]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*====================================================================== |
2 | ||
3 | A PCMCIA ethernet driver for NS8390-based cards | |
4 | ||
5 | This driver supports the D-Link DE-650 and Linksys EthernetCard | |
6 | cards, the newer D-Link and Linksys combo cards, Accton EN2212 | |
7 | cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory | |
8 | mode, and the IBM Credit Card Adapter, the NE4100, the Thomas | |
9 | Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory | |
10 | mode. It will also handle the Socket EA card in either mode. | |
11 | ||
12 | Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net | |
13 | ||
14 | pcnet_cs.c 1.153 2003/11/09 18:53:09 | |
15 | ||
16 | The network driver code is based on Donald Becker's NE2000 code: | |
17 | ||
18 | Written 1992,1993 by Donald Becker. | |
19 | Copyright 1993 United States Government as represented by the | |
20 | Director, National Security Agency. This software may be used and | |
21 | distributed according to the terms of the GNU General Public License, | |
22 | incorporated herein by reference. | |
23 | Donald Becker may be reached at becker@scyld.com | |
24 | ||
25 | Based also on Keith Moore's changes to Don Becker's code, for IBM | |
26 | CCAE support. Drivers merged back together, and shared-memory | |
27 | Socket EA support added, by Ken Raeburn, September 1995. | |
28 | ||
29 | ======================================================================*/ | |
30 | ||
31 | #include <linux/kernel.h> | |
32 | #include <linux/module.h> | |
33 | #include <linux/init.h> | |
34 | #include <linux/ptrace.h> | |
35 | #include <linux/slab.h> | |
36 | #include <linux/string.h> | |
37 | #include <linux/timer.h> | |
38 | #include <linux/delay.h> | |
39 | #include <linux/ethtool.h> | |
40 | #include <linux/netdevice.h> | |
41 | #include <../drivers/net/8390.h> | |
42 | ||
1da177e4 LT |
43 | #include <pcmcia/cs_types.h> |
44 | #include <pcmcia/cs.h> | |
45 | #include <pcmcia/cistpl.h> | |
46 | #include <pcmcia/ciscode.h> | |
47 | #include <pcmcia/ds.h> | |
48 | #include <pcmcia/cisreg.h> | |
49 | ||
50 | #include <asm/io.h> | |
51 | #include <asm/system.h> | |
52 | #include <asm/byteorder.h> | |
53 | #include <asm/uaccess.h> | |
54 | ||
55 | #define PCNET_CMD 0x00 | |
56 | #define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */ | |
57 | #define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */ | |
58 | #define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */ | |
59 | ||
60 | #define PCNET_START_PG 0x40 /* First page of TX buffer */ | |
61 | #define PCNET_STOP_PG 0x80 /* Last page +1 of RX ring */ | |
62 | ||
63 | /* Socket EA cards have a larger packet buffer */ | |
64 | #define SOCKET_START_PG 0x01 | |
65 | #define SOCKET_STOP_PG 0xff | |
66 | ||
67 | #define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */ | |
68 | ||
f71e1309 | 69 | static const char *if_names[] = { "auto", "10baseT", "10base2"}; |
1da177e4 LT |
70 | |
71 | #ifdef PCMCIA_DEBUG | |
72 | static int pc_debug = PCMCIA_DEBUG; | |
73 | module_param(pc_debug, int, 0); | |
74 | #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) | |
75 | static char *version = | |
76 | "pcnet_cs.c 1.153 2003/11/09 18:53:09 (David Hinds)"; | |
77 | #else | |
78 | #define DEBUG(n, args...) | |
79 | #endif | |
80 | ||
81 | /*====================================================================*/ | |
82 | ||
83 | /* Module parameters */ | |
84 | ||
85 | MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); | |
86 | MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver"); | |
87 | MODULE_LICENSE("GPL"); | |
88 | ||
89 | #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) | |
90 | ||
91 | INT_MODULE_PARM(if_port, 1); /* Transceiver type */ | |
92 | INT_MODULE_PARM(use_big_buf, 1); /* use 64K packet buffer? */ | |
93 | INT_MODULE_PARM(mem_speed, 0); /* shared mem speed, in ns */ | |
94 | INT_MODULE_PARM(delay_output, 0); /* pause after xmit? */ | |
95 | INT_MODULE_PARM(delay_time, 4); /* in usec */ | |
96 | INT_MODULE_PARM(use_shmem, -1); /* use shared memory? */ | |
97 | INT_MODULE_PARM(full_duplex, 0); /* full duplex? */ | |
98 | ||
99 | /* Ugh! Let the user hardwire the hardware address for queer cards */ | |
100 | static int hw_addr[6] = { 0, /* ... */ }; | |
101 | module_param_array(hw_addr, int, NULL, 0); | |
102 | ||
103 | /*====================================================================*/ | |
104 | ||
105 | static void mii_phy_probe(struct net_device *dev); | |
15b99ac1 | 106 | static int pcnet_config(struct pcmcia_device *link); |
fba395ee | 107 | static void pcnet_release(struct pcmcia_device *link); |
1da177e4 LT |
108 | static int pcnet_open(struct net_device *dev); |
109 | static int pcnet_close(struct net_device *dev); | |
110 | static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | |
111 | static struct ethtool_ops netdev_ethtool_ops; | |
112 | static irqreturn_t ei_irq_wrapper(int irq, void *dev_id, struct pt_regs *regs); | |
113 | static void ei_watchdog(u_long arg); | |
114 | static void pcnet_reset_8390(struct net_device *dev); | |
115 | static int set_config(struct net_device *dev, struct ifmap *map); | |
fba395ee | 116 | static int setup_shmem_window(struct pcmcia_device *link, int start_pg, |
1da177e4 | 117 | int stop_pg, int cm_offset); |
fba395ee | 118 | static int setup_dma_config(struct pcmcia_device *link, int start_pg, |
1da177e4 LT |
119 | int stop_pg); |
120 | ||
cc3b4866 | 121 | static void pcnet_detach(struct pcmcia_device *p_dev); |
1da177e4 LT |
122 | |
123 | static dev_info_t dev_info = "pcnet_cs"; | |
1da177e4 LT |
124 | |
125 | /*====================================================================*/ | |
126 | ||
127 | typedef struct hw_info_t { | |
128 | u_int offset; | |
129 | u_char a0, a1, a2; | |
130 | u_int flags; | |
131 | } hw_info_t; | |
132 | ||
133 | #define DELAY_OUTPUT 0x01 | |
134 | #define HAS_MISC_REG 0x02 | |
135 | #define USE_BIG_BUF 0x04 | |
136 | #define HAS_IBM_MISC 0x08 | |
137 | #define IS_DL10019 0x10 | |
138 | #define IS_DL10022 0x20 | |
139 | #define HAS_MII 0x40 | |
140 | #define USE_SHMEM 0x80 /* autodetected */ | |
141 | ||
142 | #define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */ | |
143 | #define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */ | |
144 | #define MII_PHYID_REV_MASK 0xfffffff0 | |
145 | #define MII_PHYID_REG1 0x02 | |
146 | #define MII_PHYID_REG2 0x03 | |
147 | ||
148 | static hw_info_t hw_info[] = { | |
149 | { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT }, | |
150 | { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 }, | |
151 | { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 }, | |
152 | { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94, | |
153 | DELAY_OUTPUT | HAS_IBM_MISC }, | |
154 | { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 }, | |
155 | { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 }, | |
156 | { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 }, | |
157 | { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 }, | |
158 | { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 }, | |
159 | { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 }, | |
160 | { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48, | |
161 | HAS_MISC_REG | HAS_IBM_MISC }, | |
162 | { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 }, | |
163 | { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 }, | |
164 | { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a, | |
165 | HAS_MISC_REG | HAS_IBM_MISC }, | |
166 | { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac, | |
167 | HAS_MISC_REG | HAS_IBM_MISC }, | |
168 | { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29, | |
169 | HAS_MISC_REG | HAS_IBM_MISC }, | |
170 | { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a, | |
171 | HAS_MISC_REG | HAS_IBM_MISC }, | |
172 | { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac, | |
173 | HAS_MISC_REG | HAS_IBM_MISC }, | |
174 | { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87, | |
175 | HAS_MISC_REG | HAS_IBM_MISC }, | |
176 | { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17, | |
177 | HAS_MISC_REG | HAS_IBM_MISC }, | |
178 | { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8, | |
179 | HAS_MISC_REG | HAS_IBM_MISC }, | |
180 | { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0, | |
181 | HAS_MISC_REG | HAS_IBM_MISC }, | |
182 | { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0, | |
183 | HAS_MISC_REG | HAS_IBM_MISC }, | |
184 | { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 }, | |
185 | { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 }, | |
186 | { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0, | |
187 | HAS_MISC_REG | HAS_IBM_MISC }, | |
188 | { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f, | |
189 | HAS_MISC_REG | HAS_IBM_MISC }, | |
190 | { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 }, | |
191 | { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 }, | |
192 | { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 }, | |
193 | { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 }, | |
194 | { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65, | |
195 | HAS_MISC_REG | HAS_IBM_MISC }, | |
196 | { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45, | |
197 | HAS_MISC_REG | HAS_IBM_MISC }, | |
198 | { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 }, | |
199 | { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 }, | |
200 | { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 }, | |
201 | { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b, | |
202 | DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF }, | |
203 | { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 }, | |
204 | { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 }, | |
205 | { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 }, | |
