]>
Commit | Line | Data |
---|---|---|
b2441318 | 1 | /* SPDX-License-Identifier: GPL-2.0 */ |
52dfc830 MR |
2 | #ifndef _NB8800_H_ |
3 | #define _NB8800_H_ | |
4 | ||
5 | #include <linux/types.h> | |
6 | #include <linux/skbuff.h> | |
7 | #include <linux/phy.h> | |
8 | #include <linux/clk.h> | |
9 | #include <linux/bitops.h> | |
10 | ||
11 | #define RX_DESC_COUNT 256 | |
12 | #define TX_DESC_COUNT 256 | |
13 | ||
14 | #define NB8800_DESC_LOW 4 | |
15 | ||
16 | #define RX_BUF_SIZE 1552 | |
17 | ||
18 | #define RX_COPYBREAK 256 | |
19 | #define RX_COPYHDR 128 | |
20 | ||
21 | #define MAX_MDC_CLOCK 2500000 | |
22 | ||
23 | /* Stargate Solutions SSN8800 core registers */ | |
24 | #define NB8800_TX_CTL1 0x000 | |
25 | #define TX_TPD BIT(5) | |
26 | #define TX_APPEND_FCS BIT(4) | |
27 | #define TX_PAD_EN BIT(3) | |
28 | #define TX_RETRY_EN BIT(2) | |
29 | #define TX_EN BIT(0) | |
30 | ||
31 | #define NB8800_TX_CTL2 0x001 | |
32 | ||
33 | #define NB8800_RX_CTL 0x004 | |
34 | #define RX_BC_DISABLE BIT(7) | |
35 | #define RX_RUNT BIT(6) | |
36 | #define RX_AF_EN BIT(5) | |
37 | #define RX_PAUSE_EN BIT(3) | |
38 | #define RX_SEND_CRC BIT(2) | |
39 | #define RX_PAD_STRIP BIT(1) | |
40 | #define RX_EN BIT(0) | |
41 | ||
42 | #define NB8800_RANDOM_SEED 0x008 | |
43 | #define NB8800_TX_SDP 0x14 | |
44 | #define NB8800_TX_TPDP1 0x18 | |
45 | #define NB8800_TX_TPDP2 0x19 | |
46 | #define NB8800_SLOT_TIME 0x1c | |
47 | ||
48 | #define NB8800_MDIO_CMD 0x020 | |
49 | #define MDIO_CMD_GO BIT(31) | |
50 | #define MDIO_CMD_WR BIT(26) | |
51 | #define MDIO_CMD_ADDR(x) ((x) << 21) | |
52 | #define MDIO_CMD_REG(x) ((x) << 16) | |
53 | #define MDIO_CMD_DATA(x) ((x) << 0) | |
54 | ||
55 | #define NB8800_MDIO_STS 0x024 | |
56 | #define MDIO_STS_ERR BIT(31) | |
57 | ||
58 | #define NB8800_MC_ADDR(i) (0x028 + (i)) | |
59 | #define NB8800_MC_INIT 0x02e | |
60 | #define NB8800_UC_ADDR(i) (0x03c + (i)) | |
61 | ||
62 | #define NB8800_MAC_MODE 0x044 | |
63 | #define RGMII_MODE BIT(7) | |
64 | #define HALF_DUPLEX BIT(4) | |
65 | #define BURST_EN BIT(3) | |
66 | #define LOOPBACK_EN BIT(2) | |
67 | #define GMAC_MODE BIT(0) | |
68 | ||
69 | #define NB8800_IC_THRESHOLD 0x050 | |
70 | #define NB8800_PE_THRESHOLD 0x051 | |
71 | #define NB8800_PF_THRESHOLD 0x052 | |
72 | #define NB8800_TX_BUFSIZE 0x054 | |
73 | #define NB8800_FIFO_CTL 0x056 | |
74 | #define NB8800_PQ1 0x060 | |
75 | #define NB8800_PQ2 0x061 | |
76 | #define NB8800_SRC_ADDR(i) (0x06a + (i)) | |
77 | #define NB8800_STAT_DATA 0x078 | |
78 | #define NB8800_STAT_INDEX 0x07c | |
79 | #define NB8800_STAT_CLEAR 0x07d | |
80 | ||
81 | #define NB8800_SLEEP_MODE 0x07e | |
82 | #define SLEEP_MODE BIT(0) | |
83 | ||
84 | #define NB8800_WAKEUP 0x07f | |
85 | #define WAKEUP BIT(0) | |
86 | ||
87 | /* Aurora NB8800 host interface registers */ | |
88 | #define NB8800_TXC_CR 0x100 | |
89 | #define TCR_LK BIT(12) | |
90 | #define TCR_DS BIT(11) | |
91 | #define TCR_BTS(x) (((x) & 0x7) << 8) | |
92 | #define TCR_DIE BIT(7) | |
93 | #define TCR_TFI(x) (((x) & 0x7) << 4) | |
94 | #define TCR_LE BIT(3) | |
95 | #define TCR_RS BIT(2) | |
96 | #define TCR_DM BIT(1) | |
97 | #define TCR_EN BIT(0) | |
98 | ||
99 | #define NB8800_TXC_SR 0x104 | |
100 | #define TSR_DE BIT(3) | |
101 | #define TSR_DI BIT(2) | |
102 | #define TSR_TO BIT(1) | |
103 | #define TSR_TI BIT(0) | |
104 | ||
