]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * This program is free software; you can redistribute it and/or | |
3 | * modify it under the terms of the GNU General Public License | |
4 | * as published by the Free Software Foundation; either version | |
5 | * 2 of the License, or (at your option) any later version. | |
6 | * | |
7 | * (c) Copyright 1998 Alan Cox <alan@lxorguk.ukuu.org.uk> | |
8 | * (c) Copyright 2000, 2001 Red Hat Inc | |
9 | * | |
10 | * Development of this driver was funded by Equiinet Ltd | |
11 | * http://www.equiinet.com | |
12 | * | |
13 | * ChangeLog: | |
14 | * | |
15 | * Asynchronous mode dropped for 2.2. For 2.5 we will attempt the | |
16 | * unification of all the Z85x30 asynchronous drivers for real. | |
17 | * | |
18 | * DMA now uses get_free_page as kmalloc buffers may span a 64K | |
19 | * boundary. | |
20 | * | |
113aa838 AC |
21 | * Modified for SMP safety and SMP locking by Alan Cox |
22 | * <alan@lxorguk.ukuu.org.uk> | |
1da177e4 LT |
23 | * |
24 | * Performance | |
25 | * | |
26 | * Z85230: | |
27 | * Non DMA you want a 486DX50 or better to do 64Kbits. 9600 baud | |
28 | * X.25 is not unrealistic on all machines. DMA mode can in theory | |
29 | * handle T1/E1 quite nicely. In practice the limit seems to be about | |
30 | * 512Kbit->1Mbit depending on motherboard. | |
31 | * | |
32 | * Z85C30: | |
33 | * 64K will take DMA, 9600 baud X.25 should be ok. | |
34 | * | |
35 | * Z8530: | |
36 | * Synchronous mode without DMA is unlikely to pass about 2400 baud. | |
37 | */ | |
38 | ||
23efcb73 JP |
39 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
40 | ||
1da177e4 LT |
41 | #include <linux/module.h> |
42 | #include <linux/kernel.h> | |
43 | #include <linux/mm.h> | |
44 | #include <linux/net.h> | |
45 | #include <linux/skbuff.h> | |
46 | #include <linux/netdevice.h> | |
47 | #include <linux/if_arp.h> | |
48 | #include <linux/delay.h> | |
52e8a6a2 | 49 | #include <linux/hdlc.h> |
1da177e4 LT |
50 | #include <linux/ioport.h> |
51 | #include <linux/init.h> | |
5a0e3ad6 | 52 | #include <linux/gfp.h> |
1da177e4 LT |
53 | #include <asm/dma.h> |
54 | #include <asm/io.h> | |
55 | #define RT_LOCK | |
56 | #define RT_UNLOCK | |
57 | #include <linux/spinlock.h> | |
58 | ||
1da177e4 LT |
59 | #include "z85230.h" |
60 | ||
61 | ||
62 | /** | |
63 | * z8530_read_port - Architecture specific interface function | |
64 | * @p: port to read | |
65 | * | |
66 | * Provided port access methods. The Comtrol SV11 requires no delays | |
67 | * between accesses and uses PC I/O. Some drivers may need a 5uS delay | |
68 | * | |
69 | * In the longer term this should become an architecture specific | |
70 | * section so that this can become a generic driver interface for all | |
71 | * platforms. For now we only handle PC I/O ports with or without the | |
72 | * dread 5uS sanity delay. | |
73 | * | |
74 | * The caller must hold sufficient locks to avoid violating the horrible | |
75 | * 5uS delay rule. | |
76 | */ | |
77 | ||
78 | static inline int z8530_read_port(unsigned long p) | |
79 | { | |
80 | u8 r=inb(Z8530_PORT_OF(p)); | |
81 | if(p&Z8530_PORT_SLEEP) /* gcc should figure this out efficiently ! */ | |
82 | udelay(5); | |
83 | return r; | |
84 | } | |
85 | ||
86 | /** | |
87 | * z8530_write_port - Architecture specific interface function | |
88 | * @p: port to write | |
89 | * @d: value to write | |
90 | * | |
91 | * Write a value to a port with delays if need be. Note that the | |
92 | * caller must hold locks to avoid read/writes from other contexts | |
93 | * violating the 5uS rule | |
94 | * | |
95 | * In the longer term this should become an architecture specific | |
96 | * section so that this can become a generic driver interface for all | |
97 | * platforms. For now we only handle PC I/O ports with or without the | |
98 | * dread 5uS sanity delay. | |
99 | */ | |
100 | ||
101 | ||
102 | static inline void z8530_write_port(unsigned long p, u8 d) | |
103 | { | |
104 | outb(d,Z8530_PORT_OF(p)); | |
105 | if(p&Z8530_PORT_SLEEP) | |
106 | udelay(5); | |
107 | } | |
108 | ||
109 | ||
110 | ||
111 | static void z8530_rx_done(struct z8530_channel *c); | |
112 | static void z8530_tx_done(struct z8530_channel *c); | |
113 | ||
114 | ||
115 | /** | |
116 | * read_zsreg - Read a register from a Z85230 | |
117 | * @c: Z8530 channel to read from (2 per chip) | |
118 | * @reg: Register to read | |
119 | * FIXME: Use a spinlock. | |
120 | * | |
121 | * Most of the Z8530 registers are indexed off the control registers. | |
122 | * A read is done by writing to the control register and reading the | |
123 | * register back. The caller must hold the lock | |
124 | */ | |
125 | ||
126 | static inline u8 read_zsreg(struct z8530_channel *c, u8 reg) | |
127 | { | |
128 | if(reg) | |
129 | z8530_write_port(c->ctrlio, reg); | |
130 | return z8530_read_port(c->ctrlio); | |
131 | } | |
132 | ||
133 | /** | |
134 | * read_zsdata - Read the data port of a Z8530 channel | |
135 | * @c: The Z8530 channel to read the data port from | |
136 | * | |
137 | * The data port provides fast access to some things. We still | |
138 | * have all the 5uS delays to worry about. | |
139 | */ | |
140 | ||
141 | static inline u8 read_zsdata(struct z8530_channel *c) | |
142 | { | |
143 | u8 r; | |
144 | r=z8530_read_port(c->dataio); | |
145 | return r; | |
146 | } | |
147 | ||
148 | /** | |
149 | * write_zsreg - Write to a Z8530 channel register | |
150 | * @c: The Z8530 channel | |
151 | * @reg: Register number | |
152 | * @val: Value to write | |
153 | * | |
154 | * Write a value to an indexed register. The caller must hold the lock | |
155 | * to honour the irritating delay rules. We know about register 0 | |
156 | * being fast to access. | |
157 | * | |
158 | * Assumes c->lock is held. | |
159 | */ | |
160 | static inline void write_zsreg(struct z8530_channel *c, u8 reg, u8 val) | |
161 | { | |
162 | if(reg) | |
163 | z8530_write_port(c->ctrlio, reg); | |
164 | z8530_write_port(c->ctrlio, val); | |
165 | ||
166 | } | |
167 | ||
168 | /** | |
169 | * write_zsctrl - Write to a Z8530 control register | |
170 | * @c: The Z8530 channel | |
171 | * @val: Value to write | |
172 | * | |
173 | * Write directly to the control register on the Z8530 | |
174 | */ | |
175 | ||
176 | static inline void write_zsctrl(struct z8530_channel *c, u8 val) | |
177 | { | |
178 | z8530_write_port(c->ctrlio, val); | |
179 | } | |
180 | ||
181 | /** | |
182 | * write_zsdata - Write to a Z8530 control register | |
183 | * @c: The Z8530 channel | |
184 | * @val: Value to write | |
185 | * | |
186 | * Write directly to the data register on the Z8530 | |
187 | */ | |
188 | ||
189 | ||
190 | static inline void write_zsdata(struct z8530_channel *c, u8 val) | |
191 | { | |
192 | z8530_write_port(c->dataio, val); | |
193 | } | |
194 | ||
195 | /* | |
196 | * Register loading parameters for a dead port | |
197 | */ | |
198 | ||
199 | u8 z8530_dead_port[]= | |
200 | { | |
201 | 255 | |
202 | }; | |
203 | ||
204 | EXPORT_SYMBOL(z8530_dead_port); | |
205 | ||
206 | /* | |
207 | * Register loading parameters for currently supported circuit types | |
208 | */ | |
209 | ||
210 | ||
211 | /* | |
