]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Linux ARCnet driver - COM20020 PCI support | |
3 | * Contemporary Controls PCI20 and SOHARD SH-ARC PCI | |
4 | * | |
5 | * Written 1994-1999 by Avery Pennarun, | |
6 | * based on an ISA version by David Woodhouse. | |
7 | * Written 1999-2000 by Martin Mares <mj@ucw.cz>. | |
8 | * Derived from skeleton.c by Donald Becker. | |
9 | * | |
10 | * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) | |
11 | * for sponsoring the further development of this driver. | |
12 | * | |
13 | * ********************** | |
14 | * | |
15 | * The original copyright of skeleton.c was as follows: | |
16 | * | |
17 | * skeleton.c Written 1993 by Donald Becker. | |
18 | * Copyright 1993 United States Government as represented by the | |
19 | * Director, National Security Agency. This software may only be used | |
20 | * and distributed according to the terms of the GNU General Public License as | |
21 | * modified by SRC, incorporated herein by reference. | |
22 | * | |
23 | * ********************** | |
24 | * | |
25 | * For more details, see drivers/net/arcnet.c | |
26 | * | |
27 | * ********************** | |
28 | */ | |
29 | #include <linux/module.h> | |
30 | #include <linux/moduleparam.h> | |
31 | #include <linux/kernel.h> | |
32 | #include <linux/types.h> | |
33 | #include <linux/ioport.h> | |
34 | #include <linux/slab.h> | |
35 | #include <linux/errno.h> | |
36 | #include <linux/netdevice.h> | |
37 | #include <linux/init.h> | |
38 | #include <linux/pci.h> | |
39 | #include <linux/arcdevice.h> | |
40 | #include <linux/com20020.h> | |
41 | ||
42 | #include <asm/io.h> | |
43 | ||
44 | ||
45 | #define VERSION "arcnet: COM20020 PCI support\n" | |
46 | ||
47 | /* Module parameters */ | |
48 | ||
49 | static int node; | |
50 | static char device[9]; /* use eg. device="arc1" to change name */ | |
51 | static int timeout = 3; | |
52 | static int backplane; | |
53 | static int clockp; | |
54 | static int clockm; | |
55 | ||
56 | module_param(node, int, 0); | |
57 | module_param_string(device, device, sizeof(device), 0); | |
58 | module_param(timeout, int, 0); | |
59 | module_param(backplane, int, 0); | |
60 | module_param(clockp, int, 0); | |
61 | module_param(clockm, int, 0); | |
62 | MODULE_LICENSE("GPL"); | |
63 | ||
64 | static int __devinit com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) | |
65 | { | |
66 | struct net_device *dev; | |
67 | struct arcnet_local *lp; | |
68 | int ioaddr, err; | |
69 | ||
70 | if (pci_enable_device(pdev)) | |
71 | return -EIO; | |
72 | dev = alloc_arcdev(device); | |
73 | if (!dev) | |
74 | return -ENOMEM; | |
75 | lp = dev->priv; | |
76 | ||
77 | pci_set_drvdata(pdev, dev); | |
78 | ||
79 | // SOHARD needs PCI base addr 4 | |
80 | if (pdev->vendor==0x10B5) { | |
81 | BUGMSG(D_NORMAL, "SOHARD\n"); | |
82 | ioaddr = pci_resource_start(pdev, 4); | |
83 | } | |
84 | else { | |
85 | BUGMSG(D_NORMAL, "Contemporary Controls\n"); | |
86 | ioaddr = pci_resource_start(pdev, 2); | |
87 | } | |
88 | ||
89 | if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com20020-pci")) { | |
90 | BUGMSG(D_INIT, "IO region %xh-%xh already allocated.\n", | |
91 | ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); | |
92 | err = -EBUSY; | |
93 | goto out_dev; | |
94 | } | |
95 | ||
96 | // Dummy access after Reset | |
97 | // ARCNET controller needs this access to detect bustype | |
98 | outb(0x00,ioaddr+1); | |
99 | inb(ioaddr+1); | |
100 | ||
101 | dev->base_addr = ioaddr; | |
102 | dev->irq = pdev->irq; | |
103 | dev->dev_addr[0] = node; | |
