]>
Commit | Line | Data |
---|---|---|
ff9fc791 HS |
1 | /* |
2 | * Implement cfg80211 ("iw") support. | |
3 | * | |
4 | * Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany | |
5 | * Holger Schurig <hs4233@mail.mn-solutions.de> | |
6 | * | |
7 | */ | |
8 | ||
241a6a54 AM |
9 | #include <linux/sched.h> |
10 | #include <linux/wait.h> | |
5a0e3ad6 | 11 | #include <linux/slab.h> |
a9fda88b | 12 | #include <linux/sched.h> |
b68b3c4d | 13 | #include <linux/wait.h> |
1047d5ed | 14 | #include <linux/ieee80211.h> |
ff9fc791 | 15 | #include <net/cfg80211.h> |
e86dc1ca | 16 | #include <asm/unaligned.h> |
ff9fc791 | 17 | |
e86dc1ca | 18 | #include "decl.h" |
ff9fc791 HS |
19 | #include "cfg.h" |
20 | #include "cmd.h" | |
21 | ||
22 | ||
23 | #define CHAN2G(_channel, _freq, _flags) { \ | |
24 | .band = IEEE80211_BAND_2GHZ, \ | |
25 | .center_freq = (_freq), \ | |
26 | .hw_value = (_channel), \ | |
27 | .flags = (_flags), \ | |
28 | .max_antenna_gain = 0, \ | |
29 | .max_power = 30, \ | |
30 | } | |
31 | ||
32 | static struct ieee80211_channel lbs_2ghz_channels[] = { | |
33 | CHAN2G(1, 2412, 0), | |
34 | CHAN2G(2, 2417, 0), | |
35 | CHAN2G(3, 2422, 0), | |
36 | CHAN2G(4, 2427, 0), | |
37 | CHAN2G(5, 2432, 0), | |
38 | CHAN2G(6, 2437, 0), | |
39 | CHAN2G(7, 2442, 0), | |
40 | CHAN2G(8, 2447, 0), | |
41 | CHAN2G(9, 2452, 0), | |
42 | CHAN2G(10, 2457, 0), | |
43 | CHAN2G(11, 2462, 0), | |
44 | CHAN2G(12, 2467, 0), | |
45 | CHAN2G(13, 2472, 0), | |
46 | CHAN2G(14, 2484, 0), | |
47 | }; | |
48 | ||
e86dc1ca KD |
49 | #define RATETAB_ENT(_rate, _hw_value, _flags) { \ |
50 | .bitrate = (_rate), \ | |
51 | .hw_value = (_hw_value), \ | |
52 | .flags = (_flags), \ | |
ff9fc791 HS |
53 | } |
54 | ||
55 | ||
e86dc1ca | 56 | /* Table 6 in section 3.2.1.1 */ |
ff9fc791 | 57 | static struct ieee80211_rate lbs_rates[] = { |
e86dc1ca KD |
58 | RATETAB_ENT(10, 0, 0), |
59 | RATETAB_ENT(20, 1, 0), | |
60 | RATETAB_ENT(55, 2, 0), | |
61 | RATETAB_ENT(110, 3, 0), | |
62 | RATETAB_ENT(60, 9, 0), | |
63 | RATETAB_ENT(90, 6, 0), | |
64 | RATETAB_ENT(120, 7, 0), | |
65 | RATETAB_ENT(180, 8, 0), | |
66 | RATETAB_ENT(240, 9, 0), | |
67 | RATETAB_ENT(360, 10, 0), | |
68 | RATETAB_ENT(480, 11, 0), | |
69 | RATETAB_ENT(540, 12, 0), | |
ff9fc791 HS |
70 | }; |
71 | ||
72 | static struct ieee80211_supported_band lbs_band_2ghz = { | |
73 | .channels = lbs_2ghz_channels, | |
74 | .n_channels = ARRAY_SIZE(lbs_2ghz_channels), | |
75 | .bitrates = lbs_rates, | |
76 | .n_bitrates = ARRAY_SIZE(lbs_rates), | |
77 | }; | |
78 | ||
79 | ||
80 | static const u32 cipher_suites[] = { | |
81 | WLAN_CIPHER_SUITE_WEP40, | |
82 | WLAN_CIPHER_SUITE_WEP104, | |
83 | WLAN_CIPHER_SUITE_TKIP, | |
84 | WLAN_CIPHER_SUITE_CCMP, | |
85 | }; | |
86 | ||
e86dc1ca KD |
87 | /* Time to stay on the channel */ |
88 | #define LBS_DWELL_PASSIVE 100 | |
89 | #define LBS_DWELL_ACTIVE 40 | |
ff9fc791 HS |
90 | |
91 | ||
e86dc1ca KD |
92 | /*************************************************************************** |
93 | * Misc utility functions | |
94 | * | |
95 | * TLVs are Marvell specific. They are very similar to IEs, they have the | |
96 | * same structure: type, length, data*. The only difference: for IEs, the | |
97 | * type and length are u8, but for TLVs they're __le16. | |
98 | */ | |
99 | ||
100 | /* | |
101 | * Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1 | |
102 | * in the firmware spec | |
103 | */ | |
104 | static u8 lbs_auth_to_authtype(enum nl80211_auth_type auth_type) | |
105 | { | |
106 | int ret = -ENOTSUPP; | |
107 | ||
108 | switch (auth_type) { | |
109 | case NL80211_AUTHTYPE_OPEN_SYSTEM: | |
110 | case NL80211_AUTHTYPE_SHARED_KEY: | |
111 | ret = auth_type; | |
112 | break; | |
113 | case NL80211_AUTHTYPE_AUTOMATIC: | |
114 | ret = NL80211_AUTHTYPE_OPEN_SYSTEM; | |
115 | break; | |
116 | case NL80211_AUTHTYPE_NETWORK_EAP: | |
117 | ret = 0x80; | |
118 | break; | |
119 | default: | |
120 | /* silence compiler */ | |
121 | break; | |
122 | } | |
123 | return ret; | |
124 | } | |
125 | ||
126 | ||
127 | /* Various firmware commands need the list of supported rates, but with | |
128 | the hight-bit set for basic rates */ | |
129 | static int lbs_add_rates(u8 *rates) | |
130 | { | |
131 | size_t i; | |
132 | ||
133 | for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { | |
134 | u8 rate = lbs_rates[i].bitrate / 5; | |
135 | if (rate == 0x02 || rate == 0x04 || | |
136 | rate == 0x0b || rate == 0x16) | |
137 | rate |= 0x80; | |
138 | rates[i] = rate; | |
139 | } | |
140 | return ARRAY_SIZE(lbs_rates); | |
141 | } | |
142 | ||
143 | ||
144 | /*************************************************************************** | |
145 | * TLV utility functions | |
146 | * | |
147 | * TLVs are Marvell specific. They are very similar to IEs, they have the | |
148 | * same structure: type, length, data*. The only difference: for IEs, the | |
149 | * type and length are u8, but for TLVs they're __le16. | |
150 | */ | |
151 | ||
152 | ||
153 | /* | |
154 | * Add ssid TLV | |
155 | */ | |
156 | #define LBS_MAX_SSID_TLV_SIZE \ | |
157 | (sizeof(struct mrvl_ie_header) \ | |
158 | + IEEE80211_MAX_SSID_LEN) | |
159 | ||
160 | static int lbs_add_ssid_tlv(u8 *tlv, const u8 *ssid, int ssid_len) | |
161 | { | |
162 | struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv; | |
163 | ||
164 | /* | |
165 | * TLV-ID SSID 00 00 | |
166 | * length 06 00 | |
167 | * ssid 4d 4e 54 45 53 54 | |
168 | */ | |
169 | ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID); | |
170 | ssid_tlv->header.len = cpu_to_le16(ssid_len); | |
171 | memcpy(ssid_tlv->ssid, ssid, ssid_len); | |
172 | return sizeof(ssid_tlv->header) + ssid_len; | |
173 | } | |
174 | ||
175 | ||
176 | /* | |
177 | * Add channel list TLV (section 8.4.2) | |
178 | * | |
179 | * Actual channel data comes from priv->wdev->wiphy->channels. | |
180 | */ | |
181 | #define LBS_MAX_CHANNEL_LIST_TLV_SIZE \ | |
182 | (sizeof(struct mrvl_ie_header) \ | |
183 | + (LBS_SCAN_BEFORE_NAP * sizeof(struct chanscanparamset))) | |
184 | ||
185 | static int lbs_add_channel_list_tlv(struct lbs_private *priv, u8 *tlv, | |
186 | int last_channel, int active_scan) | |
187 | { | |
188 | int chanscanparamsize = sizeof(struct chanscanparamset) * | |
189 | (last_channel - priv->scan_channel); | |
190 | ||
191 | struct mrvl_ie_header *header = (void *) tlv; | |
192 | ||
193 | /* | |
194 | * TLV-ID CHANLIST 01 01 | |
195 | * length 0e 00 | |
196 | * channel 00 01 00 00 00 64 00 | |
197 | * radio type 00 | |
198 | * channel 01 | |
199 | * scan type 00 | |
200 | * min scan time 00 00 | |
201 | * max scan time 64 00 | |
202 | * channel 2 00 02 00 00 00 64 00 | |
203 | * | |
204 | */ | |
205 | ||
206 | header->type = cpu_to_le16(TLV_TYPE_CHANLIST); | |
207 | header->len = cpu_to_le16(chanscanparamsize); | |
208 | tlv += sizeof(struct mrvl_ie_header); | |
209 | ||
210 | /* lbs_deb_scan("scan: channels %d to %d\n", priv->scan_channel, | |
211 | last_channel); */ | |
212 | memset(tlv, 0, chanscanparamsize); | |
213 | ||
214 | while (priv->scan_channel < last_channel) { | |
215 | struct chanscanparamset *param = (void *) tlv; | |
216 | ||
217 | param->radiotype = CMD_SCAN_RADIO_TYPE_BG; | |
218 | param->channumber = | |
219 | priv->scan_req->channels[priv->scan_channel]->hw_value; | |
220 | if (active_scan) { | |
221 | param->maxscantime = cpu_to_le16(LBS_DWELL_ACTIVE); | |
222 | } else { | |
223 | param->chanscanmode.passivescan = 1; | |
224 | param->maxscantime = cpu_to_le16(LBS_DWELL_PASSIVE); | |
225 | } | |
226 | tlv += sizeof(struct chanscanparamset); | |
227 | priv->scan_channel++; | |
228 | } | |
229 | return sizeof(struct mrvl_ie_header) + chanscanparamsize; | |
230 | } | |
231 | ||
232 | ||
233 | /* | |
234 | * Add rates TLV | |
235 | * | |
236 | * The rates are in lbs_bg_rates[], but for the 802.11b | |
237 | * rates the high bit is set. We add this TLV only because | |
238 | * there's a firmware which otherwise doesn't report all | |
239 | * APs in range. | |
240 | */ | |
241 | #define LBS_MAX_RATES_TLV_SIZE \ | |
242 | (sizeof(struct mrvl_ie_header) \ | |
243 | + (ARRAY_SIZE(lbs_rates))) | |
244 | ||
245 | /* Adds a TLV with all rates the hardware supports */ | |
246 | static int lbs_add_supported_rates_tlv(u8 *tlv) | |
247 | { | |
248 | size_t i; | |
249 | struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; | |
250 | ||
251 | /* | |
252 | * TLV-ID RATES 01 00 | |
253 | * length 0e 00 | |
254 | * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c | |
255 | */ | |
256 | rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); | |
257 | tlv += sizeof(rate_tlv->header); | |
258 | i = lbs_add_rates(tlv); | |
259 | tlv += i; | |
260 | rate_tlv->header.len = cpu_to_le16(i); | |
261 | return sizeof(rate_tlv->header) + i; | |
262 | } | |
263 | ||
19757539 DW |
264 | /* Add common rates from a TLV and return the new end of the TLV */ |
265 | static u8 * | |
266 | add_ie_rates(u8 *tlv, const u8 *ie, int *nrates) | |
267 | { | |
268 | int hw, ap, ap_max = ie[1]; | |
269 | u8 hw_rate; | |
270 | ||
271 | /* Advance past IE header */ | |
272 | ie += 2; | |
273 | ||
274 | lbs_deb_hex(LBS_DEB_ASSOC, "AP IE Rates", (u8 *) ie, ap_max); | |
275 | ||
276 | for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { | |
277 | hw_rate = lbs_rates[hw].bitrate / 5; | |
278 | for (ap = 0; ap < ap_max; ap++) { | |
279 | if (hw_rate == (ie[ap] & 0x7f)) { | |