212 | * Data clocked by telco end. This is the correct data for the UK | |
213 | * "kilostream" service, and most other similar services. | |
214 | */ | |
215 | ||
216 | u8 z8530_hdlc_kilostream[]= | |
217 | { | |
218 | 4, SYNC_ENAB|SDLC|X1CLK, | |
219 | 2, 0, /* No vector */ | |
220 | 1, 0, | |
221 | 3, ENT_HM|RxCRC_ENAB|Rx8, | |
222 | 5, TxCRC_ENAB|RTS|TxENAB|Tx8|DTR, | |
223 | 9, 0, /* Disable interrupts */ | |
224 | 6, 0xFF, | |
225 | 7, FLAG, | |
226 | 10, ABUNDER|NRZ|CRCPS,/*MARKIDLE ??*/ | |
227 | 11, TCTRxCP, | |
228 | 14, DISDPLL, | |
229 | 15, DCDIE|SYNCIE|CTSIE|TxUIE|BRKIE, | |
230 | 1, EXT_INT_ENAB|TxINT_ENAB|INT_ALL_Rx, | |
231 | 9, NV|MIE|NORESET, | |
232 | 255 | |
233 | }; | |
234 | ||
235 | EXPORT_SYMBOL(z8530_hdlc_kilostream); | |
236 | ||
237 | /* | |
238 | * As above but for enhanced chips. | |
239 | */ | |
240 | ||
241 | u8 z8530_hdlc_kilostream_85230[]= | |
242 | { | |
243 | 4, SYNC_ENAB|SDLC|X1CLK, | |
244 | 2, 0, /* No vector */ | |
245 | 1, 0, | |
246 | 3, ENT_HM|RxCRC_ENAB|Rx8, | |
247 | 5, TxCRC_ENAB|RTS|TxENAB|Tx8|DTR, | |
248 | 9, 0, /* Disable interrupts */ | |
249 | 6, 0xFF, | |
250 | 7, FLAG, | |
251 | 10, ABUNDER|NRZ|CRCPS, /* MARKIDLE?? */ | |
252 | 11, TCTRxCP, | |
253 | 14, DISDPLL, | |
254 | 15, DCDIE|SYNCIE|CTSIE|TxUIE|BRKIE, | |
255 | 1, EXT_INT_ENAB|TxINT_ENAB|INT_ALL_Rx, | |
256 | 9, NV|MIE|NORESET, | |
257 | 23, 3, /* Extended mode AUTO TX and EOM*/ | |
258 | ||
259 | 255 | |
260 | }; | |
261 | ||
262 | EXPORT_SYMBOL(z8530_hdlc_kilostream_85230); | |
263 | ||
264 | /** | |
265 | * z8530_flush_fifo - Flush on chip RX FIFO | |
266 | * @c: Channel to flush | |
267 | * | |
268 | * Flush the receive FIFO. There is no specific option for this, we | |
269 | * blindly read bytes and discard them. Reading when there is no data | |
270 | * is harmless. The 8530 has a 4 byte FIFO, the 85230 has 8 bytes. | |
271 | * | |
272 | * All locking is handled for the caller. On return data may still be | |
273 | * present if it arrived during the flush. | |
274 | */ | |
275 | ||
276 | static void z8530_flush_fifo(struct z8530_channel *c) | |
277 | { | |
278 | read_zsreg(c, R1); | |
279 | read_zsreg(c, R1); | |
280 | read_zsreg(c, R1); | |
281 | read_zsreg(c, R1); | |
282 | if(c->dev->type==Z85230) | |
283 | { | |
284 | read_zsreg(c, R1); | |
285 | read_zsreg(c, R1); | |
286 | read_zsreg(c, R1); | |
287 | read_zsreg(c, R1); | |
288 | } | |
289 | } | |
290 | ||
291 | /** | |
292 | * z8530_rtsdtr - Control the outgoing DTS/RTS line | |
293 | * @c: The Z8530 channel to control; | |
294 | * @set: 1 to set, 0 to clear | |
295 | * | |
296 | * Sets or clears DTR/RTS on the requested line. All locking is handled | |
297 | * by the caller. For now we assume all boards use the actual RTS/DTR | |
298 | * on the chip. Apparently one or two don't. We'll scream about them | |
299 | * later. | |
300 | */ | |
301 | ||
302 | static void z8530_rtsdtr(struct z8530_channel *c, int set) | |
303 | { | |
304 | if (set) | |
305 | c->regs[5] |= (RTS | DTR); | |
306 | else | |
307 | c->regs[5] &= ~(RTS | DTR); | |
308 | write_zsreg(c, R5, c->regs[5]); | |
309 | } | |
310 | ||
311 | /** | |
312 | * z8530_rx - Handle a PIO receive event | |
313 | * @c: Z8530 channel to process | |
314 | * | |
315 | * Receive handler for receiving in PIO mode. This is much like the | |
316 | * async one but not quite the same or as complex | |
317 | * | |
318 | * Note: Its intended that this handler can easily be separated from | |
319 | * the main code to run realtime. That'll be needed for some machines | |
320 | * (eg to ever clock 64kbits on a sparc ;)). | |
321 | * | |
322 | * The RT_LOCK macros don't do anything now. Keep the code covered | |
323 | * by them as short as possible in all circumstances - clocks cost | |
324 | * baud. The interrupt handler is assumed to be atomic w.r.t. to | |
325 | * other code - this is true in the RT case too. | |
326 | * | |
327 | * We only cover the sync cases for this. If you want 2Mbit async | |
328 | * do it yourself but consider medical assistance first. This non DMA | |
329 | * synchronous mode is portable code. The DMA mode assumes PCI like | |
330 | * ISA DMA | |
331 | * | |
332 | * Called with the device lock held | |
333 | */ | |
334 | ||
335 | static void z8530_rx(struct z8530_channel *c) | |
336 | { | |
337 | u8 ch,stat; | |
45d3ac4e | 338 | |
1da177e4 LT |
339 | while(1) |
340 | { | |
341 | /* FIFO empty ? */ | |
342 | if(!(read_zsreg(c, R0)&1)) | |
343 | break; | |
344 | ch=read_zsdata(c); | |
345 | stat=read_zsreg(c, R1); | |
346 | ||
347 | /* | |
348 | * Overrun ? | |
349 | */ | |
350 | if(c->count < c->max) | |
351 | { | |
352 | *c->dptr++=ch; | |
353 | c->count++; | |
354 | } | |
355 | ||
356 | if(stat&END_FR) | |
357 | { | |
358 | ||
359 | /* | |
360 | * Error ? | |
361 | */ | |
362 | if(stat&(Rx_OVR|CRC_ERR)) | |
363 | { | |
364 | /* Rewind the buffer and return */ | |
365 | if(c->skb) | |
366 | c->dptr=c->skb->data; | |
367 | c->count=0; | |
368 | if(stat&Rx_OVR) | |
369 | { | |
23efcb73 | 370 | pr_warn("%s: overrun\n", c->dev->name); |
1da177e4 LT |
371 | c->rx_overrun++; |
372 | } | |
373 | if(stat&CRC_ERR) | |
374 | { | |
375 | c->rx_crc_err++; | |
376 | /* printk("crc error\n"); */ | |
377 | } | |
378 | /* Shove the frame upstream */ | |
379 | } | |
380 | else | |
381 | { | |
382 | /* | |
383 | * Drop the lock for RX processing, or | |
384 | * there are deadlocks | |
385 | */ | |
386 | z8530_rx_done(c); | |
387 | write_zsctrl(c, RES_Rx_CRC); | |
388 | } | |
389 | } | |
390 | } | |
391 | /* | |
392 | * Clear irq | |
393 | */ | |
394 | write_zsctrl(c, ERR_RES); | |
395 | write_zsctrl(c, RES_H_IUS); | |
1da177e4 LT |
396 | } |
397 | ||
398 | ||
399 | /** | |
400 | * z8530_tx - Handle a PIO transmit event | |
401 | * @c: Z8530 channel to process | |
402 | * | |
403 | * Z8530 transmit interrupt handler for the PIO mode. The basic | |
404 | * idea is to attempt to keep the FIFO fed. We fill as many bytes | |
405 | * in as possible, its quite possible that we won't keep up with the | |
406 | * data rate otherwise. | |
407 | */ | |
408 | ||
409 | static void z8530_tx(struct z8530_channel *c) | |
410 | { | |
1da177e4 LT |
411 | while(c->txcount) { |
412 | /* FIFO full ? */ | |
413 | if(!(read_zsreg(c, R0)&4)) | |
fe797455 | 414 | return; |
1da177e4 LT |
415 | c->txcount--; |
416 | /* | |
417 | * Shovel out the byte | |
418 | */ | |
419 | write_zsreg(c, R8, *c->tx_ptr++); | |
420 | write_zsctrl(c, RES_H_IUS); | |
421 | /* We are about to underflow */ | |
422 | if(c->txcount==0) | |
423 | { | |
424 | write_zsctrl(c, RES_EOM_L); | |
425 | write_zsreg(c, R10, c->regs[10]&~ABUNDER); | |
426 | } | |
427 | } | |
428 | ||
429 | ||
430 | /* | |
431 | * End of frame TX - fire another one | |
432 | */ | |
433 | ||
434 | write_zsctrl(c, RES_Tx_P); | |
435 | ||
436 | z8530_tx_done(c); | |
437 | write_zsctrl(c, RES_H_IUS); | |
1da177e4 LT |
438 | } |
439 | ||
440 | /** | |
441 | * z8530_status - Handle a PIO status exception | |
442 | * @chan: Z8530 channel to process | |
443 | * | |
444 | * A status event occurred in PIO synchronous mode. There are several | |
445 | * reasons the chip will bother us here. A transmit underrun means we | |
