]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | |
2 | /* | |
3 | * Linux driver for Disk-On-Chip Millennium | |
4 | * (c) 1999 Machine Vision Holdings, Inc. | |
5 | * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> | |
6 | * | |
e5580fbe | 7 | * $Id: doc2001.c,v 1.49 2005/11/07 11:14:24 gleixner Exp $ |
1da177e4 LT |
8 | */ |
9 | ||
10 | #include <linux/kernel.h> | |
11 | #include <linux/module.h> | |
12 | #include <asm/errno.h> | |
13 | #include <asm/io.h> | |
14 | #include <asm/uaccess.h> | |
15 | #include <linux/miscdevice.h> | |
16 | #include <linux/pci.h> | |
17 | #include <linux/delay.h> | |
18 | #include <linux/slab.h> | |
19 | #include <linux/sched.h> | |
20 | #include <linux/init.h> | |
21 | #include <linux/types.h> | |
22 | #include <linux/bitops.h> | |
23 | ||
24 | #include <linux/mtd/mtd.h> | |
25 | #include <linux/mtd/nand.h> | |
26 | #include <linux/mtd/doc2000.h> | |
27 | ||
28 | /* #define ECC_DEBUG */ | |
29 | ||
30 | /* I have no idea why some DoC chips can not use memcop_form|to_io(). | |
31 | * This may be due to the different revisions of the ASIC controller built-in or | |
32 | * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment | |
33 | * this:*/ | |
34 | #undef USE_MEMCPY | |
35 | ||
36 | static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, | |
37 | size_t *retlen, u_char *buf); | |
38 | static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, | |
39 | size_t *retlen, const u_char *buf); | |
40 | static int doc_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, | |
41 | size_t *retlen, u_char *buf, u_char *eccbuf, | |
42 | struct nand_oobinfo *oobsel); | |
43 | static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, | |
44 | size_t *retlen, const u_char *buf, u_char *eccbuf, | |
45 | struct nand_oobinfo *oobsel); | |
46 | static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len, | |
47 | size_t *retlen, u_char *buf); | |
48 | static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len, | |
49 | size_t *retlen, const u_char *buf); | |
50 | static int doc_erase (struct mtd_info *mtd, struct erase_info *instr); | |
51 | ||
52 | static struct mtd_info *docmillist = NULL; | |
53 | ||
54 | /* Perform the required delay cycles by reading from the NOP register */ | |
55 | static void DoC_Delay(void __iomem * docptr, unsigned short cycles) | |
56 | { | |
57 | volatile char dummy; | |
58 | int i; | |
59 | ||
60 | for (i = 0; i < cycles; i++) | |
61 | dummy = ReadDOC(docptr, NOP); | |
62 | } | |
63 | ||
64 | /* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */ | |
65 | static int _DoC_WaitReady(void __iomem * docptr) | |
66 | { | |
67 | unsigned short c = 0xffff; | |
68 | ||
69 | DEBUG(MTD_DEBUG_LEVEL3, | |
70 | "_DoC_WaitReady called for out-of-line wait\n"); | |
71 | ||
72 | /* Out-of-line routine to wait for chip response */ | |
73 | while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c) | |
74 | ; | |
75 | ||
76 | if (c == 0) | |
77 | DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n"); | |
78 | ||
79 | return (c == 0); | |
80 | } | |
81 | ||
82 | static inline int DoC_WaitReady(void __iomem * docptr) | |
83 | { | |
84 | /* This is inline, to optimise the common case, where it's ready instantly */ | |
85 | int ret = 0; | |
86 | ||
87 | /* 4 read form NOP register should be issued in prior to the read from CDSNControl | |
88 | see Software Requirement 11.4 item 2. */ | |
89 | DoC_Delay(docptr, 4); | |
90 | ||
91 | if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) | |
92 | /* Call the out-of-line routine to wait */ | |
93 | ret = _DoC_WaitReady(docptr); | |
94 | ||
95 | /* issue 2 read from NOP register after reading from CDSNControl register | |
96 | see Software Requirement 11.4 item 2. */ | |
97 | DoC_Delay(docptr, 2); | |
98 | ||
99 | return ret; | |
100 | } | |
101 | ||
102 | /* DoC_Command: Send a flash command to the flash chip through the CDSN IO register | |
103 | with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is | |
104 | required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ | |
105 | ||
858119e1 | 106 | static void DoC_Command(void __iomem * docptr, unsigned char command, |
1da177e4 LT |
107 | unsigned char xtraflags) |
