]>
Commit | Line | Data |
---|---|---|
be839e39 CL |
1 | /* |
2 | * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet | |
3 | * driver for Linux. | |
4 | * | |
5 | * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. | |
6 | * | |
7 | * This software is available to you under a choice of one of two | |
8 | * licenses. You may choose to be licensed under the terms of the GNU | |
9 | * General Public License (GPL) Version 2, available from the file | |
10 | * COPYING in the main directory of this source tree, or the | |
11 | * OpenIB.org BSD license below: | |
12 | * | |
13 | * Redistribution and use in source and binary forms, with or | |
14 | * without modification, are permitted provided that the following | |
15 | * conditions are met: | |
16 | * | |
17 | * - Redistributions of source code must retain the above | |
18 | * copyright notice, this list of conditions and the following | |
19 | * disclaimer. | |
20 | * | |
21 | * - Redistributions in binary form must reproduce the above | |
22 | * copyright notice, this list of conditions and the following | |
23 | * disclaimer in the documentation and/or other materials | |
24 | * provided with the distribution. | |
25 | * | |
26 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
27 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | |
28 | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
29 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | |
30 | * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | |
31 | * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
32 | * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | |
33 | * SOFTWARE. | |
34 | */ | |
35 | ||
428ac43f JP |
36 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
37 | ||
be839e39 CL |
38 | #include <linux/module.h> |
39 | #include <linux/moduleparam.h> | |
40 | #include <linux/init.h> | |
41 | #include <linux/pci.h> | |
42 | #include <linux/dma-mapping.h> | |
43 | #include <linux/netdevice.h> | |
44 | #include <linux/etherdevice.h> | |
45 | #include <linux/debugfs.h> | |
46 | #include <linux/ethtool.h> | |
5ad24def | 47 | #include <linux/mdio.h> |
be839e39 CL |
48 | |
49 | #include "t4vf_common.h" | |
50 | #include "t4vf_defs.h" | |
51 | ||
52 | #include "../cxgb4/t4_regs.h" | |
53 | #include "../cxgb4/t4_msg.h" | |
54 | ||
55 | /* | |
56 | * Generic information about the driver. | |
57 | */ | |
622c62b5 SR |
58 | #define DRV_VERSION "2.0.0-ko" |
59 | #define DRV_DESC "Chelsio T4/T5 Virtual Function (VF) Network Driver" | |
be839e39 CL |
60 | |
61 | /* | |
62 | * Module Parameters. | |
63 | * ================== | |
64 | */ | |
65 | ||
66 | /* | |
67 | * Default ethtool "message level" for adapters. | |
68 | */ | |
69 | #define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ | |
70 | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ | |
71 | NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) | |
72 | ||
73 | static int dflt_msg_enable = DFLT_MSG_ENABLE; | |
74 | ||
75 | module_param(dflt_msg_enable, int, 0644); | |
76 | MODULE_PARM_DESC(dflt_msg_enable, | |
77 | "default adapter ethtool message level bitmap"); | |
78 | ||
79 | /* | |
80 | * The driver uses the best interrupt scheme available on a platform in the | |
81 | * order MSI-X then MSI. This parameter determines which of these schemes the | |
82 | * driver may consider as follows: | |
83 | * | |
84 | * msi = 2: choose from among MSI-X and MSI | |
85 | * msi = 1: only consider MSI interrupts | |
86 | * | |
87 | * Note that unlike the Physical Function driver, this Virtual Function driver | |
88 | * does _not_ support legacy INTx interrupts (this limitation is mandated by | |
89 | * the PCI-E SR-IOV standard). | |
90 | */ | |
91 | #define MSI_MSIX 2 | |
92 | #define MSI_MSI 1 | |
93 | #define MSI_DEFAULT MSI_MSIX | |
94 | ||
95 | static int msi = MSI_DEFAULT; | |
96 | ||
97 | module_param(msi, int, 0644); | |
98 | MODULE_PARM_DESC(msi, "whether to use MSI-X or MSI"); | |
99 | ||
100 | /* | |
101 | * Fundamental constants. | |
102 | * ====================== | |
103 | */ | |
104 | ||
105 | enum { | |
106 | MAX_TXQ_ENTRIES = 16384, | |
107 | MAX_RSPQ_ENTRIES = 16384, | |
108 | MAX_RX_BUFFERS = 16384, | |
109 | ||
110 | MIN_TXQ_ENTRIES = 32, | |
111 | MIN_RSPQ_ENTRIES = 128, | |
112 | MIN_FL_ENTRIES = 16, | |
113 | ||
114 | /* | |
115 | * For purposes of manipulating the Free List size we need to | |
116 | * recognize that Free Lists are actually Egress Queues (the host | |
117 | * produces free buffers which the hardware consumes), Egress Queues | |
118 | * indices are all in units of Egress Context Units bytes, and free | |
119 | * list entries are 64-bit PCI DMA addresses. And since the state of | |
120 | * the Producer Index == the Consumer Index implies an EMPTY list, we | |
121 | * always have at least one Egress Unit's worth of Free List entries | |
122 | * unused. See sge.c for more details ... | |
123 | */ | |
124 | EQ_UNIT = SGE_EQ_IDXSIZE, | |
125 | FL_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64), | |
126 | MIN_FL_RESID = FL_PER_EQ_UNIT, | |
127 | }; | |
128 | ||
129 | /* | |
130 | * Global driver state. | |
131 | * ==================== | |
132 | */ | |
133 | ||
134 | static struct dentry *cxgb4vf_debugfs_root; | |
135 | ||
136 | /* | |
137 | * OS "Callback" functions. | |
138 | * ======================== | |
139 | */ | |
140 | ||
141 | /* | |
142 | * The link status has changed on the indicated "port" (Virtual Interface). | |
143 | */ | |
144 | void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok) | |
145 | { | |
146 | struct net_device *dev = adapter->port[pidx]; | |
147 | ||
148 | /* | |
149 | * If the port is disabled or the current recorded "link up" | |
150 | * status matches the new status, just return. | |
151 | */ | |
152 | if (!netif_running(dev) || link_ok == netif_carrier_ok(dev)) | |
153 | return; | |
154 | ||
155 | /* | |
156 | * Tell the OS that the link status has changed and print a short | |
157 | * informative message on the console about the event. | |
158 | */ | |
159 | if (link_ok) { | |
160 | const char *s; | |
161 | const char *fc; | |
162 | const struct port_info *pi = netdev_priv(dev); | |
163 | ||
164 | netif_carrier_on(dev); | |
165 | ||
166 | switch (pi->link_cfg.speed) { | |
897d55df HS |
167 | case 40000: |
168 | s = "40Gbps"; | |
169 | break; | |
170 | ||
171 | case 10000: | |
be839e39 CL |
172 | s = "10Gbps"; |
173 | break; | |
174 | ||
897d55df | 175 | case 1000: |
be839e39 CL |
176 | s = "1000Mbps"; |
177 | break; | |
178 | ||
897d55df | 179 | case 100: |
be839e39 CL |
180 | s = "100Mbps"; |
181 | break; | |
182 | ||
183 | default: | |
184 | s = "unknown"; | |
185 | break; | |
186 | } | |
187 | ||
188 | switch (pi->link_cfg.fc) { | |
189 | case PAUSE_RX: | |
190 | fc = "RX"; | |
191 | break; | |
192 | ||
193 | case PAUSE_TX: | |
194 | fc = "TX"; | |
195 | break; | |
196 | ||
197 | case PAUSE_RX|PAUSE_TX: | |
198 | fc = "RX/TX"; | |
199 | break; | |
200 | ||
201 | default: | |
202 | fc = "no"; | |
203 | break; | |
204 | } | |
205 | ||
428ac43f | 206 | netdev_info(dev, "link up, %s, full-duplex, %s PAUSE\n", s, fc); |
be839e39 CL |
207 | } else { |
208 | netif_carrier_off(dev); | |
428ac43f | 209 | netdev_info(dev, "link down\n"); |
be839e39 CL |
210 | } |
211 | } | |
212 | ||
5ad24def HS |
213 | /* |
214 | * THe port module type has changed on the indicated "port" (Virtual | |
215 | * Interface). | |
216 | */ | |
217 | void t4vf_os_portmod_changed(struct adapter *adapter, int pidx) | |
218 | { | |
219 | static const char * const mod_str[] = { | |
220 | NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM" | |
221 | }; | |
222 | const struct net_device *dev = adapter->port[pidx]; | |
223 | const struct port_info *pi = netdev_priv(dev); | |
224 | ||
225 | if (pi->mod_type == FW_PORT_MOD_TYPE_NONE) | |
226 | dev_info(adapter->pdev_dev, "%s: port module unplugged\n", | |
227 | dev->name); | |
228 | else if (pi->mod_type < ARRAY_SIZE(mod_str)) | |
229 | dev_info(adapter->pdev_dev, "%s: %s port module inserted\n", | |
230 | dev->name, mod_str[pi->mod_type]); | |
231 | else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED) | |
232 | dev_info(adapter->pdev_dev, "%s: unsupported optical port " | |
233 | "module inserted\n", dev->name); | |
234 | else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN) | |
235 | dev_info(adapter->pdev_dev, "%s: unknown port module inserted," | |
236 | "forcing TWINAX\n", dev->name); | |
237 | else if (pi->mod_type == FW_PORT_MOD_TYPE_ERROR) | |
238 | dev_info(adapter->pdev_dev, "%s: transceiver module error\n", | |
239 | dev->name); | |
240 | else | |
241 | dev_info(adapter->pdev_dev, "%s: unknown module type %d " | |
242 | "inserted\n", dev->name, pi->mod_type); | |
243 | } | |
244 | ||
be839e39 CL |
245 | /* |
246 | * Net device operations. | |
247 | * ====================== | |
248 | */ | |
249 | ||
be839e39 | 250 | |
87737663 | 251 | |
be839e39 CL |
252 | |
253 | /* | |
254 | * Perform the MAC and PHY actions needed to enable a "port" (Virtual | |
255 | * Interface). | |
256 | */ | |
257 | static int link_start(struct net_device *dev) | |
258 | { | |
259 | int ret; | |
260 | struct port_info *pi = netdev_priv(dev); | |
261 | ||
262 | /* | |
263 | * We do not set address filters and promiscuity here, the stack does | |
87737663 | 264 | * that step explicitly. Enable vlan accel. |
be839e39 | 265 | */ |
87737663 | 266 | ret = t4vf_set_rxmode(pi->adapter, pi->viid, dev->mtu, -1, -1, -1, 1, |
be839e39 CL |
267 | true); |
268 | if (ret == 0) { | |
269 | ret = t4vf_change_mac(pi->adapter, pi->viid, | |
270 | pi->xact_addr_filt, dev->dev_addr, true); | |
271 | if (ret >= 0) { | |
272 | pi->xact_addr_filt = ret; | |
273 | ret = 0; | |
274 | } | |
275 | } | |
276 | ||
277 | /* | |
278 | * We don't need to actually "start the link" itself since the | |
279 | * firmware will do that for us when the first Virtual Interface | |
280 | * is enabled on a port. | |
281 | */ | |
282 | if (ret == 0) | |
283 | ret = t4vf_enable_vi(pi->adapter, pi->viid, true, true); | |
284 | return ret; | |
285 | } | |
286 | ||
287 | /* | |
288 | * Name the MSI-X interrupts. | |
289 | */ | |
290 | static void name_msix_vecs(struct adapter *adapter) | |
291 | { | |
292 | int namelen = sizeof(adapter->msix_info[0].desc) - 1; | |
293 | int pidx; | |
294 | ||
295 | /* | |
296 | * Firmware events. | |
297 | */ | |
298 | snprintf(adapter->msix_info[MSIX_FW].desc, namelen, | |
299 | "%s-FWeventq", adapter->name); | |
300 | adapter->msix_info[MSIX_FW].desc[namelen] = 0; | |
301 | ||
302 | /* | |
303 | * Ethernet queues. | |
304 | */ | |
305 | for_each_port(adapter, pidx) { | |
306 | struct net_device *dev = adapter->port[pidx]; | |
307 | const struct port_info *pi = netdev_priv(dev); | |
308 | int qs, msi; | |
309 | ||
caedda35 | 310 | for (qs = 0, msi = MSIX_IQFLINT; qs < pi->nqsets; qs++, msi++) { |
be839e39 CL |
311 | snprintf(adapter->msix_info[msi].desc, namelen, |
312 | "%s-%d", dev->name, qs); | |
313 | adapter->msix_info[msi].desc[namelen] = 0; | |
314 | } | |
315 | } | |
316 | } | |
317 | ||
318 | /* | |
319 | * Request all of our MSI-X resources. | |
320 | */ | |
321 | static int request_msix_queue_irqs(struct adapter *adapter) | |
322 | { | |
323 | struct sge *s = &adapter->sge; | |
324 | int rxq, msi, err; | |
325 | ||
326 | /* | |
327 | * Firmware events. | |
328 | */ | |
329 | err = request_irq(adapter->msix_info[MSIX_FW].vec, t4vf_sge_intr_msix, | |
330 | 0, adapter->msix_info[MSIX_FW].desc, &s->fw_evtq); | |
331 | if (err) | |
332 | return err; | |
333 | ||
334 | /* | |
335 | * Ethernet queues. | |
336 | */ | |
caedda35 | 337 | msi = MSIX_IQFLINT; |
be839e39 CL |
338 | for_each_ethrxq(s, rxq) { |
339 | err = request_irq(adapter->msix_info[msi].vec, | |
340 | t4vf_sge_intr_msix, 0, | |
341 | adapter->msix_info[msi].desc, | |
342 | &s->ethrxq[rxq].rspq); | |
343 | if (err) | |
344 | goto err_free_irqs; | |
345 | msi++; | |
346 | } | |
347 | return 0; | |
348 | ||
349 | err_free_irqs: | |
350 | while (--rxq >= 0) | |
351 | free_irq(adapter->msix_info[--msi].vec, &s->ethrxq[rxq].rspq); | |
352 | free_irq(adapter->msix_info[MSIX_FW].vec, &s->fw_evtq); | |
353 | return err; | |
354 | } | |
355 | ||
356 | /* | |
357 | * Free our MSI-X resources. | |
358 | */ | |
359 | static void free_msix_queue_irqs(struct adapter *adapter) | |
360 | { | |
361 | struct sge *s = &adapter->sge; | |
362 | int rxq, msi; | |
363 | ||
364 | free_irq(adapter->msix_info[MSIX_FW].vec, &s->fw_evtq); | |
caedda35 | 365 | msi = MSIX_IQFLINT; |
be839e39 CL |
366 | for_each_ethrxq(s, rxq) |
367 | free_irq(adapter->msix_info[msi++].vec, | |
368 | &s->ethrxq[rxq].rspq); | |
369 | } | |
370 | ||
371 | /* | |
372 | * Turn on NAPI and start up interrupts on a response queue. | |
373 | */ | |
374 | static void qenable(struct sge_rspq *rspq) | |
375 | { | |
376 | napi_enable(&rspq->napi); | |
377 | ||
378 | /* | |
379 | * 0-increment the Going To Sleep register to start the timer and | |
380 | * enable interrupts. | |
381 | */ | |
382 | t4_write_reg(rspq->adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS, | |
383 | CIDXINC(0) | | |
384 | SEINTARM(rspq->intr_params) | | |
385 | INGRESSQID(rspq->cntxt_id)); | |
386 | } | |
387 | ||
388 | /* | |
389 | * Enable NAPI scheduling and interrupt generation for all Receive Queues. | |
390 | */ | |
391 | static void enable_rx(struct adapter *adapter) | |
392 | { | |
393 | int rxq; | |
394 | struct sge *s = &adapter->sge; | |
395 | ||
396 | for_each_ethrxq(s, rxq) | |
397 | qenable(&s->ethrxq[rxq].rspq); | |
398 | qenable(&s->fw_evtq); | |
399 | ||
400 | /* | |
401 | * The interrupt queue doesn't use NAPI so we do the 0-increment of | |
402 | * its Going To Sleep register here to get it started. | |
403 | */ | |
404 | if (adapter->flags & USING_MSI) | |
405 | t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS, | |
406 | CIDXINC(0) | | |
407 | SEINTARM(s->intrq.intr_params) | | |
408 | INGRESSQID(s->intrq.cntxt_id)); | |
409 | ||
410 | } | |
411 | ||
412 | /* | |
413 | * Wait until all NAPI handlers are descheduled. | |
414 | */ | |
415 | static void quiesce_rx(struct adapter *adapter) | |
416 | { | |
417 | struct sge *s = &adapter->sge; | |
418 | int rxq; | |
419 | ||
420 | for_each_ethrxq(s, rxq) | |
421 | napi_disable(&s->ethrxq[rxq].rspq.napi); | |
422 | napi_disable(&s->fw_evtq.napi); | |
423 | } | |
424 | ||
425 | /* | |
