]>
Commit | Line | Data |
---|---|---|
b481de9c ZY |
1 | /****************************************************************************** |
2 | * | |
3 | * Copyright(c) 2003 - 2007 Intel Corporation. All rights reserved. | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or modify it | |
6 | * under the terms of version 2 of the GNU General Public License as | |
7 | * published by the Free Software Foundation. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, but WITHOUT | |
10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
12 | * more details. | |
13 | * | |
14 | * You should have received a copy of the GNU General Public License along with | |
15 | * this program; if not, write to the Free Software Foundation, Inc., | |
16 | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | |
17 | * | |
18 | * The full GNU General Public License is included in this distribution in the | |
19 | * file called LICENSE. | |
20 | * | |
21 | * Contact Information: | |
22 | * James P. Ketrenos <ipw2100-admin@linux.intel.com> | |
23 | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
24 | * | |
25 | *****************************************************************************/ | |
26 | ||
27 | #include <linux/kernel.h> | |
28 | #include <linux/module.h> | |
29 | #include <linux/version.h> | |
30 | #include <linux/init.h> | |
31 | #include <linux/pci.h> | |
32 | #include <linux/dma-mapping.h> | |
33 | #include <linux/delay.h> | |
34 | #include <linux/skbuff.h> | |
35 | #include <linux/netdevice.h> | |
36 | #include <linux/wireless.h> | |
37 | #include <linux/firmware.h> | |
38 | #include <net/mac80211.h> | |
39 | ||
40 | #include <linux/etherdevice.h> | |
b481de9c | 41 | |
b481de9c | 42 | #include "iwl-3945.h" |
5d08cd1d | 43 | #include "iwl-helpers.h" |
b481de9c ZY |
44 | #include "iwl-3945-rs.h" |
45 | ||
46 | #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \ | |
47 | [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ | |
48 | IWL_RATE_##r##M_IEEE, \ | |
49 | IWL_RATE_##ip##M_INDEX, \ | |
50 | IWL_RATE_##in##M_INDEX, \ | |
51 | IWL_RATE_##rp##M_INDEX, \ | |
52 | IWL_RATE_##rn##M_INDEX, \ | |
53 | IWL_RATE_##pp##M_INDEX, \ | |
14577f23 MA |
54 | IWL_RATE_##np##M_INDEX, \ |
55 | IWL_RATE_##r##M_INDEX_TABLE, \ | |
56 | IWL_RATE_##ip##M_INDEX_TABLE } | |
b481de9c ZY |
57 | |
58 | /* | |
59 | * Parameter order: | |
60 | * rate, prev rate, next rate, prev tgg rate, next tgg rate | |
61 | * | |
62 | * If there isn't a valid next or previous rate then INV is used which | |
63 | * maps to IWL_RATE_INVALID | |
64 | * | |
65 | */ | |
bb8c093b | 66 | const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT] = { |
14577f23 MA |
67 | IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */ |
68 | IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */ | |
69 | IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */ | |
70 | IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */ | |
b481de9c ZY |
71 | IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */ |
72 | IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */ | |
73 | IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */ | |
74 | IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */ | |
75 | IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */ | |
76 | IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */ | |
77 | IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */ | |
78 | IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */ | |
b481de9c ZY |
79 | }; |
80 | ||
bb8c093b | 81 | /* 1 = enable the iwl3945_disable_events() function */ |
b481de9c ZY |
82 | #define IWL_EVT_DISABLE (0) |
83 | #define IWL_EVT_DISABLE_SIZE (1532/32) | |
84 | ||
85 | /** | |
bb8c093b | 86 | * iwl3945_disable_events - Disable selected events in uCode event log |
b481de9c ZY |
87 | * |
88 | * Disable an event by writing "1"s into "disable" | |
89 | * bitmap in SRAM. Bit position corresponds to Event # (id/type). | |
90 | * Default values of 0 enable uCode events to be logged. | |
91 | * Use for only special debugging. This function is just a placeholder as-is, | |
92 | * you'll need to provide the special bits! ... | |
93 | * ... and set IWL_EVT_DISABLE to 1. */ | |
bb8c093b | 94 | void iwl3945_disable_events(struct iwl3945_priv *priv) |
b481de9c | 95 | { |
af7cca2a | 96 | int ret; |
b481de9c ZY |
97 | int i; |
98 | u32 base; /* SRAM address of event log header */ | |
99 | u32 disable_ptr; /* SRAM address of event-disable bitmap array */ | |
100 | u32 array_size; /* # of u32 entries in array */ | |
101 | u32 evt_disable[IWL_EVT_DISABLE_SIZE] = { | |
102 | 0x00000000, /* 31 - 0 Event id numbers */ | |
103 | 0x00000000, /* 63 - 32 */ | |
104 | 0x00000000, /* 95 - 64 */ | |
105 | 0x00000000, /* 127 - 96 */ | |
106 | 0x00000000, /* 159 - 128 */ | |
107 | 0x00000000, /* 191 - 160 */ | |
108 | 0x00000000, /* 223 - 192 */ | |
109 | 0x00000000, /* 255 - 224 */ | |
110 | 0x00000000, /* 287 - 256 */ | |
111 | 0x00000000, /* 319 - 288 */ | |
112 | 0x00000000, /* 351 - 320 */ | |
113 | 0x00000000, /* 383 - 352 */ | |
114 | 0x00000000, /* 415 - 384 */ | |
115 | 0x00000000, /* 447 - 416 */ | |
116 | 0x00000000, /* 479 - 448 */ | |
117 | 0x00000000, /* 511 - 480 */ | |
118 | 0x00000000, /* 543 - 512 */ | |
119 | 0x00000000, /* 575 - 544 */ | |
120 | 0x00000000, /* 607 - 576 */ | |
121 | 0x00000000, /* 639 - 608 */ | |
122 | 0x00000000, /* 671 - 640 */ | |
123 | 0x00000000, /* 703 - 672 */ | |
124 | 0x00000000, /* 735 - 704 */ | |
125 | 0x00000000, /* 767 - 736 */ | |
126 | 0x00000000, /* 799 - 768 */ | |
127 | 0x00000000, /* 831 - 800 */ | |
128 | 0x00000000, /* 863 - 832 */ | |
129 | 0x00000000, /* 895 - 864 */ | |
130 | 0x00000000, /* 927 - 896 */ | |
131 | 0x00000000, /* 959 - 928 */ | |
132 | 0x00000000, /* 991 - 960 */ | |
133 | 0x00000000, /* 1023 - 992 */ | |
134 | 0x00000000, /* 1055 - 1024 */ | |
135 | 0x00000000, /* 1087 - 1056 */ | |
136 | 0x00000000, /* 1119 - 1088 */ | |
137 | 0x00000000, /* 1151 - 1120 */ | |
138 | 0x00000000, /* 1183 - 1152 */ | |
139 | 0x00000000, /* 1215 - 1184 */ | |
140 | 0x00000000, /* 1247 - 1216 */ | |
141 | 0x00000000, /* 1279 - 1248 */ | |
142 | 0x00000000, /* 1311 - 1280 */ | |
143 | 0x00000000, /* 1343 - 1312 */ | |
144 | 0x00000000, /* 1375 - 1344 */ | |
145 | 0x00000000, /* 1407 - 1376 */ | |
146 | 0x00000000, /* 1439 - 1408 */ | |
147 | 0x00000000, /* 1471 - 1440 */ | |
148 | 0x00000000, /* 1503 - 1472 */ | |
149 | }; | |
150 | ||
151 | base = le32_to_cpu(priv->card_alive.log_event_table_ptr); | |
bb8c093b | 152 | if (!iwl3945_hw_valid_rtc_data_addr(base)) { |
b481de9c ZY |
153 | IWL_ERROR("Invalid event log pointer 0x%08X\n", base); |
154 | return; | |
155 | } | |
156 | ||
bb8c093b | 157 | ret = iwl3945_grab_nic_access(priv); |
af7cca2a | 158 | if (ret) { |
b481de9c ZY |
159 | IWL_WARNING("Can not read from adapter at this time.\n"); |
160 | return; | |
161 | } | |
162 | ||
bb8c093b CH |
163 | disable_ptr = iwl3945_read_targ_mem(priv, base + (4 * sizeof(u32))); |
164 | array_size = iwl3945_read_targ_mem(priv, base + (5 * sizeof(u32))); | |
165 | iwl3945_release_nic_access(priv); | |
b481de9c ZY |
166 | |
167 | if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) { | |
168 | IWL_DEBUG_INFO("Disabling selected uCode log events at 0x%x\n", | |
169 | disable_ptr); | |
bb8c093b | 170 | ret = iwl3945_grab_nic_access(priv); |
b481de9c | 171 | for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++) |
bb8c093b | 172 | iwl3945_write_targ_mem(priv, |
af7cca2a TW |
173 | disable_ptr + (i * sizeof(u32)), |
174 | evt_disable[i]); | |
b481de9c | 175 | |
bb8c093b | 176 | iwl3945_release_nic_access(priv); |
b481de9c ZY |
177 | } else { |
178 | IWL_DEBUG_INFO("Selected uCode log events may be disabled\n"); | |
179 | IWL_DEBUG_INFO(" by writing \"1\"s into disable bitmap\n"); | |
180 | IWL_DEBUG_INFO(" in SRAM at 0x%x, size %d u32s\n", | |
181 | disable_ptr, array_size); | |
182 | } | |
183 | ||
184 | } | |
185 | ||
186 | /** | |
187 | * iwl3945_get_antenna_flags - Get antenna flags for RXON command | |
188 | * @priv: eeprom and antenna fields are used to determine antenna flags | |
189 | * | |
190 | * priv->eeprom is used to determine if antenna AUX/MAIN are reversed | |
191 | * priv->antenna specifies the antenna diversity mode: | |
192 | * | |
193 | * IWL_ANTENNA_DIVERISTY - NIC selects best antenna by itself | |
194 | * IWL_ANTENNA_MAIN - Force MAIN antenna | |
195 | * IWL_ANTENNA_AUX - Force AUX antenna | |
196 | */ | |
bb8c093b | 197 | __le32 iwl3945_get_antenna_flags(const struct iwl3945_priv *priv) |
b481de9c ZY |
198 | { |
199 | switch (priv->antenna) { | |
200 | case IWL_ANTENNA_DIVERSITY: | |
201 | return 0; | |
202 | ||
203 | case IWL_ANTENNA_MAIN: | |
204 | if (priv->eeprom.antenna_switch_type) | |
205 | return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; | |
206 | return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; | |
207 | ||
208 | case IWL_ANTENNA_AUX: | |
209 | if (priv->eeprom.antenna_switch_type) | |
210 | return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; | |
211 | return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; | |
212 | } | |
213 | ||
214 | /* bad antenna selector value */ | |
215 | IWL_ERROR("Bad antenna selector value (0x%x)\n", priv->antenna); | |
216 | return 0; /* "diversity" is default if error */ | |
217 | } | |
218 | ||
219 | /***************************************************************************** | |
220 | * | |
221 | * Intel PRO/Wireless 3945ABG/BG Network Connection | |
222 | * | |
223 | * RX handler implementations | |
224 | * | |
225 | * Used by iwl-base.c | |
226 | * | |
227 | *****************************************************************************/ | |
228 | ||
bb8c093b | 229 | void iwl3945_hw_rx_statistics(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb) |
b481de9c | 230 | { |
bb8c093b | 231 | struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data; |
b481de9c | 232 | IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n", |
bb8c093b | 233 | (int)sizeof(struct iwl3945_notif_statistics), |
b481de9c ZY |
234 | le32_to_cpu(pkt->len)); |
235 | ||
236 | memcpy(&priv->statistics, pkt->u.raw, sizeof(priv->statistics)); | |
237 | ||
238 | priv->last_statistics_time = jiffies; | |
239 | } | |
240 | ||
bb8c093b CH |
241 | static void iwl3945_handle_data_packet(struct iwl3945_priv *priv, int is_data, |
242 | struct iwl3945_rx_mem_buffer *rxb, | |
b481de9c ZY |
243 | struct ieee80211_rx_status *stats, |
244 | u16 phy_flags) | |
245 | { | |
246 | struct ieee80211_hdr *hdr; | |
bb8c093b CH |
247 | struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data; |
248 | struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); | |
249 | struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); | |
b481de9c ZY |
250 | short len = le16_to_cpu(rx_hdr->len); |
251 | ||
252 | /* We received data from the HW, so stop the watchdog */ | |
253 | if (unlikely((len + IWL_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) { | |
254 | IWL_DEBUG_DROP("Corruption detected!\n"); | |
255 | return; | |
256 | } | |
257 | ||
258 | /* We only process data packets if the interface is open */ | |
259 | if (unlikely(!priv->is_open)) { | |
260 | IWL_DEBUG_DROP_LIMIT | |
261 | ("Dropping packet while interface is not open.\n"); | |
262 | return; | |
263 | } | |
264 | if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { | |
bb8c093b CH |
265 | if (iwl3945_param_hwcrypto) |
266 | iwl3945_set_decrypted_flag(priv, rxb->skb, | |
b481de9c ZY |
267 | le32_to_cpu(rx_end->status), |
268 | stats); | |