108 | { | |
109 | /* Assert the CLE (Command Latch Enable) line to the flash chip */ | |
110 | WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl); | |
111 | DoC_Delay(docptr, 4); | |
112 | ||
113 | /* Send the command */ | |
114 | WriteDOC(command, docptr, Mil_CDSN_IO); | |
115 | WriteDOC(0x00, docptr, WritePipeTerm); | |
116 | ||
117 | /* Lower the CLE line */ | |
118 | WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl); | |
119 | DoC_Delay(docptr, 4); | |
120 | } | |
121 | ||
122 | /* DoC_Address: Set the current address for the flash chip through the CDSN IO register | |
123 | with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is | |
124 | required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ | |
125 | ||
126 | static inline void DoC_Address(void __iomem * docptr, int numbytes, unsigned long ofs, | |
127 | unsigned char xtraflags1, unsigned char xtraflags2) | |
128 | { | |
129 | /* Assert the ALE (Address Latch Enable) line to the flash chip */ | |
130 | WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl); | |
131 | DoC_Delay(docptr, 4); | |
132 | ||
133 | /* Send the address */ | |
134 | switch (numbytes) | |
135 | { | |
136 | case 1: | |
137 | /* Send single byte, bits 0-7. */ | |
138 | WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO); | |
139 | WriteDOC(0x00, docptr, WritePipeTerm); | |
140 | break; | |
141 | case 2: | |
142 | /* Send bits 9-16 followed by 17-23 */ | |
143 | WriteDOC((ofs >> 9) & 0xff, docptr, Mil_CDSN_IO); | |
144 | WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO); | |
145 | WriteDOC(0x00, docptr, WritePipeTerm); | |
146 | break; | |
147 | case 3: | |
148 | /* Send 0-7, 9-16, then 17-23 */ | |
149 | WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO); | |
150 | WriteDOC((ofs >> 9) & 0xff, docptr, Mil_CDSN_IO); | |
151 | WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO); | |
152 | WriteDOC(0x00, docptr, WritePipeTerm); | |
153 | break; | |
154 | default: | |
155 | return; | |
156 | } | |
157 | ||
158 | /* Lower the ALE line */ | |
159 | WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr, CDSNControl); | |
160 | DoC_Delay(docptr, 4); | |
161 | } | |
162 | ||
163 | /* DoC_SelectChip: Select a given flash chip within the current floor */ | |
164 | static int DoC_SelectChip(void __iomem * docptr, int chip) | |
165 | { | |
166 | /* Select the individual flash chip requested */ | |
167 | WriteDOC(chip, docptr, CDSNDeviceSelect); | |
168 | DoC_Delay(docptr, 4); | |
169 | ||
170 | /* Wait for it to be ready */ | |
171 | return DoC_WaitReady(docptr); | |
172 | } | |
173 | ||
174 | /* DoC_SelectFloor: Select a given floor (bank of flash chips) */ | |
175 | static int DoC_SelectFloor(void __iomem * docptr, int floor) | |
176 | { | |
177 | /* Select the floor (bank) of chips required */ | |
178 | WriteDOC(floor, docptr, FloorSelect); | |
179 | ||
180 | /* Wait for the chip to be ready */ | |
181 | return DoC_WaitReady(docptr); | |
182 | } | |
183 | ||
184 | /* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */ | |
185 | static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip) | |
186 | { | |
187 | int mfr, id, i, j; | |
188 | volatile char dummy; | |
189 | ||
190 | /* Page in the required floor/chip | |
191 | FIXME: is this supported by Millennium ?? */ | |
192 | DoC_SelectFloor(doc->virtadr, floor); | |
193 | DoC_SelectChip(doc->virtadr, chip); | |
194 | ||
195 | /* Reset the chip, see Software Requirement 11.4 item 1. */ | |
196 | DoC_Command(doc->virtadr, NAND_CMD_RESET, CDSN_CTRL_WP); | |
197 | DoC_WaitReady(doc->virtadr); | |
198 | ||
e5580fbe | 199 | /* Read the NAND chip ID: 1. Send ReadID command */ |
1da177e4 LT |
200 | DoC_Command(doc->virtadr, NAND_CMD_READID, CDSN_CTRL_WP); |
201 | ||
e5580fbe | 202 | /* Read the NAND chip ID: 2. Send address byte zero */ |
1da177e4 LT |
203 | DoC_Address(doc->virtadr, 1, 0x00, CDSN_CTRL_WP, 0x00); |
204 | ||
205 | /* Read the manufacturer and device id codes of the flash device through | |
206 | CDSN IO register see Software Requirement 11.4 item 5.*/ | |
207 | dummy = ReadDOC(doc->virtadr, ReadPipeInit); | |
208 | DoC_Delay(doc->virtadr, 2); | |
209 | mfr = ReadDOC(doc->virtadr, Mil_CDSN_IO); | |
210 | ||