446 | * failed to feed the chip fast enough and just broke a packet. A DCD | |
52e8a6a2 | 447 | * change is a line up or down. |
1da177e4 LT |
448 | */ |
449 | ||
450 | static void z8530_status(struct z8530_channel *chan) | |
451 | { | |
452 | u8 status, altered; | |
453 | ||
52e8a6a2 KH |
454 | status = read_zsreg(chan, R0); |
455 | altered = chan->status ^ status; | |
456 | ||
457 | chan->status = status; | |
458 | ||
459 | if (status & TxEOM) { | |
1da177e4 | 460 | /* printk("%s: Tx underrun.\n", chan->dev->name); */ |
52e8a6a2 | 461 | chan->netdevice->stats.tx_fifo_errors++; |
1da177e4 LT |
462 | write_zsctrl(chan, ERR_RES); |
463 | z8530_tx_done(chan); | |
464 | } | |
52e8a6a2 KH |
465 | |
466 | if (altered & chan->dcdcheck) | |
1da177e4 | 467 | { |
52e8a6a2 | 468 | if (status & chan->dcdcheck) { |
23efcb73 | 469 | pr_info("%s: DCD raised\n", chan->dev->name); |
52e8a6a2 KH |
470 | write_zsreg(chan, R3, chan->regs[3] | RxENABLE); |
471 | if (chan->netdevice) | |
472 | netif_carrier_on(chan->netdevice); | |
473 | } else { | |
23efcb73 | 474 | pr_info("%s: DCD lost\n", chan->dev->name); |
52e8a6a2 | 475 | write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE); |
1da177e4 | 476 | z8530_flush_fifo(chan); |
52e8a6a2 KH |
477 | if (chan->netdevice) |
478 | netif_carrier_off(chan->netdevice); | |
1da177e4 | 479 | } |
52e8a6a2 KH |
480 | |
481 | } | |
1da177e4 LT |
482 | write_zsctrl(chan, RES_EXT_INT); |
483 | write_zsctrl(chan, RES_H_IUS); | |
1da177e4 LT |
484 | } |
485 | ||
3598f5d0 KC |
486 | struct z8530_irqhandler z8530_sync = { |
487 | .rx = z8530_rx, | |
488 | .tx = z8530_tx, | |
489 | .status = z8530_status, | |
1da177e4 LT |
490 | }; |
491 | ||
492 | EXPORT_SYMBOL(z8530_sync); | |
493 | ||
494 | /** | |
495 | * z8530_dma_rx - Handle a DMA RX event | |
496 | * @chan: Channel to handle | |
497 | * | |
498 | * Non bus mastering DMA interfaces for the Z8x30 devices. This | |
499 | * is really pretty PC specific. The DMA mode means that most receive | |
500 | * events are handled by the DMA hardware. We get a kick here only if | |
501 | * a frame ended. | |
502 | */ | |
503 | ||
504 | static void z8530_dma_rx(struct z8530_channel *chan) | |
505 | { | |
1da177e4 LT |
506 | if(chan->rxdma_on) |
507 | { | |
508 | /* Special condition check only */ | |
509 | u8 status; | |
510 | ||
511 | read_zsreg(chan, R7); | |
512 | read_zsreg(chan, R6); | |
513 | ||
514 | status=read_zsreg(chan, R1); | |
515 | ||
516 | if(status&END_FR) | |
517 | { | |
518 | z8530_rx_done(chan); /* Fire up the next one */ | |
519 | } | |
520 | write_zsctrl(chan, ERR_RES); | |
521 | write_zsctrl(chan, RES_H_IUS); | |
522 | } | |
523 | else | |
524 | { | |
525 | /* DMA is off right now, drain the slow way */ | |
526 | z8530_rx(chan); | |
527 | } | |
1da177e4 LT |
528 | } |
529 | ||
530 | /** | |
531 | * z8530_dma_tx - Handle a DMA TX event | |
532 | * @chan: The Z8530 channel to handle | |
533 | * | |
534 | * We have received an interrupt while doing DMA transmissions. It | |
535 | * shouldn't happen. Scream loudly if it does. | |
536 | */ | |
537 | ||
538 | static void z8530_dma_tx(struct z8530_channel *chan) | |
539 | { | |
1da177e4 LT |
540 | if(!chan->dma_tx) |
541 | { | |
23efcb73 | 542 | pr_warn("Hey who turned the DMA off?\n"); |
1da177e4 LT |
543 | z8530_tx(chan); |
544 | return; | |
545 | } | |
25985edc | 546 | /* This shouldn't occur in DMA mode */ |
23efcb73 | 547 | pr_err("DMA tx - bogus event!\n"); |
1da177e4 | 548 | z8530_tx(chan); |
1da177e4 LT |
549 | } |
550 | ||
551 | /** | |
552 | * z8530_dma_status - Handle a DMA status exception | |
553 | * @chan: Z8530 channel to process | |
554 | * | |
555 | * A status event occurred on the Z8530. We receive these for two reasons | |
556 | * when in DMA mode. Firstly if we finished a packet transfer we get one | |
52e8a6a2 | 557 | * and kick the next packet out. Secondly we may see a DCD change. |
1da177e4 LT |
558 | * |
559 | */ | |
560 | ||
561 | static void z8530_dma_status(struct z8530_channel *chan) | |
562 | { | |
563 | u8 status, altered; | |
564 | ||
565 | status=read_zsreg(chan, R0); | |
566 | altered=chan->status^status; | |
567 | ||
568 | chan->status=status; | |
569 | ||
570 | ||
571 | if(chan->dma_tx) | |
572 | { | |
573 | if(status&TxEOM) | |
574 | { | |
575 | unsigned long flags; | |
576 | ||
577 | flags=claim_dma_lock(); | |
578 | disable_dma(chan->txdma); | |
579 | clear_dma_ff(chan->txdma); | |
580 | chan->txdma_on=0; | |
581 | release_dma_lock(flags); | |
582 | z8530_tx_done(chan); | |
583 | } | |
584 | } | |
585 | ||
52e8a6a2 | 586 | if (altered & chan->dcdcheck) |
1da177e4 | 587 | { |
52e8a6a2 | 588 | if (status & chan->dcdcheck) { |
23efcb73 | 589 | pr_info("%s: DCD raised\n", chan->dev->name); |
52e8a6a2 KH |
590 | write_zsreg(chan, R3, chan->regs[3] | RxENABLE); |
591 | if (chan->netdevice) | |
592 | netif_carrier_on(chan->netdevice); | |
593 | } else { | |
23efcb73 | 594 | pr_info("%s: DCD lost\n", chan->dev->name); |
52e8a6a2 | 595 | write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE); |
1da177e4 | 596 | z8530_flush_fifo(chan); |
52e8a6a2 KH |
597 | if (chan->netdevice) |
598 | netif_carrier_off(chan->netdevice); | |
1da177e4 | 599 | } |
52e8a6a2 | 600 | } |
1da177e4 LT |
601 | |
602 | write_zsctrl(chan, RES_EXT_INT); | |
603 | write_zsctrl(chan, RES_H_IUS); | |
1da177e4 LT |
604 | } |
605 | ||
62c5345d | 606 | static struct z8530_irqhandler z8530_dma_sync = { |
3598f5d0 KC |
607 | .rx = z8530_dma_rx, |
608 | .tx = z8530_dma_tx, | |
609 | .status = z8530_dma_status, | |
1da177e4 LT |
610 | }; |
611 | ||
62c5345d | 612 | static struct z8530_irqhandler z8530_txdma_sync = { |
3598f5d0 KC |
613 | .rx = z8530_rx, |
614 | .tx = z8530_dma_tx, | |
615 | .status = z8530_dma_status, | |
1da177e4 LT |
616 | }; |
617 | ||
1da177e4 LT |
618 | /** |
619 | * z8530_rx_clear - Handle RX events from a stopped chip | |
620 | * @c: Z8530 channel to shut up | |
621 | * | |
622 | * Receive interrupt vectors for a Z8530 that is in 'parked' mode. | |
623 | * For machines with PCI Z85x30 cards, or level triggered interrupts | |
624 | * (eg the MacII) we must clear the interrupt cause or die. | |
625 | */ | |
626 | ||
627 | ||
628 | static void z8530_rx_clear(struct z8530_channel *c) | |
629 | { | |
630 | /* | |
631 | * Data and status bytes | |
632 | */ | |
633 | u8 stat; | |
634 | ||
635 | read_zsdata(c); | |
636 | stat=read_zsreg(c, R1); | |
637 | ||
638 | if(stat&END_FR) | |
639 | write_zsctrl(c, RES_Rx_CRC); | |
640 | /* | |
641 | * Clear irq | |
642 | */ | |
643 | write_zsctrl(c, ERR_RES); | |
644 | write_zsctrl(c, RES_H_IUS); | |
645 | } | |
646 | ||
647 | /** | |
648 | * z8530_tx_clear - Handle TX events from a stopped chip | |
649 | * @c: Z8530 channel to shut up | |
650 | * | |
651 | * Transmit interrupt vectors for a Z8530 that is in 'parked' mode. | |
652 | * For machines with PCI Z85x30 cards, or level triggered interrupts | |
653 | * (eg the MacII) we must clear the interrupt cause or die. | |
654 | */ | |
655 | ||
656 | static void z8530_tx_clear(struct z8530_channel *c) | |
657 | { | |
658 | write_zsctrl(c, RES_Tx_P); | |
659 | write_zsctrl(c, RES_H_IUS); | |
660 | } | |
661 | ||
662 | /** | |
