]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Wireless LAN device configuration | |
3 | # | |
4 | ||
5 | menu "Wireless LAN (non-hamradio)" | |
6 | depends on NETDEVICES | |
7 | ||
8 | config NET_RADIO | |
c1783454 | 9 | bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions" |
d86b5e0e | 10 | select WIRELESS_EXT |
1da177e4 LT |
11 | ---help--- |
12 | Support for wireless LANs and everything having to do with radio, | |
13 | but not with amateur radio or FM broadcasting. | |
14 | ||
15 | Saying Y here also enables the Wireless Extensions (creates | |
16 | /proc/net/wireless and enables iwconfig access). The Wireless | |
17 | Extension is a generic API allowing a driver to expose to the user | |
18 | space configuration and statistics specific to common Wireless LANs. | |
19 | The beauty of it is that a single set of tool can support all the | |
20 | variations of Wireless LANs, regardless of their type (as long as | |
21 | the driver supports Wireless Extension). Another advantage is that | |
22 | these parameters may be changed on the fly without restarting the | |
23 | driver (or Linux). If you wish to use Wireless Extensions with | |
24 | wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch | |
25 | the tools from | |
26 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. | |
27 | ||
711e2c33 JT |
28 | config NET_WIRELESS_RTNETLINK |
29 | bool "Wireless Extension API over RtNetlink" | |
868d2c1e | 30 | depends on NET_RADIO |
711e2c33 JT |
31 | ---help--- |
32 | Support the Wireless Extension API over the RtNetlink socket | |
33 | in addition to the traditional ioctl interface (selected above). | |
34 | ||
35 | For now, few tools use this facility, but it might grow in the | |
36 | future. The only downside is that it adds 4.5 kB to your kernel. | |
37 | ||
1da177e4 LT |
38 | # Note : the cards are obsolete (can't buy them anymore), but the drivers |
39 | # are not, as people are still using them... | |
40 | comment "Obsolete Wireless cards support (pre-802.11)" | |
41 | depends on NET_RADIO && (INET || ISA || PCMCIA) | |
42 | ||
43 | config STRIP | |
44 | tristate "STRIP (Metricom starmode radio IP)" | |
45 | depends on NET_RADIO && INET | |
46 | ---help--- | |
47 | Say Y if you have a Metricom radio and intend to use Starmode Radio | |
48 | IP. STRIP is a radio protocol developed for the MosquitoNet project | |
49 | (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet | |
50 | traffic using Metricom radios. Metricom radios are small, battery | |
51 | powered, 100kbit/sec packet radio transceivers, about the size and | |
52 | weight of a cellular telephone. (You may also have heard them called | |
53 | "Metricom modems" but we avoid the term "modem" because it misleads | |
54 | many people into thinking that you can plug a Metricom modem into a | |
55 | phone line and use it as a modem.) | |
56 | ||
57 | You can use STRIP on any Linux machine with a serial port, although | |
58 | it is obviously most useful for people with laptop computers. If you | |
59 | think you might get a Metricom radio in the future, there is no harm | |
60 | in saying Y to STRIP now, except that it makes the kernel a bit | |
61 | bigger. | |
62 | ||
63 | To compile this as a module, choose M here: the module will be | |
64 | called strip. | |
65 | ||
66 | config ARLAN | |
67 | tristate "Aironet Arlan 655 & IC2200 DS support" | |
68 | depends on NET_RADIO && ISA && !64BIT | |
69 | ---help--- | |
70 | Aironet makes Arlan, a class of wireless LAN adapters. These use the | |
71 | www.Telxon.com chip, which is also used on several similar cards. | |
72 | This driver is tested on the 655 and IC2200 series cards. Look at | |
73 | <http://www.ylenurme.ee/~elmer/655/> for the latest information. | |
74 | ||
