]>
Commit | Line | Data |
---|---|---|
bc7f75fa AK |
1 | /******************************************************************************* |
2 | ||
3 | Intel PRO/1000 Linux driver | |
ad68076e | 4 | Copyright(c) 1999 - 2008 Intel Corporation. |
bc7f75fa AK |
5 | |
6 | This program is free software; you can redistribute it and/or modify it | |
7 | under the terms and conditions of the GNU General Public License, | |
8 | version 2, as published by the Free Software Foundation. | |
9 | ||
10 | This program is distributed in the hope it will be useful, but WITHOUT | |
11 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
12 | FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
13 | more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License along with | |
16 | this program; if not, write to the Free Software Foundation, Inc., | |
17 | 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
18 | ||
19 | The full GNU General Public License is included in this distribution in | |
20 | the file called "COPYING". | |
21 | ||
22 | Contact Information: | |
23 | Linux NICS <linux.nics@intel.com> | |
24 | e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
25 | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
26 | ||
27 | *******************************************************************************/ | |
28 | ||
29 | #include <linux/module.h> | |
30 | #include <linux/types.h> | |
31 | #include <linux/init.h> | |
32 | #include <linux/pci.h> | |
33 | #include <linux/vmalloc.h> | |
34 | #include <linux/pagemap.h> | |
35 | #include <linux/delay.h> | |
36 | #include <linux/netdevice.h> | |
37 | #include <linux/tcp.h> | |
38 | #include <linux/ipv6.h> | |
39 | #include <net/checksum.h> | |
40 | #include <net/ip6_checksum.h> | |
41 | #include <linux/mii.h> | |
42 | #include <linux/ethtool.h> | |
43 | #include <linux/if_vlan.h> | |
44 | #include <linux/cpu.h> | |
45 | #include <linux/smp.h> | |
97ac8cae | 46 | #include <linux/pm_qos_params.h> |
bc7f75fa AK |
47 | |
48 | #include "e1000.h" | |
49 | ||
6f92a6a7 | 50 | #define DRV_VERSION "0.3.3.3-k6" |
bc7f75fa AK |
51 | char e1000e_driver_name[] = "e1000e"; |
52 | const char e1000e_driver_version[] = DRV_VERSION; | |
53 | ||
54 | static const struct e1000_info *e1000_info_tbl[] = { | |
55 | [board_82571] = &e1000_82571_info, | |
56 | [board_82572] = &e1000_82572_info, | |
57 | [board_82573] = &e1000_82573_info, | |
4662e82b | 58 | [board_82574] = &e1000_82574_info, |
bc7f75fa AK |
59 | [board_80003es2lan] = &e1000_es2_info, |
60 | [board_ich8lan] = &e1000_ich8_info, | |
61 | [board_ich9lan] = &e1000_ich9_info, | |
f4187b56 | 62 | [board_ich10lan] = &e1000_ich10_info, |
bc7f75fa AK |
63 | }; |
64 | ||
65 | #ifdef DEBUG | |
66 | /** | |
67 | * e1000_get_hw_dev_name - return device name string | |
68 | * used by hardware layer to print debugging information | |
69 | **/ | |
70 | char *e1000e_get_hw_dev_name(struct e1000_hw *hw) | |
71 | { | |
589c085f | 72 | return hw->adapter->netdev->name; |
bc7f75fa AK |
73 | } |
74 | #endif | |
75 | ||
76 | /** | |
77 | * e1000_desc_unused - calculate if we have unused descriptors | |
78 | **/ | |
79 | static int e1000_desc_unused(struct e1000_ring *ring) | |
80 | { | |
81 | if (ring->next_to_clean > ring->next_to_use) | |
82 | return ring->next_to_clean - ring->next_to_use - 1; | |
83 | ||
84 | return ring->count + ring->next_to_clean - ring->next_to_use - 1; | |
85 | } | |
86 | ||
87 | /** | |
ad68076e | 88 | * e1000_receive_skb - helper function to handle Rx indications |
bc7f75fa AK |
89 | * @adapter: board private structure |
90 | * @status: descriptor status field as written by hardware | |
91 | * @vlan: descriptor vlan field as written by hardware (no le/be conversion) | |
92 | * @skb: pointer to sk_buff to be indicated to stack | |
93 | **/ | |
94 | static void e1000_receive_skb(struct e1000_adapter *adapter, | |
95 | struct net_device *netdev, | |
96 | struct sk_buff *skb, | |
a39fe742 | 97 | u8 status, __le16 vlan) |
bc7f75fa AK |
98 | { |
99 | skb->protocol = eth_type_trans(skb, netdev); | |
100 | ||
101 | if (adapter->vlgrp && (status & E1000_RXD_STAT_VP)) | |
102 | vlan_hwaccel_receive_skb(skb, adapter->vlgrp, | |
38b22195 | 103 | le16_to_cpu(vlan)); |
bc7f75fa AK |
104 | else |
105 | netif_receive_skb(skb); | |
106 | ||
107 | netdev->last_rx = jiffies; | |
108 | } | |
109 | ||
110 | /** | |
111 | * e1000_rx_checksum - Receive Checksum Offload for 82543 | |
112 | * @adapter: board private structure | |
113 | * @status_err: receive descriptor status and error fields | |
114 | * @csum: receive descriptor csum field | |
115 | * @sk_buff: socket buffer with received data | |
116 | **/ | |
117 | static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, | |
118 | u32 csum, struct sk_buff *skb) | |
119 | { | |
120 | u16 status = (u16)status_err; | |
121 | u8 errors = (u8)(status_err >> 24); | |
122 | skb->ip_summed = CHECKSUM_NONE; | |
123 | ||
124 | /* Ignore Checksum bit is set */ | |
125 | if (status & E1000_RXD_STAT_IXSM) | |
126 | return; | |
127 | /* TCP/UDP checksum error bit is set */ | |
128 | if (errors & E1000_RXD_ERR_TCPE) { | |
129 | /* let the stack verify checksum errors */ | |
130 | adapter->hw_csum_err++; | |
131 | return; | |
132 | } | |
133 | ||
134 | /* TCP/UDP Checksum has not been calculated */ | |
135 | if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) | |
136 | return; | |
137 | ||
138 | /* It must be a TCP or UDP packet with a valid checksum */ | |
139 | if (status & E1000_RXD_STAT_TCPCS) { | |
140 | /* TCP checksum is good */ | |
141 | skb->ip_summed = CHECKSUM_UNNECESSARY; | |
142 | } else { | |
ad68076e BA |
143 | /* |
144 | * IP fragment with UDP payload | |
145 | * Hardware complements the payload checksum, so we undo it | |
bc7f75fa AK |
146 | * and then put the value in host order for further stack use. |
147 | */ | |
a39fe742 AV |
148 | __sum16 sum = (__force __sum16)htons(csum); |
149 | skb->csum = csum_unfold(~sum); | |
bc7f75fa AK |
150 | skb->ip_summed = CHECKSUM_COMPLETE; |
151 | } | |
152 | adapter->hw_csum_good++; | |
153 | } | |
154 | ||
155 | /** | |
156 | * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended | |
157 | * @adapter: address of board private structure | |
158 | **/ | |
159 | static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, | |
160 | int cleaned_count) | |
161 | { | |
162 | struct net_device *netdev = adapter->netdev; | |
163 | struct pci_dev *pdev = adapter->pdev; | |
164 | struct e1000_ring *rx_ring = adapter->rx_ring; | |
165 | struct e1000_rx_desc *rx_desc; | |
166 | struct e1000_buffer *buffer_info; | |
167 | struct sk_buff *skb; | |
168 | unsigned int i; | |
169 | unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; | |
170 | ||
171 | i = rx_ring->next_to_use; | |
172 | buffer_info = &rx_ring->buffer_info[i]; | |
173 | ||
174 | while (cleaned_count--) { | |
175 | skb = buffer_info->skb; | |
176 | if (skb) { | |
177 | skb_trim(skb, 0); | |
178 | goto map_skb; | |
179 | } | |
180 | ||
181 | skb = netdev_alloc_skb(netdev, bufsz); | |
182 | if (!skb) { | |
183 | /* Better luck next round */ | |
184 | adapter->alloc_rx_buff_failed++; | |
185 | break; | |
186 | } | |
187 | ||
ad68076e BA |
188 | /* |
189 | * Make buffer alignment 2 beyond a 16 byte boundary | |
bc7f75fa AK |
190 | * this will result in a 16 byte aligned IP header after |
191 | * the 14 byte MAC header is removed | |
192 | */ | |
193 | skb_reserve(skb, NET_IP_ALIGN); | |
194 | ||
195 | buffer_info->skb = skb; | |
196 | map_skb: | |
197 | buffer_info->dma = pci_map_single(pdev, skb->data, | |
198 | adapter->rx_buffer_len, | |
199 | PCI_DMA_FROMDEVICE); | |
8d8bb39b | 200 | if (pci_dma_mapping_error(pdev, buffer_info->dma)) { |
bc7f75fa AK |
201 | dev_err(&pdev->dev, "RX DMA map failed\n"); |
202 | adapter->rx_dma_failed++; | |
203 | break; | |
204 | } | |
205 | ||
206 | rx_desc = E1000_RX_DESC(*rx_ring, i); | |
207 | rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); | |
208 | ||
209 | i++; | |
210 | if (i == rx_ring->count) | |
211 | i = 0; | |
212 | buffer_info = &rx_ring->buffer_info[i]; | |
213 | } | |
214 | ||
215 | if (rx_ring->next_to_use != i) { | |
216 | rx_ring->next_to_use = i; | |
217 | if (i-- == 0) | |
218 | i = (rx_ring->count - 1); | |
219 | ||
ad68076e BA |
220 | /* |
221 | * Force memory writes to complete before letting h/w | |
bc7f75fa AK |
222 | * know there are new descriptors to fetch. (Only |
223 | * applicable for weak-ordered memory model archs, | |
ad68076e BA |
224 | * such as IA-64). |
225 | */ | |
bc7f75fa AK |
226 | wmb(); |
227 | writel(i, adapter->hw.hw_addr + rx_ring->tail); | |
228 | } | |
229 | } | |
230 | ||
231 | /** | |
232 | * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split | |
233 | * @adapter: address of board private structure | |
234 | **/ | |
235 | static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, | |
236 | int cleaned_count) | |
237 | { | |
238 | struct net_device *netdev = adapter->netdev; | |
239 | struct pci_dev *pdev = adapter->pdev; | |
240 | union e1000_rx_desc_packet_split *rx_desc; | |
241 | struct e1000_ring *rx_ring = adapter->rx_ring; | |
242 | struct e1000_buffer *buffer_info; | |
243 | struct e1000_ps_page *ps_page; | |
244 | struct sk_buff *skb; | |
245 | unsigned int i, j; | |
246 | ||
247 | i = rx_ring->next_to_use; | |
248 | buffer_info = &rx_ring->buffer_info[i]; | |
249 | ||
250 | while (cleaned_count--) { | |
251 | rx_desc = E1000_RX_DESC_PS(*rx_ring, i); | |
252 | ||
253 | for (j = 0; j < PS_PAGE_BUFFERS; j++) { | |
47f44e40 AK |
254 | ps_page = &buffer_info->ps_pages[j]; |
255 | if (j >= adapter->rx_ps_pages) { | |
256 | /* all unused desc entries get hw null ptr */ | |
a39fe742 | 257 | rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0); |
47f44e40 AK |
258 | continue; |
259 | } | |
260 | if (!ps_page->page) { | |
261 | ps_page->page = alloc_page(GFP_ATOMIC); | |
bc7f75fa | 262 | if (!ps_page->page) { |
47f44e40 AK |
263 | adapter->alloc_rx_buff_failed++; |
264 | goto no_buffers; | |
265 | } | |
266 | ps_page->dma = pci_map_page(pdev, | |
267 | ps_page->page, | |
268 | 0, PAGE_SIZE, | |
269 | PCI_DMA_FROMDEVICE); | |
8d8bb39b | 270 | if (pci_dma_mapping_error(pdev, ps_page->dma)) { |
47f44e40 AK |
271 | dev_err(&adapter->pdev->dev, |
272 | "RX DMA page map failed\n"); | |
273 | adapter->rx_dma_failed++; | |
274 | goto no_buffers; | |
bc7f75fa | 275 | } |
bc7f75fa | 276 | } |
47f44e40 AK |
277 | /* |
278 | * Refresh the desc even if buffer_addrs | |
279 | * didn't change because each write-back | |
280 | * erases this info. | |
281 | */ | |
282 | rx_desc->read.buffer_addr[j+1] = | |
283 | cpu_to_le64(ps_page->dma); | |
bc7f75fa AK |
284 | } |
285 | ||
286 | skb = netdev_alloc_skb(netdev, | |
287 | adapter->rx_ps_bsize0 + NET_IP_ALIGN); | |
288 | ||
289 | if (!skb) { | |
290 | adapter->alloc_rx_buff_failed++; | |
291 | break; | |
292 | } | |
293 | ||
ad68076e BA |
294 | /* |
295 | * Make buffer alignment 2 beyond a 16 byte boundary | |
bc7f75fa AK |
296 | * this will result in a 16 byte aligned IP header after |
297 | * the 14 byte MAC header is removed | |
298 | */ | |
299 | skb_reserve(skb, NET_IP_ALIGN); | |
300 | ||
301 | buffer_info->skb = skb; | |
302 | buffer_info->dma = pci_map_single(pdev, skb->data, | |
303 | adapter->rx_ps_bsize0, | |
304 | PCI_DMA_FROMDEVICE); | |
8d8bb39b | 305 | if (pci_dma_mapping_error(pdev, buffer_info->dma)) { |
bc7f75fa AK |
306 | dev_err(&pdev->dev, "RX DMA map failed\n"); |
307 | adapter->rx_dma_failed++; | |
308 | /* cleanup skb */ | |
309 | dev_kfree_skb_any(skb); | |
310 | buffer_info->skb = NULL; | |
311 | break; | |
312 | } | |
313 | ||
314 | rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma); | |
315 | ||
316 | i++; | |
317 | if (i == rx_ring->count) | |
318 | i = 0; | |
319 | buffer_info = &rx_ring->buffer_info[i]; | |
320 | } | |
321 | ||
322 | no_buffers: | |
323 | if (rx_ring->next_to_use != i) { | |
324 | rx_ring->next_to_use = i; | |
325 | ||
326 | if (!(i--)) | |
327 | i = (rx_ring->count - 1); | |
328 | ||
ad68076e BA |
329 | /* |
330 | * Force memory writes to complete before letting h/w | |
bc7f75fa AK |
331 | * know there are new descriptors to fetch. (Only |
332 | * applicable for weak-ordered memory model archs, | |
ad68076e BA |
333 | * such as IA-64). |
334 | */ | |
bc7f75fa | 335 | wmb(); |
ad68076e BA |
336 | /* |
337 | * Hardware increments by 16 bytes, but packet split | |
bc7f75fa AK |
338 | * descriptors are 32 bytes...so we increment tail |
339 | * twice as much. | |
340 | */ | |
341 | writel(i<<1, adapter->hw.hw_addr + rx_ring->tail); | |
342 | } | |
343 | } | |
344 | ||
97ac8cae BA |
345 | /** |
346 | * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers | |
347 | * @adapter: address of board private structure | |
348 | * @rx_ring: pointer to receive ring structure | |
349 | * @cleaned_count: number of buffers to allocate this pass | |
350 | **/ | |
351 | ||
352 | static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter, | |
353 | int cleaned_count) | |
354 | { | |
355 | struct net_device *netdev = adapter->netdev; | |
356 | struct pci_dev *pdev = adapter->pdev; | |
357 | struct e1000_rx_desc *rx_desc; | |
358 | struct e1000_ring *rx_ring = adapter->rx_ring; | |
359 | struct e1000_buffer *buffer_info; | |
360 | struct sk_buff *skb; | |
361 | unsigned int i; | |
362 | unsigned int bufsz = 256 - | |
363 | 16 /* for skb_reserve */ - | |
364 | NET_IP_ALIGN; | |
365 | ||
366 | i = rx_ring->next_to_use; | |
367 | buffer_info = &rx_ring->buffer_info[i]; | |
368 | ||
369 | while (cleaned_count--) { | |
370 | skb = buffer_info->skb; | |
371 | if (skb) { | |
372 | skb_trim(skb, 0); | |
373 | goto check_page; | |
374 | } | |
375 | ||
376 | skb = netdev_alloc_skb(netdev, bufsz); | |
377 | if (unlikely(!skb)) { | |
378 | /* Better luck next round */ | |
379 | adapter->alloc_rx_buff_failed++; | |
380 | break; | |
381 | } | |
382 | ||
383 | /* Make buffer alignment 2 beyond a 16 byte boundary | |
384 | * this will result in a 16 byte aligned IP header after | |
385 | * the 14 byte MAC header is removed | |
386 | */ | |
387 | skb_reserve(skb, NET_IP_ALIGN); | |
388 | ||
389 | buffer_info->skb = skb; | |
390 | check_page: | |
391 | /* allocate a new page if necessary */ | |
392 | if (!buffer_info->page) { | |
393 | buffer_info->page = alloc_page(GFP_ATOMIC); | |
394 | if (unlikely(!buffer_info->page)) { | |
395 | adapter->alloc_rx_buff_failed++; | |
396 | break; | |
397 | } | |
398 | } | |
399 | ||
400 | if (!buffer_info->dma) | |
401 | buffer_info->dma = pci_map_page(pdev, | |
402 | buffer_info->page, 0, | |
403 | PAGE_SIZE, | |
404 | PCI_DMA_FROMDEVICE); | |
405 | ||
406 | rx_desc = E1000_RX_DESC(*rx_ring, i); | |
407 | rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); | |
408 | ||
409 | if (unlikely(++i == rx_ring->count)) | |
410 | i = 0; | |
411 | buffer_info = &rx_ring->buffer_info[i]; | |
412 | } | |
413 | ||
414 | if (likely(rx_ring->next_to_use != i)) { | |
415 | rx_ring->next_to_use = i; | |
416 | if (unlikely(i-- == 0)) | |
417 | i = (rx_ring->count - 1); | |
418 | ||
419 | /* Force memory writes to complete before letting h/w | |
420 | * know there are new descriptors to fetch. (Only | |
421 | * applicable for weak-ordered memory model archs, | |
422 | * such as IA-64). */ | |
423 | wmb(); | |
424 | writel(i, adapter->hw.hw_addr + rx_ring->tail); | |
425 | } | |
426 | } | |
427 | ||
bc7f75fa AK |
428 | /** |
429 | * e1000_clean_rx_irq - Send received data up the network stack; legacy | |
430 | * @adapter: board private structure | |
431 | * | |
432 | * the return value indicates whether actual cleaning was done, there | |
433 | * is no guarantee that everything was cleaned | |
434 | **/ | |
435 | static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, | |
436 | int *work_done, int work_to_do) | |
437 | { | |
438 | struct net_device *netdev = adapter->netdev; | |
439 | struct pci_dev *pdev = adapter->pdev; | |
440 | struct e1000_ring *rx_ring = adapter->rx_ring; | |
441 | struct e1000_rx_desc *rx_desc, *next_rxd; | |
442 | struct e1000_buffer *buffer_info, *next_buffer; | |
443 | u32 length; | |
444 | unsigned int i; | |
445 | int cleaned_count = 0; | |
446 | bool cleaned = 0; | |
447 | unsigned int total_rx_bytes = 0, total_rx_packets = 0; | |
448 | ||
449 | i = rx_ring->next_to_clean; | |
450 | rx_desc = E1000_RX_DESC(*rx_ring, i); | |
451 | buffer_info = &rx_ring->buffer_info[i]; | |
452 | ||
453 | while (rx_desc->status & E1000_RXD_STAT_DD) { | |
454 | struct sk_buff *skb; | |
455 | u8 status; | |
456 | ||
457 | if (*work_done >= work_to_do) | |
458 | break; | |
459 | (*work_done)++; | |
460 | ||
461 | status = rx_desc->status; | |
462 | skb = buffer_info->skb; | |
463 | buffer_info->skb = NULL; | |
464 | ||
465 | prefetch(skb->data - NET_IP_ALIGN); | |
466 | ||
467 | i++; | |
468 | if (i == rx_ring->count) | |
469 | i = 0; | |
470 | next_rxd = E1000_RX_DESC(*rx_ring, i); | |
471 | prefetch(next_rxd); | |
472 | ||
473 | next_buffer = &rx_ring->buffer_info[i]; | |
474 | ||
475 | cleaned = 1; | |
476 | cleaned_count++; | |
477 | pci_unmap_single(pdev, | |
478 | buffer_info->dma, | |
479 | adapter->rx_buffer_len, | |
480 | PCI_DMA_FROMDEVICE); | |
481 | buffer_info->dma = 0; | |
482 | ||
483 | length = le16_to_cpu(rx_desc->length); | |
484 | ||
485 | /* !EOP means multiple descriptors were used to store a single | |
486 | * packet, also make sure the frame isn't just CRC only */ | |
487 | if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) { | |
488 | /* All receives must fit into a single buffer */ | |
44defeb3 JK |
489 | e_dbg("%s: Receive packet consumed multiple buffers\n", |
490 | netdev->name); | |
bc7f75fa AK |
491 | /* recycle */ |
492 | buffer_info->skb = skb; | |
493 | goto next_desc; | |
494 | } | |
495 | ||
496 | if (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK) { | |
497 | /* recycle */ | |
498 | buffer_info->skb = skb; | |
499 | goto next_desc; | |
500 | } | |
501 | ||
bc7f75fa AK |
502 | total_rx_bytes += length; |
503 | total_rx_packets++; | |
504 | ||
ad68076e BA |
505 | /* |
506 | * code added for copybreak, this should improve | |
bc7f75fa | 507 | * performance for small packets with large amounts |
ad68076e BA |
508 | * of reassembly being done in the stack |
509 | */ | |
bc7f75fa AK |
510 | if (length < copybreak) { |
511 | struct sk_buff *new_skb = | |
512 | netdev_alloc_skb(netdev, length + NET_IP_ALIGN); | |
513 | if (new_skb) { | |
514 | skb_reserve(new_skb, NET_IP_ALIGN); | |
808ff676 BA |
515 | skb_copy_to_linear_data_offset(new_skb, |
516 | -NET_IP_ALIGN, | |
517 | (skb->data - | |
518 | NET_IP_ALIGN), | |
519 | (length + | |
520 | NET_IP_ALIGN)); | |
bc7f75fa AK |
521 | /* save the skb in buffer_info as good */ |
522 | buffer_info->skb = skb; | |
523 | skb = new_skb; | |
524 | } | |
525 | /* else just continue with the old one */ | |
526 | } | |
527 | /* end copybreak code */ | |
528 | skb_put(skb, length); | |
529 | ||
530 | /* Receive Checksum Offload */ | |
531 | e1000_rx_checksum(adapter, | |
532 | (u32)(status) | | |
533 | ((u32)(rx_desc->errors) << 24), | |
534 | le16_to_cpu(rx_desc->csum), skb); | |
535 | ||
536 | e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special); | |
537 | ||
538 | next_desc: | |
539 | rx_desc->status = 0; | |
540 | ||
541 | /* return some buffers to hardware, one at a time is too slow */ | |
542 | if (cleaned_count >= E1000_RX_BUFFER_WRITE) { | |
543 | adapter->alloc_rx_buf(adapter, cleaned_count); | |
544 | cleaned_count = 0; | |
545 | } | |
546 | ||
547 | /* use prefetched values */ | |
548 | rx_desc = next_rxd; | |
549 | buffer_info = next_buffer; | |
550 | } | |
551 | rx_ring->next_to_clean = i; | |
552 | ||
553 | cleaned_count = e1000_desc_unused(rx_ring); | |
554 | if (cleaned_count) | |
555 | adapter->alloc_rx_buf(adapter, cleaned_count); | |
556 | ||
bc7f75fa | 557 | adapter->total_rx_bytes += total_rx_bytes; |
7c25769f | 558 | adapter->total_rx_packets += total_rx_packets; |
41988692 | 559 | adapter->net_stats.rx_bytes += total_rx_bytes; |
7c25769f | 560 | adapter->net_stats.rx_packets += total_rx_packets; |
bc7f75fa AK |
561 | return cleaned; |
562 | } | |
563 | ||
bc7f75fa AK |
564 | static void e1000_put_txbuf(struct e1000_adapter *adapter, |
565 | struct e1000_buffer *buffer_info) | |
566 | { | |
567 | if (buffer_info->dma) { | |
568 | pci_unmap_page(adapter->pdev, buffer_info->dma, | |
569 | buffer_info->length, PCI_DMA_TODEVICE); | |
570 | buffer_info->dma = 0; | |
571 | } | |
572 | if (buffer_info->skb) { | |
573 | dev_kfree_skb_any(buffer_info->skb); | |
574 | buffer_info->skb = NULL; | |
575 | } | |
576 | } | |
577 | ||
578 | static void e1000_print_tx_hang(struct e1000_adapter *adapter) | |
579 | { | |
580 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
581 | unsigned int i = tx_ring->next_to_clean; | |
582 | unsigned int eop = tx_ring->buffer_info[i].next_to_watch; | |
583 | struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop); | |
bc7f75fa AK |
584 | |
585 | /* detected Tx unit hang */ | |
44defeb3 JK |
586 | e_err("Detected Tx Unit Hang:\n" |
587 | " TDH <%x>\n" | |
588 | " TDT <%x>\n" | |
589 | " next_to_use <%x>\n" | |
590 | " next_to_clean <%x>\n" | |
591 | "buffer_info[next_to_clean]:\n" | |
592 | " time_stamp <%lx>\n" | |
593 | " next_to_watch <%x>\n" | |
594 | " jiffies <%lx>\n" | |
595 | " next_to_watch.status <%x>\n", | |
596 | readl(adapter->hw.hw_addr + tx_ring->head), | |
597 | readl(adapter->hw.hw_addr + tx_ring->tail), | |
598 | tx_ring->next_to_use, | |
599 | tx_ring->next_to_clean, | |
600 | tx_ring->buffer_info[eop].time_stamp, | |
601 | eop, | |
602 | jiffies, | |
603 | eop_desc->upper.fields.status); | |
bc7f75fa AK |
604 | } |
605 | ||
606 | /** | |
607 | * e1000_clean_tx_irq - Reclaim resources after transmit completes | |
608 | * @adapter: board private structure | |
609 | * | |
610 | * the return value indicates whether actual cleaning was done, there | |
611 | * is no guarantee that everything was cleaned | |
612 | **/ | |
613 | static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) | |
614 | { | |
615 | struct net_device *netdev = adapter->netdev; | |
616 | struct e1000_hw *hw = &adapter->hw; | |
617 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
618 | struct e1000_tx_desc *tx_desc, *eop_desc; | |
619 | struct e1000_buffer *buffer_info; | |
620 | unsigned int i, eop; | |
621 | unsigned int count = 0; | |
622 | bool cleaned = 0; | |
623 | unsigned int total_tx_bytes = 0, total_tx_packets = 0; | |
624 | ||
625 | i = tx_ring->next_to_clean; | |
626 | eop = tx_ring->buffer_info[i].next_to_watch; | |
627 | eop_desc = E1000_TX_DESC(*tx_ring, eop); | |
628 | ||
629 | while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { | |
630 | for (cleaned = 0; !cleaned; ) { | |
631 | tx_desc = E1000_TX_DESC(*tx_ring, i); | |
632 | buffer_info = &tx_ring->buffer_info[i]; | |
633 | cleaned = (i == eop); | |
634 | ||
635 | if (cleaned) { | |
636 | struct sk_buff *skb = buffer_info->skb; | |
637 | unsigned int segs, bytecount; | |
638 | segs = skb_shinfo(skb)->gso_segs ?: 1; | |
639 | /* multiply data chunks by size of headers */ | |
640 | bytecount = ((segs - 1) * skb_headlen(skb)) + | |
641 | skb->len; | |
642 | total_tx_packets += segs; | |
643 | total_tx_bytes += bytecount; | |
644 | } | |
645 | ||
646 | e1000_put_txbuf(adapter, buffer_info); | |
647 | tx_desc->upper.data = 0; | |
648 | ||
649 | i++; | |
650 | if (i == tx_ring->count) | |
651 | i = 0; | |
652 | } | |
653 | ||
654 | eop = tx_ring->buffer_info[i].next_to_watch; | |
655 | eop_desc = E1000_TX_DESC(*tx_ring, eop); | |
656 | #define E1000_TX_WEIGHT 64 | |
657 | /* weight of a sort for tx, to avoid endless transmit cleanup */ | |
658 | if (count++ == E1000_TX_WEIGHT) | |
659 | break; | |
660 | } | |
661 | ||
662 | tx_ring->next_to_clean = i; | |
663 | ||
664 | #define TX_WAKE_THRESHOLD 32 | |
665 | if (cleaned && netif_carrier_ok(netdev) && | |
666 | e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) { | |
667 | /* Make sure that anybody stopping the queue after this | |
668 | * sees the new next_to_clean. | |
669 | */ | |
670 | smp_mb(); | |
671 | ||
672 | if (netif_queue_stopped(netdev) && | |
673 | !(test_bit(__E1000_DOWN, &adapter->state))) { | |
674 | netif_wake_queue(netdev); | |
675 | ++adapter->restart_queue; | |
676 | } | |
677 | } | |
678 | ||
679 | if (adapter->detect_tx_hung) { | |
ad68076e BA |
680 | /* |
681 | * Detect a transmit hang in hardware, this serializes the | |
682 | * check with the clearing of time_stamp and movement of i | |
683 | */ | |
bc7f75fa AK |
684 | adapter->detect_tx_hung = 0; |