104 | lp->card_name = "PCI COM20020"; | |
105 | lp->card_flags = id->driver_data; | |
106 | lp->backplane = backplane; | |
107 | lp->clockp = clockp & 7; | |
108 | lp->clockm = clockm & 3; | |
109 | lp->timeout = timeout; | |
110 | lp->hw.owner = THIS_MODULE; | |
111 | ||
112 | if (ASTATUS() == 0xFF) { | |
113 | BUGMSG(D_NORMAL, "IO address %Xh was reported by PCI BIOS, " | |
114 | "but seems empty!\n", ioaddr); | |
115 | err = -EIO; | |
116 | goto out_port; | |
117 | } | |
118 | if (com20020_check(dev)) { | |
119 | err = -EIO; | |
120 | goto out_port; | |
121 | } | |
122 | ||
123 | if ((err = com20020_found(dev, SA_SHIRQ)) != 0) | |
124 | goto out_port; | |
125 | ||
126 | return 0; | |
127 | ||
128 | out_port: | |
129 | release_region(ioaddr, ARCNET_TOTAL_SIZE); | |
130 | out_dev: | |
131 | free_netdev(dev); | |
132 | return err; | |
133 | } | |
134 | ||
135 | static void __devexit com20020pci_remove(struct pci_dev *pdev) | |
136 | { | |
137 | struct net_device *dev = pci_get_drvdata(pdev); | |
138 | unregister_netdev(dev); | |
139 | free_irq(dev->irq, dev); | |
140 | release_region(dev->base_addr, ARCNET_TOTAL_SIZE); | |
141 | free_netdev(dev); | |
142 | } | |
143 | ||
144 | static struct pci_device_id com20020pci_id_table[] = { | |
145 | { 0x1571, 0xa001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
146 | { 0x1571, 0xa002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
147 | { 0x1571, 0xa003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
148 | { 0x1571, 0xa004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
149 | { 0x1571, 0xa005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
150 | { 0x1571, 0xa006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
151 | { 0x1571, 0xa007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
152 | { 0x1571, 0xa008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
153 | { 0x1571, 0xa009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, | |
154 | { 0x1571, 0xa00a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, | |
155 | { 0x1571, 0xa00b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, | |
156 | { 0x1571, 0xa00c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, | |
157 | { 0x1571, 0xa00d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, | |
158 | { 0x1571, 0xa201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | |
159 | { 0x1571, 0xa202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | |
160 | { 0x1571, 0xa203, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | |
161 | { 0x1571, 0xa204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | |
162 | { 0x1571, 0xa205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | |
163 | { 0x1571, 0xa206, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | |
164 | { 0x10B5, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | |
165 | {0,} | |
166 | }; | |
167 | ||
168 | MODULE_DEVICE_TABLE(pci, com20020pci_id_table); | |
169 | ||
170 | static struct pci_driver com20020pci_driver = { | |
171 | .name = "com20020", | |
172 | .id_table = com20020pci_id_table, | |
173 | .probe = com20020pci_probe, | |
174 | .remove = __devexit_p(com20020pci_remove), | |
175 | }; | |
176 | ||
177 | static int __init com20020pci_init(void) | |
178 | { | |
179 | BUGLVL(D_NORMAL) printk(VERSION); | |
180 | return pci_module_init(&com20020pci_driver); | |
181 | } | |
182 | ||
183 | static void __exit com20020pci_cleanup(void) | |
184 | { | |
185 | pci_unregister_driver(&com20020pci_driver); | |
186 | } | |
187 | ||
188 | module_init(com20020pci_init) | |
189 | module_exit(com20020pci_cleanup) |