280 | *tlv++ = ie[ap]; | |
281 | *nrates = *nrates + 1; | |
282 | } | |
283 | } | |
284 | } | |
285 | return tlv; | |
286 | } | |
e86dc1ca KD |
287 | |
288 | /* | |
289 | * Adds a TLV with all rates the hardware *and* BSS supports. | |
290 | */ | |
291 | static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss) | |
292 | { | |
293 | struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; | |
19757539 DW |
294 | const u8 *rates_eid, *ext_rates_eid; |
295 | int n = 0; | |
296 | ||
297 | rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); | |
298 | ext_rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_EXT_SUPP_RATES); | |
e86dc1ca KD |
299 | |
300 | /* | |
301 | * 01 00 TLV_TYPE_RATES | |
302 | * 04 00 len | |
303 | * 82 84 8b 96 rates | |
304 | */ | |
305 | rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); | |
306 | tlv += sizeof(rate_tlv->header); | |
307 | ||
19757539 DW |
308 | /* Add basic rates */ |
309 | if (rates_eid) { | |
310 | tlv = add_ie_rates(tlv, rates_eid, &n); | |
311 | ||
312 | /* Add extended rates, if any */ | |
313 | if (ext_rates_eid) | |
314 | tlv = add_ie_rates(tlv, ext_rates_eid, &n); | |
315 | } else { | |
316 | lbs_deb_assoc("assoc: bss had no basic rate IE\n"); | |
e86dc1ca KD |
317 | /* Fallback: add basic 802.11b rates */ |
318 | *tlv++ = 0x82; | |
319 | *tlv++ = 0x84; | |
320 | *tlv++ = 0x8b; | |
321 | *tlv++ = 0x96; | |
322 | n = 4; | |
e86dc1ca KD |
323 | } |
324 | ||
325 | rate_tlv->header.len = cpu_to_le16(n); | |
326 | return sizeof(rate_tlv->header) + n; | |
327 | } | |
328 | ||
329 | ||
330 | /* | |
331 | * Add auth type TLV. | |
332 | * | |
333 | * This is only needed for newer firmware (V9 and up). | |
334 | */ | |
335 | #define LBS_MAX_AUTH_TYPE_TLV_SIZE \ | |
336 | sizeof(struct mrvl_ie_auth_type) | |
337 | ||
338 | static int lbs_add_auth_type_tlv(u8 *tlv, enum nl80211_auth_type auth_type) | |
339 | { | |
340 | struct mrvl_ie_auth_type *auth = (void *) tlv; | |
341 | ||
342 | /* | |
343 | * 1f 01 TLV_TYPE_AUTH_TYPE | |
344 | * 01 00 len | |
345 | * 01 auth type | |
346 | */ | |
347 | auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); | |
348 | auth->header.len = cpu_to_le16(sizeof(*auth)-sizeof(auth->header)); | |
349 | auth->auth = cpu_to_le16(lbs_auth_to_authtype(auth_type)); | |
350 | return sizeof(*auth); | |
351 | } | |
352 | ||
353 | ||
354 | /* | |
355 | * Add channel (phy ds) TLV | |
356 | */ | |
357 | #define LBS_MAX_CHANNEL_TLV_SIZE \ | |
358 | sizeof(struct mrvl_ie_header) | |
359 | ||
360 | static int lbs_add_channel_tlv(u8 *tlv, u8 channel) | |
361 | { | |
362 | struct mrvl_ie_ds_param_set *ds = (void *) tlv; | |
363 | ||
364 | /* | |
365 | * 03 00 TLV_TYPE_PHY_DS | |
366 | * 01 00 len | |
367 | * 06 channel | |
368 | */ | |
369 | ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); | |
370 | ds->header.len = cpu_to_le16(sizeof(*ds)-sizeof(ds->header)); | |
371 | ds->channel = channel; | |
372 | return sizeof(*ds); | |
373 | } | |
374 | ||
375 | ||
376 | /* | |
377 | * Add (empty) CF param TLV of the form: | |
378 | */ | |
379 | #define LBS_MAX_CF_PARAM_TLV_SIZE \ | |
380 | sizeof(struct mrvl_ie_header) | |
381 | ||
382 | static int lbs_add_cf_param_tlv(u8 *tlv) | |
383 | { | |
384 | struct mrvl_ie_cf_param_set *cf = (void *)tlv; | |
385 | ||
386 | /* | |
387 | * 04 00 TLV_TYPE_CF | |
388 | * 06 00 len | |
389 | * 00 cfpcnt | |
390 | * 00 cfpperiod | |
391 | * 00 00 cfpmaxduration | |
392 | * 00 00 cfpdurationremaining | |
393 | */ | |
394 | cf->header.type = cpu_to_le16(TLV_TYPE_CF); | |
395 | cf->header.len = cpu_to_le16(sizeof(*cf)-sizeof(cf->header)); | |
396 | return sizeof(*cf); | |
397 | } | |
398 | ||
399 | /* | |
400 | * Add WPA TLV | |
401 | */ | |
402 | #define LBS_MAX_WPA_TLV_SIZE \ | |
403 | (sizeof(struct mrvl_ie_header) \ | |
404 | + 128 /* TODO: I guessed the size */) | |
405 | ||
406 | static int lbs_add_wpa_tlv(u8 *tlv, const u8 *ie, u8 ie_len) | |
407 | { | |
408 | size_t tlv_len; | |
409 | ||
410 | /* | |
411 | * We need just convert an IE to an TLV. IEs use u8 for the header, | |
412 | * u8 type | |
413 | * u8 len | |
414 | * u8[] data | |
415 | * but TLVs use __le16 instead: | |
416 | * __le16 type | |
417 | * __le16 len | |
418 | * u8[] data | |
419 | */ | |
420 | *tlv++ = *ie++; | |
421 | *tlv++ = 0; | |
422 | tlv_len = *tlv++ = *ie++; | |
423 | *tlv++ = 0; | |
424 | while (tlv_len--) | |
425 | *tlv++ = *ie++; | |
426 | /* the TLV is two bytes larger than the IE */ | |
427 | return ie_len + 2; | |
428 | } | |
429 | ||
430 | /*************************************************************************** | |
431 | * Set Channel | |
432 | */ | |
433 | ||
ff9fc791 | 434 | static int lbs_cfg_set_channel(struct wiphy *wiphy, |
f444de05 | 435 | struct net_device *netdev, |
e86dc1ca | 436 | struct ieee80211_channel *channel, |
ff9fc791 HS |
437 | enum nl80211_channel_type channel_type) |
438 | { | |
439 | struct lbs_private *priv = wiphy_priv(wiphy); | |
e86dc1ca KD |
440 | int ret = -ENOTSUPP; |
441 | ||
442 | lbs_deb_enter_args(LBS_DEB_CFG80211, "freq %d, type %d", | |
443 | channel->center_freq, channel_type); | |
444 | ||
445 | if (channel_type != NL80211_CHAN_NO_HT) | |
446 | goto out; | |
447 | ||
448 | ret = lbs_set_channel(priv, channel->hw_value); | |
449 | ||
450 | out: | |
451 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
452 | return ret; | |
453 | } | |
454 | ||
455 | ||
456 | ||
457 | /*************************************************************************** | |
458 | * Scanning | |
459 | */ | |
460 | ||
461 | /* | |
462 | * When scanning, the firmware doesn't send a nul packet with the power-safe | |
463 | * bit to the AP. So we cannot stay away from our current channel too long, | |
464 | * otherwise we loose data. So take a "nap" while scanning every other | |
465 | * while. | |
466 | */ | |
467 | #define LBS_SCAN_BEFORE_NAP 4 | |
468 | ||
469 | ||
470 | /* | |
471 | * When the firmware reports back a scan-result, it gives us an "u8 rssi", | |
472 | * which isn't really an RSSI, as it becomes larger when moving away from | |
473 | * the AP. Anyway, we need to convert that into mBm. | |
474 | */ | |
475 | #define LBS_SCAN_RSSI_TO_MBM(rssi) \ | |
476 | ((-(int)rssi + 3)*100) | |
477 | ||
478 | static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, | |
479 | struct cmd_header *resp) | |
480 | { | |
481 | struct cmd_ds_802_11_scan_rsp *scanresp = (void *)resp; | |
482 | int bsssize; | |
483 | const u8 *pos; | |
e86dc1ca KD |
484 | const u8 *tsfdesc; |
485 | int tsfsize; | |
486 | int i; | |
487 | int ret = -EILSEQ; | |
488 | ||
489 | lbs_deb_enter(LBS_DEB_CFG80211); | |
490 | ||
491 | bsssize = get_unaligned_le16(&scanresp->bssdescriptsize); | |
aebb628f DW |
492 | |
493 | lbs_deb_scan("scan response: %d BSSs (%d bytes); resp size %d bytes\n", | |
65a602dd | 494 | scanresp->nr_sets, bsssize, le16_to_cpu(resp->size)); |
aebb628f | 495 | |
65a602dd | 496 | if (scanresp->nr_sets == 0) { |
aebb628f DW |
497 | ret = 0; |
498 | goto done; | |
499 | } | |
e86dc1ca KD |
500 | |
501 | /* | |
502 | * The general layout of the scan response is described in chapter | |
503 | * 5.7.1. Basically we have a common part, then any number of BSS | |
504 | * descriptor sections. Finally we have section with the same number | |
505 | * of TSFs. | |
506 | * | |
507 | * cmd_ds_802_11_scan_rsp | |
508 | * cmd_header | |
509 | * pos_size | |
510 | * nr_sets | |
511 | * bssdesc 1 | |
512 | * bssid | |
513 | * rssi | |
514 | * timestamp | |
515 | * intvl | |
516 | * capa | |
517 | * IEs | |
518 | * bssdesc 2 | |
519 | * bssdesc n | |
520 | * MrvlIEtypes_TsfFimestamp_t | |
521 | * TSF for BSS 1 | |
522 | * TSF for BSS 2 | |
523 | * TSF for BSS n | |
524 | */ | |
525 | ||
526 | pos = scanresp->bssdesc_and_tlvbuffer; | |
527 | ||
4083858c DW |
528 | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_RSP", scanresp->bssdesc_and_tlvbuffer, |
529 | scanresp->bssdescriptsize); | |
530 | ||
e86dc1ca KD |
531 | tsfdesc = pos + bsssize; |
532 | tsfsize = 4 + 8 * scanresp->nr_sets; | |
4083858c | 533 | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TSF", (u8 *) tsfdesc, tsfsize); |
e86dc1ca KD |
534 | |
535 | /* Validity check: we expect a Marvell-Local TLV */ | |
536 | i = get_unaligned_le16(tsfdesc); | |
537 | tsfdesc += 2; | |
4083858c DW |
538 | if (i != TLV_TYPE_TSFTIMESTAMP) { |
539 | lbs_deb_scan("scan response: invalid TSF Timestamp %d\n", i); | |
e86dc1ca | 540 | goto done; |
4083858c DW |
541 | } |
542 | ||
e86dc1ca KD |
543 | /* Validity check: the TLV holds TSF values with 8 bytes each, so |
544 | * the size in the TLV must match the nr_sets value */ | |
545 | i = get_unaligned_le16(tsfdesc); | |
546 | tsfdesc += 2; | |
4083858c DW |
547 | if (i / 8 != scanresp->nr_sets) { |
548 | lbs_deb_scan("scan response: invalid number of TSF timestamp " | |
549 | "sets (expected %d got %d)\n", scanresp->nr_sets, | |
550 | i / 8); | |
e86dc1ca | 551 | goto done; |
4083858c | 552 | } |
e86dc1ca KD |
553 | |
554 | for (i = 0; i < scanresp->nr_sets; i++) { | |
555 | const u8 *bssid; | |
556 | const u8 *ie; | |
557 | int left; | |
558 | int ielen; | |
559 | int rssi; | |
560 | u16 intvl; | |
561 | u16 capa; | |
562 | int chan_no = -1; | |
563 | const u8 *ssid = NULL; | |
564 | u8 ssid_len = 0; | |
565 | DECLARE_SSID_BUF(ssid_buf); | |
566 | ||
567 | int len = get_unaligned_le16(pos); | |
