]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blame - drivers/net/ethernet/apple/mac89x0.c
net: remove use of ndo_set_multicast_list in drivers
[mirror_ubuntu-artful-kernel.git] / drivers / net / ethernet / apple / mac89x0.c
CommitLineData
1da177e4
LT
1/* mac89x0.c: A Crystal Semiconductor CS89[02]0 driver for linux. */
2/*
3 Written 1996 by Russell Nelson, with reference to skeleton.c
4 written 1993-1994 by Donald Becker.
5
6 This software may be used and distributed according to the terms
7 of the GNU General Public License, incorporated herein by reference.
8
9 The author may be reached at nelson@crynwr.com, Crynwr
10 Software, 11 Grant St., Potsdam, NY 13676
11
12 Changelog:
13
14 Mike Cruse : mcruse@cti-ltd.com
6aa20a22 15 : Changes for Linux 2.0 compatibility.
1da177e4
LT
16 : Added dev_id parameter in net_interrupt(),
17 : request_irq() and free_irq(). Just NULL for now.
18
19 Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
20 : in net_open() and net_close() so kerneld would know
6aa20a22 21 : that the module is in use and wouldn't eject the
1da177e4
LT
22 : driver prematurely.
23
24 Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
25 : as an example. Disabled autoprobing in init_module(),
26 : not a good thing to do to other devices while Linux
27 : is running from all accounts.
6aa20a22 28
1da177e4
LT
29 Alan Cox : Removed 1.2 support, added 2.1 extra counters.
30
31 David Huggins-Daines <dhd@debian.org>
6aa20a22 32
1da177e4
LT
33 Split this off into mac89x0.c, and gutted it of all parts which are
34 not relevant to the existing CS8900 cards on the Macintosh
35 (i.e. basically the Daynaport CS and LC cards). To be precise:
36
37 * Removed all the media-detection stuff, because these cards are
38 TP-only.
39
40 * Lobotomized the ISA interrupt bogosity, because these cards use
41 a hardwired NuBus interrupt and a magic ISAIRQ value in the card.
42
43 * Basically eliminated everything not relevant to getting the
44 cards minimally functioning on the Macintosh.
45
46 I might add that these cards are badly designed even from the Mac
47 standpoint, in that Dayna, in their infinite wisdom, used NuBus slot
48 I/O space and NuBus interrupts for these cards, but neglected to
49 provide anything even remotely resembling a NuBus ROM. Therefore we
50 have to probe for them in a brain-damaged ISA-like fashion.
51
52 Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001
53 check kmalloc and release the allocated memory on failure in
54 mac89x0_probe and in init_module
55 use local_irq_{save,restore}(flags) in net_get_stat, not just
56 local_irq_{dis,en}able()
57*/
58
59static char *version =
60"cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n";
61
62/* ======================= configure the driver here ======================= */