105 | #define NB8800_TX_SAR 0x108 | |
106 | #define NB8800_TX_DESC_ADDR 0x10c | |
107 | ||
108 | #define NB8800_TX_REPORT_ADDR 0x110 | |
109 | #define TX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xffff) | |
110 | #define TX_FIRST_DEFERRAL BIT(7) | |
111 | #define TX_EARLY_COLLISIONS(x) (((x) >> 3) & 0xf) | |
112 | #define TX_LATE_COLLISION BIT(2) | |
113 | #define TX_PACKET_DROPPED BIT(1) | |
114 | #define TX_FIFO_UNDERRUN BIT(0) | |
115 | #define IS_TX_ERROR(r) ((r) & 0x07) | |
116 | ||
117 | #define NB8800_TX_FIFO_SR 0x114 | |
118 | #define NB8800_TX_ITR 0x118 | |
119 | ||
120 | #define NB8800_RXC_CR 0x200 | |
121 | #define RCR_FL BIT(13) | |
122 | #define RCR_LK BIT(12) | |
123 | #define RCR_DS BIT(11) | |
124 | #define RCR_BTS(x) (((x) & 7) << 8) | |
125 | #define RCR_DIE BIT(7) | |
126 | #define RCR_RFI(x) (((x) & 7) << 4) | |
127 | #define RCR_LE BIT(3) | |
128 | #define RCR_RS BIT(2) | |
129 | #define RCR_DM BIT(1) | |
130 | #define RCR_EN BIT(0) | |
131 | ||
132 | #define NB8800_RXC_SR 0x204 | |
133 | #define RSR_DE BIT(3) | |
134 | #define RSR_DI BIT(2) | |
135 | #define RSR_RO BIT(1) | |
136 | #define RSR_RI BIT(0) | |
137 | ||
138 | #define NB8800_RX_SAR 0x208 | |
139 | #define NB8800_RX_DESC_ADDR 0x20c | |
140 | ||
141 | #define NB8800_RX_REPORT_ADDR 0x210 | |
142 | #define RX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xFFFF) | |
143 | #define RX_MULTICAST_PKT BIT(9) | |
144 | #define RX_BROADCAST_PKT BIT(8) | |
145 | #define RX_LENGTH_ERR BIT(7) | |
146 | #define RX_FCS_ERR BIT(6) | |
147 | #define RX_RUNT_PKT BIT(5) | |
148 | #define RX_FIFO_OVERRUN BIT(4) | |
149 | #define RX_LATE_COLLISION BIT(3) | |
150 | #define RX_ALIGNMENT_ERROR BIT(2) | |
151 | #define RX_ERROR_MASK 0xfc | |
152 | #define IS_RX_ERROR(r) ((r) & RX_ERROR_MASK) | |
153 | ||
154 | #define NB8800_RX_FIFO_SR 0x214 | |
155 | #define NB8800_RX_ITR 0x218 | |
156 | ||
157 | /* Sigma Designs SMP86xx additional registers */ | |
158 | #define NB8800_TANGOX_PAD_MODE 0x400 | |
159 | #define PAD_MODE_MASK 0x7 | |
160 | #define PAD_MODE_MII 0x0 | |
161 | #define PAD_MODE_RGMII 0x1 | |
162 | #define PAD_MODE_GTX_CLK_INV BIT(3) | |
163 | #define PAD_MODE_GTX_CLK_DELAY BIT(4) | |
164 | ||
165 | #define NB8800_TANGOX_MDIO_CLKDIV 0x420 | |
166 | #define NB8800_TANGOX_RESET 0x424 | |
167 | ||
168 | /* Hardware DMA descriptor */ | |
169 | struct nb8800_dma_desc { | |
170 | u32 s_addr; /* start address */ | |
171 | u32 n_addr; /* next descriptor address */ | |
172 | u32 r_addr; /* report address */ | |
173 | u32 config; | |
174 | } __aligned(8); | |
175 | ||
176 | #define DESC_ID BIT(23) | |
177 | #define DESC_EOC BIT(22) | |
178 | #define DESC_EOF BIT(21) | |
179 | #define DESC_LK BIT(20) | |
180 | #define DESC_DS BIT(19) | |
181 | #define DESC_BTS(x) (((x) & 0x7) << 16) | |
182 | ||
183 | /* DMA descriptor and associated data for rx. | |
184 | * Allocated from coherent memory. | |
185 | */ | |
186 | struct nb8800_rx_desc { | |
187 | /* DMA descriptor */ | |
188 | struct nb8800_dma_desc desc; | |
189 | ||
190 | /* Status report filled in by hardware */ | |
191 | u32 report; | |
192 | }; | |
193 | ||
194 | /* Address of buffer on rx ring */ | |
195 | struct nb8800_rx_buf { | |
196 | struct page *page; | |
197 | unsigned long offset; | |
198 | }; | |
199 | ||
200 | /* DMA descriptors and associated data for tx. | |