426 | * Response queue handler for the firmware event queue. | |
427 | */ | |
428 | static int fwevtq_handler(struct sge_rspq *rspq, const __be64 *rsp, | |
429 | const struct pkt_gl *gl) | |
430 | { | |
431 | /* | |
432 | * Extract response opcode and get pointer to CPL message body. | |
433 | */ | |
434 | struct adapter *adapter = rspq->adapter; | |
435 | u8 opcode = ((const struct rss_header *)rsp)->opcode; | |
436 | void *cpl = (void *)(rsp + 1); | |
437 | ||
438 | switch (opcode) { | |
439 | case CPL_FW6_MSG: { | |
440 | /* | |
441 | * We've received an asynchronous message from the firmware. | |
442 | */ | |
443 | const struct cpl_fw6_msg *fw_msg = cpl; | |
444 | if (fw_msg->type == FW6_TYPE_CMD_RPL) | |
445 | t4vf_handle_fw_rpl(adapter, fw_msg->data); | |
446 | break; | |
447 | } | |
448 | ||
94dace10 VP |
449 | case CPL_FW4_MSG: { |
450 | /* FW can send EGR_UPDATEs encapsulated in a CPL_FW4_MSG. | |
451 | */ | |
452 | const struct cpl_sge_egr_update *p = (void *)(rsp + 3); | |
453 | opcode = G_CPL_OPCODE(ntohl(p->opcode_qid)); | |
454 | if (opcode != CPL_SGE_EGR_UPDATE) { | |
455 | dev_err(adapter->pdev_dev, "unexpected FW4/CPL %#x on FW event queue\n" | |
456 | , opcode); | |
457 | break; | |
458 | } | |
459 | cpl = (void *)p; | |
460 | /*FALLTHROUGH*/ | |
461 | } | |
462 | ||
be839e39 CL |
463 | case CPL_SGE_EGR_UPDATE: { |
464 | /* | |
7f9dd2fa CL |
465 | * We've received an Egress Queue Status Update message. We |
466 | * get these, if the SGE is configured to send these when the | |
467 | * firmware passes certain points in processing our TX | |
468 | * Ethernet Queue or if we make an explicit request for one. | |
469 | * We use these updates to determine when we may need to | |
470 | * restart a TX Ethernet Queue which was stopped for lack of | |
471 | * free TX Queue Descriptors ... | |
be839e39 | 472 | */ |
64699336 | 473 | const struct cpl_sge_egr_update *p = cpl; |
be839e39 CL |
474 | unsigned int qid = EGR_QID(be32_to_cpu(p->opcode_qid)); |
475 | struct sge *s = &adapter->sge; | |
476 | struct sge_txq *tq; | |
477 | struct sge_eth_txq *txq; | |
478 | unsigned int eq_idx; | |
be839e39 CL |
479 | |
480 | /* | |
481 | * Perform sanity checking on the Queue ID to make sure it | |
482 | * really refers to one of our TX Ethernet Egress Queues which | |
483 | * is active and matches the queue's ID. None of these error | |
484 | * conditions should ever happen so we may want to either make | |
485 | * them fatal and/or conditionalized under DEBUG. | |
486 | */ | |
487 | eq_idx = EQ_IDX(s, qid); | |
488 | if (unlikely(eq_idx >= MAX_EGRQ)) { | |
489 | dev_err(adapter->pdev_dev, | |
490 | "Egress Update QID %d out of range\n", qid); | |
491 | break; | |
492 | } | |
493 | tq = s->egr_map[eq_idx]; | |
494 | if (unlikely(tq == NULL)) { | |
495 | dev_err(adapter->pdev_dev, | |
496 | "Egress Update QID %d TXQ=NULL\n", qid); | |
497 | break; | |
498 | } | |
499 | txq = container_of(tq, struct sge_eth_txq, q); | |
500 | if (unlikely(tq->abs_id != qid)) { | |
501 | dev_err(adapter->pdev_dev, | |
502 | "Egress Update QID %d refers to TXQ %d\n", | |
503 | qid, tq->abs_id); | |
504 | break; | |
505 | } | |
506 | ||
be839e39 CL |
507 | /* |
508 | * Restart a stopped TX Queue which has less than half of its | |
509 | * TX ring in use ... | |
510 | */ | |
511 | txq->q.restarts++; | |
512 | netif_tx_wake_queue(txq->txq); | |
513 | break; | |
514 | } | |
515 | ||
516 | default: | |
517 | dev_err(adapter->pdev_dev, | |
518 | "unexpected CPL %#x on FW event queue\n", opcode); | |
519 | } | |
520 | ||
521 | return 0; | |
522 | } | |
523 | ||
524 | /* | |
525 | * Allocate SGE TX/RX response queues. Determine how many sets of SGE queues | |
526 | * to use and initializes them. We support multiple "Queue Sets" per port if | |
527 | * we have MSI-X, otherwise just one queue set per port. | |
528 | */ | |
529 | static int setup_sge_queues(struct adapter *adapter) | |
530 | { | |
531 | struct sge *s = &adapter->sge; | |
532 | int err, pidx, msix; | |
533 | ||
534 | /* | |
535 | * Clear "Queue Set" Free List Starving and TX Queue Mapping Error | |
536 | * state. | |
537 | */ | |
538 | bitmap_zero(s->starving_fl, MAX_EGRQ); | |
539 | ||
540 | /* | |
541 | * If we're using MSI interrupt mode we need to set up a "forwarded | |
542 | * interrupt" queue which we'll set up with our MSI vector. The rest | |
543 | * of the ingress queues will be set up to forward their interrupts to | |
544 | * this queue ... This must be first since t4vf_sge_alloc_rxq() uses | |
545 | * the intrq's queue ID as the interrupt forwarding queue for the | |
546 | * subsequent calls ... | |
547 | */ | |
548 | if (adapter->flags & USING_MSI) { | |
549 | err = t4vf_sge_alloc_rxq(adapter, &s->intrq, false, | |
550 | adapter->port[0], 0, NULL, NULL); | |
551 | if (err) | |
552 | goto err_free_queues; | |
553 | } | |
554 | ||
555 | /* | |
556 | * Allocate our ingress queue for asynchronous firmware messages. | |
557 | */ | |
558 | err = t4vf_sge_alloc_rxq(adapter, &s->fw_evtq, true, adapter->port[0], | |
559 | MSIX_FW, NULL, fwevtq_handler); | |
560 | if (err) | |
561 | goto err_free_queues; | |
562 | ||
563 | /* | |
564 | * Allocate each "port"'s initial Queue Sets. These can be changed | |
565 | * later on ... up to the point where any interface on the adapter is | |
566 | * brought up at which point lots of things get nailed down | |
567 | * permanently ... | |
568 | */ | |
caedda35 | 569 | msix = MSIX_IQFLINT; |
be839e39 CL |
570 | for_each_port(adapter, pidx) { |
571 | struct net_device *dev = adapter->port[pidx]; | |
572 | struct port_info *pi = netdev_priv(dev); | |
573 | struct sge_eth_rxq *rxq = &s->ethrxq[pi->first_qset]; | |
574 | struct sge_eth_txq *txq = &s->ethtxq[pi->first_qset]; | |
be839e39 CL |
575 | int qs; |
576 | ||
c8639a82 | 577 | for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) { |
be839e39 CL |
578 | err = t4vf_sge_alloc_rxq(adapter, &rxq->rspq, false, |
579 | dev, msix++, | |
580 | &rxq->fl, t4vf_ethrx_handler); | |
581 | if (err) | |
582 | goto err_free_queues; | |
583 | ||
584 | err = t4vf_sge_alloc_eth_txq(adapter, txq, dev, | |
585 | netdev_get_tx_queue(dev, qs), | |
586 | s->fw_evtq.cntxt_id); | |
587 | if (err) | |
588 | goto err_free_queues; | |
589 | ||
590 | rxq->rspq.idx = qs; | |
591 | memset(&rxq->stats, 0, sizeof(rxq->stats)); | |
592 | } | |
593 | } | |
594 | ||
595 | /* | |
596 | * Create the reverse mappings for the queues. | |
597 | */ | |
598 | s->egr_base = s->ethtxq[0].q.abs_id - s->ethtxq[0].q.cntxt_id; | |
599 | s->ingr_base = s->ethrxq[0].rspq.abs_id - s->ethrxq[0].rspq.cntxt_id; | |
600 | IQ_MAP(s, s->fw_evtq.abs_id) = &s->fw_evtq; | |
601 | for_each_port(adapter, pidx) { | |
602 | struct net_device *dev = adapter->port[pidx]; | |
603 | struct port_info *pi = netdev_priv(dev); | |
604 | struct sge_eth_rxq *rxq = &s->ethrxq[pi->first_qset]; | |
605 | struct sge_eth_txq *txq = &s->ethtxq[pi->first_qset]; | |
be839e39 CL |
606 | int qs; |
607 | ||
c8639a82 | 608 | for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) { |
be839e39 CL |
609 | IQ_MAP(s, rxq->rspq.abs_id) = &rxq->rspq; |
610 | EQ_MAP(s, txq->q.abs_id) = &txq->q; | |
611 | ||
612 | /* | |
613 | * The FW_IQ_CMD doesn't return the Absolute Queue IDs | |
614 | * for Free Lists but since all of the Egress Queues | |
615 | * (including Free Lists) have Relative Queue IDs | |
616 | * which are computed as Absolute - Base Queue ID, we | |
617 | * can synthesize the Absolute Queue IDs for the Free | |
618 | * Lists. This is useful for debugging purposes when | |
619 | * we want to dump Queue Contexts via the PF Driver. | |
620 | */ | |
621 | rxq->fl.abs_id = rxq->fl.cntxt_id + s->egr_base; | |
622 | EQ_MAP(s, rxq->fl.abs_id) = &rxq->fl; | |
623 | } | |
624 | } | |
625 | return 0; | |
626 | ||
627 | err_free_queues: | |
628 | t4vf_free_sge_resources(adapter); | |
629 | return err; | |
630 | } | |
631 | ||
632 | /* | |
633 | * Set up Receive Side Scaling (RSS) to distribute packets to multiple receive | |
634 | * queues. We configure the RSS CPU lookup table to distribute to the number | |
635 | * of HW receive queues, and the response queue lookup table to narrow that | |
636 | * down to the response queues actually configured for each "port" (Virtual | |
637 | * Interface). We always configure the RSS mapping for all ports since the | |
638 | * mapping table has plenty of entries. | |
639 | */ | |
640 | static int setup_rss(struct adapter *adapter) | |
641 | { | |
642 | int pidx; | |
643 | ||
644 | for_each_port(adapter, pidx) { | |
645 | struct port_info *pi = adap2pinfo(adapter, pidx); | |
646 | struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[pi->first_qset]; | |
647 | u16 rss[MAX_PORT_QSETS]; | |
648 | int qs, err; | |
649 | ||
650 | for (qs = 0; qs < pi->nqsets; qs++) | |
651 | rss[qs] = rxq[qs].rspq.abs_id; | |
652 | ||
653 | err = t4vf_config_rss_range(adapter, pi->viid, | |
654 | 0, pi->rss_size, rss, pi->nqsets); | |
655 | if (err) | |
656 | return err; | |
657 | ||
658 | /* | |
659 | * Perform Global RSS Mode-specific initialization. | |
660 | */ | |
661 | switch (adapter->params.rss.mode) { | |
662 | case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: | |
663 | /* | |
664 | * If Tunnel All Lookup isn't specified in the global | |
665 | * RSS Configuration, then we need to specify a | |
666 | * default Ingress Queue for any ingress packets which | |
667 | * aren't hashed. We'll use our first ingress queue | |
668 | * ... | |
669 | */ | |
670 | if (!adapter->params.rss.u.basicvirtual.tnlalllookup) { | |
671 | union rss_vi_config config; | |
672 | err = t4vf_read_rss_vi_config(adapter, | |
673 | pi->viid, | |
674 | &config); | |
675 | if (err) | |
676 | return err; | |
677 | config.basicvirtual.defaultq = | |
678 | rxq[0].rspq.abs_id; | |
679 | err = t4vf_write_rss_vi_config(adapter, | |
680 | pi->viid, | |
681 | &config); | |
682 | if (err) | |
683 | return err; | |
684 | } | |
685 | break; | |
686 | } | |
687 | } | |
688 | ||
689 | return 0; | |
690 | } | |
691 | ||
692 | /* | |
693 | * Bring the adapter up. Called whenever we go from no "ports" open to having | |
694 | * one open. This function performs the actions necessary to make an adapter | |
695 | * operational, such as completing the initialization of HW modules, and | |
696 | * enabling interrupts. Must be called with the rtnl lock held. (Note that | |
697 | * this is called "cxgb_up" in the PF Driver.) | |
698 | */ | |
699 | static int adapter_up(struct adapter *adapter) | |
700 | { | |
701 | int err; | |
702 | ||
703 | /* | |
704 | * If this is the first time we've been called, perform basic | |
705 | * adapter setup. Once we've done this, many of our adapter | |
706 | * parameters can no longer be changed ... | |
707 | */ | |
708 | if ((adapter->flags & FULL_INIT_DONE) == 0) { | |
709 | err = setup_sge_queues(adapter); | |
710 | if (err) | |
711 | return err; | |
712 | err = setup_rss(adapter); | |
713 | if (err) { | |
714 | t4vf_free_sge_resources(adapter); | |
715 | return err; | |
716 | } | |
717 | ||
718 | if (adapter->flags & USING_MSIX) | |
719 | name_msix_vecs(adapter); | |
720 | adapter->flags |= FULL_INIT_DONE; | |
721 | } | |
722 | ||
723 | /* | |
724 | * Acquire our interrupt resources. We only support MSI-X and MSI. | |
725 | */ | |
726 | BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0); | |
727 | if (adapter->flags & USING_MSIX) | |
728 | err = request_msix_queue_irqs(adapter); | |
729 | else | |
730 | err = request_irq(adapter->pdev->irq, | |
731 | t4vf_intr_handler(adapter), 0, | |
732 | adapter->name, adapter); | |
733 | if (err) { | |
734 | dev_err(adapter->pdev_dev, "request_irq failed, err %d\n", | |
735 | err); | |
736 | return err; | |
737 | } | |
738 | ||
739 | /* | |
740 | * Enable NAPI ingress processing and return success. | |
741 | */ | |
742 | enable_rx(adapter); | |
743 | t4vf_sge_start(adapter); | |
744 | return 0; | |
745 | } | |
746 | ||
747 | /* | |
748 | * Bring the adapter down. Called whenever the last "port" (Virtual | |
749 | * Interface) closed. (Note that this routine is called "cxgb_down" in the PF | |
750 | * Driver.) | |
751 | */ | |
752 | static void adapter_down(struct adapter *adapter) | |
753 | { | |
754 | /* | |
755 | * Free interrupt resources. | |
756 | */ | |
757 | if (adapter->flags & USING_MSIX) | |
758 | free_msix_queue_irqs(adapter); | |
759 | else | |
760 | free_irq(adapter->pdev->irq, adapter); | |
761 | ||
762 | /* | |
763 | * Wait for NAPI handlers to finish. | |
764 | */ | |
765 | quiesce_rx(adapter); | |
766 | } | |
767 | ||
768 | /* | |
769 | * Start up a net device. | |
770 | */ | |
771 | static int cxgb4vf_open(struct net_device *dev) | |
772 | { | |
773 | int err; | |
774 | struct port_info *pi = netdev_priv(dev); | |
775 | struct adapter *adapter = pi->adapter; | |
776 | ||
777 | /* | |
778 | * If this is the first interface that we're opening on the "adapter", | |
779 | * bring the "adapter" up now. | |
780 | */ | |
781 | if (adapter->open_device_map == 0) { | |
782 | err = adapter_up(adapter); | |
783 | if (err) | |
784 | return err; | |
785 | } | |
786 | ||
787 | /* | |
788 | * Note that this interface is up and start everything up ... | |
789 | */ | |
003ab674 BH |
790 | netif_set_real_num_tx_queues(dev, pi->nqsets); |
791 | err = netif_set_real_num_rx_queues(dev, pi->nqsets); | |
792 | if (err) | |
343a8d13 | 793 | goto err_unwind; |
e7a3795f CL |
794 | err = link_start(dev); |
795 | if (err) | |
343a8d13 CL |
796 | goto err_unwind; |
797 | ||
be839e39 | 798 | netif_tx_start_all_queues(dev); |
343a8d13 | 799 | set_bit(pi->port_id, &adapter->open_device_map); |
be839e39 | 800 | return 0; |
343a8d13 CL |
801 | |
802 | err_unwind: | |
803 | if (adapter->open_device_map == 0) | |
804 | adapter_down(adapter); | |
805 | return err; | |
be839e39 CL |
806 | } |
807 | ||
808 | /* | |
809 | * Shut down a net device. This routine is called "cxgb_close" in the PF | |
810 | * Driver ... | |
811 | */ | |
812 | static int cxgb4vf_stop(struct net_device *dev) | |
813 | { | |
be839e39 CL |
814 | struct port_info *pi = netdev_priv(dev); |
815 | struct adapter *adapter = pi->adapter; | |
816 | ||
817 | netif_tx_stop_all_queues(dev); | |
818 | netif_carrier_off(dev); | |
343a8d13 | 819 | t4vf_enable_vi(adapter, pi->viid, false, false); |
be839e39 CL |
820 | pi->link_cfg.link_ok = 0; |
821 | ||
822 | clear_bit(pi->port_id, &adapter->open_device_map); | |
