]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c) |
2 | * | |
3 | * A driver for Hermes or Prism 2 chipset based PCMCIA wireless | |
4 | * adaptors, with Lucent/Agere, Intersil or Symbol firmware. | |
5 | * | |
6 | * Current maintainers (as of 29 September 2003) are: | |
7 | * Pavel Roskin <proski AT gnu.org> | |
8 | * and David Gibson <hermes AT gibson.dropbear.id.au> | |
9 | * | |
10 | * (C) Copyright David Gibson, IBM Corporation 2001-2003. | |
11 | * Copyright (C) 2000 David Gibson, Linuxcare Australia. | |
12 | * With some help from : | |
13 | * Copyright (C) 2001 Jean Tourrilhes, HP Labs | |
14 | * Copyright (C) 2001 Benjamin Herrenschmidt | |
15 | * | |
16 | * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 | |
17 | * | |
18 | * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy | |
19 | * AT fasta.fh-dortmund.de> | |
20 | * http://www.stud.fh-dortmund.de/~andy/wvlan/ | |
21 | * | |
22 | * The contents of this file are subject to the Mozilla Public License | |
23 | * Version 1.1 (the "License"); you may not use this file except in | |
24 | * compliance with the License. You may obtain a copy of the License | |
25 | * at http://www.mozilla.org/MPL/ | |
26 | * | |
27 | * Software distributed under the License is distributed on an "AS IS" | |
28 | * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See | |
29 | * the License for the specific language governing rights and | |
30 | * limitations under the License. | |
31 | * | |
32 | * The initial developer of the original code is David A. Hinds | |
33 | * <dahinds AT users.sourceforge.net>. Portions created by David | |
34 | * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights | |
35 | * Reserved. | |
36 | * | |
37 | * Alternatively, the contents of this file may be used under the | |
38 | * terms of the GNU General Public License version 2 (the "GPL"), in | |
39 | * which case the provisions of the GPL are applicable instead of the | |
40 | * above. If you wish to allow the use of your version of this file | |
41 | * only under the terms of the GPL and not to allow others to use your | |
42 | * version of this file under the MPL, indicate your decision by | |
43 | * deleting the provisions above and replace them with the notice and | |
44 | * other provisions required by the GPL. If you do not delete the | |
45 | * provisions above, a recipient may use your version of this file | |
46 | * under either the MPL or the GPL. */ | |
47 | ||
48 | /* | |
1da177e4 | 49 | * TODO |
1da177e4 LT |
50 | * o Handle de-encapsulation within network layer, provide 802.11 |
51 | * headers (patch from Thomas 'Dent' Mirlacher) | |
1da177e4 LT |
52 | * o Fix possible races in SPY handling. |
53 | * o Disconnect wireless extensions from fundamental configuration. | |
54 | * o (maybe) Software WEP support (patch from Stano Meduna). | |
55 | * o (maybe) Use multiple Tx buffers - driver handling queue | |
56 | * rather than firmware. | |
57 | */ | |
58 | ||
59 | /* Locking and synchronization: | |
60 | * | |
61 | * The basic principle is that everything is serialized through a | |
62 | * single spinlock, priv->lock. The lock is used in user, bh and irq | |
63 | * context, so when taken outside hardirq context it should always be | |
64 | * taken with interrupts disabled. The lock protects both the | |
65 | * hardware and the struct orinoco_private. | |
66 | * | |
67 | * Another flag, priv->hw_unavailable indicates that the hardware is | |
68 | * unavailable for an extended period of time (e.g. suspended, or in | |
69 | * the middle of a hard reset). This flag is protected by the | |
70 | * spinlock. All code which touches the hardware should check the | |
71 | * flag after taking the lock, and if it is set, give up on whatever | |
72 | * they are doing and drop the lock again. The orinoco_lock() | |
73 | * function handles this (it unlocks and returns -EBUSY if | |
74 | * hw_unavailable is non-zero). | |
75 | */ | |
76 | ||
77 | #define DRIVER_NAME "orinoco" | |
78 | ||
1da177e4 LT |
79 | #include <linux/module.h> |
80 | #include <linux/kernel.h> | |
81 | #include <linux/init.h> | |
1da177e4 | 82 | #include <linux/netdevice.h> |
1da177e4 | 83 | #include <linux/etherdevice.h> |
1fab2e8b | 84 | #include <linux/ethtool.h> |
9c974fb1 | 85 | #include <linux/if_arp.h> |
1da177e4 | 86 | #include <linux/wireless.h> |
620554e4 | 87 | #include <net/iw_handler.h> |
5d558b7f | 88 | #include <net/ieee80211.h> |
1da177e4 | 89 | |
1da177e4 LT |
90 | #include "hermes_rid.h" |
91 | #include "orinoco.h" | |
1da177e4 LT |
92 | |
93 | /********************************************************************/ | |
94 | /* Module information */ | |
95 | /********************************************************************/ | |
96 | ||
97 | MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>"); | |
98 | MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards"); | |
99 | MODULE_LICENSE("Dual MPL/GPL"); | |
100 | ||
101 | /* Level of debugging. Used in the macros in orinoco.h */ | |
102 | #ifdef ORINOCO_DEBUG | |
103 | int orinoco_debug = ORINOCO_DEBUG; | |
104 | module_param(orinoco_debug, int, 0644); | |
105 | MODULE_PARM_DESC(orinoco_debug, "Debug level"); | |
106 | EXPORT_SYMBOL(orinoco_debug); | |
107 | #endif | |
108 | ||
109 | static int suppress_linkstatus; /* = 0 */ | |
110 | module_param(suppress_linkstatus, bool, 0644); | |
111 | MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); | |
7bb7c3a3 DG |
112 | static int ignore_disconnect; /* = 0 */ |
113 | module_param(ignore_disconnect, int, 0644); | |
114 | MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer"); | |
1da177e4 | 115 | |
98c4cae1 CH |
116 | static int force_monitor; /* = 0 */ |
117 | module_param(force_monitor, int, 0644); | |
118 | MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); | |
119 | ||
1da177e4 LT |
120 | /********************************************************************/ |
121 | /* Compile time configuration and compatibility stuff */ | |
122 | /********************************************************************/ | |
123 | ||
124 | /* We do this this way to avoid ifdefs in the actual code */ | |
125 | #ifdef WIRELESS_SPY | |
343c686c | 126 | #define SPY_NUMBER(priv) (priv->spy_data.spy_number) |
1da177e4 LT |
127 | #else |
128 | #define SPY_NUMBER(priv) 0 | |
129 | #endif /* WIRELESS_SPY */ | |
130 | ||
131 | /********************************************************************/ | |
132 | /* Internal constants */ | |
133 | /********************************************************************/ | |
134 | ||
95dd91fb CH |
135 | /* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ |
136 | static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; | |
137 | #define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) | |
138 | ||
1da177e4 | 139 | #define ORINOCO_MIN_MTU 256 |
b453872c | 140 | #define ORINOCO_MAX_MTU (IEEE80211_DATA_LEN - ENCAPS_OVERHEAD) |
1da177e4 LT |
141 | |
142 | #define SYMBOL_MAX_VER_LEN (14) | |
143 | #define USER_BAP 0 | |
144 | #define IRQ_BAP 1 | |
145 | #define MAX_IRQLOOPS_PER_IRQ 10 | |
146 | #define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of | |
147 | * how many events the | |
148 | * device could | |
149 | * legitimately generate */ | |
150 | #define SMALL_KEY_SIZE 5 | |
151 | #define LARGE_KEY_SIZE 13 | |
152 | #define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */ | |
153 | ||
154 | #define DUMMY_FID 0xFFFF | |
155 | ||
156 | /*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ | |
157 | HERMES_MAX_MULTICAST : 0)*/ | |
158 | #define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) | |
159 | ||
160 | #define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ | |
161 | | HERMES_EV_TX | HERMES_EV_TXEXC \ | |
162 | | HERMES_EV_WTERR | HERMES_EV_INFO \ | |
163 | | HERMES_EV_INFDROP ) | |
164 | ||
620554e4 CH |
165 | #define MAX_RID_LEN 1024 |
166 | ||
167 | static const struct iw_handler_def orinoco_handler_def; | |
1fab2e8b | 168 | static struct ethtool_ops orinoco_ethtool_ops; |
620554e4 | 169 | |
1da177e4 LT |
170 | /********************************************************************/ |
171 | /* Data tables */ | |
172 | /********************************************************************/ | |
173 | ||
174 | /* The frequency of each channel in MHz */ | |
175 | static const long channel_frequency[] = { | |
176 | 2412, 2417, 2422, 2427, 2432, 2437, 2442, | |
177 | 2447, 2452, 2457, 2462, 2467, 2472, 2484 | |
178 | }; | |
179 | #define NUM_CHANNELS ARRAY_SIZE(channel_frequency) | |
180 | ||
181 | /* This tables gives the actual meanings of the bitrate IDs returned | |
182 | * by the firmware. */ | |
183 | static struct { | |
184 | int bitrate; /* in 100s of kilobits */ | |
185 | int automatic; | |
186 | u16 agere_txratectrl; | |
187 | u16 intersil_txratectrl; | |
188 | } bitrate_table[] = { | |
189 | {110, 1, 3, 15}, /* Entry 0 is the default */ | |
190 | {10, 0, 1, 1}, | |
191 | {10, 1, 1, 1}, | |
192 | {20, 0, 2, 2}, | |
193 | {20, 1, 6, 3}, | |
194 | {55, 0, 4, 4}, | |
195 | {55, 1, 7, 7}, | |
196 | {110, 0, 5, 8}, | |
197 | }; | |
198 | #define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) | |
199 | ||
200 | /********************************************************************/ | |
201 | /* Data types */ | |
202 | /********************************************************************/ | |
203 | ||
30c2d3b4 PR |
204 | /* Beginning of the Tx descriptor, used in TxExc handling */ |
205 | struct hermes_txexc_data { | |
206 | struct hermes_tx_descriptor desc; | |
d133ae4c PR |
207 | __le16 frame_ctl; |
208 | __le16 duration_id; | |
95dd91fb | 209 | u8 addr1[ETH_ALEN]; |
1da177e4 LT |
210 | } __attribute__ ((packed)); |
211 | ||
8f2abf44 | 212 | /* Rx frame header except compatibility 802.3 header */ |
1da177e4 | 213 | struct hermes_rx_descriptor { |
8f2abf44 | 214 | /* Control */ |
d133ae4c PR |
215 | __le16 status; |
216 | __le32 time; | |
1da177e4 LT |
217 | u8 silence; |
218 | u8 signal; | |
219 | u8 rate; | |
220 | u8 rxflow; | |
d133ae4c | 221 | __le32 reserved; |
8f2abf44 CH |
222 | |
223 | /* 802.11 header */ | |
d133ae4c PR |
224 | __le16 frame_ctl; |
225 | __le16 duration_id; | |
8f2abf44 CH |
226 | u8 addr1[ETH_ALEN]; |
227 | u8 addr2[ETH_ALEN]; | |
228 | u8 addr3[ETH_ALEN]; | |
d133ae4c | 229 | __le16 seq_ctl; |
8f2abf44 CH |
230 | u8 addr4[ETH_ALEN]; |
231 | ||
232 | /* Data length */ | |
d133ae4c | 233 | __le16 data_len; |
1da177e4 LT |
234 | } __attribute__ ((packed)); |
235 | ||
236 | /********************************************************************/ | |
237 | /* Function prototypes */ | |
238 | /********************************************************************/ | |
239 | ||
1da177e4 LT |
240 | static int __orinoco_program_rids(struct net_device *dev); |
241 | static void __orinoco_set_multicast_list(struct net_device *dev); | |
1da177e4 LT |
242 | |
243 | /********************************************************************/ | |
244 | /* Internal helper functions */ | |
245 | /********************************************************************/ | |
246 | ||
247 | static inline void set_port_type(struct orinoco_private *priv) | |
248 | { | |
249 | switch (priv->iw_mode) { | |
250 | case IW_MODE_INFRA: | |
251 | priv->port_type = 1; | |
252 | priv->createibss = 0; | |
253 | break; | |
254 | case IW_MODE_ADHOC: | |
255 | if (priv->prefer_port3) { | |
256 | priv->port_type = 3; | |
257 | priv->createibss = 0; | |
258 | } else { | |
259 | priv->port_type = priv->ibss_port; | |
260 | priv->createibss = 1; | |
261 | } | |
262 | break; | |
98c4cae1 CH |
263 | case IW_MODE_MONITOR: |
264 | priv->port_type = 3; | |
265 | priv->createibss = 0; | |
266 | break; | |
1da177e4 LT |
267 | default: |
268 | printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", | |
269 | priv->ndev->name); | |
270 | } | |
271 | } | |
272 | ||
273 | /********************************************************************/ | |
274 | /* Device methods */ | |
275 | /********************************************************************/ | |
276 | ||
277 | static int orinoco_open(struct net_device *dev) | |
278 | { | |
279 | struct orinoco_private *priv = netdev_priv(dev); | |
280 | unsigned long flags; | |
281 | int err; | |
282 | ||
283 | if (orinoco_lock(priv, &flags) != 0) | |
284 | return -EBUSY; | |
285 | ||
286 | err = __orinoco_up(dev); | |
287 | ||
288 | if (! err) | |
289 | priv->open = 1; | |
290 | ||
291 | orinoco_unlock(priv, &flags); | |
292 | ||
293 | return err; | |
294 | } | |
295 | ||
ad8f451b | 296 | static int orinoco_stop(struct net_device *dev) |
1da177e4 LT |
297 | { |
298 | struct orinoco_private *priv = netdev_priv(dev); | |
299 | int err = 0; | |
300 | ||
301 | /* We mustn't use orinoco_lock() here, because we need to be | |
302 | able to close the interface even if hw_unavailable is set | |
303 | (e.g. as we're released after a PC Card removal) */ | |
304 | spin_lock_irq(&priv->lock); | |
305 | ||
306 | priv->open = 0; | |
307 | ||
308 | err = __orinoco_down(dev); | |
309 | ||
310 | spin_unlock_irq(&priv->lock); | |
311 | ||
312 | return err; | |
313 | } | |
314 | ||
315 | static struct net_device_stats *orinoco_get_stats(struct net_device *dev) | |
316 | { | |
317 | struct orinoco_private *priv = netdev_priv(dev); | |
318 | ||
319 | return &priv->stats; | |
320 | } | |
321 | ||
322 | static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) | |
323 | { | |
324 | struct orinoco_private *priv = netdev_priv(dev); | |
325 | hermes_t *hw = &priv->hw; | |
326 | struct iw_statistics *wstats = &priv->wstats; | |
e67d9d9d | 327 | int err; |
1da177e4 LT |
328 | unsigned long flags; |
329 | ||
330 | if (! netif_device_present(dev)) { | |
331 | printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", | |
332 | dev->name); | |
333 | return NULL; /* FIXME: Can we do better than this? */ | |
334 | } | |
335 | ||
e67d9d9d DG |
336 | /* If busy, return the old stats. Returning NULL may cause |
337 | * the interface to disappear from /proc/net/wireless */ | |
1da177e4 | 338 | if (orinoco_lock(priv, &flags) != 0) |
e67d9d9d DG |
339 | return wstats; |
340 | ||
341 | /* We can't really wait for the tallies inquiry command to | |
342 | * complete, so we just use the previous results and trigger | |
343 | * a new tallies inquiry command for next time - Jean II */ | |
344 | /* FIXME: Really we should wait for the inquiry to come back - | |
345 | * as it is the stats we give don't make a whole lot of sense. | |
346 | * Unfortunately, it's not clear how to do that within the | |
347 | * wireless extensions framework: I think we're in user | |
348 | * context, but a lock seems to be held by the time we get in | |
349 | * here so we're not safe to sleep here. */ | |
350 | hermes_inquire(hw, HERMES_INQ_TALLIES); | |
1da177e4 LT |
351 | |
352 | if (priv->iw_mode == IW_MODE_ADHOC) { | |
353 | memset(&wstats->qual, 0, sizeof(wstats->qual)); | |
354 | /* If a spy address is defined, we report stats of the | |
355 | * first spy address - Jean II */ | |
356 | if (SPY_NUMBER(priv)) { | |
343c686c PR |
357 | wstats->qual.qual = priv->spy_data.spy_stat[0].qual; |
358 | wstats->qual.level = priv->spy_data.spy_stat[0].level; | |
359 | wstats->qual.noise = priv->spy_data.spy_stat[0].noise; | |
360 | wstats->qual.updated = priv->spy_data.spy_stat[0].updated; | |
1da177e4 LT |
361 | } |
362 | } else { | |
363 | struct { | |
a208c4e1 | 364 | __le16 qual, signal, noise, unused; |
1da177e4 LT |
365 | } __attribute__ ((packed)) cq; |
366 | ||
367 | err = HERMES_READ_RECORD(hw, USER_BAP, | |
368 | HERMES_RID_COMMSQUALITY, &cq); | |
e67d9d9d DG |
369 | |
370 | if (!err) { | |
371 | wstats->qual.qual = (int)le16_to_cpu(cq.qual); | |
372 | wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; | |
373 | wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; | |
374 | wstats->qual.updated = 7; | |
375 | } | |
1da177e4 LT |
376 | } |
377 | ||
1da177e4 | 378 | orinoco_unlock(priv, &flags); |
1da177e4 LT |
379 | return wstats; |
380 | } | |
381 | ||
382 | static void orinoco_set_multicast_list(struct net_device *dev) | |
383 | { | |
384 | struct orinoco_private *priv = netdev_priv(dev); | |
385 | unsigned long flags; | |
386 | ||
387 | if (orinoco_lock(priv, &flags) != 0) { | |
388 | printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " | |
389 | "called when hw_unavailable\n", dev->name); | |
390 | return; | |
391 | } | |
392 | ||
393 | __orinoco_set_multicast_list(dev); | |
394 | orinoco_unlock(priv, &flags); | |
395 | } | |
396 | ||
397 | static int orinoco_change_mtu(struct net_device *dev, int new_mtu) | |
398 | { | |
399 | struct orinoco_private *priv = netdev_priv(dev); | |
400 | ||
401 | if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) ) | |
402 | return -EINVAL; | |
403 | ||
b453872c | 404 | if ( (new_mtu + ENCAPS_OVERHEAD + IEEE80211_HLEN) > |
1da177e4 LT |
405 | (priv->nicbuf_size - ETH_HLEN) ) |
406 | return -EINVAL; | |
407 | ||
408 | dev->mtu = new_mtu; | |
409 | ||
410 | return 0; | |
411 | } | |
412 | ||
413 | /********************************************************************/ | |
414 | /* Tx path */ | |
415 | /********************************************************************/ | |
416 | ||
417 | static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) | |
418 | { | |
419 | struct orinoco_private *priv = netdev_priv(dev); | |
420 | struct net_device_stats *stats = &priv->stats; | |
