]>
Commit | Line | Data |
---|---|---|
8a3b7a25 DB |
1 | /* |
2 | * Xilinx Axi Ethernet device driver | |
3 | * | |
4 | * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi | |
5 | * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. <dhlii@dlasys.net> | |
6 | * Copyright (c) 2008-2009 Secret Lab Technologies Ltd. | |
7 | * Copyright (c) 2010 Xilinx, Inc. All rights reserved. | |
8 | * Copyright (c) 2012 Daniel Borkmann, <daniel.borkmann@tik.ee.ethz.ch> | |
9 | * Copyright (c) 2012 Ariane Keller, <ariane.keller@tik.ee.ethz.ch> | |
10 | * | |
11 | * This is a driver for the Xilinx Axi Ethernet which is used in the Virtex6 | |
12 | * and Spartan6. | |
13 | * | |
14 | * TODO: | |
15 | * - Add Axi Fifo support. | |
16 | * - Factor out Axi DMA code into separate driver. | |
17 | * - Test and fix basic multicast filtering. | |
18 | * - Add support for extended multicast filtering. | |
19 | * - Test basic VLAN support. | |
20 | * - Add support for extended VLAN support. | |
21 | */ | |
22 | ||
23 | #include <linux/delay.h> | |
24 | #include <linux/etherdevice.h> | |
25 | #include <linux/init.h> | |
26 | #include <linux/module.h> | |
27 | #include <linux/netdevice.h> | |
28 | #include <linux/of_mdio.h> | |
29 | #include <linux/of_platform.h> | |
30 | #include <linux/of_address.h> | |
31 | #include <linux/skbuff.h> | |
32 | #include <linux/spinlock.h> | |
33 | #include <linux/phy.h> | |
34 | #include <linux/mii.h> | |
35 | #include <linux/ethtool.h> | |
36 | ||
37 | #include "xilinx_axienet.h" | |
38 | ||
39 | /* Descriptors defines for Tx and Rx DMA - 2^n for the best performance */ | |
40 | #define TX_BD_NUM 64 | |
41 | #define RX_BD_NUM 128 | |
42 | ||
43 | /* Must be shorter than length of ethtool_drvinfo.driver field to fit */ | |
44 | #define DRIVER_NAME "xaxienet" | |
45 | #define DRIVER_DESCRIPTION "Xilinx Axi Ethernet driver" | |
46 | #define DRIVER_VERSION "1.00a" | |
47 | ||
48 | #define AXIENET_REGS_N 32 | |
49 | ||
50 | /* Match table for of_platform binding */ | |
51 | static struct of_device_id axienet_of_match[] __devinitdata = { | |
52 | { .compatible = "xlnx,axi-ethernet-1.00.a", }, | |
53 | { .compatible = "xlnx,axi-ethernet-1.01.a", }, | |
54 | { .compatible = "xlnx,axi-ethernet-2.01.a", }, | |
55 | {}, | |
56 | }; | |
57 | ||
58 | MODULE_DEVICE_TABLE(of, axienet_of_match); | |
59 | ||
60 | /* Option table for setting up Axi Ethernet hardware options */ | |
61 | static struct axienet_option axienet_options[] = { | |
62 | /* Turn on jumbo packet support for both Rx and Tx */ | |
63 | { | |
64 | .opt = XAE_OPTION_JUMBO, | |
65 | .reg = XAE_TC_OFFSET, | |
66 | .m_or = XAE_TC_JUM_MASK, | |
67 | }, { | |
68 | .opt = XAE_OPTION_JUMBO, | |
69 | .reg = XAE_RCW1_OFFSET, | |
70 | .m_or = XAE_RCW1_JUM_MASK, | |
71 | }, { /* Turn on VLAN packet support for both Rx and Tx */ | |
72 | .opt = XAE_OPTION_VLAN, | |
73 | .reg = XAE_TC_OFFSET, | |
74 | .m_or = XAE_TC_VLAN_MASK, | |
75 | }, { | |
76 | .opt = XAE_OPTION_VLAN, | |
77 | .reg = XAE_RCW1_OFFSET, | |
78 | .m_or = XAE_RCW1_VLAN_MASK, | |
79 | }, { /* Turn on FCS stripping on receive packets */ | |
80 | .opt = XAE_OPTION_FCS_STRIP, | |
81 | .reg = XAE_RCW1_OFFSET, | |
82 | .m_or = XAE_RCW1_FCS_MASK, | |
83 | }, { /* Turn on FCS insertion on transmit packets */ | |
84 | .opt = XAE_OPTION_FCS_INSERT, | |
85 | .reg = XAE_TC_OFFSET, | |
86 | .m_or = XAE_TC_FCS_MASK, | |
87 | }, { /* Turn off length/type field checking on receive packets */ | |
88 | .opt = XAE_OPTION_LENTYPE_ERR, | |
89 | .reg = XAE_RCW1_OFFSET, | |
90 | .m_or = XAE_RCW1_LT_DIS_MASK, | |
91 | }, { /* Turn on Rx flow control */ | |
92 | .opt = XAE_OPTION_FLOW_CONTROL, | |
93 | .reg = XAE_FCC_OFFSET, | |
94 | .m_or = XAE_FCC_FCRX_MASK, | |
95 | }, { /* Turn on Tx flow control */ | |
96 | .opt = XAE_OPTION_FLOW_CONTROL, | |
97 | .reg = XAE_FCC_OFFSET, | |
98 | .m_or = XAE_FCC_FCTX_MASK, | |
99 | }, { /* Turn on promiscuous frame filtering */ | |
100 | .opt = XAE_OPTION_PROMISC, | |
101 | .reg = XAE_FMI_OFFSET, | |
102 | .m_or = XAE_FMI_PM_MASK, | |
103 | }, { /* Enable transmitter */ | |
104 | .opt = XAE_OPTION_TXEN, | |
105 | .reg = XAE_TC_OFFSET, | |
106 | .m_or = XAE_TC_TX_MASK, | |
107 | }, { /* Enable receiver */ | |
108 | .opt = XAE_OPTION_RXEN, | |
109 | .reg = XAE_RCW1_OFFSET, | |
110 | .m_or = XAE_RCW1_RX_MASK, | |
111 | }, | |
112 | {} | |
113 | }; | |
114 | ||
115 | /** | |
116 | * axienet_dma_in32 - Memory mapped Axi DMA register read | |
117 | * @lp: Pointer to axienet local structure | |
118 | * @reg: Address offset from the base address of the Axi DMA core | |
119 | * | |
120 | * returns: The contents of the Axi DMA register | |
121 | * | |
122 | * This function returns the contents of the corresponding Axi DMA register. | |
123 | */ | |
124 | static inline u32 axienet_dma_in32(struct axienet_local *lp, off_t reg) | |
125 | { | |
126 | return in_be32(lp->dma_regs + reg); | |
127 | } | |
128 | ||
129 | /** | |
130 | * axienet_dma_out32 - Memory mapped Axi DMA register write. | |
131 | * @lp: Pointer to axienet local structure | |
132 | * @reg: Address offset from the base address of the Axi DMA core | |
133 | * @value: Value to be written into the Axi DMA register | |
134 | * | |
135 | * This function writes the desired value into the corresponding Axi DMA | |
136 | * register. | |
137 | */ | |
138 | static inline void axienet_dma_out32(struct axienet_local *lp, | |
139 | off_t reg, u32 value) | |
140 | { | |
141 | out_be32((lp->dma_regs + reg), value); | |
142 | } | |
143 | ||
144 | /** | |
145 | * axienet_dma_bd_release - Release buffer descriptor rings | |
146 | * @ndev: Pointer to the net_device structure | |
147 | * | |
148 | * This function is used to release the descriptors allocated in | |
149 | * axienet_dma_bd_init. axienet_dma_bd_release is called when Axi Ethernet | |
150 | * driver stop api is called. | |
151 | */ | |
152 | static void axienet_dma_bd_release(struct net_device *ndev) | |
153 | { | |
154 | int i; | |
155 | struct axienet_local *lp = netdev_priv(ndev); | |
156 | ||
157 | for (i = 0; i < RX_BD_NUM; i++) { | |
158 | dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys, | |
159 | lp->max_frm_size, DMA_FROM_DEVICE); | |
160 | dev_kfree_skb((struct sk_buff *) | |
161 | (lp->rx_bd_v[i].sw_id_offset)); | |
162 | } | |
163 | ||
164 | if (lp->rx_bd_v) { | |
165 | dma_free_coherent(ndev->dev.parent, | |
166 | sizeof(*lp->rx_bd_v) * RX_BD_NUM, | |
167 | lp->rx_bd_v, | |
168 | lp->rx_bd_p); | |
169 | } | |
170 | if (lp->tx_bd_v) { | |
171 | dma_free_coherent(ndev->dev.parent, | |
172 | sizeof(*lp->tx_bd_v) * TX_BD_NUM, | |
173 | lp->tx_bd_v, | |
174 | lp->tx_bd_p); | |
175 | } | |
176 | } | |
177 | ||
178 | /** | |
179 | * axienet_dma_bd_init - Setup buffer descriptor rings for Axi DMA | |
180 | * @ndev: Pointer to the net_device structure | |
181 | * | |
182 | * returns: 0, on success | |
183 | * -ENOMEM, on failure | |
184 | * | |
185 | * This function is called to initialize the Rx and Tx DMA descriptor | |
186 | * rings. This initializes the descriptors with required default values | |
187 | * and is called when Axi Ethernet driver reset is called. | |
188 | */ | |
189 | static int axienet_dma_bd_init(struct net_device *ndev) | |
190 | { | |
191 | u32 cr; | |
192 | int i; | |
193 | struct sk_buff *skb; | |
194 | struct axienet_local *lp = netdev_priv(ndev); | |
195 | ||
196 | /* Reset the indexes which are used for accessing the BDs */ | |
197 | lp->tx_bd_ci = 0; | |
198 | lp->tx_bd_tail = 0; | |
199 | lp->rx_bd_ci = 0; | |
200 | ||
201 | /* | |
202 | * Allocate the Tx and Rx buffer descriptors. | |
203 | */ | |
204 | lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent, | |
205 | sizeof(*lp->tx_bd_v) * TX_BD_NUM, | |
206 | &lp->tx_bd_p, | |
207 | GFP_KERNEL); | |
208 | if (!lp->tx_bd_v) { | |
209 | dev_err(&ndev->dev, "unable to allocate DMA Tx buffer " | |
210 | "descriptors"); | |
211 | goto out; | |
212 | } | |
213 | ||
214 | lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent, | |
215 | sizeof(*lp->rx_bd_v) * RX_BD_NUM, | |
216 | &lp->rx_bd_p, | |
217 | GFP_KERNEL); | |
218 | if (!lp->rx_bd_v) { | |
219 | dev_err(&ndev->dev, "unable to allocate DMA Rx buffer " | |
220 | "descriptors"); | |
221 | goto out; | |
222 | } | |
223 | ||
224 | memset(lp->tx_bd_v, 0, sizeof(*lp->tx_bd_v) * TX_BD_NUM); | |
225 | for (i = 0; i < TX_BD_NUM; i++) { | |
226 | lp->tx_bd_v[i].next = lp->tx_bd_p + | |
227 | sizeof(*lp->tx_bd_v) * | |