75 | The driver is built as two modules, arlan and arlan-proc. The latter | |
76 | is the /proc interface and is not needed most of time. | |
77 | ||
78 | On some computers the card ends up in non-valid state after some | |
79 | time. Use a ping-reset script to clear it. | |
80 | ||
81 | config WAVELAN | |
82 | tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" | |
83 | depends on NET_RADIO && ISA | |
84 | ---help--- | |
85 | The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is | |
86 | a Radio LAN (wireless Ethernet-like Local Area Network) using the | |
87 | radio frequencies 900 MHz and 2.4 GHz. | |
88 | ||
89 | This driver support the ISA version of the WaveLAN card. A separate | |
90 | driver for the PCMCIA (PC-card) hardware is available in David | |
91 | Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> | |
92 | for location). | |
93 | ||
94 | If you want to use an ISA WaveLAN card under Linux, say Y and read | |
95 | the Ethernet-HOWTO, available from | |
96 | <http://www.tldp.org/docs.html#howto>. Some more specific | |
97 | information is contained in | |
98 | <file:Documentation/networking/wavelan.txt> and in the source code | |
99 | <file:drivers/net/wavelan.p.h>. | |
100 | ||
101 | You will also need the wireless tools package available from | |
102 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. | |
103 | Please read the man pages contained therein. | |
104 | ||
105 | To compile this driver as a module, choose M here: the module will be | |
106 | called wavelan. | |
107 | ||
108 | config PCMCIA_WAVELAN | |
109 | tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" | |
110 | depends on NET_RADIO && PCMCIA | |
111 | help | |
112 | Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA | |
113 | (PC-card) wireless Ethernet networking card to your computer. This | |
114 | driver is for the non-IEEE-802.11 Wavelan cards. | |
115 | ||
116 | To compile this driver as a module, choose M here: the module will be | |
117 | called wavelan_cs. If unsure, say N. | |
118 | ||
119 | config PCMCIA_NETWAVE | |
120 | tristate "Xircom Netwave AirSurfer Pcmcia wireless support" | |
121 | depends on NET_RADIO && PCMCIA | |
122 | help | |
123 | Say Y here if you intend to attach this type of PCMCIA (PC-card) | |
124 | wireless Ethernet networking card to your computer. | |
125 | ||
126 | To compile this driver as a module, choose M here: the module will be | |
127 | called netwave_cs. If unsure, say N. | |
128 | ||
129 | comment "Wireless 802.11 Frequency Hopping cards support" | |
130 | depends on NET_RADIO && PCMCIA | |
131 | ||
132 | config PCMCIA_RAYCS | |
133 | tristate "Aviator/Raytheon 2.4MHz wireless support" | |
134 | depends on NET_RADIO && PCMCIA | |
135 | ---help--- | |
136 | Say Y here if you intend to attach an Aviator/Raytheon PCMCIA | |
137 | (PC-card) wireless Ethernet networking card to your computer. | |
138 | Please read the file <file:Documentation/networking/ray_cs.txt> for | |
139 | details. | |
140 | ||
141 | To compile this driver as a module, choose M here: the module will be | |
142 | called ray_cs. If unsure, say N. | |
143 | ||
144 | comment "Wireless 802.11b ISA/PCI cards support" | |
145 | depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) | |
146 | ||
2c86c275 JK |
147 | config IPW2100 |
148 | tristate "Intel PRO/Wireless 2100 Network Connection" | |
4ddc1651 | 149 | depends on NET_RADIO && PCI |
2c86c275 | 150 | select FW_LOADER |
4ddc1651 | 151 | select IEEE80211 |
2c86c275 JK |
152 | ---help--- |
153 | A driver for the Intel PRO/Wireless 2100 Network | |
154 | Connection 802.11b wireless network adapter. | |
155 | ||
156 | See <file:Documentation/networking/README.ipw2100> for information on | |
157 | the capabilities currently enabled in this driver and for tips | |