421 | hermes_t *hw = &priv->hw; | |
422 | int err = 0; | |
423 | u16 txfid = priv->txfid; | |
1da177e4 | 424 | struct ethhdr *eh; |
a28dc81d | 425 | int data_off; |
1da177e4 LT |
426 | struct hermes_tx_descriptor desc; |
427 | unsigned long flags; | |
428 | ||
1da177e4 LT |
429 | if (! netif_running(dev)) { |
430 | printk(KERN_ERR "%s: Tx on stopped device!\n", | |
431 | dev->name); | |
b34b867e | 432 | return NETDEV_TX_BUSY; |
1da177e4 LT |
433 | } |
434 | ||
435 | if (netif_queue_stopped(dev)) { | |
436 | printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", | |
437 | dev->name); | |
b34b867e | 438 | return NETDEV_TX_BUSY; |
1da177e4 LT |
439 | } |
440 | ||
441 | if (orinoco_lock(priv, &flags) != 0) { | |
442 | printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", | |
443 | dev->name); | |
b34b867e | 444 | return NETDEV_TX_BUSY; |
1da177e4 LT |
445 | } |
446 | ||
98c4cae1 | 447 | if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) { |
1da177e4 LT |
448 | /* Oops, the firmware hasn't established a connection, |
449 | silently drop the packet (this seems to be the | |
450 | safest approach). */ | |
470e2aa6 | 451 | goto drop; |
1da177e4 LT |
452 | } |
453 | ||
8d5be088 | 454 | /* Check packet length */ |
a28dc81d | 455 | if (skb->len < ETH_HLEN) |
470e2aa6 | 456 | goto drop; |
1da177e4 LT |
457 | |
458 | eh = (struct ethhdr *)skb->data; | |
459 | ||
460 | memset(&desc, 0, sizeof(desc)); | |
461 | desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX); | |
462 | err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0); | |
463 | if (err) { | |
464 | if (net_ratelimit()) | |
465 | printk(KERN_ERR "%s: Error %d writing Tx descriptor " | |
466 | "to BAP\n", dev->name, err); | |
470e2aa6 | 467 | goto busy; |
1da177e4 LT |
468 | } |
469 | ||
470 | /* Clear the 802.11 header and data length fields - some | |
471 | * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused | |
472 | * if this isn't done. */ | |
473 | hermes_clear_words(hw, HERMES_DATA0, | |
474 | HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); | |
475 | ||
476 | /* Encapsulate Ethernet-II frames */ | |
477 | if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ | |
a28dc81d PR |
478 | struct header_struct { |
479 | struct ethhdr eth; /* 802.3 header */ | |
480 | u8 encap[6]; /* 802.2 header */ | |
481 | } __attribute__ ((packed)) hdr; | |
482 | ||
483 | /* Strip destination and source from the data */ | |
484 | skb_pull(skb, 2 * ETH_ALEN); | |
485 | data_off = HERMES_802_2_OFFSET + sizeof(encaps_hdr); | |
486 | ||
487 | /* And move them to a separate header */ | |
488 | memcpy(&hdr.eth, eh, 2 * ETH_ALEN); | |
489 | hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len); | |
490 | memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); | |
491 | ||
492 | err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr), | |
493 | txfid, HERMES_802_3_OFFSET); | |
1da177e4 LT |
494 | if (err) { |
495 | if (net_ratelimit()) | |
496 | printk(KERN_ERR "%s: Error %d writing packet " | |
497 | "header to BAP\n", dev->name, err); | |
470e2aa6 | 498 | goto busy; |
1da177e4 LT |
499 | } |
500 | } else { /* IEEE 802.3 frame */ | |
1da177e4 | 501 | data_off = HERMES_802_3_OFFSET; |
1da177e4 LT |
502 | } |
503 | ||
a28dc81d | 504 | err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len, |
1da177e4 LT |
505 | txfid, data_off); |
506 | if (err) { | |
507 | printk(KERN_ERR "%s: Error %d writing packet to BAP\n", | |
508 | dev->name, err); | |
470e2aa6 | 509 | goto busy; |
1da177e4 LT |
510 | } |
511 | ||
512 | /* Finally, we actually initiate the send */ | |
513 | netif_stop_queue(dev); | |
514 | ||
515 | err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, | |
516 | txfid, NULL); | |
517 | if (err) { | |
518 | netif_start_queue(dev); | |
c367c21c AM |
519 | if (net_ratelimit()) |
520 | printk(KERN_ERR "%s: Error %d transmitting packet\n", | |
521 | dev->name, err); | |
470e2aa6 | 522 | goto busy; |
1da177e4 LT |
523 | } |
524 | ||
525 | dev->trans_start = jiffies; | |
a28dc81d | 526 | stats->tx_bytes += data_off + skb->len; |
470e2aa6 | 527 | goto ok; |
1da177e4 | 528 | |
470e2aa6 PR |
529 | drop: |
530 | stats->tx_errors++; | |
531 | stats->tx_dropped++; | |
1da177e4 | 532 | |
470e2aa6 PR |
533 | ok: |
534 | orinoco_unlock(priv, &flags); | |
1da177e4 | 535 | dev_kfree_skb(skb); |
b34b867e | 536 | return NETDEV_TX_OK; |
1da177e4 | 537 | |
470e2aa6 | 538 | busy: |
2c1bd260 JB |
539 | if (err == -EIO) |
540 | schedule_work(&priv->reset_work); | |
1da177e4 | 541 | orinoco_unlock(priv, &flags); |
b34b867e | 542 | return NETDEV_TX_BUSY; |
1da177e4 LT |
543 | } |
544 | ||
545 | static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw) | |
546 | { | |
547 | struct orinoco_private *priv = netdev_priv(dev); | |
548 | u16 fid = hermes_read_regn(hw, ALLOCFID); | |
549 | ||
550 | if (fid != priv->txfid) { | |
551 | if (fid != DUMMY_FID) | |
552 | printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", | |
553 | dev->name, fid); | |
554 | return; | |
555 | } | |
556 | ||
557 | hermes_write_regn(hw, ALLOCFID, DUMMY_FID); | |
558 | } | |
559 | ||
560 | static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw) | |
561 | { | |
562 | struct orinoco_private *priv = netdev_priv(dev); | |
563 | struct net_device_stats *stats = &priv->stats; | |
564 | ||
565 | stats->tx_packets++; | |
566 | ||
567 | netif_wake_queue(dev); | |
568 | ||
569 | hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); | |
570 | } | |
571 | ||
572 | static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) | |
573 | { | |
574 | struct orinoco_private *priv = netdev_priv(dev); | |
575 | struct net_device_stats *stats = &priv->stats; | |
576 | u16 fid = hermes_read_regn(hw, TXCOMPLFID); | |
d133ae4c | 577 | u16 status; |
30c2d3b4 | 578 | struct hermes_txexc_data hdr; |
1da177e4 LT |
579 | int err = 0; |
580 | ||
581 | if (fid == DUMMY_FID) | |
582 | return; /* Nothing's really happened */ | |
583 | ||
48ca7038 | 584 | /* Read part of the frame header - we need status and addr1 */ |
95dd91fb | 585 | err = hermes_bap_pread(hw, IRQ_BAP, &hdr, |
30c2d3b4 | 586 | sizeof(struct hermes_txexc_data), |
95dd91fb CH |
587 | fid, 0); |
588 | ||
589 | hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); | |
590 | stats->tx_errors++; | |
591 | ||
1da177e4 LT |
592 | if (err) { |
593 | printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " | |
594 | "(FID=%04X error %d)\n", | |
595 | dev->name, fid, err); | |
95dd91fb | 596 | return; |
1da177e4 LT |
597 | } |
598 | ||
95dd91fb CH |
599 | DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, |
600 | err, fid); | |
601 | ||
602 | /* We produce a TXDROP event only for retry or lifetime | |
603 | * exceeded, because that's the only status that really mean | |
604 | * that this particular node went away. | |
605 | * Other errors means that *we* screwed up. - Jean II */ | |
30c2d3b4 | 606 | status = le16_to_cpu(hdr.desc.status); |
d133ae4c | 607 | if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { |
95dd91fb CH |
608 | union iwreq_data wrqu; |
609 | ||
610 | /* Copy 802.11 dest address. | |
611 | * We use the 802.11 header because the frame may | |
612 | * not be 802.3 or may be mangled... | |
613 | * In Ad-Hoc mode, it will be the node address. | |
614 | * In managed mode, it will be most likely the AP addr | |
615 | * User space will figure out how to convert it to | |
616 | * whatever it needs (IP address or else). | |
617 | * - Jean II */ | |
618 | memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); | |
619 | wrqu.addr.sa_family = ARPHRD_ETHER; | |
620 | ||
621 | /* Send event to user space */ | |
622 | wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); | |
623 | } | |
1da177e4 LT |
624 | |
625 | netif_wake_queue(dev); | |
1da177e4 LT |
626 | } |
627 | ||
628 | static void orinoco_tx_timeout(struct net_device *dev) | |
629 | { | |
630 | struct orinoco_private *priv = netdev_priv(dev); | |
631 | struct net_device_stats *stats = &priv->stats; | |
632 | struct hermes *hw = &priv->hw; | |
633 | ||
634 | printk(KERN_WARNING "%s: Tx timeout! " | |
635 | "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", | |
636 | dev->name, hermes_read_regn(hw, ALLOCFID), | |
637 | hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); | |
638 | ||
639 | stats->tx_errors++; | |
640 | ||
641 | schedule_work(&priv->reset_work); | |
642 | } | |
643 | ||
644 | /********************************************************************/ | |
645 | /* Rx path (data frames) */ | |
646 | /********************************************************************/ | |
647 | ||
648 | /* Does the frame have a SNAP header indicating it should be | |
649 | * de-encapsulated to Ethernet-II? */ | |
650 | static inline int is_ethersnap(void *_hdr) | |
651 | { | |
652 | u8 *hdr = _hdr; | |
653 | ||
654 | /* We de-encapsulate all packets which, a) have SNAP headers | |
655 | * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header | |
656 | * and where b) the OUI of the SNAP header is 00:00:00 or | |
657 | * 00:00:f8 - we need both because different APs appear to use | |
658 | * different OUIs for some reason */ | |
659 | return (memcmp(hdr, &encaps_hdr, 5) == 0) | |
660 | && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) ); | |
661 | } | |
662 | ||
663 | static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, | |
664 | int level, int noise) | |
665 | { | |
343c686c PR |
666 | struct iw_quality wstats; |
667 | wstats.level = level - 0x95; | |
668 | wstats.noise = noise - 0x95; | |
669 | wstats.qual = (level > noise) ? (level - noise) : 0; | |
670 | wstats.updated = 7; | |
671 | /* Update spy records */ | |
672 | wireless_spy_update(dev, mac, &wstats); | |
1da177e4 LT |
673 | } |
674 | ||
675 | static void orinoco_stat_gather(struct net_device *dev, | |
676 | struct sk_buff *skb, | |
677 | struct hermes_rx_descriptor *desc) | |
678 | { | |
679 | struct orinoco_private *priv = netdev_priv(dev); | |
680 | ||
681 | /* Using spy support with lots of Rx packets, like in an | |
682 | * infrastructure (AP), will really slow down everything, because | |
683 | * the MAC address must be compared to each entry of the spy list. | |
684 | * If the user really asks for it (set some address in the | |
685 | * spy list), we do it, but he will pay the price. | |
686 | * Note that to get here, you need both WIRELESS_SPY | |
687 | * compiled in AND some addresses in the list !!! | |
688 | */ | |
689 | /* Note : gcc will optimise the whole section away if | |
690 | * WIRELESS_SPY is not defined... - Jean II */ | |
691 | if (SPY_NUMBER(priv)) { | |
692 | orinoco_spy_gather(dev, skb->mac.raw + ETH_ALEN, | |
693 | desc->signal, desc->silence); | |
694 | } | |
695 | } | |
696 | ||
98c4cae1 CH |
697 | /* |
698 | * orinoco_rx_monitor - handle received monitor frames. | |
699 | * | |
700 | * Arguments: | |
701 | * dev network device | |
702 | * rxfid received FID | |
703 | * desc rx descriptor of the frame | |
704 | * | |
705 | * Call context: interrupt | |
706 | */ | |
707 | static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, | |
708 | struct hermes_rx_descriptor *desc) | |
709 | { | |
710 | u32 hdrlen = 30; /* return full header by default */ | |
711 | u32 datalen = 0; | |
712 | u16 fc; | |
713 | int err; | |
714 | int len; | |
715 | struct sk_buff *skb; | |
716 | struct orinoco_private *priv = netdev_priv(dev); | |
717 | struct net_device_stats *stats = &priv->stats; | |
718 | hermes_t *hw = &priv->hw; | |
719 | ||
720 | len = le16_to_cpu(desc->data_len); | |
721 | ||
722 | /* Determine the size of the header and the data */ | |
723 | fc = le16_to_cpu(desc->frame_ctl); | |
724 | switch (fc & IEEE80211_FCTL_FTYPE) { | |
725 | case IEEE80211_FTYPE_DATA: | |
726 | if ((fc & IEEE80211_FCTL_TODS) | |
727 | && (fc & IEEE80211_FCTL_FROMDS)) | |
728 | hdrlen = 30; | |
729 | else | |
730 | hdrlen = 24; | |
731 | datalen = len; | |
732 | break; | |
733 | case IEEE80211_FTYPE_MGMT: | |
734 | hdrlen = 24; | |
735 | datalen = len; | |
736 | break; | |
737 | case IEEE80211_FTYPE_CTL: | |
738 | switch (fc & IEEE80211_FCTL_STYPE) { | |
739 | case IEEE80211_STYPE_PSPOLL: | |
740 | case IEEE80211_STYPE_RTS: | |
741 | case IEEE80211_STYPE_CFEND: | |
742 | case IEEE80211_STYPE_CFENDACK: | |
743 | hdrlen = 16; | |
744 | break; | |
745 | case IEEE80211_STYPE_CTS: | |
746 | case IEEE80211_STYPE_ACK: | |
747 | hdrlen = 10; | |
748 | break; | |
749 | } | |
750 | break; | |
751 | default: | |
752 | /* Unknown frame type */ | |
753 | break; | |
754 | } | |
755 | ||
756 | /* sanity check the length */ | |
757 | if (datalen > IEEE80211_DATA_LEN + 12) { | |
758 | printk(KERN_DEBUG "%s: oversized monitor frame, " | |
759 | "data length = %d\n", dev->name, datalen); | |
98c4cae1 CH |
760 | stats->rx_length_errors++; |
761 | goto update_stats; | |
762 | } | |
763 | ||
764 | skb = dev_alloc_skb(hdrlen + datalen); | |
765 | if (!skb) { | |
766 | printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", | |
767 | dev->name); | |
bb6e093d | 768 | goto update_stats; |
98c4cae1 CH |
769 | } |
770 | ||
771 | /* Copy the 802.11 header to the skb */ | |
772 | memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen); | |
773 | skb->mac.raw = skb->data; | |
774 | ||
775 | /* If any, copy the data from the card to the skb */ | |
776 | if (datalen > 0) { | |
777 | err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), | |
778 | ALIGN(datalen, 2), rxfid, | |
779 | HERMES_802_2_OFFSET); | |
780 | if (err) { | |
781 | printk(KERN_ERR "%s: error %d reading monitor frame\n", | |
782 | dev->name, err); | |
783 | goto drop; | |
784 | } | |
785 | } | |
786 | ||
787 | skb->dev = dev; | |
788 | skb->ip_summed = CHECKSUM_NONE; | |
789 | skb->pkt_type = PACKET_OTHERHOST; | |
790 | skb->protocol = __constant_htons(ETH_P_802_2); | |
791 | ||
792 | dev->last_rx = jiffies; | |
793 | stats->rx_packets++; | |
794 | stats->rx_bytes += skb->len; | |
795 | ||
796 | netif_rx(skb); | |
797 | return; | |
798 | ||
799 | drop: | |
800 | dev_kfree_skb_irq(skb); | |
801 | update_stats: | |
802 | stats->rx_errors++; | |
803 | stats->rx_dropped++; | |
804 | } | |
805 | ||
1da177e4 LT |
806 | static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) |
807 | { | |
808 | struct orinoco_private *priv = netdev_priv(dev); | |
809 | struct net_device_stats *stats = &priv->stats; | |
810 | struct iw_statistics *wstats = &priv->wstats; | |
811 | struct sk_buff *skb = NULL; | |
8f2abf44 CH |
812 | u16 rxfid, status, fc; |
813 | int length; | |
1da177e4 | 814 | struct hermes_rx_descriptor desc; |
8f2abf44 | 815 | struct ethhdr *hdr; |
1da177e4 LT |
816 | int err; |
817 | ||
818 | rxfid = hermes_read_regn(hw, RXFID); | |
819 | ||
820 | err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), | |
821 | rxfid, 0); | |
822 | if (err) { | |
823 | printk(KERN_ERR "%s: error %d reading Rx descriptor. " | |
824 | "Frame dropped.\n", dev->name, err); | |
98c4cae1 | 825 | goto update_stats; |
1da177e4 LT |
826 | } |
827 | ||
828 | status = le16_to_cpu(desc.status); | |
829 | ||
98c4cae1 CH |
830 | if (status & HERMES_RXSTAT_BADCRC) { |
831 | DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", | |
832 | dev->name); | |
833 | stats->rx_crc_errors++; | |
834 | goto update_stats; | |
1da177e4 LT |
835 | } |
836 | ||
98c4cae1 CH |
837 | /* Handle frames in monitor mode */ |
838 | if (priv->iw_mode == IW_MODE_MONITOR) { | |
839 | orinoco_rx_monitor(dev, rxfid, &desc); | |
840 | return; | |
841 | } | |
1da177e4 | 842 | |
98c4cae1 CH |
843 | if (status & HERMES_RXSTAT_UNDECRYPTABLE) { |
844 | DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", | |
845 | dev->name); | |
846 | wstats->discard.code++; | |
847 | goto update_stats; | |
1da177e4 LT |
848 | } |
849 | ||
8f2abf44 CH |
850 | length = le16_to_cpu(desc.data_len); |
851 | fc = le16_to_cpu(desc.frame_ctl); | |
852 | ||
1da177e4 LT |
853 | /* Sanity checks */ |
854 | if (length < 3) { /* No for even an 802.2 LLC header */ | |
855 | /* At least on Symbol firmware with PCF we get quite a | |
856 | lot of these legitimately - Poll frames with no | |
857 | data. */ | |
98c4cae1 | 858 | return; |
1da177e4 | 859 | } |
b453872c | 860 | if (length > IEEE80211_DATA_LEN) { |
1da177e4 LT |
861 | printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", |
862 | dev->name, length); | |
863 | stats->rx_length_errors++; | |
98c4cae1 | 864 | goto update_stats; |
1da177e4 LT |
865 | } |
866 | ||
867 | /* We need space for the packet data itself, plus an ethernet | |
868 | header, plus 2 bytes so we can align the IP header on a | |
869 | 32bit boundary, plus 1 byte so we can read in odd length | |
870 | packets from the card, which has an IO granularity of 16 | |
871 | bits */ | |
872 | skb = dev_alloc_skb(length+ETH_HLEN+2+1); | |
873 | if (!skb) { | |
874 | printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", | |
875 | dev->name); | |
98c4cae1 | 876 | goto update_stats; |
1da177e4 LT |
877 | } |
878 | ||
8f2abf44 CH |
879 | /* We'll prepend the header, so reserve space for it. The worst |
880 | case is no decapsulation, when 802.3 header is prepended and | |
881 | nothing is removed. 2 is for aligning the IP header. */ | |
882 | skb_reserve(skb, ETH_HLEN + 2); | |
883 | ||
884 | err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length), | |
885 | ALIGN(length, 2), rxfid, | |
886 | HERMES_802_2_OFFSET); | |
887 | if (err) { | |