bb8c093b | 269 | iwl3945_handle_data_packet_monitor(priv, rxb, IWL_RX_DATA(pkt), |
b481de9c ZY |
270 | len, stats, phy_flags); |
271 | return; | |
272 | } | |
273 | ||
274 | skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt); | |
275 | /* Set the size of the skb to the size of the frame */ | |
276 | skb_put(rxb->skb, le16_to_cpu(rx_hdr->len)); | |
277 | ||
278 | hdr = (void *)rxb->skb->data; | |
279 | ||
bb8c093b CH |
280 | if (iwl3945_param_hwcrypto) |
281 | iwl3945_set_decrypted_flag(priv, rxb->skb, | |
b481de9c ZY |
282 | le32_to_cpu(rx_end->status), stats); |
283 | ||
284 | ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); | |
285 | rxb->skb = NULL; | |
286 | } | |
287 | ||
bb8c093b CH |
288 | static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, |
289 | struct iwl3945_rx_mem_buffer *rxb) | |
b481de9c | 290 | { |
bb8c093b CH |
291 | struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data; |
292 | struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt); | |
293 | struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); | |
294 | struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); | |
b481de9c ZY |
295 | struct ieee80211_hdr *header; |
296 | u16 phy_flags = le16_to_cpu(rx_hdr->phy_flags); | |
297 | u16 rx_stats_sig_avg = le16_to_cpu(rx_stats->sig_avg); | |
298 | u16 rx_stats_noise_diff = le16_to_cpu(rx_stats->noise_diff); | |
299 | struct ieee80211_rx_status stats = { | |
300 | .mactime = le64_to_cpu(rx_end->timestamp), | |
301 | .freq = ieee80211chan2mhz(le16_to_cpu(rx_hdr->channel)), | |
302 | .channel = le16_to_cpu(rx_hdr->channel), | |
303 | .phymode = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? | |
304 | MODE_IEEE80211G : MODE_IEEE80211A, | |
305 | .antenna = 0, | |
306 | .rate = rx_hdr->rate, | |
307 | .flag = 0, | |
308 | }; | |
309 | u8 network_packet; | |
310 | int snr; | |
311 | ||
312 | if ((unlikely(rx_stats->phy_count > 20))) { | |
313 | IWL_DEBUG_DROP | |
314 | ("dsp size out of range [0,20]: " | |
315 | "%d/n", rx_stats->phy_count); | |
316 | return; | |
317 | } | |
318 | ||
319 | if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) | |
320 | || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { | |
321 | IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status); | |
322 | return; | |
323 | } | |
324 | ||
325 | if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { | |
326 | iwl3945_handle_data_packet(priv, 1, rxb, &stats, phy_flags); | |
327 | return; | |
328 | } | |
329 | ||
330 | /* Convert 3945's rssi indicator to dBm */ | |
331 | stats.ssi = rx_stats->rssi - IWL_RSSI_OFFSET; | |
332 | ||
333 | /* Set default noise value to -127 */ | |
334 | if (priv->last_rx_noise == 0) | |
335 | priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; | |
336 | ||
337 | /* 3945 provides noise info for OFDM frames only. | |
338 | * sig_avg and noise_diff are measured by the 3945's digital signal | |
339 | * processor (DSP), and indicate linear levels of signal level and | |
340 | * distortion/noise within the packet preamble after | |
341 | * automatic gain control (AGC). sig_avg should stay fairly | |
342 | * constant if the radio's AGC is working well. | |
343 | * Since these values are linear (not dB or dBm), linear | |
344 | * signal-to-noise ratio (SNR) is (sig_avg / noise_diff). | |
345 | * Convert linear SNR to dB SNR, then subtract that from rssi dBm | |
346 | * to obtain noise level in dBm. | |
347 | * Calculate stats.signal (quality indicator in %) based on SNR. */ | |
348 | if (rx_stats_noise_diff) { | |
349 | snr = rx_stats_sig_avg / rx_stats_noise_diff; | |
bb8c093b CH |
350 | stats.noise = stats.ssi - iwl3945_calc_db_from_ratio(snr); |
351 | stats.signal = iwl3945_calc_sig_qual(stats.ssi, stats.noise); | |
b481de9c ZY |
352 | |
353 | /* If noise info not available, calculate signal quality indicator (%) | |
354 | * using just the dBm signal level. */ | |
355 | } else { | |
356 | stats.noise = priv->last_rx_noise; | |
bb8c093b | 357 | stats.signal = iwl3945_calc_sig_qual(stats.ssi, 0); |
b481de9c ZY |
358 | } |
359 | ||
360 | ||
361 | IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n", | |
362 | stats.ssi, stats.noise, stats.signal, | |
363 | rx_stats_sig_avg, rx_stats_noise_diff); | |
364 | ||
365 | stats.freq = ieee80211chan2mhz(stats.channel); | |
366 | ||
bb8c093b | 367 | /* can be covered by iwl3945_report_frame() in most cases */ |
b481de9c ZY |
368 | /* IWL_DEBUG_RX("RX status: 0x%08X\n", rx_end->status); */ |
369 | ||
370 | header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); | |
371 | ||
bb8c093b | 372 | network_packet = iwl3945_is_network_packet(priv, header); |
b481de9c | 373 | |
c8b0e6e1 | 374 | #ifdef CONFIG_IWL3945_DEBUG |
bb8c093b | 375 | if (iwl3945_debug_level & IWL_DL_STATS && net_ratelimit()) |
b481de9c ZY |
376 | IWL_DEBUG_STATS |
377 | ("[%c] %d RSSI: %d Signal: %u, Noise: %u, Rate: %u\n", | |
378 | network_packet ? '*' : ' ', | |
379 | stats.channel, stats.ssi, stats.ssi, | |
380 | stats.ssi, stats.rate); | |
381 | ||
bb8c093b | 382 | if (iwl3945_debug_level & (IWL_DL_RX)) |
b481de9c | 383 | /* Set "1" to report good data frames in groups of 100 */ |
bb8c093b | 384 | iwl3945_report_frame(priv, pkt, header, 1); |
b481de9c ZY |
385 | #endif |
386 | ||
387 | if (network_packet) { | |
388 | priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp); | |
389 | priv->last_tsf = le64_to_cpu(rx_end->timestamp); | |
390 | priv->last_rx_rssi = stats.ssi; | |
391 | priv->last_rx_noise = stats.noise; | |
392 | } | |
393 | ||
394 | switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FTYPE) { | |
395 | case IEEE80211_FTYPE_MGMT: | |
396 | switch (le16_to_cpu(header->frame_control) & | |
397 | IEEE80211_FCTL_STYPE) { | |
398 | case IEEE80211_STYPE_PROBE_RESP: | |
399 | case IEEE80211_STYPE_BEACON:{ | |
400 | /* If this is a beacon or probe response for | |
401 | * our network then cache the beacon | |
402 | * timestamp */ | |
403 | if ((((priv->iw_mode == IEEE80211_IF_TYPE_STA) | |
404 | && !compare_ether_addr(header->addr2, | |
405 | priv->bssid)) || | |
406 | ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) | |
407 | && !compare_ether_addr(header->addr3, | |
408 | priv->bssid)))) { | |
409 | struct ieee80211_mgmt *mgmt = | |
410 | (struct ieee80211_mgmt *)header; | |
411 | __le32 *pos; | |
412 | pos = | |
413 | (__le32 *) & mgmt->u.beacon. | |
414 | timestamp; | |
415 | priv->timestamp0 = le32_to_cpu(pos[0]); | |
416 | priv->timestamp1 = le32_to_cpu(pos[1]); | |
417 | priv->beacon_int = le16_to_cpu( | |
418 | mgmt->u.beacon.beacon_int); | |
419 | if (priv->call_post_assoc_from_beacon && | |
420 | (priv->iw_mode == | |
421 | IEEE80211_IF_TYPE_STA)) | |
422 | queue_work(priv->workqueue, | |
423 | &priv->post_associate.work); | |
424 | ||
425 | priv->call_post_assoc_from_beacon = 0; | |
426 | } | |
427 | ||
428 | break; | |
429 | } | |
430 | ||
431 | case IEEE80211_STYPE_ACTION: | |
432 | /* TODO: Parse 802.11h frames for CSA... */ | |
433 | break; | |
434 | ||
435 | /* | |
436 | * TODO: There is no callback function from upper | |
437 | * stack to inform us when associated status. this | |
438 | * work around to sniff assoc_resp management frame | |
439 | * and finish the association process. | |
440 | */ | |
441 | case IEEE80211_STYPE_ASSOC_RESP: | |
442 | case IEEE80211_STYPE_REASSOC_RESP:{ | |
443 | struct ieee80211_mgmt *mgnt = | |
444 | (struct ieee80211_mgmt *)header; | |
445 | priv->assoc_id = (~((1 << 15) | (1 << 14)) & | |
446 | le16_to_cpu(mgnt->u. | |
447 | assoc_resp.aid)); | |
448 | priv->assoc_capability = | |
449 | le16_to_cpu(mgnt->u.assoc_resp.capab_info); | |
450 | if (priv->beacon_int) | |
451 | queue_work(priv->workqueue, | |
452 | &priv->post_associate.work); | |
453 | else | |
454 | priv->call_post_assoc_from_beacon = 1; | |
455 | break; | |
456 | } | |
457 | ||
458 | case IEEE80211_STYPE_PROBE_REQ:{ | |
0795af57 JP |
459 | DECLARE_MAC_BUF(mac1); |
460 | DECLARE_MAC_BUF(mac2); | |
461 | DECLARE_MAC_BUF(mac3); | |
b481de9c ZY |
462 | if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) |
463 | IWL_DEBUG_DROP | |
0795af57 JP |
464 | ("Dropping (non network): %s" |
465 | ", %s, %s\n", | |
466 | print_mac(mac1, header->addr1), | |
467 | print_mac(mac2, header->addr2), | |
468 | print_mac(mac3, header->addr3)); | |
b481de9c ZY |
469 | return; |
470 | } | |
471 | } | |
472 | ||
473 | iwl3945_handle_data_packet(priv, 0, rxb, &stats, phy_flags); | |
474 | break; | |
475 | ||
476 | case IEEE80211_FTYPE_CTL: | |
477 | break; | |
478 | ||
0795af57 JP |
479 | case IEEE80211_FTYPE_DATA: { |
480 | DECLARE_MAC_BUF(mac1); | |
481 | DECLARE_MAC_BUF(mac2); | |
482 | DECLARE_MAC_BUF(mac3); | |
483 | ||
bb8c093b | 484 | if (unlikely(iwl3945_is_duplicate_packet(priv, header))) |
0795af57 JP |
485 | IWL_DEBUG_DROP("Dropping (dup): %s, %s, %s\n", |
486 | print_mac(mac1, header->addr1), | |
487 | print_mac(mac2, header->addr2), | |
488 | print_mac(mac3, header->addr3)); | |
b481de9c ZY |
489 | else |
490 | iwl3945_handle_data_packet(priv, 1, rxb, &stats, | |
491 | phy_flags); | |
492 | break; | |
493 | } | |
0795af57 | 494 | } |
b481de9c ZY |
495 | } |
496 | ||
bb8c093b | 497 | int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl3945_priv *priv, void *ptr, |
b481de9c ZY |
498 | dma_addr_t addr, u16 len) |
499 | { | |
500 | int count; | |
501 | u32 pad; | |
bb8c093b | 502 | struct iwl3945_tfd_frame *tfd = (struct iwl3945_tfd_frame *)ptr; |
b481de9c ZY |
503 | |
504 | count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); | |
505 | pad = TFD_CTL_PAD_GET(le32_to_cpu(tfd->control_flags)); | |
506 | ||
507 | if ((count >= NUM_TFD_CHUNKS) || (count < 0)) { | |
508 | IWL_ERROR("Error can not send more than %d chunks\n", | |
509 | NUM_TFD_CHUNKS); | |
510 | return -EINVAL; | |
511 | } | |
512 | ||
513 | tfd->pa[count].addr = cpu_to_le32(addr); | |
514 | tfd->pa[count].len = cpu_to_le32(len); | |
515 | ||
516 | count++; | |
517 | ||
518 | tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) | | |
519 | TFD_CTL_PAD_SET(pad)); | |
520 | ||
521 | return 0; | |
522 | } | |
523 | ||
524 | /** | |
bb8c093b | 525 | * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr] |
b481de9c ZY |
526 | * |
527 | * Does NOT advance any indexes | |
528 | */ | |
bb8c093b | 529 | int iwl3945_hw_txq_free_tfd(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq) |
b481de9c | 530 | { |
bb8c093b CH |
531 | struct iwl3945_tfd_frame *bd_tmp = (struct iwl3945_tfd_frame *)&txq->bd[0]; |
532 | struct iwl3945_tfd_frame *bd = &bd_tmp[txq->q.read_ptr]; | |
b481de9c ZY |
533 | struct pci_dev *dev = priv->pci_dev; |
534 | int i; | |
535 | int counter; | |
536 | ||
537 | /* classify bd */ | |
538 | if (txq->q.id == IWL_CMD_QUEUE_NUM) | |
539 | /* nothing to cleanup after for host commands */ | |
540 | return 0; | |
541 | ||
542 | /* sanity check */ | |
543 | counter = TFD_CTL_COUNT_GET(le32_to_cpu(bd->control_flags)); | |
544 | if (counter > NUM_TFD_CHUNKS) { | |
545 | IWL_ERROR("Too many chunks: %i\n", counter); | |
546 | /* @todo issue fatal error, it is quite serious situation */ | |
547 | return 0; | |
548 | } | |
549 | ||
550 | /* unmap chunks if any */ | |
551 | ||
552 | for (i = 1; i < counter; i++) { | |
553 | pci_unmap_single(dev, le32_to_cpu(bd->pa[i].addr), | |
554 | le32_to_cpu(bd->pa[i].len), PCI_DMA_TODEVICE); | |
fc4b6853 TW |
555 | if (txq->txb[txq->q.read_ptr].skb[0]) { |
556 | struct sk_buff *skb = txq->txb[txq->q.read_ptr].skb[0]; | |
557 | if (txq->txb[txq->q.read_ptr].skb[0]) { | |
b481de9c ZY |
558 | /* Can be called from interrupt context */ |