201 | * Allocated from coherent memory. | |
202 | */ | |
203 | struct nb8800_tx_desc { | |
204 | /* DMA descriptor. The second descriptor is used if packet | |
205 | * data is unaligned. | |
206 | */ | |
207 | struct nb8800_dma_desc desc[2]; | |
208 | ||
209 | /* Status report filled in by hardware */ | |
210 | u32 report; | |
211 | ||
212 | /* Bounce buffer for initial unaligned part of packet */ | |
213 | u8 buf[8] __aligned(8); | |
214 | }; | |
215 | ||
216 | /* Packet in tx queue */ | |
217 | struct nb8800_tx_buf { | |
218 | /* Currently queued skb */ | |
219 | struct sk_buff *skb; | |
220 | ||
221 | /* DMA address of the first descriptor */ | |
222 | dma_addr_t dma_desc; | |
223 | ||
224 | /* DMA address of packet data */ | |
225 | dma_addr_t dma_addr; | |
226 | ||
227 | /* Length of DMA mapping, less than skb->len if alignment | |
228 | * buffer is used. | |
229 | */ | |
230 | unsigned int dma_len; | |
231 | ||
232 | /* Number of packets in chain starting here */ | |
233 | unsigned int chain_len; | |
234 | ||
235 | /* Packet chain ready to be submitted to hardware */ | |
236 | bool ready; | |
237 | }; | |
238 | ||
239 | struct nb8800_priv { | |
240 | struct napi_struct napi; | |
241 | ||
242 | void __iomem *base; | |
243 | ||
244 | /* RX DMA descriptors */ | |
245 | struct nb8800_rx_desc *rx_descs; | |
246 | ||
247 | /* RX buffers referenced by DMA descriptors */ | |
248 | struct nb8800_rx_buf *rx_bufs; | |
249 | ||
250 | /* Current end of chain */ | |
251 | u32 rx_eoc; | |
252 | ||
253 | /* Value for rx interrupt time register in NAPI interrupt mode */ | |
254 | u32 rx_itr_irq; | |
255 | ||
256 | /* Value for rx interrupt time register in NAPI poll mode */ | |
257 | u32 rx_itr_poll; | |
258 | ||
259 | /* Value for config field of rx DMA descriptors */ | |
260 | u32 rx_dma_config; | |
261 | ||
262 | /* TX DMA descriptors */ | |
263 | struct nb8800_tx_desc *tx_descs; | |
264 | ||
265 | /* TX packet queue */ | |
266 | struct nb8800_tx_buf *tx_bufs; | |
267 | ||
268 | /* Number of free tx queue entries */ | |
269 | atomic_t tx_free; | |
270 | ||
271 | /* First free tx queue entry */ | |
272 | u32 tx_next; | |
273 | ||
274 | /* Next buffer to transmit */ | |
275 | u32 tx_queue; | |
276 | ||
277 | /* Start of current packet chain */ | |
278 | struct nb8800_tx_buf *tx_chain; | |
279 | ||
280 | /* Next buffer to reclaim */ | |
281 | u32 tx_done; | |
282 | ||
283 | /* Lock for DMA activation */ | |
284 | spinlock_t tx_lock; | |
285 | ||
286 | struct mii_bus *mii_bus; | |
287 | struct device_node *phy_node; | |
52dfc830 MR |
288 | |
289 | /* PHY connection type from DT */ | |
0c65b2b9 | 290 | phy_interface_t phy_mode; |
52dfc830 MR |
291 | |
292 | /* Current link status */ | |
293 | int speed; | |
294 | int duplex; | |
295 | int link; | |
296 | ||
297 | /* Pause settings */ | |
298 | bool pause_aneg; | |
299 | bool pause_rx; | |
300 | bool pause_tx; | |
301 | ||
302 | /* DMA base address of rx descriptors, see rx_descs above */ | |
303 | dma_addr_t rx_desc_dma; | |
304 | ||
305 | /* DMA base address of tx descriptors, see tx_descs above */ | |
306 | dma_addr_t tx_desc_dma; | |
307 | ||
308 | struct clk *clk; | |
309 | }; | |
310 | ||
311 | struct nb8800_ops { | |
312 | int (*init)(struct net_device *dev); | |
313 | int (*reset)(struct net_device *dev); | |
314 | }; | |
315 | ||
316 | #endif /* _NB8800_H_ */ |