]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | |
2 | # | |
3 | # Network device configuration | |
4 | # | |
5 | ||
d5950b43 | 6 | menu "Network device support" |
6967bd81 | 7 | depends on NET |
d5950b43 | 8 | |
1da177e4 | 9 | config NETDEVICES |
ce2d2aed | 10 | default y if UML |
1da177e4 LT |
11 | bool "Network device support" |
12 | ---help--- | |
13 | You can say N here if you don't intend to connect your Linux box to | |
14 | any other computer at all. | |
15 | ||
16 | You'll have to say Y if your computer contains a network card that | |
17 | you want to use under Linux. If you are going to run SLIP or PPP over | |
18 | telephone line or null modem cable you need say Y here. Connecting | |
19 | two machines with parallel ports using PLIP needs this, as well as | |
20 | AX.25/KISS for sending Internet traffic over amateur radio links. | |
21 | ||
22 | See also "The Linux Network Administrator's Guide" by Olaf Kirch and | |
23 | Terry Dawson. Available at <http://www.tldp.org/guides.html>. | |
24 | ||
25 | If unsure, say Y. | |
26 | ||
cbcd2a4c | 27 | |
253af423 JHS |
28 | config IFB |
29 | tristate "Intermediate Functional Block support" | |
30 | depends on NET_CLS_ACT | |
31 | ---help--- | |
32 | This is an intermidiate driver that allows sharing of | |
33 | resources. | |
34 | To compile this driver as a module, choose M here: the module | |
35 | will be called ifb. If you want to use more than one ifb | |
36 | device at a time, you need to compile this driver as a module. | |
37 | Instead of 'ifb', the devices will then be called 'ifb0', | |
38 | 'ifb1' etc. | |
39 | Look at the iproute2 documentation directory for usage etc | |
40 | ||
1da177e4 LT |
41 | config DUMMY |
42 | tristate "Dummy net driver support" | |
1da177e4 LT |
43 | ---help--- |
44 | This is essentially a bit-bucket device (i.e. traffic you send to | |
45 | this device is consigned into oblivion) with a configurable IP | |
46 | address. It is most commonly used in order to make your currently | |
47 | inactive SLIP address seem like a real address for local programs. | |
48 | If you use SLIP or PPP, you might want to say Y here. Since this | |
49 | thing often comes in handy, the default is Y. It won't enlarge your | |
50 | kernel either. What a deal. Read about it in the Network | |
51 | Administrator's Guide, available from | |
52 | <http://www.tldp.org/docs.html#guide>. | |
53 | ||
54 | To compile this driver as a module, choose M here: the module | |
55 | will be called dummy. If you want to use more than one dummy | |
56 | device at a time, you need to compile this driver as a module. | |
57 | Instead of 'dummy', the devices will then be called 'dummy0', | |
58 | 'dummy1' etc. | |
59 | ||
60 | config BONDING | |
61 | tristate "Bonding driver support" | |
1da177e4 LT |
62 | depends on INET |
63 | ---help--- | |
64 | Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet | |
65 | Channels together. This is called 'Etherchannel' by Cisco, | |
66 | 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux. | |
67 | ||
68 | The driver supports multiple bonding modes to allow for both high | |
69 | perfomance and high availability operation. | |
70 | ||
71 | Refer to <file:Documentation/networking/bonding.txt> for more | |
72 | information. | |
73 | ||
74 | To compile this driver as a module, choose M here: the module | |
75 | will be called bonding. | |
76 | ||
77 | config EQUALIZER | |
78 | tristate "EQL (serial line load balancing) support" | |
1da177e4 LT |
79 | ---help--- |
80 | If you have two serial connections to some other computer (this | |
81 | usually requires two modems and two telephone lines) and you use | |
82 | SLIP (the protocol for sending Internet traffic over telephone | |
83 | lines) or PPP (a better SLIP) on them, you can make them behave like | |
84 | one double speed connection using this driver. Naturally, this has | |
85 | to be supported at the other end as well, either with a similar EQL | |
86 | Linux driver or with a Livingston Portmaster 2e. | |
87 | ||
88 | Say Y if you want this and read | |
89 | <file:Documentation/networking/eql.txt>. You may also want to read | |
90 | section 6.2 of the NET-3-HOWTO, available from | |
91 | <http://www.tldp.org/docs.html#howto>. | |
92 | ||
93 | To compile this driver as a module, choose M here: the module | |
94 | will be called eql. If unsure, say N. | |
95 | ||
96 | config TUN | |
97 | tristate "Universal TUN/TAP device driver support" | |
1da177e4 LT |
98 | select CRC32 |
99 | ---help--- | |
100 | TUN/TAP provides packet reception and transmission for user space | |
101 | programs. It can be viewed as a simple Point-to-Point or Ethernet | |
102 | device, which instead of receiving packets from a physical media, | |
103 | receives them from user space program and instead of sending packets | |
104 | via physical media writes them to the user space program. | |
105 | ||
106 | When a program opens /dev/net/tun, driver creates and registers | |
107 | corresponding net device tunX or tapX. After a program closed above | |
108 | devices, driver will automatically delete tunXX or tapXX device and | |
109 | all routes corresponding to it. | |
110 | ||
111 | Please read <file:Documentation/networking/tuntap.txt> for more | |
112 | information. | |
113 | ||
114 | To compile this driver as a module, choose M here: the module | |
115 | will be called tun. | |
116 | ||
117 | If you don't know what to use this for, you don't need it. | |
118 | ||
119 | config NET_SB1000 | |
120 | tristate "General Instruments Surfboard 1000" | |
cbcd2a4c | 121 | depends on PNP |
1da177e4 LT |
122 | ---help--- |
123 | This is a driver for the General Instrument (also known as | |
124 | NextLevel) SURFboard 1000 internal | |
125 | cable modem. This is an ISA card which is used by a number of cable | |
126 | TV companies to provide cable modem access. It's a one-way | |
127 | downstream-only cable modem, meaning that your upstream net link is | |
128 | provided by your regular phone modem. | |
129 | ||
130 | At present this driver only compiles as a module, so say M here if | |
131 | you have this card. The module will be called sb1000. Then read | |
132 | <file:Documentation/networking/README.sb1000> for information on how | |
133 | to use this module, as it needs special ppp scripts for establishing | |
134 | a connection. Further documentation and the necessary scripts can be | |
135 | found at: | |
136 | ||
137 | <http://www.jacksonville.net/~fventuri/> | |
138 | <http://home.adelphia.net/~siglercm/sb1000.html> | |
139 | <http://linuxpower.cx/~cable/> | |
140 | ||
141 | If you don't have this card, of course say N. | |
142 | ||
f65fd8fb | 143 | source "drivers/net/arcnet/Kconfig" |
1da177e4 | 144 | |
00db8189 AF |
145 | source "drivers/net/phy/Kconfig" |
146 | ||
1da177e4 LT |
147 | # |
148 | # Ethernet | |
149 | # | |
150 | ||
151 | menu "Ethernet (10 or 100Mbit)" | |
cbcd2a4c | 152 | depends on !UML |
1da177e4 LT |
153 | |
154 | config NET_ETHERNET | |
155 | bool "Ethernet (10 or 100Mbit)" | |
156 | ---help--- | |
157 | Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common | |
158 | type of Local Area Network (LAN) in universities and companies. | |
159 | ||
160 | Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over | |
161 | coaxial cable, linking computers in a chain), 10BASE-T or twisted | |
162 | pair (10 Mbps over twisted pair cable, linking computers to central | |
163 | hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs), | |
164 | 100BASE-TX (100 Mbps over two twisted pair cables, using hubs), | |
165 | 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair | |
166 | cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links) | |
167 | [the 100BASE varieties are also known as Fast Ethernet], and Gigabit | |
168 | Ethernet (1 Gbps over optical fiber or short copper links). | |
169 | ||
170 | If your Linux machine will be connected to an Ethernet and you have | |
171 | an Ethernet network interface card (NIC) installed in your computer, | |
172 | say Y here and read the Ethernet-HOWTO, available from | |
173 | <http://www.tldp.org/docs.html#howto>. You will then also have | |
174 | to say Y to the driver for your particular NIC. | |
175 | ||
176 | Note that the answer to this question won't directly affect the | |
177 | kernel: saying N will just cause the configurator to skip all | |
178 | the questions about Ethernet network cards. If unsure, say N. | |
179 | ||
180 | config MII | |
181 | tristate "Generic Media Independent Interface device support" | |
182 | depends on NET_ETHERNET | |
183 | help | |
184 | Most ethernet controllers have MII transceiver either as an external | |
185 | or internal device. It is safe to say Y or M here even if your | |
186 | ethernet card lack MII. | |
187 | ||
188 | source "drivers/net/arm/Kconfig" | |
189 | ||
190 | config MACE | |
191 | tristate "MACE (Power Mac ethernet) support" | |
192 | depends on NET_ETHERNET && PPC_PMAC && PPC32 | |
193 | select CRC32 | |
194 | help | |
195 | Power Macintoshes and clones with Ethernet built-in on the | |
196 | motherboard will usually use a MACE (Medium Access Control for | |
197 | Ethernet) interface. Say Y to include support for the MACE chip. | |
198 | ||
199 | To compile this driver as a module, choose M here: the module | |
200 | will be called mace. | |
201 | ||
202 | config MACE_AAUI_PORT | |
203 | bool "Use AAUI port instead of TP by default" | |
204 | depends on MACE | |
205 | help | |
206 | Some Apple machines (notably the Apple Network Server) which use the | |
207 | MACE ethernet chip have an Apple AUI port (small 15-pin connector), | |
208 | instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say | |
209 | Y here if you have such a machine. If unsure, say N. | |
210 | The driver will default to AAUI on ANS anyway, and if you use it as | |
211 | a module, you can provide the port_aaui=0|1 to force the driver. | |
212 | ||
213 | config BMAC | |
214 | tristate "BMAC (G3 ethernet) support" | |
215 | depends on NET_ETHERNET && PPC_PMAC && PPC32 | |
216 | select CRC32 | |
217 | help | |
218 | Say Y for support of BMAC Ethernet interfaces. These are used on G3 | |
219 | computers. | |
220 | ||
221 | To compile this driver as a module, choose M here: the module | |
222 | will be called bmac. | |
223 | ||
224 | config OAKNET | |
225 | tristate "National DP83902AV (Oak ethernet) support" | |
226 | depends on NET_ETHERNET && PPC && BROKEN | |
227 | select CRC32 | |
228 | help | |
229 | Say Y if your machine has this type of Ethernet network card. | |
230 | ||
231 | To compile this driver as a module, choose M here: the module | |
232 | will be called oaknet. | |
233 | ||
234 | config ARIADNE | |
235 | tristate "Ariadne support" | |
236 | depends on NET_ETHERNET && ZORRO | |
237 | help | |
238 | If you have a Village Tronic Ariadne Ethernet adapter, say Y. | |
239 | Otherwise, say N. | |
240 | ||
241 | To compile this driver as a module, choose M here: the module | |
242 | will be called ariadne. | |
243 | ||
244 | config A2065 | |
245 | tristate "A2065 support" | |
246 | depends on NET_ETHERNET && ZORRO | |
247 | select CRC32 | |
248 | help | |
249 | If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise, | |
250 | say N. | |
251 | ||
252 | To compile this driver as a module, choose M here: the module | |
253 | will be called a2065. | |
254 | ||
255 | config HYDRA | |
256 | tristate "Hydra support" | |
257 | depends on NET_ETHERNET && ZORRO | |
258 | select CRC32 | |
259 | help | |
260 | If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. | |
261 | ||
262 | To compile this driver as a module, choose M here: the module | |
263 | will be called hydra. | |
264 | ||
265 | config ZORRO8390 | |
266 | tristate "Zorro NS8390-based Ethernet support" | |
267 | depends on NET_ETHERNET && ZORRO | |
268 | select CRC32 | |
269 | help | |
270 | This driver is for Zorro Ethernet cards using an NS8390-compatible | |
271 | chipset, like the Village Tronic Ariadne II and the Individual | |
272 | Computers X-Surf Ethernet cards. If you have such a card, say Y. | |
273 | Otherwise, say N. | |
274 | ||
275 | To compile this driver as a module, choose M here: the module | |
276 | will be called zorro8390. | |
277 | ||
278 | config APNE | |
279 | tristate "PCMCIA NE2000 support" | |
280 | depends on NET_ETHERNET && AMIGA_PCMCIA | |
281 | select CRC32 | |
282 | help | |
283 | If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, | |
284 | say N. | |
285 | ||
286 | To compile this driver as a module, choose M here: the module | |
287 | will be called apne. | |
288 | ||
289 | config APOLLO_ELPLUS | |
290 | tristate "Apollo 3c505 support" | |
291 | depends on NET_ETHERNET && APOLLO | |
292 | help | |
293 | Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card. | |
294 | If you don't have one made for Apollos, you can use one from a PC, | |
295 | except that your Apollo won't be able to boot from it (because the | |
296 | code in the ROM will be for a PC). | |
297 | ||
298 | config MAC8390 | |
299 | bool "Macintosh NS 8390 based ethernet cards" | |
300 | depends on NET_ETHERNET && MAC | |
301 | select CRC32 | |
302 | help | |
303 | If you want to include a driver to support Nubus or LC-PDS | |
304 | Ethernet cards using an NS8390 chipset or its equivalent, say Y | |
305 | and read the Ethernet-HOWTO, available from | |
306 | <http://www.tldp.org/docs.html#howto>. | |
307 | ||
308 | config MAC89x0 | |
309 | tristate "Macintosh CS89x0 based ethernet cards" | |
310 | depends on NET_ETHERNET && MAC && BROKEN | |
311 | ---help--- | |
312 | Support for CS89x0 chipset based Ethernet cards. If you have a | |
313 | Nubus or LC-PDS network (Ethernet) card of this type, say Y and | |
314 | read the Ethernet-HOWTO, available from | |
315 | <http://www.tldp.org/docs.html#howto>. | |
316 | ||
317 | To compile this driver as a module, choose M here and read | |
318 | <file:Documentation/networking/net-modules.txt>. This module will | |
319 | be called mac89x0. | |
320 | ||
321 | config MACSONIC | |
322 | tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)" | |
323 | depends on NET_ETHERNET && MAC | |
324 | ---help--- | |
325 | Support for NatSemi SONIC based Ethernet devices. This includes | |
326 | the onboard Ethernet in many Quadras as well as some LC-PDS, | |
327 | a few Nubus and all known Comm Slot Ethernet cards. If you have | |
328 | one of these say Y and read the Ethernet-HOWTO, available from | |
329 | <http://www.tldp.org/docs.html#howto>. | |
330 | ||
331 | To compile this driver as a module, choose M here and read | |
332 | <file:Documentation/networking/net-modules.txt>. This module will | |
333 | be called macsonic. | |
334 | ||
335 | config MACMACE | |
336 | bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)" | |
337 | depends on NET_ETHERNET && MAC && EXPERIMENTAL | |
338 | select CRC32 | |
339 | help | |
340 | Support for the onboard AMD 79C940 MACE Ethernet controller used in | |
341 | the 660AV and 840AV Macintosh. If you have one of these Macintoshes | |
342 | say Y and read the Ethernet-HOWTO, available from | |
343 | <http://www.tldp.org/docs.html#howto>. | |
344 | ||
