]>
Commit | Line | Data |
---|---|---|
a45c6cb8 MC |
1 | /* |
2 | * drivers/mmc/host/omap_hsmmc.c | |
3 | * | |
4 | * Driver for OMAP2430/3430 MMC controller. | |
5 | * | |
6 | * Copyright (C) 2007 Texas Instruments. | |
7 | * | |
8 | * Authors: | |
9 | * Syed Mohammed Khasim <x0khasim@ti.com> | |
10 | * Madhusudhan <madhu.cr@ti.com> | |
11 | * Mohit Jalori <mjalori@ti.com> | |
12 | * | |
13 | * This file is licensed under the terms of the GNU General Public License | |
14 | * version 2. This program is licensed "as is" without any warranty of any | |
15 | * kind, whether express or implied. | |
16 | */ | |
17 | ||
18 | #include <linux/module.h> | |
19 | #include <linux/init.h> | |
20 | #include <linux/interrupt.h> | |
21 | #include <linux/delay.h> | |
22 | #include <linux/dma-mapping.h> | |
23 | #include <linux/platform_device.h> | |
24 | #include <linux/workqueue.h> | |
25 | #include <linux/timer.h> | |
26 | #include <linux/clk.h> | |
27 | #include <linux/mmc/host.h> | |
28 | #include <linux/io.h> | |
29 | #include <linux/semaphore.h> | |
30 | #include <mach/dma.h> | |
31 | #include <mach/hardware.h> | |
32 | #include <mach/board.h> | |
33 | #include <mach/mmc.h> | |
34 | #include <mach/cpu.h> | |
35 | ||
36 | /* OMAP HSMMC Host Controller Registers */ | |
37 | #define OMAP_HSMMC_SYSCONFIG 0x0010 | |
38 | #define OMAP_HSMMC_CON 0x002C | |
39 | #define OMAP_HSMMC_BLK 0x0104 | |
40 | #define OMAP_HSMMC_ARG 0x0108 | |
41 | #define OMAP_HSMMC_CMD 0x010C | |
42 | #define OMAP_HSMMC_RSP10 0x0110 | |
43 | #define OMAP_HSMMC_RSP32 0x0114 | |
44 | #define OMAP_HSMMC_RSP54 0x0118 | |
45 | #define OMAP_HSMMC_RSP76 0x011C | |
46 | #define OMAP_HSMMC_DATA 0x0120 | |
47 | #define OMAP_HSMMC_HCTL 0x0128 | |
48 | #define OMAP_HSMMC_SYSCTL 0x012C | |
49 | #define OMAP_HSMMC_STAT 0x0130 | |
50 | #define OMAP_HSMMC_IE 0x0134 | |
51 | #define OMAP_HSMMC_ISE 0x0138 | |
52 | #define OMAP_HSMMC_CAPA 0x0140 | |
53 | ||
54 | #define VS18 (1 << 26) | |
55 | #define VS30 (1 << 25) | |
56 | #define SDVS18 (0x5 << 9) | |
57 | #define SDVS30 (0x6 << 9) | |
eb250826 | 58 | #define SDVS33 (0x7 << 9) |
1b331e69 | 59 | #define SDVS_MASK 0x00000E00 |
a45c6cb8 MC |
60 | #define SDVSCLR 0xFFFFF1FF |
61 | #define SDVSDET 0x00000400 | |
62 | #define AUTOIDLE 0x1 | |
63 | #define SDBP (1 << 8) | |
64 | #define DTO 0xe | |
65 | #define ICE 0x1 | |
66 | #define ICS 0x2 | |
67 | #define CEN (1 << 2) | |
68 | #define CLKD_MASK 0x0000FFC0 | |
69 | #define CLKD_SHIFT 6 | |
70 | #define DTO_MASK 0x000F0000 | |
71 | #define DTO_SHIFT 16 | |
72 | #define INT_EN_MASK 0x307F0033 | |
73 | #define INIT_STREAM (1 << 1) | |
74 | #define DP_SELECT (1 << 21) | |
75 | #define DDIR (1 << 4) | |
76 | #define DMA_EN 0x1 | |
77 | #define MSBS (1 << 5) | |
78 | #define BCE (1 << 1) | |
79 | #define FOUR_BIT (1 << 1) | |
73153010 | 80 | #define DW8 (1 << 5) |
a45c6cb8 MC |
81 | #define CC 0x1 |
82 | #define TC 0x02 | |
83 | #define OD 0x1 | |
84 | #define ERR (1 << 15) | |
85 | #define CMD_TIMEOUT (1 << 16) | |
86 | #define DATA_TIMEOUT (1 << 20) | |
87 | #define CMD_CRC (1 << 17) | |
88 | #define DATA_CRC (1 << 21) | |
89 | #define CARD_ERR (1 << 28) | |
90 | #define STAT_CLEAR 0xFFFFFFFF | |
91 | #define INIT_STREAM_CMD 0x00000000 | |
92 | #define DUAL_VOLT_OCR_BIT 7 | |
93 | #define SRC (1 << 25) | |
94 | #define SRD (1 << 26) | |
95 | ||
96 | /* | |
97 | * FIXME: Most likely all the data using these _DEVID defines should come | |
98 | * from the platform_data, or implemented in controller and slot specific | |
99 | * functions. | |
100 | */ | |
101 | #define OMAP_MMC1_DEVID 0 | |
102 | #define OMAP_MMC2_DEVID 1 | |
f3e2f1dd | 103 | #define OMAP_MMC3_DEVID 2 |
a45c6cb8 | 104 | |
a45c6cb8 MC |
105 | #define MMC_TIMEOUT_MS 20 |
106 | #define OMAP_MMC_MASTER_CLOCK 96000000 | |
107 | #define DRIVER_NAME "mmci-omap-hs" | |
108 | ||
109 | /* | |
110 | * One controller can have multiple slots, like on some omap boards using | |
111 | * omap.c controller driver. Luckily this is not currently done on any known | |
112 | * omap_hsmmc.c device. | |
113 | */ | |
114 | #define mmc_slot(host) (host->pdata->slots[host->slot_id]) | |
115 | ||
116 | /* | |
117 | * MMC Host controller read/write API's | |
118 | */ | |
119 | #define OMAP_HSMMC_READ(base, reg) \ | |
120 | __raw_readl((base) + OMAP_HSMMC_##reg) | |
121 | ||
122 | #define OMAP_HSMMC_WRITE(base, reg, val) \ | |
123 | __raw_writel((val), (base) + OMAP_HSMMC_##reg) | |
124 | ||
125 | struct mmc_omap_host { | |
126 | struct device *dev; | |
127 | struct mmc_host *mmc; | |
128 | struct mmc_request *mrq; | |
129 | struct mmc_command *cmd; | |
130 | struct mmc_data *data; | |
131 | struct clk *fclk; | |
132 | struct clk *iclk; | |
133 | struct clk *dbclk; | |
134 | struct semaphore sem; | |
135 | struct work_struct mmc_carddetect_work; | |
136 | void __iomem *base; | |
137 | resource_size_t mapbase; | |
138 | unsigned int id; | |
139 | unsigned int dma_len; | |
0ccd76d4 | 140 | unsigned int dma_sg_idx; |
a45c6cb8 | 141 | unsigned char bus_mode; |
a45c6cb8 MC |
142 | u32 *buffer; |
143 | u32 bytesleft; | |
144 | int suspended; | |
145 | int irq; | |
146 | int carddetect; | |
147 | int use_dma, dma_ch; | |
f3e2f1dd | 148 | int dma_line_tx, dma_line_rx; |
a45c6cb8 MC |
149 | int slot_id; |
150 | int dbclk_enabled; | |
4a694dc9 | 151 | int response_busy; |
a45c6cb8 MC |
152 | struct omap_mmc_platform_data *pdata; |
153 | }; | |
154 | ||
155 | /* | |
156 | * Stop clock to the card | |
157 | */ | |
158 | static void omap_mmc_stop_clock(struct mmc_omap_host *host) | |
159 | { | |
160 | OMAP_HSMMC_WRITE(host->base, SYSCTL, | |
161 | OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); | |
