]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* 3c503.c: A shared-memory NS8390 ethernet driver for linux. */ |
2 | /* | |
3 | Written 1992-94 by Donald Becker. | |
4 | ||
5 | Copyright 1993 United States Government as represented by the | |
6 | Director, National Security Agency. This software may be used and | |
7 | distributed according to the terms of the GNU General Public License, | |
8 | incorporated herein by reference. | |
9 | ||
10 | The author may be reached as becker@scyld.com, or C/O | |
11 | Scyld Computing Corporation | |
12 | 410 Severn Ave., Suite 210 | |
13 | Annapolis MD 21403 | |
14 | ||
15 | ||
16 | This driver should work with the 3c503 and 3c503/16. It should be used | |
17 | in shared memory mode for best performance, although it may also work | |
18 | in programmed-I/O mode. | |
19 | ||
20 | Sources: | |
21 | EtherLink II Technical Reference Manual, | |
22 | EtherLink II/16 Technical Reference Manual Supplement, | |
23 | 3Com Corporation, 5400 Bayfront Plaza, Santa Clara CA 95052-8145 | |
24 | ||
25 | The Crynwr 3c503 packet driver. | |
26 | ||
27 | Changelog: | |
28 | ||
29 | Paul Gortmaker : add support for the 2nd 8kB of RAM on 16 bit cards. | |
30 | Paul Gortmaker : multiple card support for module users. | |
31 | rjohnson@analogic.com : Fix up PIO interface for efficient operation. | |
32 | Jeff Garzik : ethtool support | |
33 | ||
34 | */ | |
35 | ||
36 | #define DRV_NAME "3c503" | |
37 | #define DRV_VERSION "1.10a" | |
38 | #define DRV_RELDATE "11/17/2001" | |
39 | ||
40 | ||
41 | static const char version[] = | |
42 | DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Donald Becker (becker@scyld.com)\n"; | |
43 | ||
44 | #include <linux/module.h> | |
45 | #include <linux/kernel.h> | |
46 | #include <linux/errno.h> | |
47 | #include <linux/string.h> | |
48 | #include <linux/delay.h> | |
49 | #include <linux/netdevice.h> | |
50 | #include <linux/etherdevice.h> | |
51 | #include <linux/init.h> | |
52 | #include <linux/ethtool.h> | |
53 | ||
54 | #include <asm/uaccess.h> | |
55 | #include <asm/io.h> | |
56 | #include <asm/system.h> | |
57 | #include <asm/byteorder.h> | |
58 | ||
59 | #include "8390.h" | |
60 | #include "3c503.h" | |
61 | #define WRD_COUNT 4 | |
62 | ||
63 | static int el2_pio_probe(struct net_device *dev); | |
64 | static int el2_probe1(struct net_device *dev, int ioaddr); | |
65 | ||
66 | /* A zero-terminated list of I/O addresses to be probed in PIO mode. */ | |
67 | static unsigned int netcard_portlist[] __initdata = | |
68 | { 0x300,0x310,0x330,0x350,0x250,0x280,0x2a0,0x2e0,0}; | |
69 | ||
70 | #define EL2_IO_EXTENT 16 | |
71 | ||
72 | static int el2_open(struct net_device *dev); | |
73 | static int el2_close(struct net_device *dev); | |
74 | static void el2_reset_8390(struct net_device *dev); | |
75 | static void el2_init_card(struct net_device *dev); | |
76 | static void el2_block_output(struct net_device *dev, int count, | |
77 | const unsigned char *buf, int start_page); | |
78 | static void el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, | |
79 | int ring_offset); | |
80 | static void el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, | |
81 | int ring_page); | |
82 | static struct ethtool_ops netdev_ethtool_ops; | |
83 | ||
84 | \f | |
85 | /* This routine probes for a memory-mapped 3c503 board by looking for | |
86 | the "location register" at the end of the jumpered boot PROM space. | |