211 | DoC_Delay(doc->virtadr, 2); | |
212 | id = ReadDOC(doc->virtadr, Mil_CDSN_IO); | |
213 | dummy = ReadDOC(doc->virtadr, LastDataRead); | |
214 | ||
215 | /* No response - return failure */ | |
216 | if (mfr == 0xff || mfr == 0) | |
217 | return 0; | |
218 | ||
219 | /* FIXME: to deal with multi-flash on multi-Millennium case more carefully */ | |
220 | for (i = 0; nand_flash_ids[i].name != NULL; i++) { | |
221 | if ( id == nand_flash_ids[i].id) { | |
222 | /* Try to identify manufacturer */ | |
223 | for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { | |
224 | if (nand_manuf_ids[j].id == mfr) | |
225 | break; | |
e5580fbe | 226 | } |
1da177e4 LT |
227 | printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, " |
228 | "Chip ID: %2.2X (%s:%s)\n", | |
229 | mfr, id, nand_manuf_ids[j].name, nand_flash_ids[i].name); | |
230 | doc->mfr = mfr; | |
231 | doc->id = id; | |
232 | doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1; | |
233 | break; | |
234 | } | |
235 | } | |
236 | ||
237 | if (nand_flash_ids[i].name == NULL) | |
238 | return 0; | |
239 | else | |
240 | return 1; | |
241 | } | |
242 | ||
243 | /* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */ | |
244 | static void DoC_ScanChips(struct DiskOnChip *this) | |
245 | { | |
246 | int floor, chip; | |
247 | int numchips[MAX_FLOORS_MIL]; | |
248 | int ret; | |
249 | ||
250 | this->numchips = 0; | |
251 | this->mfr = 0; | |
252 | this->id = 0; | |
253 | ||
254 | /* For each floor, find the number of valid chips it contains */ | |
255 | for (floor = 0,ret = 1; floor < MAX_FLOORS_MIL; floor++) { | |
256 | numchips[floor] = 0; | |
257 | for (chip = 0; chip < MAX_CHIPS_MIL && ret != 0; chip++) { | |
258 | ret = DoC_IdentChip(this, floor, chip); | |
259 | if (ret) { | |
260 | numchips[floor]++; | |
261 | this->numchips++; | |
262 | } | |
263 | } | |
264 | } | |
265 | /* If there are none at all that we recognise, bail */ | |
266 | if (!this->numchips) { | |
267 | printk("No flash chips recognised.\n"); | |
268 | return; | |
269 | } | |
270 | ||
271 | /* Allocate an array to hold the information for each chip */ | |
272 | this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL); | |
273 | if (!this->chips){ | |
274 | printk("No memory for allocating chip info structures\n"); | |
275 | return; | |
276 | } | |
277 | ||
e5580fbe | 278 | /* Fill out the chip array with {floor, chipno} for each |
1da177e4 LT |
279 | * detected chip in the device. */ |
280 | for (floor = 0, ret = 0; floor < MAX_FLOORS_MIL; floor++) { | |
281 | for (chip = 0 ; chip < numchips[floor] ; chip++) { | |
282 | this->chips[ret].floor = floor; | |
283 | this->chips[ret].chip = chip; | |
284 | this->chips[ret].curadr = 0; | |
285 | this->chips[ret].curmode = 0x50; | |
286 | ret++; | |
287 | } | |
288 | } | |
289 | ||
290 | /* Calculate and print the total size of the device */ | |
291 | this->totlen = this->numchips * (1 << this->chipshift); | |
292 | printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n", | |
293 | this->numchips ,this->totlen >> 20); | |
294 | } | |
295 | ||
296 | static int DoCMil_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2) | |
297 | { | |
298 | int tmp1, tmp2, retval; | |
299 | ||
300 | if (doc1->physadr == doc2->physadr) | |
301 | return 1; | |
302 | ||
303 | /* Use the alias resolution register which was set aside for this | |
304 | * purpose. If it's value is the same on both chips, they might | |
305 | * be the same chip, and we write to one and check for a change in | |
306 | * the other. It's unclear if this register is usuable in the | |
307 | * DoC 2000 (it's in the Millenium docs), but it seems to work. */ | |
308 | tmp1 = ReadDOC(doc1->virtadr, AliasResolution); | |
309 | tmp2 = ReadDOC(doc2->virtadr, AliasResolution); | |
310 | if (tmp1 != tmp2) | |
311 | return 0; | |
e5580fbe | 312 | |
1da177e4 LT |
313 | WriteDOC((tmp1+1) % 0xff, doc1->virtadr, AliasResolution); |
314 | tmp2 = ReadDOC(doc2->virtadr, AliasResolution); | |
315 | if (tmp2 == (tmp1+1) % 0xff) | |
316 | retval = 1; | |
317 | else | |
318 | retval = 0; | |
319 | ||
320 | /* Restore register contents. May not be necessary, but do it just to | |
321 | * be safe. */ | |
322 | WriteDOC(tmp1, doc1->virtadr, AliasResolution); | |
