]>
Commit | Line | Data |
---|---|---|
00db8189 AF |
1 | /* |
2 | * drivers/net/phy/phy.c | |
3 | * | |
4 | * Framework for configuring and reading PHY devices | |
5 | * Based on code in sungem_phy.c and gianfar_phy.c | |
6 | * | |
7 | * Author: Andy Fleming | |
8 | * | |
9 | * Copyright (c) 2004 Freescale Semiconductor, Inc. | |
0ac49527 | 10 | * Copyright (c) 2006, 2007 Maciej W. Rozycki |
00db8189 AF |
11 | * |
12 | * This program is free software; you can redistribute it and/or modify it | |
13 | * under the terms of the GNU General Public License as published by the | |
14 | * Free Software Foundation; either version 2 of the License, or (at your | |
15 | * option) any later version. | |
16 | * | |
17 | */ | |
00db8189 | 18 | #include <linux/kernel.h> |
00db8189 AF |
19 | #include <linux/string.h> |
20 | #include <linux/errno.h> | |
21 | #include <linux/unistd.h> | |
00db8189 AF |
22 | #include <linux/interrupt.h> |
23 | #include <linux/init.h> | |
24 | #include <linux/delay.h> | |
25 | #include <linux/netdevice.h> | |
26 | #include <linux/etherdevice.h> | |
27 | #include <linux/skbuff.h> | |
00db8189 AF |
28 | #include <linux/mm.h> |
29 | #include <linux/module.h> | |
00db8189 AF |
30 | #include <linux/mii.h> |
31 | #include <linux/ethtool.h> | |
32 | #include <linux/phy.h> | |
3c3070d7 MR |
33 | #include <linux/timer.h> |
34 | #include <linux/workqueue.h> | |
00db8189 | 35 | |
60063497 | 36 | #include <linux/atomic.h> |
00db8189 AF |
37 | #include <asm/io.h> |
38 | #include <asm/irq.h> | |
39 | #include <asm/uaccess.h> | |
40 | ||
b3df0da8 RD |
41 | /** |
42 | * phy_print_status - Convenience function to print out the current phy status | |
43 | * @phydev: the phy_device struct | |
e1393456 AF |
44 | */ |
45 | void phy_print_status(struct phy_device *phydev) | |
46 | { | |
fb28ad35 | 47 | pr_info("PHY: %s - Link is %s", dev_name(&phydev->dev), |
e1393456 AF |
48 | phydev->link ? "Up" : "Down"); |
49 | if (phydev->link) | |
a40c9f88 | 50 | printk(KERN_CONT " - %d/%s", phydev->speed, |
e1393456 AF |
51 | DUPLEX_FULL == phydev->duplex ? |
52 | "Full" : "Half"); | |
53 | ||
a40c9f88 | 54 | printk(KERN_CONT "\n"); |
e1393456 AF |
55 | } |
56 | EXPORT_SYMBOL(phy_print_status); | |
00db8189 AF |
57 | |
58 | ||
b3df0da8 RD |
59 | /** |
60 | * phy_clear_interrupt - Ack the phy device's interrupt | |
61 | * @phydev: the phy_device struct | |
62 | * | |
63 | * If the @phydev driver has an ack_interrupt function, call it to | |
64 | * ack and clear the phy device's interrupt. | |
65 | * | |
66 | * Returns 0 on success on < 0 on error. | |
67 | */ | |
89ff05ec | 68 | static int phy_clear_interrupt(struct phy_device *phydev) |
00db8189 AF |
69 | { |
70 | int err = 0; | |
71 | ||
72 | if (phydev->drv->ack_interrupt) | |
73 | err = phydev->drv->ack_interrupt(phydev); | |
74 | ||
75 | return err; | |
76 | } | |
77 | ||
b3df0da8 RD |
78 | /** |
79 | * phy_config_interrupt - configure the PHY device for the requested interrupts | |
80 | * @phydev: the phy_device struct | |
81 | * @interrupts: interrupt flags to configure for this @phydev | |
82 | * | |
83 | * Returns 0 on success on < 0 on error. | |
84 | */ | |
89ff05ec | 85 | static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts) |
00db8189 AF |
86 | { |
87 | int err = 0; | |
88 | ||
89 | phydev->interrupts = interrupts; | |
90 | if (phydev->drv->config_intr) | |
91 | err = phydev->drv->config_intr(phydev); | |
92 | ||
93 | return err; | |
94 | } | |
95 | ||
96 | ||
b3df0da8 RD |
97 | /** |
98 | * phy_aneg_done - return auto-negotiation status | |
99 | * @phydev: target phy_device struct | |
00db8189 | 100 | * |
b3df0da8 | 101 | * Description: Reads the status register and returns 0 either if |
00db8189 AF |
102 | * auto-negotiation is incomplete, or if there was an error. |
103 | * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done. | |
104 | */ | |
105 | static inline int phy_aneg_done(struct phy_device *phydev) | |
106 | { | |
107 | int retval; | |
108 | ||
109 | retval = phy_read(phydev, MII_BMSR); | |
110 | ||
111 | return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); | |
112 | } | |
113 | ||
00db8189 AF |
114 | /* A structure for mapping a particular speed and duplex |
115 | * combination to a particular SUPPORTED and ADVERTISED value */ | |