228 | ((i + 1) % TX_BD_NUM); | |
229 | } | |
230 | ||
231 | memset(lp->rx_bd_v, 0, sizeof(*lp->rx_bd_v) * RX_BD_NUM); | |
232 | for (i = 0; i < RX_BD_NUM; i++) { | |
233 | lp->rx_bd_v[i].next = lp->rx_bd_p + | |
234 | sizeof(*lp->rx_bd_v) * | |
235 | ((i + 1) % RX_BD_NUM); | |
236 | ||
237 | skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size); | |
238 | if (!skb) { | |
239 | dev_err(&ndev->dev, "alloc_skb error %d\n", i); | |
240 | goto out; | |
241 | } | |
242 | ||
243 | lp->rx_bd_v[i].sw_id_offset = (u32) skb; | |
244 | lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent, | |
245 | skb->data, | |
246 | lp->max_frm_size, | |
247 | DMA_FROM_DEVICE); | |
248 | lp->rx_bd_v[i].cntrl = lp->max_frm_size; | |
249 | } | |
250 | ||
251 | /* Start updating the Rx channel control register */ | |
252 | cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); | |
253 | /* Update the interrupt coalesce count */ | |
254 | cr = ((cr & ~XAXIDMA_COALESCE_MASK) | | |
255 | ((lp->coalesce_count_rx) << XAXIDMA_COALESCE_SHIFT)); | |
256 | /* Update the delay timer count */ | |
257 | cr = ((cr & ~XAXIDMA_DELAY_MASK) | | |
258 | (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); | |
259 | /* Enable coalesce, delay timer and error interrupts */ | |
260 | cr |= XAXIDMA_IRQ_ALL_MASK; | |
261 | /* Write to the Rx channel control register */ | |
262 | axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); | |
263 | ||
264 | /* Start updating the Tx channel control register */ | |
265 | cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); | |
266 | /* Update the interrupt coalesce count */ | |
267 | cr = (((cr & ~XAXIDMA_COALESCE_MASK)) | | |
268 | ((lp->coalesce_count_tx) << XAXIDMA_COALESCE_SHIFT)); | |
269 | /* Update the delay timer count */ | |
270 | cr = (((cr & ~XAXIDMA_DELAY_MASK)) | | |
271 | (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); | |
272 | /* Enable coalesce, delay timer and error interrupts */ | |
273 | cr |= XAXIDMA_IRQ_ALL_MASK; | |
274 | /* Write to the Tx channel control register */ | |
275 | axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); | |
276 | ||
277 | /* Populate the tail pointer and bring the Rx Axi DMA engine out of | |
278 | * halted state. This will make the Rx side ready for reception.*/ | |
279 | axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p); | |
280 | cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); | |
281 | axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, | |
282 | cr | XAXIDMA_CR_RUNSTOP_MASK); | |
283 | axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p + | |
284 | (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); | |
285 | ||
286 | /* Write to the RS (Run-stop) bit in the Tx channel control register. | |
287 | * Tx channel is now ready to run. But only after we write to the | |
288 | * tail pointer register that the Tx channel will start transmitting */ | |
289 | axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p); | |
290 | cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); | |
291 | axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, | |
292 | cr | XAXIDMA_CR_RUNSTOP_MASK); | |
293 | ||
294 | return 0; | |
295 | out: | |
296 | axienet_dma_bd_release(ndev); | |
297 | return -ENOMEM; | |
298 | } | |
299 | ||
300 | /** | |
301 | * axienet_set_mac_address - Write the MAC address | |
302 | * @ndev: Pointer to the net_device structure | |
303 | * @address: 6 byte Address to be written as MAC address | |
304 | * | |
305 | * This function is called to initialize the MAC address of the Axi Ethernet | |
306 | * core. It writes to the UAW0 and UAW1 registers of the core. | |
307 | */ | |
308 | static void axienet_set_mac_address(struct net_device *ndev, void *address) | |
309 | { | |
310 | struct axienet_local *lp = netdev_priv(ndev); | |
311 | ||
312 | if (address) | |
313 | memcpy(ndev->dev_addr, address, ETH_ALEN); | |
314 | if (!is_valid_ether_addr(ndev->dev_addr)) | |
315 | random_ether_addr(ndev->dev_addr); | |
316 | ||
317 | /* Set up unicast MAC address filter set its mac address */ | |
318 | axienet_iow(lp, XAE_UAW0_OFFSET, | |
319 | (ndev->dev_addr[0]) | | |
320 | (ndev->dev_addr[1] << 8) | | |
321 | (ndev->dev_addr[2] << 16) | | |
322 | (ndev->dev_addr[3] << 24)); | |
323 | axienet_iow(lp, XAE_UAW1_OFFSET, | |
324 | (((axienet_ior(lp, XAE_UAW1_OFFSET)) & | |
325 | ~XAE_UAW1_UNICASTADDR_MASK) | | |
326 | (ndev->dev_addr[4] | | |
327 | (ndev->dev_addr[5] << 8)))); | |
328 | } | |
329 | ||
330 | /** | |
331 | * netdev_set_mac_address - Write the MAC address (from outside the driver) | |
332 | * @ndev: Pointer to the net_device structure | |
333 | * @p: 6 byte Address to be written as MAC address | |
334 | * | |
335 | * returns: 0 for all conditions. Presently, there is no failure case. | |
336 | * | |
337 | * This function is called to initialize the MAC address of the Axi Ethernet | |
338 | * core. It calls the core specific axienet_set_mac_address. This is the | |
339 | * function that goes into net_device_ops structure entry ndo_set_mac_address. | |
340 | */ | |
341 | static int netdev_set_mac_address(struct net_device *ndev, void *p) | |
342 | { | |
343 | struct sockaddr *addr = p; | |
344 | axienet_set_mac_address(ndev, addr->sa_data); | |
345 | return 0; | |
346 | } | |
347 | ||
348 | /** | |
349 | * axienet_set_multicast_list - Prepare the multicast table | |
350 | * @ndev: Pointer to the net_device structure | |
351 | * | |
352 | * This function is called to initialize the multicast table during | |
353 | * initialization. The Axi Ethernet basic multicast support has a four-entry | |
354 | * multicast table which is initialized here. Additionally this function | |
355 | * goes into the net_device_ops structure entry ndo_set_multicast_list. This | |
356 | * means whenever the multicast table entries need to be updated this | |
357 | * function gets called. | |
358 | */ | |
359 | static void axienet_set_multicast_list(struct net_device *ndev) | |
360 | { | |
361 | int i; | |
362 | u32 reg, af0reg, af1reg; | |
363 | struct axienet_local *lp = netdev_priv(ndev); | |
364 | ||
365 | if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) || | |
366 | netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) { | |
367 | /* We must make the kernel realize we had to move into | |
368 | * promiscuous mode. If it was a promiscuous mode request | |
369 | * the flag is already set. If not we set it. */ | |
370 | ndev->flags |= IFF_PROMISC; | |
371 | reg = axienet_ior(lp, XAE_FMI_OFFSET); | |
372 | reg |= XAE_FMI_PM_MASK; | |
373 | axienet_iow(lp, XAE_FMI_OFFSET, reg); | |
374 | dev_info(&ndev->dev, "Promiscuous mode enabled.\n"); | |
375 | } else if (!netdev_mc_empty(ndev)) { | |
376 | struct netdev_hw_addr *ha; | |
377 | ||
378 | i = 0; | |
379 | netdev_for_each_mc_addr(ha, ndev) { | |
380 | if (i >= XAE_MULTICAST_CAM_TABLE_NUM) | |
381 | break; | |
382 | ||
383 | af0reg = (ha->addr[0]); | |
384 | af0reg |= (ha->addr[1] << 8); | |
385 | af0reg |= (ha->addr[2] << 16); | |
386 | af0reg |= (ha->addr[3] << 24); | |
387 | ||
388 | af1reg = (ha->addr[4]); | |
389 | af1reg |= (ha->addr[5] << 8); | |
390 | ||
391 | reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00; | |
392 | reg |= i; | |
393 | ||
394 | axienet_iow(lp, XAE_FMI_OFFSET, reg); | |
395 | axienet_iow(lp, XAE_AF0_OFFSET, af0reg); | |
396 | axienet_iow(lp, XAE_AF1_OFFSET, af1reg); | |
397 | i++; | |
398 | } | |
399 | } else { | |
400 | reg = axienet_ior(lp, XAE_FMI_OFFSET); | |
401 | reg &= ~XAE_FMI_PM_MASK; | |
402 | ||
403 | axienet_iow(lp, XAE_FMI_OFFSET, reg); | |
404 | ||
405 | for (i = 0; i < XAE_MULTICAST_CAM_TABLE_NUM; i++) { | |
406 | reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00; | |
407 | reg |= i; | |
408 | ||
409 | axienet_iow(lp, XAE_FMI_OFFSET, reg); | |
410 | axienet_iow(lp, XAE_AF0_OFFSET, 0); | |
411 | axienet_iow(lp, XAE_AF1_OFFSET, 0); | |
412 | } | |
413 | ||
414 | dev_info(&ndev->dev, "Promiscuous mode disabled.\n"); | |
415 | } | |
416 | } | |
417 | ||
418 | /** | |
419 | * axienet_setoptions - Set an Axi Ethernet option | |
420 | * @ndev: Pointer to the net_device structure | |
421 | * @options: Option to be enabled/disabled | |
422 | * | |
423 | * The Axi Ethernet core has multiple features which can be selectively turned | |
424 | * on or off. The typical options could be jumbo frame option, basic VLAN | |
425 | * option, promiscuous mode option etc. This function is used to set or clear | |