323 | ||
324 | return retval; | |
325 | } | |
326 | ||
5e535429 DW |
327 | /* This routine is found from the docprobe code by symbol_get(), |
328 | * which will bump the use count of this module. */ | |
329 | void DoCMil_init(struct mtd_info *mtd) | |
1da177e4 LT |
330 | { |
331 | struct DiskOnChip *this = mtd->priv; | |
332 | struct DiskOnChip *old = NULL; | |
333 | ||
334 | /* We must avoid being called twice for the same device. */ | |
335 | if (docmillist) | |
336 | old = docmillist->priv; | |
337 | ||
338 | while (old) { | |
339 | if (DoCMil_is_alias(this, old)) { | |
340 | printk(KERN_NOTICE "Ignoring DiskOnChip Millennium at " | |
341 | "0x%lX - already configured\n", this->physadr); | |
342 | iounmap(this->virtadr); | |
343 | kfree(mtd); | |
344 | return; | |
345 | } | |
346 | if (old->nextdoc) | |
347 | old = old->nextdoc->priv; | |
348 | else | |
349 | old = NULL; | |
350 | } | |
351 | ||
352 | mtd->name = "DiskOnChip Millennium"; | |
353 | printk(KERN_NOTICE "DiskOnChip Millennium found at address 0x%lX\n", | |
354 | this->physadr); | |
355 | ||
356 | mtd->type = MTD_NANDFLASH; | |
357 | mtd->flags = MTD_CAP_NANDFLASH; | |
358 | mtd->ecctype = MTD_ECC_RS_DiskOnChip; | |
359 | mtd->size = 0; | |
360 | ||
361 | /* FIXME: erase size is not always 8KiB */ | |
362 | mtd->erasesize = 0x2000; | |
363 | ||
28318776 | 364 | mtd->writesize = 512; |
1da177e4 LT |
365 | mtd->oobsize = 16; |
366 | mtd->owner = THIS_MODULE; | |
367 | mtd->erase = doc_erase; | |
368 | mtd->point = NULL; | |
369 | mtd->unpoint = NULL; | |
370 | mtd->read = doc_read; | |
371 | mtd->write = doc_write; | |
1da177e4 LT |
372 | mtd->read_oob = doc_read_oob; |
373 | mtd->write_oob = doc_write_oob; | |
374 | mtd->sync = NULL; | |
375 | ||
376 | this->totlen = 0; | |
377 | this->numchips = 0; | |
378 | this->curfloor = -1; | |
379 | this->curchip = -1; | |
380 | ||
381 | /* Ident all the chips present. */ | |
382 | DoC_ScanChips(this); | |
383 | ||
384 | if (!this->totlen) { | |
385 | kfree(mtd); | |
386 | iounmap(this->virtadr); | |
387 | } else { | |
388 | this->nextdoc = docmillist; | |
389 | docmillist = mtd; | |
390 | mtd->size = this->totlen; | |
391 | add_mtd_device(mtd); | |
392 | return; | |
393 | } | |
394 | } | |
f0ad11d0 | 395 | EXPORT_SYMBOL_GPL(DoCMil_init); |
1da177e4 LT |
396 | |
397 | static int doc_read (struct mtd_info *mtd, loff_t from, size_t len, | |
398 | size_t *retlen, u_char *buf) | |
399 | { | |
400 | /* Just a special case of doc_read_ecc */ | |
401 | return doc_read_ecc(mtd, from, len, retlen, buf, NULL, NULL); | |
402 | } | |
403 | ||
404 | static int doc_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, | |
405 | size_t *retlen, u_char *buf, u_char *eccbuf, | |
406 | struct nand_oobinfo *oobsel) | |
407 | { | |
408 | int i, ret; | |
409 | volatile char dummy; | |
410 | unsigned char syndrome[6]; | |
411 | struct DiskOnChip *this = mtd->priv; | |
412 | void __iomem *docptr = this->virtadr; | |
413 | struct Nand *mychip = &this->chips[from >> (this->chipshift)]; | |
414 | ||
415 | /* Don't allow read past end of device */ | |
416 | if (from >= this->totlen) | |
417 | return -EINVAL; | |
418 | ||
419 | /* Don't allow a single read to cross a 512-byte block boundary */ | |
e5580fbe | 420 | if (from + len > ((from | 0x1ff) + 1)) |
1da177e4 LT |
421 | len = ((from | 0x1ff) + 1) - from; |
422 | ||
423 | /* Find the chip which is to be used and select it */ | |
424 | if (this->curfloor != mychip->floor) { | |
425 | DoC_SelectFloor(docptr, mychip->floor); | |
426 | DoC_SelectChip(docptr, mychip->chip); | |
427 | } else if (this->curchip != mychip->chip) { | |
428 | DoC_SelectChip(docptr, mychip->chip); | |
429 | } | |
430 | this->curfloor = mychip->floor; | |
431 | this->curchip = mychip->chip; | |
432 | ||
433 | /* issue the Read0 or Read1 command depend on which half of the page | |
434 | we are accessing. Polling the Flash Ready bit after issue 3 bytes | |
435 | address in Sequence Read Mode, see Software Requirement 11.4 item 1.*/ | |
436 | DoC_Command(docptr, (from >> 8) & 1, CDSN_CTRL_WP); | |
437 | DoC_Address(docptr, 3, from, CDSN_CTRL_WP, 0x00); | |
438 | DoC_WaitReady(docptr); | |
439 | ||
440 | if (eccbuf) { | |