206 | { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 }, | |
207 | { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 } | |
208 | }; | |
209 | ||
210 | #define NR_INFO (sizeof(hw_info)/sizeof(hw_info_t)) | |
211 | ||
212 | static hw_info_t default_info = { 0, 0, 0, 0, 0 }; | |
213 | static hw_info_t dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII }; | |
214 | static hw_info_t dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII }; | |
215 | ||
216 | typedef struct pcnet_dev_t { | |
fd238232 | 217 | struct pcmcia_device *p_dev; |
1da177e4 LT |
218 | dev_node_t node; |
219 | u_int flags; | |
220 | void __iomem *base; | |
221 | struct timer_list watchdog; | |
222 | int stale, fast_poll; | |
223 | u_char phy_id; | |
224 | u_char eth_phy, pna_phy; | |
225 | u_short link_status; | |
226 | u_long mii_reset; | |
227 | } pcnet_dev_t; | |
228 | ||
229 | static inline pcnet_dev_t *PRIV(struct net_device *dev) | |
230 | { | |
231 | char *p = netdev_priv(dev); | |
232 | return (pcnet_dev_t *)(p + sizeof(struct ei_device)); | |
233 | } | |
234 | ||
235 | /*====================================================================== | |
236 | ||
237 | pcnet_attach() creates an "instance" of the driver, allocating | |
238 | local data structures for one device. The device is registered | |
239 | with Card Services. | |
240 | ||
241 | ======================================================================*/ | |
242 | ||
fba395ee | 243 | static int pcnet_probe(struct pcmcia_device *link) |
1da177e4 LT |
244 | { |
245 | pcnet_dev_t *info; | |
1da177e4 | 246 | struct net_device *dev; |
1da177e4 LT |
247 | |
248 | DEBUG(0, "pcnet_attach()\n"); | |
249 | ||
250 | /* Create new ethernet device */ | |
251 | dev = __alloc_ei_netdev(sizeof(pcnet_dev_t)); | |
f8cfa618 | 252 | if (!dev) return -ENOMEM; |
1da177e4 | 253 | info = PRIV(dev); |
fba395ee | 254 | info->p_dev = link; |
1da177e4 LT |
255 | link->priv = dev; |
256 | ||
257 | link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; | |
258 | link->irq.IRQInfo1 = IRQ_LEVEL_ID; | |
259 | link->conf.Attributes = CONF_ENABLE_IRQ; | |
260 | link->conf.IntType = INT_MEMORY_AND_IO; | |
261 | ||
262 | SET_MODULE_OWNER(dev); | |
263 | dev->open = &pcnet_open; | |
264 | dev->stop = &pcnet_close; | |
265 | dev->set_config = &set_config; | |
266 | ||
15b99ac1 | 267 | return pcnet_config(link); |
1da177e4 LT |
268 | } /* pcnet_attach */ |
269 | ||
270 | /*====================================================================== | |
271 | ||
272 | This deletes a driver "instance". The device is de-registered | |
273 | with Card Services. If it has been released, all local data | |
274 | structures are freed. Otherwise, the structures will be freed | |
275 | when the device is released. | |
276 | ||
277 | ======================================================================*/ | |
278 | ||
fba395ee | 279 | static void pcnet_detach(struct pcmcia_device *link) |
1da177e4 | 280 | { |
cc3b4866 | 281 | struct net_device *dev = link->priv; |
1da177e4 | 282 | |
cc3b4866 | 283 | DEBUG(0, "pcnet_detach(0x%p)\n", link); |
1da177e4 | 284 | |
fd238232 | 285 | if (link->dev_node) |
cc3b4866 | 286 | unregister_netdev(dev); |
1da177e4 | 287 | |
e2d40963 | 288 | pcnet_release(link); |
1da177e4 | 289 | |
cc3b4866 | 290 | free_netdev(dev); |
1da177e4 LT |
291 | } /* pcnet_detach */ |
292 | ||
293 | /*====================================================================== | |
294 | ||
295 | This probes for a card's hardware address, for card types that | |
296 | encode this information in their CIS. | |
297 | ||
298 | ======================================================================*/ | |
299 | ||
fba395ee | 300 | static hw_info_t *get_hwinfo(struct pcmcia_device *link) |
1da177e4 LT |
301 | { |
302 | struct net_device *dev = link->priv; | |
303 | win_req_t req; | |
304 | memreq_t mem; | |
305 | u_char __iomem *base, *virt; | |
306 | int i, j; | |
307 | ||
308 | /* Allocate a small memory window */ | |
309 | req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; | |
310 | req.Base = 0; req.Size = 0; | |
311 | req.AccessSpeed = 0; | |
fba395ee | 312 | i = pcmcia_request_window(&link, &req, &link->win); |
1da177e4 | 313 | if (i != CS_SUCCESS) { |
fba395ee | 314 | cs_error(link, RequestWindow, i); |
1da177e4 LT |
315 | return NULL; |
316 | } | |
317 | ||
318 | virt = ioremap(req.Base, req.Size); | |
319 | mem.Page = 0; | |
320 | for (i = 0; i < NR_INFO; i++) { | |
321 | mem.CardOffset = hw_info[i].offset & ~(req.Size-1); | |
322 | pcmcia_map_mem_page(link->win, &mem); | |
323 | base = &virt[hw_info[i].offset & (req.Size-1)]; | |
324 | if ((readb(base+0) == hw_info[i].a0) && | |
325 | (readb(base+2) == hw_info[i].a1) && | |
326 | (readb(base+4) == hw_info[i].a2)) | |
327 | break; | |
328 | } | |
329 | if (i < NR_INFO) { | |
330 | for (j = 0; j < 6; j++) | |
331 | dev->dev_addr[j] = readb(base + (j<<1)); | |
332 | } | |
333 | ||
334 | iounmap(virt); | |
335 | j = pcmcia_release_window(link->win); | |
336 | if (j != CS_SUCCESS) | |
fba395ee | 337 | cs_error(link, ReleaseWindow, j); |
1da177e4 LT |
338 | return (i < NR_INFO) ? hw_info+i : NULL; |
339 | } /* get_hwinfo */ | |
340 | ||
341 | /*====================================================================== | |
342 | ||
343 | This probes for a card's hardware address by reading the PROM. | |
344 | It checks the address against a list of known types, then falls | |
345 | back to a simple NE2000 clone signature check. | |
346 | ||
347 | ======================================================================*/ | |
348 | ||
fba395ee | 349 | static hw_info_t *get_prom(struct pcmcia_device *link) |
1da177e4 LT |
350 | { |
351 | struct net_device *dev = link->priv; | |
352 | kio_addr_t ioaddr = dev->base_addr; | |
353 | u_char prom[32]; | |
354 | int i, j; | |
355 | ||
356 | /* This is lifted straight from drivers/net/ne.c */ | |
357 | struct { | |
358 | u_char value, offset; | |
359 | } program_seq[] = { | |
360 | {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ | |
361 | {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */ | |
362 | {0x00, EN0_RCNTLO}, /* Clear the count regs. */ | |
363 | {0x00, EN0_RCNTHI}, | |
364 | {0x00, EN0_IMR}, /* Mask completion irq. */ | |
365 | {0xFF, EN0_ISR}, | |
366 | {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ | |
367 | {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ | |
368 | {32, EN0_RCNTLO}, | |
369 | {0x00, EN0_RCNTHI}, | |
370 | {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ | |
371 | {0x00, EN0_RSARHI}, | |
372 | {E8390_RREAD+E8390_START, E8390_CMD}, | |
373 | }; | |
374 | ||
375 | pcnet_reset_8390(dev); | |
376 | mdelay(10); | |
377 | ||
378 | for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++) | |
379 | outb_p(program_seq[i].value, ioaddr + program_seq[i].offset); | |
380 | ||
381 | for (i = 0; i < 32; i++) | |
382 | prom[i] = inb(ioaddr + PCNET_DATAPORT); | |
383 | for (i = 0; i < NR_INFO; i++) { | |
384 | if ((prom[0] == hw_info[i].a0) && | |
385 | (prom[2] == hw_info[i].a1) && | |
386 | (prom[4] == hw_info[i].a2)) | |
387 | break; | |
388 | } | |
389 | if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) { | |
390 | for (j = 0; j < 6; j++) | |
391 | dev->dev_addr[j] = prom[j<<1]; | |
392 | return (i < NR_INFO) ? hw_info+i : &default_info; | |
393 | } | |
394 | return NULL; | |
395 | } /* get_prom */ | |
396 | ||
397 | /*====================================================================== | |
398 | ||
399 | For DL10019 based cards, like the Linksys EtherFast | |
400 | ||
401 | ======================================================================*/ | |
402 | ||
fba395ee | 403 | static hw_info_t *get_dl10019(struct pcmcia_device *link) |
1da177e4 LT |
404 | { |
405 | struct net_device *dev = link->priv; | |
406 | int i; | |
407 | u_char sum; | |
408 | ||
409 | for (sum = 0, i = 0x14; i < 0x1c; i++) | |
410 | sum += inb_p(dev->base_addr + i); | |
411 | if (sum != 0xff) | |
412 | return NULL; | |
413 | for (i = 0; i < 6; i++) | |
414 | dev->dev_addr[i] = inb_p(dev->base_addr + 0x14 + i); | |
415 | i = inb(dev->base_addr + 0x1f); | |
416 | return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info; | |
417 | } | |
418 | ||
419 | /*====================================================================== | |
420 | ||
421 | For Asix AX88190 based cards | |
422 | ||
423 | ======================================================================*/ | |
424 | ||
fba395ee | 425 | static hw_info_t *get_ax88190(struct pcmcia_device *link) |
1da177e4 LT |
426 | { |
427 | struct net_device *dev = link->priv; | |
428 | kio_addr_t ioaddr = dev->base_addr; | |
429 | int i, j; | |
430 | ||
431 | /* Not much of a test, but the alternatives are messy */ | |
432 | if (link->conf.ConfigBase != 0x03c0) | |
433 | return NULL; | |
434 | ||
435 | outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ | |
436 | outb_p(0x00, ioaddr + EN0_RSARLO); /* DMA starting at 0x0400. */ | |
437 | outb_p(0x04, ioaddr + EN0_RSARHI); | |
438 | outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD); | |
439 | ||
440 | for (i = 0; i < 6; i += 2) { | |
441 | j = inw(ioaddr + PCNET_DATAPORT); | |
442 | dev->dev_addr[i] = j & 0xff; | |
443 | dev->dev_addr[i+1] = j >> 8; | |
444 | } | |
445 | printk(KERN_NOTICE "pcnet_cs: this is an AX88190 card!\n"); | |
446 | printk(KERN_NOTICE "pcnet_cs: use axnet_cs instead.\n"); | |
447 | return NULL; | |
448 | } | |
449 | ||
450 | /*====================================================================== | |
451 | ||
452 | This should be totally unnecessary... but when we can't figure | |
453 | out the hardware address any other way, we'll let the user hard | |
454 | wire it when the module is initialized. | |
455 | ||
456 | ======================================================================*/ | |
457 | ||
fba395ee | 458 | static hw_info_t *get_hwired(struct pcmcia_device *link) |
1da177e4 LT |
