | |
104 | .name = "max77620-rtc", | |
105 | .resources = rtc_resources, | |
106 | .num_resources = ARRAY_SIZE(rtc_resources), | |
107 | }, { | |
108 | .name = "max20024-power", | |
109 | .resources = power_resources, | |
110 | .num_resources = ARRAY_SIZE(power_resources), | |
111 | }, | |
112 | }; | |
113 | ||
114 | static struct regmap_irq_chip max77620_top_irq_chip = { | |
115 | .name = "max77620-top", | |
116 | .irqs = max77620_top_irqs, | |
117 | .num_irqs = ARRAY_SIZE(max77620_top_irqs), | |
118 | .num_regs = 2, | |
119 | .status_base = MAX77620_REG_IRQTOP, | |
120 | .mask_base = MAX77620_REG_IRQTOPM, | |
121 | }; | |
122 | ||
123 | static const struct regmap_range max77620_readable_ranges[] = { | |
124 | regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4), | |
125 | }; | |
126 | ||
127 | static const struct regmap_access_table max77620_readable_table = { | |
128 | .yes_ranges = max77620_readable_ranges, | |
129 | .n_yes_ranges = ARRAY_SIZE(max77620_readable_ranges), | |
130 | }; | |
131 | ||
132 | static const struct regmap_range max20024_readable_ranges[] = { | |
133 | regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4), | |
134 | regmap_reg_range(MAX20024_REG_MAX_ADD, MAX20024_REG_MAX_ADD), | |
135 | }; | |
136 | ||
137 | static const struct regmap_access_table max20024_readable_table = { | |
138 | .yes_ranges = max20024_readable_ranges, | |
139 | .n_yes_ranges = ARRAY_SIZE(max20024_readable_ranges), | |
140 | }; | |
141 | ||
142 | static const struct regmap_range max77620_writable_ranges[] = { | |
143 | regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4), | |
144 | }; | |
145 | ||
146 | static const struct regmap_access_table max77620_writable_table = { | |
147 | .yes_ranges = max77620_writable_ranges, | |
148 | .n_yes_ranges = ARRAY_SIZE(max77620_writable_ranges), | |
149 | }; | |
150 | ||
151 | static const struct regmap_range max77620_cacheable_ranges[] = { | |
152 | regmap_reg_range(MAX77620_REG_SD0_CFG, MAX77620_REG_LDO_CFG3), | |
153 | regmap_reg_range(MAX77620_REG_FPS_CFG0, MAX77620_REG_FPS_SD3), | |
154 | }; | |
155 | ||
156 | static const struct regmap_access_table max77620_volatile_table = { | |
157 | .no_ranges = max77620_cacheable_ranges, | |
158 | .n_no_ranges = ARRAY_SIZE(max77620_cacheable_ranges), | |
159 | }; | |
160 | ||
161 | static const struct regmap_config max77620_regmap_config = { | |
162 | .name = "power-slave", | |
163 | .reg_bits = 8, | |
164 | .val_bits = 8, | |
165 | .max_register = MAX77620_REG_DVSSD4 + 1, | |
166 | .cache_type = REGCACHE_RBTREE, | |
167 | .rd_table = &max77620_readable_table, | |
168 | .wr_table = &max77620_writable_table, | |
169 | .volatile_table = &max77620_volatile_table, | |
170 | }; | |
171 | ||
172 | static const struct regmap_config max20024_regmap_config = { | |
173 | .name = "power-slave", | |
174 | .reg_bits = 8, | |
175 | .val_bits = 8, | |
176 | .max_register = MAX20024_REG_MAX_ADD + 1, | |
177 | .cache_type = REGCACHE_RBTREE, | |
178 | .rd_table = &max20024_readable_table, | |
179 | .wr_table = &max77620_writable_table, | |
180 | .volatile_table = &max77620_volatile_table, | |
181 | }; | |
182 | ||
183 | /* max77620_get_fps_period_reg_value: Get FPS bit field value from | |
184 | * requested periods. | |
185 | * MAX77620 supports the FPS period of 40, 80, 160, 320, 540, 1280, 2560 | |
