]>
Commit | Line | Data |
---|---|---|
1c6a0718 PO |
1 | # |
2 | # MMC/SD host controller drivers | |
3 | # | |
4 | ||
57105737 | 5 | comment "MMC/SD/SDIO Host Controller Drivers" |
1c6a0718 PO |
6 | |
7 | config MMC_ARMMMCI | |
8 | tristate "ARM AMBA Multimedia Card Interface support" | |
790864dc | 9 | depends on ARM_AMBA |
1c6a0718 PO |
10 | help |
11 | This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card | |
12 | Interface (PL180 and PL181) support. If you have an ARM(R) | |
13 | platform with a Multimedia Card slot, say Y or M here. | |
14 | ||
15 | If unsure, say N. | |
16 | ||
17 | config MMC_PXA | |
18 | tristate "Intel PXA25x/26x/27x Multimedia Card Interface support" | |
790864dc | 19 | depends on ARCH_PXA |
1c6a0718 PO |
20 | help |
21 | This selects the Intel(R) PXA(R) Multimedia card Interface. | |
22 | If you have a PXA(R) platform with a Multimedia Card slot, | |
23 | say Y or M here. | |
24 | ||
25 | If unsure, say N. | |
26 | ||
27 | config MMC_SDHCI | |
34671dc2 | 28 | tristate "Secure Digital Host Controller Interface support" |
b8c86fc5 | 29 | depends on HAS_DMA |
1c6a0718 | 30 | help |
b8c86fc5 | 31 | This selects the generic Secure Digital Host Controller Interface. |
1c6a0718 PO |
32 | It is used by manufacturers such as Texas Instruments(R), Ricoh(R) |
33 | and Toshiba(R). Most controllers found in laptops are of this type. | |
b8c86fc5 PO |
34 | |
35 | If you have a controller with this interface, say Y or M here. You | |
36 | also need to enable an appropriate bus interface. | |
37 | ||
38 | If unsure, say N. | |
39 | ||
4e4141a5 AV |
40 | config MMC_SDHCI_IO_ACCESSORS |
41 | bool | |
42 | depends on MMC_SDHCI | |
43 | help | |
44 | This is silent Kconfig symbol that is selected by the drivers that | |
45 | need to overwrite SDHCI IO memory accessors. | |
46 | ||
7657c3a7 AH |
47 | config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER |
48 | bool | |
49 | select MMC_SDHCI_IO_ACCESSORS | |
50 | help | |
51 | This option is selected by drivers running on big endian hosts | |
52 | and performing I/O to a SDHCI controller through a bus that | |
53 | implements a hardware byte swapper using a 32-bit datum. | |
54 | This endian mapping mode is called "data invariance" and | |
55 | has the effect of scrambling the addresses and formats of data | |
56 | accessed in sizes other than the datum size. | |
57 | ||
1144ab5d | 58 | This is the case for the Freescale eSDHC and Nintendo Wii SDHCI. |
7657c3a7 | 59 | |
b8c86fc5 PO |
60 | config MMC_SDHCI_PCI |
61 | tristate "SDHCI support on PCI bus" | |
62 | depends on MMC_SDHCI && PCI | |
63 | help | |
64 | This selects the PCI Secure Digital Host Controller Interface. | |
65 | Most controllers found today are PCI devices. | |
66 | ||
1c6a0718 PO |
67 | If you have a controller with this interface, say Y or M here. |
68 | ||
69 | If unsure, say N. | |
70 | ||
5ae70296 | 71 | config MMC_RICOH_MMC |
03cd8f7e | 72 | bool "Ricoh MMC Controller Disabler (EXPERIMENTAL)" |
b8c86fc5 | 73 | depends on MMC_SDHCI_PCI |
5ae70296 | 74 | help |
03cd8f7e | 75 | This adds a pci quirk to disable Ricoh MMC Controller. This |
5ae70296 PL |
76 | proprietary controller is unnecessary because the SDHCI driver |