63
64/* use 0 for production, 1 for verification, >2 for debug */
65#ifndef NET_DEBUG
66#define NET_DEBUG 0
67#endif
68
69/* ======================= end of configuration ======================= */
70
71
72/* Always include 'config.h' first in case the user wants to turn on
73 or override something. */
74#include <linux/module.h>
75
1da177e4
LT
76/*
77 Sources:
78
79 Crynwr packet driver epktisa.
80
81 Crystal Semiconductor data sheets.
82
83*/
84
85#include <linux/kernel.h>
86#include <linux/types.h>
87#include <linux/fcntl.h>
88#include <linux/interrupt.h>
89#include <linux/ioport.h>
90#include <linux/in.h>
1da177e4
LT
91#include <linux/string.h>
92#include <linux/nubus.h>
93#include <linux/errno.h>
94#include <linux/init.h>
95#include <linux/netdevice.h>
96#include <linux/etherdevice.h>
97#include <linux/skbuff.h>
98#include <linux/delay.h>
1977f032 99#include <linux/bitops.h>
5a0e3ad6 100#include <linux/gfp.h>
1da177e4
LT
101
102#include <asm/system.h>
1da177e4
LT
103#include <asm/io.h>
104#include <asm/hwtest.h>
105#include <asm/macints.h>
106
107#include "cs89x0.h"
108
109static unsigned int net_debug = NET_DEBUG;
110
111/* Information that need to be kept for each board. */
112struct net_local {
1da177e4
LT
113 int chip_type; /* one of: CS8900, CS8920, CS8920M */
114 char chip_revision; /* revision letter of the chip ('A'...) */
115 int send_cmd; /* the propercommand used to send a packet. */
116 int rx_mode;
117 int curr_rx_cfg;
118 int send_underrun; /* keep track of how many underruns in a row we get */
119 struct sk_buff *skb;
120};
121
122/* Index to functions, as function prototypes. */
123
124#if 0
125extern void reset_chip(struct net_device *dev);
126#endif
127static int net_open(struct net_device *dev);
39ad2cb3 128static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
7d12e780 129static irqreturn_t net_interrupt(int irq, void *dev_id);
1da177e4
LT
130static void set_multicast_list(struct net_device *dev);
131static void net_rx(struct net_device *dev);
132static int net_close(struct net_device *dev);
133static struct net_device_stats *net_get_stats(struct net_device *dev);
134static int set_mac_address(struct net_device *dev, void *addr);
135
136
137/* Example routines you must write ;->. */
138#define tx_done(dev) 1
139
140/* For reading/writing registers ISA-style */
141static inline int
142readreg_io(struct net_device *dev, int portno)
143{
144 nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
145 return swab16(nubus_readw(dev->base_addr + DATA_PORT));
146}
147
148static inline void
149writereg_io(struct net_device *dev, int portno, int value)
150{
151 nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
152 nubus_writew(swab16(value), dev->base_addr + DATA_PORT);
153}
154
155/* These are for reading/writing registers in shared memory */
156static inline int
157readreg(struct net_device *dev, int portno)
158{
159 return swab16(nubus_readw(dev->mem_start + portno));
160}
161
162static inline void
163writereg(struct net_device *dev, int portno, int value)
164{
165 nubus_writew(swab16(value), dev->mem_start + portno);
166}
167
d0174aea
AB
168static const struct net_device_ops mac89x0_netdev_ops = {
169 .ndo_open = net_open,
170 .ndo_stop = net_close,
171 .ndo_start_xmit = net_send_packet,
172 .ndo_get_stats = net_get_stats,
afc4b13d 173 .ndo_set_rx_mode = set_multicast_list,
d0174aea
AB
174 .ndo_set_mac_address = set_mac_address,
175 .ndo_validate_addr = eth_validate_addr,
176 .ndo_change_mtu = eth_change_mtu,
177};
178
1da177e4
LT
179/* Probe for the CS8900 card in slot E. We won't bother looking
180 anywhere else until we have a really good reason to do so. */
181struct net_device * __init mac89x0_probe(int unit)
182{
183 struct net_device *dev;
184 static int once_is_enough;
185 struct net_local *lp;
186 static unsigned version_printed;
187 int i, slot;
188 unsigned rev_type = 0;
189 unsigned long ioaddr;
190 unsigned short sig;
191 int err = -ENODEV;
192
0f734484
GU
193 if (!MACH_IS_MAC)
194 return ERR_PTR(-ENODEV);
195
1da177e4
LT
196 dev = alloc_etherdev(sizeof(struct net_local));
197 if (!dev)
198 return ERR_PTR(-ENOMEM);
199
200 if (unit >= 0) {
201 sprintf(dev->name, "eth%d", unit);
202 netdev_boot_setup_check(dev);