116 | struct phy_setting { | |
117 | int speed; | |
118 | int duplex; | |
119 | u32 setting; | |
120 | }; | |
121 | ||
122 | /* A mapping of all SUPPORTED settings to speed/duplex */ | |
f71e1309 | 123 | static const struct phy_setting settings[] = { |
00db8189 AF |
124 | { |
125 | .speed = 10000, | |
126 | .duplex = DUPLEX_FULL, | |
127 | .setting = SUPPORTED_10000baseT_Full, | |
128 | }, | |
129 | { | |
130 | .speed = SPEED_1000, | |
131 | .duplex = DUPLEX_FULL, | |
132 | .setting = SUPPORTED_1000baseT_Full, | |
133 | }, | |
134 | { | |
135 | .speed = SPEED_1000, | |
136 | .duplex = DUPLEX_HALF, | |
137 | .setting = SUPPORTED_1000baseT_Half, | |
138 | }, | |
139 | { | |
140 | .speed = SPEED_100, | |
141 | .duplex = DUPLEX_FULL, | |
142 | .setting = SUPPORTED_100baseT_Full, | |
143 | }, | |
144 | { | |
145 | .speed = SPEED_100, | |
146 | .duplex = DUPLEX_HALF, | |
147 | .setting = SUPPORTED_100baseT_Half, | |
148 | }, | |
149 | { | |
150 | .speed = SPEED_10, | |
151 | .duplex = DUPLEX_FULL, | |
152 | .setting = SUPPORTED_10baseT_Full, | |
153 | }, | |
154 | { | |
155 | .speed = SPEED_10, | |
156 | .duplex = DUPLEX_HALF, | |
157 | .setting = SUPPORTED_10baseT_Half, | |
158 | }, | |
159 | }; | |
160 | ||
ff8ac609 | 161 | #define MAX_NUM_SETTINGS ARRAY_SIZE(settings) |
00db8189 | 162 | |
b3df0da8 RD |
163 | /** |
164 | * phy_find_setting - find a PHY settings array entry that matches speed & duplex | |
165 | * @speed: speed to match | |
166 | * @duplex: duplex to match | |
00db8189 | 167 | * |
b3df0da8 | 168 | * Description: Searches the settings array for the setting which |
00db8189 AF |
169 | * matches the desired speed and duplex, and returns the index |
170 | * of that setting. Returns the index of the last setting if | |
171 | * none of the others match. | |
172 | */ | |
173 | static inline int phy_find_setting(int speed, int duplex) | |
174 | { | |
175 | int idx = 0; | |
176 | ||
177 | while (idx < ARRAY_SIZE(settings) && | |
178 | (settings[idx].speed != speed || | |
179 | settings[idx].duplex != duplex)) | |
180 | idx++; | |
181 | ||
182 | return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; | |
183 | } | |
184 | ||
b3df0da8 RD |
185 | /** |
186 | * phy_find_valid - find a PHY setting that matches the requested features mask | |
187 | * @idx: The first index in settings[] to search | |
188 | * @features: A mask of the valid settings | |
00db8189 | 189 | * |
b3df0da8 | 190 | * Description: Returns the index of the first valid setting less |
00db8189 AF |
191 | * than or equal to the one pointed to by idx, as determined by |
192 | * the mask in features. Returns the index of the last setting | |
193 | * if nothing else matches. | |
194 | */ | |
195 | static inline int phy_find_valid(int idx, u32 features) | |
196 | { | |
197 | while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features)) | |
198 | idx++; | |
199 | ||
200 | return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1; | |
201 | } | |
202 | ||
b3df0da8 RD |
203 | /** |
204 | * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex | |
205 | * @phydev: the target phy_device struct | |
00db8189 | 206 | * |
b3df0da8 | 207 | * Description: Make sure the PHY is set to supported speeds and |
00db8189 | 208 | * duplexes. Drop down by one in this order: 1000/FULL, |
b3df0da8 | 209 | * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF. |
00db8189 | 210 | */ |
89ff05ec | 211 | static void phy_sanitize_settings(struct phy_device *phydev) |
00db8189 AF |
212 | { |
213 | u32 features = phydev->supported; | |
214 | int idx; | |
215 | ||
216 | /* Sanitize settings based on PHY capabilities */ | |
217 | if ((features & SUPPORTED_Autoneg) == 0) | |
163642a2 | 218 | phydev->autoneg = AUTONEG_DISABLE; |
00db8189 AF |
219 | |
220 | idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex), | |
221 | features); | |
222 | ||
223 | phydev->speed = settings[idx].speed; | |
224 | phydev->duplex = settings[idx].duplex; | |
225 | } | |
00db8189 | 226 | |
b3df0da8 RD |
227 | /** |
228 | * phy_ethtool_sset - generic ethtool sset function, handles all the details | |
229 | * @phydev: target phy_device struct | |
230 | * @cmd: ethtool_cmd | |
00db8189 AF |
231 | * |
232 | * A few notes about parameter checking: | |