441 | /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/ | |
442 | WriteDOC (DOC_ECC_RESET, docptr, ECCConf); | |
443 | WriteDOC (DOC_ECC_EN, docptr, ECCConf); | |
444 | } else { | |
445 | /* disable the ECC engine */ | |
446 | WriteDOC (DOC_ECC_RESET, docptr, ECCConf); | |
447 | WriteDOC (DOC_ECC_DIS, docptr, ECCConf); | |
448 | } | |
449 | ||
450 | /* Read the data via the internal pipeline through CDSN IO register, | |
451 | see Pipelined Read Operations 11.3 */ | |
452 | dummy = ReadDOC(docptr, ReadPipeInit); | |
453 | #ifndef USE_MEMCPY | |
454 | for (i = 0; i < len-1; i++) { | |
455 | /* N.B. you have to increase the source address in this way or the | |
456 | ECC logic will not work properly */ | |
457 | buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff)); | |
458 | } | |
459 | #else | |
460 | memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1); | |
461 | #endif | |
462 | buf[len - 1] = ReadDOC(docptr, LastDataRead); | |
463 | ||
464 | /* Let the caller know we completed it */ | |
465 | *retlen = len; | |
466 | ret = 0; | |
467 | ||
468 | if (eccbuf) { | |
469 | /* Read the ECC data from Spare Data Area, | |
470 | see Reed-Solomon EDC/ECC 11.1 */ | |
471 | dummy = ReadDOC(docptr, ReadPipeInit); | |
472 | #ifndef USE_MEMCPY | |
473 | for (i = 0; i < 5; i++) { | |
474 | /* N.B. you have to increase the source address in this way or the | |
475 | ECC logic will not work properly */ | |
476 | eccbuf[i] = ReadDOC(docptr, Mil_CDSN_IO + i); | |
477 | } | |
478 | #else | |
479 | memcpy_fromio(eccbuf, docptr + DoC_Mil_CDSN_IO, 5); | |
480 | #endif | |
481 | eccbuf[5] = ReadDOC(docptr, LastDataRead); | |
482 | ||
483 | /* Flush the pipeline */ | |
484 | dummy = ReadDOC(docptr, ECCConf); | |
485 | dummy = ReadDOC(docptr, ECCConf); | |
486 | ||
487 | /* Check the ECC Status */ | |
488 | if (ReadDOC(docptr, ECCConf) & 0x80) { | |
489 | int nb_errors; | |
490 | /* There was an ECC error */ | |
491 | #ifdef ECC_DEBUG | |
492 | printk("DiskOnChip ECC Error: Read at %lx\n", (long)from); | |
493 | #endif | |
494 | /* Read the ECC syndrom through the DiskOnChip ECC logic. | |
495 | These syndrome will be all ZERO when there is no error */ | |
496 | for (i = 0; i < 6; i++) { | |
497 | syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i); | |
498 | } | |
499 | nb_errors = doc_decode_ecc(buf, syndrome); | |
500 | #ifdef ECC_DEBUG | |
501 | printk("ECC Errors corrected: %x\n", nb_errors); | |
502 | #endif | |
503 | if (nb_errors < 0) { | |
504 | /* We return error, but have actually done the read. Not that | |
505 | this can be told to user-space, via sys_read(), but at least | |
506 | MTD-aware stuff can know about it by checking *retlen */ | |
507 | ret = -EIO; | |
508 | } | |
509 | } | |
510 | ||
511 | #ifdef PSYCHO_DEBUG | |
512 | printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", | |
513 | (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], | |
514 | eccbuf[4], eccbuf[5]); | |
515 | #endif | |
516 | ||
517 | /* disable the ECC engine */ | |
518 | WriteDOC(DOC_ECC_DIS, docptr , ECCConf); | |
519 | } | |
520 | ||
521 | return ret; | |
522 | } | |
523 | ||
524 | static int doc_write (struct mtd_info *mtd, loff_t to, size_t len, | |
525 | size_t *retlen, const u_char *buf) | |
526 | { | |
527 | char eccbuf[6]; | |
528 | return doc_write_ecc(mtd, to, len, retlen, buf, eccbuf, NULL); | |
529 | } | |
530 | ||
531 | static int doc_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, | |
532 | size_t *retlen, const u_char *buf, u_char *eccbuf, | |
533 | struct nand_oobinfo *oobsel) | |
534 | { | |
535 | int i,ret = 0; | |
536 | volatile char dummy; | |
537 | struct DiskOnChip *this = mtd->priv; | |
538 | void __iomem *docptr = this->virtadr; | |
539 | struct Nand *mychip = &this->chips[to >> (this->chipshift)]; | |
540 | ||
541 | /* Don't allow write past end of device */ | |
542 | if (to >= this->totlen) | |
543 | return -EINVAL; | |
544 | ||
545 | #if 0 | |
546 | /* Don't allow a single write to cross a 512-byte block boundary */ | |
e5580fbe | 547 | if (to + len > ( (to | 0x1ff) + 1)) |
1da177e4 LT |
548 | len = ((to | 0x1ff) + 1) - to; |
549 | #else | |
550 | /* Don't allow writes which aren't exactly one block */ | |