203 }
204
1da177e4
LT
205 if (once_is_enough)
206 goto out;
207 once_is_enough = 1;
208
209 /* We might have to parameterize this later */
210 slot = 0xE;
211 /* Get out now if there's a real NuBus card in slot E */
212 if (nubus_find_slot(slot, NULL) != NULL)
213 goto out;
214
215 /* The pseudo-ISA bits always live at offset 0x300 (gee,
216 wonder why...) */
217 ioaddr = (unsigned long)
218 nubus_slot_addr(slot) | (((slot&0xf) << 20) + DEFAULTIOBASE);
219 {
220 unsigned long flags;
221 int card_present;
6aa20a22 222
1da177e4 223 local_irq_save(flags);
8e95a202
JP
224 card_present = (hwreg_present((void*) ioaddr+4) &&
225 hwreg_present((void*) ioaddr + DATA_PORT));
1da177e4
LT
226 local_irq_restore(flags);
227
228 if (!card_present)
229 goto out;
230 }
231
232 nubus_writew(0, ioaddr + ADD_PORT);
233 sig = nubus_readw(ioaddr + DATA_PORT);
234 if (sig != swab16(CHIP_EISA_ID_SIG))
235 goto out;
236
237 /* Initialize the net_device structure. */
238 lp = netdev_priv(dev);
239
240 /* Fill in the 'dev' fields. */
241 dev->base_addr = ioaddr;
6aa20a22 242 dev->mem_start = (unsigned long)
1da177e4
LT
243 nubus_slot_addr(slot) | (((slot&0xf) << 20) + MMIOBASE);
244 dev->mem_end = dev->mem_start + 0x1000;
245
246 /* Turn on shared memory */
247 writereg_io(dev, PP_BusCTL, MEMORY_ON);
248
249 /* get the chip type */
250 rev_type = readreg(dev, PRODUCT_ID_ADD);
251 lp->chip_type = rev_type &~ REVISON_BITS;
252 lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
253
254 /* Check the chip type and revision in order to set the correct send command
255 CS8920 revision C and CS8900 revision F can use the faster send. */
256 lp->send_cmd = TX_AFTER_381;
257 if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
258 lp->send_cmd = TX_NOW;
259 if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
260 lp->send_cmd = TX_NOW;
261
262 if (net_debug && version_printed++ == 0)
263 printk(version);
264
265 printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#8lx",
266 dev->name,
267 lp->chip_type==CS8900?'0':'2',
268 lp->chip_type==CS8920M?"M":"",
269 lp->chip_revision,
270 dev->base_addr);
271
272 /* Try to read the MAC address */
273 if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) {
274 printk("\nmac89x0: No EEPROM, giving up now.\n");
275 goto out1;
276 } else {
277 for (i = 0; i < ETH_ALEN; i += 2) {
278 /* Big-endian (why??!) */
279 unsigned short s = readreg(dev, PP_IA + i);
280 dev->dev_addr[i] = s >> 8;
281 dev->dev_addr[i+1] = s & 0xff;
282 }
283 }
284
285 dev->irq = SLOT2IRQ(slot);
1da177e4 286
0795af57
JP
287 /* print the IRQ and ethernet address. */
288
e174961c 289 printk(" IRQ %d ADDR %pM\n", dev->irq, dev->dev_addr);
1da177e4 290
d0174aea 291 dev->netdev_ops = &mac89x0_netdev_ops;
1da177e4
LT
292
293 err = register_netdev(dev);
294 if (err)
295 goto out1;
79ea13ce 296 return NULL;
1da177e4
LT
297out1:
298 nubus_writew(0, dev->base_addr + ADD_PORT);
299out:
300 free_netdev(dev);
301 return ERR_PTR(err);
302}
303
304#if 0
305/* This is useful for something, but I don't know what yet. */
306void __init reset_chip(struct net_device *dev)
307{
308 int reset_start_time;
309
310 writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
311
312 /* wait 30 ms */
313 msleep_interruptible(30);
314
315 /* Wait until the chip is reset */
316 reset_start_time = jiffies;
317 while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
318 ;
319}
320#endif
321
322/* Open/initialize the board. This is called (in the current kernel)
323 sometime after booting when the 'ifconfig' program is run.
324
325 This routine should set everything up anew at each open, even
326 registers that "should" only need to be set once at boot, so that
327 there is non-reboot way to recover if something goes wrong.
328 */
329static int
330net_open(struct net_device *dev)
331{
332 struct net_local *lp = netdev_priv(dev);
333 int i;
334
335 /* Disable the interrupt for now */
336 writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) & ~ENABLE_IRQ);
337
338 /* Grab the interrupt */
a0607fd3 339 if (request_irq(dev->irq, net_interrupt, 0, "cs89x0", dev))
1da177e4
LT
340 return -EAGAIN;
341
342 /* Set up the IRQ - Apparently magic */
343 if (lp->chip_type == CS8900)