158 | for debugging issues and problems. | |
159 | ||
160 | In order to use this driver, you will need a firmware image for it. | |
161 | You can obtain the firmware from | |
162 | <http://ipw2100.sf.net/>. Once you have the firmware image, you | |
afcd0241 | 163 | will need to place it in /lib/firmware. |
2c86c275 JK |
164 | |
165 | You will also very likely need the Wireless Tools in order to | |
166 | configure your card: | |
167 | ||
168 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. | |
169 | ||
170 | If you want to compile the driver as a module ( = code which can be | |
9c782e3b | 171 | inserted in and removed from the running kernel whenever you want), |
2c86c275 JK |
172 | say M here and read <file:Documentation/modules.txt>. The module |
173 | will be called ipw2100.ko. | |
174 | ||
53788015 | 175 | config IPW2100_MONITOR |
2c86c275 JK |
176 | bool "Enable promiscuous mode" |
177 | depends on IPW2100 | |
178 | ---help--- | |
179 | Enables promiscuous/monitor mode support for the ipw2100 driver. | |
180 | With this feature compiled into the driver, you can switch to | |
181 | promiscuous mode via the Wireless Tool's Monitor mode. While in this | |
182 | mode, no packets can be sent. | |
183 | ||
0f52bf90 | 184 | config IPW2100_DEBUG |
2c86c275 JK |
185 | bool "Enable full debugging output in IPW2100 module." |
186 | depends on IPW2100 | |
187 | ---help--- | |
188 | This option will enable debug tracing output for the IPW2100. | |
189 | ||
190 | This will result in the kernel module being ~60k larger. You can | |
191 | control which debug output is sent to the kernel log by setting the | |
192 | value in | |
193 | ||
194 | /sys/bus/pci/drivers/ipw2100/debug_level | |
195 | ||
196 | This entry will only exist if this option is enabled. | |
197 | ||
198 | If you are not trying to debug or develop the IPW2100 driver, you | |
199 | most likely want to say N here. | |
200 | ||
43f66a6c JK |
201 | config IPW2200 |
202 | tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" | |
4ddc1651 | 203 | depends on NET_RADIO && PCI |
43f66a6c | 204 | select FW_LOADER |
4ddc1651 | 205 | select IEEE80211 |
43f66a6c JK |
206 | ---help--- |
207 | A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network | |
208 | Connection adapters. | |
209 | ||
210 | See <file:Documentation/networking/README.ipw2200> for | |
211 | information on the capabilities currently enabled in this | |
212 | driver and for tips for debugging issues and problems. | |
213 | ||
214 | In order to use this driver, you will need a firmware image for it. | |
215 | You can obtain the firmware from | |
216 | <http://ipw2200.sf.net/>. See the above referenced README.ipw2200 | |
47c51431 | 217 | for information on where to install the firmware images. |
43f66a6c JK |
218 | |
219 | You will also very likely need the Wireless Tools in order to | |
220 | configure your card: | |
221 | ||
222 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. | |
223 | ||
224 | If you want to compile the driver as a module ( = code which can be | |
9c782e3b | 225 | inserted in and removed from the running kernel whenever you want), |
43f66a6c JK |
226 | say M here and read <file:Documentation/modules.txt>. The module |
227 | will be called ipw2200.ko. | |
228 | ||
2c0f6316 AH |
229 | config IPW2200_MONITOR |
230 | bool "Enable promiscuous mode" | |
231 | depends on IPW2200 | |
232 | ---help--- | |
233 | Enables promiscuous/monitor mode support for the ipw2200 driver. | |
234 | With this feature compiled into the driver, you can switch to | |
235 | promiscuous mode via the Wireless Tool's Monitor mode. While in this | |
236 | mode, no packets can be sent. | |
237 | ||
34f8ae46 ZY |
238 | config IPW2200_RADIOTAP |
239 | bool "Enable radiotap format 802.11 raw packet support" | |