186 | * and 5120 microseconds. MAX20024 supports the FPS period of 20, 40, 80, | |
187 | * 160, 320, 540, 1280 and 2560 microseconds. | |
188 | * The FPS register has 3 bits field to set the FPS period as | |
189 | * bits max77620 max20024 | |
190 | * 000 40 20 | |
191 | * 001 80 40 | |
192 | * ::: | |
193 | */ | |
194 | static int max77620_get_fps_period_reg_value(struct max77620_chip *chip, | |
195 | int tperiod) | |
196 | { | |
197 | int fps_min_period; | |
198 | int i; | |
199 | ||
200 | switch (chip->chip_id) { | |
201 | case MAX20024: | |
202 | fps_min_period = MAX20024_FPS_PERIOD_MIN_US; | |
203 | break; | |
204 | case MAX77620: | |
205 | fps_min_period = MAX77620_FPS_PERIOD_MIN_US; | |
206 | default: | |
207 | return -EINVAL; | |
208 | } | |
209 | ||
210 | for (i = 0; i < 7; i++) { | |
211 | if (fps_min_period >= tperiod) | |
212 | return i; | |
213 | fps_min_period *= 2; | |
214 | } | |
215 | ||
216 | return i; | |
217 | } | |
218 | ||
219 | /* max77620_config_fps: Configure FPS configuration registers | |
220 | * based on platform specific information. | |
221 | */ | |
222 | static int max77620_config_fps(struct max77620_chip *chip, | |
223 | struct device_node *fps_np) | |
224 | { | |
225 | struct device *dev = chip->dev; | |
226 | unsigned int mask = 0, config = 0; | |
227 | u32 fps_max_period; | |
228 | u32 param_val; | |
229 | int tperiod, fps_id; | |
230 | int ret; | |
231 | char fps_name[10]; | |
232 | ||
233 | switch (chip->chip_id) { | |
234 | case MAX20024: | |
235 | fps_max_period = MAX20024_FPS_PERIOD_MAX_US; | |
236 | break; | |
237 | case MAX77620: | |
238 | fps_max_period = MAX77620_FPS_PERIOD_MAX_US; | |
239 | default: | |
240 | return -EINVAL; | |
241 | } | |
242 | ||
243 | for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) { | |
244 | sprintf(fps_name, "fps%d", fps_id); | |
245 | if (!strcmp(fps_np->name, fps_name)) | |
246 | break; | |
247 | } | |
248 | ||
249 | if (fps_id == MAX77620_FPS_COUNT) { | |
250 | dev_err(dev, "FPS node name %s is not valid\n", fps_np->name); | |
251 | return -EINVAL; | |
252 | } | |
253 | ||
254 | ret = of_property_read_u32(fps_np, "maxim,shutdown-fps-time-period-us", | |
255 | ¶m_val); | |
256 | if (!ret) { | |
257 | mask |= MAX77620_FPS_TIME_PERIOD_MASK; | |
258 | chip->shutdown_fps_period[fps_id] = min(param_val, | |
259 | fps_max_period); | |
260 | tperiod = max77620_get_fps_period_reg_value(chip, | |
261 | chip->shutdown_fps_period[fps_id]); | |
262 | config |= tperiod << MAX77620_FPS_TIME_PERIOD_SHIFT; | |
263 | } | |
264 | ||
265 | ret = of_property_read_u32(fps_np, "maxim,suspend-fps-time-period-us", | |
266 | ¶m_val); | |
267 | if (!ret) | |
268 | chip->suspend_fps_period[fps_id] = min(param_val, | |
269 | fps_max_period); | |
270 | ||
271 | ret = of_property_read_u32(fps_np, "maxim,fps-event-source", | |
272 | ¶m_val); | |
273 | if (!ret) { | |
274 | if (param_val > 2) { | |
275 | dev_err(dev, "FPS%d event-source invalid\n", fps_id); | |
276 | return -EINVAL; | |
277 | } | |
278 | mask |= MAX77620_FPS_EN_SRC_MASK; | |
279 | config |= param_val << MAX77620_FPS_EN_SRC_SHIFT; | |
280 | if (param_val == 2) { | |
281 | mask |= MAX77620_FPS_ENFPS_SW_MASK; | |
282 | config |= MAX77620_FPS_ENFPS_SW; | |
283 | } | |
284 | } | |
285 | ||
286 | if (!chip->sleep_enable && !chip->enable_global_lpm) { | |