87 | This works even if a PROM isn't there. | |
88 | ||
89 | If the ethercard isn't found there is an optional probe for | |
90 | ethercard jumpered to programmed-I/O mode. | |
91 | */ | |
92 | static int __init do_el2_probe(struct net_device *dev) | |
93 | { | |
94 | int *addr, addrs[] = { 0xddffe, 0xd9ffe, 0xcdffe, 0xc9ffe, 0}; | |
95 | int base_addr = dev->base_addr; | |
96 | int irq = dev->irq; | |
97 | ||
98 | SET_MODULE_OWNER(dev); | |
99 | ||
100 | if (base_addr > 0x1ff) /* Check a single specified location. */ | |
101 | return el2_probe1(dev, base_addr); | |
102 | else if (base_addr != 0) /* Don't probe at all. */ | |
103 | return -ENXIO; | |
104 | ||
105 | for (addr = addrs; *addr; addr++) { | |
106 | void __iomem *p = ioremap(*addr, 1); | |
107 | unsigned base_bits; | |
108 | int i; | |
109 | ||
110 | if (!p) | |
111 | continue; | |
112 | base_bits = readb(p); | |
113 | iounmap(p); | |
114 | i = ffs(base_bits) - 1; | |
115 | if (i == -1 || base_bits != (1 << i)) | |
116 | continue; | |
117 | if (el2_probe1(dev, netcard_portlist[i]) == 0) | |
118 | return 0; | |
119 | dev->irq = irq; | |
120 | } | |
121 | #if ! defined(no_probe_nonshared_memory) | |
122 | return el2_pio_probe(dev); | |
123 | #else | |
124 | return -ENODEV; | |
125 | #endif | |
126 | } | |
127 | ||
128 | /* Try all of the locations that aren't obviously empty. This touches | |
129 | a lot of locations, and is much riskier than the code above. */ | |
130 | static int __init | |
131 | el2_pio_probe(struct net_device *dev) | |
132 | { | |
133 | int i; | |
134 | int base_addr = dev->base_addr; | |
135 | int irq = dev->irq; | |
136 | ||
137 | if (base_addr > 0x1ff) /* Check a single specified location. */ | |
138 | return el2_probe1(dev, base_addr); | |
139 | else if (base_addr != 0) /* Don't probe at all. */ | |
140 | return -ENXIO; | |
141 | ||
142 | for (i = 0; netcard_portlist[i]; i++) { | |
143 | if (el2_probe1(dev, netcard_portlist[i]) == 0) | |
144 | return 0; | |
145 | dev->irq = irq; | |
146 | } | |
147 | ||
148 | return -ENODEV; | |
149 | } | |
150 | ||
1da177e4 LT |
151 | #ifndef MODULE |
152 | struct net_device * __init el2_probe(int unit) | |
153 | { | |
154 | struct net_device *dev = alloc_ei_netdev(); | |
155 | int err; | |
156 | ||
157 | if (!dev) | |
158 | return ERR_PTR(-ENOMEM); | |
159 | ||
160 | sprintf(dev->name, "eth%d", unit); | |
161 | netdev_boot_setup_check(dev); | |
162 | ||
163 | err = do_el2_probe(dev); | |
164 | if (err) | |
165 | goto out; | |
1da177e4 | 166 | return dev; |
1da177e4 LT |
167 | out: |
168 | free_netdev(dev); | |
169 | return ERR_PTR(err); | |
170 | } | |
171 | #endif | |
172 | ||
173 | /* Probe for the Etherlink II card at I/O port base IOADDR, | |
174 | returning non-zero on success. If found, set the station | |
175 | address and memory parameters in DEVICE. */ | |
176 | static int __init | |
177 | el2_probe1(struct net_device *dev, int ioaddr) | |
178 | { | |
179 | int i, iobase_reg, membase_reg, saved_406, wordlength, retval; | |
180 | static unsigned version_printed; | |
181 | unsigned long vendor_id; | |
182 | ||
183 | if (!request_region(ioaddr, EL2_IO_EXTENT, DRV_NAME)) | |
184 | return -EBUSY; | |
185 | ||
186 | if (!request_region(ioaddr + 0x400, 8, DRV_NAME)) { | |
187 | retval = -EBUSY; | |
188 | goto out; | |
189 | } | |
190 | ||
191 | /* Reset and/or avoid any lurking NE2000 */ | |
192 | if (inb(ioaddr + 0x408) == 0xff) { | |