77 | supports MMC cards on the SD controller, but if it is not | |
78 | disabled, it will steal the MMC cards away - rendering them | |
03cd8f7e | 79 | useless. It is safe to select this even if you don't |
5ae70296 PL |
80 | have a Ricoh based card reader. |
81 | ||
5ae70296 PL |
82 | If unsure, say Y. |
83 | ||
3085e9c1 AV |
84 | config MMC_SDHCI_OF |
85 | tristate "SDHCI support on OpenFirmware platforms" | |
236cdc7b | 86 | depends on MMC_SDHCI && OF |
3085e9c1 AV |
87 | help |
88 | This selects the OF support for Secure Digital Host Controller | |
7657c3a7 AH |
89 | Interfaces. |
90 | ||
91 | If unsure, say N. | |
92 | ||
93 | config MMC_SDHCI_OF_ESDHC | |
94 | bool "SDHCI OF support for the Freescale eSDHC controller" | |
95 | depends on MMC_SDHCI_OF | |
236cdc7b | 96 | depends on PPC_OF |
7657c3a7 AH |
97 | select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER |
98 | help | |
99 | This selects the Freescale eSDHC controller support. | |
3085e9c1 AV |
100 | |
101 | If unsure, say N. | |
102 | ||
1144ab5d AH |
103 | config MMC_SDHCI_OF_HLWD |
104 | bool "SDHCI OF support for the Nintendo Wii SDHCI controllers" | |
105 | depends on MMC_SDHCI_OF | |
236cdc7b | 106 | depends on PPC_OF |
1144ab5d AH |
107 | select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER |
108 | help | |
109 | This selects the Secure Digital Host Controller Interface (SDHCI) | |
110 | found in the "Hollywood" chipset of the Nintendo Wii video game | |
111 | console. | |
112 | ||
113 | If unsure, say N. | |
114 | ||
a3456a2d RR |
115 | config MMC_SDHCI_PLTFM |
116 | tristate "SDHCI support on the platform specific bus" | |
117 | depends on MMC_SDHCI | |
118 | help | |
119 | This selects the platform specific bus support for Secure Digital Host | |
120 | Controller Interface. | |
121 | ||
122 | If you have a controller with this interface, say Y or M here. | |
123 | ||
124 | If unsure, say N. | |
125 | ||
20b1597b AV |
126 | config MMC_SDHCI_CNS3XXX |
127 | bool "SDHCI support on the Cavium Networks CNS3xxx SoC" | |
128 | depends on ARCH_CNS3XXX | |
129 | depends on MMC_SDHCI_PLTFM | |
130 | help | |
131 | This selects the SDHCI support for CNS3xxx System-on-Chip devices. | |
132 | ||
133 | If unsure, say N. | |
134 | ||
95f25efe WS |
135 | config MMC_SDHCI_ESDHC_IMX |
136 | bool "SDHCI platform support for the Freescale eSDHC i.MX controller" | |
137 | depends on MMC_SDHCI_PLTFM && (ARCH_MX25 || ARCH_MX35 || ARCH_MX5) | |
138 | select MMC_SDHCI_IO_ACCESSORS | |
139 | help | |
140 | This selects the Freescale eSDHC controller support on the platform | |
141 | bus, found on platforms like mx35/51. | |
142 | ||
143 | If unsure, say N. | |
144 | ||
985b1aa0 MR |
145 | config MMC_SDHCI_DOVE |
146 | bool "SDHCI support on Marvell's Dove SoC" | |
147 | depends on ARCH_DOVE | |
148 | depends on MMC_SDHCI_PLTFM | |
149 | select MMC_SDHCI_IO_ACCESSORS | |
150 | help | |
151 | This selects the Secure Digital Host Controller Interface in | |
152 | Marvell's Dove SoC. | |
153 | ||
154 | If unsure, say N. | |
155 | ||
03d2bfc8 | 156 | config MMC_SDHCI_TEGRA |
766a6bf6 | 157 | bool "SDHCI platform support for the Tegra SD/MMC Controller" |