162 | if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0) | |
163 | dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n"); | |
164 | } | |
165 | ||
166 | /* | |
167 | * Send init stream sequence to card | |
168 | * before sending IDLE command | |
169 | */ | |
170 | static void send_init_stream(struct mmc_omap_host *host) | |
171 | { | |
172 | int reg = 0; | |
173 | unsigned long timeout; | |
174 | ||
175 | disable_irq(host->irq); | |
176 | OMAP_HSMMC_WRITE(host->base, CON, | |
177 | OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM); | |
178 | OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD); | |
179 | ||
180 | timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); | |
181 | while ((reg != CC) && time_before(jiffies, timeout)) | |
182 | reg = OMAP_HSMMC_READ(host->base, STAT) & CC; | |
183 | ||
184 | OMAP_HSMMC_WRITE(host->base, CON, | |
185 | OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM); | |
186 | enable_irq(host->irq); | |
187 | } | |
188 | ||
189 | static inline | |
190 | int mmc_omap_cover_is_closed(struct mmc_omap_host *host) | |
191 | { | |
192 | int r = 1; | |
193 | ||
194 | if (host->pdata->slots[host->slot_id].get_cover_state) | |
195 | r = host->pdata->slots[host->slot_id].get_cover_state(host->dev, | |
196 | host->slot_id); | |
197 | return r; | |
198 | } | |
199 | ||
200 | static ssize_t | |
201 | mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr, | |
202 | char *buf) | |
203 | { | |
204 | struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); | |
205 | struct mmc_omap_host *host = mmc_priv(mmc); | |
206 | ||
207 | return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" : | |
208 | "open"); | |
209 | } | |
210 | ||
211 | static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL); | |
212 | ||
213 | static ssize_t | |
214 | mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr, | |
215 | char *buf) | |
216 | { | |
217 | struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); | |
218 | struct mmc_omap_host *host = mmc_priv(mmc); | |
219 | struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id]; | |
220 | ||
e68fdabc | 221 | return sprintf(buf, "%s\n", slot.name); |
a45c6cb8 MC |
222 | } |
223 | ||
224 | static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL); | |
225 | ||
226 | /* | |
227 | * Configure the response type and send the cmd. | |
228 | */ | |
229 | static void | |
230 | mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd, | |
231 | struct mmc_data *data) | |
232 | { | |
233 | int cmdreg = 0, resptype = 0, cmdtype = 0; | |
234 | ||
235 | dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n", | |
236 | mmc_hostname(host->mmc), cmd->opcode, cmd->arg); | |
237 | host->cmd = cmd; | |
238 | ||
239 | /* | |
240 | * Clear status bits and enable interrupts | |
241 | */ | |
242 | OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); | |
243 | OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK); | |
244 | OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); | |
245 | ||
4a694dc9 | 246 | host->response_busy = 0; |
a45c6cb8 MC |
247 | if (cmd->flags & MMC_RSP_PRESENT) { |
248 | if (cmd->flags & MMC_RSP_136) | |
249 | resptype = 1; | |
4a694dc9 AH |
250 | else if (cmd->flags & MMC_RSP_BUSY) { |
251 | resptype = 3; | |
252 | host->response_busy = 1; | |
253 | } else | |
a45c6cb8 MC |
254 | resptype = 2; |
255 | } | |
256 | ||
257 | /* | |
258 | * Unlike OMAP1 controller, the cmdtype does not seem to be based on | |
259 | * ac, bc, adtc, bcr. Only commands ending an open ended transfer need | |
260 | * a val of 0x3, rest 0x0. | |
261 | */ | |
262 | if (cmd == host->mrq->stop) | |
263 | cmdtype = 0x3; | |
264 | ||
265 | cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22); | |
266 | ||
267 | if (data) { | |
268 | cmdreg |= DP_SELECT | MSBS | BCE; | |
269 | if (data->flags & MMC_DATA_READ) | |
270 | cmdreg |= DDIR; | |
271 | else | |
272 | cmdreg &= ~(DDIR); | |
273 | } | |
274 | ||
275 | if (host->use_dma) | |
276 | cmdreg |= DMA_EN; | |
277 | ||
278 | OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg); | |
279 | OMAP_HSMMC_WRITE(host->base, CMD, cmdreg); | |
280 | } | |
281 | ||
0ccd76d4 JY |
282 | static int |
283 | mmc_omap_get_dma_dir(struct mmc_omap_host *host, struct mmc_data *data) | |
284 | { | |
285 | if (data->flags & MMC_DATA_WRITE) | |
286 | return DMA_TO_DEVICE; | |
287 | else | |
288 | return DMA_FROM_DEVICE; | |
289 | } | |
290 | ||
a45c6cb8 MC |
291 | /* |
292 | * Notify the transfer complete to MMC core | |
293 | */ | |
294 | static void | |
295 | mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data) | |
296 | { | |
4a694dc9 AH |
297 | if (!data) { |
298 | struct mmc_request *mrq = host->mrq; | |
299 | ||
300 | host->mrq = NULL; | |
301 | mmc_omap_fclk_lazy_disable(host); | |
302 | mmc_request_done(host->mmc, mrq); | |
303 | return; | |
304 | } | |
305 | ||
a45c6cb8 MC |
306 | host->data = NULL; |
307 | ||
308 | if (host->use_dma && host->dma_ch != -1) | |
309 | dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, | |
0ccd76d4 | 310 | mmc_omap_get_dma_dir(host, data)); |
a45c6cb8 MC |
311 | |
312 | if (!data->error) | |
313 | data->bytes_xfered += data->blocks * (data->blksz); | |
314 | else | |
315 | data->bytes_xfered = 0; | |
316 | ||
317 | if (!data->stop) { | |
318 | host->mrq = NULL; | |
319 | mmc_request_done(host->mmc, data->mrq); | |
320 | return; | |
321 | } | |
322 | mmc_omap_start_command(host, data->stop, NULL); | |
323 | } | |
324 | ||
325 | /* | |
326 | * Notify the core about command completion | |
327 | */ | |
328 | static void | |
329 | mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd) | |
330 | { | |
331 | host->cmd = NULL; | |
332 | ||