345 | config MVME147_NET | |
346 | tristate "MVME147 (Lance) Ethernet support" | |
347 | depends on NET_ETHERNET && MVME147 | |
348 | select CRC32 | |
349 | help | |
350 | Support for the on-board Ethernet interface on the Motorola MVME147 | |
351 | single-board computer. Say Y here to include the | |
352 | driver for this chip in your kernel. | |
353 | To compile this driver as a module, choose M here. | |
354 | ||
355 | config MVME16x_NET | |
356 | tristate "MVME16x Ethernet support" | |
357 | depends on NET_ETHERNET && MVME16x | |
358 | help | |
359 | This is the driver for the Ethernet interface on the Motorola | |
360 | MVME162, 166, 167, 172 and 177 boards. Say Y here to include the | |
361 | driver for this chip in your kernel. | |
362 | To compile this driver as a module, choose M here. | |
363 | ||
364 | config BVME6000_NET | |
365 | tristate "BVME6000 Ethernet support" | |
366 | depends on NET_ETHERNET && BVME6000 | |
367 | help | |
368 | This is the driver for the Ethernet interface on BVME4000 and | |
369 | BVME6000 VME boards. Say Y here to include the driver for this chip | |
370 | in your kernel. | |
371 | To compile this driver as a module, choose M here. | |
372 | ||
373 | config ATARILANCE | |
374 | tristate "Atari Lance support" | |
375 | depends on NET_ETHERNET && ATARI | |
376 | help | |
377 | Say Y to include support for several Atari Ethernet adapters based | |
378 | on the AMD Lance chipset: RieblCard (with or without battery), or | |
379 | PAMCard VME (also the version by Rhotron, with different addresses). | |
380 | ||
381 | config ATARI_BIONET | |
382 | tristate "BioNet-100 support" | |
383 | depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN | |
384 | help | |
385 | Say Y to include support for BioData's BioNet-100 Ethernet adapter | |
386 | for the ACSI port. The driver works (has to work...) with a polled | |
387 | I/O scheme, so it's rather slow :-( | |
388 | ||
389 | config ATARI_PAMSNET | |
390 | tristate "PAMsNet support" | |
391 | depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN | |
392 | help | |
393 | Say Y to include support for the PAMsNet Ethernet adapter for the | |
394 | ACSI port ("ACSI node"). The driver works (has to work...) with a | |
395 | polled I/O scheme, so it's rather slow :-( | |
396 | ||
397 | config SUN3LANCE | |
398 | tristate "Sun3/Sun3x on-board LANCE support" | |
399 | depends on NET_ETHERNET && (SUN3 || SUN3X) | |
400 | help | |
401 | Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80) | |
402 | featured an AMD Lance 10Mbit Ethernet controller on board; say Y | |
403 | here to compile in the Linux driver for this and enable Ethernet. | |
404 | General Linux information on the Sun 3 and 3x series (now | |
405 | discontinued) is at | |
406 | <http://www.angelfire.com/ca2/tech68k/sun3.html>. | |
407 | ||
408 | If you're not building a kernel for a Sun 3, say N. | |
409 | ||
410 | config SUN3_82586 | |
9a482206 | 411 | bool "Sun3 on-board Intel 82586 support" |
1da177e4 LT |
412 | depends on NET_ETHERNET && SUN3 |
413 | help | |
414 | This driver enables support for the on-board Intel 82586 based | |
415 | Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note | |
416 | that this driver does not support 82586-based adapters on additional | |
417 | VME boards. | |
418 | ||
419 | config HPLANCE | |
420 | bool "HP on-board LANCE support" | |
421 | depends on NET_ETHERNET && DIO | |
422 | select CRC32 | |
423 | help | |
424 | If you want to use the builtin "LANCE" Ethernet controller on an | |
425 | HP300 machine, say Y here. | |
426 | ||
427 | config LASI_82596 | |
428 | tristate "Lasi ethernet" | |
429 | depends on NET_ETHERNET && PARISC && GSC_LASI | |
430 | help | |
431 | Say Y here to support the on-board Intel 82596 ethernet controller | |
432 | built into Hewlett-Packard PA-RISC machines. | |
433 | ||
434 | config MIPS_JAZZ_SONIC | |
435 | tristate "MIPS JAZZ onboard SONIC Ethernet support" | |
436 | depends on NET_ETHERNET && MACH_JAZZ | |
437 | help | |
438 | This is the driver for the onboard card of MIPS Magnum 4000, | |
439 | Acer PICA, Olivetti M700-10 and a few other identical OEM systems. | |
440 | ||
441 | config MIPS_GT96100ETH | |
442 | bool "MIPS GT96100 Ethernet support" | |
443 | depends on NET_ETHERNET && MIPS_GT96100 | |
444 | help | |
445 | Say Y here to support the Ethernet subsystem on your GT96100 card. | |
446 | ||
447 | config MIPS_AU1X00_ENET | |
448 | bool "MIPS AU1000 Ethernet support" | |
449 | depends on NET_ETHERNET && SOC_AU1X00 | |
450 | select CRC32 | |
451 | help | |
452 | If you have an Alchemy Semi AU1X00 based system | |
453 | say Y. Otherwise, say N. | |
454 | ||
455 | config NET_SB1250_MAC | |
456 | tristate "SB1250 Ethernet support" | |
457 | depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC | |
458 | ||
459 | config SGI_IOC3_ETH | |
460 | bool "SGI IOC3 Ethernet" | |
f406db8c | 461 | depends on NET_ETHERNET && PCI && SGI_IP27 |
1da177e4 LT |
462 | select CRC32 |
463 | select MII | |
464 | help | |
465 | If you have a network (Ethernet) card of this type, say Y and read | |
466 | the Ethernet-HOWTO, available from | |
467 | <http://www.tldp.org/docs.html#howto>. | |
468 | ||
469 | config SGI_IOC3_ETH_HW_RX_CSUM | |
470 | bool "Receive hardware checksums" | |
471 | depends on SGI_IOC3_ETH && INET | |
472 | default y | |
473 | help | |
474 | The SGI IOC3 network adapter supports TCP and UDP checksums in | |
475 | hardware to offload processing of these checksums from the CPU. At | |
476 | the moment only acceleration of IPv4 is supported. This option | |
477 | enables offloading for checksums on receive. If unsure, say Y. | |
478 | ||
479 | config SGI_IOC3_ETH_HW_TX_CSUM | |
480 | bool "Transmit hardware checksums" | |
481 | depends on SGI_IOC3_ETH && INET | |
482 | default y | |
483 | help | |
484 | The SGI IOC3 network adapter supports TCP and UDP checksums in | |
485 | hardware to offload processing of these checksums from the CPU. At | |
486 | the moment only acceleration of IPv4 is supported. This option | |
487 | enables offloading for checksums on transmit. If unsure, say Y. | |
488 | ||
dcbf8477 RB |
489 | config MIPS_SIM_NET |
490 | tristate "MIPS simulator Network device (EXPERIMENTAL)" | |
491 | depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL | |
492 | help | |
493 | The MIPSNET device is a simple Ethernet network device which is | |
494 | emulated by the MIPS Simulator. | |
495 | If you are not using a MIPSsim or are unsure, say N. | |
496 | ||
1da177e4 LT |
497 | config SGI_O2MACE_ETH |
498 | tristate "SGI O2 MACE Fast Ethernet support" | |
499 | depends on NET_ETHERNET && SGI_IP32=y | |
500 | ||
501 | config STNIC | |
502 | tristate "National DP83902AV support" | |
503 | depends on NET_ETHERNET && SUPERH | |
504 | select CRC32 | |
505 | help | |
506 | Support for cards based on the National Semiconductor DP83902AV | |
507 | ST-NIC Serial Network Interface Controller for Twisted Pair. This | |
508 | is a 10Mbit/sec Ethernet controller. Product overview and specs at | |
509 | <http://www.national.com/pf/DP/DP83902A.html>. | |
510 | ||
511 | If unsure, say N. | |
512 | ||
513 | config SUNLANCE | |
514 | tristate "Sun LANCE support" | |
515 | depends on NET_ETHERNET && SBUS | |
516 | select CRC32 | |
517 | help | |
518 | This driver supports the "le" interface present on all 32-bit Sparc | |
519 | systems, on some older Ultra systems and as an Sbus option. These | |
520 | cards are based on the AMD Lance chipset, which is better known | |
521 | via the NE2100 cards. | |
522 | ||
523 | To compile this driver as a module, choose M here: the module | |
524 | will be called sunlance. | |
525 | ||
526 | config HAPPYMEAL | |
527 | tristate "Sun Happy Meal 10/100baseT support" | |
528 | depends on NET_ETHERNET && (SBUS || PCI) | |
529 | select CRC32 | |
530 | help | |
531 | This driver supports the "hme" interface present on most Ultra | |
532 | systems and as an option on older Sbus systems. This driver supports | |
533 | both PCI and Sbus devices. This driver also supports the "qfe" quad | |
534 | 100baseT device available in both PCI and Sbus configurations. | |
535 | ||
536 | To compile this driver as a module, choose M here: the module | |
537 | will be called sunhme. | |
538 | ||
539 | config SUNBMAC | |
540 | tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)" | |
541 | depends on NET_ETHERNET && SBUS && EXPERIMENTAL | |
542 | select CRC32 | |
543 | help | |
544 | This driver supports the "be" interface available as an Sbus option. | |
545 | This is Sun's older 100baseT Ethernet device. | |
546 | ||
547 | To compile this driver as a module, choose M here: the module | |
548 | will be called sunbmac. | |
549 | ||
550 | config SUNQE | |
551 | tristate "Sun QuadEthernet support" | |
552 | depends on NET_ETHERNET && SBUS | |
553 | select CRC32 | |
554 | help | |
555 | This driver supports the "qe" 10baseT Ethernet device, available as | |
556 | an Sbus option. Note that this is not the same as Quad FastEthernet | |
557 | "qfe" which is supported by the Happy Meal driver instead. | |
558 | ||
559 | To compile this driver as a module, choose M here: the module | |
560 | will be called sunqe. | |
561 | ||
562 | config SUNGEM | |
563 | tristate "Sun GEM support" | |
564 | depends on NET_ETHERNET && PCI | |
565 | select CRC32 | |
566 | help | |
567 | Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also | |
568 | <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>. | |
569 | ||
1f26dac3 DM |
570 | config CASSINI |
571 | tristate "Sun Cassini support" | |
572 | depends on NET_ETHERNET && PCI | |
573 | select CRC32 | |
574 | help | |
575 | Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also | |
576 | <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf> | |
577 | ||
1da177e4 LT |
578 | config NET_VENDOR_3COM |
579 | bool "3COM cards" | |
580 | depends on NET_ETHERNET && (ISA || EISA || MCA || PCI) | |
581 | help | |
582 | If you have a network (Ethernet) card belonging to this class, say Y | |
583 | and read the Ethernet-HOWTO, available from | |
584 | <http://www.tldp.org/docs.html#howto>. | |
585 | ||
586 | Note that the answer to this question doesn't directly affect the | |
587 | kernel: saying N will just cause the configurator to skip all | |
588 | the questions about 3COM cards. If you say Y, you will be asked for | |
589 | your specific card in the following questions. | |
590 | ||
591 | config EL1 | |
592 | tristate "3c501 \"EtherLink\" support" | |
593 | depends on NET_VENDOR_3COM && ISA | |
594 | ---help--- | |
595 | If you have a network (Ethernet) card of this type, say Y and read | |
596 | the Ethernet-HOWTO, available from | |
597 | <http://www.tldp.org/docs.html#howto>. Also, consider buying a | |
598 | new card, since the 3c501 is slow, broken, and obsolete: you will | |
599 | have problems. Some people suggest to ping ("man ping") a nearby | |
600 | machine every minute ("man cron") when using this card. | |
601 | ||
602 | To compile this driver as a module, choose M here and read | |
603 | <file:Documentation/networking/net-modules.txt>. The module | |
604 | will be called 3c501. | |
605 | ||
606 | config EL2 | |
607 | tristate "3c503 \"EtherLink II\" support" | |
608 | depends on NET_VENDOR_3COM && ISA | |
609 | select CRC32 | |
610 | help | |
611 | If you have a network (Ethernet) card of this type, say Y and read | |
612 | the Ethernet-HOWTO, available from | |
613 | <http://www.tldp.org/docs.html#howto>. | |
614 | ||
615 | To compile this driver as a module, choose M here and read | |
616 | <file:Documentation/networking/net-modules.txt>. The module | |
617 | will be called 3c503. | |
618 | ||
619 | config ELPLUS | |
620 | tristate "3c505 \"EtherLink Plus\" support" | |
a5532606 | 621 | depends on NET_VENDOR_3COM && ISA && ISA_DMA_API |
1da177e4 LT |
622 | ---help--- |
623 | Information about this network (Ethernet) card can be found in | |
624 | <file:Documentation/networking/3c505.txt>. If you have a card of | |
625 | this type, say Y and read the Ethernet-HOWTO, available from | |
626 | <http://www.tldp.org/docs.html#howto>. | |
627 | ||
628 | To compile this driver as a module, choose M here and read | |
629 | <file:Documentation/networking/net-modules.txt>. The module | |
630 | will be called 3c505. | |
631 | ||
632 | config EL16 | |
633 | tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)" | |
634 | depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL | |
635 | help | |
636 | If you have a network (Ethernet) card of this type, say Y and read | |
637 | the Ethernet-HOWTO, available from | |
638 | <http://www.tldp.org/docs.html#howto>. | |
639 | ||
640 | To compile this driver as a module, choose M here and read | |
641 | <file:Documentation/networking/net-modules.txt>. The module | |
642 | will be called 3c507. | |
643 | ||
644 | config EL3 | |
645 | tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support" | |
646 | depends on NET_VENDOR_3COM && (ISA || EISA || MCA) | |
647 | ---help--- | |
648 | If you have a network (Ethernet) card belonging to the 3Com | |
649 | EtherLinkIII series, say Y and read the Ethernet-HOWTO, available | |
650 | from <http://www.tldp.org/docs.html#howto>. | |
651 | ||
652 | If your card is not working you may need to use the DOS | |
653 | setup disk to disable Plug & Play mode, and to select the default | |
654 | media type. | |
655 | ||
656 | To compile this driver as a module, choose M here and read | |
657 | <file:Documentation/networking/net-modules.txt>. The module | |
658 | will be called 3c509. | |
659 | ||
660 | config 3C515 | |
661 | tristate "3c515 ISA \"Fast EtherLink\"" | |
a5532606 | 662 | depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API |
1da177e4 LT |
663 | help |
664 | If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet | |
665 | network card, say Y and read the Ethernet-HOWTO, available from | |
666 | <http://www.tldp.org/docs.html#howto>. | |
667 | ||
668 | To compile this driver as a module, choose M here and read | |
669 | <file:Documentation/networking/net-modules.txt>. The module | |
670 | will be called 3c515. | |
671 | ||
672 | config ELMC | |
673 | tristate "3c523 \"EtherLink/MC\" support" | |
674 | depends on NET_VENDOR_3COM && MCA_LEGACY | |
675 | help | |
676 | If you have a network (Ethernet) card of this type, say Y and read | |
677 | the Ethernet-HOWTO, available from | |
678 | <http://www.tldp.org/docs.html#howto>. | |
679 | ||
680 | To compile this driver as a module, choose M here and read | |
681 | <file:Documentation/networking/net-modules.txt>. The module | |
682 | will be called 3c523. | |
683 | ||
684 | config ELMC_II | |
685 | tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)" | |
686 | depends on NET_VENDOR_3COM && MCA && MCA_LEGACY | |
687 | help | |
688 | If you have a network (Ethernet) card of this type, say Y and read | |
689 | the Ethernet-HOWTO, available from | |
690 | <http://www.tldp.org/docs.html#howto>. | |
691 | ||
692 | To compile this driver as a module, choose M here and read | |
693 | <file:Documentation/networking/net-modules.txt>. The module | |
694 | will be called 3c527. | |
695 | ||
696 | config VORTEX | |