559 | dev_kfree_skb_any(skb); | |
fc4b6853 | 560 | txq->txb[txq->q.read_ptr].skb[0] = NULL; |
b481de9c ZY |
561 | } |
562 | } | |
563 | } | |
564 | return 0; | |
565 | } | |
566 | ||
bb8c093b | 567 | u8 iwl3945_hw_find_station(struct iwl3945_priv *priv, const u8 *addr) |
b481de9c ZY |
568 | { |
569 | int i; | |
570 | int ret = IWL_INVALID_STATION; | |
571 | unsigned long flags; | |
0795af57 | 572 | DECLARE_MAC_BUF(mac); |
b481de9c ZY |
573 | |
574 | spin_lock_irqsave(&priv->sta_lock, flags); | |
575 | for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++) | |
576 | if ((priv->stations[i].used) && | |
577 | (!compare_ether_addr | |
578 | (priv->stations[i].sta.sta.addr, addr))) { | |
579 | ret = i; | |
580 | goto out; | |
581 | } | |
582 | ||
0795af57 JP |
583 | IWL_DEBUG_INFO("can not find STA %s (total %d)\n", |
584 | print_mac(mac, addr), priv->num_stations); | |
b481de9c ZY |
585 | out: |
586 | spin_unlock_irqrestore(&priv->sta_lock, flags); | |
587 | return ret; | |
588 | } | |
589 | ||
590 | /** | |
bb8c093b | 591 | * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD: |
b481de9c ZY |
592 | * |
593 | */ | |
bb8c093b CH |
594 | void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv, |
595 | struct iwl3945_cmd *cmd, | |
b481de9c ZY |
596 | struct ieee80211_tx_control *ctrl, |
597 | struct ieee80211_hdr *hdr, int sta_id, int tx_id) | |
598 | { | |
599 | unsigned long flags; | |
600 | u16 rate_index = min(ctrl->tx_rate & 0xffff, IWL_RATE_COUNT - 1); | |
601 | u16 rate_mask; | |
602 | int rate; | |
603 | u8 rts_retry_limit; | |
604 | u8 data_retry_limit; | |
605 | __le32 tx_flags; | |
606 | u16 fc = le16_to_cpu(hdr->frame_control); | |
607 | ||
bb8c093b | 608 | rate = iwl3945_rates[rate_index].plcp; |
b481de9c ZY |
609 | tx_flags = cmd->cmd.tx.tx_flags; |
610 | ||
611 | /* We need to figure out how to get the sta->supp_rates while | |
612 | * in this running context; perhaps encoding into ctrl->tx_rate? */ | |
613 | rate_mask = IWL_RATES_MASK; | |
614 | ||
615 | spin_lock_irqsave(&priv->sta_lock, flags); | |
616 | ||
617 | priv->stations[sta_id].current_rate.rate_n_flags = rate; | |
618 | ||
619 | if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && | |
620 | (sta_id != IWL3945_BROADCAST_ID) && | |
621 | (sta_id != IWL_MULTICAST_ID)) | |
622 | priv->stations[IWL_STA_ID].current_rate.rate_n_flags = rate; | |
623 | ||
624 | spin_unlock_irqrestore(&priv->sta_lock, flags); | |
625 | ||
626 | if (tx_id >= IWL_CMD_QUEUE_NUM) | |
627 | rts_retry_limit = 3; | |
628 | else | |
629 | rts_retry_limit = 7; | |
630 | ||
631 | if (ieee80211_is_probe_response(fc)) { | |
632 | data_retry_limit = 3; | |
633 | if (data_retry_limit < rts_retry_limit) | |
634 | rts_retry_limit = data_retry_limit; | |
635 | } else | |
636 | data_retry_limit = IWL_DEFAULT_TX_RETRY; | |
637 | ||
638 | if (priv->data_retry_limit != -1) | |
639 | data_retry_limit = priv->data_retry_limit; | |
640 | ||
641 | if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) { | |
642 | switch (fc & IEEE80211_FCTL_STYPE) { | |
643 | case IEEE80211_STYPE_AUTH: | |
644 | case IEEE80211_STYPE_DEAUTH: | |
645 | case IEEE80211_STYPE_ASSOC_REQ: | |
646 | case IEEE80211_STYPE_REASSOC_REQ: | |
647 | if (tx_flags & TX_CMD_FLG_RTS_MSK) { | |
648 | tx_flags &= ~TX_CMD_FLG_RTS_MSK; | |
649 | tx_flags |= TX_CMD_FLG_CTS_MSK; | |
650 | } | |
651 | break; | |
652 | default: | |
653 | break; | |
654 | } | |
655 | } | |
656 | ||
657 | cmd->cmd.tx.rts_retry_limit = rts_retry_limit; | |
658 | cmd->cmd.tx.data_retry_limit = data_retry_limit; | |
659 | cmd->cmd.tx.rate = rate; | |
660 | cmd->cmd.tx.tx_flags = tx_flags; | |
661 | ||
662 | /* OFDM */ | |
14577f23 MA |
663 | cmd->cmd.tx.supp_rates[0] = |
664 | ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF; | |
b481de9c ZY |
665 | |
666 | /* CCK */ | |
14577f23 | 667 | cmd->cmd.tx.supp_rates[1] = (rate_mask & 0xF); |
b481de9c ZY |
668 | |
669 | IWL_DEBUG_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X " | |
670 | "cck/ofdm mask: 0x%x/0x%x\n", sta_id, | |
671 | cmd->cmd.tx.rate, le32_to_cpu(cmd->cmd.tx.tx_flags), | |
672 | cmd->cmd.tx.supp_rates[1], cmd->cmd.tx.supp_rates[0]); | |
673 | } | |
674 | ||
bb8c093b | 675 | u8 iwl3945_sync_sta(struct iwl3945_priv *priv, int sta_id, u16 tx_rate, u8 flags) |
b481de9c ZY |
676 | { |
677 | unsigned long flags_spin; | |
bb8c093b | 678 | struct iwl3945_station_entry *station; |
b481de9c ZY |
679 | |
680 | if (sta_id == IWL_INVALID_STATION) | |
681 | return IWL_INVALID_STATION; | |
682 | ||
683 | spin_lock_irqsave(&priv->sta_lock, flags_spin); | |
684 | station = &priv->stations[sta_id]; | |
685 | ||
686 | station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK; | |
687 | station->sta.rate_n_flags = cpu_to_le16(tx_rate); | |
688 | station->current_rate.rate_n_flags = tx_rate; | |
689 | station->sta.mode = STA_CONTROL_MODIFY_MSK; | |
690 | ||
691 | spin_unlock_irqrestore(&priv->sta_lock, flags_spin); | |
692 | ||
bb8c093b | 693 | iwl3945_send_add_station(priv, &station->sta, flags); |
b481de9c ZY |
694 | IWL_DEBUG_RATE("SCALE sync station %d to rate %d\n", |
695 | sta_id, tx_rate); | |
696 | return sta_id; | |
697 | } | |
698 | ||
bb8c093b | 699 | static int iwl3945_nic_set_pwr_src(struct iwl3945_priv *priv, int pwr_max) |
b481de9c ZY |
700 | { |
701 | int rc; | |
702 | unsigned long flags; | |
703 | ||
704 | spin_lock_irqsave(&priv->lock, flags); | |
bb8c093b | 705 | rc = iwl3945_grab_nic_access(priv); |
b481de9c ZY |
706 | if (rc) { |
707 | spin_unlock_irqrestore(&priv->lock, flags); | |
708 | return rc; | |
709 | } | |
710 | ||
711 | if (!pwr_max) { | |
712 | u32 val; | |
713 | ||
714 | rc = pci_read_config_dword(priv->pci_dev, | |
715 | PCI_POWER_SOURCE, &val); | |
716 | if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) { | |
bb8c093b | 717 | iwl3945_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, |
b481de9c ZY |
718 | APMG_PS_CTRL_VAL_PWR_SRC_VAUX, |
719 | ~APMG_PS_CTRL_MSK_PWR_SRC); | |
bb8c093b | 720 | iwl3945_release_nic_access(priv); |
b481de9c | 721 | |
bb8c093b | 722 | iwl3945_poll_bit(priv, CSR_GPIO_IN, |
b481de9c ZY |
723 | CSR_GPIO_IN_VAL_VAUX_PWR_SRC, |
724 | CSR_GPIO_IN_BIT_AUX_POWER, 5000); | |
725 | } else | |
bb8c093b | 726 | iwl3945_release_nic_access(priv); |
b481de9c | 727 | } else { |
bb8c093b | 728 | iwl3945_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, |
b481de9c ZY |
729 | APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, |
730 | ~APMG_PS_CTRL_MSK_PWR_SRC); | |
731 | ||
bb8c093b CH |
732 | iwl3945_release_nic_access(priv); |
733 | iwl3945_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC, | |
b481de9c ZY |
734 | CSR_GPIO_IN_BIT_AUX_POWER, 5000); /* uS */ |
735 | } | |
736 | spin_unlock_irqrestore(&priv->lock, flags); | |
737 | ||
738 | return rc; | |
739 | } | |
740 | ||
bb8c093b | 741 | static int iwl3945_rx_init(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq) |
b481de9c ZY |
742 | { |
743 | int rc; | |
744 | unsigned long flags; | |
745 | ||
746 | spin_lock_irqsave(&priv->lock, flags); | |
bb8c093b | 747 | rc = iwl3945_grab_nic_access(priv); |
b481de9c ZY |
748 | if (rc) { |
749 | spin_unlock_irqrestore(&priv->lock, flags); | |
750 | return rc; | |
751 | } | |
752 | ||
bb8c093b CH |
753 | iwl3945_write_direct32(priv, FH_RCSR_RBD_BASE(0), rxq->dma_addr); |
754 | iwl3945_write_direct32(priv, FH_RCSR_RPTR_ADDR(0), | |
b481de9c | 755 | priv->hw_setting.shared_phys + |
bb8c093b CH |
756 | offsetof(struct iwl3945_shared, rx_read_ptr[0])); |
757 | iwl3945_write_direct32(priv, FH_RCSR_WPTR(0), 0); | |
758 | iwl3945_write_direct32(priv, FH_RCSR_CONFIG(0), | |
b481de9c ZY |
759 | ALM_FH_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE | |
760 | ALM_FH_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE | | |
761 | ALM_FH_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN | | |
762 | ALM_FH_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | | |
763 | (RX_QUEUE_SIZE_LOG << ALM_FH_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) | | |
764 | ALM_FH_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | | |
765 | (1 << ALM_FH_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) | | |
766 | ALM_FH_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH); | |
767 | ||
768 | /* fake read to flush all prev I/O */ | |
bb8c093b | 769 | iwl3945_read_direct32(priv, FH_RSSR_CTRL); |
b481de9c | 770 | |
bb8c093b | 771 | iwl3945_release_nic_access(priv); |
b481de9c ZY |
772 | spin_unlock_irqrestore(&priv->lock, flags); |
773 | ||
774 | return 0; | |
775 | } | |
776 | ||
bb8c093b | 777 | static int iwl3945_tx_reset(struct iwl3945_priv *priv) |
b481de9c ZY |
778 | { |
779 | int rc; | |
780 | unsigned long flags; | |
781 | ||
782 | spin_lock_irqsave(&priv->lock, flags); | |
bb8c093b | 783 | rc = iwl3945_grab_nic_access(priv); |
b481de9c ZY |
784 | if (rc) { |
785 | spin_unlock_irqrestore(&priv->lock, flags); | |
786 | return rc; | |
787 | } | |
788 | ||
789 | /* bypass mode */ | |
bb8c093b | 790 | iwl3945_write_prph(priv, ALM_SCD_MODE_REG, 0x2); |
b481de9c ZY |
791 | |
792 | /* RA 0 is active */ | |
bb8c093b | 793 | iwl3945_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01); |
b481de9c ZY |
794 | |
795 | /* all 6 fifo are active */ | |
bb8c093b | 796 | iwl3945_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f); |
b481de9c | 797 | |
bb8c093b CH |
798 | iwl3945_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000); |
799 | iwl3945_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002); | |
800 | iwl3945_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004); | |
801 | iwl3945_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005); | |
b481de9c | 802 | |
bb8c093b | 803 | iwl3945_write_direct32(priv, FH_TSSR_CBB_BASE, |
b481de9c ZY |
804 | priv->hw_setting.shared_phys); |
805 | ||
bb8c093b | 806 | iwl3945_write_direct32(priv, FH_TSSR_MSG_CONFIG, |
b481de9c ZY |
807 | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON | |
808 | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON | | |
809 | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B | | |
810 | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON | | |
811 | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON | | |
812 | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH | | |
813 | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH); | |
814 | ||
bb8c093b | 815 | iwl3945_release_nic_access(priv); |
b481de9c ZY |
816 | spin_unlock_irqrestore(&priv->lock, flags); |
817 | ||
818 | return 0; | |
819 | } | |
820 | ||
821 | /** | |
822 | * iwl3945_txq_ctx_reset - Reset TX queue context | |
823 | * | |
824 | * Destroys all DMA structures and initialize them again | |
825 | */ | |
bb8c093b | 826 | static int iwl3945_txq_ctx_reset(struct iwl3945_priv *priv) |
b481de9c ZY |
827 | { |
828 | int rc; | |
829 | int txq_id, slots_num; | |
830 | ||
bb8c093b | 831 | iwl3945_hw_txq_ctx_free(priv); |
b481de9c ZY |
832 | |
833 | /* Tx CMD queue */ | |
834 | rc = iwl3945_tx_reset(priv); | |
835 | if (rc) | |
836 | goto error; | |
837 | ||
838 | /* Tx queue(s) */ | |
839 | for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) { | |
840 | slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ? | |
841 | TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; | |
bb8c093b | 842 | rc = iwl3945_tx_queue_init(priv, &priv->txq[txq_id], slots_num, |
b481de9c ZY |
843 | txq_id); |
844 | if (rc) { | |
845 | IWL_ERROR("Tx %d queue init failed\n", txq_id); | |
846 | goto error; | |
847 | } | |
848 | } | |
849 | ||
850 | return rc; | |
851 | ||
852 | error: | |