685 | if (tx_ring->buffer_info[eop].dma && | |
686 | time_after(jiffies, tx_ring->buffer_info[eop].time_stamp | |
687 | + (adapter->tx_timeout_factor * HZ)) | |
ad68076e | 688 | && !(er32(STATUS) & E1000_STATUS_TXOFF)) { |
bc7f75fa AK |
689 | e1000_print_tx_hang(adapter); |
690 | netif_stop_queue(netdev); | |
691 | } | |
692 | } | |
693 | adapter->total_tx_bytes += total_tx_bytes; | |
694 | adapter->total_tx_packets += total_tx_packets; | |
41988692 | 695 | adapter->net_stats.tx_bytes += total_tx_bytes; |
7c25769f | 696 | adapter->net_stats.tx_packets += total_tx_packets; |
bc7f75fa AK |
697 | return cleaned; |
698 | } | |
699 | ||
bc7f75fa AK |
700 | /** |
701 | * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split | |
702 | * @adapter: board private structure | |
703 | * | |
704 | * the return value indicates whether actual cleaning was done, there | |
705 | * is no guarantee that everything was cleaned | |
706 | **/ | |
707 | static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, | |
708 | int *work_done, int work_to_do) | |
709 | { | |
710 | union e1000_rx_desc_packet_split *rx_desc, *next_rxd; | |
711 | struct net_device *netdev = adapter->netdev; | |
712 | struct pci_dev *pdev = adapter->pdev; | |
713 | struct e1000_ring *rx_ring = adapter->rx_ring; | |
714 | struct e1000_buffer *buffer_info, *next_buffer; | |
715 | struct e1000_ps_page *ps_page; | |
716 | struct sk_buff *skb; | |
717 | unsigned int i, j; | |
718 | u32 length, staterr; | |
719 | int cleaned_count = 0; | |
720 | bool cleaned = 0; | |
721 | unsigned int total_rx_bytes = 0, total_rx_packets = 0; | |
722 | ||
723 | i = rx_ring->next_to_clean; | |
724 | rx_desc = E1000_RX_DESC_PS(*rx_ring, i); | |
725 | staterr = le32_to_cpu(rx_desc->wb.middle.status_error); | |
726 | buffer_info = &rx_ring->buffer_info[i]; | |
727 | ||
728 | while (staterr & E1000_RXD_STAT_DD) { | |
729 | if (*work_done >= work_to_do) | |
730 | break; | |
731 | (*work_done)++; | |
732 | skb = buffer_info->skb; | |
733 | ||
734 | /* in the packet split case this is header only */ | |
735 | prefetch(skb->data - NET_IP_ALIGN); | |
736 | ||
737 | i++; | |
738 | if (i == rx_ring->count) | |
739 | i = 0; | |
740 | next_rxd = E1000_RX_DESC_PS(*rx_ring, i); | |
741 | prefetch(next_rxd); | |
742 | ||
743 | next_buffer = &rx_ring->buffer_info[i]; | |
744 | ||
745 | cleaned = 1; | |
746 | cleaned_count++; | |
747 | pci_unmap_single(pdev, buffer_info->dma, | |
748 | adapter->rx_ps_bsize0, | |
749 | PCI_DMA_FROMDEVICE); | |
750 | buffer_info->dma = 0; | |
751 | ||
752 | if (!(staterr & E1000_RXD_STAT_EOP)) { | |
44defeb3 JK |
753 | e_dbg("%s: Packet Split buffers didn't pick up the " |
754 | "full packet\n", netdev->name); | |
bc7f75fa AK |
755 | dev_kfree_skb_irq(skb); |
756 | goto next_desc; | |
757 | } | |
758 | ||
759 | if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) { | |
760 | dev_kfree_skb_irq(skb); | |
761 | goto next_desc; | |
762 | } | |
763 | ||
764 | length = le16_to_cpu(rx_desc->wb.middle.length0); | |
765 | ||
766 | if (!length) { | |
44defeb3 JK |
767 | e_dbg("%s: Last part of the packet spanning multiple " |
768 | "descriptors\n", netdev->name); | |
bc7f75fa AK |
769 | dev_kfree_skb_irq(skb); |
770 | goto next_desc; | |
771 | } | |
772 | ||
773 | /* Good Receive */ | |
774 | skb_put(skb, length); | |
775 | ||
776 | { | |
ad68076e BA |
777 | /* |
778 | * this looks ugly, but it seems compiler issues make it | |
779 | * more efficient than reusing j | |
780 | */ | |
bc7f75fa AK |
781 | int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]); |
782 | ||
ad68076e BA |
783 | /* |
784 | * page alloc/put takes too long and effects small packet | |
785 | * throughput, so unsplit small packets and save the alloc/put | |
786 | * only valid in softirq (napi) context to call kmap_* | |
787 | */ | |
bc7f75fa AK |
788 | if (l1 && (l1 <= copybreak) && |
789 | ((length + l1) <= adapter->rx_ps_bsize0)) { | |
790 | u8 *vaddr; | |
791 | ||
47f44e40 | 792 | ps_page = &buffer_info->ps_pages[0]; |
bc7f75fa | 793 | |
ad68076e BA |
794 | /* |
795 | * there is no documentation about how to call | |
bc7f75fa | 796 | * kmap_atomic, so we can't hold the mapping |
ad68076e BA |
797 | * very long |
798 | */ | |
bc7f75fa AK |
799 | pci_dma_sync_single_for_cpu(pdev, ps_page->dma, |
800 | PAGE_SIZE, PCI_DMA_FROMDEVICE); | |
801 | vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ); | |
802 | memcpy(skb_tail_pointer(skb), vaddr, l1); | |
803 | kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ); | |
804 | pci_dma_sync_single_for_device(pdev, ps_page->dma, | |
805 | PAGE_SIZE, PCI_DMA_FROMDEVICE); | |
140a7480 | 806 | |
bc7f75fa AK |
807 | skb_put(skb, l1); |
808 | goto copydone; | |
809 | } /* if */ | |
810 | } | |
811 | ||
812 | for (j = 0; j < PS_PAGE_BUFFERS; j++) { | |
813 | length = le16_to_cpu(rx_desc->wb.upper.length[j]); | |
814 | if (!length) | |
815 | break; | |
816 | ||
47f44e40 | 817 | ps_page = &buffer_info->ps_pages[j]; |
bc7f75fa AK |
818 | pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE, |
819 | PCI_DMA_FROMDEVICE); | |
820 | ps_page->dma = 0; | |
821 | skb_fill_page_desc(skb, j, ps_page->page, 0, length); | |
822 | ps_page->page = NULL; | |
823 | skb->len += length; | |
824 | skb->data_len += length; | |
825 | skb->truesize += length; | |
826 | } | |
827 | ||
bc7f75fa AK |
828 | copydone: |
829 | total_rx_bytes += skb->len; | |
830 | total_rx_packets++; | |
831 | ||
832 | e1000_rx_checksum(adapter, staterr, le16_to_cpu( | |
833 | rx_desc->wb.lower.hi_dword.csum_ip.csum), skb); | |
834 | ||
835 | if (rx_desc->wb.upper.header_status & | |
836 | cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)) | |
837 | adapter->rx_hdr_split++; | |
838 | ||
839 | e1000_receive_skb(adapter, netdev, skb, | |
840 | staterr, rx_desc->wb.middle.vlan); | |
841 | ||
842 | next_desc: | |
843 | rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF); | |
844 | buffer_info->skb = NULL; | |
845 | ||
846 | /* return some buffers to hardware, one at a time is too slow */ | |
847 | if (cleaned_count >= E1000_RX_BUFFER_WRITE) { | |
848 | adapter->alloc_rx_buf(adapter, cleaned_count); | |
849 | cleaned_count = 0; | |
850 | } | |
851 | ||
852 | /* use prefetched values */ | |
853 | rx_desc = next_rxd; | |
854 | buffer_info = next_buffer; | |
855 | ||
856 | staterr = le32_to_cpu(rx_desc->wb.middle.status_error); | |
857 | } | |
858 | rx_ring->next_to_clean = i; | |
859 | ||
860 | cleaned_count = e1000_desc_unused(rx_ring); | |
861 | if (cleaned_count) | |
862 | adapter->alloc_rx_buf(adapter, cleaned_count); | |
863 | ||
bc7f75fa | 864 | adapter->total_rx_bytes += total_rx_bytes; |
7c25769f | 865 | adapter->total_rx_packets += total_rx_packets; |
41988692 | 866 | adapter->net_stats.rx_bytes += total_rx_bytes; |
7c25769f | 867 | adapter->net_stats.rx_packets += total_rx_packets; |
bc7f75fa AK |
868 | return cleaned; |
869 | } | |
870 | ||
97ac8cae BA |
871 | /** |
872 | * e1000_consume_page - helper function | |
873 | **/ | |
874 | static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb, | |
875 | u16 length) | |
876 | { | |
877 | bi->page = NULL; | |
878 | skb->len += length; | |
879 | skb->data_len += length; | |
880 | skb->truesize += length; | |
881 | } | |
882 | ||
883 | /** | |
884 | * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy | |
885 | * @adapter: board private structure | |
886 | * | |
887 | * the return value indicates whether actual cleaning was done, there | |
888 | * is no guarantee that everything was cleaned | |
889 | **/ | |
890 | ||
891 | static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, | |
892 | int *work_done, int work_to_do) | |
893 | { | |
894 | struct net_device *netdev = adapter->netdev; | |
895 | struct pci_dev *pdev = adapter->pdev; | |
896 | struct e1000_ring *rx_ring = adapter->rx_ring; | |
897 | struct e1000_rx_desc *rx_desc, *next_rxd; | |
898 | struct e1000_buffer *buffer_info, *next_buffer; | |
899 | u32 length; | |
900 | unsigned int i; | |
901 | int cleaned_count = 0; | |
902 | bool cleaned = false; | |
903 | unsigned int total_rx_bytes=0, total_rx_packets=0; | |
904 | ||
905 | i = rx_ring->next_to_clean; | |
906 | rx_desc = E1000_RX_DESC(*rx_ring, i); | |
907 | buffer_info = &rx_ring->buffer_info[i]; | |
908 | ||
909 | while (rx_desc->status & E1000_RXD_STAT_DD) { | |
910 | struct sk_buff *skb; | |
911 | u8 status; | |
912 | ||
913 | if (*work_done >= work_to_do) | |
914 | break; | |
915 | (*work_done)++; | |
916 | ||
917 | status = rx_desc->status; | |
918 | skb = buffer_info->skb; | |
919 | buffer_info->skb = NULL; | |
920 | ||
921 | ++i; | |
922 | if (i == rx_ring->count) | |
923 | i = 0; | |
924 | next_rxd = E1000_RX_DESC(*rx_ring, i); | |
925 | prefetch(next_rxd); | |
926 | ||
927 | next_buffer = &rx_ring->buffer_info[i]; | |
928 | ||
929 | cleaned = true; | |
930 | cleaned_count++; | |
931 | pci_unmap_page(pdev, buffer_info->dma, PAGE_SIZE, | |
932 | PCI_DMA_FROMDEVICE); | |
933 | buffer_info->dma = 0; | |
934 | ||
935 | length = le16_to_cpu(rx_desc->length); | |
936 | ||
937 | /* errors is only valid for DD + EOP descriptors */ | |
938 | if (unlikely((status & E1000_RXD_STAT_EOP) && | |
939 | (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) { | |
940 | /* recycle both page and skb */ | |
941 | buffer_info->skb = skb; | |
942 | /* an error means any chain goes out the window | |
943 | * too */ | |
944 | if (rx_ring->rx_skb_top) | |
945 | dev_kfree_skb(rx_ring->rx_skb_top); | |
946 | rx_ring->rx_skb_top = NULL; | |
947 | goto next_desc; | |
948 | } | |
949 | ||
950 | #define rxtop rx_ring->rx_skb_top | |
951 | if (!(status & E1000_RXD_STAT_EOP)) { | |
952 | /* this descriptor is only the beginning (or middle) */ | |
953 | if (!rxtop) { | |
954 | /* this is the beginning of a chain */ | |
955 | rxtop = skb; | |
956 | skb_fill_page_desc(rxtop, 0, buffer_info->page, | |
957 | 0, length); | |
958 | } else { | |
959 | /* this is the middle of a chain */ | |
960 | skb_fill_page_desc(rxtop, | |
961 | skb_shinfo(rxtop)->nr_frags, | |
962 | buffer_info->page, 0, length); | |
963 | /* re-use the skb, only consumed the page */ | |
964 | buffer_info->skb = skb; | |
965 | } | |
966 | e1000_consume_page(buffer_info, rxtop, length); | |
967 | goto next_desc; | |
968 | } else { | |
969 | if (rxtop) { | |
970 | /* end of the chain */ | |
971 | skb_fill_page_desc(rxtop, | |
972 | skb_shinfo(rxtop)->nr_frags, | |
973 | buffer_info->page, 0, length); | |
974 | /* re-use the current skb, we only consumed the | |
975 | * page */ | |
976 | buffer_info->skb = skb; | |
977 | skb = rxtop; | |
978 | rxtop = NULL; | |
979 | e1000_consume_page(buffer_info, skb, length); | |
980 | } else { | |
981 | /* no chain, got EOP, this buf is the packet | |
982 | * copybreak to save the put_page/alloc_page */ | |
983 | if (length <= copybreak && | |
984 | skb_tailroom(skb) >= length) { | |
985 | u8 *vaddr; | |
986 | vaddr = kmap_atomic(buffer_info->page, | |
987 | KM_SKB_DATA_SOFTIRQ); | |
988 | memcpy(skb_tail_pointer(skb), vaddr, | |
989 | length); | |
990 | kunmap_atomic(vaddr, | |
991 | KM_SKB_DATA_SOFTIRQ); | |
992 | /* re-use the page, so don't erase | |
993 | * buffer_info->page */ | |
994 | skb_put(skb, length); | |
995 | } else { | |
996 | skb_fill_page_desc(skb, 0, | |
997 | buffer_info->page, 0, | |
998 | length); | |
999 | e1000_consume_page(buffer_info, skb, | |
1000 | length); | |
1001 | } | |
1002 | } | |
1003 | } | |
1004 | ||
1005 | /* Receive Checksum Offload XXX recompute due to CRC strip? */ | |
1006 | e1000_rx_checksum(adapter, | |
1007 | (u32)(status) | | |
1008 | ((u32)(rx_desc->errors) << 24), | |
1009 | le16_to_cpu(rx_desc->csum), skb); | |
1010 | ||
1011 | /* probably a little skewed due to removing CRC */ | |
1012 | total_rx_bytes += skb->len; | |
1013 | total_rx_packets++; | |
1014 | ||
1015 | /* eth type trans needs skb->data to point to something */ | |
1016 | if (!pskb_may_pull(skb, ETH_HLEN)) { | |
44defeb3 | 1017 | e_err("pskb_may_pull failed.\n"); |
97ac8cae BA |
1018 | dev_kfree_skb(skb); |
1019 | goto next_desc; | |
1020 | } | |
1021 | ||
1022 | e1000_receive_skb(adapter, netdev, skb, status, | |
1023 | rx_desc->special); | |
1024 | ||
1025 | next_desc: | |
1026 | rx_desc->status = 0; | |
1027 | ||
1028 | /* return some buffers to hardware, one at a time is too slow */ | |
1029 | if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) { | |
1030 | adapter->alloc_rx_buf(adapter, cleaned_count); | |
1031 | cleaned_count = 0; | |
1032 | } | |
1033 | ||
1034 | /* use prefetched values */ | |
1035 | rx_desc = next_rxd; | |
1036 | buffer_info = next_buffer; | |
1037 | } | |
1038 | rx_ring->next_to_clean = i; | |
1039 | ||
1040 | cleaned_count = e1000_desc_unused(rx_ring); | |
1041 | if (cleaned_count) | |
1042 | adapter->alloc_rx_buf(adapter, cleaned_count); | |
1043 | ||
1044 | adapter->total_rx_bytes += total_rx_bytes; | |
1045 | adapter->total_rx_packets += total_rx_packets; | |
1046 | adapter->net_stats.rx_bytes += total_rx_bytes; | |
1047 | adapter->net_stats.rx_packets += total_rx_packets; | |
1048 | return cleaned; | |
1049 | } | |
1050 | ||
bc7f75fa AK |
1051 | /** |
1052 | * e1000_clean_rx_ring - Free Rx Buffers per Queue | |
1053 | * @adapter: board private structure | |
1054 | **/ | |
1055 | static void e1000_clean_rx_ring(struct e1000_adapter *adapter) | |
1056 | { | |
1057 | struct e1000_ring *rx_ring = adapter->rx_ring; | |
1058 | struct e1000_buffer *buffer_info; | |
1059 | struct e1000_ps_page *ps_page; | |
1060 | struct pci_dev *pdev = adapter->pdev; | |
bc7f75fa AK |
1061 | unsigned int i, j; |
1062 | ||
1063 | /* Free all the Rx ring sk_buffs */ | |
1064 | for (i = 0; i < rx_ring->count; i++) { | |
1065 | buffer_info = &rx_ring->buffer_info[i]; | |
1066 | if (buffer_info->dma) { | |
1067 | if (adapter->clean_rx == e1000_clean_rx_irq) | |
1068 | pci_unmap_single(pdev, buffer_info->dma, | |
1069 | adapter->rx_buffer_len, | |
1070 | PCI_DMA_FROMDEVICE); | |
97ac8cae BA |
1071 | else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq) |
1072 | pci_unmap_page(pdev, buffer_info->dma, | |
1073 | PAGE_SIZE, | |
1074 | PCI_DMA_FROMDEVICE); | |
bc7f75fa AK |
1075 | else if (adapter->clean_rx == e1000_clean_rx_irq_ps) |
1076 | pci_unmap_single(pdev, buffer_info->dma, | |
1077 | adapter->rx_ps_bsize0, | |
1078 | PCI_DMA_FROMDEVICE); | |
1079 | buffer_info->dma = 0; | |
1080 | } | |
1081 | ||
97ac8cae BA |
1082 | if (buffer_info->page) { |
1083 | put_page(buffer_info->page); | |
1084 | buffer_info->page = NULL; | |
1085 | } | |
1086 | ||
bc7f75fa AK |
1087 | if (buffer_info->skb) { |
1088 | dev_kfree_skb(buffer_info->skb); | |
1089 | buffer_info->skb = NULL; | |
1090 | } | |
1091 | ||
1092 | for (j = 0; j < PS_PAGE_BUFFERS; j++) { | |
47f44e40 | 1093 | ps_page = &buffer_info->ps_pages[j]; |
bc7f75fa AK |
1094 | if (!ps_page->page) |
1095 | break; | |
1096 | pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE, | |
1097 | PCI_DMA_FROMDEVICE); | |
1098 | ps_page->dma = 0; | |
1099 | put_page(ps_page->page); | |
1100 | ps_page->page = NULL; | |
1101 | } | |
1102 | } | |
1103 | ||
1104 | /* there also may be some cached data from a chained receive */ | |
1105 | if (rx_ring->rx_skb_top) { | |
1106 | dev_kfree_skb(rx_ring->rx_skb_top); | |
1107 | rx_ring->rx_skb_top = NULL; | |
1108 | } | |
1109 | ||
bc7f75fa AK |
1110 | /* Zero out the descriptor ring */ |
1111 | memset(rx_ring->desc, 0, rx_ring->size); | |
1112 | ||
1113 | rx_ring->next_to_clean = 0; | |
1114 | rx_ring->next_to_use = 0; | |
1115 | ||
1116 | writel(0, adapter->hw.hw_addr + rx_ring->head); | |
1117 | writel(0, adapter->hw.hw_addr + rx_ring->tail); | |
1118 | } | |
1119 | ||
a8f88ff5 JB |
1120 | static void e1000e_downshift_workaround(struct work_struct *work) |
1121 | { | |
1122 | struct e1000_adapter *adapter = container_of(work, | |
1123 | struct e1000_adapter, downshift_task); | |
1124 | ||
1125 | e1000e_gig_downshift_workaround_ich8lan(&adapter->hw); | |
1126 | } | |
1127 | ||
bc7f75fa AK |
1128 | /** |
1129 | * e1000_intr_msi - Interrupt Handler | |
1130 | * @irq: interrupt number | |
1131 | * @data: pointer to a network interface device structure | |
1132 | **/ | |
1133 | static irqreturn_t e1000_intr_msi(int irq, void *data) | |
1134 | { | |
1135 | struct net_device *netdev = data; | |
1136 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
1137 | struct e1000_hw *hw = &adapter->hw; | |
1138 | u32 icr = er32(ICR); | |
1139 | ||
ad68076e BA |
1140 | /* |
1141 | * read ICR disables interrupts using IAM | |
1142 | */ | |
bc7f75fa AK |
1143 | |
1144 | if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { | |
1145 | hw->mac.get_link_status = 1; | |
ad68076e BA |
1146 | /* |
1147 | * ICH8 workaround-- Call gig speed drop workaround on cable | |
1148 | * disconnect (LSC) before accessing any PHY registers | |
1149 | */ | |
bc7f75fa AK |
1150 | if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && |
1151 | (!(er32(STATUS) & E1000_STATUS_LU))) | |
a8f88ff5 | 1152 | schedule_work(&adapter->downshift_task); |
bc7f75fa | 1153 | |
ad68076e BA |
1154 | /* |
1155 | * 80003ES2LAN workaround-- For packet buffer work-around on | |
bc7f75fa | 1156 | * link down event; disable receives here in the ISR and reset |
ad68076e BA |
1157 | * adapter in watchdog |
1158 | */ | |
bc7f75fa AK |
1159 | if (netif_carrier_ok(netdev) && |
1160 | adapter->flags & FLAG_RX_NEEDS_RESTART) { | |
1161 | /* disable receives */ | |
1162 | u32 rctl = er32(RCTL); | |
1163 | ew32(RCTL, rctl & ~E1000_RCTL_EN); | |
318a94d6 | 1164 | adapter->flags |= FLAG_RX_RESTART_NOW; |
bc7f75fa AK |
1165 | } |
1166 | /* guard against interrupt when we're going down */ | |
1167 | if (!test_bit(__E1000_DOWN, &adapter->state)) | |
1168 | mod_timer(&adapter->watchdog_timer, jiffies + 1); | |
1169 | } | |
1170 | ||
1171 | if (netif_rx_schedule_prep(netdev, &adapter->napi)) { | |
1172 | adapter->total_tx_bytes = 0; | |
1173 | adapter->total_tx_packets = 0; | |
1174 | adapter->total_rx_bytes = 0; | |
1175 | adapter->total_rx_packets = 0; | |
1176 | __netif_rx_schedule(netdev, &adapter->napi); | |
bc7f75fa AK |
1177 | } |
1178 | ||
1179 | return IRQ_HANDLED; | |
1180 | } | |
1181 | ||
1182 | /** | |
1183 | * e1000_intr - Interrupt Handler | |
1184 | * @irq: interrupt number | |
1185 | * @data: pointer to a network interface device structure | |
1186 | **/ | |
1187 | static irqreturn_t e1000_intr(int irq, void *data) | |
1188 | { | |
1189 | struct net_device *netdev = data; | |
1190 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
1191 | struct e1000_hw *hw = &adapter->hw; | |
bc7f75fa | 1192 | u32 rctl, icr = er32(ICR); |
4662e82b | 1193 | |
bc7f75fa AK |
1194 | if (!icr) |
1195 | return IRQ_NONE; /* Not our interrupt */ | |
1196 | ||
ad68076e BA |
1197 | /* |
1198 | * IMS will not auto-mask if INT_ASSERTED is not set, and if it is | |
1199 | * not set, then the adapter didn't send an interrupt | |
1200 | */ | |
bc7f75fa AK |
1201 | if (!(icr & E1000_ICR_INT_ASSERTED)) |
1202 | return IRQ_NONE; | |
1203 | ||
ad68076e BA |
1204 | /* |
1205 | * Interrupt Auto-Mask...upon reading ICR, | |
1206 | * interrupts are masked. No need for the | |
1207 | * IMC write | |
1208 | */ | |
bc7f75fa AK |
1209 | |
1210 | if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { | |
1211 | hw->mac.get_link_status = 1; | |
ad68076e BA |
1212 | /* |
1213 | * ICH8 workaround-- Call gig speed drop workaround on cable | |
1214 | * disconnect (LSC) before accessing any PHY registers | |
1215 | */ | |
bc7f75fa AK |
1216 | if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && |
1217 | (!(er32(STATUS) & E1000_STATUS_LU))) | |
a8f88ff5 | 1218 | schedule_work(&adapter->downshift_task); |
bc7f75fa | 1219 | |
ad68076e BA |
1220 | /* |
1221 | * 80003ES2LAN workaround-- | |
bc7f75fa AK |
1222 | * For packet buffer work-around on link down event; |
1223 | * disable receives here in the ISR and | |
1224 | * reset adapter in watchdog | |
1225 | */ | |
1226 | if (netif_carrier_ok(netdev) && | |
1227 | (adapter->flags & FLAG_RX_NEEDS_RESTART)) { | |
1228 | /* disable receives */ | |
1229 | rctl = er32(RCTL); | |
1230 | ew32(RCTL, rctl & ~E1000_RCTL_EN); | |
318a94d6 | 1231 | adapter->flags |= FLAG_RX_RESTART_NOW; |
bc7f75fa AK |
1232 | } |
1233 | /* guard against interrupt when we're going down */ | |
1234 | if (!test_bit(__E1000_DOWN, &adapter->state)) | |
1235 | mod_timer(&adapter->watchdog_timer, jiffies + 1); | |
1236 | } | |
1237 | ||
1238 | if (netif_rx_schedule_prep(netdev, &adapter->napi)) { | |
1239 | adapter->total_tx_bytes = 0; | |
1240 | adapter->total_tx_packets = 0; | |
1241 | adapter->total_rx_bytes = 0; | |
1242 | adapter->total_rx_packets = 0; | |
1243 | __netif_rx_schedule(netdev, &adapter->napi); | |
bc7f75fa AK |
1244 | } |
1245 | ||
1246 | return IRQ_HANDLED; | |
1247 | } | |
1248 | ||
4662e82b BA |
1249 | static irqreturn_t e1000_msix_other(int irq, void *data) |
1250 | { | |
1251 | struct net_device *netdev = data; | |
1252 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
1253 | struct e1000_hw *hw = &adapter->hw; | |
1254 | u32 icr = er32(ICR); | |
1255 | ||
1256 | if (!(icr & E1000_ICR_INT_ASSERTED)) { | |
1257 | ew32(IMS, E1000_IMS_OTHER); | |
1258 | return IRQ_NONE; | |
1259 | } | |
1260 | ||
1261 | if (icr & adapter->eiac_mask) | |
1262 | ew32(ICS, (icr & adapter->eiac_mask)); | |
1263 | ||
1264 | if (icr & E1000_ICR_OTHER) { | |
1265 | if (!(icr & E1000_ICR_LSC)) | |
1266 | goto no_link_interrupt; | |
1267 | hw->mac.get_link_status = 1; | |
1268 | /* guard against interrupt when we're going down */ | |
1269 | if (!test_bit(__E1000_DOWN, &adapter->state)) | |
1270 | mod_timer(&adapter->watchdog_timer, jiffies + 1); | |
1271 | } | |
1272 | ||
1273 | no_link_interrupt: | |
1274 | ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER); | |
1275 | ||
1276 | return IRQ_HANDLED; | |
1277 | } | |
1278 | ||
1279 | ||
1280 | static irqreturn_t e1000_intr_msix_tx(int irq, void *data) | |
1281 | { | |
1282 | struct net_device *netdev = data; | |
1283 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
1284 | struct e1000_hw *hw = &adapter->hw; | |
1285 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
1286 | ||
1287 | ||
1288 | adapter->total_tx_bytes = 0; | |
1289 | adapter->total_tx_packets = 0; | |
1290 | ||
1291 | if (!e1000_clean_tx_irq(adapter)) | |
1292 | /* Ring was not completely cleaned, so fire another interrupt */ | |
1293 | ew32(ICS, tx_ring->ims_val); | |
1294 | ||
1295 | return IRQ_HANDLED; | |
1296 | } | |
1297 | ||
1298 | static irqreturn_t e1000_intr_msix_rx(int irq, void *data) | |
1299 | { | |
1300 | struct net_device *netdev = data; | |
1301 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
1302 | ||
1303 | /* Write the ITR value calculated at the end of the | |
1304 | * previous interrupt. | |
1305 | */ | |
1306 | if (adapter->rx_ring->set_itr) { | |
1307 | writel(1000000000 / (adapter->rx_ring->itr_val * 256), | |
1308 | adapter->hw.hw_addr + adapter->rx_ring->itr_register); | |
1309 | adapter->rx_ring->set_itr = 0; | |
1310 | } | |
1311 | ||
1312 | if (netif_rx_schedule_prep(netdev, &adapter->napi)) { | |
1313 | adapter->total_rx_bytes = 0; | |
1314 | adapter->total_rx_packets = 0; | |
1315 | __netif_rx_schedule(netdev, &adapter->napi); | |
1316 | } | |
1317 | return IRQ_HANDLED; | |
1318 | } | |
1319 | ||
1320 | /** | |
1321 | * e1000_configure_msix - Configure MSI-X hardware | |
1322 | * | |
1323 | * e1000_configure_msix sets up the hardware to properly | |
1324 | * generate MSI-X interrupts. | |
1325 | **/ | |
1326 | static void e1000_configure_msix(struct e1000_adapter *adapter) | |
1327 | { | |
1328 | struct e1000_hw *hw = &adapter->hw; | |
1329 | struct e1000_ring *rx_ring = adapter->rx_ring; | |
1330 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
1331 | int vector = 0; | |
1332 | u32 ctrl_ext, ivar = 0; | |
1333 | ||
1334 | adapter->eiac_mask = 0; | |
1335 | ||
1336 | /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */ | |
1337 | if (hw->mac.type == e1000_82574) { | |
1338 | u32 rfctl = er32(RFCTL); | |
1339 | rfctl |= E1000_RFCTL_ACK_DIS; | |
1340 | ew32(RFCTL, rfctl); | |
1341 | } | |
1342 | ||
1343 | #define E1000_IVAR_INT_ALLOC_VALID 0x8 | |
1344 | /* Configure Rx vector */ | |
1345 | rx_ring->ims_val = E1000_IMS_RXQ0; | |
1346 | adapter->eiac_mask |= rx_ring->ims_val; | |
1347 | if (rx_ring->itr_val) | |
1348 | writel(1000000000 / (rx_ring->itr_val * 256), | |
1349 | hw->hw_addr + rx_ring->itr_register); | |
1350 | else | |
1351 | writel(1, hw->hw_addr + rx_ring->itr_register); | |
1352 | ivar = E1000_IVAR_INT_ALLOC_VALID | vector; | |
1353 | ||
1354 | /* Configure Tx vector */ | |
