]>
Commit | Line | Data |
---|---|---|
bc7f75fa AK |
1 | /******************************************************************************* |
2 | ||
3 | Intel PRO/1000 Linux driver | |
ad68076e | 4 | Copyright(c) 1999 - 2008 Intel Corporation. |
bc7f75fa AK |
5 | |
6 | This program is free software; you can redistribute it and/or modify it | |
7 | under the terms and conditions of the GNU General Public License, | |
8 | version 2, as published by the Free Software Foundation. | |
9 | ||
10 | This program is distributed in the hope it will be useful, but WITHOUT | |
11 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
12 | FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
13 | more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License along with | |
16 | this program; if not, write to the Free Software Foundation, Inc., | |
17 | 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
18 | ||
19 | The full GNU General Public License is included in this distribution in | |
20 | the file called "COPYING". | |
21 | ||
22 | Contact Information: | |
23 | Linux NICS <linux.nics@intel.com> | |
24 | e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
25 | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
26 | ||
27 | *******************************************************************************/ | |
28 | ||
29 | #include <linux/netdevice.h> | |
30 | #include <linux/ethtool.h> | |
31 | #include <linux/delay.h> | |
32 | #include <linux/pci.h> | |
33 | ||
34 | #include "e1000.h" | |
35 | ||
36 | enum e1000_mng_mode { | |
37 | e1000_mng_mode_none = 0, | |
38 | e1000_mng_mode_asf, | |
39 | e1000_mng_mode_pt, | |
40 | e1000_mng_mode_ipmi, | |
41 | e1000_mng_mode_host_if_only | |
42 | }; | |
43 | ||
44 | #define E1000_FACTPS_MNGCG 0x20000000 | |
45 | ||
ad68076e BA |
46 | /* Intel(R) Active Management Technology signature */ |
47 | #define E1000_IAMT_SIGNATURE 0x544D4149 | |
bc7f75fa AK |
48 | |
49 | /** | |
50 | * e1000e_get_bus_info_pcie - Get PCIe bus information | |
51 | * @hw: pointer to the HW structure | |
52 | * | |
53 | * Determines and stores the system bus information for a particular | |
54 | * network interface. The following bus information is determined and stored: | |
55 | * bus speed, bus width, type (PCIe), and PCIe function. | |
56 | **/ | |
57 | s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw) | |
58 | { | |
59 | struct e1000_bus_info *bus = &hw->bus; | |
60 | struct e1000_adapter *adapter = hw->adapter; | |
61 | u32 status; | |
62 | u16 pcie_link_status, pci_header_type, cap_offset; | |
63 | ||
64 | cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); | |
65 | if (!cap_offset) { | |
66 | bus->width = e1000_bus_width_unknown; | |
67 | } else { | |
68 | pci_read_config_word(adapter->pdev, | |
69 | cap_offset + PCIE_LINK_STATUS, | |
70 | &pcie_link_status); | |
71 | bus->width = (enum e1000_bus_width)((pcie_link_status & | |
72 | PCIE_LINK_WIDTH_MASK) >> | |
73 | PCIE_LINK_WIDTH_SHIFT); | |
74 | } | |
75 | ||
76 | pci_read_config_word(adapter->pdev, PCI_HEADER_TYPE_REGISTER, | |
77 | &pci_header_type); | |
78 | if (pci_header_type & PCI_HEADER_TYPE_MULTIFUNC) { | |
79 | status = er32(STATUS); | |
80 | bus->func = (status & E1000_STATUS_FUNC_MASK) | |
81 | >> E1000_STATUS_FUNC_SHIFT; | |
82 | } else { | |
83 | bus->func = 0; | |
84 | } | |
85 | ||
86 | return 0; | |
87 | } | |
88 | ||
89 | /** | |
90 | * e1000e_write_vfta - Write value to VLAN filter table | |
91 | * @hw: pointer to the HW structure | |
92 | * @offset: register offset in VLAN filter table | |
93 | * @value: register value written to VLAN filter table | |
94 | * | |
95 | * Writes value at the given offset in the register array which stores | |
96 | * the VLAN filter table. | |
97 | **/ | |
98 | void e1000e_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) | |
99 | { | |
100 | E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); | |
101 | e1e_flush(); | |
102 | } | |
103 | ||
104 | /** | |
105 | * e1000e_init_rx_addrs - Initialize receive address's | |
106 | * @hw: pointer to the HW structure | |
107 | * @rar_count: receive address registers | |
108 | * | |
109 | * Setups the receive address registers by setting the base receive address | |
110 | * register to the devices MAC address and clearing all the other receive | |
111 | * address registers to 0. | |
112 | **/ | |
113 | void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) | |
114 | { | |
115 | u32 i; | |
116 | ||
117 | /* Setup the receive address */ | |
118 | hw_dbg(hw, "Programming MAC Address into RAR[0]\n"); | |
119 | ||
120 | e1000e_rar_set(hw, hw->mac.addr, 0); | |
121 | ||
122 | /* Zero out the other (rar_entry_count - 1) receive addresses */ | |
123 | hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1); | |
124 | for (i = 1; i < rar_count; i++) { | |
125 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0); | |
126 | e1e_flush(); | |
127 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((i << 1) + 1), 0); | |
128 | e1e_flush(); | |
129 | } | |
130 | } | |
131 | ||
132 | /** | |
133 | * e1000e_rar_set - Set receive address register | |
134 | * @hw: pointer to the HW structure | |
135 | * @addr: pointer to the receive address | |
136 | * @index: receive address array register | |
137 | * | |
138 | * Sets the receive address array register at index to the address passed | |
139 | * in by addr. | |
140 | **/ | |
141 | void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) | |
142 | { | |
143 | u32 rar_low, rar_high; | |
144 | ||
ad68076e BA |
145 | /* |
146 | * HW expects these in little endian so we reverse the byte order | |
bc7f75fa AK |
147 | * from network order (big endian) to little endian |
148 | */ | |
149 | rar_low = ((u32) addr[0] | | |
150 | ((u32) addr[1] << 8) | | |
151 | ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); | |
152 | ||
153 | rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); | |
154 | ||
155 | rar_high |= E1000_RAH_AV; | |
156 | ||
157 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, (index << 1), rar_low); | |
158 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((index << 1) + 1), rar_high); | |
159 | } | |
160 | ||
bc7f75fa AK |
161 | /** |
162 | * e1000_hash_mc_addr - Generate a multicast hash value | |
163 | * @hw: pointer to the HW structure | |
164 | * @mc_addr: pointer to a multicast address | |
165 | * | |
166 | * Generates a multicast address hash value which is used to determine | |
167 | * the multicast filter table array address and new table value. See | |
168 | * e1000_mta_set_generic() | |
169 | **/ | |
170 | static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) | |
171 | { | |
172 | u32 hash_value, hash_mask; | |
173 | u8 bit_shift = 0; | |
174 | ||
175 | /* Register count multiplied by bits per register */ | |
176 | hash_mask = (hw->mac.mta_reg_count * 32) - 1; | |
177 | ||
ad68076e BA |
178 | /* |
179 | * For a mc_filter_type of 0, bit_shift is the number of left-shifts | |
180 | * where 0xFF would still fall within the hash mask. | |
181 | */ | |
bc7f75fa AK |
182 | while (hash_mask >> bit_shift != 0xFF) |
183 | bit_shift++; | |
184 | ||
ad68076e BA |
185 | /* |
186 | * The portion of the address that is used for the hash table | |
bc7f75fa AK |
187 | * is determined by the mc_filter_type setting. |
188 | * The algorithm is such that there is a total of 8 bits of shifting. | |
189 | * The bit_shift for a mc_filter_type of 0 represents the number of | |
190 | * left-shifts where the MSB of mc_addr[5] would still fall within | |
191 | * the hash_mask. Case 0 does this exactly. Since there are a total | |
192 | * of 8 bits of shifting, then mc_addr[4] will shift right the | |
193 | * remaining number of bits. Thus 8 - bit_shift. The rest of the | |
194 | * cases are a variation of this algorithm...essentially raising the | |
195 | * number of bits to shift mc_addr[5] left, while still keeping the | |
196 | * 8-bit shifting total. | |
ad68076e BA |
197 | * |
198 | * For example, given the following Destination MAC Address and an | |
bc7f75fa AK |
199 | * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask), |
200 | * we can see that the bit_shift for case 0 is 4. These are the hash | |
201 | * values resulting from each mc_filter_type... | |
202 | * [0] [1] [2] [3] [4] [5] | |
203 | * 01 AA 00 12 34 56 | |
204 | * LSB MSB | |
205 | * | |
206 | * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563 | |
207 | * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6 | |
208 | * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163 | |
209 | * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634 | |
210 | */ | |
211 | switch (hw->mac.mc_filter_type) { | |
212 | default: | |
213 | case 0: | |
214 | break; | |
215 | case 1: | |
216 | bit_shift += 1; | |
217 | break; | |
218 | case 2: | |
219 | bit_shift += 2; | |
220 | break; | |
221 | case 3: | |
222 | bit_shift += 4; | |
223 | break; | |
224 | } | |
225 | ||
226 | hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | | |
227 | (((u16) mc_addr[5]) << bit_shift))); | |
228 | ||
229 | return hash_value; | |
230 | } | |
231 | ||
232 | /** | |
e2de3eb6 | 233 | * e1000e_update_mc_addr_list_generic - Update Multicast addresses |
bc7f75fa AK |
234 | * @hw: pointer to the HW structure |
235 | * @mc_addr_list: array of multicast addresses to program | |
236 | * @mc_addr_count: number of multicast addresses to program | |
237 | * @rar_used_count: the first RAR register free to program | |
238 | * @rar_count: total number of supported Receive Address Registers | |
239 | * | |
240 | * Updates the Receive Address Registers and Multicast Table Array. | |
241 | * The caller must have a packed mc_addr_list of multicast addresses. | |
242 | * The parameter rar_count will usually be hw->mac.rar_entry_count | |
243 | * unless there are workarounds that change this. | |
244 | **/ | |
e2de3eb6 JK |
245 | void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, |
246 | u8 *mc_addr_list, u32 mc_addr_count, | |
247 | u32 rar_used_count, u32 rar_count) | |
bc7f75fa | 248 | { |
bc7f75fa | 249 | u32 i; |
a72d2b2c JB |
250 | u32 *mcarray = kzalloc(hw->mac.mta_reg_count * sizeof(u32), GFP_ATOMIC); |
251 | ||
252 | if (!mcarray) { | |
253 | printk(KERN_ERR "multicast array memory allocation failed\n"); | |
254 | return; | |
255 | } | |
bc7f75fa | 256 | |
ad68076e BA |
257 | /* |
258 | * Load the first set of multicast addresses into the exact | |
bc7f75fa AK |
259 | * filters (RAR). If there are not enough to fill the RAR |
260 | * array, clear the filters. | |
261 | */ | |
262 | for (i = rar_used_count; i < rar_count; i++) { | |
263 | if (mc_addr_count) { | |
264 | e1000e_rar_set(hw, mc_addr_list, i); | |
265 | mc_addr_count--; | |
266 | mc_addr_list += ETH_ALEN; | |
267 | } else { | |
268 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, i << 1, 0); | |
269 | e1e_flush(); | |
270 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1) + 1, 0); | |
271 | e1e_flush(); | |
272 | } | |
273 | } | |
274 | ||
bc7f75fa AK |
275 | /* Load any remaining multicast addresses into the hash table. */ |
276 | for (; mc_addr_count > 0; mc_addr_count--) { | |
a72d2b2c | 277 | u32 hash_value, hash_reg, hash_bit, mta; |
bc7f75fa AK |
278 | hash_value = e1000_hash_mc_addr(hw, mc_addr_list); |
279 | hw_dbg(hw, "Hash value = 0x%03X\n", hash_value); | |
a72d2b2c JB |
280 | hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); |
281 | hash_bit = hash_value & 0x1F; | |
282 | mta = (1 << hash_bit); | |
283 | mcarray[hash_reg] |= mta; | |
bc7f75fa AK |
284 | mc_addr_list += ETH_ALEN; |
285 | } | |
a72d2b2c JB |
286 | |
