]>
Commit | Line | Data |
---|---|---|
5e3dd157 KV |
1 | /* |
2 | * Copyright (c) 2005-2011 Atheros Communications Inc. | |
3 | * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. | |
4 | * | |
5 | * Permission to use, copy, modify, and/or distribute this software for any | |
6 | * purpose with or without fee is hereby granted, provided that the above | |
7 | * copyright notice and this permission notice appear in all copies. | |
8 | * | |
9 | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
10 | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
11 | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
12 | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
13 | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
14 | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
15 | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
16 | */ | |
17 | ||
18 | #ifndef _WMI_H_ | |
19 | #define _WMI_H_ | |
20 | ||
21 | #include <linux/types.h> | |
22 | #include <net/mac80211.h> | |
23 | ||
24 | /* | |
25 | * This file specifies the WMI interface for the Unified Software | |
26 | * Architecture. | |
27 | * | |
28 | * It includes definitions of all the commands and events. Commands are | |
29 | * messages from the host to the target. Events and Replies are messages | |
30 | * from the target to the host. | |
31 | * | |
32 | * Ownership of correctness in regards to WMI commands belongs to the host | |
33 | * driver and the target is not required to validate parameters for value, | |
34 | * proper range, or any other checking. | |
35 | * | |
36 | * Guidelines for extending this interface are below. | |
37 | * | |
38 | * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff | |
39 | * | |
40 | * 2. Use ONLY u32 type for defining member variables within WMI | |
41 | * command/event structures. Do not use u8, u16, bool or | |
42 | * enum types within these structures. | |
43 | * | |
44 | * 3. DO NOT define bit fields within structures. Implement bit fields | |
45 | * using masks if necessary. Do not use the programming language's bit | |
46 | * field definition. | |
47 | * | |
48 | * 4. Define macros for encode/decode of u8, u16 fields within | |
49 | * the u32 variables. Use these macros for set/get of these fields. | |
50 | * Try to use this to optimize the structure without bloating it with | |
51 | * u32 variables for every lower sized field. | |
52 | * | |
53 | * 5. Do not use PACK/UNPACK attributes for the structures as each member | |
54 | * variable is already 4-byte aligned by virtue of being a u32 | |
55 | * type. | |
56 | * | |
57 | * 6. Comment each parameter part of the WMI command/event structure by | |
58 | * using the 2 stars at the begining of C comment instead of one star to | |
59 | * enable HTML document generation using Doxygen. | |
60 | * | |
61 | */ | |
62 | ||
63 | /* Control Path */ | |
64 | struct wmi_cmd_hdr { | |
65 | __le32 cmd_id; | |
66 | } __packed; | |
67 | ||
68 | #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF | |
69 | #define WMI_CMD_HDR_CMD_ID_LSB 0 | |
70 | #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 | |
71 | #define WMI_CMD_HDR_PLT_PRIV_LSB 24 | |
72 | ||
73 | #define HTC_PROTOCOL_VERSION 0x0002 | |
74 | #define WMI_PROTOCOL_VERSION 0x0002 | |
75 | ||
cff990ce MK |
76 | enum wmi_service { |
77 | WMI_SERVICE_BEACON_OFFLOAD = 0, | |
78 | WMI_SERVICE_SCAN_OFFLOAD, | |
79 | WMI_SERVICE_ROAM_OFFLOAD, | |
80 | WMI_SERVICE_BCN_MISS_OFFLOAD, | |
81 | WMI_SERVICE_STA_PWRSAVE, | |
82 | WMI_SERVICE_STA_ADVANCED_PWRSAVE, | |
83 | WMI_SERVICE_AP_UAPSD, | |
84 | WMI_SERVICE_AP_DFS, | |
85 | WMI_SERVICE_11AC, | |
86 | WMI_SERVICE_BLOCKACK, | |
87 | WMI_SERVICE_PHYERR, | |
88 | WMI_SERVICE_BCN_FILTER, | |
89 | WMI_SERVICE_RTT, | |
90 | WMI_SERVICE_RATECTRL, | |
91 | WMI_SERVICE_WOW, | |
92 | WMI_SERVICE_RATECTRL_CACHE, | |
93 | WMI_SERVICE_IRAM_TIDS, | |
94 | WMI_SERVICE_ARPNS_OFFLOAD, | |
95 | WMI_SERVICE_NLO, | |
96 | WMI_SERVICE_GTK_OFFLOAD, | |
97 | WMI_SERVICE_SCAN_SCH, | |
98 | WMI_SERVICE_CSA_OFFLOAD, | |
99 | WMI_SERVICE_CHATTER, | |
100 | WMI_SERVICE_COEX_FREQAVOID, | |
101 | WMI_SERVICE_PACKET_POWER_SAVE, | |
102 | WMI_SERVICE_FORCE_FW_HANG, | |
103 | WMI_SERVICE_GPIO, | |
104 | WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, | |
105 | WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, | |
106 | WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, | |
107 | WMI_SERVICE_STA_KEEP_ALIVE, | |
108 | WMI_SERVICE_TX_ENCAP, | |
109 | WMI_SERVICE_BURST, | |
110 | WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, | |
111 | WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, | |
ca996ec5 MK |
112 | WMI_SERVICE_ROAM_SCAN_OFFLOAD, |
113 | WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, | |
114 | WMI_SERVICE_EARLY_RX, | |
115 | WMI_SERVICE_STA_SMPS, | |
116 | WMI_SERVICE_FWTEST, | |
117 | WMI_SERVICE_STA_WMMAC, | |
118 | WMI_SERVICE_TDLS, | |
119 | WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, | |
120 | WMI_SERVICE_ADAPTIVE_OCS, | |
121 | WMI_SERVICE_BA_SSN_SUPPORT, | |
122 | WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, | |
123 | WMI_SERVICE_WLAN_HB, | |
124 | WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, | |
125 | WMI_SERVICE_BATCH_SCAN, | |
126 | WMI_SERVICE_QPOWER, | |
127 | WMI_SERVICE_PLMREQ, | |
128 | WMI_SERVICE_THERMAL_MGMT, | |
129 | WMI_SERVICE_RMC, | |
130 | WMI_SERVICE_MHF_OFFLOAD, | |
131 | WMI_SERVICE_COEX_SAR, | |
132 | WMI_SERVICE_BCN_TXRATE_OVERRIDE, | |
133 | WMI_SERVICE_NAN, | |
134 | WMI_SERVICE_L1SS_STAT, | |
135 | WMI_SERVICE_ESTIMATE_LINKSPEED, | |
136 | WMI_SERVICE_OBSS_SCAN, | |
137 | WMI_SERVICE_TDLS_OFFCHAN, | |
138 | WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, | |
139 | WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, | |
140 | WMI_SERVICE_IBSS_PWRSAVE, | |
141 | WMI_SERVICE_LPASS, | |
142 | WMI_SERVICE_EXTSCAN, | |
143 | WMI_SERVICE_D0WOW, | |
144 | WMI_SERVICE_HSOFFLOAD, | |
145 | WMI_SERVICE_ROAM_HO_OFFLOAD, | |
146 | WMI_SERVICE_RX_FULL_REORDER, | |
147 | WMI_SERVICE_DHCP_OFFLOAD, | |
148 | WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, | |
149 | WMI_SERVICE_MDNS_OFFLOAD, | |
150 | WMI_SERVICE_SAP_AUTH_OFFLOAD, | |
52c22a63 | 151 | WMI_SERVICE_ATF, |
de0c789b | 152 | WMI_SERVICE_COEX_GPIO, |
840357cc RM |
153 | WMI_SERVICE_ENHANCED_PROXY_STA, |
154 | WMI_SERVICE_TT, | |
155 | WMI_SERVICE_PEER_CACHING, | |
156 | WMI_SERVICE_AUX_SPECTRAL_INTF, | |
157 | WMI_SERVICE_AUX_CHAN_LOAD_INTF, | |
158 | WMI_SERVICE_BSS_CHANNEL_INFO_64, | |
c4f8c836 MK |
159 | |
160 | /* keep last */ | |
161 | WMI_SERVICE_MAX, | |
cff990ce MK |
162 | }; |
163 | ||
164 | enum wmi_10x_service { | |
165 | WMI_10X_SERVICE_BEACON_OFFLOAD = 0, | |
166 | WMI_10X_SERVICE_SCAN_OFFLOAD, | |
167 | WMI_10X_SERVICE_ROAM_OFFLOAD, | |
168 | WMI_10X_SERVICE_BCN_MISS_OFFLOAD, | |
169 | WMI_10X_SERVICE_STA_PWRSAVE, | |
170 | WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, | |
171 | WMI_10X_SERVICE_AP_UAPSD, | |
172 | WMI_10X_SERVICE_AP_DFS, | |
173 | WMI_10X_SERVICE_11AC, | |
174 | WMI_10X_SERVICE_BLOCKACK, | |
175 | WMI_10X_SERVICE_PHYERR, | |
176 | WMI_10X_SERVICE_BCN_FILTER, | |
177 | WMI_10X_SERVICE_RTT, | |
178 | WMI_10X_SERVICE_RATECTRL, | |
179 | WMI_10X_SERVICE_WOW, | |
180 | WMI_10X_SERVICE_RATECTRL_CACHE, | |
181 | WMI_10X_SERVICE_IRAM_TIDS, | |
182 | WMI_10X_SERVICE_BURST, | |
183 | ||
184 | /* introduced in 10.2 */ | |
185 | WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, | |
186 | WMI_10X_SERVICE_FORCE_FW_HANG, | |
187 | WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, | |
52c22a63 | 188 | WMI_10X_SERVICE_ATF, |
de0c789b | 189 | WMI_10X_SERVICE_COEX_GPIO, |
cff990ce MK |
190 | }; |
191 | ||
192 | enum wmi_main_service { | |
193 | WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, | |
194 | WMI_MAIN_SERVICE_SCAN_OFFLOAD, | |
195 | WMI_MAIN_SERVICE_ROAM_OFFLOAD, | |
196 | WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, | |
197 | WMI_MAIN_SERVICE_STA_PWRSAVE, | |
198 | WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, | |
199 | WMI_MAIN_SERVICE_AP_UAPSD, | |
200 | WMI_MAIN_SERVICE_AP_DFS, | |
201 | WMI_MAIN_SERVICE_11AC, | |
202 | WMI_MAIN_SERVICE_BLOCKACK, | |
203 | WMI_MAIN_SERVICE_PHYERR, | |
204 | WMI_MAIN_SERVICE_BCN_FILTER, | |
205 | WMI_MAIN_SERVICE_RTT, | |
206 | WMI_MAIN_SERVICE_RATECTRL, | |
207 | WMI_MAIN_SERVICE_WOW, | |
208 | WMI_MAIN_SERVICE_RATECTRL_CACHE, | |
209 | WMI_MAIN_SERVICE_IRAM_TIDS, | |
210 | WMI_MAIN_SERVICE_ARPNS_OFFLOAD, | |
211 | WMI_MAIN_SERVICE_NLO, | |
212 | WMI_MAIN_SERVICE_GTK_OFFLOAD, | |
213 | WMI_MAIN_SERVICE_SCAN_SCH, | |
214 | WMI_MAIN_SERVICE_CSA_OFFLOAD, | |
215 | WMI_MAIN_SERVICE_CHATTER, | |
216 | WMI_MAIN_SERVICE_COEX_FREQAVOID, | |
217 | WMI_MAIN_SERVICE_PACKET_POWER_SAVE, | |
218 | WMI_MAIN_SERVICE_FORCE_FW_HANG, | |
219 | WMI_MAIN_SERVICE_GPIO, | |
220 | WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, | |
221 | WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, | |
222 | WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, | |
223 | WMI_MAIN_SERVICE_STA_KEEP_ALIVE, | |
224 | WMI_MAIN_SERVICE_TX_ENCAP, | |
5e3dd157 KV |
225 | }; |
226 | ||
840357cc RM |
227 | enum wmi_10_4_service { |
228 | WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, | |
229 | WMI_10_4_SERVICE_SCAN_OFFLOAD, | |
230 | WMI_10_4_SERVICE_ROAM_OFFLOAD, | |
231 | WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, | |
232 | WMI_10_4_SERVICE_STA_PWRSAVE, | |
233 | WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, | |
234 | WMI_10_4_SERVICE_AP_UAPSD, | |
235 | WMI_10_4_SERVICE_AP_DFS, | |
236 | WMI_10_4_SERVICE_11AC, | |
237 | WMI_10_4_SERVICE_BLOCKACK, | |
238 | WMI_10_4_SERVICE_PHYERR, | |
239 | WMI_10_4_SERVICE_BCN_FILTER, | |
240 | WMI_10_4_SERVICE_RTT, | |
241 | WMI_10_4_SERVICE_RATECTRL, | |
242 | WMI_10_4_SERVICE_WOW, | |
243 | WMI_10_4_SERVICE_RATECTRL_CACHE, | |
244 | WMI_10_4_SERVICE_IRAM_TIDS, | |
245 | WMI_10_4_SERVICE_BURST, | |
246 | WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, | |
247 | WMI_10_4_SERVICE_GTK_OFFLOAD, | |
248 | WMI_10_4_SERVICE_SCAN_SCH, | |
249 | WMI_10_4_SERVICE_CSA_OFFLOAD, | |
250 | WMI_10_4_SERVICE_CHATTER, | |
251 | WMI_10_4_SERVICE_COEX_FREQAVOID, | |
252 | WMI_10_4_SERVICE_PACKET_POWER_SAVE, | |
253 | WMI_10_4_SERVICE_FORCE_FW_HANG, | |
254 | WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, | |
255 | WMI_10_4_SERVICE_GPIO, | |
256 | WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, | |
257 | WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, | |
258 | WMI_10_4_SERVICE_STA_KEEP_ALIVE, | |
259 | WMI_10_4_SERVICE_TX_ENCAP, | |
260 | WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, | |
261 | WMI_10_4_SERVICE_EARLY_RX, | |
262 | WMI_10_4_SERVICE_ENHANCED_PROXY_STA, | |
263 | WMI_10_4_SERVICE_TT, | |
264 | WMI_10_4_SERVICE_ATF, | |
265 | WMI_10_4_SERVICE_PEER_CACHING, | |
266 | WMI_10_4_SERVICE_COEX_GPIO, | |
267 | WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, | |
268 | WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, | |
269 | WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, | |
270 | }; | |
271 | ||
5e3dd157 KV |
272 | static inline char *wmi_service_name(int service_id) |
273 | { | |
cff990ce MK |
274 | #define SVCSTR(x) case x: return #x |
275 | ||
5e3dd157 | 276 | switch (service_id) { |
cff990ce MK |
277 | SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); |
278 | SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); | |
279 | SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); | |
280 | SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); | |
281 | SVCSTR(WMI_SERVICE_STA_PWRSAVE); | |
282 | SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); | |
283 | SVCSTR(WMI_SERVICE_AP_UAPSD); | |
284 | SVCSTR(WMI_SERVICE_AP_DFS); | |
285 | SVCSTR(WMI_SERVICE_11AC); | |
286 | SVCSTR(WMI_SERVICE_BLOCKACK); | |
287 | SVCSTR(WMI_SERVICE_PHYERR); | |
288 | SVCSTR(WMI_SERVICE_BCN_FILTER); | |
289 | SVCSTR(WMI_SERVICE_RTT); | |
290 | SVCSTR(WMI_SERVICE_RATECTRL); | |
291 | SVCSTR(WMI_SERVICE_WOW); | |
292 | SVCSTR(WMI_SERVICE_RATECTRL_CACHE); | |
293 | SVCSTR(WMI_SERVICE_IRAM_TIDS); | |
294 | SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); | |
295 | SVCSTR(WMI_SERVICE_NLO); | |
296 | SVCSTR(WMI_SERVICE_GTK_OFFLOAD); | |
297 | SVCSTR(WMI_SERVICE_SCAN_SCH); | |
298 | SVCSTR(WMI_SERVICE_CSA_OFFLOAD); | |
299 | SVCSTR(WMI_SERVICE_CHATTER); | |
300 | SVCSTR(WMI_SERVICE_COEX_FREQAVOID); | |
301 | SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); | |
302 | SVCSTR(WMI_SERVICE_FORCE_FW_HANG); | |
303 | SVCSTR(WMI_SERVICE_GPIO); | |
304 | SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); | |
305 | SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); | |
306 | SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); | |
307 | SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); | |
308 | SVCSTR(WMI_SERVICE_TX_ENCAP); | |
309 | SVCSTR(WMI_SERVICE_BURST); | |
310 | SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); | |
311 | SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); | |
ca996ec5 MK |
312 | SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); |
313 | SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); | |
314 | SVCSTR(WMI_SERVICE_EARLY_RX); | |
315 | SVCSTR(WMI_SERVICE_STA_SMPS); | |
316 | SVCSTR(WMI_SERVICE_FWTEST); | |
317 | SVCSTR(WMI_SERVICE_STA_WMMAC); | |
318 | SVCSTR(WMI_SERVICE_TDLS); | |
319 | SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); | |
320 | SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); | |
321 | SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); | |
322 | SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); | |
323 | SVCSTR(WMI_SERVICE_WLAN_HB); | |
324 | SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); | |
325 | SVCSTR(WMI_SERVICE_BATCH_SCAN); | |
326 | SVCSTR(WMI_SERVICE_QPOWER); | |
327 | SVCSTR(WMI_SERVICE_PLMREQ); | |
328 | SVCSTR(WMI_SERVICE_THERMAL_MGMT); | |
329 | SVCSTR(WMI_SERVICE_RMC); | |
330 | SVCSTR(WMI_SERVICE_MHF_OFFLOAD); | |
331 | SVCSTR(WMI_SERVICE_COEX_SAR); | |
332 | SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); | |
333 | SVCSTR(WMI_SERVICE_NAN); | |
334 | SVCSTR(WMI_SERVICE_L1SS_STAT); | |
335 | SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); | |
336 | SVCSTR(WMI_SERVICE_OBSS_SCAN); | |
337 | SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); | |
338 | SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); | |
339 | SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); | |
340 | SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); | |
341 | SVCSTR(WMI_SERVICE_LPASS); | |
342 | SVCSTR(WMI_SERVICE_EXTSCAN); | |
343 | SVCSTR(WMI_SERVICE_D0WOW); | |
344 | SVCSTR(WMI_SERVICE_HSOFFLOAD); | |
345 | SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); | |
346 | SVCSTR(WMI_SERVICE_RX_FULL_REORDER); | |
347 | SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); | |
348 | SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); | |
349 | SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); | |
350 | SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); | |
52c22a63 | 351 | SVCSTR(WMI_SERVICE_ATF); |
de0c789b | 352 | SVCSTR(WMI_SERVICE_COEX_GPIO); |
840357cc RM |
353 | SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); |
354 | SVCSTR(WMI_SERVICE_TT); | |
355 | SVCSTR(WMI_SERVICE_PEER_CACHING); | |
356 | SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); | |
357 | SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); | |
358 | SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); | |
5e3dd157 | 359 | default: |
cff990ce | 360 | return NULL; |
5e3dd157 | 361 | } |
cff990ce MK |
362 | |
363 | #undef SVCSTR | |
364 | } | |
365 | ||
37b9f933 MK |
366 | #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ |
367 | ((svc_id) < (len) && \ | |
368 | __le32_to_cpu((wmi_svc_bmap)[(svc_id)/(sizeof(u32))]) & \ | |
cff990ce MK |
369 | BIT((svc_id)%(sizeof(u32)))) |
370 | ||
37b9f933 | 371 | #define SVCMAP(x, y, len) \ |
cff990ce | 372 | do { \ |
37b9f933 | 373 | if (WMI_SERVICE_IS_ENABLED((in), (x), (len))) \ |
cff990ce MK |
374 | __set_bit(y, out); \ |
375 | } while (0) | |
376 | ||
37b9f933 MK |
377 | static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, |
378 | size_t len) | |
cff990ce MK |
379 | { |
380 | SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, | |
37b9f933 | 381 | WMI_SERVICE_BEACON_OFFLOAD, len); |
cff990ce | 382 | SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, |
37b9f933 | 383 | WMI_SERVICE_SCAN_OFFLOAD, len); |
cff990ce | 384 | SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, |
37b9f933 | 385 | WMI_SERVICE_ROAM_OFFLOAD, len); |
cff990ce | 386 | SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, |
37b9f933 | 387 | WMI_SERVICE_BCN_MISS_OFFLOAD, len); |
cff990ce | 388 | SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, |
37b9f933 | 389 | WMI_SERVICE_STA_PWRSAVE, len); |
cff990ce | 390 | SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, |
37b9f933 | 391 | WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); |
cff990ce | 392 | SVCMAP(WMI_10X_SERVICE_AP_UAPSD, |
37b9f933 | 393 | WMI_SERVICE_AP_UAPSD, len); |
cff990ce | 394 | SVCMAP(WMI_10X_SERVICE_AP_DFS, |
37b9f933 | 395 | WMI_SERVICE_AP_DFS, len); |
cff990ce | 396 | SVCMAP(WMI_10X_SERVICE_11AC, |
37b9f933 | 397 | WMI_SERVICE_11AC, len); |
cff990ce | 398 | SVCMAP(WMI_10X_SERVICE_BLOCKACK, |
37b9f933 | 399 | WMI_SERVICE_BLOCKACK, len); |
cff990ce | 400 | SVCMAP(WMI_10X_SERVICE_PHYERR, |
37b9f933 | 401 | WMI_SERVICE_PHYERR, len); |
cff990ce | 402 | SVCMAP(WMI_10X_SERVICE_BCN_FILTER, |
37b9f933 | 403 | WMI_SERVICE_BCN_FILTER, len); |
cff990ce | 404 | SVCMAP(WMI_10X_SERVICE_RTT, |
37b9f933 | 405 | WMI_SERVICE_RTT, len); |
cff990ce | 406 | SVCMAP(WMI_10X_SERVICE_RATECTRL, |
37b9f933 | 407 | WMI_SERVICE_RATECTRL, len); |
cff990ce | 408 | SVCMAP(WMI_10X_SERVICE_WOW, |
37b9f933 | 409 | WMI_SERVICE_WOW, len); |
cff990ce | 410 | SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, |
37b9f933 | 411 | WMI_SERVICE_RATECTRL_CACHE, len); |
cff990ce | 412 | SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, |
37b9f933 | 413 | WMI_SERVICE_IRAM_TIDS, len); |
cff990ce | 414 | SVCMAP(WMI_10X_SERVICE_BURST, |
37b9f933 | 415 | WMI_SERVICE_BURST, len); |
cff990ce | 416 | SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, |
37b9f933 | 417 | WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); |
cff990ce | 418 | SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, |
37b9f933 | 419 | WMI_SERVICE_FORCE_FW_HANG, len); |
cff990ce | 420 | SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, |
37b9f933 | 421 | WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); |
52c22a63 YL |
422 | SVCMAP(WMI_10X_SERVICE_ATF, |
423 | WMI_SERVICE_ATF, len); | |
de0c789b YL |
424 | SVCMAP(WMI_10X_SERVICE_COEX_GPIO, |
425 | WMI_SERVICE_COEX_GPIO, len); | |
5e3dd157 KV |
426 | } |
427 | ||
37b9f933 MK |
428 | static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, |
429 | size_t len) | |
cff990ce MK |
430 | { |
431 | SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, | |
37b9f933 | 432 | WMI_SERVICE_BEACON_OFFLOAD, len); |
cff990ce | 433 | SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, |
37b9f933 | 434 | WMI_SERVICE_SCAN_OFFLOAD, len); |
cff990ce | 435 | SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, |
37b9f933 | 436 | WMI_SERVICE_ROAM_OFFLOAD, len); |
cff990ce | 437 | SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, |
37b9f933 | 438 | WMI_SERVICE_BCN_MISS_OFFLOAD, len); |
cff990ce | 439 | SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, |
37b9f933 | 440 | WMI_SERVICE_STA_PWRSAVE, len); |
cff990ce | 441 | SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, |
37b9f933 | 442 | WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); |
cff990ce | 443 | SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, |
37b9f933 | 444 | WMI_SERVICE_AP_UAPSD, len); |
cff990ce | 445 | SVCMAP(WMI_MAIN_SERVICE_AP_DFS, |
37b9f933 | 446 | WMI_SERVICE_AP_DFS, len); |
cff990ce | 447 | SVCMAP(WMI_MAIN_SERVICE_11AC, |
37b9f933 | 448 | WMI_SERVICE_11AC, len); |
cff990ce | 449 | SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, |
37b9f933 | 450 | WMI_SERVICE_BLOCKACK, len); |
cff990ce | 451 | SVCMAP(WMI_MAIN_SERVICE_PHYERR, |
37b9f933 | 452 | WMI_SERVICE_PHYERR, len); |
cff990ce | 453 | SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, |
37b9f933 | 454 | WMI_SERVICE_BCN_FILTER, len); |
cff990ce | 455 | SVCMAP(WMI_MAIN_SERVICE_RTT, |
37b9f933 | 456 | WMI_SERVICE_RTT, len); |
cff990ce | 457 | SVCMAP(WMI_MAIN_SERVICE_RATECTRL, |
37b9f933 | 458 | WMI_SERVICE_RATECTRL, len); |
cff990ce | 459 | SVCMAP(WMI_MAIN_SERVICE_WOW, |
37b9f933 | 460 | WMI_SERVICE_WOW, len); |
cff990ce | 461 | SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, |
37b9f933 | 462 | WMI_SERVICE_RATECTRL_CACHE, len); |
cff990ce | 463 | SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, |
37b9f933 | 464 | WMI_SERVICE_IRAM_TIDS, len); |
cff990ce | 465 | SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, |
37b9f933 | 466 | WMI_SERVICE_ARPNS_OFFLOAD, len); |
cff990ce | 467 | SVCMAP(WMI_MAIN_SERVICE_NLO, |
37b9f933 | 468 | WMI_SERVICE_NLO, len); |
cff990ce | 469 | SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, |
37b9f933 | 470 | WMI_SERVICE_GTK_OFFLOAD, len); |
cff990ce | 471 | SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, |
37b9f933 | 472 | WMI_SERVICE_SCAN_SCH, len); |
cff990ce | 473 | SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, |
37b9f933 | 474 | WMI_SERVICE_CSA_OFFLOAD, len); |
cff990ce | 475 | SVCMAP(WMI_MAIN_SERVICE_CHATTER, |
37b9f933 | 476 | WMI_SERVICE_CHATTER, len); |
cff990ce | 477 | SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, |
37b9f933 | 478 | WMI_SERVICE_COEX_FREQAVOID, len); |
cff990ce | 479 | SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, |
37b9f933 | 480 | WMI_SERVICE_PACKET_POWER_SAVE, len); |
cff990ce | 481 | SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, |
37b9f933 | 482 | WMI_SERVICE_FORCE_FW_HANG, len); |
cff990ce | 483 | SVCMAP(WMI_MAIN_SERVICE_GPIO, |
37b9f933 | 484 | WMI_SERVICE_GPIO, len); |
cff990ce | 485 | SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, |
37b9f933 | 486 | WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); |
cff990ce | 487 | SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, |
37b9f933 | 488 | WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); |
cff990ce | 489 | SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, |
37b9f933 | 490 | WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); |
cff990ce | 491 | SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, |
37b9f933 | 492 | WMI_SERVICE_STA_KEEP_ALIVE, len); |
cff990ce | 493 | SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, |
37b9f933 | 494 | WMI_SERVICE_TX_ENCAP, len); |
cff990ce MK |
495 | } |
496 | ||
840357cc RM |
497 | static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, |
498 | size_t len) | |
499 | { | |
500 | SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, | |
501 | WMI_SERVICE_BEACON_OFFLOAD, len); | |
502 | SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, | |
503 | WMI_SERVICE_SCAN_OFFLOAD, len); | |
504 | SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, | |
505 | WMI_SERVICE_ROAM_OFFLOAD, len); | |
506 | SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, | |
507 | WMI_SERVICE_BCN_MISS_OFFLOAD, len); | |
508 | SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, | |
509 | WMI_SERVICE_STA_PWRSAVE, len); | |
510 | SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, | |
511 | WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); | |
512 | SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, | |
513 | WMI_SERVICE_AP_UAPSD, len); | |
514 | SVCMAP(WMI_10_4_SERVICE_AP_DFS, | |
515 | WMI_SERVICE_AP_DFS, len); | |
516 | SVCMAP(WMI_10_4_SERVICE_11AC, | |
517 | WMI_SERVICE_11AC, len); | |
518 | SVCMAP(WMI_10_4_SERVICE_BLOCKACK, | |
519 | WMI_SERVICE_BLOCKACK, len); | |
520 | SVCMAP(WMI_10_4_SERVICE_PHYERR, | |
521 | WMI_SERVICE_PHYERR, len); | |
522 | SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, | |
523 | WMI_SERVICE_BCN_FILTER, len); | |
524 | SVCMAP(WMI_10_4_SERVICE_RTT, | |
525 | WMI_SERVICE_RTT, len); | |
526 | SVCMAP(WMI_10_4_SERVICE_RATECTRL, | |
527 | WMI_SERVICE_RATECTRL, len); | |
528 | SVCMAP(WMI_10_4_SERVICE_WOW, | |
529 | WMI_SERVICE_WOW, len); | |
530 | SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, | |
531 | WMI_SERVICE_RATECTRL_CACHE, len); | |
532 | SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, | |
533 | WMI_SERVICE_IRAM_TIDS, len); | |
534 | SVCMAP(WMI_10_4_SERVICE_BURST, | |
535 | WMI_SERVICE_BURST, len); | |
536 | SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, | |
537 | WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); | |
538 | SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, | |
539 | WMI_SERVICE_GTK_OFFLOAD, len); | |
540 | SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, | |
541 | WMI_SERVICE_SCAN_SCH, len); | |
542 | SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, | |
543 | WMI_SERVICE_CSA_OFFLOAD, len); | |
544 | SVCMAP(WMI_10_4_SERVICE_CHATTER, | |
545 | WMI_SERVICE_CHATTER, len); | |
546 | SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, | |
547 | WMI_SERVICE_COEX_FREQAVOID, len); | |
548 | SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, | |
549 | WMI_SERVICE_PACKET_POWER_SAVE, len); | |
550 | SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, | |
551 | WMI_SERVICE_FORCE_FW_HANG, len); | |
552 | SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, | |
553 | WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); | |
554 | SVCMAP(WMI_10_4_SERVICE_GPIO, | |
555 | WMI_SERVICE_GPIO, len); | |
556 | SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, | |
557 | WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); | |
558 | SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, | |
559 | WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); | |
560 | SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, | |
561 | WMI_SERVICE_STA_KEEP_ALIVE, len); | |
562 | SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, | |
563 | WMI_SERVICE_TX_ENCAP, len); | |
564 | SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, | |
565 | WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); | |
566 | SVCMAP(WMI_10_4_SERVICE_EARLY_RX, | |
567 | WMI_SERVICE_EARLY_RX, len); | |
568 | SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, | |
569 | WMI_SERVICE_ENHANCED_PROXY_STA, len); | |
570 | SVCMAP(WMI_10_4_SERVICE_TT, | |
571 | WMI_SERVICE_TT, len); | |
572 | SVCMAP(WMI_10_4_SERVICE_ATF, | |
573 | WMI_SERVICE_ATF, len); | |
574 | SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, | |
575 | WMI_SERVICE_PEER_CACHING, len); | |
576 | SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, | |
577 | WMI_SERVICE_COEX_GPIO, len); | |
578 | SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, | |
579 | WMI_SERVICE_AUX_SPECTRAL_INTF, len); | |
580 | SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, | |
581 | WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); | |
582 | SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, | |
583 | WMI_SERVICE_BSS_CHANNEL_INFO_64, len); | |
584 | } | |
585 | ||
cff990ce | 586 | #undef SVCMAP |
5e3dd157 | 587 | |
5e3dd157 KV |
588 | /* 2 word representation of MAC addr */ |
589 | struct wmi_mac_addr { | |
590 | union { | |
591 | u8 addr[6]; | |
592 | struct { | |
593 | u32 word0; | |
594 | u32 word1; | |
595 | } __packed; | |
596 | } __packed; | |
597 | } __packed; | |
598 | ||
ce42870e BM |
599 | struct wmi_cmd_map { |
600 | u32 init_cmdid; | |
601 | u32 start_scan_cmdid; | |
602 | u32 stop_scan_cmdid; | |
603 | u32 scan_chan_list_cmdid; | |
604 | u32 scan_sch_prio_tbl_cmdid; | |
605 | u32 pdev_set_regdomain_cmdid; | |
606 | u32 pdev_set_channel_cmdid; | |
607 | u32 pdev_set_param_cmdid; | |
608 | u32 pdev_pktlog_enable_cmdid; | |
609 | u32 pdev_pktlog_disable_cmdid; | |
610 | u32 pdev_set_wmm_params_cmdid; | |
611 | u32 pdev_set_ht_cap_ie_cmdid; | |
612 | u32 pdev_set_vht_cap_ie_cmdid; | |
613 | u32 pdev_set_dscp_tid_map_cmdid; | |
614 | u32 pdev_set_quiet_mode_cmdid; | |
615 | u32 pdev_green_ap_ps_enable_cmdid; | |
616 | u32 pdev_get_tpc_config_cmdid; | |
617 | u32 pdev_set_base_macaddr_cmdid; | |
618 | u32 vdev_create_cmdid; | |
619 | u32 vdev_delete_cmdid; | |
620 | u32 vdev_start_request_cmdid; | |
621 | u32 vdev_restart_request_cmdid; | |
622 | u32 vdev_up_cmdid; | |
623 | u32 vdev_stop_cmdid; | |
624 | u32 vdev_down_cmdid; | |
625 | u32 vdev_set_param_cmdid; | |
626 | u32 vdev_install_key_cmdid; | |
627 | u32 peer_create_cmdid; | |
628 | u32 peer_delete_cmdid; | |
629 | u32 peer_flush_tids_cmdid; | |
630 | u32 peer_set_param_cmdid; | |
631 | u32 peer_assoc_cmdid; | |
632 | u32 peer_add_wds_entry_cmdid; | |
633 | u32 peer_remove_wds_entry_cmdid; | |
634 | u32 peer_mcast_group_cmdid; | |
635 | u32 bcn_tx_cmdid; | |
636 | u32 pdev_send_bcn_cmdid; | |
637 | u32 bcn_tmpl_cmdid; | |
638 | u32 bcn_filter_rx_cmdid; | |
639 | u32 prb_req_filter_rx_cmdid; | |
640 | u32 mgmt_tx_cmdid; | |
641 | u32 prb_tmpl_cmdid; | |
642 | u32 addba_clear_resp_cmdid; | |
643 | u32 addba_send_cmdid; | |
644 | u32 addba_status_cmdid; | |
645 | u32 delba_send_cmdid; | |
646 | u32 addba_set_resp_cmdid; | |
647 | u32 send_singleamsdu_cmdid; | |
648 | u32 sta_powersave_mode_cmdid; | |
649 | u32 sta_powersave_param_cmdid; | |
650 | u32 sta_mimo_ps_mode_cmdid; | |
651 | u32 pdev_dfs_enable_cmdid; | |
652 | u32 pdev_dfs_disable_cmdid; | |
653 | u32 roam_scan_mode; | |
654 | u32 roam_scan_rssi_threshold; | |
655 | u32 roam_scan_period; | |
656 | u32 roam_scan_rssi_change_threshold; | |
657 | u32 roam_ap_profile; | |
658 | u32 ofl_scan_add_ap_profile; | |
659 | u32 ofl_scan_remove_ap_profile; | |
660 | u32 ofl_scan_period; | |
661 | u32 p2p_dev_set_device_info; | |
662 | u32 p2p_dev_set_discoverability; | |
663 | u32 p2p_go_set_beacon_ie; | |
664 | u32 p2p_go_set_probe_resp_ie; | |
665 | u32 p2p_set_vendor_ie_data_cmdid; | |
666 | u32 ap_ps_peer_param_cmdid; | |
667 | u32 ap_ps_peer_uapsd_coex_cmdid; | |
668 | u32 peer_rate_retry_sched_cmdid; | |
669 | u32 wlan_profile_trigger_cmdid; | |
670 | u32 wlan_profile_set_hist_intvl_cmdid; | |
671 | u32 wlan_profile_get_profile_data_cmdid; | |
672 | u32 wlan_profile_enable_profile_id_cmdid; | |
673 | u32 wlan_profile_list_profile_id_cmdid; | |
674 | u32 pdev_suspend_cmdid; | |
675 | u32 pdev_resume_cmdid; | |
676 | u32 add_bcn_filter_cmdid; | |
677 | u32 rmv_bcn_filter_cmdid; | |
678 | u32 wow_add_wake_pattern_cmdid; | |
679 | u32 wow_del_wake_pattern_cmdid; | |
680 | u32 wow_enable_disable_wake_event_cmdid; | |
681 | u32 wow_enable_cmdid; | |
