]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* EtherLinkXL.c: A 3Com EtherLink PCI III/XL ethernet driver for linux. */ |
2 | /* | |
3 | Written 1996-1999 by Donald Becker. | |
4 | ||
5 | This software may be used and distributed according to the terms | |
6 | of the GNU General Public License, incorporated herein by reference. | |
7 | ||
8 | This driver is for the 3Com "Vortex" and "Boomerang" series ethercards. | |
9 | Members of the series include Fast EtherLink 3c590/3c592/3c595/3c597 | |
10 | and the EtherLink XL 3c900 and 3c905 cards. | |
11 | ||
12 | Problem reports and questions should be directed to | |
13 | vortex@scyld.com | |
14 | ||
15 | The author may be reached as becker@scyld.com, or C/O | |
16 | Scyld Computing Corporation | |
17 | 410 Severn Ave., Suite 210 | |
18 | Annapolis MD 21403 | |
19 | ||
1da177e4 LT |
20 | */ |
21 | ||
22 | /* | |
23 | * FIXME: This driver _could_ support MTU changing, but doesn't. See Don's hamachi.c implementation | |
24 | * as well as other drivers | |
25 | * | |
26 | * NOTE: If you make 'vortex_debug' a constant (#define vortex_debug 0) the driver shrinks by 2k | |
27 | * due to dead code elimination. There will be some performance benefits from this due to | |
28 | * elimination of all the tests and reduced cache footprint. | |
29 | */ | |
30 | ||
31 | ||
32 | #define DRV_NAME "3c59x" | |
1da177e4 LT |
33 | |
34 | ||
35 | ||
36 | /* A few values that may be tweaked. */ | |
37 | /* Keep the ring sizes a power of two for efficiency. */ | |
38 | #define TX_RING_SIZE 16 | |
39 | #define RX_RING_SIZE 32 | |
40 | #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ | |
41 | ||
42 | /* "Knobs" that adjust features and parameters. */ | |
43 | /* Set the copy breakpoint for the copy-only-tiny-frames scheme. | |
44 | Setting to > 1512 effectively disables this feature. */ | |
45 | #ifndef __arm__ | |
46 | static int rx_copybreak = 200; | |
47 | #else | |
48 | /* ARM systems perform better by disregarding the bus-master | |
49 | transfer capability of these cards. -- rmk */ | |
50 | static int rx_copybreak = 1513; | |
51 | #endif | |
52 | /* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */ | |
53 | static const int mtu = 1500; | |
54 | /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ | |
55 | static int max_interrupt_work = 32; | |
56 | /* Tx timeout interval (millisecs) */ | |
57 | static int watchdog = 5000; | |
58 | ||
59 | /* Allow aggregation of Tx interrupts. Saves CPU load at the cost | |
60 | * of possible Tx stalls if the system is blocking interrupts | |
61 | * somewhere else. Undefine this to disable. | |
62 | */ | |
63 | #define tx_interrupt_mitigation 1 | |
64 | ||
65 | /* Put out somewhat more debugging messages. (0: no msg, 1 minimal .. 6). */ | |
66 | #define vortex_debug debug | |
67 | #ifdef VORTEX_DEBUG | |
68 | static int vortex_debug = VORTEX_DEBUG; | |
69 | #else | |
70 | static int vortex_debug = 1; | |
71 | #endif | |
72 | ||
1da177e4 LT |
73 | #include <linux/module.h> |
74 | #include <linux/kernel.h> | |
75 | #include <linux/string.h> | |
76 | #include <linux/timer.h> | |
77 | #include <linux/errno.h> | |
78 | #include <linux/in.h> | |
79 | #include <linux/ioport.h> | |
80 | #include <linux/slab.h> | |
81 | #include <linux/interrupt.h> | |
82 | #include <linux/pci.h> | |
83 | #include <linux/mii.h> | |
84 | #include <linux/init.h> | |
85 | #include <linux/netdevice.h> | |
86 | #include <linux/etherdevice.h> | |
87 | #include <linux/skbuff.h> | |
88 | #include <linux/ethtool.h> | |
89 | #include <linux/highmem.h> | |
90 | #include <linux/eisa.h> | |
91 | #include <linux/bitops.h> | |
ff5688ae | 92 | #include <linux/jiffies.h> |
60e4ad7a | 93 | #include <asm/irq.h> /* For nr_irqs only. */ |
1da177e4 LT |
94 | #include <asm/io.h> |
95 | #include <asm/uaccess.h> | |
96 | ||
97 | /* Kernel compatibility defines, some common to David Hinds' PCMCIA package. | |
98 | This is only in the support-all-kernels source code. */ | |
99 | ||
100 | #define RUN_AT(x) (jiffies + (x)) | |
101 | ||
102 | #include <linux/delay.h> | |
103 | ||
104 | ||
86de79b6 SH |
105 | static const char version[] __devinitconst = |
106 | DRV_NAME ": Donald Becker and others.\n"; | |
1da177e4 LT |
107 | |
108 | MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); | |
61238602 | 109 | MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver "); |
1da177e4 | 110 | MODULE_LICENSE("GPL"); |
1da177e4 LT |
111 | |
112 | ||
113 | /* Operational parameter that usually are not changed. */ | |
114 | ||
115 | /* The Vortex size is twice that of the original EtherLinkIII series: the | |
116 | runtime register window, window 1, is now always mapped in. | |
117 | The Boomerang size is twice as large as the Vortex -- it has additional | |
118 | bus master control registers. */ | |
119 | #define VORTEX_TOTAL_SIZE 0x20 | |
120 | #define BOOMERANG_TOTAL_SIZE 0x40 | |
121 | ||
122 | /* Set iff a MII transceiver on any interface requires mdio preamble. | |
123 | This only set with the original DP83840 on older 3c905 boards, so the extra | |
124 | code size of a per-interface flag is not worthwhile. */ | |
125 | static char mii_preamble_required; | |
126 | ||
127 | #define PFX DRV_NAME ": " | |
128 | ||
129 | ||
130 | ||
131 | /* | |
132 | Theory of Operation | |
133 | ||
134 | I. Board Compatibility | |
135 | ||
136 | This device driver is designed for the 3Com FastEtherLink and FastEtherLink | |
137 | XL, 3Com's PCI to 10/100baseT adapters. It also works with the 10Mbs | |
138 | versions of the FastEtherLink cards. The supported product IDs are | |
139 | 3c590, 3c592, 3c595, 3c597, 3c900, 3c905 | |
140 | ||
141 | The related ISA 3c515 is supported with a separate driver, 3c515.c, included | |
142 | with the kernel source or available from | |
143 | cesdis.gsfc.nasa.gov:/pub/linux/drivers/3c515.html | |
144 | ||
145 | II. Board-specific settings | |
146 | ||
147 | PCI bus devices are configured by the system at boot time, so no jumpers | |
148 | need to be set on the board. The system BIOS should be set to assign the | |
149 | PCI INTA signal to an otherwise unused system IRQ line. | |
150 | ||
151 | The EEPROM settings for media type and forced-full-duplex are observed. | |
152 | The EEPROM media type should be left at the default "autoselect" unless using | |
153 | 10base2 or AUI connections which cannot be reliably detected. | |
154 | ||
155 | III. Driver operation | |
156 | ||
157 | The 3c59x series use an interface that's very similar to the previous 3c5x9 | |
158 | series. The primary interface is two programmed-I/O FIFOs, with an | |
159 | alternate single-contiguous-region bus-master transfer (see next). | |
160 | ||
161 | The 3c900 "Boomerang" series uses a full-bus-master interface with separate | |
162 | lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet, | |
163 | DEC Tulip and Intel Speedo3. The first chip version retains a compatible | |
164 | programmed-I/O interface that has been removed in 'B' and subsequent board | |
165 | revisions. | |
166 | ||
167 | One extension that is advertised in a very large font is that the adapters | |
168 | are capable of being bus masters. On the Vortex chip this capability was | |
169 | only for a single contiguous region making it far less useful than the full | |
170 | bus master capability. There is a significant performance impact of taking | |
171 | an extra interrupt or polling for the completion of each transfer, as well | |
172 | as difficulty sharing the single transfer engine between the transmit and | |
173 | receive threads. Using DMA transfers is a win only with large blocks or | |
174 | with the flawed versions of the Intel Orion motherboard PCI controller. | |
175 | ||
176 | The Boomerang chip's full-bus-master interface is useful, and has the | |
177 | currently-unused advantages over other similar chips that queued transmit | |
178 | packets may be reordered and receive buffer groups are associated with a | |
179 | single frame. | |
180 | ||
181 | With full-bus-master support, this driver uses a "RX_COPYBREAK" scheme. | |
182 | Rather than a fixed intermediate receive buffer, this scheme allocates | |
183 | full-sized skbuffs as receive buffers. The value RX_COPYBREAK is used as | |
184 | the copying breakpoint: it is chosen to trade-off the memory wasted by | |
185 | passing the full-sized skbuff to the queue layer for all frames vs. the | |
186 | copying cost of copying a frame to a correctly-sized skbuff. | |
187 | ||
188 | IIIC. Synchronization | |
189 | The driver runs as two independent, single-threaded flows of control. One | |
190 | is the send-packet routine, which enforces single-threaded use by the | |
191 | dev->tbusy flag. The other thread is the interrupt handler, which is single | |
192 | threaded by the hardware and other software. | |
193 | ||
194 | IV. Notes | |
195 | ||
196 | Thanks to Cameron Spitzer and Terry Murphy of 3Com for providing development | |
197 | 3c590, 3c595, and 3c900 boards. | |
198 | The name "Vortex" is the internal 3Com project name for the PCI ASIC, and | |
199 | the EISA version is called "Demon". According to Terry these names come | |
200 | from rides at the local amusement park. | |
201 | ||
202 | The new chips support both ethernet (1.5K) and FDDI (4.5K) packet sizes! | |
203 | This driver only supports ethernet packets because of the skbuff allocation | |
204 | limit of 4K. | |
205 | */ | |
206 | ||
207 | /* This table drives the PCI probe routines. It's mostly boilerplate in all | |
208 | of the drivers, and will likely be provided by some future kernel. | |
209 | */ | |
210 | enum pci_flags_bit { | |
1f1bd5fc | 211 | PCI_USES_MASTER=4, |
1da177e4 LT |
212 | }; |
213 | ||
214 | enum { IS_VORTEX=1, IS_BOOMERANG=2, IS_CYCLONE=4, IS_TORNADO=8, | |
215 | EEPROM_8BIT=0x10, /* AKPM: Uses 0x230 as the base bitmaps for EEPROM reads */ | |
216 | HAS_PWR_CTRL=0x20, HAS_MII=0x40, HAS_NWAY=0x80, HAS_CB_FNS=0x100, | |
217 | INVERT_MII_PWR=0x200, INVERT_LED_PWR=0x400, MAX_COLLISION_RESET=0x800, | |
218 | EEPROM_OFFSET=0x1000, HAS_HWCKSM=0x2000, WNO_XCVR_PWR=0x4000, | |
219 | EXTRA_PREAMBLE=0x8000, EEPROM_RESET=0x10000, }; | |
220 | ||
221 | enum vortex_chips { | |
222 | CH_3C590 = 0, | |
223 | CH_3C592, | |
224 | CH_3C597, | |
225 | CH_3C595_1, | |
226 | CH_3C595_2, | |
227 | ||
228 | CH_3C595_3, | |
229 | CH_3C900_1, | |
230 | CH_3C900_2, | |
231 | CH_3C900_3, | |
232 | CH_3C900_4, | |
233 | ||
234 | CH_3C900_5, | |
235 | CH_3C900B_FL, | |
236 | CH_3C905_1, | |
237 | CH_3C905_2, | |
b4adbb4d | 238 | CH_3C905B_TX, |
1da177e4 LT |
239 | CH_3C905B_1, |
240 | ||
241 | CH_3C905B_2, | |
242 | CH_3C905B_FX, | |
243 | CH_3C905C, | |
244 | CH_3C9202, | |
245 | CH_3C980, | |
246 | CH_3C9805, | |
247 | ||
248 | CH_3CSOHO100_TX, | |
249 | CH_3C555, | |
250 | CH_3C556, | |
251 | CH_3C556B, | |
252 | CH_3C575, | |
253 | ||
254 | CH_3C575_1, | |
255 | CH_3CCFE575, | |
256 | CH_3CCFE575CT, | |
257 | CH_3CCFE656, | |
258 | CH_3CCFEM656, | |
259 | ||
260 | CH_3CCFEM656_1, | |
261 | CH_3C450, | |
262 | CH_3C920, | |
263 | CH_3C982A, | |
264 | CH_3C982B, | |
265 | ||
266 | CH_905BT4, | |
267 | CH_920B_EMB_WNM, | |
268 | }; | |
269 | ||
270 | ||
271 | /* note: this array directly indexed by above enums, and MUST | |
272 | * be kept in sync with both the enums above, and the PCI device | |
273 | * table below | |
274 | */ | |
275 | static struct vortex_chip_info { | |
276 | const char *name; | |
277 | int flags; | |
278 | int drv_flags; | |
279 | int io_size; | |
280 | } vortex_info_tbl[] __devinitdata = { | |
281 | {"3c590 Vortex 10Mbps", | |
1f1bd5fc | 282 | PCI_USES_MASTER, IS_VORTEX, 32, }, |
1da177e4 | 283 | {"3c592 EISA 10Mbps Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */ |
1f1bd5fc | 284 | PCI_USES_MASTER, IS_VORTEX, 32, }, |
1da177e4 | 285 | {"3c597 EISA Fast Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */ |
1f1bd5fc | 286 | PCI_USES_MASTER, IS_VORTEX, 32, }, |
1da177e4 | 287 | {"3c595 Vortex 100baseTx", |
1f1bd5fc | 288 | PCI_USES_MASTER, IS_VORTEX, 32, }, |
1da177e4 | 289 | {"3c595 Vortex 100baseT4", |
1f1bd5fc | 290 | PCI_USES_MASTER, IS_VORTEX, 32, }, |
1da177e4 LT |
291 | |
292 | {"3c595 Vortex 100base-MII", | |
1f1bd5fc | 293 | PCI_USES_MASTER, IS_VORTEX, 32, }, |
1da177e4 | 294 | {"3c900 Boomerang 10baseT", |
1f1bd5fc | 295 | PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, |
1da177e4 | 296 | {"3c900 Boomerang 10Mbps Combo", |
1f1bd5fc | 297 | PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, |
1da177e4 | 298 | {"3c900 Cyclone 10Mbps TPO", /* AKPM: from Don's 0.99M */ |
1f1bd5fc | 299 | PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, |
1da177e4 | 300 | {"3c900 Cyclone 10Mbps Combo", |
1f1bd5fc | 301 | PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, |
1da177e4 LT |
302 | |
303 | {"3c900 Cyclone 10Mbps TPC", /* AKPM: from Don's 0.99M */ | |
1f1bd5fc | 304 | PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, |
1da177e4 | 305 | {"3c900B-FL Cyclone 10base-FL", |
1f1bd5fc | 306 | PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, |
1da177e4 | 307 | {"3c905 Boomerang 100baseTx", |
1f1bd5fc | 308 | PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, |
1da177e4 | 309 | {"3c905 Boomerang 100baseT4", |
1f1bd5fc | 310 | PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, |
b4adbb4d PT |
311 | {"3C905B-TX Fast Etherlink XL PCI", |
312 | PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, | |
1da177e4 | 313 | {"3c905B Cyclone 100baseTx", |
1f1bd5fc | 314 | PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, |
1da177e4 LT |
315 | |
316 | {"3c905B Cyclone 10/100/BNC", | |
1f1bd5fc | 317 | PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, |
1da177e4 | 318 | {"3c905B-FX Cyclone 100baseFx", |
1f1bd5fc | 319 | PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, |
1da177e4 | 320 | {"3c905C Tornado", |
1f1bd5fc | 321 | PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, |
1da177e4 | 322 | {"3c920B-EMB-WNM (ATI Radeon 9100 IGP)", |
1f1bd5fc | 323 | PCI_USES_MASTER, IS_TORNADO|HAS_MII|HAS_HWCKSM, 128, }, |
1da177e4 | 324 | {"3c980 Cyclone", |
aa807f79 | 325 | PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, |
1da177e4 LT |
326 | |
327 | {"3c980C Python-T", | |
1f1bd5fc | 328 | PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, |
1da177e4 | 329 | {"3cSOHO100-TX Hurricane", |
b8a1fcee | 330 | PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, |
1da177e4 | 331 | {"3c555 Laptop Hurricane", |
1f1bd5fc | 332 | PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, }, |
1da177e4 | 333 | {"3c556 Laptop Tornado", |
1f1bd5fc | 334 | PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_8BIT|HAS_CB_FNS|INVERT_MII_PWR| |
1da177e4 LT |
335 | HAS_HWCKSM, 128, }, |
336 | {"3c556B Laptop Hurricane", | |
1f1bd5fc | 337 | PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_OFFSET|HAS_CB_FNS|INVERT_MII_PWR| |
1da177e4 LT |
338 | WNO_XCVR_PWR|HAS_HWCKSM, 128, }, |
339 | ||
340 | {"3c575 [Megahertz] 10/100 LAN CardBus", | |
1f1bd5fc | 341 | PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, |
1da177e4 | 342 | {"3c575 Boomerang CardBus", |
1f1bd5fc | 343 | PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, |
1da177e4 | 344 | {"3CCFE575BT Cyclone CardBus", |
1f1bd5fc | 345 | PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT| |
1da177e4 LT |
346 | INVERT_LED_PWR|HAS_HWCKSM, 128, }, |
347 | {"3CCFE575CT Tornado CardBus", | |
1f1bd5fc | 348 | PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| |
1da177e4 LT |
349 | MAX_COLLISION_RESET|HAS_HWCKSM, 128, }, |
350 | {"3CCFE656 Cyclone CardBus", | |
1f1bd5fc | 351 | PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| |
1da177e4 LT |
352 | INVERT_LED_PWR|HAS_HWCKSM, 128, }, |
353 | ||
354 | {"3CCFEM656B Cyclone+Winmodem CardBus", | |
1f1bd5fc | 355 | PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| |
1da177e4 LT |
356 | INVERT_LED_PWR|HAS_HWCKSM, 128, }, |
357 | {"3CXFEM656C Tornado+Winmodem CardBus", /* From pcmcia-cs-3.1.5 */ | |
1f1bd5fc | 358 | PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| |
1da177e4 LT |
359 | MAX_COLLISION_RESET|HAS_HWCKSM, 128, }, |
360 | {"3c450 HomePNA Tornado", /* AKPM: from Don's 0.99Q */ | |
1f1bd5fc | 361 | PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, |
1da177e4 | 362 | {"3c920 Tornado", |
1f1bd5fc | 363 | PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, |
1da177e4 | 364 | {"3c982 Hydra Dual Port A", |
1f1bd5fc | 365 | PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, |
1da177e4 LT |
366 | |
367 | {"3c982 Hydra Dual Port B", | |
1f1bd5fc | 368 | PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, |
1da177e4 | 369 | {"3c905B-T4", |
1f1bd5fc | 370 | PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, |
1da177e4 | 371 | {"3c920B-EMB-WNM Tornado", |
1f1bd5fc | 372 | PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, |
1da177e4 LT |
373 | |
374 | {NULL,}, /* NULL terminated list. */ | |
375 | }; | |
376 | ||
377 | ||
a3aa1884 | 378 | static DEFINE_PCI_DEVICE_TABLE(vortex_pci_tbl) = { |
1da177e4 LT |
379 | { 0x10B7, 0x5900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C590 }, |
380 | { 0x10B7, 0x5920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C592 }, | |
381 | { 0x10B7, 0x5970, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C597 }, | |
382 | { 0x10B7, 0x5950, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_1 }, | |
383 | { 0x10B7, 0x5951, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_2 }, | |
384 | ||
385 | { 0x10B7, 0x5952, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_3 }, | |
386 | { 0x10B7, 0x9000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_1 }, | |