888 | printk(KERN_ERR "%s: error %d reading frame. " | |
889 | "Frame dropped.\n", dev->name, err); | |
8f2abf44 CH |
890 | goto drop; |
891 | } | |
1da177e4 LT |
892 | |
893 | /* Handle decapsulation | |
894 | * In most cases, the firmware tell us about SNAP frames. | |
895 | * For some reason, the SNAP frames sent by LinkSys APs | |
896 | * are not properly recognised by most firmwares. | |
897 | * So, check ourselves */ | |
8f2abf44 CH |
898 | if (length >= ENCAPS_OVERHEAD && |
899 | (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || | |
900 | ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || | |
901 | is_ethersnap(skb->data))) { | |
1da177e4 LT |
902 | /* These indicate a SNAP within 802.2 LLC within |
903 | 802.11 frame which we'll need to de-encapsulate to | |
904 | the original EthernetII frame. */ | |
8f2abf44 | 905 | hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD); |
1da177e4 | 906 | } else { |
8f2abf44 CH |
907 | /* 802.3 frame - prepend 802.3 header as is */ |
908 | hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); | |
909 | hdr->h_proto = htons(length); | |
1da177e4 | 910 | } |
8f2abf44 CH |
911 | memcpy(hdr->h_dest, desc.addr1, ETH_ALEN); |
912 | if (fc & IEEE80211_FCTL_FROMDS) | |
913 | memcpy(hdr->h_source, desc.addr3, ETH_ALEN); | |
914 | else | |
915 | memcpy(hdr->h_source, desc.addr2, ETH_ALEN); | |
1da177e4 LT |
916 | |
917 | dev->last_rx = jiffies; | |
918 | skb->dev = dev; | |
919 | skb->protocol = eth_type_trans(skb, dev); | |
920 | skb->ip_summed = CHECKSUM_NONE; | |
8f2abf44 CH |
921 | if (fc & IEEE80211_FCTL_TODS) |
922 | skb->pkt_type = PACKET_OTHERHOST; | |
1da177e4 LT |
923 | |
924 | /* Process the wireless stats if needed */ | |
925 | orinoco_stat_gather(dev, skb, &desc); | |
926 | ||
927 | /* Pass the packet to the networking stack */ | |
928 | netif_rx(skb); | |
929 | stats->rx_packets++; | |
930 | stats->rx_bytes += length; | |
931 | ||
932 | return; | |
933 | ||
934 | drop: | |
98c4cae1 CH |
935 | dev_kfree_skb_irq(skb); |
936 | update_stats: | |
937 | stats->rx_errors++; | |
1da177e4 | 938 | stats->rx_dropped++; |
1da177e4 LT |
939 | } |
940 | ||
941 | /********************************************************************/ | |
942 | /* Rx path (info frames) */ | |
943 | /********************************************************************/ | |
944 | ||
945 | static void print_linkstatus(struct net_device *dev, u16 status) | |
946 | { | |
947 | char * s; | |
948 | ||
949 | if (suppress_linkstatus) | |
950 | return; | |
951 | ||
952 | switch (status) { | |
953 | case HERMES_LINKSTATUS_NOT_CONNECTED: | |
954 | s = "Not Connected"; | |
955 | break; | |
956 | case HERMES_LINKSTATUS_CONNECTED: | |
957 | s = "Connected"; | |
958 | break; | |
959 | case HERMES_LINKSTATUS_DISCONNECTED: | |
960 | s = "Disconnected"; | |
961 | break; | |
962 | case HERMES_LINKSTATUS_AP_CHANGE: | |
963 | s = "AP Changed"; | |
964 | break; | |
965 | case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: | |
966 | s = "AP Out of Range"; | |
967 | break; | |
968 | case HERMES_LINKSTATUS_AP_IN_RANGE: | |
969 | s = "AP In Range"; | |
970 | break; | |
971 | case HERMES_LINKSTATUS_ASSOC_FAILED: | |
972 | s = "Association Failed"; | |
973 | break; | |
974 | default: | |
975 | s = "UNKNOWN"; | |
976 | } | |
977 | ||
978 | printk(KERN_INFO "%s: New link status: %s (%04x)\n", | |
979 | dev->name, s, status); | |
980 | } | |
981 | ||
16739b06 CH |
982 | /* Search scan results for requested BSSID, join it if found */ |
983 | static void orinoco_join_ap(struct net_device *dev) | |
984 | { | |
985 | struct orinoco_private *priv = netdev_priv(dev); | |
986 | struct hermes *hw = &priv->hw; | |
987 | int err; | |
988 | unsigned long flags; | |
989 | struct join_req { | |
990 | u8 bssid[ETH_ALEN]; | |
d133ae4c | 991 | __le16 channel; |
16739b06 CH |
992 | } __attribute__ ((packed)) req; |
993 | const int atom_len = offsetof(struct prism2_scan_apinfo, atim); | |
c89cc225 | 994 | struct prism2_scan_apinfo *atom = NULL; |
16739b06 | 995 | int offset = 4; |
c89cc225 | 996 | int found = 0; |
16739b06 CH |
997 | u8 *buf; |
998 | u16 len; | |
999 | ||
1000 | /* Allocate buffer for scan results */ | |
1001 | buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL); | |
1002 | if (! buf) | |
1003 | return; | |
1004 | ||
1005 | if (orinoco_lock(priv, &flags) != 0) | |
f3cb4cc1 | 1006 | goto fail_lock; |
16739b06 CH |
1007 | |
1008 | /* Sanity checks in case user changed something in the meantime */ | |
1009 | if (! priv->bssid_fixed) | |
1010 | goto out; | |
1011 | ||
1012 | if (strlen(priv->desired_essid) == 0) | |
1013 | goto out; | |
1014 | ||
1015 | /* Read scan results from the firmware */ | |
1016 | err = hermes_read_ltv(hw, USER_BAP, | |
1017 | HERMES_RID_SCANRESULTSTABLE, | |
1018 | MAX_SCAN_LEN, &len, buf); | |
1019 | if (err) { | |
1020 | printk(KERN_ERR "%s: Cannot read scan results\n", | |
1021 | dev->name); | |
1022 | goto out; | |
1023 | } | |
1024 | ||
1025 | len = HERMES_RECLEN_TO_BYTES(len); | |
1026 | ||
1027 | /* Go through the scan results looking for the channel of the AP | |
1028 | * we were requested to join */ | |
1029 | for (; offset + atom_len <= len; offset += atom_len) { | |
1030 | atom = (struct prism2_scan_apinfo *) (buf + offset); | |
c89cc225 PR |
1031 | if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) { |
1032 | found = 1; | |
1033 | break; | |
1034 | } | |
16739b06 CH |
1035 | } |
1036 | ||
c89cc225 PR |
1037 | if (! found) { |
1038 | DEBUG(1, "%s: Requested AP not found in scan results\n", | |
1039 | dev->name); | |
1040 | goto out; | |
1041 | } | |
16739b06 | 1042 | |
16739b06 CH |
1043 | memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); |
1044 | req.channel = atom->channel; /* both are little-endian */ | |
1045 | err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, | |
1046 | &req); | |
1047 | if (err) | |
1048 | printk(KERN_ERR "%s: Error issuing join request\n", dev->name); | |
1049 | ||
1050 | out: | |
16739b06 | 1051 | orinoco_unlock(priv, &flags); |
f3cb4cc1 PR |
1052 | |
1053 | fail_lock: | |
1054 | kfree(buf); | |
16739b06 CH |
1055 | } |
1056 | ||
95dd91fb CH |
1057 | /* Send new BSSID to userspace */ |
1058 | static void orinoco_send_wevents(struct net_device *dev) | |
1059 | { | |
1060 | struct orinoco_private *priv = netdev_priv(dev); | |
1061 | struct hermes *hw = &priv->hw; | |
1062 | union iwreq_data wrqu; | |
1063 | int err; | |
1064 | unsigned long flags; | |
1065 | ||
1066 | if (orinoco_lock(priv, &flags) != 0) | |
1067 | return; | |
1068 | ||
1069 | err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID, | |
1070 | ETH_ALEN, NULL, wrqu.ap_addr.sa_data); | |
1071 | if (err != 0) | |
8aeabc37 | 1072 | goto out; |
95dd91fb CH |
1073 | |
1074 | wrqu.ap_addr.sa_family = ARPHRD_ETHER; | |
1075 | ||
1076 | /* Send event to user space */ | |
1077 | wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); | |
8aeabc37 PR |
1078 | |
1079 | out: | |
95dd91fb CH |
1080 | orinoco_unlock(priv, &flags); |
1081 | } | |
1082 | ||
1da177e4 LT |
1083 | static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) |
1084 | { | |
1085 | struct orinoco_private *priv = netdev_priv(dev); | |
1086 | u16 infofid; | |
1087 | struct { | |
d133ae4c PR |
1088 | __le16 len; |
1089 | __le16 type; | |
1da177e4 LT |
1090 | } __attribute__ ((packed)) info; |
1091 | int len, type; | |
1092 | int err; | |
1093 | ||
1094 | /* This is an answer to an INQUIRE command that we did earlier, | |
1095 | * or an information "event" generated by the card | |
1096 | * The controller return to us a pseudo frame containing | |
1097 | * the information in question - Jean II */ | |
1098 | infofid = hermes_read_regn(hw, INFOFID); | |
1099 | ||
1100 | /* Read the info frame header - don't try too hard */ | |
1101 | err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info), | |
1102 | infofid, 0); | |
1103 | if (err) { | |
1104 | printk(KERN_ERR "%s: error %d reading info frame. " | |
1105 | "Frame dropped.\n", dev->name, err); | |
1106 | return; | |
1107 | } | |
1108 | ||
1109 | len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); | |
1110 | type = le16_to_cpu(info.type); | |
1111 | ||
1112 | switch (type) { | |
1113 | case HERMES_INQ_TALLIES: { | |
1114 | struct hermes_tallies_frame tallies; | |
1115 | struct iw_statistics *wstats = &priv->wstats; | |
1116 | ||
1117 | if (len > sizeof(tallies)) { | |
1118 | printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", | |
1119 | dev->name, len); | |
1120 | len = sizeof(tallies); | |
1121 | } | |
1122 | ||
84d8a2fb CH |
1123 | err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len, |
1124 | infofid, sizeof(info)); | |
1125 | if (err) | |
1126 | break; | |
1da177e4 LT |
1127 | |
1128 | /* Increment our various counters */ | |
1129 | /* wstats->discard.nwid - no wrong BSSID stuff */ | |
1130 | wstats->discard.code += | |
1131 | le16_to_cpu(tallies.RxWEPUndecryptable); | |
1132 | if (len == sizeof(tallies)) | |
1133 | wstats->discard.code += | |
1134 | le16_to_cpu(tallies.RxDiscards_WEPICVError) + | |
1135 | le16_to_cpu(tallies.RxDiscards_WEPExcluded); | |
1136 | wstats->discard.misc += | |
1137 | le16_to_cpu(tallies.TxDiscardsWrongSA); | |
1138 | wstats->discard.fragment += | |
1139 | le16_to_cpu(tallies.RxMsgInBadMsgFragments); | |
1140 | wstats->discard.retries += | |
1141 | le16_to_cpu(tallies.TxRetryLimitExceeded); | |
1142 | /* wstats->miss.beacon - no match */ | |
1143 | } | |
1144 | break; | |
1145 | case HERMES_INQ_LINKSTATUS: { | |
1146 | struct hermes_linkstatus linkstatus; | |
1147 | u16 newstatus; | |
1148 | int connected; | |
1149 | ||
8f2abf44 CH |
1150 | if (priv->iw_mode == IW_MODE_MONITOR) |
1151 | break; | |
1152 | ||
1da177e4 LT |
1153 | if (len != sizeof(linkstatus)) { |
1154 | printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", | |
1155 | dev->name, len); | |
1156 | break; | |
1157 | } | |
1158 | ||
84d8a2fb CH |
1159 | err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len, |
1160 | infofid, sizeof(info)); | |
1161 | if (err) | |
1162 | break; | |
1da177e4 LT |
1163 | newstatus = le16_to_cpu(linkstatus.linkstatus); |
1164 | ||
95dd91fb CH |
1165 | /* Symbol firmware uses "out of range" to signal that |
1166 | * the hostscan frame can be requested. */ | |
1167 | if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && | |
1168 | priv->firmware_type == FIRMWARE_TYPE_SYMBOL && | |
1169 | priv->has_hostscan && priv->scan_inprogress) { | |
1170 | hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); | |
1171 | break; | |
1172 | } | |
1173 | ||
1da177e4 LT |
1174 | connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) |
1175 | || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) | |
1176 | || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); | |
1177 | ||
1178 | if (connected) | |
1179 | netif_carrier_on(dev); | |
7bb7c3a3 | 1180 | else if (!ignore_disconnect) |
1da177e4 LT |
1181 | netif_carrier_off(dev); |
1182 | ||
95dd91fb CH |
1183 | if (newstatus != priv->last_linkstatus) { |
1184 | priv->last_linkstatus = newstatus; | |
1da177e4 | 1185 | print_linkstatus(dev, newstatus); |
95dd91fb CH |
1186 | /* The info frame contains only one word which is the |
1187 | * status (see hermes.h). The status is pretty boring | |
1188 | * in itself, that's why we export the new BSSID... | |
1189 | * Jean II */ | |
1190 | schedule_work(&priv->wevent_work); | |
1191 | } | |
1192 | } | |
1193 | break; | |
1194 | case HERMES_INQ_SCAN: | |
1195 | if (!priv->scan_inprogress && priv->bssid_fixed && | |
1196 | priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { | |
1197 | schedule_work(&priv->join_work); | |
1198 | break; | |
1199 | } | |
1200 | /* fall through */ | |
1201 | case HERMES_INQ_HOSTSCAN: | |
1202 | case HERMES_INQ_HOSTSCAN_SYMBOL: { | |
1203 | /* Result of a scanning. Contains information about | |
1204 | * cells in the vicinity - Jean II */ | |
1205 | union iwreq_data wrqu; | |
1206 | unsigned char *buf; | |
1207 | ||
1208 | /* Sanity check */ | |
1209 | if (len > 4096) { | |
1210 | printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", | |
1211 | dev->name, len); | |
1212 | break; | |
1213 | } | |
1214 | ||
1215 | /* We are a strict producer. If the previous scan results | |
1216 | * have not been consumed, we just have to drop this | |
1217 | * frame. We can't remove the previous results ourselves, | |
1218 | * that would be *very* racy... Jean II */ | |
1219 | if (priv->scan_result != NULL) { | |
1220 | printk(KERN_WARNING "%s: Previous scan results not consumed, dropping info frame.\n", dev->name); | |
1221 | break; | |
1222 | } | |
1da177e4 | 1223 | |
95dd91fb CH |
1224 | /* Allocate buffer for results */ |
1225 | buf = kmalloc(len, GFP_ATOMIC); | |
1226 | if (buf == NULL) | |
1227 | /* No memory, so can't printk()... */ | |
1228 | break; | |
1229 | ||
1230 | /* Read scan data */ | |
1231 | err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len, | |
1232 | infofid, sizeof(info)); | |
708218b0 PR |
1233 | if (err) { |
1234 | kfree(buf); | |
95dd91fb | 1235 | break; |
708218b0 | 1236 | } |
1da177e4 | 1237 | |
95dd91fb CH |
1238 | #ifdef ORINOCO_DEBUG |
1239 | { | |
1240 | int i; | |
1241 | printk(KERN_DEBUG "Scan result [%02X", buf[0]); | |
1242 | for(i = 1; i < (len * 2); i++) | |
1243 | printk(":%02X", buf[i]); | |
1244 | printk("]\n"); | |
1245 | } | |
1246 | #endif /* ORINOCO_DEBUG */ | |
1247 | ||
1248 | /* Allow the clients to access the results */ | |
1249 | priv->scan_len = len; | |
1250 | priv->scan_result = buf; | |
1251 | ||
1252 | /* Send an empty event to user space. | |
1253 | * We don't send the received data on the event because | |
1254 | * it would require us to do complex transcoding, and | |
1255 | * we want to minimise the work done in the irq handler | |
1256 | * Use a request to extract the data - Jean II */ | |
1257 | wrqu.data.length = 0; | |
1258 | wrqu.data.flags = 0; | |
1259 | wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); | |
1da177e4 LT |
1260 | } |
1261 | break; | |
95dd91fb CH |
1262 | case HERMES_INQ_SEC_STAT_AGERE: |
1263 | /* Security status (Agere specific) */ | |
1264 | /* Ignore this frame for now */ | |
1265 | if (priv->firmware_type == FIRMWARE_TYPE_AGERE) | |
1266 | break; | |
1267 | /* fall through */ | |
1da177e4 LT |
1268 | default: |
1269 | printk(KERN_DEBUG "%s: Unknown information frame received: " | |
1270 | "type 0x%04x, length %d\n", dev->name, type, len); | |
1271 | /* We don't actually do anything about it */ | |
1272 | break; | |
1273 | } | |
1274 | } | |
1275 | ||
1276 | static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) | |
1277 | { | |
1278 | if (net_ratelimit()) | |
1279 | printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); | |
1280 | } | |
1281 | ||
1282 | /********************************************************************/ | |
1283 | /* Internal hardware control routines */ | |
1284 | /********************************************************************/ | |
1285 | ||
1286 | int __orinoco_up(struct net_device *dev) | |
1287 | { | |
1288 | struct orinoco_private *priv = netdev_priv(dev); | |
1289 | struct hermes *hw = &priv->hw; | |
1290 | int err; | |
1291 | ||
84d8a2fb CH |
1292 | netif_carrier_off(dev); /* just to make sure */ |
1293 | ||
1da177e4 LT |
1294 | err = __orinoco_program_rids(dev); |
1295 | if (err) { | |
1296 | printk(KERN_ERR "%s: Error %d configuring card\n", | |
1297 | dev->name, err); | |
1298 | return err; | |
1299 | } | |
1300 | ||
1301 | /* Fire things up again */ | |
1302 | hermes_set_irqmask(hw, ORINOCO_INTEN); | |
1303 | err = hermes_enable_port(hw, 0); | |
1304 | if (err) { | |
1305 | printk(KERN_ERR "%s: Error %d enabling MAC port\n", | |
1306 | dev->name, err); | |
1307 | return err; | |
1308 | } | |
1309 | ||
1310 | netif_start_queue(dev); | |
1311 | ||
1312 | return 0; | |
1313 | } | |
1314 | ||
1315 | int __orinoco_down(struct net_device *dev) | |
1316 | { | |
1317 | struct orinoco_private *priv = netdev_priv(dev); | |
1318 | struct hermes *hw = &priv->hw; | |
1319 | int err; | |
1320 | ||
1321 | netif_stop_queue(dev); | |
1322 | ||
1323 | if (! priv->hw_unavailable) { | |
1324 | if (! priv->broken_disableport) { | |
1325 | err = hermes_disable_port(hw, 0); | |
1326 | if (err) { | |
1327 | /* Some firmwares (e.g. Intersil 1.3.x) seem | |
1328 | * to have problems disabling the port, oh | |
1329 | * well, too bad. */ | |
1330 | printk(KERN_WARNING "%s: Error %d disabling MAC port\n", | |
1331 | dev->name, err); | |
1332 | priv->broken_disableport = 1; | |
1333 | } | |
1334 | } | |
1335 | hermes_set_irqmask(hw, 0); | |
1336 | hermes_write_regn(hw, EVACK, 0xffff); | |
1337 | } | |
1338 | ||
1339 | /* firmware will have to reassociate */ | |
1340 | netif_carrier_off(dev); | |
1341 | priv->last_linkstatus = 0xffff; | |
1342 | ||
1343 | return 0; | |
1344 | } | |
1345 | ||
37a6c611 | 1346 | static int orinoco_allocate_fid(struct net_device *dev) |
1da177e4 LT |
1347 | { |
1348 | struct orinoco_private *priv = netdev_priv(dev); | |
1349 | struct hermes *hw = &priv->hw; | |
1350 | int err; | |
1351 | ||
1da177e4 | 1352 | err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); |
b24d4582 | 1353 | if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { |
1da177e4 LT |
1354 | /* Try workaround for old Symbol firmware bug */ |
1355 | printk(KERN_WARNING "%s: firmware ALLOC bug detected " | |