1355 | tx_ring->ims_val = E1000_IMS_TXQ0; | |
1356 | vector++; | |
1357 | if (tx_ring->itr_val) | |
1358 | writel(1000000000 / (tx_ring->itr_val * 256), | |
1359 | hw->hw_addr + tx_ring->itr_register); | |
1360 | else | |
1361 | writel(1, hw->hw_addr + tx_ring->itr_register); | |
1362 | adapter->eiac_mask |= tx_ring->ims_val; | |
1363 | ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8); | |
1364 | ||
1365 | /* set vector for Other Causes, e.g. link changes */ | |
1366 | vector++; | |
1367 | ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16); | |
1368 | if (rx_ring->itr_val) | |
1369 | writel(1000000000 / (rx_ring->itr_val * 256), | |
1370 | hw->hw_addr + E1000_EITR_82574(vector)); | |
1371 | else | |
1372 | writel(1, hw->hw_addr + E1000_EITR_82574(vector)); | |
1373 | ||
1374 | /* Cause Tx interrupts on every write back */ | |
1375 | ivar |= (1 << 31); | |
1376 | ||
1377 | ew32(IVAR, ivar); | |
1378 | ||
1379 | /* enable MSI-X PBA support */ | |
1380 | ctrl_ext = er32(CTRL_EXT); | |
1381 | ctrl_ext |= E1000_CTRL_EXT_PBA_CLR; | |
1382 | ||
1383 | /* Auto-Mask Other interrupts upon ICR read */ | |
1384 | #define E1000_EIAC_MASK_82574 0x01F00000 | |
1385 | ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER); | |
1386 | ctrl_ext |= E1000_CTRL_EXT_EIAME; | |
1387 | ew32(CTRL_EXT, ctrl_ext); | |
1388 | e1e_flush(); | |
1389 | } | |
1390 | ||
1391 | void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter) | |
1392 | { | |
1393 | if (adapter->msix_entries) { | |
1394 | pci_disable_msix(adapter->pdev); | |
1395 | kfree(adapter->msix_entries); | |
1396 | adapter->msix_entries = NULL; | |
1397 | } else if (adapter->flags & FLAG_MSI_ENABLED) { | |
1398 | pci_disable_msi(adapter->pdev); | |
1399 | adapter->flags &= ~FLAG_MSI_ENABLED; | |
1400 | } | |
1401 | ||
1402 | return; | |
1403 | } | |
1404 | ||
1405 | /** | |
1406 | * e1000e_set_interrupt_capability - set MSI or MSI-X if supported | |
1407 | * | |
1408 | * Attempt to configure interrupts using the best available | |
1409 | * capabilities of the hardware and kernel. | |
1410 | **/ | |
1411 | void e1000e_set_interrupt_capability(struct e1000_adapter *adapter) | |
1412 | { | |
1413 | int err; | |
1414 | int numvecs, i; | |
1415 | ||
1416 | ||
1417 | switch (adapter->int_mode) { | |
1418 | case E1000E_INT_MODE_MSIX: | |
1419 | if (adapter->flags & FLAG_HAS_MSIX) { | |
1420 | numvecs = 3; /* RxQ0, TxQ0 and other */ | |
1421 | adapter->msix_entries = kcalloc(numvecs, | |
1422 | sizeof(struct msix_entry), | |
1423 | GFP_KERNEL); | |
1424 | if (adapter->msix_entries) { | |
1425 | for (i = 0; i < numvecs; i++) | |
1426 | adapter->msix_entries[i].entry = i; | |
1427 | ||
1428 | err = pci_enable_msix(adapter->pdev, | |
1429 | adapter->msix_entries, | |
1430 | numvecs); | |
1431 | if (err == 0) | |
1432 | return; | |
1433 | } | |
1434 | /* MSI-X failed, so fall through and try MSI */ | |
1435 | e_err("Failed to initialize MSI-X interrupts. " | |
1436 | "Falling back to MSI interrupts.\n"); | |
1437 | e1000e_reset_interrupt_capability(adapter); | |
1438 | } | |
1439 | adapter->int_mode = E1000E_INT_MODE_MSI; | |
1440 | /* Fall through */ | |
1441 | case E1000E_INT_MODE_MSI: | |
1442 | if (!pci_enable_msi(adapter->pdev)) { | |
1443 | adapter->flags |= FLAG_MSI_ENABLED; | |
1444 | } else { | |
1445 | adapter->int_mode = E1000E_INT_MODE_LEGACY; | |
1446 | e_err("Failed to initialize MSI interrupts. Falling " | |
1447 | "back to legacy interrupts.\n"); | |
1448 | } | |
1449 | /* Fall through */ | |
1450 | case E1000E_INT_MODE_LEGACY: | |
1451 | /* Don't do anything; this is the system default */ | |
1452 | break; | |
1453 | } | |
1454 | ||
1455 | return; | |
1456 | } | |
1457 | ||
1458 | /** | |
1459 | * e1000_request_msix - Initialize MSI-X interrupts | |
1460 | * | |
1461 | * e1000_request_msix allocates MSI-X vectors and requests interrupts from the | |
1462 | * kernel. | |
1463 | **/ | |
1464 | static int e1000_request_msix(struct e1000_adapter *adapter) | |
1465 | { | |
1466 | struct net_device *netdev = adapter->netdev; | |
1467 | int err = 0, vector = 0; | |
1468 | ||
1469 | if (strlen(netdev->name) < (IFNAMSIZ - 5)) | |
1470 | sprintf(adapter->rx_ring->name, "%s-rx0", netdev->name); | |
1471 | else | |
1472 | memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ); | |
1473 | err = request_irq(adapter->msix_entries[vector].vector, | |
1474 | &e1000_intr_msix_rx, 0, adapter->rx_ring->name, | |
1475 | netdev); | |
1476 | if (err) | |
1477 | goto out; | |
1478 | adapter->rx_ring->itr_register = E1000_EITR_82574(vector); | |
1479 | adapter->rx_ring->itr_val = adapter->itr; | |
1480 | vector++; | |
1481 | ||
1482 | if (strlen(netdev->name) < (IFNAMSIZ - 5)) | |
1483 | sprintf(adapter->tx_ring->name, "%s-tx0", netdev->name); | |
1484 | else | |
1485 | memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ); | |
1486 | err = request_irq(adapter->msix_entries[vector].vector, | |
1487 | &e1000_intr_msix_tx, 0, adapter->tx_ring->name, | |
1488 | netdev); | |
1489 | if (err) | |
1490 | goto out; | |
1491 | adapter->tx_ring->itr_register = E1000_EITR_82574(vector); | |
1492 | adapter->tx_ring->itr_val = adapter->itr; | |
1493 | vector++; | |
1494 | ||
1495 | err = request_irq(adapter->msix_entries[vector].vector, | |
1496 | &e1000_msix_other, 0, netdev->name, netdev); | |
1497 | if (err) | |
1498 | goto out; | |
1499 | ||
1500 | e1000_configure_msix(adapter); | |
1501 | return 0; | |
1502 | out: | |
1503 | return err; | |
1504 | } | |
1505 | ||
f8d59f78 BA |
1506 | /** |
1507 | * e1000_request_irq - initialize interrupts | |
1508 | * | |
1509 | * Attempts to configure interrupts using the best available | |
1510 | * capabilities of the hardware and kernel. | |
1511 | **/ | |
bc7f75fa AK |
1512 | static int e1000_request_irq(struct e1000_adapter *adapter) |
1513 | { | |
1514 | struct net_device *netdev = adapter->netdev; | |
bc7f75fa AK |
1515 | int err; |
1516 | ||
4662e82b BA |
1517 | if (adapter->msix_entries) { |
1518 | err = e1000_request_msix(adapter); | |
1519 | if (!err) | |
1520 | return err; | |
1521 | /* fall back to MSI */ | |
1522 | e1000e_reset_interrupt_capability(adapter); | |
1523 | adapter->int_mode = E1000E_INT_MODE_MSI; | |
1524 | e1000e_set_interrupt_capability(adapter); | |
bc7f75fa | 1525 | } |
4662e82b BA |
1526 | if (adapter->flags & FLAG_MSI_ENABLED) { |
1527 | err = request_irq(adapter->pdev->irq, &e1000_intr_msi, 0, | |
1528 | netdev->name, netdev); | |
1529 | if (!err) | |
1530 | return err; | |
bc7f75fa | 1531 | |
4662e82b BA |
1532 | /* fall back to legacy interrupt */ |
1533 | e1000e_reset_interrupt_capability(adapter); | |
1534 | adapter->int_mode = E1000E_INT_MODE_LEGACY; | |
bc7f75fa AK |
1535 | } |
1536 | ||
4662e82b BA |
1537 | err = request_irq(adapter->pdev->irq, &e1000_intr, IRQF_SHARED, |
1538 | netdev->name, netdev); | |
1539 | if (err) | |
1540 | e_err("Unable to allocate interrupt, Error: %d\n", err); | |
1541 | ||
bc7f75fa AK |
1542 | return err; |
1543 | } | |
1544 | ||
1545 | static void e1000_free_irq(struct e1000_adapter *adapter) | |
1546 | { | |
1547 | struct net_device *netdev = adapter->netdev; | |
1548 | ||
4662e82b BA |
1549 | if (adapter->msix_entries) { |
1550 | int vector = 0; | |
1551 | ||
1552 | free_irq(adapter->msix_entries[vector].vector, netdev); | |
1553 | vector++; | |
1554 | ||
1555 | free_irq(adapter->msix_entries[vector].vector, netdev); | |
1556 | vector++; | |
1557 | ||
1558 | /* Other Causes interrupt vector */ | |
1559 | free_irq(adapter->msix_entries[vector].vector, netdev); | |
1560 | return; | |
bc7f75fa | 1561 | } |
4662e82b BA |
1562 | |
1563 | free_irq(adapter->pdev->irq, netdev); | |
bc7f75fa AK |
1564 | } |
1565 | ||
1566 | /** | |
1567 | * e1000_irq_disable - Mask off interrupt generation on the NIC | |
1568 | **/ | |
1569 | static void e1000_irq_disable(struct e1000_adapter *adapter) | |
1570 | { | |
1571 | struct e1000_hw *hw = &adapter->hw; | |
1572 | ||
bc7f75fa | 1573 | ew32(IMC, ~0); |
4662e82b BA |
1574 | if (adapter->msix_entries) |
1575 | ew32(EIAC_82574, 0); | |
bc7f75fa AK |
1576 | e1e_flush(); |
1577 | synchronize_irq(adapter->pdev->irq); | |
1578 | } | |
1579 | ||
1580 | /** | |
1581 | * e1000_irq_enable - Enable default interrupt generation settings | |
1582 | **/ | |
1583 | static void e1000_irq_enable(struct e1000_adapter *adapter) | |
1584 | { | |
1585 | struct e1000_hw *hw = &adapter->hw; | |
1586 | ||
4662e82b BA |
1587 | if (adapter->msix_entries) { |
1588 | ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); | |
1589 | ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); | |
1590 | } else { | |
1591 | ew32(IMS, IMS_ENABLE_MASK); | |
1592 | } | |
74ef9c39 | 1593 | e1e_flush(); |
bc7f75fa AK |
1594 | } |
1595 | ||
1596 | /** | |
1597 | * e1000_get_hw_control - get control of the h/w from f/w | |
1598 | * @adapter: address of board private structure | |
1599 | * | |
489815ce | 1600 | * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit. |
bc7f75fa AK |
1601 | * For ASF and Pass Through versions of f/w this means that |
1602 | * the driver is loaded. For AMT version (only with 82573) | |
1603 | * of the f/w this means that the network i/f is open. | |
1604 | **/ | |
1605 | static void e1000_get_hw_control(struct e1000_adapter *adapter) | |
1606 | { | |
1607 | struct e1000_hw *hw = &adapter->hw; | |
1608 | u32 ctrl_ext; | |
1609 | u32 swsm; | |
1610 | ||
1611 | /* Let firmware know the driver has taken over */ | |
1612 | if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) { | |
1613 | swsm = er32(SWSM); | |
1614 | ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD); | |
1615 | } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { | |
1616 | ctrl_ext = er32(CTRL_EXT); | |
ad68076e | 1617 | ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); |
bc7f75fa AK |
1618 | } |
1619 | } | |
1620 | ||
1621 | /** | |
1622 | * e1000_release_hw_control - release control of the h/w to f/w | |
1623 | * @adapter: address of board private structure | |
1624 | * | |
489815ce | 1625 | * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit. |
bc7f75fa AK |
1626 | * For ASF and Pass Through versions of f/w this means that the |
1627 | * driver is no longer loaded. For AMT version (only with 82573) i | |
1628 | * of the f/w this means that the network i/f is closed. | |
1629 | * | |
1630 | **/ | |
1631 | static void e1000_release_hw_control(struct e1000_adapter *adapter) | |
1632 | { | |
1633 | struct e1000_hw *hw = &adapter->hw; | |
1634 | u32 ctrl_ext; | |
1635 | u32 swsm; | |
1636 | ||
1637 | /* Let firmware taken over control of h/w */ | |
1638 | if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) { | |
1639 | swsm = er32(SWSM); | |
1640 | ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD); | |
1641 | } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { | |
1642 | ctrl_ext = er32(CTRL_EXT); | |
ad68076e | 1643 | ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); |
bc7f75fa AK |
1644 | } |
1645 | } | |
1646 | ||
bc7f75fa AK |
1647 | /** |
1648 | * @e1000_alloc_ring - allocate memory for a ring structure | |
1649 | **/ | |
1650 | static int e1000_alloc_ring_dma(struct e1000_adapter *adapter, | |
1651 | struct e1000_ring *ring) | |
1652 | { | |
1653 | struct pci_dev *pdev = adapter->pdev; | |
1654 | ||
1655 | ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma, | |
1656 | GFP_KERNEL); | |
1657 | if (!ring->desc) | |
1658 | return -ENOMEM; | |
1659 | ||
1660 | return 0; | |
1661 | } | |
1662 | ||
1663 | /** | |
1664 | * e1000e_setup_tx_resources - allocate Tx resources (Descriptors) | |
1665 | * @adapter: board private structure | |
1666 | * | |
1667 | * Return 0 on success, negative on failure | |
1668 | **/ | |
1669 | int e1000e_setup_tx_resources(struct e1000_adapter *adapter) | |
1670 | { | |
1671 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
1672 | int err = -ENOMEM, size; | |
1673 | ||
1674 | size = sizeof(struct e1000_buffer) * tx_ring->count; | |
1675 | tx_ring->buffer_info = vmalloc(size); | |
1676 | if (!tx_ring->buffer_info) | |
1677 | goto err; | |
1678 | memset(tx_ring->buffer_info, 0, size); | |
1679 | ||
1680 | /* round up to nearest 4K */ | |
1681 | tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc); | |
1682 | tx_ring->size = ALIGN(tx_ring->size, 4096); | |
1683 | ||
1684 | err = e1000_alloc_ring_dma(adapter, tx_ring); | |
1685 | if (err) | |
1686 | goto err; | |
1687 | ||
1688 | tx_ring->next_to_use = 0; | |
1689 | tx_ring->next_to_clean = 0; | |
1690 | spin_lock_init(&adapter->tx_queue_lock); | |
1691 | ||
1692 | return 0; | |
1693 | err: | |
1694 | vfree(tx_ring->buffer_info); | |
44defeb3 | 1695 | e_err("Unable to allocate memory for the transmit descriptor ring\n"); |
bc7f75fa AK |
1696 | return err; |
1697 | } | |
1698 | ||
1699 | /** | |
1700 | * e1000e_setup_rx_resources - allocate Rx resources (Descriptors) | |
1701 | * @adapter: board private structure | |
1702 | * | |
1703 | * Returns 0 on success, negative on failure | |
1704 | **/ | |
1705 | int e1000e_setup_rx_resources(struct e1000_adapter *adapter) | |
1706 | { | |
1707 | struct e1000_ring *rx_ring = adapter->rx_ring; | |
47f44e40 AK |
1708 | struct e1000_buffer *buffer_info; |
1709 | int i, size, desc_len, err = -ENOMEM; | |
bc7f75fa AK |
1710 | |
1711 | size = sizeof(struct e1000_buffer) * rx_ring->count; | |
1712 | rx_ring->buffer_info = vmalloc(size); | |
1713 | if (!rx_ring->buffer_info) | |
1714 | goto err; | |
1715 | memset(rx_ring->buffer_info, 0, size); | |
1716 | ||
47f44e40 AK |
1717 | for (i = 0; i < rx_ring->count; i++) { |
1718 | buffer_info = &rx_ring->buffer_info[i]; | |
1719 | buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS, | |
1720 | sizeof(struct e1000_ps_page), | |
1721 | GFP_KERNEL); | |
1722 | if (!buffer_info->ps_pages) | |
1723 | goto err_pages; | |
1724 | } | |
bc7f75fa AK |
1725 | |
1726 | desc_len = sizeof(union e1000_rx_desc_packet_split); | |
1727 | ||
1728 | /* Round up to nearest 4K */ | |
1729 | rx_ring->size = rx_ring->count * desc_len; | |
1730 | rx_ring->size = ALIGN(rx_ring->size, 4096); | |
1731 | ||
1732 | err = e1000_alloc_ring_dma(adapter, rx_ring); | |
1733 | if (err) | |
47f44e40 | 1734 | goto err_pages; |
bc7f75fa AK |
1735 | |
1736 | rx_ring->next_to_clean = 0; | |
1737 | rx_ring->next_to_use = 0; | |
1738 | rx_ring->rx_skb_top = NULL; | |
1739 | ||
1740 | return 0; | |
47f44e40 AK |
1741 | |
1742 | err_pages: | |
1743 | for (i = 0; i < rx_ring->count; i++) { | |
1744 | buffer_info = &rx_ring->buffer_info[i]; | |
1745 | kfree(buffer_info->ps_pages); | |
1746 | } | |
bc7f75fa AK |
1747 | err: |
1748 | vfree(rx_ring->buffer_info); | |
44defeb3 | 1749 | e_err("Unable to allocate memory for the transmit descriptor ring\n"); |
bc7f75fa AK |
1750 | return err; |
1751 | } | |
1752 | ||
1753 | /** | |
1754 | * e1000_clean_tx_ring - Free Tx Buffers | |
1755 | * @adapter: board private structure | |
1756 | **/ | |
1757 | static void e1000_clean_tx_ring(struct e1000_adapter *adapter) | |
1758 | { | |
1759 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
1760 | struct e1000_buffer *buffer_info; | |
1761 | unsigned long size; | |
1762 | unsigned int i; | |
1763 | ||
1764 | for (i = 0; i < tx_ring->count; i++) { | |
1765 | buffer_info = &tx_ring->buffer_info[i]; | |
1766 | e1000_put_txbuf(adapter, buffer_info); | |
1767 | } | |
1768 | ||
1769 | size = sizeof(struct e1000_buffer) * tx_ring->count; | |
1770 | memset(tx_ring->buffer_info, 0, size); | |
1771 | ||
1772 | memset(tx_ring->desc, 0, tx_ring->size); | |
1773 | ||
1774 | tx_ring->next_to_use = 0; | |
1775 | tx_ring->next_to_clean = 0; | |
1776 | ||
1777 | writel(0, adapter->hw.hw_addr + tx_ring->head); | |
1778 | writel(0, adapter->hw.hw_addr + tx_ring->tail); | |
1779 | } | |
1780 | ||
1781 | /** | |
1782 | * e1000e_free_tx_resources - Free Tx Resources per Queue | |
1783 | * @adapter: board private structure | |
1784 | * | |
1785 | * Free all transmit software resources | |
1786 | **/ | |
1787 | void e1000e_free_tx_resources(struct e1000_adapter *adapter) | |
1788 | { | |
1789 | struct pci_dev *pdev = adapter->pdev; | |
1790 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
1791 | ||
1792 | e1000_clean_tx_ring(adapter); | |
1793 | ||
1794 | vfree(tx_ring->buffer_info); | |
1795 | tx_ring->buffer_info = NULL; | |
1796 | ||
1797 | dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc, | |
1798 | tx_ring->dma); | |
1799 | tx_ring->desc = NULL; | |
1800 | } | |
1801 | ||
1802 | /** | |
1803 | * e1000e_free_rx_resources - Free Rx Resources | |
1804 | * @adapter: board private structure | |
1805 | * | |
1806 | * Free all receive software resources | |
1807 | **/ | |
1808 | ||
1809 | void e1000e_free_rx_resources(struct e1000_adapter *adapter) | |
1810 | { | |
1811 | struct pci_dev *pdev = adapter->pdev; | |
1812 | struct e1000_ring *rx_ring = adapter->rx_ring; | |
47f44e40 | 1813 | int i; |
bc7f75fa AK |
1814 | |
1815 | e1000_clean_rx_ring(adapter); | |
1816 | ||
47f44e40 AK |
1817 | for (i = 0; i < rx_ring->count; i++) { |
1818 | kfree(rx_ring->buffer_info[i].ps_pages); | |
1819 | } | |
1820 | ||
bc7f75fa AK |
1821 | vfree(rx_ring->buffer_info); |
1822 | rx_ring->buffer_info = NULL; | |
1823 | ||
bc7f75fa AK |
1824 | dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, |
1825 | rx_ring->dma); | |
1826 | rx_ring->desc = NULL; | |
1827 | } | |
1828 | ||
1829 | /** | |
1830 | * e1000_update_itr - update the dynamic ITR value based on statistics | |
489815ce AK |
1831 | * @adapter: pointer to adapter |
1832 | * @itr_setting: current adapter->itr | |
1833 | * @packets: the number of packets during this measurement interval | |
1834 | * @bytes: the number of bytes during this measurement interval | |
1835 | * | |
bc7f75fa AK |
1836 | * Stores a new ITR value based on packets and byte |
1837 | * counts during the last interrupt. The advantage of per interrupt | |
1838 | * computation is faster updates and more accurate ITR for the current | |
1839 | * traffic pattern. Constants in this function were computed | |
1840 | * based on theoretical maximum wire speed and thresholds were set based | |
1841 | * on testing data as well as attempting to minimize response time | |
4662e82b BA |
1842 | * while increasing bulk throughput. This functionality is controlled |
1843 | * by the InterruptThrottleRate module parameter. | |
bc7f75fa AK |
1844 | **/ |
1845 | static unsigned int e1000_update_itr(struct e1000_adapter *adapter, | |
1846 | u16 itr_setting, int packets, | |
1847 | int bytes) | |
1848 | { | |
1849 | unsigned int retval = itr_setting; | |
1850 | ||
1851 | if (packets == 0) | |
1852 | goto update_itr_done; | |
1853 | ||
1854 | switch (itr_setting) { | |
1855 | case lowest_latency: | |
1856 | /* handle TSO and jumbo frames */ | |
1857 | if (bytes/packets > 8000) | |
1858 | retval = bulk_latency; | |
1859 | else if ((packets < 5) && (bytes > 512)) { | |
1860 | retval = low_latency; | |
1861 | } | |
1862 | break; | |
1863 | case low_latency: /* 50 usec aka 20000 ints/s */ | |
1864 | if (bytes > 10000) { | |
1865 | /* this if handles the TSO accounting */ | |
1866 | if (bytes/packets > 8000) { | |
1867 | retval = bulk_latency; | |
1868 | } else if ((packets < 10) || ((bytes/packets) > 1200)) { | |
1869 | retval = bulk_latency; | |
1870 | } else if ((packets > 35)) { | |
1871 | retval = lowest_latency; | |
1872 | } | |
1873 | } else if (bytes/packets > 2000) { | |
1874 | retval = bulk_latency; | |
1875 | } else if (packets <= 2 && bytes < 512) { | |
1876 | retval = lowest_latency; | |
1877 | } | |
1878 | break; | |
1879 | case bulk_latency: /* 250 usec aka 4000 ints/s */ | |
1880 | if (bytes > 25000) { | |
1881 | if (packets > 35) { | |
1882 | retval = low_latency; | |
1883 | } | |
1884 | } else if (bytes < 6000) { | |
1885 | retval = low_latency; | |
1886 | } | |
1887 | break; | |
1888 | } | |
1889 | ||
1890 | update_itr_done: | |
1891 | return retval; | |
1892 | } | |
1893 | ||
1894 | static void e1000_set_itr(struct e1000_adapter *adapter) | |
1895 | { | |
1896 | struct e1000_hw *hw = &adapter->hw; | |
1897 | u16 current_itr; | |
1898 | u32 new_itr = adapter->itr; | |
1899 | ||
1900 | /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ | |
1901 | if (adapter->link_speed != SPEED_1000) { | |
1902 | current_itr = 0; | |
1903 | new_itr = 4000; | |
1904 | goto set_itr_now; | |
1905 | } | |
1906 | ||
1907 | adapter->tx_itr = e1000_update_itr(adapter, | |
1908 | adapter->tx_itr, | |
1909 | adapter->total_tx_packets, | |
1910 | adapter->total_tx_bytes); | |
1911 | /* conservative mode (itr 3) eliminates the lowest_latency setting */ | |
1912 | if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) | |
1913 | adapter->tx_itr = low_latency; | |
1914 | ||
1915 | adapter->rx_itr = e1000_update_itr(adapter, | |
1916 | adapter->rx_itr, | |
1917 | adapter->total_rx_packets, | |
1918 | adapter->total_rx_bytes); | |
1919 | /* conservative mode (itr 3) eliminates the lowest_latency setting */ | |
1920 | if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) | |
1921 | adapter->rx_itr = low_latency; | |
1922 | ||
1923 | current_itr = max(adapter->rx_itr, adapter->tx_itr); | |
1924 | ||
1925 | switch (current_itr) { | |
1926 | /* counts and packets in update_itr are dependent on these numbers */ | |
1927 | case lowest_latency: | |
1928 | new_itr = 70000; | |
1929 | break; | |
1930 | case low_latency: | |
1931 | new_itr = 20000; /* aka hwitr = ~200 */ | |
1932 | break; | |
1933 | case bulk_latency: | |
1934 | new_itr = 4000; | |
1935 | break; | |
1936 | default: | |
1937 | break; | |
1938 | } | |
1939 | ||
1940 | set_itr_now: | |
1941 | if (new_itr != adapter->itr) { | |
ad68076e BA |
1942 | /* |
1943 | * this attempts to bias the interrupt rate towards Bulk | |
bc7f75fa | 1944 | * by adding intermediate steps when interrupt rate is |
ad68076e BA |
1945 | * increasing |
1946 | */ | |
bc7f75fa AK |
1947 | new_itr = new_itr > adapter->itr ? |
1948 | min(adapter->itr + (new_itr >> 2), new_itr) : | |
1949 | new_itr; | |
1950 | adapter->itr = new_itr; | |
4662e82b BA |
1951 | adapter->rx_ring->itr_val = new_itr; |
1952 | if (adapter->msix_entries) | |
1953 | adapter->rx_ring->set_itr = 1; | |
1954 | else | |
1955 | ew32(ITR, 1000000000 / (new_itr * 256)); | |
bc7f75fa AK |
1956 | } |
1957 | } | |
1958 | ||
4662e82b BA |
1959 | /** |
1960 | * e1000_alloc_queues - Allocate memory for all rings | |
1961 | * @adapter: board private structure to initialize | |
1962 | **/ | |
1963 | static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter) | |
1964 | { | |
1965 | adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); | |
1966 | if (!adapter->tx_ring) | |
1967 | goto err; | |
1968 | ||
1969 | adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); | |
1970 | if (!adapter->rx_ring) | |
1971 | goto err; | |
1972 | ||
1973 | return 0; | |
1974 | err: | |
1975 | e_err("Unable to allocate memory for queues\n"); | |
1976 | kfree(adapter->rx_ring); | |
1977 | kfree(adapter->tx_ring); | |
1978 | return -ENOMEM; | |
1979 | } | |
1980 | ||
bc7f75fa AK |
1981 | /** |
1982 | * e1000_clean - NAPI Rx polling callback | |
ad68076e | 1983 | * @napi: struct associated with this polling callback |
489815ce | 1984 | * @budget: amount of packets driver is allowed to process this poll |
bc7f75fa AK |
1985 | **/ |
1986 | static int e1000_clean(struct napi_struct *napi, int budget) | |
1987 | { | |
1988 | struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi); | |
4662e82b | 1989 | struct e1000_hw *hw = &adapter->hw; |
bc7f75fa | 1990 | struct net_device *poll_dev = adapter->netdev; |
d2c7ddd6 | 1991 | int tx_cleaned = 0, work_done = 0; |
bc7f75fa AK |
1992 | |
1993 | /* Must NOT use netdev_priv macro here. */ | |
1994 | adapter = poll_dev->priv; | |
1995 | ||
4662e82b BA |
1996 | if (adapter->msix_entries && |
1997 | !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val)) | |
1998 | goto clean_rx; | |
1999 | ||
ad68076e BA |
2000 | /* |
2001 | * e1000_clean is called per-cpu. This lock protects | |
bc7f75fa AK |
2002 | * tx_ring from being cleaned by multiple cpus |
2003 | * simultaneously. A failure obtaining the lock means | |
ad68076e BA |
2004 | * tx_ring is currently being cleaned anyway. |
2005 | */ | |
bc7f75fa | 2006 | if (spin_trylock(&adapter->tx_queue_lock)) { |
d2c7ddd6 | 2007 | tx_cleaned = e1000_clean_tx_irq(adapter); |
bc7f75fa AK |
2008 | spin_unlock(&adapter->tx_queue_lock); |
2009 | } | |
2010 | ||
4662e82b | 2011 | clean_rx: |
bc7f75fa | 2012 | adapter->clean_rx(adapter, &work_done, budget); |
d2c7ddd6 DM |
2013 | |
2014 | if (tx_cleaned) | |
2015 | work_done = budget; | |
bc7f75fa | 2016 | |
53e52c72 DM |
