]>
Commit | Line | Data |
---|---|---|
190420ab SO |
1 | /* |
2 | * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver. | |
3 | * Chip is combined proximity and ambient light sensor. | |
4 | * | |
5 | * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). | |
6 | * | |
7 | * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or | |
10 | * modify it under the terms of the GNU General Public License | |
11 | * version 2 as published by the Free Software Foundation. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, but | |
14 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
16 | * General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
21 | * 02110-1301 USA | |
22 | * | |
23 | */ | |
24 | ||
25 | #include <linux/kernel.h> | |
26 | #include <linux/module.h> | |
27 | #include <linux/i2c.h> | |
28 | #include <linux/interrupt.h> | |
29 | #include <linux/mutex.h> | |
7ae5f10a | 30 | #include <linux/platform_data/bh1770glc.h> |
190420ab SO |
31 | #include <linux/regulator/consumer.h> |
32 | #include <linux/pm_runtime.h> | |
33 | #include <linux/workqueue.h> | |
34 | #include <linux/delay.h> | |
35 | #include <linux/wait.h> | |
36 | #include <linux/slab.h> | |
37 | ||
38 | #define BH1770_ALS_CONTROL 0x80 /* ALS operation mode control */ | |
39 | #define BH1770_PS_CONTROL 0x81 /* PS operation mode control */ | |
40 | #define BH1770_I_LED 0x82 /* active LED and LED1, LED2 current */ | |
41 | #define BH1770_I_LED3 0x83 /* LED3 current setting */ | |
42 | #define BH1770_ALS_PS_MEAS 0x84 /* Forced mode trigger */ | |
43 | #define BH1770_PS_MEAS_RATE 0x85 /* PS meas. rate at stand alone mode */ | |
44 | #define BH1770_ALS_MEAS_RATE 0x86 /* ALS meas. rate at stand alone mode */ | |
45 | #define BH1770_PART_ID 0x8a /* Part number and revision ID */ | |
46 | #define BH1770_MANUFACT_ID 0x8b /* Manufacturerer ID */ | |
47 | #define BH1770_ALS_DATA_0 0x8c /* ALS DATA low byte */ | |
48 | #define BH1770_ALS_DATA_1 0x8d /* ALS DATA high byte */ | |
49 | #define BH1770_ALS_PS_STATUS 0x8e /* Measurement data and int status */ | |
50 | #define BH1770_PS_DATA_LED1 0x8f /* PS data from LED1 */ | |
51 | #define BH1770_PS_DATA_LED2 0x90 /* PS data from LED2 */ | |
52 | #define BH1770_PS_DATA_LED3 0x91 /* PS data from LED3 */ | |
53 | #define BH1770_INTERRUPT 0x92 /* Interrupt setting */ | |
54 | #define BH1770_PS_TH_LED1 0x93 /* PS interrupt threshold for LED1 */ | |
55 | #define BH1770_PS_TH_LED2 0x94 /* PS interrupt threshold for LED2 */ | |
56 | #define BH1770_PS_TH_LED3 0x95 /* PS interrupt threshold for LED3 */ | |
57 | #define BH1770_ALS_TH_UP_0 0x96 /* ALS upper threshold low byte */ | |
58 | #define BH1770_ALS_TH_UP_1 0x97 /* ALS upper threshold high byte */ | |
59 | #define BH1770_ALS_TH_LOW_0 0x98 /* ALS lower threshold low byte */ | |
60 | #define BH1770_ALS_TH_LOW_1 0x99 /* ALS lower threshold high byte */ | |
61 | ||
62 | /* MANUFACT_ID */ | |
63 | #define BH1770_MANUFACT_ROHM 0x01 | |
64 | #define BH1770_MANUFACT_OSRAM 0x03 | |
65 | ||
66 | /* PART_ID */ | |
67 | #define BH1770_PART 0x90 | |
68 | #define BH1770_PART_MASK 0xf0 | |
69 | #define BH1770_REV_MASK 0x0f | |
70 | #define BH1770_REV_SHIFT 0 | |
71 | #define BH1770_REV_0 0x00 | |
72 | #define BH1770_REV_1 0x01 | |
73 | ||
74 | /* Operating modes for both */ | |
75 | #define BH1770_STANDBY 0x00 | |
76 | #define BH1770_FORCED 0x02 | |
77 | #define BH1770_STANDALONE 0x03 | |
78 | #define BH1770_SWRESET (0x01 << 2) | |
79 | ||
80 | #define BH1770_PS_TRIG_MEAS (1 << 0) | |
81 | #define BH1770_ALS_TRIG_MEAS (1 << 1) | |
82 | ||
83 | /* Interrupt control */ | |
84 | #define BH1770_INT_OUTPUT_MODE (1 << 3) /* 0 = latched */ | |
85 | #define BH1770_INT_POLARITY (1 << 2) /* 1 = active high */ | |
86 | #define BH1770_INT_ALS_ENA (1 << 1) | |
87 | #define BH1770_INT_PS_ENA (1 << 0) | |
88 | ||
89 | /* Interrupt status */ | |
90 | #define BH1770_INT_LED1_DATA (1 << 0) | |
91 | #define BH1770_INT_LED1_INT (1 << 1) | |
92 | #define BH1770_INT_LED2_DATA (1 << 2) | |
93 | #define BH1770_INT_LED2_INT (1 << 3) | |
94 | #define BH1770_INT_LED3_DATA (1 << 4) | |
95 | #define BH1770_INT_LED3_INT (1 << 5) | |
96 | #define BH1770_INT_LEDS_INT ((1 << 1) | (1 << 3) | (1 << 5)) | |
97 | #define BH1770_INT_ALS_DATA (1 << 6) | |
98 | #define BH1770_INT_ALS_INT (1 << 7) | |
99 | ||
100 | /* Led channels */ | |
101 | #define BH1770_LED1 0x00 | |
102 | ||
103 | #define BH1770_DISABLE 0 | |
104 | #define BH1770_ENABLE 1 | |
105 | #define BH1770_PROX_CHANNELS 1 | |
106 | ||
107 | #define BH1770_LUX_DEFAULT_RATE 1 /* Index to lux rate table */ | |
108 | #define BH1770_PROX_DEFAULT_RATE 1 /* Direct HW value =~ 50Hz */ | |
109 | #define BH1770_PROX_DEF_RATE_THRESH 6 /* Direct HW value =~ 5 Hz */ | |
110 | #define BH1770_STARTUP_DELAY 50 | |
111 | #define BH1770_RESET_TIME 10 | |
112 | #define BH1770_TIMEOUT 2100 /* Timeout in 2.1 seconds */ | |
113 | ||
114 | #define BH1770_LUX_RANGE 65535 | |
115 | #define BH1770_PROX_RANGE 255 | |
116 | #define BH1770_COEF_SCALER 1024 | |
117 | #define BH1770_CALIB_SCALER 8192 | |
118 | #define BH1770_LUX_NEUTRAL_CALIB_VALUE (1 * BH1770_CALIB_SCALER) | |
119 | #define BH1770_LUX_DEF_THRES 1000 | |
120 | #define BH1770_PROX_DEF_THRES 70 | |
121 | #define BH1770_PROX_DEF_ABS_THRES 100 | |
122 | #define BH1770_DEFAULT_PERSISTENCE 10 | |
123 | #define BH1770_PROX_MAX_PERSISTENCE 50 | |
124 | #define BH1770_LUX_GA_SCALE 16384 | |
125 | #define BH1770_LUX_CF_SCALE 2048 /* CF ChipFactor */ | |
126 | #define BH1770_NEUTRAL_CF BH1770_LUX_CF_SCALE | |
127 | #define BH1770_LUX_CORR_SCALE 4096 | |
128 | ||
129 | #define PROX_ABOVE_THRESHOLD 1 | |
130 | #define PROX_BELOW_THRESHOLD 0 | |
131 | ||
132 | #define PROX_IGNORE_LUX_LIMIT 500 | |
133 | ||
134 | struct bh1770_chip { | |
135 | struct bh1770_platform_data *pdata; | |
136 | char chipname[10]; | |
137 | u8 revision; | |
138 | struct i2c_client *client; | |
139 | struct regulator_bulk_data regs[2]; | |
140 | struct mutex mutex; /* avoid parallel access */ | |
141 | wait_queue_head_t wait; | |
142 | ||
143 | bool int_mode_prox; | |
144 | bool int_mode_lux; | |
145 | struct delayed_work prox_work; | |
146 | u32 lux_cf; /* Chip specific factor */ | |
147 | u32 lux_ga; | |
148 | u32 lux_calib; | |
149 | int lux_rate_index; | |
150 | u32 lux_corr; | |
151 | u16 lux_data_raw; | |
152 | u16 lux_threshold_hi; | |
153 | u16 lux_threshold_lo; | |
154 | u16 lux_thres_hi_onchip; | |