233 | * - We don't set port or transceiver, so we don't care what they | |
234 | * were set to. | |
235 | * - phy_start_aneg() will make sure forced settings are sane, and | |
236 | * choose the next best ones from the ones selected, so we don't | |
b3df0da8 | 237 | * care if ethtool tries to give us bad values. |
00db8189 AF |
238 | */ |
239 | int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) | |
240 | { | |
25db0338 DD |
241 | u32 speed = ethtool_cmd_speed(cmd); |
242 | ||
00db8189 AF |
243 | if (cmd->phy_address != phydev->addr) |
244 | return -EINVAL; | |
245 | ||
246 | /* We make sure that we don't pass unsupported | |
247 | * values in to the PHY */ | |
248 | cmd->advertising &= phydev->supported; | |
249 | ||
250 | /* Verify the settings we care about. */ | |
251 | if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) | |
252 | return -EINVAL; | |
253 | ||
254 | if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) | |
255 | return -EINVAL; | |
256 | ||
8e95a202 | 257 | if (cmd->autoneg == AUTONEG_DISABLE && |
25db0338 DD |
258 | ((speed != SPEED_1000 && |
259 | speed != SPEED_100 && | |
260 | speed != SPEED_10) || | |
8e95a202 JP |
261 | (cmd->duplex != DUPLEX_HALF && |
262 | cmd->duplex != DUPLEX_FULL))) | |
00db8189 AF |
263 | return -EINVAL; |
264 | ||
265 | phydev->autoneg = cmd->autoneg; | |
266 | ||
25db0338 | 267 | phydev->speed = speed; |
00db8189 AF |
268 | |
269 | phydev->advertising = cmd->advertising; | |
270 | ||
271 | if (AUTONEG_ENABLE == cmd->autoneg) | |
272 | phydev->advertising |= ADVERTISED_Autoneg; | |
273 | else | |
274 | phydev->advertising &= ~ADVERTISED_Autoneg; | |
275 | ||
276 | phydev->duplex = cmd->duplex; | |
277 | ||
278 | /* Restart the PHY */ | |
279 | phy_start_aneg(phydev); | |
280 | ||
281 | return 0; | |
282 | } | |
9f6d55d0 | 283 | EXPORT_SYMBOL(phy_ethtool_sset); |
00db8189 AF |
284 | |
285 | int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd) | |
286 | { | |
287 | cmd->supported = phydev->supported; | |
288 | ||
289 | cmd->advertising = phydev->advertising; | |
290 | ||
70739497 | 291 | ethtool_cmd_speed_set(cmd, phydev->speed); |
00db8189 AF |
292 | cmd->duplex = phydev->duplex; |
293 | cmd->port = PORT_MII; | |
294 | cmd->phy_address = phydev->addr; | |
295 | cmd->transceiver = XCVR_EXTERNAL; | |
296 | cmd->autoneg = phydev->autoneg; | |
297 | ||
298 | return 0; | |
299 | } | |
9f6d55d0 | 300 | EXPORT_SYMBOL(phy_ethtool_gset); |
00db8189 | 301 | |
b3df0da8 RD |
302 | /** |
303 | * phy_mii_ioctl - generic PHY MII ioctl interface | |
304 | * @phydev: the phy_device struct | |
00c7d920 | 305 | * @ifr: &struct ifreq for socket ioctl's |
b3df0da8 RD |
306 | * @cmd: ioctl cmd to execute |
307 | * | |
308 | * Note that this function is currently incompatible with the | |
00db8189 | 309 | * PHYCONTROL layer. It changes registers without regard to |
b3df0da8 | 310 | * current state. Use at own risk. |
00db8189 AF |
311 | */ |
312 | int phy_mii_ioctl(struct phy_device *phydev, | |
28b04113 | 313 | struct ifreq *ifr, int cmd) |
00db8189 | 314 | { |
28b04113 | 315 | struct mii_ioctl_data *mii_data = if_mii(ifr); |
00db8189 AF |
316 | u16 val = mii_data->val_in; |
317 | ||
318 | switch (cmd) { | |
319 | case SIOCGMIIPHY: | |
320 | mii_data->phy_id = phydev->addr; | |
c6d6a511 LB |
321 | /* fall through */ |
322 | ||
00db8189 | 323 | case SIOCGMIIREG: |
af1dc13e PK |
324 | mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id, |
325 | mii_data->reg_num); | |
00db8189 AF |
326 | break; |
327 | ||
328 | case SIOCSMIIREG: | |
00db8189 AF |
329 | if (mii_data->phy_id == phydev->addr) { |
330 | switch(mii_data->reg_num) { | |
331 | case MII_BMCR: | |
163642a2 | 332 | if ((val & (BMCR_RESET|BMCR_ANENABLE)) == 0) |
00db8189 AF |
333 | phydev->autoneg = AUTONEG_DISABLE; |
334 | else | |
335 | phydev->autoneg = AUTONEG_ENABLE; | |
336 | if ((!phydev->autoneg) && (val & BMCR_FULLDPLX)) | |
337 | phydev->duplex = DUPLEX_FULL; | |
338 | else | |
339 | phydev->duplex = DUPLEX_HALF; | |
024a0a3c SL |
340 | if ((!phydev->autoneg) && |
341 | (val & BMCR_SPEED1000)) | |
342 | phydev->speed = SPEED_1000; | |
343 | else if ((!phydev->autoneg) && | |
344 | (val & BMCR_SPEED100)) | |
345 | phydev->speed = SPEED_100; | |
00db8189 AF |
346 | break; |