426 | * these options in the Axi Ethernet hardware. This is done through | |
427 | * axienet_option structure . | |
428 | */ | |
429 | static void axienet_setoptions(struct net_device *ndev, u32 options) | |
430 | { | |
431 | int reg; | |
432 | struct axienet_local *lp = netdev_priv(ndev); | |
433 | struct axienet_option *tp = &axienet_options[0]; | |
434 | ||
435 | while (tp->opt) { | |
436 | reg = ((axienet_ior(lp, tp->reg)) & ~(tp->m_or)); | |
437 | if (options & tp->opt) | |
438 | reg |= tp->m_or; | |
439 | axienet_iow(lp, tp->reg, reg); | |
440 | tp++; | |
441 | } | |
442 | ||
443 | lp->options |= options; | |
444 | } | |
445 | ||
446 | static void __axienet_device_reset(struct axienet_local *lp, | |
447 | struct device *dev, off_t offset) | |
448 | { | |
449 | u32 timeout; | |
450 | /* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset | |
451 | * process of Axi DMA takes a while to complete as all pending | |
452 | * commands/transfers will be flushed or completed during this | |
453 | * reset process. */ | |
454 | axienet_dma_out32(lp, offset, XAXIDMA_CR_RESET_MASK); | |
455 | timeout = DELAY_OF_ONE_MILLISEC; | |
456 | while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) { | |
457 | udelay(1); | |
458 | if (--timeout == 0) { | |
459 | dev_err(dev, "axienet_device_reset DMA " | |
460 | "reset timeout!\n"); | |
461 | break; | |
462 | } | |
463 | } | |
464 | } | |
465 | ||
466 | /** | |
467 | * axienet_device_reset - Reset and initialize the Axi Ethernet hardware. | |
468 | * @ndev: Pointer to the net_device structure | |
469 | * | |
470 | * This function is called to reset and initialize the Axi Ethernet core. This | |
471 | * is typically called during initialization. It does a reset of the Axi DMA | |
472 | * Rx/Tx channels and initializes the Axi DMA BDs. Since Axi DMA reset lines | |
473 | * areconnected to Axi Ethernet reset lines, this in turn resets the Axi | |
474 | * Ethernet core. No separate hardware reset is done for the Axi Ethernet | |
475 | * core. | |
476 | */ | |
477 | static void axienet_device_reset(struct net_device *ndev) | |
478 | { | |
479 | u32 axienet_status; | |
480 | struct axienet_local *lp = netdev_priv(ndev); | |
481 | ||
482 | __axienet_device_reset(lp, &ndev->dev, XAXIDMA_TX_CR_OFFSET); | |
483 | __axienet_device_reset(lp, &ndev->dev, XAXIDMA_RX_CR_OFFSET); | |
484 | ||
485 | lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE; | |
486 | lp->options &= (~XAE_OPTION_JUMBO); | |
487 | ||
488 | if ((ndev->mtu > XAE_MTU) && | |
489 | (ndev->mtu <= XAE_JUMBO_MTU) && | |
490 | (lp->jumbo_support)) { | |
491 | lp->max_frm_size = ndev->mtu + XAE_HDR_VLAN_SIZE + | |
492 | XAE_TRL_SIZE; | |
493 | lp->options |= XAE_OPTION_JUMBO; | |
494 | } | |
495 | ||
496 | if (axienet_dma_bd_init(ndev)) { | |
497 | dev_err(&ndev->dev, "axienet_device_reset descriptor " | |
498 | "allocation failed\n"); | |
499 | } | |
500 | ||
501 | axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET); | |
502 | axienet_status &= ~XAE_RCW1_RX_MASK; | |
503 | axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status); | |
504 | ||
505 | axienet_status = axienet_ior(lp, XAE_IP_OFFSET); | |
506 | if (axienet_status & XAE_INT_RXRJECT_MASK) | |
507 | axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK); | |
508 | ||
509 | axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK); | |
510 | ||
511 | /* Sync default options with HW but leave receiver and | |
512 | * transmitter disabled.*/ | |
513 | axienet_setoptions(ndev, lp->options & | |
514 | ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); | |
515 | axienet_set_mac_address(ndev, NULL); | |
516 | axienet_set_multicast_list(ndev); | |
517 | axienet_setoptions(ndev, lp->options); | |
518 | ||
519 | ndev->trans_start = jiffies; | |
520 | } | |
521 | ||
522 | /** | |
523 | * axienet_adjust_link - Adjust the PHY link speed/duplex. | |
524 | * @ndev: Pointer to the net_device structure | |
525 | * | |
526 | * This function is called to change the speed and duplex setting after | |
527 | * auto negotiation is done by the PHY. This is the function that gets | |
528 | * registered with the PHY interface through the "of_phy_connect" call. | |
529 | */ | |
530 | static void axienet_adjust_link(struct net_device *ndev) | |
531 | { | |
532 | u32 emmc_reg; | |
533 | u32 link_state; | |
534 | u32 setspeed = 1; | |
535 | struct axienet_local *lp = netdev_priv(ndev); | |
536 | struct phy_device *phy = lp->phy_dev; | |
537 | ||
538 | link_state = phy->speed | (phy->duplex << 1) | phy->link; | |
539 | if (lp->last_link != link_state) { | |
540 | if ((phy->speed == SPEED_10) || (phy->speed == SPEED_100)) { | |
541 | if (lp->phy_type == XAE_PHY_TYPE_1000BASE_X) | |
542 | setspeed = 0; | |
543 | } else { | |
544 | if ((phy->speed == SPEED_1000) && | |
545 | (lp->phy_type == XAE_PHY_TYPE_MII)) | |
546 | setspeed = 0; | |
547 | } | |
548 | ||
549 | if (setspeed == 1) { | |
550 | emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET); | |
551 | emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK; | |
552 | ||
553 | switch (phy->speed) { | |
554 | case SPEED_1000: | |
555 | emmc_reg |= XAE_EMMC_LINKSPD_1000; | |
556 | break; | |
557 | case SPEED_100: | |
558 | emmc_reg |= XAE_EMMC_LINKSPD_100; | |
559 | break; | |
560 | case SPEED_10: | |
561 | emmc_reg |= XAE_EMMC_LINKSPD_10; | |
562 | break; | |
563 | default: | |
564 | dev_err(&ndev->dev, "Speed other than 10, 100 " | |
565 | "or 1Gbps is not supported\n"); | |
566 | break; | |
567 | } | |
568 | ||
569 | axienet_iow(lp, XAE_EMMC_OFFSET, emmc_reg); | |
570 | lp->last_link = link_state; | |
571 | phy_print_status(phy); | |
572 | } else { | |
573 | dev_err(&ndev->dev, "Error setting Axi Ethernet " | |
574 | "mac speed\n"); | |
575 | } | |
576 | } | |
577 | } | |
578 | ||
579 | /** | |
580 | * axienet_start_xmit_done - Invoked once a transmit is completed by the | |
581 | * Axi DMA Tx channel. | |
582 | * @ndev: Pointer to the net_device structure | |
583 | * | |
584 | * This function is invoked from the Axi DMA Tx isr to notify the completion | |
585 | * of transmit operation. It clears fields in the corresponding Tx BDs and | |
586 | * unmaps the corresponding buffer so that CPU can regain ownership of the | |
587 | * buffer. It finally invokes "netif_wake_queue" to restart transmission if | |
588 | * required. | |
589 | */ | |
590 | static void axienet_start_xmit_done(struct net_device *ndev) | |
591 | { | |
592 | u32 size = 0; | |
593 | u32 packets = 0; | |
594 | struct axienet_local *lp = netdev_priv(ndev); | |
595 | struct axidma_bd *cur_p; | |
596 | unsigned int status = 0; | |
597 | ||
598 | cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; | |
599 | status = cur_p->status; | |
600 | while (status & XAXIDMA_BD_STS_COMPLETE_MASK) { | |
601 | dma_unmap_single(ndev->dev.parent, cur_p->phys, | |
602 | (cur_p->cntrl & XAXIDMA_BD_CTRL_LENGTH_MASK), | |
603 | DMA_TO_DEVICE); | |
604 | if (cur_p->app4) | |
605 | dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); | |
606 | /*cur_p->phys = 0;*/ | |
607 | cur_p->app0 = 0; | |
608 | cur_p->app1 = 0; | |
609 | cur_p->app2 = 0; | |
610 | cur_p->app4 = 0; | |
611 | cur_p->status = 0; | |
612 | ||
613 | size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK; | |
614 | packets++; | |
615 | ||
616 | lp->tx_bd_ci = ++lp->tx_bd_ci % TX_BD_NUM; | |
617 | cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; | |
618 | status = cur_p->status; | |
619 | } | |
620 | ||
621 | ndev->stats.tx_packets += packets; | |
622 | ndev->stats.tx_bytes += size; | |
623 | netif_wake_queue(ndev); | |
624 | } | |
625 | ||
626 | /** | |
627 | * axienet_check_tx_bd_space - Checks if a BD/group of BDs are currently busy | |
628 | * @lp: Pointer to the axienet_local structure | |
629 | * @num_frag: The number of BDs to check for | |
630 | * | |
631 | * returns: 0, on success | |
632 | * NETDEV_TX_BUSY, if any of the descriptors are not free | |
633 | * | |
634 | * This function is invoked before BDs are allocated and transmission starts. | |
635 | * This function returns 0 if a BD or group of BDs can be allocated for | |
636 | * transmission. If the BD or any of the BDs are not free the function | |
637 | * returns a busy status. This is invoked from axienet_start_xmit. | |
638 | */ | |
639 | static inline int axienet_check_tx_bd_space(struct axienet_local *lp, | |
640 | int num_frag) | |
641 | { | |
642 | struct axidma_bd *cur_p; | |
