[mirror_ubuntu-jammy-kernel.git] / drivers / net / ethernet / broadcom / Kconfig

#
# Broadcom device configuration
#

config NET_VENDOR_BROADCOM
	bool "Broadcom devices"
	default y
	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
		   SIBYTE_SB1xxx_SOC
	---help---
	  If you have a network (Ethernet) chipset belonging to this class,
	  say Y.

	  Note that the answer to this question does not directly affect
	  the kernel: saying N will just case the configurator to skip all
	  the questions regarding AMD chipsets. If you say Y, you will be asked
	  for your specific chipset/driver in the following questions.

if NET_VENDOR_BROADCOM

config B44
	tristate "Broadcom 440x/47xx ethernet support"
	depends on SSB_POSSIBLE && HAS_DMA
	select SSB
	select MII
	select PHYLIB
	---help---
	  If you have a network (Ethernet) controller of this type, say Y
	  or M and read the Ethernet-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here. The module
	  will be called b44.

# Auto-select SSB PCI-HOST support, if possible
config B44_PCI_AUTOSELECT
	bool
	depends on B44 && SSB_PCIHOST_POSSIBLE
	select SSB_PCIHOST
	default y

# Auto-select SSB PCICORE driver, if possible
config B44_PCICORE_AUTOSELECT
	bool
	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
	select SSB_DRIVER_PCICORE
	default y

config B44_PCI
	bool
	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
	default y

config BCM63XX_ENET
	tristate "Broadcom 63xx internal mac support"
	depends on BCM63XX
	select MII
	select PHYLIB
	help
	  This driver supports the ethernet MACs in the Broadcom 63xx
	  MIPS chipset family (BCM63XX).

config BCMGENET
	tristate "Broadcom GENET internal MAC support"
	depends on OF
	select MII
	select PHYLIB
	select FIXED_PHY if BCMGENET=y
	select BCM7XXX_PHY
	help
	  This driver supports the built-in Ethernet MACs found in the
	  Broadcom BCM7xxx Set Top Box family chipset.

config BNX2
	tristate "Broadcom NetXtremeII support"
	depends on PCI
	select CRC32
	select FW_LOADER
	---help---
	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called bnx2.  This is recommended.

config CNIC
	tristate "Broadcom CNIC support"
	depends on PCI
	select BNX2
	select UIO
	---help---
	  This driver supports offload features of Broadcom NetXtremeII
	  gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called cnic.  This is recommended.

config SB1250_MAC
	tristate "SB1250 Gigabit Ethernet support"
	depends on SIBYTE_SB1xxx_SOC
	select PHYLIB
	---help---
	  This driver supports Gigabit Ethernet interfaces based on the
	  Broadcom SiByte family of System-On-a-Chip parts.  They include
	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
	  and BCM1480 chips.

	  To compile this driver as a module, choose M here: the module
	  will be called sb1250-mac.

config TIGON3
	tristate "Broadcom Tigon3 support"
	depends on PCI
	select PHYLIB
	select HWMON
	select PTP_1588_CLOCK
	---help---
	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called tg3.  This is recommended.

config BNX2X
	tristate "Broadcom NetXtremeII 10Gb support"
	depends on PCI
	select FW_LOADER
	select ZLIB_INFLATE
	select LIBCRC32C
	select MDIO
	---help---
	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
	  To compile this driver as a module, choose M here: the module
	  will be called bnx2x.  This is recommended.

config BNX2X_SRIOV
	bool "Broadcom 578xx and 57712 SR-IOV support"
	depends on BNX2X && PCI_IOV
	default y
	---help---
	  This configuration parameter enables Single Root Input Output
	  Virtualization support in the 578xx and 57712 products. This
	  allows for virtual function acceleration in virtual environments.

config BGMAC
	tristate "BCMA bus GBit core support"
	depends on BCMA_HOST_SOC && HAS_DMA && BCM47XX
	select PHYLIB
	---help---
	  This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
	  They can be found on BCM47xx SoCs and provide gigabit ethernet.
	  In case of using this driver on BCM4706 it's also requires to enable
	  BCMA_DRIVER_GMAC_CMN to make it work.