03d2bfc8 OJ |
158 | depends on MMC_SDHCI_PLTFM && ARCH_TEGRA |
159 | select MMC_SDHCI_IO_ACCESSORS | |
160 | help | |
161 | This selects the Tegra SD/MMC controller. If you have a Tegra | |
162 | platform with SD or MMC devices, say Y or M here. | |
163 | ||
164 | If unsure, say N. | |
165 | ||
0d1bb41a BD |
166 | config MMC_SDHCI_S3C |
167 | tristate "SDHCI support on Samsung S3C SoC" | |
930a6f70 | 168 | depends on MMC_SDHCI && PLAT_SAMSUNG |
0d1bb41a BD |
169 | help |
170 | This selects the Secure Digital Host Controller Interface (SDHCI) | |
171 | often referrered to as the HSMMC block in some of the Samsung S3C | |
172 | range of SoC. | |
173 | ||
174 | Note, due to the problems with DMA, the DMA support is only | |
175 | available with CONFIG_EXPERIMENTAL is selected. | |
176 | ||
177 | If you have a controller with this interface, say Y or M here. | |
178 | ||
179 | If unsure, say N. | |
180 | ||
536ac998 ZG |
181 | config MMC_SDHCI_PXA |
182 | tristate "Marvell PXA168/PXA910/MMP2 SD Host Controller support" | |
183 | depends on ARCH_PXA || ARCH_MMP | |
184 | select MMC_SDHCI | |
185 | select MMC_SDHCI_IO_ACCESSORS | |
186 | help | |
187 | This selects the Marvell(R) PXA168/PXA910/MMP2 SD Host Controller. | |
188 | If you have a PXA168/PXA910/MMP2 platform with SD Host Controller | |
189 | and a card slot, say Y or M here. | |
190 | ||
191 | If unsure, say N. | |
192 | ||
c63b3cba VK |
193 | config MMC_SDHCI_SPEAR |
194 | tristate "SDHCI support on ST SPEAr platform" | |
195 | depends on MMC_SDHCI && PLAT_SPEAR | |
196 | help | |
197 | This selects the Secure Digital Host Controller Interface (SDHCI) | |
198 | often referrered to as the HSMMC block in some of the ST SPEAR range | |
199 | of SoC | |
200 | ||
201 | If you have a controller with this interface, say Y or M here. | |
202 | ||
203 | If unsure, say N. | |
204 | ||
0d1bb41a BD |
205 | config MMC_SDHCI_S3C_DMA |
206 | bool "DMA support on S3C SDHCI" | |
207 | depends on MMC_SDHCI_S3C && EXPERIMENTAL | |
208 | help | |
209 | Enable DMA support on the Samsung S3C SDHCI glue. The DMA | |
210 | has proved to be problematic if the controller encounters | |
211 | certain errors, and thus should be treated with care. | |
212 | ||
213 | YMMV. | |
214 | ||
1c6a0718 PO |
215 | config MMC_OMAP |
216 | tristate "TI OMAP Multimedia Card Interface support" | |
790864dc | 217 | depends on ARCH_OMAP |
1c6a0718 PO |
218 | select TPS65010 if MACH_OMAP_H2 |
219 | help | |
220 | This selects the TI OMAP Multimedia card Interface. | |
221 | If you have an OMAP board with a Multimedia Card slot, | |
222 | say Y or M here. | |
223 | ||
224 | If unsure, say N. | |
225 | ||
a45c6cb8 MC |
226 | config MMC_OMAP_HS |
227 | tristate "TI OMAP High Speed Multimedia Card Interface support" | |
59b479e0 | 228 | depends on SOC_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4 |
a45c6cb8 MC |
229 | help |
230 | This selects the TI OMAP High Speed Multimedia card Interface. | |
82cf818d | 231 | If you have an OMAP2430 or OMAP3 board or OMAP4 board with a |
232 | Multimedia Card slot, say Y or M here. | |
a45c6cb8 MC |
233 | |
234 | If unsure, say N. | |
235 | ||
1c6a0718 PO |
236 | config MMC_WBSD |