682 | u32 wow_hostwakeup_from_sleep_cmdid; | |
683 | u32 rtt_measreq_cmdid; | |
684 | u32 rtt_tsf_cmdid; | |
685 | u32 vdev_spectral_scan_configure_cmdid; | |
686 | u32 vdev_spectral_scan_enable_cmdid; | |
687 | u32 request_stats_cmdid; | |
688 | u32 set_arp_ns_offload_cmdid; | |
689 | u32 network_list_offload_config_cmdid; | |
690 | u32 gtk_offload_cmdid; | |
691 | u32 csa_offload_enable_cmdid; | |
692 | u32 csa_offload_chanswitch_cmdid; | |
693 | u32 chatter_set_mode_cmdid; | |
694 | u32 peer_tid_addba_cmdid; | |
695 | u32 peer_tid_delba_cmdid; | |
696 | u32 sta_dtim_ps_method_cmdid; | |
697 | u32 sta_uapsd_auto_trig_cmdid; | |
698 | u32 sta_keepalive_cmd; | |
699 | u32 echo_cmdid; | |
700 | u32 pdev_utf_cmdid; | |
701 | u32 dbglog_cfg_cmdid; | |
702 | u32 pdev_qvit_cmdid; | |
703 | u32 pdev_ftm_intg_cmdid; | |
704 | u32 vdev_set_keepalive_cmdid; | |
705 | u32 vdev_get_keepalive_cmdid; | |
706 | u32 force_fw_hang_cmdid; | |
707 | u32 gpio_config_cmdid; | |
708 | u32 gpio_output_cmdid; | |
a57a6a27 | 709 | u32 pdev_get_temperature_cmdid; |
6d492fe2 | 710 | u32 vdev_set_wmm_params_cmdid; |
ad45c888 MP |
711 | u32 tdls_set_state_cmdid; |
712 | u32 tdls_peer_update_cmdid; | |
5b272e30 | 713 | u32 adaptive_qcs_cmdid; |
2d491e69 RM |
714 | u32 scan_update_request_cmdid; |
715 | u32 vdev_standby_response_cmdid; | |
716 | u32 vdev_resume_response_cmdid; | |
717 | u32 wlan_peer_caching_add_peer_cmdid; | |
718 | u32 wlan_peer_caching_evict_peer_cmdid; | |
719 | u32 wlan_peer_caching_restore_peer_cmdid; | |
720 | u32 wlan_peer_caching_print_all_peers_info_cmdid; | |
721 | u32 peer_update_wds_entry_cmdid; | |
722 | u32 peer_add_proxy_sta_entry_cmdid; | |
723 | u32 rtt_keepalive_cmdid; | |
724 | u32 oem_req_cmdid; | |
725 | u32 nan_cmdid; | |
726 | u32 vdev_ratemask_cmdid; | |
727 | u32 qboost_cfg_cmdid; | |
728 | u32 pdev_smart_ant_enable_cmdid; | |
729 | u32 pdev_smart_ant_set_rx_antenna_cmdid; | |
730 | u32 peer_smart_ant_set_tx_antenna_cmdid; | |
731 | u32 peer_smart_ant_set_train_info_cmdid; | |
732 | u32 peer_smart_ant_set_node_config_ops_cmdid; | |
733 | u32 pdev_set_antenna_switch_table_cmdid; | |
734 | u32 pdev_set_ctl_table_cmdid; | |
735 | u32 pdev_set_mimogain_table_cmdid; | |
736 | u32 pdev_ratepwr_table_cmdid; | |
737 | u32 pdev_ratepwr_chainmsk_table_cmdid; | |
738 | u32 pdev_fips_cmdid; | |
739 | u32 tt_set_conf_cmdid; | |
740 | u32 fwtest_cmdid; | |
741 | u32 vdev_atf_request_cmdid; | |
742 | u32 peer_atf_request_cmdid; | |
743 | u32 pdev_get_ani_cck_config_cmdid; | |
744 | u32 pdev_get_ani_ofdm_config_cmdid; | |
745 | u32 pdev_reserve_ast_entry_cmdid; | |
746 | u32 pdev_get_nfcal_power_cmdid; | |
747 | u32 pdev_get_tpc_cmdid; | |
748 | u32 pdev_get_ast_info_cmdid; | |
749 | u32 vdev_set_dscp_tid_map_cmdid; | |
750 | u32 pdev_get_info_cmdid; | |
751 | u32 vdev_get_info_cmdid; | |
752 | u32 vdev_filter_neighbor_rx_packets_cmdid; | |
753 | u32 mu_cal_start_cmdid; | |
754 | u32 set_cca_params_cmdid; | |
755 | u32 pdev_bss_chan_info_request_cmdid; | |
ce42870e BM |
756 | }; |
757 | ||
5e3dd157 KV |
758 | /* |
759 | * wmi command groups. | |
760 | */ | |
761 | enum wmi_cmd_group { | |
762 | /* 0 to 2 are reserved */ | |
763 | WMI_GRP_START = 0x3, | |
764 | WMI_GRP_SCAN = WMI_GRP_START, | |
765 | WMI_GRP_PDEV, | |
766 | WMI_GRP_VDEV, | |
767 | WMI_GRP_PEER, | |
768 | WMI_GRP_MGMT, | |
769 | WMI_GRP_BA_NEG, | |
770 | WMI_GRP_STA_PS, | |
771 | WMI_GRP_DFS, | |
772 | WMI_GRP_ROAM, | |
773 | WMI_GRP_OFL_SCAN, | |
774 | WMI_GRP_P2P, | |
775 | WMI_GRP_AP_PS, | |
776 | WMI_GRP_RATE_CTRL, | |
777 | WMI_GRP_PROFILE, | |
778 | WMI_GRP_SUSPEND, | |
779 | WMI_GRP_BCN_FILTER, | |
780 | WMI_GRP_WOW, | |
781 | WMI_GRP_RTT, | |
782 | WMI_GRP_SPECTRAL, | |
783 | WMI_GRP_STATS, | |
784 | WMI_GRP_ARP_NS_OFL, | |
785 | WMI_GRP_NLO_OFL, | |
786 | WMI_GRP_GTK_OFL, | |
787 | WMI_GRP_CSA_OFL, | |
788 | WMI_GRP_CHATTER, | |
789 | WMI_GRP_TID_ADDBA, | |
790 | WMI_GRP_MISC, | |
791 | WMI_GRP_GPIO, | |
792 | }; | |
793 | ||
794 | #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) | |
795 | #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) | |
796 | ||
34957b25 | 797 | #define WMI_CMD_UNSUPPORTED 0 |
b7e3adf9 BM |
798 | |
799 | /* Command IDs and command events for MAIN FW. */ | |
5e3dd157 KV |
800 | enum wmi_cmd_id { |
801 | WMI_INIT_CMDID = 0x1, | |
802 | ||
803 | /* Scan specific commands */ | |
804 | WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), | |
805 | WMI_STOP_SCAN_CMDID, | |
806 | WMI_SCAN_CHAN_LIST_CMDID, | |
807 | WMI_SCAN_SCH_PRIO_TBL_CMDID, | |
808 | ||
809 | /* PDEV (physical device) specific commands */ | |
810 | WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), | |
811 | WMI_PDEV_SET_CHANNEL_CMDID, | |
812 | WMI_PDEV_SET_PARAM_CMDID, | |
813 | WMI_PDEV_PKTLOG_ENABLE_CMDID, | |
814 | WMI_PDEV_PKTLOG_DISABLE_CMDID, | |
815 | WMI_PDEV_SET_WMM_PARAMS_CMDID, | |
816 | WMI_PDEV_SET_HT_CAP_IE_CMDID, | |
817 | WMI_PDEV_SET_VHT_CAP_IE_CMDID, | |
818 | WMI_PDEV_SET_DSCP_TID_MAP_CMDID, | |
819 | WMI_PDEV_SET_QUIET_MODE_CMDID, | |
820 | WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, | |
821 | WMI_PDEV_GET_TPC_CONFIG_CMDID, | |
822 | WMI_PDEV_SET_BASE_MACADDR_CMDID, | |
823 | ||
824 | /* VDEV (virtual device) specific commands */ | |
825 | WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), | |
826 | WMI_VDEV_DELETE_CMDID, | |
827 | WMI_VDEV_START_REQUEST_CMDID, | |
828 | WMI_VDEV_RESTART_REQUEST_CMDID, | |
829 | WMI_VDEV_UP_CMDID, | |
830 | WMI_VDEV_STOP_CMDID, | |
831 | WMI_VDEV_DOWN_CMDID, | |
832 | WMI_VDEV_SET_PARAM_CMDID, | |
833 | WMI_VDEV_INSTALL_KEY_CMDID, | |
834 | ||
835 | /* peer specific commands */ | |
836 | WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), | |
837 | WMI_PEER_DELETE_CMDID, | |
838 | WMI_PEER_FLUSH_TIDS_CMDID, | |
839 | WMI_PEER_SET_PARAM_CMDID, | |
840 | WMI_PEER_ASSOC_CMDID, | |
841 | WMI_PEER_ADD_WDS_ENTRY_CMDID, | |
842 | WMI_PEER_REMOVE_WDS_ENTRY_CMDID, | |
843 | WMI_PEER_MCAST_GROUP_CMDID, | |
844 | ||
845 | /* beacon/management specific commands */ | |
846 | WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), | |
847 | WMI_PDEV_SEND_BCN_CMDID, | |
848 | WMI_BCN_TMPL_CMDID, | |
849 | WMI_BCN_FILTER_RX_CMDID, | |
850 | WMI_PRB_REQ_FILTER_RX_CMDID, | |
851 | WMI_MGMT_TX_CMDID, | |
852 | WMI_PRB_TMPL_CMDID, | |
853 | ||
854 | /* commands to directly control BA negotiation directly from host. */ | |
855 | WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), | |
856 | WMI_ADDBA_SEND_CMDID, | |
857 | WMI_ADDBA_STATUS_CMDID, | |
858 | WMI_DELBA_SEND_CMDID, | |
859 | WMI_ADDBA_SET_RESP_CMDID, | |
860 | WMI_SEND_SINGLEAMSDU_CMDID, | |
861 | ||
862 | /* Station power save specific config */ | |
863 | WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), | |
864 | WMI_STA_POWERSAVE_PARAM_CMDID, | |
865 | WMI_STA_MIMO_PS_MODE_CMDID, | |
866 | ||
867 | /** DFS-specific commands */ | |
868 | WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), | |
869 | WMI_PDEV_DFS_DISABLE_CMDID, | |
870 | ||
871 | /* Roaming specific commands */ | |
872 | WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), | |
873 | WMI_ROAM_SCAN_RSSI_THRESHOLD, | |
874 | WMI_ROAM_SCAN_PERIOD, | |
875 | WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, | |
876 | WMI_ROAM_AP_PROFILE, | |
877 | ||
878 | /* offload scan specific commands */ | |
879 | WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), | |
880 | WMI_OFL_SCAN_REMOVE_AP_PROFILE, | |
881 | WMI_OFL_SCAN_PERIOD, | |
882 | ||
883 | /* P2P specific commands */ | |
884 | WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), | |
885 | WMI_P2P_DEV_SET_DISCOVERABILITY, | |
886 | WMI_P2P_GO_SET_BEACON_IE, | |
887 | WMI_P2P_GO_SET_PROBE_RESP_IE, | |
888 | WMI_P2P_SET_VENDOR_IE_DATA_CMDID, | |
889 | ||
890 | /* AP power save specific config */ | |
891 | WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), | |
892 | WMI_AP_PS_PEER_UAPSD_COEX_CMDID, | |
893 | ||
894 | /* Rate-control specific commands */ | |
895 | WMI_PEER_RATE_RETRY_SCHED_CMDID = | |
896 | WMI_CMD_GRP(WMI_GRP_RATE_CTRL), | |
897 | ||
898 | /* WLAN Profiling commands. */ | |
899 | WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), | |
900 | WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, | |
901 | WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, | |
902 | WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, | |
903 | WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, | |
904 | ||
905 | /* Suspend resume command Ids */ | |
906 | WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), | |
907 | WMI_PDEV_RESUME_CMDID, | |
908 | ||
909 | /* Beacon filter commands */ | |
910 | WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), | |
911 | WMI_RMV_BCN_FILTER_CMDID, | |
912 | ||
913 | /* WOW Specific WMI commands*/ | |
914 | WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), | |
915 | WMI_WOW_DEL_WAKE_PATTERN_CMDID, | |
916 | WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, | |
917 | WMI_WOW_ENABLE_CMDID, | |
918 | WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, | |
919 | ||
920 | /* RTT measurement related cmd */ | |
921 | WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), | |
922 | WMI_RTT_TSF_CMDID, | |
923 | ||
924 | /* spectral scan commands */ | |
925 | WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), | |
926 | WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, | |
927 | ||
928 | /* F/W stats */ | |
929 | WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), | |
930 | ||
931 | /* ARP OFFLOAD REQUEST*/ | |
932 | WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), | |
933 | ||
934 | /* NS offload confid*/ | |
935 | WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), | |
936 | ||
937 | /* GTK offload Specific WMI commands*/ | |
938 | WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), | |
939 | ||
940 | /* CSA offload Specific WMI commands*/ | |
941 | WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), | |
942 | WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, | |
943 | ||
944 | /* Chatter commands*/ | |
945 | WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), | |
946 | ||
947 | /* addba specific commands */ | |
948 | WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), | |
949 | WMI_PEER_TID_DELBA_CMDID, | |
950 | ||
951 | /* set station mimo powersave method */ | |
952 | WMI_STA_DTIM_PS_METHOD_CMDID, | |
953 | /* Configure the Station UAPSD AC Auto Trigger Parameters */ | |
954 | WMI_STA_UAPSD_AUTO_TRIG_CMDID, | |
955 | ||
956 | /* STA Keep alive parameter configuration, | |
957 | Requires WMI_SERVICE_STA_KEEP_ALIVE */ | |
958 | WMI_STA_KEEPALIVE_CMD, | |
959 | ||
960 | /* misc command group */ | |
961 | WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), | |
962 | WMI_PDEV_UTF_CMDID, | |
963 | WMI_DBGLOG_CFG_CMDID, | |
964 | WMI_PDEV_QVIT_CMDID, | |
965 | WMI_PDEV_FTM_INTG_CMDID, | |
966 | WMI_VDEV_SET_KEEPALIVE_CMDID, | |
967 | WMI_VDEV_GET_KEEPALIVE_CMDID, | |
9cfbce75 | 968 | WMI_FORCE_FW_HANG_CMDID, |
5e3dd157 KV |
969 | |
970 | /* GPIO Configuration */ | |
971 | WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), | |
972 | WMI_GPIO_OUTPUT_CMDID, | |
973 | }; | |
974 | ||
975 | enum wmi_event_id { | |
976 | WMI_SERVICE_READY_EVENTID = 0x1, | |
977 | WMI_READY_EVENTID, | |
978 | ||
979 | /* Scan specific events */ | |
980 | WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), | |
981 | ||
982 | /* PDEV specific events */ | |
983 | WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), | |
984 | WMI_CHAN_INFO_EVENTID, | |
985 | WMI_PHYERR_EVENTID, | |
986 | ||
987 | /* VDEV specific events */ | |
988 | WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), | |
989 | WMI_VDEV_STOPPED_EVENTID, | |
990 | WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, | |
991 | ||
992 | /* peer specific events */ | |
993 | WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), | |
994 | ||
995 | /* beacon/mgmt specific events */ | |
996 | WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), | |
997 | WMI_HOST_SWBA_EVENTID, | |
998 | WMI_TBTTOFFSET_UPDATE_EVENTID, | |
999 | ||
1000 | /* ADDBA Related WMI Events*/ | |
1001 | WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), | |
1002 | WMI_TX_ADDBA_COMPLETE_EVENTID, | |
1003 | ||
1004 | /* Roam event to trigger roaming on host */ | |
1005 | WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), | |
1006 | WMI_PROFILE_MATCH, | |
1007 | ||
1008 | /* WoW */ | |
1009 | WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), | |
1010 | ||
1011 | /* RTT */ | |
1012 | WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), | |
1013 | WMI_TSF_MEASUREMENT_REPORT_EVENTID, | |
1014 | WMI_RTT_ERROR_REPORT_EVENTID, | |
1015 | ||
1016 | /* GTK offload */ | |
1017 | WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), | |
1018 | WMI_GTK_REKEY_FAIL_EVENTID, | |
1019 | ||
1020 | /* CSA IE received event */ | |
1021 | WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), | |
1022 | ||
1023 | /* Misc events */ | |
1024 | WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), | |
1025 | WMI_PDEV_UTF_EVENTID, | |
1026 | WMI_DEBUG_MESG_EVENTID, | |
1027 | WMI_UPDATE_STATS_EVENTID, | |
1028 | WMI_DEBUG_PRINT_EVENTID, | |
1029 | WMI_DCS_INTERFERENCE_EVENTID, | |
1030 | WMI_PDEV_QVIT_EVENTID, | |
1031 | WMI_WLAN_PROFILE_DATA_EVENTID, | |
1032 | WMI_PDEV_FTM_INTG_EVENTID, | |
1033 | WMI_WLAN_FREQ_AVOID_EVENTID, | |
1034 | WMI_VDEV_GET_KEEPALIVE_EVENTID, | |
1035 | ||
1036 | /* GPIO Event */ | |
1037 | WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), | |
1038 | }; | |
1039 | ||
b7e3adf9 BM |
1040 | /* Command IDs and command events for 10.X firmware */ |
1041 | enum wmi_10x_cmd_id { | |
1042 | WMI_10X_START_CMDID = 0x9000, | |
1043 | WMI_10X_END_CMDID = 0x9FFF, | |
1044 | ||
1045 | /* initialize the wlan sub system */ | |
1046 | WMI_10X_INIT_CMDID, | |
1047 | ||
1048 | /* Scan specific commands */ | |
1049 | ||
1050 | WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, | |
1051 | WMI_10X_STOP_SCAN_CMDID, | |
1052 | WMI_10X_SCAN_CHAN_LIST_CMDID, | |
1053 | WMI_10X_ECHO_CMDID, | |
1054 | ||
1055 | /* PDEV(physical device) specific commands */ | |
1056 | WMI_10X_PDEV_SET_REGDOMAIN_CMDID, | |
1057 | WMI_10X_PDEV_SET_CHANNEL_CMDID, | |
1058 | WMI_10X_PDEV_SET_PARAM_CMDID, | |
1059 | WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, | |
1060 | WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, | |
1061 | WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, | |
1062 | WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, | |
1063 | WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, | |
1064 | WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, | |
1065 | WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, | |
1066 | WMI_10X_PDEV_SET_QUIET_MODE_CMDID, | |
1067 | WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, | |
1068 | WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, | |
1069 | ||
1070 | /* VDEV(virtual device) specific commands */ | |
1071 | WMI_10X_VDEV_CREATE_CMDID, | |
1072 | WMI_10X_VDEV_DELETE_CMDID, | |
1073 | WMI_10X_VDEV_START_REQUEST_CMDID, | |
1074 | WMI_10X_VDEV_RESTART_REQUEST_CMDID, | |
1075 | WMI_10X_VDEV_UP_CMDID, | |
1076 | WMI_10X_VDEV_STOP_CMDID, | |
1077 | WMI_10X_VDEV_DOWN_CMDID, | |
1078 | WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, | |
1079 | WMI_10X_VDEV_RESUME_RESPONSE_CMDID, | |
1080 | WMI_10X_VDEV_SET_PARAM_CMDID, | |
1081 | WMI_10X_VDEV_INSTALL_KEY_CMDID, | |
1082 | ||
1083 | /* peer specific commands */ | |
1084 | WMI_10X_PEER_CREATE_CMDID, | |
1085 | WMI_10X_PEER_DELETE_CMDID, | |
1086 | WMI_10X_PEER_FLUSH_TIDS_CMDID, | |
1087 | WMI_10X_PEER_SET_PARAM_CMDID, | |
1088 | WMI_10X_PEER_ASSOC_CMDID, | |
1089 | WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, | |
1090 | WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, | |
1091 | WMI_10X_PEER_MCAST_GROUP_CMDID, | |
1092 | ||
1093 | /* beacon/management specific commands */ | |
1094 | ||
1095 | WMI_10X_BCN_TX_CMDID, | |
1096 | WMI_10X_BCN_PRB_TMPL_CMDID, | |
1097 | WMI_10X_BCN_FILTER_RX_CMDID, | |
1098 | WMI_10X_PRB_REQ_FILTER_RX_CMDID, | |
1099 | WMI_10X_MGMT_TX_CMDID, | |
1100 | ||
1101 | /* commands to directly control ba negotiation directly from host. */ | |
1102 | WMI_10X_ADDBA_CLEAR_RESP_CMDID, | |
1103 | WMI_10X_ADDBA_SEND_CMDID, | |
1104 | WMI_10X_ADDBA_STATUS_CMDID, | |
1105 | WMI_10X_DELBA_SEND_CMDID, | |
1106 | WMI_10X_ADDBA_SET_RESP_CMDID, | |
1107 | WMI_10X_SEND_SINGLEAMSDU_CMDID, | |
1108 | ||
1109 | /* Station power save specific config */ | |
1110 | WMI_10X_STA_POWERSAVE_MODE_CMDID, | |
1111 | WMI_10X_STA_POWERSAVE_PARAM_CMDID, | |
1112 | WMI_10X_STA_MIMO_PS_MODE_CMDID, | |
1113 | ||
1114 | /* set debug log config */ | |
1115 | WMI_10X_DBGLOG_CFG_CMDID, | |
1116 | ||
1117 | /* DFS-specific commands */ | |
1118 | WMI_10X_PDEV_DFS_ENABLE_CMDID, | |
1119 | WMI_10X_PDEV_DFS_DISABLE_CMDID, | |
1120 | ||
1121 | /* QVIT specific command id */ | |
1122 | WMI_10X_PDEV_QVIT_CMDID, | |
1123 | ||
1124 | /* Offload Scan and Roaming related commands */ | |
1125 | WMI_10X_ROAM_SCAN_MODE, | |
1126 | WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, | |
1127 | WMI_10X_ROAM_SCAN_PERIOD, | |
1128 | WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, | |
1129 | WMI_10X_ROAM_AP_PROFILE, | |
1130 | WMI_10X_OFL_SCAN_ADD_AP_PROFILE, | |
1131 | WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, | |
1132 | WMI_10X_OFL_SCAN_PERIOD, | |
1133 | ||
1134 | /* P2P specific commands */ | |
1135 | WMI_10X_P2P_DEV_SET_DEVICE_INFO, | |
1136 | WMI_10X_P2P_DEV_SET_DISCOVERABILITY, | |
1137 | WMI_10X_P2P_GO_SET_BEACON_IE, | |
1138 | WMI_10X_P2P_GO_SET_PROBE_RESP_IE, | |
1139 | ||
1140 | /* AP power save specific config */ | |
1141 | WMI_10X_AP_PS_PEER_PARAM_CMDID, | |
1142 | WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, | |
1143 | ||
1144 | /* Rate-control specific commands */ | |
1145 | WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, | |
1146 | ||
1147 | /* WLAN Profiling commands. */ | |
1148 | WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, | |
1149 | WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, | |
1150 | WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, | |
1151 | WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, | |
1152 | WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, | |
1153 | ||
1154 | /* Suspend resume command Ids */ | |
1155 | WMI_10X_PDEV_SUSPEND_CMDID, | |
1156 | WMI_10X_PDEV_RESUME_CMDID, | |
1157 | ||
1158 | /* Beacon filter commands */ | |
1159 | WMI_10X_ADD_BCN_FILTER_CMDID, | |
1160 | WMI_10X_RMV_BCN_FILTER_CMDID, | |
1161 | ||
1162 | /* WOW Specific WMI commands*/ | |
1163 | WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, | |
1164 | WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, | |
1165 | WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, | |
1166 | WMI_10X_WOW_ENABLE_CMDID, | |
1167 | WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, | |
1168 | ||
1169 | /* RTT measurement related cmd */ | |
1170 | WMI_10X_RTT_MEASREQ_CMDID, | |
1171 | WMI_10X_RTT_TSF_CMDID, | |
1172 | ||
1173 | /* transmit beacon by value */ | |
1174 | WMI_10X_PDEV_SEND_BCN_CMDID, | |
1175 | ||
1176 | /* F/W stats */ | |
1177 | WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, | |
1178 | WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, | |
1179 | WMI_10X_REQUEST_STATS_CMDID, | |
1180 | ||
1181 | /* GPIO Configuration */ | |
1182 | WMI_10X_GPIO_CONFIG_CMDID, | |
1183 | WMI_10X_GPIO_OUTPUT_CMDID, | |
1184 | ||
1185 | WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, | |
1186 | }; | |
1187 | ||
1188 | enum wmi_10x_event_id { | |
1189 | WMI_10X_SERVICE_READY_EVENTID = 0x8000, | |
1190 | WMI_10X_READY_EVENTID, | |
1191 | WMI_10X_START_EVENTID = 0x9000, | |
1192 | WMI_10X_END_EVENTID = 0x9FFF, | |
1193 | ||
1194 | /* Scan specific events */ | |
1195 | WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, | |
1196 | WMI_10X_ECHO_EVENTID, | |
1197 | WMI_10X_DEBUG_MESG_EVENTID, | |
1198 | WMI_10X_UPDATE_STATS_EVENTID, | |
1199 | ||
1200 | /* Instantaneous RSSI event */ | |
1201 | WMI_10X_INST_RSSI_STATS_EVENTID, | |
1202 | ||
1203 | /* VDEV specific events */ | |
1204 | WMI_10X_VDEV_START_RESP_EVENTID, | |
1205 | WMI_10X_VDEV_STANDBY_REQ_EVENTID, | |
1206 | WMI_10X_VDEV_RESUME_REQ_EVENTID, | |
1207 | WMI_10X_VDEV_STOPPED_EVENTID, | |
1208 | ||
1209 | /* peer specific events */ | |
1210 | WMI_10X_PEER_STA_KICKOUT_EVENTID, | |
1211 | ||
1212 | /* beacon/mgmt specific events */ | |
1213 | WMI_10X_HOST_SWBA_EVENTID, | |
1214 | WMI_10X_TBTTOFFSET_UPDATE_EVENTID, | |
1215 | WMI_10X_MGMT_RX_EVENTID, | |
1216 | ||
1217 | /* Channel stats event */ | |
1218 | WMI_10X_CHAN_INFO_EVENTID, | |
1219 | ||
1220 | /* PHY Error specific WMI event */ | |
1221 | WMI_10X_PHYERR_EVENTID, | |
1222 | ||
1223 | /* Roam event to trigger roaming on host */ | |
1224 | WMI_10X_ROAM_EVENTID, | |
1225 | ||
1226 | /* matching AP found from list of profiles */ | |
1227 | WMI_10X_PROFILE_MATCH, | |
1228 | ||
1229 | /* debug print message used for tracing FW code while debugging */ | |
1230 | WMI_10X_DEBUG_PRINT_EVENTID, | |
1231 | /* VI spoecific event */ | |
1232 | WMI_10X_PDEV_QVIT_EVENTID, | |
1233 | /* FW code profile data in response to profile request */ | |
1234 | WMI_10X_WLAN_PROFILE_DATA_EVENTID, | |
1235 | ||
1236 | /*RTT related event ID*/ | |
1237 | WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, | |
1238 | WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, | |
1239 | WMI_10X_RTT_ERROR_REPORT_EVENTID, | |
1240 | ||
1241 | WMI_10X_WOW_WAKEUP_HOST_EVENTID, | |
1242 | WMI_10X_DCS_INTERFERENCE_EVENTID, | |
1243 | ||
1244 | /* TPC config for the current operating channel */ | |
1245 | WMI_10X_PDEV_TPC_CONFIG_EVENTID, | |
1246 | ||
1247 | WMI_10X_GPIO_INPUT_EVENTID, | |
1248 | WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID-1, | |
1249 | }; | |
1250 | ||
24c88f78 MK |
1251 | enum wmi_10_2_cmd_id { |
1252 | WMI_10_2_START_CMDID = 0x9000, | |
1253 | WMI_10_2_END_CMDID = 0x9FFF, | |
1254 | WMI_10_2_INIT_CMDID, | |
1255 | WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, | |
1256 | WMI_10_2_STOP_SCAN_CMDID, | |
1257 | WMI_10_2_SCAN_CHAN_LIST_CMDID, | |
1258 | WMI_10_2_ECHO_CMDID, | |
1259 | WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, | |
1260 | WMI_10_2_PDEV_SET_CHANNEL_CMDID, | |
1261 | WMI_10_2_PDEV_SET_PARAM_CMDID, | |
1262 | WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, | |
1263 | WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, | |
1264 | WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, | |
1265 | WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, | |
1266 | WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, | |
1267 | WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, | |
1268 | WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, | |
1269 | WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, | |
1270 | WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, | |
1271 | WMI_10_2_VDEV_CREATE_CMDID, | |
1272 | WMI_10_2_VDEV_DELETE_CMDID, | |
1273 | WMI_10_2_VDEV_START_REQUEST_CMDID, | |
1274 | WMI_10_2_VDEV_RESTART_REQUEST_CMDID, | |
1275 | WMI_10_2_VDEV_UP_CMDID, | |
1276 | WMI_10_2_VDEV_STOP_CMDID, | |
1277 | WMI_10_2_VDEV_DOWN_CMDID, | |
1278 | WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, | |
1279 | WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, | |
1280 | WMI_10_2_VDEV_SET_PARAM_CMDID, | |
1281 | WMI_10_2_VDEV_INSTALL_KEY_CMDID, | |
1282 | WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, | |
1283 | WMI_10_2_PEER_CREATE_CMDID, | |
1284 | WMI_10_2_PEER_DELETE_CMDID, | |
1285 | WMI_10_2_PEER_FLUSH_TIDS_CMDID, | |
1286 | WMI_10_2_PEER_SET_PARAM_CMDID, | |
1287 | WMI_10_2_PEER_ASSOC_CMDID, | |
1288 | WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, | |
1289 | WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, | |
1290 | WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, | |
1291 | WMI_10_2_PEER_MCAST_GROUP_CMDID, | |
1292 | WMI_10_2_BCN_TX_CMDID, | |
1293 | WMI_10_2_BCN_PRB_TMPL_CMDID, | |
1294 | WMI_10_2_BCN_FILTER_RX_CMDID, | |
1295 | WMI_10_2_PRB_REQ_FILTER_RX_CMDID, | |
1296 | WMI_10_2_MGMT_TX_CMDID, | |
1297 | WMI_10_2_ADDBA_CLEAR_RESP_CMDID, | |
1298 | WMI_10_2_ADDBA_SEND_CMDID, | |
1299 | WMI_10_2_ADDBA_STATUS_CMDID, | |
1300 | WMI_10_2_DELBA_SEND_CMDID, | |
1301 | WMI_10_2_ADDBA_SET_RESP_CMDID, | |
1302 | WMI_10_2_SEND_SINGLEAMSDU_CMDID, | |
1303 | WMI_10_2_STA_POWERSAVE_MODE_CMDID, | |
1304 | WMI_10_2_STA_POWERSAVE_PARAM_CMDID, | |
1305 | WMI_10_2_STA_MIMO_PS_MODE_CMDID, | |
1306 | WMI_10_2_DBGLOG_CFG_CMDID, | |
1307 | WMI_10_2_PDEV_DFS_ENABLE_CMDID, | |
1308 | WMI_10_2_PDEV_DFS_DISABLE_CMDID, | |
1309 | WMI_10_2_PDEV_QVIT_CMDID, | |
1310 | WMI_10_2_ROAM_SCAN_MODE, | |
1311 | WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, | |
1312 | WMI_10_2_ROAM_SCAN_PERIOD, | |
1313 | WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, | |
1314 | WMI_10_2_ROAM_AP_PROFILE, | |
1315 | WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, | |
1316 | WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, | |
1317 | WMI_10_2_OFL_SCAN_PERIOD, | |
1318 | WMI_10_2_P2P_DEV_SET_DEVICE_INFO, | |
1319 | WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, | |
1320 | WMI_10_2_P2P_GO_SET_BEACON_IE, | |
1321 | WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, | |
1322 | WMI_10_2_AP_PS_PEER_PARAM_CMDID, | |
1323 | WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, | |
1324 | WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, | |
1325 | WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, | |
1326 | WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, | |
1327 | WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, | |
1328 | WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, | |
1329 | WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, | |
1330 | WMI_10_2_PDEV_SUSPEND_CMDID, | |
1331 | WMI_10_2_PDEV_RESUME_CMDID, | |
1332 | WMI_10_2_ADD_BCN_FILTER_CMDID, | |
1333 | WMI_10_2_RMV_BCN_FILTER_CMDID, | |
1334 | WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, | |
1335 | WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, | |
1336 | WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, | |
1337 | WMI_10_2_WOW_ENABLE_CMDID, | |
1338 | WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, | |
1339 | WMI_10_2_RTT_MEASREQ_CMDID, | |
1340 | WMI_10_2_RTT_TSF_CMDID, | |
1341 | WMI_10_2_RTT_KEEPALIVE_CMDID, | |
1342 | WMI_10_2_PDEV_SEND_BCN_CMDID, | |
1343 | WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, | |
1344 | WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, | |
1345 | WMI_10_2_REQUEST_STATS_CMDID, | |
1346 | WMI_10_2_GPIO_CONFIG_CMDID, | |
1347 | WMI_10_2_GPIO_OUTPUT_CMDID, | |
1348 | WMI_10_2_VDEV_RATEMASK_CMDID, | |
1349 | WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, | |
1350 | WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, | |
1351 | WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, | |
1352 | WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, | |
1353 | WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, | |
1354 | WMI_10_2_FORCE_FW_HANG_CMDID, | |
1355 | WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, | |
1356 | WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, | |
1357 | WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, | |
1358 | WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, | |
1359 | WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, | |
a57a6a27 RM |
1360 | WMI_10_2_PDEV_GET_INFO, |
1361 | WMI_10_2_VDEV_GET_INFO, | |
1362 | WMI_10_2_VDEV_ATF_REQUEST_CMDID, | |
1363 | WMI_10_2_PEER_ATF_REQUEST_CMDID, | |
1364 | WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, | |
24c88f78 MK |
1365 | WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, |
1366 | }; | |
1367 | ||
1368 | enum wmi_10_2_event_id { | |
1369 | WMI_10_2_SERVICE_READY_EVENTID = 0x8000, | |
1370 | WMI_10_2_READY_EVENTID, | |
1371 | WMI_10_2_DEBUG_MESG_EVENTID, | |
1372 | WMI_10_2_START_EVENTID = 0x9000, | |
1373 | WMI_10_2_END_EVENTID = 0x9FFF, | |
1374 | WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, | |
1375 | WMI_10_2_ECHO_EVENTID, | |
1376 | WMI_10_2_UPDATE_STATS_EVENTID, | |
1377 | WMI_10_2_INST_RSSI_STATS_EVENTID, | |
1378 | WMI_10_2_VDEV_START_RESP_EVENTID, | |
1379 | WMI_10_2_VDEV_STANDBY_REQ_EVENTID, | |
1380 | WMI_10_2_VDEV_RESUME_REQ_EVENTID, | |
1381 | WMI_10_2_VDEV_STOPPED_EVENTID, | |
1382 | WMI_10_2_PEER_STA_KICKOUT_EVENTID, | |
1383 | WMI_10_2_HOST_SWBA_EVENTID, | |
1384 | WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, | |
1385 | WMI_10_2_MGMT_RX_EVENTID, | |
1386 | WMI_10_2_CHAN_INFO_EVENTID, | |
1387 | WMI_10_2_PHYERR_EVENTID, | |
1388 | WMI_10_2_ROAM_EVENTID, | |
1389 | WMI_10_2_PROFILE_MATCH, | |
1390 | WMI_10_2_DEBUG_PRINT_EVENTID, | |
1391 | WMI_10_2_PDEV_QVIT_EVENTID, | |
1392 | WMI_10_2_WLAN_PROFILE_DATA_EVENTID, | |
1393 | WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, | |
1394 | WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, | |
1395 | WMI_10_2_RTT_ERROR_REPORT_EVENTID, | |
1396 | WMI_10_2_RTT_KEEPALIVE_EVENTID, | |
1397 | WMI_10_2_WOW_WAKEUP_HOST_EVENTID, | |
1398 | WMI_10_2_DCS_INTERFERENCE_EVENTID, | |
1399 | WMI_10_2_PDEV_TPC_CONFIG_EVENTID, | |
1400 | WMI_10_2_GPIO_INPUT_EVENTID, | |
1401 | WMI_10_2_PEER_RATECODE_LIST_EVENTID, | |
1402 | WMI_10_2_GENERIC_BUFFER_EVENTID, | |
1403 | WMI_10_2_MCAST_BUF_RELEASE_EVENTID, | |
1404 | WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, | |
1405 | WMI_10_2_WDS_PEER_EVENTID, | |
a57a6a27 RM |
1406 | WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, |
1407 | WMI_10_2_PDEV_TEMPERATURE_EVENTID, | |
24c88f78 MK |
1408 | WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, |
1409 | }; | |
1410 | ||
2d491e69 RM |
1411 | enum wmi_10_4_cmd_id { |
1412 | WMI_10_4_START_CMDID = 0x9000, | |
1413 | WMI_10_4_END_CMDID = 0x9FFF, | |
1414 | WMI_10_4_INIT_CMDID, | |
1415 | WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, | |
1416 | WMI_10_4_STOP_SCAN_CMDID, | |
1417 | WMI_10_4_SCAN_CHAN_LIST_CMDID, | |
1418 | WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, | |
1419 | WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, | |
1420 | WMI_10_4_ECHO_CMDID, | |
1421 | WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, | |
1422 | WMI_10_4_PDEV_SET_CHANNEL_CMDID, | |
1423 | WMI_10_4_PDEV_SET_PARAM_CMDID, | |
1424 | WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, | |
1425 | WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, | |
1426 | WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, | |
1427 | WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, | |
1428 | WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, | |
1429 | WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, | |