2017 | /* If budget not fully consumed, exit the polling mode */ |
2018 | if (work_done < budget) { | |
bc7f75fa AK |
2019 | if (adapter->itr_setting & 3) |
2020 | e1000_set_itr(adapter); | |
2021 | netif_rx_complete(poll_dev, napi); | |
4662e82b BA |
2022 | if (adapter->msix_entries) |
2023 | ew32(IMS, adapter->rx_ring->ims_val); | |
2024 | else | |
2025 | e1000_irq_enable(adapter); | |
bc7f75fa AK |
2026 | } |
2027 | ||
2028 | return work_done; | |
2029 | } | |
2030 | ||
2031 | static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid) | |
2032 | { | |
2033 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
2034 | struct e1000_hw *hw = &adapter->hw; | |
2035 | u32 vfta, index; | |
2036 | ||
2037 | /* don't update vlan cookie if already programmed */ | |
2038 | if ((adapter->hw.mng_cookie.status & | |
2039 | E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && | |
2040 | (vid == adapter->mng_vlan_id)) | |
2041 | return; | |
2042 | /* add VID to filter table */ | |
2043 | index = (vid >> 5) & 0x7F; | |
2044 | vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); | |
2045 | vfta |= (1 << (vid & 0x1F)); | |
2046 | e1000e_write_vfta(hw, index, vfta); | |
2047 | } | |
2048 | ||
2049 | static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) | |
2050 | { | |
2051 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
2052 | struct e1000_hw *hw = &adapter->hw; | |
2053 | u32 vfta, index; | |
2054 | ||
74ef9c39 JB |
2055 | if (!test_bit(__E1000_DOWN, &adapter->state)) |
2056 | e1000_irq_disable(adapter); | |
bc7f75fa | 2057 | vlan_group_set_device(adapter->vlgrp, vid, NULL); |
74ef9c39 JB |
2058 | |
2059 | if (!test_bit(__E1000_DOWN, &adapter->state)) | |
2060 | e1000_irq_enable(adapter); | |
bc7f75fa AK |
2061 | |
2062 | if ((adapter->hw.mng_cookie.status & | |
2063 | E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && | |
2064 | (vid == adapter->mng_vlan_id)) { | |
2065 | /* release control to f/w */ | |
2066 | e1000_release_hw_control(adapter); | |
2067 | return; | |
2068 | } | |
2069 | ||
2070 | /* remove VID from filter table */ | |
2071 | index = (vid >> 5) & 0x7F; | |
2072 | vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); | |
2073 | vfta &= ~(1 << (vid & 0x1F)); | |
2074 | e1000e_write_vfta(hw, index, vfta); | |
2075 | } | |
2076 | ||
2077 | static void e1000_update_mng_vlan(struct e1000_adapter *adapter) | |
2078 | { | |
2079 | struct net_device *netdev = adapter->netdev; | |
2080 | u16 vid = adapter->hw.mng_cookie.vlan_id; | |
2081 | u16 old_vid = adapter->mng_vlan_id; | |
2082 | ||
2083 | if (!adapter->vlgrp) | |
2084 | return; | |
2085 | ||
2086 | if (!vlan_group_get_device(adapter->vlgrp, vid)) { | |
2087 | adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; | |
2088 | if (adapter->hw.mng_cookie.status & | |
2089 | E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { | |
2090 | e1000_vlan_rx_add_vid(netdev, vid); | |
2091 | adapter->mng_vlan_id = vid; | |
2092 | } | |
2093 | ||
2094 | if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && | |
2095 | (vid != old_vid) && | |
2096 | !vlan_group_get_device(adapter->vlgrp, old_vid)) | |
2097 | e1000_vlan_rx_kill_vid(netdev, old_vid); | |
2098 | } else { | |
2099 | adapter->mng_vlan_id = vid; | |
2100 | } | |
2101 | } | |
2102 | ||
2103 | ||
2104 | static void e1000_vlan_rx_register(struct net_device *netdev, | |
2105 | struct vlan_group *grp) | |
2106 | { | |
2107 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
2108 | struct e1000_hw *hw = &adapter->hw; | |
2109 | u32 ctrl, rctl; | |
2110 | ||
74ef9c39 JB |
2111 | if (!test_bit(__E1000_DOWN, &adapter->state)) |
2112 | e1000_irq_disable(adapter); | |
bc7f75fa AK |
2113 | adapter->vlgrp = grp; |
2114 | ||
2115 | if (grp) { | |
2116 | /* enable VLAN tag insert/strip */ | |
2117 | ctrl = er32(CTRL); | |
2118 | ctrl |= E1000_CTRL_VME; | |
2119 | ew32(CTRL, ctrl); | |
2120 | ||
2121 | if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { | |
2122 | /* enable VLAN receive filtering */ | |
2123 | rctl = er32(RCTL); | |
bc7f75fa AK |
2124 | rctl &= ~E1000_RCTL_CFIEN; |
2125 | ew32(RCTL, rctl); | |
2126 | e1000_update_mng_vlan(adapter); | |
2127 | } | |
2128 | } else { | |
2129 | /* disable VLAN tag insert/strip */ | |
2130 | ctrl = er32(CTRL); | |
2131 | ctrl &= ~E1000_CTRL_VME; | |
2132 | ew32(CTRL, ctrl); | |
2133 | ||
2134 | if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { | |
bc7f75fa AK |
2135 | if (adapter->mng_vlan_id != |
2136 | (u16)E1000_MNG_VLAN_NONE) { | |
2137 | e1000_vlan_rx_kill_vid(netdev, | |
2138 | adapter->mng_vlan_id); | |
2139 | adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; | |
2140 | } | |
2141 | } | |
2142 | } | |
2143 | ||
74ef9c39 JB |
2144 | if (!test_bit(__E1000_DOWN, &adapter->state)) |
2145 | e1000_irq_enable(adapter); | |
bc7f75fa AK |
2146 | } |
2147 | ||
2148 | static void e1000_restore_vlan(struct e1000_adapter *adapter) | |
2149 | { | |
2150 | u16 vid; | |
2151 | ||
2152 | e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp); | |
2153 | ||
2154 | if (!adapter->vlgrp) | |
2155 | return; | |
2156 | ||
2157 | for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { | |
2158 | if (!vlan_group_get_device(adapter->vlgrp, vid)) | |
2159 | continue; | |
2160 | e1000_vlan_rx_add_vid(adapter->netdev, vid); | |
2161 | } | |
2162 | } | |
2163 | ||
2164 | static void e1000_init_manageability(struct e1000_adapter *adapter) | |
2165 | { | |
2166 | struct e1000_hw *hw = &adapter->hw; | |
2167 | u32 manc, manc2h; | |
2168 | ||
2169 | if (!(adapter->flags & FLAG_MNG_PT_ENABLED)) | |
2170 | return; | |
2171 | ||
2172 | manc = er32(MANC); | |
2173 | ||
ad68076e BA |
2174 | /* |
2175 | * enable receiving management packets to the host. this will probably | |
bc7f75fa | 2176 | * generate destination unreachable messages from the host OS, but |
ad68076e BA |
2177 | * the packets will be handled on SMBUS |
2178 | */ | |
bc7f75fa AK |
2179 | manc |= E1000_MANC_EN_MNG2HOST; |
2180 | manc2h = er32(MANC2H); | |
2181 | #define E1000_MNG2HOST_PORT_623 (1 << 5) | |
2182 | #define E1000_MNG2HOST_PORT_664 (1 << 6) | |
2183 | manc2h |= E1000_MNG2HOST_PORT_623; | |
2184 | manc2h |= E1000_MNG2HOST_PORT_664; | |
2185 | ew32(MANC2H, manc2h); | |
2186 | ew32(MANC, manc); | |
2187 | } | |
2188 | ||
2189 | /** | |
2190 | * e1000_configure_tx - Configure 8254x Transmit Unit after Reset | |
2191 | * @adapter: board private structure | |
2192 | * | |
2193 | * Configure the Tx unit of the MAC after a reset. | |
2194 | **/ | |
2195 | static void e1000_configure_tx(struct e1000_adapter *adapter) | |
2196 | { | |
2197 | struct e1000_hw *hw = &adapter->hw; | |
2198 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
2199 | u64 tdba; | |
2200 | u32 tdlen, tctl, tipg, tarc; | |
2201 | u32 ipgr1, ipgr2; | |
2202 | ||
2203 | /* Setup the HW Tx Head and Tail descriptor pointers */ | |
2204 | tdba = tx_ring->dma; | |
2205 | tdlen = tx_ring->count * sizeof(struct e1000_tx_desc); | |
2206 | ew32(TDBAL, (tdba & DMA_32BIT_MASK)); | |
2207 | ew32(TDBAH, (tdba >> 32)); | |
2208 | ew32(TDLEN, tdlen); | |
2209 | ew32(TDH, 0); | |
2210 | ew32(TDT, 0); | |
2211 | tx_ring->head = E1000_TDH; | |
2212 | tx_ring->tail = E1000_TDT; | |
2213 | ||
2214 | /* Set the default values for the Tx Inter Packet Gap timer */ | |
2215 | tipg = DEFAULT_82543_TIPG_IPGT_COPPER; /* 8 */ | |
2216 | ipgr1 = DEFAULT_82543_TIPG_IPGR1; /* 8 */ | |
2217 | ipgr2 = DEFAULT_82543_TIPG_IPGR2; /* 6 */ | |
2218 | ||
2219 | if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN) | |
2220 | ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /* 7 */ | |
2221 | ||
2222 | tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT; | |
2223 | tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT; | |
2224 | ew32(TIPG, tipg); | |
2225 | ||
2226 | /* Set the Tx Interrupt Delay register */ | |
2227 | ew32(TIDV, adapter->tx_int_delay); | |
ad68076e | 2228 | /* Tx irq moderation */ |
bc7f75fa AK |
2229 | ew32(TADV, adapter->tx_abs_int_delay); |
2230 | ||
2231 | /* Program the Transmit Control Register */ | |
2232 | tctl = er32(TCTL); | |
2233 | tctl &= ~E1000_TCTL_CT; | |
2234 | tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | | |
2235 | (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); | |
2236 | ||
2237 | if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) { | |
e9ec2c0f | 2238 | tarc = er32(TARC(0)); |
ad68076e BA |
2239 | /* |
2240 | * set the speed mode bit, we'll clear it if we're not at | |
2241 | * gigabit link later | |
2242 | */ | |
bc7f75fa AK |
2243 | #define SPEED_MODE_BIT (1 << 21) |
2244 | tarc |= SPEED_MODE_BIT; | |
e9ec2c0f | 2245 | ew32(TARC(0), tarc); |
bc7f75fa AK |
2246 | } |
2247 | ||
2248 | /* errata: program both queues to unweighted RR */ | |
2249 | if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) { | |
e9ec2c0f | 2250 | tarc = er32(TARC(0)); |
bc7f75fa | 2251 | tarc |= 1; |
e9ec2c0f JK |
2252 | ew32(TARC(0), tarc); |
2253 | tarc = er32(TARC(1)); | |
bc7f75fa | 2254 | tarc |= 1; |
e9ec2c0f | 2255 | ew32(TARC(1), tarc); |
bc7f75fa AK |
2256 | } |
2257 | ||
2258 | e1000e_config_collision_dist(hw); | |
2259 | ||
2260 | /* Setup Transmit Descriptor Settings for eop descriptor */ | |
2261 | adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS; | |
2262 | ||
2263 | /* only set IDE if we are delaying interrupts using the timers */ | |
2264 | if (adapter->tx_int_delay) | |
2265 | adapter->txd_cmd |= E1000_TXD_CMD_IDE; | |
2266 | ||
2267 | /* enable Report Status bit */ | |
2268 | adapter->txd_cmd |= E1000_TXD_CMD_RS; | |
2269 | ||
2270 | ew32(TCTL, tctl); | |
2271 | ||
2272 | adapter->tx_queue_len = adapter->netdev->tx_queue_len; | |
2273 | } | |
2274 | ||
2275 | /** | |
2276 | * e1000_setup_rctl - configure the receive control registers | |
2277 | * @adapter: Board private structure | |
2278 | **/ | |
2279 | #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ | |
2280 | (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) | |
2281 | static void e1000_setup_rctl(struct e1000_adapter *adapter) | |
2282 | { | |
2283 | struct e1000_hw *hw = &adapter->hw; | |
2284 | u32 rctl, rfctl; | |
2285 | u32 psrctl = 0; | |
2286 | u32 pages = 0; | |
2287 | ||
2288 | /* Program MC offset vector base */ | |
2289 | rctl = er32(RCTL); | |
2290 | rctl &= ~(3 << E1000_RCTL_MO_SHIFT); | |
2291 | rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | | |
2292 | E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | | |
2293 | (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); | |
2294 | ||
2295 | /* Do not Store bad packets */ | |
2296 | rctl &= ~E1000_RCTL_SBP; | |
2297 | ||
2298 | /* Enable Long Packet receive */ | |
2299 | if (adapter->netdev->mtu <= ETH_DATA_LEN) | |
2300 | rctl &= ~E1000_RCTL_LPE; | |
2301 | else | |
2302 | rctl |= E1000_RCTL_LPE; | |
2303 | ||
5918bd88 AK |
2304 | /* Enable hardware CRC frame stripping */ |
2305 | rctl |= E1000_RCTL_SECRC; | |
2306 | ||
bc7f75fa AK |
2307 | /* Setup buffer sizes */ |
2308 | rctl &= ~E1000_RCTL_SZ_4096; | |
2309 | rctl |= E1000_RCTL_BSEX; | |
2310 | switch (adapter->rx_buffer_len) { | |
2311 | case 256: | |
2312 | rctl |= E1000_RCTL_SZ_256; | |
2313 | rctl &= ~E1000_RCTL_BSEX; | |
2314 | break; | |
2315 | case 512: | |
2316 | rctl |= E1000_RCTL_SZ_512; | |
2317 | rctl &= ~E1000_RCTL_BSEX; | |
2318 | break; | |
2319 | case 1024: | |
2320 | rctl |= E1000_RCTL_SZ_1024; | |
2321 | rctl &= ~E1000_RCTL_BSEX; | |
2322 | break; | |
2323 | case 2048: | |
2324 | default: | |
2325 | rctl |= E1000_RCTL_SZ_2048; | |
2326 | rctl &= ~E1000_RCTL_BSEX; | |
2327 | break; | |
2328 | case 4096: | |
2329 | rctl |= E1000_RCTL_SZ_4096; | |
2330 | break; | |
2331 | case 8192: | |
2332 | rctl |= E1000_RCTL_SZ_8192; | |
2333 | break; | |
2334 | case 16384: | |
2335 | rctl |= E1000_RCTL_SZ_16384; | |
2336 | break; | |
2337 | } | |
2338 | ||
2339 | /* | |
2340 | * 82571 and greater support packet-split where the protocol | |
2341 | * header is placed in skb->data and the packet data is | |
2342 | * placed in pages hanging off of skb_shinfo(skb)->nr_frags. | |
2343 | * In the case of a non-split, skb->data is linearly filled, | |
2344 | * followed by the page buffers. Therefore, skb->data is | |
2345 | * sized to hold the largest protocol header. | |
2346 | * | |
2347 | * allocations using alloc_page take too long for regular MTU | |
2348 | * so only enable packet split for jumbo frames | |
2349 | * | |
2350 | * Using pages when the page size is greater than 16k wastes | |
2351 | * a lot of memory, since we allocate 3 pages at all times | |
2352 | * per packet. | |
2353 | */ | |
bc7f75fa | 2354 | pages = PAGE_USE_COUNT(adapter->netdev->mtu); |
97ac8cae BA |
2355 | if (!(adapter->flags & FLAG_IS_ICH) && (pages <= 3) && |
2356 | (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE)) | |
bc7f75fa | 2357 | adapter->rx_ps_pages = pages; |
97ac8cae BA |
2358 | else |
2359 | adapter->rx_ps_pages = 0; | |
bc7f75fa AK |
2360 | |
2361 | if (adapter->rx_ps_pages) { | |
2362 | /* Configure extra packet-split registers */ | |
2363 | rfctl = er32(RFCTL); | |
2364 | rfctl |= E1000_RFCTL_EXTEN; | |
ad68076e BA |
2365 | /* |
2366 | * disable packet split support for IPv6 extension headers, | |
2367 | * because some malformed IPv6 headers can hang the Rx | |
2368 | */ | |
bc7f75fa AK |
2369 | rfctl |= (E1000_RFCTL_IPV6_EX_DIS | |
2370 | E1000_RFCTL_NEW_IPV6_EXT_DIS); | |
2371 | ||
2372 | ew32(RFCTL, rfctl); | |
2373 | ||
140a7480 AK |
2374 | /* Enable Packet split descriptors */ |
2375 | rctl |= E1000_RCTL_DTYP_PS; | |
bc7f75fa AK |
2376 | |
2377 | psrctl |= adapter->rx_ps_bsize0 >> | |
2378 | E1000_PSRCTL_BSIZE0_SHIFT; | |
2379 | ||
2380 | switch (adapter->rx_ps_pages) { | |
2381 | case 3: | |
2382 | psrctl |= PAGE_SIZE << | |
2383 | E1000_PSRCTL_BSIZE3_SHIFT; | |
2384 | case 2: | |
2385 | psrctl |= PAGE_SIZE << | |
2386 | E1000_PSRCTL_BSIZE2_SHIFT; | |
2387 | case 1: | |
2388 | psrctl |= PAGE_SIZE >> | |
2389 | E1000_PSRCTL_BSIZE1_SHIFT; | |
2390 | break; | |
2391 | } | |
2392 | ||
2393 | ew32(PSRCTL, psrctl); | |
2394 | } | |
2395 | ||
2396 | ew32(RCTL, rctl); | |
318a94d6 JK |
2397 | /* just started the receive unit, no need to restart */ |
2398 | adapter->flags &= ~FLAG_RX_RESTART_NOW; | |
bc7f75fa AK |
2399 | } |
2400 | ||
2401 | /** | |
2402 | * e1000_configure_rx - Configure Receive Unit after Reset | |
2403 | * @adapter: board private structure | |
2404 | * | |
2405 | * Configure the Rx unit of the MAC after a reset. | |
2406 | **/ | |
2407 | static void e1000_configure_rx(struct e1000_adapter *adapter) | |
2408 | { | |
2409 | struct e1000_hw *hw = &adapter->hw; | |
2410 | struct e1000_ring *rx_ring = adapter->rx_ring; | |
2411 | u64 rdba; | |
2412 | u32 rdlen, rctl, rxcsum, ctrl_ext; | |
2413 | ||
2414 | if (adapter->rx_ps_pages) { | |
2415 | /* this is a 32 byte descriptor */ | |
2416 | rdlen = rx_ring->count * | |
2417 | sizeof(union e1000_rx_desc_packet_split); | |
2418 | adapter->clean_rx = e1000_clean_rx_irq_ps; | |
2419 | adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; | |
97ac8cae BA |
2420 | } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) { |
2421 | rdlen = rx_ring->count * sizeof(struct e1000_rx_desc); | |
2422 | adapter->clean_rx = e1000_clean_jumbo_rx_irq; | |
2423 | adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers; | |
bc7f75fa | 2424 | } else { |
97ac8cae | 2425 | rdlen = rx_ring->count * sizeof(struct e1000_rx_desc); |
bc7f75fa AK |
2426 | adapter->clean_rx = e1000_clean_rx_irq; |
2427 | adapter->alloc_rx_buf = e1000_alloc_rx_buffers; | |
2428 | } | |
2429 | ||
2430 | /* disable receives while setting up the descriptors */ | |
2431 | rctl = er32(RCTL); | |
2432 | ew32(RCTL, rctl & ~E1000_RCTL_EN); | |
2433 | e1e_flush(); | |
2434 | msleep(10); | |
2435 | ||
2436 | /* set the Receive Delay Timer Register */ | |
2437 | ew32(RDTR, adapter->rx_int_delay); | |
2438 | ||
2439 | /* irq moderation */ | |
2440 | ew32(RADV, adapter->rx_abs_int_delay); | |
2441 | if (adapter->itr_setting != 0) | |
ad68076e | 2442 | ew32(ITR, 1000000000 / (adapter->itr * 256)); |
bc7f75fa AK |
2443 | |
2444 | ctrl_ext = er32(CTRL_EXT); | |
2445 | /* Reset delay timers after every interrupt */ | |
2446 | ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR; | |
2447 | /* Auto-Mask interrupts upon ICR access */ | |
2448 | ctrl_ext |= E1000_CTRL_EXT_IAME; | |
2449 | ew32(IAM, 0xffffffff); | |
2450 | ew32(CTRL_EXT, ctrl_ext); | |
2451 | e1e_flush(); | |
2452 | ||
ad68076e BA |
2453 | /* |
2454 | * Setup the HW Rx Head and Tail Descriptor Pointers and | |
2455 | * the Base and Length of the Rx Descriptor Ring | |
2456 | */ | |
bc7f75fa AK |
2457 | rdba = rx_ring->dma; |
2458 | ew32(RDBAL, (rdba & DMA_32BIT_MASK)); | |
2459 | ew32(RDBAH, (rdba >> 32)); | |
2460 | ew32(RDLEN, rdlen); | |
2461 | ew32(RDH, 0); | |
2462 | ew32(RDT, 0); | |
2463 | rx_ring->head = E1000_RDH; | |
2464 | rx_ring->tail = E1000_RDT; | |
2465 | ||
2466 | /* Enable Receive Checksum Offload for TCP and UDP */ | |
2467 | rxcsum = er32(RXCSUM); | |
2468 | if (adapter->flags & FLAG_RX_CSUM_ENABLED) { | |
2469 | rxcsum |= E1000_RXCSUM_TUOFL; | |
2470 | ||
ad68076e BA |
2471 | /* |
2472 | * IPv4 payload checksum for UDP fragments must be | |
2473 | * used in conjunction with packet-split. | |
2474 | */ | |
bc7f75fa AK |
2475 | if (adapter->rx_ps_pages) |
2476 | rxcsum |= E1000_RXCSUM_IPPCSE; | |
2477 | } else { | |
2478 | rxcsum &= ~E1000_RXCSUM_TUOFL; | |
2479 | /* no need to clear IPPCSE as it defaults to 0 */ | |
2480 | } | |
2481 | ew32(RXCSUM, rxcsum); | |
2482 | ||
ad68076e BA |
2483 | /* |
2484 | * Enable early receives on supported devices, only takes effect when | |
bc7f75fa | 2485 | * packet size is equal or larger than the specified value (in 8 byte |
ad68076e BA |
2486 | * units), e.g. using jumbo frames when setting to E1000_ERT_2048 |
2487 | */ | |
bc7f75fa | 2488 | if ((adapter->flags & FLAG_HAS_ERT) && |
97ac8cae BA |
2489 | (adapter->netdev->mtu > ETH_DATA_LEN)) { |
2490 | u32 rxdctl = er32(RXDCTL(0)); | |
2491 | ew32(RXDCTL(0), rxdctl | 0x3); | |
2492 | ew32(ERT, E1000_ERT_2048 | (1 << 13)); | |
2493 | /* | |
2494 | * With jumbo frames and early-receive enabled, excessive | |
2495 | * C4->C2 latencies result in dropped transactions. | |
2496 | */ | |
2497 | pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, | |
2498 | e1000e_driver_name, 55); | |
2499 | } else { | |
2500 | pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, | |
2501 | e1000e_driver_name, | |
2502 | PM_QOS_DEFAULT_VALUE); | |
2503 | } | |
bc7f75fa AK |
2504 | |
2505 | /* Enable Receives */ | |
2506 | ew32(RCTL, rctl); | |
2507 | } | |
2508 | ||
2509 | /** | |
e2de3eb6 | 2510 | * e1000_update_mc_addr_list - Update Multicast addresses |
bc7f75fa AK |
2511 | * @hw: pointer to the HW structure |
2512 | * @mc_addr_list: array of multicast addresses to program | |
2513 | * @mc_addr_count: number of multicast addresses to program | |
2514 | * @rar_used_count: the first RAR register free to program | |
2515 | * @rar_count: total number of supported Receive Address Registers | |
2516 | * | |
2517 | * Updates the Receive Address Registers and Multicast Table Array. | |
2518 | * The caller must have a packed mc_addr_list of multicast addresses. | |
2519 | * The parameter rar_count will usually be hw->mac.rar_entry_count | |
2520 | * unless there are workarounds that change this. Currently no func pointer | |
2521 | * exists and all implementations are handled in the generic version of this | |
2522 | * function. | |
2523 | **/ | |
e2de3eb6 JK |
2524 | static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, |
2525 | u32 mc_addr_count, u32 rar_used_count, | |
2526 | u32 rar_count) | |
bc7f75fa | 2527 | { |
e2de3eb6 | 2528 | hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count, |
bc7f75fa AK |
2529 | rar_used_count, rar_count); |
2530 | } | |
2531 | ||
2532 | /** | |
2533 | * e1000_set_multi - Multicast and Promiscuous mode set | |
2534 | * @netdev: network interface device structure | |
2535 | * | |
2536 | * The set_multi entry point is called whenever the multicast address | |
2537 | * list or the network interface flags are updated. This routine is | |
2538 | * responsible for configuring the hardware for proper multicast, | |
2539 | * promiscuous mode, and all-multi behavior. | |
2540 | **/ | |
2541 | static void e1000_set_multi(struct net_device *netdev) | |
2542 | { | |
2543 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
2544 | struct e1000_hw *hw = &adapter->hw; | |
2545 | struct e1000_mac_info *mac = &hw->mac; | |
2546 | struct dev_mc_list *mc_ptr; | |
2547 | u8 *mta_list; | |
2548 | u32 rctl; | |
2549 | int i; | |
2550 | ||
2551 | /* Check for Promiscuous and All Multicast modes */ | |
2552 | ||
2553 | rctl = er32(RCTL); | |
2554 | ||
2555 | if (netdev->flags & IFF_PROMISC) { | |
2556 | rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); | |
746b9f02 | 2557 | rctl &= ~E1000_RCTL_VFE; |
bc7f75fa | 2558 | } else { |
746b9f02 PM |
2559 | if (netdev->flags & IFF_ALLMULTI) { |
2560 | rctl |= E1000_RCTL_MPE; | |
2561 | rctl &= ~E1000_RCTL_UPE; | |
2562 | } else { | |
2563 | rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); | |
2564 | } | |
78ed11a5 | 2565 | if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) |
746b9f02 | 2566 | rctl |= E1000_RCTL_VFE; |
bc7f75fa AK |
2567 | } |
2568 | ||
2569 | ew32(RCTL, rctl); | |
2570 | ||
2571 | if (netdev->mc_count) { | |
2572 | mta_list = kmalloc(netdev->mc_count * 6, GFP_ATOMIC); | |
2573 | if (!mta_list) | |
2574 | return; | |
2575 | ||
2576 | /* prepare a packed array of only addresses. */ | |
2577 | mc_ptr = netdev->mc_list; | |
2578 | ||
2579 | for (i = 0; i < netdev->mc_count; i++) { | |
2580 | if (!mc_ptr) | |
2581 | break; | |
2582 | memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, | |
2583 | ETH_ALEN); | |
2584 | mc_ptr = mc_ptr->next; | |
2585 | } | |
2586 | ||
e2de3eb6 | 2587 | e1000_update_mc_addr_list(hw, mta_list, i, 1, |
bc7f75fa AK |
2588 | mac->rar_entry_count); |
2589 | kfree(mta_list); | |
2590 | } else { | |
2591 | /* | |
2592 | * if we're called from probe, we might not have | |
2593 | * anything to do here, so clear out the list | |
2594 | */ | |
e2de3eb6 | 2595 | e1000_update_mc_addr_list(hw, NULL, 0, 1, mac->rar_entry_count); |
bc7f75fa AK |
2596 | } |
2597 | } | |
2598 | ||
2599 | /** | |
ad68076e | 2600 | * e1000_configure - configure the hardware for Rx and Tx |
bc7f75fa AK |
2601 | * @adapter: private board structure |
2602 | **/ | |
2603 | static void e1000_configure(struct e1000_adapter *adapter) | |
2604 | { | |
2605 | e1000_set_multi(adapter->netdev); | |
2606 | ||
2607 | e1000_restore_vlan(adapter); | |
2608 | e1000_init_manageability(adapter); | |
2609 | ||
2610 | e1000_configure_tx(adapter); | |
2611 | e1000_setup_rctl(adapter); | |
2612 | e1000_configure_rx(adapter); | |
ad68076e | 2613 | adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring)); |
bc7f75fa AK |
2614 | } |
2615 | ||
2616 | /** | |
2617 | * e1000e_power_up_phy - restore link in case the phy was powered down | |
2618 | * @adapter: address of board private structure | |
2619 | * | |
2620 | * The phy may be powered down to save power and turn off link when the | |
2621 | * driver is unloaded and wake on lan is not enabled (among others) | |
2622 | * *** this routine MUST be followed by a call to e1000e_reset *** | |
2623 | **/ | |
2624 | void e1000e_power_up_phy(struct e1000_adapter *adapter) | |
2625 | { | |
2626 | u16 mii_reg = 0; | |
2627 | ||
2628 | /* Just clear the power down bit to wake the phy back up */ | |
318a94d6 | 2629 | if (adapter->hw.phy.media_type == e1000_media_type_copper) { |
ad68076e BA |
2630 | /* |
2631 | * According to the manual, the phy will retain its | |
2632 | * settings across a power-down/up cycle | |
2633 | */ | |
bc7f75fa AK |
2634 | e1e_rphy(&adapter->hw, PHY_CONTROL, &mii_reg); |
2635 | mii_reg &= ~MII_CR_POWER_DOWN; | |
2636 | e1e_wphy(&adapter->hw, PHY_CONTROL, mii_reg); | |
2637 | } | |
2638 | ||
2639 | adapter->hw.mac.ops.setup_link(&adapter->hw); | |
2640 | } | |
2641 | ||
2642 | /** | |
2643 | * e1000_power_down_phy - Power down the PHY | |
2644 | * | |
2645 | * Power down the PHY so no link is implied when interface is down | |
2646 | * The PHY cannot be powered down is management or WoL is active | |
2647 | */ | |
2648 | static void e1000_power_down_phy(struct e1000_adapter *adapter) | |
2649 | { | |
2650 | struct e1000_hw *hw = &adapter->hw; | |
2651 | u16 mii_reg; | |
2652 | ||
2653 | /* WoL is enabled */ | |
23b66e2b | 2654 | if (adapter->wol) |
bc7f75fa AK |
2655 | return; |
2656 | ||
2657 | /* non-copper PHY? */ | |