1356 | "(old Symbol firmware?). Trying to work around... ", | |
1357 | dev->name); | |
1358 | ||
1359 | priv->nicbuf_size = TX_NICBUF_SIZE_BUG; | |
1360 | err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); | |
1361 | if (err) | |
1362 | printk("failed!\n"); | |
1363 | else | |
1364 | printk("ok.\n"); | |
1365 | } | |
1366 | ||
1367 | return err; | |
1368 | } | |
1369 | ||
37a6c611 PR |
1370 | int orinoco_reinit_firmware(struct net_device *dev) |
1371 | { | |
1372 | struct orinoco_private *priv = netdev_priv(dev); | |
1373 | struct hermes *hw = &priv->hw; | |
1374 | int err; | |
1375 | ||
1376 | err = hermes_init(hw); | |
1377 | if (!err) | |
1378 | err = orinoco_allocate_fid(dev); | |
1379 | ||
1380 | return err; | |
1381 | } | |
1382 | ||
1da177e4 LT |
1383 | static int __orinoco_hw_set_bitrate(struct orinoco_private *priv) |
1384 | { | |
1385 | hermes_t *hw = &priv->hw; | |
1386 | int err = 0; | |
1387 | ||
1388 | if (priv->bitratemode >= BITRATE_TABLE_SIZE) { | |
1389 | printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", | |
1390 | priv->ndev->name, priv->bitratemode); | |
1391 | return -EINVAL; | |
1392 | } | |
1393 | ||
1394 | switch (priv->firmware_type) { | |
1395 | case FIRMWARE_TYPE_AGERE: | |
1396 | err = hermes_write_wordrec(hw, USER_BAP, | |
1397 | HERMES_RID_CNFTXRATECONTROL, | |
1398 | bitrate_table[priv->bitratemode].agere_txratectrl); | |
1399 | break; | |
1400 | case FIRMWARE_TYPE_INTERSIL: | |
1401 | case FIRMWARE_TYPE_SYMBOL: | |
1402 | err = hermes_write_wordrec(hw, USER_BAP, | |
1403 | HERMES_RID_CNFTXRATECONTROL, | |
1404 | bitrate_table[priv->bitratemode].intersil_txratectrl); | |
1405 | break; | |
1406 | default: | |
1407 | BUG(); | |
1408 | } | |
1409 | ||
1410 | return err; | |
1411 | } | |
1412 | ||
16739b06 CH |
1413 | /* Set fixed AP address */ |
1414 | static int __orinoco_hw_set_wap(struct orinoco_private *priv) | |
1415 | { | |
1416 | int roaming_flag; | |
1417 | int err = 0; | |
1418 | hermes_t *hw = &priv->hw; | |
1419 | ||
1420 | switch (priv->firmware_type) { | |
1421 | case FIRMWARE_TYPE_AGERE: | |
1422 | /* not supported */ | |
1423 | break; | |
1424 | case FIRMWARE_TYPE_INTERSIL: | |
1425 | if (priv->bssid_fixed) | |
1426 | roaming_flag = 2; | |
1427 | else | |
1428 | roaming_flag = 1; | |
1429 | ||
1430 | err = hermes_write_wordrec(hw, USER_BAP, | |
1431 | HERMES_RID_CNFROAMINGMODE, | |
1432 | roaming_flag); | |
1433 | break; | |
1434 | case FIRMWARE_TYPE_SYMBOL: | |
1435 | err = HERMES_WRITE_RECORD(hw, USER_BAP, | |
1436 | HERMES_RID_CNFMANDATORYBSSID_SYMBOL, | |
1437 | &priv->desired_bssid); | |
1438 | break; | |
1439 | } | |
1440 | return err; | |
1441 | } | |
1442 | ||
1da177e4 LT |
1443 | /* Change the WEP keys and/or the current keys. Can be called |
1444 | * either from __orinoco_hw_setup_wep() or directly from | |
1445 | * orinoco_ioctl_setiwencode(). In the later case the association | |
1446 | * with the AP is not broken (if the firmware can handle it), | |
1447 | * which is needed for 802.1x implementations. */ | |
1448 | static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) | |
1449 | { | |
1450 | hermes_t *hw = &priv->hw; | |
1451 | int err = 0; | |
1452 | ||
1453 | switch (priv->firmware_type) { | |
1454 | case FIRMWARE_TYPE_AGERE: | |
1455 | err = HERMES_WRITE_RECORD(hw, USER_BAP, | |
1456 | HERMES_RID_CNFWEPKEYS_AGERE, | |
1457 | &priv->keys); | |
1458 | if (err) | |
1459 | return err; | |
1460 | err = hermes_write_wordrec(hw, USER_BAP, | |
1461 | HERMES_RID_CNFTXKEY_AGERE, | |
1462 | priv->tx_key); | |
1463 | if (err) | |
1464 | return err; | |
1465 | break; | |
1466 | case FIRMWARE_TYPE_INTERSIL: | |
1467 | case FIRMWARE_TYPE_SYMBOL: | |
1468 | { | |
1469 | int keylen; | |
1470 | int i; | |
1471 | ||
1472 | /* Force uniform key length to work around firmware bugs */ | |
1473 | keylen = le16_to_cpu(priv->keys[priv->tx_key].len); | |
1474 | ||
1475 | if (keylen > LARGE_KEY_SIZE) { | |
1476 | printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", | |
1477 | priv->ndev->name, priv->tx_key, keylen); | |
1478 | return -E2BIG; | |
1479 | } | |
1480 | ||
1481 | /* Write all 4 keys */ | |
1482 | for(i = 0; i < ORINOCO_MAX_KEYS; i++) { | |
1483 | err = hermes_write_ltv(hw, USER_BAP, | |
1484 | HERMES_RID_CNFDEFAULTKEY0 + i, | |
1485 | HERMES_BYTES_TO_RECLEN(keylen), | |
1486 | priv->keys[i].data); | |
1487 | if (err) | |
1488 | return err; | |
1489 | } | |
1490 | ||
1491 | /* Write the index of the key used in transmission */ | |
1492 | err = hermes_write_wordrec(hw, USER_BAP, | |
1493 | HERMES_RID_CNFWEPDEFAULTKEYID, | |
1494 | priv->tx_key); | |
1495 | if (err) | |
1496 | return err; | |
1497 | } | |
1498 | break; | |
1499 | } | |
1500 | ||
1501 | return 0; | |
1502 | } | |
1503 | ||
1504 | static int __orinoco_hw_setup_wep(struct orinoco_private *priv) | |
1505 | { | |
1506 | hermes_t *hw = &priv->hw; | |
1507 | int err = 0; | |
1508 | int master_wep_flag; | |
1509 | int auth_flag; | |
1510 | ||
1511 | if (priv->wep_on) | |
1512 | __orinoco_hw_setup_wepkeys(priv); | |
1513 | ||
1514 | if (priv->wep_restrict) | |
1515 | auth_flag = HERMES_AUTH_SHARED_KEY; | |
1516 | else | |
1517 | auth_flag = HERMES_AUTH_OPEN; | |
1518 | ||
1519 | switch (priv->firmware_type) { | |
1520 | case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ | |
1521 | if (priv->wep_on) { | |
1522 | /* Enable the shared-key authentication. */ | |
1523 | err = hermes_write_wordrec(hw, USER_BAP, | |
1524 | HERMES_RID_CNFAUTHENTICATION_AGERE, | |
1525 | auth_flag); | |
1526 | } | |
1527 | err = hermes_write_wordrec(hw, USER_BAP, | |
1528 | HERMES_RID_CNFWEPENABLED_AGERE, | |
1529 | priv->wep_on); | |
1530 | if (err) | |
1531 | return err; | |
1532 | break; | |
1533 | ||
1534 | case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ | |
1535 | case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ | |
1536 | if (priv->wep_on) { | |
1537 | if (priv->wep_restrict || | |
1538 | (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) | |
1539 | master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | | |
1540 | HERMES_WEP_EXCL_UNENCRYPTED; | |
1541 | else | |
1542 | master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; | |
1543 | ||
1544 | err = hermes_write_wordrec(hw, USER_BAP, | |
1545 | HERMES_RID_CNFAUTHENTICATION, | |
1546 | auth_flag); | |
1547 | if (err) | |
1548 | return err; | |
1549 | } else | |
1550 | master_wep_flag = 0; | |
1551 | ||
1552 | if (priv->iw_mode == IW_MODE_MONITOR) | |
1553 | master_wep_flag |= HERMES_WEP_HOST_DECRYPT; | |
1554 | ||
1555 | /* Master WEP setting : on/off */ | |
1556 | err = hermes_write_wordrec(hw, USER_BAP, | |
1557 | HERMES_RID_CNFWEPFLAGS_INTERSIL, | |
1558 | master_wep_flag); | |
1559 | if (err) | |
1560 | return err; | |
1561 | ||
1562 | break; | |
1563 | } | |
1564 | ||
1565 | return 0; | |
1566 | } | |
1567 | ||
1568 | static int __orinoco_program_rids(struct net_device *dev) | |
1569 | { | |
1570 | struct orinoco_private *priv = netdev_priv(dev); | |
1571 | hermes_t *hw = &priv->hw; | |
1572 | int err; | |
1573 | struct hermes_idstring idbuf; | |
1574 | ||
1575 | /* Set the MAC address */ | |
1576 | err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, | |
1577 | HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); | |
1578 | if (err) { | |
1579 | printk(KERN_ERR "%s: Error %d setting MAC address\n", | |
1580 | dev->name, err); | |
1581 | return err; | |
1582 | } | |
1583 | ||
1584 | /* Set up the link mode */ | |
1585 | err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, | |
1586 | priv->port_type); | |
1587 | if (err) { | |
1588 | printk(KERN_ERR "%s: Error %d setting port type\n", | |
1589 | dev->name, err); | |
1590 | return err; | |
1591 | } | |
1592 | /* Set the channel/frequency */ | |
d51d8b1f DG |
1593 | if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) { |
1594 | err = hermes_write_wordrec(hw, USER_BAP, | |
1595 | HERMES_RID_CNFOWNCHANNEL, | |
1596 | priv->channel); | |
1597 | if (err) { | |
1598 | printk(KERN_ERR "%s: Error %d setting channel %d\n", | |
1599 | dev->name, err, priv->channel); | |
1600 | return err; | |
1601 | } | |
1da177e4 LT |
1602 | } |
1603 | ||
1604 | if (priv->has_ibss) { | |
1605 | u16 createibss; | |
1606 | ||
1607 | if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { | |
1608 | printk(KERN_WARNING "%s: This firmware requires an " | |
1609 | "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); | |
1610 | /* With wvlan_cs, in this case, we would crash. | |
1611 | * hopefully, this driver will behave better... | |
1612 | * Jean II */ | |
1613 | createibss = 0; | |
1614 | } else { | |
1615 | createibss = priv->createibss; | |
1616 | } | |
1617 | ||
1618 | err = hermes_write_wordrec(hw, USER_BAP, | |
1619 | HERMES_RID_CNFCREATEIBSS, | |
1620 | createibss); | |
1621 | if (err) { | |
1622 | printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", | |
1623 | dev->name, err); | |
1624 | return err; | |
1625 | } | |
1626 | } | |
1627 | ||
16739b06 CH |
1628 | /* Set the desired BSSID */ |
1629 | err = __orinoco_hw_set_wap(priv); | |
1630 | if (err) { | |
1631 | printk(KERN_ERR "%s: Error %d setting AP address\n", | |
1632 | dev->name, err); | |
1633 | return err; | |
1634 | } | |
1da177e4 LT |
1635 | /* Set the desired ESSID */ |
1636 | idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); | |
1637 | memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); | |
1638 | /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ | |
1639 | err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, | |
1640 | HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), | |
1641 | &idbuf); | |
1642 | if (err) { | |
1643 | printk(KERN_ERR "%s: Error %d setting OWNSSID\n", | |
1644 | dev->name, err); | |
1645 | return err; | |
1646 | } | |
1647 | err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, | |
1648 | HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), | |
1649 | &idbuf); | |
1650 | if (err) { | |
1651 | printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", | |
1652 | dev->name, err); | |
1653 | return err; | |
1654 | } | |
1655 | ||
1656 | /* Set the station name */ | |
1657 | idbuf.len = cpu_to_le16(strlen(priv->nick)); | |
1658 | memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); | |
1659 | err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, | |
1660 | HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), | |
1661 | &idbuf); | |
1662 | if (err) { | |
1663 | printk(KERN_ERR "%s: Error %d setting nickname\n", | |
1664 | dev->name, err); | |
1665 | return err; | |
1666 | } | |
1667 | ||
1668 | /* Set AP density */ | |
1669 | if (priv->has_sensitivity) { | |
1670 | err = hermes_write_wordrec(hw, USER_BAP, | |
1671 | HERMES_RID_CNFSYSTEMSCALE, | |
1672 | priv->ap_density); | |
1673 | if (err) { | |
1674 | printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " | |
1675 | "Disabling sensitivity control\n", | |
1676 | dev->name, err); | |
1677 | ||
1678 | priv->has_sensitivity = 0; | |
1679 | } | |
1680 | } | |
1681 | ||
1682 | /* Set RTS threshold */ | |
1683 | err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, | |
1684 | priv->rts_thresh); | |
1685 | if (err) { | |
1686 | printk(KERN_ERR "%s: Error %d setting RTS threshold\n", | |
1687 | dev->name, err); | |
1688 | return err; | |
1689 | } | |
1690 | ||
1691 | /* Set fragmentation threshold or MWO robustness */ | |
1692 | if (priv->has_mwo) | |
1693 | err = hermes_write_wordrec(hw, USER_BAP, | |
1694 | HERMES_RID_CNFMWOROBUST_AGERE, | |
1695 | priv->mwo_robust); | |
1696 | else | |
1697 | err = hermes_write_wordrec(hw, USER_BAP, | |
1698 | HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, | |
1699 | priv->frag_thresh); | |
1700 | if (err) { | |
1701 | printk(KERN_ERR "%s: Error %d setting fragmentation\n", | |
1702 | dev->name, err); | |
1703 | return err; | |
1704 | } | |
1705 | ||
1706 | /* Set bitrate */ | |
1707 | err = __orinoco_hw_set_bitrate(priv); | |
1708 | if (err) { | |
1709 | printk(KERN_ERR "%s: Error %d setting bitrate\n", | |
1710 | dev->name, err); | |
1711 | return err; | |
1712 | } | |
1713 | ||
1714 | /* Set power management */ | |
1715 | if (priv->has_pm) { | |
1716 | err = hermes_write_wordrec(hw, USER_BAP, | |
1717 | HERMES_RID_CNFPMENABLED, | |
1718 | priv->pm_on); | |
1719 | if (err) { | |
1720 | printk(KERN_ERR "%s: Error %d setting up PM\n", | |
1721 | dev->name, err); | |
1722 | return err; | |
1723 | } | |
1724 | ||
1725 | err = hermes_write_wordrec(hw, USER_BAP, | |
1726 | HERMES_RID_CNFMULTICASTRECEIVE, | |
1727 | priv->pm_mcast); | |
1728 | if (err) { | |
1729 | printk(KERN_ERR "%s: Error %d setting up PM\n", | |
1730 | dev->name, err); | |
1731 | return err; | |
1732 | } | |
1733 | err = hermes_write_wordrec(hw, USER_BAP, | |
1734 | HERMES_RID_CNFMAXSLEEPDURATION, | |
1735 | priv->pm_period); | |
1736 | if (err) { | |
1737 | printk(KERN_ERR "%s: Error %d setting up PM\n", | |
1738 | dev->name, err); | |
1739 | return err; | |
1740 | } | |
1741 | err = hermes_write_wordrec(hw, USER_BAP, | |
1742 | HERMES_RID_CNFPMHOLDOVERDURATION, | |
1743 | priv->pm_timeout); | |
1744 | if (err) { | |
1745 | printk(KERN_ERR "%s: Error %d setting up PM\n", | |
1746 | dev->name, err); | |
1747 | return err; | |
1748 | } | |
1749 | } | |
1750 | ||
1751 | /* Set preamble - only for Symbol so far... */ | |
1752 | if (priv->has_preamble) { | |
1753 | err = hermes_write_wordrec(hw, USER_BAP, | |
1754 | HERMES_RID_CNFPREAMBLE_SYMBOL, | |
1755 | priv->preamble); | |
1756 | if (err) { | |
1757 | printk(KERN_ERR "%s: Error %d setting preamble\n", | |
1758 | dev->name, err); | |
1759 | return err; | |
1760 | } | |
1761 | } | |
1762 | ||
1763 | /* Set up encryption */ | |
1764 | if (priv->has_wep) { | |
1765 | err = __orinoco_hw_setup_wep(priv); | |
1766 | if (err) { | |
1767 | printk(KERN_ERR "%s: Error %d activating WEP\n", | |
1768 | dev->name, err); | |
1769 | return err; | |
1770 | } | |
1771 | } | |
1772 | ||
98c4cae1 CH |
1773 | if (priv->iw_mode == IW_MODE_MONITOR) { |
1774 | /* Enable monitor mode */ | |
1775 | dev->type = ARPHRD_IEEE80211; | |
1776 | err = hermes_docmd_wait(hw, HERMES_CMD_TEST | | |
1777 | HERMES_TEST_MONITOR, 0, NULL); | |
1778 | } else { | |
1779 | /* Disable monitor mode */ | |
1780 | dev->type = ARPHRD_ETHER; | |
1781 | err = hermes_docmd_wait(hw, HERMES_CMD_TEST | | |
1782 | HERMES_TEST_STOP, 0, NULL); | |
1783 | } | |
1784 | if (err) | |
1785 | return err; | |
1786 | ||
1da177e4 LT |
1787 | /* Set promiscuity / multicast*/ |
1788 | priv->promiscuous = 0; | |
1789 | priv->mc_count = 0; | |
932ff279 HX |
1790 | |
1791 | /* FIXME: what about netif_tx_lock */ | |
1792 | __orinoco_set_multicast_list(dev); | |
1da177e4 LT |
1793 | |
1794 | return 0; | |
1795 | } | |
1796 | ||
1797 | /* FIXME: return int? */ | |
1798 | static void | |
1799 | __orinoco_set_multicast_list(struct net_device *dev) | |
1800 | { | |
1801 | struct orinoco_private *priv = netdev_priv(dev); | |
1802 | hermes_t *hw = &priv->hw; | |
1803 | int err = 0; | |
1804 | int promisc, mc_count; | |
1805 | ||
1806 | /* The Hermes doesn't seem to have an allmulti mode, so we go | |
1807 | * into promiscuous mode and let the upper levels deal. */ | |
1808 | if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || | |
1809 | (dev->mc_count > MAX_MULTICAST(priv)) ) { | |
1810 | promisc = 1; | |
1811 | mc_count = 0; | |
1812 | } else { | |
1813 | promisc = 0; | |
1814 | mc_count = dev->mc_count; | |
1815 | } | |
1816 | ||
1817 | if (promisc != priv->promiscuous) { | |
1818 | err = hermes_write_wordrec(hw, USER_BAP, | |
1819 | HERMES_RID_CNFPROMISCUOUSMODE, | |
1820 | promisc); | |
1821 | if (err) { | |
1822 | printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", | |
1823 | dev->name, err); | |
1824 | } else | |
1825 | priv->promiscuous = promisc; | |
1826 | } | |
1827 | ||
1828 | if (! promisc && (mc_count || priv->mc_count) ) { | |
1829 | struct dev_mc_list *p = dev->mc_list; | |
1830 | struct hermes_multicast mclist; | |
1831 | int i; | |
1832 | ||
1833 | for (i = 0; i < mc_count; i++) { | |
1834 | /* paranoia: is list shorter than mc_count? */ | |
1835 | BUG_ON(! p); | |
1836 | /* paranoia: bad address size in list? */ | |
1837 | BUG_ON(p->dmi_addrlen != ETH_ALEN); | |
1838 | ||
1839 | memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN); | |
1840 | p = p->next; | |
1841 | } | |
1842 | ||
1843 | if (p) | |
1844 | printk(KERN_WARNING "%s: Multicast list is " | |
1845 | "longer than mc_count\n", dev->name); | |
1846 | ||
1847 | err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES, | |
1848 | HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN), | |
1849 | &mclist); | |
1850 | if (err) | |
1851 | printk(KERN_ERR "%s: Error %d setting multicast list.\n", | |
1852 | dev->name, err); | |
1853 | else | |
1854 | priv->mc_count = mc_count; | |
1855 | } | |
1856 | ||
1857 | /* Since we can set the promiscuous flag when it wasn't asked | |
1858 | for, make sure the net_device knows about it. */ | |
1859 | if (priv->promiscuous) | |
1860 | dev->flags |= IFF_PROMISC; | |
1861 | else | |
1862 | dev->flags &= ~IFF_PROMISC; | |
1863 | } | |
1864 | ||
1da177e4 LT |
1865 | /* This must be called from user context, without locks held - use |
1866 | * schedule_work() */ | |
1867 | static void orinoco_reset(struct net_device *dev) | |
1868 | { | |
1869 | struct orinoco_private *priv = netdev_priv(dev); | |
1870 | struct hermes *hw = &priv->hw; | |