1430 | WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, | |
1431 | WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, | |
1432 | WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, | |
1433 | WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, | |
1434 | WMI_10_4_VDEV_CREATE_CMDID, | |
1435 | WMI_10_4_VDEV_DELETE_CMDID, | |
1436 | WMI_10_4_VDEV_START_REQUEST_CMDID, | |
1437 | WMI_10_4_VDEV_RESTART_REQUEST_CMDID, | |
1438 | WMI_10_4_VDEV_UP_CMDID, | |
1439 | WMI_10_4_VDEV_STOP_CMDID, | |
1440 | WMI_10_4_VDEV_DOWN_CMDID, | |
1441 | WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, | |
1442 | WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, | |
1443 | WMI_10_4_VDEV_SET_PARAM_CMDID, | |
1444 | WMI_10_4_VDEV_INSTALL_KEY_CMDID, | |
1445 | WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, | |
1446 | WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, | |
1447 | WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, | |
1448 | WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, | |
1449 | WMI_10_4_PEER_CREATE_CMDID, | |
1450 | WMI_10_4_PEER_DELETE_CMDID, | |
1451 | WMI_10_4_PEER_FLUSH_TIDS_CMDID, | |
1452 | WMI_10_4_PEER_SET_PARAM_CMDID, | |
1453 | WMI_10_4_PEER_ASSOC_CMDID, | |
1454 | WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, | |
1455 | WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, | |
1456 | WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, | |
1457 | WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, | |
1458 | WMI_10_4_PEER_MCAST_GROUP_CMDID, | |
1459 | WMI_10_4_BCN_TX_CMDID, | |
1460 | WMI_10_4_PDEV_SEND_BCN_CMDID, | |
1461 | WMI_10_4_BCN_PRB_TMPL_CMDID, | |
1462 | WMI_10_4_BCN_FILTER_RX_CMDID, | |
1463 | WMI_10_4_PRB_REQ_FILTER_RX_CMDID, | |
1464 | WMI_10_4_MGMT_TX_CMDID, | |
1465 | WMI_10_4_PRB_TMPL_CMDID, | |
1466 | WMI_10_4_ADDBA_CLEAR_RESP_CMDID, | |
1467 | WMI_10_4_ADDBA_SEND_CMDID, | |
1468 | WMI_10_4_ADDBA_STATUS_CMDID, | |
1469 | WMI_10_4_DELBA_SEND_CMDID, | |
1470 | WMI_10_4_ADDBA_SET_RESP_CMDID, | |
1471 | WMI_10_4_SEND_SINGLEAMSDU_CMDID, | |
1472 | WMI_10_4_STA_POWERSAVE_MODE_CMDID, | |
1473 | WMI_10_4_STA_POWERSAVE_PARAM_CMDID, | |
1474 | WMI_10_4_STA_MIMO_PS_MODE_CMDID, | |
1475 | WMI_10_4_DBGLOG_CFG_CMDID, | |
1476 | WMI_10_4_PDEV_DFS_ENABLE_CMDID, | |
1477 | WMI_10_4_PDEV_DFS_DISABLE_CMDID, | |
1478 | WMI_10_4_PDEV_QVIT_CMDID, | |
1479 | WMI_10_4_ROAM_SCAN_MODE, | |
1480 | WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, | |
1481 | WMI_10_4_ROAM_SCAN_PERIOD, | |
1482 | WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, | |
1483 | WMI_10_4_ROAM_AP_PROFILE, | |
1484 | WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, | |
1485 | WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, | |
1486 | WMI_10_4_OFL_SCAN_PERIOD, | |
1487 | WMI_10_4_P2P_DEV_SET_DEVICE_INFO, | |
1488 | WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, | |
1489 | WMI_10_4_P2P_GO_SET_BEACON_IE, | |
1490 | WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, | |
1491 | WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, | |
1492 | WMI_10_4_AP_PS_PEER_PARAM_CMDID, | |
1493 | WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, | |
1494 | WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, | |
1495 | WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, | |
1496 | WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, | |
1497 | WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, | |
1498 | WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, | |
1499 | WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, | |
1500 | WMI_10_4_PDEV_SUSPEND_CMDID, | |
1501 | WMI_10_4_PDEV_RESUME_CMDID, | |
1502 | WMI_10_4_ADD_BCN_FILTER_CMDID, | |
1503 | WMI_10_4_RMV_BCN_FILTER_CMDID, | |
1504 | WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, | |
1505 | WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, | |
1506 | WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, | |
1507 | WMI_10_4_WOW_ENABLE_CMDID, | |
1508 | WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, | |
1509 | WMI_10_4_RTT_MEASREQ_CMDID, | |
1510 | WMI_10_4_RTT_TSF_CMDID, | |
1511 | WMI_10_4_RTT_KEEPALIVE_CMDID, | |
1512 | WMI_10_4_OEM_REQ_CMDID, | |
1513 | WMI_10_4_NAN_CMDID, | |
1514 | WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, | |
1515 | WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, | |
1516 | WMI_10_4_REQUEST_STATS_CMDID, | |
1517 | WMI_10_4_GPIO_CONFIG_CMDID, | |
1518 | WMI_10_4_GPIO_OUTPUT_CMDID, | |
1519 | WMI_10_4_VDEV_RATEMASK_CMDID, | |
1520 | WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, | |
1521 | WMI_10_4_GTK_OFFLOAD_CMDID, | |
1522 | WMI_10_4_QBOOST_CFG_CMDID, | |
1523 | WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, | |
1524 | WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, | |
1525 | WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, | |
1526 | WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, | |
1527 | WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, | |
1528 | WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, | |
1529 | WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, | |
1530 | WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, | |
1531 | WMI_10_4_FORCE_FW_HANG_CMDID, | |
1532 | WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, | |
1533 | WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, | |
1534 | WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, | |
1535 | WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, | |
1536 | WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, | |
1537 | WMI_10_4_PDEV_FIPS_CMDID, | |
1538 | WMI_10_4_TT_SET_CONF_CMDID, | |
1539 | WMI_10_4_FWTEST_CMDID, | |
1540 | WMI_10_4_VDEV_ATF_REQUEST_CMDID, | |
1541 | WMI_10_4_PEER_ATF_REQUEST_CMDID, | |
1542 | WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, | |
1543 | WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, | |
1544 | WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, | |
1545 | WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, | |
1546 | WMI_10_4_PDEV_GET_TPC_CMDID, | |
1547 | WMI_10_4_PDEV_GET_AST_INFO_CMDID, | |
1548 | WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, | |
1549 | WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, | |
1550 | WMI_10_4_PDEV_GET_INFO_CMDID, | |
1551 | WMI_10_4_VDEV_GET_INFO_CMDID, | |
1552 | WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, | |
1553 | WMI_10_4_MU_CAL_START_CMDID, | |
1554 | WMI_10_4_SET_CCA_PARAMS_CMDID, | |
1555 | WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, | |
1556 | WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, | |
1557 | }; | |
1558 | ||
1559 | enum wmi_10_4_event_id { | |
1560 | WMI_10_4_SERVICE_READY_EVENTID = 0x8000, | |
1561 | WMI_10_4_READY_EVENTID, | |
1562 | WMI_10_4_DEBUG_MESG_EVENTID, | |
1563 | WMI_10_4_START_EVENTID = 0x9000, | |
1564 | WMI_10_4_END_EVENTID = 0x9FFF, | |
1565 | WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, | |
1566 | WMI_10_4_ECHO_EVENTID, | |
1567 | WMI_10_4_UPDATE_STATS_EVENTID, | |
1568 | WMI_10_4_INST_RSSI_STATS_EVENTID, | |
1569 | WMI_10_4_VDEV_START_RESP_EVENTID, | |
1570 | WMI_10_4_VDEV_STANDBY_REQ_EVENTID, | |
1571 | WMI_10_4_VDEV_RESUME_REQ_EVENTID, | |
1572 | WMI_10_4_VDEV_STOPPED_EVENTID, | |
1573 | WMI_10_4_PEER_STA_KICKOUT_EVENTID, | |
1574 | WMI_10_4_HOST_SWBA_EVENTID, | |
1575 | WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, | |
1576 | WMI_10_4_MGMT_RX_EVENTID, | |
1577 | WMI_10_4_CHAN_INFO_EVENTID, | |
1578 | WMI_10_4_PHYERR_EVENTID, | |
1579 | WMI_10_4_ROAM_EVENTID, | |
1580 | WMI_10_4_PROFILE_MATCH, | |
1581 | WMI_10_4_DEBUG_PRINT_EVENTID, | |
1582 | WMI_10_4_PDEV_QVIT_EVENTID, | |
1583 | WMI_10_4_WLAN_PROFILE_DATA_EVENTID, | |
1584 | WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, | |
1585 | WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, | |
1586 | WMI_10_4_RTT_ERROR_REPORT_EVENTID, | |
1587 | WMI_10_4_RTT_KEEPALIVE_EVENTID, | |
1588 | WMI_10_4_OEM_CAPABILITY_EVENTID, | |
1589 | WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, | |
1590 | WMI_10_4_OEM_ERROR_REPORT_EVENTID, | |
1591 | WMI_10_4_NAN_EVENTID, | |
1592 | WMI_10_4_WOW_WAKEUP_HOST_EVENTID, | |
1593 | WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, | |
1594 | WMI_10_4_GTK_REKEY_FAIL_EVENTID, | |
1595 | WMI_10_4_DCS_INTERFERENCE_EVENTID, | |
1596 | WMI_10_4_PDEV_TPC_CONFIG_EVENTID, | |
1597 | WMI_10_4_CSA_HANDLING_EVENTID, | |
1598 | WMI_10_4_GPIO_INPUT_EVENTID, | |
1599 | WMI_10_4_PEER_RATECODE_LIST_EVENTID, | |
1600 | WMI_10_4_GENERIC_BUFFER_EVENTID, | |
1601 | WMI_10_4_MCAST_BUF_RELEASE_EVENTID, | |
1602 | WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, | |
1603 | WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, | |
1604 | WMI_10_4_WDS_PEER_EVENTID, | |
1605 | WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, | |
1606 | WMI_10_4_PDEV_FIPS_EVENTID, | |
1607 | WMI_10_4_TT_STATS_EVENTID, | |
1608 | WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, | |
1609 | WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, | |
1610 | WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, | |
1611 | WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, | |
1612 | WMI_10_4_PDEV_NFCAL_POWER_EVENTID, | |
1613 | WMI_10_4_PDEV_TPC_EVENTID, | |
1614 | WMI_10_4_PDEV_GET_AST_INFO_EVENTID, | |
1615 | WMI_10_4_PDEV_TEMPERATURE_EVENTID, | |
1616 | WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, | |
1617 | WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, | |
1618 | WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, | |
1619 | }; | |
1620 | ||
5e3dd157 KV |
1621 | enum wmi_phy_mode { |
1622 | MODE_11A = 0, /* 11a Mode */ | |
1623 | MODE_11G = 1, /* 11b/g Mode */ | |
1624 | MODE_11B = 2, /* 11b Mode */ | |
1625 | MODE_11GONLY = 3, /* 11g only Mode */ | |
1626 | MODE_11NA_HT20 = 4, /* 11a HT20 mode */ | |
1627 | MODE_11NG_HT20 = 5, /* 11g HT20 mode */ | |
1628 | MODE_11NA_HT40 = 6, /* 11a HT40 mode */ | |
1629 | MODE_11NG_HT40 = 7, /* 11g HT40 mode */ | |
1630 | MODE_11AC_VHT20 = 8, | |
1631 | MODE_11AC_VHT40 = 9, | |
1632 | MODE_11AC_VHT80 = 10, | |
1633 | /* MODE_11AC_VHT160 = 11, */ | |
1634 | MODE_11AC_VHT20_2G = 11, | |
1635 | MODE_11AC_VHT40_2G = 12, | |
1636 | MODE_11AC_VHT80_2G = 13, | |
1637 | MODE_UNKNOWN = 14, | |
1638 | MODE_MAX = 14 | |
1639 | }; | |
1640 | ||
38a1d47e KV |
1641 | static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) |
1642 | { | |
1643 | switch (mode) { | |
1644 | case MODE_11A: | |
1645 | return "11a"; | |
1646 | case MODE_11G: | |
1647 | return "11g"; | |
1648 | case MODE_11B: | |
1649 | return "11b"; | |
1650 | case MODE_11GONLY: | |
1651 | return "11gonly"; | |
1652 | case MODE_11NA_HT20: | |
1653 | return "11na-ht20"; | |
1654 | case MODE_11NG_HT20: | |
1655 | return "11ng-ht20"; | |
1656 | case MODE_11NA_HT40: | |
1657 | return "11na-ht40"; | |
1658 | case MODE_11NG_HT40: | |
1659 | return "11ng-ht40"; | |
1660 | case MODE_11AC_VHT20: | |
1661 | return "11ac-vht20"; | |
1662 | case MODE_11AC_VHT40: | |
1663 | return "11ac-vht40"; | |
1664 | case MODE_11AC_VHT80: | |
1665 | return "11ac-vht80"; | |
1666 | case MODE_11AC_VHT20_2G: | |
1667 | return "11ac-vht20-2g"; | |
1668 | case MODE_11AC_VHT40_2G: | |
1669 | return "11ac-vht40-2g"; | |
1670 | case MODE_11AC_VHT80_2G: | |
1671 | return "11ac-vht80-2g"; | |
1672 | case MODE_UNKNOWN: | |
1673 | /* skip */ | |
1674 | break; | |
1675 | ||
1676 | /* no default handler to allow compiler to check that the | |
1677 | * enum is fully handled */ | |
1678 | }; | |
1679 | ||
1680 | return "<unknown>"; | |
1681 | } | |
1682 | ||
5e3dd157 KV |
1683 | #define WMI_CHAN_LIST_TAG 0x1 |
1684 | #define WMI_SSID_LIST_TAG 0x2 | |
1685 | #define WMI_BSSID_LIST_TAG 0x3 | |
1686 | #define WMI_IE_TAG 0x4 | |
1687 | ||
1688 | struct wmi_channel { | |
1689 | __le32 mhz; | |
1690 | __le32 band_center_freq1; | |
1691 | __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ | |
1692 | union { | |
1693 | __le32 flags; /* WMI_CHAN_FLAG_ */ | |
1694 | struct { | |
1695 | u8 mode; /* only 6 LSBs */ | |
1696 | } __packed; | |
1697 | } __packed; | |
1698 | union { | |
1699 | __le32 reginfo0; | |
1700 | struct { | |
02256930 | 1701 | /* note: power unit is 0.5 dBm */ |
5e3dd157 KV |
1702 | u8 min_power; |
1703 | u8 max_power; | |
1704 | u8 reg_power; | |
1705 | u8 reg_classid; | |
1706 | } __packed; | |
1707 | } __packed; | |
1708 | union { | |
1709 | __le32 reginfo1; | |
1710 | struct { | |
1711 | u8 antenna_max; | |
1712 | } __packed; | |
1713 | } __packed; | |
1714 | } __packed; | |
1715 | ||
1716 | struct wmi_channel_arg { | |
1717 | u32 freq; | |
1718 | u32 band_center_freq1; | |
1719 | bool passive; | |
1720 | bool allow_ibss; | |
1721 | bool allow_ht; | |
1722 | bool allow_vht; | |
1723 | bool ht40plus; | |
e8a50f8b | 1724 | bool chan_radar; |
02256930 | 1725 | /* note: power unit is 0.5 dBm */ |
5e3dd157 KV |
1726 | u32 min_power; |
1727 | u32 max_power; | |
1728 | u32 max_reg_power; | |
1729 | u32 max_antenna_gain; | |
1730 | u32 reg_class_id; | |
1731 | enum wmi_phy_mode mode; | |
1732 | }; | |
1733 | ||
1734 | enum wmi_channel_change_cause { | |
1735 | WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, | |
1736 | WMI_CHANNEL_CHANGE_CAUSE_CSA, | |
1737 | }; | |
1738 | ||
1739 | #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) | |
1740 | #define WMI_CHAN_FLAG_PASSIVE (1 << 7) | |
1741 | #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) | |
1742 | #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) | |
1743 | #define WMI_CHAN_FLAG_DFS (1 << 10) | |
1744 | #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) | |
1745 | #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) | |
1746 | ||
1747 | /* Indicate reason for channel switch */ | |
1748 | #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) | |
1749 | ||
1750 | #define WMI_MAX_SPATIAL_STREAM 3 | |
1751 | ||
1752 | /* HT Capabilities*/ | |
1753 | #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ | |
1754 | #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ | |
1755 | #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ | |
1756 | #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ | |
1757 | #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 | |
1758 | #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ | |
1759 | #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 | |
1760 | #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ | |
1761 | #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ | |
1762 | #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ | |
1763 | #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 | |
1764 | #define WMI_HT_CAP_HT40_SGI 0x0800 | |
1765 | ||
1766 | #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ | |
1767 | WMI_HT_CAP_HT20_SGI | \ | |
1768 | WMI_HT_CAP_HT40_SGI | \ | |
1769 | WMI_HT_CAP_TX_STBC | \ | |
1770 | WMI_HT_CAP_RX_STBC | \ | |
1771 | WMI_HT_CAP_LDPC) | |
1772 | ||
5e3dd157 KV |
1773 | /* |
1774 | * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information | |
1775 | * field. The fields not defined here are not supported, or reserved. | |
1776 | * Do not change these masks and if you have to add new one follow the | |
1777 | * bitmask as specified by 802.11ac draft. | |
1778 | */ | |
1779 | ||
1780 | #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 | |
1781 | #define WMI_VHT_CAP_RX_LDPC 0x00000010 | |
1782 | #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 | |
1783 | #define WMI_VHT_CAP_TX_STBC 0x00000080 | |
1784 | #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 | |
1785 | #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 | |
1786 | #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 | |
1787 | #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 | |
1788 | #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 | |
1789 | #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 | |
1790 | ||
1791 | /* The following also refer for max HT AMSDU */ | |
1792 | #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 | |
1793 | #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 | |
1794 | #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 | |
1795 | ||
1796 | #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ | |
1797 | WMI_VHT_CAP_RX_LDPC | \ | |
1798 | WMI_VHT_CAP_SGI_80MHZ | \ | |
1799 | WMI_VHT_CAP_TX_STBC | \ | |
1800 | WMI_VHT_CAP_RX_STBC_MASK | \ | |
1801 | WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ | |
1802 | WMI_VHT_CAP_RX_FIXED_ANT | \ | |
1803 | WMI_VHT_CAP_TX_FIXED_ANT) | |
1804 | ||
1805 | /* | |
1806 | * Interested readers refer to Rx/Tx MCS Map definition as defined in | |
1807 | * 802.11ac | |
1808 | */ | |
1809 | #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) | |
1810 | #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 | |
1811 | #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 | |
1812 | ||
1813 | enum { | |
1814 | REGDMN_MODE_11A = 0x00001, /* 11a channels */ | |
1815 | REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ | |
1816 | REGDMN_MODE_11B = 0x00004, /* 11b channels */ | |
1817 | REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ | |
1818 | REGDMN_MODE_11G = 0x00008, /* XXX historical */ | |
1819 | REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ | |
1820 | REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ | |
1821 | REGDMN_MODE_XR = 0x00100, /* XR channels */ | |
1822 | REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ | |
1823 | REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ | |
1824 | REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ | |
1825 | REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ | |
1826 | REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ | |
1827 | REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ | |
1828 | REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ | |
1829 | REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ | |
1830 | REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ | |
1831 | REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ | |
1832 | REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ | |
1833 | REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ | |
1834 | REGDMN_MODE_ALL = 0xffffffff | |
1835 | }; | |
1836 | ||
1837 | #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 | |
1838 | #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 | |
1839 | #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 | |
1840 | ||
1841 | /* regulatory capabilities */ | |
1842 | #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 | |
1843 | #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 | |
1844 | #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 | |
1845 | #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 | |
1846 | #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 | |
1847 | #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 | |
1848 | ||
1849 | struct hal_reg_capabilities { | |
1850 | /* regdomain value specified in EEPROM */ | |
1851 | __le32 eeprom_rd; | |
1852 | /*regdomain */ | |
1853 | __le32 eeprom_rd_ext; | |
1854 | /* CAP1 capabilities bit map. */ | |
1855 | __le32 regcap1; | |
1856 | /* REGDMN EEPROM CAP. */ | |
1857 | __le32 regcap2; | |
1858 | /* REGDMN MODE */ | |
1859 | __le32 wireless_modes; | |
1860 | __le32 low_2ghz_chan; | |
1861 | __le32 high_2ghz_chan; | |
1862 | __le32 low_5ghz_chan; | |
1863 | __le32 high_5ghz_chan; | |
1864 | } __packed; | |
1865 | ||
1866 | enum wlan_mode_capability { | |
1867 | WHAL_WLAN_11A_CAPABILITY = 0x1, | |
1868 | WHAL_WLAN_11G_CAPABILITY = 0x2, | |
1869 | WHAL_WLAN_11AG_CAPABILITY = 0x3, | |
1870 | }; | |
1871 | ||
1872 | /* structure used by FW for requesting host memory */ | |
1873 | struct wlan_host_mem_req { | |
1874 | /* ID of the request */ | |
1875 | __le32 req_id; | |
1876 | /* size of the of each unit */ | |
1877 | __le32 unit_size; | |
1878 | /* flags to indicate that | |
1879 | * the number units is dependent | |
1880 | * on number of resources(num vdevs num peers .. etc) | |
1881 | */ | |
1882 | __le32 num_unit_info; | |
1883 | /* | |
1884 | * actual number of units to allocate . if flags in the num_unit_info | |
1885 | * indicate that number of units is tied to number of a particular | |
1886 | * resource to allocate then num_units filed is set to 0 and host | |
1887 | * will derive the number units from number of the resources it is | |
1888 | * requesting. | |
1889 | */ | |
1890 | __le32 num_units; | |
1891 | } __packed; | |
1892 | ||
5e3dd157 KV |
1893 | /* |
1894 | * The following struct holds optional payload for | |
1895 | * wmi_service_ready_event,e.g., 11ac pass some of the | |
1896 | * device capability to the host. | |
1897 | */ | |
1898 | struct wmi_service_ready_event { | |
1899 | __le32 sw_version; | |
1900 | __le32 sw_version_1; | |
1901 | __le32 abi_version; | |
1902 | /* WMI_PHY_CAPABILITY */ | |
1903 | __le32 phy_capability; | |
1904 | /* Maximum number of frag table entries that SW will populate less 1 */ | |
1905 | __le32 max_frag_entry; | |
c4f8c836 | 1906 | __le32 wmi_service_bitmap[16]; |
5e3dd157 KV |
1907 | __le32 num_rf_chains; |
1908 | /* | |
1909 | * The following field is only valid for service type | |
1910 | * WMI_SERVICE_11AC | |
1911 | */ | |
1912 | __le32 ht_cap_info; /* WMI HT Capability */ | |
1913 | __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ | |
1914 | __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ | |
1915 | __le32 hw_min_tx_power; | |
1916 | __le32 hw_max_tx_power; | |
1917 | struct hal_reg_capabilities hal_reg_capabilities; | |
1918 | __le32 sys_cap_info; | |
1919 | __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ | |
1920 | /* | |
1921 | * Max beacon and Probe Response IE offload size | |
1922 | * (includes optional P2P IEs) | |
1923 | */ | |
1924 | __le32 max_bcn_ie_size; | |
1925 | /* | |
1926 | * request to host to allocate a chuck of memory and pss it down to FW | |
1927 | * via WM_INIT. FW uses this as FW extesnsion memory for saving its | |
1928 | * data structures. Only valid for low latency interfaces like PCIE | |
1929 | * where FW can access this memory directly (or) by DMA. | |
1930 | */ | |
1931 | __le32 num_mem_reqs; | |
5c01aa3d | 1932 | struct wlan_host_mem_req mem_reqs[0]; |
5e3dd157 KV |
1933 | } __packed; |
1934 | ||
6f97d256 | 1935 | /* This is the definition from 10.X firmware branch */ |
5c01aa3d | 1936 | struct wmi_10x_service_ready_event { |
6f97d256 BM |
1937 | __le32 sw_version; |
1938 | __le32 abi_version; | |
1939 | ||
1940 | /* WMI_PHY_CAPABILITY */ | |
1941 | __le32 phy_capability; | |
1942 | ||
1943 | /* Maximum number of frag table entries that SW will populate less 1 */ | |
1944 | __le32 max_frag_entry; | |
c4f8c836 | 1945 | __le32 wmi_service_bitmap[16]; |
6f97d256 BM |
1946 | __le32 num_rf_chains; |
1947 | ||
1948 | /* | |
1949 | * The following field is only valid for service type | |
1950 | * WMI_SERVICE_11AC | |
1951 | */ | |
1952 | __le32 ht_cap_info; /* WMI HT Capability */ | |
1953 | __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ | |
1954 | __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ | |
1955 | __le32 hw_min_tx_power; | |
1956 | __le32 hw_max_tx_power; | |
1957 | ||
1958 | struct hal_reg_capabilities hal_reg_capabilities; | |
1959 | ||
1960 | __le32 sys_cap_info; | |
1961 | __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ | |
1962 | ||
1963 | /* | |
1964 | * request to host to allocate a chuck of memory and pss it down to FW | |
1965 | * via WM_INIT. FW uses this as FW extesnsion memory for saving its | |
1966 | * data structures. Only valid for low latency interfaces like PCIE | |
1967 | * where FW can access this memory directly (or) by DMA. | |
1968 | */ | |
1969 | __le32 num_mem_reqs; | |
1970 | ||
5c01aa3d | 1971 | struct wlan_host_mem_req mem_reqs[0]; |
6f97d256 BM |
1972 | } __packed; |
1973 | ||
5e3dd157 KV |
1974 | #define WMI_SERVICE_READY_TIMEOUT_HZ (5*HZ) |
1975 | #define WMI_UNIFIED_READY_TIMEOUT_HZ (5*HZ) | |
1976 | ||
1977 | struct wmi_ready_event { | |
1978 | __le32 sw_version; | |
1979 | __le32 abi_version; | |
1980 | struct wmi_mac_addr mac_addr; | |
1981 | __le32 status; | |
1982 | } __packed; | |
1983 | ||
1984 | struct wmi_resource_config { | |
1985 | /* number of virtual devices (VAPs) to support */ | |
1986 | __le32 num_vdevs; | |
1987 | ||
1988 | /* number of peer nodes to support */ | |
1989 | __le32 num_peers; | |
1990 | ||
1991 | /* | |
1992 | * In offload mode target supports features like WOW, chatter and | |
1993 | * other protocol offloads. In order to support them some | |
1994 | * functionalities like reorder buffering, PN checking need to be | |
1995 | * done in target. This determines maximum number of peers suported | |
1996 | * by target in offload mode | |
1997 | */ | |
1998 | __le32 num_offload_peers; | |
1999 | ||
2000 | /* For target-based RX reordering */ | |
2001 | __le32 num_offload_reorder_bufs; | |
2002 | ||
2003 | /* number of keys per peer */ | |
2004 | __le32 num_peer_keys; | |
2005 | ||
2006 | /* total number of TX/RX data TIDs */ | |
2007 | __le32 num_tids; | |
2008 | ||
2009 | /* | |
2010 | * max skid for resolving hash collisions | |
2011 | * | |
2012 | * The address search table is sparse, so that if two MAC addresses | |
2013 | * result in the same hash value, the second of these conflicting | |
2014 | * entries can slide to the next index in the address search table, | |
2015 | * and use it, if it is unoccupied. This ast_skid_limit parameter | |
2016 | * specifies the upper bound on how many subsequent indices to search | |
2017 | * over to find an unoccupied space. | |
2018 | */ | |
2019 | __le32 ast_skid_limit; | |
2020 | ||
2021 | /* | |
2022 | * the nominal chain mask for transmit | |
2023 | * | |
2024 | * The chain mask may be modified dynamically, e.g. to operate AP | |
2025 | * tx with a reduced number of chains if no clients are associated. | |
2026 | * This configuration parameter specifies the nominal chain-mask that | |
2027 | * should be used when not operating with a reduced set of tx chains. | |
2028 | */ | |
2029 | __le32 tx_chain_mask; | |
2030 | ||
2031 | /* | |
2032 | * the nominal chain mask for receive | |
2033 | * | |
2034 | * The chain mask may be modified dynamically, e.g. for a client | |
2035 | * to use a reduced number of chains for receive if the traffic to | |
2036 | * the client is low enough that it doesn't require downlink MIMO | |
2037 | * or antenna diversity. | |
2038 | * This configuration parameter specifies the nominal chain-mask that | |
2039 | * should be used when not operating with a reduced set of rx chains. | |
2040 | */ | |
2041 | __le32 rx_chain_mask; | |
2042 | ||
2043 | /* | |
2044 | * what rx reorder timeout (ms) to use for the AC | |
2045 | * | |
2046 | * Each WMM access class (voice, video, best-effort, background) will | |
2047 | * have its own timeout value to dictate how long to wait for missing | |
2048 | * rx MPDUs to arrive before flushing subsequent MPDUs that have | |
2049 | * already been received. | |
2050 | * This parameter specifies the timeout in milliseconds for each | |
2051 | * class. | |
2052 | */ | |
2053 | __le32 rx_timeout_pri_vi; | |
2054 | __le32 rx_timeout_pri_vo; | |
2055 | __le32 rx_timeout_pri_be; | |
2056 | __le32 rx_timeout_pri_bk; | |
2057 | ||
2058 | /* | |
2059 | * what mode the rx should decap packets to | |
2060 | * | |
2061 | * MAC can decap to RAW (no decap), native wifi or Ethernet types | |
2062 | * THis setting also determines the default TX behavior, however TX | |
2063 | * behavior can be modified on a per VAP basis during VAP init | |
2064 | */ | |
2065 | __le32 rx_decap_mode; | |
2066 | ||
8e4a4f5d | 2067 | /* what is the maximum number of scan requests that can be queued */ |
5e3dd157 KV |
2068 | __le32 scan_max_pending_reqs; |
2069 | ||
2070 | /* maximum VDEV that could use BMISS offload */ | |
2071 | __le32 bmiss_offload_max_vdev; | |
2072 | ||
2073 | /* maximum VDEV that could use offload roaming */ | |
2074 | __le32 roam_offload_max_vdev; | |
2075 | ||
2076 | /* maximum AP profiles that would push to offload roaming */ | |
2077 | __le32 roam_offload_max_ap_profiles; | |
2078 | ||
2079 | /* | |
2080 | * how many groups to use for mcast->ucast conversion | |
2081 | * | |
2082 | * The target's WAL maintains a table to hold information regarding | |
2083 | * which peers belong to a given multicast group, so that if | |
2084 | * multicast->unicast conversion is enabled, the target can convert | |
2085 | * multicast tx frames to a series of unicast tx frames, to each | |
2086 | * peer within the multicast group. | |
2087 | This num_mcast_groups configuration parameter tells the target how | |
2088 | * many multicast groups to provide storage for within its multicast | |
2089 | * group membership table. | |
2090 | */ | |
2091 | __le32 num_mcast_groups; | |
2092 | ||
2093 | /* | |
2094 | * size to alloc for the mcast membership table | |
2095 | * | |
2096 | * This num_mcast_table_elems configuration parameter tells the | |
2097 | * target how many peer elements it needs to provide storage for in | |
2098 | * its multicast group membership table. | |
2099 | * These multicast group membership table elements are shared by the | |
2100 | * multicast groups stored within the table. | |
2101 | */ | |
2102 | __le32 num_mcast_table_elems; | |
2103 | ||
2104 | /* | |
2105 | * whether/how to do multicast->unicast conversion | |
2106 | * | |
2107 | * This configuration parameter specifies whether the target should | |
2108 | * perform multicast --> unicast conversion on transmit, and if so, | |
2109 | * what to do if it finds no entries in its multicast group | |
2110 | * membership table for the multicast IP address in the tx frame. | |
2111 | * Configuration value: | |
2112 | * 0 -> Do not perform multicast to unicast conversion. | |
2113 | * 1 -> Convert multicast frames to unicast, if the IP multicast | |
2114 | * address from the tx frame is found in the multicast group | |
2115 | * membership table. If the IP multicast address is not found, | |
2116 | * drop the frame. | |
2117 | * 2 -> Convert multicast frames to unicast, if the IP multicast | |
2118 | * address from the tx frame is found in the multicast group | |
2119 | * membership table. If the IP multicast address is not found, | |
2120 | * transmit the frame as multicast. | |
2121 | */ | |
2122 | __le32 mcast2ucast_mode; | |
2123 | ||
2124 | /* | |
2125 | * how much memory to allocate for a tx PPDU dbg log | |
2126 | * | |
2127 | * This parameter controls how much memory the target will allocate | |
2128 | * to store a log of tx PPDU meta-information (how large the PPDU | |
2129 | * was, when it was sent, whether it was successful, etc.) | |
2130 | */ | |
2131 | __le32 tx_dbg_log_size; | |