287 | ret = of_property_read_u32(fps_np, | |
288 | "maxim,device-state-on-disabled-event", | |
289 | ¶m_val); | |
290 | if (!ret) { | |
291 | if (param_val == 0) | |
292 | chip->sleep_enable = true; | |
293 | else if (param_val == 1) | |
294 | chip->enable_global_lpm = true; | |
295 | } | |
296 | } | |
297 | ||
298 | ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id, | |
299 | mask, config); | |
300 | if (ret < 0) { | |
301 | dev_err(dev, "Failed to update FPS CFG: %d\n", ret); | |
302 | return ret; | |
303 | } | |
304 | ||
305 | return 0; | |
306 | } | |
307 | ||
308 | static int max77620_initialise_fps(struct max77620_chip *chip) | |
309 | { | |
310 | struct device *dev = chip->dev; | |
311 | struct device_node *fps_np, *fps_child; | |
312 | u8 config; | |
313 | int fps_id; | |
314 | int ret; | |
315 | ||
316 | for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) { | |
317 | chip->shutdown_fps_period[fps_id] = -1; | |
318 | chip->suspend_fps_period[fps_id] = -1; | |
319 | } | |
320 | ||
321 | fps_np = of_get_child_by_name(dev->of_node, "fps"); | |
322 | if (!fps_np) | |
323 | goto skip_fps; | |
324 | ||
325 | for_each_child_of_node(fps_np, fps_child) { | |
326 | ret = max77620_config_fps(chip, fps_child); | |
327 | if (ret < 0) | |
328 | return ret; | |
329 | } | |
330 | ||
331 | config = chip->enable_global_lpm ? MAX77620_ONOFFCNFG2_SLP_LPM_MSK : 0; | |
332 | ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, | |
333 | MAX77620_ONOFFCNFG2_SLP_LPM_MSK, config); | |
334 | if (ret < 0) { | |
335 | dev_err(dev, "Failed to update SLP_LPM: %d\n", ret); | |
336 | return ret; | |
337 | } | |
338 | ||
339 | skip_fps: | |
340 | /* Enable wake on EN0 pin */ | |
341 | ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, | |
342 | MAX77620_ONOFFCNFG2_WK_EN0, | |
343 | MAX77620_ONOFFCNFG2_WK_EN0); | |
344 | if (ret < 0) { | |
345 | dev_err(dev, "Failed to update WK_EN0: %d\n", ret); | |
346 | return ret; | |
347 | } | |
348 | ||
349 | /* For MAX20024, SLPEN will be POR reset if CLRSE is b11 */ | |
350 | if ((chip->chip_id == MAX20024) && chip->sleep_enable) { | |
351 | config = MAX77620_ONOFFCNFG1_SLPEN | MAX20024_ONOFFCNFG1_CLRSE; | |
352 | ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1, | |
353 | config, config); | |
354 | if (ret < 0) { | |
355 | dev_err(dev, "Failed to update SLPEN: %d\n", ret); | |
356 | return ret; | |
357 | } | |
358 | } | |
359 | ||
360 | return 0; | |
361 | } | |
362 | ||
363 | static int max77620_read_es_version(struct max77620_chip *chip) | |
364 | { | |
365 | unsigned int val; | |
366 | u8 cid_val[6]; | |
367 | int i; | |
368 | int ret; | |
369 | ||
370 | for (i = MAX77620_REG_CID0; i <= MAX77620_REG_CID5; i++) { | |
371 | ret = regmap_read(chip->rmap, i, &val); | |
372 | if (ret < 0) { | |
373 | dev_err(chip->dev, "Failed to read CID: %d\n", ret); | |
374 | return ret; | |
375 | } | |
376 | dev_dbg(chip->dev, "CID%d: 0x%02x\n", | |
377 | i - MAX77620_REG_CID0, val); | |
378 | cid_val[i - MAX77620_REG_CID0] = val; | |
379 | } | |
380 | ||
381 | /* CID4 is OTP Version and CID5 is ES version */ | |
382 | dev_info(chip->dev, "PMIC Version OTP:0x%02X and ES:0x%X\n", | |
383 | cid_val[4], MAX77620_CID5_DIDM(cid_val[5])); | |
384 | ||
385 | return ret; | |
386 | } | |
387 | ||