568 | pos += 2; | |
569 | ||
570 | /* BSSID */ | |
571 | bssid = pos; | |
572 | pos += ETH_ALEN; | |
573 | /* RSSI */ | |
574 | rssi = *pos++; | |
575 | /* Packet time stamp */ | |
576 | pos += 8; | |
577 | /* Beacon interval */ | |
578 | intvl = get_unaligned_le16(pos); | |
579 | pos += 2; | |
580 | /* Capabilities */ | |
581 | capa = get_unaligned_le16(pos); | |
582 | pos += 2; | |
583 | ||
584 | /* To find out the channel, we must parse the IEs */ | |
585 | ie = pos; | |
586 | /* 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon | |
587 | interval, capabilities */ | |
588 | ielen = left = len - (6 + 1 + 8 + 2 + 2); | |
589 | while (left >= 2) { | |
590 | u8 id, elen; | |
591 | id = *pos++; | |
592 | elen = *pos++; | |
593 | left -= 2; | |
4083858c DW |
594 | if (elen > left || elen == 0) { |
595 | lbs_deb_scan("scan response: invalid IE fmt\n"); | |
e86dc1ca | 596 | goto done; |
4083858c DW |
597 | } |
598 | ||
e86dc1ca KD |
599 | if (id == WLAN_EID_DS_PARAMS) |
600 | chan_no = *pos; | |
601 | if (id == WLAN_EID_SSID) { | |
602 | ssid = pos; | |
603 | ssid_len = elen; | |
604 | } | |
605 | left -= elen; | |
606 | pos += elen; | |
607 | } | |
608 | ||
609 | /* No channel, no luck */ | |
610 | if (chan_no != -1) { | |
611 | struct wiphy *wiphy = priv->wdev->wiphy; | |
612 | int freq = ieee80211_channel_to_frequency(chan_no); | |
613 | struct ieee80211_channel *channel = | |
614 | ieee80211_get_channel(wiphy, freq); | |
615 | ||
616 | lbs_deb_scan("scan: %pM, capa %04x, chan %2d, %s, " | |
617 | "%d dBm\n", | |
618 | bssid, capa, chan_no, | |
619 | print_ssid(ssid_buf, ssid, ssid_len), | |
620 | LBS_SCAN_RSSI_TO_MBM(rssi)/100); | |
621 | ||
622 | if (channel || | |
623 | !(channel->flags & IEEE80211_CHAN_DISABLED)) | |
624 | cfg80211_inform_bss(wiphy, channel, | |
625 | bssid, le64_to_cpu(*(__le64 *)tsfdesc), | |
626 | capa, intvl, ie, ielen, | |
627 | LBS_SCAN_RSSI_TO_MBM(rssi), | |
628 | GFP_KERNEL); | |
4083858c DW |
629 | } else |
630 | lbs_deb_scan("scan response: missing BSS channel IE\n"); | |
631 | ||
e86dc1ca KD |
632 | tsfdesc += 8; |
633 | } | |
634 | ret = 0; | |
635 | ||
636 | done: | |
637 | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); | |
638 | return ret; | |
639 | } | |
640 | ||
641 | ||
642 | /* | |
643 | * Our scan command contains a TLV, consting of a SSID TLV, a channel list | |
644 | * TLV and a rates TLV. Determine the maximum size of them: | |
645 | */ | |
646 | #define LBS_SCAN_MAX_CMD_SIZE \ | |
647 | (sizeof(struct cmd_ds_802_11_scan) \ | |
648 | + LBS_MAX_SSID_TLV_SIZE \ | |
649 | + LBS_MAX_CHANNEL_LIST_TLV_SIZE \ | |
650 | + LBS_MAX_RATES_TLV_SIZE) | |
651 | ||
652 | /* | |
653 | * Assumes priv->scan_req is initialized and valid | |
654 | * Assumes priv->scan_channel is initialized | |
655 | */ | |
656 | static void lbs_scan_worker(struct work_struct *work) | |
657 | { | |
658 | struct lbs_private *priv = | |
659 | container_of(work, struct lbs_private, scan_work.work); | |
660 | struct cmd_ds_802_11_scan *scan_cmd; | |
661 | u8 *tlv; /* pointer into our current, growing TLV storage area */ | |
662 | int last_channel; | |
663 | int running, carrier; | |
664 | ||
665 | lbs_deb_enter(LBS_DEB_SCAN); | |
666 | ||
667 | scan_cmd = kzalloc(LBS_SCAN_MAX_CMD_SIZE, GFP_KERNEL); | |
668 | if (scan_cmd == NULL) | |
669 | goto out_no_scan_cmd; | |
670 | ||
671 | /* prepare fixed part of scan command */ | |
672 | scan_cmd->bsstype = CMD_BSS_TYPE_ANY; | |
673 | ||
674 | /* stop network while we're away from our main channel */ | |
675 | running = !netif_queue_stopped(priv->dev); | |
676 | carrier = netif_carrier_ok(priv->dev); | |
677 | if (running) | |
678 | netif_stop_queue(priv->dev); | |
679 | if (carrier) | |
680 | netif_carrier_off(priv->dev); | |
681 | ||
682 | /* prepare fixed part of scan command */ | |
683 | tlv = scan_cmd->tlvbuffer; | |
684 | ||
685 | /* add SSID TLV */ | |
686 | if (priv->scan_req->n_ssids) | |
687 | tlv += lbs_add_ssid_tlv(tlv, | |
688 | priv->scan_req->ssids[0].ssid, | |
689 | priv->scan_req->ssids[0].ssid_len); | |
690 | ||
691 | /* add channel TLVs */ | |
692 | last_channel = priv->scan_channel + LBS_SCAN_BEFORE_NAP; | |
693 | if (last_channel > priv->scan_req->n_channels) | |
694 | last_channel = priv->scan_req->n_channels; | |
695 | tlv += lbs_add_channel_list_tlv(priv, tlv, last_channel, | |
696 | priv->scan_req->n_ssids); | |
697 | ||
698 | /* add rates TLV */ | |
699 | tlv += lbs_add_supported_rates_tlv(tlv); | |
700 | ||
701 | if (priv->scan_channel < priv->scan_req->n_channels) { | |
702 | cancel_delayed_work(&priv->scan_work); | |
2e30168b DD |
703 | if (!priv->stopping) |
704 | queue_delayed_work(priv->work_thread, &priv->scan_work, | |
705 | msecs_to_jiffies(300)); | |
e86dc1ca KD |
706 | } |
707 | ||
708 | /* This is the final data we are about to send */ | |
709 | scan_cmd->hdr.size = cpu_to_le16(tlv - (u8 *)scan_cmd); | |
710 | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_CMD", (void *)scan_cmd, | |
711 | sizeof(*scan_cmd)); | |
712 | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TLV", scan_cmd->tlvbuffer, | |
713 | tlv - scan_cmd->tlvbuffer); | |
714 | ||
715 | __lbs_cmd(priv, CMD_802_11_SCAN, &scan_cmd->hdr, | |
716 | le16_to_cpu(scan_cmd->hdr.size), | |
717 | lbs_ret_scan, 0); | |
718 | ||
719 | if (priv->scan_channel >= priv->scan_req->n_channels) { | |
720 | /* Mark scan done */ | |
cc026819 DW |
721 | if (priv->internal_scan) |
722 | kfree(priv->scan_req); | |
723 | else | |
724 | cfg80211_scan_done(priv->scan_req, false); | |
725 | ||
e86dc1ca | 726 | priv->scan_req = NULL; |
cc026819 | 727 | priv->last_scan = jiffies; |
e86dc1ca KD |
728 | } |
729 | ||
730 | /* Restart network */ | |
731 | if (carrier) | |
732 | netif_carrier_on(priv->dev); | |
733 | if (running && !priv->tx_pending_len) | |
734 | netif_wake_queue(priv->dev); | |
735 | ||
736 | kfree(scan_cmd); | |
737 | ||
cc026819 DW |
738 | /* Wake up anything waiting on scan completion */ |
739 | if (priv->scan_req == NULL) { | |
740 | lbs_deb_scan("scan: waking up waiters\n"); | |
741 | wake_up_all(&priv->scan_q); | |
742 | } | |
743 | ||
e86dc1ca KD |
744 | out_no_scan_cmd: |
745 | lbs_deb_leave(LBS_DEB_SCAN); | |
746 | } | |
747 | ||
cc026819 DW |
748 | static void _internal_start_scan(struct lbs_private *priv, bool internal, |
749 | struct cfg80211_scan_request *request) | |
750 | { | |
751 | lbs_deb_enter(LBS_DEB_CFG80211); | |
752 | ||
753 | lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n", | |
754 | request->n_ssids, request->n_channels, request->ie_len); | |
755 | ||
756 | priv->scan_channel = 0; | |
757 | queue_delayed_work(priv->work_thread, &priv->scan_work, | |
758 | msecs_to_jiffies(50)); | |
759 | ||
760 | priv->scan_req = request; | |
761 | priv->internal_scan = internal; | |
762 | ||
763 | lbs_deb_leave(LBS_DEB_CFG80211); | |
764 | } | |
e86dc1ca KD |
765 | |
766 | static int lbs_cfg_scan(struct wiphy *wiphy, | |
767 | struct net_device *dev, | |
768 | struct cfg80211_scan_request *request) | |
769 | { | |
770 | struct lbs_private *priv = wiphy_priv(wiphy); | |
771 | int ret = 0; | |
772 | ||
773 | lbs_deb_enter(LBS_DEB_CFG80211); | |
774 | ||
775 | if (priv->scan_req || delayed_work_pending(&priv->scan_work)) { | |
776 | /* old scan request not yet processed */ | |
777 | ret = -EAGAIN; | |
778 | goto out; | |
779 | } | |
780 | ||
cc026819 | 781 | _internal_start_scan(priv, false, request); |
e86dc1ca KD |
782 | |
783 | if (priv->surpriseremoved) | |
784 | ret = -EIO; | |
785 | ||
e86dc1ca KD |
786 | out: |
787 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
788 | return ret; | |
789 | } | |
790 | ||
791 | ||
792 | ||
793 | ||
794 | /*************************************************************************** | |
795 | * Events | |
796 | */ | |
797 | ||
798 | void lbs_send_disconnect_notification(struct lbs_private *priv) | |
799 | { | |
800 | lbs_deb_enter(LBS_DEB_CFG80211); | |
801 | ||
802 | cfg80211_disconnected(priv->dev, | |
803 | 0, | |
804 | NULL, 0, | |
805 | GFP_KERNEL); | |
806 | ||
807 | lbs_deb_leave(LBS_DEB_CFG80211); | |
808 | } | |
809 | ||
810 | void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event) | |
811 | { | |
812 | lbs_deb_enter(LBS_DEB_CFG80211); | |
813 | ||
814 | cfg80211_michael_mic_failure(priv->dev, | |
815 | priv->assoc_bss, | |
816 | event == MACREG_INT_CODE_MIC_ERR_MULTICAST ? | |
817 | NL80211_KEYTYPE_GROUP : | |
818 | NL80211_KEYTYPE_PAIRWISE, | |
819 | -1, | |
820 | NULL, | |
821 | GFP_KERNEL); | |
822 | ||
823 | lbs_deb_leave(LBS_DEB_CFG80211); | |
824 | } | |
825 | ||
826 | ||
827 | ||
828 | ||
829 | /*************************************************************************** | |
830 | * Connect/disconnect | |
831 | */ | |
832 | ||
833 | ||
834 | /* | |
835 | * This removes all WEP keys | |
836 | */ | |
837 | static int lbs_remove_wep_keys(struct lbs_private *priv) | |
838 | { | |
839 | struct cmd_ds_802_11_set_wep cmd; | |
840 | int ret; | |
841 | ||
842 | lbs_deb_enter(LBS_DEB_CFG80211); | |
843 | ||
844 | memset(&cmd, 0, sizeof(cmd)); | |
845 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
846 | cmd.keyindex = cpu_to_le16(priv->wep_tx_key); | |
847 | cmd.action = cpu_to_le16(CMD_ACT_REMOVE); | |
848 | ||
849 | ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); | |
850 | ||
851 | lbs_deb_leave(LBS_DEB_CFG80211); | |
852 | return ret; | |
853 | } | |
854 | ||
