[mirror_ubuntu-artful-kernel.git] / drivers / net / wireless / libertas / host.h

/**
  * This file contains definitions of WLAN commands.
  */

#ifndef _LBS_HOST_H_
#define _LBS_HOST_H_

/** PUBLIC DEFINITIONS */
#define DEFAULT_AD_HOC_CHANNEL			6
#define	DEFAULT_AD_HOC_CHANNEL_A		36

#define CMD_OPTION_WAITFORRSP			0x0002

/** Host command IDs */

/* Return command are almost always the same as the host command, but with
 * bit 15 set high.  There are a few exceptions, though...
 */
#define CMD_RET(cmd)			(0x8000 | cmd)

/* Return command convention exceptions: */
#define CMD_RET_802_11_ASSOCIATE		0x8012

/* Command codes */
#define CMD_GET_HW_SPEC				0x0003
#define	CMD_EEPROM_UPDATE			0x0004
#define CMD_802_11_RESET			0x0005
#define	CMD_802_11_SCAN				0x0006
#define CMD_802_11_GET_LOG			0x000b
#define CMD_MAC_MULTICAST_ADR			0x0010
#define CMD_802_11_AUTHENTICATE			0x0011
#define CMD_802_11_EEPROM_ACCESS		0x0059
#define CMD_802_11_ASSOCIATE			0x0050
#define CMD_802_11_SET_WEP			0x0013
#define CMD_802_11_GET_STAT			0x0014
#define CMD_802_3_GET_STAT			0x0015
#define CMD_802_11_SNMP_MIB			0x0016
#define CMD_MAC_REG_MAP				0x0017
#define CMD_BBP_REG_MAP				0x0018
#define CMD_MAC_REG_ACCESS			0x0019
#define CMD_BBP_REG_ACCESS			0x001a
#define CMD_RF_REG_ACCESS			0x001b
#define CMD_802_11_RADIO_CONTROL		0x001c
#define CMD_802_11_RF_CHANNEL			0x001d
#define CMD_802_11_RF_TX_POWER			0x001e
#define CMD_802_11_RSSI				0x001f
#define CMD_802_11_RF_ANTENNA			0x0020
#define CMD_802_11_PS_MODE			0x0021
#define CMD_802_11_DATA_RATE			0x0022
#define CMD_RF_REG_MAP				0x0023
#define CMD_802_11_DEAUTHENTICATE		0x0024
#define CMD_802_11_REASSOCIATE			0x0025
#define CMD_MAC_CONTROL				0x0028
#define CMD_802_11_AD_HOC_START			0x002b
#define CMD_802_11_AD_HOC_JOIN			0x002c
#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS	0x002e
#define CMD_802_11_ENABLE_RSN			0x002f
#define CMD_802_11_SET_AFC			0x003c
#define CMD_802_11_GET_AFC			0x003d
#define CMD_802_11_AD_HOC_STOP			0x0040
#define CMD_802_11_HOST_SLEEP_CFG		0x0043
#define CMD_802_11_WAKEUP_CONFIRM		0x0044
#define CMD_802_11_HOST_SLEEP_ACTIVATE		0x0045
#define CMD_802_11_BEACON_STOP			0x0049
#define CMD_802_11_MAC_ADDRESS			0x004d
#define CMD_802_11_LED_GPIO_CTRL		0x004e
#define CMD_802_11_EEPROM_ACCESS		0x0059
#define CMD_802_11_BAND_CONFIG			0x0058
#define CMD_GSPI_BUS_CONFIG			0x005a
#define CMD_802_11D_DOMAIN_INFO			0x005b
#define CMD_802_11_KEY_MATERIAL			0x005e
#define CMD_802_11_SLEEP_PARAMS			0x0066
#define CMD_802_11_INACTIVITY_TIMEOUT		0x0067
#define CMD_802_11_SLEEP_PERIOD			0x0068
#define CMD_802_11_TPC_CFG			0x0072
#define CMD_802_11_PA_CFG			0x0073
#define CMD_802_11_FW_WAKE_METHOD		0x0074
#define CMD_802_11_SUBSCRIBE_EVENT		0x0075
#define CMD_802_11_RATE_ADAPT_RATESET		0x0076
#define CMD_802_11_TX_RATE_QUERY		0x007f
#define	CMD_GET_TSF				0x0080
#define CMD_BT_ACCESS				0x0087
#define CMD_FWT_ACCESS				0x0095
#define CMD_802_11_MONITOR_MODE			0x0098
#define CMD_MESH_ACCESS				0x009b
#define CMD_MESH_CONFIG_OLD			0x00a3
#define CMD_MESH_CONFIG				0x00ac
#define	CMD_SET_BOOT2_VER			0x00a5
#define CMD_802_11_BEACON_CTRL			0x00b0