bb8c093b | 853 | iwl3945_hw_txq_ctx_free(priv); |
b481de9c ZY |
854 | return rc; |
855 | } | |
856 | ||
bb8c093b | 857 | int iwl3945_hw_nic_init(struct iwl3945_priv *priv) |
b481de9c ZY |
858 | { |
859 | u8 rev_id; | |
860 | int rc; | |
861 | unsigned long flags; | |
bb8c093b | 862 | struct iwl3945_rx_queue *rxq = &priv->rxq; |
b481de9c | 863 | |
bb8c093b | 864 | iwl3945_power_init_handle(priv); |
b481de9c ZY |
865 | |
866 | spin_lock_irqsave(&priv->lock, flags); | |
bb8c093b CH |
867 | iwl3945_set_bit(priv, CSR_ANA_PLL_CFG, (1 << 24)); |
868 | iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, | |
b481de9c ZY |
869 | CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); |
870 | ||
bb8c093b CH |
871 | iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); |
872 | rc = iwl3945_poll_bit(priv, CSR_GP_CNTRL, | |
b481de9c ZY |
873 | CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, |
874 | CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); | |
875 | if (rc < 0) { | |
876 | spin_unlock_irqrestore(&priv->lock, flags); | |
877 | IWL_DEBUG_INFO("Failed to init the card\n"); | |
878 | return rc; | |
879 | } | |
880 | ||
bb8c093b | 881 | rc = iwl3945_grab_nic_access(priv); |
b481de9c ZY |
882 | if (rc) { |
883 | spin_unlock_irqrestore(&priv->lock, flags); | |
884 | return rc; | |
885 | } | |
bb8c093b | 886 | iwl3945_write_prph(priv, APMG_CLK_EN_REG, |
b481de9c ZY |
887 | APMG_CLK_VAL_DMA_CLK_RQT | |
888 | APMG_CLK_VAL_BSM_CLK_RQT); | |
889 | udelay(20); | |
bb8c093b | 890 | iwl3945_set_bits_prph(priv, APMG_PCIDEV_STT_REG, |
b481de9c | 891 | APMG_PCIDEV_STT_VAL_L1_ACT_DIS); |
bb8c093b | 892 | iwl3945_release_nic_access(priv); |
b481de9c ZY |
893 | spin_unlock_irqrestore(&priv->lock, flags); |
894 | ||
895 | /* Determine HW type */ | |
896 | rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id); | |
897 | if (rc) | |
898 | return rc; | |
899 | IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id); | |
900 | ||
901 | iwl3945_nic_set_pwr_src(priv, 1); | |
902 | spin_lock_irqsave(&priv->lock, flags); | |
903 | ||
904 | if (rev_id & PCI_CFG_REV_ID_BIT_RTP) | |
905 | IWL_DEBUG_INFO("RTP type \n"); | |
906 | else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) { | |
907 | IWL_DEBUG_INFO("ALM-MB type\n"); | |
bb8c093b | 908 | iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, |
b481de9c ZY |
909 | CSR_HW_IF_CONFIG_REG_BIT_ALMAGOR_MB); |
910 | } else { | |
911 | IWL_DEBUG_INFO("ALM-MM type\n"); | |
bb8c093b | 912 | iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, |
b481de9c ZY |
913 | CSR_HW_IF_CONFIG_REG_BIT_ALMAGOR_MM); |
914 | } | |
915 | ||
916 | spin_unlock_irqrestore(&priv->lock, flags); | |
917 | ||
918 | /* Initialize the EEPROM */ | |
bb8c093b | 919 | rc = iwl3945_eeprom_init(priv); |
b481de9c ZY |
920 | if (rc) |
921 | return rc; | |
922 | ||
923 | spin_lock_irqsave(&priv->lock, flags); | |
924 | if (EEPROM_SKU_CAP_OP_MODE_MRC == priv->eeprom.sku_cap) { | |
925 | IWL_DEBUG_INFO("SKU OP mode is mrc\n"); | |
bb8c093b | 926 | iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, |
b481de9c ZY |
927 | CSR_HW_IF_CONFIG_REG_BIT_SKU_MRC); |
928 | } else | |
929 | IWL_DEBUG_INFO("SKU OP mode is basic\n"); | |
930 | ||
931 | if ((priv->eeprom.board_revision & 0xF0) == 0xD0) { | |
932 | IWL_DEBUG_INFO("3945ABG revision is 0x%X\n", | |
933 | priv->eeprom.board_revision); | |
bb8c093b | 934 | iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, |
b481de9c ZY |
935 | CSR_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); |
936 | } else { | |
937 | IWL_DEBUG_INFO("3945ABG revision is 0x%X\n", | |
938 | priv->eeprom.board_revision); | |
bb8c093b | 939 | iwl3945_clear_bit(priv, CSR_HW_IF_CONFIG_REG, |
b481de9c ZY |
940 | CSR_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); |
941 | } | |
942 | ||
943 | if (priv->eeprom.almgor_m_version <= 1) { | |
bb8c093b | 944 | iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, |
b481de9c ZY |
945 | CSR_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A); |
946 | IWL_DEBUG_INFO("Card M type A version is 0x%X\n", | |
947 | priv->eeprom.almgor_m_version); | |
948 | } else { | |
949 | IWL_DEBUG_INFO("Card M type B version is 0x%X\n", | |
950 | priv->eeprom.almgor_m_version); | |
bb8c093b | 951 | iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG, |
b481de9c ZY |
952 | CSR_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B); |
953 | } | |
954 | spin_unlock_irqrestore(&priv->lock, flags); | |
955 | ||
956 | if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE) | |
957 | IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n"); | |
958 | ||
959 | if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE) | |
960 | IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n"); | |
961 | ||
962 | /* Allocate the RX queue, or reset if it is already allocated */ | |
963 | if (!rxq->bd) { | |
bb8c093b | 964 | rc = iwl3945_rx_queue_alloc(priv); |
b481de9c ZY |
965 | if (rc) { |
966 | IWL_ERROR("Unable to initialize Rx queue\n"); | |
967 | return -ENOMEM; | |
968 | } | |
969 | } else | |
bb8c093b | 970 | iwl3945_rx_queue_reset(priv, rxq); |
b481de9c | 971 | |
bb8c093b | 972 | iwl3945_rx_replenish(priv); |
b481de9c ZY |
973 | |
974 | iwl3945_rx_init(priv, rxq); | |
975 | ||
976 | spin_lock_irqsave(&priv->lock, flags); | |
977 | ||
978 | /* Look at using this instead: | |
979 | rxq->need_update = 1; | |
bb8c093b | 980 | iwl3945_rx_queue_update_write_ptr(priv, rxq); |
b481de9c ZY |
981 | */ |
982 | ||
bb8c093b | 983 | rc = iwl3945_grab_nic_access(priv); |
b481de9c ZY |
984 | if (rc) { |
985 | spin_unlock_irqrestore(&priv->lock, flags); | |
986 | return rc; | |
987 | } | |
bb8c093b CH |
988 | iwl3945_write_direct32(priv, FH_RCSR_WPTR(0), rxq->write & ~7); |
989 | iwl3945_release_nic_access(priv); | |
b481de9c ZY |
990 | |
991 | spin_unlock_irqrestore(&priv->lock, flags); | |
992 | ||
993 | rc = iwl3945_txq_ctx_reset(priv); | |
994 | if (rc) | |
995 | return rc; | |
996 | ||
997 | set_bit(STATUS_INIT, &priv->status); | |
998 | ||
999 | return 0; | |
1000 | } | |
1001 | ||
1002 | /** | |
bb8c093b | 1003 | * iwl3945_hw_txq_ctx_free - Free TXQ Context |
b481de9c ZY |
1004 | * |
1005 | * Destroy all TX DMA queues and structures | |
1006 | */ | |
bb8c093b | 1007 | void iwl3945_hw_txq_ctx_free(struct iwl3945_priv *priv) |
b481de9c ZY |
1008 | { |
1009 | int txq_id; | |
1010 | ||
1011 | /* Tx queues */ | |
1012 | for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) | |
bb8c093b | 1013 | iwl3945_tx_queue_free(priv, &priv->txq[txq_id]); |
b481de9c ZY |
1014 | } |
1015 | ||
bb8c093b | 1016 | void iwl3945_hw_txq_ctx_stop(struct iwl3945_priv *priv) |
b481de9c ZY |
1017 | { |
1018 | int queue; | |
1019 | unsigned long flags; | |
1020 | ||
1021 | spin_lock_irqsave(&priv->lock, flags); | |
bb8c093b | 1022 | if (iwl3945_grab_nic_access(priv)) { |
b481de9c | 1023 | spin_unlock_irqrestore(&priv->lock, flags); |
bb8c093b | 1024 | iwl3945_hw_txq_ctx_free(priv); |
b481de9c ZY |
1025 | return; |
1026 | } | |
1027 | ||
1028 | /* stop SCD */ | |
bb8c093b | 1029 | iwl3945_write_prph(priv, ALM_SCD_MODE_REG, 0); |
b481de9c ZY |
1030 | |
1031 | /* reset TFD queues */ | |
1032 | for (queue = TFD_QUEUE_MIN; queue < TFD_QUEUE_MAX; queue++) { | |
bb8c093b CH |
1033 | iwl3945_write_direct32(priv, FH_TCSR_CONFIG(queue), 0x0); |
1034 | iwl3945_poll_direct_bit(priv, FH_TSSR_TX_STATUS, | |
b481de9c ZY |
1035 | ALM_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(queue), |
1036 | 1000); | |
1037 | } | |
1038 | ||
bb8c093b | 1039 | iwl3945_release_nic_access(priv); |
b481de9c ZY |
1040 | spin_unlock_irqrestore(&priv->lock, flags); |
1041 | ||
bb8c093b | 1042 | iwl3945_hw_txq_ctx_free(priv); |
b481de9c ZY |
1043 | } |
1044 | ||
bb8c093b | 1045 | int iwl3945_hw_nic_stop_master(struct iwl3945_priv *priv) |
b481de9c ZY |
1046 | { |
1047 | int rc = 0; | |
1048 | u32 reg_val; | |
1049 | unsigned long flags; | |
1050 | ||
1051 | spin_lock_irqsave(&priv->lock, flags); | |
1052 | ||
1053 | /* set stop master bit */ | |
bb8c093b | 1054 | iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); |
b481de9c | 1055 | |
bb8c093b | 1056 | reg_val = iwl3945_read32(priv, CSR_GP_CNTRL); |
b481de9c ZY |
1057 | |
1058 | if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE == | |
1059 | (reg_val & CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE)) | |
1060 | IWL_DEBUG_INFO("Card in power save, master is already " | |
1061 | "stopped\n"); | |
1062 | else { | |
bb8c093b | 1063 | rc = iwl3945_poll_bit(priv, CSR_RESET, |
b481de9c ZY |
1064 | CSR_RESET_REG_FLAG_MASTER_DISABLED, |
1065 | CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); | |
1066 | if (rc < 0) { | |
1067 | spin_unlock_irqrestore(&priv->lock, flags); | |
1068 | return rc; | |
1069 | } | |
1070 | } | |
1071 | ||
1072 | spin_unlock_irqrestore(&priv->lock, flags); | |
1073 | IWL_DEBUG_INFO("stop master\n"); | |
1074 | ||
1075 | return rc; | |
1076 | } | |
1077 | ||
bb8c093b | 1078 | int iwl3945_hw_nic_reset(struct iwl3945_priv *priv) |
b481de9c ZY |
1079 | { |
1080 | int rc; | |
1081 | unsigned long flags; | |
1082 | ||
bb8c093b | 1083 | iwl3945_hw_nic_stop_master(priv); |
b481de9c ZY |
1084 | |
1085 | spin_lock_irqsave(&priv->lock, flags); | |
1086 | ||
bb8c093b | 1087 | iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); |
b481de9c | 1088 | |
bb8c093b | 1089 | rc = iwl3945_poll_bit(priv, CSR_GP_CNTRL, |
b481de9c ZY |
1090 | CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, |
1091 | CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); | |
1092 | ||
bb8c093b | 1093 | rc = iwl3945_grab_nic_access(priv); |
b481de9c | 1094 | if (!rc) { |
bb8c093b | 1095 | iwl3945_write_prph(priv, APMG_CLK_CTRL_REG, |
b481de9c ZY |
1096 | APMG_CLK_VAL_BSM_CLK_RQT); |
1097 | ||
1098 | udelay(10); | |
1099 | ||
bb8c093b | 1100 | iwl3945_set_bit(priv, CSR_GP_CNTRL, |
b481de9c ZY |
1101 | CSR_GP_CNTRL_REG_FLAG_INIT_DONE); |
1102 | ||
bb8c093b CH |
1103 | iwl3945_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0); |
1104 | iwl3945_write_prph(priv, APMG_RTC_INT_STT_REG, | |
b481de9c ZY |
1105 | 0xFFFFFFFF); |
1106 | ||
1107 | /* enable DMA */ | |
bb8c093b | 1108 | iwl3945_write_prph(priv, APMG_CLK_EN_REG, |
b481de9c ZY |
1109 | APMG_CLK_VAL_DMA_CLK_RQT | |
1110 | APMG_CLK_VAL_BSM_CLK_RQT); | |
1111 | udelay(10); | |
1112 | ||
bb8c093b | 1113 | iwl3945_set_bits_prph(priv, APMG_PS_CTRL_REG, |
b481de9c ZY |
1114 | APMG_PS_CTRL_VAL_RESET_REQ); |
1115 | udelay(5); | |
bb8c093b | 1116 | iwl3945_clear_bits_prph(priv, APMG_PS_CTRL_REG, |
b481de9c | 1117 | APMG_PS_CTRL_VAL_RESET_REQ); |
bb8c093b | 1118 | iwl3945_release_nic_access(priv); |
b481de9c ZY |
1119 | } |
1120 | ||
1121 | /* Clear the 'host command active' bit... */ | |
1122 | clear_bit(STATUS_HCMD_ACTIVE, &priv->status); | |
1123 | ||
1124 | wake_up_interruptible(&priv->wait_command_queue); | |
1125 | spin_unlock_irqrestore(&priv->lock, flags); | |
1126 | ||
1127 | return rc; | |
1128 | } | |
1129 | ||
1130 | /** | |
bb8c093b | 1131 | * iwl3945_hw_reg_adjust_power_by_temp |
bbc5807b IS |
1132 | * return index delta into power gain settings table |
1133 | */ | |
bb8c093b | 1134 | static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) |
b481de9c ZY |
1135 | { |
1136 | return (new_reading - old_reading) * (-11) / 100; | |
1137 | } | |
1138 | ||
1139 | /** | |
bb8c093b | 1140 | * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range |
b481de9c | 1141 | */ |
bb8c093b | 1142 | static inline int iwl3945_hw_reg_temp_out_of_range(int temperature) |
b481de9c ZY |
1143 | { |
1144 | return (((temperature < -260) || (temperature > 25)) ? 1 : 0); | |