318a94d6 | 2658 | if (adapter->hw.phy.media_type != e1000_media_type_copper) |
bc7f75fa AK |
2659 | return; |
2660 | ||
2661 | /* reset is blocked because of a SoL/IDER session */ | |
ad68076e | 2662 | if (e1000e_check_mng_mode(hw) || e1000_check_reset_block(hw)) |
bc7f75fa AK |
2663 | return; |
2664 | ||
489815ce | 2665 | /* manageability (AMT) is enabled */ |
bc7f75fa AK |
2666 | if (er32(MANC) & E1000_MANC_SMBUS_EN) |
2667 | return; | |
2668 | ||
2669 | /* power down the PHY */ | |
2670 | e1e_rphy(hw, PHY_CONTROL, &mii_reg); | |
2671 | mii_reg |= MII_CR_POWER_DOWN; | |
2672 | e1e_wphy(hw, PHY_CONTROL, mii_reg); | |
2673 | mdelay(1); | |
2674 | } | |
2675 | ||
2676 | /** | |
2677 | * e1000e_reset - bring the hardware into a known good state | |
2678 | * | |
2679 | * This function boots the hardware and enables some settings that | |
2680 | * require a configuration cycle of the hardware - those cannot be | |
2681 | * set/changed during runtime. After reset the device needs to be | |
ad68076e | 2682 | * properly configured for Rx, Tx etc. |
bc7f75fa AK |
2683 | */ |
2684 | void e1000e_reset(struct e1000_adapter *adapter) | |
2685 | { | |
2686 | struct e1000_mac_info *mac = &adapter->hw.mac; | |
318a94d6 | 2687 | struct e1000_fc_info *fc = &adapter->hw.fc; |
bc7f75fa AK |
2688 | struct e1000_hw *hw = &adapter->hw; |
2689 | u32 tx_space, min_tx_space, min_rx_space; | |
318a94d6 | 2690 | u32 pba = adapter->pba; |
bc7f75fa AK |
2691 | u16 hwm; |
2692 | ||
ad68076e | 2693 | /* reset Packet Buffer Allocation to default */ |
318a94d6 | 2694 | ew32(PBA, pba); |
df762464 | 2695 | |
318a94d6 | 2696 | if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { |
ad68076e BA |
2697 | /* |
2698 | * To maintain wire speed transmits, the Tx FIFO should be | |
bc7f75fa AK |
2699 | * large enough to accommodate two full transmit packets, |
2700 | * rounded up to the next 1KB and expressed in KB. Likewise, | |
2701 | * the Rx FIFO should be large enough to accommodate at least | |
2702 | * one full receive packet and is similarly rounded up and | |
ad68076e BA |
2703 | * expressed in KB. |
2704 | */ | |
df762464 | 2705 | pba = er32(PBA); |
bc7f75fa | 2706 | /* upper 16 bits has Tx packet buffer allocation size in KB */ |
df762464 | 2707 | tx_space = pba >> 16; |
bc7f75fa | 2708 | /* lower 16 bits has Rx packet buffer allocation size in KB */ |
df762464 | 2709 | pba &= 0xffff; |
ad68076e BA |
2710 | /* |
2711 | * the Tx fifo also stores 16 bytes of information about the tx | |
2712 | * but don't include ethernet FCS because hardware appends it | |
318a94d6 JK |
2713 | */ |
2714 | min_tx_space = (adapter->max_frame_size + | |
bc7f75fa AK |
2715 | sizeof(struct e1000_tx_desc) - |
2716 | ETH_FCS_LEN) * 2; | |
2717 | min_tx_space = ALIGN(min_tx_space, 1024); | |
2718 | min_tx_space >>= 10; | |
2719 | /* software strips receive CRC, so leave room for it */ | |
318a94d6 | 2720 | min_rx_space = adapter->max_frame_size; |
bc7f75fa AK |
2721 | min_rx_space = ALIGN(min_rx_space, 1024); |
2722 | min_rx_space >>= 10; | |
2723 | ||
ad68076e BA |
2724 | /* |
2725 | * If current Tx allocation is less than the min Tx FIFO size, | |
bc7f75fa | 2726 | * and the min Tx FIFO size is less than the current Rx FIFO |
ad68076e BA |
2727 | * allocation, take space away from current Rx allocation |
2728 | */ | |
df762464 AK |
2729 | if ((tx_space < min_tx_space) && |
2730 | ((min_tx_space - tx_space) < pba)) { | |
2731 | pba -= min_tx_space - tx_space; | |
bc7f75fa | 2732 | |
ad68076e BA |
2733 | /* |
2734 | * if short on Rx space, Rx wins and must trump tx | |
2735 | * adjustment or use Early Receive if available | |
2736 | */ | |
df762464 | 2737 | if ((pba < min_rx_space) && |
bc7f75fa AK |
2738 | (!(adapter->flags & FLAG_HAS_ERT))) |
2739 | /* ERT enabled in e1000_configure_rx */ | |
df762464 | 2740 | pba = min_rx_space; |
bc7f75fa | 2741 | } |
df762464 AK |
2742 | |
2743 | ew32(PBA, pba); | |
bc7f75fa AK |
2744 | } |
2745 | ||
bc7f75fa | 2746 | |
ad68076e BA |
2747 | /* |
2748 | * flow control settings | |
2749 | * | |
2750 | * The high water mark must be low enough to fit one full frame | |
bc7f75fa AK |
2751 | * (or the size used for early receive) above it in the Rx FIFO. |
2752 | * Set it to the lower of: | |
2753 | * - 90% of the Rx FIFO size, and | |
2754 | * - the full Rx FIFO size minus the early receive size (for parts | |
2755 | * with ERT support assuming ERT set to E1000_ERT_2048), or | |
ad68076e BA |
2756 | * - the full Rx FIFO size minus one full frame |
2757 | */ | |
bc7f75fa | 2758 | if (adapter->flags & FLAG_HAS_ERT) |
318a94d6 JK |
2759 | hwm = min(((pba << 10) * 9 / 10), |
2760 | ((pba << 10) - (E1000_ERT_2048 << 3))); | |
bc7f75fa | 2761 | else |
318a94d6 JK |
2762 | hwm = min(((pba << 10) * 9 / 10), |
2763 | ((pba << 10) - adapter->max_frame_size)); | |
bc7f75fa | 2764 | |
318a94d6 JK |
2765 | fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */ |
2766 | fc->low_water = fc->high_water - 8; | |
bc7f75fa AK |
2767 | |
2768 | if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME) | |
318a94d6 | 2769 | fc->pause_time = 0xFFFF; |
bc7f75fa | 2770 | else |
318a94d6 JK |
2771 | fc->pause_time = E1000_FC_PAUSE_TIME; |
2772 | fc->send_xon = 1; | |
2773 | fc->type = fc->original_type; | |
bc7f75fa AK |
2774 | |
2775 | /* Allow time for pending master requests to run */ | |
2776 | mac->ops.reset_hw(hw); | |
97ac8cae BA |
2777 | |
2778 | /* | |
2779 | * For parts with AMT enabled, let the firmware know | |
2780 | * that the network interface is in control | |
2781 | */ | |
c43bc57e | 2782 | if (adapter->flags & FLAG_HAS_AMT) |
97ac8cae BA |
2783 | e1000_get_hw_control(adapter); |
2784 | ||
bc7f75fa AK |
2785 | ew32(WUC, 0); |
2786 | ||
2787 | if (mac->ops.init_hw(hw)) | |
44defeb3 | 2788 | e_err("Hardware Error\n"); |
bc7f75fa AK |
2789 | |
2790 | e1000_update_mng_vlan(adapter); | |
2791 | ||
2792 | /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ | |
2793 | ew32(VET, ETH_P_8021Q); | |
2794 | ||
2795 | e1000e_reset_adaptive(hw); | |
2796 | e1000_get_phy_info(hw); | |
2797 | ||
2798 | if (!(adapter->flags & FLAG_SMART_POWER_DOWN)) { | |
2799 | u16 phy_data = 0; | |
ad68076e BA |
2800 | /* |
2801 | * speed up time to link by disabling smart power down, ignore | |
bc7f75fa | 2802 | * the return value of this function because there is nothing |
ad68076e BA |
2803 | * different we would do if it failed |
2804 | */ | |
bc7f75fa AK |
2805 | e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); |
2806 | phy_data &= ~IGP02E1000_PM_SPD; | |
2807 | e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); | |
2808 | } | |
bc7f75fa AK |
2809 | } |
2810 | ||
2811 | int e1000e_up(struct e1000_adapter *adapter) | |
2812 | { | |
2813 | struct e1000_hw *hw = &adapter->hw; | |
2814 | ||
2815 | /* hardware has been reset, we need to reload some things */ | |
2816 | e1000_configure(adapter); | |
2817 | ||
2818 | clear_bit(__E1000_DOWN, &adapter->state); | |
2819 | ||
2820 | napi_enable(&adapter->napi); | |
4662e82b BA |
2821 | if (adapter->msix_entries) |
2822 | e1000_configure_msix(adapter); | |
bc7f75fa AK |
2823 | e1000_irq_enable(adapter); |
2824 | ||
2825 | /* fire a link change interrupt to start the watchdog */ | |
2826 | ew32(ICS, E1000_ICS_LSC); | |
2827 | return 0; | |
2828 | } | |
2829 | ||
2830 | void e1000e_down(struct e1000_adapter *adapter) | |
2831 | { | |
2832 | struct net_device *netdev = adapter->netdev; | |
2833 | struct e1000_hw *hw = &adapter->hw; | |
2834 | u32 tctl, rctl; | |
2835 | ||
ad68076e BA |
2836 | /* |
2837 | * signal that we're down so the interrupt handler does not | |
2838 | * reschedule our watchdog timer | |
2839 | */ | |
bc7f75fa AK |
2840 | set_bit(__E1000_DOWN, &adapter->state); |
2841 | ||
2842 | /* disable receives in the hardware */ | |
2843 | rctl = er32(RCTL); | |
2844 | ew32(RCTL, rctl & ~E1000_RCTL_EN); | |
2845 | /* flush and sleep below */ | |
2846 | ||
d55b53ff | 2847 | netif_tx_stop_all_queues(netdev); |
bc7f75fa AK |
2848 | |
2849 | /* disable transmits in the hardware */ | |
2850 | tctl = er32(TCTL); | |
2851 | tctl &= ~E1000_TCTL_EN; | |
2852 | ew32(TCTL, tctl); | |
2853 | /* flush both disables and wait for them to finish */ | |
2854 | e1e_flush(); | |
2855 | msleep(10); | |
2856 | ||
2857 | napi_disable(&adapter->napi); | |
2858 | e1000_irq_disable(adapter); | |
2859 | ||
2860 | del_timer_sync(&adapter->watchdog_timer); | |
2861 | del_timer_sync(&adapter->phy_info_timer); | |
2862 | ||
2863 | netdev->tx_queue_len = adapter->tx_queue_len; | |
2864 | netif_carrier_off(netdev); | |
2865 | adapter->link_speed = 0; | |
2866 | adapter->link_duplex = 0; | |
2867 | ||
52cc3086 JK |
2868 | if (!pci_channel_offline(adapter->pdev)) |
2869 | e1000e_reset(adapter); | |
bc7f75fa AK |
2870 | e1000_clean_tx_ring(adapter); |
2871 | e1000_clean_rx_ring(adapter); | |
2872 | ||
2873 | /* | |
2874 | * TODO: for power management, we could drop the link and | |
2875 | * pci_disable_device here. | |
2876 | */ | |
2877 | } | |
2878 | ||
2879 | void e1000e_reinit_locked(struct e1000_adapter *adapter) | |
2880 | { | |
2881 | might_sleep(); | |
2882 | while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) | |
2883 | msleep(1); | |
2884 | e1000e_down(adapter); | |
2885 | e1000e_up(adapter); | |
2886 | clear_bit(__E1000_RESETTING, &adapter->state); | |
2887 | } | |
2888 | ||
2889 | /** | |
2890 | * e1000_sw_init - Initialize general software structures (struct e1000_adapter) | |
2891 | * @adapter: board private structure to initialize | |
2892 | * | |
2893 | * e1000_sw_init initializes the Adapter private data structure. | |
2894 | * Fields are initialized based on PCI device information and | |
2895 | * OS network device settings (MTU size). | |
2896 | **/ | |
2897 | static int __devinit e1000_sw_init(struct e1000_adapter *adapter) | |
2898 | { | |
bc7f75fa AK |
2899 | struct net_device *netdev = adapter->netdev; |
2900 | ||
2901 | adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; | |
2902 | adapter->rx_ps_bsize0 = 128; | |
318a94d6 JK |
2903 | adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; |
2904 | adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; | |
bc7f75fa | 2905 | |
4662e82b | 2906 | e1000e_set_interrupt_capability(adapter); |
bc7f75fa | 2907 | |
4662e82b BA |
2908 | if (e1000_alloc_queues(adapter)) |
2909 | return -ENOMEM; | |
bc7f75fa AK |
2910 | |
2911 | spin_lock_init(&adapter->tx_queue_lock); | |
2912 | ||
2913 | /* Explicitly disable IRQ since the NIC can be in any state. */ | |
bc7f75fa AK |
2914 | e1000_irq_disable(adapter); |
2915 | ||
bc7f75fa AK |
2916 | set_bit(__E1000_DOWN, &adapter->state); |
2917 | return 0; | |
bc7f75fa AK |
2918 | } |
2919 | ||
f8d59f78 BA |
2920 | /** |
2921 | * e1000_intr_msi_test - Interrupt Handler | |
2922 | * @irq: interrupt number | |
2923 | * @data: pointer to a network interface device structure | |
2924 | **/ | |
2925 | static irqreturn_t e1000_intr_msi_test(int irq, void *data) | |
2926 | { | |
2927 | struct net_device *netdev = data; | |
2928 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
2929 | struct e1000_hw *hw = &adapter->hw; | |
2930 | u32 icr = er32(ICR); | |
2931 | ||
2932 | e_dbg("%s: icr is %08X\n", netdev->name, icr); | |
2933 | if (icr & E1000_ICR_RXSEQ) { | |
2934 | adapter->flags &= ~FLAG_MSI_TEST_FAILED; | |
2935 | wmb(); | |
2936 | } | |
2937 | ||
2938 | return IRQ_HANDLED; | |
2939 | } | |
2940 | ||
2941 | /** | |
2942 | * e1000_test_msi_interrupt - Returns 0 for successful test | |
2943 | * @adapter: board private struct | |
2944 | * | |
2945 | * code flow taken from tg3.c | |
2946 | **/ | |
2947 | static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) | |
2948 | { | |
2949 | struct net_device *netdev = adapter->netdev; | |
2950 | struct e1000_hw *hw = &adapter->hw; | |
2951 | int err; | |
2952 | ||
2953 | /* poll_enable hasn't been called yet, so don't need disable */ | |
2954 | /* clear any pending events */ | |
2955 | er32(ICR); | |
2956 | ||
2957 | /* free the real vector and request a test handler */ | |
2958 | e1000_free_irq(adapter); | |
4662e82b | 2959 | e1000e_reset_interrupt_capability(adapter); |
f8d59f78 BA |
2960 | |
2961 | /* Assume that the test fails, if it succeeds then the test | |
2962 | * MSI irq handler will unset this flag */ | |
2963 | adapter->flags |= FLAG_MSI_TEST_FAILED; | |
2964 | ||
2965 | err = pci_enable_msi(adapter->pdev); | |
2966 | if (err) | |
2967 | goto msi_test_failed; | |
2968 | ||
2969 | err = request_irq(adapter->pdev->irq, &e1000_intr_msi_test, 0, | |
2970 | netdev->name, netdev); | |
2971 | if (err) { | |
2972 | pci_disable_msi(adapter->pdev); | |
2973 | goto msi_test_failed; | |
2974 | } | |
2975 | ||
2976 | wmb(); | |
2977 | ||
2978 | e1000_irq_enable(adapter); | |
2979 | ||
2980 | /* fire an unusual interrupt on the test handler */ | |
2981 | ew32(ICS, E1000_ICS_RXSEQ); | |
2982 | e1e_flush(); | |
2983 | msleep(50); | |
2984 | ||
2985 | e1000_irq_disable(adapter); | |
2986 | ||
2987 | rmb(); | |
2988 | ||
2989 | if (adapter->flags & FLAG_MSI_TEST_FAILED) { | |
4662e82b | 2990 | adapter->int_mode = E1000E_INT_MODE_LEGACY; |
f8d59f78 BA |
2991 | err = -EIO; |
2992 | e_info("MSI interrupt test failed!\n"); | |
2993 | } | |
2994 | ||
2995 | free_irq(adapter->pdev->irq, netdev); | |
2996 | pci_disable_msi(adapter->pdev); | |
2997 | ||
2998 | if (err == -EIO) | |
2999 | goto msi_test_failed; | |
3000 | ||
3001 | /* okay so the test worked, restore settings */ | |
3002 | e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name); | |
3003 | msi_test_failed: | |
4662e82b | 3004 | e1000e_set_interrupt_capability(adapter); |
f8d59f78 BA |
3005 | e1000_request_irq(adapter); |
3006 | return err; | |
3007 | } | |
3008 | ||
3009 | /** | |
3010 | * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored | |
3011 | * @adapter: board private struct | |
3012 | * | |
3013 | * code flow taken from tg3.c, called with e1000 interrupts disabled. | |
3014 | **/ | |
3015 | static int e1000_test_msi(struct e1000_adapter *adapter) | |
3016 | { | |
3017 | int err; | |
3018 | u16 pci_cmd; | |
3019 | ||
3020 | if (!(adapter->flags & FLAG_MSI_ENABLED)) | |
3021 | return 0; | |
3022 | ||
3023 | /* disable SERR in case the MSI write causes a master abort */ | |
3024 | pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd); | |
3025 | pci_write_config_word(adapter->pdev, PCI_COMMAND, | |
3026 | pci_cmd & ~PCI_COMMAND_SERR); | |
3027 | ||
3028 | err = e1000_test_msi_interrupt(adapter); | |
3029 | ||
3030 | /* restore previous setting of command word */ | |
3031 | pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd); | |
3032 | ||
3033 | /* success ! */ | |
3034 | if (!err) | |
3035 | return 0; | |
3036 | ||
3037 | /* EIO means MSI test failed */ | |
3038 | if (err != -EIO) | |
3039 | return err; | |
3040 | ||
3041 | /* back to INTx mode */ | |
3042 | e_warn("MSI interrupt test failed, using legacy interrupt.\n"); | |
3043 | ||
3044 | e1000_free_irq(adapter); | |
3045 | ||
3046 | err = e1000_request_irq(adapter); | |
3047 | ||
3048 | return err; | |
3049 | } | |
3050 | ||
bc7f75fa AK |
3051 | /** |
3052 | * e1000_open - Called when a network interface is made active | |
3053 | * @netdev: network interface device structure | |
3054 | * | |
3055 | * Returns 0 on success, negative value on failure | |
3056 | * | |
3057 | * The open entry point is called when a network interface is made | |
3058 | * active by the system (IFF_UP). At this point all resources needed | |
3059 | * for transmit and receive operations are allocated, the interrupt | |
3060 | * handler is registered with the OS, the watchdog timer is started, | |
3061 | * and the stack is notified that the interface is ready. | |
3062 | **/ | |
3063 | static int e1000_open(struct net_device *netdev) | |
3064 | { | |
3065 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
3066 | struct e1000_hw *hw = &adapter->hw; | |
3067 | int err; | |
3068 | ||
3069 | /* disallow open during test */ | |
3070 | if (test_bit(__E1000_TESTING, &adapter->state)) | |
3071 | return -EBUSY; | |
3072 | ||
3073 | /* allocate transmit descriptors */ | |
3074 | err = e1000e_setup_tx_resources(adapter); | |
3075 | if (err) | |
3076 | goto err_setup_tx; | |
3077 | ||
3078 | /* allocate receive descriptors */ | |
3079 | err = e1000e_setup_rx_resources(adapter); | |
3080 | if (err) | |
3081 | goto err_setup_rx; | |
3082 | ||
3083 | e1000e_power_up_phy(adapter); | |
3084 | ||
3085 | adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; | |
3086 | if ((adapter->hw.mng_cookie.status & | |
3087 | E1000_MNG_DHCP_COOKIE_STATUS_VLAN)) | |
3088 | e1000_update_mng_vlan(adapter); | |
3089 | ||
ad68076e BA |
3090 | /* |
3091 | * If AMT is enabled, let the firmware know that the network | |
3092 | * interface is now open | |
3093 | */ | |
c43bc57e | 3094 | if (adapter->flags & FLAG_HAS_AMT) |
bc7f75fa AK |
3095 | e1000_get_hw_control(adapter); |
3096 | ||
ad68076e BA |
3097 | /* |
3098 | * before we allocate an interrupt, we must be ready to handle it. | |
bc7f75fa AK |
3099 | * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt |
3100 | * as soon as we call pci_request_irq, so we have to setup our | |
ad68076e BA |
3101 | * clean_rx handler before we do so. |
3102 | */ | |
bc7f75fa AK |
3103 | e1000_configure(adapter); |
3104 | ||
3105 | err = e1000_request_irq(adapter); | |
3106 | if (err) | |
3107 | goto err_req_irq; | |
3108 | ||
f8d59f78 BA |
3109 | /* |
3110 | * Work around PCIe errata with MSI interrupts causing some chipsets to | |
3111 | * ignore e1000e MSI messages, which means we need to test our MSI | |
3112 | * interrupt now | |
3113 | */ | |
4662e82b | 3114 | if (adapter->int_mode != E1000E_INT_MODE_LEGACY) { |
f8d59f78 BA |
3115 | err = e1000_test_msi(adapter); |
3116 | if (err) { | |
3117 | e_err("Interrupt allocation failed\n"); | |
3118 | goto err_req_irq; | |
3119 | } | |
3120 | } | |
3121 | ||
bc7f75fa AK |
3122 | /* From here on the code is the same as e1000e_up() */ |
3123 | clear_bit(__E1000_DOWN, &adapter->state); | |
3124 | ||
3125 | napi_enable(&adapter->napi); | |
3126 | ||
3127 | e1000_irq_enable(adapter); | |
3128 | ||
d55b53ff JK |
3129 | netif_tx_start_all_queues(netdev); |
3130 | ||
bc7f75fa AK |
3131 | /* fire a link status change interrupt to start the watchdog */ |
3132 | ew32(ICS, E1000_ICS_LSC); | |
3133 | ||
3134 | return 0; | |
3135 | ||
3136 | err_req_irq: | |
3137 | e1000_release_hw_control(adapter); | |
3138 | e1000_power_down_phy(adapter); | |
3139 | e1000e_free_rx_resources(adapter); | |
3140 | err_setup_rx: | |
3141 | e1000e_free_tx_resources(adapter); | |
3142 | err_setup_tx: | |
3143 | e1000e_reset(adapter); | |
3144 | ||
3145 | return err; | |
3146 | } | |
3147 | ||
3148 | /** | |
3149 | * e1000_close - Disables a network interface | |
3150 | * @netdev: network interface device structure | |
3151 | * | |
3152 | * Returns 0, this is not allowed to fail | |
3153 | * | |
3154 | * The close entry point is called when an interface is de-activated | |
3155 | * by the OS. The hardware is still under the drivers control, but | |
3156 | * needs to be disabled. A global MAC reset is issued to stop the | |
3157 | * hardware, and all transmit and receive resources are freed. | |
3158 | **/ | |
3159 | static int e1000_close(struct net_device *netdev) | |
3160 | { | |
3161 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
3162 | ||
3163 | WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); | |
3164 | e1000e_down(adapter); | |
3165 | e1000_power_down_phy(adapter); | |
3166 | e1000_free_irq(adapter); | |
3167 | ||
3168 | e1000e_free_tx_resources(adapter); | |
3169 | e1000e_free_rx_resources(adapter); | |
3170 | ||
ad68076e BA |
3171 | /* |
3172 | * kill manageability vlan ID if supported, but not if a vlan with | |
3173 | * the same ID is registered on the host OS (let 8021q kill it) | |
3174 | */ | |
bc7f75fa AK |
3175 | if ((adapter->hw.mng_cookie.status & |
3176 | E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && | |
3177 | !(adapter->vlgrp && | |
3178 | vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) | |
3179 | e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); | |
3180 | ||
ad68076e BA |
3181 | /* |
3182 | * If AMT is enabled, let the firmware know that the network | |
3183 | * interface is now closed | |
3184 | */ | |
c43bc57e | 3185 | if (adapter->flags & FLAG_HAS_AMT) |
bc7f75fa AK |
3186 | e1000_release_hw_control(adapter); |
3187 | ||
3188 | return 0; | |
3189 | } | |
3190 | /** | |
3191 | * e1000_set_mac - Change the Ethernet Address of the NIC | |
3192 | * @netdev: network interface device structure | |
3193 | * @p: pointer to an address structure | |
3194 | * | |
3195 | * Returns 0 on success, negative on failure | |
3196 | **/ | |
3197 | static int e1000_set_mac(struct net_device *netdev, void *p) | |
3198 | { | |
3199 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
3200 | struct sockaddr *addr = p; | |
3201 | ||
3202 | if (!is_valid_ether_addr(addr->sa_data)) | |
3203 | return -EADDRNOTAVAIL; | |
3204 | ||
3205 | memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | |
3206 | memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len); | |
3207 | ||
3208 | e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0); | |
3209 | ||
3210 | if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) { | |
3211 | /* activate the work around */ | |
3212 | e1000e_set_laa_state_82571(&adapter->hw, 1); | |
3213 | ||
ad68076e BA |
3214 | /* |
3215 | * Hold a copy of the LAA in RAR[14] This is done so that | |
bc7f75fa AK |
3216 | * between the time RAR[0] gets clobbered and the time it |
3217 | * gets fixed (in e1000_watchdog), the actual LAA is in one | |
3218 | * of the RARs and no incoming packets directed to this port | |
3219 | * are dropped. Eventually the LAA will be in RAR[0] and | |
ad68076e BA |
3220 | * RAR[14] |
3221 | */ | |
bc7f75fa AK |
3222 | e1000e_rar_set(&adapter->hw, |
3223 | adapter->hw.mac.addr, | |
3224 | adapter->hw.mac.rar_entry_count - 1); | |
3225 | } | |
3226 | ||
3227 | return 0; | |
3228 | } | |
3229 | ||
a8f88ff5 JB |
3230 | /** |
3231 | * e1000e_update_phy_task - work thread to update phy | |
3232 | * @work: pointer to our work struct | |
3233 | * | |
3234 | * this worker thread exists because we must acquire a | |
3235 | * semaphore to read the phy, which we could msleep while | |
3236 | * waiting for it, and we can't msleep in a timer. | |
3237 | **/ | |
3238 | static void e1000e_update_phy_task(struct work_struct *work) | |
3239 | { | |
3240 | struct e1000_adapter *adapter = container_of(work, | |
3241 | struct e1000_adapter, update_phy_task); | |
3242 | e1000_get_phy_info(&adapter->hw); | |
3243 | } | |
3244 | ||
ad68076e BA |
3245 | /* |
3246 | * Need to wait a few seconds after link up to get diagnostic information from | |
3247 | * the phy | |
3248 | */ | |
bc7f75fa AK |
3249 | static void e1000_update_phy_info(unsigned long data) |
3250 | { | |
3251 | struct e1000_adapter *adapter = (struct e1000_adapter *) data; | |
a8f88ff5 | 3252 | schedule_work(&adapter->update_phy_task); |
bc7f75fa AK |
3253 | } |
3254 | ||
3255 | /** | |
3256 | * e1000e_update_stats - Update the board statistics counters | |
3257 | * @adapter: board private structure | |
3258 | **/ | |
3259 | void e1000e_update_stats(struct e1000_adapter *adapter) | |
3260 | { | |
3261 | struct e1000_hw *hw = &adapter->hw; | |
3262 | struct pci_dev *pdev = adapter->pdev; | |
bc7f75fa AK |
3263 | |
3264 | /* | |
3265 | * Prevent stats update while adapter is being reset, or if the pci | |
3266 | * connection is down. | |
3267 | */ | |
3268 | if (adapter->link_speed == 0) | |
3269 | return; | |
3270 | if (pci_channel_offline(pdev)) | |
3271 | return; | |
3272 | ||
bc7f75fa AK |
3273 | adapter->stats.crcerrs += er32(CRCERRS); |
3274 | adapter->stats.gprc += er32(GPRC); | |
7c25769f BA |
3275 | adapter->stats.gorc += er32(GORCL); |
3276 | er32(GORCH); /* Clear gorc */ | |
bc7f75fa AK |
3277 | adapter->stats.bprc += er32(BPRC); |
3278 | adapter->stats.mprc += er32(MPRC); | |
3279 | adapter->stats.roc += er32(ROC); | |
3280 | ||
bc7f75fa AK |
3281 | adapter->stats.mpc += er32(MPC); |
3282 | adapter->stats.scc += er32(SCC); | |
3283 | adapter->stats.ecol += er32(ECOL); | |
3284 | adapter->stats.mcc += er32(MCC); | |
3285 | adapter->stats.latecol += er32(LATECOL); | |
3286 | adapter->stats.dc += er32(DC); | |
bc7f75fa AK |
3287 | adapter->stats.xonrxc += er32(XONRXC); |
3288 | adapter->stats.xontxc += er32(XONTXC); | |
3289 | adapter->stats.xoffrxc += er32(XOFFRXC); | |
3290 | adapter->stats.xofftxc += er32(XOFFTXC); | |