/* For the IEEE Power Save */
#define CMD_SUBCMD_ENTER_PS		0x0030
#define CMD_SUBCMD_EXIT_PS		0x0031
#define CMD_SUBCMD_SLEEP_CONFIRMED	0x0034
#define CMD_SUBCMD_FULL_POWERDOWN	0x0035
#define CMD_SUBCMD_FULL_POWERUP		0x0036

#define CMD_ENABLE_RSN			0x0001
#define CMD_DISABLE_RSN			0x0000

#define CMD_ACT_GET			0x0000
#define CMD_ACT_SET			0x0001
#define CMD_ACT_GET_AES			0x0002
#define CMD_ACT_SET_AES			0x0003
#define CMD_ACT_REMOVE_AES		0x0004

/* Define action or option for CMD_802_11_SET_WEP */
#define CMD_ACT_ADD			0x0002
#define CMD_ACT_REMOVE			0x0004
#define CMD_ACT_USE_DEFAULT		0x0008

#define CMD_TYPE_WEP_40_BIT		0x01
#define CMD_TYPE_WEP_104_BIT		0x02

#define CMD_NUM_OF_WEP_KEYS		4

#define CMD_WEP_KEY_INDEX_MASK		0x3fff

/* Define action or option for CMD_802_11_RESET */
#define CMD_ACT_HALT			0x0003

/* Define action or option for CMD_802_11_SCAN */
#define CMD_BSS_TYPE_BSS		0x0001
#define CMD_BSS_TYPE_IBSS		0x0002
#define CMD_BSS_TYPE_ANY		0x0003

/* Define action or option for CMD_802_11_SCAN */
#define CMD_SCAN_TYPE_ACTIVE		0x0000
#define CMD_SCAN_TYPE_PASSIVE		0x0001

#define CMD_SCAN_RADIO_TYPE_BG		0

#define	CMD_SCAN_PROBE_DELAY_TIME	0

/* Define action or option for CMD_MAC_CONTROL */
#define CMD_ACT_MAC_RX_ON			0x0001
#define CMD_ACT_MAC_TX_ON			0x0002
#define CMD_ACT_MAC_LOOPBACK_ON			0x0004
#define CMD_ACT_MAC_WEP_ENABLE			0x0008
#define CMD_ACT_MAC_INT_ENABLE			0x0010
#define CMD_ACT_MAC_MULTICAST_ENABLE		0x0020
#define CMD_ACT_MAC_BROADCAST_ENABLE		0x0040
#define CMD_ACT_MAC_PROMISCUOUS_ENABLE		0x0080
#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE	0x0100
#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE	0x0400

/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
#define CMD_SUBSCRIBE_RSSI_LOW		0x0001
#define CMD_SUBSCRIBE_SNR_LOW		0x0002
#define CMD_SUBSCRIBE_FAILCOUNT		0x0004
#define CMD_SUBSCRIBE_BCNMISS		0x0008
#define CMD_SUBSCRIBE_RSSI_HIGH		0x0010
#define CMD_SUBSCRIBE_SNR_HIGH		0x0020

#define RADIO_PREAMBLE_LONG	0x00
#define RADIO_PREAMBLE_SHORT	0x02
#define RADIO_PREAMBLE_AUTO	0x04

/* Define action or option for CMD_802_11_RF_CHANNEL */
#define CMD_OPT_802_11_RF_CHANNEL_GET	0x00
#define CMD_OPT_802_11_RF_CHANNEL_SET	0x01

/* Define action or option for CMD_802_11_DATA_RATE */
#define CMD_ACT_SET_TX_AUTO		0x0000
#define CMD_ACT_SET_TX_FIX_RATE		0x0001
#define CMD_ACT_GET_TX_RATE		0x0002