1145 | } | |
1146 | ||
bb8c093b | 1147 | int iwl3945_hw_get_temperature(struct iwl3945_priv *priv) |
b481de9c | 1148 | { |
bb8c093b | 1149 | return iwl3945_read32(priv, CSR_UCODE_DRV_GP2); |
b481de9c ZY |
1150 | } |
1151 | ||
1152 | /** | |
bb8c093b | 1153 | * iwl3945_hw_reg_txpower_get_temperature |
bbc5807b IS |
1154 | * get the current temperature by reading from NIC |
1155 | */ | |
bb8c093b | 1156 | static int iwl3945_hw_reg_txpower_get_temperature(struct iwl3945_priv *priv) |
b481de9c ZY |
1157 | { |
1158 | int temperature; | |
1159 | ||
bb8c093b | 1160 | temperature = iwl3945_hw_get_temperature(priv); |
b481de9c ZY |
1161 | |
1162 | /* driver's okay range is -260 to +25. | |
1163 | * human readable okay range is 0 to +285 */ | |
1164 | IWL_DEBUG_INFO("Temperature: %d\n", temperature + IWL_TEMP_CONVERT); | |
1165 | ||
1166 | /* handle insane temp reading */ | |
bb8c093b | 1167 | if (iwl3945_hw_reg_temp_out_of_range(temperature)) { |
b481de9c ZY |
1168 | IWL_ERROR("Error bad temperature value %d\n", temperature); |
1169 | ||
1170 | /* if really really hot(?), | |
1171 | * substitute the 3rd band/group's temp measured at factory */ | |
1172 | if (priv->last_temperature > 100) | |
1173 | temperature = priv->eeprom.groups[2].temperature; | |
1174 | else /* else use most recent "sane" value from driver */ | |
1175 | temperature = priv->last_temperature; | |
1176 | } | |
1177 | ||
1178 | return temperature; /* raw, not "human readable" */ | |
1179 | } | |
1180 | ||
1181 | /* Adjust Txpower only if temperature variance is greater than threshold. | |
1182 | * | |
1183 | * Both are lower than older versions' 9 degrees */ | |
1184 | #define IWL_TEMPERATURE_LIMIT_TIMER 6 | |
1185 | ||
1186 | /** | |
1187 | * is_temp_calib_needed - determines if new calibration is needed | |
1188 | * | |
1189 | * records new temperature in tx_mgr->temperature. | |
1190 | * replaces tx_mgr->last_temperature *only* if calib needed | |
1191 | * (assumes caller will actually do the calibration!). */ | |
bb8c093b | 1192 | static int is_temp_calib_needed(struct iwl3945_priv *priv) |
b481de9c ZY |
1193 | { |
1194 | int temp_diff; | |
1195 | ||
bb8c093b | 1196 | priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv); |
b481de9c ZY |
1197 | temp_diff = priv->temperature - priv->last_temperature; |
1198 | ||
1199 | /* get absolute value */ | |
1200 | if (temp_diff < 0) { | |
1201 | IWL_DEBUG_POWER("Getting cooler, delta %d,\n", temp_diff); | |
1202 | temp_diff = -temp_diff; | |
1203 | } else if (temp_diff == 0) | |
1204 | IWL_DEBUG_POWER("Same temp,\n"); | |
1205 | else | |
1206 | IWL_DEBUG_POWER("Getting warmer, delta %d,\n", temp_diff); | |
1207 | ||
1208 | /* if we don't need calibration, *don't* update last_temperature */ | |
1209 | if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) { | |
1210 | IWL_DEBUG_POWER("Timed thermal calib not needed\n"); | |
1211 | return 0; | |
1212 | } | |
1213 | ||
1214 | IWL_DEBUG_POWER("Timed thermal calib needed\n"); | |
1215 | ||
1216 | /* assume that caller will actually do calib ... | |
1217 | * update the "last temperature" value */ | |
1218 | priv->last_temperature = priv->temperature; | |
1219 | return 1; | |
1220 | } | |
1221 | ||
1222 | #define IWL_MAX_GAIN_ENTRIES 78 | |
1223 | #define IWL_CCK_FROM_OFDM_POWER_DIFF -5 | |
1224 | #define IWL_CCK_FROM_OFDM_INDEX_DIFF (10) | |
1225 | ||
1226 | /* radio and DSP power table, each step is 1/2 dB. | |
1227 | * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */ | |
bb8c093b | 1228 | static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = { |
b481de9c ZY |
1229 | { |
1230 | {251, 127}, /* 2.4 GHz, highest power */ | |
1231 | {251, 127}, | |
1232 | {251, 127}, | |
1233 | {251, 127}, | |
1234 | {251, 125}, | |
1235 | {251, 110}, | |
1236 | {251, 105}, | |
1237 | {251, 98}, | |
1238 | {187, 125}, | |
1239 | {187, 115}, | |
1240 | {187, 108}, | |
1241 | {187, 99}, | |
1242 | {243, 119}, | |
1243 | {243, 111}, | |
1244 | {243, 105}, | |
1245 | {243, 97}, | |
1246 | {243, 92}, | |
1247 | {211, 106}, | |
1248 | {211, 100}, | |
1249 | {179, 120}, | |
1250 | {179, 113}, | |
1251 | {179, 107}, | |
1252 | {147, 125}, | |
1253 | {147, 119}, | |
1254 | {147, 112}, | |
1255 | {147, 106}, | |
1256 | {147, 101}, | |
1257 | {147, 97}, | |
1258 | {147, 91}, | |
1259 | {115, 107}, | |
1260 | {235, 121}, | |
1261 | {235, 115}, | |
1262 | {235, 109}, | |
1263 | {203, 127}, | |
1264 | {203, 121}, | |
1265 | {203, 115}, | |
1266 | {203, 108}, | |
1267 | {203, 102}, | |
1268 | {203, 96}, | |
1269 | {203, 92}, | |
1270 | {171, 110}, | |
1271 | {171, 104}, | |
1272 | {171, 98}, | |
1273 | {139, 116}, | |
1274 | {227, 125}, | |
1275 | {227, 119}, | |
1276 | {227, 113}, | |
1277 | {227, 107}, | |
1278 | {227, 101}, | |
1279 | {227, 96}, | |
1280 | {195, 113}, | |
1281 | {195, 106}, | |
1282 | {195, 102}, | |
1283 | {195, 95}, | |
1284 | {163, 113}, | |
1285 | {163, 106}, | |
1286 | {163, 102}, | |
1287 | {163, 95}, | |
1288 | {131, 113}, | |
1289 | {131, 106}, | |
1290 | {131, 102}, | |
1291 | {131, 95}, | |
1292 | {99, 113}, | |
1293 | {99, 106}, | |
1294 | {99, 102}, | |
1295 | {99, 95}, | |
1296 | {67, 113}, | |
1297 | {67, 106}, | |
1298 | {67, 102}, | |
1299 | {67, 95}, | |
1300 | {35, 113}, | |
1301 | {35, 106}, | |
1302 | {35, 102}, | |
1303 | {35, 95}, | |
1304 | {3, 113}, | |
1305 | {3, 106}, | |
1306 | {3, 102}, | |
1307 | {3, 95} }, /* 2.4 GHz, lowest power */ | |
1308 | { | |
1309 | {251, 127}, /* 5.x GHz, highest power */ | |
1310 | {251, 120}, | |
1311 | {251, 114}, | |
1312 | {219, 119}, | |
1313 | {219, 101}, | |
1314 | {187, 113}, | |
1315 | {187, 102}, | |
1316 | {155, 114}, | |
1317 | {155, 103}, | |
1318 | {123, 117}, | |
1319 | {123, 107}, | |
1320 | {123, 99}, | |
1321 | {123, 92}, | |
1322 | {91, 108}, | |
1323 | {59, 125}, | |
1324 | {59, 118}, | |
1325 | {59, 109}, | |
1326 | {59, 102}, | |
1327 | {59, 96}, | |
1328 | {59, 90}, | |
1329 | {27, 104}, | |
1330 | {27, 98}, | |
1331 | {27, 92}, | |
1332 | {115, 118}, | |
1333 | {115, 111}, | |
1334 | {115, 104}, | |
1335 | {83, 126}, | |
1336 | {83, 121}, | |
1337 | {83, 113}, | |
1338 | {83, 105}, | |
1339 | {83, 99}, | |
1340 | {51, 118}, | |
1341 | {51, 111}, | |
1342 | {51, 104}, | |
1343 | {51, 98}, | |
1344 | {19, 116}, | |
1345 | {19, 109}, | |
1346 | {19, 102}, | |
1347 | {19, 98}, | |
1348 | {19, 93}, | |
1349 | {171, 113}, | |
1350 | {171, 107}, | |
1351 | {171, 99}, | |
1352 | {139, 120}, | |
1353 | {139, 113}, | |
1354 | {139, 107}, | |
1355 | {139, 99}, | |
1356 | {107, 120}, | |
1357 | {107, 113}, | |
1358 | {107, 107}, | |
1359 | {107, 99}, | |
1360 | {75, 120}, | |
1361 | {75, 113}, | |
1362 | {75, 107}, | |
1363 | {75, 99}, | |
1364 | {43, 120}, | |
1365 | {43, 113}, | |
1366 | {43, 107}, | |
1367 | {43, 99}, | |
1368 | {11, 120}, | |
1369 | {11, 113}, | |
1370 | {11, 107}, | |
1371 | {11, 99}, | |
1372 | {131, 107}, | |
1373 | {131, 99}, | |
1374 | {99, 120}, | |
1375 | {99, 113}, | |
1376 | {99, 107}, | |
1377 | {99, 99}, | |
1378 | {67, 120}, | |
1379 | {67, 113}, | |
1380 | {67, 107}, | |
1381 | {67, 99}, | |
1382 | {35, 120}, | |
1383 | {35, 113}, | |
1384 | {35, 107}, | |
1385 | {35, 99}, | |
1386 | {3, 120} } /* 5.x GHz, lowest power */ | |
1387 | }; | |
1388 | ||
bb8c093b | 1389 | static inline u8 iwl3945_hw_reg_fix_power_index(int index) |
b481de9c ZY |
1390 | { |
1391 | if (index < 0) | |
1392 | return 0; | |
1393 | if (index >= IWL_MAX_GAIN_ENTRIES) | |
1394 | return IWL_MAX_GAIN_ENTRIES - 1; | |
1395 | return (u8) index; | |
1396 | } | |
1397 | ||
1398 | /* Kick off thermal recalibration check every 60 seconds */ | |
1399 | #define REG_RECALIB_PERIOD (60) | |
1400 | ||
1401 | /** | |
bb8c093b | 1402 | * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests |
b481de9c ZY |
1403 | * |
1404 | * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK) | |
1405 | * or 6 Mbit (OFDM) rates. | |
1406 | */ | |
bb8c093b | 1407 | static void iwl3945_hw_reg_set_scan_power(struct iwl3945_priv *priv, u32 scan_tbl_index, |
b481de9c | 1408 | s32 rate_index, const s8 *clip_pwrs, |
bb8c093b | 1409 | struct iwl3945_channel_info *ch_info, |
b481de9c ZY |
1410 | int band_index) |
1411 | { | |
bb8c093b | 1412 | struct iwl3945_scan_power_info *scan_power_info; |
b481de9c ZY |
1413 | s8 power; |
1414 | u8 power_index; | |
1415 | ||
1416 | scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index]; | |
1417 | ||
1418 | /* use this channel group's 6Mbit clipping/saturation pwr, | |
1419 | * but cap at regulatory scan power restriction (set during init | |
1420 | * based on eeprom channel data) for this channel. */ | |
14577f23 | 1421 | power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]); |
b481de9c ZY |
1422 | |
1423 | /* further limit to user's max power preference. | |
1424 | * FIXME: Other spectrum management power limitations do not | |
1425 | * seem to apply?? */ | |
1426 | power = min(power, priv->user_txpower_limit); | |
1427 | scan_power_info->requested_power = power; | |
1428 | ||
1429 | /* find difference between new scan *power* and current "normal" | |
1430 | * Tx *power* for 6Mb. Use this difference (x2) to adjust the | |
1431 | * current "normal" temperature-compensated Tx power *index* for | |
1432 | * this rate (1Mb or 6Mb) to yield new temp-compensated scan power | |
1433 | * *index*. */ | |
1434 | power_index = ch_info->power_info[rate_index].power_table_index | |
1435 | - (power - ch_info->power_info | |
14577f23 | 1436 | [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2; |
b481de9c ZY |
1437 | |
1438 | /* store reference index that we use when adjusting *all* scan | |
1439 | * powers. So we can accommodate user (all channel) or spectrum | |
1440 | * management (single channel) power changes "between" temperature | |
1441 | * feedback compensation procedures. | |
1442 | * don't force fit this reference index into gain table; it may be a | |
1443 | * negative number. This will help avoid errors when we're at | |
1444 | * the lower bounds (highest gains, for warmest temperatures) | |
1445 | * of the table. */ | |
1446 | ||
1447 | /* don't exceed table bounds for "real" setting */ | |
bb8c093b | 1448 | power_index = iwl3945_hw_reg_fix_power_index(power_index); |
b481de9c ZY |
1449 | |
1450 | scan_power_info->power_table_index = power_index; | |
1451 | scan_power_info->tpc.tx_gain = | |
1452 | power_gain_table[band_index][power_index].tx_gain; | |
1453 | scan_power_info->tpc.dsp_atten = | |
1454 | power_gain_table[band_index][power_index].dsp_atten; | |
1455 | } | |
1456 | ||
1457 | /** | |
bb8c093b | 1458 | * iwl3945_hw_reg_send_txpower - fill in Tx Power command with gain settings |
b481de9c ZY |
1459 | * |
1460 | * Configures power settings for all rates for the current channel, | |
1461 | * using values from channel info struct, and send to NIC | |
1462 | */ | |
bb8c093b | 1463 | int iwl3945_hw_reg_send_txpower(struct iwl3945_priv *priv) |
b481de9c | 1464 | { |
14577f23 | 1465 | int rate_idx, i; |
bb8c093b CH |
1466 | const struct iwl3945_channel_info *ch_info = NULL; |
1467 | struct iwl3945_txpowertable_cmd txpower = { | |
b481de9c ZY |
1468 | .channel = priv->active_rxon.channel, |
1469 | }; | |
1470 | ||
1471 | txpower.band = (priv->phymode == MODE_IEEE80211A) ? 0 : 1; | |
bb8c093b | 1472 | ch_info = iwl3945_get_channel_info(priv, |
b481de9c ZY |
1473 | priv->phymode, |
1474 | le16_to_cpu(priv->active_rxon.channel)); | |
1475 | if (!ch_info) { | |
1476 | IWL_ERROR | |
1477 | ("Failed to get channel info for channel %d [%d]\n", | |