287 | /* write the hash table completely */ | |
288 | for (i = 0; i < hw->mac.mta_reg_count; i++) | |
289 | E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, mcarray[i]); | |
290 | ||
291 | e1e_flush(); | |
292 | kfree(mcarray); | |
bc7f75fa AK |
293 | } |
294 | ||
295 | /** | |
296 | * e1000e_clear_hw_cntrs_base - Clear base hardware counters | |
297 | * @hw: pointer to the HW structure | |
298 | * | |
299 | * Clears the base hardware counters by reading the counter registers. | |
300 | **/ | |
301 | void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw) | |
302 | { | |
303 | u32 temp; | |
304 | ||
305 | temp = er32(CRCERRS); | |
306 | temp = er32(SYMERRS); | |
307 | temp = er32(MPC); | |
308 | temp = er32(SCC); | |
309 | temp = er32(ECOL); | |
310 | temp = er32(MCC); | |
311 | temp = er32(LATECOL); | |
312 | temp = er32(COLC); | |
313 | temp = er32(DC); | |
314 | temp = er32(SEC); | |
315 | temp = er32(RLEC); | |
316 | temp = er32(XONRXC); | |
317 | temp = er32(XONTXC); | |
318 | temp = er32(XOFFRXC); | |
319 | temp = er32(XOFFTXC); | |
320 | temp = er32(FCRUC); | |
321 | temp = er32(GPRC); | |
322 | temp = er32(BPRC); | |
323 | temp = er32(MPRC); | |
324 | temp = er32(GPTC); | |
325 | temp = er32(GORCL); | |
326 | temp = er32(GORCH); | |
327 | temp = er32(GOTCL); | |
328 | temp = er32(GOTCH); | |
329 | temp = er32(RNBC); | |
330 | temp = er32(RUC); | |
331 | temp = er32(RFC); | |
332 | temp = er32(ROC); | |
333 | temp = er32(RJC); | |
334 | temp = er32(TORL); | |
335 | temp = er32(TORH); | |
336 | temp = er32(TOTL); | |
337 | temp = er32(TOTH); | |
338 | temp = er32(TPR); | |
339 | temp = er32(TPT); | |
340 | temp = er32(MPTC); | |
341 | temp = er32(BPTC); | |
342 | } | |
343 | ||
344 | /** | |
345 | * e1000e_check_for_copper_link - Check for link (Copper) | |
346 | * @hw: pointer to the HW structure | |
347 | * | |
348 | * Checks to see of the link status of the hardware has changed. If a | |
349 | * change in link status has been detected, then we read the PHY registers | |
350 | * to get the current speed/duplex if link exists. | |
351 | **/ | |
352 | s32 e1000e_check_for_copper_link(struct e1000_hw *hw) | |
353 | { | |
354 | struct e1000_mac_info *mac = &hw->mac; | |
355 | s32 ret_val; | |
356 | bool link; | |
357 | ||
ad68076e BA |
358 | /* |
359 | * We only want to go out to the PHY registers to see if Auto-Neg | |
bc7f75fa AK |
360 | * has completed and/or if our link status has changed. The |
361 | * get_link_status flag is set upon receiving a Link Status | |
362 | * Change or Rx Sequence Error interrupt. | |
363 | */ | |
364 | if (!mac->get_link_status) | |
365 | return 0; | |
366 | ||
ad68076e BA |
367 | /* |
368 | * First we want to see if the MII Status Register reports | |
bc7f75fa AK |
369 | * link. If so, then we want to get the current speed/duplex |
370 | * of the PHY. | |
371 | */ | |
372 | ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); | |
373 | if (ret_val) | |
374 | return ret_val; | |
375 | ||
376 | if (!link) | |
377 | return ret_val; /* No link detected */ | |
378 | ||
379 | mac->get_link_status = 0; | |
380 | ||
ad68076e BA |
381 | /* |
382 | * Check if there was DownShift, must be checked | |
383 | * immediately after link-up | |
384 | */ | |
bc7f75fa AK |
385 | e1000e_check_downshift(hw); |
386 | ||
ad68076e BA |
387 | /* |
388 | * If we are forcing speed/duplex, then we simply return since | |
bc7f75fa AK |
389 | * we have already determined whether we have link or not. |
390 | */ | |
391 | if (!mac->autoneg) { | |
392 | ret_val = -E1000_ERR_CONFIG; | |
393 | return ret_val; | |
394 | } | |
395 | ||
ad68076e BA |
396 | /* |
397 | * Auto-Neg is enabled. Auto Speed Detection takes care | |
bc7f75fa AK |
398 | * of MAC speed/duplex configuration. So we only need to |
399 | * configure Collision Distance in the MAC. | |
400 | */ | |
401 | e1000e_config_collision_dist(hw); | |
402 | ||
ad68076e BA |
403 | /* |
404 | * Configure Flow Control now that Auto-Neg has completed. | |
bc7f75fa AK |
405 | * First, we need to restore the desired flow control |
406 | * settings because we may have had to re-autoneg with a | |
407 | * different link partner. | |
408 | */ | |
409 | ret_val = e1000e_config_fc_after_link_up(hw); | |
410 | if (ret_val) { | |
411 | hw_dbg(hw, "Error configuring flow control\n"); | |
412 | } | |
413 | ||
414 | return ret_val; | |
415 | } | |
416 | ||
417 | /** | |
418 | * e1000e_check_for_fiber_link - Check for link (Fiber) | |
419 | * @hw: pointer to the HW structure | |
420 | * | |
421 | * Checks for link up on the hardware. If link is not up and we have | |
422 | * a signal, then we need to force link up. | |
423 | **/ | |
424 | s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) | |
425 | { | |
426 | struct e1000_mac_info *mac = &hw->mac; | |
427 | u32 rxcw; | |
428 | u32 ctrl; | |
429 | u32 status; | |
430 | s32 ret_val; | |
431 | ||
432 | ctrl = er32(CTRL); | |
433 | status = er32(STATUS); | |
434 | rxcw = er32(RXCW); | |
435 | ||
ad68076e BA |
436 | /* |
437 | * If we don't have link (auto-negotiation failed or link partner | |
bc7f75fa AK |
438 | * cannot auto-negotiate), the cable is plugged in (we have signal), |
439 | * and our link partner is not trying to auto-negotiate with us (we | |
440 | * are receiving idles or data), we need to force link up. We also | |
441 | * need to give auto-negotiation time to complete, in case the cable | |
442 | * was just plugged in. The autoneg_failed flag does this. | |
443 | */ | |
444 | /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ | |
445 | if ((ctrl & E1000_CTRL_SWDPIN1) && (!(status & E1000_STATUS_LU)) && | |
446 | (!(rxcw & E1000_RXCW_C))) { | |
447 | if (mac->autoneg_failed == 0) { | |
448 | mac->autoneg_failed = 1; | |
449 | return 0; | |
450 | } | |
451 | hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n"); | |
452 | ||
453 | /* Disable auto-negotiation in the TXCW register */ | |
454 | ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); | |
455 | ||
456 | /* Force link-up and also force full-duplex. */ | |
457 | ctrl = er32(CTRL); | |
458 | ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); | |
459 | ew32(CTRL, ctrl); | |
460 | ||
461 | /* Configure Flow Control after forcing link up. */ | |
462 | ret_val = e1000e_config_fc_after_link_up(hw); | |
463 | if (ret_val) { | |
464 | hw_dbg(hw, "Error configuring flow control\n"); | |
465 | return ret_val; | |
466 | } | |
467 | } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { | |
ad68076e BA |
468 | /* |
469 | * If we are forcing link and we are receiving /C/ ordered | |
bc7f75fa AK |
470 | * sets, re-enable auto-negotiation in the TXCW register |
471 | * and disable forced link in the Device Control register | |
472 | * in an attempt to auto-negotiate with our link partner. | |
473 | */ | |
474 | hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n"); | |
475 | ew32(TXCW, mac->txcw); | |
476 | ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); | |
477 | ||
612e244c | 478 | mac->serdes_has_link = true; |
bc7f75fa AK |
479 | } |
480 | ||
481 | return 0; | |
482 | } | |
483 | ||
484 | /** | |
485 | * e1000e_check_for_serdes_link - Check for link (Serdes) | |
486 | * @hw: pointer to the HW structure | |
487 | * | |
488 | * Checks for link up on the hardware. If link is not up and we have | |
489 | * a signal, then we need to force link up. | |
490 | **/ | |
491 | s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) | |
492 | { | |
493 | struct e1000_mac_info *mac = &hw->mac; | |
494 | u32 rxcw; | |
495 | u32 ctrl; | |
496 | u32 status; | |
497 | s32 ret_val; | |
498 | ||
499 | ctrl = er32(CTRL); | |
500 | status = er32(STATUS); | |
501 | rxcw = er32(RXCW); | |
502 | ||
ad68076e BA |
503 | /* |
504 | * If we don't have link (auto-negotiation failed or link partner | |
bc7f75fa AK |
505 | * cannot auto-negotiate), and our link partner is not trying to |
506 | * auto-negotiate with us (we are receiving idles or data), | |
507 | * we need to force link up. We also need to give auto-negotiation | |
508 | * time to complete. | |
509 | */ | |
510 | /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ | |
511 | if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) { | |
512 | if (mac->autoneg_failed == 0) { | |
513 | mac->autoneg_failed = 1; | |
514 | return 0; | |
515 | } | |
516 | hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n"); | |
517 | ||
518 | /* Disable auto-negotiation in the TXCW register */ | |
519 | ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); | |
520 | ||
521 | /* Force link-up and also force full-duplex. */ | |
522 | ctrl = er32(CTRL); | |
523 | ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); | |
524 | ew32(CTRL, ctrl); | |
525 | ||
526 | /* Configure Flow Control after forcing link up. */ | |
527 | ret_val = e1000e_config_fc_after_link_up(hw); | |
528 | if (ret_val) { | |
529 | hw_dbg(hw, "Error configuring flow control\n"); | |
530 | return ret_val; | |
531 | } | |
532 | } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { | |
ad68076e BA |
533 | /* |
534 | * If we are forcing link and we are receiving /C/ ordered | |
bc7f75fa AK |
535 | * sets, re-enable auto-negotiation in the TXCW register |
536 | * and disable forced link in the Device Control register | |
537 | * in an attempt to auto-negotiate with our link partner. | |
538 | */ | |
539 | hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n"); | |
540 | ew32(TXCW, mac->txcw); | |
541 | ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); | |
542 | ||
612e244c | 543 | mac->serdes_has_link = true; |
bc7f75fa | 544 | } else if (!(E1000_TXCW_ANE & er32(TXCW))) { |
ad68076e BA |
545 | /* |
546 | * If we force link for non-auto-negotiation switch, check | |
bc7f75fa AK |
547 | * link status based on MAC synchronization for internal |
548 | * serdes media type. | |
549 | */ | |
550 | /* SYNCH bit and IV bit are sticky. */ | |
551 | udelay(10); | |
63dcf3d3 BA |
552 | rxcw = er32(RXCW); |
553 | if (rxcw & E1000_RXCW_SYNCH) { | |
bc7f75fa | 554 | if (!(rxcw & E1000_RXCW_IV)) { |
63dcf3d3 BA |
555 | mac->serdes_has_link = true; |
556 | hw_dbg(hw, "SERDES: Link up - forced.\n"); | |
bc7f75fa AK |
557 | } |
558 | } else { | |
63dcf3d3 BA |
559 | mac->serdes_has_link = false; |
560 | hw_dbg(hw, "SERDES: Link down - force failed.\n"); | |
bc7f75fa AK |
561 | } |
562 | } | |
563 | ||
564 | if (E1000_TXCW_ANE & er32(TXCW)) { | |
565 | status = er32(STATUS); | |
63dcf3d3 BA |
566 | if (status & E1000_STATUS_LU) { |
567 | /* SYNCH bit and IV bit are sticky, so reread rxcw. */ | |
568 | udelay(10); | |
569 | rxcw = er32(RXCW); | |
570 | if (rxcw & E1000_RXCW_SYNCH) { | |
571 | if (!(rxcw & E1000_RXCW_IV)) { | |
572 | mac->serdes_has_link = true; | |
573 | hw_dbg(hw, "SERDES: Link up - autoneg " | |
574 | "completed sucessfully.\n"); | |
575 | } else { | |
576 | mac->serdes_has_link = false; | |
577 | hw_dbg(hw, "SERDES: Link down - invalid" | |
578 | "codewords detected in autoneg.\n"); | |
579 | } | |
580 | } else { | |
581 | mac->serdes_has_link = false; | |
582 | hw_dbg(hw, "SERDES: Link down - no sync.\n"); | |
583 | } | |
584 | } else { | |
585 | mac->serdes_has_link = false; | |
586 | hw_dbg(hw, "SERDES: Link down - autoneg failed\n"); | |
587 | } | |
bc7f75fa AK |
588 | } |
589 | ||
590 | return 0; | |
591 | } | |
592 | ||
593 | /** | |
594 | * e1000_set_default_fc_generic - Set flow control default values | |
595 | * @hw: pointer to the HW structure | |
596 | * | |
597 | * Read the EEPROM for the default values for flow control and store the | |
598 | * values. | |
599 | **/ | |
600 | static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) | |