2132 | ||
2133 | /* how many AST entries to be allocated for WDS */ | |
2134 | __le32 num_wds_entries; | |
2135 | ||
2136 | /* | |
2137 | * MAC DMA burst size, e.g., For target PCI limit can be | |
2138 | * 0 -default, 1 256B | |
2139 | */ | |
2140 | __le32 dma_burst_size; | |
2141 | ||
2142 | /* | |
2143 | * Fixed delimiters to be inserted after every MPDU to | |
2144 | * account for interface latency to avoid underrun. | |
2145 | */ | |
2146 | __le32 mac_aggr_delim; | |
2147 | ||
2148 | /* | |
2149 | * determine whether target is responsible for detecting duplicate | |
2150 | * non-aggregate MPDU and timing out stale fragments. | |
2151 | * | |
2152 | * A-MPDU reordering is always performed on the target. | |
2153 | * | |
2154 | * 0: target responsible for frag timeout and dup checking | |
2155 | * 1: host responsible for frag timeout and dup checking | |
2156 | */ | |
2157 | __le32 rx_skip_defrag_timeout_dup_detection_check; | |
2158 | ||
2159 | /* | |
2160 | * Configuration for VoW : | |
2161 | * No of Video Nodes to be supported | |
2162 | * and Max no of descriptors for each Video link (node). | |
2163 | */ | |
2164 | __le32 vow_config; | |
2165 | ||
2166 | /* maximum VDEV that could use GTK offload */ | |
2167 | __le32 gtk_offload_max_vdev; | |
2168 | ||
2169 | /* Number of msdu descriptors target should use */ | |
2170 | __le32 num_msdu_desc; | |
2171 | ||
2172 | /* | |
2173 | * Max. number of Tx fragments per MSDU | |
2174 | * This parameter controls the max number of Tx fragments per MSDU. | |
2175 | * This is sent by the target as part of the WMI_SERVICE_READY event | |
2176 | * and is overriden by the OS shim as required. | |
2177 | */ | |
2178 | __le32 max_frag_entries; | |
2179 | } __packed; | |
2180 | ||
12b2b9e3 BM |
2181 | struct wmi_resource_config_10x { |
2182 | /* number of virtual devices (VAPs) to support */ | |
2183 | __le32 num_vdevs; | |
2184 | ||
2185 | /* number of peer nodes to support */ | |
2186 | __le32 num_peers; | |
2187 | ||
2188 | /* number of keys per peer */ | |
2189 | __le32 num_peer_keys; | |
2190 | ||
2191 | /* total number of TX/RX data TIDs */ | |
2192 | __le32 num_tids; | |
2193 | ||
2194 | /* | |
2195 | * max skid for resolving hash collisions | |
2196 | * | |
2197 | * The address search table is sparse, so that if two MAC addresses | |
2198 | * result in the same hash value, the second of these conflicting | |
2199 | * entries can slide to the next index in the address search table, | |
2200 | * and use it, if it is unoccupied. This ast_skid_limit parameter | |
2201 | * specifies the upper bound on how many subsequent indices to search | |
2202 | * over to find an unoccupied space. | |
2203 | */ | |
2204 | __le32 ast_skid_limit; | |
2205 | ||
2206 | /* | |
2207 | * the nominal chain mask for transmit | |
2208 | * | |
2209 | * The chain mask may be modified dynamically, e.g. to operate AP | |
2210 | * tx with a reduced number of chains if no clients are associated. | |
2211 | * This configuration parameter specifies the nominal chain-mask that | |
2212 | * should be used when not operating with a reduced set of tx chains. | |
2213 | */ | |
2214 | __le32 tx_chain_mask; | |
2215 | ||
2216 | /* | |
2217 | * the nominal chain mask for receive | |
2218 | * | |
2219 | * The chain mask may be modified dynamically, e.g. for a client | |
2220 | * to use a reduced number of chains for receive if the traffic to | |
2221 | * the client is low enough that it doesn't require downlink MIMO | |
2222 | * or antenna diversity. | |
2223 | * This configuration parameter specifies the nominal chain-mask that | |
2224 | * should be used when not operating with a reduced set of rx chains. | |
2225 | */ | |
2226 | __le32 rx_chain_mask; | |
2227 | ||
2228 | /* | |
2229 | * what rx reorder timeout (ms) to use for the AC | |
2230 | * | |
2231 | * Each WMM access class (voice, video, best-effort, background) will | |
2232 | * have its own timeout value to dictate how long to wait for missing | |
2233 | * rx MPDUs to arrive before flushing subsequent MPDUs that have | |
2234 | * already been received. | |
2235 | * This parameter specifies the timeout in milliseconds for each | |
2236 | * class. | |
2237 | */ | |
2238 | __le32 rx_timeout_pri_vi; | |
2239 | __le32 rx_timeout_pri_vo; | |
2240 | __le32 rx_timeout_pri_be; | |
2241 | __le32 rx_timeout_pri_bk; | |
2242 | ||
2243 | /* | |
2244 | * what mode the rx should decap packets to | |
2245 | * | |
2246 | * MAC can decap to RAW (no decap), native wifi or Ethernet types | |
2247 | * THis setting also determines the default TX behavior, however TX | |
2248 | * behavior can be modified on a per VAP basis during VAP init | |
2249 | */ | |
2250 | __le32 rx_decap_mode; | |
2251 | ||
8e4a4f5d | 2252 | /* what is the maximum number of scan requests that can be queued */ |
12b2b9e3 BM |
2253 | __le32 scan_max_pending_reqs; |
2254 | ||
2255 | /* maximum VDEV that could use BMISS offload */ | |
2256 | __le32 bmiss_offload_max_vdev; | |
2257 | ||
2258 | /* maximum VDEV that could use offload roaming */ | |
2259 | __le32 roam_offload_max_vdev; | |
2260 | ||
2261 | /* maximum AP profiles that would push to offload roaming */ | |
2262 | __le32 roam_offload_max_ap_profiles; | |
2263 | ||
2264 | /* | |
2265 | * how many groups to use for mcast->ucast conversion | |
2266 | * | |
2267 | * The target's WAL maintains a table to hold information regarding | |
2268 | * which peers belong to a given multicast group, so that if | |
2269 | * multicast->unicast conversion is enabled, the target can convert | |
2270 | * multicast tx frames to a series of unicast tx frames, to each | |
2271 | * peer within the multicast group. | |
2272 | This num_mcast_groups configuration parameter tells the target how | |
2273 | * many multicast groups to provide storage for within its multicast | |
2274 | * group membership table. | |
2275 | */ | |
2276 | __le32 num_mcast_groups; | |
2277 | ||
2278 | /* | |
2279 | * size to alloc for the mcast membership table | |
2280 | * | |
2281 | * This num_mcast_table_elems configuration parameter tells the | |
2282 | * target how many peer elements it needs to provide storage for in | |
2283 | * its multicast group membership table. | |
2284 | * These multicast group membership table elements are shared by the | |
2285 | * multicast groups stored within the table. | |
2286 | */ | |
2287 | __le32 num_mcast_table_elems; | |
2288 | ||
2289 | /* | |
2290 | * whether/how to do multicast->unicast conversion | |
2291 | * | |
2292 | * This configuration parameter specifies whether the target should | |
2293 | * perform multicast --> unicast conversion on transmit, and if so, | |
2294 | * what to do if it finds no entries in its multicast group | |
2295 | * membership table for the multicast IP address in the tx frame. | |
2296 | * Configuration value: | |
2297 | * 0 -> Do not perform multicast to unicast conversion. | |
2298 | * 1 -> Convert multicast frames to unicast, if the IP multicast | |
2299 | * address from the tx frame is found in the multicast group | |
2300 | * membership table. If the IP multicast address is not found, | |
2301 | * drop the frame. | |
2302 | * 2 -> Convert multicast frames to unicast, if the IP multicast | |
2303 | * address from the tx frame is found in the multicast group | |
2304 | * membership table. If the IP multicast address is not found, | |
2305 | * transmit the frame as multicast. | |
2306 | */ | |
2307 | __le32 mcast2ucast_mode; | |
2308 | ||
2309 | /* | |
2310 | * how much memory to allocate for a tx PPDU dbg log | |
2311 | * | |
2312 | * This parameter controls how much memory the target will allocate | |
2313 | * to store a log of tx PPDU meta-information (how large the PPDU | |
2314 | * was, when it was sent, whether it was successful, etc.) | |
2315 | */ | |
2316 | __le32 tx_dbg_log_size; | |
2317 | ||
2318 | /* how many AST entries to be allocated for WDS */ | |
2319 | __le32 num_wds_entries; | |
2320 | ||
2321 | /* | |
2322 | * MAC DMA burst size, e.g., For target PCI limit can be | |
2323 | * 0 -default, 1 256B | |
2324 | */ | |
2325 | __le32 dma_burst_size; | |
2326 | ||
2327 | /* | |
2328 | * Fixed delimiters to be inserted after every MPDU to | |
2329 | * account for interface latency to avoid underrun. | |
2330 | */ | |
2331 | __le32 mac_aggr_delim; | |
2332 | ||
2333 | /* | |
2334 | * determine whether target is responsible for detecting duplicate | |
2335 | * non-aggregate MPDU and timing out stale fragments. | |
2336 | * | |
2337 | * A-MPDU reordering is always performed on the target. | |
2338 | * | |
2339 | * 0: target responsible for frag timeout and dup checking | |
2340 | * 1: host responsible for frag timeout and dup checking | |
2341 | */ | |
2342 | __le32 rx_skip_defrag_timeout_dup_detection_check; | |
2343 | ||
2344 | /* | |
2345 | * Configuration for VoW : | |
2346 | * No of Video Nodes to be supported | |
2347 | * and Max no of descriptors for each Video link (node). | |
2348 | */ | |
2349 | __le32 vow_config; | |
2350 | ||
2351 | /* Number of msdu descriptors target should use */ | |
2352 | __le32 num_msdu_desc; | |
2353 | ||
2354 | /* | |
2355 | * Max. number of Tx fragments per MSDU | |
2356 | * This parameter controls the max number of Tx fragments per MSDU. | |
2357 | * This is sent by the target as part of the WMI_SERVICE_READY event | |
2358 | * and is overriden by the OS shim as required. | |
2359 | */ | |
2360 | __le32 max_frag_entries; | |
2361 | } __packed; | |
2362 | ||
4a16fbec RM |
2363 | enum wmi_10_2_feature_mask { |
2364 | WMI_10_2_RX_BATCH_MODE = BIT(0), | |
2365 | WMI_10_2_ATF_CONFIG = BIT(1), | |
de0c789b | 2366 | WMI_10_2_COEX_GPIO = BIT(3), |
4a16fbec RM |
2367 | }; |
2368 | ||
24c88f78 MK |
2369 | struct wmi_resource_config_10_2 { |
2370 | struct wmi_resource_config_10x common; | |
2371 | __le32 max_peer_ext_stats; | |
2372 | __le32 smart_ant_cap; /* 0-disable, 1-enable */ | |
2373 | __le32 bk_min_free; | |
2374 | __le32 be_min_free; | |
2375 | __le32 vi_min_free; | |
2376 | __le32 vo_min_free; | |
4a16fbec | 2377 | __le32 feature_mask; |
24c88f78 | 2378 | } __packed; |
12b2b9e3 | 2379 | |
b0399417 RM |
2380 | #define NUM_UNITS_IS_NUM_VDEVS BIT(0) |
2381 | #define NUM_UNITS_IS_NUM_PEERS BIT(1) | |
2382 | #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) | |
b3effe61 | 2383 | |
d1e52a8e RM |
2384 | struct wmi_resource_config_10_4 { |
2385 | /* Number of virtual devices (VAPs) to support */ | |
2386 | __le32 num_vdevs; | |
2387 | ||
2388 | /* Number of peer nodes to support */ | |
2389 | __le32 num_peers; | |
2390 | ||
2391 | /* Number of active peer nodes to support */ | |
2392 | __le32 num_active_peers; | |
2393 | ||
2394 | /* In offload mode, target supports features like WOW, chatter and other | |
2395 | * protocol offloads. In order to support them some functionalities like | |
2396 | * reorder buffering, PN checking need to be done in target. | |
2397 | * This determines maximum number of peers supported by target in | |
2398 | * offload mode. | |
2399 | */ | |
2400 | __le32 num_offload_peers; | |
2401 | ||
2402 | /* Number of reorder buffers available for doing target based reorder | |
2403 | * Rx reorder buffering | |
2404 | */ | |
2405 | __le32 num_offload_reorder_buffs; | |
2406 | ||
2407 | /* Number of keys per peer */ | |
2408 | __le32 num_peer_keys; | |
2409 | ||
2410 | /* Total number of TX/RX data TIDs */ | |
2411 | __le32 num_tids; | |
2412 | ||
2413 | /* Max skid for resolving hash collisions. | |
2414 | * The address search table is sparse, so that if two MAC addresses | |
2415 | * result in the same hash value, the second of these conflicting | |
2416 | * entries can slide to the next index in the address search table, | |
2417 | * and use it, if it is unoccupied. This ast_skid_limit parameter | |
2418 | * specifies the upper bound on how many subsequent indices to search | |
2419 | * over to find an unoccupied space. | |
2420 | */ | |
2421 | __le32 ast_skid_limit; | |
2422 | ||
2423 | /* The nominal chain mask for transmit. | |
2424 | * The chain mask may be modified dynamically, e.g. to operate AP tx | |
2425 | * with a reduced number of chains if no clients are associated. | |
2426 | * This configuration parameter specifies the nominal chain-mask that | |
2427 | * should be used when not operating with a reduced set of tx chains. | |
2428 | */ | |
2429 | __le32 tx_chain_mask; | |
2430 | ||
2431 | /* The nominal chain mask for receive. | |
2432 | * The chain mask may be modified dynamically, e.g. for a client to use | |
2433 | * a reduced number of chains for receive if the traffic to the client | |
2434 | * is low enough that it doesn't require downlink MIMO or antenna | |
2435 | * diversity. This configuration parameter specifies the nominal | |
2436 | * chain-mask that should be used when not operating with a reduced | |
2437 | * set of rx chains. | |
2438 | */ | |
2439 | __le32 rx_chain_mask; | |
2440 | ||
2441 | /* What rx reorder timeout (ms) to use for the AC. | |
2442 | * Each WMM access class (voice, video, best-effort, background) will | |
2443 | * have its own timeout value to dictate how long to wait for missing | |
2444 | * rx MPDUs to arrive before flushing subsequent MPDUs that have already | |
2445 | * been received. This parameter specifies the timeout in milliseconds | |
2446 | * for each class. | |
2447 | */ | |
2448 | __le32 rx_timeout_pri[4]; | |
2449 | ||
2450 | /* What mode the rx should decap packets to. | |
2451 | * MAC can decap to RAW (no decap), native wifi or Ethernet types. | |
2452 | * This setting also determines the default TX behavior, however TX | |
2453 | * behavior can be modified on a per VAP basis during VAP init | |
2454 | */ | |
2455 | __le32 rx_decap_mode; | |
2456 | ||
2457 | __le32 scan_max_pending_req; | |
2458 | ||
2459 | __le32 bmiss_offload_max_vdev; | |
2460 | ||
2461 | __le32 roam_offload_max_vdev; | |
2462 | ||
2463 | __le32 roam_offload_max_ap_profiles; | |
2464 | ||
2465 | /* How many groups to use for mcast->ucast conversion. | |
2466 | * The target's WAL maintains a table to hold information regarding | |
2467 | * which peers belong to a given multicast group, so that if | |
2468 | * multicast->unicast conversion is enabled, the target can convert | |
2469 | * multicast tx frames to a series of unicast tx frames, to each peer | |
2470 | * within the multicast group. This num_mcast_groups configuration | |
2471 | * parameter tells the target how many multicast groups to provide | |
2472 | * storage for within its multicast group membership table. | |
2473 | */ | |
2474 | __le32 num_mcast_groups; | |
2475 | ||
2476 | /* Size to alloc for the mcast membership table. | |
2477 | * This num_mcast_table_elems configuration parameter tells the target | |
2478 | * how many peer elements it needs to provide storage for in its | |
2479 | * multicast group membership table. These multicast group membership | |
2480 | * table elements are shared by the multicast groups stored within | |
2481 | * the table. | |
2482 | */ | |
2483 | __le32 num_mcast_table_elems; | |
2484 | ||
2485 | /* Whether/how to do multicast->unicast conversion. | |
2486 | * This configuration parameter specifies whether the target should | |
2487 | * perform multicast --> unicast conversion on transmit, and if so, | |
2488 | * what to do if it finds no entries in its multicast group membership | |
2489 | * table for the multicast IP address in the tx frame. | |
2490 | * Configuration value: | |
2491 | * 0 -> Do not perform multicast to unicast conversion. | |
2492 | * 1 -> Convert multicast frames to unicast, if the IP multicast address | |
2493 | * from the tx frame is found in the multicast group membership | |
2494 | * table. If the IP multicast address is not found, drop the frame | |
2495 | * 2 -> Convert multicast frames to unicast, if the IP multicast address | |
2496 | * from the tx frame is found in the multicast group membership | |
2497 | * table. If the IP multicast address is not found, transmit the | |
2498 | * frame as multicast. | |
2499 | */ | |
2500 | __le32 mcast2ucast_mode; | |
2501 | ||
2502 | /* How much memory to allocate for a tx PPDU dbg log. | |
2503 | * This parameter controls how much memory the target will allocate to | |
2504 | * store a log of tx PPDU meta-information (how large the PPDU was, | |
2505 | * when it was sent, whether it was successful, etc.) | |
2506 | */ | |
2507 | __le32 tx_dbg_log_size; | |
2508 | ||
2509 | /* How many AST entries to be allocated for WDS */ | |
2510 | __le32 num_wds_entries; | |
2511 | ||
2512 | /* MAC DMA burst size. 0 -default, 1 -256B */ | |
2513 | __le32 dma_burst_size; | |
2514 | ||
2515 | /* Fixed delimiters to be inserted after every MPDU to account for | |
2516 | * interface latency to avoid underrun. | |
2517 | */ | |
2518 | __le32 mac_aggr_delim; | |
2519 | ||
2520 | /* Determine whether target is responsible for detecting duplicate | |
2521 | * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering | |
2522 | * is always performed on the target. | |
2523 | * | |
2524 | * 0: target responsible for frag timeout and dup checking | |
2525 | * 1: host responsible for frag timeout and dup checking | |
2526 | */ | |
2527 | __le32 rx_skip_defrag_timeout_dup_detection_check; | |
2528 | ||
2529 | /* Configuration for VoW : No of Video nodes to be supported and max | |
2530 | * no of descriptors for each video link (node). | |
2531 | */ | |
2532 | __le32 vow_config; | |
2533 | ||
2534 | /* Maximum vdev that could use gtk offload */ | |
2535 | __le32 gtk_offload_max_vdev; | |
2536 | ||
2537 | /* Number of msdu descriptors target should use */ | |
2538 | __le32 num_msdu_desc; | |
2539 | ||
2540 | /* Max number of tx fragments per MSDU. | |
2541 | * This parameter controls the max number of tx fragments per MSDU. | |
2542 | * This will passed by target as part of the WMI_SERVICE_READY event | |
2543 | * and is overridden by the OS shim as required. | |
2544 | */ | |
2545 | __le32 max_frag_entries; | |
2546 | ||
2547 | /* Max number of extended peer stats. | |
2548 | * This parameter controls the max number of peers for which extended | |
2549 | * statistics are supported by target | |
2550 | */ | |
2551 | __le32 max_peer_ext_stats; | |
2552 | ||
2553 | /* Smart antenna capabilities information. | |
2554 | * 1 - Smart antenna is enabled | |
2555 | * 0 - Smart antenna is disabled | |
2556 | * In future this can contain smart antenna specific capabilities. | |
2557 | */ | |
2558 | __le32 smart_ant_cap; | |
2559 | ||
2560 | /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) | |
2561 | * during init. | |
2562 | */ | |
2563 | __le32 bk_minfree; | |
2564 | __le32 be_minfree; | |
2565 | __le32 vi_minfree; | |
2566 | __le32 vo_minfree; | |
2567 | ||
2568 | /* Rx batch mode capability. | |
2569 | * 1 - Rx batch mode enabled | |
2570 | * 0 - Rx batch mode disabled | |
2571 | */ | |
2572 | __le32 rx_batchmode; | |
2573 | ||
2574 | /* Thermal throttling capability. | |
2575 | * 1 - Capable of thermal throttling | |
2576 | * 0 - Not capable of thermal throttling | |
2577 | */ | |
2578 | __le32 tt_support; | |
2579 | ||
2580 | /* ATF configuration. | |
2581 | * 1 - Enable ATF | |
2582 | * 0 - Disable ATF | |
2583 | */ | |
2584 | __le32 atf_config; | |
2585 | ||
2586 | /* Configure padding to manage IP header un-alignment | |
2587 | * 1 - Enable padding | |
2588 | * 0 - Disable padding | |
2589 | */ | |
2590 | __le32 iphdr_pad_config; | |
2591 | ||
2592 | /* qwrap configuration | |
2593 | * 1 - This is qwrap configuration | |
2594 | * 0 - This is not qwrap | |
2595 | */ | |
2596 | __le32 qwrap_config; | |
2597 | } __packed; | |
2598 | ||
5e3dd157 KV |
2599 | /* strucutre describing host memory chunk. */ |
2600 | struct host_memory_chunk { | |
2601 | /* id of the request that is passed up in service ready */ | |
2602 | __le32 req_id; | |
2603 | /* the physical address the memory chunk */ | |
2604 | __le32 ptr; | |
2605 | /* size of the chunk */ | |
2606 | __le32 size; | |
2607 | } __packed; | |
2608 | ||
cf9fca8f MK |
2609 | struct wmi_host_mem_chunks { |
2610 | __le32 count; | |
2611 | /* some fw revisions require at least 1 chunk regardless of count */ | |
2612 | struct host_memory_chunk items[1]; | |
2613 | } __packed; | |
2614 | ||
5e3dd157 KV |
2615 | struct wmi_init_cmd { |
2616 | struct wmi_resource_config resource_config; | |
cf9fca8f | 2617 | struct wmi_host_mem_chunks mem_chunks; |
5e3dd157 KV |
2618 | } __packed; |
2619 | ||
12b2b9e3 BM |
2620 | /* _10x stucture is from 10.X FW API */ |
2621 | struct wmi_init_cmd_10x { | |
2622 | struct wmi_resource_config_10x resource_config; | |
cf9fca8f | 2623 | struct wmi_host_mem_chunks mem_chunks; |
12b2b9e3 BM |
2624 | } __packed; |
2625 | ||
24c88f78 MK |
2626 | struct wmi_init_cmd_10_2 { |
2627 | struct wmi_resource_config_10_2 resource_config; | |
cf9fca8f | 2628 | struct wmi_host_mem_chunks mem_chunks; |
24c88f78 MK |
2629 | } __packed; |
2630 | ||
d1e52a8e RM |
2631 | struct wmi_init_cmd_10_4 { |
2632 | struct wmi_resource_config_10_4 resource_config; | |
2633 | struct wmi_host_mem_chunks mem_chunks; | |
2634 | } __packed; | |
2635 | ||
24c88f78 MK |
2636 | struct wmi_chan_list_entry { |
2637 | __le16 freq; | |
2638 | u8 phy_mode; /* valid for 10.2 only */ | |
2639 | u8 reserved; | |
2640 | } __packed; | |
2641 | ||
5e3dd157 KV |
2642 | /* TLV for channel list */ |
2643 | struct wmi_chan_list { | |
2644 | __le32 tag; /* WMI_CHAN_LIST_TAG */ | |
2645 | __le32 num_chan; | |
24c88f78 | 2646 | struct wmi_chan_list_entry channel_list[0]; |
5e3dd157 KV |
2647 | } __packed; |
2648 | ||
2649 | struct wmi_bssid_list { | |
2650 | __le32 tag; /* WMI_BSSID_LIST_TAG */ | |
2651 | __le32 num_bssid; | |
2652 | struct wmi_mac_addr bssid_list[0]; | |
2653 | } __packed; | |
2654 | ||
2655 | struct wmi_ie_data { | |
2656 | __le32 tag; /* WMI_IE_TAG */ | |
2657 | __le32 ie_len; | |
2658 | u8 ie_data[0]; | |
2659 | } __packed; | |
2660 | ||
2661 | struct wmi_ssid { | |
2662 | __le32 ssid_len; | |
2663 | u8 ssid[32]; | |
2664 | } __packed; | |
2665 | ||
2666 | struct wmi_ssid_list { | |
2667 | __le32 tag; /* WMI_SSID_LIST_TAG */ | |
2668 | __le32 num_ssids; | |
2669 | struct wmi_ssid ssids[0]; | |
2670 | } __packed; | |
2671 | ||
2672 | /* prefix used by scan requestor ids on the host */ | |
2673 | #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 | |
2674 | ||
2675 | /* prefix used by scan request ids generated on the host */ | |
2676 | /* host cycles through the lower 12 bits to generate ids */ | |
2677 | #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 | |
2678 | ||
2679 | #define WLAN_SCAN_PARAMS_MAX_SSID 16 | |
2680 | #define WLAN_SCAN_PARAMS_MAX_BSSID 4 | |
2681 | #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 | |
2682 | ||
dcca0bdb MK |
2683 | /* Values lower than this may be refused by some firmware revisions with a scan |
2684 | * completion with a timedout reason. | |
2685 | */ | |
2686 | #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 | |
2687 | ||
5e3dd157 KV |
2688 | /* Scan priority numbers must be sequential, starting with 0 */ |
2689 | enum wmi_scan_priority { | |
2690 | WMI_SCAN_PRIORITY_VERY_LOW = 0, | |
2691 | WMI_SCAN_PRIORITY_LOW, | |
2692 | WMI_SCAN_PRIORITY_MEDIUM, | |
2693 | WMI_SCAN_PRIORITY_HIGH, | |
2694 | WMI_SCAN_PRIORITY_VERY_HIGH, | |
2695 | WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ | |
2696 | }; | |
2697 | ||
a6aa5da3 | 2698 | struct wmi_start_scan_common { |
5e3dd157 KV |
2699 | /* Scan ID */ |
2700 | __le32 scan_id; | |
2701 | /* Scan requestor ID */ | |
2702 | __le32 scan_req_id; | |
2703 | /* VDEV id(interface) that is requesting scan */ | |
2704 | __le32 vdev_id; | |
2705 | /* Scan Priority, input to scan scheduler */ | |
2706 | __le32 scan_priority; | |
2707 | /* Scan events subscription */ | |
2708 | __le32 notify_scan_events; | |
2709 | /* dwell time in msec on active channels */ | |
2710 | __le32 dwell_time_active; | |
2711 | /* dwell time in msec on passive channels */ | |
2712 | __le32 dwell_time_passive; | |
2713 | /* | |
2714 | * min time in msec on the BSS channel,only valid if atleast one | |
2715 | * VDEV is active | |
2716 | */ | |
2717 | __le32 min_rest_time; | |
2718 | /* | |
2719 | * max rest time in msec on the BSS channel,only valid if at least | |
2720 | * one VDEV is active | |
2721 | */ | |
2722 | /* | |
2723 | * the scanner will rest on the bss channel at least min_rest_time | |
2724 | * after min_rest_time the scanner will start checking for tx/rx | |
2725 | * activity on all VDEVs. if there is no activity the scanner will | |
2726 | * switch to off channel. if there is activity the scanner will let | |
2727 | * the radio on the bss channel until max_rest_time expires.at | |
2728 | * max_rest_time scanner will switch to off channel irrespective of | |
2729 | * activity. activity is determined by the idle_time parameter. | |
2730 | */ | |
2731 | __le32 max_rest_time; | |
2732 | /* | |
2733 | * time before sending next set of probe requests. | |
2734 | * The scanner keeps repeating probe requests transmission with | |
2735 | * period specified by repeat_probe_time. | |
2736 | * The number of probe requests specified depends on the ssid_list | |
2737 | * and bssid_list | |
2738 | */ | |
2739 | __le32 repeat_probe_time; | |
2740 | /* time in msec between 2 consequetive probe requests with in a set. */ | |
2741 | __le32 probe_spacing_time; | |
2742 | /* | |
2743 | * data inactivity time in msec on bss channel that will be used by | |
2744 | * scanner for measuring the inactivity. | |
2745 | */ | |
2746 | __le32 idle_time; | |
2747 | /* maximum time in msec allowed for scan */ | |
2748 | __le32 max_scan_time; | |
2749 | /* | |
2750 | * delay in msec before sending first probe request after switching | |
2751 | * to a channel | |
2752 | */ | |
2753 | __le32 probe_delay; | |
2754 | /* Scan control flags */ | |
2755 | __le32 scan_ctrl_flags; | |
5e3dd157 KV |
2756 | } __packed; |
2757 | ||
a6aa5da3 MK |
2758 | struct wmi_start_scan_tlvs { |
2759 | /* TLV parameters. These includes channel list, ssid list, bssid list, | |
2760 | * extra ies. | |
89b7e766 | 2761 | */ |
a6aa5da3 MK |
2762 | u8 tlvs[0]; |
2763 | } __packed; | |
89b7e766 | 2764 | |
a6aa5da3 MK |
2765 | struct wmi_start_scan_cmd { |
2766 | struct wmi_start_scan_common common; | |
2767 | __le32 burst_duration_ms; | |
2768 | struct wmi_start_scan_tlvs tlvs; | |
2769 | } __packed; | |
89b7e766 | 2770 | |
a6aa5da3 MK |
2771 | /* This is the definition from 10.X firmware branch */ |
2772 | struct wmi_10x_start_scan_cmd { | |
2773 | struct wmi_start_scan_common common; | |
2774 | struct wmi_start_scan_tlvs tlvs; | |
89b7e766 BM |
2775 | } __packed; |
2776 | ||
5e3dd157 KV |
2777 | struct wmi_ssid_arg { |
2778 | int len; | |
2779 | const u8 *ssid; | |
2780 | }; | |
2781 | ||
2782 | struct wmi_bssid_arg { | |
2783 | const u8 *bssid; | |
2784 | }; | |
2785 | ||
2786 | struct wmi_start_scan_arg { | |
2787 | u32 scan_id; | |
2788 | u32 scan_req_id; | |
2789 | u32 vdev_id; | |
2790 | u32 scan_priority; | |
2791 | u32 notify_scan_events; | |
2792 | u32 dwell_time_active; | |
2793 | u32 dwell_time_passive; | |
2794 | u32 min_rest_time; | |
2795 | u32 max_rest_time; | |
2796 | u32 repeat_probe_time; | |
2797 | u32 probe_spacing_time; | |
2798 | u32 idle_time; | |
2799 | u32 max_scan_time; | |
2800 | u32 probe_delay; | |
2801 | u32 scan_ctrl_flags; | |
dbd3f9f3 | 2802 | u32 burst_duration_ms; |
5e3dd157 KV |
2803 | |
2804 | u32 ie_len; | |
2805 | u32 n_channels; | |
2806 | u32 n_ssids; | |
2807 | u32 n_bssids; | |
2808 | ||
2809 | u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; | |
24c88f78 | 2810 | u16 channels[64]; |
5e3dd157 KV |
2811 | struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; |
2812 | struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; | |
2813 | }; | |
2814 | ||
2815 | /* scan control flags */ | |
2816 | ||
2817 | /* passively scan all channels including active channels */ | |
2818 | #define WMI_SCAN_FLAG_PASSIVE 0x1 | |
2819 | /* add wild card ssid probe request even though ssid_list is specified. */ | |
2820 | #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 | |
2821 | /* add cck rates to rates/xrate ie for the generated probe request */ | |
2822 | #define WMI_SCAN_ADD_CCK_RATES 0x4 | |
2823 | /* add ofdm rates to rates/xrate ie for the generated probe request */ | |
2824 | #define WMI_SCAN_ADD_OFDM_RATES 0x8 | |
2825 | /* To enable indication of Chan load and Noise floor to host */ | |
2826 | #define WMI_SCAN_CHAN_STAT_EVENT 0x10 | |
2827 | /* Filter Probe request frames */ | |
2828 | #define WMI_SCAN_FILTER_PROBE_REQ 0x20 | |
2829 | /* When set, DFS channels will not be scanned */ | |
2830 | #define WMI_SCAN_BYPASS_DFS_CHN 0x40 | |
2831 | /* Different FW scan engine may choose to bail out on errors. | |
2832 | * Allow the driver to have influence over that. */ | |
2833 | #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 | |
2834 | ||
2835 | /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ | |
2836 | #define WMI_SCAN_CLASS_MASK 0xFF000000 | |
2837 | ||
5e3dd157 KV |
2838 | enum wmi_stop_scan_type { |
2839 | WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ | |
2840 | WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ | |
2841 | WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ | |
2842 | }; | |
2843 | ||
2844 | struct wmi_stop_scan_cmd { | |
2845 | __le32 scan_req_id; | |
2846 | __le32 scan_id; | |
2847 | __le32 req_type; | |
2848 | __le32 vdev_id; | |
2849 | } __packed; | |
2850 | ||
2851 | struct wmi_stop_scan_arg { | |
2852 | u32 req_id; | |
2853 | enum wmi_stop_scan_type req_type; | |
2854 | union { | |
2855 | u32 scan_id; | |
2856 | u32 vdev_id; | |
2857 | } u; | |
2858 | }; | |
2859 | ||
2860 | struct wmi_scan_chan_list_cmd { | |
2861 | __le32 num_scan_chans; | |
2862 | struct wmi_channel chan_info[0]; | |
2863 | } __packed; | |
2864 | ||
2865 | struct wmi_scan_chan_list_arg { | |
2866 | u32 n_channels; | |
2867 | struct wmi_channel_arg *channels; | |
2868 | }; | |
2869 | ||
2870 | enum wmi_bss_filter { | |
2871 | WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ | |
2872 | WMI_BSS_FILTER_ALL, /* all beacons forwarded */ | |
2873 | WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ | |
2874 | WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ | |
2875 | WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ | |
2876 | WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ | |
2877 | WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ | |
2878 | WMI_BSS_FILTER_LAST_BSS, /* marker only */ | |
2879 | }; | |
2880 | ||
2881 | enum wmi_scan_event_type { | |
2882 | WMI_SCAN_EVENT_STARTED = 0x1, | |
2883 | WMI_SCAN_EVENT_COMPLETED = 0x2, | |
2884 | WMI_SCAN_EVENT_BSS_CHANNEL = 0x4, | |
2885 | WMI_SCAN_EVENT_FOREIGN_CHANNEL = 0x8, | |
2886 | WMI_SCAN_EVENT_DEQUEUED = 0x10, | |