1478 | le16_to_cpu(priv->active_rxon.channel), priv->phymode); | |
1479 | return -EINVAL; | |
1480 | } | |
1481 | ||
1482 | if (!is_channel_valid(ch_info)) { | |
1483 | IWL_DEBUG_POWER("Not calling TX_PWR_TABLE_CMD on " | |
1484 | "non-Tx channel.\n"); | |
1485 | return 0; | |
1486 | } | |
1487 | ||
1488 | /* fill cmd with power settings for all rates for current channel */ | |
14577f23 MA |
1489 | /* Fill OFDM rate */ |
1490 | for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0; | |
1491 | rate_idx <= IWL_LAST_OFDM_RATE; rate_idx++, i++) { | |
1492 | ||
1493 | txpower.power[i].tpc = ch_info->power_info[i].tpc; | |
bb8c093b | 1494 | txpower.power[i].rate = iwl3945_rates[rate_idx].plcp; |
b481de9c ZY |
1495 | |
1496 | IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", | |
1497 | le16_to_cpu(txpower.channel), | |
1498 | txpower.band, | |
14577f23 MA |
1499 | txpower.power[i].tpc.tx_gain, |
1500 | txpower.power[i].tpc.dsp_atten, | |
1501 | txpower.power[i].rate); | |
1502 | } | |
1503 | /* Fill CCK rates */ | |
1504 | for (rate_idx = IWL_FIRST_CCK_RATE; | |
1505 | rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) { | |
1506 | txpower.power[i].tpc = ch_info->power_info[i].tpc; | |
bb8c093b | 1507 | txpower.power[i].rate = iwl3945_rates[rate_idx].plcp; |
14577f23 MA |
1508 | |
1509 | IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", | |
1510 | le16_to_cpu(txpower.channel), | |
1511 | txpower.band, | |
1512 | txpower.power[i].tpc.tx_gain, | |
1513 | txpower.power[i].tpc.dsp_atten, | |
1514 | txpower.power[i].rate); | |
b481de9c ZY |
1515 | } |
1516 | ||
bb8c093b CH |
1517 | return iwl3945_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, |
1518 | sizeof(struct iwl3945_txpowertable_cmd), &txpower); | |
b481de9c ZY |
1519 | |
1520 | } | |
1521 | ||
1522 | /** | |
bb8c093b | 1523 | * iwl3945_hw_reg_set_new_power - Configures power tables at new levels |
b481de9c ZY |
1524 | * @ch_info: Channel to update. Uses power_info.requested_power. |
1525 | * | |
1526 | * Replace requested_power and base_power_index ch_info fields for | |
1527 | * one channel. | |
1528 | * | |
1529 | * Called if user or spectrum management changes power preferences. | |
1530 | * Takes into account h/w and modulation limitations (clip power). | |
1531 | * | |
1532 | * This does *not* send anything to NIC, just sets up ch_info for one channel. | |
1533 | * | |
1534 | * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to | |
1535 | * properly fill out the scan powers, and actual h/w gain settings, | |
1536 | * and send changes to NIC | |
1537 | */ | |
bb8c093b CH |
1538 | static int iwl3945_hw_reg_set_new_power(struct iwl3945_priv *priv, |
1539 | struct iwl3945_channel_info *ch_info) | |
b481de9c | 1540 | { |
bb8c093b | 1541 | struct iwl3945_channel_power_info *power_info; |
b481de9c ZY |
1542 | int power_changed = 0; |
1543 | int i; | |
1544 | const s8 *clip_pwrs; | |
1545 | int power; | |
1546 | ||
1547 | /* Get this chnlgrp's rate-to-max/clip-powers table */ | |
1548 | clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers; | |
1549 | ||
1550 | /* Get this channel's rate-to-current-power settings table */ | |
1551 | power_info = ch_info->power_info; | |
1552 | ||
1553 | /* update OFDM Txpower settings */ | |
14577f23 | 1554 | for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE; |
b481de9c ZY |
1555 | i++, ++power_info) { |
1556 | int delta_idx; | |
1557 | ||
1558 | /* limit new power to be no more than h/w capability */ | |
1559 | power = min(ch_info->curr_txpow, clip_pwrs[i]); | |
1560 | if (power == power_info->requested_power) | |
1561 | continue; | |
1562 | ||
1563 | /* find difference between old and new requested powers, | |
1564 | * update base (non-temp-compensated) power index */ | |
1565 | delta_idx = (power - power_info->requested_power) * 2; | |
1566 | power_info->base_power_index -= delta_idx; | |
1567 | ||
1568 | /* save new requested power value */ | |
1569 | power_info->requested_power = power; | |
1570 | ||
1571 | power_changed = 1; | |
1572 | } | |
1573 | ||
1574 | /* update CCK Txpower settings, based on OFDM 12M setting ... | |
1575 | * ... all CCK power settings for a given channel are the *same*. */ | |
1576 | if (power_changed) { | |
1577 | power = | |
14577f23 | 1578 | ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]. |
b481de9c ZY |
1579 | requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF; |
1580 | ||
bb8c093b | 1581 | /* do all CCK rates' iwl3945_channel_power_info structures */ |
14577f23 | 1582 | for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) { |
b481de9c ZY |
1583 | power_info->requested_power = power; |
1584 | power_info->base_power_index = | |
14577f23 | 1585 | ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]. |
b481de9c ZY |
1586 | base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF; |
1587 | ++power_info; | |
1588 | } | |
1589 | } | |
1590 | ||
1591 | return 0; | |
1592 | } | |
1593 | ||
1594 | /** | |
bb8c093b | 1595 | * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel |
b481de9c ZY |
1596 | * |
1597 | * NOTE: Returned power limit may be less (but not more) than requested, | |
1598 | * based strictly on regulatory (eeprom and spectrum mgt) limitations | |
1599 | * (no consideration for h/w clipping limitations). | |
1600 | */ | |
bb8c093b | 1601 | static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl3945_channel_info *ch_info) |
b481de9c ZY |
1602 | { |
1603 | s8 max_power; | |
1604 | ||
1605 | #if 0 | |
1606 | /* if we're using TGd limits, use lower of TGd or EEPROM */ | |
1607 | if (ch_info->tgd_data.max_power != 0) | |
1608 | max_power = min(ch_info->tgd_data.max_power, | |
1609 | ch_info->eeprom.max_power_avg); | |
1610 | ||
1611 | /* else just use EEPROM limits */ | |
1612 | else | |
1613 | #endif | |
1614 | max_power = ch_info->eeprom.max_power_avg; | |
1615 | ||
1616 | return min(max_power, ch_info->max_power_avg); | |
1617 | } | |
1618 | ||
1619 | /** | |
bb8c093b | 1620 | * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature |
b481de9c ZY |
1621 | * |
1622 | * Compensate txpower settings of *all* channels for temperature. | |
1623 | * This only accounts for the difference between current temperature | |
1624 | * and the factory calibration temperatures, and bases the new settings | |
1625 | * on the channel's base_power_index. | |
1626 | * | |
1627 | * If RxOn is "associated", this sends the new Txpower to NIC! | |
1628 | */ | |
bb8c093b | 1629 | static int iwl3945_hw_reg_comp_txpower_temp(struct iwl3945_priv *priv) |
b481de9c | 1630 | { |
bb8c093b | 1631 | struct iwl3945_channel_info *ch_info = NULL; |
b481de9c ZY |
1632 | int delta_index; |
1633 | const s8 *clip_pwrs; /* array of h/w max power levels for each rate */ | |
1634 | u8 a_band; | |
1635 | u8 rate_index; | |
1636 | u8 scan_tbl_index; | |
1637 | u8 i; | |
1638 | int ref_temp; | |
1639 | int temperature = priv->temperature; | |
1640 | ||
1641 | /* set up new Tx power info for each and every channel, 2.4 and 5.x */ | |
1642 | for (i = 0; i < priv->channel_count; i++) { | |
1643 | ch_info = &priv->channel_info[i]; | |
1644 | a_band = is_channel_a_band(ch_info); | |
1645 | ||
1646 | /* Get this chnlgrp's factory calibration temperature */ | |
1647 | ref_temp = (s16)priv->eeprom.groups[ch_info->group_index]. | |
1648 | temperature; | |
1649 | ||
1650 | /* get power index adjustment based on curr and factory | |
1651 | * temps */ | |
bb8c093b | 1652 | delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature, |
b481de9c ZY |
1653 | ref_temp); |
1654 | ||
1655 | /* set tx power value for all rates, OFDM and CCK */ | |
1656 | for (rate_index = 0; rate_index < IWL_RATE_COUNT; | |
1657 | rate_index++) { | |
1658 | int power_idx = | |
1659 | ch_info->power_info[rate_index].base_power_index; | |
1660 | ||
1661 | /* temperature compensate */ | |
1662 | power_idx += delta_index; | |
1663 | ||
1664 | /* stay within table range */ | |
bb8c093b | 1665 | power_idx = iwl3945_hw_reg_fix_power_index(power_idx); |
b481de9c ZY |
1666 | ch_info->power_info[rate_index]. |
1667 | power_table_index = (u8) power_idx; | |
1668 | ch_info->power_info[rate_index].tpc = | |
1669 | power_gain_table[a_band][power_idx]; | |
1670 | } | |
1671 | ||
1672 | /* Get this chnlgrp's rate-to-max/clip-powers table */ | |
1673 | clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers; | |
1674 | ||
1675 | /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ | |
1676 | for (scan_tbl_index = 0; | |
1677 | scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) { | |
1678 | s32 actual_index = (scan_tbl_index == 0) ? | |
14577f23 | 1679 | IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE; |
bb8c093b | 1680 | iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index, |
b481de9c ZY |
1681 | actual_index, clip_pwrs, |
1682 | ch_info, a_band); | |
1683 | } | |
1684 | } | |
1685 | ||
1686 | /* send Txpower command for current channel to ucode */ | |
bb8c093b | 1687 | return iwl3945_hw_reg_send_txpower(priv); |
b481de9c ZY |
1688 | } |
1689 | ||
bb8c093b | 1690 | int iwl3945_hw_reg_set_txpower(struct iwl3945_priv *priv, s8 power) |
b481de9c | 1691 | { |
bb8c093b | 1692 | struct iwl3945_channel_info *ch_info; |
b481de9c ZY |
1693 | s8 max_power; |
1694 | u8 a_band; | |
1695 | u8 i; | |
1696 | ||
1697 | if (priv->user_txpower_limit == power) { | |
1698 | IWL_DEBUG_POWER("Requested Tx power same as current " | |
1699 | "limit: %ddBm.\n", power); | |
1700 | return 0; | |
1701 | } | |
1702 | ||
1703 | IWL_DEBUG_POWER("Setting upper limit clamp to %ddBm.\n", power); | |
1704 | priv->user_txpower_limit = power; | |
1705 | ||
1706 | /* set up new Tx powers for each and every channel, 2.4 and 5.x */ | |
1707 | ||
1708 | for (i = 0; i < priv->channel_count; i++) { | |
1709 | ch_info = &priv->channel_info[i]; | |
1710 | a_band = is_channel_a_band(ch_info); | |
1711 | ||
1712 | /* find minimum power of all user and regulatory constraints | |
1713 | * (does not consider h/w clipping limitations) */ | |
bb8c093b | 1714 | max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info); |
b481de9c ZY |
1715 | max_power = min(power, max_power); |
1716 | if (max_power != ch_info->curr_txpow) { | |
1717 | ch_info->curr_txpow = max_power; | |
1718 | ||
1719 | /* this considers the h/w clipping limitations */ | |
bb8c093b | 1720 | iwl3945_hw_reg_set_new_power(priv, ch_info); |
b481de9c ZY |
1721 | } |
1722 | } | |
1723 | ||
1724 | /* update txpower settings for all channels, | |
1725 | * send to NIC if associated. */ | |
1726 | is_temp_calib_needed(priv); | |
bb8c093b | 1727 | iwl3945_hw_reg_comp_txpower_temp(priv); |
b481de9c ZY |
1728 | |
1729 | return 0; | |
1730 | } | |
1731 | ||
1732 | /* will add 3945 channel switch cmd handling later */ | |
bb8c093b | 1733 | int iwl3945_hw_channel_switch(struct iwl3945_priv *priv, u16 channel) |
b481de9c ZY |
1734 | { |
1735 | return 0; | |
1736 | } | |
1737 | ||
1738 | /** | |
1739 | * iwl3945_reg_txpower_periodic - called when time to check our temperature. | |
1740 | * | |
1741 | * -- reset periodic timer | |
1742 | * -- see if temp has changed enough to warrant re-calibration ... if so: | |
1743 | * -- correct coeffs for temp (can reset temp timer) | |
1744 | * -- save this temp as "last", | |
1745 | * -- send new set of gain settings to NIC | |
1746 | * NOTE: This should continue working, even when we're not associated, | |
1747 | * so we can keep our internal table of scan powers current. */ | |
bb8c093b | 1748 | void iwl3945_reg_txpower_periodic(struct iwl3945_priv *priv) |
b481de9c ZY |
1749 | { |