347 | case MII_ADVERTISE: | |
348 | phydev->advertising = val; | |
349 | break; | |
350 | default: | |
351 | /* do nothing */ | |
352 | break; | |
353 | } | |
354 | } | |
355 | ||
af1dc13e PK |
356 | mdiobus_write(phydev->bus, mii_data->phy_id, |
357 | mii_data->reg_num, val); | |
358 | ||
8e95a202 JP |
359 | if (mii_data->reg_num == MII_BMCR && |
360 | val & BMCR_RESET && | |
361 | phydev->drv->config_init) { | |
f62220d3 | 362 | phy_scan_fixups(phydev); |
00db8189 | 363 | phydev->drv->config_init(phydev); |
f62220d3 | 364 | } |
00db8189 | 365 | break; |
dda93b48 | 366 | |
c1f19b51 RC |
367 | case SIOCSHWTSTAMP: |
368 | if (phydev->drv->hwtstamp) | |
369 | return phydev->drv->hwtstamp(phydev, ifr); | |
370 | /* fall through */ | |
371 | ||
dda93b48 | 372 | default: |
c6d6a511 | 373 | return -EOPNOTSUPP; |
00db8189 AF |
374 | } |
375 | ||
376 | return 0; | |
377 | } | |
680e9fe9 | 378 | EXPORT_SYMBOL(phy_mii_ioctl); |
00db8189 | 379 | |
b3df0da8 RD |
380 | /** |
381 | * phy_start_aneg - start auto-negotiation for this PHY device | |
382 | * @phydev: the phy_device struct | |
e1393456 | 383 | * |
b3df0da8 RD |
384 | * Description: Sanitizes the settings (if we're not autonegotiating |
385 | * them), and then calls the driver's config_aneg function. | |
386 | * If the PHYCONTROL Layer is operating, we change the state to | |
387 | * reflect the beginning of Auto-negotiation or forcing. | |
e1393456 AF |
388 | */ |
389 | int phy_start_aneg(struct phy_device *phydev) | |
390 | { | |
391 | int err; | |
392 | ||
35b5f6b1 | 393 | mutex_lock(&phydev->lock); |
e1393456 AF |
394 | |
395 | if (AUTONEG_DISABLE == phydev->autoneg) | |
396 | phy_sanitize_settings(phydev); | |
397 | ||
398 | err = phydev->drv->config_aneg(phydev); | |
399 | ||
e1393456 AF |
400 | if (err < 0) |
401 | goto out_unlock; | |
402 | ||
403 | if (phydev->state != PHY_HALTED) { | |
404 | if (AUTONEG_ENABLE == phydev->autoneg) { | |
405 | phydev->state = PHY_AN; | |
406 | phydev->link_timeout = PHY_AN_TIMEOUT; | |
407 | } else { | |
408 | phydev->state = PHY_FORCING; | |
409 | phydev->link_timeout = PHY_FORCE_TIMEOUT; | |
410 | } | |
411 | } | |
412 | ||
413 | out_unlock: | |
35b5f6b1 | 414 | mutex_unlock(&phydev->lock); |
e1393456 AF |
415 | return err; |
416 | } | |
417 | EXPORT_SYMBOL(phy_start_aneg); | |
418 | ||
419 | ||
c4028958 | 420 | static void phy_change(struct work_struct *work); |
e1393456 | 421 | |
b3df0da8 RD |
422 | /** |
423 | * phy_start_machine - start PHY state machine tracking | |
424 | * @phydev: the phy_device struct | |
425 | * @handler: callback function for state change notifications | |
00db8189 | 426 | * |
b3df0da8 | 427 | * Description: The PHY infrastructure can run a state machine |
00db8189 AF |
428 | * which tracks whether the PHY is starting up, negotiating, |
429 | * etc. This function starts the timer which tracks the state | |
b3df0da8 RD |
430 | * of the PHY. If you want to be notified when the state changes, |
431 | * pass in the callback @handler, otherwise, pass NULL. If you | |
00db8189 | 432 | * want to maintain your own state machine, do not call this |
b3df0da8 RD |
433 | * function. |
434 | */ | |
00db8189 AF |
435 | void phy_start_machine(struct phy_device *phydev, |
436 | void (*handler)(struct net_device *)) | |
437 | { | |
438 | phydev->adjust_state = handler; | |
439 | ||
3664090e | 440 | schedule_delayed_work(&phydev->state_queue, HZ); |
00db8189 AF |
441 | } |
442 | ||
b3df0da8 RD |
443 | /** |
444 | * phy_stop_machine - stop the PHY state machine tracking | |
445 | * @phydev: target phy_device struct | |
00db8189 | 446 | * |
b3df0da8 | 447 | * Description: Stops the state machine timer, sets the state to UP |
817acf5e | 448 | * (unless it wasn't up yet). This function must be called BEFORE |
00db8189 AF |
449 | * phy_detach. |
450 | */ | |
451 | void phy_stop_machine(struct phy_device *phydev) | |
452 | { | |
a390d1f3 | 453 | cancel_delayed_work_sync(&phydev->state_queue); |
00db8189 | 454 | |
35b5f6b1 | 455 | mutex_lock(&phydev->lock); |
00db8189 AF |
456 | if (phydev->state > PHY_UP) |
457 | phydev->state = PHY_UP; | |
35b5f6b1 | 458 | mutex_unlock(&phydev->lock); |
00db8189 | 459 | |
00db8189 AF |
460 | phydev->adjust_state = NULL; |
461 | } | |
462 | ||
b3df0da8 RD |