643 | cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % TX_BD_NUM]; | |
644 | if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK) | |
645 | return NETDEV_TX_BUSY; | |
646 | return 0; | |
647 | } | |
648 | ||
649 | /** | |
650 | * axienet_start_xmit - Starts the transmission. | |
651 | * @skb: sk_buff pointer that contains data to be Txed. | |
652 | * @ndev: Pointer to net_device structure. | |
653 | * | |
654 | * returns: NETDEV_TX_OK, on success | |
655 | * NETDEV_TX_BUSY, if any of the descriptors are not free | |
656 | * | |
657 | * This function is invoked from upper layers to initiate transmission. The | |
658 | * function uses the next available free BDs and populates their fields to | |
659 | * start the transmission. Additionally if checksum offloading is supported, | |
660 | * it populates AXI Stream Control fields with appropriate values. | |
661 | */ | |
662 | static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) | |
663 | { | |
664 | u32 ii; | |
665 | u32 num_frag; | |
666 | u32 csum_start_off; | |
667 | u32 csum_index_off; | |
668 | skb_frag_t *frag; | |
669 | dma_addr_t tail_p; | |
670 | struct axienet_local *lp = netdev_priv(ndev); | |
671 | struct axidma_bd *cur_p; | |
672 | ||
673 | num_frag = skb_shinfo(skb)->nr_frags; | |
674 | cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; | |
675 | ||
676 | if (axienet_check_tx_bd_space(lp, num_frag)) { | |
677 | if (!netif_queue_stopped(ndev)) | |
678 | netif_stop_queue(ndev); | |
679 | return NETDEV_TX_BUSY; | |
680 | } | |
681 | ||
682 | if (skb->ip_summed == CHECKSUM_PARTIAL) { | |
683 | if (lp->features & XAE_FEATURE_FULL_TX_CSUM) { | |
684 | /* Tx Full Checksum Offload Enabled */ | |
685 | cur_p->app0 |= 2; | |
686 | } else if (lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) { | |
687 | csum_start_off = skb_transport_offset(skb); | |
688 | csum_index_off = csum_start_off + skb->csum_offset; | |
689 | /* Tx Partial Checksum Offload Enabled */ | |
690 | cur_p->app0 |= 1; | |
691 | cur_p->app1 = (csum_start_off << 16) | csum_index_off; | |
692 | } | |
693 | } else if (skb->ip_summed == CHECKSUM_UNNECESSARY) { | |
694 | cur_p->app0 |= 2; /* Tx Full Checksum Offload Enabled */ | |
695 | } | |
696 | ||
697 | cur_p->cntrl = skb_headlen(skb) | XAXIDMA_BD_CTRL_TXSOF_MASK; | |
698 | cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, | |
699 | skb_headlen(skb), DMA_TO_DEVICE); | |
700 | ||
701 | for (ii = 0; ii < num_frag; ii++) { | |
702 | lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM; | |
703 | cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; | |
704 | frag = &skb_shinfo(skb)->frags[ii]; | |
705 | cur_p->phys = dma_map_single(ndev->dev.parent, | |
706 | skb_frag_address(frag), | |
707 | skb_frag_size(frag), | |
708 | DMA_TO_DEVICE); | |
709 | cur_p->cntrl = skb_frag_size(frag); | |
710 | } | |
711 | ||
712 | cur_p->cntrl |= XAXIDMA_BD_CTRL_TXEOF_MASK; | |
713 | cur_p->app4 = (unsigned long)skb; | |
714 | ||
715 | tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail; | |
716 | /* Start the transfer */ | |
717 | axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p); | |
718 | lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM; | |
719 | ||
720 | return NETDEV_TX_OK; | |
721 | } | |
722 | ||
723 | /** | |
724 | * axienet_recv - Is called from Axi DMA Rx Isr to complete the received | |
725 | * BD processing. | |
726 | * @ndev: Pointer to net_device structure. | |
727 | * | |
728 | * This function is invoked from the Axi DMA Rx isr to process the Rx BDs. It | |
729 | * does minimal processing and invokes "netif_rx" to complete further | |
730 | * processing. | |
731 | */ | |
732 | static void axienet_recv(struct net_device *ndev) | |
733 | { | |
734 | u32 length; | |
735 | u32 csumstatus; | |
736 | u32 size = 0; | |
737 | u32 packets = 0; | |
738 | dma_addr_t tail_p; | |
739 | struct axienet_local *lp = netdev_priv(ndev); | |
740 | struct sk_buff *skb, *new_skb; | |
741 | struct axidma_bd *cur_p; | |
742 | ||
743 | tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci; | |
744 | cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; | |
745 | ||
746 | while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) { | |
747 | skb = (struct sk_buff *) (cur_p->sw_id_offset); | |
748 | length = cur_p->app4 & 0x0000FFFF; | |
749 | ||
750 | dma_unmap_single(ndev->dev.parent, cur_p->phys, | |
751 | lp->max_frm_size, | |
752 | DMA_FROM_DEVICE); | |
753 | ||
754 | skb_put(skb, length); | |
755 | skb->protocol = eth_type_trans(skb, ndev); | |
756 | /*skb_checksum_none_assert(skb);*/ | |
757 | skb->ip_summed = CHECKSUM_NONE; | |
758 | ||
759 | /* if we're doing Rx csum offload, set it up */ | |
760 | if (lp->features & XAE_FEATURE_FULL_RX_CSUM) { | |
761 | csumstatus = (cur_p->app2 & | |
762 | XAE_FULL_CSUM_STATUS_MASK) >> 3; | |
763 | if ((csumstatus == XAE_IP_TCP_CSUM_VALIDATED) || | |
764 | (csumstatus == XAE_IP_UDP_CSUM_VALIDATED)) { | |
765 | skb->ip_summed = CHECKSUM_UNNECESSARY; | |
766 | } | |
767 | } else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 && | |
768 | skb->protocol == __constant_htons(ETH_P_IP) && | |
769 | skb->len > 64) { | |
770 | skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF); | |
771 | skb->ip_summed = CHECKSUM_COMPLETE; | |
772 | } | |
773 | ||
774 | netif_rx(skb); | |
775 | ||
776 | size += length; | |
777 | packets++; | |
778 | ||
779 | new_skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size); | |
780 | if (!new_skb) { | |
781 | dev_err(&ndev->dev, "no memory for new sk_buff\n"); | |
782 | return; | |
783 | } | |
784 | cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data, | |
785 | lp->max_frm_size, | |
786 | DMA_FROM_DEVICE); | |
787 | cur_p->cntrl = lp->max_frm_size; | |
788 | cur_p->status = 0; | |
789 | cur_p->sw_id_offset = (u32) new_skb; | |
790 | ||
791 | lp->rx_bd_ci = ++lp->rx_bd_ci % RX_BD_NUM; | |
792 | cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; | |
793 | } | |
794 | ||
795 | ndev->stats.rx_packets += packets; | |
796 | ndev->stats.rx_bytes += size; | |
797 | ||
798 | axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p); | |
799 | } | |
800 | ||
801 | /** | |
802 | * axienet_tx_irq - Tx Done Isr. | |
803 | * @irq: irq number | |
804 | * @_ndev: net_device pointer | |
805 | * | |
806 | * returns: IRQ_HANDLED for all cases. | |
807 | * | |
808 | * This is the Axi DMA Tx done Isr. It invokes "axienet_start_xmit_done" | |
809 | * to complete the BD processing. | |
810 | */ | |
811 | static irqreturn_t axienet_tx_irq(int irq, void *_ndev) | |
812 | { | |
813 | u32 cr; | |
814 | unsigned int status; | |
815 | struct net_device *ndev = _ndev; | |
816 | struct axienet_local *lp = netdev_priv(ndev); | |
817 | ||
818 | status = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET); | |
819 | if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) { | |
820 | axienet_start_xmit_done(lp->ndev); | |
821 | goto out; | |
822 | } | |
823 | if (!(status & XAXIDMA_IRQ_ALL_MASK)) | |
824 | dev_err(&ndev->dev, "No interrupts asserted in Tx path"); | |
825 | if (status & XAXIDMA_IRQ_ERROR_MASK) { | |
826 | dev_err(&ndev->dev, "DMA Tx error 0x%x\n", status); | |
827 | dev_err(&ndev->dev, "Current BD is at: 0x%x\n", | |
828 | (lp->tx_bd_v[lp->tx_bd_ci]).phys); | |
829 | ||
830 | cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); | |
831 | /* Disable coalesce, delay timer and error interrupts */ | |
832 | cr &= (~XAXIDMA_IRQ_ALL_MASK); | |
833 | /* Write to the Tx channel control register */ | |
834 | axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); | |
835 | ||
836 | cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); | |
837 | /* Disable coalesce, delay timer and error interrupts */ | |
838 | cr &= (~XAXIDMA_IRQ_ALL_MASK); | |
839 | /* Write to the Rx channel control register */ | |
840 | axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); | |
841 | ||
842 | tasklet_schedule(&lp->dma_err_tasklet); | |
843 | } | |
844 | out: | |
845 | axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status); | |
846 | return IRQ_HANDLED; | |
847 | } | |
848 | ||
849 | /** | |
850 | * axienet_rx_irq - Rx Isr. | |
851 | * @irq: irq number | |
852 | * @_ndev: net_device pointer | |
853 | * | |
854 | * returns: IRQ_HANDLED for all cases. | |
855 | * | |
856 | * This is the Axi DMA Rx Isr. It invokes "axienet_recv" to complete the BD | |
857 | * processing. | |
858 | */ | |
859 | static irqreturn_t axienet_rx_irq(int irq, void *_ndev) | |