155 | u16 lux_thres_lo_onchip; | |
156 | bool lux_wait_result; | |
157 | ||
158 | int prox_enable_count; | |
159 | u16 prox_coef; | |
160 | u16 prox_const; | |
161 | int prox_rate; | |
162 | int prox_rate_threshold; | |
163 | u8 prox_persistence; | |
164 | u8 prox_persistence_counter; | |
165 | u8 prox_data; | |
166 | u8 prox_threshold; | |
167 | u8 prox_threshold_hw; | |
168 | bool prox_force_update; | |
169 | u8 prox_abs_thres; | |
170 | u8 prox_led; | |
171 | }; | |
172 | ||
173 | static const char reg_vcc[] = "Vcc"; | |
174 | static const char reg_vleds[] = "Vleds"; | |
175 | ||
176 | /* | |
177 | * Supported stand alone rates in ms from chip data sheet | |
178 | * {10, 20, 30, 40, 70, 100, 200, 500, 1000, 2000}; | |
179 | */ | |
180 | static const s16 prox_rates_hz[] = {100, 50, 33, 25, 14, 10, 5, 2}; | |
181 | static const s16 prox_rates_ms[] = {10, 20, 30, 40, 70, 100, 200, 500}; | |
182 | ||
190420ab SO |
183 | /* |
184 | * Supported stand alone rates in ms from chip data sheet | |
185 | * {100, 200, 500, 1000, 2000}; | |
186 | */ | |
187 | static const s16 lux_rates_hz[] = {10, 5, 2, 1, 0}; | |
188 | ||
189 | /* | |
190 | * interrupt control functions are called while keeping chip->mutex | |
191 | * excluding module probe / remove | |
192 | */ | |
193 | static inline int bh1770_lux_interrupt_control(struct bh1770_chip *chip, | |
194 | int lux) | |
195 | { | |
196 | chip->int_mode_lux = lux; | |
197 | /* Set interrupt modes, interrupt active low, latched */ | |
198 | return i2c_smbus_write_byte_data(chip->client, | |
199 | BH1770_INTERRUPT, | |
200 | (lux << 1) | chip->int_mode_prox); | |
201 | } | |
202 | ||
203 | static inline int bh1770_prox_interrupt_control(struct bh1770_chip *chip, | |
204 | int ps) | |
205 | { | |
206 | chip->int_mode_prox = ps; | |
207 | return i2c_smbus_write_byte_data(chip->client, | |
208 | BH1770_INTERRUPT, | |
209 | (chip->int_mode_lux << 1) | (ps << 0)); | |
210 | } | |
211 | ||
212 | /* chip->mutex is always kept here */ | |
213 | static int bh1770_lux_rate(struct bh1770_chip *chip, int rate_index) | |
214 | { | |
215 | /* sysfs may call this when the chip is powered off */ | |
216 | if (pm_runtime_suspended(&chip->client->dev)) | |
217 | return 0; | |
218 | ||
219 | /* Proper proximity response needs fastest lux rate (100ms) */ | |
220 | if (chip->prox_enable_count) | |
221 | rate_index = 0; | |
222 | ||
223 | return i2c_smbus_write_byte_data(chip->client, | |
224 | BH1770_ALS_MEAS_RATE, | |
225 | rate_index); | |
226 | } | |
227 | ||
228 | static int bh1770_prox_rate(struct bh1770_chip *chip, int mode) | |
229 | { | |
230 | int rate; | |
231 | ||
232 | rate = (mode == PROX_ABOVE_THRESHOLD) ? | |
233 | chip->prox_rate_threshold : chip->prox_rate; | |
234 | ||
235 | return i2c_smbus_write_byte_data(chip->client, | |
236 | BH1770_PS_MEAS_RATE, | |
237 | rate); | |
238 | } | |
239 | ||
240 | /* InfraredLED is controlled by the chip during proximity scanning */ | |
241 | static inline int bh1770_led_cfg(struct bh1770_chip *chip) | |
242 | { | |
243 | /* LED cfg, current for leds 1 and 2 */ | |
244 | return i2c_smbus_write_byte_data(chip->client, | |
245 | BH1770_I_LED, | |
246 | (BH1770_LED1 << 6) | | |
247 | (BH1770_LED_5mA << 3) | | |
248 | chip->prox_led); | |
249 | } | |
250 | ||
251 | /* | |
252 | * Following two functions converts raw ps values from HW to normalized | |
253 | * values. Purpose is to compensate differences between different sensor | |
254 | * versions and variants so that result means about the same between | |
255 | * versions. | |
256 | */ | |
257 | static inline u8 bh1770_psraw_to_adjusted(struct bh1770_chip *chip, u8 psraw) | |
258 | { | |
259 | u16 adjusted; | |
260 | adjusted = (u16)(((u32)(psraw + chip->prox_const) * chip->prox_coef) / | |
261 | BH1770_COEF_SCALER); | |
262 | if (adjusted > BH1770_PROX_RANGE) | |
263 | adjusted = BH1770_PROX_RANGE; | |
264 | return adjusted; | |
265 | } | |
266 | ||
267 | static inline u8 bh1770_psadjusted_to_raw(struct bh1770_chip *chip, u8 ps) | |
268 | { | |
269 | u16 raw; | |
270 | ||
271 | raw = (((u32)ps * BH1770_COEF_SCALER) / chip->prox_coef); | |
272 | if (raw > chip->prox_const) | |
273 | raw = raw - chip->prox_const; | |
274 | else | |
275 | raw = 0; | |
276 | return raw; | |
277 | } | |
278 | ||
279 | /* | |
280 | * Following two functions converts raw lux values from HW to normalized | |
281 | * values. Purpose is to compensate differences between different sensor | |
282 | * versions and variants so that result means about the same between | |
283 | * versions. Chip->mutex is kept when this is called. | |
284 | */ | |
285 | static int bh1770_prox_set_threshold(struct bh1770_chip *chip) | |
286 | { | |
287 | u8 tmp = 0; | |
288 | ||
289 | /* sysfs may call this when the chip is powered off */ | |
290 | if (pm_runtime_suspended(&chip->client->dev)) | |
291 | return 0; | |
292 | ||
293 | tmp = bh1770_psadjusted_to_raw(chip, chip->prox_threshold); | |
294 | chip->prox_threshold_hw = tmp; | |
295 | ||
296 | return i2c_smbus_write_byte_data(chip->client, BH1770_PS_TH_LED1, | |
297 | tmp); | |
298 | } | |
299 | ||
300 | static inline u16 bh1770_lux_raw_to_adjusted(struct bh1770_chip *chip, u16 raw) | |
301 | { | |
302 | u32 lux; | |
303 | lux = ((u32)raw * chip->lux_corr) / BH1770_LUX_CORR_SCALE; | |
304 | return min(lux, (u32)BH1770_LUX_RANGE); | |
305 | } | |
306 | ||
307 | static inline u16 bh1770_lux_adjusted_to_raw(struct bh1770_chip *chip, | |
308 | u16 adjusted) | |
309 | { | |
310 | return (u32)adjusted * BH1770_LUX_CORR_SCALE / chip->lux_corr; | |
311 | } | |
312 | ||
313 | /* chip->mutex is kept when this is called */ | |
314 | static int bh1770_lux_update_thresholds(struct bh1770_chip *chip, | |
315 | u16 threshold_hi, u16 threshold_lo) | |
316 | { | |
317 | u8 data[4]; | |
318 | int ret; | |
319 | ||
320 | /* sysfs may call this when the chip is powered off */ | |
321 | if (pm_runtime_suspended(&chip->client->dev)) | |
322 | return 0; | |
323 | ||
324 | /* | |
325 | * Compensate threshold values with the correction factors if not | |
326 | * set to minimum or maximum. | |
327 | * Min & max values disables interrupts. | |
328 | */ | |
329 | if (threshold_hi != BH1770_LUX_RANGE && threshold_hi != 0) | |
330 | threshold_hi = bh1770_lux_adjusted_to_raw(chip, threshold_hi); | |
331 | ||
332 | if (threshold_lo != BH1770_LUX_RANGE && threshold_lo != 0) | |