2887 | WMI_SCAN_EVENT_PREEMPTED = 0x20, /* possibly by high-prio scan */ | |
2888 | WMI_SCAN_EVENT_START_FAILED = 0x40, | |
2889 | WMI_SCAN_EVENT_RESTARTED = 0x80, | |
2890 | WMI_SCAN_EVENT_MAX = 0x8000 | |
2891 | }; | |
2892 | ||
2893 | enum wmi_scan_completion_reason { | |
2894 | WMI_SCAN_REASON_COMPLETED, | |
2895 | WMI_SCAN_REASON_CANCELLED, | |
2896 | WMI_SCAN_REASON_PREEMPTED, | |
2897 | WMI_SCAN_REASON_TIMEDOUT, | |
2898 | WMI_SCAN_REASON_MAX, | |
2899 | }; | |
2900 | ||
2901 | struct wmi_scan_event { | |
2902 | __le32 event_type; /* %WMI_SCAN_EVENT_ */ | |
2903 | __le32 reason; /* %WMI_SCAN_REASON_ */ | |
2904 | __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ | |
2905 | __le32 scan_req_id; | |
2906 | __le32 scan_id; | |
2907 | __le32 vdev_id; | |
2908 | } __packed; | |
2909 | ||
2910 | /* | |
2911 | * This defines how much headroom is kept in the | |
2912 | * receive frame between the descriptor and the | |
2913 | * payload, in order for the WMI PHY error and | |
2914 | * management handler to insert header contents. | |
2915 | * | |
2916 | * This is in bytes. | |
2917 | */ | |
2918 | #define WMI_MGMT_RX_HDR_HEADROOM 52 | |
2919 | ||
2920 | /* | |
2921 | * This event will be used for sending scan results | |
2922 | * as well as rx mgmt frames to the host. The rx buffer | |
2923 | * will be sent as part of this WMI event. It would be a | |
2924 | * good idea to pass all the fields in the RX status | |
2925 | * descriptor up to the host. | |
2926 | */ | |
0d9b0438 | 2927 | struct wmi_mgmt_rx_hdr_v1 { |
5e3dd157 KV |
2928 | __le32 channel; |
2929 | __le32 snr; | |
2930 | __le32 rate; | |
2931 | __le32 phy_mode; | |
2932 | __le32 buf_len; | |
2933 | __le32 status; /* %WMI_RX_STATUS_ */ | |
2934 | } __packed; | |
2935 | ||
0d9b0438 MK |
2936 | struct wmi_mgmt_rx_hdr_v2 { |
2937 | struct wmi_mgmt_rx_hdr_v1 v1; | |
2938 | __le32 rssi_ctl[4]; | |
2939 | } __packed; | |
2940 | ||
2941 | struct wmi_mgmt_rx_event_v1 { | |
2942 | struct wmi_mgmt_rx_hdr_v1 hdr; | |
2943 | u8 buf[0]; | |
2944 | } __packed; | |
2945 | ||
2946 | struct wmi_mgmt_rx_event_v2 { | |
2947 | struct wmi_mgmt_rx_hdr_v2 hdr; | |
5e3dd157 KV |
2948 | u8 buf[0]; |
2949 | } __packed; | |
2950 | ||
1c092961 RM |
2951 | struct wmi_10_4_mgmt_rx_hdr { |
2952 | __le32 channel; | |
2953 | __le32 snr; | |
2954 | u8 rssi_ctl[4]; | |
2955 | __le32 rate; | |
2956 | __le32 phy_mode; | |
2957 | __le32 buf_len; | |
2958 | __le32 status; | |
2959 | } __packed; | |
2960 | ||
2961 | struct wmi_10_4_mgmt_rx_event { | |
2962 | struct wmi_10_4_mgmt_rx_hdr hdr; | |
2963 | u8 buf[0]; | |
2964 | } __packed; | |
2965 | ||
5e3dd157 KV |
2966 | #define WMI_RX_STATUS_OK 0x00 |
2967 | #define WMI_RX_STATUS_ERR_CRC 0x01 | |
2968 | #define WMI_RX_STATUS_ERR_DECRYPT 0x08 | |
2969 | #define WMI_RX_STATUS_ERR_MIC 0x10 | |
2970 | #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 | |
2971 | ||
9702c686 JD |
2972 | #define PHY_ERROR_SPECTRAL_SCAN 0x26 |
2973 | #define PHY_ERROR_FALSE_RADAR_EXT 0x24 | |
2974 | #define PHY_ERROR_RADAR 0x05 | |
2975 | ||
2332d0ae | 2976 | struct wmi_phyerr { |
5e3dd157 | 2977 | __le32 tsf_timestamp; |
5e3dd157 KV |
2978 | __le16 freq1; |
2979 | __le16 freq2; | |
5e3dd157 KV |
2980 | u8 rssi_combined; |
2981 | u8 chan_width_mhz; | |
2982 | u8 phy_err_code; | |
2983 | u8 rsvd0; | |
2332d0ae MK |
2984 | __le32 rssi_chains[4]; |
2985 | __le16 nf_chains[4]; | |
5e3dd157 | 2986 | __le32 buf_len; |
2332d0ae | 2987 | u8 buf[0]; |
5e3dd157 KV |
2988 | } __packed; |
2989 | ||
2332d0ae MK |
2990 | struct wmi_phyerr_event { |
2991 | __le32 num_phyerrs; | |
5e3dd157 KV |
2992 | __le32 tsf_l32; |
2993 | __le32 tsf_u32; | |
2332d0ae | 2994 | struct wmi_phyerr phyerrs[0]; |
5e3dd157 KV |
2995 | } __packed; |
2996 | ||
9702c686 JD |
2997 | #define PHYERR_TLV_SIG 0xBB |
2998 | #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB | |
2999 | #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 | |
855aed12 | 3000 | #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 |
9702c686 JD |
3001 | |
3002 | struct phyerr_radar_report { | |
3003 | __le32 reg0; /* RADAR_REPORT_REG0_* */ | |
3004 | __le32 reg1; /* REDAR_REPORT_REG1_* */ | |
3005 | } __packed; | |
3006 | ||
3007 | #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 | |
3008 | #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 | |
3009 | ||
3010 | #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 | |
3011 | #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 | |
3012 | ||
3013 | #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 | |
3014 | #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 | |
3015 | ||
3016 | #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 | |
3017 | #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 | |
3018 | ||
3019 | #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 | |
3020 | #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 | |
3021 | ||
3022 | #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF | |
3023 | #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 | |
3024 | ||
3025 | #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 | |
3026 | #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 | |
3027 | ||
3028 | #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 | |
3029 | #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 | |
3030 | ||
3031 | #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 | |
3032 | #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 | |
3033 | ||
3034 | #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 | |
3035 | #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 | |
3036 | ||
3037 | #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF | |
3038 | #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 | |
3039 | ||
3040 | struct phyerr_fft_report { | |
3041 | __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ | |
3042 | __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ | |
3043 | } __packed; | |
3044 | ||
3045 | #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 | |
3046 | #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 | |
3047 | ||
3048 | #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 | |
3049 | #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 | |
3050 | ||
3051 | #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 | |
3052 | #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 | |
3053 | ||
3054 | #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF | |
3055 | #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 | |
3056 | ||
3057 | #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 | |
3058 | #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 | |
3059 | ||
3060 | #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 | |
3061 | #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 | |
3062 | ||
3063 | #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 | |
3064 | #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 | |
3065 | ||
3066 | #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF | |
3067 | #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 | |
3068 | ||
9702c686 JD |
3069 | struct phyerr_tlv { |
3070 | __le16 len; | |
3071 | u8 tag; | |
3072 | u8 sig; | |
3073 | } __packed; | |
3074 | ||
3075 | #define DFS_RSSI_POSSIBLY_FALSE 50 | |
3076 | #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 | |
3077 | ||
5e3dd157 KV |
3078 | struct wmi_mgmt_tx_hdr { |
3079 | __le32 vdev_id; | |
3080 | struct wmi_mac_addr peer_macaddr; | |
3081 | __le32 tx_rate; | |
3082 | __le32 tx_power; | |
3083 | __le32 buf_len; | |
3084 | } __packed; | |
3085 | ||
3086 | struct wmi_mgmt_tx_cmd { | |
3087 | struct wmi_mgmt_tx_hdr hdr; | |
3088 | u8 buf[0]; | |
3089 | } __packed; | |
3090 | ||
3091 | struct wmi_echo_event { | |
3092 | __le32 value; | |
3093 | } __packed; | |
3094 | ||
3095 | struct wmi_echo_cmd { | |
3096 | __le32 value; | |
3097 | } __packed; | |
3098 | ||
5e3dd157 KV |
3099 | struct wmi_pdev_set_regdomain_cmd { |
3100 | __le32 reg_domain; | |
3101 | __le32 reg_domain_2G; | |
3102 | __le32 reg_domain_5G; | |
3103 | __le32 conformance_test_limit_2G; | |
3104 | __le32 conformance_test_limit_5G; | |
3105 | } __packed; | |
3106 | ||
821af6ae MP |
3107 | enum wmi_dfs_region { |
3108 | /* Uninitialized dfs domain */ | |
3109 | WMI_UNINIT_DFS_DOMAIN = 0, | |
3110 | ||
3111 | /* FCC3 dfs domain */ | |
3112 | WMI_FCC_DFS_DOMAIN = 1, | |
3113 | ||
3114 | /* ETSI dfs domain */ | |
3115 | WMI_ETSI_DFS_DOMAIN = 2, | |
3116 | ||
3117 | /*Japan dfs domain */ | |
3118 | WMI_MKK4_DFS_DOMAIN = 3, | |
3119 | }; | |
3120 | ||
3121 | struct wmi_pdev_set_regdomain_cmd_10x { | |
3122 | __le32 reg_domain; | |
3123 | __le32 reg_domain_2G; | |
3124 | __le32 reg_domain_5G; | |
3125 | __le32 conformance_test_limit_2G; | |
3126 | __le32 conformance_test_limit_5G; | |
3127 | ||
3128 | /* dfs domain from wmi_dfs_region */ | |
3129 | __le32 dfs_domain; | |
3130 | } __packed; | |
3131 | ||
5e3dd157 KV |
3132 | /* Command to set/unset chip in quiet mode */ |
3133 | struct wmi_pdev_set_quiet_cmd { | |
3134 | /* period in TUs */ | |
3135 | __le32 period; | |
3136 | ||
3137 | /* duration in TUs */ | |
3138 | __le32 duration; | |
3139 | ||
3140 | /* offset in TUs */ | |
3141 | __le32 next_start; | |
3142 | ||
3143 | /* enable/disable */ | |
3144 | __le32 enabled; | |
3145 | } __packed; | |
3146 | ||
5e3dd157 KV |
3147 | /* |
3148 | * 802.11g protection mode. | |
3149 | */ | |
3150 | enum ath10k_protmode { | |
3151 | ATH10K_PROT_NONE = 0, /* no protection */ | |
3152 | ATH10K_PROT_CTSONLY = 1, /* CTS to self */ | |
3153 | ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ | |
3154 | }; | |
3155 | ||
e81bd104 MK |
3156 | enum wmi_rtscts_profile { |
3157 | WMI_RTSCTS_FOR_NO_RATESERIES = 0, | |
3158 | WMI_RTSCTS_FOR_SECOND_RATESERIES, | |
3159 | WMI_RTSCTS_ACROSS_SW_RETRIES | |
3160 | }; | |
3161 | ||
3162 | #define WMI_RTSCTS_ENABLED 1 | |
3163 | #define WMI_RTSCTS_SET_MASK 0x0f | |
3164 | #define WMI_RTSCTS_SET_LSB 0 | |
3165 | ||
3166 | #define WMI_RTSCTS_PROFILE_MASK 0xf0 | |
3167 | #define WMI_RTSCTS_PROFILE_LSB 4 | |
3168 | ||
5e3dd157 KV |
3169 | enum wmi_beacon_gen_mode { |
3170 | WMI_BEACON_STAGGERED_MODE = 0, | |
3171 | WMI_BEACON_BURST_MODE = 1 | |
3172 | }; | |
3173 | ||
3174 | enum wmi_csa_event_ies_present_flag { | |
3175 | WMI_CSA_IE_PRESENT = 0x00000001, | |
3176 | WMI_XCSA_IE_PRESENT = 0x00000002, | |
3177 | WMI_WBW_IE_PRESENT = 0x00000004, | |
3178 | WMI_CSWARP_IE_PRESENT = 0x00000008, | |
3179 | }; | |
3180 | ||
3181 | /* wmi CSA receive event from beacon frame */ | |
3182 | struct wmi_csa_event { | |
3183 | __le32 i_fc_dur; | |
3184 | /* Bit 0-15: FC */ | |
3185 | /* Bit 16-31: DUR */ | |
3186 | struct wmi_mac_addr i_addr1; | |
3187 | struct wmi_mac_addr i_addr2; | |
3188 | __le32 csa_ie[2]; | |
3189 | __le32 xcsa_ie[2]; | |
3190 | __le32 wb_ie[2]; | |
3191 | __le32 cswarp_ie; | |
3192 | __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ | |
3193 | } __packed; | |
3194 | ||
3195 | /* the definition of different PDEV parameters */ | |
3196 | #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 | |
3197 | #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 | |
3198 | #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 | |
3199 | ||
226a339b BM |
3200 | struct wmi_pdev_param_map { |
3201 | u32 tx_chain_mask; | |
3202 | u32 rx_chain_mask; | |
3203 | u32 txpower_limit2g; | |
3204 | u32 txpower_limit5g; | |
3205 | u32 txpower_scale; | |
3206 | u32 beacon_gen_mode; | |
3207 | u32 beacon_tx_mode; | |
3208 | u32 resmgr_offchan_mode; | |
3209 | u32 protection_mode; | |
3210 | u32 dynamic_bw; | |
3211 | u32 non_agg_sw_retry_th; | |
3212 | u32 agg_sw_retry_th; | |
3213 | u32 sta_kickout_th; | |
3214 | u32 ac_aggrsize_scaling; | |
3215 | u32 ltr_enable; | |
3216 | u32 ltr_ac_latency_be; | |
3217 | u32 ltr_ac_latency_bk; | |
3218 | u32 ltr_ac_latency_vi; | |
3219 | u32 ltr_ac_latency_vo; | |
3220 | u32 ltr_ac_latency_timeout; | |
3221 | u32 ltr_sleep_override; | |
3222 | u32 ltr_rx_override; | |
3223 | u32 ltr_tx_activity_timeout; | |
3224 | u32 l1ss_enable; | |
3225 | u32 dsleep_enable; | |
3226 | u32 pcielp_txbuf_flush; | |
3227 | u32 pcielp_txbuf_watermark; | |
3228 | u32 pcielp_txbuf_tmo_en; | |
3229 | u32 pcielp_txbuf_tmo_value; | |
3230 | u32 pdev_stats_update_period; | |
3231 | u32 vdev_stats_update_period; | |
3232 | u32 peer_stats_update_period; | |
3233 | u32 bcnflt_stats_update_period; | |
3234 | u32 pmf_qos; | |
3235 | u32 arp_ac_override; | |
226a339b BM |
3236 | u32 dcs; |
3237 | u32 ani_enable; | |
3238 | u32 ani_poll_period; | |
3239 | u32 ani_listen_period; | |
3240 | u32 ani_ofdm_level; | |
3241 | u32 ani_cck_level; | |
3242 | u32 dyntxchain; | |
3243 | u32 proxy_sta; | |
3244 | u32 idle_ps_config; | |
3245 | u32 power_gating_sleep; | |
3246 | u32 fast_channel_reset; | |
3247 | u32 burst_dur; | |
3248 | u32 burst_enable; | |
a7bd3e99 | 3249 | u32 cal_period; |
d86561ff RM |
3250 | u32 aggr_burst; |
3251 | u32 rx_decap_mode; | |
3252 | u32 smart_antenna_default_antenna; | |
3253 | u32 igmpmld_override; | |
3254 | u32 igmpmld_tid; | |
3255 | u32 antenna_gain; | |
3256 | u32 rx_filter; | |
3257 | u32 set_mcast_to_ucast_tid; | |
3258 | u32 proxy_sta_mode; | |
3259 | u32 set_mcast2ucast_mode; | |
3260 | u32 set_mcast2ucast_buffer; | |
3261 | u32 remove_mcast2ucast_buffer; | |
3262 | u32 peer_sta_ps_statechg_enable; | |
3263 | u32 igmpmld_ac_override; | |
3264 | u32 block_interbss; | |
3265 | u32 set_disable_reset_cmdid; | |
3266 | u32 set_msdu_ttl_cmdid; | |
3267 | u32 set_ppdu_duration_cmdid; | |
3268 | u32 txbf_sound_period_cmdid; | |
3269 | u32 set_promisc_mode_cmdid; | |
3270 | u32 set_burst_mode_cmdid; | |
3271 | u32 en_stats; | |
3272 | u32 mu_group_policy; | |
3273 | u32 noise_detection; | |
3274 | u32 noise_threshold; | |
3275 | u32 dpd_enable; | |
3276 | u32 set_mcast_bcast_echo; | |
3277 | u32 atf_strict_sch; | |
3278 | u32 atf_sched_duration; | |
3279 | u32 ant_plzn; | |
3280 | u32 mgmt_retry_limit; | |
3281 | u32 sensitivity_level; | |
3282 | u32 signed_txpower_2g; | |
3283 | u32 signed_txpower_5g; | |
3284 | u32 enable_per_tid_amsdu; | |
3285 | u32 enable_per_tid_ampdu; | |
3286 | u32 cca_threshold; | |
3287 | u32 rts_fixed_rate; | |
3288 | u32 pdev_reset; | |
3289 | u32 wapi_mbssid_offset; | |
3290 | u32 arp_srcaddr; | |
3291 | u32 arp_dstaddr; | |
226a339b BM |
3292 | }; |
3293 | ||
3294 | #define WMI_PDEV_PARAM_UNSUPPORTED 0 | |
3295 | ||
5e3dd157 | 3296 | enum wmi_pdev_param { |
d0e0a552 | 3297 | /* TX chain mask */ |
5e3dd157 | 3298 | WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, |
d0e0a552 | 3299 | /* RX chain mask */ |
5e3dd157 KV |
3300 | WMI_PDEV_PARAM_RX_CHAIN_MASK, |
3301 | /* TX power limit for 2G Radio */ | |
3302 | WMI_PDEV_PARAM_TXPOWER_LIMIT2G, | |
3303 | /* TX power limit for 5G Radio */ | |
3304 | WMI_PDEV_PARAM_TXPOWER_LIMIT5G, | |
3305 | /* TX power scale */ | |
3306 | WMI_PDEV_PARAM_TXPOWER_SCALE, | |
3307 | /* Beacon generation mode . 0: host, 1: target */ | |
3308 | WMI_PDEV_PARAM_BEACON_GEN_MODE, | |
3309 | /* Beacon generation mode . 0: staggered 1: bursted */ | |
3310 | WMI_PDEV_PARAM_BEACON_TX_MODE, | |
3311 | /* | |
3312 | * Resource manager off chan mode . | |
3313 | * 0: turn off off chan mode. 1: turn on offchan mode | |
3314 | */ | |
3315 | WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, | |
3316 | /* | |
3317 | * Protection mode: | |
3318 | * 0: no protection 1:use CTS-to-self 2: use RTS/CTS | |
3319 | */ | |
3320 | WMI_PDEV_PARAM_PROTECTION_MODE, | |
c4dd0d01 MK |
3321 | /* |
3322 | * Dynamic bandwidth - 0: disable, 1: enable | |
3323 | * | |
3324 | * When enabled HW rate control tries different bandwidths when | |
3325 | * retransmitting frames. | |
3326 | */ | |
5e3dd157 KV |
3327 | WMI_PDEV_PARAM_DYNAMIC_BW, |
3328 | /* Non aggregrate/ 11g sw retry threshold.0-disable */ | |
3329 | WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, | |
3330 | /* aggregrate sw retry threshold. 0-disable*/ | |
3331 | WMI_PDEV_PARAM_AGG_SW_RETRY_TH, | |
3332 | /* Station kickout threshold (non of consecutive failures).0-disable */ | |
3333 | WMI_PDEV_PARAM_STA_KICKOUT_TH, | |
3334 | /* Aggerate size scaling configuration per AC */ | |
3335 | WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, | |
3336 | /* LTR enable */ | |
3337 | WMI_PDEV_PARAM_LTR_ENABLE, | |
3338 | /* LTR latency for BE, in us */ | |
3339 | WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, | |
3340 | /* LTR latency for BK, in us */ | |
3341 | WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, | |
3342 | /* LTR latency for VI, in us */ | |
3343 | WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, | |
3344 | /* LTR latency for VO, in us */ | |
3345 | WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, | |
3346 | /* LTR AC latency timeout, in ms */ | |
3347 | WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, | |
3348 | /* LTR platform latency override, in us */ | |
3349 | WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, | |
3350 | /* LTR-RX override, in us */ | |
3351 | WMI_PDEV_PARAM_LTR_RX_OVERRIDE, | |
3352 | /* Tx activity timeout for LTR, in us */ | |
3353 | WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, | |
3354 | /* L1SS state machine enable */ | |
3355 | WMI_PDEV_PARAM_L1SS_ENABLE, | |
3356 | /* Deep sleep state machine enable */ | |
3357 | WMI_PDEV_PARAM_DSLEEP_ENABLE, | |
3358 | /* RX buffering flush enable */ | |
3359 | WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, | |
3360 | /* RX buffering matermark */ | |
3361 | WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, | |
3362 | /* RX buffering timeout enable */ | |
3363 | WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, | |
3364 | /* RX buffering timeout value */ | |
3365 | WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, | |
3366 | /* pdev level stats update period in ms */ | |
3367 | WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, | |
3368 | /* vdev level stats update period in ms */ | |
3369 | WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, | |
3370 | /* peer level stats update period in ms */ | |
3371 | WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, | |
3372 | /* beacon filter status update period */ | |
3373 | WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, | |
3374 | /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ | |
3375 | WMI_PDEV_PARAM_PMF_QOS, | |
3376 | /* Access category on which ARP frames are sent */ | |
3377 | WMI_PDEV_PARAM_ARP_AC_OVERRIDE, | |
3378 | /* DCS configuration */ | |
3379 | WMI_PDEV_PARAM_DCS, | |
3380 | /* Enable/Disable ANI on target */ | |
3381 | WMI_PDEV_PARAM_ANI_ENABLE, | |
3382 | /* configure the ANI polling period */ | |
3383 | WMI_PDEV_PARAM_ANI_POLL_PERIOD, | |
3384 | /* configure the ANI listening period */ | |
3385 | WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, | |
3386 | /* configure OFDM immunity level */ | |
3387 | WMI_PDEV_PARAM_ANI_OFDM_LEVEL, | |
3388 | /* configure CCK immunity level */ | |
3389 | WMI_PDEV_PARAM_ANI_CCK_LEVEL, | |
3390 | /* Enable/Disable CDD for 1x1 STAs in rate control module */ | |
3391 | WMI_PDEV_PARAM_DYNTXCHAIN, | |
3392 | /* Enable/Disable proxy STA */ | |
3393 | WMI_PDEV_PARAM_PROXY_STA, | |
3394 | /* Enable/Disable low power state when all VDEVs are inactive/idle. */ | |
3395 | WMI_PDEV_PARAM_IDLE_PS_CONFIG, | |
3396 | /* Enable/Disable power gating sleep */ | |
3397 | WMI_PDEV_PARAM_POWER_GATING_SLEEP, | |
3398 | }; | |
3399 | ||
226a339b BM |
3400 | enum wmi_10x_pdev_param { |
3401 | /* TX chian mask */ | |
3402 | WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, | |
3403 | /* RX chian mask */ | |
3404 | WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, | |
3405 | /* TX power limit for 2G Radio */ | |
3406 | WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, | |
3407 | /* TX power limit for 5G Radio */ | |
3408 | WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, | |
3409 | /* TX power scale */ | |
3410 | WMI_10X_PDEV_PARAM_TXPOWER_SCALE, | |
3411 | /* Beacon generation mode . 0: host, 1: target */ | |
3412 | WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, | |
3413 | /* Beacon generation mode . 0: staggered 1: bursted */ | |
3414 | WMI_10X_PDEV_PARAM_BEACON_TX_MODE, | |
3415 | /* | |
3416 | * Resource manager off chan mode . | |
3417 | * 0: turn off off chan mode. 1: turn on offchan mode | |
3418 | */ | |
3419 | WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, | |
3420 | /* | |
3421 | * Protection mode: | |
3422 | * 0: no protection 1:use CTS-to-self 2: use RTS/CTS | |
3423 | */ | |
3424 | WMI_10X_PDEV_PARAM_PROTECTION_MODE, | |
3425 | /* Dynamic bandwidth 0: disable 1: enable */ | |
3426 | WMI_10X_PDEV_PARAM_DYNAMIC_BW, | |
3427 | /* Non aggregrate/ 11g sw retry threshold.0-disable */ | |
3428 | WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, | |
3429 | /* aggregrate sw retry threshold. 0-disable*/ | |
3430 | WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, | |
3431 | /* Station kickout threshold (non of consecutive failures).0-disable */ | |
3432 | WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, | |
3433 | /* Aggerate size scaling configuration per AC */ | |
3434 | WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, | |
3435 | /* LTR enable */ | |
3436 | WMI_10X_PDEV_PARAM_LTR_ENABLE, | |
3437 | /* LTR latency for BE, in us */ | |
3438 | WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, | |
3439 | /* LTR latency for BK, in us */ | |
3440 | WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, | |
3441 | /* LTR latency for VI, in us */ | |
3442 | WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, | |
3443 | /* LTR latency for VO, in us */ | |
3444 | WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, | |
3445 | /* LTR AC latency timeout, in ms */ | |
3446 | WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, | |
3447 | /* LTR platform latency override, in us */ | |
3448 | WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, | |
3449 | /* LTR-RX override, in us */ | |
3450 | WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, | |
3451 | /* Tx activity timeout for LTR, in us */ | |
3452 | WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, | |
3453 | /* L1SS state machine enable */ | |
3454 | WMI_10X_PDEV_PARAM_L1SS_ENABLE, | |
3455 | /* Deep sleep state machine enable */ | |
3456 | WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, | |
3457 | /* pdev level stats update period in ms */ | |
3458 | WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, | |
3459 | /* vdev level stats update period in ms */ | |
3460 | WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, | |
3461 | /* peer level stats update period in ms */ | |
3462 | WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, | |
3463 | /* beacon filter status update period */ | |
3464 | WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, | |
3465 | /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ | |
3466 | WMI_10X_PDEV_PARAM_PMF_QOS, | |
3467 | /* Access category on which ARP and DHCP frames are sent */ | |
3468 | WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, | |
3469 | /* DCS configuration */ | |
3470 | WMI_10X_PDEV_PARAM_DCS, | |
3471 | /* Enable/Disable ANI on target */ | |
3472 | WMI_10X_PDEV_PARAM_ANI_ENABLE, | |
3473 | /* configure the ANI polling period */ | |
3474 | WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, | |
3475 | /* configure the ANI listening period */ | |
3476 | WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, | |
3477 | /* configure OFDM immunity level */ | |
3478 | WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, | |
3479 | /* configure CCK immunity level */ | |
3480 | WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, | |
3481 | /* Enable/Disable CDD for 1x1 STAs in rate control module */ | |
3482 | WMI_10X_PDEV_PARAM_DYNTXCHAIN, | |
3483 | /* Enable/Disable Fast channel reset*/ | |
3484 | WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, | |
3485 | /* Set Bursting DUR */ | |
3486 | WMI_10X_PDEV_PARAM_BURST_DUR, | |
3487 | /* Set Bursting Enable*/ | |
3488 | WMI_10X_PDEV_PARAM_BURST_ENABLE, | |
24c88f78 MK |
3489 | |
3490 | /* following are available as of firmware 10.2 */ | |
3491 | WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, | |
3492 | WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, | |
3493 | WMI_10X_PDEV_PARAM_IGMPMLD_TID, | |
3494 | WMI_10X_PDEV_PARAM_ANTENNA_GAIN, | |
3495 | WMI_10X_PDEV_PARAM_RX_DECAP_MODE, | |
3496 | WMI_10X_PDEV_PARAM_RX_FILTER, | |
3497 | WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, | |
3498 | WMI_10X_PDEV_PARAM_PROXY_STA_MODE, | |
3499 | WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, | |
3500 | WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, | |
3501 | WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, | |
b43bf97e PO |
3502 | WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, |
3503 | WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, | |
3504 | WMI_10X_PDEV_PARAM_CAL_PERIOD | |
226a339b BM |
3505 | }; |
3506 | ||
d86561ff RM |
3507 | enum wmi_10_4_pdev_param { |
3508 | WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, | |
3509 | WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, | |
3510 | WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, | |
3511 | WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, | |
3512 | WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, | |
3513 | WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, | |
3514 | WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, | |
3515 | WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, | |
3516 | WMI_10_4_PDEV_PARAM_PROTECTION_MODE, | |
3517 | WMI_10_4_PDEV_PARAM_DYNAMIC_BW, | |
3518 | WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, | |
3519 | WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, | |
3520 | WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, | |
3521 | WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, | |
3522 | WMI_10_4_PDEV_PARAM_LTR_ENABLE, | |
3523 | WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, | |
3524 | WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, | |
3525 | WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, | |
3526 | WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, | |
3527 | WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, | |
3528 | WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, | |
3529 | WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, | |
3530 | WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, | |
3531 | WMI_10_4_PDEV_PARAM_L1SS_ENABLE, | |
3532 | WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, | |
3533 | WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, | |
3534 | WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, | |
3535 | WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, | |
3536 | WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, | |
3537 | WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, | |
3538 | WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, | |
3539 | WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, | |
3540 | WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, | |
3541 | WMI_10_4_PDEV_PARAM_PMF_QOS, | |
3542 | WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, | |
3543 | WMI_10_4_PDEV_PARAM_DCS, | |
3544 | WMI_10_4_PDEV_PARAM_ANI_ENABLE, | |
3545 | WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, | |
3546 | WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, | |
3547 | WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, | |
3548 | WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, | |
3549 | WMI_10_4_PDEV_PARAM_DYNTXCHAIN, | |
3550 | WMI_10_4_PDEV_PARAM_PROXY_STA, | |
3551 | WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, | |
3552 | WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, | |
3553 | WMI_10_4_PDEV_PARAM_AGGR_BURST, | |
3554 | WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, | |
3555 | WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, | |
3556 | WMI_10_4_PDEV_PARAM_BURST_DUR, | |
3557 | WMI_10_4_PDEV_PARAM_BURST_ENABLE, | |
3558 | WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, | |
3559 | WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, | |
3560 | WMI_10_4_PDEV_PARAM_IGMPMLD_TID, | |
3561 | WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, | |
3562 | WMI_10_4_PDEV_PARAM_RX_FILTER, | |
3563 | WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, | |
3564 | WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, | |
3565 | WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, | |
3566 | WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, | |
3567 | WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, | |
3568 | WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, | |
3569 | WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, | |
3570 | WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, | |
3571 | WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, | |
3572 | WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, | |
3573 | WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, | |
3574 | WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, | |
3575 | WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, | |
3576 | WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, | |
3577 | WMI_10_4_PDEV_PARAM_EN_STATS, | |
3578 | WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, | |
3579 | WMI_10_4_PDEV_PARAM_NOISE_DETECTION, | |
3580 | WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, | |
3581 | WMI_10_4_PDEV_PARAM_DPD_ENABLE, | |
3582 | WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, | |
3583 | WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, | |
3584 | WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, | |
3585 | WMI_10_4_PDEV_PARAM_ANT_PLZN, | |
3586 | WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, | |
3587 | WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, | |
3588 | WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, | |
3589 | WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, | |
3590 | WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, | |
3591 | WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, | |
3592 | WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, | |
3593 | WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, | |
3594 | WMI_10_4_PDEV_PARAM_CAL_PERIOD, | |
3595 | WMI_10_4_PDEV_PARAM_PDEV_RESET, | |
3596 | WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, | |
3597 | WMI_10_4_PDEV_PARAM_ARP_SRCADDR, | |
3598 | WMI_10_4_PDEV_PARAM_ARP_DSTADDR, | |
3599 | }; | |
3600 | ||
5e3dd157 KV |
3601 | struct wmi_pdev_set_param_cmd { |