601 | { | |
bc7f75fa AK |
602 | s32 ret_val; |
603 | u16 nvm_data; | |
604 | ||
ad68076e BA |
605 | /* |
606 | * Read and store word 0x0F of the EEPROM. This word contains bits | |
bc7f75fa AK |
607 | * that determine the hardware's default PAUSE (flow control) mode, |
608 | * a bit that determines whether the HW defaults to enabling or | |
609 | * disabling auto-negotiation, and the direction of the | |
610 | * SW defined pins. If there is no SW over-ride of the flow | |
611 | * control setting, then the variable hw->fc will | |
612 | * be initialized based on a value in the EEPROM. | |
613 | */ | |
614 | ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); | |
615 | ||
616 | if (ret_val) { | |
617 | hw_dbg(hw, "NVM Read Error\n"); | |
618 | return ret_val; | |
619 | } | |
620 | ||
621 | if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0) | |
5c48ef3e | 622 | hw->fc.requested_mode = e1000_fc_none; |
bc7f75fa AK |
623 | else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == |
624 | NVM_WORD0F_ASM_DIR) | |
5c48ef3e | 625 | hw->fc.requested_mode = e1000_fc_tx_pause; |
bc7f75fa | 626 | else |
5c48ef3e | 627 | hw->fc.requested_mode = e1000_fc_full; |
bc7f75fa AK |
628 | |
629 | return 0; | |
630 | } | |
631 | ||
632 | /** | |
633 | * e1000e_setup_link - Setup flow control and link settings | |
634 | * @hw: pointer to the HW structure | |
635 | * | |
636 | * Determines which flow control settings to use, then configures flow | |
637 | * control. Calls the appropriate media-specific link configuration | |
638 | * function. Assuming the adapter has a valid link partner, a valid link | |
639 | * should be established. Assumes the hardware has previously been reset | |
640 | * and the transmitter and receiver are not enabled. | |
641 | **/ | |
642 | s32 e1000e_setup_link(struct e1000_hw *hw) | |
643 | { | |
644 | struct e1000_mac_info *mac = &hw->mac; | |
645 | s32 ret_val; | |
646 | ||
ad68076e BA |
647 | /* |
648 | * In the case of the phy reset being blocked, we already have a link. | |
bc7f75fa AK |
649 | * We do not need to set it up again. |
650 | */ | |
651 | if (e1000_check_reset_block(hw)) | |
652 | return 0; | |
653 | ||
309af40b | 654 | /* |
5c48ef3e BA |
655 | * If requested flow control is set to default, set flow control |
656 | * based on the EEPROM flow control settings. | |
309af40b | 657 | */ |
5c48ef3e | 658 | if (hw->fc.requested_mode == e1000_fc_default) { |
309af40b AK |
659 | ret_val = e1000_set_default_fc_generic(hw); |
660 | if (ret_val) | |
661 | return ret_val; | |
662 | } | |
bc7f75fa | 663 | |
ad68076e | 664 | /* |
5c48ef3e BA |
665 | * Save off the requested flow control mode for use later. Depending |
666 | * on the link partner's capabilities, we may or may not use this mode. | |
bc7f75fa | 667 | */ |
5c48ef3e | 668 | hw->fc.current_mode = hw->fc.requested_mode; |
bc7f75fa | 669 | |
5c48ef3e BA |
670 | hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", |
671 | hw->fc.current_mode); | |
bc7f75fa AK |
672 | |
673 | /* Call the necessary media_type subroutine to configure the link. */ | |
674 | ret_val = mac->ops.setup_physical_interface(hw); | |
675 | if (ret_val) | |
676 | return ret_val; | |
677 | ||
ad68076e BA |
678 | /* |
679 | * Initialize the flow control address, type, and PAUSE timer | |
bc7f75fa AK |
680 | * registers to their default values. This is done even if flow |
681 | * control is disabled, because it does not hurt anything to | |
682 | * initialize these registers. | |
683 | */ | |
684 | hw_dbg(hw, "Initializing the Flow Control address, type and timer regs\n"); | |
685 | ew32(FCT, FLOW_CONTROL_TYPE); | |
686 | ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); | |
687 | ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); | |
688 | ||
318a94d6 | 689 | ew32(FCTTV, hw->fc.pause_time); |
bc7f75fa AK |
690 | |
691 | return e1000e_set_fc_watermarks(hw); | |
692 | } | |
693 | ||
694 | /** | |
695 | * e1000_commit_fc_settings_generic - Configure flow control | |
696 | * @hw: pointer to the HW structure | |
697 | * | |
698 | * Write the flow control settings to the Transmit Config Word Register (TXCW) | |
699 | * base on the flow control settings in e1000_mac_info. | |
700 | **/ | |
701 | static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) | |
702 | { | |
703 | struct e1000_mac_info *mac = &hw->mac; | |
704 | u32 txcw; | |
705 | ||
ad68076e BA |
706 | /* |
707 | * Check for a software override of the flow control settings, and | |
bc7f75fa AK |
708 | * setup the device accordingly. If auto-negotiation is enabled, then |
709 | * software will have to set the "PAUSE" bits to the correct value in | |
710 | * the Transmit Config Word Register (TXCW) and re-start auto- | |
711 | * negotiation. However, if auto-negotiation is disabled, then | |
712 | * software will have to manually configure the two flow control enable | |
713 | * bits in the CTRL register. | |
714 | * | |
715 | * The possible values of the "fc" parameter are: | |
716 | * 0: Flow control is completely disabled | |
717 | * 1: Rx flow control is enabled (we can receive pause frames, | |
718 | * but not send pause frames). | |
719 | * 2: Tx flow control is enabled (we can send pause frames but we | |
720 | * do not support receiving pause frames). | |
ad68076e | 721 | * 3: Both Rx and Tx flow control (symmetric) are enabled. |
bc7f75fa | 722 | */ |
5c48ef3e | 723 | switch (hw->fc.current_mode) { |
bc7f75fa AK |
724 | case e1000_fc_none: |
725 | /* Flow control completely disabled by a software over-ride. */ | |
726 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); | |
727 | break; | |
728 | case e1000_fc_rx_pause: | |
ad68076e BA |
729 | /* |
730 | * Rx Flow control is enabled and Tx Flow control is disabled | |
bc7f75fa | 731 | * by a software over-ride. Since there really isn't a way to |
ad68076e BA |
732 | * advertise that we are capable of Rx Pause ONLY, we will |
733 | * advertise that we support both symmetric and asymmetric Rx | |
bc7f75fa AK |
734 | * PAUSE. Later, we will disable the adapter's ability to send |
735 | * PAUSE frames. | |
736 | */ | |
737 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); | |
738 | break; | |
739 | case e1000_fc_tx_pause: | |
ad68076e BA |
740 | /* |
741 | * Tx Flow control is enabled, and Rx Flow control is disabled, | |
bc7f75fa AK |
742 | * by a software over-ride. |
743 | */ | |
744 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); | |
745 | break; | |
746 | case e1000_fc_full: | |
ad68076e BA |
747 | /* |
748 | * Flow control (both Rx and Tx) is enabled by a software | |
bc7f75fa AK |
749 | * over-ride. |
750 | */ | |
751 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); | |
752 | break; | |
753 | default: | |
754 | hw_dbg(hw, "Flow control param set incorrectly\n"); | |
755 | return -E1000_ERR_CONFIG; | |
756 | break; | |
757 | } | |
758 | ||
759 | ew32(TXCW, txcw); | |
760 | mac->txcw = txcw; | |
761 | ||
762 | return 0; | |
763 | } | |
764 | ||
765 | /** | |
766 | * e1000_poll_fiber_serdes_link_generic - Poll for link up | |
767 | * @hw: pointer to the HW structure | |
768 | * | |
769 | * Polls for link up by reading the status register, if link fails to come | |
770 | * up with auto-negotiation, then the link is forced if a signal is detected. | |
771 | **/ | |
772 | static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) | |
773 | { | |
774 | struct e1000_mac_info *mac = &hw->mac; | |
775 | u32 i, status; | |
776 | s32 ret_val; | |
777 | ||
ad68076e BA |
778 | /* |
779 | * If we have a signal (the cable is plugged in, or assumed true for | |
bc7f75fa AK |
780 | * serdes media) then poll for a "Link-Up" indication in the Device |
781 | * Status Register. Time-out if a link isn't seen in 500 milliseconds | |
782 | * seconds (Auto-negotiation should complete in less than 500 | |
783 | * milliseconds even if the other end is doing it in SW). | |
784 | */ | |
785 | for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) { | |
786 | msleep(10); | |
787 | status = er32(STATUS); | |
788 | if (status & E1000_STATUS_LU) | |
789 | break; | |
790 | } | |
791 | if (i == FIBER_LINK_UP_LIMIT) { | |
792 | hw_dbg(hw, "Never got a valid link from auto-neg!!!\n"); | |
793 | mac->autoneg_failed = 1; | |
ad68076e BA |
794 | /* |
795 | * AutoNeg failed to achieve a link, so we'll call | |
bc7f75fa AK |
796 | * mac->check_for_link. This routine will force the |
797 | * link up if we detect a signal. This will allow us to | |
798 | * communicate with non-autonegotiating link partners. | |
799 | */ | |
800 | ret_val = mac->ops.check_for_link(hw); | |
801 | if (ret_val) { | |
802 | hw_dbg(hw, "Error while checking for link\n"); | |
803 | return ret_val; | |
804 | } | |
805 | mac->autoneg_failed = 0; | |
806 | } else { | |
807 | mac->autoneg_failed = 0; | |
808 | hw_dbg(hw, "Valid Link Found\n"); | |
809 | } | |
810 | ||
811 | return 0; | |
812 | } | |
813 | ||
814 | /** | |
815 | * e1000e_setup_fiber_serdes_link - Setup link for fiber/serdes | |
816 | * @hw: pointer to the HW structure | |
817 | * | |
818 | * Configures collision distance and flow control for fiber and serdes | |
819 | * links. Upon successful setup, poll for link. | |
820 | **/ | |
821 | s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) | |
822 | { | |
823 | u32 ctrl; | |
824 | s32 ret_val; | |
825 | ||
826 | ctrl = er32(CTRL); | |
827 | ||
828 | /* Take the link out of reset */ | |
829 | ctrl &= ~E1000_CTRL_LRST; | |
830 | ||
831 | e1000e_config_collision_dist(hw); | |
832 | ||
833 | ret_val = e1000_commit_fc_settings_generic(hw); | |
834 | if (ret_val) | |
835 | return ret_val; | |
836 | ||
ad68076e BA |
837 | /* |
838 | * Since auto-negotiation is enabled, take the link out of reset (the | |
bc7f75fa AK |
839 | * link will be in reset, because we previously reset the chip). This |
840 | * will restart auto-negotiation. If auto-negotiation is successful | |
841 | * then the link-up status bit will be set and the flow control enable | |
842 | * bits (RFCE and TFCE) will be set according to their negotiated value. | |
843 | */ | |
844 | hw_dbg(hw, "Auto-negotiation enabled\n"); | |
845 | ||
846 | ew32(CTRL, ctrl); | |
847 | e1e_flush(); | |
848 | msleep(1); | |
849 | ||
ad68076e BA |
850 | /* |
851 | * For these adapters, the SW definable pin 1 is set when the optics | |
bc7f75fa AK |
852 | * detect a signal. If we have a signal, then poll for a "Link-Up" |
853 | * indication. | |
854 | */ | |
318a94d6 | 855 | if (hw->phy.media_type == e1000_media_type_internal_serdes || |
bc7f75fa AK |
856 | (er32(CTRL) & E1000_CTRL_SWDPIN1)) { |
857 | ret_val = e1000_poll_fiber_serdes_link_generic(hw); | |
858 | } else { | |
859 | hw_dbg(hw, "No signal detected\n"); | |
860 | } | |
861 | ||
862 | return 0; | |
863 | } | |
864 | ||
865 | /** | |
866 | * e1000e_config_collision_dist - Configure collision distance | |
867 | * @hw: pointer to the HW structure | |
868 | * | |
869 | * Configures the collision distance to the default value and is used | |
870 | * during link setup. Currently no func pointer exists and all | |
871 | * implementations are handled in the generic version of this function. | |
872 | **/ | |
873 | void e1000e_config_collision_dist(struct e1000_hw *hw) | |
874 | { | |
875 | u32 tctl; | |
876 | ||
877 | tctl = er32(TCTL); | |
878 | ||
879 | tctl &= ~E1000_TCTL_COLD; | |
880 | tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT; | |
881 | ||
882 | ew32(TCTL, tctl); | |
883 | e1e_flush(); | |
884 | } | |
885 | ||
886 | /** | |
887 | * e1000e_set_fc_watermarks - Set flow control high/low watermarks | |