823 | if (adapter->open_device_map == 0) | |
824 | adapter_down(adapter); | |
825 | return 0; | |
826 | } | |
827 | ||
828 | /* | |
829 | * Translate our basic statistics into the standard "ifconfig" statistics. | |
830 | */ | |
831 | static struct net_device_stats *cxgb4vf_get_stats(struct net_device *dev) | |
832 | { | |
833 | struct t4vf_port_stats stats; | |
834 | struct port_info *pi = netdev2pinfo(dev); | |
835 | struct adapter *adapter = pi->adapter; | |
836 | struct net_device_stats *ns = &dev->stats; | |
837 | int err; | |
838 | ||
839 | spin_lock(&adapter->stats_lock); | |
840 | err = t4vf_get_port_stats(adapter, pi->pidx, &stats); | |
841 | spin_unlock(&adapter->stats_lock); | |
842 | ||
843 | memset(ns, 0, sizeof(*ns)); | |
844 | if (err) | |
845 | return ns; | |
846 | ||
847 | ns->tx_bytes = (stats.tx_bcast_bytes + stats.tx_mcast_bytes + | |
848 | stats.tx_ucast_bytes + stats.tx_offload_bytes); | |
849 | ns->tx_packets = (stats.tx_bcast_frames + stats.tx_mcast_frames + | |
850 | stats.tx_ucast_frames + stats.tx_offload_frames); | |
851 | ns->rx_bytes = (stats.rx_bcast_bytes + stats.rx_mcast_bytes + | |
852 | stats.rx_ucast_bytes); | |
853 | ns->rx_packets = (stats.rx_bcast_frames + stats.rx_mcast_frames + | |
854 | stats.rx_ucast_frames); | |
855 | ns->multicast = stats.rx_mcast_frames; | |
856 | ns->tx_errors = stats.tx_drop_frames; | |
857 | ns->rx_errors = stats.rx_err_frames; | |
858 | ||
859 | return ns; | |
860 | } | |
861 | ||
862 | /* | |
42eb59d3 CL |
863 | * Collect up to maxaddrs worth of a netdevice's unicast addresses, starting |
864 | * at a specified offset within the list, into an array of addrss pointers and | |
865 | * return the number collected. | |
be839e39 | 866 | */ |
42eb59d3 CL |
867 | static inline unsigned int collect_netdev_uc_list_addrs(const struct net_device *dev, |
868 | const u8 **addr, | |
869 | unsigned int offset, | |
870 | unsigned int maxaddrs) | |
be839e39 | 871 | { |
42eb59d3 | 872 | unsigned int index = 0; |
be839e39 CL |
873 | unsigned int naddr = 0; |
874 | const struct netdev_hw_addr *ha; | |
875 | ||
42eb59d3 CL |
876 | for_each_dev_addr(dev, ha) |
877 | if (index++ >= offset) { | |
878 | addr[naddr++] = ha->addr; | |
879 | if (naddr >= maxaddrs) | |
880 | break; | |
881 | } | |
be839e39 CL |
882 | return naddr; |
883 | } | |
884 | ||
885 | /* | |
42eb59d3 CL |
886 | * Collect up to maxaddrs worth of a netdevice's multicast addresses, starting |
887 | * at a specified offset within the list, into an array of addrss pointers and | |
888 | * return the number collected. | |
be839e39 | 889 | */ |
42eb59d3 CL |
890 | static inline unsigned int collect_netdev_mc_list_addrs(const struct net_device *dev, |
891 | const u8 **addr, | |
892 | unsigned int offset, | |
893 | unsigned int maxaddrs) | |
be839e39 | 894 | { |
42eb59d3 | 895 | unsigned int index = 0; |
be839e39 CL |
896 | unsigned int naddr = 0; |
897 | const struct netdev_hw_addr *ha; | |
898 | ||
42eb59d3 CL |
899 | netdev_for_each_mc_addr(ha, dev) |
900 | if (index++ >= offset) { | |
901 | addr[naddr++] = ha->addr; | |
902 | if (naddr >= maxaddrs) | |
903 | break; | |
904 | } | |
be839e39 CL |
905 | return naddr; |
906 | } | |
907 | ||
908 | /* | |
909 | * Configure the exact and hash address filters to handle a port's multicast | |
910 | * and secondary unicast MAC addresses. | |
911 | */ | |
912 | static int set_addr_filters(const struct net_device *dev, bool sleep) | |
913 | { | |
914 | u64 mhash = 0; | |
915 | u64 uhash = 0; | |
916 | bool free = true; | |
42eb59d3 | 917 | unsigned int offset, naddr; |
be839e39 | 918 | const u8 *addr[7]; |
42eb59d3 | 919 | int ret; |
be839e39 CL |
920 | const struct port_info *pi = netdev_priv(dev); |
921 | ||
922 | /* first do the secondary unicast addresses */ | |
42eb59d3 CL |
923 | for (offset = 0; ; offset += naddr) { |
924 | naddr = collect_netdev_uc_list_addrs(dev, addr, offset, | |
925 | ARRAY_SIZE(addr)); | |
926 | if (naddr == 0) | |
927 | break; | |
928 | ||
be839e39 | 929 | ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free, |
42eb59d3 | 930 | naddr, addr, NULL, &uhash, sleep); |
be839e39 CL |
931 | if (ret < 0) |
932 | return ret; | |
933 | ||
934 | free = false; | |
935 | } | |
936 | ||
937 | /* next set up the multicast addresses */ | |
42eb59d3 CL |
938 | for (offset = 0; ; offset += naddr) { |
939 | naddr = collect_netdev_mc_list_addrs(dev, addr, offset, | |
940 | ARRAY_SIZE(addr)); | |
941 | if (naddr == 0) | |
942 | break; | |
943 | ||
be839e39 | 944 | ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free, |
42eb59d3 | 945 | naddr, addr, NULL, &mhash, sleep); |
be839e39 CL |
946 | if (ret < 0) |
947 | return ret; | |
42eb59d3 | 948 | free = false; |
be839e39 CL |
949 | } |
950 | ||
951 | return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0, | |
952 | uhash | mhash, sleep); | |
953 | } | |
954 | ||
955 | /* | |
956 | * Set RX properties of a port, such as promiscruity, address filters, and MTU. | |
957 | * If @mtu is -1 it is left unchanged. | |
958 | */ | |
959 | static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok) | |
960 | { | |
961 | int ret; | |
962 | struct port_info *pi = netdev_priv(dev); | |
963 | ||
964 | ret = set_addr_filters(dev, sleep_ok); | |
965 | if (ret == 0) | |
966 | ret = t4vf_set_rxmode(pi->adapter, pi->viid, -1, | |
967 | (dev->flags & IFF_PROMISC) != 0, | |
968 | (dev->flags & IFF_ALLMULTI) != 0, | |
969 | 1, -1, sleep_ok); | |
970 | return ret; | |
971 | } | |
972 | ||
973 | /* | |
974 | * Set the current receive modes on the device. | |
975 | */ | |
976 | static void cxgb4vf_set_rxmode(struct net_device *dev) | |
977 | { | |
978 | /* unfortunately we can't return errors to the stack */ | |
979 | set_rxmode(dev, -1, false); | |
980 | } | |
981 | ||
982 | /* | |
983 | * Find the entry in the interrupt holdoff timer value array which comes | |
984 | * closest to the specified interrupt holdoff value. | |
985 | */ | |
986 | static int closest_timer(const struct sge *s, int us) | |
987 | { | |
988 | int i, timer_idx = 0, min_delta = INT_MAX; | |
989 | ||
990 | for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) { | |
991 | int delta = us - s->timer_val[i]; | |
992 | if (delta < 0) | |
993 | delta = -delta; | |
994 | if (delta < min_delta) { | |
995 | min_delta = delta; | |
996 | timer_idx = i; | |
997 | } | |
998 | } | |
999 | return timer_idx; | |
1000 | } | |
1001 | ||
1002 | static int closest_thres(const struct sge *s, int thres) | |
1003 | { | |
1004 | int i, delta, pktcnt_idx = 0, min_delta = INT_MAX; | |
1005 | ||
1006 | for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) { | |
1007 | delta = thres - s->counter_val[i]; | |
1008 | if (delta < 0) | |
1009 | delta = -delta; | |
1010 | if (delta < min_delta) { | |
1011 | min_delta = delta; | |
1012 | pktcnt_idx = i; | |
1013 | } | |
1014 | } | |
1015 | return pktcnt_idx; | |
1016 | } | |
1017 | ||
1018 | /* | |
1019 | * Return a queue's interrupt hold-off time in us. 0 means no timer. | |
1020 | */ | |
1021 | static unsigned int qtimer_val(const struct adapter *adapter, | |
1022 | const struct sge_rspq *rspq) | |
1023 | { | |
1024 | unsigned int timer_idx = QINTR_TIMER_IDX_GET(rspq->intr_params); | |
1025 | ||
1026 | return timer_idx < SGE_NTIMERS | |
1027 | ? adapter->sge.timer_val[timer_idx] | |
1028 | : 0; | |
1029 | } | |
1030 | ||
1031 | /** | |
1032 | * set_rxq_intr_params - set a queue's interrupt holdoff parameters | |
1033 | * @adapter: the adapter | |
1034 | * @rspq: the RX response queue | |
1035 | * @us: the hold-off time in us, or 0 to disable timer | |
1036 | * @cnt: the hold-off packet count, or 0 to disable counter | |
1037 | * | |
1038 | * Sets an RX response queue's interrupt hold-off time and packet count. | |
1039 | * At least one of the two needs to be enabled for the queue to generate | |
1040 | * interrupts. | |
1041 | */ | |
1042 | static int set_rxq_intr_params(struct adapter *adapter, struct sge_rspq *rspq, | |
1043 | unsigned int us, unsigned int cnt) | |
1044 | { | |
1045 | unsigned int timer_idx; | |
1046 | ||
1047 | /* | |
1048 | * If both the interrupt holdoff timer and count are specified as | |
1049 | * zero, default to a holdoff count of 1 ... | |
1050 | */ | |
1051 | if ((us | cnt) == 0) | |
1052 | cnt = 1; | |
1053 | ||
1054 | /* | |
1055 | * If an interrupt holdoff count has been specified, then find the | |
1056 | * closest configured holdoff count and use that. If the response | |
1057 | * queue has already been created, then update its queue context | |
1058 | * parameters ... | |
1059 | */ | |
1060 | if (cnt) { | |
1061 | int err; | |
1062 | u32 v, pktcnt_idx; | |
1063 | ||
1064 | pktcnt_idx = closest_thres(&adapter->sge, cnt); | |
1065 | if (rspq->desc && rspq->pktcnt_idx != pktcnt_idx) { | |
5167865a HS |
1066 | v = FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) | |
1067 | FW_PARAMS_PARAM_X_V( | |
be839e39 | 1068 | FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) | |
5167865a | 1069 | FW_PARAMS_PARAM_YZ_V(rspq->cntxt_id); |
be839e39 CL |
1070 | err = t4vf_set_params(adapter, 1, &v, &pktcnt_idx); |
1071 | if (err) | |
1072 | return err; | |
1073 | } | |
1074 | rspq->pktcnt_idx = pktcnt_idx; | |
1075 | } | |
1076 | ||
1077 | /* | |
1078 | * Compute the closest holdoff timer index from the supplied holdoff | |
1079 | * timer value. | |
1080 | */ | |
1081 | timer_idx = (us == 0 | |
1082 | ? SGE_TIMER_RSTRT_CNTR | |
1083 | : closest_timer(&adapter->sge, us)); | |
1084 | ||
1085 | /* | |
1086 | * Update the response queue's interrupt coalescing parameters and | |
1087 | * return success. | |
1088 | */ | |
1089 | rspq->intr_params = (QINTR_TIMER_IDX(timer_idx) | | |
1090 | (cnt > 0 ? QINTR_CNT_EN : 0)); | |
1091 | return 0; | |
1092 | } | |
1093 | ||
1094 | /* | |
1095 | * Return a version number to identify the type of adapter. The scheme is: | |
1096 | * - bits 0..9: chip version | |
1097 | * - bits 10..15: chip revision | |
1098 | */ | |
1099 | static inline unsigned int mk_adap_vers(const struct adapter *adapter) | |
1100 | { | |
1101 | /* | |
1102 | * Chip version 4, revision 0x3f (cxgb4vf). | |
1103 | */ | |
70ee3666 | 1104 | return CHELSIO_CHIP_VERSION(adapter->params.chip) | (0x3f << 10); |
be839e39 CL |
1105 | } |
1106 | ||
1107 | /* | |
1108 | * Execute the specified ioctl command. | |
1109 | */ | |
1110 | static int cxgb4vf_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | |
1111 | { | |
1112 | int ret = 0; | |
1113 | ||
1114 | switch (cmd) { | |
1115 | /* | |
1116 | * The VF Driver doesn't have access to any of the other | |
1117 | * common Ethernet device ioctl()'s (like reading/writing | |
1118 | * PHY registers, etc. | |
1119 | */ | |
1120 | ||
1121 | default: | |
1122 | ret = -EOPNOTSUPP; | |
1123 | break; | |
1124 | } | |
1125 | return ret; | |
1126 | } | |
1127 | ||
1128 | /* | |
1129 | * Change the device's MTU. | |
1130 | */ | |
1131 | static int cxgb4vf_change_mtu(struct net_device *dev, int new_mtu) | |
1132 | { | |
1133 | int ret; | |
1134 | struct port_info *pi = netdev_priv(dev); | |
1135 | ||
1136 | /* accommodate SACK */ | |
1137 | if (new_mtu < 81) | |
1138 | return -EINVAL; | |
1139 | ||
1140 | ret = t4vf_set_rxmode(pi->adapter, pi->viid, new_mtu, | |
1141 | -1, -1, -1, -1, true); | |
1142 | if (!ret) | |
1143 | dev->mtu = new_mtu; | |
1144 | return ret; | |
1145 | } | |
1146 | ||
c8f44aff MM |
1147 | static netdev_features_t cxgb4vf_fix_features(struct net_device *dev, |
1148 | netdev_features_t features) | |
87737663 JP |
1149 | { |
1150 | /* | |
1151 | * Since there is no support for separate rx/tx vlan accel | |
1152 | * enable/disable make sure tx flag is always in same state as rx. | |
1153 | */ | |
f646968f PM |
1154 | if (features & NETIF_F_HW_VLAN_CTAG_RX) |
1155 | features |= NETIF_F_HW_VLAN_CTAG_TX; | |
87737663 | 1156 | else |
f646968f | 1157 | features &= ~NETIF_F_HW_VLAN_CTAG_TX; |
87737663 JP |
1158 | |
1159 | return features; | |
1160 | } | |
1161 | ||
c8f44aff MM |
1162 | static int cxgb4vf_set_features(struct net_device *dev, |
1163 | netdev_features_t features) | |
87737663 JP |
1164 | { |
1165 | struct port_info *pi = netdev_priv(dev); | |
c8f44aff | 1166 | netdev_features_t changed = dev->features ^ features; |
87737663 | 1167 | |
f646968f | 1168 | if (changed & NETIF_F_HW_VLAN_CTAG_RX) |
87737663 | 1169 | t4vf_set_rxmode(pi->adapter, pi->viid, -1, -1, -1, -1, |
f646968f | 1170 | features & NETIF_F_HW_VLAN_CTAG_TX, 0); |
87737663 JP |
1171 | |
1172 | return 0; | |
1173 | } | |
1174 | ||
be839e39 CL |
1175 | /* |
1176 | * Change the devices MAC address. | |
1177 | */ | |
1178 | static int cxgb4vf_set_mac_addr(struct net_device *dev, void *_addr) | |
1179 | { | |
1180 | int ret; | |
1181 | struct sockaddr *addr = _addr; | |
1182 | struct port_info *pi = netdev_priv(dev); | |
1183 | ||
1184 | if (!is_valid_ether_addr(addr->sa_data)) | |
504f9b5a | 1185 | return -EADDRNOTAVAIL; |
be839e39 CL |
1186 | |
1187 | ret = t4vf_change_mac(pi->adapter, pi->viid, pi->xact_addr_filt, | |
1188 | addr->sa_data, true); | |
1189 | if (ret < 0) | |
1190 | return ret; | |
1191 | ||
1192 | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | |
1193 | pi->xact_addr_filt = ret; | |
1194 | return 0; | |
1195 | } | |
1196 | ||
be839e39 CL |
1197 | #ifdef CONFIG_NET_POLL_CONTROLLER |
1198 | /* | |
1199 | * Poll all of our receive queues. This is called outside of normal interrupt | |
1200 | * context. | |
1201 | */ | |
1202 | static void cxgb4vf_poll_controller(struct net_device *dev) | |
1203 | { | |
1204 | struct port_info *pi = netdev_priv(dev); | |
1205 | struct adapter *adapter = pi->adapter; | |
1206 | ||
1207 | if (adapter->flags & USING_MSIX) { | |
1208 | struct sge_eth_rxq *rxq; | |
1209 | int nqsets; | |
1210 | ||
1211 | rxq = &adapter->sge.ethrxq[pi->first_qset]; | |
1212 | for (nqsets = pi->nqsets; nqsets; nqsets--) { | |
1213 | t4vf_sge_intr_msix(0, &rxq->rspq); | |
1214 | rxq++; | |
1215 | } | |
1216 | } else | |
1217 | t4vf_intr_handler(adapter)(0, adapter); | |
1218 | } | |
1219 | #endif | |
1220 | ||
1221 | /* | |
1222 | * Ethtool operations. | |
1223 | * =================== | |
1224 | * | |
1225 | * Note that we don't support any ethtool operations which change the physical | |
1226 | * state of the port to which we're linked. | |
1227 | */ | |
1228 | ||
5ad24def HS |
1229 | static unsigned int t4vf_from_fw_linkcaps(enum fw_port_type type, |