3602 | __le32 param_id; | |
3603 | __le32 param_value; | |
3604 | } __packed; | |
3605 | ||
a7bd3e99 PO |
3606 | /* valid period is 1 ~ 60000ms, unit in millisecond */ |
3607 | #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 | |
3608 | ||
5e3dd157 KV |
3609 | struct wmi_pdev_get_tpc_config_cmd { |
3610 | /* parameter */ | |
3611 | __le32 param; | |
3612 | } __packed; | |
3613 | ||
3614 | #define WMI_TPC_RATE_MAX 160 | |
3615 | #define WMI_TPC_TX_N_CHAIN 4 | |
3616 | ||
3617 | enum wmi_tpc_config_event_flag { | |
3618 | WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, | |
3619 | WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, | |
3620 | WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, | |
3621 | }; | |
3622 | ||
3623 | struct wmi_pdev_tpc_config_event { | |
3624 | __le32 reg_domain; | |
3625 | __le32 chan_freq; | |
3626 | __le32 phy_mode; | |
3627 | __le32 twice_antenna_reduction; | |
3628 | __le32 twice_max_rd_power; | |
3629 | s32 twice_antenna_gain; | |
3630 | __le32 power_limit; | |
3631 | __le32 rate_max; | |
3632 | __le32 num_tx_chain; | |
3633 | __le32 ctl; | |
3634 | __le32 flags; | |
3635 | s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; | |
3636 | s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; | |
3637 | s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; | |
3638 | s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; | |
3639 | u8 rates_array[WMI_TPC_RATE_MAX]; | |
3640 | } __packed; | |
3641 | ||
3642 | /* Transmit power scale factor. */ | |
3643 | enum wmi_tp_scale { | |
3644 | WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ | |
3645 | WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ | |
3646 | WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ | |
3647 | WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ | |
3648 | WMI_TP_SCALE_MIN = 4, /* min, but still on */ | |
3649 | WMI_TP_SCALE_SIZE = 5, /* max num of enum */ | |
3650 | }; | |
3651 | ||
5e3dd157 KV |
3652 | struct wmi_pdev_chanlist_update_event { |
3653 | /* number of channels */ | |
3654 | __le32 num_chan; | |
3655 | /* array of channels */ | |
3656 | struct wmi_channel channel_list[1]; | |
3657 | } __packed; | |
3658 | ||
3659 | #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) | |
3660 | ||
3661 | struct wmi_debug_mesg_event { | |
3662 | /* message buffer, NULL terminated */ | |
3663 | char bufp[WMI_MAX_DEBUG_MESG]; | |
3664 | } __packed; | |
3665 | ||
3666 | enum { | |
3667 | /* P2P device */ | |
3668 | VDEV_SUBTYPE_P2PDEV = 0, | |
3669 | /* P2P client */ | |
3670 | VDEV_SUBTYPE_P2PCLI, | |
3671 | /* P2P GO */ | |
3672 | VDEV_SUBTYPE_P2PGO, | |
3673 | /* BT3.0 HS */ | |
3674 | VDEV_SUBTYPE_BT, | |
3675 | }; | |
3676 | ||
3677 | struct wmi_pdev_set_channel_cmd { | |
3678 | /* idnore power , only use flags , mode and freq */ | |
3679 | struct wmi_channel chan; | |
3680 | } __packed; | |
3681 | ||
90174455 RM |
3682 | struct wmi_pdev_pktlog_enable_cmd { |
3683 | __le32 ev_bitmap; | |
3684 | } __packed; | |
3685 | ||
5e3dd157 KV |
3686 | /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ |
3687 | #define WMI_DSCP_MAP_MAX (64) | |
3688 | struct wmi_pdev_set_dscp_tid_map_cmd { | |
3689 | /* map indicating DSCP to TID conversion */ | |
3690 | __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; | |
3691 | } __packed; | |
3692 | ||
3693 | enum mcast_bcast_rate_id { | |
3694 | WMI_SET_MCAST_RATE, | |
3695 | WMI_SET_BCAST_RATE | |
3696 | }; | |
3697 | ||
3698 | struct mcast_bcast_rate { | |
3699 | enum mcast_bcast_rate_id rate_id; | |
3700 | __le32 rate; | |
3701 | } __packed; | |
3702 | ||
3703 | struct wmi_wmm_params { | |
3704 | __le32 cwmin; | |
3705 | __le32 cwmax; | |
3706 | __le32 aifs; | |
3707 | __le32 txop; | |
3708 | __le32 acm; | |
3709 | __le32 no_ack; | |
3710 | } __packed; | |
3711 | ||
3712 | struct wmi_pdev_set_wmm_params { | |
3713 | struct wmi_wmm_params ac_be; | |
3714 | struct wmi_wmm_params ac_bk; | |
3715 | struct wmi_wmm_params ac_vi; | |
3716 | struct wmi_wmm_params ac_vo; | |
3717 | } __packed; | |
3718 | ||
3719 | struct wmi_wmm_params_arg { | |
3720 | u32 cwmin; | |
3721 | u32 cwmax; | |
3722 | u32 aifs; | |
3723 | u32 txop; | |
3724 | u32 acm; | |
3725 | u32 no_ack; | |
3726 | }; | |
3727 | ||
5e752e42 | 3728 | struct wmi_wmm_params_all_arg { |
5e3dd157 KV |
3729 | struct wmi_wmm_params_arg ac_be; |
3730 | struct wmi_wmm_params_arg ac_bk; | |
3731 | struct wmi_wmm_params_arg ac_vi; | |
3732 | struct wmi_wmm_params_arg ac_vo; | |
3733 | }; | |
3734 | ||
b91251fb | 3735 | struct wmi_pdev_stats_tx { |
5e3dd157 KV |
3736 | /* Num HTT cookies queued to dispatch list */ |
3737 | __le32 comp_queued; | |
3738 | ||
3739 | /* Num HTT cookies dispatched */ | |
3740 | __le32 comp_delivered; | |
3741 | ||
3742 | /* Num MSDU queued to WAL */ | |
3743 | __le32 msdu_enqued; | |
3744 | ||
3745 | /* Num MPDU queue to WAL */ | |
3746 | __le32 mpdu_enqued; | |
3747 | ||
3748 | /* Num MSDUs dropped by WMM limit */ | |
3749 | __le32 wmm_drop; | |
3750 | ||
3751 | /* Num Local frames queued */ | |
3752 | __le32 local_enqued; | |
3753 | ||
3754 | /* Num Local frames done */ | |
3755 | __le32 local_freed; | |
3756 | ||
3757 | /* Num queued to HW */ | |
3758 | __le32 hw_queued; | |
3759 | ||
3760 | /* Num PPDU reaped from HW */ | |
3761 | __le32 hw_reaped; | |
3762 | ||
3763 | /* Num underruns */ | |
3764 | __le32 underrun; | |
3765 | ||
3766 | /* Num PPDUs cleaned up in TX abort */ | |
3767 | __le32 tx_abort; | |
3768 | ||
3769 | /* Num MPDUs requed by SW */ | |
3770 | __le32 mpdus_requed; | |
3771 | ||
3772 | /* excessive retries */ | |
3773 | __le32 tx_ko; | |
3774 | ||
3775 | /* data hw rate code */ | |
3776 | __le32 data_rc; | |
3777 | ||
3778 | /* Scheduler self triggers */ | |
3779 | __le32 self_triggers; | |
3780 | ||
3781 | /* frames dropped due to excessive sw retries */ | |
3782 | __le32 sw_retry_failure; | |
3783 | ||
3784 | /* illegal rate phy errors */ | |
3785 | __le32 illgl_rate_phy_err; | |
3786 | ||
3787 | /* wal pdev continous xretry */ | |
3788 | __le32 pdev_cont_xretry; | |
3789 | ||
3790 | /* wal pdev continous xretry */ | |
3791 | __le32 pdev_tx_timeout; | |
3792 | ||
3793 | /* wal pdev resets */ | |
3794 | __le32 pdev_resets; | |
3795 | ||
34d714e0 BM |
3796 | /* frames dropped due to non-availability of stateless TIDs */ |
3797 | __le32 stateless_tid_alloc_failure; | |
3798 | ||
5e3dd157 KV |
3799 | __le32 phy_underrun; |
3800 | ||
3801 | /* MPDU is more than txop limit */ | |
3802 | __le32 txop_ovf; | |
3803 | } __packed; | |
3804 | ||
b91251fb | 3805 | struct wmi_pdev_stats_rx { |
5e3dd157 KV |
3806 | /* Cnts any change in ring routing mid-ppdu */ |
3807 | __le32 mid_ppdu_route_change; | |
3808 | ||
3809 | /* Total number of statuses processed */ | |
3810 | __le32 status_rcvd; | |
3811 | ||
3812 | /* Extra frags on rings 0-3 */ | |
3813 | __le32 r0_frags; | |
3814 | __le32 r1_frags; | |
3815 | __le32 r2_frags; | |
3816 | __le32 r3_frags; | |
3817 | ||
3818 | /* MSDUs / MPDUs delivered to HTT */ | |
3819 | __le32 htt_msdus; | |
3820 | __le32 htt_mpdus; | |
3821 | ||
3822 | /* MSDUs / MPDUs delivered to local stack */ | |
3823 | __le32 loc_msdus; | |
3824 | __le32 loc_mpdus; | |
3825 | ||
3826 | /* AMSDUs that have more MSDUs than the status ring size */ | |
3827 | __le32 oversize_amsdu; | |
3828 | ||
3829 | /* Number of PHY errors */ | |
3830 | __le32 phy_errs; | |
3831 | ||
3832 | /* Number of PHY errors drops */ | |
3833 | __le32 phy_err_drop; | |
3834 | ||
3835 | /* Number of mpdu errors - FCS, MIC, ENC etc. */ | |
3836 | __le32 mpdu_errs; | |
3837 | } __packed; | |
3838 | ||
b91251fb | 3839 | struct wmi_pdev_stats_peer { |
5e3dd157 KV |
3840 | /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ |
3841 | __le32 dummy; | |
3842 | } __packed; | |
3843 | ||
5e3dd157 | 3844 | enum wmi_stats_id { |
eed55411 MK |
3845 | WMI_STAT_PEER = BIT(0), |
3846 | WMI_STAT_AP = BIT(1), | |
3847 | WMI_STAT_PDEV = BIT(2), | |
3848 | WMI_STAT_VDEV = BIT(3), | |
3849 | WMI_STAT_BCNFLT = BIT(4), | |
3850 | WMI_STAT_VDEV_RATE = BIT(5), | |
5e3dd157 KV |
3851 | }; |
3852 | ||
db9cdda6 BG |
3853 | struct wlan_inst_rssi_args { |
3854 | __le16 cfg_retry_count; | |
3855 | __le16 retry_count; | |
3856 | }; | |
3857 | ||
5e3dd157 KV |
3858 | struct wmi_request_stats_cmd { |
3859 | __le32 stats_id; | |
3860 | ||
db9cdda6 BG |
3861 | __le32 vdev_id; |
3862 | ||
3863 | /* peer MAC address */ | |
3864 | struct wmi_mac_addr peer_macaddr; | |
3865 | ||
3866 | /* Instantaneous RSSI arguments */ | |
3867 | struct wlan_inst_rssi_args inst_rssi_args; | |
5e3dd157 KV |
3868 | } __packed; |
3869 | ||
3870 | /* Suspend option */ | |
3871 | enum { | |
3872 | /* suspend */ | |
3873 | WMI_PDEV_SUSPEND, | |
3874 | ||
3875 | /* suspend and disable all interrupts */ | |
3876 | WMI_PDEV_SUSPEND_AND_DISABLE_INTR, | |
3877 | }; | |
3878 | ||
3879 | struct wmi_pdev_suspend_cmd { | |
3880 | /* suspend option sent to target */ | |
3881 | __le32 suspend_opt; | |
3882 | } __packed; | |
3883 | ||
3884 | struct wmi_stats_event { | |
eed55411 | 3885 | __le32 stats_id; /* WMI_STAT_ */ |
5e3dd157 KV |
3886 | /* |
3887 | * number of pdev stats event structures | |
3888 | * (wmi_pdev_stats) 0 or 1 | |
3889 | */ | |
3890 | __le32 num_pdev_stats; | |
3891 | /* | |
3892 | * number of vdev stats event structures | |
3893 | * (wmi_vdev_stats) 0 or max vdevs | |
3894 | */ | |
3895 | __le32 num_vdev_stats; | |
3896 | /* | |
3897 | * number of peer stats event structures | |
3898 | * (wmi_peer_stats) 0 or max peers | |
3899 | */ | |
3900 | __le32 num_peer_stats; | |
3901 | __le32 num_bcnflt_stats; | |
3902 | /* | |
3903 | * followed by | |
3904 | * num_pdev_stats * size of(struct wmi_pdev_stats) | |
3905 | * num_vdev_stats * size of(struct wmi_vdev_stats) | |
3906 | * num_peer_stats * size of(struct wmi_peer_stats) | |
3907 | * | |
3908 | * By having a zero sized array, the pointer to data area | |
3909 | * becomes available without increasing the struct size | |
3910 | */ | |
3911 | u8 data[0]; | |
3912 | } __packed; | |
3913 | ||
20de2229 MK |
3914 | struct wmi_10_2_stats_event { |
3915 | __le32 stats_id; /* %WMI_REQUEST_ */ | |
3916 | __le32 num_pdev_stats; | |
3917 | __le32 num_pdev_ext_stats; | |
3918 | __le32 num_vdev_stats; | |
3919 | __le32 num_peer_stats; | |
3920 | __le32 num_bcnflt_stats; | |
3921 | u8 data[0]; | |
3922 | } __packed; | |
3923 | ||
5e3dd157 KV |
3924 | /* |
3925 | * PDEV statistics | |
3926 | * TODO: add all PDEV stats here | |
3927 | */ | |
b91251fb MK |
3928 | struct wmi_pdev_stats_base { |
3929 | __le32 chan_nf; | |
3930 | __le32 tx_frame_count; | |
3931 | __le32 rx_frame_count; | |
3932 | __le32 rx_clear_count; | |
3933 | __le32 cycle_count; | |
3934 | __le32 phy_err_count; | |
3935 | __le32 chan_tx_pwr; | |
3936 | } __packed; | |
3937 | ||
d15fb520 | 3938 | struct wmi_pdev_stats { |
b91251fb MK |
3939 | struct wmi_pdev_stats_base base; |
3940 | struct wmi_pdev_stats_tx tx; | |
3941 | struct wmi_pdev_stats_rx rx; | |
3942 | struct wmi_pdev_stats_peer peer; | |
5e3dd157 KV |
3943 | } __packed; |
3944 | ||
b91251fb | 3945 | struct wmi_pdev_stats_extra { |
52e346d1 CYY |
3946 | __le32 ack_rx_bad; |
3947 | __le32 rts_bad; | |
3948 | __le32 rts_good; | |
3949 | __le32 fcs_bad; | |
3950 | __le32 no_beacons; | |
3951 | __le32 mib_int_count; | |
5e3dd157 KV |
3952 | } __packed; |
3953 | ||
b91251fb MK |
3954 | struct wmi_10x_pdev_stats { |
3955 | struct wmi_pdev_stats_base base; | |
3956 | struct wmi_pdev_stats_tx tx; | |
3957 | struct wmi_pdev_stats_rx rx; | |
3958 | struct wmi_pdev_stats_peer peer; | |
3959 | struct wmi_pdev_stats_extra extra; | |
3960 | } __packed; | |
3961 | ||
20de2229 MK |
3962 | struct wmi_pdev_stats_mem { |
3963 | __le32 dram_free; | |
3964 | __le32 iram_free; | |
3965 | } __packed; | |
3966 | ||
3967 | struct wmi_10_2_pdev_stats { | |
3968 | struct wmi_pdev_stats_base base; | |
3969 | struct wmi_pdev_stats_tx tx; | |
3970 | __le32 mc_drop; | |
3971 | struct wmi_pdev_stats_rx rx; | |
3972 | __le32 pdev_rx_timeout; | |
3973 | struct wmi_pdev_stats_mem mem; | |
3974 | struct wmi_pdev_stats_peer peer; | |
3975 | struct wmi_pdev_stats_extra extra; | |
3976 | } __packed; | |
3977 | ||
5e3dd157 KV |
3978 | /* |
3979 | * VDEV statistics | |
3980 | * TODO: add all VDEV stats here | |
3981 | */ | |
3982 | struct wmi_vdev_stats { | |
3983 | __le32 vdev_id; | |
3984 | } __packed; | |
3985 | ||
3986 | /* | |
3987 | * peer statistics. | |
3988 | * TODO: add more stats | |
3989 | */ | |
d15fb520 | 3990 | struct wmi_peer_stats { |
5e3dd157 KV |
3991 | struct wmi_mac_addr peer_macaddr; |
3992 | __le32 peer_rssi; | |
3993 | __le32 peer_tx_rate; | |
3994 | } __packed; | |
3995 | ||
d15fb520 MK |
3996 | struct wmi_10x_peer_stats { |
3997 | struct wmi_peer_stats old; | |
23c3aae4 | 3998 | __le32 peer_rx_rate; |
5e3dd157 KV |
3999 | } __packed; |
4000 | ||
20de2229 MK |
4001 | struct wmi_10_2_peer_stats { |
4002 | struct wmi_peer_stats old; | |
4003 | __le32 peer_rx_rate; | |
4004 | __le32 current_per; | |
4005 | __le32 retries; | |
4006 | __le32 tx_rate_count; | |
4007 | __le32 max_4ms_frame_len; | |
4008 | __le32 total_sub_frames; | |
4009 | __le32 tx_bytes; | |
4010 | __le32 num_pkt_loss_overflow[4]; | |
4011 | __le32 num_pkt_loss_excess_retry[4]; | |
4012 | } __packed; | |
4013 | ||
4014 | struct wmi_10_2_4_peer_stats { | |
4015 | struct wmi_10_2_peer_stats common; | |
4016 | __le32 unknown_value; /* FIXME: what is this word? */ | |
4017 | } __packed; | |
4018 | ||
4019 | struct wmi_10_2_pdev_ext_stats { | |
4020 | __le32 rx_rssi_comb; | |
4021 | __le32 rx_rssi[4]; | |
4022 | __le32 rx_mcs[10]; | |
4023 | __le32 tx_mcs[10]; | |
4024 | __le32 ack_rssi; | |
4025 | } __packed; | |
4026 | ||
5e3dd157 KV |
4027 | struct wmi_vdev_create_cmd { |
4028 | __le32 vdev_id; | |
4029 | __le32 vdev_type; | |
4030 | __le32 vdev_subtype; | |
4031 | struct wmi_mac_addr vdev_macaddr; | |
4032 | } __packed; | |
4033 | ||
4034 | enum wmi_vdev_type { | |
4035 | WMI_VDEV_TYPE_AP = 1, | |
4036 | WMI_VDEV_TYPE_STA = 2, | |
4037 | WMI_VDEV_TYPE_IBSS = 3, | |
4038 | WMI_VDEV_TYPE_MONITOR = 4, | |
4039 | }; | |
4040 | ||
4041 | enum wmi_vdev_subtype { | |
4042 | WMI_VDEV_SUBTYPE_NONE = 0, | |
4043 | WMI_VDEV_SUBTYPE_P2P_DEVICE = 1, | |
4044 | WMI_VDEV_SUBTYPE_P2P_CLIENT = 2, | |
4045 | WMI_VDEV_SUBTYPE_P2P_GO = 3, | |
4046 | }; | |
4047 | ||
4048 | /* values for vdev_subtype */ | |
4049 | ||
4050 | /* values for vdev_start_request flags */ | |
4051 | /* | |
4052 | * Indicates that AP VDEV uses hidden ssid. only valid for | |
4053 | * AP/GO */ | |
4054 | #define WMI_VDEV_START_HIDDEN_SSID (1<<0) | |
4055 | /* | |
4056 | * Indicates if robust management frame/management frame | |
4057 | * protection is enabled. For GO/AP vdevs, it indicates that | |
4058 | * it may support station/client associations with RMF enabled. | |
4059 | * For STA/client vdevs, it indicates that sta will | |
4060 | * associate with AP with RMF enabled. */ | |
4061 | #define WMI_VDEV_START_PMF_ENABLED (1<<1) | |
4062 | ||
4063 | struct wmi_p2p_noa_descriptor { | |
4064 | __le32 type_count; /* 255: continuous schedule, 0: reserved */ | |
4065 | __le32 duration; /* Absent period duration in micro seconds */ | |
4066 | __le32 interval; /* Absent period interval in micro seconds */ | |
4067 | __le32 start_time; /* 32 bit tsf time when in starts */ | |
4068 | } __packed; | |
4069 | ||
4070 | struct wmi_vdev_start_request_cmd { | |
4071 | /* WMI channel */ | |
4072 | struct wmi_channel chan; | |
4073 | /* unique id identifying the VDEV, generated by the caller */ | |
4074 | __le32 vdev_id; | |
4075 | /* requestor id identifying the caller module */ | |
4076 | __le32 requestor_id; | |
4077 | /* beacon interval from received beacon */ | |
4078 | __le32 beacon_interval; | |
4079 | /* DTIM Period from the received beacon */ | |
4080 | __le32 dtim_period; | |
4081 | /* Flags */ | |
4082 | __le32 flags; | |
4083 | /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ | |
4084 | struct wmi_ssid ssid; | |
4085 | /* beacon/probe reponse xmit rate. Applicable for SoftAP. */ | |
4086 | __le32 bcn_tx_rate; | |
4087 | /* beacon/probe reponse xmit power. Applicable for SoftAP. */ | |
4088 | __le32 bcn_tx_power; | |
4089 | /* number of p2p NOA descriptor(s) from scan entry */ | |
4090 | __le32 num_noa_descriptors; | |
4091 | /* | |
4092 | * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. | |
4093 | * During CAC, Our HW shouldn't ack ditected frames | |
4094 | */ | |
4095 | __le32 disable_hw_ack; | |
4096 | /* actual p2p NOA descriptor from scan entry */ | |
4097 | struct wmi_p2p_noa_descriptor noa_descriptors[2]; | |
4098 | } __packed; | |
4099 | ||
4100 | struct wmi_vdev_restart_request_cmd { | |
4101 | struct wmi_vdev_start_request_cmd vdev_start_request_cmd; | |
4102 | } __packed; | |
4103 | ||
4104 | struct wmi_vdev_start_request_arg { | |
4105 | u32 vdev_id; | |
4106 | struct wmi_channel_arg channel; | |
4107 | u32 bcn_intval; | |
4108 | u32 dtim_period; | |
4109 | u8 *ssid; | |
4110 | u32 ssid_len; | |
4111 | u32 bcn_tx_rate; | |
4112 | u32 bcn_tx_power; | |
4113 | bool disable_hw_ack; | |
4114 | bool hidden_ssid; | |
4115 | bool pmf_enabled; | |
4116 | }; | |
4117 | ||
4118 | struct wmi_vdev_delete_cmd { | |
4119 | /* unique id identifying the VDEV, generated by the caller */ | |
4120 | __le32 vdev_id; | |
4121 | } __packed; | |
4122 | ||
4123 | struct wmi_vdev_up_cmd { | |
4124 | __le32 vdev_id; | |
4125 | __le32 vdev_assoc_id; | |
4126 | struct wmi_mac_addr vdev_bssid; | |
4127 | } __packed; | |
4128 | ||
4129 | struct wmi_vdev_stop_cmd { | |
4130 | __le32 vdev_id; | |
4131 | } __packed; | |
4132 | ||
4133 | struct wmi_vdev_down_cmd { | |
4134 | __le32 vdev_id; | |
4135 | } __packed; | |
4136 | ||
4137 | struct wmi_vdev_standby_response_cmd { | |
4138 | /* unique id identifying the VDEV, generated by the caller */ | |
4139 | __le32 vdev_id; | |
4140 | } __packed; | |
4141 | ||
4142 | struct wmi_vdev_resume_response_cmd { | |
4143 | /* unique id identifying the VDEV, generated by the caller */ | |
4144 | __le32 vdev_id; | |
4145 | } __packed; | |
4146 | ||
4147 | struct wmi_vdev_set_param_cmd { | |
4148 | __le32 vdev_id; | |
4149 | __le32 param_id; | |
4150 | __le32 param_value; | |
4151 | } __packed; | |
4152 | ||
4153 | #define WMI_MAX_KEY_INDEX 3 | |
4154 | #define WMI_MAX_KEY_LEN 32 | |
4155 | ||
4156 | #define WMI_KEY_PAIRWISE 0x00 | |
4157 | #define WMI_KEY_GROUP 0x01 | |
4158 | #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ | |
4159 | ||
4160 | struct wmi_key_seq_counter { | |
4161 | __le32 key_seq_counter_l; | |
4162 | __le32 key_seq_counter_h; | |
4163 | } __packed; | |
4164 | ||
4165 | #define WMI_CIPHER_NONE 0x0 /* clear key */ | |
4166 | #define WMI_CIPHER_WEP 0x1 | |
4167 | #define WMI_CIPHER_TKIP 0x2 | |
4168 | #define WMI_CIPHER_AES_OCB 0x3 | |
4169 | #define WMI_CIPHER_AES_CCM 0x4 | |
4170 | #define WMI_CIPHER_WAPI 0x5 | |
4171 | #define WMI_CIPHER_CKIP 0x6 | |
4172 | #define WMI_CIPHER_AES_CMAC 0x7 | |
4173 | ||
4174 | struct wmi_vdev_install_key_cmd { | |
4175 | __le32 vdev_id; | |
4176 | struct wmi_mac_addr peer_macaddr; | |
4177 | __le32 key_idx; | |
4178 | __le32 key_flags; | |
4179 | __le32 key_cipher; /* %WMI_CIPHER_ */ | |
4180 | struct wmi_key_seq_counter key_rsc_counter; | |
4181 | struct wmi_key_seq_counter key_global_rsc_counter; | |
4182 | struct wmi_key_seq_counter key_tsc_counter; | |
4183 | u8 wpi_key_rsc_counter[16]; | |
4184 | u8 wpi_key_tsc_counter[16]; | |
4185 | __le32 key_len; | |
4186 | __le32 key_txmic_len; | |
4187 | __le32 key_rxmic_len; | |
4188 | ||
4189 | /* contains key followed by tx mic followed by rx mic */ | |
4190 | u8 key_data[0]; | |
4191 | } __packed; | |
4192 | ||
4193 | struct wmi_vdev_install_key_arg { | |
4194 | u32 vdev_id; | |
4195 | const u8 *macaddr; | |
4196 | u32 key_idx; | |
4197 | u32 key_flags; | |
4198 | u32 key_cipher; | |
4199 | u32 key_len; | |
4200 | u32 key_txmic_len; | |
4201 | u32 key_rxmic_len; | |
4202 | const void *key_data; | |
4203 | }; | |
4204 | ||
51ab1a0a JD |
4205 | /* |
4206 | * vdev fixed rate format: | |
4207 | * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ | |
4208 | * - nss - b5:b4 - ss number (0 mean 1ss) | |
4209 | * - rate_mcs - b3:b0 - as below | |
4210 | * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, | |
4211 | * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) | |
4212 | * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, | |
4213 | * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps | |
4214 | * HT/VHT: MCS index | |
4215 | */ | |
4216 | ||
5e3dd157 KV |
4217 | /* Preamble types to be used with VDEV fixed rate configuration */ |
4218 | enum wmi_rate_preamble { | |
4219 | WMI_RATE_PREAMBLE_OFDM, | |
4220 | WMI_RATE_PREAMBLE_CCK, | |
4221 | WMI_RATE_PREAMBLE_HT, | |
4222 | WMI_RATE_PREAMBLE_VHT, | |
4223 | }; | |
4224 | ||
4225 | /* Value to disable fixed rate setting */ | |
4226 | #define WMI_FIXED_RATE_NONE (0xff) | |
4227 | ||
6d1506e7 BM |
4228 | struct wmi_vdev_param_map { |
4229 | u32 rts_threshold; | |
4230 | u32 fragmentation_threshold; | |
4231 | u32 beacon_interval; | |
4232 | u32 listen_interval; | |
4233 | u32 multicast_rate; | |
4234 | u32 mgmt_tx_rate; | |
4235 | u32 slot_time; | |
4236 | u32 preamble; | |
4237 | u32 swba_time; | |
4238 | u32 wmi_vdev_stats_update_period; | |
4239 | u32 wmi_vdev_pwrsave_ageout_time; | |
4240 | u32 wmi_vdev_host_swba_interval; | |
4241 | u32 dtim_period; | |
4242 | u32 wmi_vdev_oc_scheduler_air_time_limit; | |
4243 | u32 wds; | |
4244 | u32 atim_window; | |
4245 | u32 bmiss_count_max; | |
4246 | u32 bmiss_first_bcnt; | |
4247 | u32 bmiss_final_bcnt; | |
4248 | u32 feature_wmm; | |
4249 | u32 chwidth; | |
4250 | u32 chextoffset; | |
4251 | u32 disable_htprotection; | |
4252 | u32 sta_quickkickout; | |
4253 | u32 mgmt_rate; | |
4254 | u32 protection_mode; | |
4255 | u32 fixed_rate; | |
4256 | u32 sgi; | |
4257 | u32 ldpc; | |
4258 | u32 tx_stbc; | |
4259 | u32 rx_stbc; | |
4260 | u32 intra_bss_fwd; | |
4261 | u32 def_keyid; | |
4262 | u32 nss; | |
4263 | u32 bcast_data_rate; | |
4264 | u32 mcast_data_rate; | |
4265 | u32 mcast_indicate; | |
4266 | u32 dhcp_indicate; | |
4267 | u32 unknown_dest_indicate; | |
4268 | u32 ap_keepalive_min_idle_inactive_time_secs; | |
4269 | u32 ap_keepalive_max_idle_inactive_time_secs; | |
4270 | u32 ap_keepalive_max_unresponsive_time_secs; | |
4271 | u32 ap_enable_nawds; | |
4272 | u32 mcast2ucast_set; | |
4273 | u32 enable_rtscts; | |
4274 | u32 txbf; | |
4275 | u32 packet_powersave; | |
4276 | u32 drop_unencry; | |
4277 | u32 tx_encap_type; | |
4278 | u32 ap_detect_out_of_sync_sleeping_sta_time_secs; | |
93841a15 RM |
4279 | u32 rc_num_retries; |
4280 | u32 cabq_maxdur; | |
4281 | u32 mfptest_set; | |
4282 | u32 rts_fixed_rate; | |
4283 | u32 vht_sgimask; | |
4284 | u32 vht80_ratemask; | |
4285 | u32 early_rx_adjust_enable; | |
4286 | u32 early_rx_tgt_bmiss_num; | |
4287 | u32 early_rx_bmiss_sample_cycle; | |
4288 | u32 early_rx_slop_step; | |
4289 | u32 early_rx_init_slop; | |
4290 | u32 early_rx_adjust_pause; | |
4291 | u32 proxy_sta; | |
4292 | u32 meru_vc; | |
4293 | u32 rx_decap_type; | |
4294 | u32 bw_nss_ratemask; | |
6d1506e7 BM |
4295 | }; |
4296 | ||
4297 | #define WMI_VDEV_PARAM_UNSUPPORTED 0 | |
4298 | ||
5e3dd157 KV |
4299 | /* the definition of different VDEV parameters */ |
4300 | enum wmi_vdev_param { | |
4301 | /* RTS Threshold */ | |
4302 | WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, | |
4303 | /* Fragmentation threshold */ | |
4304 | WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, | |
4305 | /* beacon interval in TUs */ | |
4306 | WMI_VDEV_PARAM_BEACON_INTERVAL, | |
4307 | /* Listen interval in TUs */ | |
4308 | WMI_VDEV_PARAM_LISTEN_INTERVAL, | |
4309 | /* muticast rate in Mbps */ | |
4310 | WMI_VDEV_PARAM_MULTICAST_RATE, | |
4311 | /* management frame rate in Mbps */ | |
4312 | WMI_VDEV_PARAM_MGMT_TX_RATE, | |
4313 | /* slot time (long vs short) */ | |
4314 | WMI_VDEV_PARAM_SLOT_TIME, | |
4315 | /* preamble (long vs short) */ | |
4316 | WMI_VDEV_PARAM_PREAMBLE, | |
4317 | /* SWBA time (time before tbtt in msec) */ | |
4318 | WMI_VDEV_PARAM_SWBA_TIME, | |
4319 | /* time period for updating VDEV stats */ | |
4320 | WMI_VDEV_STATS_UPDATE_PERIOD, | |
4321 | /* age out time in msec for frames queued for station in power save */ | |
4322 | WMI_VDEV_PWRSAVE_AGEOUT_TIME, | |
4323 | /* | |
4324 | * Host SWBA interval (time in msec before tbtt for SWBA event | |
4325 | * generation). | |
4326 | */ | |
4327 | WMI_VDEV_HOST_SWBA_INTERVAL, | |
4328 | /* DTIM period (specified in units of num beacon intervals) */ | |
4329 | WMI_VDEV_PARAM_DTIM_PERIOD, | |
4330 | /* | |
4331 | * scheduler air time limit for this VDEV. used by off chan | |
4332 | * scheduler. | |
4333 | */ | |
4334 | WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, | |
4335 | /* enable/dsiable WDS for this VDEV */ | |
4336 | WMI_VDEV_PARAM_WDS, | |
4337 | /* ATIM Window */ | |
4338 | WMI_VDEV_PARAM_ATIM_WINDOW, | |
4339 | /* BMISS max */ | |
4340 | WMI_VDEV_PARAM_BMISS_COUNT_MAX, | |
4341 | /* BMISS first time */ | |
4342 | WMI_VDEV_PARAM_BMISS_FIRST_BCNT, | |
4343 | /* BMISS final time */ | |
4344 | WMI_VDEV_PARAM_BMISS_FINAL_BCNT, | |
4345 | /* WMM enables/disabled */ | |
4346 | WMI_VDEV_PARAM_FEATURE_WMM, | |
4347 | /* Channel width */ | |
4348 | WMI_VDEV_PARAM_CHWIDTH, | |
4349 | /* Channel Offset */ | |
4350 | WMI_VDEV_PARAM_CHEXTOFFSET, | |
4351 | /* Disable HT Protection */ | |
4352 | WMI_VDEV_PARAM_DISABLE_HTPROTECTION, | |
4353 | /* Quick STA Kickout */ | |
4354 | WMI_VDEV_PARAM_STA_QUICKKICKOUT, | |
4355 | /* Rate to be used with Management frames */ | |
4356 | WMI_VDEV_PARAM_MGMT_RATE, | |
4357 | /* Protection Mode */ | |
4358 | WMI_VDEV_PARAM_PROTECTION_MODE, | |
4359 | /* Fixed rate setting */ | |
4360 | WMI_VDEV_PARAM_FIXED_RATE, | |
4361 | /* Short GI Enable/Disable */ | |
4362 | WMI_VDEV_PARAM_SGI, | |
4363 | /* Enable LDPC */ | |
4364 | WMI_VDEV_PARAM_LDPC, | |
4365 | /* Enable Tx STBC */ | |
4366 | WMI_VDEV_PARAM_TX_STBC, | |
4367 | /* Enable Rx STBC */ | |
4368 | WMI_VDEV_PARAM_RX_STBC, | |
4369 | /* Intra BSS forwarding */ | |
4370 | WMI_VDEV_PARAM_INTRA_BSS_FWD, | |
4371 | /* Setting Default xmit key for Vdev */ | |
4372 | WMI_VDEV_PARAM_DEF_KEYID, | |
4373 | /* NSS width */ | |
4374 | WMI_VDEV_PARAM_NSS, | |
4375 | /* Set the custom rate for the broadcast data frames */ | |
4376 | WMI_VDEV_PARAM_BCAST_DATA_RATE, | |
4377 | /* Set the custom rate (rate-code) for multicast data frames */ | |
4378 | WMI_VDEV_PARAM_MCAST_DATA_RATE, | |
4379 | /* Tx multicast packet indicate Enable/Disable */ | |
4380 | WMI_VDEV_PARAM_MCAST_INDICATE, | |
4381 | /* Tx DHCP packet indicate Enable/Disable */ | |
4382 | WMI_VDEV_PARAM_DHCP_INDICATE, | |
4383 | /* Enable host inspection of Tx unicast packet to unknown destination */ | |
4384 | WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, | |
4385 | ||
4386 | /* The minimum amount of time AP begins to consider STA inactive */ | |
4387 | WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, | |
4388 | ||
4389 | /* | |
4390 | * An associated STA is considered inactive when there is no recent | |
4391 | * TX/RX activity and no downlink frames are buffered for it. Once a | |
4392 | * STA exceeds the maximum idle inactive time, the AP will send an | |
4393 | * 802.11 data-null as a keep alive to verify the STA is still | |
4394 | * associated. If the STA does ACK the data-null, or if the data-null | |
4395 | * is buffered and the STA does not retrieve it, the STA will be | |
4396 | * considered unresponsive | |
4397 | * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). | |
4398 | */ | |
4399 | WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, | |
4400 | ||
4401 | /* | |
4402 | * An associated STA is considered unresponsive if there is no recent | |
4403 | * TX/RX activity and downlink frames are buffered for it. Once a STA | |
4404 | * exceeds the maximum unresponsive time, the AP will send a | |
4405 | * WMI_STA_KICKOUT event to the host so the STA can be deleted. */ | |
4406 | WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, | |
4407 | ||
4408 | /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ | |
4409 | WMI_VDEV_PARAM_AP_ENABLE_NAWDS, | |
4410 | /* Enable/Disable RTS-CTS */ | |
4411 | WMI_VDEV_PARAM_ENABLE_RTSCTS, | |
4412 | /* Enable TXBFee/er */ | |
4413 | WMI_VDEV_PARAM_TXBF, | |
4414 | ||
4415 | /* Set packet power save */ | |
4416 | WMI_VDEV_PARAM_PACKET_POWERSAVE, | |
4417 | ||
4418 | /* | |
4419 | * Drops un-encrypted packets if eceived in an encrypted connection | |
4420 | * otherwise forwards to host. | |
4421 | */ | |
4422 | WMI_VDEV_PARAM_DROP_UNENCRY, | |
4423 | ||
4424 | /* | |
4425 | * Set the encapsulation type for frames. | |
4426 | */ | |
4427 | WMI_VDEV_PARAM_TX_ENCAP_TYPE, | |
4428 | }; | |
4429 | ||
6d1506e7 BM |
4430 | /* the definition of different VDEV parameters */ |
4431 | enum wmi_10x_vdev_param { | |
4432 | /* RTS Threshold */ | |
4433 | WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, | |
4434 | /* Fragmentation threshold */ | |
4435 | WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, | |
4436 | /* beacon interval in TUs */ | |
4437 | WMI_10X_VDEV_PARAM_BEACON_INTERVAL, | |
4438 | /* Listen interval in TUs */ | |
4439 | WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, | |
4440 | /* muticast rate in Mbps */ | |
4441 | WMI_10X_VDEV_PARAM_MULTICAST_RATE, | |
4442 | /* management frame rate in Mbps */ | |
4443 | WMI_10X_VDEV_PARAM_MGMT_TX_RATE, | |
4444 | /* slot time (long vs short) */ | |
4445 | WMI_10X_VDEV_PARAM_SLOT_TIME, | |
4446 | /* preamble (long vs short) */ | |
4447 | WMI_10X_VDEV_PARAM_PREAMBLE, | |
4448 | /* SWBA time (time before tbtt in msec) */ | |
4449 | WMI_10X_VDEV_PARAM_SWBA_TIME, | |
4450 | /* time period for updating VDEV stats */ | |
4451 | WMI_10X_VDEV_STATS_UPDATE_PERIOD, | |
4452 | /* age out time in msec for frames queued for station in power save */ | |
4453 | WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, | |
4454 | /* | |
4455 | * Host SWBA interval (time in msec before tbtt for SWBA event | |
4456 | * generation). | |
4457 | */ | |
4458 | WMI_10X_VDEV_HOST_SWBA_INTERVAL, | |
4459 | /* DTIM period (specified in units of num beacon intervals) */ | |
4460 | WMI_10X_VDEV_PARAM_DTIM_PERIOD, | |
4461 | /* | |
4462 | * scheduler air time limit for this VDEV. used by off chan | |
4463 | * scheduler. | |
4464 | */ | |
4465 | WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, | |
4466 | /* enable/dsiable WDS for this VDEV */ | |
4467 | WMI_10X_VDEV_PARAM_WDS, | |
4468 | /* ATIM Window */ | |
4469 | WMI_10X_VDEV_PARAM_ATIM_WINDOW, | |
4470 | /* BMISS max */ | |
4471 | WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, | |
4472 | /* WMM enables/disabled */ | |
4473 | WMI_10X_VDEV_PARAM_FEATURE_WMM, | |