bc7f75fa | 3291 | adapter->stats.gptc += er32(GPTC); |
7c25769f BA |
3292 | adapter->stats.gotc += er32(GOTCL); |
3293 | er32(GOTCH); /* Clear gotc */ | |
bc7f75fa AK |
3294 | adapter->stats.rnbc += er32(RNBC); |
3295 | adapter->stats.ruc += er32(RUC); | |
bc7f75fa AK |
3296 | |
3297 | adapter->stats.mptc += er32(MPTC); | |
3298 | adapter->stats.bptc += er32(BPTC); | |
3299 | ||
3300 | /* used for adaptive IFS */ | |
3301 | ||
3302 | hw->mac.tx_packet_delta = er32(TPT); | |
3303 | adapter->stats.tpt += hw->mac.tx_packet_delta; | |
3304 | hw->mac.collision_delta = er32(COLC); | |
3305 | adapter->stats.colc += hw->mac.collision_delta; | |
3306 | ||
3307 | adapter->stats.algnerrc += er32(ALGNERRC); | |
3308 | adapter->stats.rxerrc += er32(RXERRC); | |
4662e82b BA |
3309 | if (hw->mac.type != e1000_82574) |
3310 | adapter->stats.tncrs += er32(TNCRS); | |
bc7f75fa AK |
3311 | adapter->stats.cexterr += er32(CEXTERR); |
3312 | adapter->stats.tsctc += er32(TSCTC); | |
3313 | adapter->stats.tsctfc += er32(TSCTFC); | |
3314 | ||
bc7f75fa | 3315 | /* Fill out the OS statistics structure */ |
bc7f75fa AK |
3316 | adapter->net_stats.multicast = adapter->stats.mprc; |
3317 | adapter->net_stats.collisions = adapter->stats.colc; | |
3318 | ||
3319 | /* Rx Errors */ | |
3320 | ||
ad68076e BA |
3321 | /* |
3322 | * RLEC on some newer hardware can be incorrect so build | |
3323 | * our own version based on RUC and ROC | |
3324 | */ | |
bc7f75fa AK |
3325 | adapter->net_stats.rx_errors = adapter->stats.rxerrc + |
3326 | adapter->stats.crcerrs + adapter->stats.algnerrc + | |
3327 | adapter->stats.ruc + adapter->stats.roc + | |
3328 | adapter->stats.cexterr; | |
3329 | adapter->net_stats.rx_length_errors = adapter->stats.ruc + | |
3330 | adapter->stats.roc; | |
3331 | adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; | |
3332 | adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc; | |
3333 | adapter->net_stats.rx_missed_errors = adapter->stats.mpc; | |
3334 | ||
3335 | /* Tx Errors */ | |
3336 | adapter->net_stats.tx_errors = adapter->stats.ecol + | |
3337 | adapter->stats.latecol; | |
3338 | adapter->net_stats.tx_aborted_errors = adapter->stats.ecol; | |
3339 | adapter->net_stats.tx_window_errors = adapter->stats.latecol; | |
3340 | adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs; | |
3341 | ||
3342 | /* Tx Dropped needs to be maintained elsewhere */ | |
3343 | ||
bc7f75fa AK |
3344 | /* Management Stats */ |
3345 | adapter->stats.mgptc += er32(MGTPTC); | |
3346 | adapter->stats.mgprc += er32(MGTPRC); | |
3347 | adapter->stats.mgpdc += er32(MGTPDC); | |
bc7f75fa AK |
3348 | } |
3349 | ||
7c25769f BA |
3350 | /** |
3351 | * e1000_phy_read_status - Update the PHY register status snapshot | |
3352 | * @adapter: board private structure | |
3353 | **/ | |
3354 | static void e1000_phy_read_status(struct e1000_adapter *adapter) | |
3355 | { | |
3356 | struct e1000_hw *hw = &adapter->hw; | |
3357 | struct e1000_phy_regs *phy = &adapter->phy_regs; | |
3358 | int ret_val; | |
7c25769f BA |
3359 | |
3360 | if ((er32(STATUS) & E1000_STATUS_LU) && | |
3361 | (adapter->hw.phy.media_type == e1000_media_type_copper)) { | |
3362 | ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr); | |
3363 | ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr); | |
3364 | ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise); | |
3365 | ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa); | |
3366 | ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion); | |
3367 | ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000); | |
3368 | ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000); | |
3369 | ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus); | |
3370 | if (ret_val) | |
44defeb3 | 3371 | e_warn("Error reading PHY register\n"); |
7c25769f BA |
3372 | } else { |
3373 | /* | |
3374 | * Do not read PHY registers if link is not up | |
3375 | * Set values to typical power-on defaults | |
3376 | */ | |
3377 | phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX); | |
3378 | phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL | | |
3379 | BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE | | |
3380 | BMSR_ERCAP); | |
3381 | phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP | | |
3382 | ADVERTISE_ALL | ADVERTISE_CSMA); | |
3383 | phy->lpa = 0; | |
3384 | phy->expansion = EXPANSION_ENABLENPAGE; | |
3385 | phy->ctrl1000 = ADVERTISE_1000FULL; | |
3386 | phy->stat1000 = 0; | |
3387 | phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF); | |
3388 | } | |
7c25769f BA |
3389 | } |
3390 | ||
bc7f75fa AK |
3391 | static void e1000_print_link_info(struct e1000_adapter *adapter) |
3392 | { | |
bc7f75fa AK |
3393 | struct e1000_hw *hw = &adapter->hw; |
3394 | u32 ctrl = er32(CTRL); | |
3395 | ||
44defeb3 JK |
3396 | e_info("Link is Up %d Mbps %s, Flow Control: %s\n", |
3397 | adapter->link_speed, | |
3398 | (adapter->link_duplex == FULL_DUPLEX) ? | |
3399 | "Full Duplex" : "Half Duplex", | |
3400 | ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? | |
3401 | "RX/TX" : | |
3402 | ((ctrl & E1000_CTRL_RFCE) ? "RX" : | |
3403 | ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); | |
bc7f75fa AK |
3404 | } |
3405 | ||
318a94d6 JK |
3406 | static bool e1000_has_link(struct e1000_adapter *adapter) |
3407 | { | |
3408 | struct e1000_hw *hw = &adapter->hw; | |
3409 | bool link_active = 0; | |
3410 | s32 ret_val = 0; | |
3411 | ||
3412 | /* | |
3413 | * get_link_status is set on LSC (link status) interrupt or | |
3414 | * Rx sequence error interrupt. get_link_status will stay | |
3415 | * false until the check_for_link establishes link | |
3416 | * for copper adapters ONLY | |
3417 | */ | |
3418 | switch (hw->phy.media_type) { | |
3419 | case e1000_media_type_copper: | |
3420 | if (hw->mac.get_link_status) { | |
3421 | ret_val = hw->mac.ops.check_for_link(hw); | |
3422 | link_active = !hw->mac.get_link_status; | |
3423 | } else { | |
3424 | link_active = 1; | |
3425 | } | |
3426 | break; | |
3427 | case e1000_media_type_fiber: | |
3428 | ret_val = hw->mac.ops.check_for_link(hw); | |
3429 | link_active = !!(er32(STATUS) & E1000_STATUS_LU); | |
3430 | break; | |
3431 | case e1000_media_type_internal_serdes: | |
3432 | ret_val = hw->mac.ops.check_for_link(hw); | |
3433 | link_active = adapter->hw.mac.serdes_has_link; | |
3434 | break; | |
3435 | default: | |
3436 | case e1000_media_type_unknown: | |
3437 | break; | |
3438 | } | |
3439 | ||
3440 | if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && | |
3441 | (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { | |
3442 | /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ | |
44defeb3 | 3443 | e_info("Gigabit has been disabled, downgrading speed\n"); |
318a94d6 JK |
3444 | } |
3445 | ||
3446 | return link_active; | |
3447 | } | |
3448 | ||
3449 | static void e1000e_enable_receives(struct e1000_adapter *adapter) | |
3450 | { | |
3451 | /* make sure the receive unit is started */ | |
3452 | if ((adapter->flags & FLAG_RX_NEEDS_RESTART) && | |
3453 | (adapter->flags & FLAG_RX_RESTART_NOW)) { | |
3454 | struct e1000_hw *hw = &adapter->hw; | |
3455 | u32 rctl = er32(RCTL); | |
3456 | ew32(RCTL, rctl | E1000_RCTL_EN); | |
3457 | adapter->flags &= ~FLAG_RX_RESTART_NOW; | |
3458 | } | |
3459 | } | |
3460 | ||
bc7f75fa AK |
3461 | /** |
3462 | * e1000_watchdog - Timer Call-back | |
3463 | * @data: pointer to adapter cast into an unsigned long | |
3464 | **/ | |
3465 | static void e1000_watchdog(unsigned long data) | |
3466 | { | |
3467 | struct e1000_adapter *adapter = (struct e1000_adapter *) data; | |
3468 | ||
3469 | /* Do the rest outside of interrupt context */ | |
3470 | schedule_work(&adapter->watchdog_task); | |
3471 | ||
3472 | /* TODO: make this use queue_delayed_work() */ | |
3473 | } | |
3474 | ||
3475 | static void e1000_watchdog_task(struct work_struct *work) | |
3476 | { | |
3477 | struct e1000_adapter *adapter = container_of(work, | |
3478 | struct e1000_adapter, watchdog_task); | |
bc7f75fa AK |
3479 | struct net_device *netdev = adapter->netdev; |
3480 | struct e1000_mac_info *mac = &adapter->hw.mac; | |
3481 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
3482 | struct e1000_hw *hw = &adapter->hw; | |
3483 | u32 link, tctl; | |
bc7f75fa AK |
3484 | int tx_pending = 0; |
3485 | ||
318a94d6 JK |
3486 | link = e1000_has_link(adapter); |
3487 | if ((netif_carrier_ok(netdev)) && link) { | |
3488 | e1000e_enable_receives(adapter); | |
bc7f75fa | 3489 | goto link_up; |
bc7f75fa AK |
3490 | } |
3491 | ||
3492 | if ((e1000e_enable_tx_pkt_filtering(hw)) && | |
3493 | (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)) | |
3494 | e1000_update_mng_vlan(adapter); | |
3495 | ||
bc7f75fa AK |
3496 | if (link) { |
3497 | if (!netif_carrier_ok(netdev)) { | |
3498 | bool txb2b = 1; | |
318a94d6 | 3499 | /* update snapshot of PHY registers on LSC */ |
7c25769f | 3500 | e1000_phy_read_status(adapter); |
bc7f75fa AK |
3501 | mac->ops.get_link_up_info(&adapter->hw, |
3502 | &adapter->link_speed, | |
3503 | &adapter->link_duplex); | |
3504 | e1000_print_link_info(adapter); | |
f4187b56 BA |
3505 | /* |
3506 | * On supported PHYs, check for duplex mismatch only | |
3507 | * if link has autonegotiated at 10/100 half | |
3508 | */ | |
3509 | if ((hw->phy.type == e1000_phy_igp_3 || | |
3510 | hw->phy.type == e1000_phy_bm) && | |
3511 | (hw->mac.autoneg == true) && | |
3512 | (adapter->link_speed == SPEED_10 || | |
3513 | adapter->link_speed == SPEED_100) && | |
3514 | (adapter->link_duplex == HALF_DUPLEX)) { | |
3515 | u16 autoneg_exp; | |
3516 | ||
3517 | e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp); | |
3518 | ||
3519 | if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS)) | |
3520 | e_info("Autonegotiated half duplex but" | |
3521 | " link partner cannot autoneg. " | |
3522 | " Try forcing full duplex if " | |
3523 | "link gets many collisions.\n"); | |
3524 | } | |
3525 | ||
ad68076e BA |
3526 | /* |
3527 | * tweak tx_queue_len according to speed/duplex | |
3528 | * and adjust the timeout factor | |
3529 | */ | |
bc7f75fa AK |
3530 | netdev->tx_queue_len = adapter->tx_queue_len; |
3531 | adapter->tx_timeout_factor = 1; | |
3532 | switch (adapter->link_speed) { | |
3533 | case SPEED_10: | |
3534 | txb2b = 0; | |
3535 | netdev->tx_queue_len = 10; | |
10f1b492 | 3536 | adapter->tx_timeout_factor = 16; |
bc7f75fa AK |
3537 | break; |
3538 | case SPEED_100: | |
3539 | txb2b = 0; | |
3540 | netdev->tx_queue_len = 100; | |
3541 | /* maybe add some timeout factor ? */ | |
3542 | break; | |
3543 | } | |
3544 | ||
ad68076e BA |
3545 | /* |
3546 | * workaround: re-program speed mode bit after | |
3547 | * link-up event | |
3548 | */ | |
bc7f75fa AK |
3549 | if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) && |
3550 | !txb2b) { | |
3551 | u32 tarc0; | |
e9ec2c0f | 3552 | tarc0 = er32(TARC(0)); |
bc7f75fa | 3553 | tarc0 &= ~SPEED_MODE_BIT; |
e9ec2c0f | 3554 | ew32(TARC(0), tarc0); |
bc7f75fa AK |
3555 | } |
3556 | ||
ad68076e BA |
3557 | /* |
3558 | * disable TSO for pcie and 10/100 speeds, to avoid | |
3559 | * some hardware issues | |
3560 | */ | |
bc7f75fa AK |
3561 | if (!(adapter->flags & FLAG_TSO_FORCE)) { |
3562 | switch (adapter->link_speed) { | |
3563 | case SPEED_10: | |
3564 | case SPEED_100: | |
44defeb3 | 3565 | e_info("10/100 speed: disabling TSO\n"); |
bc7f75fa AK |
3566 | netdev->features &= ~NETIF_F_TSO; |
3567 | netdev->features &= ~NETIF_F_TSO6; | |
3568 | break; | |
3569 | case SPEED_1000: | |
3570 | netdev->features |= NETIF_F_TSO; | |
3571 | netdev->features |= NETIF_F_TSO6; | |
3572 | break; | |
3573 | default: | |
3574 | /* oops */ | |
3575 | break; | |
3576 | } | |
3577 | } | |
3578 | ||
ad68076e BA |
3579 | /* |
3580 | * enable transmits in the hardware, need to do this | |
3581 | * after setting TARC(0) | |
3582 | */ | |
bc7f75fa AK |
3583 | tctl = er32(TCTL); |
3584 | tctl |= E1000_TCTL_EN; | |
3585 | ew32(TCTL, tctl); | |
3586 | ||
3587 | netif_carrier_on(netdev); | |
d55b53ff | 3588 | netif_tx_wake_all_queues(netdev); |
bc7f75fa AK |
3589 | |
3590 | if (!test_bit(__E1000_DOWN, &adapter->state)) | |
3591 | mod_timer(&adapter->phy_info_timer, | |
3592 | round_jiffies(jiffies + 2 * HZ)); | |
bc7f75fa AK |
3593 | } |
3594 | } else { | |
3595 | if (netif_carrier_ok(netdev)) { | |
3596 | adapter->link_speed = 0; | |
3597 | adapter->link_duplex = 0; | |
44defeb3 | 3598 | e_info("Link is Down\n"); |
bc7f75fa | 3599 | netif_carrier_off(netdev); |
d55b53ff | 3600 | netif_tx_stop_all_queues(netdev); |
bc7f75fa AK |
3601 | if (!test_bit(__E1000_DOWN, &adapter->state)) |
3602 | mod_timer(&adapter->phy_info_timer, | |
3603 | round_jiffies(jiffies + 2 * HZ)); | |
3604 | ||
3605 | if (adapter->flags & FLAG_RX_NEEDS_RESTART) | |
3606 | schedule_work(&adapter->reset_task); | |
3607 | } | |
3608 | } | |
3609 | ||
3610 | link_up: | |
3611 | e1000e_update_stats(adapter); | |
3612 | ||
3613 | mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old; | |
3614 | adapter->tpt_old = adapter->stats.tpt; | |
3615 | mac->collision_delta = adapter->stats.colc - adapter->colc_old; | |
3616 | adapter->colc_old = adapter->stats.colc; | |
3617 | ||
7c25769f BA |
3618 | adapter->gorc = adapter->stats.gorc - adapter->gorc_old; |
3619 | adapter->gorc_old = adapter->stats.gorc; | |
3620 | adapter->gotc = adapter->stats.gotc - adapter->gotc_old; | |
3621 | adapter->gotc_old = adapter->stats.gotc; | |
bc7f75fa AK |
3622 | |
3623 | e1000e_update_adaptive(&adapter->hw); | |
3624 | ||
3625 | if (!netif_carrier_ok(netdev)) { | |
3626 | tx_pending = (e1000_desc_unused(tx_ring) + 1 < | |
3627 | tx_ring->count); | |
3628 | if (tx_pending) { | |
ad68076e BA |
3629 | /* |
3630 | * We've lost link, so the controller stops DMA, | |
bc7f75fa AK |
3631 | * but we've got queued Tx work that's never going |
3632 | * to get done, so reset controller to flush Tx. | |
ad68076e BA |
3633 | * (Do the reset outside of interrupt context). |
3634 | */ | |
bc7f75fa AK |
3635 | adapter->tx_timeout_count++; |
3636 | schedule_work(&adapter->reset_task); | |
3637 | } | |
3638 | } | |
3639 | ||
ad68076e | 3640 | /* Cause software interrupt to ensure Rx ring is cleaned */ |
4662e82b BA |
3641 | if (adapter->msix_entries) |
3642 | ew32(ICS, adapter->rx_ring->ims_val); | |
3643 | else | |
3644 | ew32(ICS, E1000_ICS_RXDMT0); | |
bc7f75fa AK |
3645 | |
3646 | /* Force detection of hung controller every watchdog period */ | |
3647 | adapter->detect_tx_hung = 1; | |
3648 | ||
ad68076e BA |
3649 | /* |
3650 | * With 82571 controllers, LAA may be overwritten due to controller | |
3651 | * reset from the other port. Set the appropriate LAA in RAR[0] | |
3652 | */ | |
bc7f75fa AK |
3653 | if (e1000e_get_laa_state_82571(hw)) |
3654 | e1000e_rar_set(hw, adapter->hw.mac.addr, 0); | |
3655 | ||
3656 | /* Reset the timer */ | |
3657 | if (!test_bit(__E1000_DOWN, &adapter->state)) | |
3658 | mod_timer(&adapter->watchdog_timer, | |
3659 | round_jiffies(jiffies + 2 * HZ)); | |
3660 | } | |
3661 | ||
3662 | #define E1000_TX_FLAGS_CSUM 0x00000001 | |
3663 | #define E1000_TX_FLAGS_VLAN 0x00000002 | |
3664 | #define E1000_TX_FLAGS_TSO 0x00000004 | |
3665 | #define E1000_TX_FLAGS_IPV4 0x00000008 | |
3666 | #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 | |
3667 | #define E1000_TX_FLAGS_VLAN_SHIFT 16 | |
3668 | ||
3669 | static int e1000_tso(struct e1000_adapter *adapter, | |
3670 | struct sk_buff *skb) | |
3671 | { | |
3672 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
3673 | struct e1000_context_desc *context_desc; | |
3674 | struct e1000_buffer *buffer_info; | |
3675 | unsigned int i; | |
3676 | u32 cmd_length = 0; | |
3677 | u16 ipcse = 0, tucse, mss; | |
3678 | u8 ipcss, ipcso, tucss, tucso, hdr_len; | |
3679 | int err; | |
3680 | ||
3681 | if (skb_is_gso(skb)) { | |
3682 | if (skb_header_cloned(skb)) { | |
3683 | err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); | |
3684 | if (err) | |
3685 | return err; | |
3686 | } | |
3687 | ||
3688 | hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); | |
3689 | mss = skb_shinfo(skb)->gso_size; | |
3690 | if (skb->protocol == htons(ETH_P_IP)) { | |
3691 | struct iphdr *iph = ip_hdr(skb); | |
3692 | iph->tot_len = 0; | |
3693 | iph->check = 0; | |
3694 | tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, | |
3695 | iph->daddr, 0, | |
3696 | IPPROTO_TCP, | |
3697 | 0); | |
3698 | cmd_length = E1000_TXD_CMD_IP; | |
3699 | ipcse = skb_transport_offset(skb) - 1; | |
3700 | } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { | |
3701 | ipv6_hdr(skb)->payload_len = 0; | |
3702 | tcp_hdr(skb)->check = | |
3703 | ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, | |
3704 | &ipv6_hdr(skb)->daddr, | |
3705 | 0, IPPROTO_TCP, 0); | |
3706 | ipcse = 0; | |
3707 | } | |
3708 | ipcss = skb_network_offset(skb); | |
3709 | ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data; | |
3710 | tucss = skb_transport_offset(skb); | |
3711 | tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data; | |
3712 | tucse = 0; | |
3713 | ||
3714 | cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | | |
3715 | E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); | |
3716 | ||
3717 | i = tx_ring->next_to_use; | |
3718 | context_desc = E1000_CONTEXT_DESC(*tx_ring, i); | |
3719 | buffer_info = &tx_ring->buffer_info[i]; | |
3720 | ||
3721 | context_desc->lower_setup.ip_fields.ipcss = ipcss; | |
3722 | context_desc->lower_setup.ip_fields.ipcso = ipcso; | |
3723 | context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse); | |
3724 | context_desc->upper_setup.tcp_fields.tucss = tucss; | |
3725 | context_desc->upper_setup.tcp_fields.tucso = tucso; | |
3726 | context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse); | |
3727 | context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss); | |
3728 | context_desc->tcp_seg_setup.fields.hdr_len = hdr_len; | |
3729 | context_desc->cmd_and_length = cpu_to_le32(cmd_length); | |
3730 | ||
3731 | buffer_info->time_stamp = jiffies; | |
3732 | buffer_info->next_to_watch = i; | |
3733 | ||
3734 | i++; | |
3735 | if (i == tx_ring->count) | |
3736 | i = 0; | |
3737 | tx_ring->next_to_use = i; | |
3738 | ||
3739 | return 1; | |
3740 | } | |
3741 | ||
3742 | return 0; | |
3743 | } | |
3744 | ||
3745 | static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) | |
3746 | { | |
3747 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
3748 | struct e1000_context_desc *context_desc; | |
3749 | struct e1000_buffer *buffer_info; | |
3750 | unsigned int i; | |
3751 | u8 css; | |
af807c82 | 3752 | u32 cmd_len = E1000_TXD_CMD_DEXT; |
bc7f75fa | 3753 | |
af807c82 DG |
3754 | if (skb->ip_summed != CHECKSUM_PARTIAL) |
3755 | return 0; | |
bc7f75fa | 3756 | |
af807c82 DG |
3757 | switch (skb->protocol) { |
3758 | case __constant_htons(ETH_P_IP): | |
3759 | if (ip_hdr(skb)->protocol == IPPROTO_TCP) | |
3760 | cmd_len |= E1000_TXD_CMD_TCP; | |
3761 | break; | |
3762 | case __constant_htons(ETH_P_IPV6): | |
3763 | /* XXX not handling all IPV6 headers */ | |
3764 | if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) | |
3765 | cmd_len |= E1000_TXD_CMD_TCP; | |
3766 | break; | |
3767 | default: | |
3768 | if (unlikely(net_ratelimit())) | |
3769 | e_warn("checksum_partial proto=%x!\n", skb->protocol); | |
3770 | break; | |
bc7f75fa AK |
3771 | } |
3772 | ||
af807c82 DG |
3773 | css = skb_transport_offset(skb); |
3774 | ||
3775 | i = tx_ring->next_to_use; | |
3776 | buffer_info = &tx_ring->buffer_info[i]; | |
3777 | context_desc = E1000_CONTEXT_DESC(*tx_ring, i); | |
3778 | ||
3779 | context_desc->lower_setup.ip_config = 0; | |
3780 | context_desc->upper_setup.tcp_fields.tucss = css; | |
3781 | context_desc->upper_setup.tcp_fields.tucso = | |
3782 | css + skb->csum_offset; | |
3783 | context_desc->upper_setup.tcp_fields.tucse = 0; | |
3784 | context_desc->tcp_seg_setup.data = 0; | |
3785 | context_desc->cmd_and_length = cpu_to_le32(cmd_len); | |
3786 | ||
3787 | buffer_info->time_stamp = jiffies; | |
3788 | buffer_info->next_to_watch = i; | |
3789 | ||
3790 | i++; | |
3791 | if (i == tx_ring->count) | |
3792 | i = 0; | |
3793 | tx_ring->next_to_use = i; | |
3794 | ||
3795 | return 1; | |
bc7f75fa AK |
3796 | } |
3797 | ||
3798 | #define E1000_MAX_PER_TXD 8192 | |
3799 | #define E1000_MAX_TXD_PWR 12 | |
3800 | ||
3801 | static int e1000_tx_map(struct e1000_adapter *adapter, | |
3802 | struct sk_buff *skb, unsigned int first, | |
3803 | unsigned int max_per_txd, unsigned int nr_frags, | |
3804 | unsigned int mss) | |
3805 | { | |
3806 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
3807 | struct e1000_buffer *buffer_info; | |
3808 | unsigned int len = skb->len - skb->data_len; | |
3809 | unsigned int offset = 0, size, count = 0, i; | |
3810 | unsigned int f; | |
3811 | ||
3812 | i = tx_ring->next_to_use; | |
3813 | ||
3814 | while (len) { | |
3815 | buffer_info = &tx_ring->buffer_info[i]; | |
3816 | size = min(len, max_per_txd); | |
3817 | ||
3818 | /* Workaround for premature desc write-backs | |
3819 | * in TSO mode. Append 4-byte sentinel desc */ | |
3820 | if (mss && !nr_frags && size == len && size > 8) | |
3821 | size -= 4; | |
3822 | ||
3823 | buffer_info->length = size; | |
3824 | /* set time_stamp *before* dma to help avoid a possible race */ | |
3825 | buffer_info->time_stamp = jiffies; | |
3826 | buffer_info->dma = | |
3827 | pci_map_single(adapter->pdev, | |
3828 | skb->data + offset, | |
3829 | size, | |
3830 | PCI_DMA_TODEVICE); | |
8d8bb39b | 3831 | if (pci_dma_mapping_error(adapter->pdev, buffer_info->dma)) { |
bc7f75fa AK |
3832 | dev_err(&adapter->pdev->dev, "TX DMA map failed\n"); |
3833 | adapter->tx_dma_failed++; | |
3834 | return -1; | |
3835 | } | |
3836 | buffer_info->next_to_watch = i; | |
3837 | ||
3838 | len -= size; | |
3839 | offset += size; | |
3840 | count++; | |
3841 | i++; | |
3842 | if (i == tx_ring->count) | |
3843 | i = 0; | |
3844 | } | |
3845 | ||
3846 | for (f = 0; f < nr_frags; f++) { | |
3847 | struct skb_frag_struct *frag; | |
3848 | ||
3849 | frag = &skb_shinfo(skb)->frags[f]; | |
3850 | len = frag->size; | |
3851 | offset = frag->page_offset; | |
3852 | ||
3853 | while (len) { | |
3854 | buffer_info = &tx_ring->buffer_info[i]; | |
3855 | size = min(len, max_per_txd); | |
3856 | /* Workaround for premature desc write-backs | |
3857 | * in TSO mode. Append 4-byte sentinel desc */ | |
3858 | if (mss && f == (nr_frags-1) && size == len && size > 8) | |
3859 | size -= 4; | |
3860 | ||
3861 | buffer_info->length = size; | |
3862 | buffer_info->time_stamp = jiffies; | |
3863 | buffer_info->dma = | |
3864 | pci_map_page(adapter->pdev, | |
3865 | frag->page, | |
3866 | offset, | |
3867 | size, | |
3868 | PCI_DMA_TODEVICE); | |
8d8bb39b FT |
3869 | if (pci_dma_mapping_error(adapter->pdev, |
3870 | buffer_info->dma)) { | |
bc7f75fa AK |
3871 | dev_err(&adapter->pdev->dev, |
3872 | "TX DMA page map failed\n"); | |
3873 | adapter->tx_dma_failed++; | |
3874 | return -1; | |
3875 | } | |
3876 | ||
3877 | buffer_info->next_to_watch = i; | |
3878 | ||
3879 | len -= size; | |
3880 | offset += size; | |
3881 | count++; | |
3882 | ||
3883 | i++; | |
3884 | if (i == tx_ring->count) | |
3885 | i = 0; | |
3886 | } | |
3887 | } | |
3888 | ||
3889 | if (i == 0) | |
3890 | i = tx_ring->count - 1; | |
3891 | else | |
3892 | i--; | |
3893 | ||
3894 | tx_ring->buffer_info[i].skb = skb; | |
3895 | tx_ring->buffer_info[first].next_to_watch = i; | |
3896 | ||
3897 | return count; | |
3898 | } | |
3899 | ||
3900 | static void e1000_tx_queue(struct e1000_adapter *adapter, | |
3901 | int tx_flags, int count) | |
3902 | { | |
3903 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
3904 | struct e1000_tx_desc *tx_desc = NULL; | |
3905 | struct e1000_buffer *buffer_info; | |
3906 | u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS; | |
3907 | unsigned int i; | |
3908 | ||
3909 | if (tx_flags & E1000_TX_FLAGS_TSO) { | |
3910 | txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D | | |
3911 | E1000_TXD_CMD_TSE; | |
3912 | txd_upper |= E1000_TXD_POPTS_TXSM << 8; | |
3913 | ||
3914 | if (tx_flags & E1000_TX_FLAGS_IPV4) | |
3915 | txd_upper |= E1000_TXD_POPTS_IXSM << 8; | |
3916 | } | |
3917 | ||
3918 | if (tx_flags & E1000_TX_FLAGS_CSUM) { | |
3919 | txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; | |
3920 | txd_upper |= E1000_TXD_POPTS_TXSM << 8; | |
3921 | } | |
3922 | ||
3923 | if (tx_flags & E1000_TX_FLAGS_VLAN) { | |
3924 | txd_lower |= E1000_TXD_CMD_VLE; | |
3925 | txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK); | |
3926 | } | |
3927 | ||
3928 | i = tx_ring->next_to_use; | |
3929 | ||
3930 | while (count--) { | |