888 | * @hw: pointer to the HW structure | |
889 | * | |
890 | * Sets the flow control high/low threshold (watermark) registers. If | |
891 | * flow control XON frame transmission is enabled, then set XON frame | |
ad68076e | 892 | * transmission as well. |
bc7f75fa AK |
893 | **/ |
894 | s32 e1000e_set_fc_watermarks(struct e1000_hw *hw) | |
895 | { | |
bc7f75fa AK |
896 | u32 fcrtl = 0, fcrth = 0; |
897 | ||
ad68076e BA |
898 | /* |
899 | * Set the flow control receive threshold registers. Normally, | |
bc7f75fa AK |
900 | * these registers will be set to a default threshold that may be |
901 | * adjusted later by the driver's runtime code. However, if the | |
902 | * ability to transmit pause frames is not enabled, then these | |
903 | * registers will be set to 0. | |
904 | */ | |
5c48ef3e | 905 | if (hw->fc.current_mode & e1000_fc_tx_pause) { |
ad68076e BA |
906 | /* |
907 | * We need to set up the Receive Threshold high and low water | |
bc7f75fa AK |
908 | * marks as well as (optionally) enabling the transmission of |
909 | * XON frames. | |
910 | */ | |
318a94d6 | 911 | fcrtl = hw->fc.low_water; |
bc7f75fa | 912 | fcrtl |= E1000_FCRTL_XONE; |
318a94d6 | 913 | fcrth = hw->fc.high_water; |
bc7f75fa AK |
914 | } |
915 | ew32(FCRTL, fcrtl); | |
916 | ew32(FCRTH, fcrth); | |
917 | ||
918 | return 0; | |
919 | } | |
920 | ||
921 | /** | |
922 | * e1000e_force_mac_fc - Force the MAC's flow control settings | |
923 | * @hw: pointer to the HW structure | |
924 | * | |
925 | * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the | |
926 | * device control register to reflect the adapter settings. TFCE and RFCE | |
927 | * need to be explicitly set by software when a copper PHY is used because | |
928 | * autonegotiation is managed by the PHY rather than the MAC. Software must | |
929 | * also configure these bits when link is forced on a fiber connection. | |
930 | **/ | |
931 | s32 e1000e_force_mac_fc(struct e1000_hw *hw) | |
932 | { | |
bc7f75fa AK |
933 | u32 ctrl; |
934 | ||
935 | ctrl = er32(CTRL); | |
936 | ||
ad68076e BA |
937 | /* |
938 | * Because we didn't get link via the internal auto-negotiation | |
bc7f75fa AK |
939 | * mechanism (we either forced link or we got link via PHY |
940 | * auto-neg), we have to manually enable/disable transmit an | |
941 | * receive flow control. | |
942 | * | |
943 | * The "Case" statement below enables/disable flow control | |
5c48ef3e | 944 | * according to the "hw->fc.current_mode" parameter. |
bc7f75fa AK |
945 | * |
946 | * The possible values of the "fc" parameter are: | |
947 | * 0: Flow control is completely disabled | |
948 | * 1: Rx flow control is enabled (we can receive pause | |
949 | * frames but not send pause frames). | |
950 | * 2: Tx flow control is enabled (we can send pause frames | |
951 | * frames but we do not receive pause frames). | |
ad68076e | 952 | * 3: Both Rx and Tx flow control (symmetric) is enabled. |
bc7f75fa AK |
953 | * other: No other values should be possible at this point. |
954 | */ | |
5c48ef3e | 955 | hw_dbg(hw, "hw->fc.current_mode = %u\n", hw->fc.current_mode); |
bc7f75fa | 956 | |
5c48ef3e | 957 | switch (hw->fc.current_mode) { |
bc7f75fa AK |
958 | case e1000_fc_none: |
959 | ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); | |
960 | break; | |
961 | case e1000_fc_rx_pause: | |
962 | ctrl &= (~E1000_CTRL_TFCE); | |
963 | ctrl |= E1000_CTRL_RFCE; | |
964 | break; | |
965 | case e1000_fc_tx_pause: | |
966 | ctrl &= (~E1000_CTRL_RFCE); | |
967 | ctrl |= E1000_CTRL_TFCE; | |
968 | break; | |
969 | case e1000_fc_full: | |
970 | ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); | |
971 | break; | |
972 | default: | |
973 | hw_dbg(hw, "Flow control param set incorrectly\n"); | |
974 | return -E1000_ERR_CONFIG; | |
975 | } | |
976 | ||
977 | ew32(CTRL, ctrl); | |
978 | ||
979 | return 0; | |
980 | } | |
981 | ||
982 | /** | |
983 | * e1000e_config_fc_after_link_up - Configures flow control after link | |
984 | * @hw: pointer to the HW structure | |
985 | * | |
986 | * Checks the status of auto-negotiation after link up to ensure that the | |
987 | * speed and duplex were not forced. If the link needed to be forced, then | |
988 | * flow control needs to be forced also. If auto-negotiation is enabled | |
989 | * and did not fail, then we configure flow control based on our link | |
990 | * partner. | |
991 | **/ | |
992 | s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) | |
993 | { | |
994 | struct e1000_mac_info *mac = &hw->mac; | |
995 | s32 ret_val = 0; | |
996 | u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; | |
997 | u16 speed, duplex; | |
998 | ||
ad68076e BA |
999 | /* |
1000 | * Check for the case where we have fiber media and auto-neg failed | |
bc7f75fa AK |
1001 | * so we had to force link. In this case, we need to force the |
1002 | * configuration of the MAC to match the "fc" parameter. | |
1003 | */ | |
1004 | if (mac->autoneg_failed) { | |
318a94d6 JK |
1005 | if (hw->phy.media_type == e1000_media_type_fiber || |
1006 | hw->phy.media_type == e1000_media_type_internal_serdes) | |
bc7f75fa AK |
1007 | ret_val = e1000e_force_mac_fc(hw); |
1008 | } else { | |
318a94d6 | 1009 | if (hw->phy.media_type == e1000_media_type_copper) |
bc7f75fa AK |
1010 | ret_val = e1000e_force_mac_fc(hw); |
1011 | } | |
1012 | ||
1013 | if (ret_val) { | |
1014 | hw_dbg(hw, "Error forcing flow control settings\n"); | |
1015 | return ret_val; | |
1016 | } | |
1017 | ||
ad68076e BA |
1018 | /* |
1019 | * Check for the case where we have copper media and auto-neg is | |
bc7f75fa AK |
1020 | * enabled. In this case, we need to check and see if Auto-Neg |
1021 | * has completed, and if so, how the PHY and link partner has | |
1022 | * flow control configured. | |
1023 | */ | |
318a94d6 | 1024 | if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) { |
ad68076e BA |
1025 | /* |
1026 | * Read the MII Status Register and check to see if AutoNeg | |
bc7f75fa AK |
1027 | * has completed. We read this twice because this reg has |
1028 | * some "sticky" (latched) bits. | |
1029 | */ | |
1030 | ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); | |
1031 | if (ret_val) | |
1032 | return ret_val; | |
1033 | ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); | |
1034 | if (ret_val) | |
1035 | return ret_val; | |
1036 | ||
1037 | if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { | |
1038 | hw_dbg(hw, "Copper PHY and Auto Neg " | |
1039 | "has not completed.\n"); | |
1040 | return ret_val; | |
1041 | } | |
1042 | ||
ad68076e BA |
1043 | /* |
1044 | * The AutoNeg process has completed, so we now need to | |
bc7f75fa AK |
1045 | * read both the Auto Negotiation Advertisement |
1046 | * Register (Address 4) and the Auto_Negotiation Base | |
1047 | * Page Ability Register (Address 5) to determine how | |
1048 | * flow control was negotiated. | |
1049 | */ | |
1050 | ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); | |
1051 | if (ret_val) | |
1052 | return ret_val; | |
1053 | ret_val = e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg); | |
1054 | if (ret_val) | |
1055 | return ret_val; | |
1056 | ||
ad68076e BA |
1057 | /* |
1058 | * Two bits in the Auto Negotiation Advertisement Register | |
bc7f75fa AK |
1059 | * (Address 4) and two bits in the Auto Negotiation Base |
1060 | * Page Ability Register (Address 5) determine flow control | |
1061 | * for both the PHY and the link partner. The following | |
1062 | * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, | |
1063 | * 1999, describes these PAUSE resolution bits and how flow | |
1064 | * control is determined based upon these settings. | |
1065 | * NOTE: DC = Don't Care | |
1066 | * | |
1067 | * LOCAL DEVICE | LINK PARTNER | |
1068 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution | |
1069 | *-------|---------|-------|---------|-------------------- | |
1070 | * 0 | 0 | DC | DC | e1000_fc_none | |
1071 | * 0 | 1 | 0 | DC | e1000_fc_none | |
1072 | * 0 | 1 | 1 | 0 | e1000_fc_none | |
1073 | * 0 | 1 | 1 | 1 | e1000_fc_tx_pause | |
1074 | * 1 | 0 | 0 | DC | e1000_fc_none | |
1075 | * 1 | DC | 1 | DC | e1000_fc_full | |
1076 | * 1 | 1 | 0 | 0 | e1000_fc_none | |
1077 | * 1 | 1 | 0 | 1 | e1000_fc_rx_pause | |
1078 | * | |
ad68076e BA |
1079 | * |
1080 | * Are both PAUSE bits set to 1? If so, this implies | |
bc7f75fa AK |
1081 | * Symmetric Flow Control is enabled at both ends. The |
1082 | * ASM_DIR bits are irrelevant per the spec. | |
1083 | * | |
1084 | * For Symmetric Flow Control: | |
1085 | * | |
1086 | * LOCAL DEVICE | LINK PARTNER | |
1087 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result | |
1088 | *-------|---------|-------|---------|-------------------- | |
1089 | * 1 | DC | 1 | DC | E1000_fc_full | |
1090 | * | |
1091 | */ | |
1092 | if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && | |
1093 | (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { | |
ad68076e BA |
1094 | /* |
1095 | * Now we need to check if the user selected Rx ONLY | |
bc7f75fa | 1096 | * of pause frames. In this case, we had to advertise |
ad68076e | 1097 | * FULL flow control because we could not advertise Rx |
bc7f75fa AK |
1098 | * ONLY. Hence, we must now check to see if we need to |
1099 | * turn OFF the TRANSMISSION of PAUSE frames. | |
1100 | */ | |
5c48ef3e BA |
1101 | if (hw->fc.requested_mode == e1000_fc_full) { |
1102 | hw->fc.current_mode = e1000_fc_full; | |
bc7f75fa AK |
1103 | hw_dbg(hw, "Flow Control = FULL.\r\n"); |
1104 | } else { | |
5c48ef3e | 1105 | hw->fc.current_mode = e1000_fc_rx_pause; |
bc7f75fa AK |
1106 | hw_dbg(hw, "Flow Control = " |
1107 | "RX PAUSE frames only.\r\n"); | |
1108 | } | |
1109 | } | |
ad68076e BA |
1110 | /* |
1111 | * For receiving PAUSE frames ONLY. | |
bc7f75fa AK |
1112 | * |
1113 | * LOCAL DEVICE | LINK PARTNER | |
1114 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result | |
1115 | *-------|---------|-------|---------|-------------------- | |
1116 | * 0 | 1 | 1 | 1 | e1000_fc_tx_pause | |
1117 | * | |
1118 | */ | |
1119 | else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && | |
1120 | (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && | |
1121 | (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && | |
1122 | (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { | |
5c48ef3e | 1123 | hw->fc.current_mode = e1000_fc_tx_pause; |
318a94d6 | 1124 | hw_dbg(hw, "Flow Control = Tx PAUSE frames only.\r\n"); |
bc7f75fa | 1125 | } |
ad68076e BA |
1126 | /* |
1127 | * For transmitting PAUSE frames ONLY. | |
bc7f75fa AK |
1128 | * |
1129 | * LOCAL DEVICE | LINK PARTNER | |
1130 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result | |
1131 | *-------|---------|-------|---------|-------------------- | |
1132 | * 1 | 1 | 0 | 1 | e1000_fc_rx_pause | |
1133 | * | |
1134 | */ | |
1135 | else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && | |
1136 | (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && | |
1137 | !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && | |
1138 | (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { | |
5c48ef3e | 1139 | hw->fc.current_mode = e1000_fc_rx_pause; |
318a94d6 | 1140 | hw_dbg(hw, "Flow Control = Rx PAUSE frames only.\r\n"); |
de92d84e JB |
1141 | } else { |
1142 | /* | |
1143 | * Per the IEEE spec, at this point flow control | |
1144 | * should be disabled. | |
1145 | */ | |
5c48ef3e | 1146 | hw->fc.current_mode = e1000_fc_none; |
bc7f75fa | 1147 | hw_dbg(hw, "Flow Control = NONE.\r\n"); |
bc7f75fa AK |
1148 | } |
1149 | ||
ad68076e BA |
1150 | /* |
1151 | * Now we need to do one last check... If we auto- | |
bc7f75fa AK |