463 | /** |
464 | * phy_force_reduction - reduce PHY speed/duplex settings by one step | |
465 | * @phydev: target phy_device struct | |
e1393456 | 466 | * |
b3df0da8 RD |
467 | * Description: Reduces the speed/duplex settings by one notch, |
468 | * in this order-- | |
469 | * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF. | |
470 | * The function bottoms out at 10/HALF. | |
e1393456 AF |
471 | */ |
472 | static void phy_force_reduction(struct phy_device *phydev) | |
473 | { | |
474 | int idx; | |
475 | ||
476 | idx = phy_find_setting(phydev->speed, phydev->duplex); | |
477 | ||
478 | idx++; | |
479 | ||
480 | idx = phy_find_valid(idx, phydev->supported); | |
481 | ||
482 | phydev->speed = settings[idx].speed; | |
483 | phydev->duplex = settings[idx].duplex; | |
484 | ||
485 | pr_info("Trying %d/%s\n", phydev->speed, | |
486 | DUPLEX_FULL == phydev->duplex ? | |
487 | "FULL" : "HALF"); | |
488 | } | |
489 | ||
490 | ||
b3df0da8 RD |
491 | /** |
492 | * phy_error - enter HALTED state for this PHY device | |
493 | * @phydev: target phy_device struct | |
00db8189 AF |
494 | * |
495 | * Moves the PHY to the HALTED state in response to a read | |
496 | * or write error, and tells the controller the link is down. | |
497 | * Must not be called from interrupt context, or while the | |
498 | * phydev->lock is held. | |
499 | */ | |
9b9a8bfc | 500 | static void phy_error(struct phy_device *phydev) |
00db8189 | 501 | { |
35b5f6b1 | 502 | mutex_lock(&phydev->lock); |
00db8189 | 503 | phydev->state = PHY_HALTED; |
35b5f6b1 | 504 | mutex_unlock(&phydev->lock); |
00db8189 AF |
505 | } |
506 | ||
b3df0da8 RD |
507 | /** |
508 | * phy_interrupt - PHY interrupt handler | |
509 | * @irq: interrupt line | |
510 | * @phy_dat: phy_device pointer | |
e1393456 | 511 | * |
b3df0da8 | 512 | * Description: When a PHY interrupt occurs, the handler disables |
e1393456 AF |
513 | * interrupts, and schedules a work task to clear the interrupt. |
514 | */ | |
7d12e780 | 515 | static irqreturn_t phy_interrupt(int irq, void *phy_dat) |
e1393456 AF |
516 | { |
517 | struct phy_device *phydev = phy_dat; | |
518 | ||
3c3070d7 MR |
519 | if (PHY_HALTED == phydev->state) |
520 | return IRQ_NONE; /* It can't be ours. */ | |
521 | ||
e1393456 AF |
522 | /* The MDIO bus is not allowed to be written in interrupt |
523 | * context, so we need to disable the irq here. A work | |
524 | * queue will write the PHY to disable and clear the | |
525 | * interrupt, and then reenable the irq line. */ | |
526 | disable_irq_nosync(irq); | |
0ac49527 | 527 | atomic_inc(&phydev->irq_disable); |
e1393456 AF |
528 | |
529 | schedule_work(&phydev->phy_queue); | |
530 | ||
531 | return IRQ_HANDLED; | |
532 | } | |
533 | ||
b3df0da8 RD |
534 | /** |
535 | * phy_enable_interrupts - Enable the interrupts from the PHY side | |
536 | * @phydev: target phy_device struct | |
537 | */ | |
89ff05ec | 538 | static int phy_enable_interrupts(struct phy_device *phydev) |
00db8189 AF |
539 | { |
540 | int err; | |
541 | ||
e1393456 | 542 | err = phy_clear_interrupt(phydev); |
00db8189 | 543 | |
e1393456 AF |
544 | if (err < 0) |
545 | return err; | |
00db8189 | 546 | |
e1393456 | 547 | err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); |
00db8189 AF |
548 | |
549 | return err; | |
550 | } | |
00db8189 | 551 | |
b3df0da8 RD |
552 | /** |
553 | * phy_disable_interrupts - Disable the PHY interrupts from the PHY side | |
554 | * @phydev: target phy_device struct | |
555 | */ | |
89ff05ec | 556 | static int phy_disable_interrupts(struct phy_device *phydev) |
00db8189 AF |
557 | { |
558 | int err; | |
559 | ||
560 | /* Disable PHY interrupts */ | |
561 | err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); | |
562 | ||
563 | if (err) | |
564 | goto phy_err; | |
565 | ||
566 | /* Clear the interrupt */ | |
567 | err = phy_clear_interrupt(phydev); | |
568 | ||
569 | if (err) | |
570 | goto phy_err; | |
571 | ||
572 | return 0; | |
573 | ||
574 | phy_err: | |
575 | phy_error(phydev); | |
576 | ||
577 | return err; | |
578 | } | |
e1393456 | 579 | |
b3df0da8 RD |
580 | /** |
581 | * phy_start_interrupts - request and enable interrupts for a PHY device | |
582 | * @phydev: target phy_device struct | |
e1393456 | 583 | * |
b3df0da8 RD |
