]>
Commit | Line | Data |
---|---|---|
cd28ab6a SH |
1 | /* |
2 | * New driver for Marvell Yukon 2 chipset. | |
3 | * Based on earlier sk98lin, and skge driver. | |
4 | * | |
5 | * This driver intentionally does not support all the features | |
6 | * of the original driver such as link fail-over and link management because | |
7 | * those should be done at higher levels. | |
8 | * | |
9 | * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org> | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License as published by | |
798b6b19 | 13 | * the Free Software Foundation; either version 2 of the License. |
cd28ab6a SH |
14 | * |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
793b883e | 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
cd28ab6a SH |
18 | * GNU General Public License for more details. |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
23 | */ | |
24 | ||
ada1db5c JP |
25 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
26 | ||
793b883e | 27 | #include <linux/crc32.h> |
cd28ab6a | 28 | #include <linux/kernel.h> |
cd28ab6a SH |
29 | #include <linux/module.h> |
30 | #include <linux/netdevice.h> | |
d0bbccfa | 31 | #include <linux/dma-mapping.h> |
cd28ab6a SH |
32 | #include <linux/etherdevice.h> |
33 | #include <linux/ethtool.h> | |
34 | #include <linux/pci.h> | |
35 | #include <linux/ip.h> | |
5a0e3ad6 | 36 | #include <linux/slab.h> |
c9bdd4b5 | 37 | #include <net/ip.h> |
cd28ab6a SH |
38 | #include <linux/tcp.h> |
39 | #include <linux/in.h> | |
40 | #include <linux/delay.h> | |
91c86df5 | 41 | #include <linux/workqueue.h> |
d1f13708 | 42 | #include <linux/if_vlan.h> |
d70cd51a | 43 | #include <linux/prefetch.h> |
3cf26753 | 44 | #include <linux/debugfs.h> |
ef743d33 | 45 | #include <linux/mii.h> |
cd28ab6a SH |
46 | |
47 | #include <asm/irq.h> | |
48 | ||
d1f13708 SH |
49 | #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) |
50 | #define SKY2_VLAN_TAG_USED 1 | |
51 | #endif | |
52 | ||
cd28ab6a SH |
53 | #include "sky2.h" |
54 | ||
55 | #define DRV_NAME "sky2" | |
cfc0861b | 56 | #define DRV_VERSION "1.27" |
cd28ab6a SH |
57 | |
58 | /* | |
59 | * The Yukon II chipset takes 64 bit command blocks (called list elements) | |
60 | * that are organized into three (receive, transmit, status) different rings | |
14d0263f | 61 | * similar to Tigon3. |
cd28ab6a SH |
62 | */ |
63 | ||
14d0263f | 64 | #define RX_LE_SIZE 1024 |
cd28ab6a | 65 | #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) |
14d0263f | 66 | #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2) |
13210ce5 | 67 | #define RX_DEF_PENDING RX_MAX_PENDING |
793b883e | 68 | |
ee5f68fe | 69 | /* This is the worst case number of transmit list elements for a single skb: |
07e31637 SH |
70 | VLAN:GSO + CKSUM + Data + skb_frags * DMA */ |
71 | #define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1)) | |
e9c1be80 | 72 | #define TX_MIN_PENDING (MAX_SKB_TX_LE+1) |
efe91932 | 73 | #define TX_MAX_PENDING 1024 |
ee5f68fe | 74 | #define TX_DEF_PENDING 127 |
cd28ab6a | 75 | |
cd28ab6a SH |
76 | #define TX_WATCHDOG (5 * HZ) |
77 | #define NAPI_WEIGHT 64 | |
78 | #define PHY_RETRIES 1000 | |
79 | ||
f4331a6d SH |
80 | #define SKY2_EEPROM_MAGIC 0x9955aabb |
81 | ||
cb5d9547 SH |
82 | #define RING_NEXT(x,s) (((x)+1) & ((s)-1)) |
83 | ||
cd28ab6a | 84 | static const u32 default_msg = |
793b883e SH |
85 | NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK |
86 | | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR | |
3be92a70 | 87 | | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN; |
cd28ab6a | 88 | |
793b883e | 89 | static int debug = -1; /* defaults above */ |
cd28ab6a SH |
90 | module_param(debug, int, 0); |
91 | MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); | |
92 | ||
14d0263f | 93 | static int copybreak __read_mostly = 128; |
bdb5c58e SH |
94 | module_param(copybreak, int, 0); |
95 | MODULE_PARM_DESC(copybreak, "Receive copy threshold"); | |
96 | ||
fb2690a9 SH |
97 | static int disable_msi = 0; |
98 | module_param(disable_msi, int, 0); | |
99 | MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); | |
100 | ||
e6cac9ba | 101 | static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = { |
e5b74c7d SH |
102 | { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */ |
103 | { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */ | |
e30a4ac2 | 104 | { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E01) }, /* SK-9E21M */ |
2d2a3871 | 105 | { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */ |
2f4a66ad | 106 | { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */ |
508f89e7 | 107 | { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */ |
f1a0b6f5 | 108 | { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */ |
e5b74c7d SH |
109 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */ |
110 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */ | |
111 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */ | |
112 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */ | |
113 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */ | |
114 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */ | |
115 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */ | |
116 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */ | |
117 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */ | |
118 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */ | |
119 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */ | |
120 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */ | |
05745c4a | 121 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */ |
a3b4fced | 122 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */ |
e5b74c7d | 123 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */ |
5a37a68d | 124 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */ |
05745c4a | 125 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */ |
e5b74c7d SH |
126 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */ |
127 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */ | |
128 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */ | |
129 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */ | |
130 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */ | |
05745c4a | 131 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */ |
e5b74c7d SH |
132 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */ |
133 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */ | |
134 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */ | |
f1a0b6f5 SH |
135 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */ |
136 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */ | |
69161611 | 137 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */ |
5a37a68d | 138 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */ |
ed4d4161 SH |
139 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */ |
140 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */ | |
0ce8b98d | 141 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */ |
0f5aac70 | 142 | { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */ |
cd28ab6a SH |
143 | { 0 } |
144 | }; | |
793b883e | 145 | |
cd28ab6a SH |
146 | MODULE_DEVICE_TABLE(pci, sky2_id_table); |
147 | ||
148 | /* Avoid conditionals by using array */ | |
149 | static const unsigned txqaddr[] = { Q_XA1, Q_XA2 }; | |
150 | static const unsigned rxqaddr[] = { Q_R1, Q_R2 }; | |
f4ea431b | 151 | static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 }; |
cd28ab6a | 152 | |
d1b139c0 SH |
153 | static void sky2_set_multicast(struct net_device *dev); |
154 | ||
af043aa5 | 155 | /* Access to PHY via serial interconnect */ |
ef743d33 | 156 | static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) |
cd28ab6a SH |
157 | { |
158 | int i; | |
159 | ||
160 | gma_write16(hw, port, GM_SMI_DATA, val); | |
161 | gma_write16(hw, port, GM_SMI_CTRL, | |
162 | GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg)); | |
163 | ||
164 | for (i = 0; i < PHY_RETRIES; i++) { | |
af043aa5 SH |
165 | u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL); |
166 | if (ctrl == 0xffff) | |
167 | goto io_error; | |
168 | ||
169 | if (!(ctrl & GM_SMI_CT_BUSY)) | |
ef743d33 | 170 | return 0; |
af043aa5 SH |
171 | |
172 | udelay(10); | |
cd28ab6a | 173 | } |
ef743d33 | 174 | |
af043aa5 | 175 | dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name); |
ef743d33 | 176 | return -ETIMEDOUT; |
af043aa5 SH |
177 | |
178 | io_error: | |
179 | dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name); | |
180 | return -EIO; | |
cd28ab6a SH |
181 | } |
182 | ||
ef743d33 | 183 | static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val) |
cd28ab6a SH |
184 | { |
185 | int i; | |
186 | ||
793b883e | 187 | gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) |
cd28ab6a SH |
188 | | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); |
189 | ||
190 | for (i = 0; i < PHY_RETRIES; i++) { | |
af043aa5 SH |
191 | u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL); |
192 | if (ctrl == 0xffff) | |
193 | goto io_error; | |
194 | ||
195 | if (ctrl & GM_SMI_CT_RD_VAL) { | |
ef743d33 SH |
196 | *val = gma_read16(hw, port, GM_SMI_DATA); |
197 | return 0; | |
198 | } | |
199 | ||
af043aa5 | 200 | udelay(10); |
cd28ab6a SH |
201 | } |
202 | ||
af043aa5 | 203 | dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name); |
ef743d33 | 204 | return -ETIMEDOUT; |
af043aa5 SH |
205 | io_error: |
206 | dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name); | |
207 | return -EIO; | |
ef743d33 SH |
208 | } |
209 | ||
af043aa5 | 210 | static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) |
ef743d33 SH |
211 | { |
212 | u16 v; | |
af043aa5 | 213 | __gm_phy_read(hw, port, reg, &v); |
ef743d33 | 214 | return v; |
cd28ab6a SH |
215 | } |
216 | ||
5afa0a9c | 217 | |
ae306cca SH |
218 | static void sky2_power_on(struct sky2_hw *hw) |
219 | { | |
220 | /* switch power to VCC (WA for VAUX problem) */ | |
221 | sky2_write8(hw, B0_POWER_CTRL, | |
222 | PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); | |
5afa0a9c | 223 | |
ae306cca SH |
224 | /* disable Core Clock Division, */ |
225 | sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS); | |
d3bcfbeb | 226 | |
4b7c47aa | 227 | if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1) |
ae306cca SH |
228 | /* enable bits are inverted */ |
229 | sky2_write8(hw, B2_Y2_CLK_GATE, | |
230 | Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | | |
231 | Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | | |
232 | Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); | |
233 | else | |
234 | sky2_write8(hw, B2_Y2_CLK_GATE, 0); | |
977bdf06 | 235 | |
ea76e635 | 236 | if (hw->flags & SKY2_HW_ADV_POWER_CTL) { |
fc99fe06 | 237 | u32 reg; |
5afa0a9c | 238 | |
b32f40c4 | 239 | sky2_pci_write32(hw, PCI_DEV_REG3, 0); |
b2345773 | 240 | |
b32f40c4 | 241 | reg = sky2_pci_read32(hw, PCI_DEV_REG4); |
fc99fe06 SH |
242 | /* set all bits to 0 except bits 15..12 and 8 */ |
243 | reg &= P_ASPM_CONTROL_MSK; | |
b32f40c4 | 244 | sky2_pci_write32(hw, PCI_DEV_REG4, reg); |
fc99fe06 | 245 | |
b32f40c4 | 246 | reg = sky2_pci_read32(hw, PCI_DEV_REG5); |
fc99fe06 SH |
247 | /* set all bits to 0 except bits 28 & 27 */ |
248 | reg &= P_CTL_TIM_VMAIN_AV_MSK; | |
b32f40c4 | 249 | sky2_pci_write32(hw, PCI_DEV_REG5, reg); |
fc99fe06 | 250 | |
b32f40c4 | 251 | sky2_pci_write32(hw, PCI_CFG_REG_1, 0); |
8f70920f | 252 | |
5f8ae5c5 | 253 | sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON); |
254 | ||
8f70920f SH |
255 | /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */ |
256 | reg = sky2_read32(hw, B2_GP_IO); | |
257 | reg |= GLB_GPIO_STAT_RACE_DIS; | |
258 | sky2_write32(hw, B2_GP_IO, reg); | |
b2345773 SH |
259 | |
260 | sky2_read32(hw, B2_GP_IO); | |
5afa0a9c | 261 | } |
10547ae2 SH |
262 | |
263 | /* Turn on "driver loaded" LED */ | |
264 | sky2_write16(hw, B0_CTST, Y2_LED_STAT_ON); | |
ae306cca | 265 | } |
5afa0a9c | 266 | |
ae306cca SH |
267 | static void sky2_power_aux(struct sky2_hw *hw) |
268 | { | |
4b7c47aa | 269 | if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1) |
ae306cca SH |
270 | sky2_write8(hw, B2_Y2_CLK_GATE, 0); |
271 | else | |
272 | /* enable bits are inverted */ | |
273 | sky2_write8(hw, B2_Y2_CLK_GATE, | |
274 | Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | | |
275 | Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | | |
276 | Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); | |
277 | ||
c23ddf8f SH |
278 | /* switch power to VAUX if supported and PME from D3cold */ |
279 | if ( (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) && | |
280 | pci_pme_capable(hw->pdev, PCI_D3cold)) | |
ae306cca SH |
281 | sky2_write8(hw, B0_POWER_CTRL, |
282 | (PC_VAUX_ENA | PC_VCC_ENA | | |
283 | PC_VAUX_ON | PC_VCC_OFF)); | |
10547ae2 SH |
284 | |
285 | /* turn off "driver loaded LED" */ | |
286 | sky2_write16(hw, B0_CTST, Y2_LED_STAT_OFF); | |
5afa0a9c SH |
287 | } |
288 | ||
d3bcfbeb | 289 | static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port) |
cd28ab6a SH |
290 | { |
291 | u16 reg; | |
292 | ||
293 | /* disable all GMAC IRQ's */ | |
294 | sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0); | |
793b883e | 295 | |
cd28ab6a SH |
296 | gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ |
297 | gma_write16(hw, port, GM_MC_ADDR_H2, 0); | |
298 | gma_write16(hw, port, GM_MC_ADDR_H3, 0); | |
299 | gma_write16(hw, port, GM_MC_ADDR_H4, 0); | |
300 | ||
301 | reg = gma_read16(hw, port, GM_RX_CTRL); | |
302 | reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA; | |
303 | gma_write16(hw, port, GM_RX_CTRL, reg); | |
304 | } | |
305 | ||
16ad91e1 SH |
306 | /* flow control to advertise bits */ |
307 | static const u16 copper_fc_adv[] = { | |
308 | [FC_NONE] = 0, | |
309 | [FC_TX] = PHY_M_AN_ASP, | |
310 | [FC_RX] = PHY_M_AN_PC, | |
311 | [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP, | |
312 | }; | |
313 | ||
314 | /* flow control to advertise bits when using 1000BaseX */ | |
315 | static const u16 fiber_fc_adv[] = { | |
df3fe1f3 | 316 | [FC_NONE] = PHY_M_P_NO_PAUSE_X, |
16ad91e1 SH |
317 | [FC_TX] = PHY_M_P_ASYM_MD_X, |
318 | [FC_RX] = PHY_M_P_SYM_MD_X, | |
df3fe1f3 | 319 | [FC_BOTH] = PHY_M_P_BOTH_MD_X, |
16ad91e1 SH |
320 | }; |
321 | ||
322 | /* flow control to GMA disable bits */ | |
323 | static const u16 gm_fc_disable[] = { | |
324 | [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS, | |
325 | [FC_TX] = GM_GPCR_FC_RX_DIS, | |
326 | [FC_RX] = GM_GPCR_FC_TX_DIS, | |
327 | [FC_BOTH] = 0, | |
328 | }; | |
329 | ||
330 | ||
cd28ab6a SH |
331 | static void sky2_phy_init(struct sky2_hw *hw, unsigned port) |
332 | { | |
333 | struct sky2_port *sky2 = netdev_priv(hw->dev[port]); | |
2eaba1a2 | 334 | u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg; |
cd28ab6a | 335 | |
0ea065e5 | 336 | if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) && |
ea76e635 | 337 | !(hw->flags & SKY2_HW_NEWER_PHY)) { |
cd28ab6a SH |
338 | u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); |
339 | ||
340 | ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | | |
793b883e | 341 | PHY_M_EC_MAC_S_MSK); |
cd28ab6a SH |
342 | ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); |
343 | ||
53419c68 | 344 | /* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */ |
cd28ab6a | 345 | if (hw->chip_id == CHIP_ID_YUKON_EC) |
53419c68 | 346 | /* set downshift counter to 3x and enable downshift */ |
cd28ab6a SH |
347 | ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA; |
348 | else | |
53419c68 SH |
349 | /* set master & slave downshift counter to 1x */ |
350 | ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); | |
cd28ab6a SH |
351 | |
352 | gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); | |
353 | } | |
354 | ||
355 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); | |
b89165f2 | 356 | if (sky2_is_copper(hw)) { |
05745c4a | 357 | if (!(hw->flags & SKY2_HW_GIGABIT)) { |
cd28ab6a SH |
358 | /* enable automatic crossover */ |
359 | ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1; | |
6d3105d5 SH |
360 | |
361 | if (hw->chip_id == CHIP_ID_YUKON_FE_P && | |
362 | hw->chip_rev == CHIP_REV_YU_FE2_A0) { | |
363 | u16 spec; | |
364 | ||
365 | /* Enable Class A driver for FE+ A0 */ | |
366 | spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2); | |
367 | spec |= PHY_M_FESC_SEL_CL_A; | |
368 | gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec); | |
369 | } | |
cd28ab6a SH |
370 | } else { |
371 | /* disable energy detect */ | |
372 | ctrl &= ~PHY_M_PC_EN_DET_MSK; | |
373 | ||
374 | /* enable automatic crossover */ | |
375 | ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO); | |
376 | ||
53419c68 | 377 | /* downshift on PHY 88E1112 and 88E1149 is changed */ |
8e95a202 JP |
378 | if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) && |
379 | (hw->flags & SKY2_HW_NEWER_PHY)) { | |
53419c68 | 380 | /* set downshift counter to 3x and enable downshift */ |
cd28ab6a SH |
381 | ctrl &= ~PHY_M_PC_DSC_MSK; |
382 | ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA; | |
383 | } | |
384 | } | |
cd28ab6a SH |
385 | } else { |
386 | /* workaround for deviation #4.88 (CRC errors) */ | |
387 | /* disable Automatic Crossover */ | |
388 | ||
389 | ctrl &= ~PHY_M_PC_MDIX_MSK; | |
b89165f2 | 390 | } |
cd28ab6a | 391 | |
b89165f2 SH |
392 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); |
393 | ||
394 | /* special setup for PHY 88E1112 Fiber */ | |
ea76e635 | 395 | if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) { |
b89165f2 | 396 | pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); |
cd28ab6a | 397 | |
b89165f2 SH |
398 | /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */ |
399 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); | |
400 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); | |
401 | ctrl &= ~PHY_M_MAC_MD_MSK; | |
402 | ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX); | |
403 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); | |
404 | ||
405 | if (hw->pmd_type == 'P') { | |
cd28ab6a SH |
406 | /* select page 1 to access Fiber registers */ |
407 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1); | |
b89165f2 SH |
408 | |
409 | /* for SFP-module set SIGDET polarity to low */ | |
410 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); | |
411 | ctrl |= PHY_M_FIB_SIGD_POL; | |
34dd962b | 412 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); |
cd28ab6a | 413 | } |
b89165f2 SH |
414 | |
415 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); | |
cd28ab6a SH |
416 | } |
417 | ||
7800fddc | 418 | ctrl = PHY_CT_RESET; |
cd28ab6a SH |
419 | ct1000 = 0; |
420 | adv = PHY_AN_CSMA; | |
2eaba1a2 | 421 | reg = 0; |
cd28ab6a | 422 | |
0ea065e5 | 423 | if (sky2->flags & SKY2_FLAG_AUTO_SPEED) { |
b89165f2 | 424 | if (sky2_is_copper(hw)) { |
cd28ab6a SH |
425 | if (sky2->advertising & ADVERTISED_1000baseT_Full) |
426 | ct1000 |= PHY_M_1000C_AFD; | |
427 | if (sky2->advertising & ADVERTISED_1000baseT_Half) | |
428 | ct1000 |= PHY_M_1000C_AHD; | |
429 | if (sky2->advertising & ADVERTISED_100baseT_Full) | |
430 | adv |= PHY_M_AN_100_FD; | |
431 | if (sky2->advertising & ADVERTISED_100baseT_Half) | |
432 | adv |= PHY_M_AN_100_HD; | |
433 | if (sky2->advertising & ADVERTISED_10baseT_Full) | |
434 | adv |= PHY_M_AN_10_FD; | |
435 | if (sky2->advertising & ADVERTISED_10baseT_Half) | |
436 | adv |= PHY_M_AN_10_HD; | |
709c6e7b | 437 | |
b89165f2 SH |
438 | } else { /* special defines for FIBER (88E1040S only) */ |
439 | if (sky2->advertising & ADVERTISED_1000baseT_Full) | |
440 | adv |= PHY_M_AN_1000X_AFD; | |
441 | if (sky2->advertising & ADVERTISED_1000baseT_Half) | |
442 | adv |= PHY_M_AN_1000X_AHD; | |
709c6e7b | 443 | } |
cd28ab6a SH |
444 | |
445 | /* Restart Auto-negotiation */ | |
446 | ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG; | |
447 | } else { | |
448 | /* forced speed/duplex settings */ | |
449 | ct1000 = PHY_M_1000C_MSE; | |
450 | ||
0ea065e5 SH |
451 | /* Disable auto update for duplex flow control and duplex */ |
452 | reg |= GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_SPD_DIS; | |
cd28ab6a SH |
453 | |
454 | switch (sky2->speed) { | |
455 | case SPEED_1000: | |
456 | ctrl |= PHY_CT_SP1000; | |
2eaba1a2 | 457 | reg |= GM_GPCR_SPEED_1000; |
cd28ab6a SH |
458 | break; |
459 | case SPEED_100: | |
460 | ctrl |= PHY_CT_SP100; | |
2eaba1a2 | 461 | reg |= GM_GPCR_SPEED_100; |
cd28ab6a SH |
462 | break; |
463 | } | |
464 | ||
2eaba1a2 SH |
465 | if (sky2->duplex == DUPLEX_FULL) { |
466 | reg |= GM_GPCR_DUP_FULL; | |
467 | ctrl |= PHY_CT_DUP_MD; | |
16ad91e1 SH |
468 | } else if (sky2->speed < SPEED_1000) |
469 | sky2->flow_mode = FC_NONE; | |
0ea065e5 | 470 | } |
2eaba1a2 | 471 | |
0ea065e5 SH |
472 | if (sky2->flags & SKY2_FLAG_AUTO_PAUSE) { |
473 | if (sky2_is_copper(hw)) | |
474 | adv |= copper_fc_adv[sky2->flow_mode]; | |
475 | else | |
476 | adv |= fiber_fc_adv[sky2->flow_mode]; | |
477 | } else { | |
478 | reg |= GM_GPCR_AU_FCT_DIS; | |
16ad91e1 | 479 | reg |= gm_fc_disable[sky2->flow_mode]; |
2eaba1a2 SH |
480 | |
481 | /* Forward pause packets to GMAC? */ | |
16ad91e1 | 482 | if (sky2->flow_mode & FC_RX) |
2eaba1a2 SH |
483 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); |
484 | else | |
485 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); | |
cd28ab6a SH |
486 | } |
487 | ||
2eaba1a2 SH |
488 | gma_write16(hw, port, GM_GP_CTRL, reg); |
489 | ||
05745c4a | 490 | if (hw->flags & SKY2_HW_GIGABIT) |
cd28ab6a SH |
491 | gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); |
492 | ||
493 | gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); | |
494 | gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); | |
495 | ||
496 | /* Setup Phy LED's */ | |
497 | ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS); | |
498 | ledover = 0; | |
499 | ||
500 | switch (hw->chip_id) { | |
501 | case CHIP_ID_YUKON_FE: | |
502 | /* on 88E3082 these bits are at 11..9 (shifted left) */ | |
503 | ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1; | |
504 | ||
505 | ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR); | |
506 | ||
507 | /* delete ACT LED control bits */ | |
508 | ctrl &= ~PHY_M_FELP_LED1_MSK; | |
509 | /* change ACT LED control to blink mode */ | |
510 | ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL); | |
511 | gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); | |
512 | break; | |
513 | ||
05745c4a SH |
514 | case CHIP_ID_YUKON_FE_P: |
515 | /* Enable Link Partner Next Page */ | |
516 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); | |
517 | ctrl |= PHY_M_PC_ENA_LIP_NP; | |
518 | ||
519 | /* disable Energy Detect and enable scrambler */ | |
520 | ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB); | |
521 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); | |
522 | ||
523 | /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */ | |
524 | ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) | | |
525 | PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) | | |
526 | PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED); | |
527 | ||
528 | gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); | |
529 | break; | |
530 | ||
cd28ab6a | 531 | case CHIP_ID_YUKON_XL: |
793b883e | 532 | pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); |
cd28ab6a SH |
533 | |
534 | /* select page 3 to access LED control register */ | |
535 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); | |
536 | ||
537 | /* set LED Function Control register */ | |
ed6d32c7 SH |
538 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, |
539 | (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ | |
540 | PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */ | |
541 | PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */ | |
542 | PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */ | |
cd28ab6a SH |
543 | |
544 | /* set Polarity Control register */ | |
545 | gm_phy_write(hw, port, PHY_MARV_PHY_STAT, | |
793b883e SH |
546 | (PHY_M_POLC_LS1_P_MIX(4) | |
547 | PHY_M_POLC_IS0_P_MIX(4) | | |
548 | PHY_M_POLC_LOS_CTRL(2) | | |
549 | PHY_M_POLC_INIT_CTRL(2) | | |
550 | PHY_M_POLC_STA1_CTRL(2) | | |
551 | PHY_M_POLC_STA0_CTRL(2))); | |
cd28ab6a SH |
552 | |
553 | /* restore page register */ | |
793b883e | 554 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); |
cd28ab6a | 555 | break; |
93745494 | 556 | |
ed6d32c7 | 557 | case CHIP_ID_YUKON_EC_U: |
93745494 | 558 | case CHIP_ID_YUKON_EX: |
ed4d4161 | 559 | case CHIP_ID_YUKON_SUPR: |
ed6d32c7 SH |
560 | pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); |
561 | ||
562 | /* select page 3 to access LED control register */ | |
563 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); | |
564 | ||
565 | /* set LED Function Control register */ | |
566 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, | |
567 | (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ | |
568 | PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */ | |
569 | PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */ | |
570 | PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */ | |
571 | ||
572 | /* set Blink Rate in LED Timer Control Register */ | |
573 | gm_phy_write(hw, port, PHY_MARV_INT_MASK, | |
574 | ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS)); | |
575 | /* restore page register */ | |
576 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); | |
577 | break; | |
cd28ab6a SH |
578 | |
579 | default: | |
580 | /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ | |
581 | ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; | |
a84d0a3d | 582 | |
cd28ab6a | 583 | /* turn off the Rx LED (LED_RX) */ |
a84d0a3d | 584 | ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); |
cd28ab6a SH |
585 | } |
586 | ||
0ce8b98d | 587 | if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) { |
977bdf06 | 588 | /* apply fixes in PHY AFE */ |
ed6d32c7 SH |
589 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255); |
590 | ||
977bdf06 | 591 | /* increase differential signal amplitude in 10BASE-T */ |
ed6d32c7 SH |
592 | gm_phy_write(hw, port, 0x18, 0xaa99); |
593 | gm_phy_write(hw, port, 0x17, 0x2011); | |
cd28ab6a | 594 | |
0ce8b98d SH |
595 | if (hw->chip_id == CHIP_ID_YUKON_EC_U) { |
596 | /* fix for IEEE A/B Symmetry failure in 1000BASE-T */ | |
597 | gm_phy_write(hw, port, 0x18, 0xa204); | |
598 | gm_phy_write(hw, port, 0x17, 0x2002); | |
599 | } | |
977bdf06 SH |
600 | |
601 | /* set page register to 0 */ | |
9467a8fc | 602 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); |
05745c4a SH |
603 | } else if (hw->chip_id == CHIP_ID_YUKON_FE_P && |
604 | hw->chip_rev == CHIP_REV_YU_FE2_A0) { | |
605 | /* apply workaround for integrated resistors calibration */ | |
606 | gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17); | |
607 | gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60); | |
0f5aac70 SH |
608 | } else if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) { |
609 | /* apply fixes in PHY AFE */ | |
610 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff); | |
611 | ||
612 | /* apply RDAC termination workaround */ | |
613 | gm_phy_write(hw, port, 24, 0x2800); | |
614 | gm_phy_write(hw, port, 23, 0x2001); | |
615 | ||
616 | /* set page register back to 0 */ | |
617 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); | |
e1a74b37 SH |
618 | } else if (hw->chip_id != CHIP_ID_YUKON_EX && |
619 | hw->chip_id < CHIP_ID_YUKON_SUPR) { | |
05745c4a | 620 | /* no effect on Yukon-XL */ |
977bdf06 | 621 | gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); |
cd28ab6a | 622 | |
8e95a202 JP |
623 | if (!(sky2->flags & SKY2_FLAG_AUTO_SPEED) || |
624 | sky2->speed == SPEED_100) { | |
977bdf06 | 625 | /* turn on 100 Mbps LED (LED_LINK100) */ |
a84d0a3d | 626 | ledover |= PHY_M_LED_MO_100(MO_LED_ON); |
977bdf06 | 627 | } |
cd28ab6a | 628 | |
977bdf06 SH |
629 | if (ledover) |
630 | gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); | |
631 | ||
632 | } | |
2eaba1a2 | 633 | |
d571b694 | 634 | /* Enable phy interrupt on auto-negotiation complete (or link up) */ |
0ea065e5 | 635 | if (sky2->flags & SKY2_FLAG_AUTO_SPEED) |
cd28ab6a SH |
636 | gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); |
637 | else | |
638 | gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); | |
639 | } | |
640 | ||
b96936da SH |
641 | static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; |
642 | static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA }; | |
643 | ||
644 | static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port) | |
d3bcfbeb SH |
645 | { |
646 | u32 reg1; | |
d3bcfbeb | 647 | |
a40ccc68 | 648 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
b32f40c4 | 649 | reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); |
b96936da | 650 | reg1 &= ~phy_power[port]; |
d3bcfbeb | 651 | |
4b7c47aa | 652 | if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1) |
ff35164e SH |
653 | reg1 |= coma_mode[port]; |
654 | ||
b32f40c4 | 655 | sky2_pci_write32(hw, PCI_DEV_REG1, reg1); |
a40ccc68 | 656 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
82637e80 | 657 | sky2_pci_read32(hw, PCI_DEV_REG1); |
f71eb1a2 SH |
658 | |
659 | if (hw->chip_id == CHIP_ID_YUKON_FE) | |
660 | gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE); | |
661 | else if (hw->flags & SKY2_HW_ADV_POWER_CTL) | |
662 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); | |
b96936da | 663 | } |
167f53d0 | 664 | |
b96936da SH |
665 | static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port) |
666 | { | |
667 | u32 reg1; | |
db99b988 SH |
668 | u16 ctrl; |
669 | ||
670 | /* release GPHY Control reset */ | |
671 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); | |
672 | ||
673 | /* release GMAC reset */ | |
674 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); | |
675 | ||
676 | if (hw->flags & SKY2_HW_NEWER_PHY) { | |
677 | /* select page 2 to access MAC control register */ | |
678 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); | |
679 | ||
680 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); | |
681 | /* allow GMII Power Down */ | |
682 | ctrl &= ~PHY_M_MAC_GMIF_PUP; | |
683 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); | |
684 | ||
685 | /* set page register back to 0 */ | |
686 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); | |
687 | } | |
688 | ||
689 | /* setup General Purpose Control Register */ | |
690 | gma_write16(hw, port, GM_GP_CTRL, | |
0ea065e5 SH |
691 | GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 | |
692 | GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS | | |
693 | GM_GPCR_AU_SPD_DIS); | |
db99b988 SH |
694 | |
695 | if (hw->chip_id != CHIP_ID_YUKON_EC) { | |
696 | if (hw->chip_id == CHIP_ID_YUKON_EC_U) { | |
e484d5f5 RW |
697 | /* select page 2 to access MAC control register */ |
698 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); | |
db99b988 | 699 | |
e484d5f5 | 700 | ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); |
db99b988 SH |
701 | /* enable Power Down */ |
702 | ctrl |= PHY_M_PC_POW_D_ENA; | |
703 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); | |
e484d5f5 RW |
704 | |
705 | /* set page register back to 0 */ | |
706 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); | |
db99b988 SH |
707 | } |
708 | ||
709 | /* set IEEE compatible Power Down Mode (dev. #4.99) */ | |
710 | gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN); | |
711 | } | |
b96936da | 712 | |
a40ccc68 | 713 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
b96936da | 714 | reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); |
db99b988 | 715 | reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */ |
b96936da | 716 | sky2_pci_write32(hw, PCI_DEV_REG1, reg1); |
a40ccc68 | 717 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
d3bcfbeb SH |
718 | } |
719 | ||
1b537565 SH |
720 | /* Force a renegotiation */ |
721 | static void sky2_phy_reinit(struct sky2_port *sky2) | |
722 | { | |
e07b1aa8 | 723 | spin_lock_bh(&sky2->phy_lock); |
1b537565 | 724 | sky2_phy_init(sky2->hw, sky2->port); |
e07b1aa8 | 725 | spin_unlock_bh(&sky2->phy_lock); |
1b537565 SH |
726 | } |
727 | ||
e3173832 SH |
728 | /* Put device in state to listen for Wake On Lan */ |
729 | static void sky2_wol_init(struct sky2_port *sky2) | |
730 | { | |
731 | struct sky2_hw *hw = sky2->hw; | |
732 | unsigned port = sky2->port; | |
733 | enum flow_control save_mode; | |
734 | u16 ctrl; | |
e3173832 SH |
735 | |
736 | /* Bring hardware out of reset */ | |
737 | sky2_write16(hw, B0_CTST, CS_RST_CLR); | |
738 | sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR); | |
739 | ||
740 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); | |
741 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); | |
742 | ||
743 | /* Force to 10/100 | |
744 | * sky2_reset will re-enable on resume | |
745 | */ | |
746 | save_mode = sky2->flow_mode; | |
747 | ctrl = sky2->advertising; | |
748 | ||
749 | sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full); | |
750 | sky2->flow_mode = FC_NONE; | |
b96936da SH |
751 | |
752 | spin_lock_bh(&sky2->phy_lock); | |
753 | sky2_phy_power_up(hw, port); | |
754 | sky2_phy_init(hw, port); | |
755 | spin_unlock_bh(&sky2->phy_lock); | |
e3173832 SH |
756 | |
757 | sky2->flow_mode = save_mode; | |
758 | sky2->advertising = ctrl; | |
759 | ||
760 | /* Set GMAC to no flow control and auto update for speed/duplex */ | |
761 | gma_write16(hw, port, GM_GP_CTRL, | |
762 | GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA| | |
763 | GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS); | |
764 | ||
765 | /* Set WOL address */ | |
766 | memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR), | |
767 | sky2->netdev->dev_addr, ETH_ALEN); | |
768 | ||
769 | /* Turn on appropriate WOL control bits */ | |
770 | sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT); | |
771 | ctrl = 0; | |
772 | if (sky2->wol & WAKE_PHY) | |
773 | ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT; | |
774 | else | |
775 | ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT; | |
776 | ||
777 | if (sky2->wol & WAKE_MAGIC) | |
778 | ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT; | |
779 | else | |
a419aef8 | 780 | ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT; |
e3173832 SH |
781 | |
782 | ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT; | |
783 | sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl); | |
784 | ||
5f8ae5c5 | 785 | /* Disable PiG firmware */ |
786 | sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF); | |
787 | ||
e3173832 SH |
788 | /* block receiver */ |
789 | sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); | |
e3173832 SH |
790 | } |
791 | ||
69161611 SH |
792 | static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port) |
793 | { | |
05745c4a SH |
794 | struct net_device *dev = hw->dev[port]; |
795 | ||
ed4d4161 SH |
796 | if ( (hw->chip_id == CHIP_ID_YUKON_EX && |
797 | hw->chip_rev != CHIP_REV_YU_EX_A0) || | |
877c8570 | 798 | hw->chip_id >= CHIP_ID_YUKON_FE_P) { |
ed4d4161 | 799 | /* Yukon-Extreme B0 and further Extreme devices */ |
44dde56d | 800 | sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA); |
801 | } else if (dev->mtu > ETH_DATA_LEN) { | |
802 | /* set Tx GMAC FIFO Almost Empty Threshold */ | |
803 | sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), | |
804 | (ECU_JUMBO_WM << 16) | ECU_AE_THR); | |
05745c4a | 805 | |
44dde56d | 806 | sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS); |
807 | } else | |
808 | sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA); | |
69161611 SH |
809 | } |
810 | ||
cd28ab6a SH |
811 | static void sky2_mac_init(struct sky2_hw *hw, unsigned port) |
812 | { | |
813 | struct sky2_port *sky2 = netdev_priv(hw->dev[port]); | |
814 | u16 reg; | |
25cccecc | 815 | u32 rx_reg; |
cd28ab6a SH |
816 | int i; |
817 | const u8 *addr = hw->dev[port]->dev_addr; | |
818 | ||
f350339c SH |
819 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); |
820 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); | |
cd28ab6a SH |
821 | |
822 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); | |
823 | ||
4b7c47aa | 824 | if (hw->chip_id == CHIP_ID_YUKON_XL && |
825 | hw->chip_rev == CHIP_REV_YU_XL_A0 && | |
826 | port == 1) { | |
cd28ab6a SH |
827 | /* WA DEV_472 -- looks like crossed wires on port 2 */ |
828 | /* clear GMAC 1 Control reset */ | |
829 | sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR); | |
830 | do { | |
831 | sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET); | |
832 | sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR); | |
833 | } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL || | |
834 | gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 || | |
835 | gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0); | |
836 | } | |
837 | ||
793b883e | 838 | sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC)); |
cd28ab6a | 839 | |
2eaba1a2 SH |
840 | /* Enable Transmit FIFO Underrun */ |
841 | sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK); | |
842 | ||
e07b1aa8 | 843 | spin_lock_bh(&sky2->phy_lock); |
b96936da | 844 | sky2_phy_power_up(hw, port); |
cd28ab6a | 845 | sky2_phy_init(hw, port); |
e07b1aa8 | 846 | spin_unlock_bh(&sky2->phy_lock); |
cd28ab6a SH |
847 | |
848 | /* MIB clear */ | |
849 | reg = gma_read16(hw, port, GM_PHY_ADDR); | |
850 | gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); | |
851 | ||
43f2f104 SH |
852 | for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4) |
853 | gma_read16(hw, port, i); | |
cd28ab6a SH |
854 | gma_write16(hw, port, GM_PHY_ADDR, reg); |
855 | ||
856 | /* transmit control */ | |
857 | gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF)); | |
858 | ||
859 | /* receive control reg: unicast + multicast + no FCS */ | |
860 | gma_write16(hw, port, GM_RX_CTRL, | |
793b883e | 861 | GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA); |
cd28ab6a SH |
862 | |
863 | /* transmit flow control */ | |
864 | gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); | |
865 | ||
866 | /* transmit parameter */ | |
867 | gma_write16(hw, port, GM_TX_PARAM, | |
868 | TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) | | |
869 | TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) | | |
870 | TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) | | |
871 | TX_BACK_OFF_LIM(TX_BOF_LIM_DEF)); | |
872 | ||
873 | /* serial mode register */ | |
874 | reg = DATA_BLIND_VAL(DATA_BLIND_DEF) | | |
6b1a3aef | 875 | GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); |
cd28ab6a | 876 | |
6b1a3aef | 877 | if (hw->dev[port]->mtu > ETH_DATA_LEN) |
cd28ab6a SH |
878 | reg |= GM_SMOD_JUMBO_ENA; |
879 | ||
c1cd0a85 | 880 | if (hw->chip_id == CHIP_ID_YUKON_EC_U && |
881 | hw->chip_rev == CHIP_REV_YU_EC_U_B1) | |
882 | reg |= GM_NEW_FLOW_CTRL; | |
883 | ||
cd28ab6a SH |
884 | gma_write16(hw, port, GM_SERIAL_MODE, reg); |
885 | ||
cd28ab6a SH |
886 | /* virtual address for data */ |
887 | gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr); | |
888 | ||
793b883e SH |
889 | /* physical address: used for pause frames */ |
890 | gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr); | |
891 | ||
892 | /* ignore counter overflows */ | |
cd28ab6a SH |
893 | gma_write16(hw, port, GM_TX_IRQ_MSK, 0); |
894 | gma_write16(hw, port, GM_RX_IRQ_MSK, 0); | |
895 | gma_write16(hw, port, GM_TR_IRQ_MSK, 0); | |
896 | ||
897 | /* Configure Rx MAC FIFO */ | |
898 | sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); | |
25cccecc | 899 | rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON; |
05745c4a SH |
900 | if (hw->chip_id == CHIP_ID_YUKON_EX || |
901 | hw->chip_id == CHIP_ID_YUKON_FE_P) | |
25cccecc | 902 | rx_reg |= GMF_RX_OVER_ON; |
69161611 | 903 | |
25cccecc | 904 | sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg); |
cd28ab6a | 905 | |
798fdd07 SH |
906 | if (hw->chip_id == CHIP_ID_YUKON_XL) { |
907 | /* Hardware errata - clear flush mask */ | |
908 | sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0); | |
909 | } else { | |
910 | /* Flush Rx MAC FIFO on any flow control or error */ | |
911 | sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); | |
912 | } | |
cd28ab6a | 913 | |
8df9a876 | 914 | /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */ |
05745c4a SH |
915 | reg = RX_GMF_FL_THR_DEF + 1; |
916 | /* Another magic mystery workaround from sk98lin */ | |
917 | if (hw->chip_id == CHIP_ID_YUKON_FE_P && | |
918 | hw->chip_rev == CHIP_REV_YU_FE2_A0) | |
919 | reg = 0x178; | |
920 | sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg); | |
cd28ab6a SH |
921 | |
922 | /* Configure Tx MAC FIFO */ | |
923 | sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); | |
924 | sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); | |
5a5b1ea0 | 925 | |
e0c28116 | 926 | /* On chips without ram buffer, pause is controled by MAC level */ |
39dbd958 | 927 | if (!(hw->flags & SKY2_HW_RAM_BUFFER)) { |
d6b54d24 | 928 | /* Pause threshold is scaled by 8 in bytes */ |
8e95a202 JP |
929 | if (hw->chip_id == CHIP_ID_YUKON_FE_P && |
930 | hw->chip_rev == CHIP_REV_YU_FE2_A0) | |
d6b54d24 SH |
931 | reg = 1568 / 8; |
932 | else | |
933 | reg = 1024 / 8; | |
934 | sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg); | |
935 | sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8); | |
b628ed98 | 936 | |
69161611 | 937 | sky2_set_tx_stfwd(hw, port); |
5a5b1ea0 SH |
938 | } |
939 | ||
e970d1f8 SH |
940 | if (hw->chip_id == CHIP_ID_YUKON_FE_P && |
941 | hw->chip_rev == CHIP_REV_YU_FE2_A0) { | |
942 | /* disable dynamic watermark */ | |
943 | reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA)); | |
944 | reg &= ~TX_DYN_WM_ENA; | |
945 | sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg); | |
946 | } | |
cd28ab6a SH |
947 | } |
948 | ||
67712901 SH |
949 | /* Assign Ram Buffer allocation to queue */ |
950 | static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space) | |
cd28ab6a | 951 | { |
67712901 SH |
952 | u32 end; |
953 | ||
954 | /* convert from K bytes to qwords used for hw register */ | |
955 | start *= 1024/8; | |
956 | space *= 1024/8; | |
957 | end = start + space - 1; | |
793b883e | 958 | |
cd28ab6a SH |
959 | sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR); |
960 | sky2_write32(hw, RB_ADDR(q, RB_START), start); | |
961 | sky2_write32(hw, RB_ADDR(q, RB_END), end); | |
962 | sky2_write32(hw, RB_ADDR(q, RB_WP), start); | |
963 | sky2_write32(hw, RB_ADDR(q, RB_RP), start); | |
964 | ||
965 | if (q == Q_R1 || q == Q_R2) { | |
1c28f6ba | 966 | u32 tp = space - space/4; |
793b883e | 967 | |
1c28f6ba SH |
968 | /* On receive queue's set the thresholds |
969 | * give receiver priority when > 3/4 full | |
970 | * send pause when down to 2K | |
971 | */ | |
972 | sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp); | |
973 | sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2); | |
793b883e | 974 | |
1c28f6ba SH |
975 | tp = space - 2048/8; |
976 | sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp); | |
977 | sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4); | |
cd28ab6a SH |
978 | } else { |
979 | /* Enable store & forward on Tx queue's because | |
980 | * Tx FIFO is only 1K on Yukon | |
981 | */ | |
982 | sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD); | |
983 | } | |
984 | ||
985 | sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD); | |
793b883e | 986 | sky2_read8(hw, RB_ADDR(q, RB_CTRL)); |
cd28ab6a SH |
987 | } |
988 | ||
cd28ab6a | 989 | /* Setup Bus Memory Interface */ |
af4ed7e6 | 990 | static void sky2_qset(struct sky2_hw *hw, u16 q) |
cd28ab6a SH |
991 | { |
992 | sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET); | |
993 | sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT); | |
994 | sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON); | |
af4ed7e6 | 995 | sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT); |
cd28ab6a SH |
996 | } |
997 | ||
cd28ab6a SH |
998 | /* Setup prefetch unit registers. This is the interface between |
999 | * hardware and driver list elements | |
1000 | */ | |
8cc048e3 | 1001 | static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, |
d6e74b6b | 1002 | dma_addr_t addr, u32 last) |
cd28ab6a | 1003 | { |
cd28ab6a SH |
1004 | sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); |
1005 | sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR); | |
d6e74b6b SH |
1006 | sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), upper_32_bits(addr)); |
1007 | sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), lower_32_bits(addr)); | |
cd28ab6a SH |
1008 | sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last); |
1009 | sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON); | |
793b883e SH |
1010 | |
1011 | sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL)); | |
cd28ab6a SH |
1012 | } |
1013 | ||
9b289c33 | 1014 | static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot) |
793b883e | 1015 | { |
9b289c33 | 1016 | struct sky2_tx_le *le = sky2->tx_le + *slot; |
793b883e | 1017 | |
ee5f68fe | 1018 | *slot = RING_NEXT(*slot, sky2->tx_ring_size); |
291ea614 | 1019 | le->ctrl = 0; |
793b883e SH |
1020 | return le; |
1021 | } | |
cd28ab6a | 1022 | |
88f5f0ca SH |
1023 | static void tx_init(struct sky2_port *sky2) |
1024 | { | |
1025 | struct sky2_tx_le *le; | |
1026 | ||
1027 | sky2->tx_prod = sky2->tx_cons = 0; | |
1028 | sky2->tx_tcpsum = 0; | |
1029 | sky2->tx_last_mss = 0; | |
1030 | ||
9b289c33 | 1031 | le = get_tx_le(sky2, &sky2->tx_prod); |
88f5f0ca SH |
1032 | le->addr = 0; |
1033 | le->opcode = OP_ADDR64 | HW_OWNER; | |
5dce95e5 | 1034 | sky2->tx_last_upper = 0; |
88f5f0ca SH |
1035 | } |
1036 | ||
290d4de5 SH |
1037 | /* Update chip's next pointer */ |
1038 | static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx) | |
cd28ab6a | 1039 | { |
50432cb5 | 1040 | /* Make sure write' to descriptors are complete before we tell hardware */ |
762c2de2 | 1041 | wmb(); |
50432cb5 SH |
1042 | sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); |
1043 | ||
1044 | /* Synchronize I/O on since next processor may write to tail */ | |
1045 | mmiowb(); | |
cd28ab6a SH |
1046 | } |
1047 | ||
793b883e | 1048 | |
cd28ab6a SH |
1049 | static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2) |
1050 | { | |
1051 | struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put; | |
cb5d9547 | 1052 | sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE); |
291ea614 | 1053 | le->ctrl = 0; |
cd28ab6a SH |
1054 | return le; |
1055 | } | |
1056 | ||
39ef110b MM |
1057 | static unsigned sky2_get_rx_threshold(struct sky2_port* sky2) |
1058 | { | |
1059 | unsigned size; | |
1060 | ||
1061 | /* Space needed for frame data + headers rounded up */ | |
1062 | size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8); | |
1063 | ||
1064 | /* Stopping point for hardware truncation */ | |
1065 | return (size - 8) / sizeof(u32); | |
1066 | } | |
1067 | ||
1068 | static unsigned sky2_get_rx_data_size(struct sky2_port* sky2) | |
1069 | { | |
1070 | struct rx_ring_info *re; | |
1071 | unsigned size; | |
1072 | ||
1073 | /* Space needed for frame data + headers rounded up */ | |
1074 | size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8); | |
1075 | ||
1076 | sky2->rx_nfrags = size >> PAGE_SHIFT; | |
1077 | BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr)); | |
1078 | ||
1079 | /* Compute residue after pages */ | |
1080 | size -= sky2->rx_nfrags << PAGE_SHIFT; | |
1081 | ||
1082 | /* Optimize to handle small packets and headers */ | |
1083 | if (size < copybreak) | |
1084 | size = copybreak; | |
1085 | if (size < ETH_HLEN) | |
1086 | size = ETH_HLEN; | |
1087 | ||
1088 | return size; | |
1089 | } | |
1090 | ||
14d0263f SH |
1091 | /* Build description to hardware for one receive segment */ |
1092 | static void sky2_rx_add(struct sky2_port *sky2, u8 op, | |
1093 | dma_addr_t map, unsigned len) | |
cd28ab6a SH |
1094 | { |
1095 | struct sky2_rx_le *le; | |
1096 | ||
86c6887e | 1097 | if (sizeof(dma_addr_t) > sizeof(u32)) { |
cd28ab6a | 1098 | le = sky2_next_rx(sky2); |
86c6887e | 1099 | le->addr = cpu_to_le32(upper_32_bits(map)); |
cd28ab6a SH |
1100 | le->opcode = OP_ADDR64 | HW_OWNER; |
1101 | } | |
793b883e | 1102 | |
cd28ab6a | 1103 | le = sky2_next_rx(sky2); |
d6e74b6b | 1104 | le->addr = cpu_to_le32(lower_32_bits(map)); |
734d1868 | 1105 | le->length = cpu_to_le16(len); |
14d0263f | 1106 | le->opcode = op | HW_OWNER; |
cd28ab6a SH |
1107 | } |
1108 | ||
14d0263f SH |
1109 | /* Build description to hardware for one possibly fragmented skb */ |
1110 | static void sky2_rx_submit(struct sky2_port *sky2, | |
1111 | const struct rx_ring_info *re) | |
1112 | { | |
1113 | int i; | |
1114 | ||
1115 | sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size); | |
1116 | ||
1117 | for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++) | |
1118 | sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE); | |
1119 | } | |
1120 | ||
1121 | ||
454e6cb6 | 1122 | static int sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re, |
14d0263f SH |
1123 | unsigned size) |
1124 | { | |
1125 | struct sk_buff *skb = re->skb; | |
1126 | int i; | |
1127 | ||
1128 | re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE); | |
3fbd9187 | 1129 | if (pci_dma_mapping_error(pdev, re->data_addr)) |
1130 | goto mapping_error; | |
454e6cb6 | 1131 | |
7cd26ce5 | 1132 | dma_unmap_len_set(re, data_size, size); |
14d0263f | 1133 | |
3fbd9187 | 1134 | for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { |
1135 | skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; | |
1136 | ||
1137 | re->frag_addr[i] = pci_map_page(pdev, frag->page, | |
1138 | frag->page_offset, | |
1139 | frag->size, | |
14d0263f | 1140 | PCI_DMA_FROMDEVICE); |
3fbd9187 | 1141 | |
1142 | if (pci_dma_mapping_error(pdev, re->frag_addr[i])) | |