663 | * z8530_status_clear - Handle status events from a stopped chip | |
664 | * @chan: Z8530 channel to shut up | |
665 | * | |
666 | * Status interrupt vectors for a Z8530 that is in 'parked' mode. | |
667 | * For machines with PCI Z85x30 cards, or level triggered interrupts | |
668 | * (eg the MacII) we must clear the interrupt cause or die. | |
669 | */ | |
670 | ||
671 | static void z8530_status_clear(struct z8530_channel *chan) | |
672 | { | |
673 | u8 status=read_zsreg(chan, R0); | |
674 | if(status&TxEOM) | |
675 | write_zsctrl(chan, ERR_RES); | |
676 | write_zsctrl(chan, RES_EXT_INT); | |
677 | write_zsctrl(chan, RES_H_IUS); | |
678 | } | |
679 | ||
3598f5d0 KC |
680 | struct z8530_irqhandler z8530_nop = { |
681 | .rx = z8530_rx_clear, | |
682 | .tx = z8530_tx_clear, | |
683 | .status = z8530_status_clear, | |
1da177e4 LT |
684 | }; |
685 | ||
686 | ||
687 | EXPORT_SYMBOL(z8530_nop); | |
688 | ||
689 | /** | |
690 | * z8530_interrupt - Handle an interrupt from a Z8530 | |
691 | * @irq: Interrupt number | |
692 | * @dev_id: The Z8530 device that is interrupting. | |
1da177e4 LT |
693 | * |
694 | * A Z85[2]30 device has stuck its hand in the air for attention. | |
695 | * We scan both the channels on the chip for events and then call | |
696 | * the channel specific call backs for each channel that has events. | |
697 | * We have to use callback functions because the two channels can be | |
698 | * in different modes. | |
699 | * | |
700 | * Locking is done for the handlers. Note that locking is done | |
701 | * at the chip level (the 5uS delay issue is per chip not per | |
702 | * channel). c->lock for both channels points to dev->lock | |
703 | */ | |
704 | ||
7d12e780 | 705 | irqreturn_t z8530_interrupt(int irq, void *dev_id) |
1da177e4 LT |
706 | { |
707 | struct z8530_dev *dev=dev_id; | |
4174439e | 708 | u8 uninitialized_var(intr); |
1da177e4 LT |
709 | static volatile int locker=0; |
710 | int work=0; | |
711 | struct z8530_irqhandler *irqs; | |
712 | ||
713 | if(locker) | |
714 | { | |
23efcb73 | 715 | pr_err("IRQ re-enter\n"); |
1da177e4 LT |
716 | return IRQ_NONE; |
717 | } | |
718 | locker=1; | |
719 | ||
720 | spin_lock(&dev->lock); | |
721 | ||
722 | while(++work<5000) | |
723 | { | |
724 | ||
725 | intr = read_zsreg(&dev->chanA, R3); | |
726 | if(!(intr & (CHARxIP|CHATxIP|CHAEXT|CHBRxIP|CHBTxIP|CHBEXT))) | |
727 | break; | |
728 | ||
729 | /* This holds the IRQ status. On the 8530 you must read it from chan | |
730 | A even though it applies to the whole chip */ | |
731 | ||
732 | /* Now walk the chip and see what it is wanting - it may be | |
733 | an IRQ for someone else remember */ | |
734 | ||
735 | irqs=dev->chanA.irqs; | |
736 | ||
737 | if(intr & (CHARxIP|CHATxIP|CHAEXT)) | |
738 | { | |
739 | if(intr&CHARxIP) | |
740 | irqs->rx(&dev->chanA); | |
741 | if(intr&CHATxIP) | |
742 | irqs->tx(&dev->chanA); | |
743 | if(intr&CHAEXT) | |
744 | irqs->status(&dev->chanA); | |
745 | } | |
746 | ||
747 | irqs=dev->chanB.irqs; | |
748 | ||
749 | if(intr & (CHBRxIP|CHBTxIP|CHBEXT)) | |
750 | { | |
751 | if(intr&CHBRxIP) | |
752 | irqs->rx(&dev->chanB); | |
753 | if(intr&CHBTxIP) | |
754 | irqs->tx(&dev->chanB); | |
755 | if(intr&CHBEXT) | |
756 | irqs->status(&dev->chanB); | |
757 | } | |
758 | } | |
759 | spin_unlock(&dev->lock); | |
760 | if(work==5000) | |
23efcb73 JP |
761 | pr_err("%s: interrupt jammed - abort(0x%X)!\n", |
762 | dev->name, intr); | |
1da177e4 LT |
763 | /* Ok all done */ |
764 | locker=0; | |
765 | return IRQ_HANDLED; | |
766 | } | |
767 | ||
768 | EXPORT_SYMBOL(z8530_interrupt); | |
769 | ||
dcfc5d78 | 770 | static const u8 reg_init[16]= |
1da177e4 LT |
771 | { |
772 | 0,0,0,0, | |
773 | 0,0,0,0, | |
774 | 0,0,0,0, | |
775 | 0x55,0,0,0 | |
776 | }; | |
777 | ||
778 | ||
779 | /** | |
780 | * z8530_sync_open - Open a Z8530 channel for PIO | |
781 | * @dev: The network interface we are using | |
782 | * @c: The Z8530 channel to open in synchronous PIO mode | |
783 | * | |
784 | * Switch a Z8530 into synchronous mode without DMA assist. We | |
785 | * raise the RTS/DTR and commence network operation. | |
786 | */ | |
787 | ||
788 | int z8530_sync_open(struct net_device *dev, struct z8530_channel *c) | |
789 | { | |
790 | unsigned long flags; | |
791 | ||
792 | spin_lock_irqsave(c->lock, flags); | |
793 | ||
794 | c->sync = 1; | |
795 | c->mtu = dev->mtu+64; | |
796 | c->count = 0; | |
797 | c->skb = NULL; | |
798 | c->skb2 = NULL; | |
799 | c->irqs = &z8530_sync; | |
800 | ||
801 | /* This loads the double buffer up */ | |
802 | z8530_rx_done(c); /* Load the frame ring */ | |
803 | z8530_rx_done(c); /* Load the backup frame */ | |
804 | z8530_rtsdtr(c,1); | |
805 | c->dma_tx = 0; | |
806 | c->regs[R1]|=TxINT_ENAB; | |
807 | write_zsreg(c, R1, c->regs[R1]); | |
808 | write_zsreg(c, R3, c->regs[R3]|RxENABLE); | |
809 | ||
810 | spin_unlock_irqrestore(c->lock, flags); | |
811 | return 0; | |
812 | } | |
813 | ||
814 | ||
815 | EXPORT_SYMBOL(z8530_sync_open); | |
816 | ||
817 | /** | |
818 | * z8530_sync_close - Close a PIO Z8530 channel | |
819 | * @dev: Network device to close | |
820 | * @c: Z8530 channel to disassociate and move to idle | |
821 | * | |
822 | * Close down a Z8530 interface and switch its interrupt handlers | |
823 | * to discard future events. | |
824 | */ | |
825 | ||
826 | int z8530_sync_close(struct net_device *dev, struct z8530_channel *c) | |
827 | { | |
828 | u8 chk; | |
829 | unsigned long flags; | |
830 | ||
831 | spin_lock_irqsave(c->lock, flags); | |
832 | c->irqs = &z8530_nop; | |
833 | c->max = 0; | |
834 | c->sync = 0; | |
835 | ||
836 | chk=read_zsreg(c,R0); | |
837 | write_zsreg(c, R3, c->regs[R3]); | |
838 | z8530_rtsdtr(c,0); | |
839 | ||
840 | spin_unlock_irqrestore(c->lock, flags); | |
841 | return 0; | |
842 | } | |
843 | ||
844 | EXPORT_SYMBOL(z8530_sync_close); | |
845 | ||
846 | /** | |
847 | * z8530_sync_dma_open - Open a Z8530 for DMA I/O | |
848 | * @dev: The network device to attach | |
849 | * @c: The Z8530 channel to configure in sync DMA mode. | |
850 | * | |
851 | * Set up a Z85x30 device for synchronous DMA in both directions. Two | |
852 | * ISA DMA channels must be available for this to work. We assume ISA | |
853 | * DMA driven I/O and PC limits on access. | |
854 | */ | |
855 | ||
856 | int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c) | |
857 | { | |
858 | unsigned long cflags, dflags; | |
859 | ||
860 | c->sync = 1; | |
861 | c->mtu = dev->mtu+64; | |
862 | c->count = 0; | |
863 | c->skb = NULL; | |
864 | c->skb2 = NULL; | |
865 | /* | |
866 | * Load the DMA interfaces up | |
867 | */ | |
868 | c->rxdma_on = 0; | |
869 | c->txdma_on = 0; | |
870 | ||
871 | /* | |
872 | * Allocate the DMA flip buffers. Limit by page size. | |
873 | * Everyone runs 1500 mtu or less on wan links so this | |
874 | * should be fine. | |
875 | */ | |
876 | ||
877 | if(c->mtu > PAGE_SIZE/2) | |
878 | return -EMSGSIZE; | |
879 | ||
880 | c->rx_buf[0]=(void *)get_zeroed_page(GFP_KERNEL|GFP_DMA); | |
881 | if(c->rx_buf[0]==NULL) | |
882 | return -ENOBUFS; | |
883 | c->rx_buf[1]=c->rx_buf[0]+PAGE_SIZE/2; | |
884 | ||
885 | c->tx_dma_buf[0]=(void *)get_zeroed_page(GFP_KERNEL|GFP_DMA); | |