333 | threshold_lo = bh1770_lux_adjusted_to_raw(chip, threshold_lo); | |
334 | ||
335 | if (chip->lux_thres_hi_onchip == threshold_hi && | |
336 | chip->lux_thres_lo_onchip == threshold_lo) | |
337 | return 0; | |
338 | ||
339 | chip->lux_thres_hi_onchip = threshold_hi; | |
340 | chip->lux_thres_lo_onchip = threshold_lo; | |
341 | ||
342 | data[0] = threshold_hi; | |
343 | data[1] = threshold_hi >> 8; | |
344 | data[2] = threshold_lo; | |
345 | data[3] = threshold_lo >> 8; | |
346 | ||
347 | ret = i2c_smbus_write_i2c_block_data(chip->client, | |
348 | BH1770_ALS_TH_UP_0, | |
349 | ARRAY_SIZE(data), | |
350 | data); | |
351 | return ret; | |
352 | } | |
353 | ||
354 | static int bh1770_lux_get_result(struct bh1770_chip *chip) | |
355 | { | |
356 | u16 data; | |
357 | int ret; | |
358 | ||
359 | ret = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_DATA_0); | |
360 | if (ret < 0) | |
361 | return ret; | |
362 | ||
363 | data = ret & 0xff; | |
364 | ret = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_DATA_1); | |
365 | if (ret < 0) | |
366 | return ret; | |
367 | ||
368 | chip->lux_data_raw = data | ((ret & 0xff) << 8); | |
369 | ||
370 | return 0; | |
371 | } | |
372 | ||
373 | /* Calculate correction value which contains chip and device specific parts */ | |
374 | static u32 bh1770_get_corr_value(struct bh1770_chip *chip) | |
375 | { | |
376 | u32 tmp; | |
377 | /* Impact of glass attenuation correction */ | |
378 | tmp = (BH1770_LUX_CORR_SCALE * chip->lux_ga) / BH1770_LUX_GA_SCALE; | |
379 | /* Impact of chip factor correction */ | |
380 | tmp = (tmp * chip->lux_cf) / BH1770_LUX_CF_SCALE; | |
381 | /* Impact of Device specific calibration correction */ | |
382 | tmp = (tmp * chip->lux_calib) / BH1770_CALIB_SCALER; | |
383 | return tmp; | |
384 | } | |
385 | ||
386 | static int bh1770_lux_read_result(struct bh1770_chip *chip) | |
387 | { | |
388 | bh1770_lux_get_result(chip); | |
389 | return bh1770_lux_raw_to_adjusted(chip, chip->lux_data_raw); | |
390 | } | |
391 | ||
392 | /* | |
393 | * Chip on / off functions are called while keeping mutex except probe | |
394 | * or remove phase | |
395 | */ | |
396 | static int bh1770_chip_on(struct bh1770_chip *chip) | |
397 | { | |
398 | int ret = regulator_bulk_enable(ARRAY_SIZE(chip->regs), | |
399 | chip->regs); | |
400 | if (ret < 0) | |
401 | return ret; | |
402 | ||
403 | usleep_range(BH1770_STARTUP_DELAY, BH1770_STARTUP_DELAY * 2); | |
404 | ||
405 | /* Reset the chip */ | |
406 | i2c_smbus_write_byte_data(chip->client, BH1770_ALS_CONTROL, | |
407 | BH1770_SWRESET); | |
408 | usleep_range(BH1770_RESET_TIME, BH1770_RESET_TIME * 2); | |
409 | ||
410 | /* | |
411 | * ALS is started always since proximity needs als results | |
412 | * for realibility estimation. | |
413 | * Let's assume dark until the first ALS measurement is ready. | |
414 | */ | |
415 | chip->lux_data_raw = 0; | |
416 | chip->prox_data = 0; | |
417 | ret = i2c_smbus_write_byte_data(chip->client, | |
418 | BH1770_ALS_CONTROL, BH1770_STANDALONE); | |
419 | ||
420 | /* Assume reset defaults */ | |
421 | chip->lux_thres_hi_onchip = BH1770_LUX_RANGE; | |
422 | chip->lux_thres_lo_onchip = 0; | |
423 | ||
424 | return ret; | |
425 | } | |
426 | ||
427 | static void bh1770_chip_off(struct bh1770_chip *chip) | |
428 | { | |
429 | i2c_smbus_write_byte_data(chip->client, | |
430 | BH1770_INTERRUPT, BH1770_DISABLE); | |
431 | i2c_smbus_write_byte_data(chip->client, | |
432 | BH1770_ALS_CONTROL, BH1770_STANDBY); | |
433 | i2c_smbus_write_byte_data(chip->client, | |
434 | BH1770_PS_CONTROL, BH1770_STANDBY); | |
435 | regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs); | |
436 | } | |
437 | ||
438 | /* chip->mutex is kept when this is called */ | |
439 | static int bh1770_prox_mode_control(struct bh1770_chip *chip) | |
440 | { | |
441 | if (chip->prox_enable_count) { | |
442 | chip->prox_force_update = true; /* Force immediate update */ | |
443 | ||
444 | bh1770_lux_rate(chip, chip->lux_rate_index); | |
445 | bh1770_prox_set_threshold(chip); | |
446 | bh1770_led_cfg(chip); | |
447 | bh1770_prox_rate(chip, PROX_BELOW_THRESHOLD); | |
448 | bh1770_prox_interrupt_control(chip, BH1770_ENABLE); | |
449 | i2c_smbus_write_byte_data(chip->client, | |
450 | BH1770_PS_CONTROL, BH1770_STANDALONE); | |
451 | } else { | |
452 | chip->prox_data = 0; | |
453 | bh1770_lux_rate(chip, chip->lux_rate_index); | |
454 | bh1770_prox_interrupt_control(chip, BH1770_DISABLE); | |
455 | i2c_smbus_write_byte_data(chip->client, | |
456 | BH1770_PS_CONTROL, BH1770_STANDBY); | |
457 | } | |
458 | return 0; | |
459 | } | |
460 | ||
461 | /* chip->mutex is kept when this is called */ | |
462 | static int bh1770_prox_read_result(struct bh1770_chip *chip) | |
463 | { | |
464 | int ret; | |
465 | bool above; | |
466 | u8 mode; | |
467 | ||
468 | ret = i2c_smbus_read_byte_data(chip->client, BH1770_PS_DATA_LED1); | |
469 | if (ret < 0) | |
470 | goto out; | |
471 | ||
472 | if (ret > chip->prox_threshold_hw) | |
473 | above = true; | |
474 | else | |
475 | above = false; | |
476 | ||
477 | /* | |
478 | * when ALS levels goes above limit, proximity result may be | |
479 | * false proximity. Thus ignore the result. With real proximity | |
480 | * there is a shadow causing low als levels. | |
481 | */ | |
482 | if (chip->lux_data_raw > PROX_IGNORE_LUX_LIMIT) | |
483 | ret = 0; | |
484 | ||
485 | chip->prox_data = bh1770_psraw_to_adjusted(chip, ret); | |
486 | ||
487 | /* Strong proximity level or force mode requires immediate response */ | |
488 | if (chip->prox_data >= chip->prox_abs_thres || | |
489 | chip->prox_force_update) | |
490 | chip->prox_persistence_counter = chip->prox_persistence; | |
491 | ||
492 | chip->prox_force_update = false; | |
493 | ||
494 | /* Persistence filttering to reduce false proximity events */ | |
495 | if (likely(above)) { | |
496 | if (chip->prox_persistence_counter < chip->prox_persistence) { | |
497 | chip->prox_persistence_counter++; | |
498 | ret = -ENODATA; | |
499 | } else { | |
500 | mode = PROX_ABOVE_THRESHOLD; | |
501 | ret = 0; | |
502 | } | |
503 | } else { | |
504 | chip->prox_persistence_counter = 0; | |
505 | mode = PROX_BELOW_THRESHOLD; | |
506 | chip->prox_data = 0; | |
507 | ret = 0; | |
508 | } | |
509 | ||
510 | /* Set proximity detection rate based on above or below value */ | |
511 | if (ret == 0) { | |
512 | bh1770_prox_rate(chip, mode); | |