4474 | /* Channel width */ | |
4475 | WMI_10X_VDEV_PARAM_CHWIDTH, | |
4476 | /* Channel Offset */ | |
4477 | WMI_10X_VDEV_PARAM_CHEXTOFFSET, | |
4478 | /* Disable HT Protection */ | |
4479 | WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, | |
4480 | /* Quick STA Kickout */ | |
4481 | WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, | |
4482 | /* Rate to be used with Management frames */ | |
4483 | WMI_10X_VDEV_PARAM_MGMT_RATE, | |
4484 | /* Protection Mode */ | |
4485 | WMI_10X_VDEV_PARAM_PROTECTION_MODE, | |
4486 | /* Fixed rate setting */ | |
4487 | WMI_10X_VDEV_PARAM_FIXED_RATE, | |
4488 | /* Short GI Enable/Disable */ | |
4489 | WMI_10X_VDEV_PARAM_SGI, | |
4490 | /* Enable LDPC */ | |
4491 | WMI_10X_VDEV_PARAM_LDPC, | |
4492 | /* Enable Tx STBC */ | |
4493 | WMI_10X_VDEV_PARAM_TX_STBC, | |
4494 | /* Enable Rx STBC */ | |
4495 | WMI_10X_VDEV_PARAM_RX_STBC, | |
4496 | /* Intra BSS forwarding */ | |
4497 | WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, | |
4498 | /* Setting Default xmit key for Vdev */ | |
4499 | WMI_10X_VDEV_PARAM_DEF_KEYID, | |
4500 | /* NSS width */ | |
4501 | WMI_10X_VDEV_PARAM_NSS, | |
4502 | /* Set the custom rate for the broadcast data frames */ | |
4503 | WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, | |
4504 | /* Set the custom rate (rate-code) for multicast data frames */ | |
4505 | WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, | |
4506 | /* Tx multicast packet indicate Enable/Disable */ | |
4507 | WMI_10X_VDEV_PARAM_MCAST_INDICATE, | |
4508 | /* Tx DHCP packet indicate Enable/Disable */ | |
4509 | WMI_10X_VDEV_PARAM_DHCP_INDICATE, | |
4510 | /* Enable host inspection of Tx unicast packet to unknown destination */ | |
4511 | WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, | |
4512 | ||
4513 | /* The minimum amount of time AP begins to consider STA inactive */ | |
4514 | WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, | |
4515 | ||
4516 | /* | |
4517 | * An associated STA is considered inactive when there is no recent | |
4518 | * TX/RX activity and no downlink frames are buffered for it. Once a | |
4519 | * STA exceeds the maximum idle inactive time, the AP will send an | |
4520 | * 802.11 data-null as a keep alive to verify the STA is still | |
4521 | * associated. If the STA does ACK the data-null, or if the data-null | |
4522 | * is buffered and the STA does not retrieve it, the STA will be | |
4523 | * considered unresponsive | |
4524 | * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). | |
4525 | */ | |
4526 | WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, | |
4527 | ||
4528 | /* | |
4529 | * An associated STA is considered unresponsive if there is no recent | |
4530 | * TX/RX activity and downlink frames are buffered for it. Once a STA | |
4531 | * exceeds the maximum unresponsive time, the AP will send a | |
4532 | * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */ | |
4533 | WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, | |
4534 | ||
4535 | /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ | |
4536 | WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, | |
4537 | ||
4538 | WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, | |
4539 | /* Enable/Disable RTS-CTS */ | |
4540 | WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, | |
4541 | ||
4542 | WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, | |
24c88f78 MK |
4543 | |
4544 | /* following are available as of firmware 10.2 */ | |
4545 | WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, | |
4546 | WMI_10X_VDEV_PARAM_CABQ_MAXDUR, | |
4547 | WMI_10X_VDEV_PARAM_MFPTEST_SET, | |
4548 | WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, | |
4549 | WMI_10X_VDEV_PARAM_VHT_SGIMASK, | |
4550 | WMI_10X_VDEV_PARAM_VHT80_RATEMASK, | |
6d1506e7 BM |
4551 | }; |
4552 | ||
93841a15 RM |
4553 | enum wmi_10_4_vdev_param { |
4554 | WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, | |
4555 | WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, | |
4556 | WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, | |
4557 | WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, | |
4558 | WMI_10_4_VDEV_PARAM_MULTICAST_RATE, | |
4559 | WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, | |
4560 | WMI_10_4_VDEV_PARAM_SLOT_TIME, | |
4561 | WMI_10_4_VDEV_PARAM_PREAMBLE, | |
4562 | WMI_10_4_VDEV_PARAM_SWBA_TIME, | |
4563 | WMI_10_4_VDEV_STATS_UPDATE_PERIOD, | |
4564 | WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, | |
4565 | WMI_10_4_VDEV_HOST_SWBA_INTERVAL, | |
4566 | WMI_10_4_VDEV_PARAM_DTIM_PERIOD, | |
4567 | WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, | |
4568 | WMI_10_4_VDEV_PARAM_WDS, | |
4569 | WMI_10_4_VDEV_PARAM_ATIM_WINDOW, | |
4570 | WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, | |
4571 | WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, | |
4572 | WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, | |
4573 | WMI_10_4_VDEV_PARAM_FEATURE_WMM, | |
4574 | WMI_10_4_VDEV_PARAM_CHWIDTH, | |
4575 | WMI_10_4_VDEV_PARAM_CHEXTOFFSET, | |
4576 | WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, | |
4577 | WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, | |
4578 | WMI_10_4_VDEV_PARAM_MGMT_RATE, | |
4579 | WMI_10_4_VDEV_PARAM_PROTECTION_MODE, | |
4580 | WMI_10_4_VDEV_PARAM_FIXED_RATE, | |
4581 | WMI_10_4_VDEV_PARAM_SGI, | |
4582 | WMI_10_4_VDEV_PARAM_LDPC, | |
4583 | WMI_10_4_VDEV_PARAM_TX_STBC, | |
4584 | WMI_10_4_VDEV_PARAM_RX_STBC, | |
4585 | WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, | |
4586 | WMI_10_4_VDEV_PARAM_DEF_KEYID, | |
4587 | WMI_10_4_VDEV_PARAM_NSS, | |
4588 | WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, | |
4589 | WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, | |
4590 | WMI_10_4_VDEV_PARAM_MCAST_INDICATE, | |
4591 | WMI_10_4_VDEV_PARAM_DHCP_INDICATE, | |
4592 | WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, | |
4593 | WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, | |
4594 | WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, | |
4595 | WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, | |
4596 | WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, | |
4597 | WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, | |
4598 | WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, | |
4599 | WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, | |
4600 | WMI_10_4_VDEV_PARAM_TXBF, | |
4601 | WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, | |
4602 | WMI_10_4_VDEV_PARAM_DROP_UNENCRY, | |
4603 | WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, | |
4604 | WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, | |
4605 | WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, | |
4606 | WMI_10_4_VDEV_PARAM_MFPTEST_SET, | |
4607 | WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, | |
4608 | WMI_10_4_VDEV_PARAM_VHT_SGIMASK, | |
4609 | WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, | |
4610 | WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, | |
4611 | WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, | |
4612 | WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, | |
4613 | WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, | |
4614 | WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, | |
4615 | WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, | |
4616 | WMI_10_4_VDEV_PARAM_PROXY_STA, | |
4617 | WMI_10_4_VDEV_PARAM_MERU_VC, | |
4618 | WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, | |
4619 | WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, | |
4620 | }; | |
4621 | ||
139e170d MK |
4622 | #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) |
4623 | #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) | |
4624 | #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) | |
4625 | #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) | |
4626 | ||
5e3dd157 KV |
4627 | /* slot time long */ |
4628 | #define WMI_VDEV_SLOT_TIME_LONG 0x1 | |
4629 | /* slot time short */ | |
4630 | #define WMI_VDEV_SLOT_TIME_SHORT 0x2 | |
4631 | /* preablbe long */ | |
4632 | #define WMI_VDEV_PREAMBLE_LONG 0x1 | |
4633 | /* preablbe short */ | |
4634 | #define WMI_VDEV_PREAMBLE_SHORT 0x2 | |
4635 | ||
4636 | enum wmi_start_event_param { | |
4637 | WMI_VDEV_RESP_START_EVENT = 0, | |
4638 | WMI_VDEV_RESP_RESTART_EVENT, | |
4639 | }; | |
4640 | ||
4641 | struct wmi_vdev_start_response_event { | |
4642 | __le32 vdev_id; | |
4643 | __le32 req_id; | |
4644 | __le32 resp_type; /* %WMI_VDEV_RESP_ */ | |
4645 | __le32 status; | |
4646 | } __packed; | |
4647 | ||
4648 | struct wmi_vdev_standby_req_event { | |
4649 | /* unique id identifying the VDEV, generated by the caller */ | |
4650 | __le32 vdev_id; | |
4651 | } __packed; | |
4652 | ||
4653 | struct wmi_vdev_resume_req_event { | |
4654 | /* unique id identifying the VDEV, generated by the caller */ | |
4655 | __le32 vdev_id; | |
4656 | } __packed; | |
4657 | ||
4658 | struct wmi_vdev_stopped_event { | |
4659 | /* unique id identifying the VDEV, generated by the caller */ | |
4660 | __le32 vdev_id; | |
4661 | } __packed; | |
4662 | ||
4663 | /* | |
4664 | * common structure used for simple events | |
4665 | * (stopped, resume_req, standby response) | |
4666 | */ | |
4667 | struct wmi_vdev_simple_event { | |
4668 | /* unique id identifying the VDEV, generated by the caller */ | |
4669 | __le32 vdev_id; | |
4670 | } __packed; | |
4671 | ||
4672 | /* VDEV start response status codes */ | |
4673 | /* VDEV succesfully started */ | |
4674 | #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 | |
4675 | ||
4676 | /* requested VDEV not found */ | |
4677 | #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 | |
4678 | ||
4679 | /* unsupported VDEV combination */ | |
4680 | #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 | |
4681 | ||
855aed12 SW |
4682 | /* TODO: please add more comments if you have in-depth information */ |
4683 | struct wmi_vdev_spectral_conf_cmd { | |
4684 | __le32 vdev_id; | |
4685 | ||
4686 | /* number of fft samples to send (0 for infinite) */ | |
4687 | __le32 scan_count; | |
4688 | __le32 scan_period; | |
4689 | __le32 scan_priority; | |
4690 | ||
4691 | /* number of bins in the FFT: 2^(fft_size - bin_scale) */ | |
4692 | __le32 scan_fft_size; | |
4693 | __le32 scan_gc_ena; | |
4694 | __le32 scan_restart_ena; | |
4695 | __le32 scan_noise_floor_ref; | |
4696 | __le32 scan_init_delay; | |
4697 | __le32 scan_nb_tone_thr; | |
4698 | __le32 scan_str_bin_thr; | |
4699 | __le32 scan_wb_rpt_mode; | |
4700 | __le32 scan_rssi_rpt_mode; | |
4701 | __le32 scan_rssi_thr; | |
4702 | __le32 scan_pwr_format; | |
4703 | ||
4704 | /* rpt_mode: Format of FFT report to software for spectral scan | |
4705 | * triggered FFTs: | |
4706 | * 0: No FFT report (only spectral scan summary report) | |
4707 | * 1: 2-dword summary of metrics for each completed FFT + spectral | |
4708 | * scan summary report | |
4709 | * 2: 2-dword summary of metrics for each completed FFT + | |
4710 | * 1x- oversampled bins(in-band) per FFT + spectral scan summary | |
4711 | * report | |
4712 | * 3: 2-dword summary of metrics for each completed FFT + | |
4713 | * 2x- oversampled bins (all) per FFT + spectral scan summary | |
4714 | */ | |
4715 | __le32 scan_rpt_mode; | |
4716 | __le32 scan_bin_scale; | |
4717 | __le32 scan_dbm_adj; | |
4718 | __le32 scan_chn_mask; | |
4719 | } __packed; | |
4720 | ||
4721 | struct wmi_vdev_spectral_conf_arg { | |
4722 | u32 vdev_id; | |
4723 | u32 scan_count; | |
4724 | u32 scan_period; | |
4725 | u32 scan_priority; | |
4726 | u32 scan_fft_size; | |
4727 | u32 scan_gc_ena; | |
4728 | u32 scan_restart_ena; | |
4729 | u32 scan_noise_floor_ref; | |
4730 | u32 scan_init_delay; | |
4731 | u32 scan_nb_tone_thr; | |
4732 | u32 scan_str_bin_thr; | |
4733 | u32 scan_wb_rpt_mode; | |
4734 | u32 scan_rssi_rpt_mode; | |
4735 | u32 scan_rssi_thr; | |
4736 | u32 scan_pwr_format; | |
4737 | u32 scan_rpt_mode; | |
4738 | u32 scan_bin_scale; | |
4739 | u32 scan_dbm_adj; | |
4740 | u32 scan_chn_mask; | |
4741 | }; | |
4742 | ||
4743 | #define WMI_SPECTRAL_ENABLE_DEFAULT 0 | |
4744 | #define WMI_SPECTRAL_COUNT_DEFAULT 0 | |
4745 | #define WMI_SPECTRAL_PERIOD_DEFAULT 35 | |
4746 | #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 | |
4747 | #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 | |
4748 | #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 | |
4749 | #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 | |
4750 | #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 | |
4751 | #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 | |
4752 | #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 | |
4753 | #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 | |
4754 | #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 | |
4755 | #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 | |
4756 | #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 | |
4757 | #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 | |
4758 | #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 | |
4759 | #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 | |
4760 | #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 | |
4761 | #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 | |
4762 | ||
4763 | struct wmi_vdev_spectral_enable_cmd { | |
4764 | __le32 vdev_id; | |
4765 | __le32 trigger_cmd; | |
4766 | __le32 enable_cmd; | |
4767 | } __packed; | |
4768 | ||
4769 | #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 | |
4770 | #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 | |
4771 | #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 | |
4772 | #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 | |
4773 | ||
5e3dd157 KV |
4774 | /* Beacon processing related command and event structures */ |
4775 | struct wmi_bcn_tx_hdr { | |
4776 | __le32 vdev_id; | |
4777 | __le32 tx_rate; | |
4778 | __le32 tx_power; | |
4779 | __le32 bcn_len; | |
4780 | } __packed; | |
4781 | ||
4782 | struct wmi_bcn_tx_cmd { | |
4783 | struct wmi_bcn_tx_hdr hdr; | |
4784 | u8 *bcn[0]; | |
4785 | } __packed; | |
4786 | ||
4787 | struct wmi_bcn_tx_arg { | |
4788 | u32 vdev_id; | |
4789 | u32 tx_rate; | |
4790 | u32 tx_power; | |
4791 | u32 bcn_len; | |
4792 | const void *bcn; | |
4793 | }; | |
4794 | ||
748afc47 MK |
4795 | enum wmi_bcn_tx_ref_flags { |
4796 | WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, | |
4797 | WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, | |
4798 | }; | |
4799 | ||
24c88f78 MK |
4800 | /* TODO: It is unclear why "no antenna" works while any other seemingly valid |
4801 | * chainmask yields no beacons on the air at all. | |
4802 | */ | |
4803 | #define WMI_BCN_TX_REF_DEF_ANTENNA 0 | |
4804 | ||
748afc47 MK |
4805 | struct wmi_bcn_tx_ref_cmd { |
4806 | __le32 vdev_id; | |
4807 | __le32 data_len; | |
4808 | /* physical address of the frame - dma pointer */ | |
4809 | __le32 data_ptr; | |
4810 | /* id for host to track */ | |
4811 | __le32 msdu_id; | |
4812 | /* frame ctrl to setup PPDU desc */ | |
4813 | __le32 frame_control; | |
4814 | /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ | |
4815 | __le32 flags; | |
24c88f78 MK |
4816 | /* introduced in 10.2 */ |
4817 | __le32 antenna_mask; | |
748afc47 MK |
4818 | } __packed; |
4819 | ||
5e3dd157 KV |
4820 | /* Beacon filter */ |
4821 | #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ | |
4822 | #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ | |
4823 | #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ | |
4824 | #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ | |
4825 | #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ | |
4826 | ||
4827 | struct wmi_bcn_filter_rx_cmd { | |
4828 | /* Filter ID */ | |
4829 | __le32 bcn_filter_id; | |
4830 | /* Filter type - wmi_bcn_filter */ | |
4831 | __le32 bcn_filter; | |
4832 | /* Buffer len */ | |
4833 | __le32 bcn_filter_len; | |
4834 | /* Filter info (threshold, BSSID, RSSI) */ | |
4835 | u8 *bcn_filter_buf; | |
4836 | } __packed; | |
4837 | ||
4838 | /* Capabilities and IEs to be passed to firmware */ | |
4839 | struct wmi_bcn_prb_info { | |
4840 | /* Capabilities */ | |
4841 | __le32 caps; | |
4842 | /* ERP info */ | |
4843 | __le32 erp; | |
4844 | /* Advanced capabilities */ | |
4845 | /* HT capabilities */ | |
4846 | /* HT Info */ | |
4847 | /* ibss_dfs */ | |
4848 | /* wpa Info */ | |
4849 | /* rsn Info */ | |
4850 | /* rrm info */ | |
4851 | /* ath_ext */ | |
4852 | /* app IE */ | |
4853 | } __packed; | |
4854 | ||
4855 | struct wmi_bcn_tmpl_cmd { | |
4856 | /* unique id identifying the VDEV, generated by the caller */ | |
4857 | __le32 vdev_id; | |
4858 | /* TIM IE offset from the beginning of the template. */ | |
4859 | __le32 tim_ie_offset; | |
4860 | /* beacon probe capabilities and IEs */ | |
4861 | struct wmi_bcn_prb_info bcn_prb_info; | |
4862 | /* beacon buffer length */ | |
4863 | __le32 buf_len; | |
4864 | /* variable length data */ | |
4865 | u8 data[1]; | |
4866 | } __packed; | |
4867 | ||
4868 | struct wmi_prb_tmpl_cmd { | |
4869 | /* unique id identifying the VDEV, generated by the caller */ | |
4870 | __le32 vdev_id; | |
4871 | /* beacon probe capabilities and IEs */ | |
4872 | struct wmi_bcn_prb_info bcn_prb_info; | |
4873 | /* beacon buffer length */ | |
4874 | __le32 buf_len; | |
4875 | /* Variable length data */ | |
4876 | u8 data[1]; | |
4877 | } __packed; | |
4878 | ||
4879 | enum wmi_sta_ps_mode { | |
4880 | /* enable power save for the given STA VDEV */ | |
4881 | WMI_STA_PS_MODE_DISABLED = 0, | |
4882 | /* disable power save for a given STA VDEV */ | |
4883 | WMI_STA_PS_MODE_ENABLED = 1, | |
4884 | }; | |
4885 | ||
4886 | struct wmi_sta_powersave_mode_cmd { | |
4887 | /* unique id identifying the VDEV, generated by the caller */ | |
4888 | __le32 vdev_id; | |
4889 | ||
4890 | /* | |
4891 | * Power save mode | |
4892 | * (see enum wmi_sta_ps_mode) | |
4893 | */ | |
4894 | __le32 sta_ps_mode; | |
4895 | } __packed; | |
4896 | ||
4897 | enum wmi_csa_offload_en { | |
4898 | WMI_CSA_OFFLOAD_DISABLE = 0, | |
4899 | WMI_CSA_OFFLOAD_ENABLE = 1, | |
4900 | }; | |
4901 | ||
4902 | struct wmi_csa_offload_enable_cmd { | |
4903 | __le32 vdev_id; | |
4904 | __le32 csa_offload_enable; | |
4905 | } __packed; | |
4906 | ||
4907 | struct wmi_csa_offload_chanswitch_cmd { | |
4908 | __le32 vdev_id; | |
4909 | struct wmi_channel chan; | |
4910 | } __packed; | |
4911 | ||
4912 | /* | |
4913 | * This parameter controls the policy for retrieving frames from AP while the | |
4914 | * STA is in sleep state. | |
4915 | * | |
4916 | * Only takes affect if the sta_ps_mode is enabled | |
4917 | */ | |
4918 | enum wmi_sta_ps_param_rx_wake_policy { | |
4919 | /* | |
4920 | * Wake up when ever there is an RX activity on the VDEV. In this mode | |
4921 | * the Power save SM(state machine) will come out of sleep by either | |
4922 | * sending null frame (or) a data frame (with PS==0) in response to TIM | |
4923 | * bit set in the received beacon frame from AP. | |
4924 | */ | |
4925 | WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, | |
4926 | ||
4927 | /* | |
4928 | * Here the power save state machine will not wakeup in response to TIM | |
4929 | * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD | |
4930 | * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all | |
4931 | * access categories are delivery-enabled, the station will send a | |
4932 | * UAPSD trigger frame, otherwise it will send a PS-Poll. | |
4933 | */ | |
4934 | WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, | |
4935 | }; | |
4936 | ||
4937 | /* | |
4938 | * Number of tx frames/beacon that cause the power save SM to wake up. | |
4939 | * | |
4940 | * Value 1 causes the SM to wake up for every TX. Value 0 has a special | |
4941 | * meaning, It will cause the SM to never wake up. This is useful if you want | |
4942 | * to keep the system to sleep all the time for some kind of test mode . host | |
4943 | * can change this parameter any time. It will affect at the next tx frame. | |
4944 | */ | |
4945 | enum wmi_sta_ps_param_tx_wake_threshold { | |
4946 | WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, | |
4947 | WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, | |
4948 | ||
4949 | /* | |
4950 | * Values greater than one indicate that many TX attempts per beacon | |
4951 | * interval before the STA will wake up | |
4952 | */ | |
4953 | }; | |
4954 | ||
4955 | /* | |
4956 | * The maximum number of PS-Poll frames the FW will send in response to | |
4957 | * traffic advertised in TIM before waking up (by sending a null frame with PS | |
4958 | * = 0). Value 0 has a special meaning: there is no maximum count and the FW | |
4959 | * will send as many PS-Poll as are necessary to retrieve buffered BU. This | |
4960 | * parameter is used when the RX wake policy is | |
4961 | * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake | |
4962 | * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. | |
4963 | */ | |
4964 | enum wmi_sta_ps_param_pspoll_count { | |
4965 | WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, | |
4966 | /* | |
4967 | * Values greater than 0 indicate the maximum numer of PS-Poll frames | |
4968 | * FW will send before waking up. | |
4969 | */ | |
9f9b5746 MK |
4970 | |
4971 | /* When u-APSD is enabled the firmware will be very reluctant to exit | |
4972 | * STA PS. This could result in very poor Rx performance with STA doing | |
4973 | * PS-Poll for each and every buffered frame. This value is a bit | |
4974 | * arbitrary. | |
4975 | */ | |
4976 | WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, | |
5e3dd157 KV |
4977 | }; |
4978 | ||
4979 | /* | |
4980 | * This will include the delivery and trigger enabled state for every AC. | |
4981 | * This is the negotiated state with AP. The host MLME needs to set this based | |
4982 | * on AP capability and the state Set in the association request by the | |
4983 | * station MLME.Lower 8 bits of the value specify the UAPSD configuration. | |
4984 | */ | |
4985 | #define WMI_UAPSD_AC_TYPE_DELI 0 | |
4986 | #define WMI_UAPSD_AC_TYPE_TRIG 1 | |
4987 | ||
4988 | #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ | |
4989 | ((type == WMI_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) : (1<<((ac<<1)+1))) | |
4990 | ||
4991 | enum wmi_sta_ps_param_uapsd { | |
4992 | WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), | |
4993 | WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), | |
4994 | WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), | |
4995 | WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), | |
4996 | WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), | |
4997 | WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), | |
4998 | WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), | |
4999 | WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), | |
5000 | }; | |
5001 | ||
0c7e477c JD |
5002 | #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX |
5003 | ||
5004 | struct wmi_sta_uapsd_auto_trig_param { | |
5005 | __le32 wmm_ac; | |
5006 | __le32 user_priority; | |
5007 | __le32 service_interval; | |
5008 | __le32 suspend_interval; | |
5009 | __le32 delay_interval; | |
5010 | }; | |
5011 | ||
5012 | struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { | |
5013 | __le32 vdev_id; | |
5014 | struct wmi_mac_addr peer_macaddr; | |
5015 | __le32 num_ac; | |
5016 | }; | |
5017 | ||
5018 | struct wmi_sta_uapsd_auto_trig_arg { | |
5019 | u32 wmm_ac; | |
5020 | u32 user_priority; | |
5021 | u32 service_interval; | |
5022 | u32 suspend_interval; | |
5023 | u32 delay_interval; | |
5024 | }; | |
5025 | ||
5e3dd157 KV |
5026 | enum wmi_sta_powersave_param { |
5027 | /* | |
5028 | * Controls how frames are retrievd from AP while STA is sleeping | |
5029 | * | |
5030 | * (see enum wmi_sta_ps_param_rx_wake_policy) | |
5031 | */ | |
5032 | WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, | |
5033 | ||
5034 | /* | |
5035 | * The STA will go active after this many TX | |
5036 | * | |
5037 | * (see enum wmi_sta_ps_param_tx_wake_threshold) | |
5038 | */ | |
5039 | WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, | |
5040 | ||
5041 | /* | |
5042 | * Number of PS-Poll to send before STA wakes up | |
5043 | * | |
5044 | * (see enum wmi_sta_ps_param_pspoll_count) | |
5045 | * | |
5046 | */ | |
5047 | WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, | |
5048 | ||
5049 | /* | |
5050 | * TX/RX inactivity time in msec before going to sleep. | |
5051 | * | |
5052 | * The power save SM will monitor tx/rx activity on the VDEV, if no | |
5053 | * activity for the specified msec of the parameter the Power save | |
5054 | * SM will go to sleep. | |
5055 | */ | |
5056 | WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, | |
5057 | ||
5058 | /* | |
5059 | * Set uapsd configuration. | |
5060 | * | |
5061 | * (see enum wmi_sta_ps_param_uapsd) | |
5062 | */ | |
5063 | WMI_STA_PS_PARAM_UAPSD = 4, | |
5064 | }; | |
5065 | ||
5066 | struct wmi_sta_powersave_param_cmd { | |
5067 | __le32 vdev_id; | |
5068 | __le32 param_id; /* %WMI_STA_PS_PARAM_ */ | |
5069 | __le32 param_value; | |
5070 | } __packed; | |
5071 | ||
5072 | /* No MIMO power save */ | |
5073 | #define WMI_STA_MIMO_PS_MODE_DISABLE | |
5074 | /* mimo powersave mode static*/ | |
5075 | #define WMI_STA_MIMO_PS_MODE_STATIC | |
5076 | /* mimo powersave mode dynamic */ | |
5077 | #define WMI_STA_MIMO_PS_MODE_DYNAMIC | |
5078 | ||
5079 | struct wmi_sta_mimo_ps_mode_cmd { | |
5080 | /* unique id identifying the VDEV, generated by the caller */ | |
5081 | __le32 vdev_id; | |
5082 | /* mimo powersave mode as defined above */ | |
5083 | __le32 mimo_pwrsave_mode; | |
5084 | } __packed; | |
5085 | ||
5086 | /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ | |
5087 | enum wmi_ap_ps_param_uapsd { | |
5088 | WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), | |
5089 | WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), | |
5090 | WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), | |
5091 | WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), | |
5092 | WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), | |
5093 | WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), | |
5094 | WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), | |
5095 | WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), | |
5096 | }; | |
5097 | ||
5098 | /* U-APSD maximum service period of peer station */ | |
5099 | enum wmi_ap_ps_peer_param_max_sp { | |
5100 | WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, | |
5101 | WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, | |
5102 | WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, | |
5103 | WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, | |
5104 | MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, | |
5105 | }; | |
5106 | ||
5107 | /* | |
5108 | * AP power save parameter | |
5109 | * Set a power save specific parameter for a peer station | |
5110 | */ | |
5111 | enum wmi_ap_ps_peer_param { | |
5112 | /* Set uapsd configuration for a given peer. | |
5113 | * | |
5114 | * Include the delivery and trigger enabled state for every AC. | |
5115 | * The host MLME needs to set this based on AP capability and stations | |
5116 | * request Set in the association request received from the station. | |
5117 | * | |
5118 | * Lower 8 bits of the value specify the UAPSD configuration. | |
5119 | * | |
5120 | * (see enum wmi_ap_ps_param_uapsd) | |
5121 | * The default value is 0. | |
5122 | */ | |
5123 | WMI_AP_PS_PEER_PARAM_UAPSD = 0, | |
5124 | ||
5125 | /* | |
5126 | * Set the service period for a UAPSD capable station | |
5127 | * | |
5128 | * The service period from wme ie in the (re)assoc request frame. | |
5129 | * | |
5130 | * (see enum wmi_ap_ps_peer_param_max_sp) | |
5131 | */ | |
5132 | WMI_AP_PS_PEER_PARAM_MAX_SP = 1, | |
5133 | ||
5134 | /* Time in seconds for aging out buffered frames for STA in PS */ | |
5135 | WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, | |
5136 | }; | |
5137 | ||
5138 | struct wmi_ap_ps_peer_cmd { | |
5139 | /* unique id identifying the VDEV, generated by the caller */ | |
5140 | __le32 vdev_id; | |
5141 | ||
5142 | /* peer MAC address */ | |
5143 | struct wmi_mac_addr peer_macaddr; | |
5144 | ||
5145 | /* AP powersave param (see enum wmi_ap_ps_peer_param) */ | |
5146 | __le32 param_id; | |
5147 | ||
5148 | /* AP powersave param value */ | |
5149 | __le32 param_value; | |
5150 | } __packed; | |
5151 | ||
5152 | /* 128 clients = 4 words */ | |
5153 | #define WMI_TIM_BITMAP_ARRAY_SIZE 4 | |
5154 | ||
5155 | struct wmi_tim_info { | |
5156 | __le32 tim_len; | |
5157 | __le32 tim_mcast; | |
5158 | __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; | |
5159 | __le32 tim_changed; | |
5160 | __le32 tim_num_ps_pending; | |
5161 | } __packed; | |
5162 | ||
a03fee34 RM |
5163 | struct wmi_tim_info_arg { |
5164 | __le32 tim_len; | |
5165 | __le32 tim_mcast; | |
5166 | const __le32 *tim_bitmap; | |
5167 | __le32 tim_changed; | |
5168 | __le32 tim_num_ps_pending; | |
5169 | } __packed; | |
5170 | ||
5e3dd157 KV |
5171 | /* Maximum number of NOA Descriptors supported */ |
5172 | #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 | |
5173 | #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) | |
5174 | #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 | |
5175 | #define WMI_P2P_NOA_CHANGED_BIT BIT(0) | |
5176 | ||
5177 | struct wmi_p2p_noa_info { | |
5178 | /* Bit 0 - Flag to indicate an update in NOA schedule | |
5179 | Bits 7-1 - Reserved */ | |
5180 | u8 changed; | |
5181 | /* NOA index */ | |
5182 | u8 index; | |
5183 | /* Bit 0 - Opp PS state of the AP | |
5184 | Bits 1-7 - Ctwindow in TUs */ | |
5185 | u8 ctwindow_oppps; | |
5186 | /* Number of NOA descriptors */ | |
5187 | u8 num_descriptors; | |
5188 | ||
5189 | struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; | |
5190 | } __packed; | |
5191 | ||
5192 | struct wmi_bcn_info { | |
5193 | struct wmi_tim_info tim_info; | |
5194 | struct wmi_p2p_noa_info p2p_noa_info; | |
5195 | } __packed; | |
5196 | ||
5197 | struct wmi_host_swba_event { | |
5198 | __le32 vdev_map; | |
32653cf1 | 5199 | struct wmi_bcn_info bcn_info[0]; |
5e3dd157 KV |
5200 | } __packed; |
5201 | ||
5202 | #define WMI_MAX_AP_VDEV 16 | |
5203 | ||
5204 | struct wmi_tbtt_offset_event { | |
5205 | __le32 vdev_map; | |
5206 | __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; | |
5207 | } __packed; | |
5208 | ||
5e3dd157 KV |
5209 | struct wmi_peer_create_cmd { |
5210 | __le32 vdev_id; | |
5211 | struct wmi_mac_addr peer_macaddr; | |
5212 | } __packed; | |
5213 | ||
7390ed34 MP |
5214 | enum wmi_peer_type { |
5215 | WMI_PEER_TYPE_DEFAULT = 0, | |
5216 | WMI_PEER_TYPE_BSS = 1, | |
5217 | WMI_PEER_TYPE_TDLS = 2, | |