1230 | unsigned int caps) | |
be839e39 | 1231 | { |
5ad24def HS |
1232 | unsigned int v = 0; |
1233 | ||
1234 | if (type == FW_PORT_TYPE_BT_SGMII || type == FW_PORT_TYPE_BT_XFI || | |
1235 | type == FW_PORT_TYPE_BT_XAUI) { | |
1236 | v |= SUPPORTED_TP; | |
1237 | if (caps & FW_PORT_CAP_SPEED_100M) | |
1238 | v |= SUPPORTED_100baseT_Full; | |
1239 | if (caps & FW_PORT_CAP_SPEED_1G) | |
1240 | v |= SUPPORTED_1000baseT_Full; | |
1241 | if (caps & FW_PORT_CAP_SPEED_10G) | |
1242 | v |= SUPPORTED_10000baseT_Full; | |
1243 | } else if (type == FW_PORT_TYPE_KX4 || type == FW_PORT_TYPE_KX) { | |
1244 | v |= SUPPORTED_Backplane; | |
1245 | if (caps & FW_PORT_CAP_SPEED_1G) | |
1246 | v |= SUPPORTED_1000baseKX_Full; | |
1247 | if (caps & FW_PORT_CAP_SPEED_10G) | |
1248 | v |= SUPPORTED_10000baseKX4_Full; | |
1249 | } else if (type == FW_PORT_TYPE_KR) | |
1250 | v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full; | |
1251 | else if (type == FW_PORT_TYPE_BP_AP) | |
1252 | v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | | |
1253 | SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full; | |
1254 | else if (type == FW_PORT_TYPE_BP4_AP) | |
1255 | v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | | |
1256 | SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full | | |
1257 | SUPPORTED_10000baseKX4_Full; | |
1258 | else if (type == FW_PORT_TYPE_FIBER_XFI || | |
1259 | type == FW_PORT_TYPE_FIBER_XAUI || | |
1260 | type == FW_PORT_TYPE_SFP || | |
1261 | type == FW_PORT_TYPE_QSFP_10G || | |
1262 | type == FW_PORT_TYPE_QSA) { | |
1263 | v |= SUPPORTED_FIBRE; | |
1264 | if (caps & FW_PORT_CAP_SPEED_1G) | |
1265 | v |= SUPPORTED_1000baseT_Full; | |
1266 | if (caps & FW_PORT_CAP_SPEED_10G) | |
1267 | v |= SUPPORTED_10000baseT_Full; | |
1268 | } else if (type == FW_PORT_TYPE_BP40_BA || | |
1269 | type == FW_PORT_TYPE_QSFP) { | |
1270 | v |= SUPPORTED_40000baseSR4_Full; | |
1271 | v |= SUPPORTED_FIBRE; | |
1272 | } | |
1273 | ||
1274 | if (caps & FW_PORT_CAP_ANEG) | |
1275 | v |= SUPPORTED_Autoneg; | |
1276 | return v; | |
1277 | } | |
be839e39 | 1278 | |
5ad24def HS |
1279 | static int cxgb4vf_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
1280 | { | |
1281 | const struct port_info *p = netdev_priv(dev); | |
1282 | ||
1283 | if (p->port_type == FW_PORT_TYPE_BT_SGMII || | |
1284 | p->port_type == FW_PORT_TYPE_BT_XFI || | |
1285 | p->port_type == FW_PORT_TYPE_BT_XAUI) | |
1286 | cmd->port = PORT_TP; | |
1287 | else if (p->port_type == FW_PORT_TYPE_FIBER_XFI || | |
1288 | p->port_type == FW_PORT_TYPE_FIBER_XAUI) | |
1289 | cmd->port = PORT_FIBRE; | |
1290 | else if (p->port_type == FW_PORT_TYPE_SFP || | |
1291 | p->port_type == FW_PORT_TYPE_QSFP_10G || | |
1292 | p->port_type == FW_PORT_TYPE_QSA || | |
1293 | p->port_type == FW_PORT_TYPE_QSFP) { | |
1294 | if (p->mod_type == FW_PORT_MOD_TYPE_LR || | |
1295 | p->mod_type == FW_PORT_MOD_TYPE_SR || | |
1296 | p->mod_type == FW_PORT_MOD_TYPE_ER || | |
1297 | p->mod_type == FW_PORT_MOD_TYPE_LRM) | |
1298 | cmd->port = PORT_FIBRE; | |
1299 | else if (p->mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE || | |
1300 | p->mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE) | |
1301 | cmd->port = PORT_DA; | |
1302 | else | |
1303 | cmd->port = PORT_OTHER; | |
1304 | } else | |
1305 | cmd->port = PORT_OTHER; | |
1306 | ||
1307 | if (p->mdio_addr >= 0) { | |
1308 | cmd->phy_address = p->mdio_addr; | |
1309 | cmd->transceiver = XCVR_EXTERNAL; | |
1310 | cmd->mdio_support = p->port_type == FW_PORT_TYPE_BT_SGMII ? | |
1311 | MDIO_SUPPORTS_C22 : MDIO_SUPPORTS_C45; | |
1312 | } else { | |
1313 | cmd->phy_address = 0; /* not really, but no better option */ | |
1314 | cmd->transceiver = XCVR_INTERNAL; | |
1315 | cmd->mdio_support = 0; | |
1316 | } | |
1317 | ||
1318 | cmd->supported = t4vf_from_fw_linkcaps(p->port_type, | |
1319 | p->link_cfg.supported); | |
1320 | cmd->advertising = t4vf_from_fw_linkcaps(p->port_type, | |
1321 | p->link_cfg.advertising); | |
70739497 | 1322 | ethtool_cmd_speed_set(cmd, |
5ad24def | 1323 | netif_carrier_ok(dev) ? p->link_cfg.speed : 0); |
be839e39 | 1324 | cmd->duplex = DUPLEX_FULL; |
5ad24def | 1325 | cmd->autoneg = p->link_cfg.autoneg; |
be839e39 CL |
1326 | cmd->maxtxpkt = 0; |
1327 | cmd->maxrxpkt = 0; | |
1328 | return 0; | |
1329 | } | |
1330 | ||
1331 | /* | |
1332 | * Return our driver information. | |
1333 | */ | |
1334 | static void cxgb4vf_get_drvinfo(struct net_device *dev, | |
1335 | struct ethtool_drvinfo *drvinfo) | |
1336 | { | |
1337 | struct adapter *adapter = netdev2adap(dev); | |
1338 | ||
23020ab3 RJ |
1339 | strlcpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver)); |
1340 | strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version)); | |
1341 | strlcpy(drvinfo->bus_info, pci_name(to_pci_dev(dev->dev.parent)), | |
1342 | sizeof(drvinfo->bus_info)); | |
be839e39 CL |
1343 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), |
1344 | "%u.%u.%u.%u, TP %u.%u.%u.%u", | |
b2e1a3f0 HS |
1345 | FW_HDR_FW_VER_MAJOR_G(adapter->params.dev.fwrev), |
1346 | FW_HDR_FW_VER_MINOR_G(adapter->params.dev.fwrev), | |
1347 | FW_HDR_FW_VER_MICRO_G(adapter->params.dev.fwrev), | |
1348 | FW_HDR_FW_VER_BUILD_G(adapter->params.dev.fwrev), | |
1349 | FW_HDR_FW_VER_MAJOR_G(adapter->params.dev.tprev), | |
1350 | FW_HDR_FW_VER_MINOR_G(adapter->params.dev.tprev), | |
1351 | FW_HDR_FW_VER_MICRO_G(adapter->params.dev.tprev), | |
1352 | FW_HDR_FW_VER_BUILD_G(adapter->params.dev.tprev)); | |
be839e39 CL |
1353 | } |
1354 | ||
1355 | /* | |
1356 | * Return current adapter message level. | |
1357 | */ | |
1358 | static u32 cxgb4vf_get_msglevel(struct net_device *dev) | |
1359 | { | |
1360 | return netdev2adap(dev)->msg_enable; | |
1361 | } | |
1362 | ||
1363 | /* | |
1364 | * Set current adapter message level. | |
1365 | */ | |
1366 | static void cxgb4vf_set_msglevel(struct net_device *dev, u32 msglevel) | |
1367 | { | |
1368 | netdev2adap(dev)->msg_enable = msglevel; | |
1369 | } | |
1370 | ||
1371 | /* | |
1372 | * Return the device's current Queue Set ring size parameters along with the | |
1373 | * allowed maximum values. Since ethtool doesn't understand the concept of | |
1374 | * multi-queue devices, we just return the current values associated with the | |
1375 | * first Queue Set. | |
1376 | */ | |
1377 | static void cxgb4vf_get_ringparam(struct net_device *dev, | |
1378 | struct ethtool_ringparam *rp) | |
1379 | { | |
1380 | const struct port_info *pi = netdev_priv(dev); | |
1381 | const struct sge *s = &pi->adapter->sge; | |
1382 | ||
1383 | rp->rx_max_pending = MAX_RX_BUFFERS; | |
1384 | rp->rx_mini_max_pending = MAX_RSPQ_ENTRIES; | |
1385 | rp->rx_jumbo_max_pending = 0; | |
1386 | rp->tx_max_pending = MAX_TXQ_ENTRIES; | |
1387 | ||
1388 | rp->rx_pending = s->ethrxq[pi->first_qset].fl.size - MIN_FL_RESID; | |
1389 | rp->rx_mini_pending = s->ethrxq[pi->first_qset].rspq.size; | |
1390 | rp->rx_jumbo_pending = 0; | |
1391 | rp->tx_pending = s->ethtxq[pi->first_qset].q.size; | |
1392 | } | |
1393 | ||
1394 | /* | |
1395 | * Set the Queue Set ring size parameters for the device. Again, since | |
1396 | * ethtool doesn't allow for the concept of multiple queues per device, we'll | |
1397 | * apply these new values across all of the Queue Sets associated with the | |
1398 | * device -- after vetting them of course! | |
1399 | */ | |
1400 | static int cxgb4vf_set_ringparam(struct net_device *dev, | |
1401 | struct ethtool_ringparam *rp) | |
1402 | { | |
1403 | const struct port_info *pi = netdev_priv(dev); | |
1404 | struct adapter *adapter = pi->adapter; | |
1405 | struct sge *s = &adapter->sge; | |
1406 | int qs; | |
1407 | ||
1408 | if (rp->rx_pending > MAX_RX_BUFFERS || | |
1409 | rp->rx_jumbo_pending || | |
1410 | rp->tx_pending > MAX_TXQ_ENTRIES || | |
1411 | rp->rx_mini_pending > MAX_RSPQ_ENTRIES || | |
1412 | rp->rx_mini_pending < MIN_RSPQ_ENTRIES || | |
1413 | rp->rx_pending < MIN_FL_ENTRIES || | |
1414 | rp->tx_pending < MIN_TXQ_ENTRIES) | |
1415 | return -EINVAL; | |
1416 | ||
1417 | if (adapter->flags & FULL_INIT_DONE) | |
1418 | return -EBUSY; | |
1419 | ||
1420 | for (qs = pi->first_qset; qs < pi->first_qset + pi->nqsets; qs++) { | |
1421 | s->ethrxq[qs].fl.size = rp->rx_pending + MIN_FL_RESID; | |
1422 | s->ethrxq[qs].rspq.size = rp->rx_mini_pending; | |
1423 | s->ethtxq[qs].q.size = rp->tx_pending; | |
1424 | } | |
1425 | return 0; | |
1426 | } | |
1427 | ||
1428 | /* | |
1429 | * Return the interrupt holdoff timer and count for the first Queue Set on the | |
1430 | * device. Our extension ioctl() (the cxgbtool interface) allows the | |
1431 | * interrupt holdoff timer to be read on all of the device's Queue Sets. | |
1432 | */ | |
1433 | static int cxgb4vf_get_coalesce(struct net_device *dev, | |
1434 | struct ethtool_coalesce *coalesce) | |
1435 | { | |
1436 | const struct port_info *pi = netdev_priv(dev); | |
1437 | const struct adapter *adapter = pi->adapter; | |
1438 | const struct sge_rspq *rspq = &adapter->sge.ethrxq[pi->first_qset].rspq; | |
1439 | ||
1440 | coalesce->rx_coalesce_usecs = qtimer_val(adapter, rspq); | |
1441 | coalesce->rx_max_coalesced_frames = | |
1442 | ((rspq->intr_params & QINTR_CNT_EN) | |
1443 | ? adapter->sge.counter_val[rspq->pktcnt_idx] | |
1444 | : 0); | |
1445 | return 0; | |
1446 | } | |
1447 | ||
1448 | /* | |
1449 | * Set the RX interrupt holdoff timer and count for the first Queue Set on the | |
1450 | * interface. Our extension ioctl() (the cxgbtool interface) allows us to set | |
1451 | * the interrupt holdoff timer on any of the device's Queue Sets. | |
1452 | */ | |
1453 | static int cxgb4vf_set_coalesce(struct net_device *dev, | |
1454 | struct ethtool_coalesce *coalesce) | |
1455 | { | |
1456 | const struct port_info *pi = netdev_priv(dev); | |
1457 | struct adapter *adapter = pi->adapter; | |
1458 | ||
1459 | return set_rxq_intr_params(adapter, | |
1460 | &adapter->sge.ethrxq[pi->first_qset].rspq, | |
1461 | coalesce->rx_coalesce_usecs, | |
1462 | coalesce->rx_max_coalesced_frames); | |
1463 | } | |
1464 | ||
1465 | /* | |
1466 | * Report current port link pause parameter settings. | |
1467 | */ | |
1468 | static void cxgb4vf_get_pauseparam(struct net_device *dev, | |
1469 | struct ethtool_pauseparam *pauseparam) | |
1470 | { | |
1471 | struct port_info *pi = netdev_priv(dev); | |
1472 | ||
1473 | pauseparam->autoneg = (pi->link_cfg.requested_fc & PAUSE_AUTONEG) != 0; | |
1474 | pauseparam->rx_pause = (pi->link_cfg.fc & PAUSE_RX) != 0; | |
1475 | pauseparam->tx_pause = (pi->link_cfg.fc & PAUSE_TX) != 0; | |
1476 | } | |
1477 | ||
be839e39 CL |
1478 | /* |
1479 | * Identify the port by blinking the port's LED. | |
1480 | */ | |
857a3d0f DM |
1481 | static int cxgb4vf_phys_id(struct net_device *dev, |
1482 | enum ethtool_phys_id_state state) | |
be839e39 | 1483 | { |
857a3d0f | 1484 | unsigned int val; |
be839e39 CL |
1485 | struct port_info *pi = netdev_priv(dev); |
1486 | ||
857a3d0f DM |
1487 | if (state == ETHTOOL_ID_ACTIVE) |
1488 | val = 0xffff; | |
1489 | else if (state == ETHTOOL_ID_INACTIVE) | |
1490 | val = 0; | |
1491 | else | |
1492 | return -EINVAL; | |
1493 | ||
1494 | return t4vf_identify_port(pi->adapter, pi->viid, val); | |
be839e39 CL |
1495 | } |
1496 | ||
1497 | /* | |
1498 | * Port stats maintained per queue of the port. | |
1499 | */ | |
1500 | struct queue_port_stats { | |
1501 | u64 tso; | |
1502 | u64 tx_csum; | |
1503 | u64 rx_csum; | |
1504 | u64 vlan_ex; | |
1505 | u64 vlan_ins; | |
f12fe353 CL |
1506 | u64 lro_pkts; |
1507 | u64 lro_merged; | |
be839e39 CL |
1508 | }; |
1509 | ||
1510 | /* | |
1511 | * Strings for the ETH_SS_STATS statistics set ("ethtool -S"). Note that | |
1512 | * these need to match the order of statistics returned by | |
1513 | * t4vf_get_port_stats(). | |
1514 | */ | |
1515 | static const char stats_strings[][ETH_GSTRING_LEN] = { | |
1516 | /* | |
1517 | * These must match the layout of the t4vf_port_stats structure. | |
1518 | */ | |
1519 | "TxBroadcastBytes ", | |
1520 | "TxBroadcastFrames ", | |
1521 | "TxMulticastBytes ", | |
1522 | "TxMulticastFrames ", | |
1523 | "TxUnicastBytes ", | |
1524 | "TxUnicastFrames ", | |
1525 | "TxDroppedFrames ", | |
1526 | "TxOffloadBytes ", | |
1527 | "TxOffloadFrames ", | |
1528 | "RxBroadcastBytes ", | |
1529 | "RxBroadcastFrames ", | |
1530 | "RxMulticastBytes ", | |
1531 | "RxMulticastFrames ", | |
1532 | "RxUnicastBytes ", | |
1533 | "RxUnicastFrames ", | |
1534 | "RxErrorFrames ", | |
1535 | ||
1536 | /* | |
1537 | * These are accumulated per-queue statistics and must match the | |
1538 | * order of the fields in the queue_port_stats structure. | |
1539 | */ | |
1540 | "TSO ", | |
1541 | "TxCsumOffload ", | |
1542 | "RxCsumGood ", | |
1543 | "VLANextractions ", | |
1544 | "VLANinsertions ", | |
f12fe353 CL |
1545 | "GROPackets ", |
1546 | "GROMerged ", | |
be839e39 CL |
1547 | }; |
1548 | ||
1549 | /* | |
1550 | * Return the number of statistics in the specified statistics set. | |
1551 | */ | |
1552 | static int cxgb4vf_get_sset_count(struct net_device *dev, int sset) | |
1553 | { | |
1554 | switch (sset) { | |
1555 | case ETH_SS_STATS: | |
1556 | return ARRAY_SIZE(stats_strings); | |
1557 | default: | |
1558 | return -EOPNOTSUPP; | |
1559 | } | |
1560 | /*NOTREACHED*/ | |
1561 | } | |
1562 | ||
1563 | /* | |
1564 | * Return the strings for the specified statistics set. | |
1565 | */ | |
1566 | static void cxgb4vf_get_strings(struct net_device *dev, | |
1567 | u32 sset, | |
1568 | u8 *data) | |
1569 | { | |
1570 | switch (sset) { | |
1571 | case ETH_SS_STATS: | |
1572 | memcpy(data, stats_strings, sizeof(stats_strings)); | |
1573 | break; | |
1574 | } | |
1575 | } | |
1576 | ||
1577 | /* | |
1578 | * Small utility routine to accumulate queue statistics across the queues of | |
1579 | * a "port". | |
1580 | */ | |
1581 | static void collect_sge_port_stats(const struct adapter *adapter, | |
1582 | const struct port_info *pi, | |
1583 | struct queue_port_stats *stats) | |
1584 | { | |
1585 | const struct sge_eth_txq *txq = &adapter->sge.ethtxq[pi->first_qset]; | |
1586 | const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[pi->first_qset]; | |
1587 | int qs; | |
1588 | ||
1589 | memset(stats, 0, sizeof(*stats)); | |
1590 | for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) { | |
1591 | stats->tso += txq->tso; | |
1592 | stats->tx_csum += txq->tx_cso; | |
1593 | stats->rx_csum += rxq->stats.rx_cso; | |