387 | { 0x10B7, 0x9001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_2 }, | |
388 | { 0x10B7, 0x9004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_3 }, | |
389 | { 0x10B7, 0x9005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_4 }, | |
390 | ||
391 | { 0x10B7, 0x9006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_5 }, | |
392 | { 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL }, | |
393 | { 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 }, | |
394 | { 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 }, | |
b4adbb4d | 395 | { 0x10B7, 0x9054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_TX }, |
1da177e4 LT |
396 | { 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 }, |
397 | ||
398 | { 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 }, | |
399 | { 0x10B7, 0x905A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_FX }, | |
400 | { 0x10B7, 0x9200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905C }, | |
401 | { 0x10B7, 0x9202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9202 }, | |
402 | { 0x10B7, 0x9800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C980 }, | |
403 | { 0x10B7, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9805 }, | |
404 | ||
405 | { 0x10B7, 0x7646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CSOHO100_TX }, | |
406 | { 0x10B7, 0x5055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C555 }, | |
407 | { 0x10B7, 0x6055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556 }, | |
408 | { 0x10B7, 0x6056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556B }, | |
409 | { 0x10B7, 0x5b57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575 }, | |
410 | ||
411 | { 0x10B7, 0x5057, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575_1 }, | |
412 | { 0x10B7, 0x5157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575 }, | |
413 | { 0x10B7, 0x5257, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575CT }, | |
414 | { 0x10B7, 0x6560, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE656 }, | |
415 | { 0x10B7, 0x6562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656 }, | |
416 | ||
417 | { 0x10B7, 0x6564, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656_1 }, | |
418 | { 0x10B7, 0x4500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C450 }, | |
419 | { 0x10B7, 0x9201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C920 }, | |
420 | { 0x10B7, 0x1201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982A }, | |
421 | { 0x10B7, 0x1202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982B }, | |
422 | ||
423 | { 0x10B7, 0x9056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_905BT4 }, | |
424 | { 0x10B7, 0x9210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_920B_EMB_WNM }, | |
425 | ||
426 | {0,} /* 0 terminated list. */ | |
427 | }; | |
428 | MODULE_DEVICE_TABLE(pci, vortex_pci_tbl); | |
429 | ||
430 | ||
431 | /* Operational definitions. | |
432 | These are not used by other compilation units and thus are not | |
433 | exported in a ".h" file. | |
434 | ||
435 | First the windows. There are eight register windows, with the command | |
436 | and status registers available in each. | |
437 | */ | |
62afe595 | 438 | #define EL3WINDOW(win_num) iowrite16(SelectWindow + (win_num), ioaddr + EL3_CMD) |
1da177e4 LT |
439 | #define EL3_CMD 0x0e |
440 | #define EL3_STATUS 0x0e | |
441 | ||
442 | /* The top five bits written to EL3_CMD are a command, the lower | |
443 | 11 bits are the parameter, if applicable. | |
444 | Note that 11 parameters bits was fine for ethernet, but the new chip | |
445 | can handle FDDI length frames (~4500 octets) and now parameters count | |
446 | 32-bit 'Dwords' rather than octets. */ | |
447 | ||
448 | enum vortex_cmd { | |
449 | TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11, | |
450 | RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, | |
451 | UpStall = 6<<11, UpUnstall = (6<<11)+1, | |
452 | DownStall = (6<<11)+2, DownUnstall = (6<<11)+3, | |
453 | RxDiscard = 8<<11, TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11, | |
454 | FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11, | |
455 | SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11, | |
456 | SetTxThreshold = 18<<11, SetTxStart = 19<<11, | |
457 | StartDMAUp = 20<<11, StartDMADown = (20<<11)+1, StatsEnable = 21<<11, | |
458 | StatsDisable = 22<<11, StopCoax = 23<<11, SetFilterBit = 25<<11,}; | |
459 | ||
460 | /* The SetRxFilter command accepts the following classes: */ | |
461 | enum RxFilter { | |
462 | RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 }; | |
463 | ||
464 | /* Bits in the general status register. */ | |
465 | enum vortex_status { | |
466 | IntLatch = 0x0001, HostError = 0x0002, TxComplete = 0x0004, | |
467 | TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, | |
468 | IntReq = 0x0040, StatsFull = 0x0080, | |
469 | DMADone = 1<<8, DownComplete = 1<<9, UpComplete = 1<<10, | |
470 | DMAInProgress = 1<<11, /* DMA controller is still busy.*/ | |
471 | CmdInProgress = 1<<12, /* EL3_CMD is still busy.*/ | |
472 | }; | |
473 | ||
474 | /* Register window 1 offsets, the window used in normal operation. | |
475 | On the Vortex this window is always mapped at offsets 0x10-0x1f. */ | |
476 | enum Window1 { | |
477 | TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14, | |
478 | RxStatus = 0x18, Timer=0x1A, TxStatus = 0x1B, | |
479 | TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */ | |
480 | }; | |
481 | enum Window0 { | |
482 | Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */ | |
483 | Wn0EepromData = 12, /* Window 0: EEPROM results register. */ | |
484 | IntrStatus=0x0E, /* Valid in all windows. */ | |
485 | }; | |
486 | enum Win0_EEPROM_bits { | |
487 | EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0, | |
488 | EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */ | |
489 | EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */ | |
490 | }; | |
491 | /* EEPROM locations. */ | |
492 | enum eeprom_offset { | |
493 | PhysAddr01=0, PhysAddr23=1, PhysAddr45=2, ModelID=3, | |
494 | EtherLink3ID=7, IFXcvrIO=8, IRQLine=9, | |
495 | NodeAddr01=10, NodeAddr23=11, NodeAddr45=12, | |
496 | DriverTune=13, Checksum=15}; | |
497 | ||
498 | enum Window2 { /* Window 2. */ | |
499 | Wn2_ResetOptions=12, | |
500 | }; | |
501 | enum Window3 { /* Window 3: MAC/config bits. */ | |
502 | Wn3_Config=0, Wn3_MaxPktSize=4, Wn3_MAC_Ctrl=6, Wn3_Options=8, | |
503 | }; | |
504 | ||
505 | #define BFEXT(value, offset, bitcount) \ | |
506 | ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1)) | |
507 | ||
508 | #define BFINS(lhs, rhs, offset, bitcount) \ | |
509 | (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \ | |
510 | (((rhs) & ((1 << (bitcount)) - 1)) << (offset))) | |
511 | ||
512 | #define RAM_SIZE(v) BFEXT(v, 0, 3) | |
513 | #define RAM_WIDTH(v) BFEXT(v, 3, 1) | |
514 | #define RAM_SPEED(v) BFEXT(v, 4, 2) | |
515 | #define ROM_SIZE(v) BFEXT(v, 6, 2) | |
516 | #define RAM_SPLIT(v) BFEXT(v, 16, 2) | |
517 | #define XCVR(v) BFEXT(v, 20, 4) | |
518 | #define AUTOSELECT(v) BFEXT(v, 24, 1) | |
519 | ||
520 | enum Window4 { /* Window 4: Xcvr/media bits. */ | |
521 | Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10, | |
522 | }; | |
523 | enum Win4_Media_bits { | |
524 | Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */ | |
525 | Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */ | |
526 | Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */ | |
527 | Media_LnkBeat = 0x0800, | |
528 | }; | |
529 | enum Window7 { /* Window 7: Bus Master control. */ | |
530 | Wn7_MasterAddr = 0, Wn7_VlanEtherType=4, Wn7_MasterLen = 6, | |
531 | Wn7_MasterStatus = 12, | |
532 | }; | |
533 | /* Boomerang bus master control registers. */ | |
534 | enum MasterCtrl { | |
535 | PktStatus = 0x20, DownListPtr = 0x24, FragAddr = 0x28, FragLen = 0x2c, | |
536 | TxFreeThreshold = 0x2f, UpPktStatus = 0x30, UpListPtr = 0x38, | |
537 | }; | |
538 | ||
539 | /* The Rx and Tx descriptor lists. | |
540 | Caution Alpha hackers: these types are 32 bits! Note also the 8 byte | |
541 | alignment contraint on tx_ring[] and rx_ring[]. */ | |
542 | #define LAST_FRAG 0x80000000 /* Last Addr/Len pair in descriptor. */ | |
543 | #define DN_COMPLETE 0x00010000 /* This packet has been downloaded */ | |
544 | struct boom_rx_desc { | |
cc2d6596 AV |
545 | __le32 next; /* Last entry points to 0. */ |
546 | __le32 status; | |
547 | __le32 addr; /* Up to 63 addr/len pairs possible. */ | |
548 | __le32 length; /* Set LAST_FRAG to indicate last pair. */ | |
1da177e4 LT |
549 | }; |
550 | /* Values for the Rx status entry. */ | |
551 | enum rx_desc_status { | |
552 | RxDComplete=0x00008000, RxDError=0x4000, | |
553 | /* See boomerang_rx() for actual error bits */ | |
554 | IPChksumErr=1<<25, TCPChksumErr=1<<26, UDPChksumErr=1<<27, | |
555 | IPChksumValid=1<<29, TCPChksumValid=1<<30, UDPChksumValid=1<<31, | |
556 | }; | |
557 | ||
558 | #ifdef MAX_SKB_FRAGS | |
559 | #define DO_ZEROCOPY 1 | |
560 | #else | |
561 | #define DO_ZEROCOPY 0 | |
562 | #endif | |
563 | ||
564 | struct boom_tx_desc { | |
cc2d6596 AV |
565 | __le32 next; /* Last entry points to 0. */ |
566 | __le32 status; /* bits 0:12 length, others see below. */ | |
1da177e4 LT |
567 | #if DO_ZEROCOPY |
568 | struct { | |
cc2d6596 AV |
569 | __le32 addr; |
570 | __le32 length; | |
1da177e4 LT |
571 | } frag[1+MAX_SKB_FRAGS]; |
572 | #else | |
cc2d6596 AV |
573 | __le32 addr; |
574 | __le32 length; | |
1da177e4 LT |
575 | #endif |
576 | }; | |
577 | ||
578 | /* Values for the Tx status entry. */ | |
579 | enum tx_desc_status { | |
580 | CRCDisable=0x2000, TxDComplete=0x8000, | |
581 | AddIPChksum=0x02000000, AddTCPChksum=0x04000000, AddUDPChksum=0x08000000, | |
582 | TxIntrUploaded=0x80000000, /* IRQ when in FIFO, but maybe not sent. */ | |
583 | }; | |
584 | ||
585 | /* Chip features we care about in vp->capabilities, read from the EEPROM. */ | |
586 | enum ChipCaps { CapBusMaster=0x20, CapPwrMgmt=0x2000 }; | |
587 | ||
588 | struct vortex_extra_stats { | |
8d1d0340 SK |
589 | unsigned long tx_deferred; |
590 | unsigned long tx_max_collisions; | |
591 | unsigned long tx_multiple_collisions; | |
592 | unsigned long tx_single_collisions; | |
593 | unsigned long rx_bad_ssd; | |
1da177e4 LT |
594 | }; |
595 | ||
596 | struct vortex_private { | |
597 | /* The Rx and Tx rings should be quad-word-aligned. */ | |
598 | struct boom_rx_desc* rx_ring; | |
599 | struct boom_tx_desc* tx_ring; | |
600 | dma_addr_t rx_ring_dma; | |
601 | dma_addr_t tx_ring_dma; | |
602 | /* The addresses of transmit- and receive-in-place skbuffs. */ | |
603 | struct sk_buff* rx_skbuff[RX_RING_SIZE]; | |
604 | struct sk_buff* tx_skbuff[TX_RING_SIZE]; | |
605 | unsigned int cur_rx, cur_tx; /* The next free ring entry */ | |
606 | unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ | |
1da177e4 LT |
607 | struct vortex_extra_stats xstats; /* NIC-specific extra stats */ |
608 | struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */ | |
609 | dma_addr_t tx_skb_dma; /* Allocated DMA address for bus master ctrl DMA. */ | |
610 | ||
611 | /* PCI configuration space information. */ | |
612 | struct device *gendev; | |
62afe595 JL |
613 | void __iomem *ioaddr; /* IO address space */ |
614 | void __iomem *cb_fn_base; /* CardBus function status addr space. */ | |
1da177e4 LT |
615 | |
616 | /* Some values here only for performance evaluation and path-coverage */ | |
617 | int rx_nocopy, rx_copy, queued_packet, rx_csumhits; | |
618 | int card_idx; | |
619 | ||
620 | /* The remainder are related to chip state, mostly media selection. */ | |
621 | struct timer_list timer; /* Media selection timer. */ | |
622 | struct timer_list rx_oom_timer; /* Rx skb allocation retry timer */ | |
623 | int options; /* User-settable misc. driver options. */ | |
624 | unsigned int media_override:4, /* Passed-in media type. */ | |
625 | default_media:4, /* Read from the EEPROM/Wn3_Config. */ | |
09ce3512 | 626 | full_duplex:1, autoselect:1, |
1da177e4 LT |
627 | bus_master:1, /* Vortex can only do a fragment bus-m. */ |
628 | full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang */ | |
629 | flow_ctrl:1, /* Use 802.3x flow control (PAUSE only) */ | |
630 | partner_flow_ctrl:1, /* Partner supports flow control */ | |
631 | has_nway:1, | |
632 | enable_wol:1, /* Wake-on-LAN is enabled */ | |
633 | pm_state_valid:1, /* pci_dev->saved_config_space has sane contents */ | |
634 | open:1, | |
635 | medialock:1, | |
636 | must_free_region:1, /* Flag: if zero, Cardbus owns the I/O region */ | |
637 | large_frames:1; /* accept large frames */ | |
638 | int drv_flags; | |
639 | u16 status_enable; | |
640 | u16 intr_enable; | |
641 | u16 available_media; /* From Wn3_Options. */ | |
642 | u16 capabilities, info1, info2; /* Various, from EEPROM. */ | |
643 | u16 advertising; /* NWay media advertisement */ | |
644 | unsigned char phys[2]; /* MII device addresses. */ | |
645 | u16 deferred; /* Resend these interrupts when we | |
646 | * bale from the ISR */ | |
647 | u16 io_size; /* Size of PCI region (for release_region) */ | |
648 | spinlock_t lock; /* Serialise access to device & its vortex_private */ | |
649 | struct mii_if_info mii; /* MII lib hooks/info */ | |
650 | }; | |
651 | ||
652 | #ifdef CONFIG_PCI | |
653 | #define DEVICE_PCI(dev) (((dev)->bus == &pci_bus_type) ? to_pci_dev((dev)) : NULL) | |
654 | #else | |
655 | #define DEVICE_PCI(dev) NULL | |
656 | #endif | |
657 | ||
658 | #define VORTEX_PCI(vp) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL) | |
659 | ||
660 | #ifdef CONFIG_EISA | |
661 | #define DEVICE_EISA(dev) (((dev)->bus == &eisa_bus_type) ? to_eisa_device((dev)) : NULL) | |
662 | #else | |
663 | #define DEVICE_EISA(dev) NULL | |
664 | #endif | |
665 | ||
666 | #define VORTEX_EISA(vp) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL) | |
667 | ||
668 | /* The action to take with a media selection timer tick. | |
669 | Note that we deviate from the 3Com order by checking 10base2 before AUI. | |
670 | */ | |
671 | enum xcvr_types { | |
672 | XCVR_10baseT=0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx, | |
673 | XCVR_100baseFx, XCVR_MII=6, XCVR_NWAY=8, XCVR_ExtMII=9, XCVR_Default=10, | |
674 | }; | |
675 | ||
f71e1309 | 676 | static const struct media_table { |
1da177e4 LT |
677 | char *name; |
678 | unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */ | |
679 | mask:8, /* The transceiver-present bit in Wn3_Config.*/ | |
680 | next:8; /* The media type to try next. */ | |
681 | int wait; /* Time before we check media status. */ | |
682 | } media_tbl[] = { | |
683 | { "10baseT", Media_10TP,0x08, XCVR_10base2, (14*HZ)/10}, | |
684 | { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1*HZ)/10}, | |
685 | { "undefined", 0, 0x80, XCVR_10baseT, 10000}, | |
686 | { "10base2", 0, 0x10, XCVR_AUI, (1*HZ)/10}, | |
687 | { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14*HZ)/10}, | |
688 | { "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14*HZ)/10}, | |
689 | { "MII", 0, 0x41, XCVR_10baseT, 3*HZ }, | |
690 | { "undefined", 0, 0x01, XCVR_10baseT, 10000}, | |
691 | { "Autonegotiate", 0, 0x41, XCVR_10baseT, 3*HZ}, | |
692 | { "MII-External", 0, 0x41, XCVR_10baseT, 3*HZ }, | |
693 | { "Default", 0, 0xFF, XCVR_10baseT, 10000}, | |
694 | }; | |
695 | ||
696 | static struct { | |
697 | const char str[ETH_GSTRING_LEN]; | |
698 | } ethtool_stats_keys[] = { | |
699 | { "tx_deferred" }, | |
8d1d0340 | 700 | { "tx_max_collisions" }, |
1da177e4 | 701 | { "tx_multiple_collisions" }, |
8d1d0340 | 702 | { "tx_single_collisions" }, |
1da177e4 LT |
703 | { "rx_bad_ssd" }, |
704 | }; | |
705 | ||
706 | /* number of ETHTOOL_GSTATS u64's */ | |
8d1d0340 | 707 | #define VORTEX_NUM_STATS 5 |
1da177e4 | 708 | |
62afe595 | 709 | static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq, |
1da177e4 | 710 | int chip_idx, int card_idx); |
c8303d10 | 711 | static int vortex_up(struct net_device *dev); |
1da177e4 LT |
712 | static void vortex_down(struct net_device *dev, int final); |
713 | static int vortex_open(struct net_device *dev); | |
62afe595 | 714 | static void mdio_sync(void __iomem *ioaddr, int bits); |
1da177e4 LT |
715 | static int mdio_read(struct net_device *dev, int phy_id, int location); |
716 | static void mdio_write(struct net_device *vp, int phy_id, int location, int value); | |
717 | static void vortex_timer(unsigned long arg); | |
718 | static void rx_oom_timer(unsigned long arg); | |
27a1de95 SH |
719 | static netdev_tx_t vortex_start_xmit(struct sk_buff *skb, |
720 | struct net_device *dev); | |
721 | static netdev_tx_t boomerang_start_xmit(struct sk_buff *skb, | |
722 | struct net_device *dev); | |
1da177e4 LT |
723 | static int vortex_rx(struct net_device *dev); |
724 | static int boomerang_rx(struct net_device *dev); | |
7d12e780 DH |
725 | static irqreturn_t vortex_interrupt(int irq, void *dev_id); |
726 | static irqreturn_t boomerang_interrupt(int irq, void *dev_id); | |
1da177e4 LT |
727 | static int vortex_close(struct net_device *dev); |
728 | static void dump_tx_ring(struct net_device *dev); | |
62afe595 | 729 | static void update_stats(void __iomem *ioaddr, struct net_device *dev); |
1da177e4 LT |
730 | static struct net_device_stats *vortex_get_stats(struct net_device *dev); |
731 | static void set_rx_mode(struct net_device *dev); | |
732 | #ifdef CONFIG_PCI | |
733 | static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | |
734 | #endif | |
735 | static void vortex_tx_timeout(struct net_device *dev); | |
736 | static void acpi_set_WOL(struct net_device *dev); | |
7282d491 | 737 | static const struct ethtool_ops vortex_ethtool_ops; |
1da177e4 LT |