1152 | * negotiated to HALF DUPLEX, flow control should not be |
1153 | * enabled per IEEE 802.3 spec. | |
1154 | */ | |
1155 | ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex); | |
1156 | if (ret_val) { | |
1157 | hw_dbg(hw, "Error getting link speed and duplex\n"); | |
1158 | return ret_val; | |
1159 | } | |
1160 | ||
1161 | if (duplex == HALF_DUPLEX) | |
5c48ef3e | 1162 | hw->fc.current_mode = e1000_fc_none; |
bc7f75fa | 1163 | |
ad68076e BA |
1164 | /* |
1165 | * Now we call a subroutine to actually force the MAC | |
bc7f75fa AK |
1166 | * controller to use the correct flow control settings. |
1167 | */ | |
1168 | ret_val = e1000e_force_mac_fc(hw); | |
1169 | if (ret_val) { | |
1170 | hw_dbg(hw, "Error forcing flow control settings\n"); | |
1171 | return ret_val; | |
1172 | } | |
1173 | } | |
1174 | ||
1175 | return 0; | |
1176 | } | |
1177 | ||
1178 | /** | |
489815ce | 1179 | * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex |
bc7f75fa AK |
1180 | * @hw: pointer to the HW structure |
1181 | * @speed: stores the current speed | |
1182 | * @duplex: stores the current duplex | |
1183 | * | |
1184 | * Read the status register for the current speed/duplex and store the current | |
1185 | * speed and duplex for copper connections. | |
1186 | **/ | |
1187 | s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex) | |
1188 | { | |
1189 | u32 status; | |
1190 | ||
1191 | status = er32(STATUS); | |
1192 | if (status & E1000_STATUS_SPEED_1000) { | |
1193 | *speed = SPEED_1000; | |
1194 | hw_dbg(hw, "1000 Mbs, "); | |
1195 | } else if (status & E1000_STATUS_SPEED_100) { | |
1196 | *speed = SPEED_100; | |
1197 | hw_dbg(hw, "100 Mbs, "); | |
1198 | } else { | |
1199 | *speed = SPEED_10; | |
1200 | hw_dbg(hw, "10 Mbs, "); | |
1201 | } | |
1202 | ||
1203 | if (status & E1000_STATUS_FD) { | |
1204 | *duplex = FULL_DUPLEX; | |
1205 | hw_dbg(hw, "Full Duplex\n"); | |
1206 | } else { | |
1207 | *duplex = HALF_DUPLEX; | |
1208 | hw_dbg(hw, "Half Duplex\n"); | |
1209 | } | |
1210 | ||
1211 | return 0; | |
1212 | } | |
1213 | ||
1214 | /** | |
489815ce | 1215 | * e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex |
bc7f75fa AK |
1216 | * @hw: pointer to the HW structure |
1217 | * @speed: stores the current speed | |
1218 | * @duplex: stores the current duplex | |
1219 | * | |
1220 | * Sets the speed and duplex to gigabit full duplex (the only possible option) | |
1221 | * for fiber/serdes links. | |
1222 | **/ | |
1223 | s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex) | |
1224 | { | |
1225 | *speed = SPEED_1000; | |
1226 | *duplex = FULL_DUPLEX; | |
1227 | ||
1228 | return 0; | |
1229 | } | |
1230 | ||
1231 | /** | |
1232 | * e1000e_get_hw_semaphore - Acquire hardware semaphore | |
1233 | * @hw: pointer to the HW structure | |
1234 | * | |
1235 | * Acquire the HW semaphore to access the PHY or NVM | |
1236 | **/ | |
1237 | s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) | |
1238 | { | |
1239 | u32 swsm; | |
1240 | s32 timeout = hw->nvm.word_size + 1; | |
1241 | s32 i = 0; | |
1242 | ||
1243 | /* Get the SW semaphore */ | |
1244 | while (i < timeout) { | |
1245 | swsm = er32(SWSM); | |
1246 | if (!(swsm & E1000_SWSM_SMBI)) | |
1247 | break; | |
1248 | ||
1249 | udelay(50); | |
1250 | i++; | |
1251 | } | |
1252 | ||
1253 | if (i == timeout) { | |
1254 | hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); | |
1255 | return -E1000_ERR_NVM; | |
1256 | } | |
1257 | ||
1258 | /* Get the FW semaphore. */ | |
1259 | for (i = 0; i < timeout; i++) { | |
1260 | swsm = er32(SWSM); | |
1261 | ew32(SWSM, swsm | E1000_SWSM_SWESMBI); | |
1262 | ||
1263 | /* Semaphore acquired if bit latched */ | |
1264 | if (er32(SWSM) & E1000_SWSM_SWESMBI) | |
1265 | break; | |
1266 | ||
1267 | udelay(50); | |
1268 | } | |
1269 | ||
1270 | if (i == timeout) { | |
1271 | /* Release semaphores */ | |
1272 | e1000e_put_hw_semaphore(hw); | |
1273 | hw_dbg(hw, "Driver can't access the NVM\n"); | |
1274 | return -E1000_ERR_NVM; | |
1275 | } | |
1276 | ||
1277 | return 0; | |
1278 | } | |
1279 | ||
1280 | /** | |
1281 | * e1000e_put_hw_semaphore - Release hardware semaphore | |
1282 | * @hw: pointer to the HW structure | |
1283 | * | |
1284 | * Release hardware semaphore used to access the PHY or NVM | |
1285 | **/ | |
1286 | void e1000e_put_hw_semaphore(struct e1000_hw *hw) | |
1287 | { | |
1288 | u32 swsm; | |
1289 | ||
1290 | swsm = er32(SWSM); | |
1291 | swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); | |
1292 | ew32(SWSM, swsm); | |
1293 | } | |
1294 | ||
1295 | /** | |
1296 | * e1000e_get_auto_rd_done - Check for auto read completion | |
1297 | * @hw: pointer to the HW structure | |
1298 | * | |
1299 | * Check EEPROM for Auto Read done bit. | |
1300 | **/ | |
1301 | s32 e1000e_get_auto_rd_done(struct e1000_hw *hw) | |
1302 | { | |
1303 | s32 i = 0; | |
1304 | ||
1305 | while (i < AUTO_READ_DONE_TIMEOUT) { | |
1306 | if (er32(EECD) & E1000_EECD_AUTO_RD) | |
1307 | break; | |
1308 | msleep(1); | |
1309 | i++; | |
1310 | } | |
1311 | ||
1312 | if (i == AUTO_READ_DONE_TIMEOUT) { | |
1313 | hw_dbg(hw, "Auto read by HW from NVM has not completed.\n"); | |
1314 | return -E1000_ERR_RESET; | |
1315 | } | |
1316 | ||
1317 | return 0; | |
1318 | } | |
1319 | ||
1320 | /** | |
1321 | * e1000e_valid_led_default - Verify a valid default LED config | |
1322 | * @hw: pointer to the HW structure | |
1323 | * @data: pointer to the NVM (EEPROM) | |
1324 | * | |
1325 | * Read the EEPROM for the current default LED configuration. If the | |
1326 | * LED configuration is not valid, set to a valid LED configuration. | |
1327 | **/ | |
1328 | s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data) | |
1329 | { | |
1330 | s32 ret_val; | |
1331 | ||
1332 | ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); | |
1333 | if (ret_val) { | |
1334 | hw_dbg(hw, "NVM Read Error\n"); | |
1335 | return ret_val; | |
1336 | } | |
1337 | ||
1338 | if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) | |
1339 | *data = ID_LED_DEFAULT; | |
1340 | ||
1341 | return 0; | |
1342 | } | |
1343 | ||
1344 | /** | |
1345 | * e1000e_id_led_init - | |
1346 | * @hw: pointer to the HW structure | |
1347 | * | |
1348 | **/ | |
1349 | s32 e1000e_id_led_init(struct e1000_hw *hw) | |
1350 | { | |
1351 | struct e1000_mac_info *mac = &hw->mac; | |
1352 | s32 ret_val; | |
1353 | const u32 ledctl_mask = 0x000000FF; | |
1354 | const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; | |
1355 | const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; | |
1356 | u16 data, i, temp; | |
1357 | const u16 led_mask = 0x0F; | |
1358 | ||
1359 | ret_val = hw->nvm.ops.valid_led_default(hw, &data); | |
1360 | if (ret_val) | |
1361 | return ret_val; | |
1362 | ||
1363 | mac->ledctl_default = er32(LEDCTL); | |
1364 | mac->ledctl_mode1 = mac->ledctl_default; | |
1365 | mac->ledctl_mode2 = mac->ledctl_default; | |
1366 | ||
1367 | for (i = 0; i < 4; i++) { | |
1368 | temp = (data >> (i << 2)) & led_mask; | |
1369 | switch (temp) { | |
1370 | case ID_LED_ON1_DEF2: | |
1371 | case ID_LED_ON1_ON2: | |
1372 | case ID_LED_ON1_OFF2: | |
1373 | mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); | |
1374 | mac->ledctl_mode1 |= ledctl_on << (i << 3); | |
1375 | break; | |
1376 | case ID_LED_OFF1_DEF2: | |
1377 | case ID_LED_OFF1_ON2: | |
1378 | case ID_LED_OFF1_OFF2: | |
1379 | mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); | |
1380 | mac->ledctl_mode1 |= ledctl_off << (i << 3); | |
1381 | break; | |
1382 | default: | |
1383 | /* Do nothing */ | |
1384 | break; | |
1385 | } | |
1386 | switch (temp) { | |
1387 | case ID_LED_DEF1_ON2: | |
1388 | case ID_LED_ON1_ON2: | |
1389 | case ID_LED_OFF1_ON2: | |
1390 | mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); | |
1391 | mac->ledctl_mode2 |= ledctl_on << (i << 3); | |
1392 | break; | |
1393 | case ID_LED_DEF1_OFF2: | |
1394 | case ID_LED_ON1_OFF2: | |
1395 | case ID_LED_OFF1_OFF2: | |
1396 | mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); | |
1397 | mac->ledctl_mode2 |= ledctl_off << (i << 3); | |
1398 | break; | |
1399 | default: | |
1400 | /* Do nothing */ | |
1401 | break; | |
1402 | } | |
1403 | } | |
1404 | ||
1405 | return 0; | |
1406 | } | |
1407 | ||
a4f58f54 BA |
1408 | /** |
1409 | * e1000e_setup_led_generic - Configures SW controllable LED | |
1410 | * @hw: pointer to the HW structure | |
1411 | * | |
1412 | * This prepares the SW controllable LED for use and saves the current state | |
1413 | * of the LED so it can be later restored. | |
1414 | **/ | |
1415 | s32 e1000e_setup_led_generic(struct e1000_hw *hw) | |
1416 | { | |
1417 | u32 ledctl; | |
1418 | ||
1419 | if (hw->mac.ops.setup_led != e1000e_setup_led_generic) { | |
1420 | return -E1000_ERR_CONFIG; | |
1421 | } | |
1422 | ||
1423 | if (hw->phy.media_type == e1000_media_type_fiber) { | |
1424 | ledctl = er32(LEDCTL); | |
1425 | hw->mac.ledctl_default = ledctl; | |
1426 | /* Turn off LED0 */ | |
1427 | ledctl &= ~(E1000_LEDCTL_LED0_IVRT | | |
1428 | E1000_LEDCTL_LED0_BLINK | | |
1429 | E1000_LEDCTL_LED0_MODE_MASK); | |
1430 | ledctl |= (E1000_LEDCTL_MODE_LED_OFF << | |
1431 | E1000_LEDCTL_LED0_MODE_SHIFT); | |
1432 | ew32(LEDCTL, ledctl); | |
1433 | } else if (hw->phy.media_type == e1000_media_type_copper) { | |
1434 | ew32(LEDCTL, hw->mac.ledctl_mode1); | |
1435 | } | |
1436 | ||
1437 | return 0; | |
1438 | } | |
1439 | ||
bc7f75fa AK |
1440 | /** |
1441 | * e1000e_cleanup_led_generic - Set LED config to default operation | |
1442 | * @hw: pointer to the HW structure | |
1443 | * | |
1444 | * Remove the current LED configuration and set the LED configuration | |
1445 | * to the default value, saved from the EEPROM. | |
1446 | **/ | |
1447 | s32 e1000e_cleanup_led_generic(struct e1000_hw *hw) | |
1448 | { | |
1449 | ew32(LEDCTL, hw->mac.ledctl_default); | |
1450 | return 0; | |
1451 | } | |
1452 | ||
1453 | /** | |
1454 | * e1000e_blink_led - Blink LED | |
1455 | * @hw: pointer to the HW structure | |
1456 | * | |
489815ce | 1457 | * Blink the LEDs which are set to be on. |
bc7f75fa AK |
1458 | **/ |
1459 | s32 e1000e_blink_led(struct e1000_hw *hw) | |
1460 | { | |
1461 | u32 ledctl_blink = 0; | |
1462 | u32 i; | |
1463 | ||
318a94d6 | 1464 | if (hw->phy.media_type == e1000_media_type_fiber) { |
bc7f75fa AK |
1465 | /* always blink LED0 for PCI-E fiber */ |
1466 | ledctl_blink = E1000_LEDCTL_LED0_BLINK | | |
1467 | (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); | |
1468 | } else { | |
ad68076e BA |
1469 | /* |
1470 | * set the blink bit for each LED that's "on" (0x0E) | |
1471 | * in ledctl_mode2 | |
1472 | */ | |
bc7f75fa AK |
1473 | ledctl_blink = hw->mac.ledctl_mode2; |
1474 | for (i = 0; i < 4; i++) | |
1475 | if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == | |
1476 | E1000_LEDCTL_MODE_LED_ON) | |
1477 | ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << | |
1478 | (i * 8)); | |
1479 | } | |
1480 | ||
1481 | ew32(LEDCTL, ledctl_blink); | |
1482 | ||
1483 | return 0; | |
1484 | } | |
1485 | ||
1486 | /** | |
1487 | * e1000e_led_on_generic - Turn LED on | |
1488 | * @hw: pointer to the HW structure | |
1489 | * | |
1490 | * Turn LED on. | |
1491 | **/ | |
1492 | s32 e1000e_led_on_generic(struct e1000_hw *hw) | |
1493 | { | |
1494 | u32 ctrl; | |
1495 | ||
318a94d6 | 1496 | switch (hw->phy.media_type) { |
bc7f75fa AK |
1497 | case e1000_media_type_fiber: |
1498 | ctrl = er32(CTRL); | |
1499 | ctrl &= ~E1000_CTRL_SWDPIN0; | |
1500 | ctrl |= E1000_CTRL_SWDPIO0; | |
1501 | ew32(CTRL, ctrl); | |
1502 | break; | |
1503 | case e1000_media_type_copper: | |
1504 | ew32(LEDCTL, hw->mac.ledctl_mode2); | |