584 | * Description: Request the interrupt for the given PHY. |
585 | * If this fails, then we set irq to PHY_POLL. | |
e1393456 | 586 | * Otherwise, we enable the interrupts in the PHY. |
e1393456 | 587 | * This should only be called with a valid IRQ number. |
b3df0da8 | 588 | * Returns 0 on success or < 0 on error. |
e1393456 AF |
589 | */ |
590 | int phy_start_interrupts(struct phy_device *phydev) | |
591 | { | |
592 | int err = 0; | |
593 | ||
c4028958 | 594 | INIT_WORK(&phydev->phy_queue, phy_change); |
e1393456 | 595 | |
0ac49527 | 596 | atomic_set(&phydev->irq_disable, 0); |
e1393456 | 597 | if (request_irq(phydev->irq, phy_interrupt, |
1fb9df5d | 598 | IRQF_SHARED, |
e1393456 AF |
599 | "phy_interrupt", |
600 | phydev) < 0) { | |
601 | printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n", | |
602 | phydev->bus->name, | |
603 | phydev->irq); | |
604 | phydev->irq = PHY_POLL; | |
605 | return 0; | |
606 | } | |
607 | ||
608 | err = phy_enable_interrupts(phydev); | |
609 | ||
610 | return err; | |
611 | } | |
612 | EXPORT_SYMBOL(phy_start_interrupts); | |
613 | ||
b3df0da8 RD |
614 | /** |
615 | * phy_stop_interrupts - disable interrupts from a PHY device | |
616 | * @phydev: target phy_device struct | |
617 | */ | |
e1393456 AF |
618 | int phy_stop_interrupts(struct phy_device *phydev) |
619 | { | |
620 | int err; | |
621 | ||
622 | err = phy_disable_interrupts(phydev); | |
623 | ||
624 | if (err) | |
625 | phy_error(phydev); | |
626 | ||
0ac49527 MR |
627 | free_irq(phydev->irq, phydev); |
628 | ||
3c3070d7 | 629 | /* |
0ac49527 MR |
630 | * Cannot call flush_scheduled_work() here as desired because |
631 | * of rtnl_lock(), but we do not really care about what would | |
632 | * be done, except from enable_irq(), so cancel any work | |
633 | * possibly pending and take care of the matter below. | |
3c3070d7 | 634 | */ |
28e53bdd | 635 | cancel_work_sync(&phydev->phy_queue); |
0ac49527 MR |
636 | /* |
637 | * If work indeed has been cancelled, disable_irq() will have | |
638 | * been left unbalanced from phy_interrupt() and enable_irq() | |
639 | * has to be called so that other devices on the line work. | |
640 | */ | |
641 | while (atomic_dec_return(&phydev->irq_disable) >= 0) | |
642 | enable_irq(phydev->irq); | |
e1393456 AF |
643 | |
644 | return err; | |
645 | } | |
646 | EXPORT_SYMBOL(phy_stop_interrupts); | |
647 | ||
648 | ||
b3df0da8 RD |
649 | /** |
650 | * phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes | |
651 | * @work: work_struct that describes the work to be done | |
652 | */ | |
c4028958 | 653 | static void phy_change(struct work_struct *work) |
e1393456 AF |
654 | { |
655 | int err; | |
c4028958 DH |
656 | struct phy_device *phydev = |
657 | container_of(work, struct phy_device, phy_queue); | |
e1393456 | 658 | |
a8729eb3 AG |
659 | if (phydev->drv->did_interrupt && |
660 | !phydev->drv->did_interrupt(phydev)) | |
661 | goto ignore; | |
662 | ||
e1393456 AF |
663 | err = phy_disable_interrupts(phydev); |
664 | ||
665 | if (err) | |
666 | goto phy_err; | |
667 | ||
35b5f6b1 | 668 | mutex_lock(&phydev->lock); |
e1393456 AF |
669 | if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) |
670 | phydev->state = PHY_CHANGELINK; | |
35b5f6b1 | 671 | mutex_unlock(&phydev->lock); |
e1393456 | 672 | |
0ac49527 | 673 | atomic_dec(&phydev->irq_disable); |
e1393456 AF |
674 | enable_irq(phydev->irq); |
675 | ||
676 | /* Reenable interrupts */ | |
3c3070d7 MR |
677 | if (PHY_HALTED != phydev->state) |
678 | err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); | |
e1393456 AF |
679 | |
680 | if (err) | |
681 | goto irq_enable_err; | |
682 | ||
a390d1f3 MS |
683 | /* reschedule state queue work to run as soon as possible */ |
684 | cancel_delayed_work_sync(&phydev->state_queue); | |
685 | schedule_delayed_work(&phydev->state_queue, 0); | |
0acb2839 | 686 | |
e1393456 AF |
687 | return; |
688 | ||
a8729eb3 AG |
689 | ignore: |
690 | atomic_dec(&phydev->irq_disable); | |
691 | enable_irq(phydev->irq); | |
692 | return; | |
693 | ||
e1393456 AF |
694 | irq_enable_err: |
695 | disable_irq(phydev->irq); | |
0ac49527 | 696 | atomic_inc(&phydev->irq_disable); |
e1393456 AF |
697 | phy_err: |
698 | phy_error(phydev); | |
699 | } | |
700 | ||
b3df0da8 RD |
701 | /** |