1143 | goto map_page_error; | |
1144 | } | |
454e6cb6 | 1145 | return 0; |
3fbd9187 | 1146 | |
1147 | map_page_error: | |
1148 | while (--i >= 0) { | |
1149 | pci_unmap_page(pdev, re->frag_addr[i], | |
1150 | skb_shinfo(skb)->frags[i].size, | |
1151 | PCI_DMA_FROMDEVICE); | |
1152 | } | |
1153 | ||
7cd26ce5 | 1154 | pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size), |
3fbd9187 | 1155 | PCI_DMA_FROMDEVICE); |
1156 | ||
1157 | mapping_error: | |
1158 | if (net_ratelimit()) | |
1159 | dev_warn(&pdev->dev, "%s: rx mapping error\n", | |
1160 | skb->dev->name); | |
1161 | return -EIO; | |
14d0263f SH |
1162 | } |
1163 | ||
1164 | static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re) | |
1165 | { | |
1166 | struct sk_buff *skb = re->skb; | |
1167 | int i; | |
1168 | ||
7cd26ce5 | 1169 | pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size), |
14d0263f SH |
1170 | PCI_DMA_FROMDEVICE); |
1171 | ||
1172 | for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) | |
1173 | pci_unmap_page(pdev, re->frag_addr[i], | |
1174 | skb_shinfo(skb)->frags[i].size, | |
1175 | PCI_DMA_FROMDEVICE); | |
1176 | } | |
793b883e | 1177 | |
cd28ab6a SH |
1178 | /* Tell chip where to start receive checksum. |
1179 | * Actually has two checksums, but set both same to avoid possible byte | |
1180 | * order problems. | |
1181 | */ | |
793b883e | 1182 | static void rx_set_checksum(struct sky2_port *sky2) |
cd28ab6a | 1183 | { |
ea76e635 | 1184 | struct sky2_rx_le *le = sky2_next_rx(sky2); |
793b883e | 1185 | |
ea76e635 SH |
1186 | le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN); |
1187 | le->ctrl = 0; | |
1188 | le->opcode = OP_TCPSTART | HW_OWNER; | |
cd28ab6a | 1189 | |
ea76e635 SH |
1190 | sky2_write32(sky2->hw, |
1191 | Q_ADDR(rxqaddr[sky2->port], Q_CSR), | |
0ea065e5 SH |
1192 | (sky2->flags & SKY2_FLAG_RX_CHECKSUM) |
1193 | ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); | |
cd28ab6a SH |
1194 | } |
1195 | ||
bf73130d SH |
1196 | /* Enable/disable receive hash calculation (RSS) */ |
1197 | static void rx_set_rss(struct net_device *dev) | |
1198 | { | |
1199 | struct sky2_port *sky2 = netdev_priv(dev); | |
1200 | struct sky2_hw *hw = sky2->hw; | |
1201 | int i, nkeys = 4; | |
1202 | ||
1203 | /* Supports IPv6 and other modes */ | |
1204 | if (hw->flags & SKY2_HW_NEW_LE) { | |
1205 | nkeys = 10; | |
1206 | sky2_write32(hw, SK_REG(sky2->port, RSS_CFG), HASH_ALL); | |
1207 | } | |
1208 | ||
1209 | /* Program RSS initial values */ | |
1210 | if (dev->features & NETIF_F_RXHASH) { | |
1211 | u32 key[nkeys]; | |
1212 | ||
1213 | get_random_bytes(key, nkeys * sizeof(u32)); | |
1214 | for (i = 0; i < nkeys; i++) | |
1215 | sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4), | |
1216 | key[i]); | |
1217 | ||
1218 | /* Need to turn on (undocumented) flag to make hashing work */ | |
1219 | sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), | |
1220 | RX_STFW_ENA); | |
1221 | ||
1222 | sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), | |
1223 | BMU_ENA_RX_RSS_HASH); | |
1224 | } else | |
1225 | sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), | |
1226 | BMU_DIS_RX_RSS_HASH); | |
1227 | } | |
1228 | ||
6b1a3aef SH |
1229 | /* |
1230 | * The RX Stop command will not work for Yukon-2 if the BMU does not | |
1231 | * reach the end of packet and since we can't make sure that we have | |
1232 | * incoming data, we must reset the BMU while it is not doing a DMA | |
1233 | * transfer. Since it is possible that the RX path is still active, | |
1234 | * the RX RAM buffer will be stopped first, so any possible incoming | |
1235 | * data will not trigger a DMA. After the RAM buffer is stopped, the | |
1236 | * BMU is polled until any DMA in progress is ended and only then it | |
1237 | * will be reset. | |
1238 | */ | |
1239 | static void sky2_rx_stop(struct sky2_port *sky2) | |
1240 | { | |
1241 | struct sky2_hw *hw = sky2->hw; | |
1242 | unsigned rxq = rxqaddr[sky2->port]; | |
1243 | int i; | |
1244 | ||
1245 | /* disable the RAM Buffer receive queue */ | |
1246 | sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD); | |
1247 | ||
1248 | for (i = 0; i < 0xffff; i++) | |
1249 | if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL)) | |
1250 | == sky2_read8(hw, RB_ADDR(rxq, Q_RL))) | |
1251 | goto stopped; | |
1252 | ||
ada1db5c | 1253 | netdev_warn(sky2->netdev, "receiver stop failed\n"); |
6b1a3aef SH |
1254 | stopped: |
1255 | sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST); | |
1256 | ||
1257 | /* reset the Rx prefetch unit */ | |
1258 | sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); | |
3d1454dd | 1259 | mmiowb(); |
6b1a3aef | 1260 | } |
793b883e | 1261 | |
d571b694 | 1262 | /* Clean out receive buffer area, assumes receiver hardware stopped */ |
cd28ab6a SH |
1263 | static void sky2_rx_clean(struct sky2_port *sky2) |
1264 | { | |
1265 | unsigned i; | |
1266 | ||
1267 | memset(sky2->rx_le, 0, RX_LE_BYTES); | |
793b883e | 1268 | for (i = 0; i < sky2->rx_pending; i++) { |
291ea614 | 1269 | struct rx_ring_info *re = sky2->rx_ring + i; |
cd28ab6a SH |
1270 | |
1271 | if (re->skb) { | |
14d0263f | 1272 | sky2_rx_unmap_skb(sky2->hw->pdev, re); |
cd28ab6a SH |
1273 | kfree_skb(re->skb); |
1274 | re->skb = NULL; | |
1275 | } | |
1276 | } | |
1277 | } | |
1278 | ||
ef743d33 SH |
1279 | /* Basic MII support */ |
1280 | static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | |
1281 | { | |
1282 | struct mii_ioctl_data *data = if_mii(ifr); | |
1283 | struct sky2_port *sky2 = netdev_priv(dev); | |
1284 | struct sky2_hw *hw = sky2->hw; | |
1285 | int err = -EOPNOTSUPP; | |
1286 | ||
1287 | if (!netif_running(dev)) | |
1288 | return -ENODEV; /* Phy still in reset */ | |
1289 | ||
d89e1343 | 1290 | switch (cmd) { |
ef743d33 SH |
1291 | case SIOCGMIIPHY: |
1292 | data->phy_id = PHY_ADDR_MARV; | |
1293 | ||
1294 | /* fallthru */ | |
1295 | case SIOCGMIIREG: { | |
1296 | u16 val = 0; | |
91c86df5 | 1297 | |
e07b1aa8 | 1298 | spin_lock_bh(&sky2->phy_lock); |
ef743d33 | 1299 | err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val); |
e07b1aa8 | 1300 | spin_unlock_bh(&sky2->phy_lock); |
91c86df5 | 1301 | |
ef743d33 SH |
1302 | data->val_out = val; |
1303 | break; | |
1304 | } | |
1305 | ||
1306 | case SIOCSMIIREG: | |
e07b1aa8 | 1307 | spin_lock_bh(&sky2->phy_lock); |
ef743d33 SH |
1308 | err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f, |
1309 | data->val_in); | |
e07b1aa8 | 1310 | spin_unlock_bh(&sky2->phy_lock); |
ef743d33 SH |
1311 | break; |
1312 | } | |
1313 | return err; | |
1314 | } | |
1315 | ||
d1f13708 | 1316 | #ifdef SKY2_VLAN_TAG_USED |
d494eacd | 1317 | static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff) |
d1f13708 | 1318 | { |
d494eacd | 1319 | if (onoff) { |
3d4e66f5 SH |
1320 | sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), |
1321 | RX_VLAN_STRIP_ON); | |
1322 | sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), | |
1323 | TX_VLAN_TAG_ON); | |
1324 | } else { | |
1325 | sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), | |
1326 | RX_VLAN_STRIP_OFF); | |
1327 | sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), | |
1328 | TX_VLAN_TAG_OFF); | |
1329 | } | |
d494eacd SH |
1330 | } |
1331 | ||
1332 | static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) | |
1333 | { | |
1334 | struct sky2_port *sky2 = netdev_priv(dev); | |
1335 | struct sky2_hw *hw = sky2->hw; | |
1336 | u16 port = sky2->port; | |
1337 | ||
1338 | netif_tx_lock_bh(dev); | |
1339 | napi_disable(&hw->napi); | |
1340 | ||
1341 | sky2->vlgrp = grp; | |
1342 | sky2_set_vlan_mode(hw, port, grp != NULL); | |
d1f13708 | 1343 | |
d1d08d12 | 1344 | sky2_read32(hw, B0_Y2_SP_LISR); |
bea3348e | 1345 | napi_enable(&hw->napi); |
2bb8c262 | 1346 | netif_tx_unlock_bh(dev); |
d1f13708 SH |
1347 | } |
1348 | #endif | |
1349 | ||
bd1c6869 SH |
1350 | /* Amount of required worst case padding in rx buffer */ |
1351 | static inline unsigned sky2_rx_pad(const struct sky2_hw *hw) | |
1352 | { | |
1353 | return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2; | |
1354 | } | |
1355 | ||
82788c7a | 1356 | /* |
14d0263f SH |
1357 | * Allocate an skb for receiving. If the MTU is large enough |
1358 | * make the skb non-linear with a fragment list of pages. | |
82788c7a | 1359 | */ |
14d0263f | 1360 | static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2) |
82788c7a SH |
1361 | { |
1362 | struct sk_buff *skb; | |
14d0263f | 1363 | int i; |
82788c7a | 1364 | |
724b6942 SH |
1365 | skb = netdev_alloc_skb(sky2->netdev, |
1366 | sky2->rx_data_size + sky2_rx_pad(sky2->hw)); | |
bd1c6869 SH |
1367 | if (!skb) |
1368 | goto nomem; | |
1369 | ||
39dbd958 | 1370 | if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) { |
f03b8654 SH |
1371 | unsigned char *start; |
1372 | /* | |
1373 | * Workaround for a bug in FIFO that cause hang | |
1374 | * if the FIFO if the receive buffer is not 64 byte aligned. | |
1375 | * The buffer returned from netdev_alloc_skb is | |
1376 | * aligned except if slab debugging is enabled. | |
1377 | */ | |
f03b8654 SH |
1378 | start = PTR_ALIGN(skb->data, 8); |
1379 | skb_reserve(skb, start - skb->data); | |
bd1c6869 | 1380 | } else |
f03b8654 | 1381 | skb_reserve(skb, NET_IP_ALIGN); |
14d0263f SH |
1382 | |
1383 | for (i = 0; i < sky2->rx_nfrags; i++) { | |
1384 | struct page *page = alloc_page(GFP_ATOMIC); | |
1385 | ||
1386 | if (!page) | |
1387 | goto free_partial; | |
1388 | skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE); | |
82788c7a SH |
1389 | } |
1390 | ||
1391 | return skb; | |
14d0263f SH |
1392 | free_partial: |
1393 | kfree_skb(skb); | |
1394 | nomem: | |
1395 | return NULL; | |
82788c7a SH |
1396 | } |
1397 | ||
55c9dd35 SH |
1398 | static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq) |
1399 | { | |
1400 | sky2_put_idx(sky2->hw, rxq, sky2->rx_put); | |
1401 | } | |
1402 | ||
200ac492 MM |
1403 | static int sky2_alloc_rx_skbs(struct sky2_port *sky2) |
1404 | { | |
1405 | struct sky2_hw *hw = sky2->hw; | |
1406 | unsigned i; | |
1407 | ||
1408 | sky2->rx_data_size = sky2_get_rx_data_size(sky2); | |
1409 | ||
1410 | /* Fill Rx ring */ | |
1411 | for (i = 0; i < sky2->rx_pending; i++) { | |
1412 | struct rx_ring_info *re = sky2->rx_ring + i; | |
1413 | ||
1414 | re->skb = sky2_rx_alloc(sky2); | |
1415 | if (!re->skb) | |
1416 | return -ENOMEM; | |
1417 | ||
1418 | if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) { | |
1419 | dev_kfree_skb(re->skb); | |
1420 | re->skb = NULL; | |
1421 | return -ENOMEM; | |
1422 | } | |
1423 | } | |
1424 | return 0; | |
1425 | } | |
1426 | ||
cd28ab6a | 1427 | /* |
200ac492 | 1428 | * Setup receiver buffer pool. |
14d0263f SH |
1429 | * Normal case this ends up creating one list element for skb |
1430 | * in the receive ring. Worst case if using large MTU and each | |
1431 | * allocation falls on a different 64 bit region, that results | |
1432 | * in 6 list elements per ring entry. | |
1433 | * One element is used for checksum enable/disable, and one | |
1434 | * extra to avoid wrap. | |
cd28ab6a | 1435 | */ |
200ac492 | 1436 | static void sky2_rx_start(struct sky2_port *sky2) |
cd28ab6a | 1437 | { |
6b1a3aef | 1438 | struct sky2_hw *hw = sky2->hw; |
14d0263f | 1439 | struct rx_ring_info *re; |
6b1a3aef | 1440 | unsigned rxq = rxqaddr[sky2->port]; |
39ef110b | 1441 | unsigned i, thresh; |
cd28ab6a | 1442 | |
6b1a3aef | 1443 | sky2->rx_put = sky2->rx_next = 0; |
af4ed7e6 | 1444 | sky2_qset(hw, rxq); |
977bdf06 | 1445 | |
c3905bc4 SH |
1446 | /* On PCI express lowering the watermark gives better performance */ |
1447 | if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) | |
1448 | sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX); | |
1449 | ||
1450 | /* These chips have no ram buffer? | |
1451 | * MAC Rx RAM Read is controlled by hardware */ | |
8df9a876 | 1452 | if (hw->chip_id == CHIP_ID_YUKON_EC_U && |
c1cd0a85 | 1453 | hw->chip_rev > CHIP_REV_YU_EC_U_A0) |
f449c7c1 | 1454 | sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS); |
977bdf06 | 1455 | |
6b1a3aef SH |
1456 | sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); |
1457 | ||
ea76e635 SH |
1458 | if (!(hw->flags & SKY2_HW_NEW_LE)) |
1459 | rx_set_checksum(sky2); | |
14d0263f | 1460 | |
bf73130d SH |
1461 | if (!(hw->flags & SKY2_HW_RSS_BROKEN)) |
1462 | rx_set_rss(sky2->netdev); | |
1463 | ||
200ac492 | 1464 | /* submit Rx ring */ |
793b883e | 1465 | for (i = 0; i < sky2->rx_pending; i++) { |
14d0263f | 1466 | re = sky2->rx_ring + i; |
14d0263f | 1467 | sky2_rx_submit(sky2, re); |
cd28ab6a SH |
1468 | } |
1469 | ||
a1433ac4 SH |
1470 | /* |
1471 | * The receiver hangs if it receives frames larger than the | |
1472 | * packet buffer. As a workaround, truncate oversize frames, but | |
1473 | * the register is limited to 9 bits, so if you do frames > 2052 | |
1474 | * you better get the MTU right! | |
1475 | */ | |
39ef110b | 1476 | thresh = sky2_get_rx_threshold(sky2); |
a1433ac4 SH |
1477 | if (thresh > 0x1ff) |
1478 | sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF); | |
1479 | else { | |
1480 | sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh); | |
1481 | sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON); | |
1482 | } | |
1483 | ||
6b1a3aef | 1484 | /* Tell chip about available buffers */ |
55c9dd35 | 1485 | sky2_rx_update(sky2, rxq); |
877c8570 SH |
1486 | |
1487 | if (hw->chip_id == CHIP_ID_YUKON_EX || | |
1488 | hw->chip_id == CHIP_ID_YUKON_SUPR) { | |
1489 | /* | |
1490 | * Disable flushing of non ASF packets; | |
1491 | * must be done after initializing the BMUs; | |
1492 | * drivers without ASF support should do this too, otherwise | |
1493 | * it may happen that they cannot run on ASF devices; | |
1494 | * remember that the MAC FIFO isn't reset during initialization. | |
1495 | */ | |
1496 | sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_MACSEC_FLUSH_OFF); | |
1497 | } | |
1498 | ||
1499 | if (hw->chip_id >= CHIP_ID_YUKON_SUPR) { | |
1500 | /* Enable RX Home Address & Routing Header checksum fix */ | |
1501 | sky2_write16(hw, SK_REG(sky2->port, RX_GMF_FL_CTRL), | |
1502 | RX_IPV6_SA_MOB_ENA | RX_IPV6_DA_MOB_ENA); | |
1503 | ||
1504 | /* Enable TX Home Address & Routing Header checksum fix */ | |
1505 | sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST), | |
1506 | TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN); | |
1507 | } | |
cd28ab6a SH |
1508 | } |
1509 | ||
90bbebb4 MM |
1510 | static int sky2_alloc_buffers(struct sky2_port *sky2) |
1511 | { | |
1512 | struct sky2_hw *hw = sky2->hw; | |
1513 | ||
1514 | /* must be power of 2 */ | |
1515 | sky2->tx_le = pci_alloc_consistent(hw->pdev, | |
1516 | sky2->tx_ring_size * | |
1517 | sizeof(struct sky2_tx_le), | |
1518 | &sky2->tx_le_map); | |
1519 | if (!sky2->tx_le) | |
1520 | goto nomem; | |
1521 | ||
1522 | sky2->tx_ring = kcalloc(sky2->tx_ring_size, sizeof(struct tx_ring_info), | |
1523 | GFP_KERNEL); | |
1524 | if (!sky2->tx_ring) | |
1525 | goto nomem; | |
1526 | ||
1527 | sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES, | |
1528 | &sky2->rx_le_map); | |
1529 | if (!sky2->rx_le) | |
1530 | goto nomem; | |
1531 | memset(sky2->rx_le, 0, RX_LE_BYTES); | |
1532 | ||
1533 | sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info), | |
1534 | GFP_KERNEL); | |
1535 | if (!sky2->rx_ring) | |
1536 | goto nomem; | |
1537 | ||
200ac492 | 1538 | return sky2_alloc_rx_skbs(sky2); |
90bbebb4 MM |
1539 | nomem: |
1540 | return -ENOMEM; | |
1541 | } | |
1542 | ||
1543 | static void sky2_free_buffers(struct sky2_port *sky2) | |
1544 | { | |
1545 | struct sky2_hw *hw = sky2->hw; | |
1546 | ||
200ac492 MM |
1547 | sky2_rx_clean(sky2); |
1548 | ||
90bbebb4 MM |
1549 | if (sky2->rx_le) { |
1550 | pci_free_consistent(hw->pdev, RX_LE_BYTES, | |
1551 | sky2->rx_le, sky2->rx_le_map); | |
1552 | sky2->rx_le = NULL; | |
1553 | } | |
1554 | if (sky2->tx_le) { | |
1555 | pci_free_consistent(hw->pdev, | |
1556 | sky2->tx_ring_size * sizeof(struct sky2_tx_le), | |
1557 | sky2->tx_le, sky2->tx_le_map); | |
1558 | sky2->tx_le = NULL; | |
1559 | } | |
1560 | kfree(sky2->tx_ring); | |
1561 | kfree(sky2->rx_ring); | |
1562 | ||
1563 | sky2->tx_ring = NULL; | |
1564 | sky2->rx_ring = NULL; | |
1565 | } | |
1566 | ||
ea0f71e5 | 1567 | static void sky2_hw_up(struct sky2_port *sky2) |
cd28ab6a | 1568 | { |
cd28ab6a SH |
1569 | struct sky2_hw *hw = sky2->hw; |
1570 | unsigned port = sky2->port; | |
ea0f71e5 MM |
1571 | u32 ramsize; |
1572 | int cap; | |
843a46f4 | 1573 | struct net_device *otherdev = hw->dev[sky2->port^1]; |
cd28ab6a | 1574 | |
ea0f71e5 MM |
1575 | tx_init(sky2); |
1576 | ||
ee7abb04 SH |
1577 | /* |
1578 | * On dual port PCI-X card, there is an problem where status | |
1579 | * can be received out of order due to split transactions | |
843a46f4 | 1580 | */ |
ee7abb04 SH |
1581 | if (otherdev && netif_running(otherdev) && |
1582 | (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) { | |
ee7abb04 SH |
1583 | u16 cmd; |
1584 | ||
b32f40c4 | 1585 | cmd = sky2_pci_read16(hw, cap + PCI_X_CMD); |
ee7abb04 | 1586 | cmd &= ~PCI_X_CMD_MAX_SPLIT; |
b32f40c4 | 1587 | sky2_pci_write16(hw, cap + PCI_X_CMD, cmd); |
ea0f71e5 | 1588 | } |
cd28ab6a | 1589 | |
cd28ab6a SH |
1590 | sky2_mac_init(hw, port); |
1591 | ||
e0c28116 SH |
1592 | /* Register is number of 4K blocks on internal RAM buffer. */ |
1593 | ramsize = sky2_read8(hw, B2_E_0) * 4; | |
1594 | if (ramsize > 0) { | |
67712901 | 1595 | u32 rxspace; |
cd28ab6a | 1596 | |
ada1db5c | 1597 | netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize); |
67712901 SH |
1598 | if (ramsize < 16) |
1599 | rxspace = ramsize / 2; | |
1600 | else | |
1601 | rxspace = 8 + (2*(ramsize - 16))/3; | |
cd28ab6a | 1602 | |
67712901 SH |
1603 | sky2_ramset(hw, rxqaddr[port], 0, rxspace); |
1604 | sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace); | |
1605 | ||
1606 | /* Make sure SyncQ is disabled */ | |
1607 | sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL), | |
1608 | RB_RST_SET); | |
1609 | } | |
793b883e | 1610 | |
af4ed7e6 | 1611 | sky2_qset(hw, txqaddr[port]); |
5a5b1ea0 | 1612 | |
69161611 SH |
1613 | /* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */ |
1614 | if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0) | |
1615 | sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF); | |
1616 | ||
977bdf06 | 1617 | /* Set almost empty threshold */ |
8e95a202 JP |
1618 | if (hw->chip_id == CHIP_ID_YUKON_EC_U && |
1619 | hw->chip_rev == CHIP_REV_YU_EC_U_A0) | |
b628ed98 | 1620 | sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV); |
5a5b1ea0 | 1621 | |
6b1a3aef | 1622 | sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, |
ee5f68fe | 1623 | sky2->tx_ring_size - 1); |
cd28ab6a | 1624 | |
d494eacd SH |
1625 | #ifdef SKY2_VLAN_TAG_USED |
1626 | sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL); | |
1627 | #endif | |
1628 | ||
200ac492 | 1629 | sky2_rx_start(sky2); |
ea0f71e5 MM |
1630 | } |
1631 | ||
1632 | /* Bring up network interface. */ | |
1633 | static int sky2_up(struct net_device *dev) | |
1634 | { | |
1635 | struct sky2_port *sky2 = netdev_priv(dev); | |
1636 | struct sky2_hw *hw = sky2->hw; | |
1637 | unsigned port = sky2->port; | |
1638 | u32 imask; | |
1639 | int err; | |
1640 | ||
1641 | netif_carrier_off(dev); | |
1642 | ||
1643 | err = sky2_alloc_buffers(sky2); | |
1644 | if (err) | |
1645 | goto err_out; | |
1646 | ||
1647 | sky2_hw_up(sky2); | |
cd28ab6a | 1648 | |
cd28ab6a | 1649 | /* Enable interrupts from phy/mac for port */ |
e07b1aa8 | 1650 | imask = sky2_read32(hw, B0_IMSK); |
f4ea431b | 1651 | imask |= portirq_msk[port]; |
e07b1aa8 | 1652 | sky2_write32(hw, B0_IMSK, imask); |
1fd82f3c | 1653 | sky2_read32(hw, B0_IMSK); |
e07b1aa8 | 1654 | |
6c35abae | 1655 | netif_info(sky2, ifup, dev, "enabling interface\n"); |
af18d8b8 | 1656 | |
cd28ab6a SH |
1657 | return 0; |
1658 | ||
1659 | err_out: | |
90bbebb4 | 1660 | sky2_free_buffers(sky2); |
cd28ab6a SH |
1661 | return err; |
1662 | } | |
1663 | ||
793b883e | 1664 | /* Modular subtraction in ring */ |
ee5f68fe | 1665 | static inline int tx_inuse(const struct sky2_port *sky2) |
793b883e | 1666 | { |
ee5f68fe | 1667 | return (sky2->tx_prod - sky2->tx_cons) & (sky2->tx_ring_size - 1); |
793b883e | 1668 | } |
cd28ab6a | 1669 | |
793b883e SH |
1670 | /* Number of list elements available for next tx */ |
1671 | static inline int tx_avail(const struct sky2_port *sky2) | |
cd28ab6a | 1672 | { |
ee5f68fe | 1673 | return sky2->tx_pending - tx_inuse(sky2); |
cd28ab6a SH |
1674 | } |
1675 | ||
793b883e | 1676 | /* Estimate of number of transmit list elements required */ |
28bd181a | 1677 | static unsigned tx_le_req(const struct sk_buff *skb) |
cd28ab6a | 1678 | { |
793b883e SH |
1679 | unsigned count; |
1680 | ||
07e31637 SH |
1681 | count = (skb_shinfo(skb)->nr_frags + 1) |
1682 | * (sizeof(dma_addr_t) / sizeof(u32)); | |
793b883e | 1683 | |
89114afd | 1684 | if (skb_is_gso(skb)) |
793b883e | 1685 | ++count; |
07e31637 SH |
1686 | else if (sizeof(dma_addr_t) == sizeof(u32)) |
1687 | ++count; /* possible vlan */ | |
793b883e | 1688 | |
84fa7933 | 1689 | if (skb->ip_summed == CHECKSUM_PARTIAL) |
793b883e SH |
1690 | ++count; |
1691 | ||
1692 | return count; | |
cd28ab6a SH |
1693 | } |
1694 | ||
f6815077 | 1695 | static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re) |
6b84daca SH |
1696 | { |
1697 | if (re->flags & TX_MAP_SINGLE) | |
7cd26ce5 FT |
1698 | pci_unmap_single(pdev, dma_unmap_addr(re, mapaddr), |
1699 | dma_unmap_len(re, maplen), | |
6b84daca SH |
1700 | PCI_DMA_TODEVICE); |
1701 | else if (re->flags & TX_MAP_PAGE) | |
7cd26ce5 FT |
1702 | pci_unmap_page(pdev, dma_unmap_addr(re, mapaddr), |
1703 | dma_unmap_len(re, maplen), | |
6b84daca | 1704 | PCI_DMA_TODEVICE); |
f6815077 | 1705 | re->flags = 0; |
6b84daca SH |
1706 | } |
1707 | ||
793b883e SH |
1708 | /* |
1709 | * Put one packet in ring for transmit. | |
1710 | * A single packet can generate multiple list elements, and | |
1711 | * the number of ring elements will probably be less than the number | |
1712 | * of list elements used. | |
1713 | */ | |
61357325 SH |
1714 | static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb, |
1715 | struct net_device *dev) | |
cd28ab6a SH |
1716 | { |
1717 | struct sky2_port *sky2 = netdev_priv(dev); | |
1718 | struct sky2_hw *hw = sky2->hw; | |
d1f13708 | 1719 | struct sky2_tx_le *le = NULL; |
6cdbbdf3 | 1720 | struct tx_ring_info *re; |
9b289c33 | 1721 | unsigned i, len; |
cd28ab6a | 1722 | dma_addr_t mapping; |
5dce95e5 SH |
1723 | u32 upper; |
1724 | u16 slot; | |
cd28ab6a SH |
1725 | u16 mss; |
1726 | u8 ctrl; | |
1727 | ||
2bb8c262 SH |
1728 | if (unlikely(tx_avail(sky2) < tx_le_req(skb))) |
1729 | return NETDEV_TX_BUSY; | |
cd28ab6a | 1730 | |
cd28ab6a SH |
1731 | len = skb_headlen(skb); |
1732 | mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); | |
793b883e | 1733 | |
454e6cb6 SH |
1734 | if (pci_dma_mapping_error(hw->pdev, mapping)) |
1735 | goto mapping_error; | |
1736 | ||
9b289c33 | 1737 | slot = sky2->tx_prod; |
6c35abae JP |
1738 | netif_printk(sky2, tx_queued, KERN_DEBUG, dev, |
1739 | "tx queued, slot %u, len %d\n", slot, skb->len); | |
454e6cb6 | 1740 | |
86c6887e | 1741 | /* Send high bits if needed */ |
5dce95e5 SH |
1742 | upper = upper_32_bits(mapping); |
1743 | if (upper != sky2->tx_last_upper) { | |
9b289c33 | 1744 | le = get_tx_le(sky2, &slot); |
5dce95e5 SH |
1745 | le->addr = cpu_to_le32(upper); |
1746 | sky2->tx_last_upper = upper; | |
793b883e | 1747 | le->opcode = OP_ADDR64 | HW_OWNER; |
793b883e | 1748 | } |
cd28ab6a SH |
1749 | |
1750 | /* Check for TCP Segmentation Offload */ | |
7967168c | 1751 | mss = skb_shinfo(skb)->gso_size; |
793b883e | 1752 | if (mss != 0) { |
ea76e635 SH |
1753 | |
1754 | if (!(hw->flags & SKY2_HW_NEW_LE)) | |
69161611 SH |
1755 | mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb); |
1756 | ||
1757 | if (mss != sky2->tx_last_mss) { | |
9b289c33 | 1758 | le = get_tx_le(sky2, &slot); |
69161611 | 1759 | le->addr = cpu_to_le32(mss); |
ea76e635 SH |
1760 | |
1761 | if (hw->flags & SKY2_HW_NEW_LE) | |
69161611 SH |
1762 | le->opcode = OP_MSS | HW_OWNER; |
1763 | else | |
1764 | le->opcode = OP_LRGLEN | HW_OWNER; | |
e07560cd SH |
1765 | sky2->tx_last_mss = mss; |
1766 | } | |
cd28ab6a SH |
1767 | } |
1768 | ||
cd28ab6a | 1769 | ctrl = 0; |
d1f13708 SH |
1770 | #ifdef SKY2_VLAN_TAG_USED |
1771 | /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */ | |
1772 | if (sky2->vlgrp && vlan_tx_tag_present(skb)) { | |
1773 | if (!le) { | |
9b289c33 | 1774 | le = get_tx_le(sky2, &slot); |
f65b138c | 1775 | le->addr = 0; |
d1f13708 | 1776 | le->opcode = OP_VLAN|HW_OWNER; |
d1f13708 SH |
1777 | } else |
1778 | le->opcode |= OP_VLAN; | |
1779 | le->length = cpu_to_be16(vlan_tx_tag_get(skb)); | |
1780 | ctrl |= INS_VLAN; | |
1781 | } | |
1782 | #endif | |
1783 | ||
1784 | /* Handle TCP checksum offload */ | |
84fa7933 | 1785 | if (skb->ip_summed == CHECKSUM_PARTIAL) { |