333 | if (cmd->flags & MMC_RSP_PRESENT) { | |
334 | if (cmd->flags & MMC_RSP_136) { | |
335 | /* response type 2 */ | |
336 | cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10); | |
337 | cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32); | |
338 | cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54); | |
339 | cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76); | |
340 | } else { | |
341 | /* response types 1, 1b, 3, 4, 5, 6 */ | |
342 | cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10); | |
343 | } | |
344 | } | |
4a694dc9 | 345 | if ((host->data == NULL && !host->response_busy) || cmd->error) { |
a45c6cb8 MC |
346 | host->mrq = NULL; |
347 | mmc_request_done(host->mmc, cmd->mrq); | |
348 | } | |
349 | } | |
350 | ||
351 | /* | |
352 | * DMA clean up for command errors | |
353 | */ | |
82788ff5 | 354 | static void mmc_dma_cleanup(struct mmc_omap_host *host, int errno) |
a45c6cb8 | 355 | { |
82788ff5 | 356 | host->data->error = errno; |
a45c6cb8 MC |
357 | |
358 | if (host->use_dma && host->dma_ch != -1) { | |
359 | dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len, | |
0ccd76d4 | 360 | mmc_omap_get_dma_dir(host, host->data)); |
a45c6cb8 MC |
361 | omap_free_dma(host->dma_ch); |
362 | host->dma_ch = -1; | |
363 | up(&host->sem); | |
364 | } | |
365 | host->data = NULL; | |
a45c6cb8 MC |
366 | } |
367 | ||
368 | /* | |
369 | * Readable error output | |
370 | */ | |
371 | #ifdef CONFIG_MMC_DEBUG | |
372 | static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status) | |
373 | { | |
374 | /* --- means reserved bit without definition at documentation */ | |
375 | static const char *mmc_omap_status_bits[] = { | |
376 | "CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ", | |
377 | "OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC", | |
378 | "CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---", | |
379 | "---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---" | |
380 | }; | |
381 | char res[256]; | |
382 | char *buf = res; | |
383 | int len, i; | |
384 | ||
385 | len = sprintf(buf, "MMC IRQ 0x%x :", status); | |
386 | buf += len; | |
387 | ||
388 | for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++) | |
389 | if (status & (1 << i)) { | |
390 | len = sprintf(buf, " %s", mmc_omap_status_bits[i]); | |
391 | buf += len; | |
392 | } | |
393 | ||
394 | dev_dbg(mmc_dev(host->mmc), "%s\n", res); | |
395 | } | |
396 | #endif /* CONFIG_MMC_DEBUG */ | |
397 | ||
3ebf74b1 JP |
398 | /* |
399 | * MMC controller internal state machines reset | |
400 | * | |
401 | * Used to reset command or data internal state machines, using respectively | |
402 | * SRC or SRD bit of SYSCTL register | |
403 | * Can be called from interrupt context | |
404 | */ | |
405 | static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host, | |
406 | unsigned long bit) | |
407 | { | |
408 | unsigned long i = 0; | |
409 | unsigned long limit = (loops_per_jiffy * | |
410 | msecs_to_jiffies(MMC_TIMEOUT_MS)); | |
411 | ||
412 | OMAP_HSMMC_WRITE(host->base, SYSCTL, | |
413 | OMAP_HSMMC_READ(host->base, SYSCTL) | bit); | |
414 | ||
415 | while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) && | |
416 | (i++ < limit)) | |
417 | cpu_relax(); | |
418 | ||
419 | if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit) | |
420 | dev_err(mmc_dev(host->mmc), | |
421 | "Timeout waiting on controller reset in %s\n", | |
422 | __func__); | |
423 | } | |
a45c6cb8 MC |
424 | |
425 | /* | |
426 | * MMC controller IRQ handler | |
427 | */ | |
428 | static irqreturn_t mmc_omap_irq(int irq, void *dev_id) | |
429 | { | |
430 | struct mmc_omap_host *host = dev_id; | |
431 | struct mmc_data *data; | |
432 | int end_cmd = 0, end_trans = 0, status; | |
433 | ||
4a694dc9 | 434 | if (host->mrq == NULL) { |
a45c6cb8 MC |
435 | OMAP_HSMMC_WRITE(host->base, STAT, |
436 | OMAP_HSMMC_READ(host->base, STAT)); | |
437 | return IRQ_HANDLED; | |
438 | } | |
439 | ||
440 | data = host->data; | |
441 | status = OMAP_HSMMC_READ(host->base, STAT); | |
442 | dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); | |
443 | ||
444 | if (status & ERR) { | |
445 | #ifdef CONFIG_MMC_DEBUG | |
446 | mmc_omap_report_irq(host, status); | |
447 | #endif | |
448 | if ((status & CMD_TIMEOUT) || | |
449 | (status & CMD_CRC)) { | |
450 | if (host->cmd) { | |
451 | if (status & CMD_TIMEOUT) { | |
3ebf74b1 | 452 | mmc_omap_reset_controller_fsm(host, SRC); |
a45c6cb8 MC |
453 | host->cmd->error = -ETIMEDOUT; |
454 | } else { | |
455 | host->cmd->error = -EILSEQ; | |
456 | } | |
457 | end_cmd = 1; | |
458 | } | |
4a694dc9 AH |
459 | if (host->data || host->response_busy) { |
460 | if (host->data) | |
461 | mmc_dma_cleanup(host, -ETIMEDOUT); | |
462 | host->response_busy = 0; | |
3ebf74b1 | 463 | mmc_omap_reset_controller_fsm(host, SRD); |
c232f457 | 464 | } |
a45c6cb8 MC |
465 | } |
466 | if ((status & DATA_TIMEOUT) || | |
467 | (status & DATA_CRC)) { | |
4a694dc9 AH |
468 | if (host->data || host->response_busy) { |
469 | int err = (status & DATA_TIMEOUT) ? | |
470 | -ETIMEDOUT : -EILSEQ; | |
471 | ||
472 | if (host->data) | |
473 | mmc_dma_cleanup(host, err); | |
a45c6cb8 | 474 | else |
4a694dc9 AH |
475 | host->mrq->cmd->error = err; |
476 | host->response_busy = 0; | |
3ebf74b1 | 477 | mmc_omap_reset_controller_fsm(host, SRD); |
a45c6cb8 MC |
478 | end_trans = 1; |
479 | } | |
480 | } | |
481 | if (status & CARD_ERR) { | |
482 | dev_dbg(mmc_dev(host->mmc), | |
483 | "Ignoring card err CMD%d\n", host->cmd->opcode); | |
484 | if (host->cmd) | |
485 | end_cmd = 1; | |
486 | if (host->data) | |
487 | end_trans = 1; | |
488 | } | |
489 | } | |
490 | ||
491 | OMAP_HSMMC_WRITE(host->base, STAT, status); | |
492 | ||