702 | * phy_stop - Bring down the PHY link, and stop checking the status | |
703 | * @phydev: target phy_device struct | |
704 | */ | |
e1393456 AF |
705 | void phy_stop(struct phy_device *phydev) |
706 | { | |
35b5f6b1 | 707 | mutex_lock(&phydev->lock); |
e1393456 AF |
708 | |
709 | if (PHY_HALTED == phydev->state) | |
710 | goto out_unlock; | |
711 | ||
3c3070d7 | 712 | if (phydev->irq != PHY_POLL) { |
e1393456 AF |
713 | /* Disable PHY Interrupts */ |
714 | phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); | |
e1393456 | 715 | |
3c3070d7 MR |
716 | /* Clear any pending interrupts */ |
717 | phy_clear_interrupt(phydev); | |
718 | } | |
e1393456 | 719 | |
6daf6531 MR |
720 | phydev->state = PHY_HALTED; |
721 | ||
e1393456 | 722 | out_unlock: |
35b5f6b1 | 723 | mutex_unlock(&phydev->lock); |
3c3070d7 MR |
724 | |
725 | /* | |
726 | * Cannot call flush_scheduled_work() here as desired because | |
727 | * of rtnl_lock(), but PHY_HALTED shall guarantee phy_change() | |
728 | * will not reenable interrupts. | |
729 | */ | |
e1393456 AF |
730 | } |
731 | ||
732 | ||
b3df0da8 RD |
733 | /** |
734 | * phy_start - start or restart a PHY device | |
735 | * @phydev: target phy_device struct | |
e1393456 | 736 | * |
b3df0da8 | 737 | * Description: Indicates the attached device's readiness to |
e1393456 AF |
738 | * handle PHY-related work. Used during startup to start the |
739 | * PHY, and after a call to phy_stop() to resume operation. | |
740 | * Also used to indicate the MDIO bus has cleared an error | |
741 | * condition. | |
742 | */ | |
743 | void phy_start(struct phy_device *phydev) | |
744 | { | |
35b5f6b1 | 745 | mutex_lock(&phydev->lock); |
e1393456 AF |
746 | |
747 | switch (phydev->state) { | |
748 | case PHY_STARTING: | |
749 | phydev->state = PHY_PENDING; | |
750 | break; | |
751 | case PHY_READY: | |
752 | phydev->state = PHY_UP; | |
753 | break; | |
754 | case PHY_HALTED: | |
755 | phydev->state = PHY_RESUMING; | |
756 | default: | |
757 | break; | |
758 | } | |
35b5f6b1 | 759 | mutex_unlock(&phydev->lock); |
e1393456 AF |
760 | } |
761 | EXPORT_SYMBOL(phy_stop); | |
762 | EXPORT_SYMBOL(phy_start); | |
67c4f3fa | 763 | |
35b5f6b1 NC |
764 | /** |
765 | * phy_state_machine - Handle the state machine | |
766 | * @work: work_struct that describes the work to be done | |
35b5f6b1 | 767 | */ |
4f9c85a1 | 768 | void phy_state_machine(struct work_struct *work) |
00db8189 | 769 | { |
bf6aede7 | 770 | struct delayed_work *dwork = to_delayed_work(work); |
35b5f6b1 | 771 | struct phy_device *phydev = |
a390d1f3 | 772 | container_of(dwork, struct phy_device, state_queue); |
00db8189 AF |
773 | int needs_aneg = 0; |
774 | int err = 0; | |
775 | ||
35b5f6b1 | 776 | mutex_lock(&phydev->lock); |
00db8189 AF |
777 | |
778 | if (phydev->adjust_state) | |
779 | phydev->adjust_state(phydev->attached_dev); | |
780 | ||
781 | switch(phydev->state) { | |
782 | case PHY_DOWN: | |
783 | case PHY_STARTING: | |
784 | case PHY_READY: | |
785 | case PHY_PENDING: | |
786 | break; | |
787 | case PHY_UP: | |
788 | needs_aneg = 1; | |
789 | ||
790 | phydev->link_timeout = PHY_AN_TIMEOUT; | |
791 | ||
792 | break; | |
793 | case PHY_AN: | |
6b655529 AF |
794 | err = phy_read_status(phydev); |
795 | ||
796 | if (err < 0) | |
797 | break; | |
798 | ||
799 | /* If the link is down, give up on | |
800 | * negotiation for now */ | |
801 | if (!phydev->link) { | |
802 | phydev->state = PHY_NOLINK; | |
803 | netif_carrier_off(phydev->attached_dev); | |
804 | phydev->adjust_link(phydev->attached_dev); | |
805 | break; | |
806 | } | |
807 | ||
00db8189 AF |
808 | /* Check if negotiation is done. Break |
809 | * if there's an error */ | |
810 | err = phy_aneg_done(phydev); | |
811 | if (err < 0) | |
812 | break; | |
813 | ||
6b655529 | 814 | /* If AN is done, we're running */ |
00db8189 | 815 | if (err > 0) { |
6b655529 AF |
816 | phydev->state = PHY_RUNNING; |
817 | netif_carrier_on(phydev->attached_dev); | |
818 | phydev->adjust_link(phydev->attached_dev); | |
00db8189 | 819 | |
6b655529 AF |
820 | } else if (0 == phydev->link_timeout--) { |
821 | int idx; | |
00db8189 | 822 | |
6b655529 AF |
823 | needs_aneg = 1; |
824 | /* If we have the magic_aneg bit, | |
825 | * we try again */ | |
826 | if (phydev->drv->flags & PHY_HAS_MAGICANEG) | |