#define CMD_ACT_SET_RX			0x0001
#define	CMD_ACT_SET_TX			0x0002
#define CMD_ACT_SET_BOTH		0x0003
#define	CMD_ACT_GET_RX			0x0004
#define CMD_ACT_GET_TX			0x0008
#define	CMD_ACT_GET_BOTH		0x000c

/* Define action or option for CMD_802_11_PS_MODE */
#define CMD_TYPE_CAM			0x0000
#define	CMD_TYPE_MAX_PSP		0x0001
#define CMD_TYPE_FAST_PSP		0x0002

/* Options for CMD_802_11_FW_WAKE_METHOD */
#define CMD_WAKE_METHOD_UNCHANGED	0x0000
#define CMD_WAKE_METHOD_COMMAND_INT	0x0001
#define CMD_WAKE_METHOD_GPIO		0x0002

/* Object IDs for CMD_802_11_SNMP_MIB */
#define SNMP_MIB_OID_BSS_TYPE		0x0000
#define SNMP_MIB_OID_OP_RATE_SET	0x0001
#define SNMP_MIB_OID_BEACON_PERIOD	0x0002  /* Reserved on v9+ */
#define SNMP_MIB_OID_DTIM_PERIOD	0x0003  /* Reserved on v9+ */
#define SNMP_MIB_OID_ASSOC_TIMEOUT	0x0004  /* Reserved on v9+ */
#define SNMP_MIB_OID_RTS_THRESHOLD	0x0005
#define SNMP_MIB_OID_SHORT_RETRY_LIMIT	0x0006
#define SNMP_MIB_OID_LONG_RETRY_LIMIT	0x0007
#define SNMP_MIB_OID_FRAG_THRESHOLD	0x0008
#define SNMP_MIB_OID_11D_ENABLE		0x0009
#define SNMP_MIB_OID_11H_ENABLE		0x000A

/* Define action or option for CMD_BT_ACCESS */
enum cmd_bt_access_opts {
	/* The bt commands start at 5 instead of 1 because the old dft commands
	 * are mapped to 1-4.  These old commands are no longer maintained and
	 * should not be called.
	 */
	CMD_ACT_BT_ACCESS_ADD = 5,
	CMD_ACT_BT_ACCESS_DEL,
	CMD_ACT_BT_ACCESS_LIST,
	CMD_ACT_BT_ACCESS_RESET,
	CMD_ACT_BT_ACCESS_SET_INVERT,
	CMD_ACT_BT_ACCESS_GET_INVERT
};

/* Define action or option for CMD_FWT_ACCESS */
enum cmd_fwt_access_opts {
	CMD_ACT_FWT_ACCESS_ADD = 1,
	CMD_ACT_FWT_ACCESS_DEL,
	CMD_ACT_FWT_ACCESS_LOOKUP,
	CMD_ACT_FWT_ACCESS_LIST,
	CMD_ACT_FWT_ACCESS_LIST_ROUTE,
	CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
	CMD_ACT_FWT_ACCESS_RESET,
	CMD_ACT_FWT_ACCESS_CLEANUP,
	CMD_ACT_FWT_ACCESS_TIME,
};

/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
enum cmd_wol_cfg_opts {
	CMD_ACT_ACTION_NONE = 0,
	CMD_ACT_SET_WOL_RULE,
	CMD_ACT_GET_WOL_RULE,
	CMD_ACT_RESET_WOL_RULE,
};

/* Define action or option for CMD_MESH_ACCESS */
enum cmd_mesh_access_opts {
	CMD_ACT_MESH_GET_TTL = 1,
	CMD_ACT_MESH_SET_TTL,
	CMD_ACT_MESH_GET_STATS,
	CMD_ACT_MESH_GET_ANYCAST,
	CMD_ACT_MESH_SET_ANYCAST,
	CMD_ACT_MESH_SET_LINK_COSTS,
	CMD_ACT_MESH_GET_LINK_COSTS,
	CMD_ACT_MESH_SET_BCAST_RATE,
	CMD_ACT_MESH_GET_BCAST_RATE,
	CMD_ACT_MESH_SET_RREQ_DELAY,
	CMD_ACT_MESH_GET_RREQ_DELAY,
	CMD_ACT_MESH_SET_ROUTE_EXP,
	CMD_ACT_MESH_GET_ROUTE_EXP,
	CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
	CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
	CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
};