738 | static void set_8021q_mode(struct net_device *dev, int enable); |
739 | ||
1da177e4 LT |
740 | /* This driver uses 'options' to pass the media type, full-duplex flag, etc. */ |
741 | /* Option count limit only -- unlimited interfaces are supported. */ | |
742 | #define MAX_UNITS 8 | |
9954ab7f JL |
743 | static int options[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 }; |
744 | static int full_duplex[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; | |
745 | static int hw_checksums[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; | |
746 | static int flow_ctrl[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; | |
747 | static int enable_wol[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; | |
900fd17d | 748 | static int use_mmio[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; |
1da177e4 LT |
749 | static int global_options = -1; |
750 | static int global_full_duplex = -1; | |
751 | static int global_enable_wol = -1; | |
900fd17d | 752 | static int global_use_mmio = -1; |
1da177e4 | 753 | |
1da177e4 LT |
754 | /* Variables to work-around the Compaq PCI BIOS32 problem. */ |
755 | static int compaq_ioaddr, compaq_irq, compaq_device_id = 0x5900; | |
756 | static struct net_device *compaq_net_device; | |
757 | ||
758 | static int vortex_cards_found; | |
759 | ||
760 | module_param(debug, int, 0); | |
761 | module_param(global_options, int, 0); | |
762 | module_param_array(options, int, NULL, 0); | |
763 | module_param(global_full_duplex, int, 0); | |
764 | module_param_array(full_duplex, int, NULL, 0); | |
765 | module_param_array(hw_checksums, int, NULL, 0); | |
766 | module_param_array(flow_ctrl, int, NULL, 0); | |
767 | module_param(global_enable_wol, int, 0); | |
768 | module_param_array(enable_wol, int, NULL, 0); | |
769 | module_param(rx_copybreak, int, 0); | |
770 | module_param(max_interrupt_work, int, 0); | |
771 | module_param(compaq_ioaddr, int, 0); | |
772 | module_param(compaq_irq, int, 0); | |
773 | module_param(compaq_device_id, int, 0); | |
774 | module_param(watchdog, int, 0); | |
900fd17d JL |
775 | module_param(global_use_mmio, int, 0); |
776 | module_param_array(use_mmio, int, NULL, 0); | |
1da177e4 LT |
777 | MODULE_PARM_DESC(debug, "3c59x debug level (0-6)"); |
778 | MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex"); | |
779 | MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset"); | |
780 | MODULE_PARM_DESC(full_duplex, "3c59x full duplex setting(s) (1)"); | |
46e5e4a8 | 781 | MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if full_duplex is unset"); |
1da177e4 LT |
782 | MODULE_PARM_DESC(hw_checksums, "3c59x Hardware checksum checking by adapter(s) (0-1)"); |
783 | MODULE_PARM_DESC(flow_ctrl, "3c59x 802.3x flow control usage (PAUSE only) (0-1)"); | |
784 | MODULE_PARM_DESC(enable_wol, "3c59x: Turn on Wake-on-LAN for adapter(s) (0-1)"); | |
46e5e4a8 | 785 | MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if enable_wol is unset"); |
1da177e4 LT |
786 | MODULE_PARM_DESC(rx_copybreak, "3c59x copy breakpoint for copy-only-tiny-frames"); |
787 | MODULE_PARM_DESC(max_interrupt_work, "3c59x maximum events handled per interrupt"); | |
788 | MODULE_PARM_DESC(compaq_ioaddr, "3c59x PCI I/O base address (Compaq BIOS problem workaround)"); | |
789 | MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)"); | |
790 | MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)"); | |
791 | MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds"); | |
900fd17d JL |
792 | MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset"); |
793 | MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)"); | |
1da177e4 LT |
794 | |
795 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
796 | static void poll_vortex(struct net_device *dev) | |
797 | { | |
798 | struct vortex_private *vp = netdev_priv(dev); | |
799 | unsigned long flags; | |
0d38ff1d | 800 | local_irq_save(flags); |
7d12e780 | 801 | (vp->full_bus_master_rx ? boomerang_interrupt:vortex_interrupt)(dev->irq,dev); |
1da177e4 | 802 | local_irq_restore(flags); |
6aa20a22 | 803 | } |
1da177e4 LT |
804 | #endif |
805 | ||
806 | #ifdef CONFIG_PM | |
807 | ||
7bfc4ab5 | 808 | static int vortex_suspend(struct device *dev) |
1da177e4 | 809 | { |
7bfc4ab5 AV |
810 | struct pci_dev *pdev = to_pci_dev(dev); |
811 | struct net_device *ndev = pci_get_drvdata(pdev); | |
812 | ||
813 | if (!ndev || !netif_running(ndev)) | |
814 | return 0; | |
815 | ||
816 | netif_device_detach(ndev); | |
817 | vortex_down(ndev, 1); | |
1da177e4 | 818 | |
1da177e4 LT |
819 | return 0; |
820 | } | |
821 | ||
7bfc4ab5 | 822 | static int vortex_resume(struct device *dev) |
1da177e4 | 823 | { |
7bfc4ab5 AV |
824 | struct pci_dev *pdev = to_pci_dev(dev); |
825 | struct net_device *ndev = pci_get_drvdata(pdev); | |
e1265153 | 826 | int err; |
1da177e4 | 827 | |
7bfc4ab5 AV |
828 | if (!ndev || !netif_running(ndev)) |
829 | return 0; | |
830 | ||
831 | err = vortex_up(ndev); | |
832 | if (err) | |
833 | return err; | |
834 | ||
835 | netif_device_attach(ndev); | |
836 | ||
1da177e4 LT |
837 | return 0; |
838 | } | |
839 | ||
47145210 | 840 | static const struct dev_pm_ops vortex_pm_ops = { |
7bfc4ab5 AV |
841 | .suspend = vortex_suspend, |
842 | .resume = vortex_resume, | |
843 | .freeze = vortex_suspend, | |
844 | .thaw = vortex_resume, | |
845 | .poweroff = vortex_suspend, | |
846 | .restore = vortex_resume, | |
847 | }; | |
848 | ||
849 | #define VORTEX_PM_OPS (&vortex_pm_ops) | |
850 | ||
851 | #else /* !CONFIG_PM */ | |
852 | ||
853 | #define VORTEX_PM_OPS NULL | |
854 | ||
855 | #endif /* !CONFIG_PM */ | |
1da177e4 LT |
856 | |
857 | #ifdef CONFIG_EISA | |
858 | static struct eisa_device_id vortex_eisa_ids[] = { | |
859 | { "TCM5920", CH_3C592 }, | |
860 | { "TCM5970", CH_3C597 }, | |
861 | { "" } | |
862 | }; | |
07563c71 | 863 | MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids); |
1da177e4 | 864 | |
95c408a9 | 865 | static int __init vortex_eisa_probe(struct device *device) |
1da177e4 | 866 | { |
62afe595 | 867 | void __iomem *ioaddr; |
1da177e4 LT |
868 | struct eisa_device *edev; |
869 | ||
a880c4cd | 870 | edev = to_eisa_device(device); |
1da177e4 | 871 | |
62afe595 | 872 | if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME)) |
1da177e4 LT |
873 | return -EBUSY; |
874 | ||
62afe595 JL |
875 | ioaddr = ioport_map(edev->base_addr, VORTEX_TOTAL_SIZE); |
876 | ||
877 | if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12, | |
1da177e4 | 878 | edev->id.driver_data, vortex_cards_found)) { |
a880c4cd | 879 | release_region(edev->base_addr, VORTEX_TOTAL_SIZE); |
1da177e4 LT |
880 | return -ENODEV; |
881 | } | |
882 | ||
883 | vortex_cards_found++; | |
884 | ||
885 | return 0; | |
886 | } | |
887 | ||
95c408a9 | 888 | static int __devexit vortex_eisa_remove(struct device *device) |
1da177e4 LT |
889 | { |
890 | struct eisa_device *edev; | |
891 | struct net_device *dev; | |
892 | struct vortex_private *vp; | |
62afe595 | 893 | void __iomem *ioaddr; |
1da177e4 | 894 | |
a880c4cd SK |
895 | edev = to_eisa_device(device); |
896 | dev = eisa_get_drvdata(edev); | |
1da177e4 LT |
897 | |
898 | if (!dev) { | |
39738e16 | 899 | pr_err("vortex_eisa_remove called for Compaq device!\n"); |
1da177e4 LT |
900 | BUG(); |
901 | } | |
902 | ||
903 | vp = netdev_priv(dev); | |
62afe595 | 904 | ioaddr = vp->ioaddr; |
6aa20a22 | 905 | |
a880c4cd SK |
906 | unregister_netdev(dev); |
907 | iowrite16(TotalReset|0x14, ioaddr + EL3_CMD); | |
908 | release_region(dev->base_addr, VORTEX_TOTAL_SIZE); | |
1da177e4 | 909 | |
a880c4cd | 910 | free_netdev(dev); |
1da177e4 LT |
911 | return 0; |
912 | } | |
95c408a9 RB |
913 | |
914 | static struct eisa_driver vortex_eisa_driver = { | |
915 | .id_table = vortex_eisa_ids, | |
916 | .driver = { | |
917 | .name = "3c59x", | |
918 | .probe = vortex_eisa_probe, | |
919 | .remove = __devexit_p(vortex_eisa_remove) | |
920 | } | |
921 | }; | |
922 | ||
923 | #endif /* CONFIG_EISA */ | |
1da177e4 LT |
924 | |
925 | /* returns count found (>= 0), or negative on error */ | |
a880c4cd | 926 | static int __init vortex_eisa_init(void) |
1da177e4 LT |
927 | { |
928 | int eisa_found = 0; | |
929 | int orig_cards_found = vortex_cards_found; | |
930 | ||
931 | #ifdef CONFIG_EISA | |
c2f6fabb BH |
932 | int err; |
933 | ||
934 | err = eisa_driver_register (&vortex_eisa_driver); | |
935 | if (!err) { | |
936 | /* | |
937 | * Because of the way EISA bus is probed, we cannot assume | |
938 | * any device have been found when we exit from | |
939 | * eisa_driver_register (the bus root driver may not be | |
940 | * initialized yet). So we blindly assume something was | |
941 | * found, and let the sysfs magic happend... | |
942 | */ | |
943 | eisa_found = 1; | |
1da177e4 LT |
944 | } |
945 | #endif | |
6aa20a22 | 946 | |
1da177e4 LT |
947 | /* Special code to work-around the Compaq PCI BIOS32 problem. */ |
948 | if (compaq_ioaddr) { | |
62afe595 JL |
949 | vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE), |
950 | compaq_irq, compaq_device_id, vortex_cards_found++); | |
1da177e4 LT |
951 | } |
952 | ||
953 | return vortex_cards_found - orig_cards_found + eisa_found; | |
954 | } | |
955 | ||
956 | /* returns count (>= 0), or negative on error */ | |
a880c4cd | 957 | static int __devinit vortex_init_one(struct pci_dev *pdev, |
1da177e4 LT |
958 | const struct pci_device_id *ent) |
959 | { | |
900fd17d JL |
960 | int rc, unit, pci_bar; |
961 | struct vortex_chip_info *vci; | |
962 | void __iomem *ioaddr; | |
1da177e4 | 963 | |
6aa20a22 | 964 | /* wake up and enable device */ |
a880c4cd | 965 | rc = pci_enable_device(pdev); |
1da177e4 LT |
966 | if (rc < 0) |
967 | goto out; | |
968 | ||
900fd17d JL |
969 | unit = vortex_cards_found; |
970 | ||
971 | if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) { | |
972 | /* Determine the default if the user didn't override us */ | |
973 | vci = &vortex_info_tbl[ent->driver_data]; | |
974 | pci_bar = vci->drv_flags & (IS_CYCLONE | IS_TORNADO) ? 1 : 0; | |
975 | } else if (unit < MAX_UNITS && use_mmio[unit] >= 0) | |
976 | pci_bar = use_mmio[unit] ? 1 : 0; | |
977 | else | |
978 | pci_bar = global_use_mmio ? 1 : 0; | |
979 | ||
980 | ioaddr = pci_iomap(pdev, pci_bar, 0); | |
981 | if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */ | |
982 | ioaddr = pci_iomap(pdev, 0, 0); | |
983 | ||
984 | rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq, | |
985 | ent->driver_data, unit); | |
1da177e4 | 986 | if (rc < 0) { |
a880c4cd | 987 | pci_disable_device(pdev); |
1da177e4 LT |
988 | goto out; |
989 | } | |
990 | ||
991 | vortex_cards_found++; | |
992 | ||
993 | out: | |
994 | return rc; | |
995 | } | |
996 | ||
48b47a5e SH |
997 | static const struct net_device_ops boomrang_netdev_ops = { |
998 | .ndo_open = vortex_open, | |
999 | .ndo_stop = vortex_close, | |
1000 | .ndo_start_xmit = boomerang_start_xmit, | |
1001 | .ndo_tx_timeout = vortex_tx_timeout, | |
1002 | .ndo_get_stats = vortex_get_stats, | |
1003 | #ifdef CONFIG_PCI | |
1004 | .ndo_do_ioctl = vortex_ioctl, | |
1005 | #endif | |
1006 | .ndo_set_multicast_list = set_rx_mode, | |
1007 | .ndo_change_mtu = eth_change_mtu, | |
1008 | .ndo_set_mac_address = eth_mac_addr, | |
1009 | .ndo_validate_addr = eth_validate_addr, | |
1010 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
1011 | .ndo_poll_controller = poll_vortex, | |
1012 | #endif | |
1013 | }; | |
1014 | ||
1015 | static const struct net_device_ops vortex_netdev_ops = { | |
1016 | .ndo_open = vortex_open, | |
1017 | .ndo_stop = vortex_close, | |
1018 | .ndo_start_xmit = vortex_start_xmit, | |
1019 | .ndo_tx_timeout = vortex_tx_timeout, | |
1020 | .ndo_get_stats = vortex_get_stats, | |
1021 | #ifdef CONFIG_PCI | |
1022 | .ndo_do_ioctl = vortex_ioctl, | |
1023 | #endif | |
1024 | .ndo_set_multicast_list = set_rx_mode, | |
1025 | .ndo_change_mtu = eth_change_mtu, | |
1026 | .ndo_set_mac_address = eth_mac_addr, | |
1027 | .ndo_validate_addr = eth_validate_addr, | |
1028 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
1029 | .ndo_poll_controller = poll_vortex, | |
1030 | #endif | |
1031 | }; | |
1032 | ||
1da177e4 LT |
1033 | /* |
1034 | * Start up the PCI/EISA device which is described by *gendev. | |
1035 | * Return 0 on success. | |
1036 | * | |
1037 | * NOTE: pdev can be NULL, for the case of a Compaq device | |
1038 | */ | |
1039 | static int __devinit vortex_probe1(struct device *gendev, | |
62afe595 | 1040 | void __iomem *ioaddr, int irq, |
1da177e4 LT |
1041 | int chip_idx, int card_idx) |
1042 | { | |
1043 | struct vortex_private *vp; | |
1044 | int option; | |
1045 | unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */ | |
1046 | int i, step; | |
1047 | struct net_device *dev; | |
1048 | static int printed_version; | |
1049 | int retval, print_info; | |
1050 | struct vortex_chip_info * const vci = &vortex_info_tbl[chip_idx]; | |
361d5ee3 | 1051 | const char *print_name = "3c59x"; |
1da177e4 LT |
1052 | struct pci_dev *pdev = NULL; |
1053 | struct eisa_device *edev = NULL; | |
1054 | ||
1055 | if (!printed_version) { | |
39738e16 | 1056 | pr_info("%s", version); |
1da177e4 LT |
1057 | printed_version = 1; |
1058 | } | |
1059 | ||
1060 | if (gendev) { | |
1061 | if ((pdev = DEVICE_PCI(gendev))) { | |
1062 | print_name = pci_name(pdev); | |
1063 | } | |
1064 | ||
1065 | if ((edev = DEVICE_EISA(gendev))) { | |
fb28ad35 | 1066 | print_name = dev_name(&edev->dev); |
1da177e4 LT |
1067 | } |
1068 | } | |
1069 | ||
1070 | dev = alloc_etherdev(sizeof(*vp)); | |
1071 | retval = -ENOMEM; | |
1072 | if (!dev) { | |
39738e16 | 1073 | pr_err(PFX "unable to allocate etherdev, aborting\n"); |
1da177e4 LT |
1074 | goto out; |
1075 | } | |
1da177e4 LT |
1076 | SET_NETDEV_DEV(dev, gendev); |
1077 | vp = netdev_priv(dev); | |
1078 | ||
1079 | option = global_options; | |
1080 | ||
1081 | /* The lower four bits are the media type. */ | |
1082 | if (dev->mem_start) { | |
1083 | /* | |
1084 | * The 'options' param is passed in as the third arg to the | |
1085 | * LILO 'ether=' argument for non-modular use | |
1086 | */ | |
1087 | option = dev->mem_start; | |
1088 | } | |
1089 | else if (card_idx < MAX_UNITS) { | |
1090 | if (options[card_idx] >= 0) | |
1091 | option = options[card_idx]; | |
1092 | } | |
1093 | ||
1094 | if (option > 0) { | |
1095 | if (option & 0x8000) | |
1096 | vortex_debug = 7; | |
1097 | if (option & 0x4000) | |
1098 | vortex_debug = 2; | |
1099 | if (option & 0x0400) | |
1100 | vp->enable_wol = 1; | |
1101 | } | |
1102 | ||
1103 | print_info = (vortex_debug > 1); | |
1104 | if (print_info) | |
39738e16 | 1105 | pr_info("See Documentation/networking/vortex.txt\n"); |
1da177e4 | 1106 | |
39738e16 | 1107 | pr_info("%s: 3Com %s %s at %p.\n", |
1da177e4 LT |
1108 | print_name, |
1109 | pdev ? "PCI" : "EISA", | |
1110 | vci->name, | |
1111 | ioaddr); | |
1112 | ||
62afe595 | 1113 | dev->base_addr = (unsigned long)ioaddr; |
1da177e4 LT |
1114 | dev->irq = irq; |
1115 | dev->mtu = mtu; | |
62afe595 | 1116 | vp->ioaddr = ioaddr; |
1da177e4 LT |
1117 | vp->large_frames = mtu > 1500; |
1118 | vp->drv_flags = vci->drv_flags; | |
1119 | vp->has_nway = (vci->drv_flags & HAS_NWAY) ? 1 : 0; | |
1120 | vp->io_size = vci->io_size; | |
1121 | vp->card_idx = card_idx; | |
1122 | ||
1123 | /* module list only for Compaq device */ | |
1124 | if (gendev == NULL) { | |
1125 | compaq_net_device = dev; | |
1126 | } | |
1127 | ||
1128 | /* PCI-only startup logic */ | |
1129 | if (pdev) { | |
1130 | /* EISA resources already marked, so only PCI needs to do this here */ | |
1131 | /* Ignore return value, because Cardbus drivers already allocate for us */ | |
62afe595 | 1132 | if (request_region(dev->base_addr, vci->io_size, print_name) != NULL) |
1da177e4 LT |
1133 | vp->must_free_region = 1; |
1134 | ||
6aa20a22 | 1135 | /* enable bus-mastering if necessary */ |
1da177e4 | 1136 | if (vci->flags & PCI_USES_MASTER) |
a880c4cd | 1137 | pci_set_master(pdev); |
1da177e4 LT |
1138 | |
1139 | if (vci->drv_flags & IS_VORTEX) { | |
1140 | u8 pci_latency; | |
1141 | u8 new_latency = 248; | |
1142 | ||
1143 | /* Check the PCI latency value. On the 3c590 series the latency timer | |
1144 | must be set to the maximum value to avoid data corruption that occurs | |
1145 | when the timer expires during a transfer. This bug exists the Vortex | |
1146 | chip only. */ | |
1147 | pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); | |
1148 | if (pci_latency < new_latency) { | |
39738e16 | 1149 | pr_info("%s: Overriding PCI latency timer (CFLT) setting of %d, new value is %d.\n", |
1da177e4 | 1150 | print_name, pci_latency, new_latency); |
39738e16 | 1151 | pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency); |
1da177e4 LT |
1152 | } |
1153 | } | |
1154 | } | |
1155 | ||
1156 | spin_lock_init(&vp->lock); | |
1157 | vp->gendev = gendev; | |
1158 | vp->mii.dev = dev; | |
1159 | vp->mii.mdio_read = mdio_read; | |
1160 | vp->mii.mdio_write = mdio_write; | |
1161 | vp->mii.phy_id_mask = 0x1f; | |
1162 | vp->mii.reg_num_mask = 0x1f; | |
1163 | ||
1164 | /* Makes sure rings are at least 16 byte aligned. */ | |
1165 | vp->rx_ring = pci_alloc_consistent(pdev, sizeof(struct boom_rx_desc) * RX_RING_SIZE | |
1166 | + sizeof(struct boom_tx_desc) * TX_RING_SIZE, | |
1167 | &vp->rx_ring_dma); | |
1168 | retval = -ENOMEM; | |
cc2d6596 | 1169 | if (!vp->rx_ring) |
1da177e4 LT |
1170 | goto free_region; |
1171 | ||
1172 | vp->tx_ring = (struct boom_tx_desc *)(vp->rx_ring + RX_RING_SIZE); | |
1173 | vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE; | |
1174 | ||
1175 | /* if we are a PCI driver, we store info in pdev->driver_data | |
6aa20a22 | 1176 | * instead of a module list */ |
1da177e4 LT |