1750 | /* This will kick in the "brute force" | |
bb8c093b | 1751 | * iwl3945_hw_reg_comp_txpower_temp() below */ |
b481de9c ZY |
1752 | if (!is_temp_calib_needed(priv)) |
1753 | goto reschedule; | |
1754 | ||
1755 | /* Set up a new set of temp-adjusted TxPowers, send to NIC. | |
1756 | * This is based *only* on current temperature, | |
1757 | * ignoring any previous power measurements */ | |
bb8c093b | 1758 | iwl3945_hw_reg_comp_txpower_temp(priv); |
b481de9c ZY |
1759 | |
1760 | reschedule: | |
1761 | queue_delayed_work(priv->workqueue, | |
1762 | &priv->thermal_periodic, REG_RECALIB_PERIOD * HZ); | |
1763 | } | |
1764 | ||
416e1438 | 1765 | static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work) |
b481de9c | 1766 | { |
bb8c093b | 1767 | struct iwl3945_priv *priv = container_of(work, struct iwl3945_priv, |
b481de9c ZY |
1768 | thermal_periodic.work); |
1769 | ||
1770 | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | |
1771 | return; | |
1772 | ||
1773 | mutex_lock(&priv->mutex); | |
1774 | iwl3945_reg_txpower_periodic(priv); | |
1775 | mutex_unlock(&priv->mutex); | |
1776 | } | |
1777 | ||
1778 | /** | |
bb8c093b | 1779 | * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4) |
b481de9c ZY |
1780 | * for the channel. |
1781 | * | |
1782 | * This function is used when initializing channel-info structs. | |
1783 | * | |
1784 | * NOTE: These channel groups do *NOT* match the bands above! | |
1785 | * These channel groups are based on factory-tested channels; | |
1786 | * on A-band, EEPROM's "group frequency" entries represent the top | |
1787 | * channel in each group 1-4. Group 5 All B/G channels are in group 0. | |
1788 | */ | |
bb8c093b CH |
1789 | static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl3945_priv *priv, |
1790 | const struct iwl3945_channel_info *ch_info) | |
b481de9c | 1791 | { |
bb8c093b | 1792 | struct iwl3945_eeprom_txpower_group *ch_grp = &priv->eeprom.groups[0]; |
b481de9c ZY |
1793 | u8 group; |
1794 | u16 group_index = 0; /* based on factory calib frequencies */ | |
1795 | u8 grp_channel; | |
1796 | ||
1797 | /* Find the group index for the channel ... don't use index 1(?) */ | |
1798 | if (is_channel_a_band(ch_info)) { | |
1799 | for (group = 1; group < 5; group++) { | |
1800 | grp_channel = ch_grp[group].group_channel; | |
1801 | if (ch_info->channel <= grp_channel) { | |
1802 | group_index = group; | |
1803 | break; | |
1804 | } | |
1805 | } | |
1806 | /* group 4 has a few channels *above* its factory cal freq */ | |
1807 | if (group == 5) | |
1808 | group_index = 4; | |
1809 | } else | |
1810 | group_index = 0; /* 2.4 GHz, group 0 */ | |
1811 | ||
1812 | IWL_DEBUG_POWER("Chnl %d mapped to grp %d\n", ch_info->channel, | |
1813 | group_index); | |
1814 | return group_index; | |
1815 | } | |
1816 | ||
1817 | /** | |
bb8c093b | 1818 | * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index |
b481de9c ZY |
1819 | * |
1820 | * Interpolate to get nominal (i.e. at factory calibration temperature) index | |
1821 | * into radio/DSP gain settings table for requested power. | |
1822 | */ | |
bb8c093b | 1823 | static int iwl3945_hw_reg_get_matched_power_index(struct iwl3945_priv *priv, |
b481de9c ZY |
1824 | s8 requested_power, |
1825 | s32 setting_index, s32 *new_index) | |
1826 | { | |
bb8c093b | 1827 | const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL; |
b481de9c ZY |
1828 | s32 index0, index1; |
1829 | s32 power = 2 * requested_power; | |
1830 | s32 i; | |
bb8c093b | 1831 | const struct iwl3945_eeprom_txpower_sample *samples; |
b481de9c ZY |
1832 | s32 gains0, gains1; |
1833 | s32 res; | |
1834 | s32 denominator; | |
1835 | ||
1836 | chnl_grp = &priv->eeprom.groups[setting_index]; | |
1837 | samples = chnl_grp->samples; | |
1838 | for (i = 0; i < 5; i++) { | |
1839 | if (power == samples[i].power) { | |
1840 | *new_index = samples[i].gain_index; | |
1841 | return 0; | |
1842 | } | |
1843 | } | |
1844 | ||
1845 | if (power > samples[1].power) { | |
1846 | index0 = 0; | |
1847 | index1 = 1; | |
1848 | } else if (power > samples[2].power) { | |
1849 | index0 = 1; | |
1850 | index1 = 2; | |
1851 | } else if (power > samples[3].power) { | |
1852 | index0 = 2; | |
1853 | index1 = 3; | |
1854 | } else { | |
1855 | index0 = 3; | |
1856 | index1 = 4; | |
1857 | } | |
1858 | ||
1859 | denominator = (s32) samples[index1].power - (s32) samples[index0].power; | |
1860 | if (denominator == 0) | |
1861 | return -EINVAL; | |
1862 | gains0 = (s32) samples[index0].gain_index * (1 << 19); | |
1863 | gains1 = (s32) samples[index1].gain_index * (1 << 19); | |
1864 | res = gains0 + (gains1 - gains0) * | |
1865 | ((s32) power - (s32) samples[index0].power) / denominator + | |
1866 | (1 << 18); | |
1867 | *new_index = res >> 19; | |
1868 | return 0; | |
1869 | } | |
1870 | ||
bb8c093b | 1871 | static void iwl3945_hw_reg_init_channel_groups(struct iwl3945_priv *priv) |
b481de9c ZY |
1872 | { |
1873 | u32 i; | |
1874 | s32 rate_index; | |
bb8c093b | 1875 | const struct iwl3945_eeprom_txpower_group *group; |
b481de9c ZY |
1876 | |
1877 | IWL_DEBUG_POWER("Initializing factory calib info from EEPROM\n"); | |
1878 | ||
1879 | for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) { | |
1880 | s8 *clip_pwrs; /* table of power levels for each rate */ | |
1881 | s8 satur_pwr; /* saturation power for each chnl group */ | |
1882 | group = &priv->eeprom.groups[i]; | |
1883 | ||
1884 | /* sanity check on factory saturation power value */ | |
1885 | if (group->saturation_power < 40) { | |
1886 | IWL_WARNING("Error: saturation power is %d, " | |
1887 | "less than minimum expected 40\n", | |
1888 | group->saturation_power); | |
1889 | return; | |
1890 | } | |
1891 | ||
1892 | /* | |
1893 | * Derive requested power levels for each rate, based on | |
1894 | * hardware capabilities (saturation power for band). | |
1895 | * Basic value is 3dB down from saturation, with further | |
1896 | * power reductions for highest 3 data rates. These | |
1897 | * backoffs provide headroom for high rate modulation | |
1898 | * power peaks, without too much distortion (clipping). | |
1899 | */ | |
1900 | /* we'll fill in this array with h/w max power levels */ | |
1901 | clip_pwrs = (s8 *) priv->clip_groups[i].clip_powers; | |
1902 | ||
1903 | /* divide factory saturation power by 2 to find -3dB level */ | |
1904 | satur_pwr = (s8) (group->saturation_power >> 1); | |
1905 | ||
1906 | /* fill in channel group's nominal powers for each rate */ | |
1907 | for (rate_index = 0; | |
1908 | rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) { | |
1909 | switch (rate_index) { | |
14577f23 | 1910 | case IWL_RATE_36M_INDEX_TABLE: |
b481de9c ZY |
1911 | if (i == 0) /* B/G */ |
1912 | *clip_pwrs = satur_pwr; | |
1913 | else /* A */ | |
1914 | *clip_pwrs = satur_pwr - 5; | |
1915 | break; | |
14577f23 | 1916 | case IWL_RATE_48M_INDEX_TABLE: |
b481de9c ZY |
1917 | if (i == 0) |
1918 | *clip_pwrs = satur_pwr - 7; | |
1919 | else | |
1920 | *clip_pwrs = satur_pwr - 10; | |
1921 | break; | |
14577f23 | 1922 | case IWL_RATE_54M_INDEX_TABLE: |
b481de9c ZY |
1923 | if (i == 0) |
1924 | *clip_pwrs = satur_pwr - 9; | |
1925 | else | |
1926 | *clip_pwrs = satur_pwr - 12; | |
1927 | break; | |
1928 | default: | |
1929 | *clip_pwrs = satur_pwr; | |
1930 | break; | |
1931 | } | |
1932 | } | |
1933 | } | |
1934 | } | |
1935 | ||
1936 | /** | |
1937 | * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM | |
1938 | * | |
1939 | * Second pass (during init) to set up priv->channel_info | |
1940 | * | |
1941 | * Set up Tx-power settings in our channel info database for each VALID | |
1942 | * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values | |
1943 | * and current temperature. | |
1944 | * | |
1945 | * Since this is based on current temperature (at init time), these values may | |
1946 | * not be valid for very long, but it gives us a starting/default point, | |
1947 | * and allows us to active (i.e. using Tx) scan. | |
1948 | * | |
1949 | * This does *not* write values to NIC, just sets up our internal table. | |
1950 | */ | |
bb8c093b | 1951 | int iwl3945_txpower_set_from_eeprom(struct iwl3945_priv *priv) |
b481de9c | 1952 | { |
bb8c093b CH |
1953 | struct iwl3945_channel_info *ch_info = NULL; |
1954 | struct iwl3945_channel_power_info *pwr_info; | |
b481de9c ZY |
1955 | int delta_index; |
1956 | u8 rate_index; | |
1957 | u8 scan_tbl_index; | |
1958 | const s8 *clip_pwrs; /* array of power levels for each rate */ | |
1959 | u8 gain, dsp_atten; | |
1960 | s8 power; | |
1961 | u8 pwr_index, base_pwr_index, a_band; | |
1962 | u8 i; | |
1963 | int temperature; | |
1964 | ||
1965 | /* save temperature reference, | |
1966 | * so we can determine next time to calibrate */ | |
bb8c093b | 1967 | temperature = iwl3945_hw_reg_txpower_get_temperature(priv); |
b481de9c ZY |
1968 | priv->last_temperature = temperature; |
1969 | ||
bb8c093b | 1970 | iwl3945_hw_reg_init_channel_groups(priv); |
b481de9c ZY |
1971 | |
1972 | /* initialize Tx power info for each and every channel, 2.4 and 5.x */ | |
1973 | for (i = 0, ch_info = priv->channel_info; i < priv->channel_count; | |
1974 | i++, ch_info++) { | |
1975 | a_band = is_channel_a_band(ch_info); | |
1976 | if (!is_channel_valid(ch_info)) | |
1977 | continue; | |
1978 | ||
1979 | /* find this channel's channel group (*not* "band") index */ | |
1980 | ch_info->group_index = | |
bb8c093b | 1981 | iwl3945_hw_reg_get_ch_grp_index(priv, ch_info); |
b481de9c ZY |
1982 | |
1983 | /* Get this chnlgrp's rate->max/clip-powers table */ | |
1984 | clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers; | |
1985 | ||
1986 | /* calculate power index *adjustment* value according to | |
1987 | * diff between current temperature and factory temperature */ | |
bb8c093b | 1988 | delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature, |
b481de9c ZY |
1989 | priv->eeprom.groups[ch_info->group_index]. |
1990 | temperature); | |
1991 | ||
1992 | IWL_DEBUG_POWER("Delta index for channel %d: %d [%d]\n", | |
1993 | ch_info->channel, delta_index, temperature + | |
1994 | IWL_TEMP_CONVERT); | |
1995 | ||
1996 | /* set tx power value for all OFDM rates */ | |
1997 | for (rate_index = 0; rate_index < IWL_OFDM_RATES; | |
1998 | rate_index++) { | |
1999 | s32 power_idx; | |
2000 | int rc; | |
2001 | ||
2002 | /* use channel group's clip-power table, | |
2003 | * but don't exceed channel's max power */ | |
2004 | s8 pwr = min(ch_info->max_power_avg, | |
2005 | clip_pwrs[rate_index]); | |
2006 | ||
2007 | pwr_info = &ch_info->power_info[rate_index]; | |
2008 | ||
2009 | /* get base (i.e. at factory-measured temperature) | |
2010 | * power table index for this rate's power */ | |
bb8c093b | 2011 | rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr, |
b481de9c ZY |
2012 | ch_info->group_index, |
2013 | &power_idx); | |
2014 | if (rc) { | |
2015 | IWL_ERROR("Invalid power index\n"); | |
2016 | return rc; | |
2017 | } | |
2018 | pwr_info->base_power_index = (u8) power_idx; | |
2019 | ||
2020 | /* temperature compensate */ | |
2021 | power_idx += delta_index; | |
2022 | ||
2023 | /* stay within range of gain table */ | |
bb8c093b | 2024 | power_idx = iwl3945_hw_reg_fix_power_index(power_idx); |
b481de9c | 2025 | |
bb8c093b | 2026 | /* fill 1 OFDM rate's iwl3945_channel_power_info struct */ |
b481de9c ZY |
2027 | pwr_info->requested_power = pwr; |
2028 | pwr_info->power_table_index = (u8) power_idx; | |
2029 | pwr_info->tpc.tx_gain = | |
2030 | power_gain_table[a_band][power_idx].tx_gain; | |
2031 | pwr_info->tpc.dsp_atten = | |
2032 | power_gain_table[a_band][power_idx].dsp_atten; | |