886 | if(c->tx_dma_buf[0]==NULL) | |
887 | { | |
888 | free_page((unsigned long)c->rx_buf[0]); | |
889 | c->rx_buf[0]=NULL; | |
890 | return -ENOBUFS; | |
891 | } | |
892 | c->tx_dma_buf[1]=c->tx_dma_buf[0]+PAGE_SIZE/2; | |
893 | ||
894 | c->tx_dma_used=0; | |
895 | c->dma_tx = 1; | |
896 | c->dma_num=0; | |
897 | c->dma_ready=1; | |
898 | ||
899 | /* | |
900 | * Enable DMA control mode | |
901 | */ | |
902 | ||
903 | spin_lock_irqsave(c->lock, cflags); | |
904 | ||
905 | /* | |
906 | * TX DMA via DIR/REQ | |
907 | */ | |
908 | ||
909 | c->regs[R14]|= DTRREQ; | |
910 | write_zsreg(c, R14, c->regs[R14]); | |
911 | ||
912 | c->regs[R1]&= ~TxINT_ENAB; | |
913 | write_zsreg(c, R1, c->regs[R1]); | |
914 | ||
915 | /* | |
916 | * RX DMA via W/Req | |
917 | */ | |
918 | ||
919 | c->regs[R1]|= WT_FN_RDYFN; | |
920 | c->regs[R1]|= WT_RDY_RT; | |
921 | c->regs[R1]|= INT_ERR_Rx; | |
922 | c->regs[R1]&= ~TxINT_ENAB; | |
923 | write_zsreg(c, R1, c->regs[R1]); | |
924 | c->regs[R1]|= WT_RDY_ENAB; | |
925 | write_zsreg(c, R1, c->regs[R1]); | |
926 | ||
927 | /* | |
928 | * DMA interrupts | |
929 | */ | |
930 | ||
931 | /* | |
932 | * Set up the DMA configuration | |
933 | */ | |
934 | ||
935 | dflags=claim_dma_lock(); | |
936 | ||
937 | disable_dma(c->rxdma); | |
938 | clear_dma_ff(c->rxdma); | |
939 | set_dma_mode(c->rxdma, DMA_MODE_READ|0x10); | |
940 | set_dma_addr(c->rxdma, virt_to_bus(c->rx_buf[0])); | |
941 | set_dma_count(c->rxdma, c->mtu); | |
942 | enable_dma(c->rxdma); | |
943 | ||
944 | disable_dma(c->txdma); | |
945 | clear_dma_ff(c->txdma); | |
946 | set_dma_mode(c->txdma, DMA_MODE_WRITE); | |
947 | disable_dma(c->txdma); | |
948 | ||
949 | release_dma_lock(dflags); | |
950 | ||
951 | /* | |
952 | * Select the DMA interrupt handlers | |
953 | */ | |
954 | ||
955 | c->rxdma_on = 1; | |
956 | c->txdma_on = 1; | |
957 | c->tx_dma_used = 1; | |
958 | ||
959 | c->irqs = &z8530_dma_sync; | |
960 | z8530_rtsdtr(c,1); | |
961 | write_zsreg(c, R3, c->regs[R3]|RxENABLE); | |
962 | ||
963 | spin_unlock_irqrestore(c->lock, cflags); | |
964 | ||
965 | return 0; | |
966 | } | |
967 | ||
968 | EXPORT_SYMBOL(z8530_sync_dma_open); | |
969 | ||
970 | /** | |
971 | * z8530_sync_dma_close - Close down DMA I/O | |
972 | * @dev: Network device to detach | |
973 | * @c: Z8530 channel to move into discard mode | |
974 | * | |
975 | * Shut down a DMA mode synchronous interface. Halt the DMA, and | |
976 | * free the buffers. | |
977 | */ | |
978 | ||
979 | int z8530_sync_dma_close(struct net_device *dev, struct z8530_channel *c) | |
980 | { | |
981 | u8 chk; | |
982 | unsigned long flags; | |
983 | ||
984 | c->irqs = &z8530_nop; | |
985 | c->max = 0; | |
986 | c->sync = 0; | |
987 | ||
988 | /* | |
989 | * Disable the PC DMA channels | |
990 | */ | |
991 | ||
992 | flags=claim_dma_lock(); | |
993 | disable_dma(c->rxdma); | |
994 | clear_dma_ff(c->rxdma); | |
995 | ||
996 | c->rxdma_on = 0; | |
997 | ||
998 | disable_dma(c->txdma); | |
999 | clear_dma_ff(c->txdma); | |
1000 | release_dma_lock(flags); | |
1001 | ||
1002 | c->txdma_on = 0; | |
1003 | c->tx_dma_used = 0; | |
1004 | ||
1005 | spin_lock_irqsave(c->lock, flags); | |
1006 | ||
1007 | /* | |
1008 | * Disable DMA control mode | |
1009 | */ | |
1010 | ||
1011 | c->regs[R1]&= ~WT_RDY_ENAB; | |
1012 | write_zsreg(c, R1, c->regs[R1]); | |
1013 | c->regs[R1]&= ~(WT_RDY_RT|WT_FN_RDYFN|INT_ERR_Rx); | |
1014 | c->regs[R1]|= INT_ALL_Rx; | |
1015 | write_zsreg(c, R1, c->regs[R1]); | |
1016 | c->regs[R14]&= ~DTRREQ; | |
1017 | write_zsreg(c, R14, c->regs[R14]); | |
1018 | ||
1019 | if(c->rx_buf[0]) | |
1020 | { | |
1021 | free_page((unsigned long)c->rx_buf[0]); | |
1022 | c->rx_buf[0]=NULL; | |
1023 | } | |
1024 | if(c->tx_dma_buf[0]) | |
1025 | { | |
1026 | free_page((unsigned long)c->tx_dma_buf[0]); | |
1027 | c->tx_dma_buf[0]=NULL; | |
1028 | } | |
1029 | chk=read_zsreg(c,R0); | |
1030 | write_zsreg(c, R3, c->regs[R3]); | |
1031 | z8530_rtsdtr(c,0); | |
1032 | ||
1033 | spin_unlock_irqrestore(c->lock, flags); | |
1034 | ||
1035 | return 0; | |
1036 | } | |
1037 | ||
1038 | EXPORT_SYMBOL(z8530_sync_dma_close); | |
1039 | ||
1040 | /** | |
1041 | * z8530_sync_txdma_open - Open a Z8530 for TX driven DMA | |
1042 | * @dev: The network device to attach | |
1043 | * @c: The Z8530 channel to configure in sync DMA mode. | |
1044 | * | |
145c3708 | 1045 | * Set up a Z85x30 device for synchronous DMA transmission. One |
1da177e4 LT |
1046 | * ISA DMA channel must be available for this to work. The receive |
1047 | * side is run in PIO mode, but then it has the bigger FIFO. | |
1048 | */ | |
1049 | ||
1050 | int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c) | |
1051 | { | |
1052 | unsigned long cflags, dflags; | |
1053 | ||
1054 | printk("Opening sync interface for TX-DMA\n"); | |
1055 | c->sync = 1; | |
1056 | c->mtu = dev->mtu+64; | |
1057 | c->count = 0; | |
1058 | c->skb = NULL; | |
1059 | c->skb2 = NULL; | |
1060 | ||
1061 | /* | |
1062 | * Allocate the DMA flip buffers. Limit by page size. | |
1063 | * Everyone runs 1500 mtu or less on wan links so this | |
1064 | * should be fine. | |
1065 | */ | |
1066 | ||
1067 | if(c->mtu > PAGE_SIZE/2) | |
1068 | return -EMSGSIZE; | |
1069 | ||
1070 | c->tx_dma_buf[0]=(void *)get_zeroed_page(GFP_KERNEL|GFP_DMA); | |
1071 | if(c->tx_dma_buf[0]==NULL) | |
1072 | return -ENOBUFS; | |
1073 | ||
1074 | c->tx_dma_buf[1] = c->tx_dma_buf[0] + PAGE_SIZE/2; | |
1075 | ||
1076 | ||
1077 | spin_lock_irqsave(c->lock, cflags); | |
1078 | ||
1079 | /* | |
1080 | * Load the PIO receive ring | |
1081 | */ | |
1082 | ||
1083 | z8530_rx_done(c); | |
1084 | z8530_rx_done(c); | |
1085 | ||
1086 | /* | |
1087 | * Load the DMA interfaces up | |
1088 | */ | |
1089 | ||
1090 | c->rxdma_on = 0; | |
1091 | c->txdma_on = 0; | |
1092 | ||
1093 | c->tx_dma_used=0; | |
1094 | c->dma_num=0; | |
1095 | c->dma_ready=1; | |
1096 | c->dma_tx = 1; | |
1097 | ||
1098 | /* | |
1099 | * Enable DMA control mode | |
1100 | */ | |
1101 | ||
1102 | /* | |
1103 | * TX DMA via DIR/REQ | |
1104 | */ | |
1105 | c->regs[R14]|= DTRREQ; | |
1106 | write_zsreg(c, R14, c->regs[R14]); | |
1107 | ||
1108 | c->regs[R1]&= ~TxINT_ENAB; | |
1109 | write_zsreg(c, R1, c->regs[R1]); | |
1110 | ||
1111 | /* | |
1112 | * Set up the DMA configuration | |
1113 | */ | |
1114 | ||
1115 | dflags = claim_dma_lock(); | |
1116 | ||
1117 | disable_dma(c->txdma); | |
1118 | clear_dma_ff(c->txdma); | |
1119 | set_dma_mode(c->txdma, DMA_MODE_WRITE); | |
1120 | disable_dma(c->txdma); | |
1121 | ||
1122 | release_dma_lock(dflags); | |
1123 | ||
1124 | /* | |
1125 | * Select the DMA interrupt handlers | |
1126 | */ | |
1127 | ||
1128 | c->rxdma_on = 0; | |
1129 | c->txdma_on = 1; | |
1130 | c->tx_dma_used = 1; | |
1131 | ||
1132 | c->irqs = &z8530_txdma_sync; | |
1133 | z8530_rtsdtr(c,1); | |
1134 | write_zsreg(c, R3, c->regs[R3]|RxENABLE); | |
1135 | spin_unlock_irqrestore(c->lock, cflags); | |
1136 | ||
1137 | return 0; | |
1138 | } | |
1139 | ||
1140 | EXPORT_SYMBOL(z8530_sync_txdma_open); | |
1141 | ||
1142 | /** | |
1143 | * z8530_sync_txdma_close - Close down a TX driven DMA channel | |
1144 | * @dev: Network device to detach | |
1145 | * @c: Z8530 channel to move into discard mode | |