69161611 | 1786 | /* On Yukon EX (some versions) encoding change. */ |
ea76e635 | 1787 | if (hw->flags & SKY2_HW_AUTO_TX_SUM) |
69161611 SH |
1788 | ctrl |= CALSUM; /* auto checksum */ |
1789 | else { | |
1790 | const unsigned offset = skb_transport_offset(skb); | |
1791 | u32 tcpsum; | |
1792 | ||
1793 | tcpsum = offset << 16; /* sum start */ | |
1794 | tcpsum |= offset + skb->csum_offset; /* sum write */ | |
1795 | ||
1796 | ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; | |
1797 | if (ip_hdr(skb)->protocol == IPPROTO_UDP) | |
1798 | ctrl |= UDPTCP; | |
1799 | ||
1800 | if (tcpsum != sky2->tx_tcpsum) { | |
1801 | sky2->tx_tcpsum = tcpsum; | |
1802 | ||
9b289c33 | 1803 | le = get_tx_le(sky2, &slot); |
69161611 SH |
1804 | le->addr = cpu_to_le32(tcpsum); |
1805 | le->length = 0; /* initial checksum value */ | |
1806 | le->ctrl = 1; /* one packet */ | |
1807 | le->opcode = OP_TCPLISW | HW_OWNER; | |
1808 | } | |
1d179332 | 1809 | } |
cd28ab6a SH |
1810 | } |
1811 | ||
6b84daca SH |
1812 | re = sky2->tx_ring + slot; |
1813 | re->flags = TX_MAP_SINGLE; | |
7cd26ce5 FT |
1814 | dma_unmap_addr_set(re, mapaddr, mapping); |
1815 | dma_unmap_len_set(re, maplen, len); | |
6b84daca | 1816 | |
9b289c33 | 1817 | le = get_tx_le(sky2, &slot); |
d6e74b6b | 1818 | le->addr = cpu_to_le32(lower_32_bits(mapping)); |
cd28ab6a SH |
1819 | le->length = cpu_to_le16(len); |
1820 | le->ctrl = ctrl; | |
793b883e | 1821 | le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER); |
cd28ab6a | 1822 | |
cd28ab6a SH |
1823 | |
1824 | for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { | |
291ea614 | 1825 | const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; |
cd28ab6a SH |
1826 | |
1827 | mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset, | |
1828 | frag->size, PCI_DMA_TODEVICE); | |
86c6887e | 1829 | |
454e6cb6 SH |
1830 | if (pci_dma_mapping_error(hw->pdev, mapping)) |
1831 | goto mapping_unwind; | |
1832 | ||
5dce95e5 SH |
1833 | upper = upper_32_bits(mapping); |
1834 | if (upper != sky2->tx_last_upper) { | |
9b289c33 | 1835 | le = get_tx_le(sky2, &slot); |
5dce95e5 SH |
1836 | le->addr = cpu_to_le32(upper); |
1837 | sky2->tx_last_upper = upper; | |
793b883e | 1838 | le->opcode = OP_ADDR64 | HW_OWNER; |
cd28ab6a SH |
1839 | } |
1840 | ||
6b84daca SH |
1841 | re = sky2->tx_ring + slot; |
1842 | re->flags = TX_MAP_PAGE; | |
7cd26ce5 FT |
1843 | dma_unmap_addr_set(re, mapaddr, mapping); |
1844 | dma_unmap_len_set(re, maplen, frag->size); | |
6b84daca | 1845 | |
9b289c33 | 1846 | le = get_tx_le(sky2, &slot); |
d6e74b6b | 1847 | le->addr = cpu_to_le32(lower_32_bits(mapping)); |
cd28ab6a SH |
1848 | le->length = cpu_to_le16(frag->size); |
1849 | le->ctrl = ctrl; | |
793b883e | 1850 | le->opcode = OP_BUFFER | HW_OWNER; |
cd28ab6a | 1851 | } |
6cdbbdf3 | 1852 | |
6b84daca | 1853 | re->skb = skb; |
cd28ab6a SH |
1854 | le->ctrl |= EOP; |
1855 | ||
9b289c33 MM |
1856 | sky2->tx_prod = slot; |
1857 | ||
97bda706 SH |
1858 | if (tx_avail(sky2) <= MAX_SKB_TX_LE) |
1859 | netif_stop_queue(dev); | |
b19666d9 | 1860 | |
290d4de5 | 1861 | sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod); |
cd28ab6a | 1862 | |
cd28ab6a | 1863 | return NETDEV_TX_OK; |
454e6cb6 SH |
1864 | |
1865 | mapping_unwind: | |
ee5f68fe | 1866 | for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, sky2->tx_ring_size)) { |
454e6cb6 SH |
1867 | re = sky2->tx_ring + i; |
1868 | ||
6b84daca | 1869 | sky2_tx_unmap(hw->pdev, re); |
454e6cb6 SH |
1870 | } |
1871 | ||
454e6cb6 SH |
1872 | mapping_error: |
1873 | if (net_ratelimit()) | |
1874 | dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name); | |
1875 | dev_kfree_skb(skb); | |
1876 | return NETDEV_TX_OK; | |
cd28ab6a SH |
1877 | } |
1878 | ||
cd28ab6a | 1879 | /* |
793b883e SH |
1880 | * Free ring elements from starting at tx_cons until "done" |
1881 | * | |
481cea4a SH |
1882 | * NB: |
1883 | * 1. The hardware will tell us about partial completion of multi-part | |
291ea614 | 1884 | * buffers so make sure not to free skb to early. |
481cea4a SH |
1885 | * 2. This may run in parallel start_xmit because the it only |
1886 | * looks at the tail of the queue of FIFO (tx_cons), not | |
1887 | * the head (tx_prod) | |
cd28ab6a | 1888 | */ |
d11c13e7 | 1889 | static void sky2_tx_complete(struct sky2_port *sky2, u16 done) |
cd28ab6a | 1890 | { |
d11c13e7 | 1891 | struct net_device *dev = sky2->netdev; |
291ea614 | 1892 | unsigned idx; |
cd28ab6a | 1893 | |
ee5f68fe | 1894 | BUG_ON(done >= sky2->tx_ring_size); |
2224795d | 1895 | |
291ea614 | 1896 | for (idx = sky2->tx_cons; idx != done; |
ee5f68fe | 1897 | idx = RING_NEXT(idx, sky2->tx_ring_size)) { |
291ea614 | 1898 | struct tx_ring_info *re = sky2->tx_ring + idx; |
6b84daca | 1899 | struct sk_buff *skb = re->skb; |
291ea614 | 1900 | |
6b84daca | 1901 | sky2_tx_unmap(sky2->hw->pdev, re); |
bd1c6869 | 1902 | |
6b84daca | 1903 | if (skb) { |
6c35abae JP |
1904 | netif_printk(sky2, tx_done, KERN_DEBUG, dev, |
1905 | "tx done %u\n", idx); | |
3cf26753 | 1906 | |
7138a0f5 | 1907 | dev->stats.tx_packets++; |
bd1c6869 SH |
1908 | dev->stats.tx_bytes += skb->len; |
1909 | ||
f6815077 | 1910 | re->skb = NULL; |
724b6942 | 1911 | dev_kfree_skb_any(skb); |
2bf56fe2 | 1912 | |
ee5f68fe | 1913 | sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size); |
cd28ab6a | 1914 | } |
793b883e | 1915 | } |
793b883e | 1916 | |
291ea614 | 1917 | sky2->tx_cons = idx; |
50432cb5 | 1918 | smp_mb(); |
cd28ab6a SH |
1919 | } |
1920 | ||
264bb4fa | 1921 | static void sky2_tx_reset(struct sky2_hw *hw, unsigned port) |
a510996b | 1922 | { |
a510996b MM |
1923 | /* Disable Force Sync bit and Enable Alloc bit */ |
1924 | sky2_write8(hw, SK_REG(port, TXA_CTRL), | |
1925 | TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); | |
1926 | ||
1927 | /* Stop Interval Timer and Limit Counter of Tx Arbiter */ | |
1928 | sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L); | |
1929 | sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L); | |
1930 | ||
1931 | /* Reset the PCI FIFO of the async Tx queue */ | |
1932 | sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), | |
1933 | BMU_RST_SET | BMU_FIFO_RST); | |
1934 | ||
1935 | /* Reset the Tx prefetch units */ | |
1936 | sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL), | |
1937 | PREF_UNIT_RST_SET); | |
1938 | ||
1939 | sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET); | |
1940 | sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); | |
1941 | } | |
1942 | ||
f2b31cb3 | 1943 | static void sky2_hw_down(struct sky2_port *sky2) |
cd28ab6a | 1944 | { |
cd28ab6a SH |
1945 | struct sky2_hw *hw = sky2->hw; |
1946 | unsigned port = sky2->port; | |
f2b31cb3 | 1947 | u16 ctrl; |
cd28ab6a | 1948 | |
d104acaf SH |
1949 | /* Force flow control off */ |
1950 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); | |
793b883e | 1951 | |
cd28ab6a SH |
1952 | /* Stop transmitter */ |
1953 | sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP); | |
1954 | sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR)); | |
1955 | ||
1956 | sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), | |
793b883e | 1957 | RB_RST_SET | RB_DIS_OP_MD); |
cd28ab6a SH |
1958 | |
1959 | ctrl = gma_read16(hw, port, GM_GP_CTRL); | |
793b883e | 1960 | ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA); |
cd28ab6a SH |
1961 | gma_write16(hw, port, GM_GP_CTRL, ctrl); |
1962 | ||
1963 | sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); | |
1964 | ||
1965 | /* Workaround shared GMAC reset */ | |
8e95a202 JP |
1966 | if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && |
1967 | port == 0 && hw->dev[1] && netif_running(hw->dev[1]))) | |
cd28ab6a SH |
1968 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET); |
1969 | ||
cd28ab6a | 1970 | sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); |
cd28ab6a | 1971 | |
6c83504f SH |
1972 | /* Force any delayed status interrrupt and NAPI */ |
1973 | sky2_write32(hw, STAT_LEV_TIMER_CNT, 0); | |
1974 | sky2_write32(hw, STAT_TX_TIMER_CNT, 0); | |
1975 | sky2_write32(hw, STAT_ISR_TIMER_CNT, 0); | |
1976 | sky2_read8(hw, STAT_ISR_TIMER_CTRL); | |
1977 | ||
a947a39d MM |
1978 | sky2_rx_stop(sky2); |
1979 | ||
0da6d7b3 | 1980 | spin_lock_bh(&sky2->phy_lock); |
b96936da | 1981 | sky2_phy_power_down(hw, port); |
0da6d7b3 | 1982 | spin_unlock_bh(&sky2->phy_lock); |
d3bcfbeb | 1983 | |
264bb4fa MM |
1984 | sky2_tx_reset(hw, port); |
1985 | ||
481cea4a SH |
1986 | /* Free any pending frames stuck in HW queue */ |
1987 | sky2_tx_complete(sky2, sky2->tx_prod); | |
f2b31cb3 MM |
1988 | } |
1989 | ||
1990 | /* Network shutdown */ | |
1991 | static int sky2_down(struct net_device *dev) | |
1992 | { | |
1993 | struct sky2_port *sky2 = netdev_priv(dev); | |
8a0c9228 | 1994 | struct sky2_hw *hw = sky2->hw; |
f2b31cb3 MM |
1995 | |
1996 | /* Never really got started! */ | |
1997 | if (!sky2->tx_le) | |
1998 | return 0; | |
1999 | ||
6c35abae | 2000 | netif_info(sky2, ifdown, dev, "disabling interface\n"); |
f2b31cb3 | 2001 | |
8a0c9228 MM |
2002 | /* Disable port IRQ */ |
2003 | sky2_write32(hw, B0_IMSK, | |
2004 | sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]); | |
2005 | sky2_read32(hw, B0_IMSK); | |
2006 | ||
2007 | synchronize_irq(hw->pdev->irq); | |
2008 | napi_synchronize(&hw->napi); | |
2009 | ||
f2b31cb3 | 2010 | sky2_hw_down(sky2); |
481cea4a | 2011 | |
90bbebb4 | 2012 | sky2_free_buffers(sky2); |
1b537565 | 2013 | |
cd28ab6a SH |
2014 | return 0; |
2015 | } | |
2016 | ||
2017 | static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) | |
2018 | { | |
ea76e635 | 2019 | if (hw->flags & SKY2_HW_FIBRE_PHY) |
793b883e SH |
2020 | return SPEED_1000; |
2021 | ||
05745c4a SH |
2022 | if (!(hw->flags & SKY2_HW_GIGABIT)) { |
2023 | if (aux & PHY_M_PS_SPEED_100) | |
2024 | return SPEED_100; | |
2025 | else | |
2026 | return SPEED_10; | |
2027 | } | |
cd28ab6a SH |
2028 | |
2029 | switch (aux & PHY_M_PS_SPEED_MSK) { | |
2030 | case PHY_M_PS_SPEED_1000: | |
2031 | return SPEED_1000; | |
2032 | case PHY_M_PS_SPEED_100: | |
2033 | return SPEED_100; | |
2034 | default: | |
2035 | return SPEED_10; | |
2036 | } | |
2037 | } | |
2038 | ||
2039 | static void sky2_link_up(struct sky2_port *sky2) | |
2040 | { | |
2041 | struct sky2_hw *hw = sky2->hw; | |
2042 | unsigned port = sky2->port; | |
2043 | u16 reg; | |
16ad91e1 SH |
2044 | static const char *fc_name[] = { |
2045 | [FC_NONE] = "none", | |
2046 | [FC_TX] = "tx", | |
2047 | [FC_RX] = "rx", | |
2048 | [FC_BOTH] = "both", | |
2049 | }; | |
cd28ab6a | 2050 | |
cd28ab6a | 2051 | /* enable Rx/Tx */ |
2eaba1a2 | 2052 | reg = gma_read16(hw, port, GM_GP_CTRL); |
cd28ab6a SH |
2053 | reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; |
2054 | gma_write16(hw, port, GM_GP_CTRL, reg); | |
cd28ab6a SH |
2055 | |
2056 | gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); | |
2057 | ||
2058 | netif_carrier_on(sky2->netdev); | |
cd28ab6a | 2059 | |
75e80683 | 2060 | mod_timer(&hw->watchdog_timer, jiffies + 1); |
32c2c300 | 2061 | |
cd28ab6a | 2062 | /* Turn on link LED */ |
793b883e | 2063 | sky2_write8(hw, SK_REG(port, LNK_LED_REG), |
cd28ab6a SH |
2064 | LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); |
2065 | ||
6c35abae JP |
2066 | netif_info(sky2, link, sky2->netdev, |
2067 | "Link is up at %d Mbps, %s duplex, flow control %s\n", | |
2068 | sky2->speed, | |
2069 | sky2->duplex == DUPLEX_FULL ? "full" : "half", | |
2070 | fc_name[sky2->flow_status]); | |
cd28ab6a SH |
2071 | } |
2072 | ||
2073 | static void sky2_link_down(struct sky2_port *sky2) | |
2074 | { | |
2075 | struct sky2_hw *hw = sky2->hw; | |
2076 | unsigned port = sky2->port; | |
2077 | u16 reg; | |
2078 | ||
2079 | gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); | |
2080 | ||
2081 | reg = gma_read16(hw, port, GM_GP_CTRL); | |
2082 | reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); | |
2083 | gma_write16(hw, port, GM_GP_CTRL, reg); | |
cd28ab6a | 2084 | |
cd28ab6a | 2085 | netif_carrier_off(sky2->netdev); |
cd28ab6a | 2086 | |
809aaaae | 2087 | /* Turn off link LED */ |
cd28ab6a SH |
2088 | sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); |
2089 | ||
6c35abae | 2090 | netif_info(sky2, link, sky2->netdev, "Link is down\n"); |
2eaba1a2 | 2091 | |
cd28ab6a SH |
2092 | sky2_phy_init(hw, port); |
2093 | } | |
2094 | ||
16ad91e1 SH |
2095 | static enum flow_control sky2_flow(int rx, int tx) |
2096 | { | |
2097 | if (rx) | |
2098 | return tx ? FC_BOTH : FC_RX; | |
2099 | else | |
2100 | return tx ? FC_TX : FC_NONE; | |
2101 | } | |
2102 | ||
793b883e SH |
2103 | static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) |
2104 | { | |
2105 | struct sky2_hw *hw = sky2->hw; | |
2106 | unsigned port = sky2->port; | |
da4c1ff4 | 2107 | u16 advert, lpa; |
793b883e | 2108 | |
da4c1ff4 | 2109 | advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV); |
793b883e | 2110 | lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP); |
793b883e | 2111 | if (lpa & PHY_M_AN_RF) { |
ada1db5c | 2112 | netdev_err(sky2->netdev, "remote fault\n"); |
793b883e SH |
2113 | return -1; |
2114 | } | |
2115 | ||
793b883e | 2116 | if (!(aux & PHY_M_PS_SPDUP_RES)) { |
ada1db5c | 2117 | netdev_err(sky2->netdev, "speed/duplex mismatch\n"); |
793b883e SH |
2118 | return -1; |
2119 | } | |
2120 | ||
793b883e | 2121 | sky2->speed = sky2_phy_speed(hw, aux); |
7c74ac1c | 2122 | sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; |
793b883e | 2123 | |
da4c1ff4 SH |
2124 | /* Since the pause result bits seem to in different positions on |
2125 | * different chips. look at registers. | |
2126 | */ | |
ea76e635 | 2127 | if (hw->flags & SKY2_HW_FIBRE_PHY) { |
da4c1ff4 SH |
2128 | /* Shift for bits in fiber PHY */ |
2129 | advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM); | |
2130 | lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM); | |
2131 | ||
2132 | if (advert & ADVERTISE_1000XPAUSE) | |
2133 | advert |= ADVERTISE_PAUSE_CAP; | |
2134 | if (advert & ADVERTISE_1000XPSE_ASYM) | |
2135 | advert |= ADVERTISE_PAUSE_ASYM; | |
2136 | if (lpa & LPA_1000XPAUSE) | |
2137 | lpa |= LPA_PAUSE_CAP; | |
2138 | if (lpa & LPA_1000XPAUSE_ASYM) | |
2139 | lpa |= LPA_PAUSE_ASYM; | |
2140 | } | |
793b883e | 2141 | |
da4c1ff4 SH |
2142 | sky2->flow_status = FC_NONE; |
2143 | if (advert & ADVERTISE_PAUSE_CAP) { | |
2144 | if (lpa & LPA_PAUSE_CAP) | |
2145 | sky2->flow_status = FC_BOTH; | |
2146 | else if (advert & ADVERTISE_PAUSE_ASYM) | |
2147 | sky2->flow_status = FC_RX; | |
2148 | } else if (advert & ADVERTISE_PAUSE_ASYM) { | |
2149 | if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM)) | |
2150 | sky2->flow_status = FC_TX; | |
2151 | } | |
793b883e | 2152 | |
8e95a202 JP |
2153 | if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 && |
2154 | !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX)) | |
16ad91e1 | 2155 | sky2->flow_status = FC_NONE; |
2eaba1a2 | 2156 | |
da4c1ff4 | 2157 | if (sky2->flow_status & FC_TX) |
793b883e SH |
2158 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); |
2159 | else | |
2160 | sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); | |
2161 | ||
2162 | return 0; | |
2163 | } | |
cd28ab6a | 2164 | |
e07b1aa8 SH |
2165 | /* Interrupt from PHY */ |
2166 | static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) | |
cd28ab6a | 2167 | { |
e07b1aa8 SH |
2168 | struct net_device *dev = hw->dev[port]; |
2169 | struct sky2_port *sky2 = netdev_priv(dev); | |
cd28ab6a SH |
2170 | u16 istatus, phystat; |
2171 | ||
ebc646f6 SH |
2172 | if (!netif_running(dev)) |
2173 | return; | |
2174 | ||
e07b1aa8 SH |
2175 | spin_lock(&sky2->phy_lock); |
2176 | istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT); | |
2177 | phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT); | |
2178 | ||
6c35abae JP |
2179 | netif_info(sky2, intr, sky2->netdev, "phy interrupt status 0x%x 0x%x\n", |
2180 | istatus, phystat); | |
cd28ab6a | 2181 | |
0ea065e5 | 2182 | if (istatus & PHY_M_IS_AN_COMPL) { |
9badba25 | 2183 | if (sky2_autoneg_done(sky2, phystat) == 0 && |
2184 | !netif_carrier_ok(dev)) | |
793b883e SH |
2185 | sky2_link_up(sky2); |
2186 | goto out; | |
2187 | } | |
cd28ab6a | 2188 | |
793b883e SH |
2189 | if (istatus & PHY_M_IS_LSP_CHANGE) |
2190 | sky2->speed = sky2_phy_speed(hw, phystat); | |
cd28ab6a | 2191 | |
793b883e SH |
2192 | if (istatus & PHY_M_IS_DUP_CHANGE) |
2193 | sky2->duplex = | |
2194 | (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; | |
cd28ab6a | 2195 | |
793b883e SH |
2196 | if (istatus & PHY_M_IS_LST_CHANGE) { |
2197 | if (phystat & PHY_M_PS_LINK_UP) | |
cd28ab6a | 2198 | sky2_link_up(sky2); |
793b883e SH |
2199 | else |
2200 | sky2_link_down(sky2); | |
cd28ab6a | 2201 | } |
793b883e | 2202 | out: |
e07b1aa8 | 2203 | spin_unlock(&sky2->phy_lock); |
cd28ab6a SH |
2204 | } |
2205 | ||
0f5aac70 SH |
2206 | /* Special quick link interrupt (Yukon-2 Optima only) */ |
2207 | static void sky2_qlink_intr(struct sky2_hw *hw) | |
2208 | { | |
2209 | struct sky2_port *sky2 = netdev_priv(hw->dev[0]); | |
2210 | u32 imask; | |
2211 | u16 phy; | |
2212 | ||
2213 | /* disable irq */ | |
2214 | imask = sky2_read32(hw, B0_IMSK); | |
2215 | imask &= ~Y2_IS_PHY_QLNK; | |
2216 | sky2_write32(hw, B0_IMSK, imask); | |
2217 | ||
2218 | /* reset PHY Link Detect */ | |
2219 | phy = sky2_pci_read16(hw, PSM_CONFIG_REG4); | |
a40ccc68 | 2220 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
0f5aac70 | 2221 | sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1); |
a40ccc68 | 2222 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
0f5aac70 SH |
2223 | |
2224 | sky2_link_up(sky2); | |
2225 | } | |
2226 | ||
62335ab0 | 2227 | /* Transmit timeout is only called if we are running, carrier is up |
302d1252 SH |
2228 | * and tx queue is full (stopped). |
2229 | */ | |
cd28ab6a SH |
2230 | static void sky2_tx_timeout(struct net_device *dev) |
2231 | { | |
2232 | struct sky2_port *sky2 = netdev_priv(dev); | |
8cc048e3 | 2233 | struct sky2_hw *hw = sky2->hw; |
cd28ab6a | 2234 | |
6c35abae | 2235 | netif_err(sky2, timer, dev, "tx timeout\n"); |
cd28ab6a | 2236 | |
ada1db5c JP |
2237 | netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n", |
2238 | sky2->tx_cons, sky2->tx_prod, | |
2239 | sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX), | |
2240 | sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE))); | |
8f24664d | 2241 | |
81906791 SH |
2242 | /* can't restart safely under softirq */ |
2243 | schedule_work(&hw->restart_work); | |
cd28ab6a SH |
2244 | } |
2245 | ||
2246 | static int sky2_change_mtu(struct net_device *dev, int new_mtu) | |
2247 | { | |
6b1a3aef SH |
2248 | struct sky2_port *sky2 = netdev_priv(dev); |
2249 | struct sky2_hw *hw = sky2->hw; | |
b628ed98 | 2250 | unsigned port = sky2->port; |
6b1a3aef SH |
2251 | int err; |
2252 | u16 ctl, mode; | |
e07b1aa8 | 2253 | u32 imask; |
cd28ab6a | 2254 | |
44dde56d | 2255 | /* MTU size outside the spec */ |
cd28ab6a SH |
2256 | if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) |
2257 | return -EINVAL; | |
2258 | ||
44dde56d | 2259 | /* MTU > 1500 on yukon FE and FE+ not allowed */ |
05745c4a SH |
2260 | if (new_mtu > ETH_DATA_LEN && |
2261 | (hw->chip_id == CHIP_ID_YUKON_FE || | |
2262 | hw->chip_id == CHIP_ID_YUKON_FE_P)) | |
d2adf4f6 SH |
2263 | return -EINVAL; |
2264 | ||
44dde56d | 2265 | /* TSO, etc on Yukon Ultra and MTU > 1500 not supported */ |
2266 | if (new_mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U) | |
2267 | dev->features &= ~(NETIF_F_TSO|NETIF_F_SG|NETIF_F_ALL_CSUM); | |
2268 | ||
6b1a3aef SH |
2269 | if (!netif_running(dev)) { |
2270 | dev->mtu = new_mtu; | |
2271 | return 0; | |
2272 | } | |
2273 | ||
e07b1aa8 | 2274 | imask = sky2_read32(hw, B0_IMSK); |
6b1a3aef SH |
2275 | sky2_write32(hw, B0_IMSK, 0); |
2276 | ||
018d1c66 | 2277 | dev->trans_start = jiffies; /* prevent tx timeout */ |
bea3348e | 2278 | napi_disable(&hw->napi); |
df01093b | 2279 | netif_tx_disable(dev); |
018d1c66 | 2280 | |
e07b1aa8 SH |
2281 | synchronize_irq(hw->pdev->irq); |
2282 | ||
39dbd958 | 2283 | if (!(hw->flags & SKY2_HW_RAM_BUFFER)) |
69161611 | 2284 | sky2_set_tx_stfwd(hw, port); |
b628ed98 SH |
2285 | |
2286 | ctl = gma_read16(hw, port, GM_GP_CTRL); | |
2287 | gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA); | |
6b1a3aef SH |
2288 | sky2_rx_stop(sky2); |
2289 | sky2_rx_clean(sky2); | |
cd28ab6a SH |
2290 | |
2291 | dev->mtu = new_mtu; | |
14d0263f | 2292 | |
6b1a3aef SH |
2293 | mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | |
2294 | GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); | |
2295 | ||
2296 | if (dev->mtu > ETH_DATA_LEN) | |
2297 | mode |= GM_SMOD_JUMBO_ENA; | |
2298 | ||
b628ed98 | 2299 | gma_write16(hw, port, GM_SERIAL_MODE, mode); |
cd28ab6a | 2300 | |
b628ed98 | 2301 | sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD); |
cd28ab6a | 2302 | |
200ac492 MM |
2303 | err = sky2_alloc_rx_skbs(sky2); |
2304 | if (!err) | |
2305 | sky2_rx_start(sky2); | |
2306 | else | |
2307 | sky2_rx_clean(sky2); | |
e07b1aa8 | 2308 | sky2_write32(hw, B0_IMSK, imask); |
018d1c66 | 2309 | |
d1d08d12 | 2310 | sky2_read32(hw, B0_Y2_SP_LISR); |
bea3348e SH |
2311 | napi_enable(&hw->napi); |
2312 | ||
1b537565 SH |
2313 | if (err) |
2314 | dev_close(dev); | |
2315 | else { | |
b628ed98 | 2316 | gma_write16(hw, port, GM_GP_CTRL, ctl); |
1b537565 | 2317 | |
1b537565 SH |
2318 | netif_wake_queue(dev); |
2319 | } | |
2320 | ||
cd28ab6a SH |
2321 | return err; |
2322 | } | |
2323 | ||
14d0263f SH |
2324 | /* For small just reuse existing skb for next receive */ |
2325 | static struct sk_buff *receive_copy(struct sky2_port *sky2, | |
2326 | const struct rx_ring_info *re, | |
2327 | unsigned length) | |
2328 | { | |
2329 | struct sk_buff *skb; | |
2330 | ||
89d71a66 | 2331 | skb = netdev_alloc_skb_ip_align(sky2->netdev, length); |
14d0263f | 2332 | if (likely(skb)) { |
14d0263f SH |
2333 | pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr, |
2334 | length, PCI_DMA_FROMDEVICE); | |
d626f62b | 2335 | skb_copy_from_linear_data(re->skb, skb->data, length); |
14d0263f SH |
2336 | skb->ip_summed = re->skb->ip_summed; |
2337 | skb->csum = re->skb->csum; | |
2338 | pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, | |
2339 | length, PCI_DMA_FROMDEVICE); | |
2340 | re->skb->ip_summed = CHECKSUM_NONE; | |
489b10c1 | 2341 | skb_put(skb, length); |
14d0263f SH |
2342 | } |
2343 | return skb; | |
2344 | } | |
2345 | ||
2346 | /* Adjust length of skb with fragments to match received data */ | |
2347 | static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space, | |
2348 | unsigned int length) | |
2349 | { | |
2350 | int i, num_frags; | |
2351 | unsigned int size; | |
2352 | ||
2353 | /* put header into skb */ | |
2354 | size = min(length, hdr_space); | |
2355 | skb->tail += size; | |
2356 | skb->len += size; | |
2357 | length -= size; | |
2358 | ||
2359 | num_frags = skb_shinfo(skb)->nr_frags; | |
2360 | for (i = 0; i < num_frags; i++) { | |
2361 | skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; | |
2362 | ||
2363 | if (length == 0) { | |
2364 | /* don't need this page */ | |
2365 | __free_page(frag->page); | |
2366 | --skb_shinfo(skb)->nr_frags; | |
2367 | } else { | |
2368 | size = min(length, (unsigned) PAGE_SIZE); | |
2369 | ||
2370 | frag->size = size; | |
2371 | skb->data_len += size; | |
2372 | skb->truesize += size; | |
2373 | skb->len += size; | |
2374 | length -= size; | |
2375 | } | |
2376 | } | |
2377 | } | |
2378 | ||
2379 | /* Normal packet - take skb from ring element and put in a new one */ | |
2380 | static struct sk_buff *receive_new(struct sky2_port *sky2, | |
2381 | struct rx_ring_info *re, | |
2382 | unsigned int length) | |
2383 | { | |
3fbd9187 | 2384 | struct sk_buff *skb; |
2385 | struct rx_ring_info nre; | |
14d0263f SH |
2386 | unsigned hdr_space = sky2->rx_data_size; |
2387 | ||
3fbd9187 | 2388 | nre.skb = sky2_rx_alloc(sky2); |
2389 | if (unlikely(!nre.skb)) | |
2390 | goto nobuf; | |
2391 | ||
2392 | if (sky2_rx_map_skb(sky2->hw->pdev, &nre, hdr_space)) | |
2393 | goto nomap; | |
14d0263f SH |
2394 | |
2395 | skb = re->skb; | |
2396 | sky2_rx_unmap_skb(sky2->hw->pdev, re); | |
14d0263f | 2397 | prefetch(skb->data); |
3fbd9187 | 2398 | *re = nre; |
14d0263f SH |
2399 | |
2400 | if (skb_shinfo(skb)->nr_frags) | |
2401 | skb_put_frags(skb, hdr_space, length); | |
2402 | else | |
489b10c1 | 2403 | skb_put(skb, length); |
14d0263f | 2404 | return skb; |
3fbd9187 | 2405 | |
2406 | nomap: | |
2407 | dev_kfree_skb(nre.skb); | |
2408 | nobuf: | |
2409 | return NULL; | |
14d0263f SH |
2410 | } |
2411 | ||
cd28ab6a SH |
2412 | /* |
2413 | * Receive one packet. | |
d571b694 | 2414 | * For larger packets, get new buffer. |
cd28ab6a | 2415 | */ |
497d7c86 | 2416 | static struct sk_buff *sky2_receive(struct net_device *dev, |
cd28ab6a SH |
2417 | u16 length, u32 status) |
2418 | { | |
497d7c86 | 2419 | struct sky2_port *sky2 = netdev_priv(dev); |