/* Define actions and types for CMD_MESH_CONFIG */
enum cmd_mesh_config_actions {
	CMD_ACT_MESH_CONFIG_STOP = 0,
	CMD_ACT_MESH_CONFIG_START,
	CMD_ACT_MESH_CONFIG_SET,
	CMD_ACT_MESH_CONFIG_GET,
};

enum cmd_mesh_config_types {
	CMD_TYPE_MESH_SET_BOOTFLAG = 1,
	CMD_TYPE_MESH_SET_BOOTTIME,
	CMD_TYPE_MESH_SET_DEF_CHANNEL,
	CMD_TYPE_MESH_SET_MESH_IE,
	CMD_TYPE_MESH_GET_DEFAULTS,
	CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
};

/** Card Event definition */
#define MACREG_INT_CODE_TX_PPA_FREE		0
#define MACREG_INT_CODE_TX_DMA_DONE		1
#define MACREG_INT_CODE_LINK_LOST_W_SCAN	2
#define MACREG_INT_CODE_LINK_LOST_NO_SCAN	3
#define MACREG_INT_CODE_LINK_SENSED		4
#define MACREG_INT_CODE_CMD_FINISHED		5
#define MACREG_INT_CODE_MIB_CHANGED		6
#define MACREG_INT_CODE_INIT_DONE		7
#define MACREG_INT_CODE_DEAUTHENTICATED		8
#define MACREG_INT_CODE_DISASSOCIATED		9
#define MACREG_INT_CODE_PS_AWAKE		10
#define MACREG_INT_CODE_PS_SLEEP		11
#define MACREG_INT_CODE_MIC_ERR_MULTICAST	13
#define MACREG_INT_CODE_MIC_ERR_UNICAST		14
#define MACREG_INT_CODE_WM_AWAKE		15
#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE	16
#define MACREG_INT_CODE_ADHOC_BCN_LOST		17
#define MACREG_INT_CODE_HOST_AWAKE		18
#define MACREG_INT_CODE_STOP_TX			19
#define MACREG_INT_CODE_START_TX		20
#define MACREG_INT_CODE_CHANNEL_SWITCH		21
#define MACREG_INT_CODE_MEASUREMENT_RDY		22
#define MACREG_INT_CODE_WMM_CHANGE		23
#define MACREG_INT_CODE_BG_SCAN_REPORT		24
#define MACREG_INT_CODE_RSSI_LOW		25
#define MACREG_INT_CODE_SNR_LOW			26
#define MACREG_INT_CODE_MAX_FAIL		27
#define MACREG_INT_CODE_RSSI_HIGH		28
#define MACREG_INT_CODE_SNR_HIGH		29
#define MACREG_INT_CODE_MESH_AUTO_STARTED	35
#define MACREG_INT_CODE_FIRMWARE_READY		48