5218 | }; | |
5219 | ||
5e3dd157 KV |
5220 | struct wmi_peer_delete_cmd { |
5221 | __le32 vdev_id; | |
5222 | struct wmi_mac_addr peer_macaddr; | |
5223 | } __packed; | |
5224 | ||
5225 | struct wmi_peer_flush_tids_cmd { | |
5226 | __le32 vdev_id; | |
5227 | struct wmi_mac_addr peer_macaddr; | |
5228 | __le32 peer_tid_bitmap; | |
5229 | } __packed; | |
5230 | ||
5231 | struct wmi_fixed_rate { | |
5232 | /* | |
5233 | * rate mode . 0: disable fixed rate (auto rate) | |
5234 | * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps | |
5235 | * 2: ht20 11n rate specified as mcs index | |
5236 | * 3: ht40 11n rate specified as mcs index | |
5237 | */ | |
5238 | __le32 rate_mode; | |
5239 | /* | |
5240 | * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) | |
5241 | * and series 3 is stored at byte 3 (MSB) | |
5242 | */ | |
5243 | __le32 rate_series; | |
5244 | /* | |
5245 | * 4 retry counts for 4 rate series. retry count for rate 0 is stored | |
5246 | * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 | |
5247 | * (MSB) | |
5248 | */ | |
5249 | __le32 rate_retries; | |
5250 | } __packed; | |
5251 | ||
5252 | struct wmi_peer_fixed_rate_cmd { | |
5253 | /* unique id identifying the VDEV, generated by the caller */ | |
5254 | __le32 vdev_id; | |
5255 | /* peer MAC address */ | |
5256 | struct wmi_mac_addr peer_macaddr; | |
5257 | /* fixed rate */ | |
5258 | struct wmi_fixed_rate peer_fixed_rate; | |
5259 | } __packed; | |
5260 | ||
5261 | #define WMI_MGMT_TID 17 | |
5262 | ||
5263 | struct wmi_addba_clear_resp_cmd { | |
5264 | /* unique id identifying the VDEV, generated by the caller */ | |
5265 | __le32 vdev_id; | |
5266 | /* peer MAC address */ | |
5267 | struct wmi_mac_addr peer_macaddr; | |
5268 | } __packed; | |
5269 | ||
5270 | struct wmi_addba_send_cmd { | |
5271 | /* unique id identifying the VDEV, generated by the caller */ | |
5272 | __le32 vdev_id; | |
5273 | /* peer MAC address */ | |
5274 | struct wmi_mac_addr peer_macaddr; | |
5275 | /* Tid number */ | |
5276 | __le32 tid; | |
5277 | /* Buffer/Window size*/ | |
5278 | __le32 buffersize; | |
5279 | } __packed; | |
5280 | ||
5281 | struct wmi_delba_send_cmd { | |
5282 | /* unique id identifying the VDEV, generated by the caller */ | |
5283 | __le32 vdev_id; | |
5284 | /* peer MAC address */ | |
5285 | struct wmi_mac_addr peer_macaddr; | |
5286 | /* Tid number */ | |
5287 | __le32 tid; | |
5288 | /* Is Initiator */ | |
5289 | __le32 initiator; | |
5290 | /* Reason code */ | |
5291 | __le32 reasoncode; | |
5292 | } __packed; | |
5293 | ||
5294 | struct wmi_addba_setresponse_cmd { | |
5295 | /* unique id identifying the vdev, generated by the caller */ | |
5296 | __le32 vdev_id; | |
5297 | /* peer mac address */ | |
5298 | struct wmi_mac_addr peer_macaddr; | |
5299 | /* Tid number */ | |
5300 | __le32 tid; | |
5301 | /* status code */ | |
5302 | __le32 statuscode; | |
5303 | } __packed; | |
5304 | ||
5305 | struct wmi_send_singleamsdu_cmd { | |
5306 | /* unique id identifying the vdev, generated by the caller */ | |
5307 | __le32 vdev_id; | |
5308 | /* peer mac address */ | |
5309 | struct wmi_mac_addr peer_macaddr; | |
5310 | /* Tid number */ | |
5311 | __le32 tid; | |
5312 | } __packed; | |
5313 | ||
5314 | enum wmi_peer_smps_state { | |
5315 | WMI_PEER_SMPS_PS_NONE = 0x0, | |
5316 | WMI_PEER_SMPS_STATIC = 0x1, | |
5317 | WMI_PEER_SMPS_DYNAMIC = 0x2 | |
5318 | }; | |
5319 | ||
9797febc MK |
5320 | enum wmi_peer_chwidth { |
5321 | WMI_PEER_CHWIDTH_20MHZ = 0, | |
5322 | WMI_PEER_CHWIDTH_40MHZ = 1, | |
5323 | WMI_PEER_CHWIDTH_80MHZ = 2, | |
5324 | }; | |
5325 | ||
5e3dd157 KV |
5326 | enum wmi_peer_param { |
5327 | WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ | |
5328 | WMI_PEER_AMPDU = 0x2, | |
5329 | WMI_PEER_AUTHORIZE = 0x3, | |
5330 | WMI_PEER_CHAN_WIDTH = 0x4, | |
5331 | WMI_PEER_NSS = 0x5, | |
0a987fb0 MK |
5332 | WMI_PEER_USE_4ADDR = 0x6, |
5333 | WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ | |
5e3dd157 KV |
5334 | }; |
5335 | ||
5336 | struct wmi_peer_set_param_cmd { | |
5337 | __le32 vdev_id; | |
5338 | struct wmi_mac_addr peer_macaddr; | |
5339 | __le32 param_id; | |
5340 | __le32 param_value; | |
5341 | } __packed; | |
5342 | ||
5343 | #define MAX_SUPPORTED_RATES 128 | |
5344 | ||
5345 | struct wmi_rate_set { | |
5346 | /* total number of rates */ | |
5347 | __le32 num_rates; | |
5348 | /* | |
5349 | * rates (each 8bit value) packed into a 32 bit word. | |
5350 | * the rates are filled from least significant byte to most | |
5351 | * significant byte. | |
5352 | */ | |
5353 | __le32 rates[(MAX_SUPPORTED_RATES/4)+1]; | |
5354 | } __packed; | |
5355 | ||
5356 | struct wmi_rate_set_arg { | |
5357 | unsigned int num_rates; | |
5358 | u8 rates[MAX_SUPPORTED_RATES]; | |
5359 | }; | |
5360 | ||
5361 | /* | |
5362 | * NOTE: It would bea good idea to represent the Tx MCS | |
5363 | * info in one word and Rx in another word. This is split | |
5364 | * into multiple words for convenience | |
5365 | */ | |
5366 | struct wmi_vht_rate_set { | |
5367 | __le32 rx_max_rate; /* Max Rx data rate */ | |
5368 | __le32 rx_mcs_set; /* Negotiated RX VHT rates */ | |
5369 | __le32 tx_max_rate; /* Max Tx data rate */ | |
5370 | __le32 tx_mcs_set; /* Negotiated TX VHT rates */ | |
5371 | } __packed; | |
5372 | ||
5373 | struct wmi_vht_rate_set_arg { | |
5374 | u32 rx_max_rate; | |
5375 | u32 rx_mcs_set; | |
5376 | u32 tx_max_rate; | |
5377 | u32 tx_mcs_set; | |
5378 | }; | |
5379 | ||
5380 | struct wmi_peer_set_rates_cmd { | |
5381 | /* peer MAC address */ | |
5382 | struct wmi_mac_addr peer_macaddr; | |
5383 | /* legacy rate set */ | |
5384 | struct wmi_rate_set peer_legacy_rates; | |
5385 | /* ht rate set */ | |
5386 | struct wmi_rate_set peer_ht_rates; | |
5387 | } __packed; | |
5388 | ||
5389 | struct wmi_peer_set_q_empty_callback_cmd { | |
5390 | /* unique id identifying the VDEV, generated by the caller */ | |
5391 | __le32 vdev_id; | |
5392 | /* peer MAC address */ | |
5393 | struct wmi_mac_addr peer_macaddr; | |
5394 | __le32 callback_enable; | |
5395 | } __packed; | |
5396 | ||
5397 | #define WMI_PEER_AUTH 0x00000001 | |
5398 | #define WMI_PEER_QOS 0x00000002 | |
5399 | #define WMI_PEER_NEED_PTK_4_WAY 0x00000004 | |
5400 | #define WMI_PEER_NEED_GTK_2_WAY 0x00000010 | |
5401 | #define WMI_PEER_APSD 0x00000800 | |
5402 | #define WMI_PEER_HT 0x00001000 | |
5403 | #define WMI_PEER_40MHZ 0x00002000 | |
5404 | #define WMI_PEER_STBC 0x00008000 | |
5405 | #define WMI_PEER_LDPC 0x00010000 | |
5406 | #define WMI_PEER_DYN_MIMOPS 0x00020000 | |
5407 | #define WMI_PEER_STATIC_MIMOPS 0x00040000 | |
5408 | #define WMI_PEER_SPATIAL_MUX 0x00200000 | |
5409 | #define WMI_PEER_VHT 0x02000000 | |
5410 | #define WMI_PEER_80MHZ 0x04000000 | |
d68bb12a | 5411 | #define WMI_PEER_VHT_2G 0x08000000 |
5e3dd157 KV |
5412 | |
5413 | /* | |
5414 | * Peer rate capabilities. | |
5415 | * | |
5416 | * This is of interest to the ratecontrol | |
5417 | * module which resides in the firmware. The bit definitions are | |
5418 | * consistent with that defined in if_athrate.c. | |
5419 | */ | |
5420 | #define WMI_RC_DS_FLAG 0x01 | |
5421 | #define WMI_RC_CW40_FLAG 0x02 | |
5422 | #define WMI_RC_SGI_FLAG 0x04 | |
5423 | #define WMI_RC_HT_FLAG 0x08 | |
5424 | #define WMI_RC_RTSCTS_FLAG 0x10 | |
5425 | #define WMI_RC_TX_STBC_FLAG 0x20 | |
5426 | #define WMI_RC_RX_STBC_FLAG 0xC0 | |
5427 | #define WMI_RC_RX_STBC_FLAG_S 6 | |
5428 | #define WMI_RC_WEP_TKIP_FLAG 0x100 | |
5429 | #define WMI_RC_TS_FLAG 0x200 | |
5430 | #define WMI_RC_UAPSD_FLAG 0x400 | |
5431 | ||
5432 | /* Maximum listen interval supported by hw in units of beacon interval */ | |
5433 | #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 | |
5434 | ||
24c88f78 | 5435 | struct wmi_common_peer_assoc_complete_cmd { |
5e3dd157 KV |
5436 | struct wmi_mac_addr peer_macaddr; |
5437 | __le32 vdev_id; | |
5438 | __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ | |
5439 | __le32 peer_associd; /* 16 LSBs */ | |
5440 | __le32 peer_flags; | |
5441 | __le32 peer_caps; /* 16 LSBs */ | |
5442 | __le32 peer_listen_intval; | |
5443 | __le32 peer_ht_caps; | |
5444 | __le32 peer_max_mpdu; | |
5445 | __le32 peer_mpdu_density; /* 0..16 */ | |
5446 | __le32 peer_rate_caps; | |
5447 | struct wmi_rate_set peer_legacy_rates; | |
5448 | struct wmi_rate_set peer_ht_rates; | |
5449 | __le32 peer_nss; /* num of spatial streams */ | |
5450 | __le32 peer_vht_caps; | |
5451 | __le32 peer_phymode; | |
5452 | struct wmi_vht_rate_set peer_vht_rates; | |
24c88f78 MK |
5453 | }; |
5454 | ||
5455 | struct wmi_main_peer_assoc_complete_cmd { | |
5456 | struct wmi_common_peer_assoc_complete_cmd cmd; | |
5457 | ||
5e3dd157 KV |
5458 | /* HT Operation Element of the peer. Five bytes packed in 2 |
5459 | * INT32 array and filled from lsb to msb. */ | |
5460 | __le32 peer_ht_info[2]; | |
5461 | } __packed; | |
5462 | ||
24c88f78 MK |
5463 | struct wmi_10_1_peer_assoc_complete_cmd { |
5464 | struct wmi_common_peer_assoc_complete_cmd cmd; | |
5465 | } __packed; | |
5466 | ||
5467 | #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 | |
5468 | #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f | |
5469 | #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 | |
5470 | #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 | |
5471 | ||
5472 | struct wmi_10_2_peer_assoc_complete_cmd { | |
5473 | struct wmi_common_peer_assoc_complete_cmd cmd; | |
5474 | __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ | |
5475 | } __packed; | |
5476 | ||
5e3dd157 KV |
5477 | struct wmi_peer_assoc_complete_arg { |
5478 | u8 addr[ETH_ALEN]; | |
5479 | u32 vdev_id; | |
5480 | bool peer_reassoc; | |
5481 | u16 peer_aid; | |
5482 | u32 peer_flags; /* see %WMI_PEER_ */ | |
5483 | u16 peer_caps; | |
5484 | u32 peer_listen_intval; | |
5485 | u32 peer_ht_caps; | |
5486 | u32 peer_max_mpdu; | |
5487 | u32 peer_mpdu_density; /* 0..16 */ | |
5488 | u32 peer_rate_caps; /* see %WMI_RC_ */ | |
5489 | struct wmi_rate_set_arg peer_legacy_rates; | |
5490 | struct wmi_rate_set_arg peer_ht_rates; | |
5491 | u32 peer_num_spatial_streams; | |
5492 | u32 peer_vht_caps; | |
5493 | enum wmi_phy_mode peer_phymode; | |
5494 | struct wmi_vht_rate_set_arg peer_vht_rates; | |
5495 | }; | |
5496 | ||
5497 | struct wmi_peer_add_wds_entry_cmd { | |
5498 | /* peer MAC address */ | |
5499 | struct wmi_mac_addr peer_macaddr; | |
5500 | /* wds MAC addr */ | |
5501 | struct wmi_mac_addr wds_macaddr; | |
5502 | } __packed; | |
5503 | ||
5504 | struct wmi_peer_remove_wds_entry_cmd { | |
5505 | /* wds MAC addr */ | |
5506 | struct wmi_mac_addr wds_macaddr; | |
5507 | } __packed; | |
5508 | ||
5509 | struct wmi_peer_q_empty_callback_event { | |
5510 | /* peer MAC address */ | |
5511 | struct wmi_mac_addr peer_macaddr; | |
5512 | } __packed; | |
5513 | ||
5514 | /* | |
5515 | * Channel info WMI event | |
5516 | */ | |
5517 | struct wmi_chan_info_event { | |
5518 | __le32 err_code; | |
5519 | __le32 freq; | |
5520 | __le32 cmd_flags; | |
5521 | __le32 noise_floor; | |
5522 | __le32 rx_clear_count; | |
5523 | __le32 cycle_count; | |
5524 | } __packed; | |
5525 | ||
5a13e76e KV |
5526 | struct wmi_peer_sta_kickout_event { |
5527 | struct wmi_mac_addr peer_macaddr; | |
5528 | } __packed; | |
5529 | ||
2e1dea40 | 5530 | #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) |
2e1dea40 | 5531 | |
5e3dd157 KV |
5532 | /* Beacon filter wmi command info */ |
5533 | #define BCN_FLT_MAX_SUPPORTED_IES 256 | |
5534 | #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) | |
5535 | ||
5536 | struct bss_bcn_stats { | |
5537 | __le32 vdev_id; | |
5538 | __le32 bss_bcnsdropped; | |
5539 | __le32 bss_bcnsdelivered; | |
5540 | } __packed; | |
5541 | ||
5542 | struct bcn_filter_stats { | |
5543 | __le32 bcns_dropped; | |
5544 | __le32 bcns_delivered; | |
5545 | __le32 activefilters; | |
5546 | struct bss_bcn_stats bss_stats; | |
5547 | } __packed; | |
5548 | ||
5549 | struct wmi_add_bcn_filter_cmd { | |
5550 | u32 vdev_id; | |
5551 | u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; | |
5552 | } __packed; | |
5553 | ||
5554 | enum wmi_sta_keepalive_method { | |
5555 | WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, | |
5556 | WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, | |
5557 | }; | |
5558 | ||
46725b15 MK |
5559 | #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 |
5560 | ||
5561 | /* Firmware crashes if keepalive interval exceeds this limit */ | |
5562 | #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff | |
5563 | ||
5e3dd157 KV |
5564 | /* note: ip4 addresses are in network byte order, i.e. big endian */ |
5565 | struct wmi_sta_keepalive_arp_resp { | |
5566 | __be32 src_ip4_addr; | |
5567 | __be32 dest_ip4_addr; | |
5568 | struct wmi_mac_addr dest_mac_addr; | |
5569 | } __packed; | |
5570 | ||
5571 | struct wmi_sta_keepalive_cmd { | |
5572 | __le32 vdev_id; | |
5573 | __le32 enabled; | |
5574 | __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ | |
5575 | __le32 interval; /* in seconds */ | |
5576 | struct wmi_sta_keepalive_arp_resp arp_resp; | |
5577 | } __packed; | |
5578 | ||
6e8b188b JD |
5579 | struct wmi_sta_keepalive_arg { |
5580 | u32 vdev_id; | |
5581 | u32 enabled; | |
5582 | u32 method; | |
5583 | u32 interval; | |
5584 | __be32 src_ip4_addr; | |
5585 | __be32 dest_ip4_addr; | |
5586 | const u8 dest_mac_addr[ETH_ALEN]; | |
5587 | }; | |
5588 | ||
9cfbce75 MK |
5589 | enum wmi_force_fw_hang_type { |
5590 | WMI_FORCE_FW_HANG_ASSERT = 1, | |
5591 | WMI_FORCE_FW_HANG_NO_DETECT, | |
5592 | WMI_FORCE_FW_HANG_CTRL_EP_FULL, | |
5593 | WMI_FORCE_FW_HANG_EMPTY_POINT, | |
5594 | WMI_FORCE_FW_HANG_STACK_OVERFLOW, | |
5595 | WMI_FORCE_FW_HANG_INFINITE_LOOP, | |
5596 | }; | |
5597 | ||
5598 | #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF | |
5599 | ||
5600 | struct wmi_force_fw_hang_cmd { | |
5601 | __le32 type; | |
5602 | __le32 delay_ms; | |
5603 | } __packed; | |
5604 | ||
f118a3e5 KV |
5605 | enum ath10k_dbglog_level { |
5606 | ATH10K_DBGLOG_LEVEL_VERBOSE = 0, | |
5607 | ATH10K_DBGLOG_LEVEL_INFO = 1, | |
5608 | ATH10K_DBGLOG_LEVEL_WARN = 2, | |
5609 | ATH10K_DBGLOG_LEVEL_ERR = 3, | |
5610 | }; | |
5611 | ||
5612 | /* VAP ids to enable dbglog */ | |
5613 | #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 | |
5614 | #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff | |
5615 | ||
5616 | /* to enable dbglog in the firmware */ | |
5617 | #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 | |
5618 | #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 | |
5619 | ||
5620 | /* timestamp resolution */ | |
5621 | #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 | |
5622 | #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 | |
5623 | ||
5624 | /* number of queued messages before sending them to the host */ | |
5625 | #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 | |
5626 | #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 | |
5627 | ||
5628 | /* | |
5629 | * Log levels to enable. This defines the minimum level to enable, this is | |
5630 | * not a bitmask. See enum ath10k_dbglog_level for the values. | |
5631 | */ | |
5632 | #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 | |
5633 | #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 | |
5634 | ||
5635 | /* | |
5636 | * Note: this is a cleaned up version of a struct firmware uses. For | |
5637 | * example, config_valid was hidden inside an array. | |
5638 | */ | |
5639 | struct wmi_dbglog_cfg_cmd { | |
5640 | /* bitmask to hold mod id config*/ | |
5641 | __le32 module_enable; | |
5642 | ||
5643 | /* see ATH10K_DBGLOG_CFG_ */ | |
5644 | __le32 config_enable; | |
5645 | ||
5646 | /* mask of module id bits to be changed */ | |
5647 | __le32 module_valid; | |
5648 | ||
5649 | /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ | |
5650 | __le32 config_valid; | |
5651 | } __packed; | |
5652 | ||
c1a4654a MK |
5653 | enum wmi_roam_reason { |
5654 | WMI_ROAM_REASON_BETTER_AP = 1, | |
5655 | WMI_ROAM_REASON_BEACON_MISS = 2, | |
5656 | WMI_ROAM_REASON_LOW_RSSI = 3, | |
5657 | WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, | |
5658 | WMI_ROAM_REASON_HO_FAILED = 5, | |
5659 | ||
5660 | /* keep last */ | |
5661 | WMI_ROAM_REASON_MAX, | |
5662 | }; | |
5663 | ||
5664 | struct wmi_roam_ev { | |
5665 | __le32 vdev_id; | |
5666 | __le32 reason; | |
5667 | } __packed; | |
5668 | ||
5e3dd157 KV |
5669 | #define ATH10K_FRAGMT_THRESHOLD_MIN 540 |
5670 | #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 | |
5671 | ||
5672 | #define WMI_MAX_EVENT 0x1000 | |
5673 | /* Maximum number of pending TXed WMI packets */ | |
5e3dd157 KV |
5674 | #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) |
5675 | ||
5676 | /* By default disable power save for IBSS */ | |
5677 | #define ATH10K_DEFAULT_ATIM 0 | |
5678 | ||
5c01aa3d MK |
5679 | #define WMI_MAX_MEM_REQS 16 |
5680 | ||
32653cf1 MK |
5681 | struct wmi_scan_ev_arg { |
5682 | __le32 event_type; /* %WMI_SCAN_EVENT_ */ | |
5683 | __le32 reason; /* %WMI_SCAN_REASON_ */ | |
5684 | __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ | |
5685 | __le32 scan_req_id; | |
5686 | __le32 scan_id; | |
5687 | __le32 vdev_id; | |
5688 | }; | |
5689 | ||
5690 | struct wmi_mgmt_rx_ev_arg { | |
5691 | __le32 channel; | |
5692 | __le32 snr; | |
5693 | __le32 rate; | |
5694 | __le32 phy_mode; | |
5695 | __le32 buf_len; | |
5696 | __le32 status; /* %WMI_RX_STATUS_ */ | |
5697 | }; | |
5698 | ||
5699 | struct wmi_ch_info_ev_arg { | |
5700 | __le32 err_code; | |
5701 | __le32 freq; | |
5702 | __le32 cmd_flags; | |
5703 | __le32 noise_floor; | |
5704 | __le32 rx_clear_count; | |
5705 | __le32 cycle_count; | |
5706 | }; | |
5707 | ||
5708 | struct wmi_vdev_start_ev_arg { | |
5709 | __le32 vdev_id; | |
5710 | __le32 req_id; | |
5711 | __le32 resp_type; /* %WMI_VDEV_RESP_ */ | |
5712 | __le32 status; | |
5713 | }; | |
5714 | ||
5715 | struct wmi_peer_kick_ev_arg { | |
5716 | const u8 *mac_addr; | |
5717 | }; | |
5718 | ||
5719 | struct wmi_swba_ev_arg { | |
5720 | __le32 vdev_map; | |
a03fee34 | 5721 | struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; |
32653cf1 MK |
5722 | const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; |
5723 | }; | |
5724 | ||
5725 | struct wmi_phyerr_ev_arg { | |
5726 | __le32 num_phyerrs; | |
5727 | __le32 tsf_l32; | |
5728 | __le32 tsf_u32; | |
5729 | __le32 buf_len; | |
5730 | const struct wmi_phyerr *phyerrs; | |
5731 | }; | |
5732 | ||
5c01aa3d MK |
5733 | struct wmi_svc_rdy_ev_arg { |
5734 | __le32 min_tx_power; | |
5735 | __le32 max_tx_power; | |
5736 | __le32 ht_cap; | |
5737 | __le32 vht_cap; | |
5738 | __le32 sw_ver0; | |
5739 | __le32 sw_ver1; | |
ca996ec5 | 5740 | __le32 fw_build; |
5c01aa3d MK |
5741 | __le32 phy_capab; |
5742 | __le32 num_rf_chains; | |
5743 | __le32 eeprom_rd; | |
5744 | __le32 num_mem_reqs; | |
5745 | const __le32 *service_map; | |
2a3e60d3 | 5746 | size_t service_map_len; |
5c01aa3d MK |
5747 | const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; |
5748 | }; | |
5749 | ||
32653cf1 MK |
5750 | struct wmi_rdy_ev_arg { |
5751 | __le32 sw_version; | |
5752 | __le32 abi_version; | |
5753 | __le32 status; | |
5754 | const u8 *mac_addr; | |
5755 | }; | |
5756 | ||
c1a4654a MK |
5757 | struct wmi_roam_ev_arg { |
5758 | __le32 vdev_id; | |
5759 | __le32 reason; | |
5760 | __le32 rssi; | |
5761 | }; | |
5762 | ||
a57a6a27 RM |
5763 | struct wmi_pdev_temperature_event { |
5764 | /* temperature value in Celcius degree */ | |
5765 | __le32 temperature; | |
5766 | } __packed; | |
5767 | ||
f5431e87 JD |
5768 | /* WOW structures */ |
5769 | enum wmi_wow_wakeup_event { | |
5770 | WOW_BMISS_EVENT = 0, | |
5771 | WOW_BETTER_AP_EVENT, | |
5772 | WOW_DEAUTH_RECVD_EVENT, | |
5773 | WOW_MAGIC_PKT_RECVD_EVENT, | |
5774 | WOW_GTK_ERR_EVENT, | |
5775 | WOW_FOURWAY_HSHAKE_EVENT, | |
5776 | WOW_EAPOL_RECVD_EVENT, | |
5777 | WOW_NLO_DETECTED_EVENT, | |
5778 | WOW_DISASSOC_RECVD_EVENT, | |
5779 | WOW_PATTERN_MATCH_EVENT, | |
5780 | WOW_CSA_IE_EVENT, | |
5781 | WOW_PROBE_REQ_WPS_IE_EVENT, | |
5782 | WOW_AUTH_REQ_EVENT, | |
5783 | WOW_ASSOC_REQ_EVENT, | |
5784 | WOW_HTT_EVENT, | |
5785 | WOW_RA_MATCH_EVENT, | |
5786 | WOW_HOST_AUTO_SHUTDOWN_EVENT, | |
5787 | WOW_IOAC_MAGIC_EVENT, | |
5788 | WOW_IOAC_SHORT_EVENT, | |
5789 | WOW_IOAC_EXTEND_EVENT, | |
5790 | WOW_IOAC_TIMER_EVENT, | |
5791 | WOW_DFS_PHYERR_RADAR_EVENT, | |
5792 | WOW_BEACON_EVENT, | |
5793 | WOW_CLIENT_KICKOUT_EVENT, | |
5794 | WOW_EVENT_MAX, | |
5795 | }; | |
5796 | ||
5797 | #define C2S(x) case x: return #x | |
5798 | ||
5799 | static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) | |
5800 | { | |
5801 | switch (ev) { | |
5802 | C2S(WOW_BMISS_EVENT); | |
5803 | C2S(WOW_BETTER_AP_EVENT); | |
5804 | C2S(WOW_DEAUTH_RECVD_EVENT); | |
5805 | C2S(WOW_MAGIC_PKT_RECVD_EVENT); | |
5806 | C2S(WOW_GTK_ERR_EVENT); | |
5807 | C2S(WOW_FOURWAY_HSHAKE_EVENT); | |
5808 | C2S(WOW_EAPOL_RECVD_EVENT); | |
5809 | C2S(WOW_NLO_DETECTED_EVENT); | |
5810 | C2S(WOW_DISASSOC_RECVD_EVENT); | |
5811 | C2S(WOW_PATTERN_MATCH_EVENT); | |
5812 | C2S(WOW_CSA_IE_EVENT); | |
5813 | C2S(WOW_PROBE_REQ_WPS_IE_EVENT); | |
5814 | C2S(WOW_AUTH_REQ_EVENT); | |
5815 | C2S(WOW_ASSOC_REQ_EVENT); | |
5816 | C2S(WOW_HTT_EVENT); | |
5817 | C2S(WOW_RA_MATCH_EVENT); | |
5818 | C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); | |
5819 | C2S(WOW_IOAC_MAGIC_EVENT); | |
5820 | C2S(WOW_IOAC_SHORT_EVENT); | |
5821 | C2S(WOW_IOAC_EXTEND_EVENT); | |
5822 | C2S(WOW_IOAC_TIMER_EVENT); | |
5823 | C2S(WOW_DFS_PHYERR_RADAR_EVENT); | |
5824 | C2S(WOW_BEACON_EVENT); | |
5825 | C2S(WOW_CLIENT_KICKOUT_EVENT); | |
5826 | C2S(WOW_EVENT_MAX); | |
5827 | default: | |
5828 | return NULL; | |
5829 | } | |
5830 | } | |
5831 | ||
5832 | enum wmi_wow_wake_reason { | |
5833 | WOW_REASON_UNSPECIFIED = -1, | |
5834 | WOW_REASON_NLOD = 0, | |
5835 | WOW_REASON_AP_ASSOC_LOST, | |
5836 | WOW_REASON_LOW_RSSI, | |
5837 | WOW_REASON_DEAUTH_RECVD, | |
5838 | WOW_REASON_DISASSOC_RECVD, | |
5839 | WOW_REASON_GTK_HS_ERR, | |
5840 | WOW_REASON_EAP_REQ, | |
5841 | WOW_REASON_FOURWAY_HS_RECV, | |
5842 | WOW_REASON_TIMER_INTR_RECV, | |
5843 | WOW_REASON_PATTERN_MATCH_FOUND, | |
5844 | WOW_REASON_RECV_MAGIC_PATTERN, | |
5845 | WOW_REASON_P2P_DISC, | |
5846 | WOW_REASON_WLAN_HB, | |
5847 | WOW_REASON_CSA_EVENT, | |
5848 | WOW_REASON_PROBE_REQ_WPS_IE_RECV, | |
5849 | WOW_REASON_AUTH_REQ_RECV, | |
5850 | WOW_REASON_ASSOC_REQ_RECV, | |
5851 | WOW_REASON_HTT_EVENT, | |
5852 | WOW_REASON_RA_MATCH, | |
5853 | WOW_REASON_HOST_AUTO_SHUTDOWN, | |
5854 | WOW_REASON_IOAC_MAGIC_EVENT, | |
5855 | WOW_REASON_IOAC_SHORT_EVENT, | |
5856 | WOW_REASON_IOAC_EXTEND_EVENT, | |
5857 | WOW_REASON_IOAC_TIMER_EVENT, | |
5858 | WOW_REASON_ROAM_HO, | |
5859 | WOW_REASON_DFS_PHYERR_RADADR_EVENT, | |
5860 | WOW_REASON_BEACON_RECV, | |
5861 | WOW_REASON_CLIENT_KICKOUT_EVENT, | |
5862 | WOW_REASON_DEBUG_TEST = 0xFF, | |
5863 | }; | |
5864 | ||
5865 | static inline const char *wow_reason(enum wmi_wow_wake_reason reason) | |
5866 | { | |
5867 | switch (reason) { | |
5868 | C2S(WOW_REASON_UNSPECIFIED); | |
5869 | C2S(WOW_REASON_NLOD); | |
5870 | C2S(WOW_REASON_AP_ASSOC_LOST); | |
5871 | C2S(WOW_REASON_LOW_RSSI); | |
5872 | C2S(WOW_REASON_DEAUTH_RECVD); | |
5873 | C2S(WOW_REASON_DISASSOC_RECVD); | |
5874 | C2S(WOW_REASON_GTK_HS_ERR); | |
5875 | C2S(WOW_REASON_EAP_REQ); | |
5876 | C2S(WOW_REASON_FOURWAY_HS_RECV); | |
5877 | C2S(WOW_REASON_TIMER_INTR_RECV); | |
5878 | C2S(WOW_REASON_PATTERN_MATCH_FOUND); | |
5879 | C2S(WOW_REASON_RECV_MAGIC_PATTERN); | |
5880 | C2S(WOW_REASON_P2P_DISC); | |
5881 | C2S(WOW_REASON_WLAN_HB); | |
5882 | C2S(WOW_REASON_CSA_EVENT); | |
5883 | C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); | |
5884 | C2S(WOW_REASON_AUTH_REQ_RECV); | |
5885 | C2S(WOW_REASON_ASSOC_REQ_RECV); | |
5886 | C2S(WOW_REASON_HTT_EVENT); | |
5887 | C2S(WOW_REASON_RA_MATCH); | |
5888 | C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); | |
5889 | C2S(WOW_REASON_IOAC_MAGIC_EVENT); | |
5890 | C2S(WOW_REASON_IOAC_SHORT_EVENT); | |
5891 | C2S(WOW_REASON_IOAC_EXTEND_EVENT); | |
5892 | C2S(WOW_REASON_IOAC_TIMER_EVENT); | |
5893 | C2S(WOW_REASON_ROAM_HO); | |
5894 | C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); | |
5895 | C2S(WOW_REASON_BEACON_RECV); | |
5896 | C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); | |
5897 | C2S(WOW_REASON_DEBUG_TEST); | |
5898 | default: | |
5899 | return NULL; | |
5900 | } | |
5901 | } | |
5902 | ||
5903 | #undef C2S | |
5904 | ||
5905 | struct wmi_wow_ev_arg { | |
5906 | u32 vdev_id; | |
5907 | u32 flag; | |
5908 | enum wmi_wow_wake_reason wake_reason; | |
5909 | u32 data_len; | |
5910 | }; | |
5911 | ||
25c86619 JD |
5912 | #define WOW_MIN_PATTERN_SIZE 1 |
5913 | #define WOW_MAX_PATTERN_SIZE 148 | |
5914 | #define WOW_MAX_PKT_OFFSET 128 | |
5915 | ||
ad45c888 MP |
5916 | enum wmi_tdls_state { |
5917 | WMI_TDLS_DISABLE, | |
5918 | WMI_TDLS_ENABLE_PASSIVE, | |
5919 | WMI_TDLS_ENABLE_ACTIVE, | |
5920 | }; | |
5921 | ||
5922 | enum wmi_tdls_peer_state { | |
5923 | WMI_TDLS_PEER_STATE_PEERING, | |
5924 | WMI_TDLS_PEER_STATE_CONNECTED, | |
5925 | WMI_TDLS_PEER_STATE_TEARDOWN, | |
5926 | }; | |
5927 | ||
5928 | struct wmi_tdls_peer_update_cmd_arg { | |
5929 | u32 vdev_id; | |
5930 | enum wmi_tdls_peer_state peer_state; | |
5931 | u8 addr[ETH_ALEN]; | |
5932 | }; | |
5933 | ||
5934 | #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 | |
5935 | ||
5936 | struct wmi_tdls_peer_capab_arg { | |
5937 | u8 peer_uapsd_queues; | |
5938 | u8 peer_max_sp; | |
5939 | u32 buff_sta_support; | |
5940 | u32 off_chan_support; | |
5941 | u32 peer_curr_operclass; | |
5942 | u32 self_curr_operclass; | |
5943 | u32 peer_chan_len; | |
5944 | u32 peer_operclass_len; | |
5945 | u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; | |
5946 | u32 is_peer_responder; | |
5947 | u32 pref_offchan_num; | |
5948 | u32 pref_offchan_bw; | |
5949 | }; | |
5950 | ||
5e3dd157 KV |
5951 | struct ath10k; |
5952 | struct ath10k_vif; | |
0226d602 MK |
5953 | struct ath10k_fw_stats_pdev; |
5954 | struct ath10k_fw_stats_peer; | |
5e3dd157 KV |
5955 | |
5956 | int ath10k_wmi_attach(struct ath10k *ar); | |
5957 | void ath10k_wmi_detach(struct ath10k *ar); | |
5958 | int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); | |
5959 | int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); | |
5e3dd157 | 5960 | |
0226d602 | 5961 | struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); |
95bf21f9 | 5962 | int ath10k_wmi_connect(struct ath10k *ar); |
666a73f3 KV |
5963 | |
5964 | struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); | |
5965 | int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); | |
d7579d12 MK |
5966 | int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, |
5967 | u32 cmd_id); | |
5e3dd157 | 5968 | void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *); |
5e3dd157 | 5969 | |
b91251fb MK |
5970 | void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, |
5971 | struct ath10k_fw_stats_pdev *dst); | |
5972 | void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, | |
5973 | struct ath10k_fw_stats_pdev *dst); | |
5974 | void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, | |
5975 | struct ath10k_fw_stats_pdev *dst); | |
5976 | void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, | |
5977 | struct ath10k_fw_stats_pdev *dst); | |
0226d602 MK |
5978 | void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, |
5979 | struct ath10k_fw_stats_peer *dst); | |
5980 | void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, | |
5981 | struct wmi_host_mem_chunks *chunks); | |
5982 | void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, | |
5983 | const struct wmi_start_scan_arg *arg); | |
5e752e42 MK |
5984 | void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, |
5985 | const struct wmi_wmm_params_arg *arg); | |
0226d602 MK |
5986 | void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, |
5987 | const struct wmi_channel_arg *arg); | |
5988 | int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); | |
5989 | ||
5990 | int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); | |
5991 | int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); | |
5992 | void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); | |
5993 | void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); | |
5994 | int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); | |
5995 | void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); | |
5996 | void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); | |
5997 | void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); | |
5998 | void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); | |
5999 | void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); | |
6000 | void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); | |
6001 | void ath10k_wmi_event_dfs(struct ath10k *ar, | |
6002 | const struct wmi_phyerr *phyerr, u64 tsf); | |
6003 | void ath10k_wmi_event_spectral_scan(struct ath10k *ar, | |
6004 | const struct wmi_phyerr *phyerr, | |
6005 | u64 tsf); | |
6006 | void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); | |
6007 | void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); | |
6008 | void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); | |
6009 | void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); | |
6010 | void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); | |
6011 | void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); | |
6012 | void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, | |
6013 | struct sk_buff *skb); | |
6014 | void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, | |
6015 | struct sk_buff *skb); | |
6016 | void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); | |
6017 | void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); | |
6018 | void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); | |
6019 | void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); | |
6020 | void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); | |
6021 | void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, | |
6022 | struct sk_buff *skb); | |
6023 | void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); | |
6024 | void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); | |
6025 | void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); | |
6026 | void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, | |
6027 | struct sk_buff *skb); | |
6028 | void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); | |
6029 | void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); | |
6030 | void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); | |
6031 | void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); | |
6032 | int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); | |
6033 | ||
5e3dd157 | 6034 | #endif /* _WMI_H_ */ |