1146 | * | |
1147 | * Shut down a DMA/PIO split mode synchronous interface. Halt the DMA, | |
1148 | * and free the buffers. | |
1149 | */ | |
1150 | ||
1151 | int z8530_sync_txdma_close(struct net_device *dev, struct z8530_channel *c) | |
1152 | { | |
1153 | unsigned long dflags, cflags; | |
1154 | u8 chk; | |
1155 | ||
1156 | ||
1157 | spin_lock_irqsave(c->lock, cflags); | |
1158 | ||
1159 | c->irqs = &z8530_nop; | |
1160 | c->max = 0; | |
1161 | c->sync = 0; | |
1162 | ||
1163 | /* | |
1164 | * Disable the PC DMA channels | |
1165 | */ | |
1166 | ||
1167 | dflags = claim_dma_lock(); | |
1168 | ||
1169 | disable_dma(c->txdma); | |
1170 | clear_dma_ff(c->txdma); | |
1171 | c->txdma_on = 0; | |
1172 | c->tx_dma_used = 0; | |
1173 | ||
1174 | release_dma_lock(dflags); | |
1175 | ||
1176 | /* | |
1177 | * Disable DMA control mode | |
1178 | */ | |
1179 | ||
1180 | c->regs[R1]&= ~WT_RDY_ENAB; | |
1181 | write_zsreg(c, R1, c->regs[R1]); | |
1182 | c->regs[R1]&= ~(WT_RDY_RT|WT_FN_RDYFN|INT_ERR_Rx); | |
1183 | c->regs[R1]|= INT_ALL_Rx; | |
1184 | write_zsreg(c, R1, c->regs[R1]); | |
1185 | c->regs[R14]&= ~DTRREQ; | |
1186 | write_zsreg(c, R14, c->regs[R14]); | |
1187 | ||
1188 | if(c->tx_dma_buf[0]) | |
1189 | { | |
1190 | free_page((unsigned long)c->tx_dma_buf[0]); | |
1191 | c->tx_dma_buf[0]=NULL; | |
1192 | } | |
1193 | chk=read_zsreg(c,R0); | |
1194 | write_zsreg(c, R3, c->regs[R3]); | |
1195 | z8530_rtsdtr(c,0); | |
1196 | ||
1197 | spin_unlock_irqrestore(c->lock, cflags); | |
1198 | return 0; | |
1199 | } | |
1200 | ||
1201 | ||
1202 | EXPORT_SYMBOL(z8530_sync_txdma_close); | |
1203 | ||
1204 | ||
1205 | /* | |
1206 | * Name strings for Z8530 chips. SGI claim to have a 130, Zilog deny | |
1207 | * it exists... | |
1208 | */ | |
1209 | ||
dcfc5d78 | 1210 | static const char *z8530_type_name[]={ |
1da177e4 LT |
1211 | "Z8530", |
1212 | "Z85C30", | |
1213 | "Z85230" | |
1214 | }; | |
1215 | ||
1216 | /** | |
1217 | * z8530_describe - Uniformly describe a Z8530 port | |
1218 | * @dev: Z8530 device to describe | |
1219 | * @mapping: string holding mapping type (eg "I/O" or "Mem") | |
1220 | * @io: the port value in question | |
1221 | * | |
1222 | * Describe a Z8530 in a standard format. We must pass the I/O as | |
25985edc | 1223 | * the port offset isn't predictable. The main reason for this function |
1da177e4 LT |
1224 | * is to try and get a common format of report. |
1225 | */ | |
1226 | ||
1227 | void z8530_describe(struct z8530_dev *dev, char *mapping, unsigned long io) | |
1228 | { | |
23efcb73 | 1229 | pr_info("%s: %s found at %s 0x%lX, IRQ %d\n", |
1da177e4 LT |
1230 | dev->name, |
1231 | z8530_type_name[dev->type], | |
1232 | mapping, | |
1233 | Z8530_PORT_OF(io), | |
1234 | dev->irq); | |
1235 | } | |
1236 | ||
1237 | EXPORT_SYMBOL(z8530_describe); | |
1238 | ||
1239 | /* | |
1240 | * Locked operation part of the z8530 init code | |
1241 | */ | |
1242 | ||
1243 | static inline int do_z8530_init(struct z8530_dev *dev) | |
1244 | { | |
1245 | /* NOP the interrupt handlers first - we might get a | |
1246 | floating IRQ transition when we reset the chip */ | |
1247 | dev->chanA.irqs=&z8530_nop; | |
1248 | dev->chanB.irqs=&z8530_nop; | |
1249 | dev->chanA.dcdcheck=DCD; | |
1250 | dev->chanB.dcdcheck=DCD; | |
1251 | ||
1252 | /* Reset the chip */ | |
1253 | write_zsreg(&dev->chanA, R9, 0xC0); | |
1254 | udelay(200); | |
1255 | /* Now check its valid */ | |
1256 | write_zsreg(&dev->chanA, R12, 0xAA); | |
1257 | if(read_zsreg(&dev->chanA, R12)!=0xAA) | |
1258 | return -ENODEV; | |
1259 | write_zsreg(&dev->chanA, R12, 0x55); | |
1260 | if(read_zsreg(&dev->chanA, R12)!=0x55) | |
1261 | return -ENODEV; | |
1262 | ||
1263 | dev->type=Z8530; | |
1264 | ||
1265 | /* | |
1266 | * See the application note. | |
1267 | */ | |
1268 | ||
1269 | write_zsreg(&dev->chanA, R15, 0x01); | |
1270 | ||
1271 | /* | |
1272 | * If we can set the low bit of R15 then | |
1273 | * the chip is enhanced. | |
1274 | */ | |
1275 | ||
1276 | if(read_zsreg(&dev->chanA, R15)==0x01) | |
1277 | { | |
1278 | /* This C30 versus 230 detect is from Klaus Kudielka's dmascc */ | |
1279 | /* Put a char in the fifo */ | |
1280 | write_zsreg(&dev->chanA, R8, 0); | |
1281 | if(read_zsreg(&dev->chanA, R0)&Tx_BUF_EMP) | |
1282 | dev->type = Z85230; /* Has a FIFO */ | |
1283 | else | |
1284 | dev->type = Z85C30; /* Z85C30, 1 byte FIFO */ | |
1285 | } | |
1286 | ||
1287 | /* | |
1288 | * The code assumes R7' and friends are | |
1289 | * off. Use write_zsext() for these and keep | |
1290 | * this bit clear. | |
1291 | */ | |
1292 | ||
1293 | write_zsreg(&dev->chanA, R15, 0); | |
1294 | ||
1295 | /* | |
1296 | * At this point it looks like the chip is behaving | |
1297 | */ | |
1298 | ||
1299 | memcpy(dev->chanA.regs, reg_init, 16); | |
1300 | memcpy(dev->chanB.regs, reg_init ,16); | |
1301 | ||
1302 | return 0; | |
1303 | } | |
1304 | ||
1305 | /** | |
1306 | * z8530_init - Initialise a Z8530 device | |
1307 | * @dev: Z8530 device to initialise. | |
1308 | * | |
1309 | * Configure up a Z8530/Z85C30 or Z85230 chip. We check the device | |
1310 | * is present, identify the type and then program it to hopefully | |
1311 | * keep quite and behave. This matters a lot, a Z8530 in the wrong | |
1312 | * state will sometimes get into stupid modes generating 10Khz | |
1313 | * interrupt streams and the like. | |
1314 | * | |
1315 | * We set the interrupt handler up to discard any events, in case | |
1316 | * we get them during reset or setp. | |
1317 | * | |
1318 | * Return 0 for success, or a negative value indicating the problem | |
1319 | * in errno form. | |
1320 | */ | |
1321 | ||
1322 | int z8530_init(struct z8530_dev *dev) | |
1323 | { | |
1324 | unsigned long flags; | |
1325 | int ret; | |
1326 | ||
1327 | /* Set up the chip level lock */ | |
1328 | spin_lock_init(&dev->lock); | |
1329 | dev->chanA.lock = &dev->lock; | |
1330 | dev->chanB.lock = &dev->lock; | |
1331 | ||
1332 | spin_lock_irqsave(&dev->lock, flags); | |
1333 | ret = do_z8530_init(dev); | |
1334 | spin_unlock_irqrestore(&dev->lock, flags); | |
1335 | ||
1336 | return ret; | |
1337 | } | |
1338 | ||
1339 | ||
1340 | EXPORT_SYMBOL(z8530_init); | |
1341 | ||
1342 | /** | |
1343 | * z8530_shutdown - Shutdown a Z8530 device | |
1344 | * @dev: The Z8530 chip to shutdown | |
1345 | * | |
1346 | * We set the interrupt handlers to silence any interrupts. We then | |
1347 | * reset the chip and wait 100uS to be sure the reset completed. Just | |
1348 | * in case the caller then tries to do stuff. | |
1349 | * | |
1350 | * This is called without the lock held | |
1351 | */ | |
1352 | ||
1353 | int z8530_shutdown(struct z8530_dev *dev) | |
1354 | { | |
1355 | unsigned long flags; | |
1356 | /* Reset the chip */ | |
1357 | ||
1358 | spin_lock_irqsave(&dev->lock, flags); | |
1359 | dev->chanA.irqs=&z8530_nop; | |
1360 | dev->chanB.irqs=&z8530_nop; | |
1361 | write_zsreg(&dev->chanA, R9, 0xC0); | |
1362 | /* We must lock the udelay, the chip is offlimits here */ | |
1363 | udelay(100); | |
1364 | spin_unlock_irqrestore(&dev->lock, flags); | |
1365 | return 0; | |
1366 | } | |
1367 | ||
1368 | EXPORT_SYMBOL(z8530_shutdown); | |
1369 | ||