697 | tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support" | |
698 | depends on NET_VENDOR_3COM && (PCI || EISA) | |
699 | select MII | |
700 | ---help--- | |
701 | This option enables driver support for a large number of 10mbps and | |
702 | 10/100mbps EISA, PCI and PCMCIA 3Com network cards: | |
703 | ||
704 | "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI | |
705 | "Boomerang" (EtherLink XL 3c900 or 3c905) PCI | |
706 | "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus | |
707 | "Tornado" (3c905) PCI | |
708 | "Hurricane" (3c555/3cSOHO) PCI | |
709 | ||
710 | If you have such a card, say Y and read the Ethernet-HOWTO, | |
711 | available from <http://www.tldp.org/docs.html#howto>. More | |
712 | specific information is in | |
713 | <file:Documentation/networking/vortex.txt> and in the comments at | |
714 | the beginning of <file:drivers/net/3c59x.c>. | |
715 | ||
716 | To compile this support as a module, choose M here and read | |
717 | <file:Documentation/networking/net-modules.txt>. | |
718 | ||
719 | config TYPHOON | |
720 | tristate "3cr990 series \"Typhoon\" support" | |
721 | depends on NET_VENDOR_3COM && PCI | |
722 | select CRC32 | |
723 | ---help--- | |
724 | This option enables driver support for the 3cr990 series of cards: | |
725 | ||
726 | 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97, | |
727 | 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server, | |
728 | 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR | |
729 | ||
730 | If you have a network (Ethernet) card of this type, say Y and read | |
731 | the Ethernet-HOWTO, available from | |
732 | <http://www.tldp.org/docs.html#howto>. | |
733 | ||
734 | To compile this driver as a module, choose M here and read | |
735 | <file:Documentation/networking/net-modules.txt>. The module | |
736 | will be called typhoon. | |
737 | ||
738 | config LANCE | |
739 | tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" | |
a5532606 | 740 | depends on NET_ETHERNET && ISA && ISA_DMA_API |
1da177e4 LT |
741 | help |
742 | If you have a network (Ethernet) card of this type, say Y and read | |
743 | the Ethernet-HOWTO, available from | |
744 | <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are | |
745 | of this type. | |
746 | ||
747 | To compile this driver as a module, choose M here: the module | |
748 | will be called lance. This is recommended. | |
749 | ||
750 | config NET_VENDOR_SMC | |
751 | bool "Western Digital/SMC cards" | |
752 | depends on NET_ETHERNET && (ISA || MCA || EISA || MAC) | |
753 | help | |
754 | If you have a network (Ethernet) card belonging to this class, say Y | |
755 | and read the Ethernet-HOWTO, available from | |
756 | <http://www.tldp.org/docs.html#howto>. | |
757 | ||
758 | Note that the answer to this question doesn't directly affect the | |
759 | kernel: saying N will just cause the configurator to skip all | |
760 | the questions about Western Digital cards. If you say Y, you will be | |
761 | asked for your specific card in the following questions. | |
762 | ||
763 | config WD80x3 | |
764 | tristate "WD80*3 support" | |
765 | depends on NET_VENDOR_SMC && ISA | |
766 | select CRC32 | |
767 | help | |
768 | If you have a network (Ethernet) card of this type, say Y and read | |
769 | the Ethernet-HOWTO, available from | |
770 | <http://www.tldp.org/docs.html#howto>. | |
771 | ||
772 | To compile this driver as a module, choose M here and read | |
773 | <file:Documentation/networking/net-modules.txt>. The module | |
774 | will be called wd. | |
775 | ||
776 | config ULTRAMCA | |
777 | tristate "SMC Ultra MCA support" | |
778 | depends on NET_VENDOR_SMC && MCA | |
779 | select CRC32 | |
780 | help | |
781 | If you have a network (Ethernet) card of this type and are running | |
782 | an MCA based system (PS/2), say Y and read the Ethernet-HOWTO, | |
783 | available from <http://www.tldp.org/docs.html#howto>. | |
784 | ||
785 | To compile this driver as a module, choose M here and read | |
786 | <file:Documentation/networking/net-modules.txt>. The module | |
787 | will be called smc-mca. | |
788 | ||
789 | config ULTRA | |
790 | tristate "SMC Ultra support" | |
791 | depends on NET_VENDOR_SMC && ISA | |
792 | select CRC32 | |
793 | ---help--- | |
794 | If you have a network (Ethernet) card of this type, say Y and read | |
795 | the Ethernet-HOWTO, available from | |
796 | <http://www.tldp.org/docs.html#howto>. | |
797 | ||
798 | Important: There have been many reports that, with some motherboards | |
799 | mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, | |
800 | such as some BusLogic models) causes corruption problems with many | |
801 | operating systems. The Linux smc-ultra driver has a work-around for | |
802 | this but keep it in mind if you have such a SCSI card and have | |
803 | problems. | |
804 | ||
805 | To compile this driver as a module, choose M here and read | |
806 | <file:Documentation/networking/net-modules.txt>. The module | |
807 | will be called smc-ultra. | |
808 | ||
809 | config ULTRA32 | |
810 | tristate "SMC Ultra32 EISA support" | |
811 | depends on NET_VENDOR_SMC && EISA | |
812 | select CRC32 | |
813 | help | |
814 | If you have a network (Ethernet) card of this type, say Y and read | |
815 | the Ethernet-HOWTO, available from | |
816 | <http://www.tldp.org/docs.html#howto>. | |
817 | ||
818 | To compile this driver as a module, choose M here and read | |
819 | <file:Documentation/networking/net-modules.txt>. The module | |
820 | will be called smc-ultra32. | |
821 | ||
822 | config SMC91X | |
823 | tristate "SMC 91C9x/91C1xxx support" | |
824 | select CRC32 | |
825 | select MII | |
55793455 | 826 | depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00) |
1da177e4 LT |
827 | help |
828 | This is a driver for SMC's 91x series of Ethernet chipsets, | |
829 | including the SMC91C94 and the SMC91C111. Say Y if you want it | |
830 | compiled into the kernel, and read the file | |
831 | <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, | |
832 | available from <http://www.linuxdoc.org/docs.html#howto>. | |
833 | ||
834 | This driver is also available as a module ( = code which can be | |
835 | inserted in and removed from the running kernel whenever you want). | |
836 | The module will be called smc91x. If you want to compile it as a | |
837 | module, say M here and read <file:Documentation/modules.txt> as well | |
838 | as <file:Documentation/networking/net-modules.txt>. | |
839 | ||
840 | config SMC9194 | |
841 | tristate "SMC 9194 support" | |
842 | depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN) | |
843 | select CRC32 | |
844 | ---help--- | |
845 | This is support for the SMC9xxx based Ethernet cards. Choose this | |
846 | option if you have a DELL laptop with the docking station, or | |
847 | another SMC9192/9194 based chipset. Say Y if you want it compiled | |
848 | into the kernel, and read the file | |
849 | <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, | |
850 | available from <http://www.tldp.org/docs.html#howto>. | |
851 | ||
852 | To compile this driver as a module, choose M here and read | |
853 | <file:Documentation/networking/net-modules.txt>. The module | |
854 | will be called smc9194. | |
855 | ||
a1365275 SH |
856 | config DM9000 |
857 | tristate "DM9000 support" | |
b6d08c0e | 858 | depends on (ARM || MIPS) && NET_ETHERNET |
a1365275 SH |
859 | select CRC32 |
860 | select MII | |
861 | ---help--- | |
862 | Support for DM9000 chipset. | |
863 | ||
864 | To compile this driver as a module, choose M here and read | |
865 | <file:Documentation/networking/net-modules.txt>. The module will be | |
866 | called dm9000. | |
867 | ||
1da177e4 LT |
868 | config NET_VENDOR_RACAL |
869 | bool "Racal-Interlan (Micom) NI cards" | |
870 | depends on NET_ETHERNET && ISA | |
871 | help | |
872 | If you have a network (Ethernet) card belonging to this class, such | |
873 | as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO, | |
874 | available from <http://www.tldp.org/docs.html#howto>. | |
875 | ||
876 | Note that the answer to this question doesn't directly affect the | |
877 | kernel: saying N will just cause the configurator to skip all | |
878 | the questions about NI cards. If you say Y, you will be asked for | |
879 | your specific card in the following questions. | |
880 | ||
881 | config NI5010 | |
882 | tristate "NI5010 support (EXPERIMENTAL)" | |
883 | depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP | |
884 | ---help--- | |
885 | If you have a network (Ethernet) card of this type, say Y and read | |
886 | the Ethernet-HOWTO, available from | |
887 | <http://www.tldp.org/docs.html#howto>. Note that this is still | |
888 | experimental code. | |
889 | ||
890 | To compile this driver as a module, choose M here and read | |
891 | <file:Documentation/networking/net-modules.txt>. The module | |
892 | will be called ni5010. | |
893 | ||
894 | config NI52 | |
895 | tristate "NI5210 support" | |
896 | depends on NET_VENDOR_RACAL && ISA | |
897 | help | |
898 | If you have a network (Ethernet) card of this type, say Y and read | |
899 | the Ethernet-HOWTO, available from | |
900 | <http://www.tldp.org/docs.html#howto>. | |
901 | ||
902 | To compile this driver as a module, choose M here and read | |
903 | <file:Documentation/networking/net-modules.txt>. The module | |
904 | will be called ni52. | |
905 | ||
906 | config NI65 | |
907 | tristate "NI6510 support" | |
a5532606 | 908 | depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API |
1da177e4 LT |
909 | help |
910 | If you have a network (Ethernet) card of this type, say Y and read | |
911 | the Ethernet-HOWTO, available from | |
912 | <http://www.tldp.org/docs.html#howto>. | |
913 | ||
914 | To compile this driver as a module, choose M here and read | |
915 | <file:Documentation/networking/net-modules.txt>. The module | |
916 | will be called ni65. | |
917 | ||
918 | source "drivers/net/tulip/Kconfig" | |
919 | ||
920 | config AT1700 | |
921 | tristate "AT1700/1720 support (EXPERIMENTAL)" | |
922 | depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL | |
923 | select CRC32 | |
924 | ---help--- | |
925 | If you have a network (Ethernet) card of this type, say Y and read | |
926 | the Ethernet-HOWTO, available from | |
927 | <http://www.tldp.org/docs.html#howto>. | |
928 | ||
929 | To compile this driver as a module, choose M here and read | |
930 | <file:Documentation/networking/net-modules.txt>. The module | |
931 | will be called at1700. | |
932 | ||
933 | config DEPCA | |
934 | tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support" | |
935 | depends on NET_ETHERNET && (ISA || EISA || MCA) | |
936 | select CRC32 | |
937 | ---help--- | |
938 | If you have a network (Ethernet) card of this type, say Y and read | |
939 | the Ethernet-HOWTO, available from | |
940 | <http://www.tldp.org/docs.html#howto> as well as | |
941 | <file:drivers/net/depca.c>. | |
942 | ||
943 | To compile this driver as a module, choose M here and read | |
944 | <file:Documentation/networking/net-modules.txt>. The module | |
945 | will be called depca. | |
946 | ||
947 | config HP100 | |
948 | tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support" | |
949 | depends on NET_ETHERNET && (ISA || EISA || PCI) | |
950 | help | |
951 | If you have a network (Ethernet) card of this type, say Y and read | |
952 | the Ethernet-HOWTO, available from | |
953 | <http://www.tldp.org/docs.html#howto>. | |
954 | ||
955 | To compile this driver as a module, choose M here and read | |
956 | <file:Documentation/networking/net-modules.txt>. The module | |
957 | will be called hp100. | |
958 | ||
959 | config NET_ISA | |
960 | bool "Other ISA cards" | |
961 | depends on NET_ETHERNET && ISA | |
962 | ---help--- | |
963 | If your network (Ethernet) card hasn't been mentioned yet and its | |
964 | bus system (that's the way the cards talks to the other components | |
965 | of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y. | |
966 | Make sure you know the name of your card. Read the Ethernet-HOWTO, | |
967 | available from <http://www.tldp.org/docs.html#howto>. | |
968 | ||
969 | If unsure, say Y. | |
970 | ||
971 | Note that the answer to this question doesn't directly affect the | |
972 | kernel: saying N will just cause the configurator to skip all | |
973 | the remaining ISA network card questions. If you say Y, you will be | |
974 | asked for your specific card in the following questions. | |
975 | ||
976 | config E2100 | |
977 | tristate "Cabletron E21xx support" | |
978 | depends on NET_ISA | |
979 | select CRC32 | |
980 | help | |
981 | If you have a network (Ethernet) card of this type, say Y and read | |
982 | the Ethernet-HOWTO, available from | |
983 | <http://www.tldp.org/docs.html#howto>. | |
984 | ||
985 | To compile this driver as a module, choose M here and read | |
986 | <file:Documentation/networking/net-modules.txt>. The module | |
987 | will be called e2100. | |
988 | ||
989 | config EWRK3 | |
990 | tristate "EtherWORKS 3 (DE203, DE204, DE205) support" | |
991 | depends on NET_ISA | |
992 | select CRC32 | |
993 | ---help--- | |
994 | This driver supports the DE203, DE204 and DE205 network (Ethernet) | |
995 | cards. If this is for you, say Y and read | |
996 | <file:Documentation/networking/ewrk3.txt> in the kernel source as | |
997 | well as the Ethernet-HOWTO, available from | |
998 | <http://www.tldp.org/docs.html#howto>. | |
999 | ||
1000 | To compile this driver as a module, choose M here and read | |
1001 | <file:Documentation/networking/net-modules.txt>. The module | |
1002 | will be called ewrk3. | |
1003 | ||
1004 | config EEXPRESS | |
1005 | tristate "EtherExpress 16 support" | |
1006 | depends on NET_ISA | |
1007 | ---help--- | |
1008 | If you have an EtherExpress16 network (Ethernet) card, say Y and | |
1009 | read the Ethernet-HOWTO, available from | |
1010 | <http://www.tldp.org/docs.html#howto>. Note that the Intel | |
1011 | EtherExpress16 card used to be regarded as a very poor choice | |
1012 | because the driver was very unreliable. We now have a new driver | |
1013 | that should do better. | |
1014 | ||
1015 | To compile this driver as a module, choose M here and read | |
1016 | <file:Documentation/networking/net-modules.txt>. The module | |
1017 | will be called eexpress. | |
1018 | ||
1019 | config EEXPRESS_PRO | |
1020 | tristate "EtherExpressPro support/EtherExpress 10 (i82595) support" | |
1021 | depends on NET_ISA | |
1022 | ---help--- | |
1023 | If you have a network (Ethernet) card of this type, say Y. This | |
1024 | driver supports intel i82595{FX,TX} based boards. Note however | |
1025 | that the EtherExpress PRO/100 Ethernet card has its own separate | |
1026 | driver. Please read the Ethernet-HOWTO, available from | |
1027 | <http://www.tldp.org/docs.html#howto>. | |
1028 | ||
1029 | To compile this driver as a module, choose M here and read | |
1030 | <file:Documentation/networking/net-modules.txt>. The module | |
1031 | will be called eepro. | |
1032 | ||
1da177e4 LT |
1033 | config HPLAN_PLUS |
1034 | tristate "HP PCLAN+ (27247B and 27252A) support" | |
1035 | depends on NET_ISA | |
1036 | select CRC32 | |
1037 | help | |