1594 | stats->vlan_ex += rxq->stats.vlan_ex; | |
1595 | stats->vlan_ins += txq->vlan_ins; | |
f12fe353 CL |
1596 | stats->lro_pkts += rxq->stats.lro_pkts; |
1597 | stats->lro_merged += rxq->stats.lro_merged; | |
be839e39 CL |
1598 | } |
1599 | } | |
1600 | ||
1601 | /* | |
1602 | * Return the ETH_SS_STATS statistics set. | |
1603 | */ | |
1604 | static void cxgb4vf_get_ethtool_stats(struct net_device *dev, | |
1605 | struct ethtool_stats *stats, | |
1606 | u64 *data) | |
1607 | { | |
1608 | struct port_info *pi = netdev2pinfo(dev); | |
1609 | struct adapter *adapter = pi->adapter; | |
1610 | int err = t4vf_get_port_stats(adapter, pi->pidx, | |
1611 | (struct t4vf_port_stats *)data); | |
1612 | if (err) | |
1613 | memset(data, 0, sizeof(struct t4vf_port_stats)); | |
1614 | ||
1615 | data += sizeof(struct t4vf_port_stats) / sizeof(u64); | |
1616 | collect_sge_port_stats(adapter, pi, (struct queue_port_stats *)data); | |
1617 | } | |
1618 | ||
1619 | /* | |
1620 | * Return the size of our register map. | |
1621 | */ | |
1622 | static int cxgb4vf_get_regs_len(struct net_device *dev) | |
1623 | { | |
1624 | return T4VF_REGMAP_SIZE; | |
1625 | } | |
1626 | ||
1627 | /* | |
1628 | * Dump a block of registers, start to end inclusive, into a buffer. | |
1629 | */ | |
1630 | static void reg_block_dump(struct adapter *adapter, void *regbuf, | |
1631 | unsigned int start, unsigned int end) | |
1632 | { | |
1633 | u32 *bp = regbuf + start - T4VF_REGMAP_START; | |
1634 | ||
1635 | for ( ; start <= end; start += sizeof(u32)) { | |
1636 | /* | |
1637 | * Avoid reading the Mailbox Control register since that | |
1638 | * can trigger a Mailbox Ownership Arbitration cycle and | |
1639 | * interfere with communication with the firmware. | |
1640 | */ | |
1641 | if (start == T4VF_CIM_BASE_ADDR + CIM_VF_EXT_MAILBOX_CTRL) | |
1642 | *bp++ = 0xffff; | |
1643 | else | |
1644 | *bp++ = t4_read_reg(adapter, start); | |
1645 | } | |
1646 | } | |
1647 | ||
1648 | /* | |
1649 | * Copy our entire register map into the provided buffer. | |
1650 | */ | |
1651 | static void cxgb4vf_get_regs(struct net_device *dev, | |
1652 | struct ethtool_regs *regs, | |
1653 | void *regbuf) | |
1654 | { | |
1655 | struct adapter *adapter = netdev2adap(dev); | |
1656 | ||
1657 | regs->version = mk_adap_vers(adapter); | |
1658 | ||
1659 | /* | |
1660 | * Fill in register buffer with our register map. | |
1661 | */ | |
1662 | memset(regbuf, 0, T4VF_REGMAP_SIZE); | |
1663 | ||
1664 | reg_block_dump(adapter, regbuf, | |
1665 | T4VF_SGE_BASE_ADDR + T4VF_MOD_MAP_SGE_FIRST, | |
1666 | T4VF_SGE_BASE_ADDR + T4VF_MOD_MAP_SGE_LAST); | |
1667 | reg_block_dump(adapter, regbuf, | |
1668 | T4VF_MPS_BASE_ADDR + T4VF_MOD_MAP_MPS_FIRST, | |
1669 | T4VF_MPS_BASE_ADDR + T4VF_MOD_MAP_MPS_LAST); | |
70ee3666 HS |
1670 | |
1671 | /* T5 adds new registers in the PL Register map. | |
1672 | */ | |
be839e39 CL |
1673 | reg_block_dump(adapter, regbuf, |
1674 | T4VF_PL_BASE_ADDR + T4VF_MOD_MAP_PL_FIRST, | |
70ee3666 HS |
1675 | T4VF_PL_BASE_ADDR + (is_t4(adapter->params.chip) |
1676 | ? A_PL_VF_WHOAMI : A_PL_VF_REVISION)); | |
be839e39 CL |
1677 | reg_block_dump(adapter, regbuf, |
1678 | T4VF_CIM_BASE_ADDR + T4VF_MOD_MAP_CIM_FIRST, | |
1679 | T4VF_CIM_BASE_ADDR + T4VF_MOD_MAP_CIM_LAST); | |
1680 | ||
1681 | reg_block_dump(adapter, regbuf, | |
1682 | T4VF_MBDATA_BASE_ADDR + T4VF_MBDATA_FIRST, | |
1683 | T4VF_MBDATA_BASE_ADDR + T4VF_MBDATA_LAST); | |
1684 | } | |
1685 | ||
1686 | /* | |
1687 | * Report current Wake On LAN settings. | |
1688 | */ | |
1689 | static void cxgb4vf_get_wol(struct net_device *dev, | |
1690 | struct ethtool_wolinfo *wol) | |
1691 | { | |
1692 | wol->supported = 0; | |
1693 | wol->wolopts = 0; | |
1694 | memset(&wol->sopass, 0, sizeof(wol->sopass)); | |
1695 | } | |
1696 | ||
410989f6 CL |
1697 | /* |
1698 | * TCP Segmentation Offload flags which we support. | |
1699 | */ | |
1700 | #define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN) | |
1701 | ||
9b07be4b | 1702 | static const struct ethtool_ops cxgb4vf_ethtool_ops = { |
be839e39 CL |
1703 | .get_settings = cxgb4vf_get_settings, |
1704 | .get_drvinfo = cxgb4vf_get_drvinfo, | |
1705 | .get_msglevel = cxgb4vf_get_msglevel, | |
1706 | .set_msglevel = cxgb4vf_set_msglevel, | |
1707 | .get_ringparam = cxgb4vf_get_ringparam, | |
1708 | .set_ringparam = cxgb4vf_set_ringparam, | |
1709 | .get_coalesce = cxgb4vf_get_coalesce, | |
1710 | .set_coalesce = cxgb4vf_set_coalesce, | |
1711 | .get_pauseparam = cxgb4vf_get_pauseparam, | |
be839e39 CL |
1712 | .get_link = ethtool_op_get_link, |
1713 | .get_strings = cxgb4vf_get_strings, | |
857a3d0f | 1714 | .set_phys_id = cxgb4vf_phys_id, |
be839e39 CL |
1715 | .get_sset_count = cxgb4vf_get_sset_count, |
1716 | .get_ethtool_stats = cxgb4vf_get_ethtool_stats, | |
1717 | .get_regs_len = cxgb4vf_get_regs_len, | |
1718 | .get_regs = cxgb4vf_get_regs, | |
1719 | .get_wol = cxgb4vf_get_wol, | |
be839e39 CL |
1720 | }; |
1721 | ||
1722 | /* | |
1723 | * /sys/kernel/debug/cxgb4vf support code and data. | |
1724 | * ================================================ | |
1725 | */ | |
1726 | ||
1727 | /* | |
1728 | * Show SGE Queue Set information. We display QPL Queues Sets per line. | |
1729 | */ | |
1730 | #define QPL 4 | |
1731 | ||
1732 | static int sge_qinfo_show(struct seq_file *seq, void *v) | |
1733 | { | |
1734 | struct adapter *adapter = seq->private; | |
1735 | int eth_entries = DIV_ROUND_UP(adapter->sge.ethqsets, QPL); | |
1736 | int qs, r = (uintptr_t)v - 1; | |
1737 | ||
1738 | if (r) | |
1739 | seq_putc(seq, '\n'); | |
1740 | ||
1741 | #define S3(fmt_spec, s, v) \ | |
1742 | do {\ | |
1743 | seq_printf(seq, "%-12s", s); \ | |
1744 | for (qs = 0; qs < n; ++qs) \ | |
1745 | seq_printf(seq, " %16" fmt_spec, v); \ | |
1746 | seq_putc(seq, '\n'); \ | |
1747 | } while (0) | |
1748 | #define S(s, v) S3("s", s, v) | |
1749 | #define T(s, v) S3("u", s, txq[qs].v) | |
1750 | #define R(s, v) S3("u", s, rxq[qs].v) | |
1751 | ||
1752 | if (r < eth_entries) { | |
1753 | const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[r * QPL]; | |
1754 | const struct sge_eth_txq *txq = &adapter->sge.ethtxq[r * QPL]; | |
1755 | int n = min(QPL, adapter->sge.ethqsets - QPL * r); | |
1756 | ||
1757 | S("QType:", "Ethernet"); | |
1758 | S("Interface:", | |
1759 | (rxq[qs].rspq.netdev | |
1760 | ? rxq[qs].rspq.netdev->name | |
1761 | : "N/A")); | |
1762 | S3("d", "Port:", | |
1763 | (rxq[qs].rspq.netdev | |
1764 | ? ((struct port_info *) | |
1765 | netdev_priv(rxq[qs].rspq.netdev))->port_id | |
1766 | : -1)); | |
1767 | T("TxQ ID:", q.abs_id); | |
1768 | T("TxQ size:", q.size); | |
1769 | T("TxQ inuse:", q.in_use); | |
1770 | T("TxQ PIdx:", q.pidx); | |
1771 | T("TxQ CIdx:", q.cidx); | |
1772 | R("RspQ ID:", rspq.abs_id); | |
1773 | R("RspQ size:", rspq.size); | |
1774 | R("RspQE size:", rspq.iqe_len); | |
1775 | S3("u", "Intr delay:", qtimer_val(adapter, &rxq[qs].rspq)); | |
1776 | S3("u", "Intr pktcnt:", | |
1777 | adapter->sge.counter_val[rxq[qs].rspq.pktcnt_idx]); | |
1778 | R("RspQ CIdx:", rspq.cidx); | |
1779 | R("RspQ Gen:", rspq.gen); | |
1780 | R("FL ID:", fl.abs_id); | |
1781 | R("FL size:", fl.size - MIN_FL_RESID); | |
1782 | R("FL avail:", fl.avail); | |
1783 | R("FL PIdx:", fl.pidx); | |
1784 | R("FL CIdx:", fl.cidx); | |
1785 | return 0; | |
1786 | } | |
1787 | ||
1788 | r -= eth_entries; | |
1789 | if (r == 0) { | |
1790 | const struct sge_rspq *evtq = &adapter->sge.fw_evtq; | |
1791 | ||
1792 | seq_printf(seq, "%-12s %16s\n", "QType:", "FW event queue"); | |
1793 | seq_printf(seq, "%-12s %16u\n", "RspQ ID:", evtq->abs_id); | |
1794 | seq_printf(seq, "%-12s %16u\n", "Intr delay:", | |
1795 | qtimer_val(adapter, evtq)); | |
1796 | seq_printf(seq, "%-12s %16u\n", "Intr pktcnt:", | |
1797 | adapter->sge.counter_val[evtq->pktcnt_idx]); | |
1798 | seq_printf(seq, "%-12s %16u\n", "RspQ Cidx:", evtq->cidx); | |
1799 | seq_printf(seq, "%-12s %16u\n", "RspQ Gen:", evtq->gen); | |
1800 | } else if (r == 1) { | |
1801 | const struct sge_rspq *intrq = &adapter->sge.intrq; | |
1802 | ||
1803 | seq_printf(seq, "%-12s %16s\n", "QType:", "Interrupt Queue"); | |
1804 | seq_printf(seq, "%-12s %16u\n", "RspQ ID:", intrq->abs_id); | |
1805 | seq_printf(seq, "%-12s %16u\n", "Intr delay:", | |
1806 | qtimer_val(adapter, intrq)); | |
1807 | seq_printf(seq, "%-12s %16u\n", "Intr pktcnt:", | |
1808 | adapter->sge.counter_val[intrq->pktcnt_idx]); | |
1809 | seq_printf(seq, "%-12s %16u\n", "RspQ Cidx:", intrq->cidx); | |
1810 | seq_printf(seq, "%-12s %16u\n", "RspQ Gen:", intrq->gen); | |
1811 | } | |
1812 | ||
1813 | #undef R | |
1814 | #undef T | |
1815 | #undef S | |
1816 | #undef S3 | |
1817 | ||
1818 | return 0; | |
1819 | } | |
1820 | ||
1821 | /* | |
1822 | * Return the number of "entries" in our "file". We group the multi-Queue | |
1823 | * sections with QPL Queue Sets per "entry". The sections of the output are: | |
1824 | * | |
1825 | * Ethernet RX/TX Queue Sets | |
1826 | * Firmware Event Queue | |
1827 | * Forwarded Interrupt Queue (if in MSI mode) | |
1828 | */ | |
1829 | static int sge_queue_entries(const struct adapter *adapter) | |
1830 | { | |
1831 | return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 + | |
1832 | ((adapter->flags & USING_MSI) != 0); | |
1833 | } | |
1834 | ||
1835 | static void *sge_queue_start(struct seq_file *seq, loff_t *pos) | |
1836 | { | |
1837 | int entries = sge_queue_entries(seq->private); | |
1838 | ||
1839 | return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; | |
1840 | } | |
1841 | ||
1842 | static void sge_queue_stop(struct seq_file *seq, void *v) | |
1843 | { | |
1844 | } | |
1845 | ||
1846 | static void *sge_queue_next(struct seq_file *seq, void *v, loff_t *pos) | |
1847 | { | |
1848 | int entries = sge_queue_entries(seq->private); | |
1849 | ||
1850 | ++*pos; | |
1851 | return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; | |
1852 | } | |
1853 | ||
1854 | static const struct seq_operations sge_qinfo_seq_ops = { | |
1855 | .start = sge_queue_start, | |
1856 | .next = sge_queue_next, | |
1857 | .stop = sge_queue_stop, | |
1858 | .show = sge_qinfo_show | |
1859 | }; | |
1860 | ||
1861 | static int sge_qinfo_open(struct inode *inode, struct file *file) | |
1862 | { | |
1863 | int res = seq_open(file, &sge_qinfo_seq_ops); | |
1864 | ||
1865 | if (!res) { | |
1866 | struct seq_file *seq = file->private_data; | |
1867 | seq->private = inode->i_private; | |
1868 | } | |
1869 | return res; | |
1870 | } | |
1871 | ||
1872 | static const struct file_operations sge_qinfo_debugfs_fops = { | |
1873 | .owner = THIS_MODULE, | |
1874 | .open = sge_qinfo_open, | |
1875 | .read = seq_read, | |
1876 | .llseek = seq_lseek, | |
1877 | .release = seq_release, | |
1878 | }; | |
1879 | ||
1880 | /* | |
1881 | * Show SGE Queue Set statistics. We display QPL Queues Sets per line. | |
1882 | */ | |
1883 | #define QPL 4 | |
1884 | ||
1885 | static int sge_qstats_show(struct seq_file *seq, void *v) | |
1886 | { | |
1887 | struct adapter *adapter = seq->private; | |
1888 | int eth_entries = DIV_ROUND_UP(adapter->sge.ethqsets, QPL); | |
1889 | int qs, r = (uintptr_t)v - 1; | |
1890 | ||
1891 | if (r) | |
1892 | seq_putc(seq, '\n'); | |
1893 | ||
1894 | #define S3(fmt, s, v) \ | |
1895 | do { \ | |
1896 | seq_printf(seq, "%-16s", s); \ | |
1897 | for (qs = 0; qs < n; ++qs) \ | |
1898 | seq_printf(seq, " %8" fmt, v); \ | |
1899 | seq_putc(seq, '\n'); \ | |
1900 | } while (0) | |
1901 | #define S(s, v) S3("s", s, v) | |
1902 | ||
1903 | #define T3(fmt, s, v) S3(fmt, s, txq[qs].v) | |
1904 | #define T(s, v) T3("lu", s, v) | |
1905 | ||
1906 | #define R3(fmt, s, v) S3(fmt, s, rxq[qs].v) | |
1907 | #define R(s, v) R3("lu", s, v) | |
1908 | ||
1909 | if (r < eth_entries) { | |
1910 | const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[r * QPL]; | |
1911 | const struct sge_eth_txq *txq = &adapter->sge.ethtxq[r * QPL]; | |
1912 | int n = min(QPL, adapter->sge.ethqsets - QPL * r); | |
1913 | ||
1914 | S("QType:", "Ethernet"); | |
1915 | S("Interface:", | |
1916 | (rxq[qs].rspq.netdev | |
1917 | ? rxq[qs].rspq.netdev->name | |
1918 | : "N/A")); | |
68dc9d36 | 1919 | R3("u", "RspQNullInts:", rspq.unhandled_irqs); |
be839e39 CL |
1920 | R("RxPackets:", stats.pkts); |
1921 | R("RxCSO:", stats.rx_cso); | |
1922 | R("VLANxtract:", stats.vlan_ex); | |
1923 | R("LROmerged:", stats.lro_merged); | |
1924 | R("LROpackets:", stats.lro_pkts); | |
1925 | R("RxDrops:", stats.rx_drops); | |
1926 | T("TSO:", tso); | |
1927 | T("TxCSO:", tx_cso); | |
1928 | T("VLANins:", vlan_ins); | |
1929 | T("TxQFull:", q.stops); | |
1930 | T("TxQRestarts:", q.restarts); | |
1931 | T("TxMapErr:", mapping_err); | |
1932 | R("FLAllocErr:", fl.alloc_failed); | |
1933 | R("FLLrgAlcErr:", fl.large_alloc_failed); | |
1934 | R("FLStarving:", fl.starving); | |
1935 | return 0; | |
1936 | } | |
1937 | ||
1938 | r -= eth_entries; | |
1939 | if (r == 0) { | |
1940 | const struct sge_rspq *evtq = &adapter->sge.fw_evtq; | |
1941 | ||
1942 | seq_printf(seq, "%-8s %16s\n", "QType:", "FW event queue"); | |
68dc9d36 CL |
1943 | seq_printf(seq, "%-16s %8u\n", "RspQNullInts:", |
1944 | evtq->unhandled_irqs); | |
be839e39 CL |
1945 | seq_printf(seq, "%-16s %8u\n", "RspQ CIdx:", evtq->cidx); |
1946 | seq_printf(seq, "%-16s %8u\n", "RspQ Gen:", evtq->gen); | |
1947 | } else if (r == 1) { | |
1948 | const struct sge_rspq *intrq = &adapter->sge.intrq; | |
1949 | ||
1950 | seq_printf(seq, "%-8s %16s\n", "QType:", "Interrupt Queue"); | |
68dc9d36 CL |
1951 | seq_printf(seq, "%-16s %8u\n", "RspQNullInts:", |
1952 | intrq->unhandled_irqs); | |
be839e39 CL |
1953 | seq_printf(seq, "%-16s %8u\n", "RspQ CIdx:", intrq->cidx); |
1954 | seq_printf(seq, "%-16s %8u\n", "RspQ Gen:", intrq->gen); | |
1955 | } | |
1956 | ||
1957 | #undef R | |
1958 | #undef T | |
1959 | #undef S | |
1960 | #undef R3 | |
1961 | #undef T3 | |
1962 | #undef S3 | |
1963 | ||
1964 | return 0; | |
1965 | } | |
1966 | ||
1967 | /* | |
1968 | * Return the number of "entries" in our "file". We group the multi-Queue | |
1969 | * sections with QPL Queue Sets per "entry". The sections of the output are: | |
1970 | * | |
1971 | * Ethernet RX/TX Queue Sets | |
1972 | * Firmware Event Queue | |
1973 | * Forwarded Interrupt Queue (if in MSI mode) | |
1974 | */ | |
1975 | static int sge_qstats_entries(const struct adapter *adapter) | |
1976 | { | |