459 | { |
460 | struct net_device *dev = link->priv; | |
461 | int i; | |
462 | ||
463 | for (i = 0; i < 6; i++) | |
464 | if (hw_addr[i] != 0) break; | |
465 | if (i == 6) | |
466 | return NULL; | |
467 | ||
468 | for (i = 0; i < 6; i++) | |
469 | dev->dev_addr[i] = hw_addr[i]; | |
470 | ||
471 | return &default_info; | |
472 | } /* get_hwired */ | |
473 | ||
474 | /*====================================================================== | |
475 | ||
476 | pcnet_config() is scheduled to run after a CARD_INSERTION event | |
477 | is received, to configure the PCMCIA socket, and to make the | |
478 | ethernet device available to the system. | |
479 | ||
480 | ======================================================================*/ | |
481 | ||
482 | #define CS_CHECK(fn, ret) \ | |
483 | do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) | |
484 | ||
fba395ee | 485 | static int try_io_port(struct pcmcia_device *link) |
1da177e4 LT |
486 | { |
487 | int j, ret; | |
488 | if (link->io.NumPorts1 == 32) { | |
489 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; | |
490 | if (link->io.NumPorts2 > 0) { | |
491 | /* for master/slave multifunction cards */ | |
492 | link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; | |
493 | link->irq.Attributes = | |
494 | IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED; | |
495 | } | |
496 | } else { | |
497 | /* This should be two 16-port windows */ | |
498 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | |
499 | link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; | |
500 | } | |
501 | if (link->io.BasePort1 == 0) { | |
502 | link->io.IOAddrLines = 16; | |
503 | for (j = 0; j < 0x400; j += 0x20) { | |
504 | link->io.BasePort1 = j ^ 0x300; | |
505 | link->io.BasePort2 = (j ^ 0x300) + 0x10; | |
fba395ee | 506 | ret = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
507 | if (ret == CS_SUCCESS) return ret; |
508 | } | |
509 | return ret; | |
510 | } else { | |
fba395ee | 511 | return pcmcia_request_io(link, &link->io); |
1da177e4 LT |
512 | } |
513 | } | |
514 | ||
15b99ac1 | 515 | static int pcnet_config(struct pcmcia_device *link) |
1da177e4 | 516 | { |
1da177e4 LT |
517 | struct net_device *dev = link->priv; |
518 | pcnet_dev_t *info = PRIV(dev); | |
519 | tuple_t tuple; | |
520 | cisparse_t parse; | |
521 | int i, last_ret, last_fn, start_pg, stop_pg, cm_offset; | |
522 | int manfid = 0, prodid = 0, has_shmem = 0; | |
523 | u_short buf[64]; | |
1da177e4 LT |
524 | hw_info_t *hw_info; |
525 | ||
526 | DEBUG(0, "pcnet_config(0x%p)\n", link); | |
527 | ||
528 | tuple.Attributes = 0; | |
529 | tuple.TupleData = (cisdata_t *)buf; | |
530 | tuple.TupleDataMax = sizeof(buf); | |
531 | tuple.TupleOffset = 0; | |
532 | tuple.DesiredTuple = CISTPL_CONFIG; | |
fba395ee DB |
533 | CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); |
534 | CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); | |
535 | CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); | |
1da177e4 LT |
536 | link->conf.ConfigBase = parse.config.base; |
537 | link->conf.Present = parse.config.rmask[0]; | |
538 | ||
1da177e4 LT |
539 | tuple.DesiredTuple = CISTPL_MANFID; |
540 | tuple.Attributes = TUPLE_RETURN_COMMON; | |
fba395ee DB |
541 | if ((pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) && |
542 | (pcmcia_get_tuple_data(link, &tuple) == CS_SUCCESS)) { | |
1da177e4 LT |
543 | manfid = le16_to_cpu(buf[0]); |
544 | prodid = le16_to_cpu(buf[1]); | |
545 | } | |
546 | ||
547 | tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
548 | tuple.Attributes = 0; | |
fba395ee | 549 | CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); |
1da177e4 LT |
550 | while (last_ret == CS_SUCCESS) { |
551 | cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); | |
552 | cistpl_io_t *io = &(parse.cftable_entry.io); | |
553 | ||
fba395ee DB |
554 | if (pcmcia_get_tuple_data(link, &tuple) != 0 || |
555 | pcmcia_parse_tuple(link, &tuple, &parse) != 0 || | |
1da177e4 LT |
556 | cfg->index == 0 || cfg->io.nwin == 0) |
557 | goto next_entry; | |
558 | ||
559 | link->conf.ConfigIndex = cfg->index; | |
560 | /* For multifunction cards, by convention, we configure the | |
561 | network function with window 0, and serial with window 1 */ | |
562 | if (io->nwin > 1) { | |
563 | i = (io->win[1].len > io->win[0].len); | |
564 | link->io.BasePort2 = io->win[1-i].base; | |
565 | link->io.NumPorts2 = io->win[1-i].len; | |
566 | } else { | |
567 | i = link->io.NumPorts2 = 0; | |
568 | } | |
569 | has_shmem = ((cfg->mem.nwin == 1) && | |
570 | (cfg->mem.win[0].len >= 0x4000)); | |
571 | link->io.BasePort1 = io->win[i].base; | |
572 | link->io.NumPorts1 = io->win[i].len; | |
573 | link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; | |
574 | if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) { | |
575 | last_ret = try_io_port(link); | |
576 | if (last_ret == CS_SUCCESS) break; | |
577 | } | |
578 | next_entry: | |
fba395ee | 579 | last_ret = pcmcia_get_next_tuple(link, &tuple); |
1da177e4 LT |
580 | } |
581 | if (last_ret != CS_SUCCESS) { | |
fba395ee | 582 | cs_error(link, RequestIO, last_ret); |
1da177e4 LT |
583 | goto failed; |
584 | } | |
585 | ||
fba395ee | 586 | CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); |
1da177e4 LT |
587 | |
588 | if (link->io.NumPorts2 == 8) { | |
589 | link->conf.Attributes |= CONF_ENABLE_SPKR; | |
590 | link->conf.Status = CCSR_AUDIO_ENA; | |
591 | } | |
592 | if ((manfid == MANFID_IBM) && | |
593 | (prodid == PRODID_IBM_HOME_AND_AWAY)) | |
594 | link->conf.ConfigIndex |= 0x10; | |
595 | ||
fba395ee | 596 | CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); |
1da177e4 LT |
597 | dev->irq = link->irq.AssignedIRQ; |
598 | dev->base_addr = link->io.BasePort1; | |
599 | if (info->flags & HAS_MISC_REG) { | |
600 | if ((if_port == 1) || (if_port == 2)) | |
601 | dev->if_port = if_port; | |
602 | else | |
603 | printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n"); | |
604 | } else { | |
605 | dev->if_port = 0; | |
606 | } | |
607 | ||
608 | hw_info = get_hwinfo(link); | |
609 | if (hw_info == NULL) | |
610 | hw_info = get_prom(link); | |
611 | if (hw_info == NULL) | |
612 | hw_info = get_dl10019(link); | |
613 | if (hw_info == NULL) | |
614 | hw_info = get_ax88190(link); | |
615 | if (hw_info == NULL) | |
616 | hw_info = get_hwired(link); | |
617 | ||
618 | if (hw_info == NULL) { | |
619 | printk(KERN_NOTICE "pcnet_cs: unable to read hardware net" | |
620 | " address for io base %#3lx\n", dev->base_addr); | |
621 | goto failed; | |
622 | } | |
623 | ||
624 | info->flags = hw_info->flags; | |
625 | /* Check for user overrides */ | |
626 | info->flags |= (delay_output) ? DELAY_OUTPUT : 0; | |
627 | if ((manfid == MANFID_SOCKET) && | |
628 | ((prodid == PRODID_SOCKET_LPE) || | |
629 | (prodid == PRODID_SOCKET_LPE_CF) || | |
630 | (prodid == PRODID_SOCKET_EIO))) | |
631 | info->flags &= ~USE_BIG_BUF; | |
632 | if (!use_big_buf) | |
633 | info->flags &= ~USE_BIG_BUF; | |
634 | ||
635 | if (info->flags & USE_BIG_BUF) { | |
636 | start_pg = SOCKET_START_PG; | |
637 | stop_pg = SOCKET_STOP_PG; | |
638 | cm_offset = 0x10000; | |
639 | } else { | |
640 | start_pg = PCNET_START_PG; | |
641 | stop_pg = PCNET_STOP_PG; | |
642 | cm_offset = 0; | |
643 | } | |
644 | ||
645 | /* has_shmem is ignored if use_shmem != -1 */ | |
646 | if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) || | |
647 | (setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0)) | |
648 | setup_dma_config(link, start_pg, stop_pg); | |
649 | ||
650 | ei_status.name = "NE2000"; | |
651 | ei_status.word16 = 1; | |
652 | ei_status.reset_8390 = &pcnet_reset_8390; | |
653 | ||
654 | SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); | |
655 | ||
656 | if (info->flags & (IS_DL10019|IS_DL10022)) { | |
657 | u_char id = inb(dev->base_addr + 0x1a); | |
658 | dev->do_ioctl = &ei_ioctl; | |
659 | mii_phy_probe(dev); | |
660 | if ((id == 0x30) && !info->pna_phy && (info->eth_phy == 4)) | |
661 | info->eth_phy = 0; | |
662 | } | |
663 | ||
fd238232 | 664 | link->dev_node = &info->node; |
fba395ee | 665 | SET_NETDEV_DEV(dev, &handle_to_dev(link)); |
1da177e4 LT |
666 | |
667 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
668 | dev->poll_controller = ei_poll; | |
669 | #endif | |
670 | ||
671 | if (register_netdev(dev) != 0) { | |
672 | printk(KERN_NOTICE "pcnet_cs: register_netdev() failed\n"); | |
fd238232 | 673 | link->dev_node = NULL; |
1da177e4 LT |
674 | goto failed; |
675 | } | |
676 | ||
677 | strcpy(info->node.dev_name, dev->name); | |
678 | ||
679 | if (info->flags & (IS_DL10019|IS_DL10022)) { | |
680 | u_char id = inb(dev->base_addr + 0x1a); | |
681 | printk(KERN_INFO "%s: NE2000 (DL100%d rev %02x): ", | |
682 | dev->name, ((info->flags & IS_DL10022) ? 22 : 19), id); | |
683 | if (info->pna_phy) | |
684 | printk("PNA, "); | |
685 | } else { | |
686 | printk(KERN_INFO "%s: NE2000 Compatible: ", dev->name); | |
687 | } | |
688 | printk("io %#3lx, irq %d,", dev->base_addr, dev->irq); | |
689 | if (info->flags & USE_SHMEM) | |
690 | printk (" mem %#5lx,", dev->mem_start); | |
691 | if (info->flags & HAS_MISC_REG) | |
692 | printk(" %s xcvr,", if_names[dev->if_port]); | |
693 | printk(" hw_addr "); | |
694 | for (i = 0; i < 6; i++) | |
695 | printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n")); | |
15b99ac1 | 696 | return 0; |
1da177e4 LT |
697 | |
698 | cs_failed: | |
fba395ee | 699 | cs_error(link, last_fn, last_ret); |
1da177e4 LT |
700 | failed: |
701 | pcnet_release(link); | |
15b99ac1 | 702 | return -ENODEV; |
1da177e4 LT |
703 | } /* pcnet_config */ |
704 | ||
705 | /*====================================================================== | |
706 | ||
707 | After a card is removed, pcnet_release() will unregister the net | |
708 | device, and release the PCMCIA configuration. If the device is | |
709 | still open, this will be postponed until it is closed. | |
710 | ||