#endif
Commit	Line	Data
876c9d3a MT	1	/**
	2	* This file contains definitions of WLAN commands.
	3	*/
	4
10078321 HS	5	#ifndef _LBS_HOST_H_
10078321 HS	6	#define _LBS_HOST_H_
876c9d3a MT	7
876c9d3a MT	8	/** PUBLIC DEFINITIONS */
387a1f04 DW	9	#define DEFAULT_AD_HOC_CHANNEL 6
387a1f04 DW	10	#define DEFAULT_AD_HOC_CHANNEL_A 36
876c9d3a	11
387a1f04	12	#define CMD_OPTION_WAITFORRSP 0x0002
876c9d3a	13
6b63cd0f HS	14	/** Host command IDs */
	15
	16	/* Return command are almost always the same as the host command, but with
	17	* bit 15 set high. There are a few exceptions, though...
	18	*/
	19	#define CMD_RET(cmd) (0x8000 \| cmd)
	20
	21	/* Return command convention exceptions: */
387a1f04	22	#define CMD_RET_802_11_ASSOCIATE 0x8012
6b63cd0f HS	23
6b63cd0f HS	24	/* Command codes */
387a1f04 DW	25	#define CMD_GET_HW_SPEC 0x0003
	26	#define CMD_EEPROM_UPDATE 0x0004
	27	#define CMD_802_11_RESET 0x0005
	28	#define CMD_802_11_SCAN 0x0006
	29	#define CMD_802_11_GET_LOG 0x000b
	30	#define CMD_MAC_MULTICAST_ADR 0x0010
	31	#define CMD_802_11_AUTHENTICATE 0x0011
	32	#define CMD_802_11_EEPROM_ACCESS 0x0059
	33	#define CMD_802_11_ASSOCIATE 0x0050
	34	#define CMD_802_11_SET_WEP 0x0013
	35	#define CMD_802_11_GET_STAT 0x0014
	36	#define CMD_802_3_GET_STAT 0x0015
	37	#define CMD_802_11_SNMP_MIB 0x0016
	38	#define CMD_MAC_REG_MAP 0x0017
	39	#define CMD_BBP_REG_MAP 0x0018
	40	#define CMD_MAC_REG_ACCESS 0x0019
	41	#define CMD_BBP_REG_ACCESS 0x001a
	42	#define CMD_RF_REG_ACCESS 0x001b
	43	#define CMD_802_11_RADIO_CONTROL 0x001c
	44	#define CMD_802_11_RF_CHANNEL 0x001d
	45	#define CMD_802_11_RF_TX_POWER 0x001e
	46	#define CMD_802_11_RSSI 0x001f
	47	#define CMD_802_11_RF_ANTENNA 0x0020
	48	#define CMD_802_11_PS_MODE 0x0021
	49	#define CMD_802_11_DATA_RATE 0x0022
	50	#define CMD_RF_REG_MAP 0x0023
	51	#define CMD_802_11_DEAUTHENTICATE 0x0024
	52	#define CMD_802_11_REASSOCIATE 0x0025
387a1f04 DW	53	#define CMD_MAC_CONTROL 0x0028
	54	#define CMD_802_11_AD_HOC_START 0x002b
	55	#define CMD_802_11_AD_HOC_JOIN 0x002c
	56	#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
	57	#define CMD_802_11_ENABLE_RSN 0x002f
387a1f04 DW	58	#define CMD_802_11_SET_AFC 0x003c
	59	#define CMD_802_11_GET_AFC 0x003d
	60	#define CMD_802_11_AD_HOC_STOP 0x0040
6ce4fd2a	61	#define CMD_802_11_HOST_SLEEP_CFG 0x0043
b47ef243	62	#define CMD_802_11_WAKEUP_CONFIRM 0x0044
6ce4fd2a	63	#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045
387a1f04 DW	64	#define CMD_802_11_BEACON_STOP 0x0049
	65	#define CMD_802_11_MAC_ADDRESS 0x004d
	66	#define CMD_802_11_LED_GPIO_CTRL 0x004e
	67	#define CMD_802_11_EEPROM_ACCESS 0x0059
	68	#define CMD_802_11_BAND_CONFIG 0x0058
b4836599	69	#define CMD_GSPI_BUS_CONFIG 0x005a
387a1f04 DW	70	#define CMD_802_11D_DOMAIN_INFO 0x005b
	71	#define CMD_802_11_KEY_MATERIAL 0x005e
	72	#define CMD_802_11_SLEEP_PARAMS 0x0066
	73	#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
c6ad3738	74	#define CMD_802_11_SLEEP_PERIOD 0x0068
387a1f04	75	#define CMD_802_11_TPC_CFG 0x0072
0112c9e9	76	#define CMD_802_11_PA_CFG 0x0073