551 | if (to & 0x1ff || len != 0x200) | |
552 | return -EINVAL; | |
553 | #endif | |
554 | ||
555 | /* Find the chip which is to be used and select it */ | |
556 | if (this->curfloor != mychip->floor) { | |
557 | DoC_SelectFloor(docptr, mychip->floor); | |
558 | DoC_SelectChip(docptr, mychip->chip); | |
559 | } else if (this->curchip != mychip->chip) { | |
560 | DoC_SelectChip(docptr, mychip->chip); | |
561 | } | |
562 | this->curfloor = mychip->floor; | |
563 | this->curchip = mychip->chip; | |
564 | ||
565 | /* Reset the chip, see Software Requirement 11.4 item 1. */ | |
566 | DoC_Command(docptr, NAND_CMD_RESET, 0x00); | |
567 | DoC_WaitReady(docptr); | |
568 | /* Set device to main plane of flash */ | |
569 | DoC_Command(docptr, NAND_CMD_READ0, 0x00); | |
570 | ||
571 | /* issue the Serial Data In command to initial the Page Program process */ | |
572 | DoC_Command(docptr, NAND_CMD_SEQIN, 0x00); | |
573 | DoC_Address(docptr, 3, to, 0x00, 0x00); | |
574 | DoC_WaitReady(docptr); | |
575 | ||
576 | if (eccbuf) { | |
577 | /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/ | |
578 | WriteDOC (DOC_ECC_RESET, docptr, ECCConf); | |
579 | WriteDOC (DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf); | |
580 | } else { | |
581 | /* disable the ECC engine */ | |
582 | WriteDOC (DOC_ECC_RESET, docptr, ECCConf); | |
583 | WriteDOC (DOC_ECC_DIS, docptr, ECCConf); | |
584 | } | |
585 | ||
586 | /* Write the data via the internal pipeline through CDSN IO register, | |
587 | see Pipelined Write Operations 11.2 */ | |
588 | #ifndef USE_MEMCPY | |
589 | for (i = 0; i < len; i++) { | |
590 | /* N.B. you have to increase the source address in this way or the | |
591 | ECC logic will not work properly */ | |
592 | WriteDOC(buf[i], docptr, Mil_CDSN_IO + i); | |
593 | } | |
594 | #else | |
595 | memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len); | |
596 | #endif | |
597 | WriteDOC(0x00, docptr, WritePipeTerm); | |
598 | ||
599 | if (eccbuf) { | |
600 | /* Write ECC data to flash, the ECC info is generated by the DiskOnChip ECC logic | |
601 | see Reed-Solomon EDC/ECC 11.1 */ | |
602 | WriteDOC(0, docptr, NOP); | |
603 | WriteDOC(0, docptr, NOP); | |
604 | WriteDOC(0, docptr, NOP); | |
605 | ||
606 | /* Read the ECC data through the DiskOnChip ECC logic */ | |
607 | for (i = 0; i < 6; i++) { | |
608 | eccbuf[i] = ReadDOC(docptr, ECCSyndrome0 + i); | |
609 | } | |
610 | ||
611 | /* ignore the ECC engine */ | |
612 | WriteDOC(DOC_ECC_DIS, docptr , ECCConf); | |
613 | ||
614 | #ifndef USE_MEMCPY | |
615 | /* Write the ECC data to flash */ | |
616 | for (i = 0; i < 6; i++) { | |
617 | /* N.B. you have to increase the source address in this way or the | |
618 | ECC logic will not work properly */ | |
619 | WriteDOC(eccbuf[i], docptr, Mil_CDSN_IO + i); | |
620 | } | |
621 | #else | |
622 | memcpy_toio(docptr + DoC_Mil_CDSN_IO, eccbuf, 6); | |
623 | #endif | |
624 | ||
625 | /* write the block status BLOCK_USED (0x5555) at the end of ECC data | |
626 | FIXME: this is only a hack for programming the IPL area for LinuxBIOS | |
e5580fbe | 627 | and should be replace with proper codes in user space utilities */ |
1da177e4 LT |
628 | WriteDOC(0x55, docptr, Mil_CDSN_IO); |
629 | WriteDOC(0x55, docptr, Mil_CDSN_IO + 1); | |
630 | ||
631 | WriteDOC(0x00, docptr, WritePipeTerm); | |
632 | ||
633 | #ifdef PSYCHO_DEBUG | |
634 | printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", | |
635 | (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], | |
636 | eccbuf[4], eccbuf[5]); | |
637 | #endif | |
638 | } | |
639 | ||
640 | /* Commit the Page Program command and wait for ready | |
641 | see Software Requirement 11.4 item 1.*/ | |
642 | DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00); | |
643 | DoC_WaitReady(docptr); | |
644 | ||
645 | /* Read the status of the flash device through CDSN IO register | |
646 | see Software Requirement 11.4 item 5.*/ | |
647 | DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP); | |
648 | dummy = ReadDOC(docptr, ReadPipeInit); | |
649 | DoC_Delay(docptr, 2); | |
650 | if (ReadDOC(docptr, Mil_CDSN_IO) & 1) { | |
651 | printk("Error programming flash\n"); | |
652 | /* Error in programming | |