711 | ======================================================================*/ | |
712 | ||
fba395ee | 713 | static void pcnet_release(struct pcmcia_device *link) |
1da177e4 | 714 | { |
5f2a71fc | 715 | pcnet_dev_t *info = PRIV(link->priv); |
1da177e4 | 716 | |
5f2a71fc | 717 | DEBUG(0, "pcnet_release(0x%p)\n", link); |
1da177e4 | 718 | |
5f2a71fc DB |
719 | if (info->flags & USE_SHMEM) |
720 | iounmap(info->base); | |
1da177e4 | 721 | |
fba395ee | 722 | pcmcia_disable_device(link); |
1da177e4 LT |
723 | } |
724 | ||
725 | /*====================================================================== | |
726 | ||
727 | The card status event handler. Mostly, this schedules other | |
728 | stuff to run after an event is received. A CARD_REMOVAL event | |
729 | also sets some flags to discourage the net drivers from trying | |
730 | to talk to the card any more. | |
731 | ||
732 | ======================================================================*/ | |
733 | ||
fba395ee | 734 | static int pcnet_suspend(struct pcmcia_device *link) |
98e4c28b | 735 | { |
98e4c28b DB |
736 | struct net_device *dev = link->priv; |
737 | ||
e2d40963 | 738 | if (link->open) |
8661bb5b | 739 | netif_device_detach(dev); |
98e4c28b DB |
740 | |
741 | return 0; | |
742 | } | |
743 | ||
fba395ee | 744 | static int pcnet_resume(struct pcmcia_device *link) |
98e4c28b | 745 | { |
98e4c28b DB |
746 | struct net_device *dev = link->priv; |
747 | ||
e2d40963 | 748 | if (link->open) { |
8661bb5b DB |
749 | pcnet_reset_8390(dev); |
750 | NS8390_init(dev, 1); | |
751 | netif_device_attach(dev); | |
98e4c28b DB |
752 | } |
753 | ||
754 | return 0; | |
755 | } | |
756 | ||
1da177e4 LT |
757 | |
758 | /*====================================================================== | |
759 | ||
760 | MII interface support for DL10019 and DL10022 based cards | |
761 | ||
762 | On the DL10019, the MII IO direction bit is 0x10; on the DL10022 | |
763 | it is 0x20. Setting both bits seems to work on both card types. | |
764 | ||
765 | ======================================================================*/ | |
766 | ||
767 | #define DLINK_GPIO 0x1c | |
768 | #define DLINK_DIAG 0x1d | |
769 | #define DLINK_EEPROM 0x1e | |
770 | ||
771 | #define MDIO_SHIFT_CLK 0x80 | |
772 | #define MDIO_DATA_OUT 0x40 | |
773 | #define MDIO_DIR_WRITE 0x30 | |
774 | #define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE) | |
775 | #define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT) | |
776 | #define MDIO_DATA_READ 0x10 | |
777 | #define MDIO_MASK 0x0f | |
778 | ||
779 | static void mdio_sync(kio_addr_t addr) | |
780 | { | |
781 | int bits, mask = inb(addr) & MDIO_MASK; | |
782 | for (bits = 0; bits < 32; bits++) { | |
783 | outb(mask | MDIO_DATA_WRITE1, addr); | |
784 | outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr); | |
785 | } | |
786 | } | |
787 | ||
788 | static int mdio_read(kio_addr_t addr, int phy_id, int loc) | |
789 | { | |
790 | u_int cmd = (0x06<<10)|(phy_id<<5)|loc; | |
791 | int i, retval = 0, mask = inb(addr) & MDIO_MASK; | |
792 | ||
793 | mdio_sync(addr); | |
794 | for (i = 13; i >= 0; i--) { | |
795 | int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; | |
796 | outb(mask | dat, addr); | |
797 | outb(mask | dat | MDIO_SHIFT_CLK, addr); | |
798 | } | |
799 | for (i = 19; i > 0; i--) { | |
800 | outb(mask, addr); | |
801 | retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0); | |
802 | outb(mask | MDIO_SHIFT_CLK, addr); | |
803 | } | |
804 | return (retval>>1) & 0xffff; | |
805 | } | |
806 | ||
807 | static void mdio_write(kio_addr_t addr, int phy_id, int loc, int value) | |
808 | { | |
809 | u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value; | |
810 | int i, mask = inb(addr) & MDIO_MASK; | |
811 | ||
812 | mdio_sync(addr); | |
813 | for (i = 31; i >= 0; i--) { | |
814 | int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; | |
815 | outb(mask | dat, addr); | |
816 | outb(mask | dat | MDIO_SHIFT_CLK, addr); | |
817 | } | |
818 | for (i = 1; i >= 0; i--) { | |
819 | outb(mask, addr); | |
820 | outb(mask | MDIO_SHIFT_CLK, addr); | |
821 | } | |
822 | } | |
823 | ||
824 | static void mdio_reset(kio_addr_t addr, int phy_id) | |
825 | { | |
826 | outb_p(0x08, addr); | |
827 | outb_p(0x0c, addr); | |
828 | outb_p(0x08, addr); | |
829 | outb_p(0x0c, addr); | |
830 | outb_p(0x00, addr); | |
831 | } | |
832 | ||
833 | /*====================================================================== | |
834 | ||
835 | EEPROM access routines for DL10019 and DL10022 based cards | |
836 | ||
837 | ======================================================================*/ | |
838 | ||
839 | #define EE_EEP 0x40 | |
840 | #define EE_ASIC 0x10 | |
841 | #define EE_CS 0x08 | |
842 | #define EE_CK 0x04 | |
843 | #define EE_DO 0x02 | |
844 | #define EE_DI 0x01 | |
845 | #define EE_ADOT 0x01 /* DataOut for ASIC */ | |
846 | #define EE_READ_CMD 0x06 | |
847 | ||
848 | #define DL19FDUPLX 0x0400 /* DL10019 Full duplex mode */ | |
849 | ||
850 | static int read_eeprom(kio_addr_t ioaddr, int location) | |
851 | { | |
852 | int i, retval = 0; | |
853 | kio_addr_t ee_addr = ioaddr + DLINK_EEPROM; | |
854 | int read_cmd = location | (EE_READ_CMD << 8); | |
855 | ||
856 | outb(0, ee_addr); | |
857 | outb(EE_EEP|EE_CS, ee_addr); | |
858 | ||
859 | /* Shift the read command bits out. */ | |
860 | for (i = 10; i >= 0; i--) { | |
861 | short dataval = (read_cmd & (1 << i)) ? EE_DO : 0; | |
862 | outb_p(EE_EEP|EE_CS|dataval, ee_addr); | |
863 | outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr); | |
864 | } | |
865 | outb(EE_EEP|EE_CS, ee_addr); | |
866 | ||
867 | for (i = 16; i > 0; i--) { | |
868 | outb_p(EE_EEP|EE_CS | EE_CK, ee_addr); | |
869 | retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0); | |
870 | outb_p(EE_EEP|EE_CS, ee_addr); | |
871 | } | |
872 | ||
873 | /* Terminate the EEPROM access. */ | |
874 | outb(0, ee_addr); | |
875 | return retval; | |
876 | } | |
877 | ||
878 | /* | |
879 | The internal ASIC registers can be changed by EEPROM READ access | |
880 | with EE_ASIC bit set. | |
881 | In ASIC mode, EE_ADOT is used to output the data to the ASIC. | |
882 | */ | |
883 | ||
884 | static void write_asic(kio_addr_t ioaddr, int location, short asic_data) | |
885 | { | |
886 | int i; | |
887 | kio_addr_t ee_addr = ioaddr + DLINK_EEPROM; | |
888 | short dataval; | |
889 | int read_cmd = location | (EE_READ_CMD << 8); | |
890 | ||
891 | asic_data |= read_eeprom(ioaddr, location); | |
892 | ||
893 | outb(0, ee_addr); | |
894 | outb(EE_ASIC|EE_CS|EE_DI, ee_addr); | |
895 | ||
896 | read_cmd = read_cmd >> 1; | |
897 | ||
898 | /* Shift the read command bits out. */ | |
899 | for (i = 9; i >= 0; i--) { | |
900 | dataval = (read_cmd & (1 << i)) ? EE_DO : 0; | |
901 | outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); | |
902 | outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr); | |
903 | outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); | |
904 | } | |
905 | // sync | |
906 | outb(EE_ASIC|EE_CS, ee_addr); | |
907 | outb(EE_ASIC|EE_CS|EE_CK, ee_addr); | |
908 | outb(EE_ASIC|EE_CS, ee_addr); | |
909 | ||
910 | for (i = 15; i >= 0; i--) { | |
911 | dataval = (asic_data & (1 << i)) ? EE_ADOT : 0; | |
912 | outb_p(EE_ASIC|EE_CS|dataval, ee_addr); | |
913 | outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr); | |
914 | outb_p(EE_ASIC|EE_CS|dataval, ee_addr); | |
915 | } | |
916 | ||
917 | /* Terminate the ASIC access. */ | |
918 | outb(EE_ASIC|EE_DI, ee_addr); | |
919 | outb(EE_ASIC|EE_DI| EE_CK, ee_addr); | |
920 | outb(EE_ASIC|EE_DI, ee_addr); | |
921 | ||
922 | outb(0, ee_addr); | |
923 | } | |
924 | ||
925 | /*====================================================================*/ | |
926 | ||
927 | static void set_misc_reg(struct net_device *dev) | |
928 | { | |
929 | kio_addr_t nic_base = dev->base_addr; | |
930 | pcnet_dev_t *info = PRIV(dev); | |
931 | u_char tmp; | |
932 | ||
933 | if (info->flags & HAS_MISC_REG) { | |
934 | tmp = inb_p(nic_base + PCNET_MISC) & ~3; | |
935 | if (dev->if_port == 2) | |
936 | tmp |= 1; | |
937 | if (info->flags & USE_BIG_BUF) | |
938 | tmp |= 2; | |
939 | if (info->flags & HAS_IBM_MISC) | |
940 | tmp |= 8; | |
941 | outb_p(tmp, nic_base + PCNET_MISC); | |
942 | } | |
943 | if (info->flags & IS_DL10022) { | |
944 | if (info->flags & HAS_MII) { | |
945 | mdio_reset(nic_base + DLINK_GPIO, info->eth_phy); | |
946 | /* Restart MII autonegotiation */ | |
947 | mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); | |
948 | mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); | |
949 | info->mii_reset = jiffies; | |
950 | } else { | |
951 | outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG); | |
952 | } | |
d89a64be K |
953 | } else if (info->flags & IS_DL10019) { |
954 | /* Advertise 100F, 100H, 10F, 10H */ | |
955 | mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); | |
956 | /* Restart MII autonegotiation */ | |
957 | mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); | |
958 | mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); | |
1da177e4 LT |
959 | } |
960 | } | |
961 | ||
962 | /*====================================================================*/ | |
963 | ||
964 | static void mii_phy_probe(struct net_device *dev) | |
965 | { | |
966 | pcnet_dev_t *info = PRIV(dev); | |
967 | kio_addr_t mii_addr = dev->base_addr + DLINK_GPIO; | |
968 | int i; | |
969 | u_int tmp, phyid; | |
970 | ||
971 | for (i = 31; i >= 0; i--) { | |
972 | tmp = mdio_read(mii_addr, i, 1); | |
973 | if ((tmp == 0) || (tmp == 0xffff)) | |
974 | continue; | |
975 | tmp = mdio_read(mii_addr, i, MII_PHYID_REG1); | |
976 | phyid = tmp << 16; | |
977 | phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2); | |
978 | phyid &= MII_PHYID_REV_MASK; | |
979 | DEBUG(0, "%s: MII at %d is 0x%08x\n", dev->name, i, phyid); | |
980 | if (phyid == AM79C9XX_HOME_PHY) { | |
981 | info->pna_phy = i; | |
982 | } else if (phyid != AM79C9XX_ETH_PHY) { | |