1177 | if (pdev) |
1178 | pci_set_drvdata(pdev, dev); | |
1179 | if (edev) | |
a880c4cd | 1180 | eisa_set_drvdata(edev, dev); |
1da177e4 LT |
1181 | |
1182 | vp->media_override = 7; | |
1183 | if (option >= 0) { | |
1184 | vp->media_override = ((option & 7) == 2) ? 0 : option & 15; | |
1185 | if (vp->media_override != 7) | |
1186 | vp->medialock = 1; | |
1187 | vp->full_duplex = (option & 0x200) ? 1 : 0; | |
1188 | vp->bus_master = (option & 16) ? 1 : 0; | |
1189 | } | |
1190 | ||
1191 | if (global_full_duplex > 0) | |
1192 | vp->full_duplex = 1; | |
1193 | if (global_enable_wol > 0) | |
1194 | vp->enable_wol = 1; | |
1195 | ||
1196 | if (card_idx < MAX_UNITS) { | |
1197 | if (full_duplex[card_idx] > 0) | |
1198 | vp->full_duplex = 1; | |
1199 | if (flow_ctrl[card_idx] > 0) | |
1200 | vp->flow_ctrl = 1; | |
1201 | if (enable_wol[card_idx] > 0) | |
1202 | vp->enable_wol = 1; | |
1203 | } | |
1204 | ||
125d5ce8 | 1205 | vp->mii.force_media = vp->full_duplex; |
1da177e4 LT |
1206 | vp->options = option; |
1207 | /* Read the station address from the EEPROM. */ | |
1208 | EL3WINDOW(0); | |
1209 | { | |
1210 | int base; | |
1211 | ||
1212 | if (vci->drv_flags & EEPROM_8BIT) | |
1213 | base = 0x230; | |
1214 | else if (vci->drv_flags & EEPROM_OFFSET) | |
1215 | base = EEPROM_Read + 0x30; | |
1216 | else | |
1217 | base = EEPROM_Read; | |
1218 | ||
1219 | for (i = 0; i < 0x40; i++) { | |
1220 | int timer; | |
62afe595 | 1221 | iowrite16(base + i, ioaddr + Wn0EepromCmd); |
1da177e4 LT |
1222 | /* Pause for at least 162 us. for the read to take place. */ |
1223 | for (timer = 10; timer >= 0; timer--) { | |
1224 | udelay(162); | |
62afe595 | 1225 | if ((ioread16(ioaddr + Wn0EepromCmd) & 0x8000) == 0) |
1da177e4 LT |
1226 | break; |
1227 | } | |
62afe595 | 1228 | eeprom[i] = ioread16(ioaddr + Wn0EepromData); |
1da177e4 LT |
1229 | } |
1230 | } | |
1231 | for (i = 0; i < 0x18; i++) | |
1232 | checksum ^= eeprom[i]; | |
1233 | checksum = (checksum ^ (checksum >> 8)) & 0xff; | |
1234 | if (checksum != 0x00) { /* Grrr, needless incompatible change 3Com. */ | |
1235 | while (i < 0x21) | |
1236 | checksum ^= eeprom[i++]; | |
1237 | checksum = (checksum ^ (checksum >> 8)) & 0xff; | |
1238 | } | |
1239 | if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO)) | |
39738e16 | 1240 | pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum); |
1da177e4 | 1241 | for (i = 0; i < 3; i++) |
cc2d6596 | 1242 | ((__be16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]); |
bb531fc0 | 1243 | memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); |
0795af57 | 1244 | if (print_info) |
39738e16 | 1245 | pr_cont(" %pM", dev->dev_addr); |
1da177e4 LT |
1246 | /* Unfortunately an all zero eeprom passes the checksum and this |
1247 | gets found in the wild in failure cases. Crypto is hard 8) */ | |
1248 | if (!is_valid_ether_addr(dev->dev_addr)) { | |
1249 | retval = -EINVAL; | |
39738e16 | 1250 | pr_err("*** EEPROM MAC address is invalid.\n"); |
1da177e4 LT |
1251 | goto free_ring; /* With every pack */ |
1252 | } | |
1253 | EL3WINDOW(2); | |
1254 | for (i = 0; i < 6; i++) | |
62afe595 | 1255 | iowrite8(dev->dev_addr[i], ioaddr + i); |
1da177e4 | 1256 | |
1da177e4 | 1257 | if (print_info) |
39738e16 | 1258 | pr_cont(", IRQ %d\n", dev->irq); |
1da177e4 | 1259 | /* Tell them about an invalid IRQ. */ |
60e4ad7a | 1260 | if (dev->irq <= 0 || dev->irq >= nr_irqs) |
39738e16 | 1261 | pr_warning(" *** Warning: IRQ %d is unlikely to work! ***\n", |
1da177e4 | 1262 | dev->irq); |
1da177e4 LT |
1263 | |
1264 | EL3WINDOW(4); | |
62afe595 | 1265 | step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1; |
1da177e4 | 1266 | if (print_info) { |
39738e16 AB |
1267 | pr_info(" product code %02x%02x rev %02x.%d date %02d-%02d-%02d\n", |
1268 | eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14], | |
1da177e4 LT |
1269 | step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9); |
1270 | } | |
1271 | ||
1272 | ||
1273 | if (pdev && vci->drv_flags & HAS_CB_FNS) { | |
1da177e4 LT |
1274 | unsigned short n; |
1275 | ||
62afe595 JL |
1276 | vp->cb_fn_base = pci_iomap(pdev, 2, 0); |
1277 | if (!vp->cb_fn_base) { | |
1da177e4 | 1278 | retval = -ENOMEM; |
62afe595 | 1279 | goto free_ring; |
1da177e4 | 1280 | } |
62afe595 | 1281 | |
1da177e4 | 1282 | if (print_info) { |
39738e16 | 1283 | pr_info("%s: CardBus functions mapped %16.16llx->%p\n", |
7c7459d1 GKH |
1284 | print_name, |
1285 | (unsigned long long)pci_resource_start(pdev, 2), | |
62afe595 | 1286 | vp->cb_fn_base); |
1da177e4 LT |
1287 | } |
1288 | EL3WINDOW(2); | |
1289 | ||
62afe595 | 1290 | n = ioread16(ioaddr + Wn2_ResetOptions) & ~0x4010; |
1da177e4 LT |
1291 | if (vp->drv_flags & INVERT_LED_PWR) |
1292 | n |= 0x10; | |
1293 | if (vp->drv_flags & INVERT_MII_PWR) | |
1294 | n |= 0x4000; | |
62afe595 | 1295 | iowrite16(n, ioaddr + Wn2_ResetOptions); |
1da177e4 LT |
1296 | if (vp->drv_flags & WNO_XCVR_PWR) { |
1297 | EL3WINDOW(0); | |
62afe595 | 1298 | iowrite16(0x0800, ioaddr); |
1da177e4 LT |
1299 | } |
1300 | } | |
1301 | ||
1302 | /* Extract our information from the EEPROM data. */ | |
1303 | vp->info1 = eeprom[13]; | |
1304 | vp->info2 = eeprom[15]; | |
1305 | vp->capabilities = eeprom[16]; | |
1306 | ||
1307 | if (vp->info1 & 0x8000) { | |
1308 | vp->full_duplex = 1; | |
1309 | if (print_info) | |
39738e16 | 1310 | pr_info("Full duplex capable\n"); |
1da177e4 LT |
1311 | } |
1312 | ||
1313 | { | |
f71e1309 | 1314 | static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; |
1da177e4 LT |
1315 | unsigned int config; |
1316 | EL3WINDOW(3); | |
62afe595 | 1317 | vp->available_media = ioread16(ioaddr + Wn3_Options); |
1da177e4 LT |
1318 | if ((vp->available_media & 0xff) == 0) /* Broken 3c916 */ |
1319 | vp->available_media = 0x40; | |
62afe595 | 1320 | config = ioread32(ioaddr + Wn3_Config); |
1da177e4 | 1321 | if (print_info) { |
39738e16 AB |
1322 | pr_debug(" Internal config register is %4.4x, transceivers %#x.\n", |
1323 | config, ioread16(ioaddr + Wn3_Options)); | |
1324 | pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", | |
1da177e4 LT |
1325 | 8 << RAM_SIZE(config), |
1326 | RAM_WIDTH(config) ? "word" : "byte", | |
1327 | ram_split[RAM_SPLIT(config)], | |
1328 | AUTOSELECT(config) ? "autoselect/" : "", | |
1329 | XCVR(config) > XCVR_ExtMII ? "<invalid transceiver>" : | |
1330 | media_tbl[XCVR(config)].name); | |
1331 | } | |
1332 | vp->default_media = XCVR(config); | |
1333 | if (vp->default_media == XCVR_NWAY) | |
1334 | vp->has_nway = 1; | |
1335 | vp->autoselect = AUTOSELECT(config); | |
1336 | } | |
1337 | ||
1338 | if (vp->media_override != 7) { | |
39738e16 | 1339 | pr_info("%s: Media override to transceiver type %d (%s).\n", |
1da177e4 LT |
1340 | print_name, vp->media_override, |
1341 | media_tbl[vp->media_override].name); | |
1342 | dev->if_port = vp->media_override; | |
1343 | } else | |
1344 | dev->if_port = vp->default_media; | |
1345 | ||
1346 | if ((vp->available_media & 0x40) || (vci->drv_flags & HAS_NWAY) || | |
1347 | dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { | |
1348 | int phy, phy_idx = 0; | |
1349 | EL3WINDOW(4); | |
1350 | mii_preamble_required++; | |
1351 | if (vp->drv_flags & EXTRA_PREAMBLE) | |
1352 | mii_preamble_required++; | |
1353 | mdio_sync(ioaddr, 32); | |
106427e6 | 1354 | mdio_read(dev, 24, MII_BMSR); |
1da177e4 LT |
1355 | for (phy = 0; phy < 32 && phy_idx < 1; phy++) { |
1356 | int mii_status, phyx; | |
1357 | ||
1358 | /* | |
1359 | * For the 3c905CX we look at index 24 first, because it bogusly | |
1360 | * reports an external PHY at all indices | |
1361 | */ | |
1362 | if (phy == 0) | |
1363 | phyx = 24; | |
1364 | else if (phy <= 24) | |
1365 | phyx = phy - 1; | |
1366 | else | |
1367 | phyx = phy; | |
106427e6 | 1368 | mii_status = mdio_read(dev, phyx, MII_BMSR); |
1da177e4 LT |
1369 | if (mii_status && mii_status != 0xffff) { |
1370 | vp->phys[phy_idx++] = phyx; | |
1371 | if (print_info) { | |
39738e16 AB |
1372 | pr_info(" MII transceiver found at address %d, status %4x.\n", |
1373 | phyx, mii_status); | |
1da177e4 LT |
1374 | } |
1375 | if ((mii_status & 0x0040) == 0) | |
1376 | mii_preamble_required++; | |
1377 | } | |
1378 | } | |
1379 | mii_preamble_required--; | |
1380 | if (phy_idx == 0) { | |
39738e16 | 1381 | pr_warning(" ***WARNING*** No MII transceivers found!\n"); |
1da177e4 LT |
1382 | vp->phys[0] = 24; |
1383 | } else { | |
106427e6 | 1384 | vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE); |
1da177e4 LT |
1385 | if (vp->full_duplex) { |
1386 | /* Only advertise the FD media types. */ | |
1387 | vp->advertising &= ~0x02A0; | |
1388 | mdio_write(dev, vp->phys[0], 4, vp->advertising); | |
1389 | } | |
1390 | } | |
1391 | vp->mii.phy_id = vp->phys[0]; | |
1392 | } | |
1393 | ||
1394 | if (vp->capabilities & CapBusMaster) { | |
1395 | vp->full_bus_master_tx = 1; | |
1396 | if (print_info) { | |
39738e16 | 1397 | pr_info(" Enabling bus-master transmits and %s receives.\n", |
1da177e4 LT |
1398 | (vp->info2 & 1) ? "early" : "whole-frame" ); |
1399 | } | |
1400 | vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2; | |
1401 | vp->bus_master = 0; /* AKPM: vortex only */ | |
1402 | } | |
1403 | ||
1404 | /* The 3c59x-specific entries in the device structure. */ | |
1da177e4 | 1405 | if (vp->full_bus_master_tx) { |
48b47a5e | 1406 | dev->netdev_ops = &boomrang_netdev_ops; |
1da177e4 | 1407 | /* Actually, it still should work with iommu. */ |
32fb5f06 JL |
1408 | if (card_idx < MAX_UNITS && |
1409 | ((hw_checksums[card_idx] == -1 && (vp->drv_flags & HAS_HWCKSM)) || | |
1410 | hw_checksums[card_idx] == 1)) { | |
d311b0d3 | 1411 | dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; |
1da177e4 | 1412 | } |
48b47a5e SH |
1413 | } else |
1414 | dev->netdev_ops = &vortex_netdev_ops; | |
1da177e4 LT |
1415 | |
1416 | if (print_info) { | |
39738e16 | 1417 | pr_info("%s: scatter/gather %sabled. h/w checksums %sabled\n", |
1da177e4 LT |
1418 | print_name, |
1419 | (dev->features & NETIF_F_SG) ? "en":"dis", | |
1420 | (dev->features & NETIF_F_IP_CSUM) ? "en":"dis"); | |
1421 | } | |
1422 | ||
1da177e4 | 1423 | dev->ethtool_ops = &vortex_ethtool_ops; |
1da177e4 | 1424 | dev->watchdog_timeo = (watchdog * HZ) / 1000; |
48b47a5e | 1425 | |
1da177e4 LT |
1426 | if (pdev) { |
1427 | vp->pm_state_valid = 1; | |
1428 | pci_save_state(VORTEX_PCI(vp)); | |
1429 | acpi_set_WOL(dev); | |
1430 | } | |
1431 | retval = register_netdev(dev); | |
1432 | if (retval == 0) | |
1433 | return 0; | |
1434 | ||
1435 | free_ring: | |
1436 | pci_free_consistent(pdev, | |
1437 | sizeof(struct boom_rx_desc) * RX_RING_SIZE | |
1438 | + sizeof(struct boom_tx_desc) * TX_RING_SIZE, | |
1439 | vp->rx_ring, | |
1440 | vp->rx_ring_dma); | |
1441 | free_region: | |
1442 | if (vp->must_free_region) | |
62afe595 | 1443 | release_region(dev->base_addr, vci->io_size); |
1da177e4 | 1444 | free_netdev(dev); |
39738e16 | 1445 | pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval); |
1da177e4 LT |
1446 | out: |
1447 | return retval; | |
1448 | } | |
1449 | ||
1450 | static void | |
1451 | issue_and_wait(struct net_device *dev, int cmd) | |
1452 | { | |
62afe595 JL |
1453 | struct vortex_private *vp = netdev_priv(dev); |
1454 | void __iomem *ioaddr = vp->ioaddr; | |
1da177e4 LT |
1455 | int i; |
1456 | ||
62afe595 | 1457 | iowrite16(cmd, ioaddr + EL3_CMD); |
1da177e4 | 1458 | for (i = 0; i < 2000; i++) { |
62afe595 | 1459 | if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) |
1da177e4 LT |
1460 | return; |
1461 | } | |
1462 | ||
1463 | /* OK, that didn't work. Do it the slow way. One second */ | |
1464 | for (i = 0; i < 100000; i++) { | |
62afe595 | 1465 | if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) { |
1da177e4 | 1466 | if (vortex_debug > 1) |
39738e16 | 1467 | pr_info("%s: command 0x%04x took %d usecs\n", |
1da177e4 LT |
1468 | dev->name, cmd, i * 10); |
1469 | return; | |
1470 | } | |
1471 | udelay(10); | |
1472 | } | |
39738e16 | 1473 | pr_err("%s: command 0x%04x did not complete! Status=0x%x\n", |
62afe595 | 1474 | dev->name, cmd, ioread16(ioaddr + EL3_STATUS)); |
1da177e4 LT |
1475 | } |
1476 | ||
125d5ce8 SK |
1477 | static void |
1478 | vortex_set_duplex(struct net_device *dev) | |
1479 | { | |
1480 | struct vortex_private *vp = netdev_priv(dev); | |
1481 | void __iomem *ioaddr = vp->ioaddr; | |
1482 | ||
39738e16 | 1483 | pr_info("%s: setting %s-duplex.\n", |
125d5ce8 SK |
1484 | dev->name, (vp->full_duplex) ? "full" : "half"); |
1485 | ||
1486 | EL3WINDOW(3); | |
1487 | /* Set the full-duplex bit. */ | |
1488 | iowrite16(((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) | | |
1489 | (vp->large_frames ? 0x40 : 0) | | |
1490 | ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? | |
1491 | 0x100 : 0), | |
1492 | ioaddr + Wn3_MAC_Ctrl); | |
125d5ce8 SK |
1493 | } |
1494 | ||
1495 | static void vortex_check_media(struct net_device *dev, unsigned int init) | |
1496 | { | |
1497 | struct vortex_private *vp = netdev_priv(dev); | |
1498 | unsigned int ok_to_print = 0; | |
1499 | ||
1500 | if (vortex_debug > 3) | |
1501 | ok_to_print = 1; | |
1502 | ||
1503 | if (mii_check_media(&vp->mii, ok_to_print, init)) { | |
1504 | vp->full_duplex = vp->mii.full_duplex; | |
1505 | vortex_set_duplex(dev); | |
1506 | } else if (init) { | |
1507 | vortex_set_duplex(dev); | |
1508 | } | |
1509 | } | |
1510 | ||
c8303d10 | 1511 | static int |
1da177e4 LT |
1512 | vortex_up(struct net_device *dev) |
1513 | { | |
1da177e4 | 1514 | struct vortex_private *vp = netdev_priv(dev); |
62afe595 | 1515 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 | 1516 | unsigned int config; |
0280f9f9 | 1517 | int i, mii_reg1, mii_reg5, err = 0; |
1da177e4 LT |
1518 | |
1519 | if (VORTEX_PCI(vp)) { | |
1520 | pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */ | |
3c8fad18 DR |
1521 | if (vp->pm_state_valid) |
1522 | pci_restore_state(VORTEX_PCI(vp)); | |
c8303d10 MH |
1523 | err = pci_enable_device(VORTEX_PCI(vp)); |
1524 | if (err) { | |
39738e16 | 1525 | pr_warning("%s: Could not enable device\n", |
c8303d10 MH |
1526 | dev->name); |
1527 | goto err_out; | |
1528 | } | |
1da177e4 LT |
1529 | } |
1530 | ||
1531 | /* Before initializing select the active media port. */ | |
1532 | EL3WINDOW(3); | |
62afe595 | 1533 | config = ioread32(ioaddr + Wn3_Config); |
1da177e4 LT |
1534 | |
1535 | if (vp->media_override != 7) { | |
39738e16 | 1536 | pr_info("%s: Media override to transceiver %d (%s).\n", |
1da177e4 LT |
1537 | dev->name, vp->media_override, |
1538 | media_tbl[vp->media_override].name); | |
1539 | dev->if_port = vp->media_override; | |
1540 | } else if (vp->autoselect) { | |
1541 | if (vp->has_nway) { | |
1542 | if (vortex_debug > 1) | |
39738e16 | 1543 | pr_info("%s: using NWAY device table, not %d\n", |
1da177e4 LT |
1544 | dev->name, dev->if_port); |
1545 | dev->if_port = XCVR_NWAY; | |
1546 | } else { | |
1547 | /* Find first available media type, starting with 100baseTx. */ | |
1548 | dev->if_port = XCVR_100baseTx; | |
1549 | while (! (vp->available_media & media_tbl[dev->if_port].mask)) | |
1550 | dev->if_port = media_tbl[dev->if_port].next; | |
1551 | if (vortex_debug > 1) | |
39738e16 | 1552 | pr_info("%s: first available media type: %s\n", |
1da177e4 LT |
1553 | dev->name, media_tbl[dev->if_port].name); |
1554 | } | |
1555 | } else { | |
1556 | dev->if_port = vp->default_media; | |
1557 | if (vortex_debug > 1) | |
39738e16 | 1558 | pr_info("%s: using default media %s\n", |
1da177e4 LT |
1559 | dev->name, media_tbl[dev->if_port].name); |
1560 | } | |
1561 | ||
1562 | init_timer(&vp->timer); | |
1563 | vp->timer.expires = RUN_AT(media_tbl[dev->if_port].wait); | |
1564 | vp->timer.data = (unsigned long)dev; | |
1565 | vp->timer.function = vortex_timer; /* timer handler */ | |
1566 | add_timer(&vp->timer); | |
1567 | ||
1568 | init_timer(&vp->rx_oom_timer); | |
1569 | vp->rx_oom_timer.data = (unsigned long)dev; | |
1570 | vp->rx_oom_timer.function = rx_oom_timer; | |
1571 | ||
1572 | if (vortex_debug > 1) | |
39738e16 | 1573 | pr_debug("%s: Initial media type %s.\n", |
1da177e4 LT |
1574 | dev->name, media_tbl[dev->if_port].name); |
1575 | ||
125d5ce8 | 1576 | vp->full_duplex = vp->mii.force_media; |
1da177e4 LT |
1577 | config = BFINS(config, dev->if_port, 20, 4); |
1578 | if (vortex_debug > 6) | |
39738e16 | 1579 | pr_debug("vortex_up(): writing 0x%x to InternalConfig\n", config); |
62afe595 | 1580 | iowrite32(config, ioaddr + Wn3_Config); |
1da177e4 LT |
1581 | |
1582 | if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { | |
1da177e4 | 1583 | EL3WINDOW(4); |
09ce3512 SK |
1584 | mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR); |
1585 | mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA); | |
1586 | vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0); | |
373492d0 | 1587 | vp->mii.full_duplex = vp->full_duplex; |
09ce3512 | 1588 | |
125d5ce8 | 1589 | vortex_check_media(dev, 1); |
1da177e4 | 1590 | } |
125d5ce8 SK |
1591 | else |
1592 | vortex_set_duplex(dev); | |
1da177e4 | 1593 | |
09ce3512 SK |
1594 | issue_and_wait(dev, TxReset); |
1595 | /* | |
1596 | * Don't reset the PHY - that upsets autonegotiation during DHCP operations. | |
1597 | */ | |
1598 | issue_and_wait(dev, RxReset|0x04); | |
1599 | ||
1da177e4 | 1600 | |
62afe595 | 1601 | iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD); |
1da177e4 LT |
1602 | |
1603 | if (vortex_debug > 1) { | |
1604 | EL3WINDOW(4); | |
39738e16 | 1605 | pr_debug("%s: vortex_up() irq %d media status %4.4x.\n", |
62afe595 | 1606 | dev->name, dev->irq, ioread16(ioaddr + Wn4_Media)); |
1da177e4 LT |
1607 | } |
1608 | ||
1609 | /* Set the station address and mask in window 2 each time opened. */ | |