c6ad3738	77	#define CMD_802_11_FW_WAKE_METHOD 0x0074
387a1f04 DW	78	#define CMD_802_11_SUBSCRIBE_EVENT 0x0075
	79	#define CMD_802_11_RATE_ADAPT_RATESET 0x0076
	80	#define CMD_802_11_TX_RATE_QUERY 0x007f
	81	#define CMD_GET_TSF 0x0080
	82	#define CMD_BT_ACCESS 0x0087
	83	#define CMD_FWT_ACCESS 0x0095
	84	#define CMD_802_11_MONITOR_MODE 0x0098
	85	#define CMD_MESH_ACCESS 0x009b
684d6b36 BZ	86	#define CMD_MESH_CONFIG_OLD 0x00a3
684d6b36 BZ	87	#define CMD_MESH_CONFIG 0x00ac
387a1f04 DW	88	#define CMD_SET_BOOT2_VER 0x00a5
387a1f04 DW	89	#define CMD_802_11_BEACON_CTRL 0x00b0
96287ac4	90
876c9d3a	91	/* For the IEEE Power Save */
387a1f04 DW	92	#define CMD_SUBCMD_ENTER_PS 0x0030
	93	#define CMD_SUBCMD_EXIT_PS 0x0031
	94	#define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034
	95	#define CMD_SUBCMD_FULL_POWERDOWN 0x0035
	96	#define CMD_SUBCMD_FULL_POWERUP 0x0036
876c9d3a	97
387a1f04 DW	98	#define CMD_ENABLE_RSN 0x0001
387a1f04 DW	99	#define CMD_DISABLE_RSN 0x0000
876c9d3a	100
387a1f04 DW	101	#define CMD_ACT_GET 0x0000
	102	#define CMD_ACT_SET 0x0001
	103	#define CMD_ACT_GET_AES 0x0002
	104	#define CMD_ACT_SET_AES 0x0003
	105	#define CMD_ACT_REMOVE_AES 0x0004
876c9d3a	106
0aef64d7	107	/* Define action or option for CMD_802_11_SET_WEP */
387a1f04 DW	108	#define CMD_ACT_ADD 0x0002
	109	#define CMD_ACT_REMOVE 0x0004
	110	#define CMD_ACT_USE_DEFAULT 0x0008
876c9d3a	111
387a1f04 DW	112	#define CMD_TYPE_WEP_40_BIT 0x01
387a1f04 DW	113	#define CMD_TYPE_WEP_104_BIT 0x02
876c9d3a	114
387a1f04	115	#define CMD_NUM_OF_WEP_KEYS 4
876c9d3a	116
387a1f04	117	#define CMD_WEP_KEY_INDEX_MASK 0x3fff
876c9d3a	118
0aef64d7	119	/* Define action or option for CMD_802_11_RESET */
387a1f04	120	#define CMD_ACT_HALT 0x0003
876c9d3a	121
0aef64d7	122	/* Define action or option for CMD_802_11_SCAN */
387a1f04 DW	123	#define CMD_BSS_TYPE_BSS 0x0001
	124	#define CMD_BSS_TYPE_IBSS 0x0002
	125	#define CMD_BSS_TYPE_ANY 0x0003
876c9d3a	126
0aef64d7	127	/* Define action or option for CMD_802_11_SCAN */
387a1f04 DW	128	#define CMD_SCAN_TYPE_ACTIVE 0x0000
387a1f04 DW	129	#define CMD_SCAN_TYPE_PASSIVE 0x0001
876c9d3a	130
0aef64d7	131	#define CMD_SCAN_RADIO_TYPE_BG 0
876c9d3a	132
387a1f04	133	#define CMD_SCAN_PROBE_DELAY_TIME 0
876c9d3a	134
0aef64d7	135	/* Define action or option for CMD_MAC_CONTROL */
387a1f04 DW	136	#define CMD_ACT_MAC_RX_ON 0x0001
	137	#define CMD_ACT_MAC_TX_ON 0x0002
	138	#define CMD_ACT_MAC_LOOPBACK_ON 0x0004
	139	#define CMD_ACT_MAC_WEP_ENABLE 0x0008
	140	#define CMD_ACT_MAC_INT_ENABLE 0x0010
	141	#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
	142	#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
	143	#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
	144	#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
	145	#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
876c9d3a	146
3a188649	147	/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
387a1f04 DW	148	#define CMD_SUBSCRIBE_RSSI_LOW 0x0001
	149	#define CMD_SUBSCRIBE_SNR_LOW 0x0002
	150	#define CMD_SUBSCRIBE_FAILCOUNT 0x0004
	151	#define CMD_SUBSCRIBE_BCNMISS 0x0008