240 | depends on IPW2200_MONITOR | |
241 | ||
242 | config IPW2200_PROMISCUOUS | |
243 | bool "Enable creation of a RF radiotap promiscuous interface" | |
244 | depends on IPW2200_MONITOR | |
245 | select IPW2200_RADIOTAP | |
246 | ---help--- | |
247 | Enables the creation of a second interface prefixed 'rtap'. | |
248 | This second interface will provide every received in radiotap | |
249 | format. | |
250 | ||
251 | This is useful for performing wireless network analysis while | |
252 | maintaining an active association. | |
253 | ||
254 | Example usage: | |
255 | ||
256 | % modprobe ipw2200 rtap_iface=1 | |
257 | % ifconfig rtap0 up | |
258 | % tethereal -i rtap0 | |
259 | ||
260 | If you do not specify 'rtap_iface=1' as a module parameter then | |
261 | the rtap interface will not be created and you will need to turn | |
262 | it on via sysfs: | |
263 | ||
264 | % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface | |
265 | ||
e43e3c1e | 266 | config IPW2200_QOS |
2c0f6316 AH |
267 | bool "Enable QoS support" |
268 | depends on IPW2200 && EXPERIMENTAL | |
269 | ||
0f52bf90 | 270 | config IPW2200_DEBUG |
43f66a6c JK |
271 | bool "Enable full debugging output in IPW2200 module." |
272 | depends on IPW2200 | |
273 | ---help--- | |
274 | This option will enable debug tracing output for the IPW2200. | |
275 | ||
276 | This will result in the kernel module being ~100k larger. You can | |
277 | control which debug output is sent to the kernel log by setting the | |
278 | value in | |
279 | ||
280 | /sys/bus/pci/drivers/ipw2200/debug_level | |
281 | ||
282 | This entry will only exist if this option is enabled. | |
283 | ||
284 | To set a value, simply echo an 8-byte hex value to the same file: | |
285 | ||
286 | % echo 0x00000FFO > /sys/bus/pci/drivers/ipw2200/debug_level | |
287 | ||
288 | You can find the list of debug mask values in | |
289 | drivers/net/wireless/ipw2200.h | |
290 | ||
291 | If you are not trying to debug or develop the IPW2200 driver, you | |
292 | most likely want to say N here. | |
293 | ||
1da177e4 LT |
294 | config AIRO |
295 | tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" | |
a39d3e79 AB |
296 | depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN) |
297 | select CRYPTO | |
1da177e4 LT |
298 | ---help--- |
299 | This is the standard Linux driver to support Cisco/Aironet ISA and | |
300 | PCI 802.11 wireless cards. | |
301 | It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X | |
302 | - with or without encryption) as well as card before the Cisco | |
47c51431 | 303 | acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). |
1da177e4 LT |
304 | |
305 | This driver support both the standard Linux Wireless Extensions | |
306 | and Cisco proprietary API, so both the Linux Wireless Tools and the | |
307 | Cisco Linux utilities can be used to configure the card. | |
308 | ||
309 | The driver can be compiled as a module and will be named "airo". | |
310 | ||
311 | config HERMES | |
312 | tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" | |
313 | depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA) | |
314 | ---help--- | |
315 | A driver for 802.11b wireless cards based based on the "Hermes" or | |
316 | Intersil HFA384x (Prism 2) MAC controller. This includes the vast | |
317 | majority of the PCMCIA 802.11b cards (which are nearly all rebadges) | |
318 | - except for the Cisco/Aironet cards. Cards supported include the | |
319 | Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, | |
320 | Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, | |
321 | IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear | |
322 | MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel | |
323 | PRO/Wireless, and Symbol Spectrum24 High Rate amongst others. | |