1610 | EL3WINDOW(2); | |
1611 | for (i = 0; i < 6; i++) | |
62afe595 | 1612 | iowrite8(dev->dev_addr[i], ioaddr + i); |
1da177e4 | 1613 | for (; i < 12; i+=2) |
62afe595 | 1614 | iowrite16(0, ioaddr + i); |
1da177e4 LT |
1615 | |
1616 | if (vp->cb_fn_base) { | |
62afe595 | 1617 | unsigned short n = ioread16(ioaddr + Wn2_ResetOptions) & ~0x4010; |
1da177e4 LT |
1618 | if (vp->drv_flags & INVERT_LED_PWR) |
1619 | n |= 0x10; | |
1620 | if (vp->drv_flags & INVERT_MII_PWR) | |
1621 | n |= 0x4000; | |
62afe595 | 1622 | iowrite16(n, ioaddr + Wn2_ResetOptions); |
1da177e4 LT |
1623 | } |
1624 | ||
1625 | if (dev->if_port == XCVR_10base2) | |
1626 | /* Start the thinnet transceiver. We should really wait 50ms...*/ | |
62afe595 | 1627 | iowrite16(StartCoax, ioaddr + EL3_CMD); |
1da177e4 LT |
1628 | if (dev->if_port != XCVR_NWAY) { |
1629 | EL3WINDOW(4); | |
62afe595 | 1630 | iowrite16((ioread16(ioaddr + Wn4_Media) & ~(Media_10TP|Media_SQE)) | |
1da177e4 LT |
1631 | media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media); |
1632 | } | |
1633 | ||
1634 | /* Switch to the stats window, and clear all stats by reading. */ | |
62afe595 | 1635 | iowrite16(StatsDisable, ioaddr + EL3_CMD); |
1da177e4 LT |
1636 | EL3WINDOW(6); |
1637 | for (i = 0; i < 10; i++) | |
62afe595 JL |
1638 | ioread8(ioaddr + i); |
1639 | ioread16(ioaddr + 10); | |
1640 | ioread16(ioaddr + 12); | |
1da177e4 LT |
1641 | /* New: On the Vortex we must also clear the BadSSD counter. */ |
1642 | EL3WINDOW(4); | |
62afe595 | 1643 | ioread8(ioaddr + 12); |
1da177e4 | 1644 | /* ..and on the Boomerang we enable the extra statistics bits. */ |
62afe595 | 1645 | iowrite16(0x0040, ioaddr + Wn4_NetDiag); |
1da177e4 LT |
1646 | |
1647 | /* Switch to register set 7 for normal use. */ | |
1648 | EL3WINDOW(7); | |
1649 | ||
1650 | if (vp->full_bus_master_rx) { /* Boomerang bus master. */ | |
1651 | vp->cur_rx = vp->dirty_rx = 0; | |
1652 | /* Initialize the RxEarly register as recommended. */ | |
62afe595 JL |
1653 | iowrite16(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD); |
1654 | iowrite32(0x0020, ioaddr + PktStatus); | |
1655 | iowrite32(vp->rx_ring_dma, ioaddr + UpListPtr); | |
1da177e4 LT |
1656 | } |
1657 | if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */ | |
1658 | vp->cur_tx = vp->dirty_tx = 0; | |
1659 | if (vp->drv_flags & IS_BOOMERANG) | |
62afe595 | 1660 | iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */ |
1da177e4 LT |
1661 | /* Clear the Rx, Tx rings. */ |
1662 | for (i = 0; i < RX_RING_SIZE; i++) /* AKPM: this is done in vortex_open, too */ | |
1663 | vp->rx_ring[i].status = 0; | |
1664 | for (i = 0; i < TX_RING_SIZE; i++) | |
1665 | vp->tx_skbuff[i] = NULL; | |
62afe595 | 1666 | iowrite32(0, ioaddr + DownListPtr); |
1da177e4 LT |
1667 | } |
1668 | /* Set receiver mode: presumably accept b-case and phys addr only. */ | |
1669 | set_rx_mode(dev); | |
1670 | /* enable 802.1q tagged frames */ | |
1671 | set_8021q_mode(dev, 1); | |
62afe595 | 1672 | iowrite16(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ |
1da177e4 | 1673 | |
62afe595 JL |
1674 | iowrite16(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ |
1675 | iowrite16(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ | |
1da177e4 LT |
1676 | /* Allow status bits to be seen. */ |
1677 | vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete| | |
1678 | (vp->full_bus_master_tx ? DownComplete : TxAvailable) | | |
1679 | (vp->full_bus_master_rx ? UpComplete : RxComplete) | | |
1680 | (vp->bus_master ? DMADone : 0); | |
1681 | vp->intr_enable = SetIntrEnb | IntLatch | TxAvailable | | |
1682 | (vp->full_bus_master_rx ? 0 : RxComplete) | | |
1683 | StatsFull | HostError | TxComplete | IntReq | |
1684 | | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete; | |
62afe595 | 1685 | iowrite16(vp->status_enable, ioaddr + EL3_CMD); |
1da177e4 | 1686 | /* Ack all pending events, and set active indicator mask. */ |
62afe595 | 1687 | iowrite16(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, |
1da177e4 | 1688 | ioaddr + EL3_CMD); |
62afe595 | 1689 | iowrite16(vp->intr_enable, ioaddr + EL3_CMD); |
1da177e4 | 1690 | if (vp->cb_fn_base) /* The PCMCIA people are idiots. */ |
62afe595 | 1691 | iowrite32(0x8000, vp->cb_fn_base + 4); |
1da177e4 | 1692 | netif_start_queue (dev); |
c8303d10 MH |
1693 | err_out: |
1694 | return err; | |
1da177e4 LT |
1695 | } |
1696 | ||
1697 | static int | |
1698 | vortex_open(struct net_device *dev) | |
1699 | { | |
1700 | struct vortex_private *vp = netdev_priv(dev); | |
1701 | int i; | |
1702 | int retval; | |
1703 | ||
1704 | /* Use the now-standard shared IRQ implementation. */ | |
1705 | if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ? | |
1fb9df5d | 1706 | &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev))) { |
39738e16 | 1707 | pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq); |
c8303d10 | 1708 | goto err; |
1da177e4 LT |
1709 | } |
1710 | ||
1711 | if (vp->full_bus_master_rx) { /* Boomerang bus master. */ | |
1712 | if (vortex_debug > 2) | |
39738e16 | 1713 | pr_debug("%s: Filling in the Rx ring.\n", dev->name); |
1da177e4 LT |
1714 | for (i = 0; i < RX_RING_SIZE; i++) { |
1715 | struct sk_buff *skb; | |
1716 | vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1)); | |
1717 | vp->rx_ring[i].status = 0; /* Clear complete bit. */ | |
1718 | vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG); | |
9a5d3414 SH |
1719 | |
1720 | skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN, | |
1721 | GFP_KERNEL); | |
1da177e4 LT |
1722 | vp->rx_skbuff[i] = skb; |
1723 | if (skb == NULL) | |
1724 | break; /* Bad news! */ | |
9a5d3414 SH |
1725 | |
1726 | skb_reserve(skb, NET_IP_ALIGN); /* Align IP on 16 byte boundaries */ | |
689be439 | 1727 | vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); |
1da177e4 LT |
1728 | } |
1729 | if (i != RX_RING_SIZE) { | |
1730 | int j; | |
39738e16 | 1731 | pr_emerg("%s: no memory for rx ring\n", dev->name); |
1da177e4 LT |
1732 | for (j = 0; j < i; j++) { |
1733 | if (vp->rx_skbuff[j]) { | |
1734 | dev_kfree_skb(vp->rx_skbuff[j]); | |
1735 | vp->rx_skbuff[j] = NULL; | |
1736 | } | |
1737 | } | |
1738 | retval = -ENOMEM; | |
c8303d10 | 1739 | goto err_free_irq; |
1da177e4 LT |
1740 | } |
1741 | /* Wrap the ring. */ | |
1742 | vp->rx_ring[i-1].next = cpu_to_le32(vp->rx_ring_dma); | |
1743 | } | |
1744 | ||
c8303d10 MH |
1745 | retval = vortex_up(dev); |
1746 | if (!retval) | |
1747 | goto out; | |
1da177e4 | 1748 | |
c8303d10 | 1749 | err_free_irq: |
1da177e4 | 1750 | free_irq(dev->irq, dev); |
c8303d10 | 1751 | err: |
1da177e4 | 1752 | if (vortex_debug > 1) |
39738e16 | 1753 | pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval); |
c8303d10 | 1754 | out: |
1da177e4 LT |
1755 | return retval; |
1756 | } | |
1757 | ||
1758 | static void | |
1759 | vortex_timer(unsigned long data) | |
1760 | { | |
1761 | struct net_device *dev = (struct net_device *)data; | |
1762 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 1763 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
1764 | int next_tick = 60*HZ; |
1765 | int ok = 0; | |
125d5ce8 | 1766 | int media_status, old_window; |
1da177e4 LT |
1767 | |
1768 | if (vortex_debug > 2) { | |
39738e16 | 1769 | pr_debug("%s: Media selection timer tick happened, %s.\n", |
1da177e4 | 1770 | dev->name, media_tbl[dev->if_port].name); |
39738e16 | 1771 | pr_debug("dev->watchdog_timeo=%d\n", dev->watchdog_timeo); |
1da177e4 LT |
1772 | } |
1773 | ||
0a9da4bd | 1774 | disable_irq_lockdep(dev->irq); |
62afe595 | 1775 | old_window = ioread16(ioaddr + EL3_CMD) >> 13; |
1da177e4 | 1776 | EL3WINDOW(4); |
62afe595 | 1777 | media_status = ioread16(ioaddr + Wn4_Media); |
1da177e4 LT |
1778 | switch (dev->if_port) { |
1779 | case XCVR_10baseT: case XCVR_100baseTx: case XCVR_100baseFx: | |
1780 | if (media_status & Media_LnkBeat) { | |
1781 | netif_carrier_on(dev); | |
1782 | ok = 1; | |
1783 | if (vortex_debug > 1) | |
39738e16 | 1784 | pr_debug("%s: Media %s has link beat, %x.\n", |
1da177e4 LT |
1785 | dev->name, media_tbl[dev->if_port].name, media_status); |
1786 | } else { | |
1787 | netif_carrier_off(dev); | |
1788 | if (vortex_debug > 1) { | |
39738e16 | 1789 | pr_debug("%s: Media %s has no link beat, %x.\n", |
1da177e4 LT |
1790 | dev->name, media_tbl[dev->if_port].name, media_status); |
1791 | } | |
1792 | } | |
1793 | break; | |
1794 | case XCVR_MII: case XCVR_NWAY: | |
1795 | { | |
1da177e4 | 1796 | ok = 1; |
c5643cab IM |
1797 | /* Interrupts are already disabled */ |
1798 | spin_lock(&vp->lock); | |
125d5ce8 | 1799 | vortex_check_media(dev, 0); |
c5643cab | 1800 | spin_unlock(&vp->lock); |
1da177e4 LT |
1801 | } |
1802 | break; | |
1803 | default: /* Other media types handled by Tx timeouts. */ | |
1804 | if (vortex_debug > 1) | |
39738e16 | 1805 | pr_debug("%s: Media %s has no indication, %x.\n", |
1da177e4 LT |
1806 | dev->name, media_tbl[dev->if_port].name, media_status); |
1807 | ok = 1; | |
1808 | } | |
b4ff6450 SK |
1809 | |
1810 | if (!netif_carrier_ok(dev)) | |
1811 | next_tick = 5*HZ; | |
1812 | ||
e94d10eb SK |
1813 | if (vp->medialock) |
1814 | goto leave_media_alone; | |
1815 | ||
a880c4cd | 1816 | if (!ok) { |
1da177e4 LT |
1817 | unsigned int config; |
1818 | ||
1819 | do { | |
1820 | dev->if_port = media_tbl[dev->if_port].next; | |
1821 | } while ( ! (vp->available_media & media_tbl[dev->if_port].mask)); | |
1822 | if (dev->if_port == XCVR_Default) { /* Go back to default. */ | |
1823 | dev->if_port = vp->default_media; | |
1824 | if (vortex_debug > 1) | |
39738e16 | 1825 | pr_debug("%s: Media selection failing, using default %s port.\n", |
1da177e4 LT |
1826 | dev->name, media_tbl[dev->if_port].name); |
1827 | } else { | |
1828 | if (vortex_debug > 1) | |
39738e16 | 1829 | pr_debug("%s: Media selection failed, now trying %s port.\n", |
1da177e4 LT |
1830 | dev->name, media_tbl[dev->if_port].name); |
1831 | next_tick = media_tbl[dev->if_port].wait; | |
1832 | } | |
62afe595 | 1833 | iowrite16((media_status & ~(Media_10TP|Media_SQE)) | |
1da177e4 LT |
1834 | media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media); |
1835 | ||
1836 | EL3WINDOW(3); | |
62afe595 | 1837 | config = ioread32(ioaddr + Wn3_Config); |
1da177e4 | 1838 | config = BFINS(config, dev->if_port, 20, 4); |
62afe595 | 1839 | iowrite32(config, ioaddr + Wn3_Config); |
1da177e4 | 1840 | |
62afe595 | 1841 | iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax, |
1da177e4 LT |
1842 | ioaddr + EL3_CMD); |
1843 | if (vortex_debug > 1) | |
39738e16 | 1844 | pr_debug("wrote 0x%08x to Wn3_Config\n", config); |
1da177e4 LT |
1845 | /* AKPM: FIXME: Should reset Rx & Tx here. P60 of 3c90xc.pdf */ |
1846 | } | |
1da177e4 LT |
1847 | |
1848 | leave_media_alone: | |
1849 | if (vortex_debug > 2) | |
39738e16 | 1850 | pr_debug("%s: Media selection timer finished, %s.\n", |
1da177e4 LT |
1851 | dev->name, media_tbl[dev->if_port].name); |
1852 | ||
e94d10eb | 1853 | EL3WINDOW(old_window); |
0a9da4bd | 1854 | enable_irq_lockdep(dev->irq); |
1da177e4 LT |
1855 | mod_timer(&vp->timer, RUN_AT(next_tick)); |
1856 | if (vp->deferred) | |
62afe595 | 1857 | iowrite16(FakeIntr, ioaddr + EL3_CMD); |
1da177e4 LT |
1858 | return; |
1859 | } | |
1860 | ||
1861 | static void vortex_tx_timeout(struct net_device *dev) | |
1862 | { | |
1863 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 1864 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 | 1865 | |
39738e16 | 1866 | pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n", |
62afe595 JL |
1867 | dev->name, ioread8(ioaddr + TxStatus), |
1868 | ioread16(ioaddr + EL3_STATUS)); | |
1da177e4 | 1869 | EL3WINDOW(4); |
39738e16 | 1870 | pr_err(" diagnostics: net %04x media %04x dma %08x fifo %04x\n", |
62afe595 JL |
1871 | ioread16(ioaddr + Wn4_NetDiag), |
1872 | ioread16(ioaddr + Wn4_Media), | |
1873 | ioread32(ioaddr + PktStatus), | |
1874 | ioread16(ioaddr + Wn4_FIFODiag)); | |
1da177e4 | 1875 | /* Slight code bloat to be user friendly. */ |
62afe595 | 1876 | if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88) |
39738e16 | 1877 | pr_err("%s: Transmitter encountered 16 collisions --" |
1da177e4 | 1878 | " network cable problem?\n", dev->name); |
62afe595 | 1879 | if (ioread16(ioaddr + EL3_STATUS) & IntLatch) { |
39738e16 | 1880 | pr_err("%s: Interrupt posted but not delivered --" |
1da177e4 LT |
1881 | " IRQ blocked by another device?\n", dev->name); |
1882 | /* Bad idea here.. but we might as well handle a few events. */ | |
1883 | { | |
1884 | /* | |
1885 | * Block interrupts because vortex_interrupt does a bare spin_lock() | |
1886 | */ | |
1887 | unsigned long flags; | |
1888 | local_irq_save(flags); | |
1889 | if (vp->full_bus_master_tx) | |
7d12e780 | 1890 | boomerang_interrupt(dev->irq, dev); |
1da177e4 | 1891 | else |
7d12e780 | 1892 | vortex_interrupt(dev->irq, dev); |
1da177e4 LT |
1893 | local_irq_restore(flags); |
1894 | } | |
1895 | } | |
1896 | ||
1897 | if (vortex_debug > 0) | |
1898 | dump_tx_ring(dev); | |
1899 | ||
1900 | issue_and_wait(dev, TxReset); | |
1901 | ||
1daad055 | 1902 | dev->stats.tx_errors++; |
1da177e4 | 1903 | if (vp->full_bus_master_tx) { |
39738e16 | 1904 | pr_debug("%s: Resetting the Tx ring pointer.\n", dev->name); |
62afe595 JL |
1905 | if (vp->cur_tx - vp->dirty_tx > 0 && ioread32(ioaddr + DownListPtr) == 0) |
1906 | iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc), | |
1da177e4 LT |
1907 | ioaddr + DownListPtr); |
1908 | if (vp->cur_tx - vp->dirty_tx < TX_RING_SIZE) | |
1909 | netif_wake_queue (dev); | |
1910 | if (vp->drv_flags & IS_BOOMERANG) | |
62afe595 JL |
1911 | iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); |
1912 | iowrite16(DownUnstall, ioaddr + EL3_CMD); | |
1da177e4 | 1913 | } else { |
1daad055 | 1914 | dev->stats.tx_dropped++; |
1da177e4 LT |
1915 | netif_wake_queue(dev); |
1916 | } | |
6aa20a22 | 1917 | |
1da177e4 | 1918 | /* Issue Tx Enable */ |
62afe595 | 1919 | iowrite16(TxEnable, ioaddr + EL3_CMD); |
1da177e4 | 1920 | dev->trans_start = jiffies; |
6aa20a22 | 1921 | |
1da177e4 LT |
1922 | /* Switch to register set 7 for normal use. */ |
1923 | EL3WINDOW(7); | |
1924 | } | |
1925 | ||
1926 | /* | |
1927 | * Handle uncommon interrupt sources. This is a separate routine to minimize | |
1928 | * the cache impact. | |
1929 | */ | |
1930 | static void | |
1931 | vortex_error(struct net_device *dev, int status) | |
1932 | { | |
1933 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 1934 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
1935 | int do_tx_reset = 0, reset_mask = 0; |
1936 | unsigned char tx_status = 0; | |
1937 | ||
1938 | if (vortex_debug > 2) { | |
39738e16 | 1939 | pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status); |
1da177e4 LT |
1940 | } |
1941 | ||
1942 | if (status & TxComplete) { /* Really "TxError" for us. */ | |
62afe595 | 1943 | tx_status = ioread8(ioaddr + TxStatus); |
1da177e4 | 1944 | /* Presumably a tx-timeout. We must merely re-enable. */ |
8e95a202 JP |
1945 | if (vortex_debug > 2 || |
1946 | (tx_status != 0x88 && vortex_debug > 0)) { | |
39738e16 | 1947 | pr_err("%s: Transmit error, Tx status register %2.2x.\n", |
1da177e4 LT |
1948 | dev->name, tx_status); |
1949 | if (tx_status == 0x82) { | |
39738e16 | 1950 | pr_err("Probably a duplex mismatch. See " |
1da177e4 LT |
1951 | "Documentation/networking/vortex.txt\n"); |
1952 | } | |
1953 | dump_tx_ring(dev); | |
1954 | } | |
1daad055 PZ |
1955 | if (tx_status & 0x14) dev->stats.tx_fifo_errors++; |
1956 | if (tx_status & 0x38) dev->stats.tx_aborted_errors++; | |
0000754c | 1957 | if (tx_status & 0x08) vp->xstats.tx_max_collisions++; |
62afe595 | 1958 | iowrite8(0, ioaddr + TxStatus); |
1da177e4 LT |
1959 | if (tx_status & 0x30) { /* txJabber or txUnderrun */ |
1960 | do_tx_reset = 1; | |
0000754c AM |
1961 | } else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET)) { /* maxCollisions */ |
1962 | do_tx_reset = 1; | |
1963 | reset_mask = 0x0108; /* Reset interface logic, but not download logic */ | |
1964 | } else { /* Merely re-enable the transmitter. */ | |
62afe595 | 1965 | iowrite16(TxEnable, ioaddr + EL3_CMD); |
1da177e4 LT |
1966 | } |
1967 | } | |
1968 | ||
1969 | if (status & RxEarly) { /* Rx early is unused. */ | |
1970 | vortex_rx(dev); | |
62afe595 | 1971 | iowrite16(AckIntr | RxEarly, ioaddr + EL3_CMD); |
1da177e4 LT |
1972 | } |
1973 | if (status & StatsFull) { /* Empty statistics. */ | |
1974 | static int DoneDidThat; | |
1975 | if (vortex_debug > 4) | |
39738e16 | 1976 | pr_debug("%s: Updating stats.\n", dev->name); |
1da177e4 LT |
1977 | update_stats(ioaddr, dev); |
1978 | /* HACK: Disable statistics as an interrupt source. */ | |
1979 | /* This occurs when we have the wrong media type! */ | |
1980 | if (DoneDidThat == 0 && | |
62afe595 | 1981 | ioread16(ioaddr + EL3_STATUS) & StatsFull) { |
39738e16 | 1982 | pr_warning("%s: Updating statistics failed, disabling " |
1da177e4 LT |
1983 | "stats as an interrupt source.\n", dev->name); |
1984 | EL3WINDOW(5); | |
62afe595 | 1985 | iowrite16(SetIntrEnb | (ioread16(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD); |
1da177e4 LT |
1986 | vp->intr_enable &= ~StatsFull; |
1987 | EL3WINDOW(7); | |
1988 | DoneDidThat++; | |
1989 | } | |
1990 | } | |
1991 | if (status & IntReq) { /* Restore all interrupt sources. */ | |
62afe595 JL |
1992 | iowrite16(vp->status_enable, ioaddr + EL3_CMD); |
1993 | iowrite16(vp->intr_enable, ioaddr + EL3_CMD); | |
1da177e4 LT |
1994 | } |
1995 | if (status & HostError) { | |
1996 | u16 fifo_diag; | |
1997 | EL3WINDOW(4); | |
62afe595 | 1998 | fifo_diag = ioread16(ioaddr + Wn4_FIFODiag); |
39738e16 | 1999 | pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n", |
1da177e4 LT |