513 | sysfs_notify(&chip->client->dev.kobj, NULL, "prox0_raw"); | |
514 | } | |
515 | out: | |
516 | return ret; | |
517 | } | |
518 | ||
519 | static int bh1770_detect(struct bh1770_chip *chip) | |
520 | { | |
521 | struct i2c_client *client = chip->client; | |
522 | s32 ret; | |
523 | u8 manu, part; | |
524 | ||
525 | ret = i2c_smbus_read_byte_data(client, BH1770_MANUFACT_ID); | |
526 | if (ret < 0) | |
527 | goto error; | |
528 | manu = (u8)ret; | |
529 | ||
530 | ret = i2c_smbus_read_byte_data(client, BH1770_PART_ID); | |
531 | if (ret < 0) | |
532 | goto error; | |
533 | part = (u8)ret; | |
534 | ||
535 | chip->revision = (part & BH1770_REV_MASK) >> BH1770_REV_SHIFT; | |
536 | chip->prox_coef = BH1770_COEF_SCALER; | |
537 | chip->prox_const = 0; | |
538 | chip->lux_cf = BH1770_NEUTRAL_CF; | |
539 | ||
540 | if ((manu == BH1770_MANUFACT_ROHM) && | |
541 | ((part & BH1770_PART_MASK) == BH1770_PART)) { | |
542 | snprintf(chip->chipname, sizeof(chip->chipname), "BH1770GLC"); | |
543 | return 0; | |
544 | } | |
545 | ||
546 | if ((manu == BH1770_MANUFACT_OSRAM) && | |
547 | ((part & BH1770_PART_MASK) == BH1770_PART)) { | |
548 | snprintf(chip->chipname, sizeof(chip->chipname), "SFH7770"); | |
549 | /* Values selected by comparing different versions */ | |
550 | chip->prox_coef = 819; /* 0.8 * BH1770_COEF_SCALER */ | |
551 | chip->prox_const = 40; | |
552 | return 0; | |
553 | } | |
554 | ||
555 | ret = -ENODEV; | |
556 | error: | |
557 | dev_dbg(&client->dev, "BH1770 or SFH7770 not found\n"); | |
558 | ||
559 | return ret; | |
560 | } | |
561 | ||
562 | /* | |
563 | * This work is re-scheduled at every proximity interrupt. | |
564 | * If this work is running, it means that there hasn't been any | |
565 | * proximity interrupt in time. Situation is handled as no-proximity. | |
566 | * It would be nice to have low-threshold interrupt or interrupt | |
567 | * when measurement and hi-threshold are both 0. But neither of those exists. | |
568 | * This is a workaroud for missing HW feature. | |
569 | */ | |
570 | ||
571 | static void bh1770_prox_work(struct work_struct *work) | |
572 | { | |
573 | struct bh1770_chip *chip = | |
574 | container_of(work, struct bh1770_chip, prox_work.work); | |
575 | ||
576 | mutex_lock(&chip->mutex); | |
577 | bh1770_prox_read_result(chip); | |
578 | mutex_unlock(&chip->mutex); | |
579 | } | |
580 | ||
581 | /* This is threaded irq handler */ | |
582 | static irqreturn_t bh1770_irq(int irq, void *data) | |
583 | { | |
584 | struct bh1770_chip *chip = data; | |
585 | int status; | |
586 | int rate = 0; | |
587 | ||
588 | mutex_lock(&chip->mutex); | |
589 | status = i2c_smbus_read_byte_data(chip->client, BH1770_ALS_PS_STATUS); | |
590 | ||
591 | /* Acknowledge interrupt by reading this register */ | |
592 | i2c_smbus_read_byte_data(chip->client, BH1770_INTERRUPT); | |
593 | ||
594 | /* | |
595 | * Check if there is fresh data available for als. | |
596 | * If this is the very first data, update thresholds after that. | |
597 | */ | |
598 | if (status & BH1770_INT_ALS_DATA) { | |
599 | bh1770_lux_get_result(chip); | |
600 | if (unlikely(chip->lux_wait_result)) { | |
601 | chip->lux_wait_result = false; | |
602 | wake_up(&chip->wait); | |
603 | bh1770_lux_update_thresholds(chip, | |
604 | chip->lux_threshold_hi, | |
605 | chip->lux_threshold_lo); | |
606 | } | |
607 | } | |
608 | ||
609 | /* Disable interrupt logic to guarantee acknowledgement */ | |
610 | i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT, | |
611 | (0 << 1) | (0 << 0)); | |
612 | ||
613 | if ((status & BH1770_INT_ALS_INT)) | |
614 | sysfs_notify(&chip->client->dev.kobj, NULL, "lux0_input"); | |
615 | ||
616 | if (chip->int_mode_prox && (status & BH1770_INT_LEDS_INT)) { | |
617 | rate = prox_rates_ms[chip->prox_rate_threshold]; | |
618 | bh1770_prox_read_result(chip); | |
619 | } | |
620 | ||
621 | /* Re-enable interrupt logic */ | |
622 | i2c_smbus_write_byte_data(chip->client, BH1770_INTERRUPT, | |
623 | (chip->int_mode_lux << 1) | | |
624 | (chip->int_mode_prox << 0)); | |
625 | mutex_unlock(&chip->mutex); | |
626 | ||
627 | /* | |
628 | * Can't cancel work while keeping mutex since the work uses the | |
629 | * same mutex. | |
630 | */ | |
631 | if (rate) { | |
632 | /* | |
633 | * Simulate missing no-proximity interrupt 50ms after the | |
634 | * next expected interrupt time. | |
635 | */ | |
636 | cancel_delayed_work_sync(&chip->prox_work); | |
637 | schedule_delayed_work(&chip->prox_work, | |
638 | msecs_to_jiffies(rate + 50)); | |
639 | } | |
640 | return IRQ_HANDLED; | |
641 | } | |
642 | ||
643 | static ssize_t bh1770_power_state_store(struct device *dev, | |
644 | struct device_attribute *attr, | |
645 | const char *buf, size_t count) | |
646 | { | |
647 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
648 | unsigned long value; | |
aec04288 | 649 | ssize_t ret; |
190420ab | 650 | |
f7b41276 JH |
651 | ret = kstrtoul(buf, 0, &value); |
652 | if (ret) | |
653 | return ret; | |
190420ab SO |
654 | |
655 | mutex_lock(&chip->mutex); | |
656 | if (value) { | |
657 | pm_runtime_get_sync(dev); | |
658 | ||
659 | ret = bh1770_lux_rate(chip, chip->lux_rate_index); | |
aec04288 DC |
660 | if (ret < 0) { |
661 | pm_runtime_put(dev); | |
662 | goto leave; | |
663 | } | |
190420ab | 664 | |
aec04288 | 665 | ret = bh1770_lux_interrupt_control(chip, BH1770_ENABLE); |
190420ab SO |
666 | if (ret < 0) { |
667 | pm_runtime_put(dev); | |
668 | goto leave; | |
669 | } | |
670 | ||
671 | /* This causes interrupt after the next measurement cycle */ | |
672 | bh1770_lux_update_thresholds(chip, BH1770_LUX_DEF_THRES, | |
673 | BH1770_LUX_DEF_THRES); | |
674 | /* Inform that we are waiting for a result from ALS */ | |
675 | chip->lux_wait_result = true; | |
676 | bh1770_prox_mode_control(chip); | |
677 | } else if (!pm_runtime_suspended(dev)) { | |
678 | pm_runtime_put(dev); | |
679 | } | |
680 | ret = count; | |
681 | leave: | |
682 | mutex_unlock(&chip->mutex); | |
683 | return ret; | |
684 | } | |
685 | ||
686 | static ssize_t bh1770_power_state_show(struct device *dev, | |
687 | struct device_attribute *attr, char *buf) | |
688 | { | |
689 | return sprintf(buf, "%d\n", !pm_runtime_suspended(dev)); | |
690 | } | |
691 | ||
692 | static ssize_t bh1770_lux_result_show(struct device *dev, | |
693 | struct device_attribute *attr, char *buf) | |
694 | { | |
695 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