324 | ||
325 | This option includes the guts of the driver, but in order to | |
326 | actually use a card you will also need to enable support for PCMCIA | |
327 | Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. | |
328 | ||
329 | You will also very likely also need the Wireless Tools in order to | |
330 | configure your card and that /etc/pcmcia/wireless.opts works : | |
331 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> | |
332 | ||
333 | config APPLE_AIRPORT | |
334 | tristate "Apple Airport support (built-in)" | |
335 | depends on PPC_PMAC && HERMES | |
336 | help | |
337 | Say Y here to support the Airport 802.11b wireless Ethernet hardware | |
338 | built into the Macintosh iBook and other recent PowerPC-based | |
339 | Macintosh machines. This is essentially a Lucent Orinoco card with | |
f1f56623 MB |
340 | a non-standard interface. |
341 | ||
342 | This driver does not support the Airport Extreme (802.11b/g). Use | |
343 | the BCM43xx driver for Airport Extreme cards. | |
1da177e4 LT |
344 | |
345 | config PLX_HERMES | |
8c09e16b PR |
346 | tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" |
347 | depends on PCI && HERMES | |
1da177e4 LT |
348 | help |
349 | Enable support for PCMCIA cards supported by the "Hermes" (aka | |
350 | orinoco) driver when used in PLX9052 based PCI adaptors. These | |
351 | adaptors are not a full PCMCIA controller but act as a more limited | |
352 | PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that | |
353 | 802.11b PCMCIA cards can be used in desktop machines. The Netgear | |
354 | MA301 is such an adaptor. | |
355 | ||
1da177e4 | 356 | config TMD_HERMES |
8c09e16b PR |
357 | tristate "Hermes in TMD7160 based PCI adaptor support" |
358 | depends on PCI && HERMES | |
1da177e4 LT |
359 | help |
360 | Enable support for PCMCIA cards supported by the "Hermes" (aka | |
361 | orinoco) driver when used in TMD7160 based PCI adaptors. These | |
362 | adaptors are not a full PCMCIA controller but act as a more limited | |
363 | PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that | |
364 | 802.11b PCMCIA cards can be used in desktop machines. | |
365 | ||
ec829051 PR |
366 | config NORTEL_HERMES |
367 | tristate "Nortel emobility PCI adaptor support" | |
368 | depends on PCI && HERMES | |
369 | help | |
370 | Enable support for PCMCIA cards supported by the "Hermes" (aka | |
371 | orinoco) driver when used in Nortel emobility PCI adaptors. These | |
372 | adaptors are not full PCMCIA controllers, but act as a more limited | |
373 | PCI <-> PCMCIA bridge. | |
374 | ||
1da177e4 | 375 | config PCI_HERMES |
8c09e16b PR |
376 | tristate "Prism 2.5 PCI 802.11b adaptor support" |
377 | depends on PCI && HERMES | |
1da177e4 LT |
378 | help |
379 | Enable support for PCI and mini-PCI 802.11b wireless NICs based on | |
380 | the Prism 2.5 chipset. These are true PCI cards, not the 802.11b | |
381 | PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also | |
382 | common. Some of the built-in wireless adaptors in laptops are of | |
383 | this variety. | |
384 | ||
385 | config ATMEL | |
386 | tristate "Atmel at76c50x chipset 802.11b support" | |
694a464e | 387 | depends on NET_RADIO && (PCI || PCMCIA) |
1da177e4 LT |
388 | select FW_LOADER |
389 | select CRC32 | |
390 | ---help--- | |
391 | A driver 802.11b wireless cards based on the Atmel fast-vnet | |
392 | chips. This driver supports standard Linux wireless extensions. | |
393 | ||
394 | Many cards based on this chipset do not have flash memory | |
395 | and need their firmware loaded at start-up. If yours is | |
396 | one of these, you will need to provide a firmware image | |
397 | to be loaded into the card by the driver. The Atmel | |
398 | firmware package can be downloaded from | |