291ea614 | 2420 | struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next; |
79e57d32 | 2421 | struct sk_buff *skb = NULL; |
d6532232 SH |
2422 | u16 count = (status & GMR_FS_LEN) >> 16; |
2423 | ||
2424 | #ifdef SKY2_VLAN_TAG_USED | |
2425 | /* Account for vlan tag */ | |
2426 | if (sky2->vlgrp && (status & GMR_FS_VLAN)) | |
2427 | count -= VLAN_HLEN; | |
2428 | #endif | |
cd28ab6a | 2429 | |
6c35abae JP |
2430 | netif_printk(sky2, rx_status, KERN_DEBUG, dev, |
2431 | "rx slot %u status 0x%x len %d\n", | |
2432 | sky2->rx_next, status, length); | |
cd28ab6a | 2433 | |
793b883e | 2434 | sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; |
d70cd51a | 2435 | prefetch(sky2->rx_ring + sky2->rx_next); |
cd28ab6a | 2436 | |
3b12e014 SH |
2437 | /* This chip has hardware problems that generates bogus status. |
2438 | * So do only marginal checking and expect higher level protocols | |
2439 | * to handle crap frames. | |
2440 | */ | |
2441 | if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P && | |
2442 | sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 && | |
2443 | length != count) | |
2444 | goto okay; | |
2445 | ||
42eeea01 | 2446 | if (status & GMR_FS_ANY_ERR) |
cd28ab6a SH |
2447 | goto error; |
2448 | ||
42eeea01 SH |
2449 | if (!(status & GMR_FS_RX_OK)) |
2450 | goto resubmit; | |
2451 | ||
d6532232 SH |
2452 | /* if length reported by DMA does not match PHY, packet was truncated */ |
2453 | if (length != count) | |
3b12e014 | 2454 | goto len_error; |
71749531 | 2455 | |
3b12e014 | 2456 | okay: |
14d0263f SH |
2457 | if (length < copybreak) |
2458 | skb = receive_copy(sky2, re, length); | |
2459 | else | |
2460 | skb = receive_new(sky2, re, length); | |
90c30335 SH |
2461 | |
2462 | dev->stats.rx_dropped += (skb == NULL); | |
2463 | ||
793b883e | 2464 | resubmit: |
14d0263f | 2465 | sky2_rx_submit(sky2, re); |
79e57d32 | 2466 | |
cd28ab6a SH |
2467 | return skb; |
2468 | ||
3b12e014 | 2469 | len_error: |
71749531 SH |
2470 | /* Truncation of overlength packets |
2471 | causes PHY length to not match MAC length */ | |
7138a0f5 | 2472 | ++dev->stats.rx_length_errors; |
6c35abae JP |
2473 | if (net_ratelimit()) |
2474 | netif_info(sky2, rx_err, dev, | |
2475 | "rx length error: status %#x length %d\n", | |
2476 | status, length); | |
d6532232 | 2477 | goto resubmit; |
71749531 | 2478 | |
cd28ab6a | 2479 | error: |
7138a0f5 | 2480 | ++dev->stats.rx_errors; |
b6d77734 | 2481 | if (status & GMR_FS_RX_FF_OV) { |
7138a0f5 | 2482 | dev->stats.rx_over_errors++; |
b6d77734 SH |
2483 | goto resubmit; |
2484 | } | |
6e15b712 | 2485 | |
6c35abae JP |
2486 | if (net_ratelimit()) |
2487 | netif_info(sky2, rx_err, dev, | |
2488 | "rx error, status 0x%x length %d\n", status, length); | |
793b883e SH |
2489 | |
2490 | if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE)) | |
7138a0f5 | 2491 | dev->stats.rx_length_errors++; |
cd28ab6a | 2492 | if (status & GMR_FS_FRAGMENT) |
7138a0f5 | 2493 | dev->stats.rx_frame_errors++; |
cd28ab6a | 2494 | if (status & GMR_FS_CRC_ERR) |
7138a0f5 | 2495 | dev->stats.rx_crc_errors++; |
79e57d32 | 2496 | |
793b883e | 2497 | goto resubmit; |
cd28ab6a SH |
2498 | } |
2499 | ||
e07b1aa8 SH |
2500 | /* Transmit complete */ |
2501 | static inline void sky2_tx_done(struct net_device *dev, u16 last) | |
13b97b74 | 2502 | { |
e07b1aa8 | 2503 | struct sky2_port *sky2 = netdev_priv(dev); |
302d1252 | 2504 | |
8a0c9228 | 2505 | if (netif_running(dev)) { |
e07b1aa8 | 2506 | sky2_tx_complete(sky2, last); |
8a0c9228 MM |
2507 | |
2508 | /* Wake unless it's detached, and called e.g. from sky2_down() */ | |
2509 | if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) | |
2510 | netif_wake_queue(dev); | |
2511 | } | |
cd28ab6a SH |
2512 | } |
2513 | ||
37e5a243 SH |
2514 | static inline void sky2_skb_rx(const struct sky2_port *sky2, |
2515 | u32 status, struct sk_buff *skb) | |
2516 | { | |
2517 | #ifdef SKY2_VLAN_TAG_USED | |
2518 | u16 vlan_tag = be16_to_cpu(sky2->rx_tag); | |
2519 | if (sky2->vlgrp && (status & GMR_FS_VLAN)) { | |
2520 | if (skb->ip_summed == CHECKSUM_NONE) | |
2521 | vlan_hwaccel_receive_skb(skb, sky2->vlgrp, vlan_tag); | |
2522 | else | |
2523 | vlan_gro_receive(&sky2->hw->napi, sky2->vlgrp, | |
2524 | vlan_tag, skb); | |
2525 | return; | |
2526 | } | |
2527 | #endif | |
2528 | if (skb->ip_summed == CHECKSUM_NONE) | |
2529 | netif_receive_skb(skb); | |
2530 | else | |
2531 | napi_gro_receive(&sky2->hw->napi, skb); | |
2532 | } | |
2533 | ||
bf15fe99 SH |
2534 | static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port, |
2535 | unsigned packets, unsigned bytes) | |
2536 | { | |
2537 | if (packets) { | |
2538 | struct net_device *dev = hw->dev[port]; | |
2539 | ||
2540 | dev->stats.rx_packets += packets; | |
2541 | dev->stats.rx_bytes += bytes; | |
2542 | dev->last_rx = jiffies; | |
2543 | sky2_rx_update(netdev_priv(dev), rxqaddr[port]); | |
2544 | } | |
2545 | } | |
2546 | ||
375c5688 | 2547 | static void sky2_rx_checksum(struct sky2_port *sky2, u32 status) |
2548 | { | |
2549 | /* If this happens then driver assuming wrong format for chip type */ | |
2550 | BUG_ON(sky2->hw->flags & SKY2_HW_NEW_LE); | |
2551 | ||
2552 | /* Both checksum counters are programmed to start at | |
2553 | * the same offset, so unless there is a problem they | |
2554 | * should match. This failure is an early indication that | |
2555 | * hardware receive checksumming won't work. | |
2556 | */ | |
2557 | if (likely((u16)(status >> 16) == (u16)status)) { | |
2558 | struct sk_buff *skb = sky2->rx_ring[sky2->rx_next].skb; | |
2559 | skb->ip_summed = CHECKSUM_COMPLETE; | |
2560 | skb->csum = le16_to_cpu(status); | |
2561 | } else { | |
2562 | dev_notice(&sky2->hw->pdev->dev, | |
2563 | "%s: receive checksum problem (status = %#x)\n", | |
2564 | sky2->netdev->name, status); | |
2565 | ||
2566 | /* Disable checksum offload */ | |
2567 | sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM; | |
2568 | sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), | |
2569 | BMU_DIS_RX_CHKSUM); | |
2570 | } | |
2571 | } | |
2572 | ||
bf73130d SH |
2573 | static void sky2_rx_hash(struct sky2_port *sky2, u32 status) |
2574 | { | |
2575 | struct sk_buff *skb; | |
2576 | ||
2577 | skb = sky2->rx_ring[sky2->rx_next].skb; | |
2578 | skb->rxhash = le32_to_cpu(status); | |
2579 | } | |
2580 | ||
e07b1aa8 | 2581 | /* Process status response ring */ |
26691830 | 2582 | static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) |
cd28ab6a | 2583 | { |
e07b1aa8 | 2584 | int work_done = 0; |
bf15fe99 SH |
2585 | unsigned int total_bytes[2] = { 0 }; |
2586 | unsigned int total_packets[2] = { 0 }; | |
a8fd6266 | 2587 | |
af2a58ac | 2588 | rmb(); |
26691830 | 2589 | do { |
55c9dd35 | 2590 | struct sky2_port *sky2; |
13210ce5 | 2591 | struct sky2_status_le *le = hw->st_le + hw->st_idx; |
ab5adecb | 2592 | unsigned port; |
13210ce5 | 2593 | struct net_device *dev; |
cd28ab6a | 2594 | struct sk_buff *skb; |
cd28ab6a SH |
2595 | u32 status; |
2596 | u16 length; | |
ab5adecb SH |
2597 | u8 opcode = le->opcode; |
2598 | ||
2599 | if (!(opcode & HW_OWNER)) | |
2600 | break; | |
cd28ab6a | 2601 | |
efe91932 | 2602 | hw->st_idx = RING_NEXT(hw->st_idx, hw->st_size); |
bea86103 | 2603 | |
ab5adecb | 2604 | port = le->css & CSS_LINK_BIT; |
69161611 | 2605 | dev = hw->dev[port]; |
13210ce5 | 2606 | sky2 = netdev_priv(dev); |
f65b138c SH |
2607 | length = le16_to_cpu(le->length); |
2608 | status = le32_to_cpu(le->status); | |
cd28ab6a | 2609 | |
ab5adecb SH |
2610 | le->opcode = 0; |
2611 | switch (opcode & ~HW_OWNER) { | |
cd28ab6a | 2612 | case OP_RXSTAT: |
bf15fe99 SH |
2613 | total_packets[port]++; |
2614 | total_bytes[port] += length; | |
90c30335 | 2615 | |
497d7c86 | 2616 | skb = sky2_receive(dev, length, status); |
90c30335 | 2617 | if (!skb) |
55c9dd35 | 2618 | break; |
13210ce5 | 2619 | |
69161611 | 2620 | /* This chip reports checksum status differently */ |
05745c4a | 2621 | if (hw->flags & SKY2_HW_NEW_LE) { |
0ea065e5 | 2622 | if ((sky2->flags & SKY2_FLAG_RX_CHECKSUM) && |
69161611 SH |
2623 | (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) && |
2624 | (le->css & CSS_TCPUDPCSOK)) | |
2625 | skb->ip_summed = CHECKSUM_UNNECESSARY; | |
2626 | else | |
2627 | skb->ip_summed = CHECKSUM_NONE; | |
2628 | } | |
2629 | ||
13210ce5 | 2630 | skb->protocol = eth_type_trans(skb, dev); |
13210ce5 | 2631 | |
37e5a243 | 2632 | sky2_skb_rx(sky2, status, skb); |
13210ce5 | 2633 | |
22e11703 | 2634 | /* Stop after net poll weight */ |
13210ce5 SH |
2635 | if (++work_done >= to_do) |
2636 | goto exit_loop; | |
cd28ab6a SH |
2637 | break; |
2638 | ||
d1f13708 SH |
2639 | #ifdef SKY2_VLAN_TAG_USED |
2640 | case OP_RXVLAN: | |
2641 | sky2->rx_tag = length; | |
2642 | break; | |
2643 | ||
2644 | case OP_RXCHKSVLAN: | |
2645 | sky2->rx_tag = length; | |
2646 | /* fall through */ | |
2647 | #endif | |
cd28ab6a | 2648 | case OP_RXCHKS: |
375c5688 | 2649 | if (likely(sky2->flags & SKY2_FLAG_RX_CHECKSUM)) |
2650 | sky2_rx_checksum(sky2, status); | |
cd28ab6a SH |
2651 | break; |
2652 | ||
bf73130d SH |
2653 | case OP_RSS_HASH: |
2654 | sky2_rx_hash(sky2, status); | |
2655 | break; | |
2656 | ||
cd28ab6a | 2657 | case OP_TXINDEXLE: |
13b97b74 | 2658 | /* TX index reports status for both ports */ |
f55925d7 | 2659 | sky2_tx_done(hw->dev[0], status & 0xfff); |
e07b1aa8 SH |
2660 | if (hw->dev[1]) |
2661 | sky2_tx_done(hw->dev[1], | |
2662 | ((status >> 24) & 0xff) | |
2663 | | (u16)(length & 0xf) << 8); | |
cd28ab6a SH |
2664 | break; |
2665 | ||
cd28ab6a SH |
2666 | default: |
2667 | if (net_ratelimit()) | |
ada1db5c | 2668 | pr_warning("unknown status opcode 0x%x\n", opcode); |
cd28ab6a | 2669 | } |
26691830 | 2670 | } while (hw->st_idx != idx); |
cd28ab6a | 2671 | |
fe2a24df SH |
2672 | /* Fully processed status ring so clear irq */ |
2673 | sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); | |
2674 | ||
13210ce5 | 2675 | exit_loop: |
bf15fe99 SH |
2676 | sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]); |
2677 | sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]); | |
22e11703 | 2678 | |
e07b1aa8 | 2679 | return work_done; |
cd28ab6a SH |
2680 | } |
2681 | ||
2682 | static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status) | |
2683 | { | |
2684 | struct net_device *dev = hw->dev[port]; | |
2685 | ||
3be92a70 | 2686 | if (net_ratelimit()) |
ada1db5c | 2687 | netdev_info(dev, "hw error interrupt status 0x%x\n", status); |
cd28ab6a SH |
2688 | |
2689 | if (status & Y2_IS_PAR_RD1) { | |
3be92a70 | 2690 | if (net_ratelimit()) |
ada1db5c | 2691 | netdev_err(dev, "ram data read parity error\n"); |
cd28ab6a SH |
2692 | /* Clear IRQ */ |
2693 | sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR); | |
2694 | } | |
2695 | ||
2696 | if (status & Y2_IS_PAR_WR1) { | |
3be92a70 | 2697 | if (net_ratelimit()) |
ada1db5c | 2698 | netdev_err(dev, "ram data write parity error\n"); |
cd28ab6a SH |
2699 | |
2700 | sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR); | |
2701 | } | |
2702 | ||
2703 | if (status & Y2_IS_PAR_MAC1) { | |
3be92a70 | 2704 | if (net_ratelimit()) |
ada1db5c | 2705 | netdev_err(dev, "MAC parity error\n"); |
cd28ab6a SH |
2706 | sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE); |
2707 | } | |
2708 | ||
2709 | if (status & Y2_IS_PAR_RX1) { | |
3be92a70 | 2710 | if (net_ratelimit()) |
ada1db5c | 2711 | netdev_err(dev, "RX parity error\n"); |
cd28ab6a SH |
2712 | sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR); |
2713 | } | |
2714 | ||
2715 | if (status & Y2_IS_TCP_TXA1) { | |
3be92a70 | 2716 | if (net_ratelimit()) |
ada1db5c | 2717 | netdev_err(dev, "TCP segmentation error\n"); |
cd28ab6a SH |
2718 | sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP); |
2719 | } | |
2720 | } | |
2721 | ||
2722 | static void sky2_hw_intr(struct sky2_hw *hw) | |
2723 | { | |
555382cb | 2724 | struct pci_dev *pdev = hw->pdev; |
cd28ab6a | 2725 | u32 status = sky2_read32(hw, B0_HWE_ISRC); |
555382cb SH |
2726 | u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK); |
2727 | ||
2728 | status &= hwmsk; | |
cd28ab6a | 2729 | |
793b883e | 2730 | if (status & Y2_IS_TIST_OV) |
cd28ab6a | 2731 | sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); |
cd28ab6a SH |
2732 | |
2733 | if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { | |
793b883e SH |
2734 | u16 pci_err; |
2735 | ||
a40ccc68 | 2736 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
b32f40c4 | 2737 | pci_err = sky2_pci_read16(hw, PCI_STATUS); |
3be92a70 | 2738 | if (net_ratelimit()) |
555382cb | 2739 | dev_err(&pdev->dev, "PCI hardware error (0x%x)\n", |
b02a9258 | 2740 | pci_err); |
cd28ab6a | 2741 | |
b32f40c4 | 2742 | sky2_pci_write16(hw, PCI_STATUS, |
167f53d0 | 2743 | pci_err | PCI_STATUS_ERROR_BITS); |
a40ccc68 | 2744 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
cd28ab6a SH |
2745 | } |
2746 | ||
2747 | if (status & Y2_IS_PCI_EXP) { | |
d571b694 | 2748 | /* PCI-Express uncorrectable Error occurred */ |
555382cb | 2749 | u32 err; |
cd28ab6a | 2750 | |
a40ccc68 | 2751 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
7782c8c4 SH |
2752 | err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); |
2753 | sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, | |
2754 | 0xfffffffful); | |
3be92a70 | 2755 | if (net_ratelimit()) |
555382cb | 2756 | dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err); |
cf06ffb4 | 2757 | |
7782c8c4 | 2758 | sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); |
a40ccc68 | 2759 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
cd28ab6a SH |
2760 | } |
2761 | ||
2762 | if (status & Y2_HWE_L1_MASK) | |
2763 | sky2_hw_error(hw, 0, status); | |
2764 | status >>= 8; | |
2765 | if (status & Y2_HWE_L1_MASK) | |
2766 | sky2_hw_error(hw, 1, status); | |
2767 | } | |
2768 | ||
2769 | static void sky2_mac_intr(struct sky2_hw *hw, unsigned port) | |
2770 | { | |
2771 | struct net_device *dev = hw->dev[port]; | |
2772 | struct sky2_port *sky2 = netdev_priv(dev); | |
2773 | u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC)); | |
2774 | ||
6c35abae | 2775 | netif_info(sky2, intr, dev, "mac interrupt status 0x%x\n", status); |
cd28ab6a | 2776 | |
a3caeada SH |
2777 | if (status & GM_IS_RX_CO_OV) |
2778 | gma_read16(hw, port, GM_RX_IRQ_SRC); | |
2779 | ||
2780 | if (status & GM_IS_TX_CO_OV) | |
2781 | gma_read16(hw, port, GM_TX_IRQ_SRC); | |
2782 | ||
cd28ab6a | 2783 | if (status & GM_IS_RX_FF_OR) { |
7138a0f5 | 2784 | ++dev->stats.rx_fifo_errors; |
cd28ab6a SH |
2785 | sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO); |
2786 | } | |
2787 | ||
2788 | if (status & GM_IS_TX_FF_UR) { | |
7138a0f5 | 2789 | ++dev->stats.tx_fifo_errors; |
cd28ab6a SH |
2790 | sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU); |
2791 | } | |
cd28ab6a SH |
2792 | } |
2793 | ||
40b01727 | 2794 | /* This should never happen it is a bug. */ |
c119731d | 2795 | static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q) |
d257924e SH |
2796 | { |
2797 | struct net_device *dev = hw->dev[port]; | |
c119731d | 2798 | u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX)); |
d257924e | 2799 | |
ada1db5c | 2800 | dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n", |
c119731d SH |
2801 | dev->name, (unsigned) q, (unsigned) idx, |
2802 | (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX))); | |
d257924e | 2803 | |
40b01727 | 2804 | sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK); |
d257924e | 2805 | } |
cd28ab6a | 2806 | |
75e80683 SH |
2807 | static int sky2_rx_hung(struct net_device *dev) |
2808 | { | |
2809 | struct sky2_port *sky2 = netdev_priv(dev); | |
2810 | struct sky2_hw *hw = sky2->hw; | |
2811 | unsigned port = sky2->port; | |
2812 | unsigned rxq = rxqaddr[port]; | |
2813 | u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP)); | |
2814 | u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV)); | |
2815 | u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP)); | |
2816 | u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL)); | |
2817 | ||
2818 | /* If idle and MAC or PCI is stuck */ | |
2819 | if (sky2->check.last == dev->last_rx && | |
2820 | ((mac_rp == sky2->check.mac_rp && | |
2821 | mac_lev != 0 && mac_lev >= sky2->check.mac_lev) || | |
2822 | /* Check if the PCI RX hang */ | |
2823 | (fifo_rp == sky2->check.fifo_rp && | |
2824 | fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) { | |
ada1db5c JP |
2825 | netdev_printk(KERN_DEBUG, dev, |
2826 | "hung mac %d:%d fifo %d (%d:%d)\n", | |
2827 | mac_lev, mac_rp, fifo_lev, | |
2828 | fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP))); | |
75e80683 SH |
2829 | return 1; |
2830 | } else { | |
2831 | sky2->check.last = dev->last_rx; | |
2832 | sky2->check.mac_rp = mac_rp; | |
2833 | sky2->check.mac_lev = mac_lev; | |
2834 | sky2->check.fifo_rp = fifo_rp; | |
2835 | sky2->check.fifo_lev = fifo_lev; | |
2836 | return 0; | |
2837 | } | |
2838 | } | |
2839 | ||
32c2c300 | 2840 | static void sky2_watchdog(unsigned long arg) |
d27ed387 | 2841 | { |
01bd7564 | 2842 | struct sky2_hw *hw = (struct sky2_hw *) arg; |
d27ed387 | 2843 | |
75e80683 | 2844 | /* Check for lost IRQ once a second */ |
32c2c300 | 2845 | if (sky2_read32(hw, B0_ISRC)) { |
bea3348e | 2846 | napi_schedule(&hw->napi); |
75e80683 SH |
2847 | } else { |
2848 | int i, active = 0; | |
2849 | ||
2850 | for (i = 0; i < hw->ports; i++) { | |
bea3348e | 2851 | struct net_device *dev = hw->dev[i]; |
75e80683 SH |
2852 | if (!netif_running(dev)) |
2853 | continue; | |
2854 | ++active; | |
2855 | ||
2856 | /* For chips with Rx FIFO, check if stuck */ | |
39dbd958 | 2857 | if ((hw->flags & SKY2_HW_RAM_BUFFER) && |
75e80683 | 2858 | sky2_rx_hung(dev)) { |
ada1db5c | 2859 | netdev_info(dev, "receiver hang detected\n"); |
75e80683 SH |
2860 | schedule_work(&hw->restart_work); |
2861 | return; | |
2862 | } | |
2863 | } | |
2864 | ||
2865 | if (active == 0) | |
2866 | return; | |
32c2c300 | 2867 | } |
01bd7564 | 2868 | |
75e80683 | 2869 | mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ)); |
d27ed387 SH |
2870 | } |
2871 | ||
40b01727 SH |
2872 | /* Hardware/software error handling */ |
2873 | static void sky2_err_intr(struct sky2_hw *hw, u32 status) | |
cd28ab6a | 2874 | { |
40b01727 SH |
2875 | if (net_ratelimit()) |
2876 | dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status); | |
cd28ab6a | 2877 | |
1e5f1283 SH |
2878 | if (status & Y2_IS_HW_ERR) |
2879 | sky2_hw_intr(hw); | |
d257924e | 2880 | |
1e5f1283 SH |
2881 | if (status & Y2_IS_IRQ_MAC1) |
2882 | sky2_mac_intr(hw, 0); | |
cd28ab6a | 2883 | |
1e5f1283 SH |
2884 | if (status & Y2_IS_IRQ_MAC2) |
2885 | sky2_mac_intr(hw, 1); | |
cd28ab6a | 2886 | |
1e5f1283 | 2887 | if (status & Y2_IS_CHK_RX1) |
c119731d | 2888 | sky2_le_error(hw, 0, Q_R1); |
d257924e | 2889 | |
1e5f1283 | 2890 | if (status & Y2_IS_CHK_RX2) |
c119731d | 2891 | sky2_le_error(hw, 1, Q_R2); |
d257924e | 2892 | |
1e5f1283 | 2893 | if (status & Y2_IS_CHK_TXA1) |
c119731d | 2894 | sky2_le_error(hw, 0, Q_XA1); |
d257924e | 2895 | |
1e5f1283 | 2896 | if (status & Y2_IS_CHK_TXA2) |
c119731d | 2897 | sky2_le_error(hw, 1, Q_XA2); |
40b01727 SH |
2898 | } |
2899 | ||
bea3348e | 2900 | static int sky2_poll(struct napi_struct *napi, int work_limit) |
40b01727 | 2901 | { |
bea3348e | 2902 | struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi); |
40b01727 | 2903 | u32 status = sky2_read32(hw, B0_Y2_SP_EISR); |
6f535763 | 2904 | int work_done = 0; |
26691830 | 2905 | u16 idx; |
40b01727 SH |
2906 | |
2907 | if (unlikely(status & Y2_IS_ERROR)) | |
2908 | sky2_err_intr(hw, status); | |
2909 | ||
2910 | if (status & Y2_IS_IRQ_PHY1) | |
2911 | sky2_phy_intr(hw, 0); | |
2912 | ||
2913 | if (status & Y2_IS_IRQ_PHY2) | |
2914 | sky2_phy_intr(hw, 1); | |
cd28ab6a | 2915 | |
0f5aac70 SH |
2916 | if (status & Y2_IS_PHY_QLNK) |
2917 | sky2_qlink_intr(hw); | |
2918 | ||
26691830 SH |
2919 | while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) { |
2920 | work_done += sky2_status_intr(hw, work_limit - work_done, idx); | |
6f535763 DM |
2921 | |
2922 | if (work_done >= work_limit) | |
26691830 SH |
2923 | goto done; |
2924 | } | |
6f535763 | 2925 | |
26691830 SH |
2926 | napi_complete(napi); |
2927 | sky2_read32(hw, B0_Y2_SP_LISR); | |
2928 | done: | |
6f535763 | 2929 | |
bea3348e | 2930 | return work_done; |
e07b1aa8 SH |
2931 | } |
2932 | ||
7d12e780 | 2933 | static irqreturn_t sky2_intr(int irq, void *dev_id) |
e07b1aa8 SH |
2934 | { |
2935 | struct sky2_hw *hw = dev_id; | |
e07b1aa8 SH |
2936 | u32 status; |
2937 | ||
2938 | /* Reading this mask interrupts as side effect */ | |
2939 | status = sky2_read32(hw, B0_Y2_SP_ISRC2); | |
2940 | if (status == 0 || status == ~0) | |
2941 | return IRQ_NONE; | |
793b883e | 2942 | |
e07b1aa8 | 2943 | prefetch(&hw->st_le[hw->st_idx]); |
bea3348e SH |
2944 | |
2945 | napi_schedule(&hw->napi); | |
793b883e | 2946 | |
cd28ab6a SH |
2947 | return IRQ_HANDLED; |
2948 | } | |
2949 | ||
2950 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
2951 | static void sky2_netpoll(struct net_device *dev) | |
2952 | { | |
2953 | struct sky2_port *sky2 = netdev_priv(dev); | |
2954 | ||
bea3348e | 2955 | napi_schedule(&sky2->hw->napi); |
cd28ab6a SH |
2956 | } |
2957 | #endif | |
2958 | ||
2959 | /* Chip internal frequency for clock calculations */ | |
05745c4a | 2960 | static u32 sky2_mhz(const struct sky2_hw *hw) |
cd28ab6a | 2961 | { |
793b883e | 2962 | switch (hw->chip_id) { |
cd28ab6a | 2963 | case CHIP_ID_YUKON_EC: |
5a5b1ea0 | 2964 | case CHIP_ID_YUKON_EC_U: |
93745494 | 2965 | case CHIP_ID_YUKON_EX: |
ed4d4161 | 2966 | case CHIP_ID_YUKON_SUPR: |
0ce8b98d | 2967 | case CHIP_ID_YUKON_UL_2: |
0f5aac70 | 2968 | case CHIP_ID_YUKON_OPT: |
05745c4a SH |
2969 | return 125; |
2970 | ||
cd28ab6a | 2971 | case CHIP_ID_YUKON_FE: |
05745c4a SH |
2972 | return 100; |
2973 | ||
2974 | case CHIP_ID_YUKON_FE_P: | |
2975 | return 50; | |
2976 | ||
2977 | case CHIP_ID_YUKON_XL: | |
2978 | return 156; | |
2979 | ||
2980 | default: | |
2981 | BUG(); | |
cd28ab6a SH |
2982 | } |
2983 | } | |
2984 | ||
fb17358f | 2985 | static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us) |
cd28ab6a | 2986 | { |
fb17358f | 2987 | return sky2_mhz(hw) * us; |
cd28ab6a SH |
2988 | } |
2989 | ||
fb17358f | 2990 | static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk) |
cd28ab6a | 2991 | { |
fb17358f | 2992 | return clk / sky2_mhz(hw); |
cd28ab6a SH |
2993 | } |
2994 | ||
fb17358f | 2995 | |
e3173832 | 2996 | static int __devinit sky2_init(struct sky2_hw *hw) |
cd28ab6a | 2997 | { |
b89165f2 | 2998 | u8 t8; |
cd28ab6a | 2999 | |
167f53d0 | 3000 | /* Enable all clocks and check for bad PCI access */ |
b32f40c4 | 3001 | sky2_pci_write32(hw, PCI_DEV_REG3, 0); |
451af335 | 3002 | |
cd28ab6a | 3003 | sky2_write8(hw, B0_CTST, CS_RST_CLR); |
08c06d8a | 3004 | |
cd28ab6a | 3005 | hw->chip_id = sky2_read8(hw, B2_CHIP_ID); |
ea76e635 SH |
3006 | hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; |
3007 | ||
3008 | switch(hw->chip_id) { | |
3009 | case CHIP_ID_YUKON_XL: | |
39dbd958 | 3010 | hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY; |
bf73130d SH |
3011 | if (hw->chip_rev < CHIP_REV_YU_XL_A2) |
3012 | hw->flags |= SKY2_HW_RSS_BROKEN; | |
ea76e635 SH |
3013 | break; |
3014 | ||
3015 | case CHIP_ID_YUKON_EC_U: | |
3016 | hw->flags = SKY2_HW_GIGABIT | |
3017 | | SKY2_HW_NEWER_PHY | |
3018 | | SKY2_HW_ADV_POWER_CTL; | |
3019 | break; | |
3020 | ||
3021 | case CHIP_ID_YUKON_EX: | |
3022 | hw->flags = SKY2_HW_GIGABIT | |
3023 | | SKY2_HW_NEWER_PHY | |
3024 | | SKY2_HW_NEW_LE | |
3025 | | SKY2_HW_ADV_POWER_CTL; | |
3026 | ||
3027 | /* New transmit checksum */ | |
3028 | if (hw->chip_rev != CHIP_REV_YU_EX_B0) | |
3029 | hw->flags |= SKY2_HW_AUTO_TX_SUM; | |
3030 | break; | |
3031 | ||
3032 | case CHIP_ID_YUKON_EC: | |
3033 | /* This rev is really old, and requires untested workarounds */ | |
3034 | if (hw->chip_rev == CHIP_REV_YU_EC_A1) { | |
3035 | dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n"); | |
3036 | return -EOPNOTSUPP; | |
3037 | } | |
bf73130d | 3038 | hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RSS_BROKEN; |
ea76e635 SH |
3039 | break; |
3040 | ||
3041 | case CHIP_ID_YUKON_FE: | |
bf73130d | 3042 | hw->flags = SKY2_HW_RSS_BROKEN; |
ea76e635 SH |
3043 | break; |
3044 | ||
05745c4a SH |
3045 | case CHIP_ID_YUKON_FE_P: |
3046 | hw->flags = SKY2_HW_NEWER_PHY | |
3047 | | SKY2_HW_NEW_LE | |
3048 | | SKY2_HW_AUTO_TX_SUM | |
3049 | | SKY2_HW_ADV_POWER_CTL; | |
3050 | break; | |
ed4d4161 SH |
3051 | |
3052 | case CHIP_ID_YUKON_SUPR: | |
3053 | hw->flags = SKY2_HW_GIGABIT | |
3054 | | SKY2_HW_NEWER_PHY | |
3055 | | SKY2_HW_NEW_LE | |
3056 | | SKY2_HW_AUTO_TX_SUM | |
3057 | | SKY2_HW_ADV_POWER_CTL; | |
3058 | break; | |
3059 | ||
0ce8b98d | 3060 | case CHIP_ID_YUKON_UL_2: |
b338682d TI |
3061 | hw->flags = SKY2_HW_GIGABIT |
3062 | | SKY2_HW_ADV_POWER_CTL; | |
3063 | break; | |
3064 | ||
0f5aac70 | 3065 | case CHIP_ID_YUKON_OPT: |
0ce8b98d | 3066 | hw->flags = SKY2_HW_GIGABIT |