855 | /* | |
856 | * Set WEP keys | |
857 | */ | |
858 | static int lbs_set_wep_keys(struct lbs_private *priv) | |
859 | { | |
860 | struct cmd_ds_802_11_set_wep cmd; | |
861 | int i; | |
862 | int ret; | |
863 | ||
864 | lbs_deb_enter(LBS_DEB_CFG80211); | |
865 | ||
866 | /* | |
867 | * command 13 00 | |
868 | * size 50 00 | |
869 | * sequence xx xx | |
870 | * result 00 00 | |
871 | * action 02 00 ACT_ADD | |
872 | * transmit key 00 00 | |
873 | * type for key 1 01 WEP40 | |
874 | * type for key 2 00 | |
875 | * type for key 3 00 | |
876 | * type for key 4 00 | |
877 | * key 1 39 39 39 39 39 00 00 00 | |
878 | * 00 00 00 00 00 00 00 00 | |
879 | * key 2 00 00 00 00 00 00 00 00 | |
880 | * 00 00 00 00 00 00 00 00 | |
881 | * key 3 00 00 00 00 00 00 00 00 | |
882 | * 00 00 00 00 00 00 00 00 | |
883 | * key 4 00 00 00 00 00 00 00 00 | |
884 | */ | |
885 | if (priv->wep_key_len[0] || priv->wep_key_len[1] || | |
886 | priv->wep_key_len[2] || priv->wep_key_len[3]) { | |
887 | /* Only set wep keys if we have at least one of them */ | |
888 | memset(&cmd, 0, sizeof(cmd)); | |
889 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
890 | cmd.keyindex = cpu_to_le16(priv->wep_tx_key); | |
891 | cmd.action = cpu_to_le16(CMD_ACT_ADD); | |
892 | ||
893 | for (i = 0; i < 4; i++) { | |
894 | switch (priv->wep_key_len[i]) { | |
895 | case WLAN_KEY_LEN_WEP40: | |
896 | cmd.keytype[i] = CMD_TYPE_WEP_40_BIT; | |
897 | break; | |
898 | case WLAN_KEY_LEN_WEP104: | |
899 | cmd.keytype[i] = CMD_TYPE_WEP_104_BIT; | |
900 | break; | |
901 | default: | |
902 | cmd.keytype[i] = 0; | |
903 | break; | |
904 | } | |
905 | memcpy(cmd.keymaterial[i], priv->wep_key[i], | |
906 | priv->wep_key_len[i]); | |
907 | } | |
908 | ||
909 | ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); | |
910 | } else { | |
911 | /* Otherwise remove all wep keys */ | |
912 | ret = lbs_remove_wep_keys(priv); | |
913 | } | |
914 | ||
915 | lbs_deb_leave(LBS_DEB_CFG80211); | |
916 | return ret; | |
917 | } | |
918 | ||
919 | ||
920 | /* | |
921 | * Enable/Disable RSN status | |
922 | */ | |
923 | static int lbs_enable_rsn(struct lbs_private *priv, int enable) | |
924 | { | |
925 | struct cmd_ds_802_11_enable_rsn cmd; | |
926 | int ret; | |
927 | ||
928 | lbs_deb_enter_args(LBS_DEB_CFG80211, "%d", enable); | |
929 | ||
930 | /* | |
931 | * cmd 2f 00 | |
932 | * size 0c 00 | |
933 | * sequence xx xx | |
934 | * result 00 00 | |
935 | * action 01 00 ACT_SET | |
936 | * enable 01 00 | |
937 | */ | |
938 | memset(&cmd, 0, sizeof(cmd)); | |
939 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
940 | cmd.action = cpu_to_le16(CMD_ACT_SET); | |
941 | cmd.enable = cpu_to_le16(enable); | |
942 | ||
943 | ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd); | |
944 | ||
945 | lbs_deb_leave(LBS_DEB_CFG80211); | |
946 | return ret; | |
947 | } | |
948 | ||
949 | ||
950 | /* | |
951 | * Set WPA/WPA key material | |
952 | */ | |
953 | ||
954 | /* like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we | |
955 | * get rid of WEXT, this should go into host.h */ | |
956 | ||
957 | struct cmd_key_material { | |
958 | struct cmd_header hdr; | |
959 | ||
960 | __le16 action; | |
961 | struct MrvlIEtype_keyParamSet param; | |
beabe914 | 962 | } __packed; |
e86dc1ca KD |
963 | |
964 | static int lbs_set_key_material(struct lbs_private *priv, | |
965 | int key_type, | |
966 | int key_info, | |
967 | u8 *key, u16 key_len) | |
968 | { | |
969 | struct cmd_key_material cmd; | |
970 | int ret; | |
971 | ||
972 | lbs_deb_enter(LBS_DEB_CFG80211); | |
973 | ||
974 | /* | |
975 | * Example for WPA (TKIP): | |
976 | * | |
977 | * cmd 5e 00 | |
978 | * size 34 00 | |
979 | * sequence xx xx | |
980 | * result 00 00 | |
981 | * action 01 00 | |
982 | * TLV type 00 01 key param | |
983 | * length 00 26 | |
984 | * key type 01 00 TKIP | |
985 | * key info 06 00 UNICAST | ENABLED | |
986 | * key len 20 00 | |
987 | * key 32 bytes | |
988 | */ | |
989 | memset(&cmd, 0, sizeof(cmd)); | |
990 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
991 | cmd.action = cpu_to_le16(CMD_ACT_SET); | |
992 | cmd.param.type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL); | |
993 | cmd.param.length = cpu_to_le16(sizeof(cmd.param) - 4); | |
994 | cmd.param.keytypeid = cpu_to_le16(key_type); | |
995 | cmd.param.keyinfo = cpu_to_le16(key_info); | |
996 | cmd.param.keylen = cpu_to_le16(key_len); | |
997 | if (key && key_len) | |
998 | memcpy(cmd.param.key, key, key_len); | |
999 | ||
1000 | ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd); | |
1001 | ||
1002 | lbs_deb_leave(LBS_DEB_CFG80211); | |
1003 | return ret; | |
1004 | } | |
1005 | ||
1006 | ||
1007 | /* | |
1008 | * Sets the auth type (open, shared, etc) in the firmware. That | |
1009 | * we use CMD_802_11_AUTHENTICATE is misleading, this firmware | |
1010 | * command doesn't send an authentication frame at all, it just | |
1011 | * stores the auth_type. | |
1012 | */ | |
1013 | static int lbs_set_authtype(struct lbs_private *priv, | |
1014 | struct cfg80211_connect_params *sme) | |
1015 | { | |
1016 | struct cmd_ds_802_11_authenticate cmd; | |
1017 | int ret; | |
1018 | ||
1019 | lbs_deb_enter_args(LBS_DEB_CFG80211, "%d", sme->auth_type); | |
1020 | ||
1021 | /* | |
1022 | * cmd 11 00 | |
1023 | * size 19 00 | |
1024 | * sequence xx xx | |
1025 | * result 00 00 | |
1026 | * BSS id 00 13 19 80 da 30 | |
1027 | * auth type 00 | |
1028 | * reserved 00 00 00 00 00 00 00 00 00 00 | |
1029 | */ | |
1030 | memset(&cmd, 0, sizeof(cmd)); | |
1031 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1032 | if (sme->bssid) | |
1033 | memcpy(cmd.bssid, sme->bssid, ETH_ALEN); | |
1034 | /* convert auth_type */ | |
1035 | ret = lbs_auth_to_authtype(sme->auth_type); | |
1036 | if (ret < 0) | |
1037 | goto done; | |
1038 | ||
1039 | cmd.authtype = ret; | |
1040 | ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd); | |
1041 | ||
1042 | done: | |
1043 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1044 | return ret; | |
1045 | } | |
1046 | ||
1047 | ||
1048 | /* | |
1049 | * Create association request | |
1050 | */ | |
1051 | #define LBS_ASSOC_MAX_CMD_SIZE \ | |
1052 | (sizeof(struct cmd_ds_802_11_associate) \ | |
1053 | - 512 /* cmd_ds_802_11_associate.iebuf */ \ | |
1054 | + LBS_MAX_SSID_TLV_SIZE \ | |
1055 | + LBS_MAX_CHANNEL_TLV_SIZE \ | |
1056 | + LBS_MAX_CF_PARAM_TLV_SIZE \ | |
1057 | + LBS_MAX_AUTH_TYPE_TLV_SIZE \ | |
1058 | + LBS_MAX_WPA_TLV_SIZE) | |
1059 | ||
1060 | static int lbs_associate(struct lbs_private *priv, | |
1061 | struct cfg80211_bss *bss, | |
1062 | struct cfg80211_connect_params *sme) | |
1063 | { | |
1064 | struct cmd_ds_802_11_associate_response *resp; | |
1065 | struct cmd_ds_802_11_associate *cmd = kzalloc(LBS_ASSOC_MAX_CMD_SIZE, | |
1066 | GFP_KERNEL); | |
1067 | const u8 *ssid_eid; | |
1068 | size_t len, resp_ie_len; | |
1069 | int status; | |
1070 | int ret; | |
1071 | u8 *pos = &(cmd->iebuf[0]); | |
19757539 | 1072 | u8 *tmp; |
e86dc1ca KD |
1073 | |
1074 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1075 | ||
1076 | if (!cmd) { | |
1077 | ret = -ENOMEM; | |
1078 | goto done; | |
1079 | } | |
1080 | ||
1081 | /* | |
1082 | * cmd 50 00 | |
1083 | * length 34 00 | |
1084 | * sequence xx xx | |
1085 | * result 00 00 | |
1086 | * BSS id 00 13 19 80 da 30 | |
1087 | * capabilities 11 00 | |
1088 | * listen interval 0a 00 | |
1089 | * beacon interval 00 00 | |
1090 | * DTIM period 00 | |
1091 | * TLVs xx (up to 512 bytes) | |
1092 | */ | |
1093 | cmd->hdr.command = cpu_to_le16(CMD_802_11_ASSOCIATE); | |
1094 | ||
1095 | /* Fill in static fields */ | |
1096 | memcpy(cmd->bssid, bss->bssid, ETH_ALEN); | |
1097 | cmd->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL); | |
1098 | cmd->capability = cpu_to_le16(bss->capability); | |
1099 | ||
1100 | /* add SSID TLV */ | |
1101 | ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID); | |
1102 | if (ssid_eid) | |
1103 | pos += lbs_add_ssid_tlv(pos, ssid_eid + 2, ssid_eid[1]); | |
1104 | else | |
1105 | lbs_deb_assoc("no SSID\n"); | |
1106 | ||
1107 | /* add DS param TLV */ | |
1108 | if (bss->channel) | |
1109 | pos += lbs_add_channel_tlv(pos, bss->channel->hw_value); | |
1110 | else | |
1111 | lbs_deb_assoc("no channel\n"); | |
1112 | ||
1113 | /* add (empty) CF param TLV */ | |
1114 | pos += lbs_add_cf_param_tlv(pos); | |
1115 | ||
1116 | /* add rates TLV */ | |
19757539 | 1117 | tmp = pos + 4; /* skip Marvell IE header */ |
e86dc1ca | 1118 | pos += lbs_add_common_rates_tlv(pos, bss); |
19757539 | 1119 | lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp); |
e86dc1ca KD |
1120 | |
1121 | /* add auth type TLV */ | |
86df5f72 | 1122 | if (MRVL_FW_MAJOR_REV(priv->fwrelease) >= 9) |
e86dc1ca KD |
1123 | pos += lbs_add_auth_type_tlv(pos, sme->auth_type); |
1124 | ||
1125 | /* add WPA/WPA2 TLV */ | |
1126 | if (sme->ie && sme->ie_len) | |
1127 | pos += lbs_add_wpa_tlv(pos, sme->ie, sme->ie_len); | |
1128 | ||
1129 | len = (sizeof(*cmd) - sizeof(cmd->iebuf)) + | |
1130 | (u16)(pos - (u8 *) &cmd->iebuf); | |
1131 | cmd->hdr.size = cpu_to_le16(len); | |
1132 | ||
86df5f72 DW |
1133 | lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_CMD", (u8 *) cmd, |
1134 | le16_to_cpu(cmd->hdr.size)); | |
1135 | ||
e86dc1ca KD |
1136 | /* store for later use */ |
1137 | memcpy(priv->assoc_bss, bss->bssid, ETH_ALEN); | |
1138 | ||