2033 | } | |
2034 | ||
2035 | /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/ | |
14577f23 | 2036 | pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]; |
b481de9c ZY |
2037 | power = pwr_info->requested_power + |
2038 | IWL_CCK_FROM_OFDM_POWER_DIFF; | |
2039 | pwr_index = pwr_info->power_table_index + | |
2040 | IWL_CCK_FROM_OFDM_INDEX_DIFF; | |
2041 | base_pwr_index = pwr_info->base_power_index + | |
2042 | IWL_CCK_FROM_OFDM_INDEX_DIFF; | |
2043 | ||
2044 | /* stay within table range */ | |
bb8c093b | 2045 | pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index); |
b481de9c ZY |
2046 | gain = power_gain_table[a_band][pwr_index].tx_gain; |
2047 | dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten; | |
2048 | ||
bb8c093b | 2049 | /* fill each CCK rate's iwl3945_channel_power_info structure |
b481de9c ZY |
2050 | * NOTE: All CCK-rate Txpwrs are the same for a given chnl! |
2051 | * NOTE: CCK rates start at end of OFDM rates! */ | |
14577f23 MA |
2052 | for (rate_index = 0; |
2053 | rate_index < IWL_CCK_RATES; rate_index++) { | |
2054 | pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES]; | |
b481de9c ZY |
2055 | pwr_info->requested_power = power; |
2056 | pwr_info->power_table_index = pwr_index; | |
2057 | pwr_info->base_power_index = base_pwr_index; | |
2058 | pwr_info->tpc.tx_gain = gain; | |
2059 | pwr_info->tpc.dsp_atten = dsp_atten; | |
2060 | } | |
2061 | ||
2062 | /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ | |
2063 | for (scan_tbl_index = 0; | |
2064 | scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) { | |
2065 | s32 actual_index = (scan_tbl_index == 0) ? | |
14577f23 | 2066 | IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE; |
bb8c093b | 2067 | iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index, |
b481de9c ZY |
2068 | actual_index, clip_pwrs, ch_info, a_band); |
2069 | } | |
2070 | } | |
2071 | ||
2072 | return 0; | |
2073 | } | |
2074 | ||
bb8c093b | 2075 | int iwl3945_hw_rxq_stop(struct iwl3945_priv *priv) |
b481de9c ZY |
2076 | { |
2077 | int rc; | |
2078 | unsigned long flags; | |
2079 | ||
2080 | spin_lock_irqsave(&priv->lock, flags); | |
bb8c093b | 2081 | rc = iwl3945_grab_nic_access(priv); |
b481de9c ZY |
2082 | if (rc) { |
2083 | spin_unlock_irqrestore(&priv->lock, flags); | |
2084 | return rc; | |
2085 | } | |
2086 | ||
bb8c093b CH |
2087 | iwl3945_write_direct32(priv, FH_RCSR_CONFIG(0), 0); |
2088 | rc = iwl3945_poll_direct_bit(priv, FH_RSSR_STATUS, (1 << 24), 1000); | |
b481de9c ZY |
2089 | if (rc < 0) |
2090 | IWL_ERROR("Can't stop Rx DMA.\n"); | |
2091 | ||
bb8c093b | 2092 | iwl3945_release_nic_access(priv); |
b481de9c ZY |
2093 | spin_unlock_irqrestore(&priv->lock, flags); |
2094 | ||
2095 | return 0; | |
2096 | } | |
2097 | ||
bb8c093b | 2098 | int iwl3945_hw_tx_queue_init(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq) |
b481de9c ZY |
2099 | { |
2100 | int rc; | |
2101 | unsigned long flags; | |
2102 | int txq_id = txq->q.id; | |
2103 | ||
bb8c093b | 2104 | struct iwl3945_shared *shared_data = priv->hw_setting.shared_virt; |
b481de9c ZY |
2105 | |
2106 | shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr); | |
2107 | ||
2108 | spin_lock_irqsave(&priv->lock, flags); | |
bb8c093b | 2109 | rc = iwl3945_grab_nic_access(priv); |
b481de9c ZY |
2110 | if (rc) { |
2111 | spin_unlock_irqrestore(&priv->lock, flags); | |
2112 | return rc; | |
2113 | } | |
bb8c093b CH |
2114 | iwl3945_write_direct32(priv, FH_CBCC_CTRL(txq_id), 0); |
2115 | iwl3945_write_direct32(priv, FH_CBCC_BASE(txq_id), 0); | |
b481de9c | 2116 | |
bb8c093b | 2117 | iwl3945_write_direct32(priv, FH_TCSR_CONFIG(txq_id), |
b481de9c ZY |
2118 | ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT | |
2119 | ALM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF | | |
2120 | ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD | | |
2121 | ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL | | |
2122 | ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE); | |
bb8c093b | 2123 | iwl3945_release_nic_access(priv); |
b481de9c ZY |
2124 | |
2125 | /* fake read to flush all prev. writes */ | |
bb8c093b | 2126 | iwl3945_read32(priv, FH_TSSR_CBB_BASE); |
b481de9c ZY |
2127 | spin_unlock_irqrestore(&priv->lock, flags); |
2128 | ||
2129 | return 0; | |
2130 | } | |
2131 | ||
bb8c093b | 2132 | int iwl3945_hw_get_rx_read(struct iwl3945_priv *priv) |
b481de9c | 2133 | { |
bb8c093b | 2134 | struct iwl3945_shared *shared_data = priv->hw_setting.shared_virt; |
b481de9c ZY |
2135 | |
2136 | return le32_to_cpu(shared_data->rx_read_ptr[0]); | |
2137 | } | |
2138 | ||
2139 | /** | |
2140 | * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table | |
2141 | */ | |
bb8c093b | 2142 | int iwl3945_init_hw_rate_table(struct iwl3945_priv *priv) |
b481de9c | 2143 | { |
14577f23 | 2144 | int rc, i, index, prev_index; |
bb8c093b | 2145 | struct iwl3945_rate_scaling_cmd rate_cmd = { |
b481de9c ZY |
2146 | .reserved = {0, 0, 0}, |
2147 | }; | |
bb8c093b | 2148 | struct iwl3945_rate_scaling_info *table = rate_cmd.table; |
b481de9c | 2149 | |
bb8c093b CH |
2150 | for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) { |
2151 | index = iwl3945_rates[i].table_rs_index; | |
14577f23 MA |
2152 | |
2153 | table[index].rate_n_flags = | |
bb8c093b | 2154 | iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0); |
14577f23 | 2155 | table[index].try_cnt = priv->retry_rate; |
bb8c093b CH |
2156 | prev_index = iwl3945_get_prev_ieee_rate(i); |
2157 | table[index].next_rate_index = iwl3945_rates[prev_index].table_rs_index; | |
b481de9c ZY |
2158 | } |
2159 | ||
2160 | switch (priv->phymode) { | |
2161 | case MODE_IEEE80211A: | |
2162 | IWL_DEBUG_RATE("Select A mode rate scale\n"); | |
2163 | /* If one of the following CCK rates is used, | |
2164 | * have it fall back to the 6M OFDM rate */ | |
14577f23 | 2165 | for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) |
bb8c093b | 2166 | table[i].next_rate_index = iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index; |
b481de9c ZY |
2167 | |
2168 | /* Don't fall back to CCK rates */ | |
14577f23 | 2169 | table[IWL_RATE_12M_INDEX_TABLE].next_rate_index = IWL_RATE_9M_INDEX_TABLE; |
b481de9c ZY |
2170 | |
2171 | /* Don't drop out of OFDM rates */ | |
14577f23 | 2172 | table[IWL_RATE_6M_INDEX_TABLE].next_rate_index = |
bb8c093b | 2173 | iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index; |
b481de9c ZY |
2174 | break; |
2175 | ||
2176 | case MODE_IEEE80211B: | |
2177 | IWL_DEBUG_RATE("Select B mode rate scale\n"); | |
2178 | /* If an OFDM rate is used, have it fall back to the | |
2179 | * 1M CCK rates */ | |
14577f23 | 2180 | for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE; i++) |
bb8c093b | 2181 | table[i].next_rate_index = iwl3945_rates[IWL_FIRST_CCK_RATE].table_rs_index; |
b481de9c ZY |
2182 | |
2183 | /* CCK shouldn't fall back to OFDM... */ | |
14577f23 | 2184 | table[IWL_RATE_11M_INDEX_TABLE].next_rate_index = IWL_RATE_5M_INDEX_TABLE; |
b481de9c ZY |
2185 | break; |
2186 | ||
2187 | default: | |
2188 | IWL_DEBUG_RATE("Select G mode rate scale\n"); | |
2189 | break; | |
2190 | } | |
2191 | ||
2192 | /* Update the rate scaling for control frame Tx */ | |
2193 | rate_cmd.table_id = 0; | |
bb8c093b | 2194 | rc = iwl3945_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd), |
b481de9c ZY |
2195 | &rate_cmd); |
2196 | if (rc) | |
2197 | return rc; | |
2198 | ||
2199 | /* Update the rate scaling for data frame Tx */ | |
2200 | rate_cmd.table_id = 1; | |
bb8c093b | 2201 | return iwl3945_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd), |
b481de9c ZY |
2202 | &rate_cmd); |
2203 | } | |
2204 | ||
bb8c093b | 2205 | int iwl3945_hw_set_hw_setting(struct iwl3945_priv *priv) |
b481de9c ZY |
2206 | { |
2207 | memset((void *)&priv->hw_setting, 0, | |
bb8c093b | 2208 | sizeof(struct iwl3945_driver_hw_info)); |
b481de9c ZY |
2209 | |
2210 | priv->hw_setting.shared_virt = | |
2211 | pci_alloc_consistent(priv->pci_dev, | |
bb8c093b | 2212 | sizeof(struct iwl3945_shared), |
b481de9c ZY |
2213 | &priv->hw_setting.shared_phys); |
2214 | ||
2215 | if (!priv->hw_setting.shared_virt) { | |
2216 | IWL_ERROR("failed to allocate pci memory\n"); | |
2217 | mutex_unlock(&priv->mutex); | |
2218 | return -ENOMEM; | |
2219 | } | |
2220 | ||
2221 | priv->hw_setting.ac_queue_count = AC_NUM; | |
2222 | priv->hw_setting.rx_buffer_size = IWL_RX_BUF_SIZE; | |
bb8c093b | 2223 | priv->hw_setting.tx_cmd_len = sizeof(struct iwl3945_tx_cmd); |
b481de9c ZY |
2224 | priv->hw_setting.max_rxq_size = RX_QUEUE_SIZE; |
2225 | priv->hw_setting.max_rxq_log = RX_QUEUE_SIZE_LOG; | |
b481de9c ZY |
2226 | priv->hw_setting.max_stations = IWL3945_STATION_COUNT; |
2227 | priv->hw_setting.bcast_sta_id = IWL3945_BROADCAST_ID; | |
2228 | return 0; | |
2229 | } | |
2230 | ||
bb8c093b CH |
2231 | unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv, |
2232 | struct iwl3945_frame *frame, u8 rate) | |
b481de9c | 2233 | { |
bb8c093b | 2234 | struct iwl3945_tx_beacon_cmd *tx_beacon_cmd; |
b481de9c ZY |
2235 | unsigned int frame_size; |
2236 | ||
bb8c093b | 2237 | tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u; |
b481de9c ZY |
2238 | memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); |
2239 | ||
2240 | tx_beacon_cmd->tx.sta_id = IWL3945_BROADCAST_ID; | |
2241 | tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; | |
2242 | ||
bb8c093b | 2243 | frame_size = iwl3945_fill_beacon_frame(priv, |
b481de9c | 2244 | tx_beacon_cmd->frame, |
bb8c093b | 2245 | iwl3945_broadcast_addr, |
b481de9c ZY |
2246 | sizeof(frame->u) - sizeof(*tx_beacon_cmd)); |
2247 | ||
2248 | BUG_ON(frame_size > MAX_MPDU_SIZE); | |
2249 | tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); | |
2250 | ||
2251 | tx_beacon_cmd->tx.rate = rate; | |
2252 | tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK | | |
2253 | TX_CMD_FLG_TSF_MSK); | |
2254 | ||
14577f23 MA |
2255 | /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/ |
2256 | tx_beacon_cmd->tx.supp_rates[0] = | |
2257 | (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; | |
2258 | ||
b481de9c | 2259 | tx_beacon_cmd->tx.supp_rates[1] = |
14577f23 | 2260 | (IWL_CCK_BASIC_RATES_MASK & 0xF); |
b481de9c | 2261 | |
bb8c093b | 2262 | return (sizeof(struct iwl3945_tx_beacon_cmd) + frame_size); |
b481de9c ZY |
2263 | } |
2264 | ||
bb8c093b | 2265 | void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv) |
b481de9c ZY |
2266 | { |
2267 | priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx; | |
2268 | } | |
2269 | ||
bb8c093b | 2270 | void iwl3945_hw_setup_deferred_work(struct iwl3945_priv *priv) |
b481de9c ZY |
2271 | { |
2272 | INIT_DELAYED_WORK(&priv->thermal_periodic, | |
2273 | iwl3945_bg_reg_txpower_periodic); | |
2274 | } | |
2275 | ||
bb8c093b | 2276 | void iwl3945_hw_cancel_deferred_work(struct iwl3945_priv *priv) |
b481de9c ZY |
2277 | { |
2278 | cancel_delayed_work(&priv->thermal_periodic); | |
2279 | } | |
2280 | ||
bb8c093b | 2281 | struct pci_device_id iwl3945_hw_card_ids[] = { |
3567c11d ZY |
2282 | {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4222)}, |
2283 | {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4227)}, | |
b481de9c ZY |
2284 | {0} |
2285 | }; | |
2286 | ||
bb8c093b | 2287 | inline int iwl3945_eeprom_acquire_semaphore(struct iwl3945_priv *priv) |
b481de9c | 2288 | { |
bb8c093b | 2289 | _iwl3945_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK); |
b481de9c ZY |
2290 | return 0; |
2291 | } | |
2292 | ||
bb8c093b | 2293 | MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids); |