983 | info->eth_phy = i; | |
984 | } | |
985 | } | |
986 | } | |
987 | ||
988 | static int pcnet_open(struct net_device *dev) | |
989 | { | |
990 | pcnet_dev_t *info = PRIV(dev); | |
fba395ee | 991 | struct pcmcia_device *link = info->p_dev; |
fd238232 | 992 | |
1da177e4 LT |
993 | DEBUG(2, "pcnet_open('%s')\n", dev->name); |
994 | ||
995 | if (!DEV_OK(link)) | |
996 | return -ENODEV; | |
997 | ||
998 | link->open++; | |
999 | ||
1000 | set_misc_reg(dev); | |
1001 | request_irq(dev->irq, ei_irq_wrapper, SA_SHIRQ, dev_info, dev); | |
1002 | ||
1003 | info->phy_id = info->eth_phy; | |
1004 | info->link_status = 0x00; | |
1005 | init_timer(&info->watchdog); | |
1006 | info->watchdog.function = &ei_watchdog; | |
1007 | info->watchdog.data = (u_long)dev; | |
1008 | info->watchdog.expires = jiffies + HZ; | |
1009 | add_timer(&info->watchdog); | |
1010 | ||
1011 | return ei_open(dev); | |
1012 | } /* pcnet_open */ | |
1013 | ||
1014 | /*====================================================================*/ | |
1015 | ||
1016 | static int pcnet_close(struct net_device *dev) | |
1017 | { | |
1018 | pcnet_dev_t *info = PRIV(dev); | |
fba395ee | 1019 | struct pcmcia_device *link = info->p_dev; |
1da177e4 LT |
1020 | |
1021 | DEBUG(2, "pcnet_close('%s')\n", dev->name); | |
1022 | ||
1023 | ei_close(dev); | |
1024 | free_irq(dev->irq, dev); | |
1025 | ||
1026 | link->open--; | |
1027 | netif_stop_queue(dev); | |
1028 | del_timer_sync(&info->watchdog); | |
1029 | ||
1030 | return 0; | |
1031 | } /* pcnet_close */ | |
1032 | ||
1033 | /*====================================================================== | |
1034 | ||
1035 | Hard reset the card. This used to pause for the same period that | |
1036 | a 8390 reset command required, but that shouldn't be necessary. | |
1037 | ||
1038 | ======================================================================*/ | |
1039 | ||
1040 | static void pcnet_reset_8390(struct net_device *dev) | |
1041 | { | |
1042 | kio_addr_t nic_base = dev->base_addr; | |
1043 | int i; | |
1044 | ||
1045 | ei_status.txing = ei_status.dmaing = 0; | |
1046 | ||
1047 | outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD); | |
1048 | ||
1049 | outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET); | |
1050 | ||
1051 | for (i = 0; i < 100; i++) { | |
1052 | if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0) | |
1053 | break; | |
1054 | udelay(100); | |
1055 | } | |
1056 | outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */ | |
1057 | ||
1058 | if (i == 100) | |
1059 | printk(KERN_ERR "%s: pcnet_reset_8390() did not complete.\n", | |
1060 | dev->name); | |
1061 | set_misc_reg(dev); | |
1062 | ||
1063 | } /* pcnet_reset_8390 */ | |
1064 | ||
1065 | /*====================================================================*/ | |
1066 | ||
1067 | static int set_config(struct net_device *dev, struct ifmap *map) | |
1068 | { | |
1069 | pcnet_dev_t *info = PRIV(dev); | |
1070 | if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { | |
1071 | if (!(info->flags & HAS_MISC_REG)) | |
1072 | return -EOPNOTSUPP; | |
1073 | else if ((map->port < 1) || (map->port > 2)) | |
1074 | return -EINVAL; | |
1075 | dev->if_port = map->port; | |
1076 | printk(KERN_INFO "%s: switched to %s port\n", | |
1077 | dev->name, if_names[dev->if_port]); | |
1078 | NS8390_init(dev, 1); | |
1079 | } | |
1080 | return 0; | |
1081 | } | |
1082 | ||
1083 | /*====================================================================*/ | |
1084 | ||
1085 | static irqreturn_t ei_irq_wrapper(int irq, void *dev_id, struct pt_regs *regs) | |
1086 | { | |
1087 | struct net_device *dev = dev_id; | |
93ad4fb0 | 1088 | pcnet_dev_t *info; |
1da177e4 LT |
1089 | irqreturn_t ret = ei_interrupt(irq, dev_id, regs); |
1090 | ||
93ad4fb0 AM |
1091 | if (ret == IRQ_HANDLED) { |
1092 | info = PRIV(dev); | |
1da177e4 | 1093 | info->stale = 0; |
93ad4fb0 | 1094 | } |
1da177e4 LT |
1095 | return ret; |
1096 | } | |
1097 | ||
1098 | static void ei_watchdog(u_long arg) | |
1099 | { | |
1100 | struct net_device *dev = (struct net_device *)arg; | |
1101 | pcnet_dev_t *info = PRIV(dev); | |
1102 | kio_addr_t nic_base = dev->base_addr; | |
1103 | kio_addr_t mii_addr = nic_base + DLINK_GPIO; | |
1104 | u_short link; | |
1105 | ||
1106 | if (!netif_device_present(dev)) goto reschedule; | |
1107 | ||
1108 | /* Check for pending interrupt with expired latency timer: with | |
1109 | this, we can limp along even if the interrupt is blocked */ | |
1110 | outb_p(E8390_NODMA+E8390_PAGE0, nic_base + E8390_CMD); | |
1111 | if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) { | |
1112 | if (!info->fast_poll) | |
1113 | printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name); | |
1114 | ei_irq_wrapper(dev->irq, dev, NULL); | |
1115 | info->fast_poll = HZ; | |
1116 | } | |
1117 | if (info->fast_poll) { | |
1118 | info->fast_poll--; | |
1119 | info->watchdog.expires = jiffies + 1; | |
1120 | add_timer(&info->watchdog); | |
1121 | return; | |
1122 | } | |
1123 | ||
1124 | if (!(info->flags & HAS_MII)) | |
1125 | goto reschedule; | |
1126 | ||
1127 | mdio_read(mii_addr, info->phy_id, 1); | |
1128 | link = mdio_read(mii_addr, info->phy_id, 1); | |
1129 | if (!link || (link == 0xffff)) { | |
1130 | if (info->eth_phy) { | |
1131 | info->phy_id = info->eth_phy = 0; | |
1132 | } else { | |
1133 | printk(KERN_INFO "%s: MII is missing!\n", dev->name); | |
1134 | info->flags &= ~HAS_MII; | |
1135 | } | |
1136 | goto reschedule; | |
1137 | } | |
1138 | ||
1139 | link &= 0x0004; | |
1140 | if (link != info->link_status) { | |
1141 | u_short p = mdio_read(mii_addr, info->phy_id, 5); | |
1142 | printk(KERN_INFO "%s: %s link beat\n", dev->name, | |
1143 | (link) ? "found" : "lost"); | |
1144 | if (link && (info->flags & IS_DL10022)) { | |
1145 | /* Disable collision detection on full duplex links */ | |
1146 | outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG); | |
1147 | } else if (link && (info->flags & IS_DL10019)) { | |
1148 | /* Disable collision detection on full duplex links */ | |
1149 | write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0); | |
1150 | } | |
1151 | if (link) { | |
1152 | if (info->phy_id == info->eth_phy) { | |
1153 | if (p) | |
1154 | printk(KERN_INFO "%s: autonegotiation complete: " | |
1155 | "%sbaseT-%cD selected\n", dev->name, | |
1156 | ((p & 0x0180) ? "100" : "10"), | |
1157 | ((p & 0x0140) ? 'F' : 'H')); | |
1158 | else | |
1159 | printk(KERN_INFO "%s: link partner did not " | |
1160 | "autonegotiate\n", dev->name); | |
1161 | } | |
1162 | NS8390_init(dev, 1); | |
1163 | } | |
1164 | info->link_status = link; | |
1165 | } | |
1166 | if (info->pna_phy && time_after(jiffies, info->mii_reset + 6*HZ)) { | |
1167 | link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004; | |
1168 | if (((info->phy_id == info->pna_phy) && link) || | |
1169 | ((info->phy_id != info->pna_phy) && !link)) { | |
1170 | /* isolate this MII and try flipping to the other one */ | |
1171 | mdio_write(mii_addr, info->phy_id, 0, 0x0400); | |
1172 | info->phy_id ^= info->pna_phy ^ info->eth_phy; | |
1173 | printk(KERN_INFO "%s: switched to %s transceiver\n", dev->name, | |
1174 | (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); | |
1175 | mdio_write(mii_addr, info->phy_id, 0, | |
1176 | (info->phy_id == info->eth_phy) ? 0x1000 : 0); | |
1177 | info->link_status = 0; | |
1178 | info->mii_reset = jiffies; | |
1179 | } | |
1180 | } | |
1181 | ||
1182 | reschedule: | |
1183 | info->watchdog.expires = jiffies + HZ; | |
1184 | add_timer(&info->watchdog); | |
1185 | } | |
1186 | ||
1187 | /*====================================================================*/ | |
1188 | ||
1189 | static void netdev_get_drvinfo(struct net_device *dev, | |
1190 | struct ethtool_drvinfo *info) | |
1191 | { | |
1192 | strcpy(info->driver, "pcnet_cs"); | |
1193 | } | |
1194 | ||
1195 | static struct ethtool_ops netdev_ethtool_ops = { | |
1196 | .get_drvinfo = netdev_get_drvinfo, | |
1197 | }; | |
1198 | ||
1199 | /*====================================================================*/ | |
1200 | ||
1201 | ||
1202 | static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | |
1203 | { | |
1204 | pcnet_dev_t *info = PRIV(dev); | |
1205 | u16 *data = (u16 *)&rq->ifr_ifru; | |
1206 | kio_addr_t mii_addr = dev->base_addr + DLINK_GPIO; | |
1207 | switch (cmd) { | |
1208 | case SIOCGMIIPHY: | |
1209 | data[0] = info->phy_id; | |
1210 | case SIOCGMIIREG: /* Read MII PHY register. */ | |
1211 | data[3] = mdio_read(mii_addr, data[0], data[1] & 0x1f); | |
1212 | return 0; | |
1213 | case SIOCSMIIREG: /* Write MII PHY register. */ | |
1214 | if (!capable(CAP_NET_ADMIN)) | |
1215 | return -EPERM; | |
1216 | mdio_write(mii_addr, data[0], data[1] & 0x1f, data[2]); | |
1217 | return 0; | |
1218 | } | |
1219 | return -EOPNOTSUPP; | |
1220 | } | |
1221 | ||
1222 | /*====================================================================*/ | |
1223 | ||
1224 | static void dma_get_8390_hdr(struct net_device *dev, | |
1225 | struct e8390_pkt_hdr *hdr, | |
1226 | int ring_page) | |
1227 | { | |
1228 | kio_addr_t nic_base = dev->base_addr; | |
1229 | ||
1230 | if (ei_status.dmaing) { | |
1231 | printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input." | |
1232 | "[DMAstat:%1x][irqlock:%1x]\n", | |
1233 | dev->name, ei_status.dmaing, ei_status.irqlock); | |
1234 | return; | |
1235 | } | |
1236 | ||
1237 | ei_status.dmaing |= 0x01; | |
1238 | outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); | |
1239 | outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); | |
1240 | outb_p(0, nic_base + EN0_RCNTHI); | |
1241 | outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */ | |
1242 | outb_p(ring_page, nic_base + EN0_RSARHI); | |
1243 | outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); | |
1244 | ||
1245 | insw(nic_base + PCNET_DATAPORT, hdr, | |
1246 | sizeof(struct e8390_pkt_hdr)>>1); | |