399 | <http://www.thekelleys.org.uk/atmel> | |
400 | ||
401 | config PCI_ATMEL | |
402 | tristate "Atmel at76c506 PCI cards" | |
403 | depends on ATMEL && PCI | |
404 | ---help--- | |
405 | Enable support for PCI and mini-PCI cards containing the | |
406 | Atmel at76c506 chip. | |
407 | ||
408 | # If Pcmcia is compiled in, offer Pcmcia cards... | |
409 | comment "Wireless 802.11b Pcmcia/Cardbus cards support" | |
410 | depends on NET_RADIO && PCMCIA | |
411 | ||
412 | config PCMCIA_HERMES | |
413 | tristate "Hermes PCMCIA card support" | |
414 | depends on NET_RADIO && PCMCIA && HERMES | |
415 | ---help--- | |
416 | A driver for "Hermes" chipset based PCMCIA wireless adaptors, such | |
417 | as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ | |
418 | EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and | |
419 | others). It should also be usable on various Prism II based cards | |
420 | such as the Linksys, D-Link and Farallon Skyline. It should also | |
421 | work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. | |
422 | ||
423 | To use your PC-cards, you will need supporting software from David | |
424 | Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> | |
425 | for location). You also want to check out the PCMCIA-HOWTO, | |
426 | available from <http://www.tldp.org/docs.html#howto>. | |
427 | ||
428 | You will also very likely also need the Wireless Tools in order to | |
429 | configure your card and that /etc/pcmcia/wireless.opts works: | |
430 | <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. | |
431 | ||
3a48c4c2 PR |
432 | config PCMCIA_SPECTRUM |
433 | tristate "Symbol Spectrum24 Trilogy PCMCIA card support" | |
434 | depends on NET_RADIO && PCMCIA && HERMES | |
e4a9af98 | 435 | select FW_LOADER |
3a48c4c2 PR |
436 | ---help--- |
437 | ||
438 | This is a driver for 802.11b cards using RAM-loadable Symbol | |
439 | firmware, such as Symbol Wireless Networker LA4100, CompactFlash | |
440 | cards by Socket Communications and Intel PRO/Wireless 2011B. | |
441 | ||
442 | This driver requires firmware download on startup. Utilities | |
443 | for downloading Symbol firmware are available at | |
444 | <http://sourceforge.net/projects/orinoco/> | |
445 | ||
1da177e4 LT |
446 | config AIRO_CS |
447 | tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" | |
ab62c1e1 | 448 | depends on NET_RADIO && PCMCIA && (BROKEN || !M32R) |
a39d3e79 | 449 | select CRYPTO |
8fa9ea18 | 450 | select CRYPTO_AES |
1da177e4 LT |
451 | ---help--- |
452 | This is the standard Linux driver to support Cisco/Aironet PCMCIA | |
453 | 802.11 wireless cards. This driver is the same as the Aironet | |
454 | driver part of the Linux Pcmcia package. | |
455 | It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X | |
456 | - with or without encryption) as well as card before the Cisco | |
47c51431 | 457 | acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also |
1da177e4 LT |
458 | supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom |
459 | 802.11b cards. | |
460 | ||
461 | This driver support both the standard Linux Wireless Extensions | |
462 | and Cisco proprietary API, so both the Linux Wireless Tools and the | |
463 | Cisco Linux utilities can be used to configure the card. | |
464 | ||
465 | To use your PC-cards, you will need supporting software from David | |
466 | Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> | |
467 | for location). You also want to check out the PCMCIA-HOWTO, | |
468 | available from <http://www.tldp.org/docs.html#howto>. | |
469 | ||
470 | config PCMCIA_ATMEL | |
471 | tristate "Atmel at76c502/at76c504 PCMCIA cards" | |
472 | depends on NET_RADIO && ATMEL && PCMCIA | |
473 | select FW_LOADER | |
474 | select CRC32 | |
475 | ---help--- | |
476 | Enable support for PCMCIA cards containing the | |