1038 | If you have a network (Ethernet) card of this type, say Y and read | |
1039 | the Ethernet-HOWTO, available from | |
1040 | <http://www.tldp.org/docs.html#howto>. | |
1041 | ||
1042 | To compile this driver as a module, choose M here and read | |
1043 | <file:Documentation/networking/net-modules.txt>. The module | |
1044 | will be called hp-plus. | |
1045 | ||
1046 | config HPLAN | |
1047 | tristate "HP PCLAN (27245 and other 27xxx series) support" | |
1048 | depends on NET_ISA | |
1049 | select CRC32 | |
1050 | help | |
1051 | If you have a network (Ethernet) card of this type, say Y and read | |
1052 | the Ethernet-HOWTO, available from | |
1053 | <http://www.tldp.org/docs.html#howto>. | |
1054 | ||
1055 | To compile this driver as a module, choose M here and read | |
1056 | <file:Documentation/networking/net-modules.txt>. The module | |
1057 | will be called hp. | |
1058 | ||
1059 | config LP486E | |
1060 | tristate "LP486E on board Ethernet" | |
1061 | depends on NET_ISA | |
1062 | help | |
1063 | Say Y here to support the 82596-based on-board Ethernet controller | |
1064 | for the Panther motherboard, which is one of the two shipped in the | |
1065 | Intel Professional Workstation. | |
1066 | ||
1067 | config ETH16I | |
1068 | tristate "ICL EtherTeam 16i/32 support" | |
1069 | depends on NET_ISA | |
1070 | help | |
1071 | If you have a network (Ethernet) card of this type, say Y and read | |
1072 | the Ethernet-HOWTO, available from | |
1073 | <http://www.tldp.org/docs.html#howto>. | |
1074 | ||
1075 | To compile this driver as a module, choose M here and read | |
1076 | <file:Documentation/networking/net-modules.txt>. The module | |
1077 | will be called eth16i. | |
1078 | ||
1079 | config NE2000 | |
1080 | tristate "NE2000/NE1000 support" | |
1081 | depends on NET_ISA || (Q40 && m) || M32R | |
1082 | select CRC32 | |
1083 | ---help--- | |
1084 | If you have a network (Ethernet) card of this type, say Y and read | |
1085 | the Ethernet-HOWTO, available from | |
1086 | <http://www.tldp.org/docs.html#howto>. Many Ethernet cards | |
1087 | without a specific driver are compatible with NE2000. | |
1088 | ||
1089 | If you have a PCI NE2000 card however, say N here and Y to "PCI | |
1090 | NE2000 support", above. If you have a NE2000 card and are running on | |
1091 | an MCA system (a bus system used on some IBM PS/2 computers and | |
1092 | laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", | |
1093 | below. | |
1094 | ||
1095 | To compile this driver as a module, choose M here and read | |
1096 | <file:Documentation/networking/net-modules.txt>. The module | |
1097 | will be called ne. | |
1098 | ||
1099 | config ZNET | |
1100 | tristate "Zenith Z-Note support (EXPERIMENTAL)" | |
a5532606 | 1101 | depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API |
1da177e4 LT |
1102 | help |
1103 | The Zenith Z-Note notebook computer has a built-in network | |
1104 | (Ethernet) card, and this is the Linux driver for it. Note that the | |
1105 | IBM Thinkpad 300 is compatible with the Z-Note and is also supported | |
1106 | by this driver. Read the Ethernet-HOWTO, available from | |
1107 | <http://www.tldp.org/docs.html#howto>. | |
1108 | ||
1109 | config SEEQ8005 | |
1110 | tristate "SEEQ8005 support (EXPERIMENTAL)" | |
1111 | depends on NET_ISA && EXPERIMENTAL | |
1112 | help | |
1113 | This is a driver for the SEEQ 8005 network (Ethernet) card. If this | |
1114 | is for you, read the Ethernet-HOWTO, available from | |
1115 | <http://www.tldp.org/docs.html#howto>. | |
1116 | ||
1117 | To compile this driver as a module, choose M here and read | |
1118 | <file:Documentation/networking/net-modules.txt>. The module | |
1119 | will be called seeq8005. | |
1120 | ||
1da177e4 LT |
1121 | config SKMC |
1122 | tristate "SKnet MCA support" | |
1123 | depends on NET_ETHERNET && MCA && BROKEN | |
1124 | ---help--- | |
1125 | These are Micro Channel Ethernet adapters. You need to say Y to "MCA | |
1126 | support" in order to use this driver. Supported cards are the SKnet | |
1127 | Junior MC2 and the SKnet MC2(+). The driver automatically | |
1128 | distinguishes between the two cards. Note that using multiple boards | |
1129 | of different type hasn't been tested with this driver. Say Y if you | |
1130 | have one of these Ethernet adapters. | |
1131 | ||
1132 | To compile this driver as a module, choose M here and read | |
1133 | <file:Documentation/networking/net-modules.txt>. The module | |
1134 | will be called sk_mca. | |
1135 | ||
1136 | config NE2_MCA | |
1137 | tristate "NE/2 (ne2000 MCA version) support" | |
1138 | depends on NET_ETHERNET && MCA_LEGACY | |
1139 | select CRC32 | |
1140 | help | |
1141 | If you have a network (Ethernet) card of this type, say Y and read | |
1142 | the Ethernet-HOWTO, available from | |
1143 | <http://www.tldp.org/docs.html#howto>. | |
1144 | ||
1145 | To compile this driver as a module, choose M here and read | |
1146 | <file:Documentation/networking/net-modules.txt>. The module | |
1147 | will be called ne2. | |
1148 | ||
1149 | config IBMLANA | |
1150 | tristate "IBM LAN Adapter/A support" | |
1151 | depends on NET_ETHERNET && MCA && MCA_LEGACY | |
1152 | ---help--- | |
1153 | This is a Micro Channel Ethernet adapter. You need to set | |
1154 | CONFIG_MCA to use this driver. It is both available as an in-kernel | |
1155 | driver and as a module. | |
1156 | ||
1157 | To compile this driver as a module, choose M here and read | |
1158 | <file:Documentation/networking/net-modules.txt>. The only | |
1159 | currently supported card is the IBM LAN Adapter/A for Ethernet. It | |
1160 | will both support 16K and 32K memory windows, however a 32K window | |
1161 | gives a better security against packet losses. Usage of multiple | |
1162 | boards with this driver should be possible, but has not been tested | |
1163 | up to now due to lack of hardware. | |
1164 | ||
1165 | config IBMVETH | |
1166 | tristate "IBM LAN Virtual Ethernet support" | |
cbcd2a4c | 1167 | depends on NET_ETHERNET && PPC_PSERIES |
1da177e4 LT |
1168 | ---help--- |
1169 | This driver supports virtual ethernet adapters on newer IBM iSeries | |
1170 | and pSeries systems. | |
1171 | ||
1172 | To compile this driver as a module, choose M here and read | |
1173 | <file:Documentation/networking/net-modules.txt>. The module will | |
1174 | be called ibmveth. | |
1175 | ||
1176 | config IBM_EMAC | |
37448f7d | 1177 | tristate "PowerPC 4xx on-chip Ethernet support" |
1da177e4 | 1178 | depends on 4xx |
37448f7d ES |
1179 | help |
1180 | This driver supports the PowerPC 4xx EMAC family of on-chip | |
1181 | Ethernet controllers. | |
1da177e4 LT |
1182 | |
1183 | config IBM_EMAC_RXB | |
1184 | int "Number of receive buffers" | |
1185 | depends on IBM_EMAC | |
37448f7d | 1186 | default "128" |
1da177e4 LT |
1187 | |
1188 | config IBM_EMAC_TXB | |
1189 | int "Number of transmit buffers" | |
1190 | depends on IBM_EMAC | |
37448f7d ES |
1191 | default "64" |
1192 | ||
1193 | config IBM_EMAC_POLL_WEIGHT | |
1194 | int "MAL NAPI polling weight" | |
1195 | depends on IBM_EMAC | |
1196 | default "32" | |
1da177e4 | 1197 | |
37448f7d ES |
1198 | config IBM_EMAC_RX_COPY_THRESHOLD |
1199 | int "RX skb copy threshold (bytes)" | |
1da177e4 | 1200 | depends on IBM_EMAC |
37448f7d | 1201 | default "256" |
1da177e4 | 1202 | |
37448f7d ES |
1203 | config IBM_EMAC_RX_SKB_HEADROOM |
1204 | int "Additional RX skb headroom (bytes)" | |
1da177e4 LT |
1205 | depends on IBM_EMAC |
1206 | default "0" | |
37448f7d ES |
1207 | help |
1208 | Additional receive skb headroom. Note, that driver | |
1209 | will always reserve at least 2 bytes to make IP header | |
1210 | aligned, so usualy there is no need to add any additional | |
1211 | headroom. | |
1212 | ||
1213 | If unsure, set to 0. | |
1214 | ||
1215 | config IBM_EMAC_PHY_RX_CLK_FIX | |
1216 | bool "PHY Rx clock workaround" | |
1b195916 | 1217 | depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR) |
37448f7d ES |
1218 | help |
1219 | Enable this if EMAC attached to a PHY which doesn't generate | |
1220 | RX clock if there is no link, if this is the case, you will | |
1221 | see "TX disable timeout" or "RX disable timeout" in the system | |
1222 | log. | |
1223 | ||
1224 | If unsure, say N. | |
1225 | ||
1226 | config IBM_EMAC_DEBUG | |
1227 | bool "Debugging" | |
1228 | depends on IBM_EMAC | |
1229 | default n | |
1230 | ||
1231 | config IBM_EMAC_ZMII | |
1232 | bool | |
1233 | depends on IBM_EMAC && (NP405H || NP405L || 44x) | |
1234 | default y | |
1235 | ||
1236 | config IBM_EMAC_RGMII | |
1237 | bool | |
1238 | depends on IBM_EMAC && 440GX | |
1239 | default y | |
1240 | ||
1241 | config IBM_EMAC_TAH | |
1242 | bool | |
1243 | depends on IBM_EMAC && 440GX | |
1244 | default y | |
1da177e4 LT |
1245 | |
1246 | config NET_PCI | |
1247 | bool "EISA, VLB, PCI and on board controllers" | |
1248 | depends on NET_ETHERNET && (ISA || EISA || PCI) | |
1249 | help | |
1250 | This is another class of network cards which attach directly to the | |
1251 | bus. If you have one of those, say Y and read the Ethernet-HOWTO, | |
1252 | available from <http://www.tldp.org/docs.html#howto>. | |
1253 | ||
1254 | Note that the answer to this question doesn't directly affect the | |
1255 | kernel: saying N will just cause the configurator to skip all | |
1256 | the questions about this class of network cards. If you say Y, you | |
1257 | will be asked for your specific card in the following questions. If | |
1258 | you are unsure, say Y. | |
1259 | ||
1260 | config PCNET32 | |
1261 | tristate "AMD PCnet32 PCI support" | |
1262 | depends on NET_PCI && PCI | |
1263 | select CRC32 | |
1264 | select MII | |
1265 | help | |
1266 | If you have a PCnet32 or PCnetPCI based network (Ethernet) card, | |
1267 | answer Y here and read the Ethernet-HOWTO, available from | |
1268 | <http://www.tldp.org/docs.html#howto>. | |
1269 | ||
1270 | To compile this driver as a module, choose M here and read | |
1271 | <file:Documentation/networking/net-modules.txt>. The module | |
1272 | will be called pcnet32. | |
1273 | ||
1274 | config AMD8111_ETH | |
1275 | tristate "AMD 8111 (new PCI lance) support" | |
1276 | depends on NET_PCI && PCI | |
1277 | select CRC32 | |
1278 | select MII | |
1279 | help | |
1280 | If you have an AMD 8111-based PCI lance ethernet card, | |
1281 | answer Y here and read the Ethernet-HOWTO, available from | |
1282 | <http://www.tldp.org/docs.html#howto>. | |
1283 | ||
1284 | To compile this driver as a module, choose M here and read | |
1285 | <file:Documentation/networking/net-modules.txt>. The module | |
1286 | will be called amd8111e. | |
1287 | config AMD8111E_NAPI | |
1288 | bool "Enable NAPI support" | |
1289 | depends on AMD8111_ETH | |
1290 | help | |
1291 | NAPI is a new driver API designed to reduce CPU and interrupt load | |
1292 | when the driver is receiving lots of packets from the card. It is | |
1293 | still somewhat experimental and thus not yet enabled by default. | |
1294 | ||
1295 | If your estimated Rx load is 10kpps or more, or if the card will be | |
1296 | deployed on potentially unfriendly networks (e.g. in a firewall), | |
1297 | then say Y here. | |
1298 | ||
1299 | See <file:Documentation/networking/NAPI_HOWTO.txt> for more | |
1300 | information. | |
1301 | ||
1302 | If in doubt, say N. | |
1303 | ||
1304 | config ADAPTEC_STARFIRE | |
1305 | tristate "Adaptec Starfire/DuraLAN support" | |
1306 | depends on NET_PCI && PCI | |
1307 | select CRC32 | |
1308 | select MII | |
1309 | help | |
1310 | Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network | |
1311 | adapter. The DuraLAN chip is used on the 64 bit PCI boards from | |
1312 | Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip | |
1313 | driver. | |
1314 | ||
1315 | To compile this driver as a module, choose M here: the module | |
1316 | will be called starfire. This is recommended. | |
1317 | ||
1318 | config ADAPTEC_STARFIRE_NAPI | |
1319 | bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" | |
1320 | depends on ADAPTEC_STARFIRE && EXPERIMENTAL | |
1321 | help | |
1322 | NAPI is a new driver API designed to reduce CPU and interrupt load | |
1323 | when the driver is receiving lots of packets from the card. It is | |
1324 | still somewhat experimental and thus not yet enabled by default. | |
1325 | ||
1326 | If your estimated Rx load is 10kpps or more, or if the card will be | |
1327 | deployed on potentially unfriendly networks (e.g. in a firewall), | |
1328 | then say Y here. | |
1329 | ||
1330 | See <file:Documentation/networking/NAPI_HOWTO.txt> for more | |
1331 | information. | |
1332 | ||
1333 | If in doubt, say N. | |
1334 | ||
1335 | config AC3200 | |
1336 | tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)" | |
1337 | depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL | |
1338 | select CRC32 | |
1339 | help | |
1340 | If you have a network (Ethernet) card of this type, say Y and read | |
1341 | the Ethernet-HOWTO, available from | |
1342 | <http://www.tldp.org/docs.html#howto>. | |
1343 | ||
1344 | To compile this driver as a module, choose M here and read | |
1345 | <file:Documentation/networking/net-modules.txt>. The module | |
1346 | will be called ac3200. | |
1347 | ||
1348 | config APRICOT | |
1349 | tristate "Apricot Xen-II on board Ethernet" | |
1350 | depends on NET_PCI && ISA | |
1351 | help | |
1352 | If you have a network (Ethernet) controller of this type, say Y and | |
1353 | read the Ethernet-HOWTO, available from | |
1354 | <http://www.tldp.org/docs.html#howto>. | |
1355 | ||
1356 | To compile this driver as a module, choose M here and read | |
1357 | <file:Documentation/networking/net-modules.txt>. The module will be | |
1358 | called apricot. | |
1359 | ||
1360 | config B44 | |
1361 | tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)" | |
1362 | depends on NET_PCI && PCI && EXPERIMENTAL | |
1363 | select MII | |
1364 | help | |
1365 | If you have a network (Ethernet) controller of this type, say Y and | |
1366 | read the Ethernet-HOWTO, available from | |
1367 | <http://www.tldp.org/docs.html#howto>. | |
1368 | ||
1369 | To compile this driver as a module, choose M here and read | |
1370 | <file:Documentation/networking/net-modules.txt>. The module will be | |
1371 | called b44. | |
1372 | ||
1373 | config FORCEDETH | |
1374 | tristate "Reverse Engineered nForce Ethernet support (EXPERIMENTAL)" | |
1375 | depends on NET_PCI && PCI && EXPERIMENTAL | |
1376 | help | |
1377 | If you have a network (Ethernet) controller of this type, say Y and | |
1378 | read the Ethernet-HOWTO, available from | |
1379 | <http://www.tldp.org/docs.html#howto>. | |
1380 | ||
1381 | To compile this driver as a module, choose M here and read | |
1382 | <file:Documentation/networking/net-modules.txt>. The module will be | |
1383 | called forcedeth. | |
1384 | ||
1385 | ||
1386 | config CS89x0 | |
1387 | tristate "CS89x0 support" | |
9c878967 | 1388 | depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X) |
1da177e4 LT |
1389 | ---help--- |
1390 | Support for CS89x0 chipset based Ethernet cards. If you have a | |
1391 | network (Ethernet) card of this type, say Y and read the | |