3931 | buffer_info = &tx_ring->buffer_info[i]; | |
3932 | tx_desc = E1000_TX_DESC(*tx_ring, i); | |
3933 | tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); | |
3934 | tx_desc->lower.data = | |
3935 | cpu_to_le32(txd_lower | buffer_info->length); | |
3936 | tx_desc->upper.data = cpu_to_le32(txd_upper); | |
3937 | ||
3938 | i++; | |
3939 | if (i == tx_ring->count) | |
3940 | i = 0; | |
3941 | } | |
3942 | ||
3943 | tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd); | |
3944 | ||
ad68076e BA |
3945 | /* |
3946 | * Force memory writes to complete before letting h/w | |
bc7f75fa AK |
3947 | * know there are new descriptors to fetch. (Only |
3948 | * applicable for weak-ordered memory model archs, | |
ad68076e BA |
3949 | * such as IA-64). |
3950 | */ | |
bc7f75fa AK |
3951 | wmb(); |
3952 | ||
3953 | tx_ring->next_to_use = i; | |
3954 | writel(i, adapter->hw.hw_addr + tx_ring->tail); | |
ad68076e BA |
3955 | /* |
3956 | * we need this if more than one processor can write to our tail | |
3957 | * at a time, it synchronizes IO on IA64/Altix systems | |
3958 | */ | |
bc7f75fa AK |
3959 | mmiowb(); |
3960 | } | |
3961 | ||
3962 | #define MINIMUM_DHCP_PACKET_SIZE 282 | |
3963 | static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, | |
3964 | struct sk_buff *skb) | |
3965 | { | |
3966 | struct e1000_hw *hw = &adapter->hw; | |
3967 | u16 length, offset; | |
3968 | ||
3969 | if (vlan_tx_tag_present(skb)) { | |
3970 | if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) | |
3971 | && (adapter->hw.mng_cookie.status & | |
3972 | E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) | |
3973 | return 0; | |
3974 | } | |
3975 | ||
3976 | if (skb->len <= MINIMUM_DHCP_PACKET_SIZE) | |
3977 | return 0; | |
3978 | ||
3979 | if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP)) | |
3980 | return 0; | |
3981 | ||
3982 | { | |
3983 | const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14); | |
3984 | struct udphdr *udp; | |
3985 | ||
3986 | if (ip->protocol != IPPROTO_UDP) | |
3987 | return 0; | |
3988 | ||
3989 | udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2)); | |
3990 | if (ntohs(udp->dest) != 67) | |
3991 | return 0; | |
3992 | ||
3993 | offset = (u8 *)udp + 8 - skb->data; | |
3994 | length = skb->len - offset; | |
3995 | return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length); | |
3996 | } | |
3997 | ||
3998 | return 0; | |
3999 | } | |
4000 | ||
4001 | static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) | |
4002 | { | |
4003 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4004 | ||
4005 | netif_stop_queue(netdev); | |
ad68076e BA |
4006 | /* |
4007 | * Herbert's original patch had: | |
bc7f75fa | 4008 | * smp_mb__after_netif_stop_queue(); |
ad68076e BA |
4009 | * but since that doesn't exist yet, just open code it. |
4010 | */ | |
bc7f75fa AK |
4011 | smp_mb(); |
4012 | ||
ad68076e BA |
4013 | /* |
4014 | * We need to check again in a case another CPU has just | |
4015 | * made room available. | |
4016 | */ | |
bc7f75fa AK |
4017 | if (e1000_desc_unused(adapter->tx_ring) < size) |
4018 | return -EBUSY; | |
4019 | ||
4020 | /* A reprieve! */ | |
4021 | netif_start_queue(netdev); | |
4022 | ++adapter->restart_queue; | |
4023 | return 0; | |
4024 | } | |
4025 | ||
4026 | static int e1000_maybe_stop_tx(struct net_device *netdev, int size) | |
4027 | { | |
4028 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4029 | ||
4030 | if (e1000_desc_unused(adapter->tx_ring) >= size) | |
4031 | return 0; | |
4032 | return __e1000_maybe_stop_tx(netdev, size); | |
4033 | } | |
4034 | ||
4035 | #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 ) | |
4036 | static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) | |
4037 | { | |
4038 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4039 | struct e1000_ring *tx_ring = adapter->tx_ring; | |
4040 | unsigned int first; | |
4041 | unsigned int max_per_txd = E1000_MAX_PER_TXD; | |
4042 | unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; | |
4043 | unsigned int tx_flags = 0; | |
4e6c709c | 4044 | unsigned int len = skb->len - skb->data_len; |
bc7f75fa | 4045 | unsigned long irq_flags; |
4e6c709c AK |
4046 | unsigned int nr_frags; |
4047 | unsigned int mss; | |
bc7f75fa AK |
4048 | int count = 0; |
4049 | int tso; | |
4050 | unsigned int f; | |
bc7f75fa AK |
4051 | |
4052 | if (test_bit(__E1000_DOWN, &adapter->state)) { | |
4053 | dev_kfree_skb_any(skb); | |
4054 | return NETDEV_TX_OK; | |
4055 | } | |
4056 | ||
4057 | if (skb->len <= 0) { | |
4058 | dev_kfree_skb_any(skb); | |
4059 | return NETDEV_TX_OK; | |
4060 | } | |
4061 | ||
4062 | mss = skb_shinfo(skb)->gso_size; | |
ad68076e BA |
4063 | /* |
4064 | * The controller does a simple calculation to | |
bc7f75fa AK |
4065 | * make sure there is enough room in the FIFO before |
4066 | * initiating the DMA for each buffer. The calc is: | |
4067 | * 4 = ceil(buffer len/mss). To make sure we don't | |
4068 | * overrun the FIFO, adjust the max buffer len if mss | |
ad68076e BA |
4069 | * drops. |
4070 | */ | |
bc7f75fa AK |
4071 | if (mss) { |
4072 | u8 hdr_len; | |
4073 | max_per_txd = min(mss << 2, max_per_txd); | |
4074 | max_txd_pwr = fls(max_per_txd) - 1; | |
4075 | ||
ad68076e BA |
4076 | /* |
4077 | * TSO Workaround for 82571/2/3 Controllers -- if skb->data | |
4078 | * points to just header, pull a few bytes of payload from | |
4079 | * frags into skb->data | |
4080 | */ | |
bc7f75fa | 4081 | hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
ad68076e BA |
4082 | /* |
4083 | * we do this workaround for ES2LAN, but it is un-necessary, | |
4084 | * avoiding it could save a lot of cycles | |
4085 | */ | |
4e6c709c | 4086 | if (skb->data_len && (hdr_len == len)) { |
bc7f75fa AK |
4087 | unsigned int pull_size; |
4088 | ||
4089 | pull_size = min((unsigned int)4, skb->data_len); | |
4090 | if (!__pskb_pull_tail(skb, pull_size)) { | |
44defeb3 | 4091 | e_err("__pskb_pull_tail failed.\n"); |
bc7f75fa AK |
4092 | dev_kfree_skb_any(skb); |
4093 | return NETDEV_TX_OK; | |
4094 | } | |
4095 | len = skb->len - skb->data_len; | |
4096 | } | |
4097 | } | |
4098 | ||
4099 | /* reserve a descriptor for the offload context */ | |
4100 | if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) | |
4101 | count++; | |
4102 | count++; | |
4103 | ||
4104 | count += TXD_USE_COUNT(len, max_txd_pwr); | |
4105 | ||
4106 | nr_frags = skb_shinfo(skb)->nr_frags; | |
4107 | for (f = 0; f < nr_frags; f++) | |
4108 | count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size, | |
4109 | max_txd_pwr); | |
4110 | ||
4111 | if (adapter->hw.mac.tx_pkt_filtering) | |
4112 | e1000_transfer_dhcp_info(adapter, skb); | |
4113 | ||
4114 | if (!spin_trylock_irqsave(&adapter->tx_queue_lock, irq_flags)) | |
4115 | /* Collision - tell upper layer to requeue */ | |
4116 | return NETDEV_TX_LOCKED; | |
4117 | ||
ad68076e BA |
4118 | /* |
4119 | * need: count + 2 desc gap to keep tail from touching | |
4120 | * head, otherwise try next time | |
4121 | */ | |
bc7f75fa AK |
4122 | if (e1000_maybe_stop_tx(netdev, count + 2)) { |
4123 | spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); | |
4124 | return NETDEV_TX_BUSY; | |
4125 | } | |
4126 | ||
4127 | if (adapter->vlgrp && vlan_tx_tag_present(skb)) { | |
4128 | tx_flags |= E1000_TX_FLAGS_VLAN; | |
4129 | tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT); | |
4130 | } | |
4131 | ||
4132 | first = tx_ring->next_to_use; | |
4133 | ||
4134 | tso = e1000_tso(adapter, skb); | |
4135 | if (tso < 0) { | |
4136 | dev_kfree_skb_any(skb); | |
4137 | spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); | |
4138 | return NETDEV_TX_OK; | |
4139 | } | |
4140 | ||
4141 | if (tso) | |
4142 | tx_flags |= E1000_TX_FLAGS_TSO; | |
4143 | else if (e1000_tx_csum(adapter, skb)) | |
4144 | tx_flags |= E1000_TX_FLAGS_CSUM; | |
4145 | ||
ad68076e BA |
4146 | /* |
4147 | * Old method was to assume IPv4 packet by default if TSO was enabled. | |
bc7f75fa | 4148 | * 82571 hardware supports TSO capabilities for IPv6 as well... |
ad68076e BA |
4149 | * no longer assume, we must. |
4150 | */ | |
bc7f75fa AK |
4151 | if (skb->protocol == htons(ETH_P_IP)) |
4152 | tx_flags |= E1000_TX_FLAGS_IPV4; | |
4153 | ||
4154 | count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss); | |
4155 | if (count < 0) { | |
4156 | /* handle pci_map_single() error in e1000_tx_map */ | |
4157 | dev_kfree_skb_any(skb); | |
4158 | spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); | |
7b5dfe1a | 4159 | return NETDEV_TX_OK; |
bc7f75fa AK |
4160 | } |
4161 | ||
4162 | e1000_tx_queue(adapter, tx_flags, count); | |
4163 | ||
4164 | netdev->trans_start = jiffies; | |
4165 | ||
4166 | /* Make sure there is space in the ring for the next send. */ | |
4167 | e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2); | |
4168 | ||
4169 | spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); | |
4170 | return NETDEV_TX_OK; | |
4171 | } | |
4172 | ||
4173 | /** | |
4174 | * e1000_tx_timeout - Respond to a Tx Hang | |
4175 | * @netdev: network interface device structure | |
4176 | **/ | |
4177 | static void e1000_tx_timeout(struct net_device *netdev) | |
4178 | { | |
4179 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4180 | ||
4181 | /* Do the reset outside of interrupt context */ | |
4182 | adapter->tx_timeout_count++; | |
4183 | schedule_work(&adapter->reset_task); | |
4184 | } | |
4185 | ||
4186 | static void e1000_reset_task(struct work_struct *work) | |
4187 | { | |
4188 | struct e1000_adapter *adapter; | |
4189 | adapter = container_of(work, struct e1000_adapter, reset_task); | |
4190 | ||
4191 | e1000e_reinit_locked(adapter); | |
4192 | } | |
4193 | ||
4194 | /** | |
4195 | * e1000_get_stats - Get System Network Statistics | |
4196 | * @netdev: network interface device structure | |
4197 | * | |
4198 | * Returns the address of the device statistics structure. | |
4199 | * The statistics are actually updated from the timer callback. | |
4200 | **/ | |
4201 | static struct net_device_stats *e1000_get_stats(struct net_device *netdev) | |
4202 | { | |
4203 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4204 | ||
4205 | /* only return the current stats */ | |
4206 | return &adapter->net_stats; | |
4207 | } | |
4208 | ||
4209 | /** | |
4210 | * e1000_change_mtu - Change the Maximum Transfer Unit | |
4211 | * @netdev: network interface device structure | |
4212 | * @new_mtu: new value for maximum frame size | |
4213 | * | |
4214 | * Returns 0 on success, negative on failure | |
4215 | **/ | |
4216 | static int e1000_change_mtu(struct net_device *netdev, int new_mtu) | |
4217 | { | |
4218 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4219 | int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; | |
4220 | ||
d53f706d | 4221 | if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) || |
bc7f75fa | 4222 | (max_frame > MAX_JUMBO_FRAME_SIZE)) { |
44defeb3 | 4223 | e_err("Invalid MTU setting\n"); |
bc7f75fa AK |
4224 | return -EINVAL; |
4225 | } | |
4226 | ||
4227 | /* Jumbo frame size limits */ | |
4228 | if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) { | |
4229 | if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { | |
44defeb3 | 4230 | e_err("Jumbo Frames not supported.\n"); |
bc7f75fa AK |
4231 | return -EINVAL; |
4232 | } | |
4233 | if (adapter->hw.phy.type == e1000_phy_ife) { | |
44defeb3 | 4234 | e_err("Jumbo Frames not supported.\n"); |
bc7f75fa AK |
4235 | return -EINVAL; |
4236 | } | |
4237 | } | |
4238 | ||
4239 | #define MAX_STD_JUMBO_FRAME_SIZE 9234 | |
4240 | if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { | |
44defeb3 | 4241 | e_err("MTU > 9216 not supported.\n"); |
bc7f75fa AK |
4242 | return -EINVAL; |
4243 | } | |
4244 | ||
4245 | while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) | |
4246 | msleep(1); | |
4247 | /* e1000e_down has a dependency on max_frame_size */ | |
318a94d6 | 4248 | adapter->max_frame_size = max_frame; |
bc7f75fa AK |
4249 | if (netif_running(netdev)) |
4250 | e1000e_down(adapter); | |
4251 | ||
ad68076e BA |
4252 | /* |
4253 | * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN | |
bc7f75fa AK |
4254 | * means we reserve 2 more, this pushes us to allocate from the next |
4255 | * larger slab size. | |
ad68076e | 4256 | * i.e. RXBUFFER_2048 --> size-4096 slab |
97ac8cae BA |
4257 | * However with the new *_jumbo_rx* routines, jumbo receives will use |
4258 | * fragmented skbs | |
ad68076e | 4259 | */ |
bc7f75fa AK |
4260 | |
4261 | if (max_frame <= 256) | |
4262 | adapter->rx_buffer_len = 256; | |
4263 | else if (max_frame <= 512) | |
4264 | adapter->rx_buffer_len = 512; | |
4265 | else if (max_frame <= 1024) | |
4266 | adapter->rx_buffer_len = 1024; | |
4267 | else if (max_frame <= 2048) | |
4268 | adapter->rx_buffer_len = 2048; | |
4269 | else | |
4270 | adapter->rx_buffer_len = 4096; | |
4271 | ||
4272 | /* adjust allocation if LPE protects us, and we aren't using SBP */ | |
4273 | if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || | |
4274 | (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) | |
4275 | adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN | |
ad68076e | 4276 | + ETH_FCS_LEN; |
bc7f75fa | 4277 | |
44defeb3 | 4278 | e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); |
bc7f75fa AK |
4279 | netdev->mtu = new_mtu; |
4280 | ||
4281 | if (netif_running(netdev)) | |
4282 | e1000e_up(adapter); | |
4283 | else | |
4284 | e1000e_reset(adapter); | |
4285 | ||
4286 | clear_bit(__E1000_RESETTING, &adapter->state); | |
4287 | ||
4288 | return 0; | |
4289 | } | |
4290 | ||
4291 | static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, | |
4292 | int cmd) | |
4293 | { | |
4294 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4295 | struct mii_ioctl_data *data = if_mii(ifr); | |
bc7f75fa | 4296 | |
318a94d6 | 4297 | if (adapter->hw.phy.media_type != e1000_media_type_copper) |
bc7f75fa AK |
4298 | return -EOPNOTSUPP; |
4299 | ||
4300 | switch (cmd) { | |
4301 | case SIOCGMIIPHY: | |
4302 | data->phy_id = adapter->hw.phy.addr; | |
4303 | break; | |
4304 | case SIOCGMIIREG: | |
4305 | if (!capable(CAP_NET_ADMIN)) | |
4306 | return -EPERM; | |
7c25769f BA |
4307 | switch (data->reg_num & 0x1F) { |
4308 | case MII_BMCR: | |
4309 | data->val_out = adapter->phy_regs.bmcr; | |
4310 | break; | |
4311 | case MII_BMSR: | |
4312 | data->val_out = adapter->phy_regs.bmsr; | |
4313 | break; | |
4314 | case MII_PHYSID1: | |
4315 | data->val_out = (adapter->hw.phy.id >> 16); | |
4316 | break; | |
4317 | case MII_PHYSID2: | |
4318 | data->val_out = (adapter->hw.phy.id & 0xFFFF); | |
4319 | break; | |
4320 | case MII_ADVERTISE: | |
4321 | data->val_out = adapter->phy_regs.advertise; | |
4322 | break; | |
4323 | case MII_LPA: | |
4324 | data->val_out = adapter->phy_regs.lpa; | |
4325 | break; | |
4326 | case MII_EXPANSION: | |
4327 | data->val_out = adapter->phy_regs.expansion; | |
4328 | break; | |
4329 | case MII_CTRL1000: | |
4330 | data->val_out = adapter->phy_regs.ctrl1000; | |
4331 | break; | |
4332 | case MII_STAT1000: | |
4333 | data->val_out = adapter->phy_regs.stat1000; | |
4334 | break; | |
4335 | case MII_ESTATUS: | |
4336 | data->val_out = adapter->phy_regs.estatus; | |
4337 | break; | |
4338 | default: | |
bc7f75fa AK |
4339 | return -EIO; |
4340 | } | |
bc7f75fa AK |
4341 | break; |
4342 | case SIOCSMIIREG: | |
4343 | default: | |
4344 | return -EOPNOTSUPP; | |
4345 | } | |
4346 | return 0; | |
4347 | } | |
4348 | ||
4349 | static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) | |
4350 | { | |
4351 | switch (cmd) { | |
4352 | case SIOCGMIIPHY: | |
4353 | case SIOCGMIIREG: | |
4354 | case SIOCSMIIREG: | |
4355 | return e1000_mii_ioctl(netdev, ifr, cmd); | |
4356 | default: | |
4357 | return -EOPNOTSUPP; | |
4358 | } | |
4359 | } | |
4360 | ||
4361 | static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) | |
4362 | { | |
4363 | struct net_device *netdev = pci_get_drvdata(pdev); | |
4364 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4365 | struct e1000_hw *hw = &adapter->hw; | |
4366 | u32 ctrl, ctrl_ext, rctl, status; | |
4367 | u32 wufc = adapter->wol; | |
4368 | int retval = 0; | |
4369 | ||
4370 | netif_device_detach(netdev); | |
4371 | ||
4372 | if (netif_running(netdev)) { | |
4373 | WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); | |
4374 | e1000e_down(adapter); | |
4375 | e1000_free_irq(adapter); | |
4376 | } | |
4662e82b | 4377 | e1000e_reset_interrupt_capability(adapter); |
bc7f75fa AK |
4378 | |
4379 | retval = pci_save_state(pdev); | |
4380 | if (retval) | |
4381 | return retval; | |
4382 | ||
4383 | status = er32(STATUS); | |
4384 | if (status & E1000_STATUS_LU) | |
4385 | wufc &= ~E1000_WUFC_LNKC; | |
4386 | ||
4387 | if (wufc) { | |
4388 | e1000_setup_rctl(adapter); | |
4389 | e1000_set_multi(netdev); | |
4390 | ||
4391 | /* turn on all-multi mode if wake on multicast is enabled */ | |
4392 | if (wufc & E1000_WUFC_MC) { | |
4393 | rctl = er32(RCTL); | |
4394 | rctl |= E1000_RCTL_MPE; | |
4395 | ew32(RCTL, rctl); | |
4396 | } | |
4397 | ||
4398 | ctrl = er32(CTRL); | |
4399 | /* advertise wake from D3Cold */ | |
4400 | #define E1000_CTRL_ADVD3WUC 0x00100000 | |
4401 | /* phy power management enable */ | |
4402 | #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 | |
4403 | ctrl |= E1000_CTRL_ADVD3WUC | | |
4404 | E1000_CTRL_EN_PHY_PWR_MGMT; | |
4405 | ew32(CTRL, ctrl); | |
4406 | ||
318a94d6 JK |
4407 | if (adapter->hw.phy.media_type == e1000_media_type_fiber || |
4408 | adapter->hw.phy.media_type == | |
4409 | e1000_media_type_internal_serdes) { | |
bc7f75fa AK |
4410 | /* keep the laser running in D3 */ |
4411 | ctrl_ext = er32(CTRL_EXT); | |
4412 | ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA; | |
4413 | ew32(CTRL_EXT, ctrl_ext); | |
4414 | } | |
4415 | ||
97ac8cae BA |
4416 | if (adapter->flags & FLAG_IS_ICH) |
4417 | e1000e_disable_gig_wol_ich8lan(&adapter->hw); | |
4418 | ||
bc7f75fa AK |
4419 | /* Allow time for pending master requests to run */ |
4420 | e1000e_disable_pcie_master(&adapter->hw); | |
4421 | ||
4422 | ew32(WUC, E1000_WUC_PME_EN); | |
4423 | ew32(WUFC, wufc); | |
4424 | pci_enable_wake(pdev, PCI_D3hot, 1); | |
4425 | pci_enable_wake(pdev, PCI_D3cold, 1); | |
4426 | } else { | |
4427 | ew32(WUC, 0); | |
4428 | ew32(WUFC, 0); | |
4429 | pci_enable_wake(pdev, PCI_D3hot, 0); | |
4430 | pci_enable_wake(pdev, PCI_D3cold, 0); | |
4431 | } | |
4432 | ||
bc7f75fa AK |
4433 | /* make sure adapter isn't asleep if manageability is enabled */ |
4434 | if (adapter->flags & FLAG_MNG_PT_ENABLED) { | |
4435 | pci_enable_wake(pdev, PCI_D3hot, 1); | |
4436 | pci_enable_wake(pdev, PCI_D3cold, 1); | |
4437 | } | |
4438 | ||
4439 | if (adapter->hw.phy.type == e1000_phy_igp_3) | |
4440 | e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); | |
4441 | ||
ad68076e BA |
4442 | /* |
4443 | * Release control of h/w to f/w. If f/w is AMT enabled, this | |
4444 | * would have already happened in close and is redundant. | |
4445 | */ | |
bc7f75fa AK |
4446 | e1000_release_hw_control(adapter); |
4447 | ||
4448 | pci_disable_device(pdev); | |
4449 | ||
4450 | pci_set_power_state(pdev, pci_choose_state(pdev, state)); | |
4451 | ||
4452 | return 0; | |
4453 | } | |
4454 | ||
1eae4eb2 AK |
4455 | static void e1000e_disable_l1aspm(struct pci_dev *pdev) |
4456 | { | |
4457 | int pos; | |
1eae4eb2 AK |
4458 | u16 val; |
4459 | ||
4460 | /* | |
4461 | * 82573 workaround - disable L1 ASPM on mobile chipsets | |
4462 | * | |
4463 | * L1 ASPM on various mobile (ich7) chipsets do not behave properly | |
4464 | * resulting in lost data or garbage information on the pci-e link | |
4465 | * level. This could result in (false) bad EEPROM checksum errors, | |
4466 | * long ping times (up to 2s) or even a system freeze/hang. | |
4467 | * | |
4468 | * Unfortunately this feature saves about 1W power consumption when | |
4469 | * active. | |
4470 | */ | |
4471 | pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); | |
1eae4eb2 AK |
4472 | pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val); |
4473 | if (val & 0x2) { | |
4474 | dev_warn(&pdev->dev, "Disabling L1 ASPM\n"); | |
4475 | val &= ~0x2; | |
4476 | pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, val); | |
4477 | } | |
4478 | } | |
4479 | ||
bc7f75fa AK |
4480 | #ifdef CONFIG_PM |
4481 | static int e1000_resume(struct pci_dev *pdev) | |
4482 | { | |
4483 | struct net_device *netdev = pci_get_drvdata(pdev); | |
4484 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4485 | struct e1000_hw *hw = &adapter->hw; | |
4486 | u32 err; | |
4487 | ||
4488 | pci_set_power_state(pdev, PCI_D0); | |
4489 | pci_restore_state(pdev); | |
1eae4eb2 | 4490 | e1000e_disable_l1aspm(pdev); |
6e4f6f6b | 4491 | |
f0f422e5 | 4492 | err = pci_enable_device_mem(pdev); |
bc7f75fa AK |
4493 | if (err) { |
4494 | dev_err(&pdev->dev, | |
4495 | "Cannot enable PCI device from suspend\n"); | |
4496 | return err; | |
4497 | } | |
4498 | ||
4499 | pci_set_master(pdev); | |
4500 | ||
4501 | pci_enable_wake(pdev, PCI_D3hot, 0); | |
4502 | pci_enable_wake(pdev, PCI_D3cold, 0); | |
4503 | ||
4662e82b | 4504 | e1000e_set_interrupt_capability(adapter); |
bc7f75fa AK |
4505 | if (netif_running(netdev)) { |
4506 | err = e1000_request_irq(adapter); | |
4507 | if (err) | |
4508 | return err; | |
4509 | } | |
4510 | ||
4511 | e1000e_power_up_phy(adapter); | |
4512 | e1000e_reset(adapter); | |
4513 | ew32(WUS, ~0); | |
4514 | ||
4515 | e1000_init_manageability(adapter); | |
4516 | ||
4517 | if (netif_running(netdev)) | |
4518 | e1000e_up(adapter); | |
4519 | ||
4520 | netif_device_attach(netdev); | |
4521 | ||
ad68076e BA |
4522 | /* |
4523 | * If the controller has AMT, do not set DRV_LOAD until the interface | |
bc7f75fa | 4524 | * is up. For all other cases, let the f/w know that the h/w is now |
ad68076e BA |
4525 | * under the control of the driver. |
4526 | */ | |
c43bc57e | 4527 | if (!(adapter->flags & FLAG_HAS_AMT)) |
bc7f75fa AK |
4528 | e1000_get_hw_control(adapter); |
4529 | ||
4530 | return 0; | |
4531 | } | |
4532 | #endif | |
4533 | ||
4534 | static void e1000_shutdown(struct pci_dev *pdev) | |
4535 | { | |
4536 | e1000_suspend(pdev, PMSG_SUSPEND); | |
4537 | } | |
4538 | ||
4539 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
4540 | /* | |
4541 | * Polling 'interrupt' - used by things like netconsole to send skbs | |
4542 | * without having to re-enable interrupts. It's not called while | |
4543 | * the interrupt routine is executing. | |
4544 | */ | |
4545 | static void e1000_netpoll(struct net_device *netdev) | |
4546 | { | |
4547 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4548 | ||
4549 | disable_irq(adapter->pdev->irq); | |
4550 | e1000_intr(adapter->pdev->irq, netdev); | |
4551 | ||
bc7f75fa AK |
4552 | enable_irq(adapter->pdev->irq); |
4553 | } | |
4554 | #endif | |
4555 | ||
4556 | /** | |
4557 | * e1000_io_error_detected - called when PCI error is detected | |
4558 | * @pdev: Pointer to PCI device | |
4559 | * @state: The current pci connection state | |
4560 | * | |
4561 | * This function is called after a PCI bus error affecting | |
4562 | * this device has been detected. | |
4563 | */ | |
4564 | static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, | |
4565 | pci_channel_state_t state) | |
4566 | { | |
4567 | struct net_device *netdev = pci_get_drvdata(pdev); | |
4568 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4569 | ||
4570 | netif_device_detach(netdev); | |
4571 | ||
4572 | if (netif_running(netdev)) | |
4573 | e1000e_down(adapter); | |
4574 | pci_disable_device(pdev); | |
4575 | ||
4576 | /* Request a slot slot reset. */ | |
4577 | return PCI_ERS_RESULT_NEED_RESET; | |
4578 | } | |
4579 | ||
4580 | /** | |
4581 | * e1000_io_slot_reset - called after the pci bus has been reset. | |
4582 | * @pdev: Pointer to PCI device | |
4583 | * | |
4584 | * Restart the card from scratch, as if from a cold-boot. Implementation | |
4585 | * resembles the first-half of the e1000_resume routine. | |
4586 | */ | |
4587 | static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) | |
4588 | { | |
4589 | struct net_device *netdev = pci_get_drvdata(pdev); | |
4590 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4591 | struct e1000_hw *hw = &adapter->hw; | |
6e4f6f6b | 4592 | int err; |
bc7f75fa | 4593 | |
1eae4eb2 | 4594 | e1000e_disable_l1aspm(pdev); |
f0f422e5 | 4595 | err = pci_enable_device_mem(pdev); |
6e4f6f6b | 4596 | if (err) { |
bc7f75fa AK |
4597 | dev_err(&pdev->dev, |
4598 | "Cannot re-enable PCI device after reset.\n"); | |
4599 | return PCI_ERS_RESULT_DISCONNECT; | |
4600 | } | |