1370 | /** | |
1371 | * z8530_channel_load - Load channel data | |
1372 | * @c: Z8530 channel to configure | |
1373 | * @rtable: table of register, value pairs | |
1374 | * FIXME: ioctl to allow user uploaded tables | |
1375 | * | |
1376 | * Load a Z8530 channel up from the system data. We use +16 to | |
1377 | * indicate the "prime" registers. The value 255 terminates the | |
1378 | * table. | |
1379 | */ | |
1380 | ||
1381 | int z8530_channel_load(struct z8530_channel *c, u8 *rtable) | |
1382 | { | |
1383 | unsigned long flags; | |
1384 | ||
1385 | spin_lock_irqsave(c->lock, flags); | |
1386 | ||
1387 | while(*rtable!=255) | |
1388 | { | |
1389 | int reg=*rtable++; | |
1390 | if(reg>0x0F) | |
1391 | write_zsreg(c, R15, c->regs[15]|1); | |
1392 | write_zsreg(c, reg&0x0F, *rtable); | |
1393 | if(reg>0x0F) | |
1394 | write_zsreg(c, R15, c->regs[15]&~1); | |
1395 | c->regs[reg]=*rtable++; | |
1396 | } | |
1397 | c->rx_function=z8530_null_rx; | |
1398 | c->skb=NULL; | |
1399 | c->tx_skb=NULL; | |
1400 | c->tx_next_skb=NULL; | |
1401 | c->mtu=1500; | |
1402 | c->max=0; | |
1403 | c->count=0; | |
1404 | c->status=read_zsreg(c, R0); | |
1405 | c->sync=1; | |
1406 | write_zsreg(c, R3, c->regs[R3]|RxENABLE); | |
1407 | ||
1408 | spin_unlock_irqrestore(c->lock, flags); | |
1409 | return 0; | |
1410 | } | |
1411 | ||
1412 | EXPORT_SYMBOL(z8530_channel_load); | |
1413 | ||
1414 | ||
1415 | /** | |
1416 | * z8530_tx_begin - Begin packet transmission | |
1417 | * @c: The Z8530 channel to kick | |
1418 | * | |
1419 | * This is the speed sensitive side of transmission. If we are called | |
1420 | * and no buffer is being transmitted we commence the next buffer. If | |
1421 | * nothing is queued we idle the sync. | |
1422 | * | |
1423 | * Note: We are handling this code path in the interrupt path, keep it | |
1424 | * fast or bad things will happen. | |
1425 | * | |
1426 | * Called with the lock held. | |
1427 | */ | |
1428 | ||
1429 | static void z8530_tx_begin(struct z8530_channel *c) | |
1430 | { | |
1431 | unsigned long flags; | |
1432 | if(c->tx_skb) | |
1433 | return; | |
1434 | ||
1435 | c->tx_skb=c->tx_next_skb; | |
1436 | c->tx_next_skb=NULL; | |
1437 | c->tx_ptr=c->tx_next_ptr; | |
1438 | ||
1439 | if(c->tx_skb==NULL) | |
1440 | { | |
1441 | /* Idle on */ | |
1442 | if(c->dma_tx) | |
1443 | { | |
1444 | flags=claim_dma_lock(); | |
1445 | disable_dma(c->txdma); | |
1446 | /* | |
1447 | * Check if we crapped out. | |
1448 | */ | |
52e8a6a2 | 1449 | if (get_dma_residue(c->txdma)) |
1da177e4 | 1450 | { |
52e8a6a2 KH |
1451 | c->netdevice->stats.tx_dropped++; |
1452 | c->netdevice->stats.tx_fifo_errors++; | |
1da177e4 LT |
1453 | } |
1454 | release_dma_lock(flags); | |
1455 | } | |
1456 | c->txcount=0; | |
1457 | } | |
1458 | else | |
1459 | { | |
1460 | c->txcount=c->tx_skb->len; | |
1461 | ||
1462 | ||
1463 | if(c->dma_tx) | |
1464 | { | |
1465 | /* | |
1466 | * FIXME. DMA is broken for the original 8530, | |
1467 | * on the older parts we need to set a flag and | |
1468 | * wait for a further TX interrupt to fire this | |
1469 | * stage off | |
1470 | */ | |
1471 | ||
1472 | flags=claim_dma_lock(); | |
1473 | disable_dma(c->txdma); | |
1474 | ||
1475 | /* | |
1476 | * These two are needed by the 8530/85C30 | |
1477 | * and must be issued when idling. | |
1478 | */ | |
1479 | ||
1480 | if(c->dev->type!=Z85230) | |
1481 | { | |
1482 | write_zsctrl(c, RES_Tx_CRC); | |
1483 | write_zsctrl(c, RES_EOM_L); | |
1484 | } | |
1485 | write_zsreg(c, R10, c->regs[10]&~ABUNDER); | |
1486 | clear_dma_ff(c->txdma); | |
1487 | set_dma_addr(c->txdma, virt_to_bus(c->tx_ptr)); | |
1488 | set_dma_count(c->txdma, c->txcount); | |
1489 | enable_dma(c->txdma); | |
1490 | release_dma_lock(flags); | |
1491 | write_zsctrl(c, RES_EOM_L); | |
1492 | write_zsreg(c, R5, c->regs[R5]|TxENAB); | |
1493 | } | |
1494 | else | |
1495 | { | |
1496 | ||
1497 | /* ABUNDER off */ | |
1498 | write_zsreg(c, R10, c->regs[10]); | |
1499 | write_zsctrl(c, RES_Tx_CRC); | |
1500 | ||
1501 | while(c->txcount && (read_zsreg(c,R0)&Tx_BUF_EMP)) | |
1502 | { | |
1503 | write_zsreg(c, R8, *c->tx_ptr++); | |
1504 | c->txcount--; | |
1505 | } | |
1506 | ||
1507 | } | |
1508 | } | |
1509 | /* | |
1510 | * Since we emptied tx_skb we can ask for more | |
1511 | */ | |
1512 | netif_wake_queue(c->netdevice); | |
1513 | } | |
1514 | ||
1515 | /** | |
1516 | * z8530_tx_done - TX complete callback | |
1517 | * @c: The channel that completed a transmit. | |
1518 | * | |
1519 | * This is called when we complete a packet send. We wake the queue, | |
1520 | * start the next packet going and then free the buffer of the existing | |
1521 | * packet. This code is fairly timing sensitive. | |
1522 | * | |
1523 | * Called with the register lock held. | |
52e8a6a2 KH |
1524 | */ |
1525 | ||
1da177e4 LT |
1526 | static void z8530_tx_done(struct z8530_channel *c) |
1527 | { | |
1528 | struct sk_buff *skb; | |
1529 | ||
1530 | /* Actually this can happen.*/ | |
52e8a6a2 | 1531 | if (c->tx_skb == NULL) |
1da177e4 LT |
1532 | return; |
1533 | ||
52e8a6a2 KH |
1534 | skb = c->tx_skb; |
1535 | c->tx_skb = NULL; | |
1da177e4 | 1536 | z8530_tx_begin(c); |
52e8a6a2 KH |
1537 | c->netdevice->stats.tx_packets++; |
1538 | c->netdevice->stats.tx_bytes += skb->len; | |
c14f7e1e | 1539 | dev_consume_skb_irq(skb); |
1da177e4 LT |
1540 | } |
1541 | ||
1542 | /** | |
1543 | * z8530_null_rx - Discard a packet | |
1544 | * @c: The channel the packet arrived on | |
1545 | * @skb: The buffer | |
1546 | * | |
1547 | * We point the receive handler at this function when idle. Instead | |
52e8a6a2 | 1548 | * of processing the frames we get to throw them away. |
1da177e4 LT |
1549 | */ |
1550 | ||
1551 | void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb) | |
1552 | { | |
1553 | dev_kfree_skb_any(skb); | |
1554 | } | |
1555 | ||
1556 | EXPORT_SYMBOL(z8530_null_rx); | |
1557 | ||
1558 | /** | |
1559 | * z8530_rx_done - Receive completion callback | |
1560 | * @c: The channel that completed a receive | |
1561 | * | |
1562 | * A new packet is complete. Our goal here is to get back into receive | |
1563 | * mode as fast as possible. On the Z85230 we could change to using | |
1564 | * ESCC mode, but on the older chips we have no choice. We flip to the | |
1565 | * new buffer immediately in DMA mode so that the DMA of the next | |
1566 | * frame can occur while we are copying the previous buffer to an sk_buff | |
1567 | * | |
1568 | * Called with the lock held | |
1569 | */ | |
1570 | ||
1571 | static void z8530_rx_done(struct z8530_channel *c) | |
1572 | { | |
1573 | struct sk_buff *skb; | |
1574 | int ct; | |
1575 | ||
1576 | /* | |
1577 | * Is our receive engine in DMA mode | |
1578 | */ | |
1579 | ||
1580 | if(c->rxdma_on) | |
1581 | { | |
1582 | /* | |
1583 | * Save the ready state and the buffer currently | |
1584 | * being used as the DMA target | |
1585 | */ | |
1586 | ||
1587 | int ready=c->dma_ready; | |
1588 | unsigned char *rxb=c->rx_buf[c->dma_num]; | |
1589 | unsigned long flags; | |
1590 | ||
1591 | /* | |
25985edc | 1592 | * Complete this DMA. Necessary to find the length |
1da177e4 LT |
1593 | */ |
1594 | ||
1595 | flags=claim_dma_lock(); | |
1596 | ||