2000 | dev->name, fifo_diag); |
2001 | /* Adapter failure requires Tx/Rx reset and reinit. */ | |
2002 | if (vp->full_bus_master_tx) { | |
62afe595 | 2003 | int bus_status = ioread32(ioaddr + PktStatus); |
1da177e4 LT |
2004 | /* 0x80000000 PCI master abort. */ |
2005 | /* 0x40000000 PCI target abort. */ | |
2006 | if (vortex_debug) | |
39738e16 | 2007 | pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status); |
1da177e4 LT |
2008 | |
2009 | /* In this case, blow the card away */ | |
2010 | /* Must not enter D3 or we can't legally issue the reset! */ | |
2011 | vortex_down(dev, 0); | |
2012 | issue_and_wait(dev, TotalReset | 0xff); | |
2013 | vortex_up(dev); /* AKPM: bug. vortex_up() assumes that the rx ring is full. It may not be. */ | |
2014 | } else if (fifo_diag & 0x0400) | |
2015 | do_tx_reset = 1; | |
2016 | if (fifo_diag & 0x3000) { | |
2017 | /* Reset Rx fifo and upload logic */ | |
2018 | issue_and_wait(dev, RxReset|0x07); | |
2019 | /* Set the Rx filter to the current state. */ | |
2020 | set_rx_mode(dev); | |
2021 | /* enable 802.1q VLAN tagged frames */ | |
2022 | set_8021q_mode(dev, 1); | |
62afe595 JL |
2023 | iowrite16(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */ |
2024 | iowrite16(AckIntr | HostError, ioaddr + EL3_CMD); | |
1da177e4 LT |
2025 | } |
2026 | } | |
2027 | ||
2028 | if (do_tx_reset) { | |
2029 | issue_and_wait(dev, TxReset|reset_mask); | |
62afe595 | 2030 | iowrite16(TxEnable, ioaddr + EL3_CMD); |
1da177e4 LT |
2031 | if (!vp->full_bus_master_tx) |
2032 | netif_wake_queue(dev); | |
2033 | } | |
2034 | } | |
2035 | ||
27a1de95 | 2036 | static netdev_tx_t |
1da177e4 LT |
2037 | vortex_start_xmit(struct sk_buff *skb, struct net_device *dev) |
2038 | { | |
2039 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2040 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
2041 | |
2042 | /* Put out the doubleword header... */ | |
62afe595 | 2043 | iowrite32(skb->len, ioaddr + TX_FIFO); |
1da177e4 LT |
2044 | if (vp->bus_master) { |
2045 | /* Set the bus-master controller to transfer the packet. */ | |
2046 | int len = (skb->len + 3) & ~3; | |
a880c4cd | 2047 | iowrite32(vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, PCI_DMA_TODEVICE), |
1da177e4 | 2048 | ioaddr + Wn7_MasterAddr); |
62afe595 | 2049 | iowrite16(len, ioaddr + Wn7_MasterLen); |
1da177e4 | 2050 | vp->tx_skb = skb; |
62afe595 | 2051 | iowrite16(StartDMADown, ioaddr + EL3_CMD); |
1da177e4 LT |
2052 | /* netif_wake_queue() will be called at the DMADone interrupt. */ |
2053 | } else { | |
2054 | /* ... and the packet rounded to a doubleword. */ | |
62afe595 | 2055 | iowrite32_rep(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); |
1da177e4 | 2056 | dev_kfree_skb (skb); |
62afe595 | 2057 | if (ioread16(ioaddr + TxFree) > 1536) { |
1da177e4 LT |
2058 | netif_start_queue (dev); /* AKPM: redundant? */ |
2059 | } else { | |
2060 | /* Interrupt us when the FIFO has room for max-sized packet. */ | |
2061 | netif_stop_queue(dev); | |
62afe595 | 2062 | iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); |
1da177e4 LT |
2063 | } |
2064 | } | |
2065 | ||
2066 | dev->trans_start = jiffies; | |
2067 | ||
2068 | /* Clear the Tx status stack. */ | |
2069 | { | |
2070 | int tx_status; | |
2071 | int i = 32; | |
2072 | ||
62afe595 | 2073 | while (--i > 0 && (tx_status = ioread8(ioaddr + TxStatus)) > 0) { |
1da177e4 LT |
2074 | if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */ |
2075 | if (vortex_debug > 2) | |
39738e16 | 2076 | pr_debug("%s: Tx error, status %2.2x.\n", |
1da177e4 | 2077 | dev->name, tx_status); |
1daad055 PZ |
2078 | if (tx_status & 0x04) dev->stats.tx_fifo_errors++; |
2079 | if (tx_status & 0x38) dev->stats.tx_aborted_errors++; | |
1da177e4 LT |
2080 | if (tx_status & 0x30) { |
2081 | issue_and_wait(dev, TxReset); | |
2082 | } | |
62afe595 | 2083 | iowrite16(TxEnable, ioaddr + EL3_CMD); |
1da177e4 | 2084 | } |
62afe595 | 2085 | iowrite8(0x00, ioaddr + TxStatus); /* Pop the status stack. */ |
1da177e4 LT |
2086 | } |
2087 | } | |
6ed10654 | 2088 | return NETDEV_TX_OK; |
1da177e4 LT |
2089 | } |
2090 | ||
27a1de95 | 2091 | static netdev_tx_t |
1da177e4 LT |
2092 | boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) |
2093 | { | |
2094 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2095 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
2096 | /* Calculate the next Tx descriptor entry. */ |
2097 | int entry = vp->cur_tx % TX_RING_SIZE; | |
2098 | struct boom_tx_desc *prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE]; | |
2099 | unsigned long flags; | |
2100 | ||
2101 | if (vortex_debug > 6) { | |
39738e16 AB |
2102 | pr_debug("boomerang_start_xmit()\n"); |
2103 | pr_debug("%s: Trying to send a packet, Tx index %d.\n", | |
0f667ff5 | 2104 | dev->name, vp->cur_tx); |
1da177e4 LT |
2105 | } |
2106 | ||
2107 | if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) { | |
2108 | if (vortex_debug > 0) | |
39738e16 | 2109 | pr_warning("%s: BUG! Tx Ring full, refusing to send buffer.\n", |
1da177e4 LT |
2110 | dev->name); |
2111 | netif_stop_queue(dev); | |
5b548140 | 2112 | return NETDEV_TX_BUSY; |
1da177e4 LT |
2113 | } |
2114 | ||
2115 | vp->tx_skbuff[entry] = skb; | |
2116 | ||
2117 | vp->tx_ring[entry].next = 0; | |
2118 | #if DO_ZEROCOPY | |
84fa7933 | 2119 | if (skb->ip_summed != CHECKSUM_PARTIAL) |
1da177e4 LT |
2120 | vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded); |
2121 | else | |
2122 | vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum); | |
2123 | ||
2124 | if (!skb_shinfo(skb)->nr_frags) { | |
2125 | vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, | |
2126 | skb->len, PCI_DMA_TODEVICE)); | |
2127 | vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len | LAST_FRAG); | |
2128 | } else { | |
2129 | int i; | |
2130 | ||
2131 | vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, | |
2132 | skb->len-skb->data_len, PCI_DMA_TODEVICE)); | |
2133 | vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len-skb->data_len); | |
2134 | ||
2135 | for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
2136 | skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; | |
2137 | ||
2138 | vp->tx_ring[entry].frag[i+1].addr = | |
2139 | cpu_to_le32(pci_map_single(VORTEX_PCI(vp), | |
2140 | (void*)page_address(frag->page) + frag->page_offset, | |
2141 | frag->size, PCI_DMA_TODEVICE)); | |
2142 | ||
2143 | if (i == skb_shinfo(skb)->nr_frags-1) | |
2144 | vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(frag->size|LAST_FRAG); | |
2145 | else | |
2146 | vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(frag->size); | |
2147 | } | |
2148 | } | |
2149 | #else | |
2150 | vp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE)); | |
2151 | vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG); | |
2152 | vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded); | |
2153 | #endif | |
2154 | ||
2155 | spin_lock_irqsave(&vp->lock, flags); | |
2156 | /* Wait for the stall to complete. */ | |
2157 | issue_and_wait(dev, DownStall); | |
2158 | prev_entry->next = cpu_to_le32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc)); | |
62afe595 JL |
2159 | if (ioread32(ioaddr + DownListPtr) == 0) { |
2160 | iowrite32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc), ioaddr + DownListPtr); | |
1da177e4 LT |
2161 | vp->queued_packet++; |
2162 | } | |
2163 | ||
2164 | vp->cur_tx++; | |
2165 | if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1) { | |
2166 | netif_stop_queue (dev); | |
2167 | } else { /* Clear previous interrupt enable. */ | |
2168 | #if defined(tx_interrupt_mitigation) | |
2169 | /* Dubious. If in boomeang_interrupt "faster" cyclone ifdef | |
2170 | * were selected, this would corrupt DN_COMPLETE. No? | |
2171 | */ | |
2172 | prev_entry->status &= cpu_to_le32(~TxIntrUploaded); | |
2173 | #endif | |
2174 | } | |
62afe595 | 2175 | iowrite16(DownUnstall, ioaddr + EL3_CMD); |
1da177e4 LT |
2176 | spin_unlock_irqrestore(&vp->lock, flags); |
2177 | dev->trans_start = jiffies; | |
6ed10654 | 2178 | return NETDEV_TX_OK; |
1da177e4 LT |
2179 | } |
2180 | ||
2181 | /* The interrupt handler does all of the Rx thread work and cleans up | |
2182 | after the Tx thread. */ | |
2183 | ||
2184 | /* | |
2185 | * This is the ISR for the vortex series chips. | |
2186 | * full_bus_master_tx == 0 && full_bus_master_rx == 0 | |
2187 | */ | |
2188 | ||
2189 | static irqreturn_t | |
7d12e780 | 2190 | vortex_interrupt(int irq, void *dev_id) |
1da177e4 LT |
2191 | { |
2192 | struct net_device *dev = dev_id; | |
2193 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2194 | void __iomem *ioaddr; |
1da177e4 LT |
2195 | int status; |
2196 | int work_done = max_interrupt_work; | |
2197 | int handled = 0; | |
2198 | ||
62afe595 | 2199 | ioaddr = vp->ioaddr; |
1da177e4 LT |
2200 | spin_lock(&vp->lock); |
2201 | ||
62afe595 | 2202 | status = ioread16(ioaddr + EL3_STATUS); |
1da177e4 LT |
2203 | |
2204 | if (vortex_debug > 6) | |
39738e16 | 2205 | pr_debug("vortex_interrupt(). status=0x%4x\n", status); |
1da177e4 LT |
2206 | |
2207 | if ((status & IntLatch) == 0) | |
2208 | goto handler_exit; /* No interrupt: shared IRQs cause this */ | |
2209 | handled = 1; | |
2210 | ||
2211 | if (status & IntReq) { | |
2212 | status |= vp->deferred; | |
2213 | vp->deferred = 0; | |
2214 | } | |
2215 | ||
2216 | if (status == 0xffff) /* h/w no longer present (hotplug)? */ | |
2217 | goto handler_exit; | |
2218 | ||
2219 | if (vortex_debug > 4) | |
39738e16 | 2220 | pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n", |
62afe595 | 2221 | dev->name, status, ioread8(ioaddr + Timer)); |
1da177e4 LT |
2222 | |
2223 | do { | |
2224 | if (vortex_debug > 5) | |
39738e16 | 2225 | pr_debug("%s: In interrupt loop, status %4.4x.\n", |
1da177e4 LT |
2226 | dev->name, status); |
2227 | if (status & RxComplete) | |
2228 | vortex_rx(dev); | |
2229 | ||
2230 | if (status & TxAvailable) { | |
2231 | if (vortex_debug > 5) | |
39738e16 | 2232 | pr_debug(" TX room bit was handled.\n"); |
1da177e4 | 2233 | /* There's room in the FIFO for a full-sized packet. */ |
62afe595 | 2234 | iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD); |
1da177e4 LT |
2235 | netif_wake_queue (dev); |
2236 | } | |
2237 | ||
2238 | if (status & DMADone) { | |
62afe595 JL |
2239 | if (ioread16(ioaddr + Wn7_MasterStatus) & 0x1000) { |
2240 | iowrite16(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */ | |
1da177e4 LT |
2241 | pci_unmap_single(VORTEX_PCI(vp), vp->tx_skb_dma, (vp->tx_skb->len + 3) & ~3, PCI_DMA_TODEVICE); |
2242 | dev_kfree_skb_irq(vp->tx_skb); /* Release the transferred buffer */ | |
62afe595 | 2243 | if (ioread16(ioaddr + TxFree) > 1536) { |
1da177e4 LT |
2244 | /* |
2245 | * AKPM: FIXME: I don't think we need this. If the queue was stopped due to | |
2246 | * insufficient FIFO room, the TxAvailable test will succeed and call | |
2247 | * netif_wake_queue() | |
2248 | */ | |
2249 | netif_wake_queue(dev); | |
2250 | } else { /* Interrupt when FIFO has room for max-sized packet. */ | |
62afe595 | 2251 | iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); |
1da177e4 LT |
2252 | netif_stop_queue(dev); |
2253 | } | |
2254 | } | |
2255 | } | |
2256 | /* Check for all uncommon interrupts at once. */ | |
2257 | if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq)) { | |
2258 | if (status == 0xffff) | |
2259 | break; | |
2260 | vortex_error(dev, status); | |
2261 | } | |
2262 | ||
2263 | if (--work_done < 0) { | |
39738e16 AB |
2264 | pr_warning("%s: Too much work in interrupt, status %4.4x.\n", |
2265 | dev->name, status); | |
1da177e4 LT |
2266 | /* Disable all pending interrupts. */ |
2267 | do { | |
2268 | vp->deferred |= status; | |
62afe595 | 2269 | iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable), |
1da177e4 | 2270 | ioaddr + EL3_CMD); |
62afe595 JL |
2271 | iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD); |
2272 | } while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch); | |
1da177e4 LT |
2273 | /* The timer will reenable interrupts. */ |
2274 | mod_timer(&vp->timer, jiffies + 1*HZ); | |
2275 | break; | |
2276 | } | |
2277 | /* Acknowledge the IRQ. */ | |
62afe595 JL |
2278 | iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); |
2279 | } while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete)); | |
1da177e4 LT |
2280 | |
2281 | if (vortex_debug > 4) | |
39738e16 | 2282 | pr_debug("%s: exiting interrupt, status %4.4x.\n", |
1da177e4 LT |
2283 | dev->name, status); |
2284 | handler_exit: | |
2285 | spin_unlock(&vp->lock); | |
2286 | return IRQ_RETVAL(handled); | |
2287 | } | |
2288 | ||
2289 | /* | |
2290 | * This is the ISR for the boomerang series chips. | |
2291 | * full_bus_master_tx == 1 && full_bus_master_rx == 1 | |
2292 | */ | |
2293 | ||
2294 | static irqreturn_t | |
7d12e780 | 2295 | boomerang_interrupt(int irq, void *dev_id) |
1da177e4 LT |
2296 | { |
2297 | struct net_device *dev = dev_id; | |
2298 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2299 | void __iomem *ioaddr; |
1da177e4 LT |
2300 | int status; |
2301 | int work_done = max_interrupt_work; | |
2302 | ||
62afe595 | 2303 | ioaddr = vp->ioaddr; |
1da177e4 LT |
2304 | |
2305 | /* | |
2306 | * It seems dopey to put the spinlock this early, but we could race against vortex_tx_timeout | |
2307 | * and boomerang_start_xmit | |
2308 | */ | |
2309 | spin_lock(&vp->lock); | |
2310 | ||
62afe595 | 2311 | status = ioread16(ioaddr + EL3_STATUS); |
1da177e4 LT |
2312 | |
2313 | if (vortex_debug > 6) | |
39738e16 | 2314 | pr_debug("boomerang_interrupt. status=0x%4x\n", status); |
1da177e4 LT |
2315 | |
2316 | if ((status & IntLatch) == 0) | |
2317 | goto handler_exit; /* No interrupt: shared IRQs can cause this */ | |
2318 | ||
2319 | if (status == 0xffff) { /* h/w no longer present (hotplug)? */ | |
2320 | if (vortex_debug > 1) | |
39738e16 | 2321 | pr_debug("boomerang_interrupt(1): status = 0xffff\n"); |
1da177e4 LT |
2322 | goto handler_exit; |
2323 | } | |
2324 | ||
2325 | if (status & IntReq) { | |
2326 | status |= vp->deferred; | |
2327 | vp->deferred = 0; | |
2328 | } | |
2329 | ||
2330 | if (vortex_debug > 4) | |
39738e16 | 2331 | pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n", |
62afe595 | 2332 | dev->name, status, ioread8(ioaddr + Timer)); |
1da177e4 LT |
2333 | do { |
2334 | if (vortex_debug > 5) | |
39738e16 | 2335 | pr_debug("%s: In interrupt loop, status %4.4x.\n", |
1da177e4 LT |
2336 | dev->name, status); |
2337 | if (status & UpComplete) { | |
62afe595 | 2338 | iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD); |
1da177e4 | 2339 | if (vortex_debug > 5) |
39738e16 | 2340 | pr_debug("boomerang_interrupt->boomerang_rx\n"); |
1da177e4 LT |
2341 | boomerang_rx(dev); |
2342 | } | |
2343 | ||
2344 | if (status & DownComplete) { | |
2345 | unsigned int dirty_tx = vp->dirty_tx; | |
2346 | ||
62afe595 | 2347 | iowrite16(AckIntr | DownComplete, ioaddr + EL3_CMD); |
1da177e4 LT |
2348 | while (vp->cur_tx - dirty_tx > 0) { |
2349 | int entry = dirty_tx % TX_RING_SIZE; | |
2350 | #if 1 /* AKPM: the latter is faster, but cyclone-only */ | |
62afe595 | 2351 | if (ioread32(ioaddr + DownListPtr) == |
1da177e4 LT |
2352 | vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc)) |
2353 | break; /* It still hasn't been processed. */ | |
2354 | #else | |
2355 | if ((vp->tx_ring[entry].status & DN_COMPLETE) == 0) | |
2356 | break; /* It still hasn't been processed. */ | |
2357 | #endif | |
6aa20a22 | 2358 | |
1da177e4 LT |
2359 | if (vp->tx_skbuff[entry]) { |
2360 | struct sk_buff *skb = vp->tx_skbuff[entry]; | |
6aa20a22 | 2361 | #if DO_ZEROCOPY |
1da177e4 LT |
2362 | int i; |
2363 | for (i=0; i<=skb_shinfo(skb)->nr_frags; i++) | |
2364 | pci_unmap_single(VORTEX_PCI(vp), | |
2365 | le32_to_cpu(vp->tx_ring[entry].frag[i].addr), | |
2366 | le32_to_cpu(vp->tx_ring[entry].frag[i].length)&0xFFF, | |
2367 | PCI_DMA_TODEVICE); | |
2368 | #else | |
2369 | pci_unmap_single(VORTEX_PCI(vp), | |
2370 | le32_to_cpu(vp->tx_ring[entry].addr), skb->len, PCI_DMA_TODEVICE); | |
2371 | #endif | |
2372 | dev_kfree_skb_irq(skb); | |
2373 | vp->tx_skbuff[entry] = NULL; | |
2374 | } else { | |
39738e16 | 2375 | pr_debug("boomerang_interrupt: no skb!\n"); |
1da177e4 | 2376 | } |
1daad055 | 2377 | /* dev->stats.tx_packets++; Counted below. */ |
1da177e4 LT |
2378 | dirty_tx++; |
2379 | } | |
2380 | vp->dirty_tx = dirty_tx; | |
2381 | if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) { | |
2382 | if (vortex_debug > 6) | |
39738e16 | 2383 | pr_debug("boomerang_interrupt: wake queue\n"); |
1da177e4 LT |
2384 | netif_wake_queue (dev); |
2385 | } | |
2386 | } | |
2387 | ||
2388 | /* Check for all uncommon interrupts at once. */ | |
2389 | if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq)) | |
2390 | vortex_error(dev, status); | |
2391 | ||
2392 | if (--work_done < 0) { | |
39738e16 AB |
2393 | pr_warning("%s: Too much work in interrupt, status %4.4x.\n", |
2394 | dev->name, status); | |
1da177e4 LT |
2395 | /* Disable all pending interrupts. */ |
2396 | do { | |
2397 | vp->deferred |= status; | |
62afe595 | 2398 | iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable), |
1da177e4 | 2399 | ioaddr + EL3_CMD); |
62afe595 JL |
2400 | iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD); |
2401 | } while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch); | |
1da177e4 LT |
2402 | /* The timer will reenable interrupts. */ |
2403 | mod_timer(&vp->timer, jiffies + 1*HZ); | |
2404 | break; | |
2405 | } | |
2406 | /* Acknowledge the IRQ. */ | |
62afe595 | 2407 | iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); |
1da177e4 | 2408 | if (vp->cb_fn_base) /* The PCMCIA people are idiots. */ |