1392 | Ethernet-HOWTO, available from | |
1393 | <http://www.tldp.org/docs.html#howto> as well as | |
1394 | <file:Documentation/networking/cs89x0.txt>. | |
1395 | ||
1396 | To compile this driver as a module, choose M here and read | |
1397 | <file:Documentation/networking/net-modules.txt>. The module will be | |
fd85d765 | 1398 | called cs89x0. |
1da177e4 LT |
1399 | |
1400 | config TC35815 | |
1401 | tristate "TOSHIBA TC35815 Ethernet support" | |
1402 | depends on NET_PCI && PCI && TOSHIBA_JMR3927 | |
1403 | ||
1404 | config DGRS | |
1405 | tristate "Digi Intl. RightSwitch SE-X support" | |
1406 | depends on NET_PCI && (PCI || EISA) | |
1407 | ---help--- | |
1408 | This is support for the Digi International RightSwitch series of | |
1409 | PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6 | |
1410 | models. If you have a network card of this type, say Y and read the | |
1411 | Ethernet-HOWTO, available from | |
1412 | <http://www.tldp.org/docs.html#howto>. More specific | |
1413 | information is contained in <file:Documentation/networking/dgrs.txt>. | |
1414 | ||
1415 | To compile this driver as a module, choose M here and read | |
1416 | <file:Documentation/networking/net-modules.txt>. The module | |
1417 | will be called dgrs. | |
1418 | ||
1419 | config EEPRO100 | |
1420 | tristate "EtherExpressPro/100 support (eepro100, original Becker driver)" | |
1421 | depends on NET_PCI && PCI | |
1422 | select MII | |
1423 | help | |
1424 | If you have an Intel EtherExpress PRO/100 PCI network (Ethernet) | |
1425 | card, say Y and read the Ethernet-HOWTO, available from | |
1426 | <http://www.tldp.org/docs.html#howto>. | |
1427 | ||
1428 | To compile this driver as a module, choose M here and read | |
1429 | <file:Documentation/networking/net-modules.txt>. The module | |
1430 | will be called eepro100. | |
1431 | ||
1432 | ||
1433 | config E100 | |
1434 | tristate "Intel(R) PRO/100+ support" | |
1435 | depends on NET_PCI && PCI | |
1436 | select MII | |
1437 | ---help--- | |
1438 | This driver supports Intel(R) PRO/100 family of adapters. | |
1439 | To verify that your adapter is supported, find the board ID number | |
1440 | on the adapter. Look for a label that has a barcode and a number | |
1441 | in the format 123456-001 (six digits hyphen three digits). | |
1442 | ||
1443 | Use the above information and the Adapter & Driver ID Guide at: | |
1444 | ||
1445 | <http://support.intel.com/support/network/adapter/pro100/21397.htm> | |
1446 | ||
1447 | to identify the adapter. | |
1448 | ||
1449 | For the latest Intel PRO/100 network driver for Linux, see: | |
1450 | ||
1451 | <http://appsr.intel.com/scripts-df/support_intel.asp> | |
1452 | ||
1453 | More specific information on configuring the driver is in | |
1454 | <file:Documentation/networking/e100.txt>. | |
1455 | ||
1456 | To compile this driver as a module, choose M here and read | |
1457 | <file:Documentation/networking/net-modules.txt>. The module | |
1458 | will be called e100. | |
1459 | ||
1460 | config LNE390 | |
1461 | tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)" | |
1462 | depends on NET_PCI && EISA && EXPERIMENTAL | |
1463 | select CRC32 | |
1464 | help | |
1465 | If you have a network (Ethernet) card of this type, say Y and read | |
1466 | the Ethernet-HOWTO, available from | |
1467 | <http://www.tldp.org/docs.html#howto>. | |
1468 | ||
1469 | To compile this driver as a module, choose M here and read | |
1470 | <file:Documentation/networking/net-modules.txt>. The module | |
1471 | will be called lne390. | |
1472 | ||
1473 | config FEALNX | |
1474 | tristate "Myson MTD-8xx PCI Ethernet support" | |
1475 | depends on NET_PCI && PCI | |
1476 | select CRC32 | |
1477 | select MII | |
1478 | help | |
1479 | Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet | |
1480 | cards. Specifications and data at | |
1481 | <http://www.myson.com.hk/mtd/datasheet/>. | |
1482 | ||
1483 | config NATSEMI | |
1484 | tristate "National Semiconductor DP8381x series PCI Ethernet support" | |
1485 | depends on NET_PCI && PCI | |
1486 | select CRC32 | |
1487 | help | |
1488 | This driver is for the National Semiconductor DP83810 series, | |
1489 | which is used in cards from PureData, NetGear, Linksys | |
1490 | and others, including the 83815 chip. | |
1491 | More specific information and updates are available from | |
1492 | <http://www.scyld.com/network/natsemi.html>. | |
1493 | ||
1494 | config NE2K_PCI | |
1495 | tristate "PCI NE2000 and clones support (see help)" | |
1496 | depends on NET_PCI && PCI | |
1497 | select CRC32 | |
1498 | ---help--- | |
1499 | This driver is for NE2000 compatible PCI cards. It will not work | |
1500 | with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 | |
1501 | support" below). If you have a PCI NE2000 network (Ethernet) card, | |
1502 | say Y and read the Ethernet-HOWTO, available from | |
1503 | <http://www.tldp.org/docs.html#howto>. | |
1504 | ||
1505 | This driver also works for the following NE2000 clone cards: | |
1506 | RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 | |
1507 | NetVin NV5000SC Via 86C926 SureCom NE34 Winbond | |
1508 | Holtek HT80232 Holtek HT80229 | |
1509 | ||
1510 | To compile this driver as a module, choose M here and read | |
1511 | <file:Documentation/networking/net-modules.txt>. The module | |
1512 | will be called ne2k-pci. | |
1513 | ||
1514 | config NE3210 | |
1515 | tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)" | |
1516 | depends on NET_PCI && EISA && EXPERIMENTAL | |
1517 | select CRC32 | |
1518 | ---help--- | |
1519 | If you have a network (Ethernet) card of this type, say Y and read | |
1520 | the Ethernet-HOWTO, available from | |
1521 | <http://www.tldp.org/docs.html#howto>. Note that this driver | |
1522 | will NOT WORK for NE3200 cards as they are completely different. | |
1523 | ||
1524 | To compile this driver as a module, choose M here and read | |
1525 | <file:Documentation/networking/net-modules.txt>. The module | |
1526 | will be called ne3210. | |
1527 | ||
1528 | config ES3210 | |
1529 | tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)" | |
1530 | depends on NET_PCI && EISA && EXPERIMENTAL | |
1531 | select CRC32 | |
1532 | help | |
1533 | If you have a network (Ethernet) card of this type, say Y and read | |
1534 | the Ethernet-HOWTO, available from | |
1535 | <http://www.tldp.org/docs.html#howto>. | |
1536 | ||
1537 | To compile this driver as a module, choose M here and read | |
1538 | <file:Documentation/networking/net-modules.txt>. The module | |
1539 | will be called es3210. | |
1540 | ||
1541 | config 8139CP | |
1542 | tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)" | |
1543 | depends on NET_PCI && PCI && EXPERIMENTAL | |
1544 | select CRC32 | |
1545 | select MII | |
1546 | help | |
1547 | This is a driver for the Fast Ethernet PCI network cards based on | |
1548 | the RTL8139C+ chips. If you have one of those, say Y and read | |
1549 | the Ethernet-HOWTO, available from | |
1550 | <http://www.tldp.org/docs.html#howto>. | |
1551 | ||
1552 | To compile this driver as a module, choose M here: the module | |
1553 | will be called 8139cp. This is recommended. | |
1554 | ||
1555 | config 8139TOO | |
f04e3f09 | 1556 | tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support" |
1da177e4 LT |
1557 | depends on NET_PCI && PCI |
1558 | select CRC32 | |
1559 | select MII | |
1560 | ---help--- | |
1561 | This is a driver for the Fast Ethernet PCI network cards based on | |
f04e3f09 AB |
1562 | the RTL 8129/8130/8139 chips. If you have one of those, say Y and |
1563 | read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>. | |
1da177e4 LT |
1564 | |
1565 | To compile this driver as a module, choose M here: the module | |
1566 | will be called 8139too. This is recommended. | |
1567 | ||
1568 | config 8139TOO_PIO | |
1569 | bool "Use PIO instead of MMIO" | |
1570 | default y | |
1571 | depends on 8139TOO | |
1572 | help | |
1573 | This instructs the driver to use programmed I/O ports (PIO) instead | |
1574 | of PCI shared memory (MMIO). This can possibly solve some problems | |
1575 | in case your mainboard has memory consistency issues. If unsure, | |
1576 | say N. | |
1577 | ||
1578 | config 8139TOO_TUNE_TWISTER | |
1579 | bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)" | |
1580 | depends on 8139TOO | |
1581 | help | |
1582 | This implements a function which might come in handy in case you | |
1583 | are using low quality on long cabling. It is required for RealTek | |
1584 | RTL-8139 revision K boards, and totally unused otherwise. It tries | |
1585 | to match the transceiver to the cable characteristics. This is | |
1586 | experimental since hardly documented by the manufacturer. | |
1587 | If unsure, say Y. | |
1588 | ||
1589 | config 8139TOO_8129 | |
1590 | bool "Support for older RTL-8129/8130 boards" | |
1591 | depends on 8139TOO | |
1592 | help | |
1593 | This enables support for the older and uncommon RTL-8129 and | |
1594 | RTL-8130 chips, which support MII via an external transceiver, | |
1595 | instead of an internal one. Disabling this option will save some | |
1596 | memory by making the code size smaller. If unsure, say Y. | |
1597 | ||
1598 | config 8139_OLD_RX_RESET | |
1599 | bool "Use older RX-reset method" | |
1600 | depends on 8139TOO | |
1601 | help | |
1602 | The 8139too driver was recently updated to contain a more rapid | |
1603 | reset sequence, in the face of severe receive errors. This "new" | |
1604 | RX-reset method should be adequate for all boards. But if you | |
1605 | experience problems, you can enable this option to restore the | |
1606 | old RX-reset behavior. If unsure, say N. | |
1607 | ||
1608 | config SIS900 | |
1609 | tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" | |
1610 | depends on NET_PCI && PCI | |
1611 | select CRC32 | |
6da0f685 | 1612 | select MII |
1da177e4 LT |
1613 | ---help--- |
1614 | This is a driver for the Fast Ethernet PCI network cards based on | |
1615 | the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in | |
1616 | SiS 630 and SiS 540 chipsets. If you have one of those, say Y and | |
1617 | read the Ethernet-HOWTO, available at | |
1618 | <http://www.tldp.org/docs.html#howto>. Please read | |
1619 | <file:Documentation/networking/sis900.txt> and comments at the | |
1620 | beginning of <file:drivers/net/sis900.c> for more information. | |
1621 | ||
1622 | This driver also supports AMD 79C901 HomePNA so that you can use | |
1623 | your phone line as a network cable. | |
1624 | ||
1625 | To compile this driver as a module, choose M here: the module | |
1626 | will be called sis900. This is recommended. | |
1627 | ||
1628 | config EPIC100 | |
1629 | tristate "SMC EtherPower II" | |
1630 | depends on NET_PCI && PCI | |
1631 | select CRC32 | |
1632 | select MII | |
1633 | help | |
1634 | This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, | |
1635 | which is based on the SMC83c17x (EPIC/100). | |
1636 | More specific information and updates are available from | |
1637 | <http://www.scyld.com/network/epic100.html>. | |
1638 | ||
1639 | config SUNDANCE | |
1640 | tristate "Sundance Alta support" | |
1641 | depends on NET_PCI && PCI | |
1642 | select CRC32 | |
1643 | select MII | |
1644 | help | |
1645 | This driver is for the Sundance "Alta" chip. | |
1646 | More specific information and updates are available from | |
1647 | <http://www.scyld.com/network/sundance.html>. | |
1648 | ||
1649 | config SUNDANCE_MMIO | |
1650 | bool "Use MMIO instead of PIO" | |
1651 | depends on SUNDANCE | |
1652 | help | |
1653 | Enable memory-mapped I/O for interaction with Sundance NIC registers. | |
1654 | Do NOT enable this by default, PIO (enabled when MMIO is disabled) | |
1655 | is known to solve bugs on certain chips. | |
1656 | ||
1657 | If unsure, say N. | |
1658 | ||
1659 | config TLAN | |
1660 | tristate "TI ThunderLAN support" | |
1661 | depends on NET_PCI && (PCI || EISA) && !64BIT | |
1662 | ---help--- | |
1663 | If you have a PCI Ethernet network card based on the ThunderLAN chip | |
1664 | which is supported by this driver, say Y and read the | |
1665 | Ethernet-HOWTO, available from | |
1666 | <http://www.tldp.org/docs.html#howto>. | |
1667 | ||
1668 | Devices currently supported by this driver are Compaq Netelligent, | |
1669 | Compaq NetFlex and Olicom cards. Please read the file | |
1670 | <file:Documentation/networking/tlan.txt> for more details. | |
1671 | ||
1672 | To compile this driver as a module, choose M here and read | |
1673 | <file:Documentation/networking/net-modules.txt>. The module | |
1674 | will be called tlan. | |
1675 | ||
1676 | Please email feedback to <torben.mathiasen@compaq.com>. | |
1677 | ||
1678 | config VIA_RHINE | |
1679 | tristate "VIA Rhine support" | |
1680 | depends on NET_PCI && PCI | |
1681 | select CRC32 | |
1682 | select MII | |
1683 | help | |
1684 | If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A), | |
1685 | Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type | |
1686 | Ethernet functions can also be found integrated on South Bridges | |
1687 | (e.g. VT8235). | |
1688 | ||
1689 | To compile this driver as a module, choose M here. The module | |
1690 | will be called via-rhine. | |
1691 | ||
1692 | config VIA_RHINE_MMIO | |
1693 | bool "Use MMIO instead of PIO" | |
1694 | depends on VIA_RHINE | |
1695 | help | |
1696 | This instructs the driver to use PCI shared memory (MMIO) instead of | |
1697 | programmed I/O ports (PIO). Enabling this gives an improvement in | |
1698 | processing time in parts of the driver. | |
1699 | ||
1700 | If unsure, say Y. | |
1701 | ||
1702 | config LAN_SAA9730 | |
1703 | bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)" | |
1704 | depends on NET_PCI && EXPERIMENTAL && MIPS | |
1705 | help | |
1706 | The SAA9730 is a combined multimedia and peripheral controller used | |
1707 | in thin clients, Internet access terminals, and diskless | |
1708 | workstations. | |
1709 | See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>. | |
1710 | ||
1711 | config NET_POCKET | |
1712 | bool "Pocket and portable adapters" | |
32fa2bfc | 1713 | depends on NET_ETHERNET && PARPORT |
1da177e4 LT |
1714 | ---help--- |
1715 | Cute little network (Ethernet) devices which attach to the parallel | |
1716 | port ("pocket adapters"), commonly used with laptops. If you have | |
1717 | one of those, say Y and read the Ethernet-HOWTO, available from | |
1718 | <http://www.tldp.org/docs.html#howto>. | |
1719 | ||
1720 | If you want to plug a network (or some other) card into the PCMCIA | |
1721 | (or PC-card) slot of your laptop instead (PCMCIA is the standard for | |
1722 | credit card size extension cards used by all modern laptops), you | |
1723 | need the pcmcia-cs package (location contained in the file | |
1724 | <file:Documentation/Changes>) and you can say N here. | |
1725 | ||
1726 | Laptop users should read the Linux Laptop home page at | |
1727 | <http://www.linux-on-laptops.com/> or | |
1728 | Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>. | |
1729 | ||
1730 | Note that the answer to this question doesn't directly affect the | |
1731 | kernel: saying N will just cause the configurator to skip all | |