237 | tristate "Winbond W83L51xD SD/MMC Card Interface support" | |
790864dc | 238 | depends on ISA_DMA_API |
1c6a0718 PO |
239 | help |
240 | This selects the Winbond(R) W83L51xD Secure digital and | |
241 | Multimedia card Interface. | |
242 | If you have a machine with a integrated W83L518D or W83L519D | |
243 | SD/MMC card reader, say Y or M here. | |
244 | ||
245 | If unsure, say N. | |
246 | ||
247 | config MMC_AU1X | |
248 | tristate "Alchemy AU1XX0 MMC Card Interface support" | |
790864dc | 249 | depends on SOC_AU1200 |
1c6a0718 PO |
250 | help |
251 | This selects the AMD Alchemy(R) Multimedia card interface. | |
252 | If you have a Alchemy platform with a MMC slot, say Y or M here. | |
253 | ||
254 | If unsure, say N. | |
255 | ||
04d699c3 RE |
256 | choice |
257 | prompt "Atmel SD/MMC Driver" | |
09591dd3 | 258 | depends on AVR32 || ARCH_AT91 |
04d699c3 RE |
259 | default MMC_ATMELMCI if AVR32 |
260 | help | |
261 | Choose which driver to use for the Atmel MCI Silicon | |
262 | ||
1c6a0718 PO |
263 | config MMC_AT91 |
264 | tristate "AT91 SD/MMC Card Interface support" | |
790864dc | 265 | depends on ARCH_AT91 |
1c6a0718 PO |
266 | help |
267 | This selects the AT91 MCI controller. | |
268 | ||
269 | If unsure, say N. | |
270 | ||
7d2be074 HS |
271 | config MMC_ATMELMCI |
272 | tristate "Atmel Multimedia Card Interface support" | |
04d699c3 | 273 | depends on AVR32 || ARCH_AT91 |
7d2be074 HS |
274 | help |
275 | This selects the Atmel Multimedia Card Interface driver. If | |
04d699c3 RE |
276 | you have an AT32 (AVR32) or AT91 platform with a Multimedia |
277 | Card slot, say Y or M here. | |
7d2be074 HS |
278 | |
279 | If unsure, say N. | |
280 | ||
04d699c3 RE |
281 | endchoice |
282 | ||
65e8b083 HS |
283 | config MMC_ATMELMCI_DMA |
284 | bool "Atmel MCI DMA support (EXPERIMENTAL)" | |
75305d76 | 285 | depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE && EXPERIMENTAL |
65e8b083 HS |
286 | help |
287 | Say Y here to have the Atmel MCI driver use a DMA engine to | |
288 | do data transfers and thus increase the throughput and | |
289 | reduce the CPU utilization. Note that this is highly | |
290 | experimental and may cause the driver to lock up. | |
291 | ||
292 | If unsure, say N. | |
293 | ||
1c6a0718 PO |
294 | config MMC_IMX |
295 | tristate "Motorola i.MX Multimedia Card Interface support" | |
8c8fdbc9 | 296 | depends on ARCH_MX1 |
1c6a0718 PO |
297 | help |
298 | This selects the Motorola i.MX Multimedia card Interface. | |
299 | If you have a i.MX platform with a Multimedia Card slot, | |
d96be879 SH |
300 | say Y or M here. |
301 | ||
302 | If unsure, say N. | |
303 | ||
eba3f137 ST |
304 | config MMC_MSM |
305 | tristate "Qualcomm SDCC Controller Support" | |
edd4dd0e | 306 | depends on MMC && ARCH_MSM |
9d2bd738 SM |
307 | help |
308 | This provides support for the SD/MMC cell found in the | |
eba3f137 ST |
309 | MSM and QSD SOCs from Qualcomm. The controller also has |
310 | support for SDIO devices. | |
9d2bd738 | 311 | |
d96be879 SH |
312 | config MMC_MXC |
313 | tristate "Freescale i.MX2/3 Multimedia Card Interface support" | |
170cba8c | 314 | depends on MACH_MX21 || MACH_MX27 || ARCH_MX31 |