	152	#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
	153	#define CMD_SUBSCRIBE_SNR_HIGH 0x0020
3a188649	154
d5db2dfa DW	155	#define RADIO_PREAMBLE_LONG 0x00
	156	#define RADIO_PREAMBLE_SHORT 0x02
	157	#define RADIO_PREAMBLE_AUTO 0x04
876c9d3a MT	158
876c9d3a MT	159	/* Define action or option for CMD_802_11_RF_CHANNEL */
387a1f04 DW	160	#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
387a1f04 DW	161	#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
0aef64d7	162
0aef64d7	163	/* Define action or option for CMD_802_11_DATA_RATE */
387a1f04 DW	164	#define CMD_ACT_SET_TX_AUTO 0x0000
	165	#define CMD_ACT_SET_TX_FIX_RATE 0x0001
	166	#define CMD_ACT_GET_TX_RATE 0x0002
0aef64d7	167
387a1f04 DW	168	#define CMD_ACT_SET_RX 0x0001
	169	#define CMD_ACT_SET_TX 0x0002
	170	#define CMD_ACT_SET_BOTH 0x0003
	171	#define CMD_ACT_GET_RX 0x0004
	172	#define CMD_ACT_GET_TX 0x0008
	173	#define CMD_ACT_GET_BOTH 0x000c
0aef64d7 DW	174
0aef64d7 DW	175	/* Define action or option for CMD_802_11_PS_MODE */
387a1f04 DW	176	#define CMD_TYPE_CAM 0x0000
	177	#define CMD_TYPE_MAX_PSP 0x0001
	178	#define CMD_TYPE_FAST_PSP 0x0002
0aef64d7	179
b2c57eee DW	180	/* Options for CMD_802_11_FW_WAKE_METHOD */
	181	#define CMD_WAKE_METHOD_UNCHANGED 0x0000
	182	#define CMD_WAKE_METHOD_COMMAND_INT 0x0001
	183	#define CMD_WAKE_METHOD_GPIO 0x0002
	184
39fcf7a3 DW	185	/* Object IDs for CMD_802_11_SNMP_MIB */
	186	#define SNMP_MIB_OID_BSS_TYPE 0x0000
	187	#define SNMP_MIB_OID_OP_RATE_SET 0x0001
	188	#define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */
	189	#define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */
	190	#define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */
	191	#define SNMP_MIB_OID_RTS_THRESHOLD 0x0005
	192	#define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006
	193	#define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007
	194	#define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008
	195	#define SNMP_MIB_OID_11D_ENABLE 0x0009
	196	#define SNMP_MIB_OID_11H_ENABLE 0x000A
	197
0aef64d7	198	/* Define action or option for CMD_BT_ACCESS */
ffcae953	199	enum cmd_bt_access_opts {
876c9d3a MT	200	/* The bt commands start at 5 instead of 1 because the old dft commands
	201	* are mapped to 1-4. These old commands are no longer maintained and
	202	* should not be called.
	203	*/
0aef64d7 DW	204	CMD_ACT_BT_ACCESS_ADD = 5,
	205	CMD_ACT_BT_ACCESS_DEL,
	206	CMD_ACT_BT_ACCESS_LIST,
	207	CMD_ACT_BT_ACCESS_RESET,
	208	CMD_ACT_BT_ACCESS_SET_INVERT,
	209	CMD_ACT_BT_ACCESS_GET_INVERT
876c9d3a MT	210	};
876c9d3a MT	211
0aef64d7	212	/* Define action or option for CMD_FWT_ACCESS */
ffcae953	213	enum cmd_fwt_access_opts {
0aef64d7 DW	214	CMD_ACT_FWT_ACCESS_ADD = 1,
	215	CMD_ACT_FWT_ACCESS_DEL,
	216	CMD_ACT_FWT_ACCESS_LOOKUP,
	217	CMD_ACT_FWT_ACCESS_LIST,
79a9a37c DW	218	CMD_ACT_FWT_ACCESS_LIST_ROUTE,
79a9a37c DW	219	CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
0aef64d7 DW	220	CMD_ACT_FWT_ACCESS_RESET,
	221	CMD_ACT_FWT_ACCESS_CLEANUP,
	222	CMD_ACT_FWT_ACCESS_TIME,
876c9d3a MT	223	};