1247 | /* Fix for big endian systems */ | |
1248 | hdr->count = le16_to_cpu(hdr->count); | |
1249 | ||
1250 | outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ | |
1251 | ei_status.dmaing &= ~0x01; | |
1252 | } | |
1253 | ||
1254 | /*====================================================================*/ | |
1255 | ||
1256 | static void dma_block_input(struct net_device *dev, int count, | |
1257 | struct sk_buff *skb, int ring_offset) | |
1258 | { | |
1259 | kio_addr_t nic_base = dev->base_addr; | |
1260 | int xfer_count = count; | |
1261 | char *buf = skb->data; | |
1262 | ||
1263 | #ifdef PCMCIA_DEBUG | |
1264 | if ((ei_debug > 4) && (count != 4)) | |
1265 | printk(KERN_DEBUG "%s: [bi=%d]\n", dev->name, count+4); | |
1266 | #endif | |
1267 | if (ei_status.dmaing) { | |
1268 | printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input." | |
1269 | "[DMAstat:%1x][irqlock:%1x]\n", | |
1270 | dev->name, ei_status.dmaing, ei_status.irqlock); | |
1271 | return; | |
1272 | } | |
1273 | ei_status.dmaing |= 0x01; | |
1274 | outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); | |
1275 | outb_p(count & 0xff, nic_base + EN0_RCNTLO); | |
1276 | outb_p(count >> 8, nic_base + EN0_RCNTHI); | |
1277 | outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); | |
1278 | outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); | |
1279 | outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); | |
1280 | ||
1281 | insw(nic_base + PCNET_DATAPORT,buf,count>>1); | |
1282 | if (count & 0x01) | |
1283 | buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++; | |
1284 | ||
93ad4fb0 | 1285 | /* This was for the ALPHA version only, but enough people have been |
1da177e4 LT |
1286 | encountering problems that it is still here. */ |
1287 | #ifdef PCMCIA_DEBUG | |
1288 | if (ei_debug > 4) { /* DMA termination address check... */ | |
1289 | int addr, tries = 20; | |
1290 | do { | |
1291 | /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here | |
1292 | -- it's broken for Rx on some cards! */ | |
1293 | int high = inb_p(nic_base + EN0_RSARHI); | |
1294 | int low = inb_p(nic_base + EN0_RSARLO); | |
1295 | addr = (high << 8) + low; | |
1296 | if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff)) | |
1297 | break; | |
1298 | } while (--tries > 0); | |
1299 | if (tries <= 0) | |
1300 | printk(KERN_NOTICE "%s: RX transfer address mismatch," | |
1301 | "%#4.4x (expected) vs. %#4.4x (actual).\n", | |
1302 | dev->name, ring_offset + xfer_count, addr); | |
1303 | } | |
1304 | #endif | |
1305 | outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ | |
1306 | ei_status.dmaing &= ~0x01; | |
1307 | } /* dma_block_input */ | |
1308 | ||
1309 | /*====================================================================*/ | |
1310 | ||
1311 | static void dma_block_output(struct net_device *dev, int count, | |
1312 | const u_char *buf, const int start_page) | |
1313 | { | |
1314 | kio_addr_t nic_base = dev->base_addr; | |
1315 | pcnet_dev_t *info = PRIV(dev); | |
1316 | #ifdef PCMCIA_DEBUG | |
1317 | int retries = 0; | |
1318 | #endif | |
1319 | u_long dma_start; | |
1320 | ||
1321 | #ifdef PCMCIA_DEBUG | |
1322 | if (ei_debug > 4) | |
1323 | printk(KERN_DEBUG "%s: [bo=%d]\n", dev->name, count); | |
1324 | #endif | |
1325 | ||
1326 | /* Round the count up for word writes. Do we need to do this? | |
1327 | What effect will an odd byte count have on the 8390? | |
1328 | I should check someday. */ | |
1329 | if (count & 0x01) | |
1330 | count++; | |
1331 | if (ei_status.dmaing) { | |
1332 | printk(KERN_NOTICE "%s: DMAing conflict in dma_block_output." | |
1333 | "[DMAstat:%1x][irqlock:%1x]\n", | |
1334 | dev->name, ei_status.dmaing, ei_status.irqlock); | |
1335 | return; | |
1336 | } | |
1337 | ei_status.dmaing |= 0x01; | |
1338 | /* We should already be in page 0, but to be safe... */ | |
1339 | outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD); | |
1340 | ||
1341 | #ifdef PCMCIA_DEBUG | |
1342 | retry: | |
1343 | #endif | |
1344 | ||
1345 | outb_p(ENISR_RDC, nic_base + EN0_ISR); | |
1346 | ||
1347 | /* Now the normal output. */ | |
1348 | outb_p(count & 0xff, nic_base + EN0_RCNTLO); | |
1349 | outb_p(count >> 8, nic_base + EN0_RCNTHI); | |
1350 | outb_p(0x00, nic_base + EN0_RSARLO); | |
1351 | outb_p(start_page, nic_base + EN0_RSARHI); | |
1352 | ||
1353 | outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD); | |
1354 | outsw(nic_base + PCNET_DATAPORT, buf, count>>1); | |
1355 | ||
1356 | dma_start = jiffies; | |
1357 | ||
1358 | #ifdef PCMCIA_DEBUG | |
93ad4fb0 | 1359 | /* This was for the ALPHA version only, but enough people have been |
1da177e4 LT |
1360 | encountering problems that it is still here. */ |
1361 | if (ei_debug > 4) { /* DMA termination address check... */ | |
1362 | int addr, tries = 20; | |
1363 | do { | |
1364 | int high = inb_p(nic_base + EN0_RSARHI); | |
1365 | int low = inb_p(nic_base + EN0_RSARLO); | |
1366 | addr = (high << 8) + low; | |
1367 | if ((start_page << 8) + count == addr) | |
1368 | break; | |
1369 | } while (--tries > 0); | |
1370 | if (tries <= 0) { | |
1371 | printk(KERN_NOTICE "%s: Tx packet transfer address mismatch," | |
1372 | "%#4.4x (expected) vs. %#4.4x (actual).\n", | |
1373 | dev->name, (start_page << 8) + count, addr); | |
1374 | if (retries++ == 0) | |
1375 | goto retry; | |
1376 | } | |
1377 | } | |
1378 | #endif | |
1379 | ||
1380 | while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) | |
1381 | if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) { | |
1382 | printk(KERN_NOTICE "%s: timeout waiting for Tx RDC.\n", | |
1383 | dev->name); | |
1384 | pcnet_reset_8390(dev); | |
1385 | NS8390_init(dev, 1); | |
1386 | break; | |
1387 | } | |
1388 | ||
1389 | outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ | |
1390 | if (info->flags & DELAY_OUTPUT) | |
1391 | udelay((long)delay_time); | |
1392 | ei_status.dmaing &= ~0x01; | |
1393 | } | |
1394 | ||
1395 | /*====================================================================*/ | |
1396 | ||
fba395ee | 1397 | static int setup_dma_config(struct pcmcia_device *link, int start_pg, |
1da177e4 LT |
1398 | int stop_pg) |
1399 | { | |
1400 | struct net_device *dev = link->priv; | |
1401 | ||
1402 | ei_status.tx_start_page = start_pg; | |
1403 | ei_status.rx_start_page = start_pg + TX_PAGES; | |
1404 | ei_status.stop_page = stop_pg; | |
1405 | ||
1406 | /* set up block i/o functions */ | |
1407 | ei_status.get_8390_hdr = &dma_get_8390_hdr; | |
1408 | ei_status.block_input = &dma_block_input; | |
1409 | ei_status.block_output = &dma_block_output; | |
1410 | ||
1411 | return 0; | |
1412 | } | |
1413 | ||
1414 | /*====================================================================*/ | |
1415 | ||
1416 | static void copyin(void *dest, void __iomem *src, int c) | |
1417 | { | |
1418 | u_short *d = dest; | |
1419 | u_short __iomem *s = src; | |
1420 | int odd; | |
1421 | ||
1422 | if (c <= 0) | |
1423 | return; | |
1424 | odd = (c & 1); c >>= 1; | |
1425 | ||
1426 | if (c) { | |
1427 | do { *d++ = __raw_readw(s++); } while (--c); | |
1428 | } | |
1429 | /* get last byte by fetching a word and masking */ | |
1430 | if (odd) | |
1431 | *((u_char *)d) = readw(s) & 0xff; | |
1432 | } | |
1433 | ||
1434 | static void copyout(void __iomem *dest, const void *src, int c) | |
1435 | { | |
1436 | u_short __iomem *d = dest; | |
1437 | const u_short *s = src; | |
1438 | int odd; | |
1439 | ||
1440 | if (c <= 0) | |
1441 | return; | |
1442 | odd = (c & 1); c >>= 1; | |
1443 | ||
1444 | if (c) { | |
1445 | do { __raw_writew(*s++, d++); } while (--c); | |
1446 | } | |
1447 | /* copy last byte doing a read-modify-write */ | |
1448 | if (odd) | |
1449 | writew((readw(d) & 0xff00) | *(u_char *)s, d); | |
1450 | } | |
1451 | ||
1452 | /*====================================================================*/ | |
1453 | ||
1454 | static void shmem_get_8390_hdr(struct net_device *dev, | |
1455 | struct e8390_pkt_hdr *hdr, | |
1456 | int ring_page) | |
1457 | { | |
1458 | void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8) | |
1459 | + (ring_page << 8) | |
1460 | - (ei_status.rx_start_page << 8); | |
1461 | ||
1462 | copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr)); | |
1463 | /* Fix for big endian systems */ | |
1464 | hdr->count = le16_to_cpu(hdr->count); | |
1465 | } | |
1466 | ||
1467 | /*====================================================================*/ | |
1468 | ||
1469 | static void shmem_block_input(struct net_device *dev, int count, | |
1470 | struct sk_buff *skb, int ring_offset) | |
1471 | { | |
99417769 AV |
1472 | void __iomem *base = ei_status.mem; |
1473 | unsigned long offset = (TX_PAGES<<8) + ring_offset | |
1da177e4 LT |
1474 | - (ei_status.rx_start_page << 8); |
1475 | char *buf = skb->data; | |
1476 | ||
99417769 | 1477 | if (offset + count > ei_status.priv) { |
1da177e4 | 1478 | /* We must wrap the input move. */ |
99417769 AV |
1479 | int semi_count = ei_status.priv - offset; |
1480 | copyin(buf, base + offset, semi_count); | |
1da177e4 | 1481 | buf += semi_count; |
99417769 | 1482 | offset = TX_PAGES<<8; |
1da177e4 LT |
1483 | count -= semi_count; |
1484 | } | |
99417769 | 1485 | copyin(buf, base + offset, count); |
1da177e4 LT |
1486 | } |
1487 | ||
1488 | /*====================================================================*/ | |
1489 | ||
1490 | static void shmem_block_output(struct net_device *dev, int count, | |
1491 | const u_char *buf, const int start_page) | |
1492 | { | |
1493 | void __iomem *shmem = ei_status.mem + (start_page << 8); | |
1494 | shmem -= ei_status.tx_start_page << 8; | |
1495 | copyout(shmem, buf, count); | |
1496 | } | |
1497 | ||
1498 | /*====================================================================*/ | |
1499 | ||
fba395ee | 1500 | static int setup_shmem_window(struct pcmcia_device *link, int start_pg, |
1da177e4 LT |
1501 | int stop_pg, int cm_offset) |
1502 | { | |
1503 | struct net_device *dev = link->priv; | |