696 | ssize_t ret; | |
697 | long timeout; | |
698 | ||
699 | if (pm_runtime_suspended(dev)) | |
700 | return -EIO; /* Chip is not enabled at all */ | |
701 | ||
702 | timeout = wait_event_interruptible_timeout(chip->wait, | |
703 | !chip->lux_wait_result, | |
704 | msecs_to_jiffies(BH1770_TIMEOUT)); | |
705 | if (!timeout) | |
706 | return -EIO; | |
707 | ||
708 | mutex_lock(&chip->mutex); | |
709 | ret = sprintf(buf, "%d\n", bh1770_lux_read_result(chip)); | |
710 | mutex_unlock(&chip->mutex); | |
711 | ||
712 | return ret; | |
713 | } | |
714 | ||
715 | static ssize_t bh1770_lux_range_show(struct device *dev, | |
716 | struct device_attribute *attr, char *buf) | |
717 | { | |
718 | return sprintf(buf, "%d\n", BH1770_LUX_RANGE); | |
719 | } | |
720 | ||
721 | static ssize_t bh1770_prox_enable_store(struct device *dev, | |
722 | struct device_attribute *attr, | |
723 | const char *buf, size_t count) | |
724 | { | |
725 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
726 | unsigned long value; | |
f7b41276 | 727 | int ret; |
190420ab | 728 | |
f7b41276 JH |
729 | ret = kstrtoul(buf, 0, &value); |
730 | if (ret) | |
731 | return ret; | |
190420ab SO |
732 | |
733 | mutex_lock(&chip->mutex); | |
734 | /* Assume no proximity. Sensor will tell real state soon */ | |
735 | if (!chip->prox_enable_count) | |
736 | chip->prox_data = 0; | |
737 | ||
738 | if (value) | |
739 | chip->prox_enable_count++; | |
740 | else if (chip->prox_enable_count > 0) | |
741 | chip->prox_enable_count--; | |
742 | else | |
743 | goto leave; | |
744 | ||
745 | /* Run control only when chip is powered on */ | |
746 | if (!pm_runtime_suspended(dev)) | |
747 | bh1770_prox_mode_control(chip); | |
748 | leave: | |
749 | mutex_unlock(&chip->mutex); | |
750 | return count; | |
751 | } | |
752 | ||
753 | static ssize_t bh1770_prox_enable_show(struct device *dev, | |
754 | struct device_attribute *attr, char *buf) | |
755 | { | |
756 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
757 | ssize_t len; | |
758 | ||
759 | mutex_lock(&chip->mutex); | |
760 | len = sprintf(buf, "%d\n", chip->prox_enable_count); | |
761 | mutex_unlock(&chip->mutex); | |
762 | return len; | |
763 | } | |
764 | ||
765 | static ssize_t bh1770_prox_result_show(struct device *dev, | |
766 | struct device_attribute *attr, char *buf) | |
767 | { | |
768 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
769 | ssize_t ret; | |
770 | ||
771 | mutex_lock(&chip->mutex); | |
772 | if (chip->prox_enable_count && !pm_runtime_suspended(dev)) | |
773 | ret = sprintf(buf, "%d\n", chip->prox_data); | |
774 | else | |
775 | ret = -EIO; | |
776 | mutex_unlock(&chip->mutex); | |
777 | return ret; | |
778 | } | |
779 | ||
780 | static ssize_t bh1770_prox_range_show(struct device *dev, | |
781 | struct device_attribute *attr, char *buf) | |
782 | { | |
783 | return sprintf(buf, "%d\n", BH1770_PROX_RANGE); | |
784 | } | |
785 | ||
786 | static ssize_t bh1770_get_prox_rate_avail(struct device *dev, | |
787 | struct device_attribute *attr, char *buf) | |
788 | { | |
789 | int i; | |
790 | int pos = 0; | |
791 | for (i = 0; i < ARRAY_SIZE(prox_rates_hz); i++) | |
792 | pos += sprintf(buf + pos, "%d ", prox_rates_hz[i]); | |
793 | sprintf(buf + pos - 1, "\n"); | |
794 | return pos; | |
795 | } | |
796 | ||
797 | static ssize_t bh1770_get_prox_rate_above(struct device *dev, | |
798 | struct device_attribute *attr, char *buf) | |
799 | { | |
800 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
801 | return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate_threshold]); | |
802 | } | |
803 | ||
804 | static ssize_t bh1770_get_prox_rate_below(struct device *dev, | |
805 | struct device_attribute *attr, char *buf) | |
806 | { | |
807 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
808 | return sprintf(buf, "%d\n", prox_rates_hz[chip->prox_rate]); | |
809 | } | |
810 | ||
811 | static int bh1770_prox_rate_validate(int rate) | |
812 | { | |
813 | int i; | |
814 | ||
815 | for (i = 0; i < ARRAY_SIZE(prox_rates_hz) - 1; i++) | |
816 | if (rate >= prox_rates_hz[i]) | |
817 | break; | |
818 | return i; | |
819 | } | |
820 | ||
821 | static ssize_t bh1770_set_prox_rate_above(struct device *dev, | |
822 | struct device_attribute *attr, | |
823 | const char *buf, size_t count) | |
824 | { | |
825 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
826 | unsigned long value; | |
f7b41276 | 827 | int ret; |
190420ab | 828 | |
f7b41276 JH |
829 | ret = kstrtoul(buf, 0, &value); |
830 | if (ret) | |
831 | return ret; | |
190420ab SO |
832 | |
833 | mutex_lock(&chip->mutex); | |
834 | chip->prox_rate_threshold = bh1770_prox_rate_validate(value); | |
835 | mutex_unlock(&chip->mutex); | |
836 | return count; | |
837 | } | |
838 | ||
839 | static ssize_t bh1770_set_prox_rate_below(struct device *dev, | |
840 | struct device_attribute *attr, | |
841 | const char *buf, size_t count) | |
842 | { | |
843 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
844 | unsigned long value; | |
f7b41276 | 845 | int ret; |
190420ab | 846 | |
f7b41276 JH |
847 | ret = kstrtoul(buf, 0, &value); |
848 | if (ret) | |
849 | return ret; | |
190420ab SO |
850 | |
851 | mutex_lock(&chip->mutex); | |
852 | chip->prox_rate = bh1770_prox_rate_validate(value); | |
853 | mutex_unlock(&chip->mutex); | |
854 | return count; | |
855 | } | |
856 | ||
857 | static ssize_t bh1770_get_prox_thres(struct device *dev, | |
858 | struct device_attribute *attr, char *buf) | |
859 | { | |
860 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
861 | return sprintf(buf, "%d\n", chip->prox_threshold); | |
862 | } | |
863 | ||
864 | static ssize_t bh1770_set_prox_thres(struct device *dev, | |
865 | struct device_attribute *attr, | |
866 | const char *buf, size_t count) | |
867 | { | |
868 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
869 | unsigned long value; | |
870 | int ret; | |
871 | ||
f7b41276 JH |
872 | ret = kstrtoul(buf, 0, &value); |
873 | if (ret) | |
874 | return ret; | |
875 | ||
190420ab SO |
876 | if (value > BH1770_PROX_RANGE) |
877 | return -EINVAL; | |
878 | ||
879 | mutex_lock(&chip->mutex); | |
880 | chip->prox_threshold = value; | |
881 | ret = bh1770_prox_set_threshold(chip); | |
882 | mutex_unlock(&chip->mutex); | |
883 | if (ret < 0) | |
884 | return ret; | |
885 | return count; | |
886 | } | |
887 | ||
888 | static ssize_t bh1770_prox_persistence_show(struct device *dev, | |