493 | if (end_cmd || (status & CC)) | |
494 | mmc_omap_cmd_done(host, host->cmd); | |
495 | if (end_trans || (status & TC)) | |
496 | mmc_omap_xfer_done(host, data); | |
497 | ||
498 | return IRQ_HANDLED; | |
499 | } | |
500 | ||
501 | /* | |
eb250826 DB |
502 | * Switch MMC interface voltage ... only relevant for MMC1. |
503 | * | |
504 | * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver. | |
505 | * The MMC2 transceiver controls are used instead of DAT4..DAT7. | |
506 | * Some chips, like eMMC ones, use internal transceivers. | |
a45c6cb8 MC |
507 | */ |
508 | static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd) | |
509 | { | |
510 | u32 reg_val = 0; | |
511 | int ret; | |
512 | ||
513 | /* Disable the clocks */ | |
514 | clk_disable(host->fclk); | |
515 | clk_disable(host->iclk); | |
516 | clk_disable(host->dbclk); | |
517 | ||
518 | /* Turn the power off */ | |
519 | ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); | |
520 | if (ret != 0) | |
521 | goto err; | |
522 | ||
523 | /* Turn the power ON with given VDD 1.8 or 3.0v */ | |
524 | ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd); | |
525 | if (ret != 0) | |
526 | goto err; | |
527 | ||
528 | clk_enable(host->fclk); | |
529 | clk_enable(host->iclk); | |
530 | clk_enable(host->dbclk); | |
531 | ||
532 | OMAP_HSMMC_WRITE(host->base, HCTL, | |
533 | OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); | |
534 | reg_val = OMAP_HSMMC_READ(host->base, HCTL); | |
eb250826 | 535 | |
a45c6cb8 MC |
536 | /* |
537 | * If a MMC dual voltage card is detected, the set_ios fn calls | |
538 | * this fn with VDD bit set for 1.8V. Upon card removal from the | |
539 | * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF. | |
540 | * | |
eb250826 DB |
541 | * Cope with a bit of slop in the range ... per data sheets: |
542 | * - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max, | |
543 | * but recommended values are 1.71V to 1.89V | |
544 | * - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max, | |
545 | * but recommended values are 2.7V to 3.3V | |
546 | * | |
547 | * Board setup code shouldn't permit anything very out-of-range. | |
548 | * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the | |
549 | * middle range) but VSIM can't power DAT4..DAT7 at more than 3V. | |
a45c6cb8 | 550 | */ |
eb250826 | 551 | if ((1 << vdd) <= MMC_VDD_23_24) |
a45c6cb8 | 552 | reg_val |= SDVS18; |
eb250826 DB |
553 | else |
554 | reg_val |= SDVS30; | |
a45c6cb8 MC |
555 | |
556 | OMAP_HSMMC_WRITE(host->base, HCTL, reg_val); | |
557 | ||
558 | OMAP_HSMMC_WRITE(host->base, HCTL, | |
559 | OMAP_HSMMC_READ(host->base, HCTL) | SDBP); | |
560 | ||
561 | return 0; | |
562 | err: | |
563 | dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n"); | |
564 | return ret; | |
565 | } | |
566 | ||
567 | /* | |
568 | * Work Item to notify the core about card insertion/removal | |
569 | */ | |
570 | static void mmc_omap_detect(struct work_struct *work) | |
571 | { | |
572 | struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, | |
573 | mmc_carddetect_work); | |
249d0fa9 DB |
574 | struct omap_mmc_slot_data *slot = &mmc_slot(host); |
575 | ||
e1a55f5e AH |
576 | if (mmc_slot(host).card_detect) |
577 | host->carddetect = slot->card_detect(slot->card_detect_irq); | |
578 | else | |
579 | host->carddetect = -ENOSYS; | |
a45c6cb8 MC |
580 | |
581 | sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch"); | |
582 | if (host->carddetect) { | |
583 | mmc_detect_change(host->mmc, (HZ * 200) / 1000); | |
584 | } else { | |
3ebf74b1 | 585 | mmc_omap_reset_controller_fsm(host, SRD); |
a45c6cb8 MC |
586 | mmc_detect_change(host->mmc, (HZ * 50) / 1000); |
587 | } | |
588 | } | |
589 | ||
590 | /* | |
591 | * ISR for handling card insertion and removal | |
592 | */ | |
593 | static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id) | |
594 | { | |
595 | struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id; | |
596 | ||
a45c6cb8 MC |
597 | schedule_work(&host->mmc_carddetect_work); |
598 | ||
599 | return IRQ_HANDLED; | |
600 | } | |
601 | ||
0ccd76d4 JY |
602 | static int mmc_omap_get_dma_sync_dev(struct mmc_omap_host *host, |
603 | struct mmc_data *data) | |
604 | { | |
605 | int sync_dev; | |
606 | ||
f3e2f1dd GI |
607 | if (data->flags & MMC_DATA_WRITE) |
608 | sync_dev = host->dma_line_tx; | |
609 | else | |
610 | sync_dev = host->dma_line_rx; | |
0ccd76d4 JY |
611 | return sync_dev; |
612 | } | |
613 | ||
614 | static void mmc_omap_config_dma_params(struct mmc_omap_host *host, | |
615 | struct mmc_data *data, | |
616 | struct scatterlist *sgl) | |
617 | { | |
618 | int blksz, nblk, dma_ch; | |
619 | ||
620 | dma_ch = host->dma_ch; | |
621 | if (data->flags & MMC_DATA_WRITE) { | |
622 | omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, | |
623 | (host->mapbase + OMAP_HSMMC_DATA), 0, 0); | |
624 | omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC, | |
625 | sg_dma_address(sgl), 0, 0); | |
626 | } else { | |
627 | omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, | |
628 | (host->mapbase + OMAP_HSMMC_DATA), 0, 0); | |
629 | omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC, | |
630 | sg_dma_address(sgl), 0, 0); | |
631 | } | |
632 | ||
633 | blksz = host->data->blksz; | |
634 | nblk = sg_dma_len(sgl) / blksz; | |
635 | ||
636 | omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32, | |
637 | blksz / 4, nblk, OMAP_DMA_SYNC_FRAME, | |
638 | mmc_omap_get_dma_sync_dev(host, data), | |
639 | !(data->flags & MMC_DATA_WRITE)); | |
640 | ||
641 | omap_start_dma(dma_ch); | |
642 | } | |
643 | ||
a45c6cb8 MC |
644 | /* |
645 | * DMA call back function | |
646 | */ | |