193 | mdelay(1); | |
194 | retval = -ENODEV; | |
195 | goto out1; | |
196 | } | |
197 | ||
198 | /* We verify that it's a 3C503 board by checking the first three octets | |
199 | of its ethernet address. */ | |
200 | iobase_reg = inb(ioaddr+0x403); | |
201 | membase_reg = inb(ioaddr+0x404); | |
202 | /* ASIC location registers should be 0 or have only a single bit set. */ | |
203 | if ( (iobase_reg & (iobase_reg - 1)) | |
204 | || (membase_reg & (membase_reg - 1))) { | |
205 | retval = -ENODEV; | |
206 | goto out1; | |
207 | } | |
208 | saved_406 = inb_p(ioaddr + 0x406); | |
209 | outb_p(ECNTRL_RESET|ECNTRL_THIN, ioaddr + 0x406); /* Reset it... */ | |
210 | outb_p(ECNTRL_THIN, ioaddr + 0x406); | |
211 | /* Map the station addr PROM into the lower I/O ports. We now check | |
212 | for both the old and new 3Com prefix */ | |
213 | outb(ECNTRL_SAPROM|ECNTRL_THIN, ioaddr + 0x406); | |
214 | vendor_id = inb(ioaddr)*0x10000 + inb(ioaddr + 1)*0x100 + inb(ioaddr + 2); | |
215 | if ((vendor_id != OLD_3COM_ID) && (vendor_id != NEW_3COM_ID)) { | |
216 | /* Restore the register we frobbed. */ | |
217 | outb(saved_406, ioaddr + 0x406); | |
218 | retval = -ENODEV; | |
219 | goto out1; | |
220 | } | |
221 | ||
222 | if (ei_debug && version_printed++ == 0) | |
223 | printk(version); | |
224 | ||
225 | dev->base_addr = ioaddr; | |
226 | ||
227 | printk("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr); | |
228 | ||
229 | /* Retrieve and print the ethernet address. */ | |
230 | for (i = 0; i < 6; i++) | |
231 | printk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i)); | |
232 | ||
233 | /* Map the 8390 back into the window. */ | |
234 | outb(ECNTRL_THIN, ioaddr + 0x406); | |
235 | ||
236 | /* Check for EL2/16 as described in tech. man. */ | |
237 | outb_p(E8390_PAGE0, ioaddr + E8390_CMD); | |
238 | outb_p(0, ioaddr + EN0_DCFG); | |
239 | outb_p(E8390_PAGE2, ioaddr + E8390_CMD); | |
240 | wordlength = inb_p(ioaddr + EN0_DCFG) & ENDCFG_WTS; | |
241 | outb_p(E8390_PAGE0, ioaddr + E8390_CMD); | |
242 | ||
243 | /* Probe for, turn on and clear the board's shared memory. */ | |
244 | if (ei_debug > 2) printk(" memory jumpers %2.2x ", membase_reg); | |
245 | outb(EGACFR_NORM, ioaddr + 0x405); /* Enable RAM */ | |
246 | ||
247 | /* This should be probed for (or set via an ioctl()) at run-time. | |
248 | Right now we use a sleazy hack to pass in the interface number | |
249 | at boot-time via the low bits of the mem_end field. That value is | |
250 | unused, and the low bits would be discarded even if it was used. */ | |
251 | #if defined(EI8390_THICK) || defined(EL2_AUI) | |
252 | ei_status.interface_num = 1; | |
253 | #else | |
254 | ei_status.interface_num = dev->mem_end & 0xf; | |
255 | #endif | |
256 | printk(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex"); | |
257 | ||
258 | if ((membase_reg & 0xf0) == 0) { | |
259 | dev->mem_start = 0; | |
260 | ei_status.name = "3c503-PIO"; | |
261 | ei_status.mem = NULL; | |
262 | } else { | |
263 | dev->mem_start = ((membase_reg & 0xc0) ? 0xD8000 : 0xC8000) + | |
264 | ((membase_reg & 0xA0) ? 0x4000 : 0); | |
265 | #define EL2_MEMSIZE (EL2_MB1_STOP_PG - EL2_MB1_START_PG)*256 | |
266 | ei_status.mem = ioremap(dev->mem_start, EL2_MEMSIZE); | |
267 | ||
268 | #ifdef EL2MEMTEST | |
269 | /* This has never found an error, but someone might care. | |
270 | Note that it only tests the 2nd 8kB on 16kB 3c503/16 | |