1139 | ret = lbs_cmd_with_response(priv, CMD_802_11_ASSOCIATE, cmd); | |
1140 | if (ret) | |
1141 | goto done; | |
1142 | ||
e86dc1ca KD |
1143 | /* generate connect message to cfg80211 */ |
1144 | ||
1145 | resp = (void *) cmd; /* recast for easier field access */ | |
1146 | status = le16_to_cpu(resp->statuscode); | |
1147 | ||
86df5f72 DW |
1148 | /* Older FW versions map the IEEE 802.11 Status Code in the association |
1149 | * response to the following values returned in resp->statuscode: | |
1150 | * | |
1151 | * IEEE Status Code Marvell Status Code | |
1152 | * 0 -> 0x0000 ASSOC_RESULT_SUCCESS | |
1153 | * 13 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED | |
1154 | * 14 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED | |
1155 | * 15 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED | |
1156 | * 16 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED | |
1157 | * others -> 0x0003 ASSOC_RESULT_REFUSED | |
1158 | * | |
1159 | * Other response codes: | |
1160 | * 0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused) | |
1161 | * 0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for | |
1162 | * association response from the AP) | |
1163 | */ | |
1164 | if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) { | |
e86dc1ca KD |
1165 | switch (status) { |
1166 | case 0: | |
1167 | break; | |
1168 | case 1: | |
1169 | lbs_deb_assoc("invalid association parameters\n"); | |
1170 | status = WLAN_STATUS_CAPS_UNSUPPORTED; | |
1171 | break; | |
1172 | case 2: | |
1173 | lbs_deb_assoc("timer expired while waiting for AP\n"); | |
1174 | status = WLAN_STATUS_AUTH_TIMEOUT; | |
1175 | break; | |
1176 | case 3: | |
1177 | lbs_deb_assoc("association refused by AP\n"); | |
1178 | status = WLAN_STATUS_ASSOC_DENIED_UNSPEC; | |
1179 | break; | |
1180 | case 4: | |
1181 | lbs_deb_assoc("authentication refused by AP\n"); | |
1182 | status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; | |
1183 | break; | |
1184 | default: | |
1185 | lbs_deb_assoc("association failure %d\n", status); | |
86df5f72 DW |
1186 | /* v5 OLPC firmware does return the AP status code if |
1187 | * it's not one of the values above. Let that through. | |
1188 | */ | |
1189 | break; | |
1190 | } | |
e86dc1ca KD |
1191 | } |
1192 | ||
86df5f72 DW |
1193 | lbs_deb_assoc("status %d, statuscode 0x%04x, capability 0x%04x, " |
1194 | "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode), | |
1195 | le16_to_cpu(resp->capability), le16_to_cpu(resp->aid)); | |
e86dc1ca KD |
1196 | |
1197 | resp_ie_len = le16_to_cpu(resp->hdr.size) | |
1198 | - sizeof(resp->hdr) | |
1199 | - 6; | |
1200 | cfg80211_connect_result(priv->dev, | |
1201 | priv->assoc_bss, | |
1202 | sme->ie, sme->ie_len, | |
1203 | resp->iebuf, resp_ie_len, | |
1204 | status, | |
1205 | GFP_KERNEL); | |
1206 | ||
1207 | if (status == 0) { | |
1208 | /* TODO: get rid of priv->connect_status */ | |
1209 | priv->connect_status = LBS_CONNECTED; | |
1210 | netif_carrier_on(priv->dev); | |
1211 | if (!priv->tx_pending_len) | |
1212 | netif_tx_wake_all_queues(priv->dev); | |
1213 | } | |
1214 | ||
e86dc1ca KD |
1215 | done: |
1216 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1217 | return ret; | |
1218 | } | |
1219 | ||
cc026819 DW |
1220 | static struct cfg80211_scan_request * |
1221 | _new_connect_scan_req(struct wiphy *wiphy, struct cfg80211_connect_params *sme) | |
1222 | { | |
1223 | struct cfg80211_scan_request *creq = NULL; | |
1224 | int i, n_channels = 0; | |
1225 | enum ieee80211_band band; | |
1226 | ||
1227 | for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | |
1228 | if (wiphy->bands[band]) | |
1229 | n_channels += wiphy->bands[band]->n_channels; | |
1230 | } | |
1231 | ||
1232 | creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) + | |
1233 | n_channels * sizeof(void *), | |
1234 | GFP_ATOMIC); | |
1235 | if (!creq) | |
1236 | return NULL; | |
1237 | ||
1238 | /* SSIDs come after channels */ | |
1239 | creq->ssids = (void *)&creq->channels[n_channels]; | |
1240 | creq->n_channels = n_channels; | |
1241 | creq->n_ssids = 1; | |
1242 | ||
1243 | /* Scan all available channels */ | |
1244 | i = 0; | |
1245 | for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | |
1246 | int j; | |
1247 | ||
1248 | if (!wiphy->bands[band]) | |
1249 | continue; | |
1250 | ||
1251 | for (j = 0; j < wiphy->bands[band]->n_channels; j++) { | |
1252 | /* ignore disabled channels */ | |
1253 | if (wiphy->bands[band]->channels[j].flags & | |
1254 | IEEE80211_CHAN_DISABLED) | |
1255 | continue; | |
1256 | ||
1257 | creq->channels[i] = &wiphy->bands[band]->channels[j]; | |
1258 | i++; | |
1259 | } | |
1260 | } | |
1261 | if (i) { | |
1262 | /* Set real number of channels specified in creq->channels[] */ | |
1263 | creq->n_channels = i; | |
1264 | ||
1265 | /* Scan for the SSID we're going to connect to */ | |
1266 | memcpy(creq->ssids[0].ssid, sme->ssid, sme->ssid_len); | |
1267 | creq->ssids[0].ssid_len = sme->ssid_len; | |
1268 | } else { | |
1269 | /* No channels found... */ | |
1270 | kfree(creq); | |
1271 | creq = NULL; | |
1272 | } | |
e86dc1ca | 1273 | |
cc026819 DW |
1274 | return creq; |
1275 | } | |
e86dc1ca KD |
1276 | |
1277 | static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, | |
1278 | struct cfg80211_connect_params *sme) | |
1279 | { | |
1280 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1281 | struct cfg80211_bss *bss = NULL; | |
1282 | int ret = 0; | |
1283 | u8 preamble = RADIO_PREAMBLE_SHORT; | |
1284 | ||
1285 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1286 | ||
cc026819 DW |
1287 | if (!sme->bssid) { |
1288 | /* Run a scan if one isn't in-progress already and if the last | |
1289 | * scan was done more than 2 seconds ago. | |
e86dc1ca | 1290 | */ |
cc026819 DW |
1291 | if (priv->scan_req == NULL && |
1292 | time_after(jiffies, priv->last_scan + (2 * HZ))) { | |
1293 | struct cfg80211_scan_request *creq; | |
e86dc1ca | 1294 | |
cc026819 DW |
1295 | creq = _new_connect_scan_req(wiphy, sme); |
1296 | if (!creq) { | |
1297 | ret = -EINVAL; | |
1298 | goto done; | |
1299 | } | |
1300 | ||
1301 | lbs_deb_assoc("assoc: scanning for compatible AP\n"); | |
1302 | _internal_start_scan(priv, true, creq); | |
1303 | } | |
1304 | ||
1305 | /* Wait for any in-progress scan to complete */ | |
1306 | lbs_deb_assoc("assoc: waiting for scan to complete\n"); | |
1307 | wait_event_interruptible_timeout(priv->scan_q, | |
1308 | (priv->scan_req == NULL), | |
1309 | (15 * HZ)); | |
1310 | lbs_deb_assoc("assoc: scanning competed\n"); | |
1311 | } | |
e86dc1ca | 1312 | |
cc026819 DW |
1313 | /* Find the BSS we want using available scan results */ |
1314 | bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid, | |
1315 | sme->ssid, sme->ssid_len, | |
1316 | WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS); | |
e86dc1ca | 1317 | if (!bss) { |
cc026819 | 1318 | lbs_pr_err("assoc: bss %pM not in scan results\n", |
e86dc1ca KD |
1319 | sme->bssid); |
1320 | ret = -ENOENT; | |
1321 | goto done; | |
1322 | } | |
cc026819 | 1323 | lbs_deb_assoc("trying %pM\n", bss->bssid); |
e86dc1ca KD |
1324 | lbs_deb_assoc("cipher 0x%x, key index %d, key len %d\n", |
1325 | sme->crypto.cipher_group, | |
1326 | sme->key_idx, sme->key_len); | |
1327 | ||
1328 | /* As this is a new connection, clear locally stored WEP keys */ | |
1329 | priv->wep_tx_key = 0; | |
1330 | memset(priv->wep_key, 0, sizeof(priv->wep_key)); | |
1331 | memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len)); | |
1332 | ||
1333 | /* set/remove WEP keys */ | |
1334 | switch (sme->crypto.cipher_group) { | |
1335 | case WLAN_CIPHER_SUITE_WEP40: | |
1336 | case WLAN_CIPHER_SUITE_WEP104: | |
1337 | /* Store provided WEP keys in priv-> */ | |
1338 | priv->wep_tx_key = sme->key_idx; | |
1339 | priv->wep_key_len[sme->key_idx] = sme->key_len; | |
1340 | memcpy(priv->wep_key[sme->key_idx], sme->key, sme->key_len); | |
1341 | /* Set WEP keys and WEP mode */ | |
1342 | lbs_set_wep_keys(priv); | |
1343 | priv->mac_control |= CMD_ACT_MAC_WEP_ENABLE; | |
1344 | lbs_set_mac_control(priv); | |
1345 | /* No RSN mode for WEP */ | |
1346 | lbs_enable_rsn(priv, 0); | |
1347 | break; | |
1348 | case 0: /* there's no WLAN_CIPHER_SUITE_NONE definition */ | |
1349 | /* | |
1350 | * If we don't have no WEP, no WPA and no WPA2, | |
1351 | * we remove all keys like in the WPA/WPA2 setup, | |
1352 | * we just don't set RSN. | |
1353 | * | |
1354 | * Therefore: fall-throught | |
1355 | */ | |
1356 | case WLAN_CIPHER_SUITE_TKIP: | |
1357 | case WLAN_CIPHER_SUITE_CCMP: | |
1358 | /* Remove WEP keys and WEP mode */ | |
1359 | lbs_remove_wep_keys(priv); | |
1360 | priv->mac_control &= ~CMD_ACT_MAC_WEP_ENABLE; | |
1361 | lbs_set_mac_control(priv); | |
1362 | ||
1363 | /* clear the WPA/WPA2 keys */ | |
1364 | lbs_set_key_material(priv, | |
1365 | KEY_TYPE_ID_WEP, /* doesn't matter */ | |
1366 | KEY_INFO_WPA_UNICAST, | |
1367 | NULL, 0); | |
1368 | lbs_set_key_material(priv, | |
1369 | KEY_TYPE_ID_WEP, /* doesn't matter */ | |
1370 | KEY_INFO_WPA_MCAST, | |
1371 | NULL, 0); | |
1372 | /* RSN mode for WPA/WPA2 */ | |
1373 | lbs_enable_rsn(priv, sme->crypto.cipher_group != 0); | |
1374 | break; | |
1375 | default: | |
1376 | lbs_pr_err("unsupported cipher group 0x%x\n", | |
1377 | sme->crypto.cipher_group); | |
1378 | ret = -ENOTSUPP; | |
1379 | goto done; | |
1380 | } | |
1381 | ||
1382 | lbs_set_authtype(priv, sme); | |