889 | struct device_attribute *attr, char *buf) | |
890 | { | |
891 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
892 | ||
893 | return sprintf(buf, "%u\n", chip->prox_persistence); | |
894 | } | |
895 | ||
896 | static ssize_t bh1770_prox_persistence_store(struct device *dev, | |
897 | struct device_attribute *attr, | |
898 | const char *buf, size_t len) | |
899 | { | |
900 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
901 | unsigned long value; | |
f7b41276 | 902 | int ret; |
190420ab | 903 | |
f7b41276 JH |
904 | ret = kstrtoul(buf, 0, &value); |
905 | if (ret) | |
906 | return ret; | |
190420ab SO |
907 | |
908 | if (value > BH1770_PROX_MAX_PERSISTENCE) | |
909 | return -EINVAL; | |
910 | ||
911 | chip->prox_persistence = value; | |
912 | ||
913 | return len; | |
914 | } | |
915 | ||
916 | static ssize_t bh1770_prox_abs_thres_show(struct device *dev, | |
917 | struct device_attribute *attr, char *buf) | |
918 | { | |
919 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
920 | return sprintf(buf, "%u\n", chip->prox_abs_thres); | |
921 | } | |
922 | ||
923 | static ssize_t bh1770_prox_abs_thres_store(struct device *dev, | |
924 | struct device_attribute *attr, | |
925 | const char *buf, size_t len) | |
926 | { | |
927 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
928 | unsigned long value; | |
f7b41276 | 929 | int ret; |
190420ab | 930 | |
f7b41276 JH |
931 | ret = kstrtoul(buf, 0, &value); |
932 | if (ret) | |
933 | return ret; | |
190420ab SO |
934 | |
935 | if (value > BH1770_PROX_RANGE) | |
936 | return -EINVAL; | |
937 | ||
938 | chip->prox_abs_thres = value; | |
939 | ||
940 | return len; | |
941 | } | |
942 | ||
943 | static ssize_t bh1770_chip_id_show(struct device *dev, | |
944 | struct device_attribute *attr, char *buf) | |
945 | { | |
946 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
947 | return sprintf(buf, "%s rev %d\n", chip->chipname, chip->revision); | |
948 | } | |
949 | ||
950 | static ssize_t bh1770_lux_calib_default_show(struct device *dev, | |
951 | struct device_attribute *attr, char *buf) | |
952 | { | |
953 | return sprintf(buf, "%u\n", BH1770_CALIB_SCALER); | |
954 | } | |
955 | ||
956 | static ssize_t bh1770_lux_calib_show(struct device *dev, | |
957 | struct device_attribute *attr, char *buf) | |
958 | { | |
959 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
960 | ssize_t len; | |
961 | ||
962 | mutex_lock(&chip->mutex); | |
963 | len = sprintf(buf, "%u\n", chip->lux_calib); | |
964 | mutex_unlock(&chip->mutex); | |
965 | return len; | |
966 | } | |
967 | ||
968 | static ssize_t bh1770_lux_calib_store(struct device *dev, | |
969 | struct device_attribute *attr, | |
970 | const char *buf, size_t len) | |
971 | { | |
972 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
973 | unsigned long value; | |
974 | u32 old_calib; | |
975 | u32 new_corr; | |
f7b41276 | 976 | int ret; |
190420ab | 977 | |
f7b41276 JH |
978 | ret = kstrtoul(buf, 0, &value); |
979 | if (ret) | |
980 | return ret; | |
190420ab SO |
981 | |
982 | mutex_lock(&chip->mutex); | |
983 | old_calib = chip->lux_calib; | |
984 | chip->lux_calib = value; | |
985 | new_corr = bh1770_get_corr_value(chip); | |
986 | if (new_corr == 0) { | |
987 | chip->lux_calib = old_calib; | |
988 | mutex_unlock(&chip->mutex); | |
989 | return -EINVAL; | |
990 | } | |
991 | chip->lux_corr = new_corr; | |
992 | /* Refresh thresholds on HW after changing correction value */ | |
993 | bh1770_lux_update_thresholds(chip, chip->lux_threshold_hi, | |
994 | chip->lux_threshold_lo); | |
995 | ||
996 | mutex_unlock(&chip->mutex); | |
997 | ||
998 | return len; | |
999 | } | |
1000 | ||
1001 | static ssize_t bh1770_get_lux_rate_avail(struct device *dev, | |
1002 | struct device_attribute *attr, char *buf) | |
1003 | { | |
1004 | int i; | |
1005 | int pos = 0; | |
1006 | for (i = 0; i < ARRAY_SIZE(lux_rates_hz); i++) | |
1007 | pos += sprintf(buf + pos, "%d ", lux_rates_hz[i]); | |
1008 | sprintf(buf + pos - 1, "\n"); | |
1009 | return pos; | |
1010 | } | |
1011 | ||
1012 | static ssize_t bh1770_get_lux_rate(struct device *dev, | |
1013 | struct device_attribute *attr, char *buf) | |
1014 | { | |
1015 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
1016 | return sprintf(buf, "%d\n", lux_rates_hz[chip->lux_rate_index]); | |
1017 | } | |
1018 | ||
1019 | static ssize_t bh1770_set_lux_rate(struct device *dev, | |
1020 | struct device_attribute *attr, | |
1021 | const char *buf, size_t count) | |
1022 | { | |
1023 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
1024 | unsigned long rate_hz; | |
1025 | int ret, i; | |
1026 | ||
f7b41276 JH |
1027 | ret = kstrtoul(buf, 0, &rate_hz); |
1028 | if (ret) | |
1029 | return ret; | |
190420ab SO |
1030 | |
1031 | for (i = 0; i < ARRAY_SIZE(lux_rates_hz) - 1; i++) | |
1032 | if (rate_hz >= lux_rates_hz[i]) | |
1033 | break; | |
1034 | ||
1035 | mutex_lock(&chip->mutex); | |
1036 | chip->lux_rate_index = i; | |
1037 | ret = bh1770_lux_rate(chip, i); | |
1038 | mutex_unlock(&chip->mutex); | |
1039 | ||
1040 | if (ret < 0) | |
1041 | return ret; | |
1042 | ||
1043 | return count; | |
1044 | } | |
1045 | ||
1046 | static ssize_t bh1770_get_lux_thresh_above(struct device *dev, | |
1047 | struct device_attribute *attr, char *buf) | |
1048 | { | |
1049 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
1050 | return sprintf(buf, "%d\n", chip->lux_threshold_hi); | |
1051 | } | |
1052 | ||
1053 | static ssize_t bh1770_get_lux_thresh_below(struct device *dev, | |
1054 | struct device_attribute *attr, char *buf) | |
1055 | { | |
1056 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
1057 | return sprintf(buf, "%d\n", chip->lux_threshold_lo); | |
1058 | } | |
1059 | ||
1060 | static ssize_t bh1770_set_lux_thresh(struct bh1770_chip *chip, u16 *target, | |
1061 | const char *buf) | |
1062 | { | |
190420ab | 1063 | unsigned long thresh; |
f7b41276 | 1064 | int ret; |
190420ab | 1065 | |
f7b41276 JH |
1066 | ret = kstrtoul(buf, 0, &thresh); |
1067 | if (ret) | |
1068 | return ret; | |
190420ab SO |
1069 | |
1070 | if (thresh > BH1770_LUX_RANGE) | |
1071 | return -EINVAL; | |
1072 | ||
1073 | mutex_lock(&chip->mutex); | |
1074 | *target = thresh; | |
1075 | /* | |
1076 | * Don't update values in HW if we are still waiting for | |
1077 | * first interrupt to come after device handle open call. | |
1078 | */ | |