344 writereg(dev, PP_CS8900_ISAINT, 0);
345 else
346 writereg(dev, PP_CS8920_ISAINT, 0);
347
348 /* set the Ethernet address */
349 for (i=0; i < ETH_ALEN/2; i++)
350 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
351
352 /* Turn on both receive and transmit operations */
353 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
354
355 /* Receive only error free packets addressed to this card */
356 lp->rx_mode = 0;
357 writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
358
359 lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
360
361 writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
362
363 writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
364 TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
365
366 writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
367 TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
368
369 /* now that we've got our act together, enable everything */
370 writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
371 netif_start_queue(dev);
372 return 0;
373}
374
375static int
376net_send_packet(struct sk_buff *skb, struct net_device *dev)
377{
39ad2cb3
MU
378 struct net_local *lp = netdev_priv(dev);
379 unsigned long flags;
1da177e4 380
39ad2cb3
MU
381 if (net_debug > 3)
382 printk("%s: sent %d byte packet of type %x\n",
383 dev->name, skb->len,
384 (skb->data[ETH_ALEN+ETH_ALEN] << 8)
385 | skb->data[ETH_ALEN+ETH_ALEN+1]);
1da177e4 386
39ad2cb3
MU
387 /* keep the upload from being interrupted, since we
388 ask the chip to start transmitting before the
389 whole packet has been completely uploaded. */
390 local_irq_save(flags);
391 netif_stop_queue(dev);
1da177e4 392
39ad2cb3
MU
393 /* initiate a transmit sequence */
394 writereg(dev, PP_TxCMD, lp->send_cmd);
395 writereg(dev, PP_TxLength, skb->len);
1da177e4 396
39ad2cb3
MU
397 /* Test to see if the chip has allocated memory for the packet */
398 if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
399 /* Gasp! It hasn't. But that shouldn't happen since
400 we're waiting for TxOk, so return 1 and requeue this packet. */
1da177e4 401 local_irq_restore(flags);
5b548140 402 return NETDEV_TX_BUSY;
1da177e4 403 }
39ad2cb3
MU
404
405 /* Write the contents of the packet */
406 skb_copy_from_linear_data(skb, (void *)(dev->mem_start + PP_TxFrame),
407 skb->len+1);
408
409 local_irq_restore(flags);
1da177e4
LT
410 dev_kfree_skb (skb);
411
6ed10654 412 return NETDEV_TX_OK;
1da177e4 413}
6aa20a22 414
1da177e4
LT
415/* The typical workload of the driver:
416 Handle the network interface interrupts. */
7d12e780 417static irqreturn_t net_interrupt(int irq, void *dev_id)
1da177e4
LT
418{
419 struct net_device *dev = dev_id;
420 struct net_local *lp;
421 int ioaddr, status;
422
423 if (dev == NULL) {
424 printk ("net_interrupt(): irq %d for unknown device.\n", irq);
425 return IRQ_NONE;
426 }
1da177e4
LT
427
428 ioaddr = dev->base_addr;
429 lp = netdev_priv(dev);
430
431 /* we MUST read all the events out of the ISQ, otherwise we'll never
432 get interrupted again. As a consequence, we can't have any limit
433 on the number of times we loop in the interrupt handler. The
434 hardware guarantees that eventually we'll run out of events. Of
435 course, if you're on a slow machine, and packets are arriving
436 faster than you can read them off, you're screwed. Hasta la
437 vista, baby! */
438 while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) {
439 if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
440 switch(status & ISQ_EVENT_MASK) {
441 case ISQ_RECEIVER_EVENT:
442 /* Got a packet(s). */
443 net_rx(dev);
444 break;
445 case ISQ_TRANSMITTER_EVENT:
174afef4 446 dev->stats.tx_packets++;
39ad2cb3 447 netif_wake_queue(dev);
174afef4
KV
448 if ((status & TX_OK) == 0)
449 dev->stats.tx_errors++;
450 if (status & TX_LOST_CRS)
451 dev->stats.tx_carrier_errors++;
452 if (status & TX_SQE_ERROR)
453 dev->stats.tx_heartbeat_errors++;
454 if (status & TX_LATE_COL)
455 dev->stats.tx_window_errors++;
456 if (status & TX_16_COL)
457 dev->stats.tx_aborted_errors++;
1da177e4
LT
458 break;
459 case ISQ_BUFFER_EVENT:
460 if (status & READY_FOR_TX) {
461 /* we tried to transmit a packet earlier,
462 but inexplicably ran out of buffers.