1504 | pcnet_dev_t *info = PRIV(dev); | |
1505 | win_req_t req; | |
1506 | memreq_t mem; | |
1507 | int i, window_size, offset, last_ret, last_fn; | |
1508 | ||
1509 | window_size = (stop_pg - start_pg) << 8; | |
1510 | if (window_size > 32 * 1024) | |
1511 | window_size = 32 * 1024; | |
1512 | ||
1513 | /* Make sure it's a power of two. */ | |
1514 | while ((window_size & (window_size - 1)) != 0) | |
1515 | window_size += window_size & ~(window_size - 1); | |
1516 | ||
1517 | /* Allocate a memory window */ | |
1518 | req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; | |
1519 | req.Attributes |= WIN_USE_WAIT; | |
1520 | req.Base = 0; req.Size = window_size; | |
1521 | req.AccessSpeed = mem_speed; | |
fba395ee | 1522 | CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win)); |
1da177e4 LT |
1523 | |
1524 | mem.CardOffset = (start_pg << 8) + cm_offset; | |
1525 | offset = mem.CardOffset % window_size; | |
1526 | mem.CardOffset -= offset; | |
1527 | mem.Page = 0; | |
1528 | CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem)); | |
1529 | ||
1530 | /* Try scribbling on the buffer */ | |
1531 | info->base = ioremap(req.Base, window_size); | |
1532 | for (i = 0; i < (TX_PAGES<<8); i += 2) | |
1533 | __raw_writew((i>>1), info->base+offset+i); | |
1534 | udelay(100); | |
1535 | for (i = 0; i < (TX_PAGES<<8); i += 2) | |
1536 | if (__raw_readw(info->base+offset+i) != (i>>1)) break; | |
1537 | pcnet_reset_8390(dev); | |
1538 | if (i != (TX_PAGES<<8)) { | |
1539 | iounmap(info->base); | |
1540 | pcmcia_release_window(link->win); | |
1541 | info->base = NULL; link->win = NULL; | |
1542 | goto failed; | |
1543 | } | |
1544 | ||
1545 | ei_status.mem = info->base + offset; | |
99417769 | 1546 | ei_status.priv = req.Size; |
1da177e4 | 1547 | dev->mem_start = (u_long)ei_status.mem; |
99417769 | 1548 | dev->mem_end = dev->mem_start + req.Size; |
1da177e4 LT |
1549 | |
1550 | ei_status.tx_start_page = start_pg; | |
1551 | ei_status.rx_start_page = start_pg + TX_PAGES; | |
1552 | ei_status.stop_page = start_pg + ((req.Size - offset) >> 8); | |
1553 | ||
1554 | /* set up block i/o functions */ | |
1555 | ei_status.get_8390_hdr = &shmem_get_8390_hdr; | |
1556 | ei_status.block_input = &shmem_block_input; | |
1557 | ei_status.block_output = &shmem_block_output; | |
1558 | ||
1559 | info->flags |= USE_SHMEM; | |
1560 | return 0; | |
1561 | ||
1562 | cs_failed: | |
fba395ee | 1563 | cs_error(link, last_fn, last_ret); |
1da177e4 LT |
1564 | failed: |
1565 | return 1; | |
1566 | } | |
1567 | ||
1568 | /*====================================================================*/ | |
1569 | ||
ce8a0037 DB |
1570 | static struct pcmcia_device_id pcnet_ids[] = { |
1571 | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0057, 0x0021), | |
1572 | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0104, 0x000a), | |
1573 | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0xea15), | |
1574 | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0x3341), | |
1575 | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab), | |
1576 | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101), | |
1577 | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab), | |
d277ad0e | 1578 | PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), |
ce8a0037 DB |
1579 | PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), |
1580 | PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), | |
1581 | PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), | |
1582 | PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), | |
1583 | PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), | |
1584 | PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), | |
1585 | PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), | |
1586 | PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), | |
1587 | PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), | |
1588 | PCMCIA_MFC_DEVICE_PROD_ID123(0, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), | |
1589 | PCMCIA_MFC_DEVICE_PROD_ID2(0, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), | |
1590 | PCMCIA_DEVICE_MANF_CARD(0x0057, 0x1004), | |
1591 | PCMCIA_DEVICE_MANF_CARD(0x0104, 0x000d), | |
1592 | PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0075), | |
1593 | PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145), | |
1594 | PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230), | |
1595 | PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530), | |
1596 | /* PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), conflict with axnet_cs */ | |
1597 | PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110), | |
1598 | PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328), | |
1599 | PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041), | |
1600 | PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452), | |
1601 | /* PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), conflict with axnet_cs */ | |
1602 | PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300), | |
1603 | PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307), | |
1604 | PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a), | |
1605 | PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103), | |
1606 | PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121), | |
1607 | PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941), | |
1608 | PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b), | |
1609 | PCMCIA_DEVICE_PROD_ID123("CNet ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b), | |
1610 | PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e), | |
1611 | PCMCIA_DEVICE_PROD_ID123("Edimax Technology Inc.", "PCMCIA", "Ethernet Card", 0x738a0019, 0x281f1c5d, 0x5e9d92c0), | |
1612 | PCMCIA_DEVICE_PROD_ID123("EFA ", "EFA207", "ETHERNET", 0x3d294be4, 0xeb9aab6c, 0x3ff7175b), | |
1613 | PCMCIA_DEVICE_PROD_ID123("I-O DATA", "PCLA", "ETHERNET", 0x1d55d7ec, 0xe4c64d34, 0x3ff7175b), | |
1614 | PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCLATE", "ETHERNET", 0x547e66dc, 0x6b260753, 0x3ff7175b), | |
1615 | PCMCIA_DEVICE_PROD_ID123("KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card", 0x932b7189, 0x699e4436, 0x6f6652e0), | |
1616 | PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216", 0x281f1c5d, 0xd4cd2f20, 0xb87add82), | |
1617 | PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620", 0x281f1c5d, 0xd4cd2f20, 0x7d3d83a8), | |
1618 | PCMCIA_DEVICE_PROD_ID1("2412LAN", 0x67f236ab), | |
1619 | PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11), | |
1620 | PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff), | |
1621 | PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68), | |
ce8a0037 | 1622 | PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997), |
9c7046cd JK |
1623 | PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8), |
1624 | PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96), | |
ce8a0037 DB |
1625 | PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96), |
1626 | PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224), | |
1627 | PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002", 0x93b15570, 0x75ec3efb), | |
1628 | PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002T", 0x93b15570, 0x461c5247), | |
1629 | PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8010", 0x93b15570, 0x82f96e96), | |
1630 | PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet", 0x578ba6e7, 0x0a9888c1), | |
1631 | PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet 10/100", 0x578ba6e7, 0x939fedbd), | |
1632 | PCMCIA_DEVICE_PROD_ID12("AROWANA", "PCMCIA Ethernet LAN Card", 0x313adbc8, 0x08d9f190), | |
1633 | PCMCIA_DEVICE_PROD_ID12("ASANTE", "FriendlyNet PC Card", 0x3a7ade0f, 0x41c64504), | |
1634 | PCMCIA_DEVICE_PROD_ID12("Billionton", "LNT-10TB", 0x552ab682, 0xeeb1ba6a), | |
1635 | PCMCIA_DEVICE_PROD_ID12("CF", "10Base-Ethernet", 0x44ebf863, 0x93ae4d79), | |
1636 | PCMCIA_DEVICE_PROD_ID12("CNet", "CN40BC Ethernet", 0xbc477dde, 0xfba775a7), | |
1637 | PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter", 0xfa2e424d, 0xe9190d8a), | |
1638 | PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9), | |
1639 | PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722), | |
1640 | PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2), | |
1641 | PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd), | |
1642 | PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d), | |
1643 | PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa), | |
1644 | PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9), | |
1645 | PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2), | |
1646 | PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2), | |
1647 | PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04), | |
1648 | PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d), | |
1649 | PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814), | |
1650 | PCMCIA_DEVICE_PROD_ID12("DataTrek.", "NetCard ", 0x5cd66d9d, 0x84697ce0), | |
1651 | PCMCIA_DEVICE_PROD_ID12("Dayna Communications, Inc.", "CommuniCard E", 0x0c629325, 0xb4e7dbaf), | |
1652 | PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100", 0x697403d8, 0xe160b995), | |
1653 | PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100 Dongless", 0x697403d8, 0xa6d3b233), | |
1654 | PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e), | |
1655 | PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398), | |
1656 | PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b), | |
d277ad0e | 1657 | PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec), |
ce8a0037 DB |
1658 | PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9), |
1659 | PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84), | |
1660 | PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9), | |
1661 | PCMCIA_DEVICE_PROD_ID12("Dynalink", "L10BC", 0x55632fd5, 0xdc65f2b1), | |