8551cb98 | 1871 | int err; |
1da177e4 LT |
1872 | unsigned long flags; |
1873 | ||
1874 | if (orinoco_lock(priv, &flags) != 0) | |
1875 | /* When the hardware becomes available again, whatever | |
1876 | * detects that is responsible for re-initializing | |
1877 | * it. So no need for anything further */ | |
1878 | return; | |
1879 | ||
1880 | netif_stop_queue(dev); | |
1881 | ||
1882 | /* Shut off interrupts. Depending on what state the hardware | |
1883 | * is in, this might not work, but we'll try anyway */ | |
1884 | hermes_set_irqmask(hw, 0); | |
1885 | hermes_write_regn(hw, EVACK, 0xffff); | |
1886 | ||
1887 | priv->hw_unavailable++; | |
1888 | priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ | |
1889 | netif_carrier_off(dev); | |
1890 | ||
1891 | orinoco_unlock(priv, &flags); | |
1892 | ||
95dd91fb CH |
1893 | /* Scanning support: Cleanup of driver struct */ |
1894 | kfree(priv->scan_result); | |
1895 | priv->scan_result = NULL; | |
1896 | priv->scan_inprogress = 0; | |
1897 | ||
8551cb98 | 1898 | if (priv->hard_reset) { |
1da177e4 | 1899 | err = (*priv->hard_reset)(priv); |
8551cb98 CH |
1900 | if (err) { |
1901 | printk(KERN_ERR "%s: orinoco_reset: Error %d " | |
1902 | "performing hard reset\n", dev->name, err); | |
1903 | goto disable; | |
1904 | } | |
1da177e4 LT |
1905 | } |
1906 | ||
1907 | err = orinoco_reinit_firmware(dev); | |
1908 | if (err) { | |
1909 | printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", | |
1910 | dev->name, err); | |
8551cb98 | 1911 | goto disable; |
1da177e4 LT |
1912 | } |
1913 | ||
1914 | spin_lock_irq(&priv->lock); /* This has to be called from user context */ | |
1915 | ||
1916 | priv->hw_unavailable--; | |
1917 | ||
1918 | /* priv->open or priv->hw_unavailable might have changed while | |
1919 | * we dropped the lock */ | |
1920 | if (priv->open && (! priv->hw_unavailable)) { | |
1921 | err = __orinoco_up(dev); | |
1922 | if (err) { | |
1923 | printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", | |
1924 | dev->name, err); | |
1925 | } else | |
1926 | dev->trans_start = jiffies; | |
1927 | } | |
1928 | ||
1929 | spin_unlock_irq(&priv->lock); | |
1930 | ||
1931 | return; | |
8551cb98 CH |
1932 | disable: |
1933 | hermes_set_irqmask(hw, 0); | |
1934 | netif_device_detach(dev); | |
1935 | printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); | |
1da177e4 LT |
1936 | } |
1937 | ||
1938 | /********************************************************************/ | |
1939 | /* Interrupt handler */ | |
1940 | /********************************************************************/ | |
1941 | ||
1942 | static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw) | |
1943 | { | |
1944 | printk(KERN_DEBUG "%s: TICK\n", dev->name); | |
1945 | } | |
1946 | ||
1947 | static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw) | |
1948 | { | |
1949 | /* This seems to happen a fair bit under load, but ignoring it | |
1950 | seems to work fine...*/ | |
1951 | printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", | |
1952 | dev->name); | |
1953 | } | |
1954 | ||
1955 | irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs) | |
1956 | { | |
1957 | struct net_device *dev = (struct net_device *)dev_id; | |
1958 | struct orinoco_private *priv = netdev_priv(dev); | |
1959 | hermes_t *hw = &priv->hw; | |
1960 | int count = MAX_IRQLOOPS_PER_IRQ; | |
1961 | u16 evstat, events; | |
1962 | /* These are used to detect a runaway interrupt situation */ | |
1963 | /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, | |
1964 | * we panic and shut down the hardware */ | |
1965 | static int last_irq_jiffy = 0; /* jiffies value the last time | |
1966 | * we were called */ | |
1967 | static int loops_this_jiffy = 0; | |
1968 | unsigned long flags; | |
1969 | ||
1970 | if (orinoco_lock(priv, &flags) != 0) { | |
1971 | /* If hw is unavailable - we don't know if the irq was | |
1972 | * for us or not */ | |
1973 | return IRQ_HANDLED; | |
1974 | } | |
1975 | ||
1976 | evstat = hermes_read_regn(hw, EVSTAT); | |
1977 | events = evstat & hw->inten; | |
1978 | if (! events) { | |
1979 | orinoco_unlock(priv, &flags); | |
1980 | return IRQ_NONE; | |
1981 | } | |
1982 | ||
1983 | if (jiffies != last_irq_jiffy) | |
1984 | loops_this_jiffy = 0; | |
1985 | last_irq_jiffy = jiffies; | |
1986 | ||
1987 | while (events && count--) { | |
1988 | if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { | |
1989 | printk(KERN_WARNING "%s: IRQ handler is looping too " | |
1990 | "much! Resetting.\n", dev->name); | |
1991 | /* Disable interrupts for now */ | |
1992 | hermes_set_irqmask(hw, 0); | |
1993 | schedule_work(&priv->reset_work); | |
1994 | break; | |
1995 | } | |
1996 | ||
1997 | /* Check the card hasn't been removed */ | |
1998 | if (! hermes_present(hw)) { | |
1999 | DEBUG(0, "orinoco_interrupt(): card removed\n"); | |
2000 | break; | |
2001 | } | |
2002 | ||
2003 | if (events & HERMES_EV_TICK) | |
2004 | __orinoco_ev_tick(dev, hw); | |
2005 | if (events & HERMES_EV_WTERR) | |
2006 | __orinoco_ev_wterr(dev, hw); | |
2007 | if (events & HERMES_EV_INFDROP) | |
2008 | __orinoco_ev_infdrop(dev, hw); | |
2009 | if (events & HERMES_EV_INFO) | |
2010 | __orinoco_ev_info(dev, hw); | |
2011 | if (events & HERMES_EV_RX) | |
2012 | __orinoco_ev_rx(dev, hw); | |
2013 | if (events & HERMES_EV_TXEXC) | |
2014 | __orinoco_ev_txexc(dev, hw); | |
2015 | if (events & HERMES_EV_TX) | |
2016 | __orinoco_ev_tx(dev, hw); | |
2017 | if (events & HERMES_EV_ALLOC) | |
2018 | __orinoco_ev_alloc(dev, hw); | |
2019 | ||
84d8a2fb | 2020 | hermes_write_regn(hw, EVACK, evstat); |
1da177e4 LT |
2021 | |
2022 | evstat = hermes_read_regn(hw, EVSTAT); | |
2023 | events = evstat & hw->inten; | |
2024 | }; | |
2025 | ||
2026 | orinoco_unlock(priv, &flags); | |
2027 | return IRQ_HANDLED; | |
2028 | } | |
2029 | ||
2030 | /********************************************************************/ | |
2031 | /* Initialization */ | |
2032 | /********************************************************************/ | |
2033 | ||
2034 | struct comp_id { | |
2035 | u16 id, variant, major, minor; | |
2036 | } __attribute__ ((packed)); | |
2037 | ||
2038 | static inline fwtype_t determine_firmware_type(struct comp_id *nic_id) | |
2039 | { | |
2040 | if (nic_id->id < 0x8000) | |
2041 | return FIRMWARE_TYPE_AGERE; | |
2042 | else if (nic_id->id == 0x8000 && nic_id->major == 0) | |
2043 | return FIRMWARE_TYPE_SYMBOL; | |
2044 | else | |
2045 | return FIRMWARE_TYPE_INTERSIL; | |
2046 | } | |
2047 | ||
2048 | /* Set priv->firmware type, determine firmware properties */ | |
2049 | static int determine_firmware(struct net_device *dev) | |
2050 | { | |
2051 | struct orinoco_private *priv = netdev_priv(dev); | |
2052 | hermes_t *hw = &priv->hw; | |
2053 | int err; | |
2054 | struct comp_id nic_id, sta_id; | |
2055 | unsigned int firmver; | |
2056 | char tmp[SYMBOL_MAX_VER_LEN+1]; | |
2057 | ||
2058 | /* Get the hardware version */ | |
2059 | err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); | |
2060 | if (err) { | |
2061 | printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n", | |
2062 | dev->name, err); | |
2063 | return err; | |
2064 | } | |
2065 | ||
2066 | le16_to_cpus(&nic_id.id); | |
2067 | le16_to_cpus(&nic_id.variant); | |
2068 | le16_to_cpus(&nic_id.major); | |
2069 | le16_to_cpus(&nic_id.minor); | |
2070 | printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n", | |
2071 | dev->name, nic_id.id, nic_id.variant, | |
2072 | nic_id.major, nic_id.minor); | |
2073 | ||
2074 | priv->firmware_type = determine_firmware_type(&nic_id); | |
2075 | ||
2076 | /* Get the firmware version */ | |
2077 | err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); | |
2078 | if (err) { | |
2079 | printk(KERN_ERR "%s: Cannot read station identity: error %d\n", | |
2080 | dev->name, err); | |
2081 | return err; | |
2082 | } | |
2083 | ||
2084 | le16_to_cpus(&sta_id.id); | |
2085 | le16_to_cpus(&sta_id.variant); | |
2086 | le16_to_cpus(&sta_id.major); | |
2087 | le16_to_cpus(&sta_id.minor); | |
2088 | printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n", | |
2089 | dev->name, sta_id.id, sta_id.variant, | |
2090 | sta_id.major, sta_id.minor); | |
2091 | ||
2092 | switch (sta_id.id) { | |
2093 | case 0x15: | |
2094 | printk(KERN_ERR "%s: Primary firmware is active\n", | |
2095 | dev->name); | |
2096 | return -ENODEV; | |
2097 | case 0x14b: | |
2098 | printk(KERN_ERR "%s: Tertiary firmware is active\n", | |
2099 | dev->name); | |
2100 | return -ENODEV; | |
2101 | case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ | |
2102 | case 0x21: /* Symbol Spectrum24 Trilogy */ | |
2103 | break; | |
2104 | default: | |
2105 | printk(KERN_NOTICE "%s: Unknown station ID, please report\n", | |
2106 | dev->name); | |
2107 | break; | |
2108 | } | |
2109 | ||
2110 | /* Default capabilities */ | |
2111 | priv->has_sensitivity = 1; | |
2112 | priv->has_mwo = 0; | |
2113 | priv->has_preamble = 0; | |
2114 | priv->has_port3 = 1; | |
2115 | priv->has_ibss = 1; | |
2116 | priv->has_wep = 0; | |
2117 | priv->has_big_wep = 0; | |
2118 | ||
2119 | /* Determine capabilities from the firmware version */ | |
2120 | switch (priv->firmware_type) { | |
2121 | case FIRMWARE_TYPE_AGERE: | |
2122 | /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, | |
2123 | ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ | |
2124 | snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, | |
2125 | "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor); | |
2126 | ||
2127 | firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; | |
2128 | ||
2129 | priv->has_ibss = (firmver >= 0x60006); | |
2130 | priv->has_wep = (firmver >= 0x40020); | |
2131 | priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell | |
2132 | Gold cards from the others? */ | |
2133 | priv->has_mwo = (firmver >= 0x60000); | |
2134 | priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ | |
2135 | priv->ibss_port = 1; | |
95dd91fb | 2136 | priv->has_hostscan = (firmver >= 0x8000a); |
98c4cae1 | 2137 | priv->broken_monitor = (firmver >= 0x80000); |
1da177e4 LT |
2138 | |
2139 | /* Tested with Agere firmware : | |
2140 | * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II | |
2141 | * Tested CableTron firmware : 4.32 => Anton */ | |
2142 | break; | |
2143 | case FIRMWARE_TYPE_SYMBOL: | |
2144 | /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ | |
2145 | /* Intel MAC : 00:02:B3:* */ | |
2146 | /* 3Com MAC : 00:50:DA:* */ | |
2147 | memset(tmp, 0, sizeof(tmp)); | |
2148 | /* Get the Symbol firmware version */ | |
2149 | err = hermes_read_ltv(hw, USER_BAP, | |
2150 | HERMES_RID_SECONDARYVERSION_SYMBOL, | |
2151 | SYMBOL_MAX_VER_LEN, NULL, &tmp); | |
2152 | if (err) { | |
2153 | printk(KERN_WARNING | |
2154 | "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n", | |
2155 | dev->name, err); | |
2156 | firmver = 0; | |
2157 | tmp[0] = '\0'; | |
2158 | } else { | |
2159 | /* The firmware revision is a string, the format is | |
2160 | * something like : "V2.20-01". | |
2161 | * Quick and dirty parsing... - Jean II | |
2162 | */ | |
2163 | firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12) | |
2164 | | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4) | |
2165 | | (tmp[7] - '0'); | |
2166 | ||
2167 | tmp[SYMBOL_MAX_VER_LEN] = '\0'; | |
2168 | } | |
2169 | ||
2170 | snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, | |
2171 | "Symbol %s", tmp); | |
2172 | ||
2173 | priv->has_ibss = (firmver >= 0x20000); | |
2174 | priv->has_wep = (firmver >= 0x15012); | |
2175 | priv->has_big_wep = (firmver >= 0x20000); | |
2176 | priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || | |
2177 | (firmver >= 0x29000 && firmver < 0x30000) || | |
2178 | firmver >= 0x31000; | |
2179 | priv->has_preamble = (firmver >= 0x20000); | |
2180 | priv->ibss_port = 4; | |
649e59e6 CH |
2181 | priv->broken_disableport = (firmver == 0x25013) || |
2182 | (firmver >= 0x30000 && firmver <= 0x31000); | |
95dd91fb CH |
2183 | priv->has_hostscan = (firmver >= 0x31001) || |
2184 | (firmver >= 0x29057 && firmver < 0x30000); | |
1da177e4 LT |
2185 | /* Tested with Intel firmware : 0x20015 => Jean II */ |
2186 | /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ | |
2187 | break; | |
2188 | case FIRMWARE_TYPE_INTERSIL: | |
2189 | /* D-Link, Linksys, Adtron, ZoomAir, and many others... | |
2190 | * Samsung, Compaq 100/200 and Proxim are slightly | |
2191 | * different and less well tested */ | |
2192 | /* D-Link MAC : 00:40:05:* */ | |
2193 | /* Addtron MAC : 00:90:D1:* */ | |
2194 | snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, | |
2195 | "Intersil %d.%d.%d", sta_id.major, sta_id.minor, | |
2196 | sta_id.variant); | |
2197 | ||
2198 | firmver = ((unsigned long)sta_id.major << 16) | | |
2199 | ((unsigned long)sta_id.minor << 8) | sta_id.variant; | |
2200 | ||
2201 | priv->has_ibss = (firmver >= 0x000700); /* FIXME */ | |
2202 | priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); | |
2203 | priv->has_pm = (firmver >= 0x000700); | |
95dd91fb | 2204 | priv->has_hostscan = (firmver >= 0x010301); |
1da177e4 LT |
2205 | |
2206 | if (firmver >= 0x000800) | |
2207 | priv->ibss_port = 0; | |
2208 | else { | |
2209 | printk(KERN_NOTICE "%s: Intersil firmware earlier " | |
2210 | "than v0.8.x - several features not supported\n", | |
2211 | dev->name); | |
2212 | priv->ibss_port = 1; | |
2213 | } | |
2214 | break; | |
2215 | } | |
2216 | printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name, | |
2217 | priv->fw_name); | |
2218 | ||
2219 | return 0; | |
2220 | } | |
2221 | ||
2222 | static int orinoco_init(struct net_device *dev) | |
2223 | { | |
2224 | struct orinoco_private *priv = netdev_priv(dev); | |
2225 | hermes_t *hw = &priv->hw; | |
2226 | int err = 0; | |
2227 | struct hermes_idstring nickbuf; | |
2228 | u16 reclen; | |
2229 | int len; | |
2230 | ||
1da177e4 LT |
2231 | /* No need to lock, the hw_unavailable flag is already set in |
2232 | * alloc_orinocodev() */ | |
b453872c | 2233 | priv->nicbuf_size = IEEE80211_FRAME_LEN + ETH_HLEN; |
1da177e4 LT |
2234 | |
2235 | /* Initialize the firmware */ | |
37a6c611 | 2236 | err = hermes_init(hw); |
1da177e4 LT |
2237 | if (err != 0) { |
2238 | printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", | |
2239 | dev->name, err); | |
2240 | goto out; | |
2241 | } | |
2242 | ||
2243 | err = determine_firmware(dev); | |
2244 | if (err != 0) { | |
2245 | printk(KERN_ERR "%s: Incompatible firmware, aborting\n", | |
2246 | dev->name); | |
2247 | goto out; | |
2248 | } | |
2249 | ||
2250 | if (priv->has_port3) | |
2251 | printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); | |
2252 | if (priv->has_ibss) | |
2253 | printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n", | |
2254 | dev->name); | |
2255 | if (priv->has_wep) { | |
2256 | printk(KERN_DEBUG "%s: WEP supported, ", dev->name); | |
2257 | if (priv->has_big_wep) | |
2258 | printk("104-bit key\n"); | |
2259 | else | |
2260 | printk("40-bit key\n"); | |
2261 | } | |
2262 | ||
2263 | /* Get the MAC address */ | |
2264 | err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, | |
2265 | ETH_ALEN, NULL, dev->dev_addr); | |
2266 | if (err) { | |
2267 | printk(KERN_WARNING "%s: failed to read MAC address!\n", | |
2268 | dev->name); | |
2269 | goto out; | |
2270 | } | |
2271 | ||
2272 | printk(KERN_DEBUG "%s: MAC address %02X:%02X:%02X:%02X:%02X:%02X\n", | |
2273 | dev->name, dev->dev_addr[0], dev->dev_addr[1], | |
2274 | dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4], | |
2275 | dev->dev_addr[5]); | |
2276 | ||
2277 | /* Get the station name */ | |
2278 | err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, | |
2279 | sizeof(nickbuf), &reclen, &nickbuf); | |
2280 | if (err) { | |
2281 | printk(KERN_ERR "%s: failed to read station name\n", | |
2282 | dev->name); | |
2283 | goto out; | |
2284 | } | |
2285 | if (nickbuf.len) | |
2286 | len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); | |
2287 | else | |
2288 | len = min(IW_ESSID_MAX_SIZE, 2 * reclen); | |
2289 | memcpy(priv->nick, &nickbuf.val, len); | |
2290 | priv->nick[len] = '\0'; | |
2291 | ||
2292 | printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick); | |
2293 | ||
37a6c611 PR |
2294 | err = orinoco_allocate_fid(dev); |
2295 | if (err) { | |
2296 | printk(KERN_ERR "%s: failed to allocate NIC buffer!\n", | |
2297 | dev->name); | |
2298 | goto out; | |
2299 | } | |
2300 | ||
1da177e4 LT |
2301 | /* Get allowed channels */ |
2302 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, | |
2303 | &priv->channel_mask); | |
2304 | if (err) { | |
2305 | printk(KERN_ERR "%s: failed to read channel list!\n", | |
2306 | dev->name); | |
2307 | goto out; | |
2308 | } | |
2309 | ||
2310 | /* Get initial AP density */ | |
2311 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, | |
2312 | &priv->ap_density); | |
2313 | if (err || priv->ap_density < 1 || priv->ap_density > 3) { | |
2314 | priv->has_sensitivity = 0; | |
2315 | } | |
2316 | ||
2317 | /* Get initial RTS threshold */ | |
2318 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, | |
2319 | &priv->rts_thresh); | |
2320 | if (err) { | |
2321 | printk(KERN_ERR "%s: failed to read RTS threshold!\n", | |
2322 | dev->name); | |
2323 | goto out; | |
2324 | } | |
2325 | ||
2326 | /* Get initial fragmentation settings */ | |
2327 | if (priv->has_mwo) | |
2328 | err = hermes_read_wordrec(hw, USER_BAP, | |