271 | cards between card addr. 0x2000 and 0x3fff. */ | |
272 | { /* Check the card's memory. */ | |
273 | void __iomem *mem_base = ei_status.mem; | |
274 | unsigned int test_val = 0xbbadf00d; | |
275 | writel(0xba5eba5e, mem_base); | |
276 | for (i = sizeof(test_val); i < EL2_MEMSIZE; i+=sizeof(test_val)) { | |
277 | writel(test_val, mem_base + i); | |
278 | if (readl(mem_base) != 0xba5eba5e | |
279 | || readl(mem_base + i) != test_val) { | |
280 | printk("3c503: memory failure or memory address conflict.\n"); | |
281 | dev->mem_start = 0; | |
282 | ei_status.name = "3c503-PIO"; | |
283 | iounmap(mem_base); | |
284 | ei_status.mem = NULL; | |
285 | break; | |
286 | } | |
287 | test_val += 0x55555555; | |
288 | writel(0, mem_base + i); | |
289 | } | |
290 | } | |
291 | #endif /* EL2MEMTEST */ | |
292 | ||
293 | if (dev->mem_start) | |
294 | dev->mem_end = dev->mem_start + EL2_MEMSIZE; | |
295 | ||
296 | if (wordlength) { /* No Tx pages to skip over to get to Rx */ | |
297 | ei_status.priv = 0; | |
298 | ei_status.name = "3c503/16"; | |
299 | } else { | |
300 | ei_status.priv = TX_PAGES * 256; | |
301 | ei_status.name = "3c503"; | |
302 | } | |
303 | } | |
304 | ||
305 | /* | |
306 | Divide up the memory on the card. This is the same regardless of | |
307 | whether shared-mem or PIO is used. For 16 bit cards (16kB RAM), | |
308 | we use the entire 8k of bank1 for an Rx ring. We only use 3k | |
309 | of the bank0 for 2 full size Tx packet slots. For 8 bit cards, | |
310 | (8kB RAM) we use 3kB of bank1 for two Tx slots, and the remaining | |
311 | 5kB for an Rx ring. */ | |
312 | ||
313 | if (wordlength) { | |
314 | ei_status.tx_start_page = EL2_MB0_START_PG; | |
315 | ei_status.rx_start_page = EL2_MB1_START_PG; | |
316 | } else { | |
317 | ei_status.tx_start_page = EL2_MB1_START_PG; | |
318 | ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES; | |
319 | } | |
320 | ||
321 | /* Finish setting the board's parameters. */ | |
322 | ei_status.stop_page = EL2_MB1_STOP_PG; | |
323 | ei_status.word16 = wordlength; | |
324 | ei_status.reset_8390 = &el2_reset_8390; | |
325 | ei_status.get_8390_hdr = &el2_get_8390_hdr; | |
326 | ei_status.block_input = &el2_block_input; | |
327 | ei_status.block_output = &el2_block_output; | |
328 | ||
329 | if (dev->irq == 2) | |
330 | dev->irq = 9; | |
331 | else if (dev->irq > 5 && dev->irq != 9) { | |
332 | printk("3c503: configured interrupt %d invalid, will use autoIRQ.\n", | |
333 | dev->irq); | |
334 | dev->irq = 0; | |
335 | } | |
336 | ||
337 | ei_status.saved_irq = dev->irq; | |
338 | ||
339 | dev->open = &el2_open; | |
340 | dev->stop = &el2_close; | |
341 | dev->ethtool_ops = &netdev_ethtool_ops; | |
342 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
343 | dev->poll_controller = ei_poll; | |
344 | #endif | |
345 | ||
b1fc5505 HX |
346 | retval = register_netdev(dev); |
347 | if (retval) | |
348 | goto out1; | |
349 | ||
1da177e4 LT |
350 | if (dev->mem_start) |
351 | printk("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n", | |
352 | dev->name, ei_status.name, (wordlength+1)<<3, | |
353 | dev->mem_start, dev->mem_end-1); | |
354 | ||
355 | else | |
356 | { | |
357 | ei_status.tx_start_page = EL2_MB1_START_PG; | |
358 | ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES; | |
359 | printk("\n%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n", | |
360 | dev->name, ei_status.name, (wordlength+1)<<3); | |