1977 | return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 + | |
1978 | ((adapter->flags & USING_MSI) != 0); | |
1979 | } | |
1980 | ||
1981 | static void *sge_qstats_start(struct seq_file *seq, loff_t *pos) | |
1982 | { | |
1983 | int entries = sge_qstats_entries(seq->private); | |
1984 | ||
1985 | return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; | |
1986 | } | |
1987 | ||
1988 | static void sge_qstats_stop(struct seq_file *seq, void *v) | |
1989 | { | |
1990 | } | |
1991 | ||
1992 | static void *sge_qstats_next(struct seq_file *seq, void *v, loff_t *pos) | |
1993 | { | |
1994 | int entries = sge_qstats_entries(seq->private); | |
1995 | ||
1996 | (*pos)++; | |
1997 | return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; | |
1998 | } | |
1999 | ||
2000 | static const struct seq_operations sge_qstats_seq_ops = { | |
2001 | .start = sge_qstats_start, | |
2002 | .next = sge_qstats_next, | |
2003 | .stop = sge_qstats_stop, | |
2004 | .show = sge_qstats_show | |
2005 | }; | |
2006 | ||
2007 | static int sge_qstats_open(struct inode *inode, struct file *file) | |
2008 | { | |
2009 | int res = seq_open(file, &sge_qstats_seq_ops); | |
2010 | ||
2011 | if (res == 0) { | |
2012 | struct seq_file *seq = file->private_data; | |
2013 | seq->private = inode->i_private; | |
2014 | } | |
2015 | return res; | |
2016 | } | |
2017 | ||
2018 | static const struct file_operations sge_qstats_proc_fops = { | |
2019 | .owner = THIS_MODULE, | |
2020 | .open = sge_qstats_open, | |
2021 | .read = seq_read, | |
2022 | .llseek = seq_lseek, | |
2023 | .release = seq_release, | |
2024 | }; | |
2025 | ||
2026 | /* | |
2027 | * Show PCI-E SR-IOV Virtual Function Resource Limits. | |
2028 | */ | |
2029 | static int resources_show(struct seq_file *seq, void *v) | |
2030 | { | |
2031 | struct adapter *adapter = seq->private; | |
2032 | struct vf_resources *vfres = &adapter->params.vfres; | |
2033 | ||
2034 | #define S(desc, fmt, var) \ | |
2035 | seq_printf(seq, "%-60s " fmt "\n", \ | |
2036 | desc " (" #var "):", vfres->var) | |
2037 | ||
2038 | S("Virtual Interfaces", "%d", nvi); | |
2039 | S("Egress Queues", "%d", neq); | |
2040 | S("Ethernet Control", "%d", nethctrl); | |
2041 | S("Ingress Queues/w Free Lists/Interrupts", "%d", niqflint); | |
2042 | S("Ingress Queues", "%d", niq); | |
2043 | S("Traffic Class", "%d", tc); | |
2044 | S("Port Access Rights Mask", "%#x", pmask); | |
2045 | S("MAC Address Filters", "%d", nexactf); | |
2046 | S("Firmware Command Read Capabilities", "%#x", r_caps); | |
2047 | S("Firmware Command Write/Execute Capabilities", "%#x", wx_caps); | |
2048 | ||
2049 | #undef S | |
2050 | ||
2051 | return 0; | |
2052 | } | |
2053 | ||
2054 | static int resources_open(struct inode *inode, struct file *file) | |
2055 | { | |
2056 | return single_open(file, resources_show, inode->i_private); | |
2057 | } | |
2058 | ||
2059 | static const struct file_operations resources_proc_fops = { | |
2060 | .owner = THIS_MODULE, | |
2061 | .open = resources_open, | |
2062 | .read = seq_read, | |
2063 | .llseek = seq_lseek, | |
2064 | .release = single_release, | |
2065 | }; | |
2066 | ||
2067 | /* | |
2068 | * Show Virtual Interfaces. | |
2069 | */ | |
2070 | static int interfaces_show(struct seq_file *seq, void *v) | |
2071 | { | |
2072 | if (v == SEQ_START_TOKEN) { | |
2073 | seq_puts(seq, "Interface Port VIID\n"); | |
2074 | } else { | |
2075 | struct adapter *adapter = seq->private; | |
2076 | int pidx = (uintptr_t)v - 2; | |
2077 | struct net_device *dev = adapter->port[pidx]; | |
2078 | struct port_info *pi = netdev_priv(dev); | |
2079 | ||
2080 | seq_printf(seq, "%9s %4d %#5x\n", | |
2081 | dev->name, pi->port_id, pi->viid); | |
2082 | } | |
2083 | return 0; | |
2084 | } | |
2085 | ||
2086 | static inline void *interfaces_get_idx(struct adapter *adapter, loff_t pos) | |
2087 | { | |
2088 | return pos <= adapter->params.nports | |
2089 | ? (void *)(uintptr_t)(pos + 1) | |
2090 | : NULL; | |
2091 | } | |
2092 | ||
2093 | static void *interfaces_start(struct seq_file *seq, loff_t *pos) | |
2094 | { | |
2095 | return *pos | |
2096 | ? interfaces_get_idx(seq->private, *pos) | |
2097 | : SEQ_START_TOKEN; | |
2098 | } | |
2099 | ||
2100 | static void *interfaces_next(struct seq_file *seq, void *v, loff_t *pos) | |
2101 | { | |
2102 | (*pos)++; | |
2103 | return interfaces_get_idx(seq->private, *pos); | |
2104 | } | |
2105 | ||
2106 | static void interfaces_stop(struct seq_file *seq, void *v) | |
2107 | { | |
2108 | } | |
2109 | ||
2110 | static const struct seq_operations interfaces_seq_ops = { | |
2111 | .start = interfaces_start, | |
2112 | .next = interfaces_next, | |
2113 | .stop = interfaces_stop, | |
2114 | .show = interfaces_show | |
2115 | }; | |
2116 | ||
2117 | static int interfaces_open(struct inode *inode, struct file *file) | |
2118 | { | |
2119 | int res = seq_open(file, &interfaces_seq_ops); | |
2120 | ||
2121 | if (res == 0) { | |
2122 | struct seq_file *seq = file->private_data; | |
2123 | seq->private = inode->i_private; | |
2124 | } | |
2125 | return res; | |
2126 | } | |
2127 | ||
2128 | static const struct file_operations interfaces_proc_fops = { | |
2129 | .owner = THIS_MODULE, | |
2130 | .open = interfaces_open, | |
2131 | .read = seq_read, | |
2132 | .llseek = seq_lseek, | |
2133 | .release = seq_release, | |
2134 | }; | |
2135 | ||
2136 | /* | |
2137 | * /sys/kernel/debugfs/cxgb4vf/ files list. | |
2138 | */ | |
2139 | struct cxgb4vf_debugfs_entry { | |
2140 | const char *name; /* name of debugfs node */ | |
f4ae40a6 | 2141 | umode_t mode; /* file system mode */ |
be839e39 CL |
2142 | const struct file_operations *fops; |
2143 | }; | |
2144 | ||
2145 | static struct cxgb4vf_debugfs_entry debugfs_files[] = { | |
2146 | { "sge_qinfo", S_IRUGO, &sge_qinfo_debugfs_fops }, | |
2147 | { "sge_qstats", S_IRUGO, &sge_qstats_proc_fops }, | |
2148 | { "resources", S_IRUGO, &resources_proc_fops }, | |
2149 | { "interfaces", S_IRUGO, &interfaces_proc_fops }, | |
2150 | }; | |
2151 | ||
2152 | /* | |
2153 | * Module and device initialization and cleanup code. | |
2154 | * ================================================== | |
2155 | */ | |
2156 | ||
2157 | /* | |
2158 | * Set up out /sys/kernel/debug/cxgb4vf sub-nodes. We assume that the | |
2159 | * directory (debugfs_root) has already been set up. | |
2160 | */ | |
d289f864 | 2161 | static int setup_debugfs(struct adapter *adapter) |
be839e39 CL |
2162 | { |
2163 | int i; | |
2164 | ||
843635e0 | 2165 | BUG_ON(IS_ERR_OR_NULL(adapter->debugfs_root)); |
be839e39 CL |
2166 | |
2167 | /* | |
2168 | * Debugfs support is best effort. | |
2169 | */ | |
2170 | for (i = 0; i < ARRAY_SIZE(debugfs_files); i++) | |
2171 | (void)debugfs_create_file(debugfs_files[i].name, | |
2172 | debugfs_files[i].mode, | |
2173 | adapter->debugfs_root, | |
2174 | (void *)adapter, | |
2175 | debugfs_files[i].fops); | |
2176 | ||
2177 | return 0; | |
2178 | } | |
2179 | ||
2180 | /* | |
2181 | * Tear down the /sys/kernel/debug/cxgb4vf sub-nodes created above. We leave | |
2182 | * it to our caller to tear down the directory (debugfs_root). | |
2183 | */ | |
4204875d | 2184 | static void cleanup_debugfs(struct adapter *adapter) |
be839e39 | 2185 | { |
843635e0 | 2186 | BUG_ON(IS_ERR_OR_NULL(adapter->debugfs_root)); |
be839e39 CL |
2187 | |
2188 | /* | |
2189 | * Unlike our sister routine cleanup_proc(), we don't need to remove | |
2190 | * individual entries because a call will be made to | |
2191 | * debugfs_remove_recursive(). We just need to clean up any ancillary | |
2192 | * persistent state. | |
2193 | */ | |
2194 | /* nothing to do */ | |
2195 | } | |
2196 | ||
2197 | /* | |
2198 | * Perform early "adapter" initialization. This is where we discover what | |
2199 | * adapter parameters we're going to be using and initialize basic adapter | |
2200 | * hardware support. | |
2201 | */ | |
d289f864 | 2202 | static int adap_init0(struct adapter *adapter) |
be839e39 CL |
2203 | { |
2204 | struct vf_resources *vfres = &adapter->params.vfres; | |
2205 | struct sge_params *sge_params = &adapter->params.sge; | |
2206 | struct sge *s = &adapter->sge; | |
2207 | unsigned int ethqsets; | |
2208 | int err; | |
94dace10 | 2209 | u32 param, val = 0; |
be839e39 CL |
2210 | |
2211 | /* | |
2212 | * Wait for the device to become ready before proceeding ... | |
2213 | */ | |
2214 | err = t4vf_wait_dev_ready(adapter); | |
2215 | if (err) { | |
2216 | dev_err(adapter->pdev_dev, "device didn't become ready:" | |
2217 | " err=%d\n", err); | |
2218 | return err; | |
2219 | } | |
2220 | ||
e68e6133 CL |
2221 | /* |
2222 | * Some environments do not properly handle PCIE FLRs -- e.g. in Linux | |
2223 | * 2.6.31 and later we can't call pci_reset_function() in order to | |
2224 | * issue an FLR because of a self- deadlock on the device semaphore. | |
2225 | * Meanwhile, the OS infrastructure doesn't issue FLRs in all the | |
2226 | * cases where they're needed -- for instance, some versions of KVM | |
2227 | * fail to reset "Assigned Devices" when the VM reboots. Therefore we | |
2228 | * use the firmware based reset in order to reset any per function | |
2229 | * state. | |
2230 | */ | |
2231 | err = t4vf_fw_reset(adapter); | |
2232 | if (err < 0) { | |
2233 | dev_err(adapter->pdev_dev, "FW reset failed: err=%d\n", err); | |
2234 | return err; | |
2235 | } | |
2236 | ||
be839e39 CL |
2237 | /* |
2238 | * Grab basic operational parameters. These will predominantly have | |
2239 | * been set up by the Physical Function Driver or will be hard coded | |
2240 | * into the adapter. We just have to live with them ... Note that | |
2241 | * we _must_ get our VPD parameters before our SGE parameters because | |
2242 | * we need to know the adapter's core clock from the VPD in order to | |
2243 | * properly decode the SGE Timer Values. | |
2244 | */ | |
2245 | err = t4vf_get_dev_params(adapter); | |
2246 | if (err) { | |
2247 | dev_err(adapter->pdev_dev, "unable to retrieve adapter" | |
2248 | " device parameters: err=%d\n", err); | |
2249 | return err; | |
2250 | } | |
2251 | err = t4vf_get_vpd_params(adapter); | |
2252 | if (err) { | |
2253 | dev_err(adapter->pdev_dev, "unable to retrieve adapter" | |
2254 | " VPD parameters: err=%d\n", err); | |
2255 | return err; | |
2256 | } | |
2257 | err = t4vf_get_sge_params(adapter); | |
2258 | if (err) { | |
2259 | dev_err(adapter->pdev_dev, "unable to retrieve adapter" | |
2260 | " SGE parameters: err=%d\n", err); | |
2261 | return err; | |
2262 | } | |
2263 | err = t4vf_get_rss_glb_config(adapter); | |
2264 | if (err) { | |
2265 | dev_err(adapter->pdev_dev, "unable to retrieve adapter" | |
2266 | " RSS parameters: err=%d\n", err); | |
2267 | return err; | |
2268 | } | |
2269 | if (adapter->params.rss.mode != | |
2270 | FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) { | |
2271 | dev_err(adapter->pdev_dev, "unable to operate with global RSS" | |
2272 | " mode %d\n", adapter->params.rss.mode); | |
2273 | return -EINVAL; | |
2274 | } | |
2275 | err = t4vf_sge_init(adapter); | |
2276 | if (err) { | |
2277 | dev_err(adapter->pdev_dev, "unable to use adapter parameters:" | |
2278 | " err=%d\n", err); | |
2279 | return err; | |
2280 | } | |
2281 | ||
94dace10 VP |
2282 | /* If we're running on newer firmware, let it know that we're |
2283 | * prepared to deal with encapsulated CPL messages. Older | |
2284 | * firmware won't understand this and we'll just get | |
2285 | * unencapsulated messages ... | |
2286 | */ | |
5167865a HS |
2287 | param = FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) | |
2288 | FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_CPLFW4MSG_ENCAP); | |
94dace10 VP |
2289 | val = 1; |
2290 | (void) t4vf_set_params(adapter, 1, ¶m, &val); | |
2291 | ||
be839e39 CL |
2292 | /* |
2293 | * Retrieve our RX interrupt holdoff timer values and counter | |
2294 | * threshold values from the SGE parameters. | |
2295 | */ | |
2296 | s->timer_val[0] = core_ticks_to_us(adapter, | |
2297 | TIMERVALUE0_GET(sge_params->sge_timer_value_0_and_1)); | |
2298 | s->timer_val[1] = core_ticks_to_us(adapter, | |
2299 | TIMERVALUE1_GET(sge_params->sge_timer_value_0_and_1)); | |
2300 | s->timer_val[2] = core_ticks_to_us(adapter, | |
2301 | TIMERVALUE0_GET(sge_params->sge_timer_value_2_and_3)); | |
2302 | s->timer_val[3] = core_ticks_to_us(adapter, | |
2303 | TIMERVALUE1_GET(sge_params->sge_timer_value_2_and_3)); | |
2304 | s->timer_val[4] = core_ticks_to_us(adapter, | |
2305 | TIMERVALUE0_GET(sge_params->sge_timer_value_4_and_5)); | |
2306 | s->timer_val[5] = core_ticks_to_us(adapter, | |
2307 | TIMERVALUE1_GET(sge_params->sge_timer_value_4_and_5)); | |
2308 | ||
2309 | s->counter_val[0] = | |
2310 | THRESHOLD_0_GET(sge_params->sge_ingress_rx_threshold); | |
2311 | s->counter_val[1] = | |
2312 | THRESHOLD_1_GET(sge_params->sge_ingress_rx_threshold); | |
2313 | s->counter_val[2] = | |
2314 | THRESHOLD_2_GET(sge_params->sge_ingress_rx_threshold); | |
2315 | s->counter_val[3] = | |
2316 | THRESHOLD_3_GET(sge_params->sge_ingress_rx_threshold); | |
2317 | ||
2318 | /* | |
2319 | * Grab our Virtual Interface resource allocation, extract the | |
2320 | * features that we're interested in and do a bit of sanity testing on | |
2321 | * what we discover. | |
2322 | */ | |
2323 | err = t4vf_get_vfres(adapter); | |
2324 | if (err) { | |
2325 | dev_err(adapter->pdev_dev, "unable to get virtual interface" | |
2326 | " resources: err=%d\n", err); | |
2327 | return err; | |
2328 | } | |
2329 | ||
2330 | /* | |
2331 | * The number of "ports" which we support is equal to the number of | |
2332 | * Virtual Interfaces with which we've been provisioned. | |
2333 | */ | |
2334 | adapter->params.nports = vfres->nvi; | |
2335 | if (adapter->params.nports > MAX_NPORTS) { | |
2336 | dev_warn(adapter->pdev_dev, "only using %d of %d allowed" | |
2337 | " virtual interfaces\n", MAX_NPORTS, | |
2338 | adapter->params.nports); | |
2339 | adapter->params.nports = MAX_NPORTS; | |
2340 | } | |
2341 | ||
2342 | /* | |
2343 | * We need to reserve a number of the ingress queues with Free List | |
2344 | * and Interrupt capabilities for special interrupt purposes (like | |
2345 | * asynchronous firmware messages, or forwarded interrupts if we're | |
2346 | * using MSI). The rest of the FL/Intr-capable ingress queues will be | |
2347 | * matched up one-for-one with Ethernet/Control egress queues in order | |