860 | { | |
861 | u32 cr; | |
862 | unsigned int status; | |
863 | struct net_device *ndev = _ndev; | |
864 | struct axienet_local *lp = netdev_priv(ndev); | |
865 | ||
866 | status = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET); | |
867 | if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) { | |
868 | axienet_recv(lp->ndev); | |
869 | goto out; | |
870 | } | |
871 | if (!(status & XAXIDMA_IRQ_ALL_MASK)) | |
872 | dev_err(&ndev->dev, "No interrupts asserted in Rx path"); | |
873 | if (status & XAXIDMA_IRQ_ERROR_MASK) { | |
874 | dev_err(&ndev->dev, "DMA Rx error 0x%x\n", status); | |
875 | dev_err(&ndev->dev, "Current BD is at: 0x%x\n", | |
876 | (lp->rx_bd_v[lp->rx_bd_ci]).phys); | |
877 | ||
878 | cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); | |
879 | /* Disable coalesce, delay timer and error interrupts */ | |
880 | cr &= (~XAXIDMA_IRQ_ALL_MASK); | |
881 | /* Finally write to the Tx channel control register */ | |
882 | axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); | |
883 | ||
884 | cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); | |
885 | /* Disable coalesce, delay timer and error interrupts */ | |
886 | cr &= (~XAXIDMA_IRQ_ALL_MASK); | |
887 | /* write to the Rx channel control register */ | |
888 | axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); | |
889 | ||
890 | tasklet_schedule(&lp->dma_err_tasklet); | |
891 | } | |
892 | out: | |
893 | axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status); | |
894 | return IRQ_HANDLED; | |
895 | } | |
896 | ||
897 | /** | |
898 | * axienet_open - Driver open routine. | |
899 | * @ndev: Pointer to net_device structure | |
900 | * | |
901 | * returns: 0, on success. | |
902 | * -ENODEV, if PHY cannot be connected to | |
903 | * non-zero error value on failure | |
904 | * | |
905 | * This is the driver open routine. It calls phy_start to start the PHY device. | |
906 | * It also allocates interrupt service routines, enables the interrupt lines | |
907 | * and ISR handling. Axi Ethernet core is reset through Axi DMA core. Buffer | |
908 | * descriptors are initialized. | |
909 | */ | |
910 | static int axienet_open(struct net_device *ndev) | |
911 | { | |
912 | int ret, mdio_mcreg; | |
913 | struct axienet_local *lp = netdev_priv(ndev); | |
914 | ||
915 | dev_dbg(&ndev->dev, "axienet_open()\n"); | |
916 | ||
917 | mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET); | |
918 | ret = axienet_mdio_wait_until_ready(lp); | |
919 | if (ret < 0) | |
920 | return ret; | |
921 | /* Disable the MDIO interface till Axi Ethernet Reset is completed. | |
922 | * When we do an Axi Ethernet reset, it resets the complete core | |
923 | * including the MDIO. If MDIO is not disabled when the reset | |
924 | * process is started, MDIO will be broken afterwards. */ | |
925 | axienet_iow(lp, XAE_MDIO_MC_OFFSET, | |
926 | (mdio_mcreg & (~XAE_MDIO_MC_MDIOEN_MASK))); | |
927 | axienet_device_reset(ndev); | |
928 | /* Enable the MDIO */ | |
929 | axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg); | |
930 | ret = axienet_mdio_wait_until_ready(lp); | |
931 | if (ret < 0) | |
932 | return ret; | |
933 | ||
934 | if (lp->phy_node) { | |
935 | lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, | |
936 | axienet_adjust_link, 0, | |
937 | PHY_INTERFACE_MODE_GMII); | |
938 | if (!lp->phy_dev) { | |
939 | dev_err(lp->dev, "of_phy_connect() failed\n"); | |
940 | return -ENODEV; | |
941 | } | |
942 | phy_start(lp->phy_dev); | |
943 | } | |
944 | ||
945 | /* Enable interrupts for Axi DMA Tx */ | |
946 | ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev); | |
947 | if (ret) | |
948 | goto err_tx_irq; | |
949 | /* Enable interrupts for Axi DMA Rx */ | |
950 | ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev); | |
951 | if (ret) | |
952 | goto err_rx_irq; | |
953 | /* Enable tasklets for Axi DMA error handling */ | |
954 | tasklet_enable(&lp->dma_err_tasklet); | |
955 | return 0; | |
956 | ||
957 | err_rx_irq: | |
958 | free_irq(lp->tx_irq, ndev); | |
959 | err_tx_irq: | |
960 | if (lp->phy_dev) | |
961 | phy_disconnect(lp->phy_dev); | |
962 | lp->phy_dev = NULL; | |
963 | dev_err(lp->dev, "request_irq() failed\n"); | |
964 | return ret; | |
965 | } | |
966 | ||
967 | /** | |
968 | * axienet_stop - Driver stop routine. | |
969 | * @ndev: Pointer to net_device structure | |
970 | * | |
971 | * returns: 0, on success. | |
972 | * | |
973 | * This is the driver stop routine. It calls phy_disconnect to stop the PHY | |
974 | * device. It also removes the interrupt handlers and disables the interrupts. | |
975 | * The Axi DMA Tx/Rx BDs are released. | |
976 | */ | |
977 | static int axienet_stop(struct net_device *ndev) | |
978 | { | |
979 | u32 cr; | |
980 | struct axienet_local *lp = netdev_priv(ndev); | |
981 | ||
982 | dev_dbg(&ndev->dev, "axienet_close()\n"); | |
983 | ||
984 | cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); | |
985 | axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, | |
986 | cr & (~XAXIDMA_CR_RUNSTOP_MASK)); | |
987 | cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); | |
988 | axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, | |
989 | cr & (~XAXIDMA_CR_RUNSTOP_MASK)); | |
990 | axienet_setoptions(ndev, lp->options & | |
991 | ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); | |
992 | ||
993 | tasklet_disable(&lp->dma_err_tasklet); | |
994 | ||
995 | free_irq(lp->tx_irq, ndev); | |
996 | free_irq(lp->rx_irq, ndev); | |
997 | ||
998 | if (lp->phy_dev) | |
999 | phy_disconnect(lp->phy_dev); | |
1000 | lp->phy_dev = NULL; | |
1001 | ||
1002 | axienet_dma_bd_release(ndev); | |
1003 | return 0; | |
1004 | } | |
1005 | ||
1006 | /** | |
1007 | * axienet_change_mtu - Driver change mtu routine. | |
1008 | * @ndev: Pointer to net_device structure | |
1009 | * @new_mtu: New mtu value to be applied | |
1010 | * | |
1011 | * returns: Always returns 0 (success). | |
1012 | * | |
1013 | * This is the change mtu driver routine. It checks if the Axi Ethernet | |
1014 | * hardware supports jumbo frames before changing the mtu. This can be | |
1015 | * called only when the device is not up. | |
1016 | */ | |
1017 | static int axienet_change_mtu(struct net_device *ndev, int new_mtu) | |
1018 | { | |
1019 | struct axienet_local *lp = netdev_priv(ndev); | |
1020 | ||
1021 | if (netif_running(ndev)) | |
1022 | return -EBUSY; | |
1023 | if (lp->jumbo_support) { | |
1024 | if ((new_mtu > XAE_JUMBO_MTU) || (new_mtu < 64)) | |
1025 | return -EINVAL; | |
1026 | ndev->mtu = new_mtu; | |
1027 | } else { | |
1028 | if ((new_mtu > XAE_MTU) || (new_mtu < 64)) | |
1029 | return -EINVAL; | |
1030 | ndev->mtu = new_mtu; | |
1031 | } | |
1032 | ||
1033 | return 0; | |
1034 | } | |
1035 | ||
1036 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
1037 | /** | |
1038 | * axienet_poll_controller - Axi Ethernet poll mechanism. | |
1039 | * @ndev: Pointer to net_device structure | |
1040 | * | |
1041 | * This implements Rx/Tx ISR poll mechanisms. The interrupts are disabled prior | |
1042 | * to polling the ISRs and are enabled back after the polling is done. | |
1043 | */ | |
1044 | static void axienet_poll_controller(struct net_device *ndev) | |
1045 | { | |
1046 | struct axienet_local *lp = netdev_priv(ndev); | |
1047 | disable_irq(lp->tx_irq); | |
1048 | disable_irq(lp->rx_irq); | |
1049 | axienet_rx_irq(lp->tx_irq, ndev); | |
1050 | axienet_tx_irq(lp->rx_irq, ndev); | |
1051 | enable_irq(lp->tx_irq); | |
1052 | enable_irq(lp->rx_irq); | |
1053 | } | |
1054 | #endif | |
1055 | ||
1056 | static const struct net_device_ops axienet_netdev_ops = { | |
1057 | .ndo_open = axienet_open, | |
1058 | .ndo_stop = axienet_stop, | |
1059 | .ndo_start_xmit = axienet_start_xmit, | |
1060 | .ndo_change_mtu = axienet_change_mtu, | |
1061 | .ndo_set_mac_address = netdev_set_mac_address, | |
1062 | .ndo_validate_addr = eth_validate_addr, | |
1063 | .ndo_set_rx_mode = axienet_set_multicast_list, | |
1064 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
1065 | .ndo_poll_controller = axienet_poll_controller, | |
1066 | #endif | |
1067 | }; | |
1068 | ||
1069 | /** | |
1070 | * axienet_ethtools_get_settings - Get Axi Ethernet settings related to PHY. | |
1071 | * @ndev: Pointer to net_device structure | |
1072 | * @ecmd: Pointer to ethtool_cmd structure | |
1073 | * | |
1074 | * This implements ethtool command for getting PHY settings. If PHY could | |