1505 | break; | |
1506 | default: | |
1507 | break; | |
1508 | } | |
1509 | ||
1510 | return 0; | |
1511 | } | |
1512 | ||
1513 | /** | |
1514 | * e1000e_led_off_generic - Turn LED off | |
1515 | * @hw: pointer to the HW structure | |
1516 | * | |
1517 | * Turn LED off. | |
1518 | **/ | |
1519 | s32 e1000e_led_off_generic(struct e1000_hw *hw) | |
1520 | { | |
1521 | u32 ctrl; | |
1522 | ||
318a94d6 | 1523 | switch (hw->phy.media_type) { |
bc7f75fa AK |
1524 | case e1000_media_type_fiber: |
1525 | ctrl = er32(CTRL); | |
1526 | ctrl |= E1000_CTRL_SWDPIN0; | |
1527 | ctrl |= E1000_CTRL_SWDPIO0; | |
1528 | ew32(CTRL, ctrl); | |
1529 | break; | |
1530 | case e1000_media_type_copper: | |
1531 | ew32(LEDCTL, hw->mac.ledctl_mode1); | |
1532 | break; | |
1533 | default: | |
1534 | break; | |
1535 | } | |
1536 | ||
1537 | return 0; | |
1538 | } | |
1539 | ||
1540 | /** | |
1541 | * e1000e_set_pcie_no_snoop - Set PCI-express capabilities | |
1542 | * @hw: pointer to the HW structure | |
1543 | * @no_snoop: bitmap of snoop events | |
1544 | * | |
1545 | * Set the PCI-express register to snoop for events enabled in 'no_snoop'. | |
1546 | **/ | |
1547 | void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop) | |
1548 | { | |
1549 | u32 gcr; | |
1550 | ||
1551 | if (no_snoop) { | |
1552 | gcr = er32(GCR); | |
1553 | gcr &= ~(PCIE_NO_SNOOP_ALL); | |
1554 | gcr |= no_snoop; | |
1555 | ew32(GCR, gcr); | |
1556 | } | |
1557 | } | |
1558 | ||
1559 | /** | |
1560 | * e1000e_disable_pcie_master - Disables PCI-express master access | |
1561 | * @hw: pointer to the HW structure | |
1562 | * | |
1563 | * Returns 0 if successful, else returns -10 | |
489815ce | 1564 | * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused |
bc7f75fa AK |
1565 | * the master requests to be disabled. |
1566 | * | |
1567 | * Disables PCI-Express master access and verifies there are no pending | |
1568 | * requests. | |
1569 | **/ | |
1570 | s32 e1000e_disable_pcie_master(struct e1000_hw *hw) | |
1571 | { | |
1572 | u32 ctrl; | |
1573 | s32 timeout = MASTER_DISABLE_TIMEOUT; | |
1574 | ||
1575 | ctrl = er32(CTRL); | |
1576 | ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; | |
1577 | ew32(CTRL, ctrl); | |
1578 | ||
1579 | while (timeout) { | |
1580 | if (!(er32(STATUS) & | |
1581 | E1000_STATUS_GIO_MASTER_ENABLE)) | |
1582 | break; | |
1583 | udelay(100); | |
1584 | timeout--; | |
1585 | } | |
1586 | ||
1587 | if (!timeout) { | |
1588 | hw_dbg(hw, "Master requests are pending.\n"); | |
1589 | return -E1000_ERR_MASTER_REQUESTS_PENDING; | |
1590 | } | |
1591 | ||
1592 | return 0; | |
1593 | } | |
1594 | ||
1595 | /** | |
1596 | * e1000e_reset_adaptive - Reset Adaptive Interframe Spacing | |
1597 | * @hw: pointer to the HW structure | |
1598 | * | |
1599 | * Reset the Adaptive Interframe Spacing throttle to default values. | |
1600 | **/ | |
1601 | void e1000e_reset_adaptive(struct e1000_hw *hw) | |
1602 | { | |
1603 | struct e1000_mac_info *mac = &hw->mac; | |
1604 | ||
1605 | mac->current_ifs_val = 0; | |
1606 | mac->ifs_min_val = IFS_MIN; | |
1607 | mac->ifs_max_val = IFS_MAX; | |
1608 | mac->ifs_step_size = IFS_STEP; | |
1609 | mac->ifs_ratio = IFS_RATIO; | |
1610 | ||
1611 | mac->in_ifs_mode = 0; | |
1612 | ew32(AIT, 0); | |
1613 | } | |
1614 | ||
1615 | /** | |
1616 | * e1000e_update_adaptive - Update Adaptive Interframe Spacing | |
1617 | * @hw: pointer to the HW structure | |
1618 | * | |
1619 | * Update the Adaptive Interframe Spacing Throttle value based on the | |
1620 | * time between transmitted packets and time between collisions. | |
1621 | **/ | |
1622 | void e1000e_update_adaptive(struct e1000_hw *hw) | |
1623 | { | |
1624 | struct e1000_mac_info *mac = &hw->mac; | |
1625 | ||
1626 | if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { | |
1627 | if (mac->tx_packet_delta > MIN_NUM_XMITS) { | |
1628 | mac->in_ifs_mode = 1; | |
1629 | if (mac->current_ifs_val < mac->ifs_max_val) { | |
1630 | if (!mac->current_ifs_val) | |
1631 | mac->current_ifs_val = mac->ifs_min_val; | |
1632 | else | |
1633 | mac->current_ifs_val += | |
1634 | mac->ifs_step_size; | |
ad68076e | 1635 | ew32(AIT, mac->current_ifs_val); |
bc7f75fa AK |
1636 | } |
1637 | } | |
1638 | } else { | |
1639 | if (mac->in_ifs_mode && | |
1640 | (mac->tx_packet_delta <= MIN_NUM_XMITS)) { | |
1641 | mac->current_ifs_val = 0; | |
1642 | mac->in_ifs_mode = 0; | |
1643 | ew32(AIT, 0); | |
1644 | } | |
1645 | } | |
1646 | } | |
1647 | ||
1648 | /** | |
1649 | * e1000_raise_eec_clk - Raise EEPROM clock | |
1650 | * @hw: pointer to the HW structure | |
1651 | * @eecd: pointer to the EEPROM | |
1652 | * | |
1653 | * Enable/Raise the EEPROM clock bit. | |
1654 | **/ | |
1655 | static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) | |
1656 | { | |
1657 | *eecd = *eecd | E1000_EECD_SK; | |
1658 | ew32(EECD, *eecd); | |
1659 | e1e_flush(); | |
1660 | udelay(hw->nvm.delay_usec); | |
1661 | } | |
1662 | ||
1663 | /** | |
1664 | * e1000_lower_eec_clk - Lower EEPROM clock | |
1665 | * @hw: pointer to the HW structure | |
1666 | * @eecd: pointer to the EEPROM | |
1667 | * | |
1668 | * Clear/Lower the EEPROM clock bit. | |
1669 | **/ | |
1670 | static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) | |
1671 | { | |
1672 | *eecd = *eecd & ~E1000_EECD_SK; | |
1673 | ew32(EECD, *eecd); | |
1674 | e1e_flush(); | |
1675 | udelay(hw->nvm.delay_usec); | |
1676 | } | |
1677 | ||
1678 | /** | |
1679 | * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM | |
1680 | * @hw: pointer to the HW structure | |
1681 | * @data: data to send to the EEPROM | |
1682 | * @count: number of bits to shift out | |
1683 | * | |
1684 | * We need to shift 'count' bits out to the EEPROM. So, the value in the | |
1685 | * "data" parameter will be shifted out to the EEPROM one bit at a time. | |
1686 | * In order to do this, "data" must be broken down into bits. | |
1687 | **/ | |
1688 | static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) | |
1689 | { | |
1690 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1691 | u32 eecd = er32(EECD); | |
1692 | u32 mask; | |
1693 | ||
1694 | mask = 0x01 << (count - 1); | |
1695 | if (nvm->type == e1000_nvm_eeprom_spi) | |
1696 | eecd |= E1000_EECD_DO; | |
1697 | ||
1698 | do { | |
1699 | eecd &= ~E1000_EECD_DI; | |
1700 | ||
1701 | if (data & mask) | |
1702 | eecd |= E1000_EECD_DI; | |
1703 | ||
1704 | ew32(EECD, eecd); | |
1705 | e1e_flush(); | |
1706 | ||
1707 | udelay(nvm->delay_usec); | |
1708 | ||
1709 | e1000_raise_eec_clk(hw, &eecd); | |
1710 | e1000_lower_eec_clk(hw, &eecd); | |
1711 | ||
1712 | mask >>= 1; | |
1713 | } while (mask); | |
1714 | ||
1715 | eecd &= ~E1000_EECD_DI; | |
1716 | ew32(EECD, eecd); | |
1717 | } | |
1718 | ||
1719 | /** | |
1720 | * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM | |
1721 | * @hw: pointer to the HW structure | |
1722 | * @count: number of bits to shift in | |
1723 | * | |
1724 | * In order to read a register from the EEPROM, we need to shift 'count' bits | |
1725 | * in from the EEPROM. Bits are "shifted in" by raising the clock input to | |
1726 | * the EEPROM (setting the SK bit), and then reading the value of the data out | |
1727 | * "DO" bit. During this "shifting in" process the data in "DI" bit should | |
1728 | * always be clear. | |
1729 | **/ | |
1730 | static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count) | |
1731 | { | |
1732 | u32 eecd; | |
1733 | u32 i; | |
1734 | u16 data; | |
1735 | ||
1736 | eecd = er32(EECD); | |
1737 | ||
1738 | eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); | |
1739 | data = 0; | |
1740 | ||
1741 | for (i = 0; i < count; i++) { | |
1742 | data <<= 1; | |
1743 | e1000_raise_eec_clk(hw, &eecd); | |
1744 | ||
1745 | eecd = er32(EECD); | |
1746 | ||
1747 | eecd &= ~E1000_EECD_DI; | |
1748 | if (eecd & E1000_EECD_DO) | |
1749 | data |= 1; | |
1750 | ||
1751 | e1000_lower_eec_clk(hw, &eecd); | |
1752 | } | |
1753 | ||
1754 | return data; | |
1755 | } | |
1756 | ||
1757 | /** | |
1758 | * e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion | |
1759 | * @hw: pointer to the HW structure | |
1760 | * @ee_reg: EEPROM flag for polling | |
1761 | * | |
1762 | * Polls the EEPROM status bit for either read or write completion based | |
1763 | * upon the value of 'ee_reg'. | |
1764 | **/ | |
1765 | s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) | |
1766 | { | |
1767 | u32 attempts = 100000; | |
1768 | u32 i, reg = 0; | |
1769 | ||
1770 | for (i = 0; i < attempts; i++) { | |
1771 | if (ee_reg == E1000_NVM_POLL_READ) | |
1772 | reg = er32(EERD); | |
1773 | else | |
1774 | reg = er32(EEWR); | |
1775 | ||
1776 | if (reg & E1000_NVM_RW_REG_DONE) | |
1777 | return 0; | |
1778 | ||
1779 | udelay(5); | |
1780 | } | |
1781 | ||
1782 | return -E1000_ERR_NVM; | |
1783 | } | |
1784 | ||
1785 | /** | |
1786 | * e1000e_acquire_nvm - Generic request for access to EEPROM | |
1787 | * @hw: pointer to the HW structure | |
1788 | * | |
1789 | * Set the EEPROM access request bit and wait for EEPROM access grant bit. | |
1790 | * Return successful if access grant bit set, else clear the request for | |
1791 | * EEPROM access and return -E1000_ERR_NVM (-1). | |
1792 | **/ | |
1793 | s32 e1000e_acquire_nvm(struct e1000_hw *hw) | |
1794 | { | |
1795 | u32 eecd = er32(EECD); | |
1796 | s32 timeout = E1000_NVM_GRANT_ATTEMPTS; | |
1797 | ||
1798 | ew32(EECD, eecd | E1000_EECD_REQ); | |
1799 | eecd = er32(EECD); | |
1800 | ||
1801 | while (timeout) { | |
1802 | if (eecd & E1000_EECD_GNT) | |
1803 | break; | |
1804 | udelay(5); | |
1805 | eecd = er32(EECD); | |
1806 | timeout--; | |
1807 | } | |
1808 | ||
1809 | if (!timeout) { | |
1810 | eecd &= ~E1000_EECD_REQ; | |
1811 | ew32(EECD, eecd); | |
1812 | hw_dbg(hw, "Could not acquire NVM grant\n"); | |
1813 | return -E1000_ERR_NVM; | |
1814 | } | |
1815 | ||
1816 | return 0; | |
1817 | } | |
1818 | ||
1819 | /** | |
1820 | * e1000_standby_nvm - Return EEPROM to standby state | |
1821 | * @hw: pointer to the HW structure | |
1822 | * | |
1823 | * Return the EEPROM to a standby state. | |
1824 | **/ | |
1825 | static void e1000_standby_nvm(struct e1000_hw *hw) | |
1826 | { | |
1827 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1828 | u32 eecd = er32(EECD); | |
1829 | ||
1830 | if (nvm->type == e1000_nvm_eeprom_spi) { | |
1831 | /* Toggle CS to flush commands */ | |
1832 | eecd |= E1000_EECD_CS; | |
1833 | ew32(EECD, eecd); | |
1834 | e1e_flush(); | |
1835 | udelay(nvm->delay_usec); | |
1836 | eecd &= ~E1000_EECD_CS; | |
1837 | ew32(EECD, eecd); | |
1838 | e1e_flush(); | |
1839 | udelay(nvm->delay_usec); | |
1840 | } | |
1841 | } | |
1842 | ||
1843 | /** | |
1844 | * e1000_stop_nvm - Terminate EEPROM command | |
1845 | * @hw: pointer to the HW structure | |
1846 | * | |
1847 | * Terminates the current command by inverting the EEPROM's chip select pin. | |
1848 | **/ | |
1849 | static void e1000_stop_nvm(struct e1000_hw *hw) | |
1850 | { | |
1851 | u32 eecd; | |
1852 | ||
1853 | eecd = er32(EECD); | |
1854 | if (hw->nvm.type == e1000_nvm_eeprom_spi) { | |
1855 | /* Pull CS high */ | |
1856 | eecd |= E1000_EECD_CS; | |
1857 | e1000_lower_eec_clk(hw, &eecd); | |
1858 | } | |
1859 | } | |
1860 | ||
1861 | /** | |
1862 | * e1000e_release_nvm - Release exclusive access to EEPROM | |
1863 | * @hw: pointer to the HW structure | |
1864 | * | |
1865 | * Stop any current commands to the EEPROM and clear the EEPROM request bit. | |
1866 | **/ | |
1867 | void e1000e_release_nvm(struct e1000_hw *hw) | |
1868 | { | |
1869 | u32 eecd; | |
1870 | ||
1871 | e1000_stop_nvm(hw); | |
1872 | ||
1873 | eecd = er32(EECD); | |