653 | FIXME: implement Bad Block Replacement (in nftl.c ??) */ | |
654 | *retlen = 0; | |
655 | ret = -EIO; | |
656 | } | |
657 | dummy = ReadDOC(docptr, LastDataRead); | |
658 | ||
659 | /* Let the caller know we completed it */ | |
660 | *retlen = len; | |
661 | ||
662 | return ret; | |
663 | } | |
664 | ||
665 | static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len, | |
666 | size_t *retlen, u_char *buf) | |
667 | { | |
668 | #ifndef USE_MEMCPY | |
669 | int i; | |
670 | #endif | |
671 | volatile char dummy; | |
672 | struct DiskOnChip *this = mtd->priv; | |
673 | void __iomem *docptr = this->virtadr; | |
674 | struct Nand *mychip = &this->chips[ofs >> this->chipshift]; | |
675 | ||
676 | /* Find the chip which is to be used and select it */ | |
677 | if (this->curfloor != mychip->floor) { | |
678 | DoC_SelectFloor(docptr, mychip->floor); | |
679 | DoC_SelectChip(docptr, mychip->chip); | |
680 | } else if (this->curchip != mychip->chip) { | |
681 | DoC_SelectChip(docptr, mychip->chip); | |
682 | } | |
683 | this->curfloor = mychip->floor; | |
684 | this->curchip = mychip->chip; | |
685 | ||
686 | /* disable the ECC engine */ | |
687 | WriteDOC (DOC_ECC_RESET, docptr, ECCConf); | |
688 | WriteDOC (DOC_ECC_DIS, docptr, ECCConf); | |
689 | ||
690 | /* issue the Read2 command to set the pointer to the Spare Data Area. | |
691 | Polling the Flash Ready bit after issue 3 bytes address in | |
692 | Sequence Read Mode, see Software Requirement 11.4 item 1.*/ | |
693 | DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP); | |
694 | DoC_Address(docptr, 3, ofs, CDSN_CTRL_WP, 0x00); | |
695 | DoC_WaitReady(docptr); | |
696 | ||
697 | /* Read the data out via the internal pipeline through CDSN IO register, | |
698 | see Pipelined Read Operations 11.3 */ | |
699 | dummy = ReadDOC(docptr, ReadPipeInit); | |
700 | #ifndef USE_MEMCPY | |
701 | for (i = 0; i < len-1; i++) { | |
702 | /* N.B. you have to increase the source address in this way or the | |
703 | ECC logic will not work properly */ | |
704 | buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i); | |
705 | } | |
706 | #else | |
707 | memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1); | |
708 | #endif | |
709 | buf[len - 1] = ReadDOC(docptr, LastDataRead); | |
710 | ||
711 | *retlen = len; | |
712 | ||
713 | return 0; | |
714 | } | |
715 | ||
716 | static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len, | |
717 | size_t *retlen, const u_char *buf) | |
718 | { | |
719 | #ifndef USE_MEMCPY | |
720 | int i; | |
721 | #endif | |
722 | volatile char dummy; | |
723 | int ret = 0; | |
724 | struct DiskOnChip *this = mtd->priv; | |
725 | void __iomem *docptr = this->virtadr; | |
726 | struct Nand *mychip = &this->chips[ofs >> this->chipshift]; | |
727 | ||
728 | /* Find the chip which is to be used and select it */ | |
729 | if (this->curfloor != mychip->floor) { | |
730 | DoC_SelectFloor(docptr, mychip->floor); | |
731 | DoC_SelectChip(docptr, mychip->chip); | |
732 | } else if (this->curchip != mychip->chip) { | |
733 | DoC_SelectChip(docptr, mychip->chip); | |
734 | } | |
735 | this->curfloor = mychip->floor; | |
736 | this->curchip = mychip->chip; | |
737 | ||
738 | /* disable the ECC engine */ | |
739 | WriteDOC (DOC_ECC_RESET, docptr, ECCConf); | |
740 | WriteDOC (DOC_ECC_DIS, docptr, ECCConf); | |
741 | ||
742 | /* Reset the chip, see Software Requirement 11.4 item 1. */ | |
743 | DoC_Command(docptr, NAND_CMD_RESET, CDSN_CTRL_WP); | |
744 | DoC_WaitReady(docptr); | |
745 | /* issue the Read2 command to set the pointer to the Spare Data Area. */ | |
746 | DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP); | |
747 | ||
748 | /* issue the Serial Data In command to initial the Page Program process */ | |
749 | DoC_Command(docptr, NAND_CMD_SEQIN, 0x00); | |
750 | DoC_Address(docptr, 3, ofs, 0x00, 0x00); | |
751 | ||
752 | /* Write the data via the internal pipeline through CDSN IO register, | |
753 | see Pipelined Write Operations 11.2 */ | |
754 | #ifndef USE_MEMCPY | |
755 | for (i = 0; i < len; i++) { | |
756 | /* N.B. you have to increase the source address in this way or the | |
757 | ECC logic will not work properly */ | |
758 | WriteDOC(buf[i], docptr, Mil_CDSN_IO + i); | |