1075 | * not be found, the function returns -ENODEV. This function calls the | |
1076 | * relevant PHY ethtool API to get the PHY settings. | |
1077 | * Issue "ethtool ethX" under linux prompt to execute this function. | |
1078 | */ | |
1079 | static int axienet_ethtools_get_settings(struct net_device *ndev, | |
1080 | struct ethtool_cmd *ecmd) | |
1081 | { | |
1082 | struct axienet_local *lp = netdev_priv(ndev); | |
1083 | struct phy_device *phydev = lp->phy_dev; | |
1084 | if (!phydev) | |
1085 | return -ENODEV; | |
1086 | return phy_ethtool_gset(phydev, ecmd); | |
1087 | } | |
1088 | ||
1089 | /** | |
1090 | * axienet_ethtools_set_settings - Set PHY settings as passed in the argument. | |
1091 | * @ndev: Pointer to net_device structure | |
1092 | * @ecmd: Pointer to ethtool_cmd structure | |
1093 | * | |
1094 | * This implements ethtool command for setting various PHY settings. If PHY | |
1095 | * could not be found, the function returns -ENODEV. This function calls the | |
1096 | * relevant PHY ethtool API to set the PHY. | |
1097 | * Issue e.g. "ethtool -s ethX speed 1000" under linux prompt to execute this | |
1098 | * function. | |
1099 | */ | |
1100 | static int axienet_ethtools_set_settings(struct net_device *ndev, | |
1101 | struct ethtool_cmd *ecmd) | |
1102 | { | |
1103 | struct axienet_local *lp = netdev_priv(ndev); | |
1104 | struct phy_device *phydev = lp->phy_dev; | |
1105 | if (!phydev) | |
1106 | return -ENODEV; | |
1107 | return phy_ethtool_sset(phydev, ecmd); | |
1108 | } | |
1109 | ||
1110 | /** | |
1111 | * axienet_ethtools_get_drvinfo - Get various Axi Ethernet driver information. | |
1112 | * @ndev: Pointer to net_device structure | |
1113 | * @ed: Pointer to ethtool_drvinfo structure | |
1114 | * | |
1115 | * This implements ethtool command for getting the driver information. | |
1116 | * Issue "ethtool -i ethX" under linux prompt to execute this function. | |
1117 | */ | |
1118 | static void axienet_ethtools_get_drvinfo(struct net_device *ndev, | |
1119 | struct ethtool_drvinfo *ed) | |
1120 | { | |
1121 | memset(ed, 0, sizeof(struct ethtool_drvinfo)); | |
1122 | strcpy(ed->driver, DRIVER_NAME); | |
1123 | strcpy(ed->version, DRIVER_VERSION); | |
1124 | ed->regdump_len = sizeof(u32) * AXIENET_REGS_N; | |
1125 | } | |
1126 | ||
1127 | /** | |
1128 | * axienet_ethtools_get_regs_len - Get the total regs length present in the | |
1129 | * AxiEthernet core. | |
1130 | * @ndev: Pointer to net_device structure | |
1131 | * | |
1132 | * This implements ethtool command for getting the total register length | |
1133 | * information. | |
1134 | */ | |
1135 | static int axienet_ethtools_get_regs_len(struct net_device *ndev) | |
1136 | { | |
1137 | return sizeof(u32) * AXIENET_REGS_N; | |
1138 | } | |
1139 | ||
1140 | /** | |
1141 | * axienet_ethtools_get_regs - Dump the contents of all registers present | |
1142 | * in AxiEthernet core. | |
1143 | * @ndev: Pointer to net_device structure | |
1144 | * @regs: Pointer to ethtool_regs structure | |
1145 | * @ret: Void pointer used to return the contents of the registers. | |
1146 | * | |
1147 | * This implements ethtool command for getting the Axi Ethernet register dump. | |
1148 | * Issue "ethtool -d ethX" to execute this function. | |
1149 | */ | |
1150 | static void axienet_ethtools_get_regs(struct net_device *ndev, | |
1151 | struct ethtool_regs *regs, void *ret) | |
1152 | { | |
1153 | u32 *data = (u32 *) ret; | |
1154 | size_t len = sizeof(u32) * AXIENET_REGS_N; | |
1155 | struct axienet_local *lp = netdev_priv(ndev); | |
1156 | ||
1157 | regs->version = 0; | |
1158 | regs->len = len; | |
1159 | ||
1160 | memset(data, 0, len); | |
1161 | data[0] = axienet_ior(lp, XAE_RAF_OFFSET); | |
1162 | data[1] = axienet_ior(lp, XAE_TPF_OFFSET); | |
1163 | data[2] = axienet_ior(lp, XAE_IFGP_OFFSET); | |
1164 | data[3] = axienet_ior(lp, XAE_IS_OFFSET); | |
1165 | data[4] = axienet_ior(lp, XAE_IP_OFFSET); | |
1166 | data[5] = axienet_ior(lp, XAE_IE_OFFSET); | |
1167 | data[6] = axienet_ior(lp, XAE_TTAG_OFFSET); | |
1168 | data[7] = axienet_ior(lp, XAE_RTAG_OFFSET); | |
1169 | data[8] = axienet_ior(lp, XAE_UAWL_OFFSET); | |
1170 | data[9] = axienet_ior(lp, XAE_UAWU_OFFSET); | |
1171 | data[10] = axienet_ior(lp, XAE_TPID0_OFFSET); | |
1172 | data[11] = axienet_ior(lp, XAE_TPID1_OFFSET); | |
1173 | data[12] = axienet_ior(lp, XAE_PPST_OFFSET); | |
1174 | data[13] = axienet_ior(lp, XAE_RCW0_OFFSET); | |
1175 | data[14] = axienet_ior(lp, XAE_RCW1_OFFSET); | |
1176 | data[15] = axienet_ior(lp, XAE_TC_OFFSET); | |
1177 | data[16] = axienet_ior(lp, XAE_FCC_OFFSET); | |
1178 | data[17] = axienet_ior(lp, XAE_EMMC_OFFSET); | |
1179 | data[18] = axienet_ior(lp, XAE_PHYC_OFFSET); | |
1180 | data[19] = axienet_ior(lp, XAE_MDIO_MC_OFFSET); | |
1181 | data[20] = axienet_ior(lp, XAE_MDIO_MCR_OFFSET); | |
1182 | data[21] = axienet_ior(lp, XAE_MDIO_MWD_OFFSET); | |
1183 | data[22] = axienet_ior(lp, XAE_MDIO_MRD_OFFSET); | |
1184 | data[23] = axienet_ior(lp, XAE_MDIO_MIS_OFFSET); | |
1185 | data[24] = axienet_ior(lp, XAE_MDIO_MIP_OFFSET); | |
1186 | data[25] = axienet_ior(lp, XAE_MDIO_MIE_OFFSET); | |
1187 | data[26] = axienet_ior(lp, XAE_MDIO_MIC_OFFSET); | |
1188 | data[27] = axienet_ior(lp, XAE_UAW0_OFFSET); | |
1189 | data[28] = axienet_ior(lp, XAE_UAW1_OFFSET); | |
1190 | data[29] = axienet_ior(lp, XAE_FMI_OFFSET); | |
1191 | data[30] = axienet_ior(lp, XAE_AF0_OFFSET); | |
1192 | data[31] = axienet_ior(lp, XAE_AF1_OFFSET); | |
1193 | } | |
1194 | ||
1195 | /** | |
1196 | * axienet_ethtools_get_pauseparam - Get the pause parameter setting for | |
1197 | * Tx and Rx paths. | |
1198 | * @ndev: Pointer to net_device structure | |
1199 | * @epauseparm: Pointer to ethtool_pauseparam structure. | |
1200 | * | |
1201 | * This implements ethtool command for getting axi ethernet pause frame | |
1202 | * setting. Issue "ethtool -a ethX" to execute this function. | |
1203 | */ | |
1204 | static void | |
1205 | axienet_ethtools_get_pauseparam(struct net_device *ndev, | |
1206 | struct ethtool_pauseparam *epauseparm) | |
1207 | { | |
1208 | u32 regval; | |
1209 | struct axienet_local *lp = netdev_priv(ndev); | |
1210 | epauseparm->autoneg = 0; | |
1211 | regval = axienet_ior(lp, XAE_FCC_OFFSET); | |
1212 | epauseparm->tx_pause = regval & XAE_FCC_FCTX_MASK; | |
1213 | epauseparm->rx_pause = regval & XAE_FCC_FCRX_MASK; | |
1214 | } | |
1215 | ||
1216 | /** | |
1217 | * axienet_ethtools_set_pauseparam - Set device pause parameter(flow control) | |
1218 | * settings. | |
1219 | * @ndev: Pointer to net_device structure | |
1220 | * @epauseparam:Pointer to ethtool_pauseparam structure | |
1221 | * | |
1222 | * This implements ethtool command for enabling flow control on Rx and Tx | |
1223 | * paths. Issue "ethtool -A ethX tx on|off" under linux prompt to execute this | |
1224 | * function. | |
1225 | */ | |
1226 | static int | |
1227 | axienet_ethtools_set_pauseparam(struct net_device *ndev, | |
1228 | struct ethtool_pauseparam *epauseparm) | |
1229 | { | |
1230 | u32 regval = 0; | |
1231 | struct axienet_local *lp = netdev_priv(ndev); | |
1232 | ||
1233 | if (netif_running(ndev)) { | |
1234 | printk(KERN_ERR "%s: Please stop netif before applying " | |
1235 | "configruation\n", ndev->name); | |
1236 | return -EFAULT; | |
1237 | } | |
1238 | ||
1239 | regval = axienet_ior(lp, XAE_FCC_OFFSET); | |
1240 | if (epauseparm->tx_pause) | |
1241 | regval |= XAE_FCC_FCTX_MASK; | |
1242 | else | |
1243 | regval &= ~XAE_FCC_FCTX_MASK; | |
1244 | if (epauseparm->rx_pause) | |
1245 | regval |= XAE_FCC_FCRX_MASK; | |
1246 | else | |
1247 | regval &= ~XAE_FCC_FCRX_MASK; | |
1248 | axienet_iow(lp, XAE_FCC_OFFSET, regval); | |
1249 | ||
1250 | return 0; | |
1251 | } | |
1252 | ||
1253 | /** | |
1254 | * axienet_ethtools_get_coalesce - Get DMA interrupt coalescing count. | |
1255 | * @ndev: Pointer to net_device structure | |
1256 | * @ecoalesce: Pointer to ethtool_coalesce structure | |
1257 | * | |
1258 | * This implements ethtool command for getting the DMA interrupt coalescing | |
1259 | * count on Tx and Rx paths. Issue "ethtool -c ethX" under linux prompt to | |
1260 | * execute this function. | |
1261 | */ | |
1262 | static int axienet_ethtools_get_coalesce(struct net_device *ndev, | |
1263 | struct ethtool_coalesce *ecoalesce) | |
1264 | { | |
1265 | u32 regval = 0; | |
1266 | struct axienet_local *lp = netdev_priv(ndev); | |
1267 | regval = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); | |