1079 | if (!chip->lux_wait_result) | |
1080 | ret = bh1770_lux_update_thresholds(chip, | |
1081 | chip->lux_threshold_hi, | |
1082 | chip->lux_threshold_lo); | |
1083 | mutex_unlock(&chip->mutex); | |
1084 | return ret; | |
1085 | ||
1086 | } | |
1087 | ||
1088 | static ssize_t bh1770_set_lux_thresh_above(struct device *dev, | |
1089 | struct device_attribute *attr, | |
1090 | const char *buf, size_t len) | |
1091 | { | |
1092 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
1093 | int ret = bh1770_set_lux_thresh(chip, &chip->lux_threshold_hi, buf); | |
1094 | if (ret < 0) | |
1095 | return ret; | |
1096 | return len; | |
1097 | } | |
1098 | ||
1099 | static ssize_t bh1770_set_lux_thresh_below(struct device *dev, | |
1100 | struct device_attribute *attr, | |
1101 | const char *buf, size_t len) | |
1102 | { | |
1103 | struct bh1770_chip *chip = dev_get_drvdata(dev); | |
1104 | int ret = bh1770_set_lux_thresh(chip, &chip->lux_threshold_lo, buf); | |
1105 | if (ret < 0) | |
1106 | return ret; | |
1107 | return len; | |
1108 | } | |
1109 | ||
1110 | static DEVICE_ATTR(prox0_raw_en, S_IRUGO | S_IWUSR, bh1770_prox_enable_show, | |
1111 | bh1770_prox_enable_store); | |
1112 | static DEVICE_ATTR(prox0_thresh_above1_value, S_IRUGO | S_IWUSR, | |
1113 | bh1770_prox_abs_thres_show, | |
1114 | bh1770_prox_abs_thres_store); | |
1115 | static DEVICE_ATTR(prox0_thresh_above0_value, S_IRUGO | S_IWUSR, | |
1116 | bh1770_get_prox_thres, | |
1117 | bh1770_set_prox_thres); | |
1118 | static DEVICE_ATTR(prox0_raw, S_IRUGO, bh1770_prox_result_show, NULL); | |
1119 | static DEVICE_ATTR(prox0_sensor_range, S_IRUGO, bh1770_prox_range_show, NULL); | |
1120 | static DEVICE_ATTR(prox0_thresh_above_count, S_IRUGO | S_IWUSR, | |
1121 | bh1770_prox_persistence_show, | |
1122 | bh1770_prox_persistence_store); | |
1123 | static DEVICE_ATTR(prox0_rate_above, S_IRUGO | S_IWUSR, | |
1124 | bh1770_get_prox_rate_above, | |
1125 | bh1770_set_prox_rate_above); | |
1126 | static DEVICE_ATTR(prox0_rate_below, S_IRUGO | S_IWUSR, | |
1127 | bh1770_get_prox_rate_below, | |
1128 | bh1770_set_prox_rate_below); | |
1129 | static DEVICE_ATTR(prox0_rate_avail, S_IRUGO, bh1770_get_prox_rate_avail, NULL); | |
1130 | ||
1131 | static DEVICE_ATTR(lux0_calibscale, S_IRUGO | S_IWUSR, bh1770_lux_calib_show, | |
1132 | bh1770_lux_calib_store); | |
1133 | static DEVICE_ATTR(lux0_calibscale_default, S_IRUGO, | |
1134 | bh1770_lux_calib_default_show, | |
1135 | NULL); | |
1136 | static DEVICE_ATTR(lux0_input, S_IRUGO, bh1770_lux_result_show, NULL); | |
1137 | static DEVICE_ATTR(lux0_sensor_range, S_IRUGO, bh1770_lux_range_show, NULL); | |
1138 | static DEVICE_ATTR(lux0_rate, S_IRUGO | S_IWUSR, bh1770_get_lux_rate, | |
1139 | bh1770_set_lux_rate); | |
1140 | static DEVICE_ATTR(lux0_rate_avail, S_IRUGO, bh1770_get_lux_rate_avail, NULL); | |
1141 | static DEVICE_ATTR(lux0_thresh_above_value, S_IRUGO | S_IWUSR, | |
1142 | bh1770_get_lux_thresh_above, | |
1143 | bh1770_set_lux_thresh_above); | |
1144 | static DEVICE_ATTR(lux0_thresh_below_value, S_IRUGO | S_IWUSR, | |
1145 | bh1770_get_lux_thresh_below, | |
1146 | bh1770_set_lux_thresh_below); | |
1147 | static DEVICE_ATTR(chip_id, S_IRUGO, bh1770_chip_id_show, NULL); | |
1148 | static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR, bh1770_power_state_show, | |
1149 | bh1770_power_state_store); | |
1150 | ||
1151 | ||
1152 | static struct attribute *sysfs_attrs[] = { | |
1153 | &dev_attr_lux0_calibscale.attr, | |
1154 | &dev_attr_lux0_calibscale_default.attr, | |
1155 | &dev_attr_lux0_input.attr, | |
1156 | &dev_attr_lux0_sensor_range.attr, | |
1157 | &dev_attr_lux0_rate.attr, | |
1158 | &dev_attr_lux0_rate_avail.attr, | |
1159 | &dev_attr_lux0_thresh_above_value.attr, | |
1160 | &dev_attr_lux0_thresh_below_value.attr, | |
1161 | &dev_attr_prox0_raw.attr, | |
1162 | &dev_attr_prox0_sensor_range.attr, | |
1163 | &dev_attr_prox0_raw_en.attr, | |
1164 | &dev_attr_prox0_thresh_above_count.attr, | |
1165 | &dev_attr_prox0_rate_above.attr, | |
1166 | &dev_attr_prox0_rate_below.attr, | |
1167 | &dev_attr_prox0_rate_avail.attr, | |
1168 | &dev_attr_prox0_thresh_above0_value.attr, | |
1169 | &dev_attr_prox0_thresh_above1_value.attr, | |
1170 | &dev_attr_chip_id.attr, | |
1171 | &dev_attr_power_state.attr, | |
1172 | NULL | |
1173 | }; | |
1174 | ||
0690ee2b | 1175 | static const struct attribute_group bh1770_attribute_group = { |
190420ab SO |
1176 | .attrs = sysfs_attrs |
1177 | }; | |
1178 | ||
80c8ae28 | 1179 | static int bh1770_probe(struct i2c_client *client, |
190420ab SO |
1180 | const struct i2c_device_id *id) |
1181 | { | |
1182 | struct bh1770_chip *chip; | |
1183 | int err; | |
1184 | ||
4734e390 | 1185 | chip = devm_kzalloc(&client->dev, sizeof *chip, GFP_KERNEL); |
190420ab SO |
1186 | if (!chip) |
1187 | return -ENOMEM; | |
1188 | ||
1189 | i2c_set_clientdata(client, chip); | |
1190 | chip->client = client; | |
1191 | ||
1192 | mutex_init(&chip->mutex); | |
1193 | init_waitqueue_head(&chip->wait); | |
1194 | INIT_DELAYED_WORK(&chip->prox_work, bh1770_prox_work); | |
1195 | ||
1196 | if (client->dev.platform_data == NULL) { | |
1197 | dev_err(&client->dev, "platform data is mandatory\n"); | |
4734e390 | 1198 | return -EINVAL; |
190420ab SO |
1199 | } |
1200 | ||
1201 | chip->pdata = client->dev.platform_data; | |
1202 | chip->lux_calib = BH1770_LUX_NEUTRAL_CALIB_VALUE; | |
1203 | chip->lux_rate_index = BH1770_LUX_DEFAULT_RATE; | |
1204 | chip->lux_threshold_lo = BH1770_LUX_DEF_THRES; | |
1205 | chip->lux_threshold_hi = BH1770_LUX_DEF_THRES; | |
1206 | ||
1207 | if (chip->pdata->glass_attenuation == 0) | |
1208 | chip->lux_ga = BH1770_NEUTRAL_GA; | |
1209 | else | |
1210 | chip->lux_ga = chip->pdata->glass_attenuation; | |
1211 | ||
1212 | chip->prox_threshold = BH1770_PROX_DEF_THRES; | |
1213 | chip->prox_led = chip->pdata->led_def_curr; | |
1214 | chip->prox_abs_thres = BH1770_PROX_DEF_ABS_THRES; | |
1215 | chip->prox_persistence = BH1770_DEFAULT_PERSISTENCE; | |
1216 | chip->prox_rate_threshold = BH1770_PROX_DEF_RATE_THRESH; | |
1217 | chip->prox_rate = BH1770_PROX_DEFAULT_RATE; | |
1218 | chip->prox_data = 0; | |
1219 | ||
1220 | chip->regs[0].supply = reg_vcc; | |
1221 | chip->regs[1].supply = reg_vleds; | |
1222 | ||
4734e390 HS |
1223 | err = devm_regulator_bulk_get(&client->dev, |
1224 | ARRAY_SIZE(chip->regs), chip->regs); | |
190420ab SO |
1225 | if (err < 0) { |