477 | Atmel at76c502 and at76c504 chips. | |
478 | ||
479 | config PCMCIA_WL3501 | |
480 | tristate "Planet WL3501 PCMCIA cards" | |
481 | depends on NET_RADIO && EXPERIMENTAL && PCMCIA | |
482 | ---help--- | |
483 | A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. | |
484 | It has basic support for Linux wireless extensions and initial | |
485 | micro support for ethtool. | |
486 | ||
487 | comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support" | |
488 | depends on NET_RADIO && PCI | |
489 | config PRISM54 | |
490 | tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' | |
491 | depends on PCI && NET_RADIO && EXPERIMENTAL | |
492 | select FW_LOADER | |
493 | ---help--- | |
494 | Enable PCI and Cardbus support for the following chipset based cards: | |
495 | ||
496 | ISL3880 - Prism GT 802.11 b/g | |
497 | ISL3877 - Prism Indigo 802.11 a | |
498 | ISL3890 - Prism Duette 802.11 a/b/g | |
499 | ||
500 | For a complete list of supported cards visit <http://prism54.org>. | |
501 | Here is the latest confirmed list of supported cards: | |
502 | ||
c8920ba0 | 503 | 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) |
1da177e4 LT |
504 | Allnet ALL0271 PCI Card |
505 | Compex WL54G Cardbus Card | |
506 | Corega CG-WLCB54GT Cardbus Card | |
507 | D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650 | |
508 | I-O Data WN-G54/CB Cardbus Card | |
509 | Kobishi XG-300 aka Z-Com Cardbus Card | |
510 | Netgear WG511 Cardbus Card | |
511 | Ovislink WL-5400PCI PCI Card | |
512 | Peabird WLG-PCI PCI Card | |
513 | Sitecom WL-100i Cardbus Card | |
514 | Sitecom WL-110i PCI Card | |
515 | SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card | |
516 | SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card | |
517 | SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card | |
518 | Z-Com XG-900 PCI Card | |
519 | Zyxel G-100 Cardbus Card | |
520 | ||
521 | If you enable this you will need a firmware file as well. | |
522 | You will need to copy this to /usr/lib/hotplug/firmware/isl3890. | |
523 | You can get this non-GPL'd firmware file from the Prism54 project page: | |
524 | <http://prism54.org> | |
525 | You will also need the /etc/hotplug/firmware.agent script from | |
526 | a current hotplug package. | |
527 | ||
528 | Note: You need a motherboard with DMA support to use any of these cards | |
529 | ||
530 | If you want to compile the driver as a module ( = code which can be | |
531 | inserted in and removed from the running kernel whenever you want), | |
532 | say M here and read <file:Documentation/modules.txt>. The module | |
533 | will be called prism54.ko. | |
534 | ||
5c601d0c PM |
535 | config USB_ZD1201 |
536 | tristate "USB ZD1201 based Wireless device support" | |
537 | depends on USB && NET_RADIO | |
538 | select FW_LOADER | |
539 | ---help--- | |
540 | Say Y if you want to use wireless LAN adapters based on the ZyDAS | |
541 | ZD1201 chip. | |
542 | ||
543 | This driver makes the adapter appear as a normal Ethernet interface, | |
544 | typically on wlan0. | |
545 | ||
546 | The zd1201 device requires external firmware to be loaded. | |
547 | This can be found at http://linux-lc100020.sourceforge.net/ | |
548 | ||
549 | To compile this driver as a module, choose M here: the | |
550 | module will be called zd1201. | |
551 | ||
ff1d2767 | 552 | source "drivers/net/wireless/hostap/Kconfig" |
77db31ea | 553 | source "drivers/net/wireless/bcm43xx/Kconfig" |
e85d0918 | 554 | source "drivers/net/wireless/zd1211rw/Kconfig" |
70e5e983 | 555 | |
1da177e4 LT |
556 | # yes, this works even when no drivers are selected |
557 | config NET_WIRELESS | |
558 | bool | |
559 | depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) | |
560 | default y | |
561 | ||
562 | endmenu | |
563 |