1597 | disable_dma(c->rxdma); | |
1598 | clear_dma_ff(c->rxdma); | |
1599 | c->rxdma_on=0; | |
1600 | ct=c->mtu-get_dma_residue(c->rxdma); | |
1601 | if(ct<0) | |
1602 | ct=2; /* Shit happens.. */ | |
1603 | c->dma_ready=0; | |
1604 | ||
1605 | /* | |
1606 | * Normal case: the other slot is free, start the next DMA | |
1607 | * into it immediately. | |
1608 | */ | |
1609 | ||
1610 | if(ready) | |
1611 | { | |
1612 | c->dma_num^=1; | |
1613 | set_dma_mode(c->rxdma, DMA_MODE_READ|0x10); | |
1614 | set_dma_addr(c->rxdma, virt_to_bus(c->rx_buf[c->dma_num])); | |
1615 | set_dma_count(c->rxdma, c->mtu); | |
1616 | c->rxdma_on = 1; | |
1617 | enable_dma(c->rxdma); | |
1618 | /* Stop any frames that we missed the head of | |
1619 | from passing */ | |
1620 | write_zsreg(c, R0, RES_Rx_CRC); | |
1621 | } | |
1622 | else | |
1623 | /* Can't occur as we dont reenable the DMA irq until | |
1624 | after the flip is done */ | |
23efcb73 | 1625 | netdev_warn(c->netdevice, "DMA flip overrun!\n"); |
52e8a6a2 | 1626 | |
1da177e4 | 1627 | release_dma_lock(flags); |
52e8a6a2 | 1628 | |
1da177e4 LT |
1629 | /* |
1630 | * Shove the old buffer into an sk_buff. We can't DMA | |
1631 | * directly into one on a PC - it might be above the 16Mb | |
1632 | * boundary. Optimisation - we could check to see if we | |
1633 | * can avoid the copy. Optimisation 2 - make the memcpy | |
1634 | * a copychecksum. | |
1635 | */ | |
52e8a6a2 KH |
1636 | |
1637 | skb = dev_alloc_skb(ct); | |
1638 | if (skb == NULL) { | |
1639 | c->netdevice->stats.rx_dropped++; | |
23efcb73 | 1640 | netdev_warn(c->netdevice, "Memory squeeze\n"); |
52e8a6a2 | 1641 | } else { |
1da177e4 | 1642 | skb_put(skb, ct); |
27d7ff46 | 1643 | skb_copy_to_linear_data(skb, rxb, ct); |
52e8a6a2 KH |
1644 | c->netdevice->stats.rx_packets++; |
1645 | c->netdevice->stats.rx_bytes += ct; | |
1da177e4 | 1646 | } |
52e8a6a2 KH |
1647 | c->dma_ready = 1; |
1648 | } else { | |
1649 | RT_LOCK; | |
1650 | skb = c->skb; | |
1651 | ||
1da177e4 LT |
1652 | /* |
1653 | * The game we play for non DMA is similar. We want to | |
1654 | * get the controller set up for the next packet as fast | |
1655 | * as possible. We potentially only have one byte + the | |
1656 | * fifo length for this. Thus we want to flip to the new | |
1657 | * buffer and then mess around copying and allocating | |
1658 | * things. For the current case it doesn't matter but | |
25985edc | 1659 | * if you build a system where the sync irq isn't blocked |
1da177e4 LT |
1660 | * by the kernel IRQ disable then you need only block the |
1661 | * sync IRQ for the RT_LOCK area. | |
52e8a6a2 | 1662 | * |
1da177e4 LT |
1663 | */ |
1664 | ct=c->count; | |
52e8a6a2 | 1665 | |
1da177e4 LT |
1666 | c->skb = c->skb2; |
1667 | c->count = 0; | |
1668 | c->max = c->mtu; | |
52e8a6a2 | 1669 | if (c->skb) { |
1da177e4 LT |
1670 | c->dptr = c->skb->data; |
1671 | c->max = c->mtu; | |
52e8a6a2 KH |
1672 | } else { |
1673 | c->count = 0; | |
1da177e4 LT |
1674 | c->max = 0; |
1675 | } | |
1676 | RT_UNLOCK; | |
1677 | ||
1678 | c->skb2 = dev_alloc_skb(c->mtu); | |
52e8a6a2 | 1679 | if (c->skb2 == NULL) |
23efcb73 | 1680 | netdev_warn(c->netdevice, "memory squeeze\n"); |
1da177e4 | 1681 | else |
52e8a6a2 KH |
1682 | skb_put(c->skb2, c->mtu); |
1683 | c->netdevice->stats.rx_packets++; | |
1684 | c->netdevice->stats.rx_bytes += ct; | |
1da177e4 LT |
1685 | } |
1686 | /* | |
1687 | * If we received a frame we must now process it. | |
1688 | */ | |
52e8a6a2 | 1689 | if (skb) { |
1da177e4 | 1690 | skb_trim(skb, ct); |
52e8a6a2 KH |
1691 | c->rx_function(c, skb); |
1692 | } else { | |
1693 | c->netdevice->stats.rx_dropped++; | |
23efcb73 | 1694 | netdev_err(c->netdevice, "Lost a frame\n"); |
1da177e4 LT |
1695 | } |
1696 | } | |
1697 | ||
1698 | /** | |
1699 | * spans_boundary - Check a packet can be ISA DMA'd | |
1700 | * @skb: The buffer to check | |
1701 | * | |
1702 | * Returns true if the buffer cross a DMA boundary on a PC. The poor | |
1703 | * thing can only DMA within a 64K block not across the edges of it. | |
1704 | */ | |
52e8a6a2 | 1705 | |
1da177e4 LT |
1706 | static inline int spans_boundary(struct sk_buff *skb) |
1707 | { | |
1708 | unsigned long a=(unsigned long)skb->data; | |
1709 | a^=(a+skb->len); | |
1710 | if(a&0x00010000) /* If the 64K bit is different.. */ | |
1711 | return 1; | |
1712 | return 0; | |
1713 | } | |
1714 | ||
1715 | /** | |
1716 | * z8530_queue_xmit - Queue a packet | |
1717 | * @c: The channel to use | |
1718 | * @skb: The packet to kick down the channel | |
1719 | * | |
1720 | * Queue a packet for transmission. Because we have rather | |
1721 | * hard to hit interrupt latencies for the Z85230 per packet | |
1722 | * even in DMA mode we do the flip to DMA buffer if needed here | |
1723 | * not in the IRQ. | |
1724 | * | |
1725 | * Called from the network code. The lock is not held at this | |
1726 | * point. | |
1727 | */ | |
1728 | ||
d71a6749 | 1729 | netdev_tx_t z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb) |
1da177e4 LT |
1730 | { |
1731 | unsigned long flags; | |
1732 | ||
1733 | netif_stop_queue(c->netdevice); | |
1734 | if(c->tx_next_skb) | |
d71a6749 SH |
1735 | return NETDEV_TX_BUSY; |
1736 | ||
1da177e4 LT |
1737 | |
1738 | /* PC SPECIFIC - DMA limits */ | |
1739 | ||
1740 | /* | |
1741 | * If we will DMA the transmit and its gone over the ISA bus | |
1742 | * limit, then copy to the flip buffer | |
1743 | */ | |
1744 | ||
1745 | if(c->dma_tx && ((unsigned long)(virt_to_bus(skb->data+skb->len))>=16*1024*1024 || spans_boundary(skb))) | |
1746 | { | |
1747 | /* | |
1748 | * Send the flip buffer, and flip the flippy bit. | |
1749 | * We don't care which is used when just so long as | |
1750 | * we never use the same buffer twice in a row. Since | |
1751 | * only one buffer can be going out at a time the other | |
1752 | * has to be safe. | |
1753 | */ | |
1754 | c->tx_next_ptr=c->tx_dma_buf[c->tx_dma_used]; | |
1755 | c->tx_dma_used^=1; /* Flip temp buffer */ | |
d626f62b | 1756 | skb_copy_from_linear_data(skb, c->tx_next_ptr, skb->len); |
1da177e4 LT |
1757 | } |
1758 | else | |
1759 | c->tx_next_ptr=skb->data; | |
1760 | RT_LOCK; | |
1761 | c->tx_next_skb=skb; | |
1762 | RT_UNLOCK; | |
1763 | ||
1764 | spin_lock_irqsave(c->lock, flags); | |
1765 | z8530_tx_begin(c); | |
1766 | spin_unlock_irqrestore(c->lock, flags); | |
1767 | ||
d71a6749 | 1768 | return NETDEV_TX_OK; |
1da177e4 LT |
1769 | } |
1770 | ||
1771 | EXPORT_SYMBOL(z8530_queue_xmit); | |
1772 | ||
1da177e4 LT |
1773 | /* |
1774 | * Module support | |
1775 | */ | |
15c0665c | 1776 | static const char banner[] __initconst = |
5ee0d593 | 1777 | KERN_INFO "Generic Z85C30/Z85230 interface driver v0.02\n"; |
1da177e4 LT |
1778 | |
1779 | static int __init z85230_init_driver(void) | |
1780 | { | |
1781 | printk(banner); | |
1782 | return 0; | |
1783 | } | |
1784 | module_init(z85230_init_driver); | |
1785 | ||
1786 | static void __exit z85230_cleanup_driver(void) | |
1787 | { | |
1788 | } | |
1789 | module_exit(z85230_cleanup_driver); | |
1790 | ||
1791 | MODULE_AUTHOR("Red Hat Inc."); | |
1792 | MODULE_DESCRIPTION("Z85x30 synchronous driver core"); | |
1793 | MODULE_LICENSE("GPL"); |