4601 | pci_set_master(pdev); | |
aad32739 | 4602 | pci_restore_state(pdev); |
bc7f75fa AK |
4603 | |
4604 | pci_enable_wake(pdev, PCI_D3hot, 0); | |
4605 | pci_enable_wake(pdev, PCI_D3cold, 0); | |
4606 | ||
4607 | e1000e_reset(adapter); | |
4608 | ew32(WUS, ~0); | |
4609 | ||
4610 | return PCI_ERS_RESULT_RECOVERED; | |
4611 | } | |
4612 | ||
4613 | /** | |
4614 | * e1000_io_resume - called when traffic can start flowing again. | |
4615 | * @pdev: Pointer to PCI device | |
4616 | * | |
4617 | * This callback is called when the error recovery driver tells us that | |
4618 | * its OK to resume normal operation. Implementation resembles the | |
4619 | * second-half of the e1000_resume routine. | |
4620 | */ | |
4621 | static void e1000_io_resume(struct pci_dev *pdev) | |
4622 | { | |
4623 | struct net_device *netdev = pci_get_drvdata(pdev); | |
4624 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
4625 | ||
4626 | e1000_init_manageability(adapter); | |
4627 | ||
4628 | if (netif_running(netdev)) { | |
4629 | if (e1000e_up(adapter)) { | |
4630 | dev_err(&pdev->dev, | |
4631 | "can't bring device back up after reset\n"); | |
4632 | return; | |
4633 | } | |
4634 | } | |
4635 | ||
4636 | netif_device_attach(netdev); | |
4637 | ||
ad68076e BA |
4638 | /* |
4639 | * If the controller has AMT, do not set DRV_LOAD until the interface | |
bc7f75fa | 4640 | * is up. For all other cases, let the f/w know that the h/w is now |
ad68076e BA |
4641 | * under the control of the driver. |
4642 | */ | |
c43bc57e | 4643 | if (!(adapter->flags & FLAG_HAS_AMT)) |
bc7f75fa AK |
4644 | e1000_get_hw_control(adapter); |
4645 | ||
4646 | } | |
4647 | ||
4648 | static void e1000_print_device_info(struct e1000_adapter *adapter) | |
4649 | { | |
4650 | struct e1000_hw *hw = &adapter->hw; | |
4651 | struct net_device *netdev = adapter->netdev; | |
69e3fd8c | 4652 | u32 pba_num; |
bc7f75fa AK |
4653 | |
4654 | /* print bus type/speed/width info */ | |
44defeb3 JK |
4655 | e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n", |
4656 | /* bus width */ | |
4657 | ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : | |
4658 | "Width x1"), | |
4659 | /* MAC address */ | |
4660 | netdev->dev_addr[0], netdev->dev_addr[1], | |
4661 | netdev->dev_addr[2], netdev->dev_addr[3], | |
4662 | netdev->dev_addr[4], netdev->dev_addr[5]); | |
4663 | e_info("Intel(R) PRO/%s Network Connection\n", | |
4664 | (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000"); | |
69e3fd8c | 4665 | e1000e_read_pba_num(hw, &pba_num); |
44defeb3 JK |
4666 | e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n", |
4667 | hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff)); | |
bc7f75fa AK |
4668 | } |
4669 | ||
10aa4c04 AK |
4670 | static void e1000_eeprom_checks(struct e1000_adapter *adapter) |
4671 | { | |
4672 | struct e1000_hw *hw = &adapter->hw; | |
4673 | int ret_val; | |
4674 | u16 buf = 0; | |
4675 | ||
4676 | if (hw->mac.type != e1000_82573) | |
4677 | return; | |
4678 | ||
4679 | ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf); | |
4680 | if (!(le16_to_cpu(buf) & (1 << 0))) { | |
4681 | /* Deep Smart Power Down (DSPD) */ | |
6c2a9efa FP |
4682 | dev_warn(&adapter->pdev->dev, |
4683 | "Warning: detected DSPD enabled in EEPROM\n"); | |
10aa4c04 AK |
4684 | } |
4685 | ||
4686 | ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf); | |
4687 | if (le16_to_cpu(buf) & (3 << 2)) { | |
4688 | /* ASPM enable */ | |
6c2a9efa FP |
4689 | dev_warn(&adapter->pdev->dev, |
4690 | "Warning: detected ASPM enabled in EEPROM\n"); | |
10aa4c04 AK |
4691 | } |
4692 | } | |
4693 | ||
bc7f75fa AK |
4694 | /** |
4695 | * e1000_probe - Device Initialization Routine | |
4696 | * @pdev: PCI device information struct | |
4697 | * @ent: entry in e1000_pci_tbl | |
4698 | * | |
4699 | * Returns 0 on success, negative on failure | |
4700 | * | |
4701 | * e1000_probe initializes an adapter identified by a pci_dev structure. | |
4702 | * The OS initialization, configuring of the adapter private structure, | |
4703 | * and a hardware reset occur. | |
4704 | **/ | |
4705 | static int __devinit e1000_probe(struct pci_dev *pdev, | |
4706 | const struct pci_device_id *ent) | |
4707 | { | |
4708 | struct net_device *netdev; | |
4709 | struct e1000_adapter *adapter; | |
4710 | struct e1000_hw *hw; | |
4711 | const struct e1000_info *ei = e1000_info_tbl[ent->driver_data]; | |
f47e81fc BB |
4712 | resource_size_t mmio_start, mmio_len; |
4713 | resource_size_t flash_start, flash_len; | |
bc7f75fa AK |
4714 | |
4715 | static int cards_found; | |
4716 | int i, err, pci_using_dac; | |
4717 | u16 eeprom_data = 0; | |
4718 | u16 eeprom_apme_mask = E1000_EEPROM_APME; | |
4719 | ||
1eae4eb2 | 4720 | e1000e_disable_l1aspm(pdev); |
6e4f6f6b | 4721 | |
f0f422e5 | 4722 | err = pci_enable_device_mem(pdev); |
bc7f75fa AK |
4723 | if (err) |
4724 | return err; | |
4725 | ||
4726 | pci_using_dac = 0; | |
4727 | err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); | |
4728 | if (!err) { | |
4729 | err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); | |
4730 | if (!err) | |
4731 | pci_using_dac = 1; | |
4732 | } else { | |
4733 | err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); | |
4734 | if (err) { | |
4735 | err = pci_set_consistent_dma_mask(pdev, | |
4736 | DMA_32BIT_MASK); | |
4737 | if (err) { | |
4738 | dev_err(&pdev->dev, "No usable DMA " | |
4739 | "configuration, aborting\n"); | |
4740 | goto err_dma; | |
4741 | } | |
4742 | } | |
4743 | } | |
4744 | ||
f0f422e5 BA |
4745 | err = pci_request_selected_regions(pdev, |
4746 | pci_select_bars(pdev, IORESOURCE_MEM), | |
4747 | e1000e_driver_name); | |
bc7f75fa AK |
4748 | if (err) |
4749 | goto err_pci_reg; | |
4750 | ||
4751 | pci_set_master(pdev); | |
aad32739 | 4752 | pci_save_state(pdev); |
bc7f75fa AK |
4753 | |
4754 | err = -ENOMEM; | |
4755 | netdev = alloc_etherdev(sizeof(struct e1000_adapter)); | |
4756 | if (!netdev) | |
4757 | goto err_alloc_etherdev; | |
4758 | ||
bc7f75fa AK |
4759 | SET_NETDEV_DEV(netdev, &pdev->dev); |
4760 | ||
4761 | pci_set_drvdata(pdev, netdev); | |
4762 | adapter = netdev_priv(netdev); | |
4763 | hw = &adapter->hw; | |
4764 | adapter->netdev = netdev; | |
4765 | adapter->pdev = pdev; | |
4766 | adapter->ei = ei; | |
4767 | adapter->pba = ei->pba; | |
4768 | adapter->flags = ei->flags; | |
4769 | adapter->hw.adapter = adapter; | |
4770 | adapter->hw.mac.type = ei->mac; | |
4771 | adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; | |
4772 | ||
4773 | mmio_start = pci_resource_start(pdev, 0); | |
4774 | mmio_len = pci_resource_len(pdev, 0); | |
4775 | ||
4776 | err = -EIO; | |
4777 | adapter->hw.hw_addr = ioremap(mmio_start, mmio_len); | |
4778 | if (!adapter->hw.hw_addr) | |
4779 | goto err_ioremap; | |
4780 | ||
4781 | if ((adapter->flags & FLAG_HAS_FLASH) && | |
4782 | (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { | |
4783 | flash_start = pci_resource_start(pdev, 1); | |
4784 | flash_len = pci_resource_len(pdev, 1); | |
4785 | adapter->hw.flash_address = ioremap(flash_start, flash_len); | |
4786 | if (!adapter->hw.flash_address) | |
4787 | goto err_flashmap; | |
4788 | } | |
4789 | ||
4790 | /* construct the net_device struct */ | |
4791 | netdev->open = &e1000_open; | |
4792 | netdev->stop = &e1000_close; | |
4793 | netdev->hard_start_xmit = &e1000_xmit_frame; | |
4794 | netdev->get_stats = &e1000_get_stats; | |
4795 | netdev->set_multicast_list = &e1000_set_multi; | |
4796 | netdev->set_mac_address = &e1000_set_mac; | |
4797 | netdev->change_mtu = &e1000_change_mtu; | |
4798 | netdev->do_ioctl = &e1000_ioctl; | |
4799 | e1000e_set_ethtool_ops(netdev); | |
4800 | netdev->tx_timeout = &e1000_tx_timeout; | |
4801 | netdev->watchdog_timeo = 5 * HZ; | |
4802 | netif_napi_add(netdev, &adapter->napi, e1000_clean, 64); | |
4803 | netdev->vlan_rx_register = e1000_vlan_rx_register; | |
4804 | netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid; | |
4805 | netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid; | |
4806 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
4807 | netdev->poll_controller = e1000_netpoll; | |
4808 | #endif | |
4809 | strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); | |
4810 | ||
4811 | netdev->mem_start = mmio_start; | |
4812 | netdev->mem_end = mmio_start + mmio_len; | |
4813 | ||
4814 | adapter->bd_number = cards_found++; | |
4815 | ||
4662e82b BA |
4816 | e1000e_check_options(adapter); |
4817 | ||
bc7f75fa AK |
4818 | /* setup adapter struct */ |
4819 | err = e1000_sw_init(adapter); | |
4820 | if (err) | |
4821 | goto err_sw_init; | |
4822 | ||
4823 | err = -EIO; | |
4824 | ||
4825 | memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops)); | |
4826 | memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops)); | |
4827 | memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops)); | |
4828 | ||
69e3fd8c | 4829 | err = ei->get_variants(adapter); |
bc7f75fa AK |
4830 | if (err) |
4831 | goto err_hw_init; | |
4832 | ||
4a770358 BA |
4833 | if ((adapter->flags & FLAG_IS_ICH) && |
4834 | (adapter->flags & FLAG_READ_ONLY_NVM)) | |
4835 | e1000e_write_protect_nvm_ich8lan(&adapter->hw); | |
4836 | ||
bc7f75fa AK |
4837 | hw->mac.ops.get_bus_info(&adapter->hw); |
4838 | ||
318a94d6 | 4839 | adapter->hw.phy.autoneg_wait_to_complete = 0; |
bc7f75fa AK |
4840 | |
4841 | /* Copper options */ | |
318a94d6 | 4842 | if (adapter->hw.phy.media_type == e1000_media_type_copper) { |
bc7f75fa AK |
4843 | adapter->hw.phy.mdix = AUTO_ALL_MODES; |
4844 | adapter->hw.phy.disable_polarity_correction = 0; | |
4845 | adapter->hw.phy.ms_type = e1000_ms_hw_default; | |
4846 | } | |
4847 | ||
4848 | if (e1000_check_reset_block(&adapter->hw)) | |
44defeb3 | 4849 | e_info("PHY reset is blocked due to SOL/IDER session.\n"); |
bc7f75fa AK |
4850 | |
4851 | netdev->features = NETIF_F_SG | | |
4852 | NETIF_F_HW_CSUM | | |
4853 | NETIF_F_HW_VLAN_TX | | |
4854 | NETIF_F_HW_VLAN_RX; | |
4855 | ||
4856 | if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) | |
4857 | netdev->features |= NETIF_F_HW_VLAN_FILTER; | |
4858 | ||
4859 | netdev->features |= NETIF_F_TSO; | |
4860 | netdev->features |= NETIF_F_TSO6; | |
4861 | ||
a5136e23 JK |
4862 | netdev->vlan_features |= NETIF_F_TSO; |
4863 | netdev->vlan_features |= NETIF_F_TSO6; | |
4864 | netdev->vlan_features |= NETIF_F_HW_CSUM; | |
4865 | netdev->vlan_features |= NETIF_F_SG; | |
4866 | ||
bc7f75fa AK |
4867 | if (pci_using_dac) |
4868 | netdev->features |= NETIF_F_HIGHDMA; | |
4869 | ||
ad68076e BA |
4870 | /* |
4871 | * We should not be using LLTX anymore, but we are still Tx faster with | |
4872 | * it. | |
4873 | */ | |
bc7f75fa AK |
4874 | netdev->features |= NETIF_F_LLTX; |
4875 | ||
4876 | if (e1000e_enable_mng_pass_thru(&adapter->hw)) | |
4877 | adapter->flags |= FLAG_MNG_PT_ENABLED; | |
4878 | ||
ad68076e BA |
4879 | /* |
4880 | * before reading the NVM, reset the controller to | |
4881 | * put the device in a known good starting state | |
4882 | */ | |
bc7f75fa AK |
4883 | adapter->hw.mac.ops.reset_hw(&adapter->hw); |
4884 | ||
4885 | /* | |
4886 | * systems with ASPM and others may see the checksum fail on the first | |
4887 | * attempt. Let's give it a few tries | |
4888 | */ | |
4889 | for (i = 0;; i++) { | |
4890 | if (e1000_validate_nvm_checksum(&adapter->hw) >= 0) | |
4891 | break; | |
4892 | if (i == 2) { | |
44defeb3 | 4893 | e_err("The NVM Checksum Is Not Valid\n"); |
bc7f75fa AK |
4894 | err = -EIO; |
4895 | goto err_eeprom; | |
4896 | } | |
4897 | } | |
4898 | ||
10aa4c04 AK |
4899 | e1000_eeprom_checks(adapter); |
4900 | ||
bc7f75fa AK |
4901 | /* copy the MAC address out of the NVM */ |
4902 | if (e1000e_read_mac_addr(&adapter->hw)) | |
44defeb3 | 4903 | e_err("NVM Read Error while reading MAC address\n"); |
bc7f75fa AK |
4904 | |
4905 | memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); | |
4906 | memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); | |
4907 | ||
4908 | if (!is_valid_ether_addr(netdev->perm_addr)) { | |
44defeb3 JK |
4909 | e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n", |
4910 | netdev->perm_addr[0], netdev->perm_addr[1], | |
4911 | netdev->perm_addr[2], netdev->perm_addr[3], | |
4912 | netdev->perm_addr[4], netdev->perm_addr[5]); | |
bc7f75fa AK |
4913 | err = -EIO; |
4914 | goto err_eeprom; | |
4915 | } | |
4916 | ||
4917 | init_timer(&adapter->watchdog_timer); | |
4918 | adapter->watchdog_timer.function = &e1000_watchdog; | |
4919 | adapter->watchdog_timer.data = (unsigned long) adapter; | |
4920 | ||
4921 | init_timer(&adapter->phy_info_timer); | |
4922 | adapter->phy_info_timer.function = &e1000_update_phy_info; | |
4923 | adapter->phy_info_timer.data = (unsigned long) adapter; | |
4924 | ||
4925 | INIT_WORK(&adapter->reset_task, e1000_reset_task); | |
4926 | INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); | |
a8f88ff5 JB |
4927 | INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); |
4928 | INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); | |
bc7f75fa | 4929 | |
bc7f75fa AK |
4930 | /* Initialize link parameters. User can change them with ethtool */ |
4931 | adapter->hw.mac.autoneg = 1; | |
309af40b | 4932 | adapter->fc_autoneg = 1; |
318a94d6 JK |
4933 | adapter->hw.fc.original_type = e1000_fc_default; |
4934 | adapter->hw.fc.type = e1000_fc_default; | |
bc7f75fa AK |
4935 | adapter->hw.phy.autoneg_advertised = 0x2f; |
4936 | ||
4937 | /* ring size defaults */ | |
4938 | adapter->rx_ring->count = 256; | |
4939 | adapter->tx_ring->count = 256; | |
4940 | ||
4941 | /* | |
4942 | * Initial Wake on LAN setting - If APM wake is enabled in | |
4943 | * the EEPROM, enable the ACPI Magic Packet filter | |
4944 | */ | |
4945 | if (adapter->flags & FLAG_APME_IN_WUC) { | |
4946 | /* APME bit in EEPROM is mapped to WUC.APME */ | |
4947 | eeprom_data = er32(WUC); | |
4948 | eeprom_apme_mask = E1000_WUC_APME; | |
4949 | } else if (adapter->flags & FLAG_APME_IN_CTRL3) { | |
4950 | if (adapter->flags & FLAG_APME_CHECK_PORT_B && | |
4951 | (adapter->hw.bus.func == 1)) | |
4952 | e1000_read_nvm(&adapter->hw, | |
4953 | NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); | |
4954 | else | |
4955 | e1000_read_nvm(&adapter->hw, | |
4956 | NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data); | |
4957 | } | |
4958 | ||
4959 | /* fetch WoL from EEPROM */ | |
4960 | if (eeprom_data & eeprom_apme_mask) | |
4961 | adapter->eeprom_wol |= E1000_WUFC_MAG; | |
4962 | ||
4963 | /* | |
4964 | * now that we have the eeprom settings, apply the special cases | |
4965 | * where the eeprom may be wrong or the board simply won't support | |
4966 | * wake on lan on a particular port | |
4967 | */ | |
4968 | if (!(adapter->flags & FLAG_HAS_WOL)) | |
4969 | adapter->eeprom_wol = 0; | |
4970 | ||
4971 | /* initialize the wol settings based on the eeprom settings */ | |
4972 | adapter->wol = adapter->eeprom_wol; | |
6ff68026 | 4973 | device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); |
bc7f75fa AK |
4974 | |
4975 | /* reset the hardware with the new settings */ | |
4976 | e1000e_reset(adapter); | |
4977 | ||
ad68076e BA |
4978 | /* |
4979 | * If the controller has AMT, do not set DRV_LOAD until the interface | |
bc7f75fa | 4980 | * is up. For all other cases, let the f/w know that the h/w is now |
ad68076e BA |
4981 | * under the control of the driver. |
4982 | */ | |
c43bc57e | 4983 | if (!(adapter->flags & FLAG_HAS_AMT)) |
bc7f75fa AK |
4984 | e1000_get_hw_control(adapter); |
4985 | ||
4986 | /* tell the stack to leave us alone until e1000_open() is called */ | |
4987 | netif_carrier_off(netdev); | |
d55b53ff | 4988 | netif_tx_stop_all_queues(netdev); |
bc7f75fa AK |
4989 | |
4990 | strcpy(netdev->name, "eth%d"); | |
4991 | err = register_netdev(netdev); | |
4992 | if (err) | |
4993 | goto err_register; | |
4994 | ||
4995 | e1000_print_device_info(adapter); | |
4996 | ||
4997 | return 0; | |
4998 | ||
4999 | err_register: | |
c43bc57e JB |
5000 | if (!(adapter->flags & FLAG_HAS_AMT)) |
5001 | e1000_release_hw_control(adapter); | |
bc7f75fa AK |
5002 | err_eeprom: |
5003 | if (!e1000_check_reset_block(&adapter->hw)) | |
5004 | e1000_phy_hw_reset(&adapter->hw); | |
c43bc57e | 5005 | err_hw_init: |
bc7f75fa | 5006 | |
bc7f75fa AK |
5007 | kfree(adapter->tx_ring); |
5008 | kfree(adapter->rx_ring); | |
5009 | err_sw_init: | |
c43bc57e JB |
5010 | if (adapter->hw.flash_address) |
5011 | iounmap(adapter->hw.flash_address); | |
5012 | err_flashmap: | |
bc7f75fa AK |
5013 | iounmap(adapter->hw.hw_addr); |
5014 | err_ioremap: | |
5015 | free_netdev(netdev); | |
5016 | err_alloc_etherdev: | |
f0f422e5 BA |
5017 | pci_release_selected_regions(pdev, |
5018 | pci_select_bars(pdev, IORESOURCE_MEM)); | |
bc7f75fa AK |
5019 | err_pci_reg: |
5020 | err_dma: | |
5021 | pci_disable_device(pdev); | |
5022 | return err; | |
5023 | } | |
5024 | ||
5025 | /** | |
5026 | * e1000_remove - Device Removal Routine | |
5027 | * @pdev: PCI device information struct | |
5028 | * | |
5029 | * e1000_remove is called by the PCI subsystem to alert the driver | |
5030 | * that it should release a PCI device. The could be caused by a | |
5031 | * Hot-Plug event, or because the driver is going to be removed from | |
5032 | * memory. | |
5033 | **/ | |
5034 | static void __devexit e1000_remove(struct pci_dev *pdev) | |
5035 | { | |
5036 | struct net_device *netdev = pci_get_drvdata(pdev); | |
5037 | struct e1000_adapter *adapter = netdev_priv(netdev); | |
5038 | ||
ad68076e BA |
5039 | /* |
5040 | * flush_scheduled work may reschedule our watchdog task, so | |
5041 | * explicitly disable watchdog tasks from being rescheduled | |
5042 | */ | |
bc7f75fa AK |
5043 | set_bit(__E1000_DOWN, &adapter->state); |
5044 | del_timer_sync(&adapter->watchdog_timer); | |
5045 | del_timer_sync(&adapter->phy_info_timer); | |
5046 | ||
5047 | flush_scheduled_work(); | |
5048 | ||
ad68076e BA |
5049 | /* |
5050 | * Release control of h/w to f/w. If f/w is AMT enabled, this | |
5051 | * would have already happened in close and is redundant. | |
5052 | */ | |
bc7f75fa AK |
5053 | e1000_release_hw_control(adapter); |
5054 | ||
5055 | unregister_netdev(netdev); | |
5056 | ||
5057 | if (!e1000_check_reset_block(&adapter->hw)) | |
5058 | e1000_phy_hw_reset(&adapter->hw); | |
5059 | ||
4662e82b | 5060 | e1000e_reset_interrupt_capability(adapter); |
bc7f75fa AK |
5061 | kfree(adapter->tx_ring); |
5062 | kfree(adapter->rx_ring); | |
5063 | ||
5064 | iounmap(adapter->hw.hw_addr); | |
5065 | if (adapter->hw.flash_address) | |
5066 | iounmap(adapter->hw.flash_address); | |
f0f422e5 BA |
5067 | pci_release_selected_regions(pdev, |
5068 | pci_select_bars(pdev, IORESOURCE_MEM)); | |
bc7f75fa AK |
5069 | |
5070 | free_netdev(netdev); | |
5071 | ||
5072 | pci_disable_device(pdev); | |
5073 | } | |
5074 | ||
5075 | /* PCI Error Recovery (ERS) */ | |
5076 | static struct pci_error_handlers e1000_err_handler = { | |
5077 | .error_detected = e1000_io_error_detected, | |
5078 | .slot_reset = e1000_io_slot_reset, | |
5079 | .resume = e1000_io_resume, | |
5080 | }; | |
5081 | ||
5082 | static struct pci_device_id e1000_pci_tbl[] = { | |
bc7f75fa AK |
5083 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 }, |
5084 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 }, | |
5085 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 }, | |
5086 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 }, | |
5087 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 }, | |
5088 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 }, | |
040babf9 AK |
5089 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 }, |
5090 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 }, | |
5091 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 }, | |
ad68076e | 5092 | |
bc7f75fa AK |
5093 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 }, |
5094 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 }, | |
5095 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 }, | |
5096 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 }, | |
ad68076e | 5097 | |
bc7f75fa AK |
5098 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 }, |
5099 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 }, | |
5100 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 }, | |
ad68076e | 5101 | |
4662e82b BA |
5102 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 }, |
5103 | ||
bc7f75fa AK |
5104 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT), |
5105 | board_80003es2lan }, | |
5106 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT), | |
5107 | board_80003es2lan }, | |
5108 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT), | |
5109 | board_80003es2lan }, | |
5110 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT), | |
5111 | board_80003es2lan }, | |
ad68076e | 5112 | |
bc7f75fa AK |
5113 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan }, |
5114 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan }, | |
5115 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan }, | |
5116 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan }, | |
5117 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan }, | |
5118 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan }, | |
5119 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan }, | |
ad68076e | 5120 | |
bc7f75fa AK |
5121 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan }, |
5122 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan }, | |
5123 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan }, | |
5124 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan }, | |
5125 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan }, | |
2f15f9d6 | 5126 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan }, |
97ac8cae BA |
5127 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan }, |
5128 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan }, | |
5129 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan }, | |
5130 | ||
5131 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan }, | |
5132 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan }, | |
5133 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan }, | |
bc7f75fa | 5134 | |
f4187b56 BA |
5135 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan }, |
5136 | { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan }, | |
5137 | ||
bc7f75fa AK |
5138 | { } /* terminate list */ |
5139 | }; | |
5140 | MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); | |
5141 | ||
5142 | /* PCI Device API Driver */ | |
5143 | static struct pci_driver e1000_driver = { | |
5144 | .name = e1000e_driver_name, | |
5145 | .id_table = e1000_pci_tbl, | |
5146 | .probe = e1000_probe, | |
5147 | .remove = __devexit_p(e1000_remove), | |
5148 | #ifdef CONFIG_PM | |
ad68076e | 5149 | /* Power Management Hooks */ |
bc7f75fa AK |
5150 | .suspend = e1000_suspend, |
5151 | .resume = e1000_resume, | |
5152 | #endif | |
5153 | .shutdown = e1000_shutdown, | |
5154 | .err_handler = &e1000_err_handler | |
5155 | }; | |
5156 | ||
5157 | /** | |
5158 | * e1000_init_module - Driver Registration Routine | |
5159 | * | |
5160 | * e1000_init_module is the first routine called when the driver is | |
5161 | * loaded. All it does is register with the PCI subsystem. | |
5162 | **/ | |
5163 | static int __init e1000_init_module(void) | |
5164 | { | |
5165 | int ret; | |
5166 | printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n", | |
5167 | e1000e_driver_name, e1000e_driver_version); | |
ad68076e | 5168 | printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n", |
bc7f75fa AK |
5169 | e1000e_driver_name); |
5170 | ret = pci_register_driver(&e1000_driver); | |
97ac8cae BA |
5171 | pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name, |
5172 | PM_QOS_DEFAULT_VALUE); | |
5173 | ||
bc7f75fa AK |
5174 | return ret; |
5175 | } | |
5176 | module_init(e1000_init_module); | |
5177 | ||
5178 | /** | |
5179 | * e1000_exit_module - Driver Exit Cleanup Routine | |
5180 | * | |
5181 | * e1000_exit_module is called just before the driver is removed | |
5182 | * from memory. | |
5183 | **/ | |
5184 | static void __exit e1000_exit_module(void) | |
5185 | { | |
5186 | pci_unregister_driver(&e1000_driver); | |
97ac8cae | 5187 | pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name); |
bc7f75fa AK |
5188 | } |
5189 | module_exit(e1000_exit_module); | |
5190 | ||
5191 | ||
5192 | MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); | |
5193 | MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver"); | |
5194 | MODULE_LICENSE("GPL"); | |
5195 | MODULE_VERSION(DRV_VERSION); | |
5196 | ||
5197 | /* e1000_main.c */ |