647 | static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data) | |
648 | { | |
649 | struct mmc_omap_host *host = data; | |
650 | ||
651 | if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ) | |
652 | dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n"); | |
653 | ||
654 | if (host->dma_ch < 0) | |
655 | return; | |
656 | ||
0ccd76d4 JY |
657 | host->dma_sg_idx++; |
658 | if (host->dma_sg_idx < host->dma_len) { | |
659 | /* Fire up the next transfer. */ | |
660 | mmc_omap_config_dma_params(host, host->data, | |
661 | host->data->sg + host->dma_sg_idx); | |
662 | return; | |
663 | } | |
664 | ||
a45c6cb8 MC |
665 | omap_free_dma(host->dma_ch); |
666 | host->dma_ch = -1; | |
667 | /* | |
668 | * DMA Callback: run in interrupt context. | |
669 | * mutex_unlock will through a kernel warning if used. | |
670 | */ | |
671 | up(&host->sem); | |
672 | } | |
673 | ||
a45c6cb8 MC |
674 | /* |
675 | * Routine to configure and start DMA for the MMC card | |
676 | */ | |
677 | static int | |
678 | mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req) | |
679 | { | |
0ccd76d4 | 680 | int dma_ch = 0, ret = 0, err = 1, i; |
a45c6cb8 MC |
681 | struct mmc_data *data = req->data; |
682 | ||
0ccd76d4 JY |
683 | /* Sanity check: all the SG entries must be aligned by block size. */ |
684 | for (i = 0; i < host->dma_len; i++) { | |
685 | struct scatterlist *sgl; | |
686 | ||
687 | sgl = data->sg + i; | |
688 | if (sgl->length % data->blksz) | |
689 | return -EINVAL; | |
690 | } | |
691 | if ((data->blksz % 4) != 0) | |
692 | /* REVISIT: The MMC buffer increments only when MSB is written. | |
693 | * Return error for blksz which is non multiple of four. | |
694 | */ | |
695 | return -EINVAL; | |
696 | ||
a45c6cb8 MC |
697 | /* |
698 | * If for some reason the DMA transfer is still active, | |
699 | * we wait for timeout period and free the dma | |
700 | */ | |
701 | if (host->dma_ch != -1) { | |
702 | set_current_state(TASK_UNINTERRUPTIBLE); | |
703 | schedule_timeout(100); | |
704 | if (down_trylock(&host->sem)) { | |
705 | omap_free_dma(host->dma_ch); | |
706 | host->dma_ch = -1; | |
707 | up(&host->sem); | |
708 | return err; | |
709 | } | |
710 | } else { | |
711 | if (down_trylock(&host->sem)) | |
712 | return err; | |
713 | } | |
714 | ||
0ccd76d4 JY |
715 | ret = omap_request_dma(mmc_omap_get_dma_sync_dev(host, data), "MMC/SD", |
716 | mmc_omap_dma_cb,host, &dma_ch); | |
a45c6cb8 | 717 | if (ret != 0) { |
0ccd76d4 | 718 | dev_err(mmc_dev(host->mmc), |
a45c6cb8 MC |
719 | "%s: omap_request_dma() failed with %d\n", |
720 | mmc_hostname(host->mmc), ret); | |
721 | return ret; | |
722 | } | |
723 | ||
724 | host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, | |
0ccd76d4 | 725 | data->sg_len, mmc_omap_get_dma_dir(host, data)); |
a45c6cb8 | 726 | host->dma_ch = dma_ch; |
0ccd76d4 | 727 | host->dma_sg_idx = 0; |
a45c6cb8 | 728 | |
0ccd76d4 | 729 | mmc_omap_config_dma_params(host, data, data->sg); |
a45c6cb8 | 730 | |
a45c6cb8 MC |
731 | return 0; |
732 | } | |
733 | ||
734 | static void set_data_timeout(struct mmc_omap_host *host, | |
735 | struct mmc_request *req) | |
736 | { | |
737 | unsigned int timeout, cycle_ns; | |
738 | uint32_t reg, clkd, dto = 0; | |
739 | ||
740 | reg = OMAP_HSMMC_READ(host->base, SYSCTL); | |
741 | clkd = (reg & CLKD_MASK) >> CLKD_SHIFT; | |
742 | if (clkd == 0) | |
743 | clkd = 1; | |
744 | ||
745 | cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd); | |
746 | timeout = req->data->timeout_ns / cycle_ns; | |
747 | timeout += req->data->timeout_clks; | |
748 | if (timeout) { | |
749 | while ((timeout & 0x80000000) == 0) { | |
750 | dto += 1; | |
751 | timeout <<= 1; | |
752 | } | |
753 | dto = 31 - dto; | |
754 | timeout <<= 1; | |
755 | if (timeout && dto) | |
756 | dto += 1; | |
757 | if (dto >= 13) | |
758 | dto -= 13; | |
759 | else | |
760 | dto = 0; | |
761 | if (dto > 14) | |
762 | dto = 14; | |
763 | } | |
764 | ||
765 | reg &= ~DTO_MASK; | |
766 | reg |= dto << DTO_SHIFT; | |
767 | OMAP_HSMMC_WRITE(host->base, SYSCTL, reg); | |
768 | } | |
769 | ||
770 | /* | |
771 | * Configure block length for MMC/SD cards and initiate the transfer. | |
772 | */ | |
773 | static int | |
774 | mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) | |
775 | { | |
776 | int ret; | |
777 | host->data = req->data; | |
778 | ||
779 | if (req->data == NULL) { | |
a45c6cb8 MC |
780 | OMAP_HSMMC_WRITE(host->base, BLK, 0); |
781 | return 0; | |
782 | } | |
783 | ||
784 | OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz) | |
785 | | (req->data->blocks << 16)); | |
786 | set_data_timeout(host, req); | |
787 | ||
a45c6cb8 MC |
788 | if (host->use_dma) { |
789 | ret = mmc_omap_start_dma_transfer(host, req); | |
790 | if (ret != 0) { | |
791 | dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n"); | |
792 | return ret; | |
793 | } | |
794 | } | |
795 | return 0; | |
796 | } | |
797 | ||
798 | /* | |
799 | * Request function. for read/write operation | |
800 | */ | |
801 | static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req) | |
802 | { | |
803 | struct mmc_omap_host *host = mmc_priv(mmc); | |
804 | ||
805 | WARN_ON(host->mrq != NULL); | |
806 | host->mrq = req; | |
807 | mmc_omap_prepare_data(host, req); | |
808 | mmc_omap_start_command(host, req->cmd, req->data); | |
809 | } | |
810 | ||
811 | ||
812 | /* Routine to configure clock values. Exposed API to core */ | |
813 | static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | |
814 | { | |
815 | struct mmc_omap_host *host = mmc_priv(mmc); | |
816 | u16 dsor = 0; | |
817 | unsigned long regval; | |
818 | unsigned long timeout; | |
73153010 | 819 | u32 con; |
a45c6cb8 MC |
820 | |
821 | switch (ios->power_mode) { | |