361 | } | |
362 | release_region(ioaddr + 0x400, 8); | |
363 | return 0; | |
364 | out1: | |
365 | release_region(ioaddr + 0x400, 8); | |
366 | out: | |
367 | release_region(ioaddr, EL2_IO_EXTENT); | |
368 | return retval; | |
369 | } | |
370 | \f | |
371 | static int | |
372 | el2_open(struct net_device *dev) | |
373 | { | |
374 | int retval = -EAGAIN; | |
375 | ||
376 | if (dev->irq < 2) { | |
377 | int irqlist[] = {5, 9, 3, 4, 0}; | |
378 | int *irqp = irqlist; | |
379 | ||
380 | outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */ | |
381 | do { | |
382 | if (request_irq (*irqp, NULL, 0, "bogus", dev) != -EBUSY) { | |
383 | /* Twinkle the interrupt, and check if it's seen. */ | |
384 | unsigned long cookie = probe_irq_on(); | |
385 | outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR); | |
386 | outb_p(0x00, E33G_IDCFR); | |
387 | if (*irqp == probe_irq_off(cookie) /* It's a good IRQ line! */ | |
388 | && ((retval = request_irq(dev->irq = *irqp, | |
389 | ei_interrupt, 0, dev->name, dev)) == 0)) | |
390 | break; | |
391 | } | |
392 | } while (*++irqp); | |
393 | if (*irqp == 0) { | |
394 | outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ | |
395 | return retval; | |
396 | } | |
397 | } else { | |
398 | if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) { | |
399 | return retval; | |
400 | } | |
401 | } | |
402 | ||
403 | el2_init_card(dev); | |
404 | ei_open(dev); | |
405 | return 0; | |
406 | } | |
407 | ||
408 | static int | |
409 | el2_close(struct net_device *dev) | |
410 | { | |
411 | free_irq(dev->irq, dev); | |
412 | dev->irq = ei_status.saved_irq; | |
413 | outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ | |
414 | ||
415 | ei_close(dev); | |
416 | return 0; | |
417 | } | |
418 | ||
419 | /* This is called whenever we have a unrecoverable failure: | |
420 | transmit timeout | |
421 | Bad ring buffer packet header | |
422 | */ | |
423 | static void | |
424 | el2_reset_8390(struct net_device *dev) | |
425 | { | |
426 | if (ei_debug > 1) { | |
427 | printk("%s: Resetting the 3c503 board...", dev->name); | |
428 | printk("%#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR), | |
429 | E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR)); | |
430 | } | |
431 | outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL); | |
432 | ei_status.txing = 0; | |
433 | outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); | |
434 | el2_init_card(dev); | |
435 | if (ei_debug > 1) printk("done\n"); | |
436 | } | |
437 | ||
438 | /* Initialize the 3c503 GA registers after a reset. */ | |
439 | static void | |
440 | el2_init_card(struct net_device *dev) | |
441 | { | |
442 | /* Unmap the station PROM and select the DIX or BNC connector. */ | |
443 | outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); | |
444 | ||
445 | /* Set ASIC copy of rx's first and last+1 buffer pages */ | |
446 | /* These must be the same as in the 8390. */ | |
447 | outb(ei_status.rx_start_page, E33G_STARTPG); | |
448 | outb(ei_status.stop_page, E33G_STOPPG); | |
449 | ||
450 | /* Point the vector pointer registers somewhere ?harmless?. */ | |
451 | outb(0xff, E33G_VP2); /* Point at the ROM restart location 0xffff0 */ | |
452 | outb(0xff, E33G_VP1); | |
453 | outb(0x00, E33G_VP0); | |
454 | /* Turn off all interrupts until we're opened. */ | |
455 | outb_p(0x00, dev->base_addr + EN0_IMR); | |