2329 | HERMES_RID_CNFMWOROBUST_AGERE, | |
2330 | &priv->mwo_robust); | |
2331 | else | |
2332 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, | |
2333 | &priv->frag_thresh); | |
2334 | if (err) { | |
2335 | printk(KERN_ERR "%s: failed to read fragmentation settings!\n", | |
2336 | dev->name); | |
2337 | goto out; | |
2338 | } | |
2339 | ||
2340 | /* Power management setup */ | |
2341 | if (priv->has_pm) { | |
2342 | priv->pm_on = 0; | |
2343 | priv->pm_mcast = 1; | |
2344 | err = hermes_read_wordrec(hw, USER_BAP, | |
2345 | HERMES_RID_CNFMAXSLEEPDURATION, | |
2346 | &priv->pm_period); | |
2347 | if (err) { | |
2348 | printk(KERN_ERR "%s: failed to read power management period!\n", | |
2349 | dev->name); | |
2350 | goto out; | |
2351 | } | |
2352 | err = hermes_read_wordrec(hw, USER_BAP, | |
2353 | HERMES_RID_CNFPMHOLDOVERDURATION, | |
2354 | &priv->pm_timeout); | |
2355 | if (err) { | |
2356 | printk(KERN_ERR "%s: failed to read power management timeout!\n", | |
2357 | dev->name); | |
2358 | goto out; | |
2359 | } | |
2360 | } | |
2361 | ||
2362 | /* Preamble setup */ | |
2363 | if (priv->has_preamble) { | |
2364 | err = hermes_read_wordrec(hw, USER_BAP, | |
2365 | HERMES_RID_CNFPREAMBLE_SYMBOL, | |
2366 | &priv->preamble); | |
2367 | if (err) | |
2368 | goto out; | |
2369 | } | |
2370 | ||
2371 | /* Set up the default configuration */ | |
2372 | priv->iw_mode = IW_MODE_INFRA; | |
2373 | /* By default use IEEE/IBSS ad-hoc mode if we have it */ | |
2374 | priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); | |
2375 | set_port_type(priv); | |
d51d8b1f | 2376 | priv->channel = 0; /* use firmware default */ |
1da177e4 LT |
2377 | |
2378 | priv->promiscuous = 0; | |
2379 | priv->wep_on = 0; | |
2380 | priv->tx_key = 0; | |
2381 | ||
1da177e4 LT |
2382 | /* Make the hardware available, as long as it hasn't been |
2383 | * removed elsewhere (e.g. by PCMCIA hot unplug) */ | |
2384 | spin_lock_irq(&priv->lock); | |
2385 | priv->hw_unavailable--; | |
2386 | spin_unlock_irq(&priv->lock); | |
2387 | ||
2388 | printk(KERN_DEBUG "%s: ready\n", dev->name); | |
2389 | ||
2390 | out: | |
1da177e4 LT |
2391 | return err; |
2392 | } | |
2393 | ||
2394 | struct net_device *alloc_orinocodev(int sizeof_card, | |
2395 | int (*hard_reset)(struct orinoco_private *)) | |
2396 | { | |
2397 | struct net_device *dev; | |
2398 | struct orinoco_private *priv; | |
2399 | ||
2400 | dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card); | |
2401 | if (! dev) | |
2402 | return NULL; | |
2403 | priv = netdev_priv(dev); | |
2404 | priv->ndev = dev; | |
2405 | if (sizeof_card) | |
84d8a2fb | 2406 | priv->card = (void *)((unsigned long)priv |
1da177e4 LT |
2407 | + sizeof(struct orinoco_private)); |
2408 | else | |
2409 | priv->card = NULL; | |
2410 | ||
2411 | /* Setup / override net_device fields */ | |
2412 | dev->init = orinoco_init; | |
2413 | dev->hard_start_xmit = orinoco_xmit; | |
2414 | dev->tx_timeout = orinoco_tx_timeout; | |
2415 | dev->watchdog_timeo = HZ; /* 1 second timeout */ | |
2416 | dev->get_stats = orinoco_get_stats; | |
1fab2e8b | 2417 | dev->ethtool_ops = &orinoco_ethtool_ops; |
620554e4 | 2418 | dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def; |
343c686c PR |
2419 | #ifdef WIRELESS_SPY |
2420 | priv->wireless_data.spy_data = &priv->spy_data; | |
2421 | dev->wireless_data = &priv->wireless_data; | |
2422 | #endif | |
1da177e4 LT |
2423 | dev->change_mtu = orinoco_change_mtu; |
2424 | dev->set_multicast_list = orinoco_set_multicast_list; | |
2425 | /* we use the default eth_mac_addr for setting the MAC addr */ | |
2426 | ||
2427 | /* Set up default callbacks */ | |
2428 | dev->open = orinoco_open; | |
2429 | dev->stop = orinoco_stop; | |
2430 | priv->hard_reset = hard_reset; | |
2431 | ||
2432 | spin_lock_init(&priv->lock); | |
2433 | priv->open = 0; | |
2434 | priv->hw_unavailable = 1; /* orinoco_init() must clear this | |
2435 | * before anything else touches the | |
2436 | * hardware */ | |
2437 | INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev); | |
16739b06 | 2438 | INIT_WORK(&priv->join_work, (void (*)(void *))orinoco_join_ap, dev); |
95dd91fb | 2439 | INIT_WORK(&priv->wevent_work, (void (*)(void *))orinoco_send_wevents, dev); |
1da177e4 LT |
2440 | |
2441 | netif_carrier_off(dev); | |
2442 | priv->last_linkstatus = 0xffff; | |
2443 | ||
2444 | return dev; | |
2445 | ||
2446 | } | |
2447 | ||
2448 | void free_orinocodev(struct net_device *dev) | |
2449 | { | |
95dd91fb CH |
2450 | struct orinoco_private *priv = netdev_priv(dev); |
2451 | ||
2452 | kfree(priv->scan_result); | |
1da177e4 LT |
2453 | free_netdev(dev); |
2454 | } | |
2455 | ||
2456 | /********************************************************************/ | |
2457 | /* Wireless extensions */ | |
2458 | /********************************************************************/ | |
2459 | ||
1da177e4 LT |
2460 | static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, |
2461 | char buf[IW_ESSID_MAX_SIZE+1]) | |
2462 | { | |
2463 | hermes_t *hw = &priv->hw; | |
2464 | int err = 0; | |
2465 | struct hermes_idstring essidbuf; | |
2466 | char *p = (char *)(&essidbuf.val); | |
2467 | int len; | |
2468 | unsigned long flags; | |
2469 | ||
2470 | if (orinoco_lock(priv, &flags) != 0) | |
2471 | return -EBUSY; | |
2472 | ||
2473 | if (strlen(priv->desired_essid) > 0) { | |
2474 | /* We read the desired SSID from the hardware rather | |
2475 | than from priv->desired_essid, just in case the | |
2476 | firmware is allowed to change it on us. I'm not | |
2477 | sure about this */ | |
2478 | /* My guess is that the OWNSSID should always be whatever | |
2479 | * we set to the card, whereas CURRENT_SSID is the one that | |
2480 | * may change... - Jean II */ | |
2481 | u16 rid; | |
2482 | ||
2483 | *active = 1; | |
2484 | ||
2485 | rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : | |
2486 | HERMES_RID_CNFDESIREDSSID; | |
2487 | ||
2488 | err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), | |
2489 | NULL, &essidbuf); | |
2490 | if (err) | |
2491 | goto fail_unlock; | |
2492 | } else { | |
2493 | *active = 0; | |
2494 | ||
2495 | err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, | |
2496 | sizeof(essidbuf), NULL, &essidbuf); | |
2497 | if (err) | |
2498 | goto fail_unlock; | |
2499 | } | |
2500 | ||
2501 | len = le16_to_cpu(essidbuf.len); | |
84d8a2fb | 2502 | BUG_ON(len > IW_ESSID_MAX_SIZE); |
1da177e4 LT |
2503 | |
2504 | memset(buf, 0, IW_ESSID_MAX_SIZE+1); | |
2505 | memcpy(buf, p, len); | |
2506 | buf[len] = '\0'; | |
2507 | ||
2508 | fail_unlock: | |
2509 | orinoco_unlock(priv, &flags); | |
2510 | ||
2511 | return err; | |
2512 | } | |
2513 | ||
2514 | static long orinoco_hw_get_freq(struct orinoco_private *priv) | |
2515 | { | |
2516 | ||
2517 | hermes_t *hw = &priv->hw; | |
2518 | int err = 0; | |
2519 | u16 channel; | |
2520 | long freq = 0; | |
2521 | unsigned long flags; | |
2522 | ||
2523 | if (orinoco_lock(priv, &flags) != 0) | |
2524 | return -EBUSY; | |
2525 | ||
2526 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel); | |
2527 | if (err) | |
2528 | goto out; | |
2529 | ||
2530 | /* Intersil firmware 1.3.5 returns 0 when the interface is down */ | |
2531 | if (channel == 0) { | |
2532 | err = -EBUSY; | |
2533 | goto out; | |
2534 | } | |
2535 | ||
2536 | if ( (channel < 1) || (channel > NUM_CHANNELS) ) { | |
2537 | printk(KERN_WARNING "%s: Channel out of range (%d)!\n", | |
2538 | priv->ndev->name, channel); | |
2539 | err = -EBUSY; | |
2540 | goto out; | |
2541 | ||
2542 | } | |
2543 | freq = channel_frequency[channel-1] * 100000; | |
2544 | ||
2545 | out: | |
2546 | orinoco_unlock(priv, &flags); | |
2547 | ||
2548 | if (err > 0) | |
2549 | err = -EBUSY; | |
2550 | return err ? err : freq; | |
2551 | } | |
2552 | ||
2553 | static int orinoco_hw_get_bitratelist(struct orinoco_private *priv, | |
2554 | int *numrates, s32 *rates, int max) | |
2555 | { | |
2556 | hermes_t *hw = &priv->hw; | |
2557 | struct hermes_idstring list; | |
2558 | unsigned char *p = (unsigned char *)&list.val; | |
2559 | int err = 0; | |
2560 | int num; | |
2561 | int i; | |
2562 | unsigned long flags; | |
2563 | ||
2564 | if (orinoco_lock(priv, &flags) != 0) | |
2565 | return -EBUSY; | |
2566 | ||
2567 | err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, | |
2568 | sizeof(list), NULL, &list); | |
2569 | orinoco_unlock(priv, &flags); | |
2570 | ||
2571 | if (err) | |
2572 | return err; | |
2573 | ||
2574 | num = le16_to_cpu(list.len); | |
2575 | *numrates = num; | |
2576 | num = min(num, max); | |
2577 | ||
2578 | for (i = 0; i < num; i++) { | |
2579 | rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ | |
2580 | } | |
2581 | ||
2582 | return 0; | |
2583 | } | |
2584 | ||
620554e4 CH |
2585 | static int orinoco_ioctl_getname(struct net_device *dev, |
2586 | struct iw_request_info *info, | |
2587 | char *name, | |
2588 | char *extra) | |
1da177e4 LT |
2589 | { |
2590 | struct orinoco_private *priv = netdev_priv(dev); | |
1da177e4 | 2591 | int numrates; |
620554e4 CH |
2592 | int err; |
2593 | ||
2594 | err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0); | |
2595 | ||
2596 | if (!err && (numrates > 2)) | |
2597 | strcpy(name, "IEEE 802.11b"); | |
2598 | else | |
2599 | strcpy(name, "IEEE 802.11-DS"); | |
2600 | ||
2601 | return 0; | |
2602 | } | |
2603 | ||
16739b06 CH |
2604 | static int orinoco_ioctl_setwap(struct net_device *dev, |
2605 | struct iw_request_info *info, | |
2606 | struct sockaddr *ap_addr, | |
2607 | char *extra) | |
2608 | { | |
2609 | struct orinoco_private *priv = netdev_priv(dev); | |
2610 | int err = -EINPROGRESS; /* Call commit handler */ | |
1da177e4 | 2611 | unsigned long flags; |
16739b06 CH |
2612 | static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
2613 | static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; | |
1da177e4 | 2614 | |
16739b06 CH |
2615 | if (orinoco_lock(priv, &flags) != 0) |
2616 | return -EBUSY; | |
2617 | ||
2618 | /* Enable automatic roaming - no sanity checks are needed */ | |
2619 | if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 || | |
2620 | memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) { | |
2621 | priv->bssid_fixed = 0; | |
2622 | memset(priv->desired_bssid, 0, ETH_ALEN); | |
2623 | ||
2624 | /* "off" means keep existing connection */ | |
2625 | if (ap_addr->sa_data[0] == 0) { | |
2626 | __orinoco_hw_set_wap(priv); | |
2627 | err = 0; | |
2628 | } | |
2629 | goto out; | |
2630 | } | |
2631 | ||
2632 | if (priv->firmware_type == FIRMWARE_TYPE_AGERE) { | |
2633 | printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't " | |
2634 | "support manual roaming\n", | |
2635 | dev->name); | |
2636 | err = -EOPNOTSUPP; | |
2637 | goto out; | |
2638 | } | |
2639 | ||
2640 | if (priv->iw_mode != IW_MODE_INFRA) { | |
2641 | printk(KERN_WARNING "%s: Manual roaming supported only in " | |
2642 | "managed mode\n", dev->name); | |
2643 | err = -EOPNOTSUPP; | |
2644 | goto out; | |
2645 | } | |
2646 | ||
2647 | /* Intersil firmware hangs without Desired ESSID */ | |
2648 | if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL && | |
2649 | strlen(priv->desired_essid) == 0) { | |
2650 | printk(KERN_WARNING "%s: Desired ESSID must be set for " | |
2651 | "manual roaming\n", dev->name); | |
2652 | err = -EOPNOTSUPP; | |
2653 | goto out; | |
2654 | } | |
2655 | ||
2656 | /* Finally, enable manual roaming */ | |
2657 | priv->bssid_fixed = 1; | |
2658 | memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN); | |
2659 | ||
2660 | out: | |
2661 | orinoco_unlock(priv, &flags); | |
2662 | return err; | |
2663 | } | |
2664 | ||
620554e4 CH |
2665 | static int orinoco_ioctl_getwap(struct net_device *dev, |
2666 | struct iw_request_info *info, | |
2667 | struct sockaddr *ap_addr, | |
2668 | char *extra) | |
2669 | { | |
2670 | struct orinoco_private *priv = netdev_priv(dev); | |
2671 | ||
2672 | hermes_t *hw = &priv->hw; | |
2673 | int err = 0; | |
1da177e4 LT |
2674 | unsigned long flags; |
2675 | ||
620554e4 CH |
2676 | if (orinoco_lock(priv, &flags) != 0) |
2677 | return -EBUSY; | |
1da177e4 | 2678 | |
620554e4 CH |
2679 | ap_addr->sa_family = ARPHRD_ETHER; |
2680 | err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, | |
2681 | ETH_ALEN, NULL, ap_addr->sa_data); | |
1da177e4 | 2682 | |
620554e4 CH |
2683 | orinoco_unlock(priv, &flags); |
2684 | ||
2685 | return err; | |
2686 | } | |
1da177e4 | 2687 | |
620554e4 CH |
2688 | static int orinoco_ioctl_setmode(struct net_device *dev, |
2689 | struct iw_request_info *info, | |
2690 | u32 *mode, | |
2691 | char *extra) | |
2692 | { | |
2693 | struct orinoco_private *priv = netdev_priv(dev); | |
2694 | int err = -EINPROGRESS; /* Call commit handler */ | |
2695 | unsigned long flags; | |
1da177e4 | 2696 | |
620554e4 CH |
2697 | if (priv->iw_mode == *mode) |
2698 | return 0; | |
1da177e4 LT |
2699 | |
2700 | if (orinoco_lock(priv, &flags) != 0) | |
2701 | return -EBUSY; | |
2702 | ||
620554e4 CH |
2703 | switch (*mode) { |
2704 | case IW_MODE_ADHOC: | |
2705 | if (!priv->has_ibss && !priv->has_port3) | |
2706 | err = -EOPNOTSUPP; | |
2707 | break; | |
2708 | ||
2709 | case IW_MODE_INFRA: | |
2710 | break; | |
2711 | ||
98c4cae1 CH |
2712 | case IW_MODE_MONITOR: |
2713 | if (priv->broken_monitor && !force_monitor) { | |
2714 | printk(KERN_WARNING "%s: Monitor mode support is " | |
2715 | "buggy in this firmware, not enabling\n", | |
2716 | dev->name); | |
2717 | err = -EOPNOTSUPP; | |
2718 | } | |
2719 | break; | |
2720 | ||
620554e4 CH |
2721 | default: |
2722 | err = -EOPNOTSUPP; | |
2723 | break; | |
2724 | } | |
2725 | ||
2726 | if (err == -EINPROGRESS) { | |
2727 | priv->iw_mode = *mode; | |
2728 | set_port_type(priv); | |
2729 | } | |
2730 | ||
1da177e4 LT |
2731 | orinoco_unlock(priv, &flags); |
2732 | ||
620554e4 CH |
2733 | return err; |
2734 | } | |
1da177e4 | 2735 | |
620554e4 CH |
2736 | static int orinoco_ioctl_getmode(struct net_device *dev, |
2737 | struct iw_request_info *info, | |
2738 | u32 *mode, | |
2739 | char *extra) | |
2740 | { | |
2741 | struct orinoco_private *priv = netdev_priv(dev); | |
1da177e4 | 2742 | |
620554e4 CH |
2743 | *mode = priv->iw_mode; |
2744 | return 0; | |
2745 | } | |
1da177e4 | 2746 | |
620554e4 CH |
2747 | static int orinoco_ioctl_getiwrange(struct net_device *dev, |
2748 | struct iw_request_info *info, | |
2749 | struct iw_point *rrq, | |
2750 | char *extra) | |
2751 | { | |
2752 | struct orinoco_private *priv = netdev_priv(dev); | |
2753 | int err = 0; | |
2754 | struct iw_range *range = (struct iw_range *) extra; | |
2755 | int numrates; | |
2756 | int i, k; | |
2757 | ||
620554e4 CH |
2758 | rrq->length = sizeof(struct iw_range); |
2759 | memset(range, 0, sizeof(struct iw_range)); | |
2760 | ||
2761 | range->we_version_compiled = WIRELESS_EXT; | |
2762 | range->we_version_source = 14; | |
1da177e4 LT |
2763 | |
2764 | /* Set available channels/frequencies */ | |
620554e4 | 2765 | range->num_channels = NUM_CHANNELS; |
1da177e4 LT |
2766 | k = 0; |
2767 | for (i = 0; i < NUM_CHANNELS; i++) { | |
2768 | if (priv->channel_mask & (1 << i)) { | |
620554e4 CH |
2769 | range->freq[k].i = i + 1; |
2770 | range->freq[k].m = channel_frequency[i] * 100000; | |
2771 | range->freq[k].e = 1; | |
1da177e4 LT |
2772 | k++; |
2773 | } | |
2774 | ||
2775 | if (k >= IW_MAX_FREQUENCIES) | |
2776 | break; | |
2777 | } | |
620554e4 CH |
2778 | range->num_frequency = k; |
2779 | range->sensitivity = 3; | |
1da177e4 | 2780 | |
620554e4 CH |
2781 | if (priv->has_wep) { |
2782 | range->max_encoding_tokens = ORINOCO_MAX_KEYS; | |
2783 | range->encoding_size[0] = SMALL_KEY_SIZE; | |
2784 | range->num_encoding_sizes = 1; | |
1da177e4 | 2785 | |
620554e4 CH |
2786 | if (priv->has_big_wep) { |
2787 | range->encoding_size[1] = LARGE_KEY_SIZE; | |
2788 | range->num_encoding_sizes = 2; | |
2789 | } | |
2790 | } | |
1da177e4 | 2791 | |
343c686c | 2792 | if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){ |
1da177e4 | 2793 | /* Quality stats meaningless in ad-hoc mode */ |
1da177e4 | 2794 | } else { |
620554e4 CH |
2795 | range->max_qual.qual = 0x8b - 0x2f; |
2796 | range->max_qual.level = 0x2f - 0x95 - 1; | |
2797 | range->max_qual.noise = 0x2f - 0x95 - 1; | |
1da177e4 | 2798 | /* Need to get better values */ |
620554e4 CH |
2799 | range->avg_qual.qual = 0x24; |
2800 | range->avg_qual.level = 0xC2; | |
2801 | range->avg_qual.noise = 0x9E; | |
1da177e4 LT |
2802 | } |
2803 | ||
2804 | err = orinoco_hw_get_bitratelist(priv, &numrates, | |
620554e4 | 2805 | range->bitrate, IW_MAX_BITRATES); |
1da177e4 LT |
2806 | if (err) |
2807 | return err; | |
620554e4 CH |
2808 | range->num_bitrates = numrates; |
2809 | ||
1da177e4 LT |
2810 | /* Set an indication of the max TCP throughput in bit/s that we can |
2811 | * expect using this interface. May be use for QoS stuff... | |
2812 | * Jean II */ | |
620554e4 CH |
2813 | if (numrates > 2) |
2814 | range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */ | |
1da177e4 | 2815 | else |
620554e4 CH |
2816 | range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */ |
2817 | ||
2818 | range->min_rts = 0; | |
2819 | range->max_rts = 2347; | |
2820 | range->min_frag = 256; | |
2821 | range->max_frag = 2346; | |
2822 | ||
2823 | range->min_pmp = 0; | |
2824 | range->max_pmp = 65535000; | |
2825 | range->min_pmt = 0; | |
2826 | range->max_pmt = 65535 * 1000; /* ??? */ | |