1732 | the questions about this class of network devices. If you say Y, you | |
1733 | will be asked for your specific device in the following questions. | |
1734 | ||
1735 | config ATP | |
1736 | tristate "AT-LAN-TEC/RealTek pocket adapter support" | |
32fa2bfc | 1737 | depends on NET_POCKET && PARPORT && X86 |
1da177e4 LT |
1738 | select CRC32 |
1739 | ---help--- | |
1740 | This is a network (Ethernet) device which attaches to your parallel | |
1741 | port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO, | |
1742 | available from <http://www.tldp.org/docs.html#howto>, if you | |
1743 | want to use this. If you intend to use this driver, you should have | |
1744 | said N to the "Parallel printer support", because the two drivers | |
1745 | don't like each other. | |
1746 | ||
1747 | To compile this driver as a module, choose M here: the module | |
1748 | will be called atp. | |
1749 | ||
1750 | config DE600 | |
1751 | tristate "D-Link DE600 pocket adapter support" | |
32fa2bfc | 1752 | depends on NET_POCKET && PARPORT |
1da177e4 LT |
1753 | ---help--- |
1754 | This is a network (Ethernet) device which attaches to your parallel | |
1755 | port. Read <file:Documentation/networking/DLINK.txt> as well as the | |
1756 | Ethernet-HOWTO, available from | |
1757 | <http://www.tldp.org/docs.html#howto>, if you want to use | |
1758 | this. It is possible to have several devices share a single parallel | |
1759 | port and it is safe to compile the corresponding drivers into the | |
1760 | kernel. | |
1761 | ||
1762 | To compile this driver as a module, choose M here: the module | |
1763 | will be called de600. | |
1764 | ||
1765 | config DE620 | |
1766 | tristate "D-Link DE620 pocket adapter support" | |
32fa2bfc | 1767 | depends on NET_POCKET && PARPORT |
1da177e4 LT |
1768 | ---help--- |
1769 | This is a network (Ethernet) device which attaches to your parallel | |
1770 | port. Read <file:Documentation/networking/DLINK.txt> as well as the | |
1771 | Ethernet-HOWTO, available from | |
1772 | <http://www.tldp.org/docs.html#howto>, if you want to use | |
1773 | this. It is possible to have several devices share a single parallel | |
1774 | port and it is safe to compile the corresponding drivers into the | |
1775 | kernel. | |
1776 | ||
1777 | To compile this driver as a module, choose M here: the module | |
1778 | will be called de620. | |
1779 | ||
1780 | config SGISEEQ | |
1781 | tristate "SGI Seeq ethernet controller support" | |
1782 | depends on NET_ETHERNET && SGI_IP22 | |
1783 | help | |
1784 | Say Y here if you have an Seeq based Ethernet network card. This is | |
1785 | used in many Silicon Graphics machines. | |
1786 | ||
1787 | config DECLANCE | |
1788 | tristate "DEC LANCE ethernet controller support" | |
1789 | depends on NET_ETHERNET && MACH_DECSTATION | |
1790 | select CRC32 | |
1791 | help | |
1792 | This driver is for the series of Ethernet controllers produced by | |
1793 | DEC (now Compaq) based on the AMD Lance chipset, including the | |
1794 | DEPCA series. (This chipset is better known via the NE2100 cards.) | |
1795 | ||
1796 | config 68360_ENET | |
1797 | bool "Motorola 68360 ethernet controller" | |
1798 | depends on M68360 | |
1799 | help | |
1800 | Say Y here if you want to use the built-in ethernet controller of | |
1801 | the Motorola 68360 processor. | |
1802 | ||
1803 | config FEC | |
2af6921f | 1804 | bool "FEC ethernet controller (of ColdFire CPUs)" |
892b6252 | 1805 | depends on M523x || M527x || M5272 || M528x || M520x |
1da177e4 LT |
1806 | help |
1807 | Say Y here if you want to use the built-in 10/100 Fast ethernet | |
2af6921f GU |
1808 | controller on some Motorola ColdFire processors. |
1809 | ||
1810 | config FEC2 | |
1811 | bool "Second FEC ethernet controller (on some ColdFire CPUs)" | |
1812 | depends on FEC | |
1813 | help | |
1814 | Say Y here if you want to use the second built-in 10/100 Fast | |
1815 | ethernet controller on some Motorola ColdFire processors. | |
1da177e4 LT |
1816 | |
1817 | config NE_H8300 | |
1818 | tristate "NE2000 compatible support for H8/300" | |
1819 | depends on H8300 && NET_ETHERNET | |
1820 | help | |
1821 | Say Y here if you want to use the NE2000 compatible | |
1822 | controller on the Renesas H8/300 processor. | |
1823 | ||
1824 | source "drivers/net/fec_8xx/Kconfig" | |
48257c4f | 1825 | source "drivers/net/fs_enet/Kconfig" |
1da177e4 LT |
1826 | |
1827 | endmenu | |
1828 | ||
1829 | # | |
1830 | # Gigabit Ethernet | |
1831 | # | |
1832 | ||
1833 | menu "Ethernet (1000 Mbit)" | |
cbcd2a4c | 1834 | depends on !UML |
1da177e4 LT |
1835 | |
1836 | config ACENIC | |
1837 | tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" | |
1838 | depends on PCI | |
1839 | ---help--- | |
1840 | Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear | |
1841 | GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet | |
1842 | adapter. The driver allows for using the Jumbo Frame option (9000 | |
1843 | bytes/frame) however it requires that your switches can handle this | |
1844 | as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig | |
1845 | line. | |
1846 | ||
1847 | To compile this driver as a module, choose M here: the | |
1848 | module will be called acenic. | |
1849 | ||
1850 | config ACENIC_OMIT_TIGON_I | |
1851 | bool "Omit support for old Tigon I based AceNICs" | |
1852 | depends on ACENIC | |
1853 | help | |
1854 | Say Y here if you only have Tigon II based AceNICs and want to leave | |
1855 | out support for the older Tigon I based cards which are no longer | |
1856 | being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B | |
1857 | version)). This will reduce the size of the driver object by | |
1858 | app. 100KB. If you are not sure whether your card is a Tigon I or a | |
1859 | Tigon II, say N here. | |
1860 | ||
1861 | The safe and default value for this is N. | |
1862 | ||
1863 | config DL2K | |
1864 | tristate "D-Link DL2000-based Gigabit Ethernet support" | |
1865 | depends on PCI | |
1866 | select CRC32 | |
1867 | help | |
1868 | This driver supports D-Link 2000-based gigabit ethernet cards, which | |
1869 | includes | |
1870 | D-Link DGE-550T Gigabit Ethernet Adapter. | |
1871 | D-Link DL2000-based Gigabit Ethernet Adapter. | |
1872 | ||
1873 | To compile this driver as a module, choose M here: the | |
1874 | module will be called dl2k. | |
1875 | ||
1876 | config E1000 | |
1877 | tristate "Intel(R) PRO/1000 Gigabit Ethernet support" | |
1878 | depends on PCI | |
1879 | ---help--- | |
1880 | This driver supports Intel(R) PRO/1000 gigabit ethernet family of | |
1881 | adapters. For more information on how to identify your adapter, go | |
1882 | to the Adapter & Driver ID Guide at: | |
1883 | ||
1884 | <http://support.intel.com/support/network/adapter/pro100/21397.htm> | |
1885 | ||
1886 | For general information and support, go to the Intel support | |
1887 | website at: | |
1888 | ||
1889 | <http://support.intel.com> | |
1890 | ||
1891 | More specific information on configuring the driver is in | |
1892 | <file:Documentation/networking/e1000.txt>. | |
1893 | ||
1894 | To compile this driver as a module, choose M here and read | |
1895 | <file:Documentation/networking/net-modules.txt>. The module | |
1896 | will be called e1000. | |
1897 | ||
1898 | config E1000_NAPI | |
1899 | bool "Use Rx Polling (NAPI)" | |
1900 | depends on E1000 | |
1901 | help | |
1902 | NAPI is a new driver API designed to reduce CPU and interrupt load | |
1903 | when the driver is receiving lots of packets from the card. It is | |
1904 | still somewhat experimental and thus not yet enabled by default. | |
1905 | ||
1906 | If your estimated Rx load is 10kpps or more, or if the card will be | |
1907 | deployed on potentially unfriendly networks (e.g. in a firewall), | |
1908 | then say Y here. | |
1909 | ||
1910 | See <file:Documentation/networking/NAPI_HOWTO.txt> for more | |
1911 | information. | |
1912 | ||
1913 | If in doubt, say N. | |
1914 | ||
35ec56bb JB |
1915 | config E1000_DISABLE_PACKET_SPLIT |
1916 | bool "Disable Packet Split for PCI express adapters" | |
1917 | depends on E1000 | |
1918 | help | |
1919 | Say Y here if you want to use the legacy receive path for PCI express | |
1920 | hadware. | |
1921 | ||
1922 | If in doubt, say N. | |
1923 | ||
15d014d1 LB |
1924 | source "drivers/net/ixp2000/Kconfig" |
1925 | ||
1da177e4 LT |
1926 | config MYRI_SBUS |
1927 | tristate "MyriCOM Gigabit Ethernet support" | |
1928 | depends on SBUS | |
1929 | help | |
1930 | This driver supports MyriCOM Sbus gigabit Ethernet cards. | |
1931 | ||
1932 | To compile this driver as a module, choose M here: the module | |
1933 | will be called myri_sbus. This is recommended. | |
1934 | ||
1935 | config NS83820 | |
1936 | tristate "National Semiconduct DP83820 support" | |
1937 | depends on PCI | |
1938 | help | |
1939 | This is a driver for the National Semiconductor DP83820 series | |
1940 | of gigabit ethernet MACs. Cards using this chipset include | |
1941 | the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX, | |
1942 | SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of | |
1943 | zero copy. | |
1944 | ||
1945 | config HAMACHI | |
1946 | tristate "Packet Engines Hamachi GNIC-II support" | |
1947 | depends on PCI | |
1948 | select MII | |
1949 | help | |
1950 | If you have a Gigabit Ethernet card of this type, say Y and read | |
1951 | the Ethernet-HOWTO, available from | |
1952 | <http://www.tldp.org/docs.html#howto>. | |
1953 | ||
1954 | To compile this driver as a module, choose M here and read | |
1955 | <file:Documentation/networking/net-modules.txt>. The module will be | |
1956 | called hamachi. | |
1957 | ||
1958 | config YELLOWFIN | |
1959 | tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)" | |
1960 | depends on PCI && EXPERIMENTAL | |
1961 | select CRC32 | |
1962 | ---help--- | |
1963 | Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet | |
1964 | adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is | |
1965 | used by the Beowulf Linux cluster project. See | |
1966 | <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more | |
1967 | information about this driver in particular and Beowulf in general. | |
1968 | ||
1969 | To compile this driver as a module, choose M here: the module | |
1970 | will be called yellowfin. This is recommended. | |
1971 | ||
1972 | config R8169 | |
1973 | tristate "Realtek 8169 gigabit ethernet support" | |
1974 | depends on PCI | |
1975 | select CRC32 | |
1976 | ---help--- | |
1977 | Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter. | |
1978 | ||
1979 | To compile this driver as a module, choose M here: the module | |
1980 | will be called r8169. This is recommended. | |
1981 | ||
1982 | config R8169_NAPI | |
1983 | bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)" | |
1984 | depends on R8169 && EXPERIMENTAL | |
1985 | help | |
1986 | NAPI is a new driver API designed to reduce CPU and interrupt load | |
1987 | when the driver is receiving lots of packets from the card. It is | |
1988 | still somewhat experimental and thus not yet enabled by default. | |
1989 | ||
1990 | If your estimated Rx load is 10kpps or more, or if the card will be | |
1991 | deployed on potentially unfriendly networks (e.g. in a firewall), | |
1992 | then say Y here. | |
1993 | ||
1994 | See <file:Documentation/networking/NAPI_HOWTO.txt> for more | |
1995 | information. | |
1996 | ||
1997 | If in doubt, say N. | |
1998 | ||
1999 | config R8169_VLAN | |
2000 | bool "VLAN support" | |
2001 | depends on R8169 && VLAN_8021Q | |
2002 | ---help--- | |
2003 | Say Y here for the r8169 driver to support the functions required | |
2004 | by the kernel 802.1Q code. | |
2005 | ||
2006 | If in doubt, say Y. | |
2007 | ||
890e8d0a | 2008 | config SIS190 |
e797637f | 2009 | tristate "SiS190/SiS191 gigabit ethernet support" |
e9985d53 AB |
2010 | depends on PCI |
2011 | select CRC32 | |
2012 | select MII | |
2013 | ---help--- | |
e797637f FR |
2014 | Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or |
2015 | a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to | |
2016 | appear in lan on motherboard designs which are based on SiS 965 | |
2017 | and SiS 966 south bridge. | |
e9985d53 AB |
2018 | |
2019 | To compile this driver as a module, choose M here: the module | |
2020 | will be called sis190. This is recommended. | |
890e8d0a | 2021 | |
baef58b1 SH |
2022 | config SKGE |
2023 | tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)" | |
2024 | depends on PCI && EXPERIMENTAL | |
2025 | select CRC32 | |
2026 | ---help--- | |
2027 | This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx | |
2028 | and related Gigabit Ethernet adapters. It is a new smaller driver | |
46a60f2d | 2029 | with better performance and more complete ethtool support. |
baef58b1 SH |
2030 | |
2031 | It does not support the link failover and network management | |
2032 | features that "portable" vendor supplied sk98lin driver does. | |
cd28ab6a | 2033 | |
c6f0d75a DD |
2034 | This driver supports adapters based on the original Yukon chipset: |
2035 | Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, | |
2036 | Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. | |
2037 | ||
2038 | It does not support the newer Yukon2 chipset: a separate driver, | |
2039 | sky2, is provided for Yukon2-based adapters. | |
2040 | ||
2041 | To compile this driver as a module, choose M here: the module | |
2042 | will be called skge. This is recommended. | |
cd28ab6a SH |
2043 | |
2044 | config SKY2 | |
2045 | tristate "SysKonnect Yukon2 support (EXPERIMENTAL)" | |
2046 | depends on PCI && EXPERIMENTAL | |
2047 | select CRC32 | |
2048 | ---help--- | |
c6f0d75a DD |
2049 | This driver supports Gigabit Ethernet adapters based on the the |
2050 | Marvell Yukon 2 chipset: | |
2051 | Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ | |
2052 | 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 | |
2053 | ||
2054 | This driver does not support the original Yukon chipset: a seperate | |
2055 | driver, skge, is provided for Yukon-based adapters. | |
cd28ab6a SH |
2056 | |
2057 | To compile this driver as a module, choose M here: the module | |
2058 | will be called sky2. This is recommended. | |
2059 | ||
1da177e4 LT |
2060 | config SK98LIN |
2061 | tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support" | |
2062 | depends on PCI | |
2063 | ---help--- | |
2064 | Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx | |
c6f0d75a DD |
2065 | compliant Gigabit Ethernet Adapter. |
2066 | ||
2067 | This driver supports the original Yukon chipset. A cleaner driver is | |
2068 | also available (skge) which seems to work better than this one. | |
2069 | ||
2070 | This driver does not support the newer Yukon2 chipset. A seperate | |
2071 | driver, sky2, is provided to support Yukon2-based adapters. | |
2072 | ||
2073 | The following adapters are supported by this driver: | |
1da177e4 LT |
2074 | - 3Com 3C940 Gigabit LOM Ethernet Adapter |
2075 | - 3Com 3C941 Gigabit LOM Ethernet Adapter | |
2076 | - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter | |
2077 | - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter | |
2078 | - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter | |
2079 | - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter | |
2080 | - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter | |
2081 | - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter | |
2082 | - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter | |
2083 | - Allied Telesyn AT-2971T Gigabit Ethernet Adapter | |
2084 | - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45 | |
1da177e4 LT |
2085 | - EG1032 v2 Instant Gigabit Network Adapter |
2086 | - EG1064 v2 Instant Gigabit Network Adapter | |
2087 | - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit) | |
2088 | - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron) | |
2089 | - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus) | |
2090 | - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS) | |
2091 | - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox) | |
2092 | - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn) | |
2093 | - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte) | |
2094 | - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill) | |
2095 | - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel) | |
2096 | - Marvell RDK-8001 Adapter | |
2097 | - Marvell RDK-8002 Adapter | |
2098 | - Marvell RDK-8003 Adapter | |
2099 | - Marvell RDK-8004 Adapter | |
2100 | - Marvell RDK-8006 Adapter | |
2101 | - Marvell RDK-8007 Adapter | |
2102 | - Marvell RDK-8008 Adapter | |
2103 | - Marvell RDK-8009 Adapter | |
2104 | - Marvell RDK-8010 Adapter | |
2105 | - Marvell RDK-8011 Adapter | |
2106 | - Marvell RDK-8012 Adapter | |
2107 | - Marvell RDK-8052 Adapter | |
2108 | - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit) | |
2109 | - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit) | |
2110 | - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L) | |
2111 | - SK-9521 10/100/1000Base-T Adapter | |
2112 | - SK-9521 V2.0 10/100/1000Base-T Adapter | |
2113 | - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T) | |
2114 | - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter | |
2115 | - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link) | |
2116 | - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX) | |
2117 | - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter | |
2118 | - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link) | |
2119 | - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX) | |
2120 | - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter | |
2121 | - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link) | |
2122 | - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter | |
2123 | - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition) | |
2124 | - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter | |
2125 | - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link) | |
2126 | - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX) | |
2127 | - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter | |
2128 | - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) | |
2129 | - SMC EZ Card 1000 (SMC9452TXV.2) | |
2130 | ||
2131 | The adapters support Jumbo Frames. | |
2132 | The dual link adapters support link-failover and dual port features. | |
2133 | Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support | |
2134 | the scatter-gather functionality with sendfile(). Please refer to | |
2135 | <file:Documentation/networking/sk98lin.txt> for more information about | |
2136 | optional driver parameters. | |
2137 | Questions concerning this driver may be addressed to: | |
2138 | <linux@syskonnect.de> | |
2139 | ||
2140 | If you want to compile this driver as a module ( = code which can be | |
2141 | inserted in and removed from the running kernel whenever you want), | |
2142 | say M here and read <file:Documentation/kbuild/modules.txt>. The module will | |
2143 | be called sk98lin. This is recommended. | |
2144 | ||
2145 | config VIA_VELOCITY | |
2146 | tristate "VIA Velocity support" | |
2147 | depends on NET_PCI && PCI | |
2148 | select CRC32 | |
2149 | select CRC_CCITT | |
2150 | select MII | |
2151 | help | |
2152 | If you have a VIA "Velocity" based network card say Y here. | |
2153 | ||
2154 | To compile this driver as a module, choose M here. The module | |
2155 | will be called via-velocity. | |
2156 | ||
2157 | config TIGON3 | |
2158 | tristate "Broadcom Tigon3 support" | |
2159 | depends on PCI | |
2160 | help | |
2161 | This driver supports Broadcom Tigon3 based gigabit Ethernet cards. | |
2162 | ||
2163 | To compile this driver as a module, choose M here: the module | |
2164 | will be called tg3. This is recommended. | |
2165 | ||
b6016b76 MC |
2166 | config BNX2 |
2167 | tristate "Broadcom NetXtremeII support" | |
2168 | depends on PCI | |
2169 | help | |
2170 | This driver supports Broadcom NetXtremeII gigabit Ethernet cards. | |
2171 | ||
2172 | To compile this driver as a module, choose M here: the module | |
2173 | will be called bnx2. This is recommended. | |
2174 | ||
aaec0fab JO |
2175 | config SPIDER_NET |
2176 | tristate "Spider Gigabit Ethernet driver" | |
b35de2eb | 2177 | depends on PCI && PPC_CELL |
aaec0fab JO |
2178 | help |
2179 | This driver supports the Gigabit Ethernet chips present on the | |
2180 | Cell Processor-Based Blades from IBM. | |
2181 | ||
1da177e4 LT |
2182 | config GIANFAR |
2183 | tristate "Gianfar Ethernet" | |
2184 | depends on 85xx || 83xx | |
bb40dcbb | 2185 | select PHYLIB |
1da177e4 LT |
2186 | help |
2187 | This driver supports the Gigabit TSEC on the MPC85xx | |
2188 | family of chips, and the FEC on the 8540 | |
2189 | ||
2190 | config GFAR_NAPI | |
2191 | bool "NAPI Support" | |
2192 | depends on GIANFAR | |
2193 | ||
2194 | config MV643XX_ETH | |
2195 | tristate "MV-643XX Ethernet support" | |
16b81757 | 2196 | depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM |
1da177e4 LT |
2197 | help |
2198 | This driver supports the gigabit Ethernet on the Marvell MV643XX | |
2199 | chipset which is used in the Momenco Ocelot C and Jaguar ATX and | |
2200 | Pegasos II, amongst other PPC and MIPS boards. | |
2201 | ||
2202 | config MV643XX_ETH_0 | |
2203 | bool "MV-643XX Port 0" | |
2204 | depends on MV643XX_ETH | |
2205 | help | |
2206 | This enables support for Port 0 of the Marvell MV643XX Gigabit | |
2207 | Ethernet. | |
2208 | ||
2209 | config MV643XX_ETH_1 | |
2210 | bool "MV-643XX Port 1" | |
2211 | depends on MV643XX_ETH | |
2212 | help | |
2213 | This enables support for Port 1 of the Marvell MV643XX Gigabit | |
2214 | Ethernet. | |
2215 | ||
2216 | config MV643XX_ETH_2 | |
2217 | bool "MV-643XX Port 2" | |
2218 | depends on MV643XX_ETH | |
2219 | help | |
2220 | This enables support for Port 2 of the Marvell MV643XX Gigabit | |
2221 | Ethernet. | |
2222 | ||
2223 | endmenu | |
2224 | ||
2225 | # | |
2226 | # 10 Gigabit Ethernet | |
2227 | # | |
2228 | ||
2229 | menu "Ethernet (10000 Mbit)" | |
cbcd2a4c | 2230 | depends on !UML |
1da177e4 | 2231 | |
8199d3a7 CL |
2232 | config CHELSIO_T1 |
2233 | tristate "Chelsio 10Gb Ethernet support" | |
2234 | depends on PCI | |
2235 | help | |
2236 | This driver supports Chelsio N110 and N210 models 10Gb Ethernet | |
2237 | cards. More information about adapter features and performance | |
2238 | tuning is in <file:Documentation/networking/cxgb.txt>. | |
2239 | ||
2240 | For general information about Chelsio and our products, visit | |
2241 | our website at <http://www.chelsio.com>. | |
2242 | ||
2243 | For customer support, please visit our customer support page at | |
2244 | <http://www.chelsio.com/support.htm>. | |
2245 | ||
2246 | Please send feedback to <linux-bugs@chelsio.com>. | |
2247 | ||
2248 | To compile this driver as a module, choose M here: the module | |
2249 | will be called cxgb. | |
2250 | ||
1da177e4 LT |
2251 | config IXGB |
2252 | tristate "Intel(R) PRO/10GbE support" | |
2253 | depends on PCI | |
2254 | ---help--- | |
2255 | This driver supports Intel(R) PRO/10GbE family of | |
2256 | adapters. For more information on how to identify your adapter, go | |
2257 | to the Adapter & Driver ID Guide at: | |
2258 | ||
2259 | <http://support.intel.com/support/network/adapter/pro100/21397.htm> | |
2260 | ||
2261 | For general information and support, go to the Intel support | |
2262 | website at: | |
2263 | ||
2264 | <http://support.intel.com> | |
2265 | ||
2266 | More specific information on configuring the driver is in | |
2267 | <file:Documentation/networking/ixgb.txt>. | |
2268 | ||
2269 | To compile this driver as a module, choose M here and read | |
2270 | <file:Documentation/networking/net-modules.txt>. The module | |
2271 | will be called ixgb. | |
2272 | ||
2273 | config IXGB_NAPI | |
2274 | bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" | |
2275 | depends on IXGB && EXPERIMENTAL | |
2276 | help | |
2277 | NAPI is a new driver API designed to reduce CPU and interrupt load | |
2278 | when the driver is receiving lots of packets from the card. It is | |
2279 | still somewhat experimental and thus not yet enabled by default. | |
2280 | ||
2281 | If your estimated Rx load is 10kpps or more, or if the card will be | |
2282 | deployed on potentially unfriendly networks (e.g. in a firewall), | |
2283 | then say Y here. | |
2284 | ||
2285 | See <file:Documentation/networking/NAPI_HOWTO.txt> for more | |
2286 | information. | |
2287 | ||
2288 | If in doubt, say N. | |
2289 | ||
2290 | config S2IO | |
2291 | tristate "S2IO 10Gbe XFrame NIC" | |
2292 | depends on PCI | |
2293 | ---help--- | |
2294 | This driver supports the 10Gbe XFrame NIC of S2IO. | |
9eb343ae AM |
2295 | More specific information on configuring the driver is in |
2296 | <file:Documentation/networking/s2io.txt>. | |
1da177e4 LT |
2297 | |
2298 | config S2IO_NAPI | |
2299 | bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" | |
2300 | depends on S2IO && EXPERIMENTAL | |
2301 | help | |
2302 | NAPI is a new driver API designed to reduce CPU and interrupt load | |
2303 | when the driver is receiving lots of packets from the card. It is | |
2304 | still somewhat experimental and thus not yet enabled by default. | |
2305 | ||
2306 | If your estimated Rx load is 10kpps or more, or if the card will be | |
2307 | deployed on potentially unfriendly networks (e.g. in a firewall), | |
2308 | then say Y here. | |
2309 | ||
2310 | See <file:Documentation/networking/NAPI_HOWTO.txt> for more | |
2311 | information. | |
2312 | ||
2313 | If in doubt, say N. | |
2314 | ||
1da177e4 LT |
2315 | endmenu |
2316 | ||
2317 | if !UML | |
2318 | source "drivers/net/tokenring/Kconfig" | |
2319 | ||
2320 | source "drivers/net/wireless/Kconfig" | |
2321 | ||
2322 | source "drivers/net/pcmcia/Kconfig" | |
2323 | endif | |
2324 | ||
2325 | source "drivers/net/wan/Kconfig" | |
2326 | ||
2327 | source "drivers/atm/Kconfig" | |
2328 | ||
2329 | source "drivers/s390/net/Kconfig" | |
2330 | ||
2331 | config ISERIES_VETH | |
2332 | tristate "iSeries Virtual Ethernet driver support" | |
cbcd2a4c | 2333 | depends on PPC_ISERIES |
1da177e4 | 2334 | |
f89efd52 MP |
2335 | config RIONET |
2336 | tristate "RapidIO Ethernet over messaging driver support" | |
2337 | depends on NETDEVICES && RAPIDIO | |
2338 | ||
2339 | config RIONET_TX_SIZE | |
2340 | int "Number of outbound queue entries" | |
2341 | depends on RIONET | |
2342 | default "128" | |
2343 | ||
2344 | config RIONET_RX_SIZE | |
2345 | int "Number of inbound queue entries" | |
2346 | depends on RIONET | |
2347 | default "128" | |
2348 | ||
1da177e4 LT |
2349 | config FDDI |
2350 | bool "FDDI driver support" | |
cbcd2a4c | 2351 | depends on (PCI || EISA) |
1da177e4 LT |
2352 | help |
2353 | Fiber Distributed Data Interface is a high speed local area network | |
2354 | design; essentially a replacement for high speed Ethernet. FDDI can | |
2355 | run over copper or fiber. If you are connected to such a network and | |
2356 | want a driver for the FDDI card in your computer, say Y here (and | |
2357 | then also Y to the driver for your FDDI card, below). Most people | |
2358 | will say N. | |
2359 | ||
2360 | config DEFXX | |
2361 | tristate "Digital DEFEA and DEFPA adapter support" | |
2362 | depends on FDDI && (PCI || EISA) | |
2363 | help | |
2364 | This is support for the DIGITAL series of EISA (DEFEA) and PCI | |
2365 | (DEFPA) controllers which can connect you to a local FDDI network. | |
2366 | ||
2367 | config SKFP | |
2368 | tristate "SysKonnect FDDI PCI support" | |
2369 | depends on FDDI && PCI | |
2370 | ---help--- | |
2371 | Say Y here if you have a SysKonnect FDDI PCI adapter. | |
2372 | The following adapters are supported by this driver: | |
2373 | - SK-5521 (SK-NET FDDI-UP) | |
2374 | - SK-5522 (SK-NET FDDI-UP DAS) | |
2375 | - SK-5541 (SK-NET FDDI-FP) | |
2376 | - SK-5543 (SK-NET FDDI-LP) | |
2377 | - SK-5544 (SK-NET FDDI-LP DAS) | |
2378 | - SK-5821 (SK-NET FDDI-UP64) | |
2379 | - SK-5822 (SK-NET FDDI-UP64 DAS) | |
2380 | - SK-5841 (SK-NET FDDI-FP64) | |
2381 | - SK-5843 (SK-NET FDDI-LP64) | |
2382 | - SK-5844 (SK-NET FDDI-LP64 DAS) | |
2383 | - Netelligent 100 FDDI DAS Fibre SC | |
2384 | - Netelligent 100 FDDI SAS Fibre SC | |
2385 | - Netelligent 100 FDDI DAS UTP | |
2386 | - Netelligent 100 FDDI SAS UTP | |
2387 | - Netelligent 100 FDDI SAS Fibre MIC | |
2388 | ||
2389 | Read <file:Documentation/networking/skfp.txt> for information about | |
2390 | the driver. | |
2391 | ||
2392 | Questions concerning this driver can be addressed to: | |
2393 | <linux@syskonnect.de> | |
2394 | ||
2395 | To compile this driver as a module, choose M here: the module | |
2396 | will be called skfp. This is recommended. | |
2397 | ||
2398 | config HIPPI | |
2399 | bool "HIPPI driver support (EXPERIMENTAL)" | |
cbcd2a4c | 2400 | depends on EXPERIMENTAL && INET && PCI |
1da177e4 LT |
2401 | help |
2402 | HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and | |
2403 | 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI | |
2404 | can run over copper (25m) or fiber (300m on multi-mode or 10km on | |
2405 | single-mode). HIPPI networks are commonly used for clusters and to | |
2406 | connect to super computers. If you are connected to a HIPPI network | |
2407 | and have a HIPPI network card in your computer that you want to use | |
2408 | under Linux, say Y here (you must also remember to enable the driver | |
2409 | for your HIPPI card below). Most people will say N here. | |
2410 | ||
2411 | config ROADRUNNER | |
2412 | tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)" | |
2413 | depends on HIPPI && PCI | |
2414 | help | |
2415 | Say Y here if this is your PCI HIPPI network card. | |
2416 | ||
2417 | To compile this driver as a module, choose M here: the module | |
2418 | will be called rrunner. If unsure, say N. | |
2419 | ||
2420 | config ROADRUNNER_LARGE_RINGS | |
2421 | bool "Use large TX/RX rings (EXPERIMENTAL)" | |
2422 | depends on ROADRUNNER | |
2423 | help | |
2424 | If you say Y here, the RoadRunner driver will preallocate up to 2 MB | |
2425 | of additional memory to allow for fastest operation, both for | |
2426 | transmitting and receiving. This memory cannot be used by any other | |