388 | static int max77620_probe(struct i2c_client *client, | |
389 | const struct i2c_device_id *id) | |
390 | { | |
391 | const struct regmap_config *rmap_config; | |
392 | struct max77620_chip *chip; | |
393 | const struct mfd_cell *mfd_cells; | |
394 | int n_mfd_cells; | |
395 | int ret; | |
396 | ||
397 | chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); | |
398 | if (!chip) | |
399 | return -ENOMEM; | |
400 | ||
401 | i2c_set_clientdata(client, chip); | |
402 | chip->dev = &client->dev; | |
403 | chip->irq_base = -1; | |
404 | chip->chip_irq = client->irq; | |
405 | chip->chip_id = (enum max77620_chip_id)id->driver_data; | |
406 | ||
407 | switch (chip->chip_id) { | |
408 | case MAX77620: | |
409 | mfd_cells = max77620_children; | |
410 | n_mfd_cells = ARRAY_SIZE(max77620_children); | |
411 | rmap_config = &max77620_regmap_config; | |
412 | break; | |
413 | case MAX20024: | |
414 | mfd_cells = max20024_children; | |
415 | n_mfd_cells = ARRAY_SIZE(max20024_children); | |
416 | rmap_config = &max20024_regmap_config; | |
417 | break; | |
418 | default: | |
419 | dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id); | |
420 | return -EINVAL; | |
421 | } | |
422 | ||
423 | chip->rmap = devm_regmap_init_i2c(client, rmap_config); | |
424 | if (IS_ERR(chip->rmap)) { | |
425 | ret = PTR_ERR(chip->rmap); | |
426 | dev_err(chip->dev, "Failed to intialise regmap: %d\n", ret); | |
427 | return ret; | |
428 | } | |
429 | ||
430 | ret = max77620_read_es_version(chip); | |
431 | if (ret < 0) | |
432 | return ret; | |
433 | ||
434 | ret = devm_regmap_add_irq_chip(chip->dev, chip->rmap, client->irq, | |
435 | IRQF_ONESHOT | IRQF_SHARED, | |
436 | chip->irq_base, &max77620_top_irq_chip, | |
437 | &chip->top_irq_data); | |
438 | if (ret < 0) { | |
439 | dev_err(chip->dev, "Failed to add regmap irq: %d\n", ret); | |
440 | return ret; | |
441 | } | |
442 | ||
443 | ret = max77620_initialise_fps(chip); | |
444 | if (ret < 0) | |
445 | return ret; | |
446 | ||
447 | ret = devm_mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE, | |
448 | mfd_cells, n_mfd_cells, NULL, 0, | |
449 | regmap_irq_get_domain(chip->top_irq_data)); | |
450 | if (ret < 0) { | |
451 | dev_err(chip->dev, "Failed to add MFD children: %d\n", ret); | |
452 | return ret; | |
453 | } | |
454 | ||
455 | return 0; | |
456 | } | |
457 | ||
458 | #ifdef CONFIG_PM_SLEEP | |
459 | static int max77620_set_fps_period(struct max77620_chip *chip, | |
460 | int fps_id, int time_period) | |
461 | { | |
462 | int period = max77620_get_fps_period_reg_value(chip, time_period); | |
463 | int ret; | |
464 | ||
465 | ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id, | |
466 | MAX77620_FPS_TIME_PERIOD_MASK, | |
467 | period << MAX77620_FPS_TIME_PERIOD_SHIFT); | |
468 | if (ret < 0) { | |
469 | dev_err(chip->dev, "Failed to update FPS period: %d\n", ret); | |
470 | return ret; | |
471 | } | |
472 | ||
473 | return 0; | |
474 | } | |
475 | ||
476 | static int max77620_i2c_suspend(struct device *dev) | |
477 | { | |
478 | struct max77620_chip *chip = dev_get_drvdata(dev); | |
479 | struct i2c_client *client = to_i2c_client(dev); | |
480 | unsigned int config; | |
481 | int fps; | |
482 | int ret; | |
483 | ||
484 | for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) { | |
485 | if (chip->suspend_fps_period[fps] < 0) | |