d96be879 SH |
315 | help |
316 | This selects the Freescale i.MX2/3 Multimedia card Interface. | |
317 | If you have a i.MX platform with a Multimedia Card slot, | |
1c6a0718 PO |
318 | say Y or M here. |
319 | ||
320 | If unsure, say N. | |
321 | ||
e4243f13 SG |
322 | config MMC_MXS |
323 | tristate "Freescale MXS Multimedia Card Interface support" | |
324 | depends on ARCH_MXS && MXS_DMA | |
325 | help | |
326 | This selects the Freescale SSP MMC controller found on MXS based | |
327 | platforms like mx23/28. | |
328 | ||
329 | If unsure, say N. | |
330 | ||
1c6a0718 PO |
331 | config MMC_TIFM_SD |
332 | tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)" | |
790864dc | 333 | depends on EXPERIMENTAL && PCI |
1c6a0718 PO |
334 | select TIFM_CORE |
335 | help | |
336 | Say Y here if you want to be able to access MMC/SD cards with | |
337 | the Texas Instruments(R) Flash Media card reader, found in many | |
338 | laptops. | |
339 | This option 'selects' (turns on, enables) 'TIFM_CORE', but you | |
340 | probably also need appropriate card reader host adapter, such as | |
341 | 'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support | |
342 | (TIFM_7XX1)'. | |
343 | ||
344 | To compile this driver as a module, choose M here: the | |
345 | module will be called tifm_sd. | |
346 | ||
236caa7c MS |
347 | config MMC_MVSDIO |
348 | tristate "Marvell MMC/SD/SDIO host driver" | |
349 | depends on PLAT_ORION | |
350 | ---help--- | |
351 | This selects the Marvell SDIO host driver. | |
352 | SDIO may currently be found on the Kirkwood 88F6281 and 88F6192 | |
353 | SoC controllers. | |
354 | ||
355 | To compile this driver as a module, choose M here: the | |
356 | module will be called mvsdio. | |
357 | ||
b4cff454 VB |
358 | config MMC_DAVINCI |
359 | tristate "TI DAVINCI Multimedia Card Interface support" | |
360 | depends on ARCH_DAVINCI | |
361 | help | |
362 | This selects the TI DAVINCI Multimedia card Interface. | |
363 | If you have an DAVINCI board with a Multimedia Card slot, | |
364 | say Y or M here. If unsure, say N. | |
365 | ||
15a0580c | 366 | config MMC_SPI |
57105737 | 367 | tristate "MMC/SD/SDIO over SPI" |
1ea4f444 | 368 | depends on SPI_MASTER && !HIGHMEM && HAS_DMA |
15a0580c DB |
369 | select CRC7 |
370 | select CRC_ITU_T | |
371 | help | |
692105b8 | 372 | Some systems access MMC/SD/SDIO cards using a SPI controller |
57105737 PO |
373 | instead of using a "native" MMC/SD/SDIO controller. This has a |
374 | disadvantage of being relatively high overhead, but a compensating | |
375 | advantage of working on many systems without dedicated MMC/SD/SDIO | |
376 | controllers. | |
15a0580c DB |
377 | |
378 | If unsure, or if your system has no SPI master driver, say N. | |
379 | ||
be518018 TK |
380 | config MMC_S3C |
381 | tristate "Samsung S3C SD/MMC Card Interface support" | |
1ea4f444 | 382 | depends on ARCH_S3C2410 |
be518018 TK |
383 | help |
384 | This selects a driver for the MCI interface found in | |
385 | Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. | |
386 | If you have a board based on one of those and a MMC/SD | |
387 | slot, say Y or M here. | |
388 | ||
389 | If unsure, say N. | |
390 | ||