1383 | lbs_set_radio(priv, preamble, 1); | |
1384 | ||
1385 | /* Do the actual association */ | |
cc026819 | 1386 | ret = lbs_associate(priv, bss, sme); |
e86dc1ca KD |
1387 | |
1388 | done: | |
1389 | if (bss) | |
1390 | cfg80211_put_bss(bss); | |
1391 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1392 | return ret; | |
1393 | } | |
1394 | ||
e86dc1ca KD |
1395 | static int lbs_cfg_disconnect(struct wiphy *wiphy, struct net_device *dev, |
1396 | u16 reason_code) | |
1397 | { | |
1398 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1399 | struct cmd_ds_802_11_deauthenticate cmd; | |
ff9fc791 | 1400 | |
e86dc1ca | 1401 | lbs_deb_enter_args(LBS_DEB_CFG80211, "reason_code %d", reason_code); |
ff9fc791 | 1402 | |
e86dc1ca KD |
1403 | /* store for lbs_cfg_ret_disconnect() */ |
1404 | priv->disassoc_reason = reason_code; | |
1405 | ||
1406 | memset(&cmd, 0, sizeof(cmd)); | |
1407 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1408 | /* Mildly ugly to use a locally store my own BSSID ... */ | |
1409 | memcpy(cmd.macaddr, &priv->assoc_bss, ETH_ALEN); | |
1410 | cmd.reasoncode = cpu_to_le16(reason_code); | |
1411 | ||
e4fe4eaf KD |
1412 | if (lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd)) |
1413 | return -EFAULT; | |
1414 | ||
1415 | cfg80211_disconnected(priv->dev, | |
1416 | priv->disassoc_reason, | |
1417 | NULL, 0, | |
1418 | GFP_KERNEL); | |
1419 | priv->connect_status = LBS_DISCONNECTED; | |
e86dc1ca KD |
1420 | |
1421 | return 0; | |
1422 | } | |
1423 | ||
1424 | ||
1425 | static int lbs_cfg_set_default_key(struct wiphy *wiphy, | |
1426 | struct net_device *netdev, | |
1427 | u8 key_index) | |
1428 | { | |
1429 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1430 | ||
1431 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1432 | ||
1433 | if (key_index != priv->wep_tx_key) { | |
1434 | lbs_deb_assoc("set_default_key: to %d\n", key_index); | |
1435 | priv->wep_tx_key = key_index; | |
1436 | lbs_set_wep_keys(priv); | |
1437 | } | |
1438 | ||
1439 | return 0; | |
1440 | } | |
1441 | ||
1442 | ||
1443 | static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev, | |
e31b8213 | 1444 | u8 idx, bool pairwise, const u8 *mac_addr, |
e86dc1ca KD |
1445 | struct key_params *params) |
1446 | { | |
1447 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1448 | u16 key_info; | |
1449 | u16 key_type; | |
1450 | int ret = 0; | |
1451 | ||
1452 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1453 | ||
1454 | lbs_deb_assoc("add_key: cipher 0x%x, mac_addr %pM\n", | |
1455 | params->cipher, mac_addr); | |
1456 | lbs_deb_assoc("add_key: key index %d, key len %d\n", | |
1457 | idx, params->key_len); | |
1458 | if (params->key_len) | |
1459 | lbs_deb_hex(LBS_DEB_CFG80211, "KEY", | |
1460 | params->key, params->key_len); | |
1461 | ||
1462 | lbs_deb_assoc("add_key: seq len %d\n", params->seq_len); | |
1463 | if (params->seq_len) | |
1464 | lbs_deb_hex(LBS_DEB_CFG80211, "SEQ", | |
1465 | params->seq, params->seq_len); | |
1466 | ||
1467 | switch (params->cipher) { | |
1468 | case WLAN_CIPHER_SUITE_WEP40: | |
1469 | case WLAN_CIPHER_SUITE_WEP104: | |
1470 | /* actually compare if something has changed ... */ | |
1471 | if ((priv->wep_key_len[idx] != params->key_len) || | |
1472 | memcmp(priv->wep_key[idx], | |
1473 | params->key, params->key_len) != 0) { | |
1474 | priv->wep_key_len[idx] = params->key_len; | |
1475 | memcpy(priv->wep_key[idx], | |
1476 | params->key, params->key_len); | |
1477 | lbs_set_wep_keys(priv); | |
1478 | } | |
1479 | break; | |
1480 | case WLAN_CIPHER_SUITE_TKIP: | |
1481 | case WLAN_CIPHER_SUITE_CCMP: | |
1482 | key_info = KEY_INFO_WPA_ENABLED | ((idx == 0) | |
1483 | ? KEY_INFO_WPA_UNICAST | |
1484 | : KEY_INFO_WPA_MCAST); | |
1485 | key_type = (params->cipher == WLAN_CIPHER_SUITE_TKIP) | |
1486 | ? KEY_TYPE_ID_TKIP | |
1487 | : KEY_TYPE_ID_AES; | |
1488 | lbs_set_key_material(priv, | |
1489 | key_type, | |
1490 | key_info, | |
1491 | params->key, params->key_len); | |
1492 | break; | |
1493 | default: | |
1494 | lbs_pr_err("unhandled cipher 0x%x\n", params->cipher); | |
1495 | ret = -ENOTSUPP; | |
1496 | break; | |
1497 | } | |
1498 | ||
1499 | return ret; | |
1500 | } | |
1501 | ||
1502 | ||
1503 | static int lbs_cfg_del_key(struct wiphy *wiphy, struct net_device *netdev, | |
e31b8213 | 1504 | u8 key_index, bool pairwise, const u8 *mac_addr) |
e86dc1ca KD |
1505 | { |
1506 | ||
1507 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1508 | ||
1509 | lbs_deb_assoc("del_key: key_idx %d, mac_addr %pM\n", | |
1510 | key_index, mac_addr); | |
1511 | ||
1512 | #ifdef TODO | |
1513 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1514 | /* | |
1515 | * I think can keep this a NO-OP, because: | |
1516 | ||
1517 | * - we clear all keys whenever we do lbs_cfg_connect() anyway | |
1518 | * - neither "iw" nor "wpa_supplicant" won't call this during | |
1519 | * an ongoing connection | |
1520 | * - TODO: but I have to check if this is still true when | |
1521 | * I set the AP to periodic re-keying | |
1522 | * - we've not kzallec() something when we've added a key at | |
1523 | * lbs_cfg_connect() or lbs_cfg_add_key(). | |
1524 | * | |
1525 | * This causes lbs_cfg_del_key() only called at disconnect time, | |
1526 | * where we'd just waste time deleting a key that is not going | |
1527 | * to be used anyway. | |
1528 | */ | |
1529 | if (key_index < 3 && priv->wep_key_len[key_index]) { | |
1530 | priv->wep_key_len[key_index] = 0; | |
1531 | lbs_set_wep_keys(priv); | |
1532 | } | |
1533 | #endif | |
1534 | ||
1535 | return 0; | |
1536 | } | |
1537 | ||
1538 | ||
e86dc1ca KD |
1539 | /*************************************************************************** |
1540 | * Get station | |
1541 | */ | |
1542 | ||
e86dc1ca KD |
1543 | static int lbs_cfg_get_station(struct wiphy *wiphy, struct net_device *dev, |
1544 | u8 *mac, struct station_info *sinfo) | |
1545 | { | |
1546 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1547 | s8 signal, noise; | |
1548 | int ret; | |
1549 | size_t i; | |
1550 | ||
1551 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1552 | ||
1553 | sinfo->filled |= STATION_INFO_TX_BYTES | | |
1554 | STATION_INFO_TX_PACKETS | | |
1555 | STATION_INFO_RX_BYTES | | |
1556 | STATION_INFO_RX_PACKETS; | |
1557 | sinfo->tx_bytes = priv->dev->stats.tx_bytes; | |
1558 | sinfo->tx_packets = priv->dev->stats.tx_packets; | |
1559 | sinfo->rx_bytes = priv->dev->stats.rx_bytes; | |
1560 | sinfo->rx_packets = priv->dev->stats.rx_packets; | |
1561 | ||
1562 | /* Get current RSSI */ | |
9fb7663d | 1563 | ret = lbs_get_rssi(priv, &signal, &noise); |
e86dc1ca KD |
1564 | if (ret == 0) { |
1565 | sinfo->signal = signal; | |
1566 | sinfo->filled |= STATION_INFO_SIGNAL; | |
1567 | } | |
1568 | ||
1569 | /* Convert priv->cur_rate from hw_value to NL80211 value */ | |
1570 | for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { | |
1571 | if (priv->cur_rate == lbs_rates[i].hw_value) { | |
1572 | sinfo->txrate.legacy = lbs_rates[i].bitrate; | |
1573 | sinfo->filled |= STATION_INFO_TX_BITRATE; | |
1574 | break; | |
1575 | } | |
1576 | } | |
1577 | ||
1578 | return 0; | |
1579 | } | |
1580 | ||
1581 | ||
1582 | ||
1583 | ||
1584 | /*************************************************************************** | |
1585 | * "Site survey", here just current channel and noise level | |
1586 | */ | |
1587 | ||
1588 | static int lbs_get_survey(struct wiphy *wiphy, struct net_device *dev, | |
1589 | int idx, struct survey_info *survey) | |
1590 | { | |
1591 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1592 | s8 signal, noise; | |
1593 | int ret; | |
1594 | ||
1595 | if (idx != 0) | |
1596 | ret = -ENOENT; | |
1597 | ||
1598 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1599 | ||
1600 | survey->channel = ieee80211_get_channel(wiphy, | |
1601 | ieee80211_channel_to_frequency(priv->channel)); | |
1602 | ||
9fb7663d | 1603 | ret = lbs_get_rssi(priv, &signal, &noise); |
e86dc1ca KD |
1604 | if (ret == 0) { |
1605 | survey->filled = SURVEY_INFO_NOISE_DBM; | |
1606 | survey->noise = noise; | |
1607 | } | |
1608 | ||
1609 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1610 | return ret; | |
1611 | } | |
1612 | ||
1613 | ||
1614 | ||
1615 | ||
1616 | /*************************************************************************** | |
1617 | * Change interface | |
1618 | */ | |
1619 | ||
1620 | static int lbs_change_intf(struct wiphy *wiphy, struct net_device *dev, | |
1621 | enum nl80211_iftype type, u32 *flags, | |
1622 | struct vif_params *params) | |
1623 | { | |
1624 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1625 | int ret = 0; | |
1626 | ||
1627 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1628 | ||
1629 | switch (type) { | |
1630 | case NL80211_IFTYPE_MONITOR: | |
a45b6f4f | 1631 | ret = lbs_set_monitor_mode(priv, 1); |
e86dc1ca KD |
1632 | break; |
1633 | case NL80211_IFTYPE_STATION: | |
1634 | if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) | |
a45b6f4f | 1635 | ret = lbs_set_monitor_mode(priv, 0); |
e86dc1ca KD |
1636 | if (!ret) |
1637 | ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, 1); | |
1638 | break; | |
1639 | case NL80211_IFTYPE_ADHOC: | |
1640 | if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) | |
a45b6f4f | 1641 | ret = lbs_set_monitor_mode(priv, 0); |
e86dc1ca KD |
1642 | if (!ret) |