456 | /* Enable IRQs iff started. */ | |
457 | outb(EGACFR_NORM, E33G_GACFR); | |
458 | ||
459 | /* Set the interrupt line. */ | |
460 | outb_p((0x04 << (dev->irq == 9 ? 2 : dev->irq)), E33G_IDCFR); | |
461 | outb_p((WRD_COUNT << 1), E33G_DRQCNT); /* Set burst size to 8 */ | |
462 | outb_p(0x20, E33G_DMAAH); /* Put a valid addr in the GA DMA */ | |
463 | outb_p(0x00, E33G_DMAAL); | |
464 | return; /* We always succeed */ | |
465 | } | |
466 | ||
467 | /* | |
468 | * Either use the shared memory (if enabled on the board) or put the packet | |
469 | * out through the ASIC FIFO. | |
470 | */ | |
471 | static void | |
472 | el2_block_output(struct net_device *dev, int count, | |
473 | const unsigned char *buf, int start_page) | |
474 | { | |
475 | unsigned short int *wrd; | |
476 | int boguscount; /* timeout counter */ | |
477 | unsigned short word; /* temporary for better machine code */ | |
478 | void __iomem *base = ei_status.mem; | |
479 | ||
480 | if (ei_status.word16) /* Tx packets go into bank 0 on EL2/16 card */ | |
481 | outb(EGACFR_RSEL|EGACFR_TCM, E33G_GACFR); | |
482 | else | |
483 | outb(EGACFR_NORM, E33G_GACFR); | |
484 | ||
485 | if (base) { /* Shared memory transfer */ | |
486 | memcpy_toio(base + ((start_page - ei_status.tx_start_page) << 8), | |
487 | buf, count); | |
488 | outb(EGACFR_NORM, E33G_GACFR); /* Back to bank1 in case on bank0 */ | |
489 | return; | |
490 | } | |
491 | ||
492 | /* | |
493 | * No shared memory, put the packet out the other way. | |
494 | * Set up then start the internal memory transfer to Tx Start Page | |
495 | */ | |
496 | ||
497 | word = (unsigned short)start_page; | |
498 | outb(word&0xFF, E33G_DMAAH); | |
499 | outb(word>>8, E33G_DMAAL); | |
500 | ||
501 | outb_p((ei_status.interface_num ? ECNTRL_AUI : ECNTRL_THIN ) | ECNTRL_OUTPUT | |
502 | | ECNTRL_START, E33G_CNTRL); | |
503 | ||
504 | /* | |
505 | * Here I am going to write data to the FIFO as quickly as possible. | |
506 | * Note that E33G_FIFOH is defined incorrectly. It is really | |
507 | * E33G_FIFOL, the lowest port address for both the byte and | |
508 | * word write. Variable 'count' is NOT checked. Caller must supply a | |
509 | * valid count. Note that I may write a harmless extra byte to the | |
510 | * 8390 if the byte-count was not even. | |
511 | */ | |
512 | wrd = (unsigned short int *) buf; | |
513 | count = (count + 1) >> 1; | |
514 | for(;;) | |
515 | { | |
516 | boguscount = 0x1000; | |
517 | while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) | |
518 | { | |
519 | if(!boguscount--) | |
520 | { | |
521 | printk("%s: FIFO blocked in el2_block_output.\n", dev->name); | |
522 | el2_reset_8390(dev); | |
523 | goto blocked; | |
524 | } | |
525 | } | |
526 | if(count > WRD_COUNT) | |
527 | { | |
528 | outsw(E33G_FIFOH, wrd, WRD_COUNT); | |
529 | wrd += WRD_COUNT; | |
530 | count -= WRD_COUNT; | |
531 | } | |
532 | else | |
533 | { | |
534 | outsw(E33G_FIFOH, wrd, count); | |
535 | break; | |
536 | } | |
537 | } | |
538 | blocked:; | |
539 | outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); | |
540 | return; | |
541 | } | |
542 | ||
543 | /* Read the 4 byte, page aligned 8390 specific header. */ | |
544 | static void | |
545 | el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) | |
546 | { | |
547 | int boguscount; | |
548 | void __iomem *base = ei_status.mem; | |
549 | unsigned short word; | |
550 | ||
551 | if (base) { /* Use the shared memory. */ | |