5a2c4fe0 BD |
391 | config MMC_S3C_HW_SDIO_IRQ |
392 | bool "Hardware support for SDIO IRQ" | |
393 | depends on MMC_S3C | |
394 | help | |
395 | Enable the hardware support for SDIO interrupts instead of using | |
396 | the generic polling code. | |
397 | ||
26f14947 BD |
398 | choice |
399 | prompt "Samsung S3C SD/MMC transfer code" | |
400 | depends on MMC_S3C | |
401 | ||
402 | config MMC_S3C_PIO | |
403 | bool "Use PIO transfers only" | |
404 | help | |
405 | Use PIO to transfer data between memory and the hardware. | |
406 | ||
407 | PIO is slower than DMA as it requires CPU instructions to | |
408 | move the data. This has been the traditional default for | |
409 | the S3C MCI driver. | |
410 | ||
411 | config MMC_S3C_DMA | |
412 | bool "Use DMA transfers only (EXPERIMENTAL)" | |
413 | depends on EXPERIMENTAL | |
414 | help | |
415 | Use DMA to transfer data between memory and the hardare. | |
416 | ||
417 | Currently, the DMA support in this driver seems to not be | |
418 | working properly and needs to be debugged before this | |
419 | option is useful. | |
420 | ||
421 | config MMC_S3C_PIODMA | |
422 | bool "Support for both PIO and DMA (EXPERIMENTAL)" | |
423 | help | |
424 | Compile both the PIO and DMA transfer routines into the | |
425 | driver and let the platform select at run-time which one | |
426 | is best. | |
427 | ||
428 | See notes for the DMA option. | |
429 | ||
430 | endchoice | |
431 | ||
6a36913a SS |
432 | config MMC_SDRICOH_CS |
433 | tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)" | |
1ea4f444 | 434 | depends on EXPERIMENTAL && PCI && PCMCIA |
6a36913a SS |
435 | help |
436 | Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA | |
437 | card whenever you insert a MMC or SD card into the card slot. | |
438 | ||
439 | To compile this driver as a module, choose M here: the | |
440 | module will be called sdricoh_cs. | |
441 | ||
b6147490 GL |
442 | config MMC_TMIO_CORE |
443 | tristate | |
444 | ||
4a48998f IM |
445 | config MMC_TMIO |
446 | tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support" | |
42051e8a | 447 | depends on MFD_TMIO || MFD_ASIC3 |
b6147490 | 448 | select MMC_TMIO_CORE |
4a48998f IM |
449 | help |
450 | This provides support for the SD/MMC cell found in TC6393XB, | |
e6f2c7ad | 451 | T7L66XB and also HTC ASIC3 |
5f5bac82 | 452 | |
42051e8a GL |
453 | config MMC_SDHI |
454 | tristate "SH-Mobile SDHI SD/SDIO controller support" | |
022b4835 | 455 | depends on SUPERH || ARCH_SHMOBILE |
42051e8a GL |
456 | select MMC_TMIO_CORE |
457 | help | |
458 | This provides support for the SDHI SD/SDIO controller found in | |
459 | SuperH and ARM SH-Mobile SoCs | |
460 | ||
5f5bac82 MM |
461 | config MMC_CB710 |
462 | tristate "ENE CB710 MMC/SD Interface support" | |
463 | depends on PCI | |
9ffca830 | 464 | select MISC_DEVICES |
5f5bac82 MM |
465 | select CB710_CORE |
466 | help | |
467 | This option enables support for MMC/SD part of ENE CB710/720 Flash | |
468 | memory card reader found in some laptops (ie. some versions of | |
469 | HP Compaq nx9500). | |
470 | ||
471 | This driver can also be built as a module. If so, the module | |
472 | will be called cb710-mmc. | |
473 | ||