2827 | range->pmp_flags = IW_POWER_PERIOD; | |
2828 | range->pmt_flags = IW_POWER_TIMEOUT; | |
2829 | range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R; | |
2830 | ||
2831 | range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; | |
2832 | range->retry_flags = IW_RETRY_LIMIT; | |
2833 | range->r_time_flags = IW_RETRY_LIFETIME; | |
2834 | range->min_retry = 0; | |
2835 | range->max_retry = 65535; /* ??? */ | |
2836 | range->min_r_time = 0; | |
2837 | range->max_r_time = 65535 * 1000; /* ??? */ | |
1da177e4 | 2838 | |
343c686c PR |
2839 | /* Event capability (kernel) */ |
2840 | IW_EVENT_CAPA_SET_KERNEL(range->event_capa); | |
2841 | /* Event capability (driver) */ | |
2842 | IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY); | |
2843 | IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); | |
2844 | IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN); | |
2845 | IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP); | |
2846 | ||
1da177e4 LT |
2847 | return 0; |
2848 | } | |
2849 | ||
620554e4 CH |
2850 | static int orinoco_ioctl_setiwencode(struct net_device *dev, |
2851 | struct iw_request_info *info, | |
2852 | struct iw_point *erq, | |
2853 | char *keybuf) | |
1da177e4 LT |
2854 | { |
2855 | struct orinoco_private *priv = netdev_priv(dev); | |
2856 | int index = (erq->flags & IW_ENCODE_INDEX) - 1; | |
2857 | int setindex = priv->tx_key; | |
2858 | int enable = priv->wep_on; | |
2859 | int restricted = priv->wep_restrict; | |
2860 | u16 xlen = 0; | |
620554e4 | 2861 | int err = -EINPROGRESS; /* Call commit handler */ |
1da177e4 LT |
2862 | unsigned long flags; |
2863 | ||
2864 | if (! priv->has_wep) | |
2865 | return -EOPNOTSUPP; | |
2866 | ||
2867 | if (erq->pointer) { | |
2868 | /* We actually have a key to set - check its length */ | |
2869 | if (erq->length > LARGE_KEY_SIZE) | |
2870 | return -E2BIG; | |
2871 | ||
2872 | if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep ) | |
2873 | return -E2BIG; | |
1da177e4 LT |
2874 | } |
2875 | ||
2876 | if (orinoco_lock(priv, &flags) != 0) | |
2877 | return -EBUSY; | |
2878 | ||
fe397d46 | 2879 | if (erq->length > 0) { |
1da177e4 LT |
2880 | if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) |
2881 | index = priv->tx_key; | |
2882 | ||
2883 | /* Adjust key length to a supported value */ | |
2884 | if (erq->length > SMALL_KEY_SIZE) { | |
2885 | xlen = LARGE_KEY_SIZE; | |
2886 | } else if (erq->length > 0) { | |
2887 | xlen = SMALL_KEY_SIZE; | |
2888 | } else | |
2889 | xlen = 0; | |
2890 | ||
2891 | /* Switch on WEP if off */ | |
2892 | if ((!enable) && (xlen > 0)) { | |
2893 | setindex = index; | |
2894 | enable = 1; | |
2895 | } | |
2896 | } else { | |
2897 | /* Important note : if the user do "iwconfig eth0 enc off", | |
2898 | * we will arrive there with an index of -1. This is valid | |
2899 | * but need to be taken care off... Jean II */ | |
2900 | if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { | |
2901 | if((index != -1) || (erq->flags == 0)) { | |
2902 | err = -EINVAL; | |
2903 | goto out; | |
2904 | } | |
2905 | } else { | |
2906 | /* Set the index : Check that the key is valid */ | |
2907 | if(priv->keys[index].len == 0) { | |
2908 | err = -EINVAL; | |
2909 | goto out; | |
2910 | } | |
2911 | setindex = index; | |
2912 | } | |
2913 | } | |
2914 | ||
2915 | if (erq->flags & IW_ENCODE_DISABLED) | |
2916 | enable = 0; | |
2917 | if (erq->flags & IW_ENCODE_OPEN) | |
2918 | restricted = 0; | |
2919 | if (erq->flags & IW_ENCODE_RESTRICTED) | |
2920 | restricted = 1; | |
2921 | ||
fe397d46 | 2922 | if (erq->pointer && erq->length > 0) { |
1da177e4 LT |
2923 | priv->keys[index].len = cpu_to_le16(xlen); |
2924 | memset(priv->keys[index].data, 0, | |
2925 | sizeof(priv->keys[index].data)); | |
2926 | memcpy(priv->keys[index].data, keybuf, erq->length); | |
2927 | } | |
2928 | priv->tx_key = setindex; | |
2929 | ||
2930 | /* Try fast key change if connected and only keys are changed */ | |
2931 | if (priv->wep_on && enable && (priv->wep_restrict == restricted) && | |
2932 | netif_carrier_ok(dev)) { | |
2933 | err = __orinoco_hw_setup_wepkeys(priv); | |
2934 | /* No need to commit if successful */ | |
2935 | goto out; | |
2936 | } | |
2937 | ||
2938 | priv->wep_on = enable; | |
2939 | priv->wep_restrict = restricted; | |
2940 | ||
2941 | out: | |
2942 | orinoco_unlock(priv, &flags); | |
2943 | ||
2944 | return err; | |
2945 | } | |
2946 | ||
620554e4 CH |
2947 | static int orinoco_ioctl_getiwencode(struct net_device *dev, |
2948 | struct iw_request_info *info, | |
2949 | struct iw_point *erq, | |
2950 | char *keybuf) | |
1da177e4 LT |
2951 | { |
2952 | struct orinoco_private *priv = netdev_priv(dev); | |
2953 | int index = (erq->flags & IW_ENCODE_INDEX) - 1; | |
2954 | u16 xlen = 0; | |
1da177e4 LT |
2955 | unsigned long flags; |
2956 | ||
2957 | if (! priv->has_wep) | |
2958 | return -EOPNOTSUPP; | |
2959 | ||
2960 | if (orinoco_lock(priv, &flags) != 0) | |
2961 | return -EBUSY; | |
2962 | ||
2963 | if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) | |
2964 | index = priv->tx_key; | |
2965 | ||
2966 | erq->flags = 0; | |
2967 | if (! priv->wep_on) | |
2968 | erq->flags |= IW_ENCODE_DISABLED; | |
2969 | erq->flags |= index + 1; | |
2970 | ||
2971 | if (priv->wep_restrict) | |
2972 | erq->flags |= IW_ENCODE_RESTRICTED; | |
2973 | else | |
2974 | erq->flags |= IW_ENCODE_OPEN; | |
2975 | ||
2976 | xlen = le16_to_cpu(priv->keys[index].len); | |
2977 | ||
2978 | erq->length = xlen; | |
2979 | ||
2980 | memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE); | |
2981 | ||
2982 | orinoco_unlock(priv, &flags); | |
1da177e4 LT |
2983 | return 0; |
2984 | } | |
2985 | ||
620554e4 CH |
2986 | static int orinoco_ioctl_setessid(struct net_device *dev, |
2987 | struct iw_request_info *info, | |
2988 | struct iw_point *erq, | |
2989 | char *essidbuf) | |
1da177e4 LT |
2990 | { |
2991 | struct orinoco_private *priv = netdev_priv(dev); | |
1da177e4 LT |
2992 | unsigned long flags; |
2993 | ||
2994 | /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it | |
2995 | * anyway... - Jean II */ | |
2996 | ||
620554e4 CH |
2997 | /* Hum... Should not use Wireless Extension constant (may change), |
2998 | * should use our own... - Jean II */ | |
2999 | if (erq->length > IW_ESSID_MAX_SIZE) | |
3000 | return -E2BIG; | |
1da177e4 LT |
3001 | |
3002 | if (orinoco_lock(priv, &flags) != 0) | |
3003 | return -EBUSY; | |
3004 | ||
620554e4 CH |
3005 | /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */ |
3006 | memset(priv->desired_essid, 0, sizeof(priv->desired_essid)); | |
3007 | ||
3008 | /* If not ANY, get the new ESSID */ | |
3009 | if (erq->flags) { | |
3010 | memcpy(priv->desired_essid, essidbuf, erq->length); | |
3011 | } | |
1da177e4 LT |
3012 | |
3013 | orinoco_unlock(priv, &flags); | |
3014 | ||
620554e4 | 3015 | return -EINPROGRESS; /* Call commit handler */ |
1da177e4 LT |
3016 | } |
3017 | ||
620554e4 CH |
3018 | static int orinoco_ioctl_getessid(struct net_device *dev, |
3019 | struct iw_request_info *info, | |
3020 | struct iw_point *erq, | |
3021 | char *essidbuf) | |
1da177e4 LT |
3022 | { |
3023 | struct orinoco_private *priv = netdev_priv(dev); | |
1da177e4 LT |
3024 | int active; |
3025 | int err = 0; | |
3026 | unsigned long flags; | |
3027 | ||
1da177e4 LT |
3028 | if (netif_running(dev)) { |
3029 | err = orinoco_hw_get_essid(priv, &active, essidbuf); | |
3030 | if (err) | |
3031 | return err; | |
3032 | } else { | |
3033 | if (orinoco_lock(priv, &flags) != 0) | |
3034 | return -EBUSY; | |
620554e4 | 3035 | memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE + 1); |
1da177e4 LT |
3036 | orinoco_unlock(priv, &flags); |
3037 | } | |
3038 | ||
3039 | erq->flags = 1; | |
3040 | erq->length = strlen(essidbuf) + 1; | |
1da177e4 | 3041 | |
1da177e4 LT |
3042 | return 0; |
3043 | } | |
3044 | ||
620554e4 CH |
3045 | static int orinoco_ioctl_setnick(struct net_device *dev, |
3046 | struct iw_request_info *info, | |
3047 | struct iw_point *nrq, | |
3048 | char *nickbuf) | |
1da177e4 LT |
3049 | { |
3050 | struct orinoco_private *priv = netdev_priv(dev); | |
1da177e4 LT |
3051 | unsigned long flags; |
3052 | ||
3053 | if (nrq->length > IW_ESSID_MAX_SIZE) | |
3054 | return -E2BIG; | |
3055 | ||
1da177e4 LT |
3056 | if (orinoco_lock(priv, &flags) != 0) |
3057 | return -EBUSY; | |
3058 | ||
620554e4 CH |
3059 | memset(priv->nick, 0, sizeof(priv->nick)); |
3060 | memcpy(priv->nick, nickbuf, nrq->length); | |
1da177e4 LT |
3061 | |
3062 | orinoco_unlock(priv, &flags); | |
3063 | ||
620554e4 | 3064 | return -EINPROGRESS; /* Call commit handler */ |
1da177e4 LT |
3065 | } |
3066 | ||
620554e4 CH |
3067 | static int orinoco_ioctl_getnick(struct net_device *dev, |
3068 | struct iw_request_info *info, | |
3069 | struct iw_point *nrq, | |
3070 | char *nickbuf) | |
1da177e4 LT |
3071 | { |
3072 | struct orinoco_private *priv = netdev_priv(dev); | |
1da177e4 LT |
3073 | unsigned long flags; |
3074 | ||
3075 | if (orinoco_lock(priv, &flags) != 0) | |
3076 | return -EBUSY; | |
3077 | ||
3078 | memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE+1); | |
3079 | orinoco_unlock(priv, &flags); | |
3080 | ||
3081 | nrq->length = strlen(nickbuf)+1; | |
3082 | ||
1da177e4 LT |
3083 | return 0; |
3084 | } | |
3085 | ||
620554e4 CH |
3086 | static int orinoco_ioctl_setfreq(struct net_device *dev, |
3087 | struct iw_request_info *info, | |
3088 | struct iw_freq *frq, | |
3089 | char *extra) | |
1da177e4 LT |
3090 | { |
3091 | struct orinoco_private *priv = netdev_priv(dev); | |
3092 | int chan = -1; | |
3093 | unsigned long flags; | |
620554e4 | 3094 | int err = -EINPROGRESS; /* Call commit handler */ |
1da177e4 | 3095 | |
98c4cae1 CH |
3096 | /* In infrastructure mode the AP sets the channel */ |
3097 | if (priv->iw_mode == IW_MODE_INFRA) | |
3098 | return -EBUSY; | |
1da177e4 LT |
3099 | |
3100 | if ( (frq->e == 0) && (frq->m <= 1000) ) { | |
3101 | /* Setting by channel number */ | |
3102 | chan = frq->m; | |
3103 | } else { | |
3104 | /* Setting by frequency - search the table */ | |
3105 | int mult = 1; | |
3106 | int i; | |
3107 | ||
3108 | for (i = 0; i < (6 - frq->e); i++) | |
3109 | mult *= 10; | |
3110 | ||
3111 | for (i = 0; i < NUM_CHANNELS; i++) | |
3112 | if (frq->m == (channel_frequency[i] * mult)) | |
3113 | chan = i+1; | |
3114 | } | |
3115 | ||
3116 | if ( (chan < 1) || (chan > NUM_CHANNELS) || | |
3117 | ! (priv->channel_mask & (1 << (chan-1)) ) ) | |
3118 | return -EINVAL; | |
3119 | ||
3120 | if (orinoco_lock(priv, &flags) != 0) | |
3121 | return -EBUSY; | |
98c4cae1 | 3122 | |
1da177e4 | 3123 | priv->channel = chan; |
98c4cae1 CH |
3124 | if (priv->iw_mode == IW_MODE_MONITOR) { |
3125 | /* Fast channel change - no commit if successful */ | |
3126 | hermes_t *hw = &priv->hw; | |
3127 | err = hermes_docmd_wait(hw, HERMES_CMD_TEST | | |
3128 | HERMES_TEST_SET_CHANNEL, | |
3129 | chan, NULL); | |
3130 | } | |
1da177e4 LT |
3131 | orinoco_unlock(priv, &flags); |
3132 | ||
620554e4 CH |
3133 | return err; |
3134 | } | |
3135 | ||
3136 | static int orinoco_ioctl_getfreq(struct net_device *dev, | |
3137 | struct iw_request_info *info, | |
3138 | struct iw_freq *frq, | |
3139 | char *extra) | |
3140 | { | |
3141 | struct orinoco_private *priv = netdev_priv(dev); | |
3142 | int tmp; | |
3143 | ||
3144 | /* Locking done in there */ | |
3145 | tmp = orinoco_hw_get_freq(priv); | |
3146 | if (tmp < 0) { | |
3147 | return tmp; | |
3148 | } | |
3149 | ||
3150 | frq->m = tmp; | |
3151 | frq->e = 1; | |
3152 | ||
1da177e4 LT |
3153 | return 0; |
3154 | } | |
3155 | ||
620554e4 CH |
3156 | static int orinoco_ioctl_getsens(struct net_device *dev, |
3157 | struct iw_request_info *info, | |
3158 | struct iw_param *srq, | |
3159 | char *extra) | |
1da177e4 LT |
3160 | { |
3161 | struct orinoco_private *priv = netdev_priv(dev); | |
3162 | hermes_t *hw = &priv->hw; | |
3163 | u16 val; | |
3164 | int err; | |
3165 | unsigned long flags; | |
3166 | ||
3167 | if (!priv->has_sensitivity) | |
3168 | return -EOPNOTSUPP; | |
3169 | ||
3170 | if (orinoco_lock(priv, &flags) != 0) | |
3171 | return -EBUSY; | |
3172 | err = hermes_read_wordrec(hw, USER_BAP, | |
3173 | HERMES_RID_CNFSYSTEMSCALE, &val); | |
3174 | orinoco_unlock(priv, &flags); | |
3175 | ||
3176 | if (err) | |
3177 | return err; | |
3178 | ||
3179 | srq->value = val; | |
3180 | srq->fixed = 0; /* auto */ | |
3181 | ||
3182 | return 0; | |
3183 | } | |
3184 | ||
620554e4 CH |
3185 | static int orinoco_ioctl_setsens(struct net_device *dev, |
3186 | struct iw_request_info *info, | |
3187 | struct iw_param *srq, | |
3188 | char *extra) | |
1da177e4 LT |
3189 | { |
3190 | struct orinoco_private *priv = netdev_priv(dev); | |
3191 | int val = srq->value; | |
3192 | unsigned long flags; | |
3193 | ||
3194 | if (!priv->has_sensitivity) | |
3195 | return -EOPNOTSUPP; | |
3196 | ||
3197 | if ((val < 1) || (val > 3)) | |
3198 | return -EINVAL; | |
3199 | ||
3200 | if (orinoco_lock(priv, &flags) != 0) | |
3201 | return -EBUSY; | |
3202 | priv->ap_density = val; | |
3203 | orinoco_unlock(priv, &flags); | |
3204 | ||
620554e4 | 3205 | return -EINPROGRESS; /* Call commit handler */ |
1da177e4 LT |
3206 | } |
3207 | ||
620554e4 CH |
3208 | static int orinoco_ioctl_setrts(struct net_device *dev, |
3209 | struct iw_request_info *info, | |
3210 | struct iw_param *rrq, | |
3211 | char *extra) | |
1da177e4 LT |
3212 | { |
3213 | struct orinoco_private *priv = netdev_priv(dev); | |
3214 | int val = rrq->value; | |
3215 | unsigned long flags; | |
3216 | ||
3217 | if (rrq->disabled) | |
3218 | val = 2347; | |
3219 | ||
3220 | if ( (val < 0) || (val > 2347) ) | |
3221 | return -EINVAL; | |
3222 | ||
3223 | if (orinoco_lock(priv, &flags) != 0) | |
3224 | return -EBUSY; | |
3225 | ||
3226 | priv->rts_thresh = val; | |
3227 | orinoco_unlock(priv, &flags); | |
3228 | ||
620554e4 CH |
3229 | return -EINPROGRESS; /* Call commit handler */ |
3230 | } | |
3231 | ||
3232 | static int orinoco_ioctl_getrts(struct net_device *dev, | |
3233 | struct iw_request_info *info, | |
3234 | struct iw_param *rrq, | |
3235 | char *extra) | |
3236 | { | |
3237 | struct orinoco_private *priv = netdev_priv(dev); | |
3238 | ||
3239 | rrq->value = priv->rts_thresh; | |
3240 | rrq->disabled = (rrq->value == 2347); | |
3241 | rrq->fixed = 1; | |
3242 | ||
1da177e4 LT |
3243 | return 0; |
3244 | } | |
3245 | ||
620554e4 CH |
3246 | static int orinoco_ioctl_setfrag(struct net_device *dev, |
3247 | struct iw_request_info *info, | |
3248 | struct iw_param *frq, | |
3249 | char *extra) | |
1da177e4 LT |
3250 | { |
3251 | struct orinoco_private *priv = netdev_priv(dev); | |
620554e4 | 3252 | int err = -EINPROGRESS; /* Call commit handler */ |
1da177e4 LT |
3253 | unsigned long flags; |
3254 | ||
3255 | if (orinoco_lock(priv, &flags) != 0) | |
3256 | return -EBUSY; | |
3257 | ||
3258 | if (priv->has_mwo) { | |
3259 | if (frq->disabled) | |
3260 | priv->mwo_robust = 0; | |
3261 | else { | |
3262 | if (frq->fixed) | |
3263 | printk(KERN_WARNING "%s: Fixed fragmentation is " | |
3264 | "not supported on this firmware. " | |
3265 | "Using MWO robust instead.\n", dev->name); | |
3266 | priv->mwo_robust = 1; | |
3267 | } | |
3268 | } else { | |
3269 | if (frq->disabled) | |
3270 | priv->frag_thresh = 2346; | |
3271 | else { | |
3272 | if ( (frq->value < 256) || (frq->value > 2346) ) | |
3273 | err = -EINVAL; | |
3274 | else | |
3275 | priv->frag_thresh = frq->value & ~0x1; /* must be even */ | |
3276 | } | |
3277 | } | |
3278 | ||
3279 | orinoco_unlock(priv, &flags); | |
3280 | ||
3281 | return err; | |
3282 | } | |
3283 | ||
620554e4 CH |
3284 | static int orinoco_ioctl_getfrag(struct net_device *dev, |
3285 | struct iw_request_info *info, | |
3286 | struct iw_param *frq, | |
3287 | char *extra) | |
1da177e4 LT |
3288 | { |
3289 | struct orinoco_private *priv = netdev_priv(dev); | |
3290 | hermes_t *hw = &priv->hw; | |
620554e4 | 3291 | int err; |
1da177e4 LT |
3292 | u16 val; |
3293 | unsigned long flags; | |
3294 | ||
3295 | if (orinoco_lock(priv, &flags) != 0) | |
3296 | return -EBUSY; | |
3297 | ||
3298 | if (priv->has_mwo) { | |
3299 | err = hermes_read_wordrec(hw, USER_BAP, | |
3300 | HERMES_RID_CNFMWOROBUST_AGERE, | |
3301 | &val); | |
3302 | if (err) | |
3303 | val = 0; | |
3304 | ||
3305 | frq->value = val ? 2347 : 0; | |
3306 | frq->disabled = ! val; | |
3307 | frq->fixed = 0; | |
3308 | } else { | |
3309 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, | |
3310 | &val); | |
3311 | if (err) | |
3312 | val = 0; | |
3313 | ||
3314 | frq->value = val; | |
3315 | frq->disabled = (val >= 2346); | |
3316 | frq->fixed = 1; | |
3317 | } | |
3318 | ||
3319 | orinoco_unlock(priv, &flags); | |
3320 | ||
3321 | return err; | |
3322 | } | |
3323 | ||
620554e4 CH |
3324 | static int orinoco_ioctl_setrate(struct net_device *dev, |
3325 | struct iw_request_info *info, | |
3326 | struct iw_param *rrq, | |
3327 | char *extra) | |
1da177e4 LT |
3328 | { |
3329 | struct orinoco_private *priv = netdev_priv(dev); | |
1da177e4 LT |
3330 | int ratemode = -1; |
3331 | int bitrate; /* 100s of kilobits */ | |
3332 | int i; | |
3333 | unsigned long flags; | |
3334 | ||
3335 | /* As the user space doesn't know our highest rate, it uses -1 | |
3336 | * to ask us to set the highest rate. Test it using "iwconfig | |
3337 | * ethX rate auto" - Jean II */ | |
3338 | if (rrq->value == -1) | |
3339 | bitrate = 110; | |
3340 | else { | |
3341 | if (rrq->value % 100000) | |