552 | void __iomem *hdr_start = base + ((ring_page - EL2_MB1_START_PG)<<8); | |
553 | memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); | |
554 | hdr->count = le16_to_cpu(hdr->count); | |
555 | return; | |
556 | } | |
557 | ||
558 | /* | |
559 | * No shared memory, use programmed I/O. | |
560 | */ | |
561 | ||
562 | word = (unsigned short)ring_page; | |
563 | outb(word&0xFF, E33G_DMAAH); | |
564 | outb(word>>8, E33G_DMAAL); | |
565 | ||
566 | outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT | |
567 | | ECNTRL_START, E33G_CNTRL); | |
568 | boguscount = 0x1000; | |
569 | while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) | |
570 | { | |
571 | if(!boguscount--) | |
572 | { | |
573 | printk("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name); | |
574 | memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr)); | |
575 | el2_reset_8390(dev); | |
576 | goto blocked; | |
577 | } | |
578 | } | |
579 | insw(E33G_FIFOH, hdr, (sizeof(struct e8390_pkt_hdr))>> 1); | |
580 | blocked:; | |
581 | outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); | |
582 | } | |
583 | ||
584 | ||
585 | static void | |
586 | el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) | |
587 | { | |
588 | int boguscount = 0; | |
589 | void __iomem *base = ei_status.mem; | |
590 | unsigned short int *buf; | |
591 | unsigned short word; | |
592 | ||
593 | /* Maybe enable shared memory just be to be safe... nahh.*/ | |
594 | if (base) { /* Use the shared memory. */ | |
595 | ring_offset -= (EL2_MB1_START_PG<<8); | |
596 | if (ring_offset + count > EL2_MEMSIZE) { | |
597 | /* We must wrap the input move. */ | |
598 | int semi_count = EL2_MEMSIZE - ring_offset; | |
599 | memcpy_fromio(skb->data, base + ring_offset, semi_count); | |
600 | count -= semi_count; | |
601 | memcpy_fromio(skb->data + semi_count, base + ei_status.priv, count); | |
602 | } else { | |
603 | /* Packet is in one chunk -- we can copy + cksum. */ | |
604 | eth_io_copy_and_sum(skb, base + ring_offset, count, 0); | |
605 | } | |
606 | return; | |
607 | } | |
608 | ||
609 | /* | |
610 | * No shared memory, use programmed I/O. | |
611 | */ | |
612 | word = (unsigned short) ring_offset; | |
613 | outb(word>>8, E33G_DMAAH); | |
614 | outb(word&0xFF, E33G_DMAAL); | |
615 | ||
616 | outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT | |
617 | | ECNTRL_START, E33G_CNTRL); | |
618 | ||
619 | /* | |
620 | * Here I also try to get data as fast as possible. I am betting that I | |
621 | * can read one extra byte without clobbering anything in the kernel because | |
622 | * this would only occur on an odd byte-count and allocation of skb->data | |
623 | * is word-aligned. Variable 'count' is NOT checked. Caller must check | |
624 | * for a valid count. | |
625 | * [This is currently quite safe.... but if one day the 3c503 explodes | |
626 | * you know where to come looking ;)] | |
627 | */ | |
628 | ||
629 | buf = (unsigned short int *) skb->data; | |
630 | count = (count + 1) >> 1; | |
631 | for(;;) | |
632 | { | |
633 | boguscount = 0x1000; | |
634 | while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) | |
635 | { | |
636 | if(!boguscount--) | |
637 | { | |
638 | printk("%s: FIFO blocked in el2_block_input.\n", dev->name); | |
639 | el2_reset_8390(dev); | |
640 | goto blocked; | |
641 | } | |
642 | } | |
643 | if(count > WRD_COUNT) | |
644 | { | |