876c9d3a MT	224
582c1b53 AN	225	/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
	226	enum cmd_wol_cfg_opts {
	227	CMD_ACT_ACTION_NONE = 0,
	228	CMD_ACT_SET_WOL_RULE,
	229	CMD_ACT_GET_WOL_RULE,
	230	CMD_ACT_RESET_WOL_RULE,
	231	};
	232
0aef64d7	233	/* Define action or option for CMD_MESH_ACCESS */
ffcae953	234	enum cmd_mesh_access_opts {
0aef64d7 DW	235	CMD_ACT_MESH_GET_TTL = 1,
	236	CMD_ACT_MESH_SET_TTL,
	237	CMD_ACT_MESH_GET_STATS,
	238	CMD_ACT_MESH_GET_ANYCAST,
	239	CMD_ACT_MESH_SET_ANYCAST,
276c015e DW	240	CMD_ACT_MESH_SET_LINK_COSTS,
	241	CMD_ACT_MESH_GET_LINK_COSTS,
	242	CMD_ACT_MESH_SET_BCAST_RATE,
	243	CMD_ACT_MESH_GET_BCAST_RATE,
	244	CMD_ACT_MESH_SET_RREQ_DELAY,
	245	CMD_ACT_MESH_GET_RREQ_DELAY,
	246	CMD_ACT_MESH_SET_ROUTE_EXP,
	247	CMD_ACT_MESH_GET_ROUTE_EXP,
a9f38d02 LCC	248	CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
a9f38d02 LCC	249	CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
6fb53252	250	CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
876c9d3a MT	251	};
876c9d3a MT	252
edaea5ce JC	253	/* Define actions and types for CMD_MESH_CONFIG */
	254	enum cmd_mesh_config_actions {
	255	CMD_ACT_MESH_CONFIG_STOP = 0,
	256	CMD_ACT_MESH_CONFIG_START,
	257	CMD_ACT_MESH_CONFIG_SET,
	258	CMD_ACT_MESH_CONFIG_GET,
	259	};
	260
	261	enum cmd_mesh_config_types {
	262	CMD_TYPE_MESH_SET_BOOTFLAG = 1,
	263	CMD_TYPE_MESH_SET_BOOTTIME,
	264	CMD_TYPE_MESH_SET_DEF_CHANNEL,
	265	CMD_TYPE_MESH_SET_MESH_IE,
	266	CMD_TYPE_MESH_GET_DEFAULTS,
	267	CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
	268	};
	269
876c9d3a	270	/** Card Event definition */
387a1f04 DW	271	#define MACREG_INT_CODE_TX_PPA_FREE 0
	272	#define MACREG_INT_CODE_TX_DMA_DONE 1
	273	#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
	274	#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
	275	#define MACREG_INT_CODE_LINK_SENSED 4
	276	#define MACREG_INT_CODE_CMD_FINISHED 5
	277	#define MACREG_INT_CODE_MIB_CHANGED 6
	278	#define MACREG_INT_CODE_INIT_DONE 7
	279	#define MACREG_INT_CODE_DEAUTHENTICATED 8
	280	#define MACREG_INT_CODE_DISASSOCIATED 9
	281	#define MACREG_INT_CODE_PS_AWAKE 10
	282	#define MACREG_INT_CODE_PS_SLEEP 11
	283	#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
	284	#define MACREG_INT_CODE_MIC_ERR_UNICAST 14
	285	#define MACREG_INT_CODE_WM_AWAKE 15
	286	#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
	287	#define MACREG_INT_CODE_ADHOC_BCN_LOST 17
	288	#define MACREG_INT_CODE_HOST_AWAKE 18
	289	#define MACREG_INT_CODE_STOP_TX 19
	290	#define MACREG_INT_CODE_START_TX 20
	291	#define MACREG_INT_CODE_CHANNEL_SWITCH 21
	292	#define MACREG_INT_CODE_MEASUREMENT_RDY 22
	293	#define MACREG_INT_CODE_WMM_CHANGE 23
	294	#define MACREG_INT_CODE_BG_SCAN_REPORT 24
	295	#define MACREG_INT_CODE_RSSI_LOW 25
	296	#define MACREG_INT_CODE_SNR_LOW 26
	297	#define MACREG_INT_CODE_MAX_FAIL 27
	298	#define MACREG_INT_CODE_RSSI_HIGH 28
	299	#define MACREG_INT_CODE_SNR_HIGH 29
	300	#define MACREG_INT_CODE_MESH_AUTO_STARTED 35
	301	#define MACREG_INT_CODE_FIRMWARE_READY 48
876c9d3a	302
10078321	303	#endif