f0bf7f61 HW |
474 | config MMC_VIA_SDMMC |
475 | tristate "VIA SD/MMC Card Reader Driver" | |
476 | depends on PCI | |
477 | help | |
478 | This selects the VIA SD/MMC Card Reader driver, say Y or M here. | |
479 | VIA provides one multi-functional card reader which integrated into | |
480 | some motherboards manufactured by VIA. This card reader supports | |
481 | SD/MMC/SDHC. | |
482 | If you have a controller with this interface, say Y or M here. | |
483 | ||
484 | If unsure, say N. | |
eb962d5b CC |
485 | |
486 | config SDH_BFIN | |
487 | tristate "Blackfin Secure Digital Host support" | |
05dabcc4 | 488 | depends on (BF54x && !BF544) || (BF51x && !BF512) |
eb962d5b CC |
489 | help |
490 | If you say yes here you will get support for the Blackfin on-chip | |
491 | Secure Digital Host interface. This includes support for MMC and | |
492 | SD cards. | |
493 | ||
494 | To compile this driver as a module, choose M here: the | |
495 | module will be called bfin_sdh. | |
496 | ||
497 | If unsure, say N. | |
498 | ||
499 | config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND | |
500 | bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround" | |
501 | depends on SDH_BFIN | |
502 | help | |
503 | If you say yes here SD-Cards may work on the EZkit. | |
fdc50a94 | 504 | |
f95f3850 WN |
505 | config MMC_DW |
506 | tristate "Synopsys DesignWare Memory Card Interface" | |
507 | depends on ARM | |
508 | help | |
509 | This selects support for the Synopsys DesignWare Mobile Storage IP | |
510 | block, this provides host support for SD and MMC interfaces, in both | |
511 | PIO and external DMA modes. | |
512 | ||
513 | config MMC_DW_IDMAC | |
514 | bool "Internal DMAC interface" | |
515 | depends on MMC_DW | |
516 | help | |
517 | This selects support for the internal DMAC block within the Synopsys | |
518 | Designware Mobile Storage IP block. This disables the external DMA | |
519 | interface. | |
520 | ||
fdc50a94 YG |
521 | config MMC_SH_MMCIF |
522 | tristate "SuperH Internal MMCIF support" | |
523 | depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE) | |
524 | help | |
b595076a | 525 | This selects the MMC Host Interface controller (MMCIF). |
fdc50a94 YG |
526 | |
527 | This driver supports MMCIF in sh7724/sh7757/sh7372. | |
61bfbdb8 LPC |
528 | |
529 | config MMC_JZ4740 | |
530 | tristate "JZ4740 SD/Multimedia Card Interface support" | |
531 | depends on MACH_JZ4740 | |
532 | help | |
533 | This selects support for the SD/MMC controller on Ingenic JZ4740 | |
534 | SoCs. | |
535 | If you have a board based on such a SoC and with a SD/MMC slot, | |
536 | say Y or M here. | |
53f3a9e2 DV |
537 | |
538 | config MMC_USHC | |
539 | tristate "USB SD Host Controller (USHC) support" | |
540 | depends on USB | |
541 | help | |
542 | This selects support for USB SD Host Controllers based on | |
543 | the Cypress Astoria chip with firmware compliant with CSR's | |
544 | USB SD Host Controller specification (CS-118793-SP). | |
545 | ||
546 | CSR boards with this device include: USB<>SDIO (M1985v2), | |
547 | and Ultrasira. | |
548 | ||
549 | Note: These controllers only support SDIO cards and do not | |
550 | support MMC or SD memory cards. |