1268 | ecoalesce->rx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK) | |
1269 | >> XAXIDMA_COALESCE_SHIFT; | |
1270 | regval = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); | |
1271 | ecoalesce->tx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK) | |
1272 | >> XAXIDMA_COALESCE_SHIFT; | |
1273 | return 0; | |
1274 | } | |
1275 | ||
1276 | /** | |
1277 | * axienet_ethtools_set_coalesce - Set DMA interrupt coalescing count. | |
1278 | * @ndev: Pointer to net_device structure | |
1279 | * @ecoalesce: Pointer to ethtool_coalesce structure | |
1280 | * | |
1281 | * This implements ethtool command for setting the DMA interrupt coalescing | |
1282 | * count on Tx and Rx paths. Issue "ethtool -C ethX rx-frames 5" under linux | |
1283 | * prompt to execute this function. | |
1284 | */ | |
1285 | static int axienet_ethtools_set_coalesce(struct net_device *ndev, | |
1286 | struct ethtool_coalesce *ecoalesce) | |
1287 | { | |
1288 | struct axienet_local *lp = netdev_priv(ndev); | |
1289 | ||
1290 | if (netif_running(ndev)) { | |
1291 | printk(KERN_ERR "%s: Please stop netif before applying " | |
1292 | "configruation\n", ndev->name); | |
1293 | return -EFAULT; | |
1294 | } | |
1295 | ||
1296 | if ((ecoalesce->rx_coalesce_usecs) || | |
1297 | (ecoalesce->rx_coalesce_usecs_irq) || | |
1298 | (ecoalesce->rx_max_coalesced_frames_irq) || | |
1299 | (ecoalesce->tx_coalesce_usecs) || | |
1300 | (ecoalesce->tx_coalesce_usecs_irq) || | |
1301 | (ecoalesce->tx_max_coalesced_frames_irq) || | |
1302 | (ecoalesce->stats_block_coalesce_usecs) || | |
1303 | (ecoalesce->use_adaptive_rx_coalesce) || | |
1304 | (ecoalesce->use_adaptive_tx_coalesce) || | |
1305 | (ecoalesce->pkt_rate_low) || | |
1306 | (ecoalesce->rx_coalesce_usecs_low) || | |
1307 | (ecoalesce->rx_max_coalesced_frames_low) || | |
1308 | (ecoalesce->tx_coalesce_usecs_low) || | |
1309 | (ecoalesce->tx_max_coalesced_frames_low) || | |
1310 | (ecoalesce->pkt_rate_high) || | |
1311 | (ecoalesce->rx_coalesce_usecs_high) || | |
1312 | (ecoalesce->rx_max_coalesced_frames_high) || | |
1313 | (ecoalesce->tx_coalesce_usecs_high) || | |
1314 | (ecoalesce->tx_max_coalesced_frames_high) || | |
1315 | (ecoalesce->rate_sample_interval)) | |
1316 | return -EOPNOTSUPP; | |
1317 | if (ecoalesce->rx_max_coalesced_frames) | |
1318 | lp->coalesce_count_rx = ecoalesce->rx_max_coalesced_frames; | |
1319 | if (ecoalesce->tx_max_coalesced_frames) | |
1320 | lp->coalesce_count_tx = ecoalesce->tx_max_coalesced_frames; | |
1321 | ||
1322 | return 0; | |
1323 | } | |
1324 | ||
1325 | static struct ethtool_ops axienet_ethtool_ops = { | |
1326 | .get_settings = axienet_ethtools_get_settings, | |
1327 | .set_settings = axienet_ethtools_set_settings, | |
1328 | .get_drvinfo = axienet_ethtools_get_drvinfo, | |
1329 | .get_regs_len = axienet_ethtools_get_regs_len, | |
1330 | .get_regs = axienet_ethtools_get_regs, | |
1331 | .get_link = ethtool_op_get_link, | |
1332 | .get_pauseparam = axienet_ethtools_get_pauseparam, | |
1333 | .set_pauseparam = axienet_ethtools_set_pauseparam, | |
1334 | .get_coalesce = axienet_ethtools_get_coalesce, | |
1335 | .set_coalesce = axienet_ethtools_set_coalesce, | |
1336 | }; | |
1337 | ||
1338 | /** | |
1339 | * axienet_dma_err_handler - Tasklet handler for Axi DMA Error | |
1340 | * @data: Data passed | |
1341 | * | |
1342 | * Resets the Axi DMA and Axi Ethernet devices, and reconfigures the | |
1343 | * Tx/Rx BDs. | |
1344 | */ | |
1345 | static void axienet_dma_err_handler(unsigned long data) | |
1346 | { | |
1347 | u32 axienet_status; | |
1348 | u32 cr, i; | |
1349 | int mdio_mcreg; | |
1350 | struct axienet_local *lp = (struct axienet_local *) data; | |
1351 | struct net_device *ndev = lp->ndev; | |
1352 | struct axidma_bd *cur_p; | |
1353 | ||
1354 | axienet_setoptions(ndev, lp->options & | |
1355 | ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); | |
1356 | mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET); | |
1357 | axienet_mdio_wait_until_ready(lp); | |
1358 | /* Disable the MDIO interface till Axi Ethernet Reset is completed. | |
1359 | * When we do an Axi Ethernet reset, it resets the complete core | |
1360 | * including the MDIO. So if MDIO is not disabled when the reset | |
1361 | * process is started, MDIO will be broken afterwards. */ | |
1362 | axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg & | |
1363 | ~XAE_MDIO_MC_MDIOEN_MASK)); | |
1364 | ||
1365 | __axienet_device_reset(lp, &ndev->dev, XAXIDMA_TX_CR_OFFSET); | |
1366 | __axienet_device_reset(lp, &ndev->dev, XAXIDMA_RX_CR_OFFSET); | |
1367 | ||
1368 | axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg); | |
1369 | axienet_mdio_wait_until_ready(lp); | |
1370 | ||
1371 | for (i = 0; i < TX_BD_NUM; i++) { | |
1372 | cur_p = &lp->tx_bd_v[i]; | |
1373 | if (cur_p->phys) | |
1374 | dma_unmap_single(ndev->dev.parent, cur_p->phys, | |
1375 | (cur_p->cntrl & | |
1376 | XAXIDMA_BD_CTRL_LENGTH_MASK), | |
1377 | DMA_TO_DEVICE); | |
1378 | if (cur_p->app4) | |
1379 | dev_kfree_skb_irq((struct sk_buff *) cur_p->app4); | |
1380 | cur_p->phys = 0; | |
1381 | cur_p->cntrl = 0; | |
1382 | cur_p->status = 0; | |
1383 | cur_p->app0 = 0; | |
1384 | cur_p->app1 = 0; | |
1385 | cur_p->app2 = 0; | |
1386 | cur_p->app3 = 0; | |
1387 | cur_p->app4 = 0; | |
1388 | cur_p->sw_id_offset = 0; | |
1389 | } | |
1390 | ||
1391 | for (i = 0; i < RX_BD_NUM; i++) { | |
1392 | cur_p = &lp->rx_bd_v[i]; | |
1393 | cur_p->status = 0; | |
1394 | cur_p->app0 = 0; | |
1395 | cur_p->app1 = 0; | |
1396 | cur_p->app2 = 0; | |
1397 | cur_p->app3 = 0; | |
1398 | cur_p->app4 = 0; | |
1399 | } | |
1400 | ||
1401 | lp->tx_bd_ci = 0; | |
1402 | lp->tx_bd_tail = 0; | |
1403 | lp->rx_bd_ci = 0; | |
1404 | ||
1405 | /* Start updating the Rx channel control register */ | |
1406 | cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); | |
1407 | /* Update the interrupt coalesce count */ | |
1408 | cr = ((cr & ~XAXIDMA_COALESCE_MASK) | | |
1409 | (XAXIDMA_DFT_RX_THRESHOLD << XAXIDMA_COALESCE_SHIFT)); | |
1410 | /* Update the delay timer count */ | |
1411 | cr = ((cr & ~XAXIDMA_DELAY_MASK) | | |
1412 | (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); | |
1413 | /* Enable coalesce, delay timer and error interrupts */ | |
1414 | cr |= XAXIDMA_IRQ_ALL_MASK; | |
1415 | /* Finally write to the Rx channel control register */ | |
1416 | axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); | |
1417 | ||
1418 | /* Start updating the Tx channel control register */ | |
1419 | cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); | |
1420 | /* Update the interrupt coalesce count */ | |
1421 | cr = (((cr & ~XAXIDMA_COALESCE_MASK)) | | |
1422 | (XAXIDMA_DFT_TX_THRESHOLD << XAXIDMA_COALESCE_SHIFT)); | |
1423 | /* Update the delay timer count */ | |
1424 | cr = (((cr & ~XAXIDMA_DELAY_MASK)) | | |
1425 | (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); | |
1426 | /* Enable coalesce, delay timer and error interrupts */ | |
1427 | cr |= XAXIDMA_IRQ_ALL_MASK; | |
1428 | /* Finally write to the Tx channel control register */ | |
1429 | axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); | |
1430 | ||
1431 | /* Populate the tail pointer and bring the Rx Axi DMA engine out of | |
1432 | * halted state. This will make the Rx side ready for reception.*/ | |
1433 | axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p); | |
1434 | cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); | |
1435 | axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, | |
1436 | cr | XAXIDMA_CR_RUNSTOP_MASK); | |
1437 | axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p + | |
1438 | (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); | |
1439 | ||
1440 | /* Write to the RS (Run-stop) bit in the Tx channel control register. | |
1441 | * Tx channel is now ready to run. But only after we write to the | |
1442 | * tail pointer register that the Tx channel will start transmitting */ | |
1443 | axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p); | |
1444 | cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); | |
1445 | axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, | |
1446 | cr | XAXIDMA_CR_RUNSTOP_MASK); | |
1447 | ||
1448 | axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET); | |
1449 | axienet_status &= ~XAE_RCW1_RX_MASK; | |
1450 | axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status); | |
1451 | ||
1452 | axienet_status = axienet_ior(lp, XAE_IP_OFFSET); | |