759 | } | |
760 | #else | |
761 | memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len); | |
762 | #endif | |
763 | WriteDOC(0x00, docptr, WritePipeTerm); | |
764 | ||
765 | /* Commit the Page Program command and wait for ready | |
766 | see Software Requirement 11.4 item 1.*/ | |
767 | DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00); | |
768 | DoC_WaitReady(docptr); | |
769 | ||
770 | /* Read the status of the flash device through CDSN IO register | |
771 | see Software Requirement 11.4 item 5.*/ | |
772 | DoC_Command(docptr, NAND_CMD_STATUS, 0x00); | |
773 | dummy = ReadDOC(docptr, ReadPipeInit); | |
774 | DoC_Delay(docptr, 2); | |
775 | if (ReadDOC(docptr, Mil_CDSN_IO) & 1) { | |
776 | printk("Error programming oob data\n"); | |
777 | /* FIXME: implement Bad Block Replacement (in nftl.c ??) */ | |
778 | *retlen = 0; | |
779 | ret = -EIO; | |
780 | } | |
781 | dummy = ReadDOC(docptr, LastDataRead); | |
782 | ||
783 | *retlen = len; | |
784 | ||
785 | return ret; | |
786 | } | |
787 | ||
788 | int doc_erase (struct mtd_info *mtd, struct erase_info *instr) | |
789 | { | |
790 | volatile char dummy; | |
791 | struct DiskOnChip *this = mtd->priv; | |
792 | __u32 ofs = instr->addr; | |
793 | __u32 len = instr->len; | |
794 | void __iomem *docptr = this->virtadr; | |
795 | struct Nand *mychip = &this->chips[ofs >> this->chipshift]; | |
796 | ||
e5580fbe | 797 | if (len != mtd->erasesize) |
1da177e4 LT |
798 | printk(KERN_WARNING "Erase not right size (%x != %x)n", |
799 | len, mtd->erasesize); | |
800 | ||
801 | /* Find the chip which is to be used and select it */ | |
802 | if (this->curfloor != mychip->floor) { | |
803 | DoC_SelectFloor(docptr, mychip->floor); | |
804 | DoC_SelectChip(docptr, mychip->chip); | |
805 | } else if (this->curchip != mychip->chip) { | |
806 | DoC_SelectChip(docptr, mychip->chip); | |
807 | } | |
808 | this->curfloor = mychip->floor; | |
809 | this->curchip = mychip->chip; | |
810 | ||
811 | instr->state = MTD_ERASE_PENDING; | |
812 | ||
813 | /* issue the Erase Setup command */ | |
814 | DoC_Command(docptr, NAND_CMD_ERASE1, 0x00); | |
815 | DoC_Address(docptr, 2, ofs, 0x00, 0x00); | |
816 | ||
817 | /* Commit the Erase Start command and wait for ready | |
818 | see Software Requirement 11.4 item 1.*/ | |
819 | DoC_Command(docptr, NAND_CMD_ERASE2, 0x00); | |
820 | DoC_WaitReady(docptr); | |
821 | ||
822 | instr->state = MTD_ERASING; | |
823 | ||
824 | /* Read the status of the flash device through CDSN IO register | |
825 | see Software Requirement 11.4 item 5. | |
826 | FIXME: it seems that we are not wait long enough, some blocks are not | |
827 | erased fully */ | |
828 | DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP); | |
829 | dummy = ReadDOC(docptr, ReadPipeInit); | |
830 | DoC_Delay(docptr, 2); | |
831 | if (ReadDOC(docptr, Mil_CDSN_IO) & 1) { | |
832 | printk("Error Erasing at 0x%x\n", ofs); | |
833 | /* There was an error | |
834 | FIXME: implement Bad Block Replacement (in nftl.c ??) */ | |
835 | instr->state = MTD_ERASE_FAILED; | |
836 | } else | |
837 | instr->state = MTD_ERASE_DONE; | |
838 | dummy = ReadDOC(docptr, LastDataRead); | |
839 | ||
840 | mtd_erase_callback(instr); | |
841 | ||
842 | return 0; | |
843 | } | |
844 | ||
845 | /**************************************************************************** | |
846 | * | |
847 | * Module stuff | |
848 | * | |
849 | ****************************************************************************/ | |
850 | ||
1da177e4 LT |
851 | static void __exit cleanup_doc2001(void) |
852 | { | |
853 | struct mtd_info *mtd; | |
854 | struct DiskOnChip *this; | |
855 | ||
856 | while ((mtd=docmillist)) { | |
857 | this = mtd->priv; | |
858 | docmillist = this->nextdoc; | |
e5580fbe | 859 | |
1da177e4 | 860 | del_mtd_device(mtd); |
e5580fbe | 861 | |
1da177e4 LT |
862 | iounmap(this->virtadr); |
863 | kfree(this->chips); | |
864 | kfree(mtd); | |
865 | } | |
1da177e4 LT |
866 | } |
867 | ||
868 | module_exit(cleanup_doc2001); | |
1da177e4 LT |
869 | |
870 | MODULE_LICENSE("GPL"); | |
871 | MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al."); | |
872 | MODULE_DESCRIPTION("Alternative driver for DiskOnChip Millennium"); |