1874 | eecd &= ~E1000_EECD_REQ; | |
1875 | ew32(EECD, eecd); | |
1876 | } | |
1877 | ||
1878 | /** | |
1879 | * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write | |
1880 | * @hw: pointer to the HW structure | |
1881 | * | |
1882 | * Setups the EEPROM for reading and writing. | |
1883 | **/ | |
1884 | static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) | |
1885 | { | |
1886 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1887 | u32 eecd = er32(EECD); | |
1888 | u16 timeout = 0; | |
1889 | u8 spi_stat_reg; | |
1890 | ||
1891 | if (nvm->type == e1000_nvm_eeprom_spi) { | |
1892 | /* Clear SK and CS */ | |
1893 | eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); | |
1894 | ew32(EECD, eecd); | |
1895 | udelay(1); | |
1896 | timeout = NVM_MAX_RETRY_SPI; | |
1897 | ||
ad68076e BA |
1898 | /* |
1899 | * Read "Status Register" repeatedly until the LSB is cleared. | |
bc7f75fa AK |
1900 | * The EEPROM will signal that the command has been completed |
1901 | * by clearing bit 0 of the internal status register. If it's | |
ad68076e BA |
1902 | * not cleared within 'timeout', then error out. |
1903 | */ | |
bc7f75fa AK |
1904 | while (timeout) { |
1905 | e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, | |
1906 | hw->nvm.opcode_bits); | |
1907 | spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8); | |
1908 | if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) | |
1909 | break; | |
1910 | ||
1911 | udelay(5); | |
1912 | e1000_standby_nvm(hw); | |
1913 | timeout--; | |
1914 | } | |
1915 | ||
1916 | if (!timeout) { | |
1917 | hw_dbg(hw, "SPI NVM Status error\n"); | |
1918 | return -E1000_ERR_NVM; | |
1919 | } | |
1920 | } | |
1921 | ||
1922 | return 0; | |
1923 | } | |
1924 | ||
bc7f75fa AK |
1925 | /** |
1926 | * e1000e_read_nvm_eerd - Reads EEPROM using EERD register | |
1927 | * @hw: pointer to the HW structure | |
1928 | * @offset: offset of word in the EEPROM to read | |
1929 | * @words: number of words to read | |
1930 | * @data: word read from the EEPROM | |
1931 | * | |
1932 | * Reads a 16 bit word from the EEPROM using the EERD register. | |
1933 | **/ | |
1934 | s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) | |
1935 | { | |
1936 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1937 | u32 i, eerd = 0; | |
1938 | s32 ret_val = 0; | |
1939 | ||
ad68076e BA |
1940 | /* |
1941 | * A check for invalid values: offset too large, too many words, | |
1942 | * too many words for the offset, and not enough words. | |
1943 | */ | |
bc7f75fa AK |
1944 | if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || |
1945 | (words == 0)) { | |
1946 | hw_dbg(hw, "nvm parameter(s) out of bounds\n"); | |
1947 | return -E1000_ERR_NVM; | |
1948 | } | |
1949 | ||
1950 | for (i = 0; i < words; i++) { | |
1951 | eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + | |
1952 | E1000_NVM_RW_REG_START; | |
1953 | ||
1954 | ew32(EERD, eerd); | |
1955 | ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); | |
1956 | if (ret_val) | |
1957 | break; | |
1958 | ||
ad68076e | 1959 | data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA); |
bc7f75fa AK |
1960 | } |
1961 | ||
1962 | return ret_val; | |
1963 | } | |
1964 | ||
1965 | /** | |
1966 | * e1000e_write_nvm_spi - Write to EEPROM using SPI | |
1967 | * @hw: pointer to the HW structure | |
1968 | * @offset: offset within the EEPROM to be written to | |
1969 | * @words: number of words to write | |
1970 | * @data: 16 bit word(s) to be written to the EEPROM | |
1971 | * | |
1972 | * Writes data to EEPROM at offset using SPI interface. | |
1973 | * | |
1974 | * If e1000e_update_nvm_checksum is not called after this function , the | |
489815ce | 1975 | * EEPROM will most likely contain an invalid checksum. |
bc7f75fa AK |
1976 | **/ |
1977 | s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) | |
1978 | { | |
1979 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1980 | s32 ret_val; | |
1981 | u16 widx = 0; | |
1982 | ||
ad68076e BA |
1983 | /* |
1984 | * A check for invalid values: offset too large, too many words, | |
1985 | * and not enough words. | |
1986 | */ | |
bc7f75fa AK |
1987 | if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || |
1988 | (words == 0)) { | |
1989 | hw_dbg(hw, "nvm parameter(s) out of bounds\n"); | |
1990 | return -E1000_ERR_NVM; | |
1991 | } | |
1992 | ||
1993 | ret_val = nvm->ops.acquire_nvm(hw); | |
1994 | if (ret_val) | |
1995 | return ret_val; | |
1996 | ||
1997 | msleep(10); | |
1998 | ||
1999 | while (widx < words) { | |
2000 | u8 write_opcode = NVM_WRITE_OPCODE_SPI; | |
2001 | ||
2002 | ret_val = e1000_ready_nvm_eeprom(hw); | |
2003 | if (ret_val) { | |
2004 | nvm->ops.release_nvm(hw); | |
2005 | return ret_val; | |
2006 | } | |
2007 | ||
2008 | e1000_standby_nvm(hw); | |
2009 | ||
2010 | /* Send the WRITE ENABLE command (8 bit opcode) */ | |
2011 | e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, | |
2012 | nvm->opcode_bits); | |
2013 | ||
2014 | e1000_standby_nvm(hw); | |
2015 | ||
ad68076e BA |
2016 | /* |
2017 | * Some SPI eeproms use the 8th address bit embedded in the | |
2018 | * opcode | |
2019 | */ | |
bc7f75fa AK |
2020 | if ((nvm->address_bits == 8) && (offset >= 128)) |
2021 | write_opcode |= NVM_A8_OPCODE_SPI; | |
2022 | ||
2023 | /* Send the Write command (8-bit opcode + addr) */ | |
2024 | e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); | |
2025 | e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), | |
2026 | nvm->address_bits); | |
2027 | ||
2028 | /* Loop to allow for up to whole page write of eeprom */ | |
2029 | while (widx < words) { | |
2030 | u16 word_out = data[widx]; | |
2031 | word_out = (word_out >> 8) | (word_out << 8); | |
2032 | e1000_shift_out_eec_bits(hw, word_out, 16); | |
2033 | widx++; | |
2034 | ||
2035 | if ((((offset + widx) * 2) % nvm->page_size) == 0) { | |
2036 | e1000_standby_nvm(hw); | |
2037 | break; | |
2038 | } | |
2039 | } | |
2040 | } | |
2041 | ||
2042 | msleep(10); | |
1694f25b | 2043 | nvm->ops.release_nvm(hw); |
bc7f75fa AK |
2044 | return 0; |
2045 | } | |
2046 | ||
2047 | /** | |
2048 | * e1000e_read_mac_addr - Read device MAC address | |
2049 | * @hw: pointer to the HW structure | |
2050 | * | |
2051 | * Reads the device MAC address from the EEPROM and stores the value. | |
2052 | * Since devices with two ports use the same EEPROM, we increment the | |
2053 | * last bit in the MAC address for the second port. | |
2054 | **/ | |
2055 | s32 e1000e_read_mac_addr(struct e1000_hw *hw) | |
2056 | { | |
2057 | s32 ret_val; | |
2058 | u16 offset, nvm_data, i; | |
93ca1610 BH |
2059 | u16 mac_addr_offset = 0; |
2060 | ||
2061 | if (hw->mac.type == e1000_82571) { | |
2062 | /* Check for an alternate MAC address. An alternate MAC | |
2063 | * address can be setup by pre-boot software and must be | |
2064 | * treated like a permanent address and must override the | |
ad68076e | 2065 | * actual permanent MAC address.*/ |
93ca1610 | 2066 | ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, |
ad68076e | 2067 | &mac_addr_offset); |
93ca1610 BH |
2068 | if (ret_val) { |
2069 | hw_dbg(hw, "NVM Read Error\n"); | |
2070 | return ret_val; | |
2071 | } | |
2072 | if (mac_addr_offset == 0xFFFF) | |
2073 | mac_addr_offset = 0; | |
2074 | ||
2075 | if (mac_addr_offset) { | |
2076 | if (hw->bus.func == E1000_FUNC_1) | |
2077 | mac_addr_offset += ETH_ALEN/sizeof(u16); | |
2078 | ||
2079 | /* make sure we have a valid mac address here | |
ad68076e | 2080 | * before using it */ |
93ca1610 BH |
2081 | ret_val = e1000_read_nvm(hw, mac_addr_offset, 1, |
2082 | &nvm_data); | |
2083 | if (ret_val) { | |
2084 | hw_dbg(hw, "NVM Read Error\n"); | |
2085 | return ret_val; | |
2086 | } | |
2087 | if (nvm_data & 0x0001) | |
2088 | mac_addr_offset = 0; | |
2089 | } | |
2090 | ||
2091 | if (mac_addr_offset) | |
ad68076e | 2092 | hw->dev_spec.e82571.alt_mac_addr_is_present = 1; |
93ca1610 | 2093 | } |
bc7f75fa AK |
2094 | |
2095 | for (i = 0; i < ETH_ALEN; i += 2) { | |
93ca1610 | 2096 | offset = mac_addr_offset + (i >> 1); |
bc7f75fa AK |
2097 | ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data); |
2098 | if (ret_val) { | |
2099 | hw_dbg(hw, "NVM Read Error\n"); | |
2100 | return ret_val; | |
2101 | } | |
2102 | hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF); | |
2103 | hw->mac.perm_addr[i+1] = (u8)(nvm_data >> 8); | |
2104 | } | |
2105 | ||
2106 | /* Flip last bit of mac address if we're on second port */ | |
93ca1610 | 2107 | if (!mac_addr_offset && hw->bus.func == E1000_FUNC_1) |
bc7f75fa AK |
2108 | hw->mac.perm_addr[5] ^= 1; |
2109 | ||
2110 | for (i = 0; i < ETH_ALEN; i++) | |
2111 | hw->mac.addr[i] = hw->mac.perm_addr[i]; | |
2112 | ||
2113 | return 0; | |
2114 | } | |
2115 | ||
2116 | /** | |
2117 | * e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum | |
2118 | * @hw: pointer to the HW structure | |
2119 | * | |
2120 | * Calculates the EEPROM checksum by reading/adding each word of the EEPROM | |
2121 | * and then verifies that the sum of the EEPROM is equal to 0xBABA. | |
2122 | **/ | |
2123 | s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw) | |
2124 | { | |
2125 | s32 ret_val; | |
2126 | u16 checksum = 0; | |
2127 | u16 i, nvm_data; | |
2128 | ||
2129 | for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { | |
2130 | ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); | |
2131 | if (ret_val) { | |
2132 | hw_dbg(hw, "NVM Read Error\n"); | |
2133 | return ret_val; | |
2134 | } | |
2135 | checksum += nvm_data; | |
2136 | } | |
2137 | ||
2138 | if (checksum != (u16) NVM_SUM) { | |
2139 | hw_dbg(hw, "NVM Checksum Invalid\n"); | |
2140 | return -E1000_ERR_NVM; | |
2141 | } | |
2142 | ||
2143 | return 0; | |
2144 | } | |
2145 | ||
2146 | /** | |
2147 | * e1000e_update_nvm_checksum_generic - Update EEPROM checksum | |
2148 | * @hw: pointer to the HW structure | |
2149 | * | |
2150 | * Updates the EEPROM checksum by reading/adding each word of the EEPROM | |
2151 | * up to the checksum. Then calculates the EEPROM checksum and writes the | |
2152 | * value to the EEPROM. | |
2153 | **/ | |
2154 | s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw) | |
2155 | { | |
2156 | s32 ret_val; | |
2157 | u16 checksum = 0; | |
2158 | u16 i, nvm_data; | |
2159 | ||
2160 | for (i = 0; i < NVM_CHECKSUM_REG; i++) { | |
2161 | ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); | |
2162 | if (ret_val) { | |
2163 | hw_dbg(hw, "NVM Read Error while updating checksum.\n"); | |
2164 | return ret_val; | |
2165 | } | |
2166 | checksum += nvm_data; | |
2167 | } | |
2168 | checksum = (u16) NVM_SUM - checksum; | |
2169 | ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum); | |
2170 | if (ret_val) | |
2171 | hw_dbg(hw, "NVM Write Error while updating checksum.\n"); | |
2172 | ||
2173 | return ret_val; | |
2174 | } | |
2175 | ||
2176 | /** | |
2177 | * e1000e_reload_nvm - Reloads EEPROM | |
2178 | * @hw: pointer to the HW structure | |
2179 | * | |
2180 | * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the | |
2181 | * extended control register. | |
2182 | **/ | |
2183 | void e1000e_reload_nvm(struct e1000_hw *hw) | |
2184 | { | |
2185 | u32 ctrl_ext; | |
2186 | ||
2187 | udelay(10); | |
2188 | ctrl_ext = er32(CTRL_EXT); | |
2189 | ctrl_ext |= E1000_CTRL_EXT_EE_RST; | |
2190 | ew32(CTRL_EXT, ctrl_ext); | |
2191 | e1e_flush(); | |
2192 | } | |
2193 | ||
2194 | /** | |
2195 | * e1000_calculate_checksum - Calculate checksum for buffer | |
2196 | * @buffer: pointer to EEPROM | |
2197 | * @length: size of EEPROM to calculate a checksum for | |
2198 | * | |
2199 | * Calculates the checksum for some buffer on a specified length. The | |