2348 | * to form "Queue Sets" which will be aportioned between the "ports". | |
2349 | * For each Queue Set, we'll need the ability to allocate two Egress | |
2350 | * Contexts -- one for the Ingress Queue Free List and one for the TX | |
2351 | * Ethernet Queue. | |
2352 | */ | |
2353 | ethqsets = vfres->niqflint - INGQ_EXTRAS; | |
2354 | if (vfres->nethctrl != ethqsets) { | |
2355 | dev_warn(adapter->pdev_dev, "unequal number of [available]" | |
2356 | " ingress/egress queues (%d/%d); using minimum for" | |
2357 | " number of Queue Sets\n", ethqsets, vfres->nethctrl); | |
2358 | ethqsets = min(vfres->nethctrl, ethqsets); | |
2359 | } | |
2360 | if (vfres->neq < ethqsets*2) { | |
2361 | dev_warn(adapter->pdev_dev, "Not enough Egress Contexts (%d)" | |
2362 | " to support Queue Sets (%d); reducing allowed Queue" | |
2363 | " Sets\n", vfres->neq, ethqsets); | |
2364 | ethqsets = vfres->neq/2; | |
2365 | } | |
2366 | if (ethqsets > MAX_ETH_QSETS) { | |
2367 | dev_warn(adapter->pdev_dev, "only using %d of %d allowed Queue" | |
2368 | " Sets\n", MAX_ETH_QSETS, adapter->sge.max_ethqsets); | |
2369 | ethqsets = MAX_ETH_QSETS; | |
2370 | } | |
2371 | if (vfres->niq != 0 || vfres->neq > ethqsets*2) { | |
2372 | dev_warn(adapter->pdev_dev, "unused resources niq/neq (%d/%d)" | |
2373 | " ignored\n", vfres->niq, vfres->neq - ethqsets*2); | |
2374 | } | |
2375 | adapter->sge.max_ethqsets = ethqsets; | |
2376 | ||
2377 | /* | |
2378 | * Check for various parameter sanity issues. Most checks simply | |
2379 | * result in us using fewer resources than our provissioning but we | |
2380 | * do need at least one "port" with which to work ... | |
2381 | */ | |
2382 | if (adapter->sge.max_ethqsets < adapter->params.nports) { | |
2383 | dev_warn(adapter->pdev_dev, "only using %d of %d available" | |
2384 | " virtual interfaces (too few Queue Sets)\n", | |
2385 | adapter->sge.max_ethqsets, adapter->params.nports); | |
2386 | adapter->params.nports = adapter->sge.max_ethqsets; | |
2387 | } | |
2388 | if (adapter->params.nports == 0) { | |
2389 | dev_err(adapter->pdev_dev, "no virtual interfaces configured/" | |
2390 | "usable!\n"); | |
2391 | return -EINVAL; | |
2392 | } | |
2393 | return 0; | |
2394 | } | |
2395 | ||
2396 | static inline void init_rspq(struct sge_rspq *rspq, u8 timer_idx, | |
2397 | u8 pkt_cnt_idx, unsigned int size, | |
2398 | unsigned int iqe_size) | |
2399 | { | |
2400 | rspq->intr_params = (QINTR_TIMER_IDX(timer_idx) | | |
2401 | (pkt_cnt_idx < SGE_NCOUNTERS ? QINTR_CNT_EN : 0)); | |
2402 | rspq->pktcnt_idx = (pkt_cnt_idx < SGE_NCOUNTERS | |
2403 | ? pkt_cnt_idx | |
2404 | : 0); | |
2405 | rspq->iqe_len = iqe_size; | |
2406 | rspq->size = size; | |
2407 | } | |
2408 | ||
2409 | /* | |
2410 | * Perform default configuration of DMA queues depending on the number and | |
2411 | * type of ports we found and the number of available CPUs. Most settings can | |
2412 | * be modified by the admin via ethtool and cxgbtool prior to the adapter | |
2413 | * being brought up for the first time. | |
2414 | */ | |
d289f864 | 2415 | static void cfg_queues(struct adapter *adapter) |
be839e39 CL |
2416 | { |
2417 | struct sge *s = &adapter->sge; | |
2418 | int q10g, n10g, qidx, pidx, qs; | |
c710245c | 2419 | size_t iqe_size; |
be839e39 CL |
2420 | |
2421 | /* | |
2422 | * We should not be called till we know how many Queue Sets we can | |
2423 | * support. In particular, this means that we need to know what kind | |
2424 | * of interrupts we'll be using ... | |
2425 | */ | |
2426 | BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0); | |
2427 | ||
2428 | /* | |
2429 | * Count the number of 10GbE Virtual Interfaces that we have. | |
2430 | */ | |
2431 | n10g = 0; | |
2432 | for_each_port(adapter, pidx) | |
2433 | n10g += is_10g_port(&adap2pinfo(adapter, pidx)->link_cfg); | |
2434 | ||
2435 | /* | |
2436 | * We default to 1 queue per non-10G port and up to # of cores queues | |
2437 | * per 10G port. | |
2438 | */ | |
2439 | if (n10g == 0) | |
2440 | q10g = 0; | |
2441 | else { | |
2442 | int n1g = (adapter->params.nports - n10g); | |
2443 | q10g = (adapter->sge.max_ethqsets - n1g) / n10g; | |
2444 | if (q10g > num_online_cpus()) | |
2445 | q10g = num_online_cpus(); | |
2446 | } | |
2447 | ||
2448 | /* | |
2449 | * Allocate the "Queue Sets" to the various Virtual Interfaces. | |
2450 | * The layout will be established in setup_sge_queues() when the | |
2451 | * adapter is brough up for the first time. | |
2452 | */ | |
2453 | qidx = 0; | |
2454 | for_each_port(adapter, pidx) { | |
2455 | struct port_info *pi = adap2pinfo(adapter, pidx); | |
2456 | ||
2457 | pi->first_qset = qidx; | |
897d55df | 2458 | pi->nqsets = is_x_10g_port(&pi->link_cfg) ? q10g : 1; |
be839e39 CL |
2459 | qidx += pi->nqsets; |
2460 | } | |
2461 | s->ethqsets = qidx; | |
2462 | ||
c710245c CL |
2463 | /* |
2464 | * The Ingress Queue Entry Size for our various Response Queues needs | |
2465 | * to be big enough to accommodate the largest message we can receive | |
2466 | * from the chip/firmware; which is 64 bytes ... | |
2467 | */ | |
2468 | iqe_size = 64; | |
2469 | ||
be839e39 CL |
2470 | /* |
2471 | * Set up default Queue Set parameters ... Start off with the | |
2472 | * shortest interrupt holdoff timer. | |
2473 | */ | |
2474 | for (qs = 0; qs < s->max_ethqsets; qs++) { | |
2475 | struct sge_eth_rxq *rxq = &s->ethrxq[qs]; | |
2476 | struct sge_eth_txq *txq = &s->ethtxq[qs]; | |
2477 | ||
c710245c | 2478 | init_rspq(&rxq->rspq, 0, 0, 1024, iqe_size); |
be839e39 CL |
2479 | rxq->fl.size = 72; |
2480 | txq->q.size = 1024; | |
2481 | } | |
2482 | ||
2483 | /* | |
2484 | * The firmware event queue is used for link state changes and | |
2485 | * notifications of TX DMA completions. | |
2486 | */ | |
c710245c | 2487 | init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512, iqe_size); |
be839e39 CL |
2488 | |
2489 | /* | |
2490 | * The forwarded interrupt queue is used when we're in MSI interrupt | |
2491 | * mode. In this mode all interrupts associated with RX queues will | |
2492 | * be forwarded to a single queue which we'll associate with our MSI | |
2493 | * interrupt vector. The messages dropped in the forwarded interrupt | |
2494 | * queue will indicate which ingress queue needs servicing ... This | |
2495 | * queue needs to be large enough to accommodate all of the ingress | |
2496 | * queues which are forwarding their interrupt (+1 to prevent the PIDX | |
2497 | * from equalling the CIDX if every ingress queue has an outstanding | |
2498 | * interrupt). The queue doesn't need to be any larger because no | |
2499 | * ingress queue will ever have more than one outstanding interrupt at | |
2500 | * any time ... | |
2501 | */ | |
2502 | init_rspq(&s->intrq, SGE_TIMER_RSTRT_CNTR, 0, MSIX_ENTRIES + 1, | |
c710245c | 2503 | iqe_size); |
be839e39 CL |
2504 | } |
2505 | ||
2506 | /* | |
2507 | * Reduce the number of Ethernet queues across all ports to at most n. | |
2508 | * n provides at least one queue per port. | |
2509 | */ | |
d289f864 | 2510 | static void reduce_ethqs(struct adapter *adapter, int n) |
be839e39 CL |
2511 | { |
2512 | int i; | |
2513 | struct port_info *pi; | |
2514 | ||
2515 | /* | |
2516 | * While we have too many active Ether Queue Sets, interate across the | |
2517 | * "ports" and reduce their individual Queue Set allocations. | |
2518 | */ | |
2519 | BUG_ON(n < adapter->params.nports); | |
2520 | while (n < adapter->sge.ethqsets) | |
2521 | for_each_port(adapter, i) { | |
2522 | pi = adap2pinfo(adapter, i); | |
2523 | if (pi->nqsets > 1) { | |
2524 | pi->nqsets--; | |
2525 | adapter->sge.ethqsets--; | |
2526 | if (adapter->sge.ethqsets <= n) | |
2527 | break; | |
2528 | } | |
2529 | } | |
2530 | ||
2531 | /* | |
2532 | * Reassign the starting Queue Sets for each of the "ports" ... | |
2533 | */ | |
2534 | n = 0; | |
2535 | for_each_port(adapter, i) { | |
2536 | pi = adap2pinfo(adapter, i); | |
2537 | pi->first_qset = n; | |
2538 | n += pi->nqsets; | |
2539 | } | |
2540 | } | |
2541 | ||
2542 | /* | |
2543 | * We need to grab enough MSI-X vectors to cover our interrupt needs. Ideally | |
2544 | * we get a separate MSI-X vector for every "Queue Set" plus any extras we | |
2545 | * need. Minimally we need one for every Virtual Interface plus those needed | |
2546 | * for our "extras". Note that this process may lower the maximum number of | |
2547 | * allowed Queue Sets ... | |
2548 | */ | |
d289f864 | 2549 | static int enable_msix(struct adapter *adapter) |
be839e39 | 2550 | { |
bd663689 | 2551 | int i, want, need, nqsets; |
be839e39 CL |
2552 | struct msix_entry entries[MSIX_ENTRIES]; |
2553 | struct sge *s = &adapter->sge; | |
2554 | ||
2555 | for (i = 0; i < MSIX_ENTRIES; ++i) | |
2556 | entries[i].entry = i; | |
2557 | ||
2558 | /* | |
2559 | * We _want_ enough MSI-X interrupts to cover all of our "Queue Sets" | |
2560 | * plus those needed for our "extras" (for example, the firmware | |
2561 | * message queue). We _need_ at least one "Queue Set" per Virtual | |
2562 | * Interface plus those needed for our "extras". So now we get to see | |
2563 | * if the song is right ... | |
2564 | */ | |
2565 | want = s->max_ethqsets + MSIX_EXTRAS; | |
2566 | need = adapter->params.nports + MSIX_EXTRAS; | |
bd663689 AG |
2567 | |
2568 | want = pci_enable_msix_range(adapter->pdev, entries, need, want); | |
2569 | if (want < 0) | |
2570 | return want; | |
2571 | ||
2572 | nqsets = want - MSIX_EXTRAS; | |
2573 | if (nqsets < s->max_ethqsets) { | |
2574 | dev_warn(adapter->pdev_dev, "only enough MSI-X vectors" | |
2575 | " for %d Queue Sets\n", nqsets); | |
2576 | s->max_ethqsets = nqsets; | |
2577 | if (nqsets < s->ethqsets) | |
2578 | reduce_ethqs(adapter, nqsets); | |
be839e39 | 2579 | } |
bd663689 AG |
2580 | for (i = 0; i < want; ++i) |
2581 | adapter->msix_info[i].vec = entries[i].vector; | |
2582 | ||
2583 | return 0; | |
be839e39 CL |
2584 | } |
2585 | ||
be839e39 CL |
2586 | static const struct net_device_ops cxgb4vf_netdev_ops = { |
2587 | .ndo_open = cxgb4vf_open, | |
2588 | .ndo_stop = cxgb4vf_stop, | |
2589 | .ndo_start_xmit = t4vf_eth_xmit, | |
2590 | .ndo_get_stats = cxgb4vf_get_stats, | |
2591 | .ndo_set_rx_mode = cxgb4vf_set_rxmode, | |
2592 | .ndo_set_mac_address = cxgb4vf_set_mac_addr, | |
be839e39 CL |
2593 | .ndo_validate_addr = eth_validate_addr, |
2594 | .ndo_do_ioctl = cxgb4vf_do_ioctl, | |
2595 | .ndo_change_mtu = cxgb4vf_change_mtu, | |
87737663 JP |
2596 | .ndo_fix_features = cxgb4vf_fix_features, |
2597 | .ndo_set_features = cxgb4vf_set_features, | |
be839e39 CL |
2598 | #ifdef CONFIG_NET_POLL_CONTROLLER |
2599 | .ndo_poll_controller = cxgb4vf_poll_controller, | |
2600 | #endif | |
2601 | }; | |
be839e39 CL |
2602 | |
2603 | /* | |
2604 | * "Probe" a device: initialize a device and construct all kernel and driver | |
2605 | * state needed to manage the device. This routine is called "init_one" in | |
2606 | * the PF Driver ... | |
2607 | */ | |
d289f864 | 2608 | static int cxgb4vf_pci_probe(struct pci_dev *pdev, |
1dd06ae8 | 2609 | const struct pci_device_id *ent) |
be839e39 | 2610 | { |
be839e39 CL |
2611 | int pci_using_dac; |
2612 | int err, pidx; | |
2613 | unsigned int pmask; | |
2614 | struct adapter *adapter; | |
2615 | struct port_info *pi; | |
2616 | struct net_device *netdev; | |
2617 | ||
be839e39 CL |
2618 | /* |
2619 | * Print our driver banner the first time we're called to initialize a | |
2620 | * device. | |
2621 | */ | |
428ac43f | 2622 | pr_info_once("%s - version %s\n", DRV_DESC, DRV_VERSION); |
be839e39 CL |
2623 | |
2624 | /* | |
7a0c2029 | 2625 | * Initialize generic PCI device state. |
be839e39 | 2626 | */ |
7a0c2029 | 2627 | err = pci_enable_device(pdev); |
be839e39 | 2628 | if (err) { |
7a0c2029 | 2629 | dev_err(&pdev->dev, "cannot enable PCI device\n"); |
be839e39 CL |
2630 | return err; |
2631 | } | |
2632 | ||
2633 | /* | |
7a0c2029 KV |
2634 | * Reserve PCI resources for the device. If we can't get them some |
2635 | * other driver may have already claimed the device ... | |
be839e39 | 2636 | */ |
7a0c2029 | 2637 | err = pci_request_regions(pdev, KBUILD_MODNAME); |
be839e39 | 2638 | if (err) { |
7a0c2029 KV |
2639 | dev_err(&pdev->dev, "cannot obtain PCI resources\n"); |
2640 | goto err_disable_device; | |
be839e39 CL |
2641 | } |
2642 | ||
2643 | /* | |
2644 | * Set up our DMA mask: try for 64-bit address masking first and | |
2645 | * fall back to 32-bit if we can't get 64 bits ... | |
2646 | */ | |
2647 | err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); | |
2648 | if (err == 0) { | |
2649 | err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); | |
2650 | if (err) { | |
2651 | dev_err(&pdev->dev, "unable to obtain 64-bit DMA for" | |
2652 | " coherent allocations\n"); | |
7a0c2029 | 2653 | goto err_release_regions; |
be839e39 CL |
2654 | } |
2655 | pci_using_dac = 1; | |
2656 | } else { | |
2657 | err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); | |
2658 | if (err != 0) { | |
2659 | dev_err(&pdev->dev, "no usable DMA configuration\n"); | |
7a0c2029 | 2660 | goto err_release_regions; |
be839e39 CL |
2661 | } |
2662 | pci_using_dac = 0; | |
2663 | } | |
2664 | ||
2665 | /* | |
2666 | * Enable bus mastering for the device ... | |
2667 | */ | |
2668 | pci_set_master(pdev); | |
2669 | ||
2670 | /* | |
2671 | * Allocate our adapter data structure and attach it to the device. | |
2672 | */ | |
2673 | adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); | |
2674 | if (!adapter) { | |
2675 | err = -ENOMEM; | |
7a0c2029 | 2676 | goto err_release_regions; |
be839e39 CL |
2677 | } |
2678 | pci_set_drvdata(pdev, adapter); | |
2679 | adapter->pdev = pdev; | |
2680 | adapter->pdev_dev = &pdev->dev; | |
2681 | ||
2682 | /* | |
2683 | * Initialize SMP data synchronization resources. | |
2684 | */ | |
2685 | spin_lock_init(&adapter->stats_lock); | |
2686 | ||
2687 | /* | |
2688 | * Map our I/O registers in BAR0. | |
2689 | */ | |
2690 | adapter->regs = pci_ioremap_bar(pdev, 0); | |
2691 | if (!adapter->regs) { | |
2692 | dev_err(&pdev->dev, "cannot map device registers\n"); | |
2693 | err = -ENOMEM; | |
2694 | goto err_free_adapter; | |
2695 | } | |
2696 | ||
e0a8b34a HS |
2697 | /* Wait for the device to become ready before proceeding ... |
2698 | */ | |
2699 | err = t4vf_prep_adapter(adapter); | |
2700 | if (err) { | |
2701 | dev_err(adapter->pdev_dev, "device didn't become ready:" | |
2702 | " err=%d\n", err); | |