endif # NET_VENDOR_BROADCOM
Commit	Line	Data
adfc5217 JK	1	#
	2	# Broadcom device configuration
	3	#
	4
	5	config NET_VENDOR_BROADCOM
	6	bool "Broadcom devices"
88f07484	7	default y
adfc5217 JK	8	depends on (SSB_POSSIBLE && HAS_DMA) \|\| PCI \|\| BCM63XX \|\| \
	9	SIBYTE_SB1xxx_SOC
	10	---help---
	11	If you have a network (Ethernet) chipset belonging to this class,
	12	say Y.
	13
	14	Note that the answer to this question does not directly affect
	15	the kernel: saying N will just case the configurator to skip all
	16	the questions regarding AMD chipsets. If you say Y, you will be asked
	17	for your specific chipset/driver in the following questions.
	18
	19	if NET_VENDOR_BROADCOM
	20
	21	config B44
	22	tristate "Broadcom 440x/47xx ethernet support"
	23	depends on SSB_POSSIBLE && HAS_DMA
	24	select SSB
	25	select MII
86f4ea63	26	select PHYLIB
adfc5217 JK	27	---help---
	28	If you have a network (Ethernet) controller of this type, say Y
	29	or M and read the Ethernet-HOWTO, available from
	30	<http://www.tldp.org/docs.html#howto>.
	31
	32	To compile this driver as a module, choose M here. The module
	33	will be called b44.
	34
	35	# Auto-select SSB PCI-HOST support, if possible
	36	config B44_PCI_AUTOSELECT
	37	bool
	38	depends on B44 && SSB_PCIHOST_POSSIBLE
	39	select SSB_PCIHOST
	40	default y
	41
	42	# Auto-select SSB PCICORE driver, if possible
	43	config B44_PCICORE_AUTOSELECT
	44	bool
	45	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
	46	select SSB_DRIVER_PCICORE
	47	default y
	48
	49	config B44_PCI
	50	bool
	51	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
	52	default y
	53
	54	config BCM63XX_ENET
	55	tristate "Broadcom 63xx internal mac support"
	56	depends on BCM63XX
	57	select MII
	58	select PHYLIB
	59	help
	60	This driver supports the ethernet MACs in the Broadcom 63xx
	61	MIPS chipset family (BCM63XX).
	62
bdaa53bd FF	63	config BCMGENET
	64	tristate "Broadcom GENET internal MAC support"
	65	depends on OF
	66	select MII
	67	select PHYLIB
	68	select FIXED_PHY if BCMGENET=y
	69	select BCM7XXX_PHY
	70	help
	71	This driver supports the built-in Ethernet MACs found in the
	72	Broadcom BCM7xxx Set Top Box family chipset.
	73
adfc5217 JK	74	config BNX2
	75	tristate "Broadcom NetXtremeII support"
	76	depends on PCI
	77	select CRC32
	78	select FW_LOADER
	79	---help---
	80	This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
	81
	82	To compile this driver as a module, choose M here: the module
	83	will be called bnx2. This is recommended.
	84
	85	config CNIC
	86	tristate "Broadcom CNIC support"
	87	depends on PCI
	88	select BNX2
	89	select UIO
	90	---help---
	91	This driver supports offload features of Broadcom NetXtremeII
	92	gigabit Ethernet cards.
	93
	94	To compile this driver as a module, choose M here: the module
	95	will be called cnic. This is recommended.
	96
	97	config SB1250_MAC
	98	tristate "SB1250 Gigabit Ethernet support"
	99	depends on SIBYTE_SB1xxx_SOC
	100	select PHYLIB
	101	---help---
	102	This driver supports Gigabit Ethernet interfaces based on the
	103	Broadcom SiByte family of System-On-a-Chip parts. They include
	104	the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
	105	and BCM1480 chips.
	106
	107	To compile this driver as a module, choose M here: the module
	108	will be called sb1250-mac.
	109
	110	config TIGON3
	111	tristate "Broadcom Tigon3 support"
	112	depends on PCI
	113	select PHYLIB
de0a4148	114	select HWMON
be947307	115	select PTP_1588_CLOCK
adfc5217 JK	116	---help---
	117	This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
	118
	119	To compile this driver as a module, choose M here: the module
	120	will be called tg3. This is recommended.
	121
	122	config BNX2X
	123	tristate "Broadcom NetXtremeII 10Gb support"
	124	depends on PCI
	125	select FW_LOADER
	126	select ZLIB_INFLATE
	127	select LIBCRC32C
	128	select MDIO
	129	---help---
	130	This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
	131	To compile this driver as a module, choose M here: the module
	132	will be called bnx2x. This is recommended.
	133
6411280a AE	134	config BNX2X_SRIOV
	135	bool "Broadcom 578xx and 57712 SR-IOV support"
	136	depends on BNX2X && PCI_IOV
	137	default y
	138	---help---
	139	This configuration parameter enables Single Root Input Output
	140	Virtualization support in the 578xx and 57712 products. This
	141	allows for virtual function acceleration in virtual environments.
	142
dd4544f0 RM	143	config BGMAC
dd4544f0 RM	144	tristate "BCMA bus GBit core support"
72bb2f26	145	depends on BCMA_HOST_SOC && HAS_DMA && BCM47XX
31bd2977	146	select PHYLIB
dd4544f0 RM	147	---help---
	148	This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
	149	They can be found on BCM47xx SoCs and provide gigabit ethernet.
	150	In case of using this driver on BCM4706 it's also requires to enable
	151	BCMA_DRIVER_GMAC_CMN to make it work.
	152
adfc5217	153	endif # NET_VENDOR_BROADCOM