463 That shouldn't happen since we only ever
464 load one packet. Shrug. Do the right
465 thing anyway. */
39ad2cb3 466 netif_wake_queue(dev);
1da177e4
LT
467 }
468 if (status & TX_UNDERRUN) {
469 if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
470 lp->send_underrun++;
471 if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
472 else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
473 }
474 break;
475 case ISQ_RX_MISS_EVENT:
174afef4 476 dev->stats.rx_missed_errors += (status >> 6);
1da177e4
LT
477 break;
478 case ISQ_TX_COL_EVENT:
174afef4 479 dev->stats.collisions += (status >> 6);
1da177e4
LT
480 break;
481 }
482 }
1da177e4
LT
483 return IRQ_HANDLED;
484}
485
486/* We have a good packet(s), get it/them out of the buffers. */
487static void
488net_rx(struct net_device *dev)
489{
1da177e4
LT
490 struct sk_buff *skb;
491 int status, length;
492
493 status = readreg(dev, PP_RxStatus);
494 if ((status & RX_OK) == 0) {
174afef4
KV
495 dev->stats.rx_errors++;
496 if (status & RX_RUNT)
497 dev->stats.rx_length_errors++;
498 if (status & RX_EXTRA_DATA)
499 dev->stats.rx_length_errors++;
500 if ((status & RX_CRC_ERROR) &&
501 !(status & (RX_EXTRA_DATA|RX_RUNT)))
1da177e4 502 /* per str 172 */
174afef4
KV
503 dev->stats.rx_crc_errors++;
504 if (status & RX_DRIBBLE)
505 dev->stats.rx_frame_errors++;
1da177e4
LT
506 return;
507 }
508
509 length = readreg(dev, PP_RxLength);
510 /* Malloc up new buffer. */
511 skb = alloc_skb(length, GFP_ATOMIC);
512 if (skb == NULL) {
513 printk("%s: Memory squeeze, dropping packet.\n", dev->name);
174afef4 514 dev->stats.rx_dropped++;
1da177e4
LT
515 return;
516 }
517 skb_put(skb, length);
1da177e4 518
39ad2cb3
MU
519 skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
520 length);
1da177e4
LT
521
522 if (net_debug > 3)printk("%s: received %d byte packet of type %x\n",
523 dev->name, length,
524 (skb->data[ETH_ALEN+ETH_ALEN] << 8)
525 | skb->data[ETH_ALEN+ETH_ALEN+1]);
526
527 skb->protocol=eth_type_trans(skb,dev);
528 netif_rx(skb);
174afef4
KV
529 dev->stats.rx_packets++;
530 dev->stats.rx_bytes += length;
1da177e4
LT
531}
532
533/* The inverse routine to net_open(). */
534static int
535net_close(struct net_device *dev)
536{
537
538 writereg(dev, PP_RxCFG, 0);
539 writereg(dev, PP_TxCFG, 0);
540 writereg(dev, PP_BufCFG, 0);
541 writereg(dev, PP_BusCTL, 0);
542
543 netif_stop_queue(dev);
544
545 free_irq(dev->irq, dev);
546
547 /* Update the statistics here. */
548
549 return 0;
550
551}
552
553/* Get the current statistics. This may be called with the card open or
554 closed. */
555static struct net_device_stats *
556net_get_stats(struct net_device *dev)
557{
1da177e4
LT
558 unsigned long flags;
559
560 local_irq_save(flags);
561 /* Update the statistics from the device registers. */
174afef4
KV
562 dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
563 dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
1da177e4
LT
564 local_irq_restore(flags);
565
174afef4 566 return &dev->stats;
1da177e4
LT
567}
568
569static void set_multicast_list(struct net_device *dev)
570{
571 struct net_local *lp = netdev_priv(dev);
572
573 if(dev->flags&IFF_PROMISC)
574 {
575 lp->rx_mode = RX_ALL_ACCEPT;
f9dcbcc9 576 } else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
1da177e4
LT
577 /* The multicast-accept list is initialized to accept-all, and we
578 rely on higher-level filtering for now. */
579 lp->rx_mode = RX_MULTCAST_ACCEPT;
6aa20a22 580 }
1da177e4
LT
581 else
582 lp->rx_mode = 0;
583
584 writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
585
586 /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
587 writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
588 (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
589}
590
591
592static int set_mac_address(struct net_device *dev, void *addr)
593{
594 int i;
1da177e4
LT
595 printk("%s: Setting MAC address to ", dev->name);
596 for (i = 0; i < 6; i++)
597 printk(" %2.2x", dev->dev_addr[i] = ((unsigned char *)addr)[i]);
598 printk(".\n");
599 /* set the Ethernet address */
600 for (i=0; i < ETH_ALEN/2; i++)
601 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
602
603 return 0;
604}
605
606#ifdef MODULE
607
608static struct net_device *dev_cs89x0;
609static int debug;
610
8d3b33f6 611module_param(debug, int, 0);
1da177e4
LT
612MODULE_PARM_DESC(debug, "CS89[02]0 debug level (0-5)");
613MODULE_LICENSE("GPL");
614
446df4c1 615int __init
1da177e4
LT
616init_module(void)
617{
618 net_debug = debug;
619 dev_cs89x0 = mac89x0_probe(-1);
620 if (IS_ERR(dev_cs89x0)) {
621 printk(KERN_WARNING "mac89x0.c: No card found\n");
622 return PTR_ERR(dev_cs89x0);
623 }
624 return 0;
625}
626
627void
628cleanup_module(void)
629{
630 unregister_netdev(dev_cs89x0);
631 nubus_writew(0, dev_cs89x0->base_addr + ADD_PORT);
632 free_netdev(dev_cs89x0);
633}
634#endif /* MODULE */