1453 | if (axienet_status & XAE_INT_RXRJECT_MASK) | |
1454 | axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK); | |
1455 | axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK); | |
1456 | ||
1457 | /* Sync default options with HW but leave receiver and | |
1458 | * transmitter disabled.*/ | |
1459 | axienet_setoptions(ndev, lp->options & | |
1460 | ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); | |
1461 | axienet_set_mac_address(ndev, NULL); | |
1462 | axienet_set_multicast_list(ndev); | |
1463 | axienet_setoptions(ndev, lp->options); | |
1464 | } | |
1465 | ||
1466 | /** | |
1467 | * axienet_of_probe - Axi Ethernet probe function. | |
1468 | * @op: Pointer to platform device structure. | |
1469 | * @match: Pointer to device id structure | |
1470 | * | |
1471 | * returns: 0, on success | |
1472 | * Non-zero error value on failure. | |
1473 | * | |
1474 | * This is the probe routine for Axi Ethernet driver. This is called before | |
1475 | * any other driver routines are invoked. It allocates and sets up the Ethernet | |
1476 | * device. Parses through device tree and populates fields of | |
1477 | * axienet_local. It registers the Ethernet device. | |
1478 | */ | |
1479 | static int __devinit axienet_of_probe(struct platform_device *op) | |
1480 | { | |
1481 | __be32 *p; | |
1482 | int size, ret = 0; | |
1483 | struct device_node *np; | |
1484 | struct axienet_local *lp; | |
1485 | struct net_device *ndev; | |
1486 | const void *addr; | |
1487 | ||
1488 | ndev = alloc_etherdev(sizeof(*lp)); | |
41de8d4c | 1489 | if (!ndev) |
8a3b7a25 | 1490 | return -ENOMEM; |
8a3b7a25 DB |
1491 | |
1492 | ether_setup(ndev); | |
1493 | dev_set_drvdata(&op->dev, ndev); | |
1494 | ||
1495 | SET_NETDEV_DEV(ndev, &op->dev); | |
1496 | ndev->flags &= ~IFF_MULTICAST; /* clear multicast */ | |
1497 | ndev->features = NETIF_F_SG | NETIF_F_FRAGLIST; | |
1498 | ndev->netdev_ops = &axienet_netdev_ops; | |
1499 | ndev->ethtool_ops = &axienet_ethtool_ops; | |
1500 | ||
1501 | lp = netdev_priv(ndev); | |
1502 | lp->ndev = ndev; | |
1503 | lp->dev = &op->dev; | |
1504 | lp->options = XAE_OPTION_DEFAULTS; | |
1505 | /* Map device registers */ | |
1506 | lp->regs = of_iomap(op->dev.of_node, 0); | |
1507 | if (!lp->regs) { | |
1508 | dev_err(&op->dev, "could not map Axi Ethernet regs.\n"); | |
1509 | goto nodev; | |
1510 | } | |
1511 | /* Setup checksum offload, but default to off if not specified */ | |
1512 | lp->features = 0; | |
1513 | ||
1514 | p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,txcsum", NULL); | |
1515 | if (p) { | |
1516 | switch (be32_to_cpup(p)) { | |
1517 | case 1: | |
1518 | lp->csum_offload_on_tx_path = | |
1519 | XAE_FEATURE_PARTIAL_TX_CSUM; | |
1520 | lp->features |= XAE_FEATURE_PARTIAL_TX_CSUM; | |
1521 | /* Can checksum TCP/UDP over IPv4. */ | |
1522 | ndev->features |= NETIF_F_IP_CSUM; | |
1523 | break; | |
1524 | case 2: | |
1525 | lp->csum_offload_on_tx_path = | |
1526 | XAE_FEATURE_FULL_TX_CSUM; | |
1527 | lp->features |= XAE_FEATURE_FULL_TX_CSUM; | |
1528 | /* Can checksum TCP/UDP over IPv4. */ | |
1529 | ndev->features |= NETIF_F_IP_CSUM; | |
1530 | break; | |
1531 | default: | |
1532 | lp->csum_offload_on_tx_path = XAE_NO_CSUM_OFFLOAD; | |
1533 | } | |
1534 | } | |
1535 | p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL); | |
1536 | if (p) { | |
1537 | switch (be32_to_cpup(p)) { | |
1538 | case 1: | |
1539 | lp->csum_offload_on_rx_path = | |
1540 | XAE_FEATURE_PARTIAL_RX_CSUM; | |
1541 | lp->features |= XAE_FEATURE_PARTIAL_RX_CSUM; | |
1542 | break; | |
1543 | case 2: | |
1544 | lp->csum_offload_on_rx_path = | |
1545 | XAE_FEATURE_FULL_RX_CSUM; | |
1546 | lp->features |= XAE_FEATURE_FULL_RX_CSUM; | |
1547 | break; | |
1548 | default: | |
1549 | lp->csum_offload_on_rx_path = XAE_NO_CSUM_OFFLOAD; | |
1550 | } | |
1551 | } | |
1552 | /* For supporting jumbo frames, the Axi Ethernet hardware must have | |
1553 | * a larger Rx/Tx Memory. Typically, the size must be more than or | |
1554 | * equal to 16384 bytes, so that we can enable jumbo option and start | |
1555 | * supporting jumbo frames. Here we check for memory allocated for | |
1556 | * Rx/Tx in the hardware from the device-tree and accordingly set | |
1557 | * flags. */ | |
1558 | p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxmem", NULL); | |
1559 | if (p) { | |
1560 | if ((be32_to_cpup(p)) >= 0x4000) | |
1561 | lp->jumbo_support = 1; | |
1562 | } | |
1563 | p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type", | |
1564 | NULL); | |
1565 | if (p) | |
1566 | lp->temac_type = be32_to_cpup(p); | |
1567 | p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,phy-type", NULL); | |
1568 | if (p) | |
1569 | lp->phy_type = be32_to_cpup(p); | |
1570 | ||
1571 | /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */ | |
1572 | np = of_parse_phandle(op->dev.of_node, "axistream-connected", 0); | |
1573 | if (!np) { | |
1574 | dev_err(&op->dev, "could not find DMA node\n"); | |
1575 | goto err_iounmap; | |
1576 | } | |
1577 | lp->dma_regs = of_iomap(np, 0); | |
1578 | if (lp->dma_regs) { | |
1579 | dev_dbg(&op->dev, "MEM base: %p\n", lp->dma_regs); | |
1580 | } else { | |
1581 | dev_err(&op->dev, "unable to map DMA registers\n"); | |
1582 | of_node_put(np); | |
1583 | } | |
1584 | lp->rx_irq = irq_of_parse_and_map(np, 1); | |
1585 | lp->tx_irq = irq_of_parse_and_map(np, 0); | |
1586 | of_node_put(np); | |
1587 | if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) { | |
1588 | dev_err(&op->dev, "could not determine irqs\n"); | |
1589 | ret = -ENOMEM; | |
1590 | goto err_iounmap_2; | |
1591 | } | |
1592 | ||
1593 | /* Retrieve the MAC address */ | |
1594 | addr = of_get_property(op->dev.of_node, "local-mac-address", &size); | |
1595 | if ((!addr) || (size != 6)) { | |
1596 | dev_err(&op->dev, "could not find MAC address\n"); | |
1597 | ret = -ENODEV; | |
1598 | goto err_iounmap_2; | |
1599 | } | |
1600 | axienet_set_mac_address(ndev, (void *) addr); | |
1601 | ||
1602 | lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD; | |
1603 | lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD; | |
1604 | ||
1605 | lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0); | |
1606 | ret = axienet_mdio_setup(lp, op->dev.of_node); | |
1607 | if (ret) | |
1608 | dev_warn(&op->dev, "error registering MDIO bus\n"); | |
1609 | ||
1610 | ret = register_netdev(lp->ndev); | |
1611 | if (ret) { | |
1612 | dev_err(lp->dev, "register_netdev() error (%i)\n", ret); | |
1613 | goto err_iounmap_2; | |
1614 | } | |
1615 | ||
1616 | tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, | |
1617 | (unsigned long) lp); | |
1618 | tasklet_disable(&lp->dma_err_tasklet); | |
1619 | ||
1620 | return 0; | |
1621 | ||
1622 | err_iounmap_2: | |
1623 | if (lp->dma_regs) | |
1624 | iounmap(lp->dma_regs); | |
1625 | err_iounmap: | |
1626 | iounmap(lp->regs); | |
1627 | nodev: | |
1628 | free_netdev(ndev); | |
1629 | ndev = NULL; | |
1630 | return ret; | |
1631 | } | |
1632 | ||
1633 | static int __devexit axienet_of_remove(struct platform_device *op) | |
1634 | { | |
1635 | struct net_device *ndev = dev_get_drvdata(&op->dev); | |
1636 | struct axienet_local *lp = netdev_priv(ndev); | |
1637 | ||
1638 | axienet_mdio_teardown(lp); | |
1639 | unregister_netdev(ndev); | |
1640 | ||
1641 | if (lp->phy_node) | |
1642 | of_node_put(lp->phy_node); | |
1643 | lp->phy_node = NULL; | |
1644 | ||
1645 | dev_set_drvdata(&op->dev, NULL); | |
1646 | ||
1647 | iounmap(lp->regs); | |
1648 | if (lp->dma_regs) | |
1649 | iounmap(lp->dma_regs); | |
1650 | free_netdev(ndev); | |
1651 | ||
1652 | return 0; | |
1653 | } | |
1654 | ||
1655 | static struct platform_driver axienet_of_driver = { | |
1656 | .probe = axienet_of_probe, | |
1657 | .remove = __devexit_p(axienet_of_remove), | |
1658 | .driver = { | |
1659 | .owner = THIS_MODULE, | |
1660 | .name = "xilinx_axienet", | |
1661 | .of_match_table = axienet_of_match, | |
1662 | }, | |
1663 | }; | |
1664 | ||
1665 | static int __init axienet_init(void) | |
1666 | { | |
1667 | return platform_driver_register(&axienet_of_driver); | |
1668 | } | |
1669 | ||
1670 | static void __exit axienet_exit(void) | |
1671 | { | |
1672 | platform_driver_unregister(&axienet_of_driver); | |
1673 | } | |
1674 | ||
1675 | module_init(axienet_init); | |
1676 | module_exit(axienet_exit); | |
1677 | ||
1678 | MODULE_DESCRIPTION("Xilinx Axi Ethernet driver"); | |
1679 | MODULE_AUTHOR("Xilinx"); | |
1680 | MODULE_LICENSE("GPL"); |