2200 | * checksum calculated is returned. | |
2201 | **/ | |
2202 | static u8 e1000_calculate_checksum(u8 *buffer, u32 length) | |
2203 | { | |
2204 | u32 i; | |
2205 | u8 sum = 0; | |
2206 | ||
2207 | if (!buffer) | |
2208 | return 0; | |
2209 | ||
2210 | for (i = 0; i < length; i++) | |
2211 | sum += buffer[i]; | |
2212 | ||
2213 | return (u8) (0 - sum); | |
2214 | } | |
2215 | ||
2216 | /** | |
2217 | * e1000_mng_enable_host_if - Checks host interface is enabled | |
2218 | * @hw: pointer to the HW structure | |
2219 | * | |
2220 | * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND | |
2221 | * | |
489815ce | 2222 | * This function checks whether the HOST IF is enabled for command operation |
bc7f75fa AK |
2223 | * and also checks whether the previous command is completed. It busy waits |
2224 | * in case of previous command is not completed. | |
2225 | **/ | |
2226 | static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) | |
2227 | { | |
2228 | u32 hicr; | |
2229 | u8 i; | |
2230 | ||
2231 | /* Check that the host interface is enabled. */ | |
2232 | hicr = er32(HICR); | |
2233 | if ((hicr & E1000_HICR_EN) == 0) { | |
2234 | hw_dbg(hw, "E1000_HOST_EN bit disabled.\n"); | |
2235 | return -E1000_ERR_HOST_INTERFACE_COMMAND; | |
2236 | } | |
2237 | /* check the previous command is completed */ | |
2238 | for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { | |
2239 | hicr = er32(HICR); | |
2240 | if (!(hicr & E1000_HICR_C)) | |
2241 | break; | |
2242 | mdelay(1); | |
2243 | } | |
2244 | ||
2245 | if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { | |
2246 | hw_dbg(hw, "Previous command timeout failed .\n"); | |
2247 | return -E1000_ERR_HOST_INTERFACE_COMMAND; | |
2248 | } | |
2249 | ||
2250 | return 0; | |
2251 | } | |
2252 | ||
2253 | /** | |
4662e82b | 2254 | * e1000e_check_mng_mode_generic - check management mode |
bc7f75fa AK |
2255 | * @hw: pointer to the HW structure |
2256 | * | |
2257 | * Reads the firmware semaphore register and returns true (>0) if | |
2258 | * manageability is enabled, else false (0). | |
2259 | **/ | |
4662e82b | 2260 | bool e1000e_check_mng_mode_generic(struct e1000_hw *hw) |
bc7f75fa AK |
2261 | { |
2262 | u32 fwsm = er32(FWSM); | |
2263 | ||
4662e82b BA |
2264 | return (fwsm & E1000_FWSM_MODE_MASK) == |
2265 | (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); | |
bc7f75fa AK |
2266 | } |
2267 | ||
2268 | /** | |
ad68076e | 2269 | * e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx |
bc7f75fa AK |
2270 | * @hw: pointer to the HW structure |
2271 | * | |
2272 | * Enables packet filtering on transmit packets if manageability is enabled | |
2273 | * and host interface is enabled. | |
2274 | **/ | |
2275 | bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) | |
2276 | { | |
2277 | struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie; | |
2278 | u32 *buffer = (u32 *)&hw->mng_cookie; | |
2279 | u32 offset; | |
2280 | s32 ret_val, hdr_csum, csum; | |
2281 | u8 i, len; | |
2282 | ||
2283 | /* No manageability, no filtering */ | |
2284 | if (!e1000e_check_mng_mode(hw)) { | |
2285 | hw->mac.tx_pkt_filtering = 0; | |
2286 | return 0; | |
2287 | } | |
2288 | ||
ad68076e BA |
2289 | /* |
2290 | * If we can't read from the host interface for whatever | |
bc7f75fa AK |
2291 | * reason, disable filtering. |
2292 | */ | |
2293 | ret_val = e1000_mng_enable_host_if(hw); | |
2294 | if (ret_val != 0) { | |
2295 | hw->mac.tx_pkt_filtering = 0; | |
2296 | return ret_val; | |
2297 | } | |
2298 | ||
2299 | /* Read in the header. Length and offset are in dwords. */ | |
2300 | len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2; | |
2301 | offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; | |
2302 | for (i = 0; i < len; i++) | |
2303 | *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i); | |
2304 | hdr_csum = hdr->checksum; | |
2305 | hdr->checksum = 0; | |
2306 | csum = e1000_calculate_checksum((u8 *)hdr, | |
2307 | E1000_MNG_DHCP_COOKIE_LENGTH); | |
ad68076e BA |
2308 | /* |
2309 | * If either the checksums or signature don't match, then | |
bc7f75fa AK |
2310 | * the cookie area isn't considered valid, in which case we |
2311 | * take the safe route of assuming Tx filtering is enabled. | |
2312 | */ | |
2313 | if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { | |
2314 | hw->mac.tx_pkt_filtering = 1; | |
2315 | return 1; | |
2316 | } | |
2317 | ||
2318 | /* Cookie area is valid, make the final check for filtering. */ | |
2319 | if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) { | |
2320 | hw->mac.tx_pkt_filtering = 0; | |
2321 | return 0; | |
2322 | } | |
2323 | ||
2324 | hw->mac.tx_pkt_filtering = 1; | |
2325 | return 1; | |
2326 | } | |
2327 | ||
2328 | /** | |
2329 | * e1000_mng_write_cmd_header - Writes manageability command header | |
2330 | * @hw: pointer to the HW structure | |
2331 | * @hdr: pointer to the host interface command header | |
2332 | * | |
2333 | * Writes the command header after does the checksum calculation. | |
2334 | **/ | |
2335 | static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, | |
2336 | struct e1000_host_mng_command_header *hdr) | |
2337 | { | |
2338 | u16 i, length = sizeof(struct e1000_host_mng_command_header); | |
2339 | ||
2340 | /* Write the whole command header structure with new checksum. */ | |
2341 | ||
2342 | hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length); | |
2343 | ||
2344 | length >>= 2; | |
2345 | /* Write the relevant command block into the ram area. */ | |
2346 | for (i = 0; i < length; i++) { | |
2347 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i, | |
2348 | *((u32 *) hdr + i)); | |
2349 | e1e_flush(); | |
2350 | } | |
2351 | ||
2352 | return 0; | |
2353 | } | |
2354 | ||
2355 | /** | |
2356 | * e1000_mng_host_if_write - Writes to the manageability host interface | |
2357 | * @hw: pointer to the HW structure | |
2358 | * @buffer: pointer to the host interface buffer | |
2359 | * @length: size of the buffer | |
2360 | * @offset: location in the buffer to write to | |
2361 | * @sum: sum of the data (not checksum) | |
2362 | * | |
2363 | * This function writes the buffer content at the offset given on the host if. | |
2364 | * It also does alignment considerations to do the writes in most efficient | |
2365 | * way. Also fills up the sum of the buffer in *buffer parameter. | |
2366 | **/ | |
2367 | static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, | |
2368 | u16 length, u16 offset, u8 *sum) | |
2369 | { | |
2370 | u8 *tmp; | |
2371 | u8 *bufptr = buffer; | |
2372 | u32 data = 0; | |
2373 | u16 remaining, i, j, prev_bytes; | |
2374 | ||
2375 | /* sum = only sum of the data and it is not checksum */ | |
2376 | ||
2377 | if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) | |
2378 | return -E1000_ERR_PARAM; | |
2379 | ||
2380 | tmp = (u8 *)&data; | |
2381 | prev_bytes = offset & 0x3; | |
2382 | offset >>= 2; | |
2383 | ||
2384 | if (prev_bytes) { | |
2385 | data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset); | |
2386 | for (j = prev_bytes; j < sizeof(u32); j++) { | |
2387 | *(tmp + j) = *bufptr++; | |
2388 | *sum += *(tmp + j); | |
2389 | } | |
2390 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data); | |
2391 | length -= j - prev_bytes; | |
2392 | offset++; | |
2393 | } | |
2394 | ||
2395 | remaining = length & 0x3; | |
2396 | length -= remaining; | |
2397 | ||
2398 | /* Calculate length in DWORDs */ | |
2399 | length >>= 2; | |
2400 | ||
ad68076e BA |
2401 | /* |
2402 | * The device driver writes the relevant command block into the | |
2403 | * ram area. | |
2404 | */ | |
bc7f75fa AK |
2405 | for (i = 0; i < length; i++) { |
2406 | for (j = 0; j < sizeof(u32); j++) { | |
2407 | *(tmp + j) = *bufptr++; | |
2408 | *sum += *(tmp + j); | |
2409 | } | |
2410 | ||
2411 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); | |
2412 | } | |
2413 | if (remaining) { | |
2414 | for (j = 0; j < sizeof(u32); j++) { | |
2415 | if (j < remaining) | |
2416 | *(tmp + j) = *bufptr++; | |
2417 | else | |
2418 | *(tmp + j) = 0; | |
2419 | ||
2420 | *sum += *(tmp + j); | |
2421 | } | |
2422 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); | |
2423 | } | |
2424 | ||
2425 | return 0; | |
2426 | } | |
2427 | ||
2428 | /** | |
2429 | * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface | |
2430 | * @hw: pointer to the HW structure | |
2431 | * @buffer: pointer to the host interface | |
2432 | * @length: size of the buffer | |
2433 | * | |
2434 | * Writes the DHCP information to the host interface. | |
2435 | **/ | |
2436 | s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) | |
2437 | { | |
2438 | struct e1000_host_mng_command_header hdr; | |
2439 | s32 ret_val; | |
2440 | u32 hicr; | |
2441 | ||
2442 | hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; | |
2443 | hdr.command_length = length; | |
2444 | hdr.reserved1 = 0; | |
2445 | hdr.reserved2 = 0; | |
2446 | hdr.checksum = 0; | |
2447 | ||
2448 | /* Enable the host interface */ | |
2449 | ret_val = e1000_mng_enable_host_if(hw); | |
2450 | if (ret_val) | |
2451 | return ret_val; | |
2452 | ||
2453 | /* Populate the host interface with the contents of "buffer". */ | |
2454 | ret_val = e1000_mng_host_if_write(hw, buffer, length, | |
2455 | sizeof(hdr), &(hdr.checksum)); | |
2456 | if (ret_val) | |
2457 | return ret_val; | |
2458 | ||
2459 | /* Write the manageability command header */ | |
2460 | ret_val = e1000_mng_write_cmd_header(hw, &hdr); | |
2461 | if (ret_val) | |
2462 | return ret_val; | |
2463 | ||
2464 | /* Tell the ARC a new command is pending. */ | |
2465 | hicr = er32(HICR); | |
2466 | ew32(HICR, hicr | E1000_HICR_C); | |
2467 | ||
2468 | return 0; | |
2469 | } | |
2470 | ||
2471 | /** | |
2472 | * e1000e_enable_mng_pass_thru - Enable processing of ARP's | |
2473 | * @hw: pointer to the HW structure | |
2474 | * | |
2475 | * Verifies the hardware needs to allow ARPs to be processed by the host. | |
2476 | **/ | |
2477 | bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw) | |
2478 | { | |
2479 | u32 manc; | |
2480 | u32 fwsm, factps; | |
2481 | bool ret_val = 0; | |
2482 | ||
2483 | manc = er32(MANC); | |
2484 | ||
2485 | if (!(manc & E1000_MANC_RCV_TCO_EN) || | |
2486 | !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) | |
2487 | return ret_val; | |
2488 | ||
2489 | if (hw->mac.arc_subsystem_valid) { | |
2490 | fwsm = er32(FWSM); | |
2491 | factps = er32(FACTPS); | |
2492 | ||
2493 | if (!(factps & E1000_FACTPS_MNGCG) && | |
2494 | ((fwsm & E1000_FWSM_MODE_MASK) == | |
2495 | (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) { | |
2496 | ret_val = 1; | |
2497 | return ret_val; | |
2498 | } | |
2499 | } else { | |
2500 | if ((manc & E1000_MANC_SMBUS_EN) && | |
2501 | !(manc & E1000_MANC_ASF_EN)) { | |
2502 | ret_val = 1; | |
2503 | return ret_val; | |
2504 | } | |
2505 | } | |
2506 | ||
2507 | return ret_val; | |
2508 | } | |
2509 | ||
69e3fd8c | 2510 | s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num) |
bc7f75fa AK |
2511 | { |
2512 | s32 ret_val; | |
2513 | u16 nvm_data; | |
2514 | ||
2515 | ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); | |
2516 | if (ret_val) { | |
2517 | hw_dbg(hw, "NVM Read Error\n"); | |
2518 | return ret_val; | |
2519 | } | |
69e3fd8c | 2520 | *pba_num = (u32)(nvm_data << 16); |
bc7f75fa AK |
2521 | |
2522 | ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data); | |
2523 | if (ret_val) { | |
2524 | hw_dbg(hw, "NVM Read Error\n"); | |
2525 | return ret_val; | |
2526 | } | |
69e3fd8c | 2527 | *pba_num |= nvm_data; |
bc7f75fa AK |
2528 | |
2529 | return 0; | |
2530 | } |