822 | case MMC_POWER_OFF: | |
823 | mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); | |
a45c6cb8 MC |
824 | break; |
825 | case MMC_POWER_UP: | |
826 | mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd); | |
827 | break; | |
828 | } | |
829 | ||
73153010 | 830 | con = OMAP_HSMMC_READ(host->base, CON); |
a45c6cb8 | 831 | switch (mmc->ios.bus_width) { |
73153010 JL |
832 | case MMC_BUS_WIDTH_8: |
833 | OMAP_HSMMC_WRITE(host->base, CON, con | DW8); | |
834 | break; | |
a45c6cb8 | 835 | case MMC_BUS_WIDTH_4: |
73153010 | 836 | OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); |
a45c6cb8 MC |
837 | OMAP_HSMMC_WRITE(host->base, HCTL, |
838 | OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); | |
839 | break; | |
840 | case MMC_BUS_WIDTH_1: | |
73153010 | 841 | OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); |
a45c6cb8 MC |
842 | OMAP_HSMMC_WRITE(host->base, HCTL, |
843 | OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); | |
844 | break; | |
845 | } | |
846 | ||
847 | if (host->id == OMAP_MMC1_DEVID) { | |
eb250826 DB |
848 | /* Only MMC1 can interface at 3V without some flavor |
849 | * of external transceiver; but they all handle 1.8V. | |
850 | */ | |
a45c6cb8 MC |
851 | if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && |
852 | (ios->vdd == DUAL_VOLT_OCR_BIT)) { | |
853 | /* | |
854 | * The mmc_select_voltage fn of the core does | |
855 | * not seem to set the power_mode to | |
856 | * MMC_POWER_UP upon recalculating the voltage. | |
857 | * vdd 1.8v. | |
858 | */ | |
859 | if (omap_mmc_switch_opcond(host, ios->vdd) != 0) | |
860 | dev_dbg(mmc_dev(host->mmc), | |
861 | "Switch operation failed\n"); | |
862 | } | |
863 | } | |
864 | ||
865 | if (ios->clock) { | |
866 | dsor = OMAP_MMC_MASTER_CLOCK / ios->clock; | |
867 | if (dsor < 1) | |
868 | dsor = 1; | |
869 | ||
870 | if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock) | |
871 | dsor++; | |
872 | ||
873 | if (dsor > 250) | |
874 | dsor = 250; | |
875 | } | |
876 | omap_mmc_stop_clock(host); | |
877 | regval = OMAP_HSMMC_READ(host->base, SYSCTL); | |
878 | regval = regval & ~(CLKD_MASK); | |
879 | regval = regval | (dsor << 6) | (DTO << 16); | |
880 | OMAP_HSMMC_WRITE(host->base, SYSCTL, regval); | |
881 | OMAP_HSMMC_WRITE(host->base, SYSCTL, | |
882 | OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); | |
883 | ||
884 | /* Wait till the ICS bit is set */ | |
885 | timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); | |
886 | while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2 | |
887 | && time_before(jiffies, timeout)) | |
888 | msleep(1); | |
889 | ||
890 | OMAP_HSMMC_WRITE(host->base, SYSCTL, | |
891 | OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); | |
892 | ||
893 | if (ios->power_mode == MMC_POWER_ON) | |
894 | send_init_stream(host); | |
895 | ||
896 | if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) | |
897 | OMAP_HSMMC_WRITE(host->base, CON, | |
898 | OMAP_HSMMC_READ(host->base, CON) | OD); | |
899 | } | |
900 | ||
901 | static int omap_hsmmc_get_cd(struct mmc_host *mmc) | |
902 | { | |
903 | struct mmc_omap_host *host = mmc_priv(mmc); | |
904 | struct omap_mmc_platform_data *pdata = host->pdata; | |
905 | ||
906 | if (!pdata->slots[0].card_detect) | |
907 | return -ENOSYS; | |
908 | return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq); | |
909 | } | |
910 | ||
911 | static int omap_hsmmc_get_ro(struct mmc_host *mmc) | |
912 | { | |
913 | struct mmc_omap_host *host = mmc_priv(mmc); | |
914 | struct omap_mmc_platform_data *pdata = host->pdata; | |
915 | ||
916 | if (!pdata->slots[0].get_ro) | |
917 | return -ENOSYS; | |
918 | return pdata->slots[0].get_ro(host->dev, 0); | |
919 | } | |
920 | ||
1b331e69 KK |
921 | static void omap_hsmmc_init(struct mmc_omap_host *host) |
922 | { | |
923 | u32 hctl, capa, value; | |
924 | ||
925 | /* Only MMC1 supports 3.0V */ | |
926 | if (host->id == OMAP_MMC1_DEVID) { | |
927 | hctl = SDVS30; | |
928 | capa = VS30 | VS18; | |
929 | } else { | |
930 | hctl = SDVS18; | |
931 | capa = VS18; | |
932 | } | |
933 | ||
934 | value = OMAP_HSMMC_READ(host->base, HCTL) & ~SDVS_MASK; | |
935 | OMAP_HSMMC_WRITE(host->base, HCTL, value | hctl); | |
936 | ||
937 | value = OMAP_HSMMC_READ(host->base, CAPA); | |
938 | OMAP_HSMMC_WRITE(host->base, CAPA, value | capa); | |
939 | ||
940 | /* Set the controller to AUTO IDLE mode */ | |
941 | value = OMAP_HSMMC_READ(host->base, SYSCONFIG); | |
942 | OMAP_HSMMC_WRITE(host->base, SYSCONFIG, value | AUTOIDLE); | |
943 | ||
944 | /* Set SD bus power bit */ | |
945 | value = OMAP_HSMMC_READ(host->base, HCTL); | |
946 | OMAP_HSMMC_WRITE(host->base, HCTL, value | SDBP); | |
947 | } | |
948 | ||
a45c6cb8 MC |
949 | static struct mmc_host_ops mmc_omap_ops = { |
950 | .request = omap_mmc_request, | |
951 | .set_ios = omap_mmc_set_ios, | |
952 | .get_cd = omap_hsmmc_get_cd, | |
953 | .get_ro = omap_hsmmc_get_ro, | |
954 | /* NYET -- enable_sdio_irq */ | |
955 | }; | |
956 | ||
957 | static int __init omap_mmc_probe(struct platform_device *pdev) | |
958 | { | |
959 | struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; | |
960 | struct mmc_host *mmc; | |
961 | struct mmc_omap_host *host = NULL; | |
962 | struct resource *res; | |
963 | int ret = 0, irq; | |
a45c6cb8 MC |
964 | |
965 | if (pdata == NULL) { | |
966 | dev_err(&pdev->dev, "Platform Data is missing\n"); | |
967 | return -ENXIO; | |
968 | } | |
969 | ||
970 | if (pdata->nr_slots == 0) { | |
971 | dev_err(&pdev->dev, "No Slots\n"); | |
972 | return -ENXIO; | |
973 | } | |
974 | ||
975 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
976 | irq = platform_get_irq(pdev, 0); | |
977 | if (res == NULL || irq < 0) | |