1643 | ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, 2); | |
1644 | break; | |
1645 | default: | |
1646 | ret = -ENOTSUPP; | |
1647 | } | |
1648 | ||
1649 | if (!ret) | |
1650 | priv->wdev->iftype = type; | |
1651 | ||
1652 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1653 | return ret; | |
1654 | } | |
1655 | ||
1656 | ||
1657 | ||
1658 | /*************************************************************************** | |
1659 | * IBSS (Ad-Hoc) | |
1660 | */ | |
1661 | ||
1662 | /* The firmware needs the following bits masked out of the beacon-derived | |
1663 | * capability field when associating/joining to a BSS: | |
1664 | * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused) | |
1665 | */ | |
1666 | #define CAPINFO_MASK (~(0xda00)) | |
1667 | ||
1668 | ||
1669 | static void lbs_join_post(struct lbs_private *priv, | |
1670 | struct cfg80211_ibss_params *params, | |
1671 | u8 *bssid, u16 capability) | |
1672 | { | |
1673 | u8 fake_ie[2 + IEEE80211_MAX_SSID_LEN + /* ssid */ | |
1674 | 2 + 4 + /* basic rates */ | |
1675 | 2 + 1 + /* DS parameter */ | |
1676 | 2 + 2 + /* atim */ | |
1677 | 2 + 8]; /* extended rates */ | |
1678 | u8 *fake = fake_ie; | |
1679 | ||
1680 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1681 | ||
1682 | /* | |
1683 | * For cfg80211_inform_bss, we'll need a fake IE, as we can't get | |
1684 | * the real IE from the firmware. So we fabricate a fake IE based on | |
1685 | * what the firmware actually sends (sniffed with wireshark). | |
1686 | */ | |
1687 | /* Fake SSID IE */ | |
1688 | *fake++ = WLAN_EID_SSID; | |
1689 | *fake++ = params->ssid_len; | |
1690 | memcpy(fake, params->ssid, params->ssid_len); | |
1691 | fake += params->ssid_len; | |
1692 | /* Fake supported basic rates IE */ | |
1693 | *fake++ = WLAN_EID_SUPP_RATES; | |
1694 | *fake++ = 4; | |
1695 | *fake++ = 0x82; | |
1696 | *fake++ = 0x84; | |
1697 | *fake++ = 0x8b; | |
1698 | *fake++ = 0x96; | |
1699 | /* Fake DS channel IE */ | |
1700 | *fake++ = WLAN_EID_DS_PARAMS; | |
1701 | *fake++ = 1; | |
1702 | *fake++ = params->channel->hw_value; | |
1703 | /* Fake IBSS params IE */ | |
1704 | *fake++ = WLAN_EID_IBSS_PARAMS; | |
1705 | *fake++ = 2; | |
1706 | *fake++ = 0; /* ATIM=0 */ | |
1707 | *fake++ = 0; | |
1708 | /* Fake extended rates IE, TODO: don't add this for 802.11b only, | |
1709 | * but I don't know how this could be checked */ | |
1710 | *fake++ = WLAN_EID_EXT_SUPP_RATES; | |
1711 | *fake++ = 8; | |
1712 | *fake++ = 0x0c; | |
1713 | *fake++ = 0x12; | |
1714 | *fake++ = 0x18; | |
1715 | *fake++ = 0x24; | |
1716 | *fake++ = 0x30; | |
1717 | *fake++ = 0x48; | |
1718 | *fake++ = 0x60; | |
1719 | *fake++ = 0x6c; | |
1720 | lbs_deb_hex(LBS_DEB_CFG80211, "IE", fake_ie, fake - fake_ie); | |
1721 | ||
1722 | cfg80211_inform_bss(priv->wdev->wiphy, | |
1723 | params->channel, | |
1724 | bssid, | |
1725 | 0, | |
1726 | capability, | |
1727 | params->beacon_interval, | |
1728 | fake_ie, fake - fake_ie, | |
1729 | 0, GFP_KERNEL); | |
e4fe4eaf KD |
1730 | |
1731 | memcpy(priv->wdev->ssid, params->ssid, params->ssid_len); | |
1732 | priv->wdev->ssid_len = params->ssid_len; | |
1733 | ||
e86dc1ca KD |
1734 | cfg80211_ibss_joined(priv->dev, bssid, GFP_KERNEL); |
1735 | ||
1736 | /* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */ | |
1737 | priv->connect_status = LBS_CONNECTED; | |
1738 | netif_carrier_on(priv->dev); | |
1739 | if (!priv->tx_pending_len) | |
1740 | netif_wake_queue(priv->dev); | |
1741 | ||
1742 | lbs_deb_leave(LBS_DEB_CFG80211); | |
1743 | } | |
1744 | ||
1745 | static int lbs_ibss_join_existing(struct lbs_private *priv, | |
1746 | struct cfg80211_ibss_params *params, | |
1747 | struct cfg80211_bss *bss) | |
1748 | { | |
1749 | const u8 *rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); | |
1750 | struct cmd_ds_802_11_ad_hoc_join cmd; | |
1751 | u8 preamble = RADIO_PREAMBLE_SHORT; | |
1752 | int ret = 0; | |
1753 | ||
1754 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1755 | ||
1756 | /* TODO: set preamble based on scan result */ | |
1757 | ret = lbs_set_radio(priv, preamble, 1); | |
1758 | if (ret) | |
1759 | goto out; | |
1760 | ||
1761 | /* | |
1762 | * Example CMD_802_11_AD_HOC_JOIN command: | |
1763 | * | |
1764 | * command 2c 00 CMD_802_11_AD_HOC_JOIN | |
1765 | * size 65 00 | |
1766 | * sequence xx xx | |
1767 | * result 00 00 | |
1768 | * bssid 02 27 27 97 2f 96 | |
1769 | * ssid 49 42 53 53 00 00 00 00 | |
1770 | * 00 00 00 00 00 00 00 00 | |
1771 | * 00 00 00 00 00 00 00 00 | |
1772 | * 00 00 00 00 00 00 00 00 | |
1773 | * type 02 CMD_BSS_TYPE_IBSS | |
1774 | * beacon period 64 00 | |
1775 | * dtim period 00 | |
1776 | * timestamp 00 00 00 00 00 00 00 00 | |
1777 | * localtime 00 00 00 00 00 00 00 00 | |
1778 | * IE DS 03 | |
1779 | * IE DS len 01 | |
1780 | * IE DS channel 01 | |
1781 | * reserveed 00 00 00 00 | |
1782 | * IE IBSS 06 | |
1783 | * IE IBSS len 02 | |
1784 | * IE IBSS atim 00 00 | |
1785 | * reserved 00 00 00 00 | |
1786 | * capability 02 00 | |
1787 | * rates 82 84 8b 96 0c 12 18 24 30 48 60 6c 00 | |
1788 | * fail timeout ff 00 | |
1789 | * probe delay 00 00 | |
1790 | */ | |
1791 | memset(&cmd, 0, sizeof(cmd)); | |
1792 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1793 | ||
1794 | memcpy(cmd.bss.bssid, bss->bssid, ETH_ALEN); | |
1795 | memcpy(cmd.bss.ssid, params->ssid, params->ssid_len); | |
1796 | cmd.bss.type = CMD_BSS_TYPE_IBSS; | |
1797 | cmd.bss.beaconperiod = cpu_to_le16(params->beacon_interval); | |
1798 | cmd.bss.ds.header.id = WLAN_EID_DS_PARAMS; | |
1799 | cmd.bss.ds.header.len = 1; | |
1800 | cmd.bss.ds.channel = params->channel->hw_value; | |
1801 | cmd.bss.ibss.header.id = WLAN_EID_IBSS_PARAMS; | |
1802 | cmd.bss.ibss.header.len = 2; | |
1803 | cmd.bss.ibss.atimwindow = 0; | |
1804 | cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); | |
1805 | ||
1806 | /* set rates to the intersection of our rates and the rates in the | |
1807 | bss */ | |
1808 | if (!rates_eid) { | |
1809 | lbs_add_rates(cmd.bss.rates); | |
1810 | } else { | |
1811 | int hw, i; | |
1812 | u8 rates_max = rates_eid[1]; | |
1813 | u8 *rates = cmd.bss.rates; | |
1814 | for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { | |
1815 | u8 hw_rate = lbs_rates[hw].bitrate / 5; | |
1816 | for (i = 0; i < rates_max; i++) { | |
1817 | if (hw_rate == (rates_eid[i+2] & 0x7f)) { | |
1818 | u8 rate = rates_eid[i+2]; | |
1819 | if (rate == 0x02 || rate == 0x04 || | |
1820 | rate == 0x0b || rate == 0x16) | |
1821 | rate |= 0x80; | |
1822 | *rates++ = rate; | |
1823 | } | |
1824 | } | |
1825 | } | |
1826 | } | |
1827 | ||
1828 | /* Only v8 and below support setting this */ | |
1829 | if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) { | |
1830 | cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT); | |
1831 | cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); | |
1832 | } | |
1833 | ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd); | |
1834 | if (ret) | |
1835 | goto out; | |
1836 | ||
1837 | /* | |
1838 | * This is a sample response to CMD_802_11_AD_HOC_JOIN: | |
1839 | * | |
1840 | * response 2c 80 | |
1841 | * size 09 00 | |
1842 | * sequence xx xx | |
1843 | * result 00 00 | |
1844 | * reserved 00 | |
1845 | */ | |
1846 | lbs_join_post(priv, params, bss->bssid, bss->capability); | |
1847 | ||
1848 | out: | |
1849 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1850 | return ret; | |
1851 | } | |
1852 | ||
1853 | ||
1854 | ||
1855 | static int lbs_ibss_start_new(struct lbs_private *priv, | |
1856 | struct cfg80211_ibss_params *params) | |
1857 | { | |
1858 | struct cmd_ds_802_11_ad_hoc_start cmd; | |
1859 | struct cmd_ds_802_11_ad_hoc_result *resp = | |
1860 | (struct cmd_ds_802_11_ad_hoc_result *) &cmd; | |
1861 | u8 preamble = RADIO_PREAMBLE_SHORT; | |
1862 | int ret = 0; | |
1863 | u16 capability; | |
1864 | ||
1865 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1866 | ||
1867 | ret = lbs_set_radio(priv, preamble, 1); | |
1868 | if (ret) | |
1869 | goto out; | |
1870 | ||
1871 | /* | |
1872 | * Example CMD_802_11_AD_HOC_START command: | |
1873 | * | |
1874 | * command 2b 00 CMD_802_11_AD_HOC_START | |
1875 | * size b1 00 | |
1876 | * sequence xx xx | |
1877 | * result 00 00 | |
1878 | * ssid 54 45 53 54 00 00 00 00 | |
1879 | * 00 00 00 00 00 00 00 00 | |
1880 | * 00 00 00 00 00 00 00 00 | |
1881 | * 00 00 00 00 00 00 00 00 | |
1882 | * bss type 02 | |
1883 | * beacon period 64 00 | |
1884 | * dtim period 00 | |
1885 | * IE IBSS 06 | |
1886 | * IE IBSS len 02 | |
1887 | * IE IBSS atim 00 00 | |
1888 | * reserved 00 00 00 00 | |
1889 | * IE DS 03 | |
1890 | * IE DS len 01 | |
1891 | * IE DS channel 01 | |
1892 | * reserved 00 00 00 00 | |
1893 | * probe delay 00 00 | |
1894 | * capability 02 00 | |
1895 | * rates 82 84 8b 96 (basic rates with have bit 7 set) | |
1896 | * 0c 12 18 24 30 48 60 6c | |
1897 | * padding 100 bytes | |
1898 | */ | |
1899 | memset(&cmd, 0, sizeof(cmd)); | |
1900 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1901 | memcpy(cmd.ssid, params->ssid, params->ssid_len); | |
1902 | cmd.bsstype = CMD_BSS_TYPE_IBSS; | |
1903 | cmd.beaconperiod = cpu_to_le16(params->beacon_interval); | |
1904 | cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS; | |
1905 | cmd.ibss.header.len = 2; | |
1906 | cmd.ibss.atimwindow = 0; | |
1907 | cmd.ds.header.id = WLAN_EID_DS_PARAMS; | |