1226 | dev_err(&client->dev, "Cannot get regulators\n"); | |
4734e390 | 1227 | return err; |
190420ab SO |
1228 | } |
1229 | ||
1230 | err = regulator_bulk_enable(ARRAY_SIZE(chip->regs), | |
1231 | chip->regs); | |
1232 | if (err < 0) { | |
1233 | dev_err(&client->dev, "Cannot enable regulators\n"); | |
4734e390 | 1234 | return err; |
190420ab SO |
1235 | } |
1236 | ||
1237 | usleep_range(BH1770_STARTUP_DELAY, BH1770_STARTUP_DELAY * 2); | |
1238 | err = bh1770_detect(chip); | |
1239 | if (err < 0) | |
4734e390 | 1240 | goto fail0; |
190420ab SO |
1241 | |
1242 | /* Start chip */ | |
1243 | bh1770_chip_on(chip); | |
1244 | pm_runtime_set_active(&client->dev); | |
1245 | pm_runtime_enable(&client->dev); | |
1246 | ||
1247 | chip->lux_corr = bh1770_get_corr_value(chip); | |
1248 | if (chip->lux_corr == 0) { | |
1249 | dev_err(&client->dev, "Improper correction values\n"); | |
1250 | err = -EINVAL; | |
4734e390 | 1251 | goto fail0; |
190420ab SO |
1252 | } |
1253 | ||
1254 | if (chip->pdata->setup_resources) { | |
1255 | err = chip->pdata->setup_resources(); | |
1256 | if (err) { | |
1257 | err = -EINVAL; | |
4734e390 | 1258 | goto fail0; |
190420ab SO |
1259 | } |
1260 | } | |
1261 | ||
1262 | err = sysfs_create_group(&chip->client->dev.kobj, | |
1263 | &bh1770_attribute_group); | |
1264 | if (err < 0) { | |
1265 | dev_err(&chip->client->dev, "Sysfs registration failed\n"); | |
4734e390 | 1266 | goto fail1; |
190420ab SO |
1267 | } |
1268 | ||
1269 | /* | |
1270 | * Chip needs level triggered interrupt to work. However, | |
1271 | * level triggering doesn't work always correctly with power | |
1272 | * management. Select both | |
1273 | */ | |
1274 | err = request_threaded_irq(client->irq, NULL, | |
1275 | bh1770_irq, | |
1276 | IRQF_TRIGGER_FALLING | IRQF_ONESHOT | | |
1277 | IRQF_TRIGGER_LOW, | |
1278 | "bh1770", chip); | |
1279 | if (err) { | |
1280 | dev_err(&client->dev, "could not get IRQ %d\n", | |
1281 | client->irq); | |
4734e390 | 1282 | goto fail2; |
190420ab SO |
1283 | } |
1284 | regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs); | |
1285 | return err; | |
4734e390 | 1286 | fail2: |
190420ab SO |
1287 | sysfs_remove_group(&chip->client->dev.kobj, |
1288 | &bh1770_attribute_group); | |
4734e390 | 1289 | fail1: |
190420ab SO |
1290 | if (chip->pdata->release_resources) |
1291 | chip->pdata->release_resources(); | |
4734e390 | 1292 | fail0: |
190420ab | 1293 | regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs); |
190420ab SO |
1294 | return err; |
1295 | } | |
1296 | ||
486a5c28 | 1297 | static int bh1770_remove(struct i2c_client *client) |
190420ab SO |
1298 | { |
1299 | struct bh1770_chip *chip = i2c_get_clientdata(client); | |
1300 | ||
1301 | free_irq(client->irq, chip); | |
1302 | ||
1303 | sysfs_remove_group(&chip->client->dev.kobj, | |
1304 | &bh1770_attribute_group); | |
1305 | ||
1306 | if (chip->pdata->release_resources) | |
1307 | chip->pdata->release_resources(); | |
1308 | ||
1309 | cancel_delayed_work_sync(&chip->prox_work); | |
1310 | ||
1311 | if (!pm_runtime_suspended(&client->dev)) | |
1312 | bh1770_chip_off(chip); | |
1313 | ||
1314 | pm_runtime_disable(&client->dev); | |
1315 | pm_runtime_set_suspended(&client->dev); | |
1316 | ||
190420ab SO |
1317 | return 0; |
1318 | } | |
1319 | ||
0ca19d6f | 1320 | #ifdef CONFIG_PM_SLEEP |
190420ab SO |
1321 | static int bh1770_suspend(struct device *dev) |
1322 | { | |
8c99d8e6 | 1323 | struct i2c_client *client = to_i2c_client(dev); |
190420ab SO |
1324 | struct bh1770_chip *chip = i2c_get_clientdata(client); |
1325 | ||
1326 | bh1770_chip_off(chip); | |
1327 | ||
1328 | return 0; | |
1329 | } | |
1330 | ||
1331 | static int bh1770_resume(struct device *dev) | |
1332 | { | |
8c99d8e6 | 1333 | struct i2c_client *client = to_i2c_client(dev); |
190420ab SO |
1334 | struct bh1770_chip *chip = i2c_get_clientdata(client); |
1335 | int ret = 0; | |
1336 | ||
1337 | bh1770_chip_on(chip); | |
1338 | ||
1339 | if (!pm_runtime_suspended(dev)) { | |
1340 | /* | |
1341 | * If we were enabled at suspend time, it is expected | |
1342 | * everything works nice and smoothly | |
1343 | */ | |
1344 | ret = bh1770_lux_rate(chip, chip->lux_rate_index); | |
1345 | ret |= bh1770_lux_interrupt_control(chip, BH1770_ENABLE); | |
1346 | ||
1347 | /* This causes interrupt after the next measurement cycle */ | |
1348 | bh1770_lux_update_thresholds(chip, BH1770_LUX_DEF_THRES, | |
1349 | BH1770_LUX_DEF_THRES); | |
1350 | /* Inform that we are waiting for a result from ALS */ | |
1351 | chip->lux_wait_result = true; | |
1352 | bh1770_prox_mode_control(chip); | |
1353 | } | |
1354 | return ret; | |
1355 | } | |
190420ab SO |
1356 | #endif |
1357 | ||
bbd6d050 | 1358 | #ifdef CONFIG_PM |
190420ab SO |
1359 | static int bh1770_runtime_suspend(struct device *dev) |
1360 | { | |
8c99d8e6 | 1361 | struct i2c_client *client = to_i2c_client(dev); |
190420ab SO |
1362 | struct bh1770_chip *chip = i2c_get_clientdata(client); |
1363 | ||
1364 | bh1770_chip_off(chip); | |
1365 | ||
1366 | return 0; | |
1367 | } | |
1368 | ||
1369 | static int bh1770_runtime_resume(struct device *dev) | |
1370 | { | |
8c99d8e6 | 1371 | struct i2c_client *client = to_i2c_client(dev); |
190420ab SO |
1372 | struct bh1770_chip *chip = i2c_get_clientdata(client); |
1373 | ||
1374 | bh1770_chip_on(chip); | |
1375 | ||
1376 | return 0; | |
1377 | } | |
1378 | #endif | |
1379 | ||
1380 | static const struct i2c_device_id bh1770_id[] = { | |
1381 | {"bh1770glc", 0 }, | |
1382 | {"sfh7770", 0 }, | |
1383 | {} | |
1384 | }; | |
1385 | ||
1386 | MODULE_DEVICE_TABLE(i2c, bh1770_id); | |
1387 | ||
1388 | static const struct dev_pm_ops bh1770_pm_ops = { | |
1389 | SET_SYSTEM_SLEEP_PM_OPS(bh1770_suspend, bh1770_resume) | |
1390 | SET_RUNTIME_PM_OPS(bh1770_runtime_suspend, bh1770_runtime_resume, NULL) | |
1391 | }; | |
1392 | ||
1393 | static struct i2c_driver bh1770_driver = { | |
1394 | .driver = { | |
1395 | .name = "bh1770glc", | |
190420ab SO |
1396 | .pm = &bh1770_pm_ops, |
1397 | }, | |
1398 | .probe = bh1770_probe, | |
2d6bed9c | 1399 | .remove = bh1770_remove, |
190420ab SO |
1400 | .id_table = bh1770_id, |
1401 | }; | |
1402 | ||
a64fe2ed | 1403 | module_i2c_driver(bh1770_driver); |
190420ab SO |
1404 | |
1405 | MODULE_DESCRIPTION("BH1770GLC / SFH7770 combined ALS and proximity sensor"); | |
1406 | MODULE_AUTHOR("Samu Onkalo, Nokia Corporation"); | |
1407 | MODULE_LICENSE("GPL v2"); |