1662 | PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10BC", 0x6a26d1cf, 0xdc65f2b1), | |
1663 | PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10C", 0x6a26d1cf, 0xc4f84efb), | |
1664 | PCMCIA_DEVICE_PROD_ID12("E-CARD", "E-CARD", 0x6701da11, 0x6701da11), | |
1665 | PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet 10BaseT card", 0x53c864c6, 0xedd059f6), | |
1666 | PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet Combo card", 0x53c864c6, 0x929c486c), | |
1667 | PCMCIA_DEVICE_PROD_ID12("Ethernet", "Adapter", 0x00b2e941, 0x4b0d829e), | |
1668 | PCMCIA_DEVICE_PROD_ID12("Ethernet Adapter", "E2000 PCMCIA Ethernet", 0x96767301, 0x71fbbc61), | |
1669 | PCMCIA_DEVICE_PROD_ID12("Ethernet PCMCIA adapter", "EP-210", 0x8dd86181, 0xf2b52517), | |
1670 | PCMCIA_DEVICE_PROD_ID12("Fast Ethernet", "Adapter", 0xb4be14e3, 0x4b0d829e), | |
1671 | PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2000", 0x2a151fac, 0xf00555cb), | |
1672 | PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2220", 0x2a151fac, 0xc1b7e327), | |
1673 | PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947), | |
1674 | PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941), | |
1675 | PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6), | |
d277ad0e | 1676 | PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494), |
ce8a0037 DB |
1677 | PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b), |
1678 | PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0), | |
1679 | PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956), | |
1680 | PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64), | |
1681 | PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5), | |
1682 | PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3), | |
1683 | PCMCIA_DEVICE_PROD_ID12("Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter", 0x313c7be3, 0x0afb54a2), | |
1684 | PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-10/100CD", 0x1b7827b2, 0xcda71d1c), | |
1685 | PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDF", 0x1b7827b2, 0xfec71e40), | |
1686 | PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDL/T", 0x1b7827b2, 0x79fba4f7), | |
9c7046cd | 1687 | PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDS", 0x1b7827b2, 0x931afaab), |
ce8a0037 DB |
1688 | PCMCIA_DEVICE_PROD_ID12("Linksys", "Combo PCMCIA EthernetCard (EC2T)", 0x0733cc81, 0x32ee8c78), |
1689 | PCMCIA_DEVICE_PROD_ID12("LINKSYS", "E-CARD", 0xf7cb0b07, 0x6701da11), | |
1690 | PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d), | |
1691 | PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389), | |
1692 | PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9), | |
d277ad0e | 1693 | PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a), |
ce8a0037 | 1694 | PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737), |
c96a34ec | 1695 | PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee), |
ce8a0037 DB |
1696 | PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922), |
1697 | PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0), | |
1698 | PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578), | |
1699 | PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307), | |
1700 | PCMCIA_DEVICE_PROD_ID12("Matsushita Electric Industrial Co.,LTD.", "CF-VEL211", 0x44445376, 0x8ded41d4), | |
1701 | PCMCIA_DEVICE_PROD_ID12("MAXTECH", "PCN2000", 0x78d64bc0, 0xca0ca4b8), | |
1702 | PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-T", 0x481e0094, 0xa2eb0cf3), | |
1703 | PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-TX", 0x481e0094, 0x41a6916c), | |
1704 | PCMCIA_DEVICE_PROD_ID12("Microcom C.E.", "Travel Card LAN 10/100", 0x4b91cec7, 0xe70220d6), | |
1705 | PCMCIA_DEVICE_PROD_ID12("Microdyne", "NE4200", 0x2e6da59b, 0x0478e472), | |
1706 | PCMCIA_DEVICE_PROD_ID12("MIDORI ELEC.", "LT-PCMT", 0x648d55c1, 0xbde526c7), | |
1707 | PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover 4100", 0x36e1191f, 0x60c229b9), | |
1708 | PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), | |
1709 | PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), | |
1710 | PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), | |
1711 | PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), | |
1712 | PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), | |
9c7046cd | 1713 | PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), |
ce8a0037 DB |
1714 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), |
1715 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet", 0x281f1c5d, 0x00b2e941), | |
1716 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET", 0x281f1c5d, 0x3ff7175b), | |
1717 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet 10BaseT Card", 0x281f1c5d, 0x4de2f6c8), | |
1718 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Card", 0x281f1c5d, 0x5e9d92c0), | |
1719 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Combo card", 0x281f1c5d, 0x929c486c), | |
1720 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET V1.0", 0x281f1c5d, 0x4d8817c8), | |
1721 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEthernet", 0x281f1c5d, 0xfe871eeb), | |
1722 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast-Ethernet", 0x281f1c5d, 0x45f1f3b4), | |
1723 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FAST ETHERNET CARD", 0x281f1c5d, 0xec5dbca7), | |
1724 | PCMCIA_DEVICE_PROD_ID12("PCMCIA LAN", "Ethernet", 0x7500e246, 0x00b2e941), | |
1725 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "LNT-10TN", 0x281f1c5d, 0xe707f641), | |
1726 | PCMCIA_DEVICE_PROD_ID12("PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), | |
1727 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "UE2212", 0x281f1c5d, 0xbf17199b), | |
1728 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", " Ethernet NE2000 Compatible", 0x281f1c5d, 0x42d5d7e1), | |
1729 | PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10baseT 3.3V", 0xebf91155, 0x30074c80), | |
1730 | PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50), | |
1731 | PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110), | |
1732 | PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941), | |
1733 | PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df), | |
1734 | PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0), | |
1735 | PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd), | |
1736 | PCMCIA_DEVICE_PROD_ID12("RPTI LTD.", "EP400", 0xc53ac515, 0x81e39388), | |
1737 | PCMCIA_DEVICE_PROD_ID12("SCM", "Ethernet Combo card", 0xbdc3b102, 0x929c486c), | |
1738 | PCMCIA_DEVICE_PROD_ID12("Seiko Epson Corp.", "Ethernet", 0x09928730, 0x00b2e941), | |
1739 | PCMCIA_DEVICE_PROD_ID12("SMC", "EZCard-10-PCMCIA", 0xc4f8b18b, 0xfb21d265), | |
1740 | PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision D", 0xc70a4760, 0x2ade483e), | |
1741 | PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision E", 0xc70a4760, 0x5dd978a8), | |
1742 | PCMCIA_DEVICE_PROD_ID12("TDK", "LAK-CD031 for PCMCIA", 0x1eae9475, 0x0ed386fa), | |
1743 | PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE450T", 0x466b05f0, 0x8b74bc4f), | |
9c7046cd | 1744 | PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE550T", 0x466b05f0, 0x33c8db2a), |
ce8a0037 DB |
1745 | PCMCIA_DEVICE_PROD_ID13("Hypertec", "EP401", 0x8787bec7, 0xf6e4a31e), |
1746 | PCMCIA_DEVICE_PROD_ID13("KingMax Technology Inc.", "Ethernet Card", 0x932b7189, 0x5e9d92c0), | |
1747 | PCMCIA_DEVICE_PROD_ID13("LONGSHINE", "EP401", 0xf866b0b0, 0xf6e4a31e), | |
1748 | PCMCIA_DEVICE_PROD_ID13("Xircom", "CFE-10", 0x2e3ee845, 0x22a49f89), | |
1749 | PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360), | |
1750 | PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de), | |
1751 | PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f), | |
1752 | PCMCIA_DEVICE_PROD_ID1("IC-CARD", 0x60cb09a6), | |
1753 | PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a), | |
1754 | PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078), | |
1755 | /* too generic! */ | |
1756 | /* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */ | |
1757 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"), | |
1758 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"), | |
1759 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"), | |
1760 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"), | |
1761 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"), | |
1762 | PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), | |
1763 | PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), | |
1764 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"), | |
1765 | PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "LA-PCM.cis"), | |
1766 | PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"), | |
1767 | PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"), | |
1768 | PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), | |
1769 | PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"), | |
1770 | PCMCIA_DEVICE_NULL | |
1771 | }; | |
1772 | MODULE_DEVICE_TABLE(pcmcia, pcnet_ids); | |
1773 | ||
1da177e4 LT |
1774 | static struct pcmcia_driver pcnet_driver = { |
1775 | .drv = { | |
1776 | .name = "pcnet_cs", | |
1777 | }, | |
f8cfa618 | 1778 | .probe = pcnet_probe, |
cc3b4866 | 1779 | .remove = pcnet_detach, |
1da177e4 | 1780 | .owner = THIS_MODULE, |
ce8a0037 | 1781 | .id_table = pcnet_ids, |
98e4c28b DB |
1782 | .suspend = pcnet_suspend, |
1783 | .resume = pcnet_resume, | |
1da177e4 LT |
1784 | }; |
1785 | ||
1786 | static int __init init_pcnet_cs(void) | |
1787 | { | |
1788 | return pcmcia_register_driver(&pcnet_driver); | |
1789 | } | |
1790 | ||
1791 | static void __exit exit_pcnet_cs(void) | |
1792 | { | |
1793 | DEBUG(0, "pcnet_cs: unloading\n"); | |
1794 | pcmcia_unregister_driver(&pcnet_driver); | |
1da177e4 LT |
1795 | } |
1796 | ||
1797 | module_init(init_pcnet_cs); | |
1798 | module_exit(exit_pcnet_cs); |