62afe595 | 2409 | iowrite32(0x8000, vp->cb_fn_base + 4); |
1da177e4 | 2410 | |
62afe595 | 2411 | } while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch); |
1da177e4 LT |
2412 | |
2413 | if (vortex_debug > 4) | |
39738e16 | 2414 | pr_debug("%s: exiting interrupt, status %4.4x.\n", |
1da177e4 LT |
2415 | dev->name, status); |
2416 | handler_exit: | |
2417 | spin_unlock(&vp->lock); | |
2418 | return IRQ_HANDLED; | |
2419 | } | |
2420 | ||
2421 | static int vortex_rx(struct net_device *dev) | |
2422 | { | |
2423 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2424 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
2425 | int i; |
2426 | short rx_status; | |
2427 | ||
2428 | if (vortex_debug > 5) | |
39738e16 | 2429 | pr_debug("vortex_rx(): status %4.4x, rx_status %4.4x.\n", |
62afe595 JL |
2430 | ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus)); |
2431 | while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) { | |
1da177e4 | 2432 | if (rx_status & 0x4000) { /* Error, update stats. */ |
62afe595 | 2433 | unsigned char rx_error = ioread8(ioaddr + RxErrors); |
1da177e4 | 2434 | if (vortex_debug > 2) |
39738e16 | 2435 | pr_debug(" Rx error: status %2.2x.\n", rx_error); |
1daad055 PZ |
2436 | dev->stats.rx_errors++; |
2437 | if (rx_error & 0x01) dev->stats.rx_over_errors++; | |
2438 | if (rx_error & 0x02) dev->stats.rx_length_errors++; | |
2439 | if (rx_error & 0x04) dev->stats.rx_frame_errors++; | |
2440 | if (rx_error & 0x08) dev->stats.rx_crc_errors++; | |
2441 | if (rx_error & 0x10) dev->stats.rx_length_errors++; | |
1da177e4 LT |
2442 | } else { |
2443 | /* The packet length: up to 4.5K!. */ | |
2444 | int pkt_len = rx_status & 0x1fff; | |
2445 | struct sk_buff *skb; | |
2446 | ||
2447 | skb = dev_alloc_skb(pkt_len + 5); | |
2448 | if (vortex_debug > 4) | |
39738e16 | 2449 | pr_debug("Receiving packet size %d status %4.4x.\n", |
1da177e4 LT |
2450 | pkt_len, rx_status); |
2451 | if (skb != NULL) { | |
1da177e4 LT |
2452 | skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ |
2453 | /* 'skb_put()' points to the start of sk_buff data area. */ | |
2454 | if (vp->bus_master && | |
62afe595 | 2455 | ! (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)) { |
1da177e4 LT |
2456 | dma_addr_t dma = pci_map_single(VORTEX_PCI(vp), skb_put(skb, pkt_len), |
2457 | pkt_len, PCI_DMA_FROMDEVICE); | |
62afe595 JL |
2458 | iowrite32(dma, ioaddr + Wn7_MasterAddr); |
2459 | iowrite16((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen); | |
2460 | iowrite16(StartDMAUp, ioaddr + EL3_CMD); | |
2461 | while (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000) | |
1da177e4 LT |
2462 | ; |
2463 | pci_unmap_single(VORTEX_PCI(vp), dma, pkt_len, PCI_DMA_FROMDEVICE); | |
2464 | } else { | |
62afe595 JL |
2465 | ioread32_rep(ioaddr + RX_FIFO, |
2466 | skb_put(skb, pkt_len), | |
2467 | (pkt_len + 3) >> 2); | |
1da177e4 | 2468 | } |
62afe595 | 2469 | iowrite16(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */ |
1da177e4 LT |
2470 | skb->protocol = eth_type_trans(skb, dev); |
2471 | netif_rx(skb); | |
1daad055 | 2472 | dev->stats.rx_packets++; |
1da177e4 LT |
2473 | /* Wait a limited time to go to next packet. */ |
2474 | for (i = 200; i >= 0; i--) | |
62afe595 | 2475 | if ( ! (ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) |
1da177e4 LT |
2476 | break; |
2477 | continue; | |
2478 | } else if (vortex_debug > 0) | |
39738e16 AB |
2479 | pr_notice("%s: No memory to allocate a sk_buff of size %d.\n", |
2480 | dev->name, pkt_len); | |
1daad055 | 2481 | dev->stats.rx_dropped++; |
1da177e4 | 2482 | } |
1da177e4 LT |
2483 | issue_and_wait(dev, RxDiscard); |
2484 | } | |
2485 | ||
2486 | return 0; | |
2487 | } | |
2488 | ||
2489 | static int | |
2490 | boomerang_rx(struct net_device *dev) | |
2491 | { | |
2492 | struct vortex_private *vp = netdev_priv(dev); | |
2493 | int entry = vp->cur_rx % RX_RING_SIZE; | |
62afe595 | 2494 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
2495 | int rx_status; |
2496 | int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx; | |
2497 | ||
2498 | if (vortex_debug > 5) | |
39738e16 | 2499 | pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS)); |
1da177e4 LT |
2500 | |
2501 | while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){ | |
2502 | if (--rx_work_limit < 0) | |
2503 | break; | |
2504 | if (rx_status & RxDError) { /* Error, update stats. */ | |
2505 | unsigned char rx_error = rx_status >> 16; | |
2506 | if (vortex_debug > 2) | |
39738e16 | 2507 | pr_debug(" Rx error: status %2.2x.\n", rx_error); |
1daad055 PZ |
2508 | dev->stats.rx_errors++; |
2509 | if (rx_error & 0x01) dev->stats.rx_over_errors++; | |
2510 | if (rx_error & 0x02) dev->stats.rx_length_errors++; | |
2511 | if (rx_error & 0x04) dev->stats.rx_frame_errors++; | |
2512 | if (rx_error & 0x08) dev->stats.rx_crc_errors++; | |
2513 | if (rx_error & 0x10) dev->stats.rx_length_errors++; | |
1da177e4 LT |
2514 | } else { |
2515 | /* The packet length: up to 4.5K!. */ | |
2516 | int pkt_len = rx_status & 0x1fff; | |
2517 | struct sk_buff *skb; | |
2518 | dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr); | |
2519 | ||
2520 | if (vortex_debug > 4) | |
39738e16 | 2521 | pr_debug("Receiving packet size %d status %4.4x.\n", |
1da177e4 LT |
2522 | pkt_len, rx_status); |
2523 | ||
2524 | /* Check if the packet is long enough to just accept without | |
2525 | copying to a properly sized skbuff. */ | |
cc2d6596 | 2526 | if (pkt_len < rx_copybreak && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { |
1da177e4 LT |
2527 | skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ |
2528 | pci_dma_sync_single_for_cpu(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); | |
2529 | /* 'skb_put()' points to the start of sk_buff data area. */ | |
2530 | memcpy(skb_put(skb, pkt_len), | |
689be439 | 2531 | vp->rx_skbuff[entry]->data, |
1da177e4 LT |
2532 | pkt_len); |
2533 | pci_dma_sync_single_for_device(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); | |
2534 | vp->rx_copy++; | |
2535 | } else { | |
2536 | /* Pass up the skbuff already on the Rx ring. */ | |
2537 | skb = vp->rx_skbuff[entry]; | |
2538 | vp->rx_skbuff[entry] = NULL; | |
2539 | skb_put(skb, pkt_len); | |
2540 | pci_unmap_single(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); | |
2541 | vp->rx_nocopy++; | |
2542 | } | |
2543 | skb->protocol = eth_type_trans(skb, dev); | |
2544 | { /* Use hardware checksum info. */ | |
2545 | int csum_bits = rx_status & 0xee000000; | |
2546 | if (csum_bits && | |
2547 | (csum_bits == (IPChksumValid | TCPChksumValid) || | |
2548 | csum_bits == (IPChksumValid | UDPChksumValid))) { | |
2549 | skb->ip_summed = CHECKSUM_UNNECESSARY; | |
2550 | vp->rx_csumhits++; | |
2551 | } | |
2552 | } | |
2553 | netif_rx(skb); | |
1daad055 | 2554 | dev->stats.rx_packets++; |
1da177e4 LT |
2555 | } |
2556 | entry = (++vp->cur_rx) % RX_RING_SIZE; | |
2557 | } | |
2558 | /* Refill the Rx ring buffers. */ | |
2559 | for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) { | |
2560 | struct sk_buff *skb; | |
2561 | entry = vp->dirty_rx % RX_RING_SIZE; | |
2562 | if (vp->rx_skbuff[entry] == NULL) { | |
89d71a66 | 2563 | skb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ); |
1da177e4 LT |
2564 | if (skb == NULL) { |
2565 | static unsigned long last_jif; | |
ff5688ae | 2566 | if (time_after(jiffies, last_jif + 10 * HZ)) { |
39738e16 | 2567 | pr_warning("%s: memory shortage\n", dev->name); |
1da177e4 LT |
2568 | last_jif = jiffies; |
2569 | } | |
2570 | if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) | |
2571 | mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1)); | |
2572 | break; /* Bad news! */ | |
2573 | } | |
9a5d3414 | 2574 | |
689be439 | 2575 | vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); |
1da177e4 LT |
2576 | vp->rx_skbuff[entry] = skb; |
2577 | } | |
2578 | vp->rx_ring[entry].status = 0; /* Clear complete bit. */ | |
62afe595 | 2579 | iowrite16(UpUnstall, ioaddr + EL3_CMD); |
1da177e4 LT |
2580 | } |
2581 | return 0; | |
2582 | } | |
2583 | ||
2584 | /* | |
2585 | * If we've hit a total OOM refilling the Rx ring we poll once a second | |
2586 | * for some memory. Otherwise there is no way to restart the rx process. | |
2587 | */ | |
2588 | static void | |
2589 | rx_oom_timer(unsigned long arg) | |
2590 | { | |
2591 | struct net_device *dev = (struct net_device *)arg; | |
2592 | struct vortex_private *vp = netdev_priv(dev); | |
2593 | ||
2594 | spin_lock_irq(&vp->lock); | |
2595 | if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) /* This test is redundant, but makes me feel good */ | |
2596 | boomerang_rx(dev); | |
2597 | if (vortex_debug > 1) { | |
39738e16 | 2598 | pr_debug("%s: rx_oom_timer %s\n", dev->name, |
1da177e4 LT |
2599 | ((vp->cur_rx - vp->dirty_rx) != RX_RING_SIZE) ? "succeeded" : "retrying"); |
2600 | } | |
2601 | spin_unlock_irq(&vp->lock); | |
2602 | } | |
2603 | ||
2604 | static void | |
2605 | vortex_down(struct net_device *dev, int final_down) | |
2606 | { | |
2607 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2608 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
2609 | |
2610 | netif_stop_queue (dev); | |
2611 | ||
2612 | del_timer_sync(&vp->rx_oom_timer); | |
2613 | del_timer_sync(&vp->timer); | |
2614 | ||
1daad055 | 2615 | /* Turn off statistics ASAP. We update dev->stats below. */ |
62afe595 | 2616 | iowrite16(StatsDisable, ioaddr + EL3_CMD); |
1da177e4 LT |
2617 | |
2618 | /* Disable the receiver and transmitter. */ | |
62afe595 JL |
2619 | iowrite16(RxDisable, ioaddr + EL3_CMD); |
2620 | iowrite16(TxDisable, ioaddr + EL3_CMD); | |
1da177e4 LT |
2621 | |
2622 | /* Disable receiving 802.1q tagged frames */ | |
2623 | set_8021q_mode(dev, 0); | |
2624 | ||
2625 | if (dev->if_port == XCVR_10base2) | |
2626 | /* Turn off thinnet power. Green! */ | |
62afe595 | 2627 | iowrite16(StopCoax, ioaddr + EL3_CMD); |
1da177e4 | 2628 | |
62afe595 | 2629 | iowrite16(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); |
1da177e4 LT |
2630 | |
2631 | update_stats(ioaddr, dev); | |
2632 | if (vp->full_bus_master_rx) | |
62afe595 | 2633 | iowrite32(0, ioaddr + UpListPtr); |
1da177e4 | 2634 | if (vp->full_bus_master_tx) |
62afe595 | 2635 | iowrite32(0, ioaddr + DownListPtr); |
1da177e4 LT |
2636 | |
2637 | if (final_down && VORTEX_PCI(vp)) { | |
3c8fad18 | 2638 | vp->pm_state_valid = 1; |
1da177e4 LT |
2639 | pci_save_state(VORTEX_PCI(vp)); |
2640 | acpi_set_WOL(dev); | |
2641 | } | |
2642 | } | |
2643 | ||
2644 | static int | |
2645 | vortex_close(struct net_device *dev) | |
2646 | { | |
2647 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2648 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
2649 | int i; |
2650 | ||
2651 | if (netif_device_present(dev)) | |
2652 | vortex_down(dev, 1); | |
2653 | ||
2654 | if (vortex_debug > 1) { | |
39738e16 | 2655 | pr_debug("%s: vortex_close() status %4.4x, Tx status %2.2x.\n", |
62afe595 | 2656 | dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus)); |
39738e16 | 2657 | pr_debug("%s: vortex close stats: rx_nocopy %d rx_copy %d" |
1da177e4 LT |
2658 | " tx_queued %d Rx pre-checksummed %d.\n", |
2659 | dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits); | |
2660 | } | |
2661 | ||
2662 | #if DO_ZEROCOPY | |
32fb5f06 JL |
2663 | if (vp->rx_csumhits && |
2664 | (vp->drv_flags & HAS_HWCKSM) == 0 && | |
2665 | (vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) { | |
39738e16 | 2666 | pr_warning("%s supports hardware checksums, and we're not using them!\n", dev->name); |
1da177e4 LT |
2667 | } |
2668 | #endif | |
6aa20a22 | 2669 | |
1da177e4 LT |
2670 | free_irq(dev->irq, dev); |
2671 | ||
2672 | if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */ | |
2673 | for (i = 0; i < RX_RING_SIZE; i++) | |
2674 | if (vp->rx_skbuff[i]) { | |
2675 | pci_unmap_single( VORTEX_PCI(vp), le32_to_cpu(vp->rx_ring[i].addr), | |
2676 | PKT_BUF_SZ, PCI_DMA_FROMDEVICE); | |
2677 | dev_kfree_skb(vp->rx_skbuff[i]); | |
2678 | vp->rx_skbuff[i] = NULL; | |
2679 | } | |
2680 | } | |
2681 | if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */ | |
2682 | for (i = 0; i < TX_RING_SIZE; i++) { | |
2683 | if (vp->tx_skbuff[i]) { | |
2684 | struct sk_buff *skb = vp->tx_skbuff[i]; | |
2685 | #if DO_ZEROCOPY | |
2686 | int k; | |
2687 | ||
2688 | for (k=0; k<=skb_shinfo(skb)->nr_frags; k++) | |
2689 | pci_unmap_single(VORTEX_PCI(vp), | |
2690 | le32_to_cpu(vp->tx_ring[i].frag[k].addr), | |
2691 | le32_to_cpu(vp->tx_ring[i].frag[k].length)&0xFFF, | |
2692 | PCI_DMA_TODEVICE); | |
2693 | #else | |
2694 | pci_unmap_single(VORTEX_PCI(vp), le32_to_cpu(vp->tx_ring[i].addr), skb->len, PCI_DMA_TODEVICE); | |
2695 | #endif | |
2696 | dev_kfree_skb(skb); | |
2697 | vp->tx_skbuff[i] = NULL; | |
2698 | } | |
2699 | } | |
2700 | } | |
2701 | ||
2702 | return 0; | |
2703 | } | |
2704 | ||
2705 | static void | |
2706 | dump_tx_ring(struct net_device *dev) | |
2707 | { | |
2708 | if (vortex_debug > 0) { | |
2709 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2710 | void __iomem *ioaddr = vp->ioaddr; |
6aa20a22 | 2711 | |
1da177e4 LT |
2712 | if (vp->full_bus_master_tx) { |
2713 | int i; | |
62afe595 | 2714 | int stalled = ioread32(ioaddr + PktStatus) & 0x04; /* Possible racy. But it's only debug stuff */ |
1da177e4 | 2715 | |
39738e16 | 2716 | pr_err(" Flags; bus-master %d, dirty %d(%d) current %d(%d)\n", |
1da177e4 LT |
2717 | vp->full_bus_master_tx, |
2718 | vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE, | |
2719 | vp->cur_tx, vp->cur_tx % TX_RING_SIZE); | |
39738e16 | 2720 | pr_err(" Transmit list %8.8x vs. %p.\n", |
62afe595 | 2721 | ioread32(ioaddr + DownListPtr), |
1da177e4 LT |
2722 | &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]); |
2723 | issue_and_wait(dev, DownStall); | |
2724 | for (i = 0; i < TX_RING_SIZE; i++) { | |
0cb13536 JD |
2725 | unsigned int length; |
2726 | ||
1da177e4 | 2727 | #if DO_ZEROCOPY |
0cb13536 | 2728 | length = le32_to_cpu(vp->tx_ring[i].frag[0].length); |
1da177e4 | 2729 | #else |
0cb13536 | 2730 | length = le32_to_cpu(vp->tx_ring[i].length); |
1da177e4 | 2731 | #endif |
0cb13536 JD |
2732 | pr_err(" %d: @%p length %8.8x status %8.8x\n", |
2733 | i, &vp->tx_ring[i], length, | |
1da177e4 LT |
2734 | le32_to_cpu(vp->tx_ring[i].status)); |
2735 | } | |
2736 | if (!stalled) | |
62afe595 | 2737 | iowrite16(DownUnstall, ioaddr + EL3_CMD); |
1da177e4 LT |
2738 | } |
2739 | } | |
2740 | } | |
2741 | ||
2742 | static struct net_device_stats *vortex_get_stats(struct net_device *dev) | |
2743 | { | |
2744 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2745 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
2746 | unsigned long flags; |
2747 | ||
2748 | if (netif_device_present(dev)) { /* AKPM: Used to be netif_running */ | |
2749 | spin_lock_irqsave (&vp->lock, flags); | |
62afe595 | 2750 | update_stats(ioaddr, dev); |
1da177e4 LT |
2751 | spin_unlock_irqrestore (&vp->lock, flags); |
2752 | } | |
1daad055 | 2753 | return &dev->stats; |
1da177e4 LT |
2754 | } |
2755 | ||
2756 | /* Update statistics. | |
2757 | Unlike with the EL3 we need not worry about interrupts changing | |
2758 | the window setting from underneath us, but we must still guard | |
2759 | against a race condition with a StatsUpdate interrupt updating the | |
2760 | table. This is done by checking that the ASM (!) code generated uses | |
2761 | atomic updates with '+='. | |
2762 | */ | |
62afe595 | 2763 | static void update_stats(void __iomem *ioaddr, struct net_device *dev) |
1da177e4 LT |
2764 | { |
2765 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2766 | int old_window = ioread16(ioaddr + EL3_CMD); |
1da177e4 LT |
2767 | |
2768 | if (old_window == 0xffff) /* Chip suspended or ejected. */ | |
2769 | return; | |
2770 | /* Unlike the 3c5x9 we need not turn off stats updates while reading. */ | |
2771 | /* Switch to the stats window, and read everything. */ | |
2772 | EL3WINDOW(6); | |
1daad055 PZ |
2773 | dev->stats.tx_carrier_errors += ioread8(ioaddr + 0); |
2774 | dev->stats.tx_heartbeat_errors += ioread8(ioaddr + 1); | |
2775 | dev->stats.tx_window_errors += ioread8(ioaddr + 4); | |
2776 | dev->stats.rx_fifo_errors += ioread8(ioaddr + 5); | |
2777 | dev->stats.tx_packets += ioread8(ioaddr + 6); | |
2778 | dev->stats.tx_packets += (ioread8(ioaddr + 9)&0x30) << 4; | |
62afe595 | 2779 | /* Rx packets */ ioread8(ioaddr + 7); /* Must read to clear */ |
1da177e4 LT |
2780 | /* Don't bother with register 9, an extension of registers 6&7. |
2781 | If we do use the 6&7 values the atomic update assumption above | |
2782 | is invalid. */ | |
1daad055 PZ |
2783 | dev->stats.rx_bytes += ioread16(ioaddr + 10); |
2784 | dev->stats.tx_bytes += ioread16(ioaddr + 12); | |
1da177e4 | 2785 | /* Extra stats for get_ethtool_stats() */ |
62afe595 | 2786 | vp->xstats.tx_multiple_collisions += ioread8(ioaddr + 2); |
8d1d0340 | 2787 | vp->xstats.tx_single_collisions += ioread8(ioaddr + 3); |
62afe595 | 2788 | vp->xstats.tx_deferred += ioread8(ioaddr + 8); |
1da177e4 | 2789 | EL3WINDOW(4); |
62afe595 | 2790 | vp->xstats.rx_bad_ssd += ioread8(ioaddr + 12); |
1da177e4 | 2791 | |
1daad055 | 2792 | dev->stats.collisions = vp->xstats.tx_multiple_collisions |
8d1d0340 SK |
2793 | + vp->xstats.tx_single_collisions |
2794 | + vp->xstats.tx_max_collisions; | |
2795 | ||
1da177e4 | 2796 | { |
62afe595 | 2797 | u8 up = ioread8(ioaddr + 13); |
1daad055 PZ |
2798 | dev->stats.rx_bytes += (up & 0x0f) << 16; |
2799 | dev->stats.tx_bytes += (up & 0xf0) << 12; | |
1da177e4 LT |
2800 | } |
2801 | ||
2802 | EL3WINDOW(old_window >> 13); | |
2803 | return; | |
2804 | } | |
2805 | ||
2806 | static int vortex_nway_reset(struct net_device *dev) | |
2807 | { | |