1908 | cmd.ds.header.len = 1; | |
1909 | cmd.ds.channel = params->channel->hw_value; | |
1910 | /* Only v8 and below support setting probe delay */ | |
1911 | if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) | |
1912 | cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); | |
1913 | /* TODO: mix in WLAN_CAPABILITY_PRIVACY */ | |
1914 | capability = WLAN_CAPABILITY_IBSS; | |
1915 | cmd.capability = cpu_to_le16(capability); | |
1916 | lbs_add_rates(cmd.rates); | |
1917 | ||
1918 | ||
1919 | ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd); | |
1920 | if (ret) | |
1921 | goto out; | |
1922 | ||
1923 | /* | |
1924 | * This is a sample response to CMD_802_11_AD_HOC_JOIN: | |
1925 | * | |
1926 | * response 2b 80 | |
1927 | * size 14 00 | |
1928 | * sequence xx xx | |
1929 | * result 00 00 | |
1930 | * reserved 00 | |
1931 | * bssid 02 2b 7b 0f 86 0e | |
1932 | */ | |
1933 | lbs_join_post(priv, params, resp->bssid, capability); | |
1934 | ||
1935 | out: | |
1936 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1937 | return ret; | |
1938 | } | |
1939 | ||
1940 | ||
1941 | static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev, | |
1942 | struct cfg80211_ibss_params *params) | |
1943 | { | |
1944 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1945 | int ret = 0; | |
1946 | struct cfg80211_bss *bss; | |
1947 | DECLARE_SSID_BUF(ssid_buf); | |
1948 | ||
1949 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1950 | ||
1951 | if (!params->channel) { | |
1952 | ret = -ENOTSUPP; | |
1953 | goto out; | |
1954 | } | |
1955 | ||
1956 | ret = lbs_set_channel(priv, params->channel->hw_value); | |
1957 | if (ret) | |
ff9fc791 HS |
1958 | goto out; |
1959 | ||
e86dc1ca KD |
1960 | /* Search if someone is beaconing. This assumes that the |
1961 | * bss list is populated already */ | |
1962 | bss = cfg80211_get_bss(wiphy, params->channel, params->bssid, | |
1963 | params->ssid, params->ssid_len, | |
1964 | WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); | |
1965 | ||
1966 | if (bss) { | |
1967 | ret = lbs_ibss_join_existing(priv, params, bss); | |
1968 | cfg80211_put_bss(bss); | |
1969 | } else | |
1970 | ret = lbs_ibss_start_new(priv, params); | |
1971 | ||
ff9fc791 HS |
1972 | |
1973 | out: | |
1974 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1975 | return ret; | |
1976 | } | |
1977 | ||
1978 | ||
e86dc1ca KD |
1979 | static int lbs_leave_ibss(struct wiphy *wiphy, struct net_device *dev) |
1980 | { | |
1981 | struct lbs_private *priv = wiphy_priv(wiphy); | |
1982 | struct cmd_ds_802_11_ad_hoc_stop cmd; | |
1983 | int ret = 0; | |
1984 | ||
1985 | lbs_deb_enter(LBS_DEB_CFG80211); | |
1986 | ||
1987 | memset(&cmd, 0, sizeof(cmd)); | |
1988 | cmd.hdr.size = cpu_to_le16(sizeof(cmd)); | |
1989 | ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd); | |
1990 | ||
1991 | /* TODO: consider doing this at MACREG_INT_CODE_ADHOC_BCN_LOST time */ | |
1992 | lbs_mac_event_disconnected(priv); | |
1993 | ||
1994 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
1995 | return ret; | |
1996 | } | |
1997 | ||
ff9fc791 HS |
1998 | |
1999 | ||
e86dc1ca KD |
2000 | |
2001 | /*************************************************************************** | |
2002 | * Initialization | |
2003 | */ | |
2004 | ||
ff9fc791 HS |
2005 | static struct cfg80211_ops lbs_cfg80211_ops = { |
2006 | .set_channel = lbs_cfg_set_channel, | |
e86dc1ca KD |
2007 | .scan = lbs_cfg_scan, |
2008 | .connect = lbs_cfg_connect, | |
2009 | .disconnect = lbs_cfg_disconnect, | |
2010 | .add_key = lbs_cfg_add_key, | |
2011 | .del_key = lbs_cfg_del_key, | |
2012 | .set_default_key = lbs_cfg_set_default_key, | |
2013 | .get_station = lbs_cfg_get_station, | |
2014 | .dump_survey = lbs_get_survey, | |
2015 | .change_virtual_intf = lbs_change_intf, | |
2016 | .join_ibss = lbs_join_ibss, | |
2017 | .leave_ibss = lbs_leave_ibss, | |
ff9fc791 HS |
2018 | }; |
2019 | ||
2020 | ||
2021 | /* | |
2022 | * At this time lbs_private *priv doesn't even exist, so we just allocate | |
2023 | * memory and don't initialize the wiphy further. This is postponed until we | |
2024 | * can talk to the firmware and happens at registration time in | |
2025 | * lbs_cfg_wiphy_register(). | |
2026 | */ | |
2027 | struct wireless_dev *lbs_cfg_alloc(struct device *dev) | |
2028 | { | |
2029 | int ret = 0; | |
2030 | struct wireless_dev *wdev; | |
2031 | ||
2032 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2033 | ||
2034 | wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); | |
2035 | if (!wdev) { | |
2036 | dev_err(dev, "cannot allocate wireless device\n"); | |
2037 | return ERR_PTR(-ENOMEM); | |
2038 | } | |
2039 | ||
2040 | wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private)); | |
2041 | if (!wdev->wiphy) { | |
2042 | dev_err(dev, "cannot allocate wiphy\n"); | |
2043 | ret = -ENOMEM; | |
2044 | goto err_wiphy_new; | |
2045 | } | |
2046 | ||
2047 | lbs_deb_leave(LBS_DEB_CFG80211); | |
2048 | return wdev; | |
2049 | ||
2050 | err_wiphy_new: | |
2051 | kfree(wdev); | |
2052 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); | |
2053 | return ERR_PTR(ret); | |
2054 | } | |
2055 | ||
2056 | ||
e86dc1ca KD |
2057 | static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv) |
2058 | { | |
2059 | struct region_code_mapping { | |
2060 | const char *cn; | |
2061 | int code; | |
2062 | }; | |
2063 | ||
2064 | /* Section 5.17.2 */ | |
2065 | static struct region_code_mapping regmap[] = { | |
2066 | {"US ", 0x10}, /* US FCC */ | |
2067 | {"CA ", 0x20}, /* Canada */ | |
2068 | {"EU ", 0x30}, /* ETSI */ | |
2069 | {"ES ", 0x31}, /* Spain */ | |
2070 | {"FR ", 0x32}, /* France */ | |
2071 | {"JP ", 0x40}, /* Japan */ | |
2072 | }; | |
2073 | size_t i; | |
2074 | ||
2075 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2076 | ||
2077 | for (i = 0; i < ARRAY_SIZE(regmap); i++) | |
2078 | if (regmap[i].code == priv->regioncode) { | |
2079 | regulatory_hint(priv->wdev->wiphy, regmap[i].cn); | |
2080 | break; | |
2081 | } | |
2082 | ||
2083 | lbs_deb_leave(LBS_DEB_CFG80211); | |
2084 | } | |
2085 | ||
2086 | ||
ff9fc791 HS |
2087 | /* |
2088 | * This function get's called after lbs_setup_firmware() determined the | |
2089 | * firmware capabities. So we can setup the wiphy according to our | |
2090 | * hardware/firmware. | |
2091 | */ | |
2092 | int lbs_cfg_register(struct lbs_private *priv) | |
2093 | { | |
2094 | struct wireless_dev *wdev = priv->wdev; | |
2095 | int ret; | |
2096 | ||
2097 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2098 | ||
2099 | wdev->wiphy->max_scan_ssids = 1; | |
2100 | wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; | |
2101 | ||
e86dc1ca KD |
2102 | wdev->wiphy->interface_modes = |
2103 | BIT(NL80211_IFTYPE_STATION) | | |
2104 | BIT(NL80211_IFTYPE_ADHOC); | |
2105 | if (lbs_rtap_supported(priv)) | |
2106 | wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); | |
ff9fc791 | 2107 | |
ff9fc791 HS |
2108 | wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &lbs_band_2ghz; |
2109 | ||
2110 | /* | |
2111 | * We could check priv->fwcapinfo && FW_CAPINFO_WPA, but I have | |
2112 | * never seen a firmware without WPA | |
2113 | */ | |
2114 | wdev->wiphy->cipher_suites = cipher_suites; | |
2115 | wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); | |
1047d5ed | 2116 | wdev->wiphy->reg_notifier = lbs_reg_notifier; |
ff9fc791 HS |
2117 | |
2118 | ret = wiphy_register(wdev->wiphy); | |
2119 | if (ret < 0) | |
2120 | lbs_pr_err("cannot register wiphy device\n"); | |
2121 | ||
73714004 DM |
2122 | priv->wiphy_registered = true; |
2123 | ||
ff9fc791 HS |
2124 | ret = register_netdev(priv->dev); |
2125 | if (ret) | |
2126 | lbs_pr_err("cannot register network device\n"); | |
2127 | ||
e86dc1ca KD |
2128 | INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker); |
2129 | ||
2130 | lbs_cfg_set_regulatory_hint(priv); | |
2131 | ||
ff9fc791 HS |
2132 | lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); |
2133 | return ret; | |
2134 | } | |
2135 | ||
1047d5ed KD |
2136 | int lbs_reg_notifier(struct wiphy *wiphy, |
2137 | struct regulatory_request *request) | |
2138 | { | |
cc4b9d39 DW |
2139 | struct lbs_private *priv = wiphy_priv(wiphy); |
2140 | int ret; | |
2141 | ||
1047d5ed KD |
2142 | lbs_deb_enter_args(LBS_DEB_CFG80211, "cfg80211 regulatory domain " |
2143 | "callback for domain %c%c\n", request->alpha2[0], | |
2144 | request->alpha2[1]); | |
2145 | ||
cc4b9d39 | 2146 | ret = lbs_set_11d_domain_info(priv, request, wiphy->bands); |
1047d5ed KD |
2147 | |
2148 | lbs_deb_leave(LBS_DEB_CFG80211); | |
cc4b9d39 | 2149 | return ret; |
1047d5ed | 2150 | } |
ff9fc791 | 2151 | |
e86dc1ca KD |
2152 | void lbs_scan_deinit(struct lbs_private *priv) |
2153 | { | |
2154 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2155 | cancel_delayed_work_sync(&priv->scan_work); | |
2156 | } | |
2157 | ||
2158 | ||
ff9fc791 HS |
2159 | void lbs_cfg_free(struct lbs_private *priv) |
2160 | { | |
2161 | struct wireless_dev *wdev = priv->wdev; | |
2162 | ||
2163 | lbs_deb_enter(LBS_DEB_CFG80211); | |
2164 | ||
2165 | if (!wdev) | |
2166 | return; | |
2167 | ||
73714004 | 2168 | if (priv->wiphy_registered) |
ff9fc791 | 2169 | wiphy_unregister(wdev->wiphy); |
73714004 DM |
2170 | |
2171 | if (wdev->wiphy) | |
ff9fc791 | 2172 | wiphy_free(wdev->wiphy); |
73714004 | 2173 | |
ff9fc791 HS |
2174 | kfree(wdev); |
2175 | } |