2427 | kernel code or by user space programs. Say Y here only if you have | |
2428 | the memory. | |
2429 | ||
2430 | config PLIP | |
2431 | tristate "PLIP (parallel port) support" | |
cbcd2a4c | 2432 | depends on PARPORT |
1da177e4 LT |
2433 | ---help--- |
2434 | PLIP (Parallel Line Internet Protocol) is used to create a | |
2435 | reasonably fast mini network consisting of two (or, rarely, more) | |
2436 | local machines. A PLIP link from a Linux box is a popular means to | |
2437 | install a Linux distribution on a machine which doesn't have a | |
2438 | CD-ROM drive (a minimal system has to be transferred with floppies | |
2439 | first). The kernels on both machines need to have this PLIP option | |
2440 | enabled for this to work. | |
2441 | ||
2442 | The PLIP driver has two modes, mode 0 and mode 1. The parallel | |
2443 | ports (the connectors at the computers with 25 holes) are connected | |
2444 | with "null printer" or "Turbo Laplink" cables which can transmit 4 | |
2445 | bits at a time (mode 0) or with special PLIP cables, to be used on | |
2446 | bidirectional parallel ports only, which can transmit 8 bits at a | |
2447 | time (mode 1); you can find the wiring of these cables in | |
2448 | <file:Documentation/networking/PLIP.txt>. The cables can be up to | |
2449 | 15m long. Mode 0 works also if one of the machines runs DOS/Windows | |
2450 | and has some PLIP software installed, e.g. the Crynwr PLIP packet | |
2451 | driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>) | |
2452 | and winsock or NCSA's telnet. | |
2453 | ||
2454 | If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well | |
2455 | as the NET-3-HOWTO, both available from | |
2456 | <http://www.tldp.org/docs.html#howto>. Note that the PLIP | |
2457 | protocol has been changed and this PLIP driver won't work together | |
2458 | with the PLIP support in Linux versions 1.0.x. This option enlarges | |
2459 | your kernel by about 8 KB. | |
2460 | ||
2461 | To compile this driver as a module, choose M here and read | |
2462 | <file:Documentation/networking/net-modules.txt>. The module will be | |
2463 | called plip. If unsure, say Y or M, in case you buy a laptop | |
2464 | later. | |
2465 | ||
2466 | config PPP | |
2467 | tristate "PPP (point-to-point protocol) support" | |
1da177e4 LT |
2468 | ---help--- |
2469 | PPP (Point to Point Protocol) is a newer and better SLIP. It serves | |
2470 | the same purpose: sending Internet traffic over telephone (and other | |
2471 | serial) lines. Ask your access provider if they support it, because | |
2472 | otherwise you can't use it; most Internet access providers these | |
2473 | days support PPP rather than SLIP. | |
2474 | ||
2475 | To use PPP, you need an additional program called pppd as described | |
2476 | in the PPP-HOWTO, available at | |
2477 | <http://www.tldp.org/docs.html#howto>. Make sure that you have | |
2478 | the version of pppd recommended in <file:Documentation/Changes>. | |
2479 | The PPP option enlarges your kernel by about 16 KB. | |
2480 | ||
2481 | There are actually two versions of PPP: the traditional PPP for | |
2482 | asynchronous lines, such as regular analog phone lines, and | |
2483 | synchronous PPP which can be used over digital ISDN lines for | |
2484 | example. If you want to use PPP over phone lines or other | |
2485 | asynchronous serial lines, you need to say Y (or M) here and also to | |
2486 | the next option, "PPP support for async serial ports". For PPP over | |
2487 | synchronous lines, you should say Y (or M) here and to "Support | |
2488 | synchronous PPP", below. | |
2489 | ||
2490 | If you said Y to "Version information on all symbols" above, then | |
2491 | you cannot compile the PPP driver into the kernel; you can then only | |
2492 | compile it as a module. To compile this driver as a module, choose M | |
2493 | here and read <file:Documentation/networking/net-modules.txt>. | |
2494 | The module will be called ppp_generic. | |
2495 | ||
2496 | config PPP_MULTILINK | |
2497 | bool "PPP multilink support (EXPERIMENTAL)" | |
2498 | depends on PPP && EXPERIMENTAL | |
2499 | help | |
2500 | PPP multilink is a protocol (defined in RFC 1990) which allows you | |
2501 | to combine several (logical or physical) lines into one logical PPP | |
2502 | connection, so that you can utilize your full bandwidth. | |
2503 | ||
2504 | This has to be supported at the other end as well and you need a | |
2505 | version of the pppd daemon which understands the multilink protocol. | |
2506 | ||
2507 | If unsure, say N. | |
2508 | ||
2509 | config PPP_FILTER | |
2510 | bool "PPP filtering" | |
2511 | depends on PPP | |
2512 | help | |
2513 | Say Y here if you want to be able to filter the packets passing over | |
2514 | PPP interfaces. This allows you to control which packets count as | |
2515 | activity (i.e. which packets will reset the idle timer or bring up | |
2516 | a demand-dialled link) and which packets are to be dropped entirely. | |
2517 | You need to say Y here if you wish to use the pass-filter and | |
2518 | active-filter options to pppd. | |
2519 | ||
2520 | If unsure, say N. | |
2521 | ||
2522 | config PPP_ASYNC | |
2523 | tristate "PPP support for async serial ports" | |
2524 | depends on PPP | |
2525 | select CRC_CCITT | |
2526 | ---help--- | |
2527 | Say Y (or M) here if you want to be able to use PPP over standard | |
2528 | asynchronous serial ports, such as COM1 or COM2 on a PC. If you use | |
2529 | a modem (not a synchronous or ISDN modem) to contact your ISP, you | |
2530 | need this option. | |
2531 | ||
2532 | To compile this driver as a module, choose M here. | |
2533 | ||
2534 | If unsure, say Y. | |
2535 | ||
2536 | config PPP_SYNC_TTY | |
2537 | tristate "PPP support for sync tty ports" | |
2538 | depends on PPP | |
2539 | help | |
2540 | Say Y (or M) here if you want to be able to use PPP over synchronous | |
2541 | (HDLC) tty devices, such as the SyncLink adapter. These devices | |
2542 | are often used for high-speed leased lines like T1/E1. | |
2543 | ||
2544 | To compile this driver as a module, choose M here. | |
2545 | ||
2546 | config PPP_DEFLATE | |
2547 | tristate "PPP Deflate compression" | |
2548 | depends on PPP | |
2549 | select ZLIB_INFLATE | |
2550 | select ZLIB_DEFLATE | |
2551 | ---help--- | |
2552 | Support for the Deflate compression method for PPP, which uses the | |
2553 | Deflate algorithm (the same algorithm that gzip uses) to compress | |
2554 | each PPP packet before it is sent over the wire. The machine at the | |
2555 | other end of the PPP link (usually your ISP) has to support the | |
2556 | Deflate compression method as well for this to be useful. Even if | |
2557 | they don't support it, it is safe to say Y here. | |
2558 | ||
2559 | To compile this driver as a module, choose M here. | |
2560 | ||
2561 | config PPP_BSDCOMP | |
2562 | tristate "PPP BSD-Compress compression" | |
2563 | depends on PPP | |
2564 | ---help--- | |
2565 | Support for the BSD-Compress compression method for PPP, which uses | |
2566 | the LZW compression method to compress each PPP packet before it is | |
2567 | sent over the wire. The machine at the other end of the PPP link | |
2568 | (usually your ISP) has to support the BSD-Compress compression | |
2569 | method as well for this to be useful. Even if they don't support it, | |
2570 | it is safe to say Y here. | |
2571 | ||
2572 | The PPP Deflate compression method ("PPP Deflate compression", | |
2573 | above) is preferable to BSD-Compress, because it compresses better | |
2574 | and is patent-free. | |
2575 | ||
2576 | Note that the BSD compression code will always be compiled as a | |
2577 | module; it is called bsd_comp and will show up in the directory | |
2578 | modules once you have said "make modules". If unsure, say N. | |
2579 | ||
b3f9b92a MD |
2580 | config PPP_MPPE |
2581 | tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)" | |
2582 | depends on PPP && EXPERIMENTAL | |
2583 | select CRYPTO | |
2584 | select CRYPTO_SHA1 | |
2585 | select CRYPTO_ARC4 | |
2586 | ---help--- | |
2587 | Support for the MPPE Encryption protocol, as employed by the | |
2588 | Microsoft Point-to-Point Tunneling Protocol. | |
2589 | ||
2590 | See http://pptpclient.sourceforge.net/ for information on | |
2591 | configuring PPTP clients and servers to utilize this method. | |
2592 | ||
1da177e4 LT |
2593 | config PPPOE |
2594 | tristate "PPP over Ethernet (EXPERIMENTAL)" | |
2595 | depends on EXPERIMENTAL && PPP | |
2596 | help | |
2597 | Support for PPP over Ethernet. | |
2598 | ||
2599 | This driver requires the latest version of pppd from the CVS | |
2600 | repository at cvs.samba.org. Alternatively, see the | |
2601 | RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>) | |
2602 | which contains instruction on how to use this driver (under | |
2603 | the heading "Kernel mode PPPoE"). | |
2604 | ||
2605 | config PPPOATM | |
2606 | tristate "PPP over ATM" | |
2607 | depends on ATM && PPP | |
2608 | help | |
2609 | Support PPP (Point to Point Protocol) encapsulated in ATM frames. | |
2610 | This implementation does not yet comply with section 8 of RFC2364, | |
2611 | which can lead to bad results if the ATM peer loses state and | |
2612 | changes its encapsulation unilaterally. | |
2613 | ||
2614 | config SLIP | |
2615 | tristate "SLIP (serial line) support" | |
1da177e4 LT |
2616 | ---help--- |
2617 | Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to | |
2618 | connect to your Internet service provider or to connect to some | |
2619 | other local Unix box or if you want to configure your Linux box as a | |
2620 | Slip/CSlip server for other people to dial in. SLIP (Serial Line | |
2621 | Internet Protocol) is a protocol used to send Internet traffic over | |
2622 | serial connections such as telephone lines or null modem cables; | |
2623 | nowadays, the protocol PPP is more commonly used for this same | |
2624 | purpose. | |
2625 | ||
2626 | Normally, your access provider has to support SLIP in order for you | |
2627 | to be able to use it, but there is now a SLIP emulator called SLiRP | |
2628 | around (available from | |
2629 | <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which | |
2630 | allows you to use SLIP over a regular dial up shell connection. If | |
2631 | you plan to use SLiRP, make sure to say Y to CSLIP, below. The | |
2632 | NET-3-HOWTO, available from | |
2633 | <http://www.tldp.org/docs.html#howto>, explains how to | |
2634 | configure SLIP. Note that you don't need this option if you just | |
2635 | want to run term (term is a program which gives you almost full | |
2636 | Internet connectivity if you have a regular dial up shell account on | |
2637 | some Internet connected Unix computer. Read | |
2638 | <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP | |
2639 | support will enlarge your kernel by about 4 KB. If unsure, say N. | |
2640 | ||
2641 | To compile this driver as a module, choose M here and read | |
2642 | <file:Documentation/networking/net-modules.txt>. The module will be | |
2643 | called slip. | |
2644 | ||
2645 | config SLIP_COMPRESSED | |
2646 | bool "CSLIP compressed headers" | |
2647 | depends on SLIP | |
2648 | ---help--- | |
2649 | This protocol is faster than SLIP because it uses compression on the | |
2650 | TCP/IP headers (not on the data itself), but it has to be supported | |
2651 | on both ends. Ask your access provider if you are not sure and | |
2652 | answer Y, just in case. You will still be able to use plain SLIP. If | |
2653 | you plan to use SLiRP, the SLIP emulator (available from | |
2654 | <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which | |
2655 | allows you to use SLIP over a regular dial up shell connection, you | |
2656 | definitely want to say Y here. The NET-3-HOWTO, available from | |
2657 | <http://www.tldp.org/docs.html#howto>, explains how to configure | |
2658 | CSLIP. This won't enlarge your kernel. | |
2659 | ||
2660 | config SLIP_SMART | |
2661 | bool "Keepalive and linefill" | |
2662 | depends on SLIP | |
2663 | help | |
2664 | Adds additional capabilities to the SLIP driver to support the | |
2665 | RELCOM line fill and keepalive monitoring. Ideal on poor quality | |
2666 | analogue lines. | |
2667 | ||
2668 | config SLIP_MODE_SLIP6 | |
2669 | bool "Six bit SLIP encapsulation" | |
2670 | depends on SLIP | |
2671 | help | |
2672 | Just occasionally you may need to run IP over hostile serial | |
2673 | networks that don't pass all control characters or are only seven | |
2674 | bit. Saying Y here adds an extra mode you can use with SLIP: | |
2675 | "slip6". In this mode, SLIP will only send normal ASCII symbols over | |
2676 | the serial device. Naturally, this has to be supported at the other | |
2677 | end of the link as well. It's good enough, for example, to run IP | |
2678 | over the async ports of a Camtec JNT Pad. If unsure, say N. | |
2679 | ||
2680 | config NET_FC | |
2681 | bool "Fibre Channel driver support" | |
cbcd2a4c | 2682 | depends on SCSI && PCI |
1da177e4 LT |
2683 | help |
2684 | Fibre Channel is a high speed serial protocol mainly used to connect | |
2685 | large storage devices to the computer; it is compatible with and | |
2686 | intended to replace SCSI. | |
2687 | ||
2688 | If you intend to use Fibre Channel, you need to have a Fibre channel | |
2689 | adaptor card in your computer; say Y here and to the driver for your | |
2690 | adaptor below. You also should have said Y to "SCSI support" and | |
2691 | "SCSI generic support". | |
2692 | ||
2693 | config SHAPER | |
2694 | tristate "Traffic Shaper (EXPERIMENTAL)" | |
cbcd2a4c | 2695 | depends on EXPERIMENTAL |
1da177e4 LT |
2696 | ---help--- |
2697 | The traffic shaper is a virtual network device that allows you to | |
2698 | limit the rate of outgoing data flow over some other network device. | |
2699 | The traffic that you want to slow down can then be routed through | |
2700 | these virtual devices. See | |
2701 | <file:Documentation/networking/shaper.txt> for more information. | |
2702 | ||
2703 | An alternative to this traffic shaper is the experimental | |
2704 | Class-Based Queueing (CBQ) scheduling support which you get if you | |
2705 | say Y to "QoS and/or fair queueing" above. | |
2706 | ||
1da177e4 LT |
2707 | To compile this driver as a module, choose M here: the module |
2708 | will be called shaper. If unsure, say N. | |
2709 | ||
2710 | config NETCONSOLE | |
2711 | tristate "Network console logging support (EXPERIMENTAL)" | |
5e43db77 | 2712 | depends on EXPERIMENTAL |
1da177e4 LT |
2713 | ---help--- |
2714 | If you want to log kernel messages over the network, enable this. | |
2715 | See <file:Documentation/networking/netconsole.txt> for details. | |
2716 | ||
54208991 RD |
2717 | config NETPOLL |
2718 | def_bool NETCONSOLE | |
2719 | ||
2720 | config NETPOLL_RX | |
2721 | bool "Netpoll support for trapping incoming packets" | |
2722 | default n | |
2723 | depends on NETPOLL | |
2724 | ||
2725 | config NETPOLL_TRAP | |
2726 | bool "Netpoll traffic trapping" | |
2727 | default n | |
2728 | depends on NETPOLL | |
2729 | ||
2730 | config NET_POLL_CONTROLLER | |
2731 | def_bool NETPOLL | |
2732 | ||
d5950b43 | 2733 | endmenu |