2808 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2809 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
2810 | unsigned long flags; |
2811 | int rc; | |
2812 | ||
2813 | spin_lock_irqsave(&vp->lock, flags); | |
2814 | EL3WINDOW(4); | |
2815 | rc = mii_nway_restart(&vp->mii); | |
2816 | spin_unlock_irqrestore(&vp->lock, flags); | |
2817 | return rc; | |
2818 | } | |
2819 | ||
1da177e4 LT |
2820 | static int vortex_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
2821 | { | |
2822 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2823 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
2824 | unsigned long flags; |
2825 | int rc; | |
2826 | ||
2827 | spin_lock_irqsave(&vp->lock, flags); | |
2828 | EL3WINDOW(4); | |
2829 | rc = mii_ethtool_gset(&vp->mii, cmd); | |
2830 | spin_unlock_irqrestore(&vp->lock, flags); | |
2831 | return rc; | |
2832 | } | |
2833 | ||
2834 | static int vortex_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | |
2835 | { | |
2836 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2837 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
2838 | unsigned long flags; |
2839 | int rc; | |
2840 | ||
2841 | spin_lock_irqsave(&vp->lock, flags); | |
2842 | EL3WINDOW(4); | |
2843 | rc = mii_ethtool_sset(&vp->mii, cmd); | |
2844 | spin_unlock_irqrestore(&vp->lock, flags); | |
2845 | return rc; | |
2846 | } | |
2847 | ||
2848 | static u32 vortex_get_msglevel(struct net_device *dev) | |
2849 | { | |
2850 | return vortex_debug; | |
2851 | } | |
2852 | ||
2853 | static void vortex_set_msglevel(struct net_device *dev, u32 dbg) | |
2854 | { | |
2855 | vortex_debug = dbg; | |
2856 | } | |
2857 | ||
b9f2c044 | 2858 | static int vortex_get_sset_count(struct net_device *dev, int sset) |
1da177e4 | 2859 | { |
b9f2c044 JG |
2860 | switch (sset) { |
2861 | case ETH_SS_STATS: | |
2862 | return VORTEX_NUM_STATS; | |
2863 | default: | |
2864 | return -EOPNOTSUPP; | |
2865 | } | |
1da177e4 LT |
2866 | } |
2867 | ||
2868 | static void vortex_get_ethtool_stats(struct net_device *dev, | |
2869 | struct ethtool_stats *stats, u64 *data) | |
2870 | { | |
2871 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2872 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 LT |
2873 | unsigned long flags; |
2874 | ||
2875 | spin_lock_irqsave(&vp->lock, flags); | |
62afe595 | 2876 | update_stats(ioaddr, dev); |
1da177e4 LT |
2877 | spin_unlock_irqrestore(&vp->lock, flags); |
2878 | ||
2879 | data[0] = vp->xstats.tx_deferred; | |
8d1d0340 SK |
2880 | data[1] = vp->xstats.tx_max_collisions; |
2881 | data[2] = vp->xstats.tx_multiple_collisions; | |
2882 | data[3] = vp->xstats.tx_single_collisions; | |
2883 | data[4] = vp->xstats.rx_bad_ssd; | |
1da177e4 LT |
2884 | } |
2885 | ||
2886 | ||
2887 | static void vortex_get_strings(struct net_device *dev, u32 stringset, u8 *data) | |
2888 | { | |
2889 | switch (stringset) { | |
2890 | case ETH_SS_STATS: | |
2891 | memcpy(data, ðtool_stats_keys, sizeof(ethtool_stats_keys)); | |
2892 | break; | |
2893 | default: | |
2894 | WARN_ON(1); | |
2895 | break; | |
2896 | } | |
2897 | } | |
2898 | ||
2899 | static void vortex_get_drvinfo(struct net_device *dev, | |
2900 | struct ethtool_drvinfo *info) | |
2901 | { | |
2902 | struct vortex_private *vp = netdev_priv(dev); | |
2903 | ||
2904 | strcpy(info->driver, DRV_NAME); | |
1da177e4 LT |
2905 | if (VORTEX_PCI(vp)) { |
2906 | strcpy(info->bus_info, pci_name(VORTEX_PCI(vp))); | |
2907 | } else { | |
2908 | if (VORTEX_EISA(vp)) | |
86de79b6 | 2909 | strcpy(info->bus_info, dev_name(vp->gendev)); |
1da177e4 LT |
2910 | else |
2911 | sprintf(info->bus_info, "EISA 0x%lx %d", | |
2912 | dev->base_addr, dev->irq); | |
2913 | } | |
2914 | } | |
2915 | ||
7282d491 | 2916 | static const struct ethtool_ops vortex_ethtool_ops = { |
1da177e4 LT |
2917 | .get_drvinfo = vortex_get_drvinfo, |
2918 | .get_strings = vortex_get_strings, | |
2919 | .get_msglevel = vortex_get_msglevel, | |
2920 | .set_msglevel = vortex_set_msglevel, | |
2921 | .get_ethtool_stats = vortex_get_ethtool_stats, | |
b9f2c044 | 2922 | .get_sset_count = vortex_get_sset_count, |
1da177e4 LT |
2923 | .get_settings = vortex_get_settings, |
2924 | .set_settings = vortex_set_settings, | |
373a6887 | 2925 | .get_link = ethtool_op_get_link, |
1da177e4 LT |
2926 | .nway_reset = vortex_nway_reset, |
2927 | }; | |
2928 | ||
2929 | #ifdef CONFIG_PCI | |
2930 | /* | |
2931 | * Must power the device up to do MDIO operations | |
2932 | */ | |
2933 | static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | |
2934 | { | |
2935 | int err; | |
2936 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 2937 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 | 2938 | unsigned long flags; |
cc2d6596 | 2939 | pci_power_t state = 0; |
1da177e4 LT |
2940 | |
2941 | if(VORTEX_PCI(vp)) | |
2942 | state = VORTEX_PCI(vp)->current_state; | |
2943 | ||
2944 | /* The kernel core really should have pci_get_power_state() */ | |
2945 | ||
2946 | if(state != 0) | |
2947 | pci_set_power_state(VORTEX_PCI(vp), PCI_D0); | |
2948 | spin_lock_irqsave(&vp->lock, flags); | |
2949 | EL3WINDOW(4); | |
2950 | err = generic_mii_ioctl(&vp->mii, if_mii(rq), cmd, NULL); | |
2951 | spin_unlock_irqrestore(&vp->lock, flags); | |
2952 | if(state != 0) | |
2953 | pci_set_power_state(VORTEX_PCI(vp), state); | |
2954 | ||
2955 | return err; | |
2956 | } | |
2957 | #endif | |
2958 | ||
2959 | ||
2960 | /* Pre-Cyclone chips have no documented multicast filter, so the only | |
2961 | multicast setting is to receive all multicast frames. At least | |
2962 | the chip has a very clean way to set the mode, unlike many others. */ | |
2963 | static void set_rx_mode(struct net_device *dev) | |
2964 | { | |
62afe595 JL |
2965 | struct vortex_private *vp = netdev_priv(dev); |
2966 | void __iomem *ioaddr = vp->ioaddr; | |
1da177e4 LT |
2967 | int new_mode; |
2968 | ||
2969 | if (dev->flags & IFF_PROMISC) { | |
d5b20697 | 2970 | if (vortex_debug > 3) |
39738e16 | 2971 | pr_notice("%s: Setting promiscuous mode.\n", dev->name); |
1da177e4 LT |
2972 | new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm; |
2973 | } else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) { | |
2974 | new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast; | |
2975 | } else | |
2976 | new_mode = SetRxFilter | RxStation | RxBroadcast; | |
2977 | ||
62afe595 | 2978 | iowrite16(new_mode, ioaddr + EL3_CMD); |
1da177e4 LT |
2979 | } |
2980 | ||
2981 | #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) | |
2982 | /* Setup the card so that it can receive frames with an 802.1q VLAN tag. | |
2983 | Note that this must be done after each RxReset due to some backwards | |
2984 | compatibility logic in the Cyclone and Tornado ASICs */ | |
2985 | ||
2986 | /* The Ethernet Type used for 802.1q tagged frames */ | |
2987 | #define VLAN_ETHER_TYPE 0x8100 | |
2988 | ||
2989 | static void set_8021q_mode(struct net_device *dev, int enable) | |
2990 | { | |
2991 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 JL |
2992 | void __iomem *ioaddr = vp->ioaddr; |
2993 | int old_window = ioread16(ioaddr + EL3_CMD); | |
1da177e4 LT |
2994 | int mac_ctrl; |
2995 | ||
2996 | if ((vp->drv_flags&IS_CYCLONE) || (vp->drv_flags&IS_TORNADO)) { | |
2997 | /* cyclone and tornado chipsets can recognize 802.1q | |
2998 | * tagged frames and treat them correctly */ | |
2999 | ||
3000 | int max_pkt_size = dev->mtu+14; /* MTU+Ethernet header */ | |
3001 | if (enable) | |
3002 | max_pkt_size += 4; /* 802.1Q VLAN tag */ | |
3003 | ||
3004 | EL3WINDOW(3); | |
62afe595 | 3005 | iowrite16(max_pkt_size, ioaddr+Wn3_MaxPktSize); |
1da177e4 LT |
3006 | |
3007 | /* set VlanEtherType to let the hardware checksumming | |
3008 | treat tagged frames correctly */ | |
3009 | EL3WINDOW(7); | |
62afe595 | 3010 | iowrite16(VLAN_ETHER_TYPE, ioaddr+Wn7_VlanEtherType); |
1da177e4 LT |
3011 | } else { |
3012 | /* on older cards we have to enable large frames */ | |
3013 | ||
3014 | vp->large_frames = dev->mtu > 1500 || enable; | |
3015 | ||
3016 | EL3WINDOW(3); | |
62afe595 | 3017 | mac_ctrl = ioread16(ioaddr+Wn3_MAC_Ctrl); |
1da177e4 LT |
3018 | if (vp->large_frames) |
3019 | mac_ctrl |= 0x40; | |
3020 | else | |
3021 | mac_ctrl &= ~0x40; | |
62afe595 | 3022 | iowrite16(mac_ctrl, ioaddr+Wn3_MAC_Ctrl); |
1da177e4 LT |
3023 | } |
3024 | ||
3025 | EL3WINDOW(old_window); | |
3026 | } | |
3027 | #else | |
3028 | ||
3029 | static void set_8021q_mode(struct net_device *dev, int enable) | |
3030 | { | |
3031 | } | |
3032 | ||
3033 | ||
3034 | #endif | |
3035 | ||
3036 | /* MII transceiver control section. | |
3037 | Read and write the MII registers using software-generated serial | |
3038 | MDIO protocol. See the MII specifications or DP83840A data sheet | |
3039 | for details. */ | |
3040 | ||
3041 | /* The maximum data clock rate is 2.5 Mhz. The minimum timing is usually | |
3042 | met by back-to-back PCI I/O cycles, but we insert a delay to avoid | |
3043 | "overclocking" issues. */ | |
62afe595 | 3044 | #define mdio_delay() ioread32(mdio_addr) |
1da177e4 LT |
3045 | |
3046 | #define MDIO_SHIFT_CLK 0x01 | |
3047 | #define MDIO_DIR_WRITE 0x04 | |
3048 | #define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE) | |
3049 | #define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE) | |
3050 | #define MDIO_DATA_READ 0x02 | |
3051 | #define MDIO_ENB_IN 0x00 | |
3052 | ||
3053 | /* Generate the preamble required for initial synchronization and | |
3054 | a few older transceivers. */ | |
62afe595 | 3055 | static void mdio_sync(void __iomem *ioaddr, int bits) |
1da177e4 | 3056 | { |
62afe595 | 3057 | void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt; |
1da177e4 LT |
3058 | |
3059 | /* Establish sync by sending at least 32 logic ones. */ | |
3060 | while (-- bits >= 0) { | |
62afe595 | 3061 | iowrite16(MDIO_DATA_WRITE1, mdio_addr); |
1da177e4 | 3062 | mdio_delay(); |
62afe595 | 3063 | iowrite16(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); |
1da177e4 LT |
3064 | mdio_delay(); |
3065 | } | |
3066 | } | |
3067 | ||
3068 | static int mdio_read(struct net_device *dev, int phy_id, int location) | |
3069 | { | |
3070 | int i; | |
62afe595 JL |
3071 | struct vortex_private *vp = netdev_priv(dev); |
3072 | void __iomem *ioaddr = vp->ioaddr; | |
1da177e4 LT |
3073 | int read_cmd = (0xf6 << 10) | (phy_id << 5) | location; |
3074 | unsigned int retval = 0; | |
62afe595 | 3075 | void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt; |
1da177e4 LT |
3076 | |
3077 | if (mii_preamble_required) | |
3078 | mdio_sync(ioaddr, 32); | |
3079 | ||
3080 | /* Shift the read command bits out. */ | |
3081 | for (i = 14; i >= 0; i--) { | |
3082 | int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; | |
62afe595 | 3083 | iowrite16(dataval, mdio_addr); |
1da177e4 | 3084 | mdio_delay(); |
62afe595 | 3085 | iowrite16(dataval | MDIO_SHIFT_CLK, mdio_addr); |
1da177e4 LT |
3086 | mdio_delay(); |
3087 | } | |
3088 | /* Read the two transition, 16 data, and wire-idle bits. */ | |
3089 | for (i = 19; i > 0; i--) { | |
62afe595 | 3090 | iowrite16(MDIO_ENB_IN, mdio_addr); |
1da177e4 | 3091 | mdio_delay(); |
62afe595 JL |
3092 | retval = (retval << 1) | ((ioread16(mdio_addr) & MDIO_DATA_READ) ? 1 : 0); |
3093 | iowrite16(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); | |
1da177e4 LT |
3094 | mdio_delay(); |
3095 | } | |
3096 | return retval & 0x20000 ? 0xffff : retval>>1 & 0xffff; | |
3097 | } | |
3098 | ||
3099 | static void mdio_write(struct net_device *dev, int phy_id, int location, int value) | |
3100 | { | |
62afe595 JL |
3101 | struct vortex_private *vp = netdev_priv(dev); |
3102 | void __iomem *ioaddr = vp->ioaddr; | |
1da177e4 | 3103 | int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value; |
62afe595 | 3104 | void __iomem *mdio_addr = ioaddr + Wn4_PhysicalMgmt; |
1da177e4 LT |
3105 | int i; |
3106 | ||
3107 | if (mii_preamble_required) | |
3108 | mdio_sync(ioaddr, 32); | |
3109 | ||
3110 | /* Shift the command bits out. */ | |
3111 | for (i = 31; i >= 0; i--) { | |
3112 | int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; | |
62afe595 | 3113 | iowrite16(dataval, mdio_addr); |
1da177e4 | 3114 | mdio_delay(); |
62afe595 | 3115 | iowrite16(dataval | MDIO_SHIFT_CLK, mdio_addr); |
1da177e4 LT |
3116 | mdio_delay(); |
3117 | } | |
3118 | /* Leave the interface idle. */ | |
3119 | for (i = 1; i >= 0; i--) { | |
62afe595 | 3120 | iowrite16(MDIO_ENB_IN, mdio_addr); |
1da177e4 | 3121 | mdio_delay(); |
62afe595 | 3122 | iowrite16(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); |
1da177e4 LT |
3123 | mdio_delay(); |
3124 | } | |
3125 | return; | |
3126 | } | |
a880c4cd | 3127 | |
1da177e4 LT |
3128 | /* ACPI: Advanced Configuration and Power Interface. */ |
3129 | /* Set Wake-On-LAN mode and put the board into D3 (power-down) state. */ | |
3130 | static void acpi_set_WOL(struct net_device *dev) | |
3131 | { | |
3132 | struct vortex_private *vp = netdev_priv(dev); | |
62afe595 | 3133 | void __iomem *ioaddr = vp->ioaddr; |
1da177e4 | 3134 | |
c17931c5 SK |
3135 | device_set_wakeup_enable(vp->gendev, vp->enable_wol); |
3136 | ||
1da177e4 LT |
3137 | if (vp->enable_wol) { |
3138 | /* Power up on: 1==Downloaded Filter, 2==Magic Packets, 4==Link Status. */ | |
3139 | EL3WINDOW(7); | |
62afe595 | 3140 | iowrite16(2, ioaddr + 0x0c); |
1da177e4 | 3141 | /* The RxFilter must accept the WOL frames. */ |
62afe595 JL |
3142 | iowrite16(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD); |
3143 | iowrite16(RxEnable, ioaddr + EL3_CMD); | |
1da177e4 | 3144 | |
1a1769f3 | 3145 | if (pci_enable_wake(VORTEX_PCI(vp), PCI_D3hot, 1)) { |
39738e16 | 3146 | pr_info("%s: WOL not supported.\n", pci_name(VORTEX_PCI(vp))); |
1a1769f3 SK |
3147 | |
3148 | vp->enable_wol = 0; | |
3149 | return; | |
3150 | } | |
3c8fad18 DR |
3151 | |
3152 | /* Change the power state to D3; RxEnable doesn't take effect. */ | |
3153 | pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot); | |
1da177e4 | 3154 | } |
1da177e4 LT |
3155 | } |
3156 | ||
3157 | ||
a880c4cd | 3158 | static void __devexit vortex_remove_one(struct pci_dev *pdev) |
1da177e4 LT |
3159 | { |
3160 | struct net_device *dev = pci_get_drvdata(pdev); | |
3161 | struct vortex_private *vp; | |
3162 | ||
3163 | if (!dev) { | |
39738e16 | 3164 | pr_err("vortex_remove_one called for Compaq device!\n"); |
1da177e4 LT |
3165 | BUG(); |
3166 | } | |
3167 | ||
3168 | vp = netdev_priv(dev); | |
3169 | ||
62afe595 JL |
3170 | if (vp->cb_fn_base) |
3171 | pci_iounmap(VORTEX_PCI(vp), vp->cb_fn_base); | |
3172 | ||
1da177e4 LT |
3173 | unregister_netdev(dev); |
3174 | ||
3175 | if (VORTEX_PCI(vp)) { | |
3176 | pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */ | |
3177 | if (vp->pm_state_valid) | |
3178 | pci_restore_state(VORTEX_PCI(vp)); | |
3179 | pci_disable_device(VORTEX_PCI(vp)); | |
3180 | } | |
3181 | /* Should really use issue_and_wait() here */ | |
62afe595 JL |
3182 | iowrite16(TotalReset | ((vp->drv_flags & EEPROM_RESET) ? 0x04 : 0x14), |
3183 | vp->ioaddr + EL3_CMD); | |
3184 | ||
3185 | pci_iounmap(VORTEX_PCI(vp), vp->ioaddr); | |
1da177e4 LT |
3186 | |
3187 | pci_free_consistent(pdev, | |
3188 | sizeof(struct boom_rx_desc) * RX_RING_SIZE | |
3189 | + sizeof(struct boom_tx_desc) * TX_RING_SIZE, | |
3190 | vp->rx_ring, | |
3191 | vp->rx_ring_dma); | |
3192 | if (vp->must_free_region) | |
3193 | release_region(dev->base_addr, vp->io_size); | |
3194 | free_netdev(dev); | |
3195 | } | |
3196 | ||
3197 | ||
3198 | static struct pci_driver vortex_driver = { | |
3199 | .name = "3c59x", | |
3200 | .probe = vortex_init_one, | |
3201 | .remove = __devexit_p(vortex_remove_one), | |
3202 | .id_table = vortex_pci_tbl, | |
7bfc4ab5 | 3203 | .driver.pm = VORTEX_PM_OPS, |
1da177e4 LT |
3204 | }; |
3205 | ||
3206 | ||
3207 | static int vortex_have_pci; | |
3208 | static int vortex_have_eisa; | |
3209 | ||
3210 | ||
a880c4cd | 3211 | static int __init vortex_init(void) |
1da177e4 LT |
3212 | { |
3213 | int pci_rc, eisa_rc; | |
3214 | ||
29917620 | 3215 | pci_rc = pci_register_driver(&vortex_driver); |
1da177e4 LT |
3216 | eisa_rc = vortex_eisa_init(); |
3217 | ||
3218 | if (pci_rc == 0) | |
3219 | vortex_have_pci = 1; | |
3220 | if (eisa_rc > 0) | |
3221 | vortex_have_eisa = 1; | |
3222 | ||
3223 | return (vortex_have_pci + vortex_have_eisa) ? 0 : -ENODEV; | |
3224 | } | |
3225 | ||
3226 | ||
a880c4cd | 3227 | static void __exit vortex_eisa_cleanup(void) |
1da177e4 LT |
3228 | { |
3229 | struct vortex_private *vp; | |
62afe595 | 3230 | void __iomem *ioaddr; |
1da177e4 LT |
3231 | |
3232 | #ifdef CONFIG_EISA | |
3233 | /* Take care of the EISA devices */ | |
a880c4cd | 3234 | eisa_driver_unregister(&vortex_eisa_driver); |
1da177e4 | 3235 | #endif |
6aa20a22 | 3236 | |
1da177e4 | 3237 | if (compaq_net_device) { |
454d7c9b | 3238 | vp = netdev_priv(compaq_net_device); |
62afe595 JL |
3239 | ioaddr = ioport_map(compaq_net_device->base_addr, |
3240 | VORTEX_TOTAL_SIZE); | |
1da177e4 | 3241 | |
a880c4cd SK |
3242 | unregister_netdev(compaq_net_device); |
3243 | iowrite16(TotalReset, ioaddr + EL3_CMD); | |
62afe595 JL |
3244 | release_region(compaq_net_device->base_addr, |
3245 | VORTEX_TOTAL_SIZE); | |
1da177e4 | 3246 | |
a880c4cd | 3247 | free_netdev(compaq_net_device); |
1da177e4 LT |
3248 | } |
3249 | } | |
3250 | ||
3251 | ||
a880c4cd | 3252 | static void __exit vortex_cleanup(void) |
1da177e4 LT |
3253 | { |
3254 | if (vortex_have_pci) | |
a880c4cd | 3255 | pci_unregister_driver(&vortex_driver); |
1da177e4 | 3256 | if (vortex_have_eisa) |
a880c4cd | 3257 | vortex_eisa_cleanup(); |
1da177e4 LT |
3258 | } |
3259 | ||
3260 | ||
3261 | module_init(vortex_init); | |
3262 | module_exit(vortex_cleanup); |