b338682d | 3067 | | SKY2_HW_NEW_LE |
0ce8b98d SH |
3068 | | SKY2_HW_ADV_POWER_CTL; |
3069 | break; | |
3070 | ||
ea76e635 | 3071 | default: |
b02a9258 SH |
3072 | dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n", |
3073 | hw->chip_id); | |
cd28ab6a SH |
3074 | return -EOPNOTSUPP; |
3075 | } | |
3076 | ||
ea76e635 SH |
3077 | hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); |
3078 | if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P') | |
3079 | hw->flags |= SKY2_HW_FIBRE_PHY; | |
290d4de5 | 3080 | |
e3173832 SH |
3081 | hw->ports = 1; |
3082 | t8 = sky2_read8(hw, B2_Y2_HW_RES); | |
3083 | if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { | |
3084 | if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) | |
3085 | ++hw->ports; | |
3086 | } | |
3087 | ||
74a61ebf MM |
3088 | if (sky2_read8(hw, B2_E_0)) |
3089 | hw->flags |= SKY2_HW_RAM_BUFFER; | |
3090 | ||
e3173832 SH |
3091 | return 0; |
3092 | } | |
3093 | ||
3094 | static void sky2_reset(struct sky2_hw *hw) | |
3095 | { | |
555382cb | 3096 | struct pci_dev *pdev = hw->pdev; |
e3173832 | 3097 | u16 status; |
555382cb SH |
3098 | int i, cap; |
3099 | u32 hwe_mask = Y2_HWE_ALL_MASK; | |
e3173832 | 3100 | |
cd28ab6a | 3101 | /* disable ASF */ |
acd12dde | 3102 | if (hw->chip_id == CHIP_ID_YUKON_EX |
3103 | || hw->chip_id == CHIP_ID_YUKON_SUPR) { | |
3104 | sky2_write32(hw, CPU_WDOG, 0); | |
4f44d8ba SH |
3105 | status = sky2_read16(hw, HCU_CCSR); |
3106 | status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE | | |
3107 | HCU_CCSR_UC_STATE_MSK); | |
acd12dde | 3108 | /* |
3109 | * CPU clock divider shouldn't be used because | |
3110 | * - ASF firmware may malfunction | |
3111 | * - Yukon-Supreme: Parallel FLASH doesn't support divided clocks | |
3112 | */ | |
3113 | status &= ~HCU_CCSR_CPU_CLK_DIVIDE_MSK; | |
4f44d8ba | 3114 | sky2_write16(hw, HCU_CCSR, status); |
acd12dde | 3115 | sky2_write32(hw, CPU_WDOG, 0); |
4f44d8ba SH |
3116 | } else |
3117 | sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET); | |
3118 | sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE); | |
cd28ab6a SH |
3119 | |
3120 | /* do a SW reset */ | |
3121 | sky2_write8(hw, B0_CTST, CS_RST_SET); | |
3122 | sky2_write8(hw, B0_CTST, CS_RST_CLR); | |
3123 | ||
ac93a394 SH |
3124 | /* allow writes to PCI config */ |
3125 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); | |
3126 | ||
cd28ab6a | 3127 | /* clear PCI errors, if any */ |
b32f40c4 | 3128 | status = sky2_pci_read16(hw, PCI_STATUS); |
167f53d0 | 3129 | status |= PCI_STATUS_ERROR_BITS; |
b32f40c4 | 3130 | sky2_pci_write16(hw, PCI_STATUS, status); |
cd28ab6a SH |
3131 | |
3132 | sky2_write8(hw, B0_CTST, CS_MRST_CLR); | |
3133 | ||
555382cb SH |
3134 | cap = pci_find_capability(pdev, PCI_CAP_ID_EXP); |
3135 | if (cap) { | |
7782c8c4 SH |
3136 | sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, |
3137 | 0xfffffffful); | |
555382cb SH |
3138 | |
3139 | /* If error bit is stuck on ignore it */ | |
3140 | if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP) | |
3141 | dev_info(&pdev->dev, "ignoring stuck error report bit\n"); | |
7782c8c4 | 3142 | else |
555382cb SH |
3143 | hwe_mask |= Y2_IS_PCI_EXP; |
3144 | } | |
cd28ab6a | 3145 | |
ae306cca | 3146 | sky2_power_on(hw); |
a40ccc68 | 3147 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
cd28ab6a SH |
3148 | |
3149 | for (i = 0; i < hw->ports; i++) { | |
3150 | sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); | |
3151 | sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); | |
69161611 | 3152 | |
ed4d4161 SH |
3153 | if (hw->chip_id == CHIP_ID_YUKON_EX || |
3154 | hw->chip_id == CHIP_ID_YUKON_SUPR) | |
69161611 SH |
3155 | sky2_write16(hw, SK_REG(i, GMAC_CTRL), |
3156 | GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | |
3157 | | GMC_BYP_RETR_ON); | |
877c8570 SH |
3158 | |
3159 | } | |
3160 | ||
3161 | if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev > CHIP_REV_YU_SU_B0) { | |
3162 | /* enable MACSec clock gating */ | |
3163 | sky2_pci_write32(hw, PCI_DEV_REG3, P_CLK_MACSEC_DIS); | |
cd28ab6a SH |
3164 | } |
3165 | ||
0f5aac70 SH |
3166 | if (hw->chip_id == CHIP_ID_YUKON_OPT) { |
3167 | u16 reg; | |
3168 | u32 msk; | |
3169 | ||
3170 | if (hw->chip_rev == 0) { | |
3171 | /* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */ | |
3172 | sky2_write32(hw, Y2_PEX_PHY_DATA, (0x80UL << 16) | (1 << 7)); | |
3173 | ||
3174 | /* set PHY Link Detect Timer to 1.1 second (11x 100ms) */ | |
3175 | reg = 10; | |
3176 | } else { | |
3177 | /* set PHY Link Detect Timer to 0.4 second (4x 100ms) */ | |
3178 | reg = 3; | |
3179 | } | |
3180 | ||
3181 | reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE; | |
3182 | ||
3183 | /* reset PHY Link Detect */ | |
a40ccc68 | 3184 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); |
0f5aac70 SH |
3185 | sky2_pci_write16(hw, PSM_CONFIG_REG4, |
3186 | reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT); | |
3187 | sky2_pci_write16(hw, PSM_CONFIG_REG4, reg); | |
3188 | ||
3189 | ||
3190 | /* enable PHY Quick Link */ | |
3191 | msk = sky2_read32(hw, B0_IMSK); | |
3192 | msk |= Y2_IS_PHY_QLNK; | |
3193 | sky2_write32(hw, B0_IMSK, msk); | |
3194 | ||
3195 | /* check if PSMv2 was running before */ | |
3196 | reg = sky2_pci_read16(hw, PSM_CONFIG_REG3); | |
3197 | if (reg & PCI_EXP_LNKCTL_ASPMC) { | |
8b055431 | 3198 | cap = pci_find_capability(pdev, PCI_CAP_ID_EXP); |
0f5aac70 SH |
3199 | /* restore the PCIe Link Control register */ |
3200 | sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg); | |
3201 | } | |
a40ccc68 | 3202 | sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); |
0f5aac70 SH |
3203 | |
3204 | /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */ | |
3205 | sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16)); | |
3206 | } | |
3207 | ||
793b883e SH |
3208 | /* Clear I2C IRQ noise */ |
3209 | sky2_write32(hw, B2_I2C_IRQ, 1); | |
cd28ab6a SH |
3210 | |
3211 | /* turn off hardware timer (unused) */ | |
3212 | sky2_write8(hw, B2_TI_CTRL, TIM_STOP); | |
3213 | sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ); | |
793b883e | 3214 | |
69634ee7 SH |
3215 | /* Turn off descriptor polling */ |
3216 | sky2_write32(hw, B28_DPT_CTRL, DPT_STOP); | |
cd28ab6a SH |
3217 | |
3218 | /* Turn off receive timestamp */ | |
3219 | sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP); | |
793b883e | 3220 | sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); |
cd28ab6a SH |
3221 | |
3222 | /* enable the Tx Arbiters */ | |
3223 | for (i = 0; i < hw->ports; i++) | |
3224 | sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB); | |
3225 | ||
3226 | /* Initialize ram interface */ | |
3227 | for (i = 0; i < hw->ports; i++) { | |
793b883e | 3228 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR); |
cd28ab6a SH |
3229 | |
3230 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53); | |
3231 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53); | |
3232 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53); | |
3233 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53); | |
3234 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53); | |
3235 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53); | |
3236 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53); | |
3237 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53); | |
3238 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53); | |
3239 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53); | |
3240 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53); | |
3241 | sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53); | |
3242 | } | |
3243 | ||
555382cb | 3244 | sky2_write32(hw, B0_HWE_IMSK, hwe_mask); |
cd28ab6a | 3245 | |
cd28ab6a | 3246 | for (i = 0; i < hw->ports; i++) |
d3bcfbeb | 3247 | sky2_gmac_reset(hw, i); |
cd28ab6a | 3248 | |
efe91932 | 3249 | memset(hw->st_le, 0, hw->st_size * sizeof(struct sky2_status_le)); |
cd28ab6a SH |
3250 | hw->st_idx = 0; |
3251 | ||
3252 | sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET); | |
3253 | sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR); | |
3254 | ||
3255 | sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma); | |
793b883e | 3256 | sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32); |
cd28ab6a SH |
3257 | |
3258 | /* Set the list last index */ | |
efe91932 | 3259 | sky2_write16(hw, STAT_LAST_IDX, hw->st_size - 1); |
cd28ab6a | 3260 | |
290d4de5 SH |
3261 | sky2_write16(hw, STAT_TX_IDX_TH, 10); |
3262 | sky2_write8(hw, STAT_FIFO_WM, 16); | |
cd28ab6a | 3263 | |
290d4de5 SH |
3264 | /* set Status-FIFO ISR watermark */ |
3265 | if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0) | |
3266 | sky2_write8(hw, STAT_FIFO_ISR_WM, 4); | |
3267 | else | |
3268 | sky2_write8(hw, STAT_FIFO_ISR_WM, 16); | |
cd28ab6a | 3269 | |
290d4de5 | 3270 | sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000)); |
77b3d6a2 SH |
3271 | sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20)); |
3272 | sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100)); | |
cd28ab6a | 3273 | |
793b883e | 3274 | /* enable status unit */ |
cd28ab6a SH |
3275 | sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON); |
3276 | ||
3277 | sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); | |
3278 | sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START); | |
3279 | sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); | |
e3173832 SH |
3280 | } |
3281 | ||
af18d8b8 SH |
3282 | /* Take device down (offline). |
3283 | * Equivalent to doing dev_stop() but this does not | |
3284 | * inform upper layers of the transistion. | |
3285 | */ | |
3286 | static void sky2_detach(struct net_device *dev) | |
3287 | { | |
3288 | if (netif_running(dev)) { | |
c36531b9 | 3289 | netif_tx_lock(dev); |
af18d8b8 | 3290 | netif_device_detach(dev); /* stop txq */ |
c36531b9 | 3291 | netif_tx_unlock(dev); |
af18d8b8 SH |
3292 | sky2_down(dev); |
3293 | } | |
3294 | } | |
3295 | ||
3296 | /* Bring device back after doing sky2_detach */ | |
3297 | static int sky2_reattach(struct net_device *dev) | |
3298 | { | |
3299 | int err = 0; | |
3300 | ||
3301 | if (netif_running(dev)) { | |
3302 | err = sky2_up(dev); | |
3303 | if (err) { | |
ada1db5c | 3304 | netdev_info(dev, "could not restart %d\n", err); |
af18d8b8 SH |
3305 | dev_close(dev); |
3306 | } else { | |
3307 | netif_device_attach(dev); | |
3308 | sky2_set_multicast(dev); | |
3309 | } | |
3310 | } | |
3311 | ||
3312 | return err; | |
3313 | } | |
3314 | ||
d72ff8fa | 3315 | static void sky2_all_down(struct sky2_hw *hw) |
81906791 | 3316 | { |
af18d8b8 | 3317 | int i; |
81906791 | 3318 | |
d72ff8fa | 3319 | sky2_read32(hw, B0_IMSK); |
8cfcbe99 | 3320 | sky2_write32(hw, B0_IMSK, 0); |
93135a3b MM |
3321 | synchronize_irq(hw->pdev->irq); |
3322 | napi_disable(&hw->napi); | |
8a0c9228 MM |
3323 | |
3324 | for (i = 0; i < hw->ports; i++) { | |
3325 | struct net_device *dev = hw->dev[i]; | |
3326 | struct sky2_port *sky2 = netdev_priv(dev); | |
3327 | ||
3328 | if (!netif_running(dev)) | |
3329 | continue; | |
3330 | ||
3331 | netif_carrier_off(dev); | |
3332 | netif_tx_disable(dev); | |
3333 | sky2_hw_down(sky2); | |
3334 | } | |
d72ff8fa | 3335 | } |
8a0c9228 | 3336 | |
d72ff8fa MM |
3337 | static void sky2_all_up(struct sky2_hw *hw) |
3338 | { | |
3339 | u32 imask = Y2_IS_BASE; | |
3340 | int i; | |
81906791 | 3341 | |
8a0c9228 MM |
3342 | for (i = 0; i < hw->ports; i++) { |
3343 | struct net_device *dev = hw->dev[i]; | |
3344 | struct sky2_port *sky2 = netdev_priv(dev); | |
3345 | ||
3346 | if (!netif_running(dev)) | |
3347 | continue; | |
3348 | ||
3349 | sky2_hw_up(sky2); | |
37652522 | 3350 | sky2_set_multicast(dev); |
d72ff8fa | 3351 | imask |= portirq_msk[i]; |
8a0c9228 MM |
3352 | netif_wake_queue(dev); |
3353 | } | |
3354 | ||
3355 | sky2_write32(hw, B0_IMSK, imask); | |
3356 | sky2_read32(hw, B0_IMSK); | |
3357 | ||
3358 | sky2_read32(hw, B0_Y2_SP_LISR); | |
3359 | napi_enable(&hw->napi); | |
d72ff8fa MM |
3360 | } |
3361 | ||
3362 | static void sky2_restart(struct work_struct *work) | |
3363 | { | |
3364 | struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work); | |
3365 | ||
3366 | rtnl_lock(); | |
3367 | ||
3368 | sky2_all_down(hw); | |
3369 | sky2_reset(hw); | |
3370 | sky2_all_up(hw); | |
81906791 | 3371 | |
81906791 SH |
3372 | rtnl_unlock(); |
3373 | } | |
3374 | ||
e3173832 SH |
3375 | static inline u8 sky2_wol_supported(const struct sky2_hw *hw) |
3376 | { | |
3377 | return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0; | |
3378 | } | |
3379 | ||
3380 | static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) | |
3381 | { | |
3382 | const struct sky2_port *sky2 = netdev_priv(dev); | |
3383 | ||
3384 | wol->supported = sky2_wol_supported(sky2->hw); | |
3385 | wol->wolopts = sky2->wol; | |
3386 | } | |
3387 | ||
3388 | static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) | |
3389 | { | |
3390 | struct sky2_port *sky2 = netdev_priv(dev); | |
3391 | struct sky2_hw *hw = sky2->hw; | |
cd28ab6a | 3392 | |
8e95a202 JP |
3393 | if ((wol->wolopts & ~sky2_wol_supported(sky2->hw)) || |
3394 | !device_can_wakeup(&hw->pdev->dev)) | |
e3173832 SH |
3395 | return -EOPNOTSUPP; |
3396 | ||
3397 | sky2->wol = wol->wolopts; | |
cd28ab6a SH |
3398 | return 0; |
3399 | } | |
3400 | ||
28bd181a | 3401 | static u32 sky2_supported_modes(const struct sky2_hw *hw) |
cd28ab6a | 3402 | { |
b89165f2 SH |
3403 | if (sky2_is_copper(hw)) { |
3404 | u32 modes = SUPPORTED_10baseT_Half | |
3405 | | SUPPORTED_10baseT_Full | |
3406 | | SUPPORTED_100baseT_Half | |
3407 | | SUPPORTED_100baseT_Full | |
3408 | | SUPPORTED_Autoneg | SUPPORTED_TP; | |
cd28ab6a | 3409 | |
ea76e635 | 3410 | if (hw->flags & SKY2_HW_GIGABIT) |
cd28ab6a | 3411 | modes |= SUPPORTED_1000baseT_Half |
b89165f2 SH |
3412 | | SUPPORTED_1000baseT_Full; |
3413 | return modes; | |
cd28ab6a | 3414 | } else |
b89165f2 SH |
3415 | return SUPPORTED_1000baseT_Half |
3416 | | SUPPORTED_1000baseT_Full | |
3417 | | SUPPORTED_Autoneg | |
3418 | | SUPPORTED_FIBRE; | |
cd28ab6a SH |
3419 | } |
3420 | ||
793b883e | 3421 | static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) |
cd28ab6a SH |
3422 | { |
3423 | struct sky2_port *sky2 = netdev_priv(dev); | |
3424 | struct sky2_hw *hw = sky2->hw; | |
3425 | ||
3426 | ecmd->transceiver = XCVR_INTERNAL; | |
3427 | ecmd->supported = sky2_supported_modes(hw); | |
3428 | ecmd->phy_address = PHY_ADDR_MARV; | |
b89165f2 | 3429 | if (sky2_is_copper(hw)) { |
cd28ab6a | 3430 | ecmd->port = PORT_TP; |
b89165f2 SH |
3431 | ecmd->speed = sky2->speed; |
3432 | } else { | |
3433 | ecmd->speed = SPEED_1000; | |
cd28ab6a | 3434 | ecmd->port = PORT_FIBRE; |
b89165f2 | 3435 | } |
cd28ab6a SH |
3436 | |
3437 | ecmd->advertising = sky2->advertising; | |
0ea065e5 SH |
3438 | ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED) |
3439 | ? AUTONEG_ENABLE : AUTONEG_DISABLE; | |
cd28ab6a SH |
3440 | ecmd->duplex = sky2->duplex; |
3441 | return 0; | |
3442 | } | |
3443 | ||
3444 | static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) | |
3445 | { | |
3446 | struct sky2_port *sky2 = netdev_priv(dev); | |
3447 | const struct sky2_hw *hw = sky2->hw; | |
3448 | u32 supported = sky2_supported_modes(hw); | |
3449 | ||
3450 | if (ecmd->autoneg == AUTONEG_ENABLE) { | |
0ea065e5 | 3451 | sky2->flags |= SKY2_FLAG_AUTO_SPEED; |
cd28ab6a SH |
3452 | ecmd->advertising = supported; |
3453 | sky2->duplex = -1; | |
3454 | sky2->speed = -1; | |
3455 | } else { | |
3456 | u32 setting; | |
3457 | ||
793b883e | 3458 | switch (ecmd->speed) { |
cd28ab6a SH |
3459 | case SPEED_1000: |
3460 | if (ecmd->duplex == DUPLEX_FULL) | |
3461 | setting = SUPPORTED_1000baseT_Full; | |
3462 | else if (ecmd->duplex == DUPLEX_HALF) | |
3463 | setting = SUPPORTED_1000baseT_Half; | |
3464 | else | |
3465 | return -EINVAL; | |
3466 | break; | |
3467 | case SPEED_100: | |
3468 | if (ecmd->duplex == DUPLEX_FULL) | |
3469 | setting = SUPPORTED_100baseT_Full; | |
3470 | else if (ecmd->duplex == DUPLEX_HALF) | |
3471 | setting = SUPPORTED_100baseT_Half; | |
3472 | else | |
3473 | return -EINVAL; | |
3474 | break; | |
3475 | ||
3476 | case SPEED_10: | |
3477 | if (ecmd->duplex == DUPLEX_FULL) | |
3478 | setting = SUPPORTED_10baseT_Full; | |
3479 | else if (ecmd->duplex == DUPLEX_HALF) | |
3480 | setting = SUPPORTED_10baseT_Half; | |
3481 | else | |
3482 | return -EINVAL; | |
3483 | break; | |
3484 | default: | |
3485 | return -EINVAL; | |
3486 | } | |
3487 | ||
3488 | if ((setting & supported) == 0) | |
3489 | return -EINVAL; | |
3490 | ||
3491 | sky2->speed = ecmd->speed; | |
3492 | sky2->duplex = ecmd->duplex; | |
0ea065e5 | 3493 | sky2->flags &= ~SKY2_FLAG_AUTO_SPEED; |
cd28ab6a SH |
3494 | } |
3495 | ||
cd28ab6a SH |
3496 | sky2->advertising = ecmd->advertising; |
3497 | ||
d1b139c0 | 3498 | if (netif_running(dev)) { |
1b537565 | 3499 | sky2_phy_reinit(sky2); |
d1b139c0 SH |
3500 | sky2_set_multicast(dev); |
3501 | } | |
cd28ab6a SH |
3502 | |
3503 | return 0; | |
3504 | } | |
3505 | ||
3506 | static void sky2_get_drvinfo(struct net_device *dev, | |
3507 | struct ethtool_drvinfo *info) | |
3508 | { | |
3509 | struct sky2_port *sky2 = netdev_priv(dev); | |
3510 | ||
3511 | strcpy(info->driver, DRV_NAME); | |
3512 | strcpy(info->version, DRV_VERSION); | |
3513 | strcpy(info->fw_version, "N/A"); | |
3514 | strcpy(info->bus_info, pci_name(sky2->hw->pdev)); | |
3515 | } | |
3516 | ||
3517 | static const struct sky2_stat { | |
793b883e SH |
3518 | char name[ETH_GSTRING_LEN]; |
3519 | u16 offset; | |
cd28ab6a SH |
3520 | } sky2_stats[] = { |
3521 | { "tx_bytes", GM_TXO_OK_HI }, | |
3522 | { "rx_bytes", GM_RXO_OK_HI }, | |
3523 | { "tx_broadcast", GM_TXF_BC_OK }, | |
3524 | { "rx_broadcast", GM_RXF_BC_OK }, | |
3525 | { "tx_multicast", GM_TXF_MC_OK }, | |
3526 | { "rx_multicast", GM_RXF_MC_OK }, | |
3527 | { "tx_unicast", GM_TXF_UC_OK }, | |
3528 | { "rx_unicast", GM_RXF_UC_OK }, | |
3529 | { "tx_mac_pause", GM_TXF_MPAUSE }, | |
3530 | { "rx_mac_pause", GM_RXF_MPAUSE }, | |
eadfa7dd | 3531 | { "collisions", GM_TXF_COL }, |
cd28ab6a SH |
3532 | { "late_collision",GM_TXF_LAT_COL }, |
3533 | { "aborted", GM_TXF_ABO_COL }, | |
eadfa7dd | 3534 | { "single_collisions", GM_TXF_SNG_COL }, |
cd28ab6a | 3535 | { "multi_collisions", GM_TXF_MUL_COL }, |
eadfa7dd | 3536 | |
d2604540 | 3537 | { "rx_short", GM_RXF_SHT }, |
cd28ab6a | 3538 | { "rx_runt", GM_RXE_FRAG }, |
eadfa7dd SH |
3539 | { "rx_64_byte_packets", GM_RXF_64B }, |
3540 | { "rx_65_to_127_byte_packets", GM_RXF_127B }, | |
3541 | { "rx_128_to_255_byte_packets", GM_RXF_255B }, | |
3542 | { "rx_256_to_511_byte_packets", GM_RXF_511B }, | |
3543 | { "rx_512_to_1023_byte_packets", GM_RXF_1023B }, | |
3544 | { "rx_1024_to_1518_byte_packets", GM_RXF_1518B }, | |
3545 | { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ }, | |
cd28ab6a | 3546 | { "rx_too_long", GM_RXF_LNG_ERR }, |
eadfa7dd SH |
3547 | { "rx_fifo_overflow", GM_RXE_FIFO_OV }, |
3548 | { "rx_jabber", GM_RXF_JAB_PKT }, | |
cd28ab6a | 3549 | { "rx_fcs_error", GM_RXF_FCS_ERR }, |
eadfa7dd SH |
3550 | |
3551 | { "tx_64_byte_packets", GM_TXF_64B }, | |
3552 | { "tx_65_to_127_byte_packets", GM_TXF_127B }, | |
3553 | { "tx_128_to_255_byte_packets", GM_TXF_255B }, | |
3554 | { "tx_256_to_511_byte_packets", GM_TXF_511B }, | |
3555 | { "tx_512_to_1023_byte_packets", GM_TXF_1023B }, | |
3556 | { "tx_1024_to_1518_byte_packets", GM_TXF_1518B }, | |
3557 | { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ }, | |
3558 | { "tx_fifo_underrun", GM_TXE_FIFO_UR }, | |
cd28ab6a SH |
3559 | }; |
3560 | ||
cd28ab6a SH |
3561 | static u32 sky2_get_rx_csum(struct net_device *dev) |
3562 | { | |
3563 | struct sky2_port *sky2 = netdev_priv(dev); | |
3564 | ||
0ea065e5 | 3565 | return !!(sky2->flags & SKY2_FLAG_RX_CHECKSUM); |
cd28ab6a SH |
3566 | } |
3567 | ||
3568 | static int sky2_set_rx_csum(struct net_device *dev, u32 data) | |
3569 | { | |
3570 | struct sky2_port *sky2 = netdev_priv(dev); | |
3571 | ||
0ea065e5 SH |
3572 | if (data) |
3573 | sky2->flags |= SKY2_FLAG_RX_CHECKSUM; | |
3574 | else | |
3575 | sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM; | |
793b883e | 3576 | |
cd28ab6a SH |
3577 | sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), |
3578 | data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); | |
3579 | ||
3580 | return 0; | |
3581 | } | |
3582 | ||
3583 | static u32 sky2_get_msglevel(struct net_device *netdev) | |
3584 | { | |
3585 | struct sky2_port *sky2 = netdev_priv(netdev); | |
3586 | return sky2->msg_enable; | |
3587 | } | |
3588 | ||
9a7ae0a9 SH |
3589 | static int sky2_nway_reset(struct net_device *dev) |
3590 | { | |
3591 | struct sky2_port *sky2 = netdev_priv(dev); | |
9a7ae0a9 | 3592 | |
0ea065e5 | 3593 | if (!netif_running(dev) || !(sky2->flags & SKY2_FLAG_AUTO_SPEED)) |
9a7ae0a9 SH |
3594 | return -EINVAL; |
3595 | ||
1b537565 | 3596 | sky2_phy_reinit(sky2); |
d1b139c0 | 3597 | sky2_set_multicast(dev); |
9a7ae0a9 SH |
3598 | |
3599 | return 0; | |
3600 | } | |
3601 | ||
793b883e | 3602 | static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count) |
cd28ab6a SH |
3603 | { |
3604 | struct sky2_hw *hw = sky2->hw; | |
3605 | unsigned port = sky2->port; | |
3606 | int i; | |
3607 | ||
3608 | data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32 | |
793b883e | 3609 | | (u64) gma_read32(hw, port, GM_TXO_OK_LO); |
cd28ab6a | 3610 | data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32 |
793b883e | 3611 | | (u64) gma_read32(hw, port, GM_RXO_OK_LO); |
cd28ab6a | 3612 | |
793b883e | 3613 | for (i = 2; i < count; i++) |
cd28ab6a SH |
3614 | data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset); |
3615 | } | |
3616 | ||
cd28ab6a SH |
3617 | static void sky2_set_msglevel(struct net_device *netdev, u32 value) |
3618 | { | |
3619 | struct sky2_port *sky2 = netdev_priv(netdev); | |
3620 | sky2->msg_enable = value; | |
3621 | } | |
3622 | ||
b9f2c044 | 3623 | static int sky2_get_sset_count(struct net_device *dev, int sset) |
cd28ab6a | 3624 | { |
b9f2c044 JG |
3625 | switch (sset) { |
3626 | case ETH_SS_STATS: | |
3627 | return ARRAY_SIZE(sky2_stats); | |
3628 | default: | |
3629 | return -EOPNOTSUPP; | |
3630 | } | |
cd28ab6a SH |
3631 | } |
3632 | ||
3633 | static void sky2_get_ethtool_stats(struct net_device *dev, | |
793b883e | 3634 | struct ethtool_stats *stats, u64 * data) |
cd28ab6a SH |
3635 | { |
3636 | struct sky2_port *sky2 = netdev_priv(dev); | |
3637 | ||
793b883e | 3638 | sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats)); |
cd28ab6a SH |
3639 | } |
3640 | ||
793b883e | 3641 | static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data) |
cd28ab6a SH |
3642 | { |
3643 | int i; | |
3644 | ||
3645 | switch (stringset) { | |
3646 | case ETH_SS_STATS: | |
3647 | for (i = 0; i < ARRAY_SIZE(sky2_stats); i++) | |
3648 | memcpy(data + i * ETH_GSTRING_LEN, | |
3649 | sky2_stats[i].name, ETH_GSTRING_LEN); | |
3650 | break; | |
3651 | } | |
3652 | } | |
3653 | ||
cd28ab6a SH |
3654 | static int sky2_set_mac_address(struct net_device *dev, void *p) |
3655 | { | |
3656 | struct sky2_port *sky2 = netdev_priv(dev); | |
a8ab1ec0 SH |
3657 | struct sky2_hw *hw = sky2->hw; |
3658 | unsigned port = sky2->port; | |
3659 | const struct sockaddr *addr = p; | |
cd28ab6a SH |
3660 | |
3661 | if (!is_valid_ether_addr(addr->sa_data)) | |
3662 | return -EADDRNOTAVAIL; | |
3663 | ||
cd28ab6a | 3664 | memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); |
a8ab1ec0 | 3665 | memcpy_toio(hw->regs + B2_MAC_1 + port * 8, |
cd28ab6a | 3666 | dev->dev_addr, ETH_ALEN); |
a8ab1ec0 | 3667 | memcpy_toio(hw->regs + B2_MAC_2 + port * 8, |
cd28ab6a | 3668 | dev->dev_addr, ETH_ALEN); |
1b537565 | 3669 | |
a8ab1ec0 SH |
3670 | /* virtual address for data */ |
3671 | gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr); | |
3672 | ||
3673 | /* physical address: used for pause frames */ | |
3674 | gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr); | |
1b537565 SH |
3675 | |
3676 | return 0; | |
cd28ab6a SH |
3677 | } |
3678 | ||
a052b52f SH |
3679 | static void inline sky2_add_filter(u8 filter[8], const u8 *addr) |
3680 | { | |
3681 | u32 bit; | |
3682 | ||
3683 | bit = ether_crc(ETH_ALEN, addr) & 63; | |
3684 | filter[bit >> 3] |= 1 << (bit & 7); | |
3685 | } | |
3686 | ||
cd28ab6a SH |
3687 | static void sky2_set_multicast(struct net_device *dev) |
3688 | { | |
3689 | struct sky2_port *sky2 = netdev_priv(dev); | |
3690 | struct sky2_hw *hw = sky2->hw; | |
3691 | unsigned port = sky2->port; | |
22bedad3 | 3692 | struct netdev_hw_addr *ha; |
cd28ab6a SH |
3693 | u16 reg; |
3694 | u8 filter[8]; | |
a052b52f SH |
3695 | int rx_pause; |
3696 | static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 }; | |
cd28ab6a | 3697 | |
a052b52f | 3698 | rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH); |
cd28ab6a SH |
3699 | memset(filter, 0, sizeof(filter)); |
3700 | ||
3701 | reg = gma_read16(hw, port, GM_RX_CTRL); | |