645 | insw(E33G_FIFOH, buf, WRD_COUNT); | |
646 | buf += WRD_COUNT; | |
647 | count -= WRD_COUNT; | |
648 | } | |
649 | else | |
650 | { | |
651 | insw(E33G_FIFOH, buf, count); | |
652 | break; | |
653 | } | |
654 | } | |
655 | blocked:; | |
656 | outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); | |
657 | return; | |
658 | } | |
659 | ||
660 | ||
661 | static void netdev_get_drvinfo(struct net_device *dev, | |
662 | struct ethtool_drvinfo *info) | |
663 | { | |
664 | strcpy(info->driver, DRV_NAME); | |
665 | strcpy(info->version, DRV_VERSION); | |
666 | sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); | |
667 | } | |
668 | ||
669 | static struct ethtool_ops netdev_ethtool_ops = { | |
670 | .get_drvinfo = netdev_get_drvinfo, | |
671 | }; | |
672 | ||
673 | #ifdef MODULE | |
674 | #define MAX_EL2_CARDS 4 /* Max number of EL2 cards per module */ | |
675 | ||
676 | static struct net_device *dev_el2[MAX_EL2_CARDS]; | |
677 | static int io[MAX_EL2_CARDS]; | |
678 | static int irq[MAX_EL2_CARDS]; | |
679 | static int xcvr[MAX_EL2_CARDS]; /* choose int. or ext. xcvr */ | |
680 | module_param_array(io, int, NULL, 0); | |
681 | module_param_array(irq, int, NULL, 0); | |
682 | module_param_array(xcvr, int, NULL, 0); | |
683 | MODULE_PARM_DESC(io, "I/O base address(es)"); | |
684 | MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); | |
685 | MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)"); | |
686 | MODULE_DESCRIPTION("3Com ISA EtherLink II, II/16 (3c503, 3c503/16) driver"); | |
687 | MODULE_LICENSE("GPL"); | |
688 | ||
689 | /* This is set up so that only a single autoprobe takes place per call. | |
690 | ISA device autoprobes on a running machine are not recommended. */ | |
96e672c7 | 691 | int __init |
1da177e4 LT |
692 | init_module(void) |
693 | { | |
694 | struct net_device *dev; | |
695 | int this_dev, found = 0; | |
696 | ||
697 | for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) { | |
698 | if (io[this_dev] == 0) { | |
699 | if (this_dev != 0) break; /* only autoprobe 1st one */ | |
700 | printk(KERN_NOTICE "3c503.c: Presently autoprobing (not recommended) for a single card.\n"); | |
701 | } | |
702 | dev = alloc_ei_netdev(); | |
703 | if (!dev) | |
704 | break; | |
705 | dev->irq = irq[this_dev]; | |
706 | dev->base_addr = io[this_dev]; | |
707 | dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */ | |
708 | if (do_el2_probe(dev) == 0) { | |
b1fc5505 HX |
709 | dev_el2[found++] = dev; |
710 | continue; | |
1da177e4 LT |
711 | } |
712 | free_netdev(dev); | |
713 | printk(KERN_WARNING "3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]); | |
714 | break; | |
715 | } | |
716 | if (found) | |
717 | return 0; | |
718 | return -ENXIO; | |
719 | } | |
720 | ||
64916f1e DV |
721 | static void cleanup_card(struct net_device *dev) |
722 | { | |
723 | /* NB: el2_close() handles free_irq */ | |
724 | release_region(dev->base_addr, EL2_IO_EXTENT); | |
725 | if (ei_status.mem) | |
726 | iounmap(ei_status.mem); | |
727 | } | |
728 | ||
1da177e4 LT |
729 | void |
730 | cleanup_module(void) | |
731 | { | |
732 | int this_dev; | |
733 | ||
734 | for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) { | |
735 | struct net_device *dev = dev_el2[this_dev]; | |
736 | if (dev) { | |
737 | unregister_netdev(dev); | |
738 | cleanup_card(dev); | |
739 | free_netdev(dev); | |
740 | } | |
741 | } | |
742 | } | |
743 | #endif /* MODULE */ |