2703 | goto err_unmap_bar0; | |
2704 | } | |
2705 | ||
2706 | /* For T5 and later we want to use the new BAR-based User Doorbells, | |
2707 | * so we need to map BAR2 here ... | |
2708 | */ | |
2709 | if (!is_t4(adapter->params.chip)) { | |
2710 | adapter->bar2 = ioremap_wc(pci_resource_start(pdev, 2), | |
2711 | pci_resource_len(pdev, 2)); | |
2712 | if (!adapter->bar2) { | |
2713 | dev_err(adapter->pdev_dev, "cannot map BAR2 doorbells\n"); | |
2714 | err = -ENOMEM; | |
2715 | goto err_unmap_bar0; | |
2716 | } | |
2717 | } | |
be839e39 CL |
2718 | /* |
2719 | * Initialize adapter level features. | |
2720 | */ | |
2721 | adapter->name = pci_name(pdev); | |
2722 | adapter->msg_enable = dflt_msg_enable; | |
2723 | err = adap_init0(adapter); | |
2724 | if (err) | |
2725 | goto err_unmap_bar; | |
2726 | ||
2727 | /* | |
2728 | * Allocate our "adapter ports" and stitch everything together. | |
2729 | */ | |
2730 | pmask = adapter->params.vfres.pmask; | |
2731 | for_each_port(adapter, pidx) { | |
2732 | int port_id, viid; | |
2733 | ||
2734 | /* | |
2735 | * We simplistically allocate our virtual interfaces | |
2736 | * sequentially across the port numbers to which we have | |
2737 | * access rights. This should be configurable in some manner | |
2738 | * ... | |
2739 | */ | |
2740 | if (pmask == 0) | |
2741 | break; | |
2742 | port_id = ffs(pmask) - 1; | |
2743 | pmask &= ~(1 << port_id); | |
2744 | viid = t4vf_alloc_vi(adapter, port_id); | |
2745 | if (viid < 0) { | |
2746 | dev_err(&pdev->dev, "cannot allocate VI for port %d:" | |
2747 | " err=%d\n", port_id, viid); | |
2748 | err = viid; | |
2749 | goto err_free_dev; | |
2750 | } | |
2751 | ||
2752 | /* | |
2753 | * Allocate our network device and stitch things together. | |
2754 | */ | |
2755 | netdev = alloc_etherdev_mq(sizeof(struct port_info), | |
2756 | MAX_PORT_QSETS); | |
2757 | if (netdev == NULL) { | |
be839e39 CL |
2758 | t4vf_free_vi(adapter, viid); |
2759 | err = -ENOMEM; | |
2760 | goto err_free_dev; | |
2761 | } | |
2762 | adapter->port[pidx] = netdev; | |
2763 | SET_NETDEV_DEV(netdev, &pdev->dev); | |
2764 | pi = netdev_priv(netdev); | |
2765 | pi->adapter = adapter; | |
2766 | pi->pidx = pidx; | |
2767 | pi->port_id = port_id; | |
2768 | pi->viid = viid; | |
2769 | ||
2770 | /* | |
2771 | * Initialize the starting state of our "port" and register | |
2772 | * it. | |
2773 | */ | |
2774 | pi->xact_addr_filt = -1; | |
be839e39 | 2775 | netif_carrier_off(netdev); |
be839e39 CL |
2776 | netdev->irq = pdev->irq; |
2777 | ||
2ed28baa MM |
2778 | netdev->hw_features = NETIF_F_SG | TSO_FLAGS | |
2779 | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | | |
f646968f | 2780 | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_RXCSUM; |
2ed28baa MM |
2781 | netdev->vlan_features = NETIF_F_SG | TSO_FLAGS | |
2782 | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | | |
2783 | NETIF_F_HIGHDMA; | |
f646968f PM |
2784 | netdev->features = netdev->hw_features | |
2785 | NETIF_F_HW_VLAN_CTAG_TX; | |
be839e39 CL |
2786 | if (pci_using_dac) |
2787 | netdev->features |= NETIF_F_HIGHDMA; | |
be839e39 | 2788 | |
01789349 JP |
2789 | netdev->priv_flags |= IFF_UNICAST_FLT; |
2790 | ||
be839e39 | 2791 | netdev->netdev_ops = &cxgb4vf_netdev_ops; |
7ad24ea4 | 2792 | netdev->ethtool_ops = &cxgb4vf_ethtool_ops; |
be839e39 CL |
2793 | |
2794 | /* | |
2795 | * Initialize the hardware/software state for the port. | |
2796 | */ | |
2797 | err = t4vf_port_init(adapter, pidx); | |
2798 | if (err) { | |
2799 | dev_err(&pdev->dev, "cannot initialize port %d\n", | |
2800 | pidx); | |
2801 | goto err_free_dev; | |
2802 | } | |
2803 | } | |
2804 | ||
2805 | /* | |
2806 | * The "card" is now ready to go. If any errors occur during device | |
2807 | * registration we do not fail the whole "card" but rather proceed | |
2808 | * only with the ports we manage to register successfully. However we | |
2809 | * must register at least one net device. | |
2810 | */ | |
2811 | for_each_port(adapter, pidx) { | |
2812 | netdev = adapter->port[pidx]; | |
2813 | if (netdev == NULL) | |
2814 | continue; | |
2815 | ||
2816 | err = register_netdev(netdev); | |
2817 | if (err) { | |
2818 | dev_warn(&pdev->dev, "cannot register net device %s," | |
2819 | " skipping\n", netdev->name); | |
2820 | continue; | |
2821 | } | |
2822 | ||
2823 | set_bit(pidx, &adapter->registered_device_map); | |
2824 | } | |
2825 | if (adapter->registered_device_map == 0) { | |
2826 | dev_err(&pdev->dev, "could not register any net devices\n"); | |
2827 | goto err_free_dev; | |
2828 | } | |
2829 | ||
2830 | /* | |
2831 | * Set up our debugfs entries. | |
2832 | */ | |
843635e0 | 2833 | if (!IS_ERR_OR_NULL(cxgb4vf_debugfs_root)) { |
be839e39 CL |
2834 | adapter->debugfs_root = |
2835 | debugfs_create_dir(pci_name(pdev), | |
2836 | cxgb4vf_debugfs_root); | |
843635e0 | 2837 | if (IS_ERR_OR_NULL(adapter->debugfs_root)) |
be839e39 CL |
2838 | dev_warn(&pdev->dev, "could not create debugfs" |
2839 | " directory"); | |
2840 | else | |
2841 | setup_debugfs(adapter); | |
2842 | } | |
2843 | ||
2844 | /* | |
2845 | * See what interrupts we'll be using. If we've been configured to | |
2846 | * use MSI-X interrupts, try to enable them but fall back to using | |
2847 | * MSI interrupts if we can't enable MSI-X interrupts. If we can't | |
2848 | * get MSI interrupts we bail with the error. | |
2849 | */ | |
2850 | if (msi == MSI_MSIX && enable_msix(adapter) == 0) | |
2851 | adapter->flags |= USING_MSIX; | |
2852 | else { | |
2853 | err = pci_enable_msi(pdev); | |
2854 | if (err) { | |
2855 | dev_err(&pdev->dev, "Unable to allocate %s interrupts;" | |
2856 | " err=%d\n", | |
2857 | msi == MSI_MSIX ? "MSI-X or MSI" : "MSI", err); | |
2858 | goto err_free_debugfs; | |
2859 | } | |
2860 | adapter->flags |= USING_MSI; | |
2861 | } | |
2862 | ||
2863 | /* | |
2864 | * Now that we know how many "ports" we have and what their types are, | |
2865 | * and how many Queue Sets we can support, we can configure our queue | |
2866 | * resources. | |
2867 | */ | |
2868 | cfg_queues(adapter); | |
2869 | ||
2870 | /* | |
25985edc | 2871 | * Print a short notice on the existence and configuration of the new |
be839e39 CL |
2872 | * VF network device ... |
2873 | */ | |
2874 | for_each_port(adapter, pidx) { | |
2875 | dev_info(adapter->pdev_dev, "%s: Chelsio VF NIC PCIe %s\n", | |
2876 | adapter->port[pidx]->name, | |
2877 | (adapter->flags & USING_MSIX) ? "MSI-X" : | |
2878 | (adapter->flags & USING_MSI) ? "MSI" : ""); | |
2879 | } | |
2880 | ||
2881 | /* | |
2882 | * Return success! | |
2883 | */ | |
2884 | return 0; | |
2885 | ||
2886 | /* | |
2887 | * Error recovery and exit code. Unwind state that's been created | |
2888 | * so far and return the error. | |
2889 | */ | |
2890 | ||
2891 | err_free_debugfs: | |
843635e0 | 2892 | if (!IS_ERR_OR_NULL(adapter->debugfs_root)) { |
be839e39 CL |
2893 | cleanup_debugfs(adapter); |
2894 | debugfs_remove_recursive(adapter->debugfs_root); | |
2895 | } | |
2896 | ||
2897 | err_free_dev: | |
2898 | for_each_port(adapter, pidx) { | |
2899 | netdev = adapter->port[pidx]; | |
2900 | if (netdev == NULL) | |
2901 | continue; | |
2902 | pi = netdev_priv(netdev); | |
2903 | t4vf_free_vi(adapter, pi->viid); | |
2904 | if (test_bit(pidx, &adapter->registered_device_map)) | |
2905 | unregister_netdev(netdev); | |
2906 | free_netdev(netdev); | |
2907 | } | |
2908 | ||
2909 | err_unmap_bar: | |
e0a8b34a HS |
2910 | if (!is_t4(adapter->params.chip)) |
2911 | iounmap(adapter->bar2); | |
2912 | ||
2913 | err_unmap_bar0: | |
be839e39 CL |
2914 | iounmap(adapter->regs); |
2915 | ||
2916 | err_free_adapter: | |
2917 | kfree(adapter); | |
be839e39 | 2918 | |
be839e39 CL |
2919 | err_release_regions: |
2920 | pci_release_regions(pdev); | |
7a0c2029 KV |
2921 | pci_clear_master(pdev); |
2922 | ||
2923 | err_disable_device: | |
2924 | pci_disable_device(pdev); | |
be839e39 | 2925 | |
be839e39 CL |
2926 | return err; |
2927 | } | |
2928 | ||
2929 | /* | |
2930 | * "Remove" a device: tear down all kernel and driver state created in the | |
2931 | * "probe" routine and quiesce the device (disable interrupts, etc.). (Note | |
2932 | * that this is called "remove_one" in the PF Driver.) | |
2933 | */ | |
d289f864 | 2934 | static void cxgb4vf_pci_remove(struct pci_dev *pdev) |
be839e39 CL |
2935 | { |
2936 | struct adapter *adapter = pci_get_drvdata(pdev); | |
2937 | ||
2938 | /* | |
2939 | * Tear down driver state associated with device. | |
2940 | */ | |
2941 | if (adapter) { | |
2942 | int pidx; | |
2943 | ||
2944 | /* | |
2945 | * Stop all of our activity. Unregister network port, | |
2946 | * disable interrupts, etc. | |
2947 | */ | |
2948 | for_each_port(adapter, pidx) | |
2949 | if (test_bit(pidx, &adapter->registered_device_map)) | |
2950 | unregister_netdev(adapter->port[pidx]); | |
2951 | t4vf_sge_stop(adapter); | |
2952 | if (adapter->flags & USING_MSIX) { | |
2953 | pci_disable_msix(adapter->pdev); | |
2954 | adapter->flags &= ~USING_MSIX; | |
2955 | } else if (adapter->flags & USING_MSI) { | |
2956 | pci_disable_msi(adapter->pdev); | |
2957 | adapter->flags &= ~USING_MSI; | |
2958 | } | |
2959 | ||
2960 | /* | |
2961 | * Tear down our debugfs entries. | |
2962 | */ | |
843635e0 | 2963 | if (!IS_ERR_OR_NULL(adapter->debugfs_root)) { |
be839e39 CL |
2964 | cleanup_debugfs(adapter); |
2965 | debugfs_remove_recursive(adapter->debugfs_root); | |
2966 | } | |
2967 | ||
2968 | /* | |
2969 | * Free all of the various resources which we've acquired ... | |
2970 | */ | |
2971 | t4vf_free_sge_resources(adapter); | |
2972 | for_each_port(adapter, pidx) { | |
2973 | struct net_device *netdev = adapter->port[pidx]; | |
2974 | struct port_info *pi; | |
2975 | ||
2976 | if (netdev == NULL) | |
2977 | continue; | |
2978 | ||
2979 | pi = netdev_priv(netdev); | |
2980 | t4vf_free_vi(adapter, pi->viid); | |
2981 | free_netdev(netdev); | |
2982 | } | |
2983 | iounmap(adapter->regs); | |
e0a8b34a HS |
2984 | if (!is_t4(adapter->params.chip)) |
2985 | iounmap(adapter->bar2); | |
be839e39 | 2986 | kfree(adapter); |
be839e39 CL |
2987 | } |
2988 | ||
2989 | /* | |
2990 | * Disable the device and release its PCI resources. | |
2991 | */ | |
2992 | pci_disable_device(pdev); | |
2993 | pci_clear_master(pdev); | |
2994 | pci_release_regions(pdev); | |
2995 | } | |
2996 | ||
7e9c2629 CL |
2997 | /* |
2998 | * "Shutdown" quiesce the device, stopping Ingress Packet and Interrupt | |
2999 | * delivery. | |
3000 | */ | |
d289f864 | 3001 | static void cxgb4vf_pci_shutdown(struct pci_dev *pdev) |
7e9c2629 CL |
3002 | { |
3003 | struct adapter *adapter; | |
3004 | int pidx; | |
3005 | ||
3006 | adapter = pci_get_drvdata(pdev); | |
3007 | if (!adapter) | |
3008 | return; | |
3009 | ||
c2a19856 | 3010 | /* Disable all Virtual Interfaces. This will shut down the |
7e9c2629 CL |
3011 | * delivery of all ingress packets into the chip for these |
3012 | * Virtual Interfaces. | |
3013 | */ | |
c2a19856 HS |
3014 | for_each_port(adapter, pidx) |
3015 | if (test_bit(pidx, &adapter->registered_device_map)) | |
3016 | unregister_netdev(adapter->port[pidx]); | |
7e9c2629 | 3017 | |
c2a19856 HS |
3018 | /* Free up all Queues which will prevent further DMA and |
3019 | * Interrupts allowing various internal pathways to drain. | |
3020 | */ | |
3021 | t4vf_sge_stop(adapter); | |
3022 | if (adapter->flags & USING_MSIX) { | |
3023 | pci_disable_msix(adapter->pdev); | |
3024 | adapter->flags &= ~USING_MSIX; | |
3025 | } else if (adapter->flags & USING_MSI) { | |
3026 | pci_disable_msi(adapter->pdev); | |
3027 | adapter->flags &= ~USING_MSI; | |
7e9c2629 CL |
3028 | } |
3029 | ||
3030 | /* | |
3031 | * Free up all Queues which will prevent further DMA and | |
3032 | * Interrupts allowing various internal pathways to drain. | |
3033 | */ | |
3034 | t4vf_free_sge_resources(adapter); | |
c2a19856 | 3035 | pci_set_drvdata(pdev, NULL); |
7e9c2629 CL |
3036 | } |
3037 | ||
3fedeab1 HS |
3038 | /* Macros needed to support the PCI Device ID Table ... |
3039 | */ | |
3040 | #define CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN \ | |
3041 | static struct pci_device_id cxgb4vf_pci_tbl[] = { | |
3042 | #define CH_PCI_DEVICE_ID_FUNCTION 0x8 | |
3043 | ||
3044 | #define CH_PCI_ID_TABLE_ENTRY(devid) \ | |
3045 | { PCI_VDEVICE(CHELSIO, (devid)), 0 } | |
3046 | ||
3047 | #define CH_PCI_DEVICE_ID_TABLE_DEFINE_END { 0, } } | |
3048 | ||
3049 | #include "../cxgb4/t4_pci_id_tbl.h" | |
be839e39 CL |
3050 | |
3051 | MODULE_DESCRIPTION(DRV_DESC); | |
3052 | MODULE_AUTHOR("Chelsio Communications"); | |
3053 | MODULE_LICENSE("Dual BSD/GPL"); | |
3054 | MODULE_VERSION(DRV_VERSION); | |
3055 | MODULE_DEVICE_TABLE(pci, cxgb4vf_pci_tbl); | |
3056 | ||
3057 | static struct pci_driver cxgb4vf_driver = { | |
3058 | .name = KBUILD_MODNAME, | |
3059 | .id_table = cxgb4vf_pci_tbl, | |
3060 | .probe = cxgb4vf_pci_probe, | |
d289f864 BP |
3061 | .remove = cxgb4vf_pci_remove, |
3062 | .shutdown = cxgb4vf_pci_shutdown, | |
be839e39 CL |
3063 | }; |
3064 | ||
3065 | /* | |
3066 | * Initialize global driver state. | |
3067 | */ | |
3068 | static int __init cxgb4vf_module_init(void) | |
3069 | { | |
3070 | int ret; | |
3071 | ||
bb14a1af CL |
3072 | /* |
3073 | * Vet our module parameters. | |
3074 | */ | |
3075 | if (msi != MSI_MSIX && msi != MSI_MSI) { | |
428ac43f JP |
3076 | pr_warn("bad module parameter msi=%d; must be %d (MSI-X or MSI) or %d (MSI)\n", |
3077 | msi, MSI_MSIX, MSI_MSI); | |
bb14a1af CL |
3078 | return -EINVAL; |
3079 | } | |
3080 | ||
be839e39 CL |
3081 | /* Debugfs support is optional, just warn if this fails */ |
3082 | cxgb4vf_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); | |
843635e0 | 3083 | if (IS_ERR_OR_NULL(cxgb4vf_debugfs_root)) |
428ac43f | 3084 | pr_warn("could not create debugfs entry, continuing\n"); |
be839e39 CL |
3085 | |
3086 | ret = pci_register_driver(&cxgb4vf_driver); | |
843635e0 | 3087 | if (ret < 0 && !IS_ERR_OR_NULL(cxgb4vf_debugfs_root)) |
be839e39 CL |
3088 | debugfs_remove(cxgb4vf_debugfs_root); |
3089 | return ret; | |
3090 | } | |
3091 | ||
3092 | /* | |
3093 | * Tear down global driver state. | |
3094 | */ | |
3095 | static void __exit cxgb4vf_module_exit(void) | |
3096 | { | |
3097 | pci_unregister_driver(&cxgb4vf_driver); | |
3098 | debugfs_remove(cxgb4vf_debugfs_root); | |
3099 | } | |
3100 | ||
3101 | module_init(cxgb4vf_module_init); | |
3102 | module_exit(cxgb4vf_module_exit); |