3702 | reg |= GM_RXCR_UCF_ENA; | |
3703 | ||
d571b694 | 3704 | if (dev->flags & IFF_PROMISC) /* promiscuous */ |
cd28ab6a | 3705 | reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); |
a052b52f | 3706 | else if (dev->flags & IFF_ALLMULTI) |
cd28ab6a | 3707 | memset(filter, 0xff, sizeof(filter)); |
4cd24eaf | 3708 | else if (netdev_mc_empty(dev) && !rx_pause) |
cd28ab6a SH |
3709 | reg &= ~GM_RXCR_MCF_ENA; |
3710 | else { | |
cd28ab6a SH |
3711 | reg |= GM_RXCR_MCF_ENA; |
3712 | ||
a052b52f SH |
3713 | if (rx_pause) |
3714 | sky2_add_filter(filter, pause_mc_addr); | |
3715 | ||
22bedad3 JP |
3716 | netdev_for_each_mc_addr(ha, dev) |
3717 | sky2_add_filter(filter, ha->addr); | |
cd28ab6a SH |
3718 | } |
3719 | ||
cd28ab6a | 3720 | gma_write16(hw, port, GM_MC_ADDR_H1, |
793b883e | 3721 | (u16) filter[0] | ((u16) filter[1] << 8)); |
cd28ab6a | 3722 | gma_write16(hw, port, GM_MC_ADDR_H2, |
793b883e | 3723 | (u16) filter[2] | ((u16) filter[3] << 8)); |
cd28ab6a | 3724 | gma_write16(hw, port, GM_MC_ADDR_H3, |
793b883e | 3725 | (u16) filter[4] | ((u16) filter[5] << 8)); |
cd28ab6a | 3726 | gma_write16(hw, port, GM_MC_ADDR_H4, |
793b883e | 3727 | (u16) filter[6] | ((u16) filter[7] << 8)); |
cd28ab6a SH |
3728 | |
3729 | gma_write16(hw, port, GM_RX_CTRL, reg); | |
3730 | } | |
3731 | ||
3732 | /* Can have one global because blinking is controlled by | |
3733 | * ethtool and that is always under RTNL mutex | |
3734 | */ | |
a84d0a3d | 3735 | static void sky2_led(struct sky2_port *sky2, enum led_mode mode) |
cd28ab6a | 3736 | { |
a84d0a3d SH |
3737 | struct sky2_hw *hw = sky2->hw; |
3738 | unsigned port = sky2->port; | |
793b883e | 3739 | |
a84d0a3d SH |
3740 | spin_lock_bh(&sky2->phy_lock); |
3741 | if (hw->chip_id == CHIP_ID_YUKON_EC_U || | |
3742 | hw->chip_id == CHIP_ID_YUKON_EX || | |
3743 | hw->chip_id == CHIP_ID_YUKON_SUPR) { | |
3744 | u16 pg; | |
793b883e SH |
3745 | pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); |
3746 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); | |
793b883e | 3747 | |
a84d0a3d SH |
3748 | switch (mode) { |
3749 | case MO_LED_OFF: | |
3750 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, | |
3751 | PHY_M_LEDC_LOS_CTRL(8) | | |
3752 | PHY_M_LEDC_INIT_CTRL(8) | | |
3753 | PHY_M_LEDC_STA1_CTRL(8) | | |
3754 | PHY_M_LEDC_STA0_CTRL(8)); | |
3755 | break; | |
3756 | case MO_LED_ON: | |
3757 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, | |
3758 | PHY_M_LEDC_LOS_CTRL(9) | | |
3759 | PHY_M_LEDC_INIT_CTRL(9) | | |
3760 | PHY_M_LEDC_STA1_CTRL(9) | | |
3761 | PHY_M_LEDC_STA0_CTRL(9)); | |
3762 | break; | |
3763 | case MO_LED_BLINK: | |
3764 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, | |
3765 | PHY_M_LEDC_LOS_CTRL(0xa) | | |
3766 | PHY_M_LEDC_INIT_CTRL(0xa) | | |
3767 | PHY_M_LEDC_STA1_CTRL(0xa) | | |
3768 | PHY_M_LEDC_STA0_CTRL(0xa)); | |
3769 | break; | |
3770 | case MO_LED_NORM: | |
3771 | gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, | |
3772 | PHY_M_LEDC_LOS_CTRL(1) | | |
3773 | PHY_M_LEDC_INIT_CTRL(8) | | |
3774 | PHY_M_LEDC_STA1_CTRL(7) | | |
3775 | PHY_M_LEDC_STA0_CTRL(7)); | |
3776 | } | |
793b883e | 3777 | |
a84d0a3d SH |
3778 | gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); |
3779 | } else | |
7d2e3cb7 | 3780 | gm_phy_write(hw, port, PHY_MARV_LED_OVER, |
a84d0a3d SH |
3781 | PHY_M_LED_MO_DUP(mode) | |
3782 | PHY_M_LED_MO_10(mode) | | |
3783 | PHY_M_LED_MO_100(mode) | | |
3784 | PHY_M_LED_MO_1000(mode) | | |
3785 | PHY_M_LED_MO_RX(mode) | | |
3786 | PHY_M_LED_MO_TX(mode)); | |
3787 | ||
3788 | spin_unlock_bh(&sky2->phy_lock); | |
cd28ab6a SH |
3789 | } |
3790 | ||
3791 | /* blink LED's for finding board */ | |
3792 | static int sky2_phys_id(struct net_device *dev, u32 data) | |
3793 | { | |
3794 | struct sky2_port *sky2 = netdev_priv(dev); | |
a84d0a3d | 3795 | unsigned int i; |
cd28ab6a | 3796 | |
a84d0a3d SH |
3797 | if (data == 0) |
3798 | data = UINT_MAX; | |
cd28ab6a | 3799 | |
a84d0a3d SH |
3800 | for (i = 0; i < data; i++) { |
3801 | sky2_led(sky2, MO_LED_ON); | |
3802 | if (msleep_interruptible(500)) | |
3803 | break; | |
3804 | sky2_led(sky2, MO_LED_OFF); | |
3805 | if (msleep_interruptible(500)) | |
3806 | break; | |
793b883e | 3807 | } |
a84d0a3d | 3808 | sky2_led(sky2, MO_LED_NORM); |
cd28ab6a SH |
3809 | |
3810 | return 0; | |
3811 | } | |
3812 | ||
3813 | static void sky2_get_pauseparam(struct net_device *dev, | |
3814 | struct ethtool_pauseparam *ecmd) | |
3815 | { | |
3816 | struct sky2_port *sky2 = netdev_priv(dev); | |
3817 | ||
16ad91e1 SH |
3818 | switch (sky2->flow_mode) { |
3819 | case FC_NONE: | |
3820 | ecmd->tx_pause = ecmd->rx_pause = 0; | |
3821 | break; | |
3822 | case FC_TX: | |
3823 | ecmd->tx_pause = 1, ecmd->rx_pause = 0; | |
3824 | break; | |
3825 | case FC_RX: | |
3826 | ecmd->tx_pause = 0, ecmd->rx_pause = 1; | |
3827 | break; | |
3828 | case FC_BOTH: | |
3829 | ecmd->tx_pause = ecmd->rx_pause = 1; | |
3830 | } | |
3831 | ||
0ea065e5 SH |
3832 | ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_PAUSE) |
3833 | ? AUTONEG_ENABLE : AUTONEG_DISABLE; | |
cd28ab6a SH |
3834 | } |
3835 | ||
3836 | static int sky2_set_pauseparam(struct net_device *dev, | |
3837 | struct ethtool_pauseparam *ecmd) | |
3838 | { | |
3839 | struct sky2_port *sky2 = netdev_priv(dev); | |
cd28ab6a | 3840 | |
0ea065e5 SH |
3841 | if (ecmd->autoneg == AUTONEG_ENABLE) |
3842 | sky2->flags |= SKY2_FLAG_AUTO_PAUSE; | |
3843 | else | |
3844 | sky2->flags &= ~SKY2_FLAG_AUTO_PAUSE; | |
3845 | ||
16ad91e1 | 3846 | sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause); |
cd28ab6a | 3847 | |
16ad91e1 SH |
3848 | if (netif_running(dev)) |
3849 | sky2_phy_reinit(sky2); | |
cd28ab6a | 3850 | |
2eaba1a2 | 3851 | return 0; |
cd28ab6a SH |
3852 | } |
3853 | ||
fb17358f SH |
3854 | static int sky2_get_coalesce(struct net_device *dev, |
3855 | struct ethtool_coalesce *ecmd) | |
3856 | { | |
3857 | struct sky2_port *sky2 = netdev_priv(dev); | |
3858 | struct sky2_hw *hw = sky2->hw; | |
3859 | ||
3860 | if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP) | |
3861 | ecmd->tx_coalesce_usecs = 0; | |
3862 | else { | |
3863 | u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI); | |
3864 | ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks); | |
3865 | } | |
3866 | ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH); | |
3867 | ||
3868 | if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP) | |
3869 | ecmd->rx_coalesce_usecs = 0; | |
3870 | else { | |
3871 | u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI); | |
3872 | ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks); | |
3873 | } | |
3874 | ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM); | |
3875 | ||
3876 | if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP) | |
3877 | ecmd->rx_coalesce_usecs_irq = 0; | |
3878 | else { | |
3879 | u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI); | |
3880 | ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks); | |
3881 | } | |
3882 | ||
3883 | ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM); | |
3884 | ||
3885 | return 0; | |
3886 | } | |
3887 | ||
3888 | /* Note: this affect both ports */ | |
3889 | static int sky2_set_coalesce(struct net_device *dev, | |
3890 | struct ethtool_coalesce *ecmd) | |
3891 | { | |
3892 | struct sky2_port *sky2 = netdev_priv(dev); | |
3893 | struct sky2_hw *hw = sky2->hw; | |
77b3d6a2 | 3894 | const u32 tmax = sky2_clk2us(hw, 0x0ffffff); |
fb17358f | 3895 | |
77b3d6a2 SH |
3896 | if (ecmd->tx_coalesce_usecs > tmax || |
3897 | ecmd->rx_coalesce_usecs > tmax || | |
3898 | ecmd->rx_coalesce_usecs_irq > tmax) | |
fb17358f SH |
3899 | return -EINVAL; |
3900 | ||
ee5f68fe | 3901 | if (ecmd->tx_max_coalesced_frames >= sky2->tx_ring_size-1) |
fb17358f | 3902 | return -EINVAL; |
ff81fbbe | 3903 | if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING) |
fb17358f | 3904 | return -EINVAL; |
ff81fbbe | 3905 | if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING) |
fb17358f SH |
3906 | return -EINVAL; |
3907 | ||
3908 | if (ecmd->tx_coalesce_usecs == 0) | |
3909 | sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); | |
3910 | else { | |
3911 | sky2_write32(hw, STAT_TX_TIMER_INI, | |
3912 | sky2_us2clk(hw, ecmd->tx_coalesce_usecs)); | |
3913 | sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); | |
3914 | } | |
3915 | sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames); | |
3916 | ||
3917 | if (ecmd->rx_coalesce_usecs == 0) | |
3918 | sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP); | |
3919 | else { | |
3920 | sky2_write32(hw, STAT_LEV_TIMER_INI, | |
3921 | sky2_us2clk(hw, ecmd->rx_coalesce_usecs)); | |
3922 | sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START); | |
3923 | } | |
3924 | sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames); | |
3925 | ||
3926 | if (ecmd->rx_coalesce_usecs_irq == 0) | |
3927 | sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP); | |
3928 | else { | |
d28d4870 | 3929 | sky2_write32(hw, STAT_ISR_TIMER_INI, |
fb17358f SH |
3930 | sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq)); |
3931 | sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); | |
3932 | } | |
3933 | sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq); | |
3934 | return 0; | |
3935 | } | |
3936 | ||
793b883e SH |
3937 | static void sky2_get_ringparam(struct net_device *dev, |
3938 | struct ethtool_ringparam *ering) | |
3939 | { | |
3940 | struct sky2_port *sky2 = netdev_priv(dev); | |
3941 | ||
3942 | ering->rx_max_pending = RX_MAX_PENDING; | |
3943 | ering->rx_mini_max_pending = 0; | |
3944 | ering->rx_jumbo_max_pending = 0; | |
ee5f68fe | 3945 | ering->tx_max_pending = TX_MAX_PENDING; |
793b883e SH |
3946 | |
3947 | ering->rx_pending = sky2->rx_pending; | |
3948 | ering->rx_mini_pending = 0; | |
3949 | ering->rx_jumbo_pending = 0; | |
3950 | ering->tx_pending = sky2->tx_pending; | |
3951 | } | |
3952 | ||
3953 | static int sky2_set_ringparam(struct net_device *dev, | |
3954 | struct ethtool_ringparam *ering) | |
3955 | { | |
3956 | struct sky2_port *sky2 = netdev_priv(dev); | |
793b883e SH |
3957 | |
3958 | if (ering->rx_pending > RX_MAX_PENDING || | |
3959 | ering->rx_pending < 8 || | |
ee5f68fe SH |
3960 | ering->tx_pending < TX_MIN_PENDING || |
3961 | ering->tx_pending > TX_MAX_PENDING) | |
793b883e SH |
3962 | return -EINVAL; |
3963 | ||
af18d8b8 | 3964 | sky2_detach(dev); |
793b883e SH |
3965 | |
3966 | sky2->rx_pending = ering->rx_pending; | |
3967 | sky2->tx_pending = ering->tx_pending; | |
ee5f68fe | 3968 | sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1); |
793b883e | 3969 | |
af18d8b8 | 3970 | return sky2_reattach(dev); |
793b883e SH |
3971 | } |
3972 | ||
793b883e SH |
3973 | static int sky2_get_regs_len(struct net_device *dev) |
3974 | { | |
6e4cbb34 | 3975 | return 0x4000; |
793b883e SH |
3976 | } |
3977 | ||
c32bbff8 MM |
3978 | static int sky2_reg_access_ok(struct sky2_hw *hw, unsigned int b) |
3979 | { | |
3980 | /* This complicated switch statement is to make sure and | |
3981 | * only access regions that are unreserved. | |
3982 | * Some blocks are only valid on dual port cards. | |
3983 | */ | |
3984 | switch (b) { | |
3985 | /* second port */ | |
3986 | case 5: /* Tx Arbiter 2 */ | |
3987 | case 9: /* RX2 */ | |
3988 | case 14 ... 15: /* TX2 */ | |
3989 | case 17: case 19: /* Ram Buffer 2 */ | |
3990 | case 22 ... 23: /* Tx Ram Buffer 2 */ | |
3991 | case 25: /* Rx MAC Fifo 1 */ | |
3992 | case 27: /* Tx MAC Fifo 2 */ | |
3993 | case 31: /* GPHY 2 */ | |
3994 | case 40 ... 47: /* Pattern Ram 2 */ | |
3995 | case 52: case 54: /* TCP Segmentation 2 */ | |
3996 | case 112 ... 116: /* GMAC 2 */ | |
3997 | return hw->ports > 1; | |
3998 | ||
3999 | case 0: /* Control */ | |
4000 | case 2: /* Mac address */ | |
4001 | case 4: /* Tx Arbiter 1 */ | |
4002 | case 7: /* PCI express reg */ | |
4003 | case 8: /* RX1 */ | |
4004 | case 12 ... 13: /* TX1 */ | |
4005 | case 16: case 18:/* Rx Ram Buffer 1 */ | |
4006 | case 20 ... 21: /* Tx Ram Buffer 1 */ | |
4007 | case 24: /* Rx MAC Fifo 1 */ | |
4008 | case 26: /* Tx MAC Fifo 1 */ | |
4009 | case 28 ... 29: /* Descriptor and status unit */ | |
4010 | case 30: /* GPHY 1*/ | |
4011 | case 32 ... 39: /* Pattern Ram 1 */ | |
4012 | case 48: case 50: /* TCP Segmentation 1 */ | |
4013 | case 56 ... 60: /* PCI space */ | |
4014 | case 80 ... 84: /* GMAC 1 */ | |
4015 | return 1; | |
4016 | ||
4017 | default: | |
4018 | return 0; | |
4019 | } | |
4020 | } | |
4021 | ||
793b883e SH |
4022 | /* |
4023 | * Returns copy of control register region | |
3ead5db7 | 4024 | * Note: ethtool_get_regs always provides full size (16k) buffer |
793b883e SH |
4025 | */ |
4026 | static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs, | |
4027 | void *p) | |
4028 | { | |
4029 | const struct sky2_port *sky2 = netdev_priv(dev); | |
793b883e | 4030 | const void __iomem *io = sky2->hw->regs; |
295b54c4 | 4031 | unsigned int b; |
793b883e SH |
4032 | |
4033 | regs->version = 1; | |
793b883e | 4034 | |
295b54c4 | 4035 | for (b = 0; b < 128; b++) { |
c32bbff8 MM |
4036 | /* skip poisonous diagnostic ram region in block 3 */ |
4037 | if (b == 3) | |
295b54c4 | 4038 | memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10); |
c32bbff8 | 4039 | else if (sky2_reg_access_ok(sky2->hw, b)) |
295b54c4 | 4040 | memcpy_fromio(p, io, 128); |
c32bbff8 | 4041 | else |
295b54c4 | 4042 | memset(p, 0, 128); |
3ead5db7 | 4043 | |
295b54c4 SH |
4044 | p += 128; |
4045 | io += 128; | |
4046 | } | |
793b883e | 4047 | } |
cd28ab6a | 4048 | |
b628ed98 SH |
4049 | /* In order to do Jumbo packets on these chips, need to turn off the |
4050 | * transmit store/forward. Therefore checksum offload won't work. | |
4051 | */ | |
4052 | static int no_tx_offload(struct net_device *dev) | |
4053 | { | |
4054 | const struct sky2_port *sky2 = netdev_priv(dev); | |
4055 | const struct sky2_hw *hw = sky2->hw; | |
4056 | ||
69161611 | 4057 | return dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U; |
b628ed98 SH |
4058 | } |
4059 | ||
4060 | static int sky2_set_tx_csum(struct net_device *dev, u32 data) | |
4061 | { | |
4062 | if (data && no_tx_offload(dev)) | |
4063 | return -EINVAL; | |
4064 | ||
4065 | return ethtool_op_set_tx_csum(dev, data); | |
4066 | } | |
4067 | ||
4068 | ||
4069 | static int sky2_set_tso(struct net_device *dev, u32 data) | |
4070 | { | |
4071 | if (data && no_tx_offload(dev)) | |
4072 | return -EINVAL; | |
4073 | ||
4074 | return ethtool_op_set_tso(dev, data); | |
4075 | } | |
4076 | ||
f4331a6d SH |
4077 | static int sky2_get_eeprom_len(struct net_device *dev) |
4078 | { | |
4079 | struct sky2_port *sky2 = netdev_priv(dev); | |
b32f40c4 | 4080 | struct sky2_hw *hw = sky2->hw; |
f4331a6d SH |
4081 | u16 reg2; |
4082 | ||
b32f40c4 | 4083 | reg2 = sky2_pci_read16(hw, PCI_DEV_REG2); |
f4331a6d SH |
4084 | return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8); |
4085 | } | |
4086 | ||
1413235c | 4087 | static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy) |
f4331a6d | 4088 | { |
1413235c | 4089 | unsigned long start = jiffies; |
f4331a6d | 4090 | |
1413235c SH |
4091 | while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) { |
4092 | /* Can take up to 10.6 ms for write */ | |
4093 | if (time_after(jiffies, start + HZ/4)) { | |
ada1db5c | 4094 | dev_err(&hw->pdev->dev, "VPD cycle timed out\n"); |
1413235c SH |
4095 | return -ETIMEDOUT; |
4096 | } | |
4097 | mdelay(1); | |
4098 | } | |
167f53d0 | 4099 | |
1413235c SH |
4100 | return 0; |
4101 | } | |
167f53d0 | 4102 | |
1413235c SH |
4103 | static int sky2_vpd_read(struct sky2_hw *hw, int cap, void *data, |
4104 | u16 offset, size_t length) | |
4105 | { | |
4106 | int rc = 0; | |
4107 | ||
4108 | while (length > 0) { | |
4109 | u32 val; | |
4110 | ||
4111 | sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset); | |
4112 | rc = sky2_vpd_wait(hw, cap, 0); | |
4113 | if (rc) | |
4114 | break; | |
4115 | ||
4116 | val = sky2_pci_read32(hw, cap + PCI_VPD_DATA); | |
4117 | ||
4118 | memcpy(data, &val, min(sizeof(val), length)); | |
4119 | offset += sizeof(u32); | |
4120 | data += sizeof(u32); | |
4121 | length -= sizeof(u32); | |
4122 | } | |
4123 | ||
4124 | return rc; | |
f4331a6d SH |
4125 | } |
4126 | ||
1413235c SH |
4127 | static int sky2_vpd_write(struct sky2_hw *hw, int cap, const void *data, |
4128 | u16 offset, unsigned int length) | |
f4331a6d | 4129 | { |
1413235c SH |
4130 | unsigned int i; |
4131 | int rc = 0; | |
4132 | ||
4133 | for (i = 0; i < length; i += sizeof(u32)) { | |
4134 | u32 val = *(u32 *)(data + i); | |
4135 | ||
4136 | sky2_pci_write32(hw, cap + PCI_VPD_DATA, val); | |
4137 | sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F); | |
4138 | ||
4139 | rc = sky2_vpd_wait(hw, cap, PCI_VPD_ADDR_F); | |
4140 | if (rc) | |
4141 | break; | |
4142 | } | |
4143 | return rc; | |
f4331a6d SH |
4144 | } |
4145 | ||
4146 | static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, | |
4147 | u8 *data) | |
4148 | { | |
4149 | struct sky2_port *sky2 = netdev_priv(dev); | |
4150 | int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD); | |
f4331a6d SH |
4151 | |
4152 | if (!cap) | |
4153 | return -EINVAL; | |
4154 | ||
4155 | eeprom->magic = SKY2_EEPROM_MAGIC; | |
4156 | ||
1413235c | 4157 | return sky2_vpd_read(sky2->hw, cap, data, eeprom->offset, eeprom->len); |
f4331a6d SH |
4158 | } |
4159 | ||
4160 | static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, | |
4161 | u8 *data) | |
4162 | { | |
4163 | struct sky2_port *sky2 = netdev_priv(dev); | |
4164 | int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD); | |
f4331a6d SH |
4165 | |
4166 | if (!cap) | |
4167 | return -EINVAL; | |
4168 | ||
4169 | if (eeprom->magic != SKY2_EEPROM_MAGIC) | |
4170 | return -EINVAL; | |
4171 | ||
1413235c SH |
4172 | /* Partial writes not supported */ |
4173 | if ((eeprom->offset & 3) || (eeprom->len & 3)) | |
4174 | return -EINVAL; | |
f4331a6d | 4175 | |
1413235c | 4176 | return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len); |
f4331a6d SH |
4177 | } |
4178 | ||
bf73130d SH |
4179 | static int sky2_set_flags(struct net_device *dev, u32 data) |
4180 | { | |
4181 | struct sky2_port *sky2 = netdev_priv(dev); | |
4182 | ||
4183 | if (data & ~ETH_FLAG_RXHASH) | |
4184 | return -EOPNOTSUPP; | |
4185 | ||
4186 | if (data & ETH_FLAG_RXHASH) { | |
4187 | if (sky2->hw->flags & SKY2_HW_RSS_BROKEN) | |
4188 | return -EINVAL; | |
4189 | ||
4190 | dev->features |= NETIF_F_RXHASH; | |
4191 | } else | |
4192 | dev->features &= ~NETIF_F_RXHASH; | |
4193 | ||
4194 | rx_set_rss(dev); | |
4195 | ||
4196 | return 0; | |
4197 | } | |
f4331a6d | 4198 | |
7282d491 | 4199 | static const struct ethtool_ops sky2_ethtool_ops = { |
f4331a6d SH |
4200 | .get_settings = sky2_get_settings, |
4201 | .set_settings = sky2_set_settings, | |
4202 | .get_drvinfo = sky2_get_drvinfo, | |
4203 | .get_wol = sky2_get_wol, | |
4204 | .set_wol = sky2_set_wol, | |
4205 | .get_msglevel = sky2_get_msglevel, | |
4206 | .set_msglevel = sky2_set_msglevel, | |
4207 | .nway_reset = sky2_nway_reset, | |
4208 | .get_regs_len = sky2_get_regs_len, | |
4209 | .get_regs = sky2_get_regs, | |
4210 | .get_link = ethtool_op_get_link, | |
4211 | .get_eeprom_len = sky2_get_eeprom_len, | |
4212 | .get_eeprom = sky2_get_eeprom, | |
4213 | .set_eeprom = sky2_set_eeprom, | |
f4331a6d | 4214 | .set_sg = ethtool_op_set_sg, |
f4331a6d | 4215 | .set_tx_csum = sky2_set_tx_csum, |
f4331a6d SH |
4216 | .set_tso = sky2_set_tso, |
4217 | .get_rx_csum = sky2_get_rx_csum, | |
4218 | .set_rx_csum = sky2_set_rx_csum, | |
4219 | .get_strings = sky2_get_strings, | |
4220 | .get_coalesce = sky2_get_coalesce, | |
4221 | .set_coalesce = sky2_set_coalesce, | |
4222 | .get_ringparam = sky2_get_ringparam, | |
4223 | .set_ringparam = sky2_set_ringparam, | |
cd28ab6a SH |
4224 | .get_pauseparam = sky2_get_pauseparam, |
4225 | .set_pauseparam = sky2_set_pauseparam, | |
f4331a6d | 4226 | .phys_id = sky2_phys_id, |
b9f2c044 | 4227 | .get_sset_count = sky2_get_sset_count, |
cd28ab6a | 4228 | .get_ethtool_stats = sky2_get_ethtool_stats, |
bf73130d | 4229 | .set_flags = sky2_set_flags, |
cd28ab6a SH |
4230 | }; |
4231 | ||
3cf26753 SH |
4232 | #ifdef CONFIG_SKY2_DEBUG |
4233 | ||
4234 | static struct dentry *sky2_debug; | |
4235 | ||
e4c2abe2 SH |
4236 | |
4237 | /* | |
4238 | * Read and parse the first part of Vital Product Data | |
4239 | */ | |
4240 | #define VPD_SIZE 128 | |
4241 | #define VPD_MAGIC 0x82 | |
4242 | ||
4243 | static const struct vpd_tag { | |
4244 | char tag[2]; | |
4245 | char *label; | |
4246 | } vpd_tags[] = { | |
4247 | { "PN", "Part Number" }, | |
4248 | { "EC", "Engineering Level" }, | |
4249 | { "MN", "Manufacturer" }, | |
4250 | { "SN", "Serial Number" }, | |
4251 | { "YA", "Asset Tag" }, | |
4252 | { "VL", "First Error Log Message" }, | |
4253 | { "VF", "Second Error Log Message" }, | |
4254 | { "VB", "Boot Agent ROM Configuration" }, | |
4255 | { "VE", "EFI UNDI Configuration" }, | |
4256 | }; | |
4257 | ||
4258 | static void sky2_show_vpd(struct seq_file *seq, struct sky2_hw *hw) | |
4259 | { | |
4260 | size_t vpd_size; | |
4261 | loff_t offs; | |
4262 | u8 len; | |
4263 | unsigned char *buf; | |
4264 | u16 reg2; | |
4265 | ||
4266 | reg2 = sky2_pci_read16(hw, PCI_DEV_REG2); | |
4267 | vpd_size = 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8); | |
4268 | ||
4269 | seq_printf(seq, "%s Product Data\n", pci_name(hw->pdev)); | |
4270 | buf = kmalloc(vpd_size, GFP_KERNEL); | |
4271 | if (!buf) { | |
4272 | seq_puts(seq, "no memory!\n"); | |
4273 | return; | |
4274 | } | |
4275 | ||
4276 | if (pci_read_vpd(hw->pdev, 0, vpd_size, buf) < 0) { | |
4277 | seq_puts(seq, "VPD read failed\n"); | |
4278 | goto out; | |
4279 | } | |
4280 | ||
4281 | if (buf[0] != VPD_MAGIC) { | |
4282 | seq_printf(seq, "VPD tag mismatch: %#x\n", buf[0]); | |
4283 | goto out; | |
4284 | } | |
4285 | len = buf[1]; | |
4286 | if (len == 0 || len > vpd_size - 4) { | |
4287 | seq_printf(seq, "Invalid id length: %d\n", len); | |
4288 | goto out; | |
4289 | } | |
4290 | ||
4291 | seq_printf(seq, "%.*s\n", len, buf + 3); | |
4292 | offs = len + 3; | |
4293 | ||
4294 | while (offs < vpd_size - 4) { | |
4295 | int i; | |
4296 | ||
4297 | if (!memcmp("RW", buf + offs, 2)) /* end marker */ | |
4298 | break; | |
4299 | len = buf[offs + 2]; | |
4300 | if (offs + len + 3 >= vpd_size) | |
4301 | break; | |
4302 | ||
4303 | for (i = 0; i < ARRAY_SIZE(vpd_tags); i++) { | |
4304 | if (!memcmp(vpd_tags[i].tag, buf + offs, 2)) { | |
4305 | seq_printf(seq, " %s: %.*s\n", | |
4306 | vpd_tags[i].label, len, buf + offs + 3); | |
4307 | break; | |
4308 | } | |
4309 | } | |
4310 | offs += len + 3; | |
4311 | } | |
4312 | out: | |
4313 | kfree(buf); | |
4314 | } | |
4315 | ||
3cf26753 SH |
4316 | static int sky2_debug_show(struct seq_file *seq, void *v) |
4317 | { | |
4318 | struct net_device *dev = seq->private; | |
4319 | const struct sky2_port *sky2 = netdev_priv(dev); | |
bea3348e | 4320 | struct sky2_hw *hw = sky2->hw; |
3cf26753 SH |
4321 | unsigned port = sky2->port; |
4322 | unsigned idx, last; | |
4323 | int sop; | |
4324 | ||
e4c2abe2 | 4325 | sky2_show_vpd(seq, hw); |
3cf26753 | 4326 | |
e4c2abe2 | 4327 | seq_printf(seq, "\nIRQ src=%x mask=%x control=%x\n", |
3cf26753 SH |
4328 | sky2_read32(hw, B0_ISRC), |
4329 | sky2_read32(hw, B0_IMSK), | |
4330 | sky2_read32(hw, B0_Y2_SP_ICR)); | |
4331 | ||
e4c2abe2 SH |
4332 | if (!netif_running(dev)) { |
4333 | seq_printf(seq, "network not running\n"); | |
4334 | return 0; | |
4335 | } | |
4336 | ||
bea3348e | 4337 | napi_disable(&hw->napi); |
3cf26753 SH |
4338 | last = sky2_read16(hw, STAT_PUT_IDX); |
4339 | ||
efe91932 | 4340 | seq_printf(seq, "Status ring %u\n", hw->st_size); |
3cf26753 SH |
4341 | if (hw->st_idx == last) |
4342 | seq_puts(seq, "Status ring (empty)\n"); | |
4343 | else { | |
4344 | seq_puts(seq, "Status ring\n"); | |
efe91932 | 4345 | for (idx = hw->st_idx; idx != last && idx < hw->st_size; |
4346 | idx = RING_NEXT(idx, hw->st_size)) { | |
3cf26753 SH |
4347 | const struct sky2_status_le *le = hw->st_le + idx; |
4348 | seq_printf(seq, "[%d] %#x %d %#x\n", | |
4349 | idx, le->opcode, le->length, le->status); | |
4350 | } | |
4351 | seq_puts(seq, "\n"); | |
4352 | } | |
4353 | ||
4354 | seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n", | |
4355 | sky2->tx_cons, sky2->tx_prod, | |
4356 | sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX), | |
4357 | sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE))); | |
4358 | ||
4359 | /* Dump contents of tx ring */ | |
4360 | sop = 1; | |
ee5f68fe SH |
4361 | for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; |
4362 | idx = RING_NEXT(idx, sky2->tx_ring_size)) { | |
3cf26753 SH |
4363 | const struct sky2_tx_le *le = sky2->tx_le + idx; |
4364 | u32 a = le32_to_cpu(le->addr); | |
4365 | ||
4366 | if (sop) | |
4367 | seq_printf(seq, "%u:", idx); | |
4368 | sop = 0; | |
4369 | ||
4370 | switch(le->opcode & ~HW_OWNER) { | |