978 | return -ENXIO; | |
979 | ||
980 | res = request_mem_region(res->start, res->end - res->start + 1, | |
981 | pdev->name); | |
982 | if (res == NULL) | |
983 | return -EBUSY; | |
984 | ||
985 | mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev); | |
986 | if (!mmc) { | |
987 | ret = -ENOMEM; | |
988 | goto err; | |
989 | } | |
990 | ||
991 | host = mmc_priv(mmc); | |
992 | host->mmc = mmc; | |
993 | host->pdata = pdata; | |
994 | host->dev = &pdev->dev; | |
995 | host->use_dma = 1; | |
996 | host->dev->dma_mask = &pdata->dma_mask; | |
997 | host->dma_ch = -1; | |
998 | host->irq = irq; | |
999 | host->id = pdev->id; | |
1000 | host->slot_id = 0; | |
1001 | host->mapbase = res->start; | |
1002 | host->base = ioremap(host->mapbase, SZ_4K); | |
1003 | ||
1004 | platform_set_drvdata(pdev, host); | |
1005 | INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect); | |
1006 | ||
1007 | mmc->ops = &mmc_omap_ops; | |
1008 | mmc->f_min = 400000; | |
1009 | mmc->f_max = 52000000; | |
1010 | ||
1011 | sema_init(&host->sem, 1); | |
1012 | ||
1013 | host->iclk = clk_get(&pdev->dev, "mmchs_ick"); | |
1014 | if (IS_ERR(host->iclk)) { | |
1015 | ret = PTR_ERR(host->iclk); | |
1016 | host->iclk = NULL; | |
1017 | goto err1; | |
1018 | } | |
1019 | host->fclk = clk_get(&pdev->dev, "mmchs_fck"); | |
1020 | if (IS_ERR(host->fclk)) { | |
1021 | ret = PTR_ERR(host->fclk); | |
1022 | host->fclk = NULL; | |
1023 | clk_put(host->iclk); | |
1024 | goto err1; | |
1025 | } | |
1026 | ||
1027 | if (clk_enable(host->fclk) != 0) { | |
1028 | clk_put(host->iclk); | |
1029 | clk_put(host->fclk); | |
1030 | goto err1; | |
1031 | } | |
1032 | ||
1033 | if (clk_enable(host->iclk) != 0) { | |
1034 | clk_disable(host->fclk); | |
1035 | clk_put(host->iclk); | |
1036 | clk_put(host->fclk); | |
1037 | goto err1; | |
1038 | } | |
1039 | ||
1040 | host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); | |
1041 | /* | |
1042 | * MMC can still work without debounce clock. | |
1043 | */ | |
1044 | if (IS_ERR(host->dbclk)) | |
1045 | dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n"); | |
1046 | else | |
1047 | if (clk_enable(host->dbclk) != 0) | |
1048 | dev_dbg(mmc_dev(host->mmc), "Enabling debounce" | |
1049 | " clk failed\n"); | |
1050 | else | |
1051 | host->dbclk_enabled = 1; | |
1052 | ||
0ccd76d4 JY |
1053 | /* Since we do only SG emulation, we can have as many segs |
1054 | * as we want. */ | |
1055 | mmc->max_phys_segs = 1024; | |
1056 | mmc->max_hw_segs = 1024; | |
1057 | ||
a45c6cb8 MC |
1058 | mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ |
1059 | mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ | |
1060 | mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; | |
1061 | mmc->max_seg_size = mmc->max_req_size; | |
1062 | ||
1063 | mmc->ocr_avail = mmc_slot(host).ocr_mask; | |
1064 | mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; | |
1065 | ||
73153010 JL |
1066 | if (pdata->slots[host->slot_id].wires >= 8) |
1067 | mmc->caps |= MMC_CAP_8_BIT_DATA; | |
1068 | else if (pdata->slots[host->slot_id].wires >= 4) | |
a45c6cb8 MC |
1069 | mmc->caps |= MMC_CAP_4_BIT_DATA; |
1070 | ||
1b331e69 | 1071 | omap_hsmmc_init(host); |
a45c6cb8 | 1072 | |
f3e2f1dd GI |
1073 | /* Select DMA lines */ |
1074 | switch (host->id) { | |
1075 | case OMAP_MMC1_DEVID: | |
1076 | host->dma_line_tx = OMAP24XX_DMA_MMC1_TX; | |
1077 | host->dma_line_rx = OMAP24XX_DMA_MMC1_RX; | |
1078 | break; | |
1079 | case OMAP_MMC2_DEVID: | |
1080 | host->dma_line_tx = OMAP24XX_DMA_MMC2_TX; | |
1081 | host->dma_line_rx = OMAP24XX_DMA_MMC2_RX; | |
1082 | break; | |
1083 | case OMAP_MMC3_DEVID: | |
1084 | host->dma_line_tx = OMAP34XX_DMA_MMC3_TX; | |
1085 | host->dma_line_rx = OMAP34XX_DMA_MMC3_RX; | |
1086 | break; | |
1087 | default: | |
1088 | dev_err(mmc_dev(host->mmc), "Invalid MMC id\n"); | |
1089 | goto err_irq; | |
1090 | } | |
1091 | ||
a45c6cb8 MC |
1092 | /* Request IRQ for MMC operations */ |
1093 | ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED, | |
1094 | mmc_hostname(mmc), host); | |
1095 | if (ret) { | |
1096 | dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n"); | |
1097 | goto err_irq; | |
1098 | } | |
1099 | ||
1100 | if (pdata->init != NULL) { | |
1101 | if (pdata->init(&pdev->dev) != 0) { | |
1102 | dev_dbg(mmc_dev(host->mmc), | |
1103 | "Unable to configure MMC IRQs\n"); | |
1104 | goto err_irq_cd_init; | |
1105 | } | |
1106 | } | |
1107 | ||
1108 | /* Request IRQ for card detect */ | |
e1a55f5e | 1109 | if ((mmc_slot(host).card_detect_irq)) { |
a45c6cb8 MC |
1110 | ret = request_irq(mmc_slot(host).card_detect_irq, |
1111 | omap_mmc_cd_handler, | |
1112 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | |
1113 | | IRQF_DISABLED, | |
1114 | mmc_hostname(mmc), host); | |
1115 | if (ret) { | |
1116 | dev_dbg(mmc_dev(host->mmc), | |
1117 | "Unable to grab MMC CD IRQ\n"); | |
1118 | goto err_irq_cd; | |
1119 | } | |
1120 | } | |
1121 | ||
1122 | OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK); | |
1123 | OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); | |
1124 | ||
1125 | mmc_add_host(mmc); | |
1126 | ||
1127 | if (host->pdata->slots[host->slot_id].name != NULL) { | |
1128 | ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name); | |
1129 | if (ret < 0) | |
1130 | goto err_slot_name; | |
1131 | } | |
e1a55f5e AH |
1132 | if (mmc_slot(host).card_detect_irq && |
1133 | host->pdata->slots[host->slot_id].get_cover_state) { | |
a45c6cb8 MC |
1134 | ret = device_create_file(&mmc->class_dev, |
1135 | &dev_attr_cover_switch); | |
1136 | if (ret < 0) | |
1137 | goto err_cover_switch; | |
1138 | } | |
1139 | ||
1140 | return 0; | |
1141 | ||
1142 | err_cover_switch: | |