00db8189 AF |
827 | break; |
828 | ||
6b655529 AF |
829 | /* The timer expired, and we still |
830 | * don't have a setting, so we try | |
831 | * forcing it until we find one that | |
832 | * works, starting from the fastest speed, | |
833 | * and working our way down */ | |
834 | idx = phy_find_valid(0, phydev->supported); | |
00db8189 | 835 | |
6b655529 AF |
836 | phydev->speed = settings[idx].speed; |
837 | phydev->duplex = settings[idx].duplex; | |
00db8189 | 838 | |
6b655529 | 839 | phydev->autoneg = AUTONEG_DISABLE; |
00db8189 | 840 | |
6b655529 AF |
841 | pr_info("Trying %d/%s\n", phydev->speed, |
842 | DUPLEX_FULL == | |
843 | phydev->duplex ? | |
844 | "FULL" : "HALF"); | |
00db8189 AF |
845 | } |
846 | break; | |
847 | case PHY_NOLINK: | |
848 | err = phy_read_status(phydev); | |
849 | ||
850 | if (err) | |
851 | break; | |
852 | ||
853 | if (phydev->link) { | |
854 | phydev->state = PHY_RUNNING; | |
855 | netif_carrier_on(phydev->attached_dev); | |
856 | phydev->adjust_link(phydev->attached_dev); | |
857 | } | |
858 | break; | |
859 | case PHY_FORCING: | |
6b655529 | 860 | err = genphy_update_link(phydev); |
00db8189 AF |
861 | |
862 | if (err) | |
863 | break; | |
864 | ||
865 | if (phydev->link) { | |
866 | phydev->state = PHY_RUNNING; | |
867 | netif_carrier_on(phydev->attached_dev); | |
868 | } else { | |
869 | if (0 == phydev->link_timeout--) { | |
870 | phy_force_reduction(phydev); | |
871 | needs_aneg = 1; | |
872 | } | |
873 | } | |
874 | ||
875 | phydev->adjust_link(phydev->attached_dev); | |
876 | break; | |
877 | case PHY_RUNNING: | |
878 | /* Only register a CHANGE if we are | |
879 | * polling */ | |
880 | if (PHY_POLL == phydev->irq) | |
881 | phydev->state = PHY_CHANGELINK; | |
882 | break; | |
883 | case PHY_CHANGELINK: | |
884 | err = phy_read_status(phydev); | |
885 | ||
886 | if (err) | |
887 | break; | |
888 | ||
889 | if (phydev->link) { | |
890 | phydev->state = PHY_RUNNING; | |
891 | netif_carrier_on(phydev->attached_dev); | |
892 | } else { | |
893 | phydev->state = PHY_NOLINK; | |
894 | netif_carrier_off(phydev->attached_dev); | |
895 | } | |
896 | ||
897 | phydev->adjust_link(phydev->attached_dev); | |
898 | ||
899 | if (PHY_POLL != phydev->irq) | |
900 | err = phy_config_interrupt(phydev, | |
901 | PHY_INTERRUPT_ENABLED); | |
902 | break; | |
903 | case PHY_HALTED: | |
904 | if (phydev->link) { | |
905 | phydev->link = 0; | |
906 | netif_carrier_off(phydev->attached_dev); | |
907 | phydev->adjust_link(phydev->attached_dev); | |
908 | } | |
909 | break; | |
910 | case PHY_RESUMING: | |
911 | ||
912 | err = phy_clear_interrupt(phydev); | |
913 | ||
914 | if (err) | |
915 | break; | |
916 | ||
917 | err = phy_config_interrupt(phydev, | |
918 | PHY_INTERRUPT_ENABLED); | |
919 | ||
920 | if (err) | |
921 | break; | |
922 | ||
923 | if (AUTONEG_ENABLE == phydev->autoneg) { | |
924 | err = phy_aneg_done(phydev); | |
925 | if (err < 0) | |
926 | break; | |
927 | ||
928 | /* err > 0 if AN is done. | |
929 | * Otherwise, it's 0, and we're | |
930 | * still waiting for AN */ | |
931 | if (err > 0) { | |
42caa074 WF |
932 | err = phy_read_status(phydev); |
933 | if (err) | |
934 | break; | |
935 | ||
936 | if (phydev->link) { | |
937 | phydev->state = PHY_RUNNING; | |
938 | netif_carrier_on(phydev->attached_dev); | |
939 | } else | |
940 | phydev->state = PHY_NOLINK; | |
941 | phydev->adjust_link(phydev->attached_dev); | |
00db8189 AF |
942 | } else { |
943 | phydev->state = PHY_AN; | |
944 | phydev->link_timeout = PHY_AN_TIMEOUT; | |
945 | } | |
42caa074 WF |
946 | } else { |
947 | err = phy_read_status(phydev); | |
948 | if (err) | |
949 | break; | |
950 | ||
951 | if (phydev->link) { | |
952 | phydev->state = PHY_RUNNING; | |
953 | netif_carrier_on(phydev->attached_dev); | |
954 | } else | |
955 | phydev->state = PHY_NOLINK; | |
956 | phydev->adjust_link(phydev->attached_dev); | |
957 | } | |
00db8189 AF |
958 | break; |
959 | } | |
960 | ||
35b5f6b1 | 961 | mutex_unlock(&phydev->lock); |
00db8189 AF |
962 | |
963 | if (needs_aneg) | |
964 | err = phy_start_aneg(phydev); | |
965 | ||
966 | if (err < 0) | |
967 | phy_error(phydev); | |
968 | ||
3664090e | 969 | schedule_delayed_work(&phydev->state_queue, PHY_STATE_TIME * HZ); |
35b5f6b1 | 970 | } |