486 | continue; | |
487 | ||
488 | ret = max77620_set_fps_period(chip, fps, | |
489 | chip->suspend_fps_period[fps]); | |
490 | if (ret < 0) | |
491 | return ret; | |
492 | } | |
493 | ||
494 | /* | |
495 | * For MAX20024: No need to configure SLPEN on suspend as | |
496 | * it will be configured on Init. | |
497 | */ | |
498 | if (chip->chip_id == MAX20024) | |
499 | goto out; | |
500 | ||
501 | config = (chip->sleep_enable) ? MAX77620_ONOFFCNFG1_SLPEN : 0; | |
502 | ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1, | |
503 | MAX77620_ONOFFCNFG1_SLPEN, | |
504 | config); | |
505 | if (ret < 0) { | |
506 | dev_err(dev, "Failed to configure sleep in suspend: %d\n", ret); | |
507 | return ret; | |
508 | } | |
509 | ||
510 | /* Disable WK_EN0 */ | |
511 | ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, | |
512 | MAX77620_ONOFFCNFG2_WK_EN0, 0); | |
513 | if (ret < 0) { | |
514 | dev_err(dev, "Failed to configure WK_EN in suspend: %d\n", ret); | |
515 | return ret; | |
516 | } | |
517 | ||
518 | out: | |
519 | disable_irq(client->irq); | |
520 | ||
521 | return 0; | |
522 | } | |
523 | ||
524 | static int max77620_i2c_resume(struct device *dev) | |
525 | { | |
526 | struct max77620_chip *chip = dev_get_drvdata(dev); | |
527 | struct i2c_client *client = to_i2c_client(dev); | |
528 | int ret; | |
529 | int fps; | |
530 | ||
531 | for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) { | |
532 | if (chip->shutdown_fps_period[fps] < 0) | |
533 | continue; | |
534 | ||
535 | ret = max77620_set_fps_period(chip, fps, | |
536 | chip->shutdown_fps_period[fps]); | |
537 | if (ret < 0) | |
538 | return ret; | |
539 | } | |
540 | ||
541 | /* | |
542 | * For MAX20024: No need to configure WKEN0 on resume as | |
543 | * it is configured on Init. | |
544 | */ | |
545 | if (chip->chip_id == MAX20024) | |
546 | goto out; | |
547 | ||
548 | /* Enable WK_EN0 */ | |
549 | ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, | |
550 | MAX77620_ONOFFCNFG2_WK_EN0, | |
551 | MAX77620_ONOFFCNFG2_WK_EN0); | |
552 | if (ret < 0) { | |
553 | dev_err(dev, "Failed to configure WK_EN0 n resume: %d\n", ret); | |
554 | return ret; | |
555 | } | |
556 | ||
557 | out: | |
558 | enable_irq(client->irq); | |
559 | ||
560 | return 0; | |
561 | } | |
562 | #endif | |
563 | ||
564 | static const struct i2c_device_id max77620_id[] = { | |
565 | {"max77620", MAX77620}, | |
566 | {"max20024", MAX20024}, | |
567 | {}, | |
568 | }; | |
569 | MODULE_DEVICE_TABLE(i2c, max77620_id); | |
570 | ||
571 | static const struct dev_pm_ops max77620_pm_ops = { | |
572 | SET_SYSTEM_SLEEP_PM_OPS(max77620_i2c_suspend, max77620_i2c_resume) | |
573 | }; | |
574 | ||
575 | static struct i2c_driver max77620_driver = { | |
576 | .driver = { | |
577 | .name = "max77620", | |
578 | .pm = &max77620_pm_ops, | |
579 | }, | |
580 | .probe = max77620_probe, | |
581 | .id_table = max77620_id, | |
582 | }; | |
583 | ||
584 | module_i2c_driver(max77620_driver); | |
585 | ||
586 | MODULE_DESCRIPTION("MAX77620/MAX20024 Multi Function Device Core Driver"); | |
587 | MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); | |
588 | MODULE_AUTHOR("Chaitanya Bandi <bandik@nvidia.com>"); | |
589 | MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@nvidia.com>"); | |
590 | MODULE_LICENSE("GPL v2"); |