1143 | device_remove_file(&mmc->class_dev, &dev_attr_cover_switch); | |
1144 | err_slot_name: | |
1145 | mmc_remove_host(mmc); | |
1146 | err_irq_cd: | |
1147 | free_irq(mmc_slot(host).card_detect_irq, host); | |
1148 | err_irq_cd_init: | |
1149 | free_irq(host->irq, host); | |
1150 | err_irq: | |
1151 | clk_disable(host->fclk); | |
1152 | clk_disable(host->iclk); | |
1153 | clk_put(host->fclk); | |
1154 | clk_put(host->iclk); | |
1155 | if (host->dbclk_enabled) { | |
1156 | clk_disable(host->dbclk); | |
1157 | clk_put(host->dbclk); | |
1158 | } | |
1159 | ||
1160 | err1: | |
1161 | iounmap(host->base); | |
1162 | err: | |
1163 | dev_dbg(mmc_dev(host->mmc), "Probe Failed\n"); | |
1164 | release_mem_region(res->start, res->end - res->start + 1); | |
1165 | if (host) | |
1166 | mmc_free_host(mmc); | |
1167 | return ret; | |
1168 | } | |
1169 | ||
1170 | static int omap_mmc_remove(struct platform_device *pdev) | |
1171 | { | |
1172 | struct mmc_omap_host *host = platform_get_drvdata(pdev); | |
1173 | struct resource *res; | |
1174 | ||
1175 | if (host) { | |
1176 | mmc_remove_host(host->mmc); | |
1177 | if (host->pdata->cleanup) | |
1178 | host->pdata->cleanup(&pdev->dev); | |
1179 | free_irq(host->irq, host); | |
1180 | if (mmc_slot(host).card_detect_irq) | |
1181 | free_irq(mmc_slot(host).card_detect_irq, host); | |
1182 | flush_scheduled_work(); | |
1183 | ||
1184 | clk_disable(host->fclk); | |
1185 | clk_disable(host->iclk); | |
1186 | clk_put(host->fclk); | |
1187 | clk_put(host->iclk); | |
1188 | if (host->dbclk_enabled) { | |
1189 | clk_disable(host->dbclk); | |
1190 | clk_put(host->dbclk); | |
1191 | } | |
1192 | ||
1193 | mmc_free_host(host->mmc); | |
1194 | iounmap(host->base); | |
1195 | } | |
1196 | ||
1197 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
1198 | if (res) | |
1199 | release_mem_region(res->start, res->end - res->start + 1); | |
1200 | platform_set_drvdata(pdev, NULL); | |
1201 | ||
1202 | return 0; | |
1203 | } | |
1204 | ||
1205 | #ifdef CONFIG_PM | |
1206 | static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state) | |
1207 | { | |
1208 | int ret = 0; | |
1209 | struct mmc_omap_host *host = platform_get_drvdata(pdev); | |
1210 | ||
1211 | if (host && host->suspended) | |
1212 | return 0; | |
1213 | ||
1214 | if (host) { | |
1215 | ret = mmc_suspend_host(host->mmc, state); | |
1216 | if (ret == 0) { | |
1217 | host->suspended = 1; | |
1218 | ||
1219 | OMAP_HSMMC_WRITE(host->base, ISE, 0); | |
1220 | OMAP_HSMMC_WRITE(host->base, IE, 0); | |
1221 | ||
1222 | if (host->pdata->suspend) { | |
1223 | ret = host->pdata->suspend(&pdev->dev, | |
1224 | host->slot_id); | |
1225 | if (ret) | |
1226 | dev_dbg(mmc_dev(host->mmc), | |
1227 | "Unable to handle MMC board" | |
1228 | " level suspend\n"); | |
1229 | } | |
1230 | ||
0683af48 JL |
1231 | OMAP_HSMMC_WRITE(host->base, HCTL, |
1232 | OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); | |
a45c6cb8 MC |
1233 | clk_disable(host->fclk); |
1234 | clk_disable(host->iclk); | |
1235 | clk_disable(host->dbclk); | |
1236 | } | |
1237 | ||
1238 | } | |
1239 | return ret; | |
1240 | } | |
1241 | ||
1242 | /* Routine to resume the MMC device */ | |
1243 | static int omap_mmc_resume(struct platform_device *pdev) | |
1244 | { | |
1245 | int ret = 0; | |
1246 | struct mmc_omap_host *host = platform_get_drvdata(pdev); | |
1247 | ||
1248 | if (host && !host->suspended) | |
1249 | return 0; | |
1250 | ||
1251 | if (host) { | |
1252 | ||
1253 | ret = clk_enable(host->fclk); | |
1254 | if (ret) | |
1255 | goto clk_en_err; | |
1256 | ||
1257 | ret = clk_enable(host->iclk); | |
1258 | if (ret) { | |
1259 | clk_disable(host->fclk); | |
1260 | clk_put(host->fclk); | |
1261 | goto clk_en_err; | |
1262 | } | |
1263 | ||
1264 | if (clk_enable(host->dbclk) != 0) | |
1265 | dev_dbg(mmc_dev(host->mmc), | |
1266 | "Enabling debounce clk failed\n"); | |
1267 | ||
1b331e69 KK |
1268 | omap_hsmmc_init(host); |
1269 | ||
a45c6cb8 MC |
1270 | if (host->pdata->resume) { |
1271 | ret = host->pdata->resume(&pdev->dev, host->slot_id); | |
1272 | if (ret) | |
1273 | dev_dbg(mmc_dev(host->mmc), | |
1274 | "Unmask interrupt failed\n"); | |
1275 | } | |
1276 | ||
1277 | /* Notify the core to resume the host */ | |
1278 | ret = mmc_resume_host(host->mmc); | |
1279 | if (ret == 0) | |
1280 | host->suspended = 0; | |
1281 | } | |
1282 | ||
1283 | return ret; | |
1284 | ||
1285 | clk_en_err: | |
1286 | dev_dbg(mmc_dev(host->mmc), | |
1287 | "Failed to enable MMC clocks during resume\n"); | |
1288 | return ret; | |
1289 | } | |
1290 | ||
1291 | #else | |
1292 | #define omap_mmc_suspend NULL | |
1293 | #define omap_mmc_resume NULL | |
1294 | #endif | |
1295 | ||
1296 | static struct platform_driver omap_mmc_driver = { | |
1297 | .probe = omap_mmc_probe, | |
1298 | .remove = omap_mmc_remove, | |
1299 | .suspend = omap_mmc_suspend, | |
1300 | .resume = omap_mmc_resume, | |
1301 | .driver = { | |
1302 | .name = DRIVER_NAME, | |
1303 | .owner = THIS_MODULE, | |
1304 | }, | |
1305 | }; | |
1306 | ||
1307 | static int __init omap_mmc_init(void) | |
1308 | { | |
1309 | /* Register the MMC driver */ | |
1310 | return platform_driver_register(&omap_mmc_driver); | |
1311 | } | |
1312 | ||
1313 | static void __exit omap_mmc_cleanup(void) | |
1314 | { | |
1315 | /* Unregister MMC driver */ | |
1316 | platform_driver_unregister(&omap_mmc_driver); | |
1317 | } | |
1318 | ||
1319 | module_init(omap_mmc_init); | |
1320 | module_exit(omap_mmc_cleanup); | |
1321 | ||
1322 | MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver"); | |
1323 | MODULE_LICENSE("GPL"); | |
1324 | MODULE_ALIAS("platform:" DRIVER_NAME); | |
1325 | MODULE_AUTHOR("Texas Instruments Inc"); |