4371 | case OP_ADDR64: | |
4372 | seq_printf(seq, " %#x:", a); | |
4373 | break; | |
4374 | case OP_LRGLEN: | |
4375 | seq_printf(seq, " mtu=%d", a); | |
4376 | break; | |
4377 | case OP_VLAN: | |
4378 | seq_printf(seq, " vlan=%d", be16_to_cpu(le->length)); | |
4379 | break; | |
4380 | case OP_TCPLISW: | |
4381 | seq_printf(seq, " csum=%#x", a); | |
4382 | break; | |
4383 | case OP_LARGESEND: | |
4384 | seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length)); | |
4385 | break; | |
4386 | case OP_PACKET: | |
4387 | seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length)); | |
4388 | break; | |
4389 | case OP_BUFFER: | |
4390 | seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length)); | |
4391 | break; | |
4392 | default: | |
4393 | seq_printf(seq, " op=%#x,%#x(%d)", le->opcode, | |
4394 | a, le16_to_cpu(le->length)); | |
4395 | } | |
4396 | ||
4397 | if (le->ctrl & EOP) { | |
4398 | seq_putc(seq, '\n'); | |
4399 | sop = 1; | |
4400 | } | |
4401 | } | |
4402 | ||
4403 | seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n", | |
4404 | sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)), | |
c409c34b | 4405 | sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)), |
3cf26753 SH |
4406 | sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX))); |
4407 | ||
d1d08d12 | 4408 | sky2_read32(hw, B0_Y2_SP_LISR); |
bea3348e | 4409 | napi_enable(&hw->napi); |
3cf26753 SH |
4410 | return 0; |
4411 | } | |
4412 | ||
4413 | static int sky2_debug_open(struct inode *inode, struct file *file) | |
4414 | { | |
4415 | return single_open(file, sky2_debug_show, inode->i_private); | |
4416 | } | |
4417 | ||
4418 | static const struct file_operations sky2_debug_fops = { | |
4419 | .owner = THIS_MODULE, | |
4420 | .open = sky2_debug_open, | |
4421 | .read = seq_read, | |
4422 | .llseek = seq_lseek, | |
4423 | .release = single_release, | |
4424 | }; | |
4425 | ||
4426 | /* | |
4427 | * Use network device events to create/remove/rename | |
4428 | * debugfs file entries | |
4429 | */ | |
4430 | static int sky2_device_event(struct notifier_block *unused, | |
4431 | unsigned long event, void *ptr) | |
4432 | { | |
4433 | struct net_device *dev = ptr; | |
5b296bc9 | 4434 | struct sky2_port *sky2 = netdev_priv(dev); |
3cf26753 | 4435 | |
1436b301 | 4436 | if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug) |
5b296bc9 | 4437 | return NOTIFY_DONE; |
3cf26753 | 4438 | |
5b296bc9 SH |
4439 | switch(event) { |
4440 | case NETDEV_CHANGENAME: | |
4441 | if (sky2->debugfs) { | |
4442 | sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs, | |
4443 | sky2_debug, dev->name); | |
4444 | } | |
4445 | break; | |
3cf26753 | 4446 | |
5b296bc9 SH |
4447 | case NETDEV_GOING_DOWN: |
4448 | if (sky2->debugfs) { | |
ada1db5c | 4449 | netdev_printk(KERN_DEBUG, dev, "remove debugfs\n"); |
5b296bc9 SH |
4450 | debugfs_remove(sky2->debugfs); |
4451 | sky2->debugfs = NULL; | |
3cf26753 | 4452 | } |
5b296bc9 SH |
4453 | break; |
4454 | ||
4455 | case NETDEV_UP: | |
4456 | sky2->debugfs = debugfs_create_file(dev->name, S_IRUGO, | |
4457 | sky2_debug, dev, | |
4458 | &sky2_debug_fops); | |
4459 | if (IS_ERR(sky2->debugfs)) | |
4460 | sky2->debugfs = NULL; | |
3cf26753 SH |
4461 | } |
4462 | ||
4463 | return NOTIFY_DONE; | |
4464 | } | |
4465 | ||
4466 | static struct notifier_block sky2_notifier = { | |
4467 | .notifier_call = sky2_device_event, | |
4468 | }; | |
4469 | ||
4470 | ||
4471 | static __init void sky2_debug_init(void) | |
4472 | { | |
4473 | struct dentry *ent; | |
4474 | ||
4475 | ent = debugfs_create_dir("sky2", NULL); | |
4476 | if (!ent || IS_ERR(ent)) | |
4477 | return; | |
4478 | ||
4479 | sky2_debug = ent; | |
4480 | register_netdevice_notifier(&sky2_notifier); | |
4481 | } | |
4482 | ||
4483 | static __exit void sky2_debug_cleanup(void) | |
4484 | { | |
4485 | if (sky2_debug) { | |
4486 | unregister_netdevice_notifier(&sky2_notifier); | |
4487 | debugfs_remove(sky2_debug); | |
4488 | sky2_debug = NULL; | |
4489 | } | |
4490 | } | |
4491 | ||
4492 | #else | |
4493 | #define sky2_debug_init() | |
4494 | #define sky2_debug_cleanup() | |
4495 | #endif | |
4496 | ||
1436b301 SH |
4497 | /* Two copies of network device operations to handle special case of |
4498 | not allowing netpoll on second port */ | |
4499 | static const struct net_device_ops sky2_netdev_ops[2] = { | |
4500 | { | |
4501 | .ndo_open = sky2_up, | |
4502 | .ndo_stop = sky2_down, | |
00829823 | 4503 | .ndo_start_xmit = sky2_xmit_frame, |
1436b301 SH |
4504 | .ndo_do_ioctl = sky2_ioctl, |
4505 | .ndo_validate_addr = eth_validate_addr, | |
4506 | .ndo_set_mac_address = sky2_set_mac_address, | |
4507 | .ndo_set_multicast_list = sky2_set_multicast, | |
4508 | .ndo_change_mtu = sky2_change_mtu, | |
4509 | .ndo_tx_timeout = sky2_tx_timeout, | |
4510 | #ifdef SKY2_VLAN_TAG_USED | |
4511 | .ndo_vlan_rx_register = sky2_vlan_rx_register, | |
4512 | #endif | |
4513 | #ifdef CONFIG_NET_POLL_CONTROLLER | |
4514 | .ndo_poll_controller = sky2_netpoll, | |
4515 | #endif | |
4516 | }, | |
4517 | { | |
4518 | .ndo_open = sky2_up, | |
4519 | .ndo_stop = sky2_down, | |
00829823 | 4520 | .ndo_start_xmit = sky2_xmit_frame, |
1436b301 SH |
4521 | .ndo_do_ioctl = sky2_ioctl, |
4522 | .ndo_validate_addr = eth_validate_addr, | |
4523 | .ndo_set_mac_address = sky2_set_mac_address, | |
4524 | .ndo_set_multicast_list = sky2_set_multicast, | |
4525 | .ndo_change_mtu = sky2_change_mtu, | |
4526 | .ndo_tx_timeout = sky2_tx_timeout, | |
4527 | #ifdef SKY2_VLAN_TAG_USED | |
4528 | .ndo_vlan_rx_register = sky2_vlan_rx_register, | |
4529 | #endif | |
4530 | }, | |
4531 | }; | |
3cf26753 | 4532 | |
cd28ab6a SH |
4533 | /* Initialize network device */ |
4534 | static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, | |
e3173832 | 4535 | unsigned port, |
be63a21c | 4536 | int highmem, int wol) |
cd28ab6a SH |
4537 | { |
4538 | struct sky2_port *sky2; | |
4539 | struct net_device *dev = alloc_etherdev(sizeof(*sky2)); | |
4540 | ||
4541 | if (!dev) { | |
898eb71c | 4542 | dev_err(&hw->pdev->dev, "etherdev alloc failed\n"); |
cd28ab6a SH |
4543 | return NULL; |
4544 | } | |
4545 | ||
cd28ab6a | 4546 | SET_NETDEV_DEV(dev, &hw->pdev->dev); |
ef743d33 | 4547 | dev->irq = hw->pdev->irq; |
cd28ab6a | 4548 | SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops); |
cd28ab6a | 4549 | dev->watchdog_timeo = TX_WATCHDOG; |
1436b301 | 4550 | dev->netdev_ops = &sky2_netdev_ops[port]; |
cd28ab6a SH |
4551 | |
4552 | sky2 = netdev_priv(dev); | |
4553 | sky2->netdev = dev; | |
4554 | sky2->hw = hw; | |
4555 | sky2->msg_enable = netif_msg_init(debug, default_msg); | |
4556 | ||
cd28ab6a | 4557 | /* Auto speed and flow control */ |
0ea065e5 SH |
4558 | sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE; |
4559 | if (hw->chip_id != CHIP_ID_YUKON_XL) | |
4560 | sky2->flags |= SKY2_FLAG_RX_CHECKSUM; | |
4561 | ||
16ad91e1 SH |
4562 | sky2->flow_mode = FC_BOTH; |
4563 | ||
cd28ab6a SH |
4564 | sky2->duplex = -1; |
4565 | sky2->speed = -1; | |
4566 | sky2->advertising = sky2_supported_modes(hw); | |
be63a21c | 4567 | sky2->wol = wol; |
75d070c5 | 4568 | |
e07b1aa8 | 4569 | spin_lock_init(&sky2->phy_lock); |
ee5f68fe | 4570 | |
793b883e | 4571 | sky2->tx_pending = TX_DEF_PENDING; |
ee5f68fe | 4572 | sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1); |
290d4de5 | 4573 | sky2->rx_pending = RX_DEF_PENDING; |
cd28ab6a SH |
4574 | |
4575 | hw->dev[port] = dev; | |
4576 | ||
4577 | sky2->port = port; | |
4578 | ||
4a50a876 | 4579 | dev->features |= NETIF_F_TSO | NETIF_F_IP_CSUM | NETIF_F_SG; |
cd28ab6a SH |
4580 | if (highmem) |
4581 | dev->features |= NETIF_F_HIGHDMA; | |
cd28ab6a | 4582 | |
bf73130d SH |
4583 | /* Enable receive hashing unless hardware is known broken */ |
4584 | if (!(hw->flags & SKY2_HW_RSS_BROKEN)) | |
4585 | dev->features |= NETIF_F_RXHASH; | |
4586 | ||
d1f13708 | 4587 | #ifdef SKY2_VLAN_TAG_USED |
d6c9bc1e SH |
4588 | /* The workaround for FE+ status conflicts with VLAN tag detection. */ |
4589 | if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P && | |
4590 | sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) { | |
4591 | dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; | |
d6c9bc1e | 4592 | } |
d1f13708 SH |
4593 | #endif |
4594 | ||
cd28ab6a | 4595 | /* read the mac address */ |
793b883e | 4596 | memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); |
2995bfb7 | 4597 | memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); |
cd28ab6a | 4598 | |
cd28ab6a SH |
4599 | return dev; |
4600 | } | |
4601 | ||
28bd181a | 4602 | static void __devinit sky2_show_addr(struct net_device *dev) |
cd28ab6a SH |
4603 | { |
4604 | const struct sky2_port *sky2 = netdev_priv(dev); | |
4605 | ||
6c35abae | 4606 | netif_info(sky2, probe, dev, "addr %pM\n", dev->dev_addr); |
cd28ab6a SH |
4607 | } |
4608 | ||
fb2690a9 | 4609 | /* Handle software interrupt used during MSI test */ |
7d12e780 | 4610 | static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id) |
fb2690a9 SH |
4611 | { |
4612 | struct sky2_hw *hw = dev_id; | |
4613 | u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2); | |
4614 | ||
4615 | if (status == 0) | |
4616 | return IRQ_NONE; | |
4617 | ||
4618 | if (status & Y2_IS_IRQ_SW) { | |
ea76e635 | 4619 | hw->flags |= SKY2_HW_USE_MSI; |
fb2690a9 SH |
4620 | wake_up(&hw->msi_wait); |
4621 | sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); | |
4622 | } | |
4623 | sky2_write32(hw, B0_Y2_SP_ICR, 2); | |
4624 | ||
4625 | return IRQ_HANDLED; | |
4626 | } | |
4627 | ||
4628 | /* Test interrupt path by forcing a a software IRQ */ | |
4629 | static int __devinit sky2_test_msi(struct sky2_hw *hw) | |
4630 | { | |
4631 | struct pci_dev *pdev = hw->pdev; | |
4632 | int err; | |
4633 | ||
bb507fe1 SH |
4634 | init_waitqueue_head (&hw->msi_wait); |
4635 | ||
fb2690a9 SH |
4636 | sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW); |
4637 | ||
b0a20ded | 4638 | err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw); |
fb2690a9 | 4639 | if (err) { |
b02a9258 | 4640 | dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); |
fb2690a9 SH |
4641 | return err; |
4642 | } | |
4643 | ||
fb2690a9 | 4644 | sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); |
bb507fe1 | 4645 | sky2_read8(hw, B0_CTST); |
fb2690a9 | 4646 | |
ea76e635 | 4647 | wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10); |
fb2690a9 | 4648 | |
ea76e635 | 4649 | if (!(hw->flags & SKY2_HW_USE_MSI)) { |
fb2690a9 | 4650 | /* MSI test failed, go back to INTx mode */ |
b02a9258 SH |
4651 | dev_info(&pdev->dev, "No interrupt generated using MSI, " |
4652 | "switching to INTx mode.\n"); | |
fb2690a9 SH |
4653 | |
4654 | err = -EOPNOTSUPP; | |
4655 | sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); | |
4656 | } | |
4657 | ||
4658 | sky2_write32(hw, B0_IMSK, 0); | |
2bffc23a | 4659 | sky2_read32(hw, B0_IMSK); |
fb2690a9 SH |
4660 | |
4661 | free_irq(pdev->irq, hw); | |
4662 | ||
4663 | return err; | |
4664 | } | |
4665 | ||
c7127a34 SH |
4666 | /* This driver supports yukon2 chipset only */ |
4667 | static const char *sky2_name(u8 chipid, char *buf, int sz) | |
4668 | { | |
4669 | const char *name[] = { | |
4670 | "XL", /* 0xb3 */ | |
4671 | "EC Ultra", /* 0xb4 */ | |
4672 | "Extreme", /* 0xb5 */ | |
4673 | "EC", /* 0xb6 */ | |
4674 | "FE", /* 0xb7 */ | |
4675 | "FE+", /* 0xb8 */ | |
4676 | "Supreme", /* 0xb9 */ | |
0ce8b98d | 4677 | "UL 2", /* 0xba */ |
0f5aac70 SH |
4678 | "Unknown", /* 0xbb */ |
4679 | "Optima", /* 0xbc */ | |
c7127a34 SH |
4680 | }; |
4681 | ||
dae3a511 | 4682 | if (chipid >= CHIP_ID_YUKON_XL && chipid <= CHIP_ID_YUKON_OPT) |
c7127a34 SH |
4683 | strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz); |
4684 | else | |
4685 | snprintf(buf, sz, "(chip %#x)", chipid); | |
4686 | return buf; | |
4687 | } | |
4688 | ||
cd28ab6a SH |
4689 | static int __devinit sky2_probe(struct pci_dev *pdev, |
4690 | const struct pci_device_id *ent) | |
4691 | { | |
7f60c64b | 4692 | struct net_device *dev; |
cd28ab6a | 4693 | struct sky2_hw *hw; |
be63a21c | 4694 | int err, using_dac = 0, wol_default; |
3834507d | 4695 | u32 reg; |
c7127a34 | 4696 | char buf1[16]; |
cd28ab6a | 4697 | |
793b883e SH |
4698 | err = pci_enable_device(pdev); |
4699 | if (err) { | |
b02a9258 | 4700 | dev_err(&pdev->dev, "cannot enable PCI device\n"); |
cd28ab6a SH |
4701 | goto err_out; |
4702 | } | |
4703 | ||
6cc90a5a SH |
4704 | /* Get configuration information |
4705 | * Note: only regular PCI config access once to test for HW issues | |
4706 | * other PCI access through shared memory for speed and to | |
4707 | * avoid MMCONFIG problems. | |
4708 | */ | |
4709 | err = pci_read_config_dword(pdev, PCI_DEV_REG2, ®); | |
4710 | if (err) { | |
4711 | dev_err(&pdev->dev, "PCI read config failed\n"); | |
4712 | goto err_out; | |
4713 | } | |
4714 | ||
4715 | if (~reg == 0) { | |
4716 | dev_err(&pdev->dev, "PCI configuration read error\n"); | |
4717 | goto err_out; | |
4718 | } | |
4719 | ||
793b883e SH |
4720 | err = pci_request_regions(pdev, DRV_NAME); |
4721 | if (err) { | |
b02a9258 | 4722 | dev_err(&pdev->dev, "cannot obtain PCI resources\n"); |
44a1d2e5 | 4723 | goto err_out_disable; |
cd28ab6a SH |
4724 | } |
4725 | ||
4726 | pci_set_master(pdev); | |
4727 | ||
d1f3d4dd | 4728 | if (sizeof(dma_addr_t) > sizeof(u32) && |
6a35528a | 4729 | !(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))) { |
d1f3d4dd | 4730 | using_dac = 1; |
6a35528a | 4731 | err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); |
d1f3d4dd | 4732 | if (err < 0) { |
b02a9258 SH |
4733 | dev_err(&pdev->dev, "unable to obtain 64 bit DMA " |
4734 | "for consistent allocations\n"); | |
d1f3d4dd SH |
4735 | goto err_out_free_regions; |
4736 | } | |
d1f3d4dd | 4737 | } else { |
284901a9 | 4738 | err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
cd28ab6a | 4739 | if (err) { |
b02a9258 | 4740 | dev_err(&pdev->dev, "no usable DMA configuration\n"); |
cd28ab6a SH |
4741 | goto err_out_free_regions; |
4742 | } | |
4743 | } | |
d1f3d4dd | 4744 | |
3834507d SH |
4745 | |
4746 | #ifdef __BIG_ENDIAN | |
4747 | /* The sk98lin vendor driver uses hardware byte swapping but | |
4748 | * this driver uses software swapping. | |
4749 | */ | |
4750 | reg &= ~PCI_REV_DESC; | |
4751 | err = pci_write_config_dword(pdev,PCI_DEV_REG2, reg); | |
4752 | if (err) { | |
4753 | dev_err(&pdev->dev, "PCI write config failed\n"); | |
4754 | goto err_out_free_regions; | |
4755 | } | |
4756 | #endif | |
4757 | ||
9d731d77 | 4758 | wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0; |
be63a21c | 4759 | |
cd28ab6a | 4760 | err = -ENOMEM; |
66466797 SH |
4761 | |
4762 | hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:") | |
4763 | + strlen(pci_name(pdev)) + 1, GFP_KERNEL); | |
cd28ab6a | 4764 | if (!hw) { |
b02a9258 | 4765 | dev_err(&pdev->dev, "cannot allocate hardware struct\n"); |
cd28ab6a SH |
4766 | goto err_out_free_regions; |
4767 | } | |
4768 | ||
cd28ab6a | 4769 | hw->pdev = pdev; |
66466797 | 4770 | sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev)); |
cd28ab6a SH |
4771 | |
4772 | hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); | |
4773 | if (!hw->regs) { | |
b02a9258 | 4774 | dev_err(&pdev->dev, "cannot map device registers\n"); |
cd28ab6a SH |
4775 | goto err_out_free_hw; |
4776 | } | |
4777 | ||
e3173832 | 4778 | err = sky2_init(hw); |
cd28ab6a | 4779 | if (err) |
793b883e | 4780 | goto err_out_iounmap; |
cd28ab6a | 4781 | |
efe91932 | 4782 | /* ring for status responses */ |
bf73130d | 4783 | hw->st_size = hw->ports * roundup_pow_of_two(3*RX_MAX_PENDING + TX_MAX_PENDING); |
efe91932 | 4784 | hw->st_le = pci_alloc_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le), |
4785 | &hw->st_dma); | |
4786 | if (!hw->st_le) | |
4787 | goto err_out_reset; | |
4788 | ||
c844d483 SH |
4789 | dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n", |
4790 | sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev); | |
cd28ab6a | 4791 | |
e3173832 SH |
4792 | sky2_reset(hw); |
4793 | ||
be63a21c | 4794 | dev = sky2_init_netdev(hw, 0, using_dac, wol_default); |
7f60c64b | 4795 | if (!dev) { |
4796 | err = -ENOMEM; | |
cd28ab6a | 4797 | goto err_out_free_pci; |
7f60c64b | 4798 | } |
cd28ab6a | 4799 | |
9fa1b1f3 SH |
4800 | if (!disable_msi && pci_enable_msi(pdev) == 0) { |
4801 | err = sky2_test_msi(hw); | |
4802 | if (err == -EOPNOTSUPP) | |
4803 | pci_disable_msi(pdev); | |
4804 | else if (err) | |
4805 | goto err_out_free_netdev; | |
4806 | } | |
4807 | ||
793b883e SH |
4808 | err = register_netdev(dev); |
4809 | if (err) { | |
b02a9258 | 4810 | dev_err(&pdev->dev, "cannot register net device\n"); |
cd28ab6a SH |
4811 | goto err_out_free_netdev; |
4812 | } | |
4813 | ||
33cb7d33 BP |
4814 | netif_carrier_off(dev); |
4815 | ||
6de16237 SH |
4816 | netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT); |
4817 | ||
ea76e635 SH |
4818 | err = request_irq(pdev->irq, sky2_intr, |
4819 | (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED, | |
66466797 | 4820 | hw->irq_name, hw); |
9fa1b1f3 | 4821 | if (err) { |
b02a9258 | 4822 | dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); |
9fa1b1f3 SH |
4823 | goto err_out_unregister; |
4824 | } | |
4825 | sky2_write32(hw, B0_IMSK, Y2_IS_BASE); | |
6de16237 | 4826 | napi_enable(&hw->napi); |
9fa1b1f3 | 4827 | |
cd28ab6a SH |
4828 | sky2_show_addr(dev); |
4829 | ||
7f60c64b | 4830 | if (hw->ports > 1) { |
4831 | struct net_device *dev1; | |
4832 | ||
ca519274 | 4833 | err = -ENOMEM; |
be63a21c | 4834 | dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default); |
ca519274 SH |
4835 | if (dev1 && (err = register_netdev(dev1)) == 0) |
4836 | sky2_show_addr(dev1); | |
4837 | else { | |
b02a9258 SH |
4838 | dev_warn(&pdev->dev, |
4839 | "register of second port failed (%d)\n", err); | |
cd28ab6a | 4840 | hw->dev[1] = NULL; |
ca519274 SH |
4841 | hw->ports = 1; |
4842 | if (dev1) | |
4843 | free_netdev(dev1); | |
4844 | } | |
cd28ab6a SH |
4845 | } |
4846 | ||
32c2c300 | 4847 | setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw); |
81906791 SH |
4848 | INIT_WORK(&hw->restart_work, sky2_restart); |
4849 | ||
793b883e | 4850 | pci_set_drvdata(pdev, hw); |
1ae861e6 | 4851 | pdev->d3_delay = 150; |
793b883e | 4852 | |
cd28ab6a SH |
4853 | return 0; |
4854 | ||
793b883e | 4855 | err_out_unregister: |
ea76e635 | 4856 | if (hw->flags & SKY2_HW_USE_MSI) |
b0a20ded | 4857 | pci_disable_msi(pdev); |
793b883e | 4858 | unregister_netdev(dev); |
cd28ab6a SH |
4859 | err_out_free_netdev: |
4860 | free_netdev(dev); | |
cd28ab6a | 4861 | err_out_free_pci: |
efe91932 | 4862 | pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le), |
4863 | hw->st_le, hw->st_dma); | |
4864 | err_out_reset: | |
793b883e | 4865 | sky2_write8(hw, B0_CTST, CS_RST_SET); |
cd28ab6a SH |
4866 | err_out_iounmap: |
4867 | iounmap(hw->regs); | |
4868 | err_out_free_hw: | |
4869 | kfree(hw); | |
4870 | err_out_free_regions: | |
4871 | pci_release_regions(pdev); | |
44a1d2e5 | 4872 | err_out_disable: |
cd28ab6a | 4873 | pci_disable_device(pdev); |
cd28ab6a | 4874 | err_out: |
549a68c3 | 4875 | pci_set_drvdata(pdev, NULL); |
cd28ab6a SH |
4876 | return err; |
4877 | } | |
4878 | ||
4879 | static void __devexit sky2_remove(struct pci_dev *pdev) | |
4880 | { | |
793b883e | 4881 | struct sky2_hw *hw = pci_get_drvdata(pdev); |
6de16237 | 4882 | int i; |
cd28ab6a | 4883 | |
793b883e | 4884 | if (!hw) |
cd28ab6a SH |
4885 | return; |
4886 | ||
32c2c300 | 4887 | del_timer_sync(&hw->watchdog_timer); |
6de16237 | 4888 | cancel_work_sync(&hw->restart_work); |
d27ed387 | 4889 | |
b877fe28 | 4890 | for (i = hw->ports-1; i >= 0; --i) |
6de16237 | 4891 | unregister_netdev(hw->dev[i]); |
81906791 | 4892 | |
d27ed387 | 4893 | sky2_write32(hw, B0_IMSK, 0); |
cd28ab6a | 4894 | |
ae306cca SH |
4895 | sky2_power_aux(hw); |
4896 | ||
793b883e | 4897 | sky2_write8(hw, B0_CTST, CS_RST_SET); |
5afa0a9c | 4898 | sky2_read8(hw, B0_CTST); |
cd28ab6a SH |
4899 | |
4900 | free_irq(pdev->irq, hw); | |
ea76e635 | 4901 | if (hw->flags & SKY2_HW_USE_MSI) |
b0a20ded | 4902 | pci_disable_msi(pdev); |
efe91932 | 4903 | pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le), |
4904 | hw->st_le, hw->st_dma); | |
cd28ab6a SH |
4905 | pci_release_regions(pdev); |
4906 | pci_disable_device(pdev); | |
793b883e | 4907 | |
b877fe28 | 4908 | for (i = hw->ports-1; i >= 0; --i) |
6de16237 SH |
4909 | free_netdev(hw->dev[i]); |
4910 | ||
cd28ab6a SH |
4911 | iounmap(hw->regs); |
4912 | kfree(hw); | |
5afa0a9c | 4913 | |
cd28ab6a SH |
4914 | pci_set_drvdata(pdev, NULL); |
4915 | } | |
4916 | ||
cd28ab6a SH |
4917 | static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) |
4918 | { | |
793b883e | 4919 | struct sky2_hw *hw = pci_get_drvdata(pdev); |
e3173832 | 4920 | int i, wol = 0; |
cd28ab6a | 4921 | |
549a68c3 SH |
4922 | if (!hw) |
4923 | return 0; | |
4924 | ||
063a0b38 SH |
4925 | del_timer_sync(&hw->watchdog_timer); |
4926 | cancel_work_sync(&hw->restart_work); | |
4927 | ||
19720737 | 4928 | rtnl_lock(); |
f05267e7 | 4929 | for (i = 0; i < hw->ports; i++) { |
cd28ab6a | 4930 | struct net_device *dev = hw->dev[i]; |
e3173832 | 4931 | struct sky2_port *sky2 = netdev_priv(dev); |
cd28ab6a | 4932 | |
af18d8b8 | 4933 | sky2_detach(dev); |
e3173832 SH |
4934 | |
4935 | if (sky2->wol) | |
4936 | sky2_wol_init(sky2); | |
4937 | ||
4938 | wol |= sky2->wol; | |
cd28ab6a SH |
4939 | } |
4940 | ||
5f8ae5c5 | 4941 | device_set_wakeup_enable(&pdev->dev, wol != 0); |
4942 | ||
8ab8fca2 | 4943 | sky2_write32(hw, B0_IMSK, 0); |
6de16237 | 4944 | napi_disable(&hw->napi); |
ae306cca | 4945 | sky2_power_aux(hw); |
19720737 | 4946 | rtnl_unlock(); |
e3173832 | 4947 | |
d374c1c1 | 4948 | pci_save_state(pdev); |
e3173832 | 4949 | pci_enable_wake(pdev, pci_choose_state(pdev, state), wol); |
f71eb1a2 | 4950 | pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
ae306cca | 4951 | |
2ccc99b7 | 4952 | return 0; |
cd28ab6a SH |
4953 | } |
4954 | ||
5f8ae5c5 | 4955 | #ifdef CONFIG_PM |
cd28ab6a SH |
4956 | static int sky2_resume(struct pci_dev *pdev) |
4957 | { | |
793b883e | 4958 | struct sky2_hw *hw = pci_get_drvdata(pdev); |
08c06d8a | 4959 | int i, err; |
cd28ab6a | 4960 | |
549a68c3 SH |
4961 | if (!hw) |
4962 | return 0; | |
4963 | ||
2a400189 | 4964 | rtnl_lock(); |
f71eb1a2 SH |
4965 | err = pci_set_power_state(pdev, PCI_D0); |
4966 | if (err) | |
4967 | goto out; | |
ae306cca SH |
4968 | |
4969 | err = pci_restore_state(pdev); | |
4970 | if (err) | |
4971 | goto out; | |
4972 | ||
cd28ab6a | 4973 | pci_enable_wake(pdev, PCI_D0, 0); |
1ad5b4a5 SH |
4974 | |
4975 | /* Re-enable all clocks */ | |
a0db28b8 | 4976 | err = pci_write_config_dword(pdev, PCI_DEV_REG3, 0); |
4977 | if (err) { | |
4978 | dev_err(&pdev->dev, "PCI write config failed\n"); | |
4979 | goto out; | |
4980 | } | |
1ad5b4a5 | 4981 | |
e3173832 | 4982 | sky2_reset(hw); |
8ab8fca2 | 4983 | sky2_write32(hw, B0_IMSK, Y2_IS_BASE); |
6de16237 | 4984 | napi_enable(&hw->napi); |
8ab8fca2 | 4985 | |
f05267e7 | 4986 | for (i = 0; i < hw->ports; i++) { |
af18d8b8 SH |
4987 | err = sky2_reattach(hw->dev[i]); |
4988 | if (err) | |
4989 | goto out; | |
cd28ab6a | 4990 | } |
af18d8b8 | 4991 | rtnl_unlock(); |
eb35cf60 | 4992 | |
ae306cca | 4993 | return 0; |
08c06d8a | 4994 | out: |
af18d8b8 SH |
4995 | rtnl_unlock(); |
4996 | ||
b02a9258 | 4997 | dev_err(&pdev->dev, "resume failed (%d)\n", err); |
ae306cca | 4998 | pci_disable_device(pdev); |
08c06d8a | 4999 | return err; |
cd28ab6a SH |
5000 | } |
5001 | #endif | |
5002 | ||
e3173832 SH |
5003 | static void sky2_shutdown(struct pci_dev *pdev) |
5004 | { | |
5f8ae5c5 | 5005 | sky2_suspend(pdev, PMSG_SUSPEND); |
e3173832 SH |
5006 | } |
5007 | ||
cd28ab6a | 5008 | static struct pci_driver sky2_driver = { |
793b883e SH |
5009 | .name = DRV_NAME, |
5010 | .id_table = sky2_id_table, | |
5011 | .probe = sky2_probe, | |
5012 | .remove = __devexit_p(sky2_remove), | |
cd28ab6a | 5013 | #ifdef CONFIG_PM |
793b883e SH |
5014 | .suspend = sky2_suspend, |
5015 | .resume = sky2_resume, | |
cd28ab6a | 5016 | #endif |
e3173832 | 5017 | .shutdown = sky2_shutdown, |
cd28ab6a SH |
5018 | }; |
5019 | ||
5020 | static int __init sky2_init_module(void) | |
5021 | { | |
ada1db5c | 5022 | pr_info("driver version " DRV_VERSION "\n"); |
c844d483 | 5023 | |
3cf26753 | 5024 | sky2_debug_init(); |
50241c4c | 5025 | return pci_register_driver(&sky2_driver); |
cd28ab6a SH |
5026 | } |
5027 | ||
5028 | static void __exit sky2_cleanup_module(void) | |
5029 | { | |
5030 | pci_unregister_driver(&sky2_driver); | |
3cf26753 | 5031 | sky2_debug_cleanup(); |
cd28ab6a SH |
5032 | } |
5033 | ||
5034 | module_init(sky2_init_module); | |
5035 | module_exit(sky2_cleanup_module); | |
5036 | ||
5037 | MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver"); | |
65ebe634 | 5038 | MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>"); |
cd28ab6a | 5039 | MODULE_LICENSE("GPL"); |
5f4f9dc1 | 5040 | MODULE_VERSION(DRV_VERSION); |