3342 | return -EINVAL; | |
3343 | bitrate = rrq->value / 100000; | |
3344 | } | |
3345 | ||
3346 | if ( (bitrate != 10) && (bitrate != 20) && | |
3347 | (bitrate != 55) && (bitrate != 110) ) | |
3348 | return -EINVAL; | |
3349 | ||
3350 | for (i = 0; i < BITRATE_TABLE_SIZE; i++) | |
3351 | if ( (bitrate_table[i].bitrate == bitrate) && | |
3352 | (bitrate_table[i].automatic == ! rrq->fixed) ) { | |
3353 | ratemode = i; | |
3354 | break; | |
3355 | } | |
3356 | ||
3357 | if (ratemode == -1) | |
3358 | return -EINVAL; | |
3359 | ||
3360 | if (orinoco_lock(priv, &flags) != 0) | |
3361 | return -EBUSY; | |
3362 | priv->bitratemode = ratemode; | |
3363 | orinoco_unlock(priv, &flags); | |
3364 | ||
620554e4 | 3365 | return -EINPROGRESS; |
1da177e4 LT |
3366 | } |
3367 | ||
620554e4 CH |
3368 | static int orinoco_ioctl_getrate(struct net_device *dev, |
3369 | struct iw_request_info *info, | |
3370 | struct iw_param *rrq, | |
3371 | char *extra) | |
1da177e4 LT |
3372 | { |
3373 | struct orinoco_private *priv = netdev_priv(dev); | |
3374 | hermes_t *hw = &priv->hw; | |
3375 | int err = 0; | |
3376 | int ratemode; | |
3377 | int i; | |
3378 | u16 val; | |
3379 | unsigned long flags; | |
3380 | ||
3381 | if (orinoco_lock(priv, &flags) != 0) | |
3382 | return -EBUSY; | |
3383 | ||
3384 | ratemode = priv->bitratemode; | |
3385 | ||
3386 | BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); | |
3387 | ||
3388 | rrq->value = bitrate_table[ratemode].bitrate * 100000; | |
3389 | rrq->fixed = ! bitrate_table[ratemode].automatic; | |
3390 | rrq->disabled = 0; | |
3391 | ||
3392 | /* If the interface is running we try to find more about the | |
3393 | current mode */ | |
3394 | if (netif_running(dev)) { | |
3395 | err = hermes_read_wordrec(hw, USER_BAP, | |
3396 | HERMES_RID_CURRENTTXRATE, &val); | |
3397 | if (err) | |
3398 | goto out; | |
3399 | ||
3400 | switch (priv->firmware_type) { | |
3401 | case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ | |
3402 | /* Note : in Lucent firmware, the return value of | |
3403 | * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, | |
3404 | * and therefore is totally different from the | |
3405 | * encoding of HERMES_RID_CNFTXRATECONTROL. | |
3406 | * Don't forget that 6Mb/s is really 5.5Mb/s */ | |
3407 | if (val == 6) | |
3408 | rrq->value = 5500000; | |
3409 | else | |
3410 | rrq->value = val * 1000000; | |
3411 | break; | |
3412 | case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ | |
3413 | case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ | |
3414 | for (i = 0; i < BITRATE_TABLE_SIZE; i++) | |
3415 | if (bitrate_table[i].intersil_txratectrl == val) { | |
3416 | ratemode = i; | |
3417 | break; | |
3418 | } | |
3419 | if (i >= BITRATE_TABLE_SIZE) | |
3420 | printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", | |
3421 | dev->name, val); | |
3422 | ||
3423 | rrq->value = bitrate_table[ratemode].bitrate * 100000; | |
3424 | break; | |
3425 | default: | |
3426 | BUG(); | |
3427 | } | |
3428 | } | |
3429 | ||
3430 | out: | |
3431 | orinoco_unlock(priv, &flags); | |
3432 | ||
3433 | return err; | |
3434 | } | |
3435 | ||
620554e4 CH |
3436 | static int orinoco_ioctl_setpower(struct net_device *dev, |
3437 | struct iw_request_info *info, | |
3438 | struct iw_param *prq, | |
3439 | char *extra) | |
1da177e4 LT |
3440 | { |
3441 | struct orinoco_private *priv = netdev_priv(dev); | |
620554e4 | 3442 | int err = -EINPROGRESS; /* Call commit handler */ |
1da177e4 LT |
3443 | unsigned long flags; |
3444 | ||
3445 | if (orinoco_lock(priv, &flags) != 0) | |
3446 | return -EBUSY; | |
3447 | ||
3448 | if (prq->disabled) { | |
3449 | priv->pm_on = 0; | |
3450 | } else { | |
3451 | switch (prq->flags & IW_POWER_MODE) { | |
3452 | case IW_POWER_UNICAST_R: | |
3453 | priv->pm_mcast = 0; | |
3454 | priv->pm_on = 1; | |
3455 | break; | |
3456 | case IW_POWER_ALL_R: | |
3457 | priv->pm_mcast = 1; | |
3458 | priv->pm_on = 1; | |
3459 | break; | |
3460 | case IW_POWER_ON: | |
3461 | /* No flags : but we may have a value - Jean II */ | |
3462 | break; | |
3463 | default: | |
3464 | err = -EINVAL; | |
1da177e4 | 3465 | goto out; |
c08ad1e3 | 3466 | } |
1da177e4 LT |
3467 | |
3468 | if (prq->flags & IW_POWER_TIMEOUT) { | |
3469 | priv->pm_on = 1; | |
3470 | priv->pm_timeout = prq->value / 1000; | |
3471 | } | |
3472 | if (prq->flags & IW_POWER_PERIOD) { | |
3473 | priv->pm_on = 1; | |
3474 | priv->pm_period = prq->value / 1000; | |
3475 | } | |
3476 | /* It's valid to not have a value if we are just toggling | |
3477 | * the flags... Jean II */ | |
3478 | if(!priv->pm_on) { | |
3479 | err = -EINVAL; | |
3480 | goto out; | |
3481 | } | |
3482 | } | |
3483 | ||
3484 | out: | |
3485 | orinoco_unlock(priv, &flags); | |
3486 | ||
3487 | return err; | |
3488 | } | |
3489 | ||
620554e4 CH |
3490 | static int orinoco_ioctl_getpower(struct net_device *dev, |
3491 | struct iw_request_info *info, | |
3492 | struct iw_param *prq, | |
3493 | char *extra) | |
1da177e4 LT |
3494 | { |
3495 | struct orinoco_private *priv = netdev_priv(dev); | |
3496 | hermes_t *hw = &priv->hw; | |
3497 | int err = 0; | |
3498 | u16 enable, period, timeout, mcast; | |
3499 | unsigned long flags; | |
3500 | ||
3501 | if (orinoco_lock(priv, &flags) != 0) | |
3502 | return -EBUSY; | |
3503 | ||
3504 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable); | |
3505 | if (err) | |
3506 | goto out; | |
3507 | ||
3508 | err = hermes_read_wordrec(hw, USER_BAP, | |
3509 | HERMES_RID_CNFMAXSLEEPDURATION, &period); | |
3510 | if (err) | |
3511 | goto out; | |
3512 | ||
3513 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); | |
3514 | if (err) | |
3515 | goto out; | |
3516 | ||
3517 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast); | |
3518 | if (err) | |
3519 | goto out; | |
3520 | ||
3521 | prq->disabled = !enable; | |
3522 | /* Note : by default, display the period */ | |
3523 | if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { | |
3524 | prq->flags = IW_POWER_TIMEOUT; | |
3525 | prq->value = timeout * 1000; | |
3526 | } else { | |
3527 | prq->flags = IW_POWER_PERIOD; | |
3528 | prq->value = period * 1000; | |
3529 | } | |
3530 | if (mcast) | |
3531 | prq->flags |= IW_POWER_ALL_R; | |
3532 | else | |
3533 | prq->flags |= IW_POWER_UNICAST_R; | |
3534 | ||
3535 | out: | |
3536 | orinoco_unlock(priv, &flags); | |
3537 | ||
3538 | return err; | |
3539 | } | |
3540 | ||
620554e4 CH |
3541 | static int orinoco_ioctl_getretry(struct net_device *dev, |
3542 | struct iw_request_info *info, | |
3543 | struct iw_param *rrq, | |
3544 | char *extra) | |
1da177e4 LT |
3545 | { |
3546 | struct orinoco_private *priv = netdev_priv(dev); | |
3547 | hermes_t *hw = &priv->hw; | |
3548 | int err = 0; | |
3549 | u16 short_limit, long_limit, lifetime; | |
3550 | unsigned long flags; | |
3551 | ||
3552 | if (orinoco_lock(priv, &flags) != 0) | |
3553 | return -EBUSY; | |
3554 | ||
3555 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, | |
3556 | &short_limit); | |
3557 | if (err) | |
3558 | goto out; | |
3559 | ||
3560 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, | |
3561 | &long_limit); | |
3562 | if (err) | |
3563 | goto out; | |
3564 | ||
3565 | err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, | |
3566 | &lifetime); | |
3567 | if (err) | |
3568 | goto out; | |
3569 | ||
3570 | rrq->disabled = 0; /* Can't be disabled */ | |
3571 | ||
3572 | /* Note : by default, display the retry number */ | |
3573 | if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { | |
3574 | rrq->flags = IW_RETRY_LIFETIME; | |
3575 | rrq->value = lifetime * 1000; /* ??? */ | |
3576 | } else { | |
3577 | /* By default, display the min number */ | |
3578 | if ((rrq->flags & IW_RETRY_MAX)) { | |
3579 | rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; | |
3580 | rrq->value = long_limit; | |
3581 | } else { | |
3582 | rrq->flags = IW_RETRY_LIMIT; | |
3583 | rrq->value = short_limit; | |
3584 | if(short_limit != long_limit) | |
3585 | rrq->flags |= IW_RETRY_MIN; | |
3586 | } | |
3587 | } | |
3588 | ||
3589 | out: | |
3590 | orinoco_unlock(priv, &flags); | |
3591 | ||
3592 | return err; | |
3593 | } | |
3594 | ||
620554e4 CH |
3595 | static int orinoco_ioctl_reset(struct net_device *dev, |
3596 | struct iw_request_info *info, | |
3597 | void *wrqu, | |
3598 | char *extra) | |
3599 | { | |
3600 | struct orinoco_private *priv = netdev_priv(dev); | |
3601 | ||
3602 | if (! capable(CAP_NET_ADMIN)) | |
3603 | return -EPERM; | |
3604 | ||
3605 | if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) { | |
3606 | printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name); | |
3607 | ||
3608 | /* Firmware reset */ | |
3609 | orinoco_reset(dev); | |
3610 | } else { | |
3611 | printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); | |
3612 | ||
3613 | schedule_work(&priv->reset_work); | |
3614 | } | |
3615 | ||
3616 | return 0; | |
3617 | } | |
3618 | ||
3619 | static int orinoco_ioctl_setibssport(struct net_device *dev, | |
3620 | struct iw_request_info *info, | |
3621 | void *wrqu, | |
3622 | char *extra) | |
3623 | ||
1da177e4 LT |
3624 | { |
3625 | struct orinoco_private *priv = netdev_priv(dev); | |
620554e4 | 3626 | int val = *( (int *) extra ); |
1da177e4 LT |
3627 | unsigned long flags; |
3628 | ||
3629 | if (orinoco_lock(priv, &flags) != 0) | |
3630 | return -EBUSY; | |
3631 | ||
3632 | priv->ibss_port = val ; | |
3633 | ||
3634 | /* Actually update the mode we are using */ | |
3635 | set_port_type(priv); | |
3636 | ||
3637 | orinoco_unlock(priv, &flags); | |
620554e4 | 3638 | return -EINPROGRESS; /* Call commit handler */ |
1da177e4 LT |
3639 | } |
3640 | ||
620554e4 CH |
3641 | static int orinoco_ioctl_getibssport(struct net_device *dev, |
3642 | struct iw_request_info *info, | |
3643 | void *wrqu, | |
3644 | char *extra) | |
1da177e4 LT |
3645 | { |
3646 | struct orinoco_private *priv = netdev_priv(dev); | |
620554e4 | 3647 | int *val = (int *) extra; |
1da177e4 LT |
3648 | |
3649 | *val = priv->ibss_port; | |
1da177e4 LT |
3650 | return 0; |
3651 | } | |
3652 | ||
620554e4 CH |
3653 | static int orinoco_ioctl_setport3(struct net_device *dev, |
3654 | struct iw_request_info *info, | |
3655 | void *wrqu, | |
3656 | char *extra) | |
1da177e4 LT |
3657 | { |
3658 | struct orinoco_private *priv = netdev_priv(dev); | |
620554e4 | 3659 | int val = *( (int *) extra ); |
1da177e4 LT |
3660 | int err = 0; |
3661 | unsigned long flags; | |
3662 | ||
3663 | if (orinoco_lock(priv, &flags) != 0) | |
3664 | return -EBUSY; | |
3665 | ||
3666 | switch (val) { | |
3667 | case 0: /* Try to do IEEE ad-hoc mode */ | |
3668 | if (! priv->has_ibss) { | |
3669 | err = -EINVAL; | |
3670 | break; | |
3671 | } | |
3672 | priv->prefer_port3 = 0; | |
3673 | ||
3674 | break; | |
3675 | ||
3676 | case 1: /* Try to do Lucent proprietary ad-hoc mode */ | |
3677 | if (! priv->has_port3) { | |
3678 | err = -EINVAL; | |
3679 | break; | |
3680 | } | |
3681 | priv->prefer_port3 = 1; | |
3682 | break; | |
3683 | ||
3684 | default: | |
3685 | err = -EINVAL; | |
3686 | } | |
3687 | ||
620554e4 | 3688 | if (! err) { |
1da177e4 LT |
3689 | /* Actually update the mode we are using */ |
3690 | set_port_type(priv); | |
620554e4 CH |
3691 | err = -EINPROGRESS; |
3692 | } | |
1da177e4 LT |
3693 | |
3694 | orinoco_unlock(priv, &flags); | |
3695 | ||
3696 | return err; | |
3697 | } | |
3698 | ||
620554e4 CH |
3699 | static int orinoco_ioctl_getport3(struct net_device *dev, |
3700 | struct iw_request_info *info, | |
3701 | void *wrqu, | |
3702 | char *extra) | |
3703 | { | |
3704 | struct orinoco_private *priv = netdev_priv(dev); | |
3705 | int *val = (int *) extra; | |
3706 | ||
3707 | *val = priv->prefer_port3; | |
3708 | return 0; | |
3709 | } | |
3710 | ||
3711 | static int orinoco_ioctl_setpreamble(struct net_device *dev, | |
3712 | struct iw_request_info *info, | |
3713 | void *wrqu, | |
3714 | char *extra) | |
1da177e4 LT |
3715 | { |
3716 | struct orinoco_private *priv = netdev_priv(dev); | |
1da177e4 | 3717 | unsigned long flags; |
620554e4 CH |
3718 | int val; |
3719 | ||
3720 | if (! priv->has_preamble) | |
3721 | return -EOPNOTSUPP; | |
3722 | ||
3723 | /* 802.11b has recently defined some short preamble. | |
3724 | * Basically, the Phy header has been reduced in size. | |
3725 | * This increase performance, especially at high rates | |
3726 | * (the preamble is transmitted at 1Mb/s), unfortunately | |
3727 | * this give compatibility troubles... - Jean II */ | |
3728 | val = *( (int *) extra ); | |
1da177e4 LT |
3729 | |
3730 | if (orinoco_lock(priv, &flags) != 0) | |
3731 | return -EBUSY; | |
3732 | ||
620554e4 CH |
3733 | if (val) |
3734 | priv->preamble = 1; | |
3735 | else | |
3736 | priv->preamble = 0; | |
3737 | ||
1da177e4 | 3738 | orinoco_unlock(priv, &flags); |
620554e4 CH |
3739 | |
3740 | return -EINPROGRESS; /* Call commit handler */ | |
3741 | } | |
3742 | ||
3743 | static int orinoco_ioctl_getpreamble(struct net_device *dev, | |
3744 | struct iw_request_info *info, | |
3745 | void *wrqu, | |
3746 | char *extra) | |
3747 | { | |
3748 | struct orinoco_private *priv = netdev_priv(dev); | |
3749 | int *val = (int *) extra; | |
3750 | ||
3751 | if (! priv->has_preamble) | |
3752 | return -EOPNOTSUPP; | |
3753 | ||
3754 | *val = priv->preamble; | |
1da177e4 LT |
3755 | return 0; |
3756 | } | |
3757 | ||
620554e4 CH |
3758 | /* ioctl interface to hermes_read_ltv() |
3759 | * To use with iwpriv, pass the RID as the token argument, e.g. | |
3760 | * iwpriv get_rid [0xfc00] | |
3761 | * At least Wireless Tools 25 is required to use iwpriv. | |
3762 | * For Wireless Tools 25 and 26 append "dummy" are the end. */ | |
3763 | static int orinoco_ioctl_getrid(struct net_device *dev, | |
3764 | struct iw_request_info *info, | |
3765 | struct iw_point *data, | |
3766 | char *extra) | |
3767 | { | |
3768 | struct orinoco_private *priv = netdev_priv(dev); | |
3769 | hermes_t *hw = &priv->hw; | |
3770 | int rid = data->flags; | |
3771 | u16 length; | |
3772 | int err; | |
3773 | unsigned long flags; | |
3774 | ||
3775 | /* It's a "get" function, but we don't want users to access the | |
3776 | * WEP key and other raw firmware data */ | |
3777 | if (! capable(CAP_NET_ADMIN)) | |
3778 | return -EPERM; | |
3779 | ||
3780 | if (rid < 0xfc00 || rid > 0xffff) | |
3781 | return -EINVAL; | |
3782 | ||
3783 | if (orinoco_lock(priv, &flags) != 0) | |
3784 | return -EBUSY; | |
3785 | ||
3786 | err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, | |
3787 | extra); | |
3788 | if (err) | |
3789 | goto out; | |
3790 | ||
3791 | data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length), | |
3792 | MAX_RID_LEN); | |
3793 | ||
3794 | out: | |
3795 | orinoco_unlock(priv, &flags); | |
3796 | return err; | |
3797 | } | |
3798 | ||
95dd91fb CH |
3799 | /* Trigger a scan (look for other cells in the vicinity */ |
3800 | static int orinoco_ioctl_setscan(struct net_device *dev, | |
3801 | struct iw_request_info *info, | |
3802 | struct iw_param *srq, | |
3803 | char *extra) | |
1da177e4 LT |
3804 | { |
3805 | struct orinoco_private *priv = netdev_priv(dev); | |
95dd91fb | 3806 | hermes_t *hw = &priv->hw; |
1da177e4 | 3807 | int err = 0; |
1da177e4 LT |
3808 | unsigned long flags; |
3809 | ||
95dd91fb | 3810 | /* Note : you may have realised that, as this is a SET operation, |
7f927fcc | 3811 | * this is privileged and therefore a normal user can't |
95dd91fb CH |
3812 | * perform scanning. |
3813 | * This is not an error, while the device perform scanning, | |
3814 | * traffic doesn't flow, so it's a perfect DoS... | |
3815 | * Jean II */ | |
1da177e4 | 3816 | |
95dd91fb CH |
3817 | if (orinoco_lock(priv, &flags) != 0) |
3818 | return -EBUSY; | |
1da177e4 | 3819 | |
95dd91fb CH |
3820 | /* Scanning with port 0 disabled would fail */ |
3821 | if (!netif_running(dev)) { | |
3822 | err = -ENETDOWN; | |
3823 | goto out; | |
3824 | } | |
1da177e4 | 3825 | |
95dd91fb CH |
3826 | /* In monitor mode, the scan results are always empty. |
3827 | * Probe responses are passed to the driver as received | |
3828 | * frames and could be processed in software. */ | |
3829 | if (priv->iw_mode == IW_MODE_MONITOR) { | |
3830 | err = -EOPNOTSUPP; | |
3831 | goto out; | |
3832 | } | |
1da177e4 | 3833 | |
95dd91fb CH |
3834 | /* Note : because we don't lock out the irq handler, the way |
3835 | * we access scan variables in priv is critical. | |
3836 | * o scan_inprogress : not touched by irq handler | |
3837 | * o scan_mode : not touched by irq handler | |
3838 | * o scan_result : irq is strict producer, non-irq is strict | |
3839 | * consumer. | |
3840 | * o scan_len : synchronised with scan_result | |
3841 | * Before modifying anything on those variables, please think hard ! | |
3842 | * Jean II */ | |
1da177e4 | 3843 | |
95dd91fb CH |
3844 | /* If there is still some left-over scan results, get rid of it */ |
3845 | if (priv->scan_result != NULL) { | |
3846 | /* What's likely is that a client did crash or was killed | |
3847 | * between triggering the scan request and reading the | |
3848 | * results, so we need to reset everything. | |
3849 | * Some clients that are too slow may suffer from that... | |
3850 | * Jean II */ | |
3851 | kfree(priv->scan_result); | |
3852 | priv->scan_result = NULL; | |
3853 | } | |
1da177e4 | 3854 | |
95dd91fb CH |
3855 | /* Save flags */ |
3856 | priv->scan_mode = srq->flags; | |
1da177e4 | 3857 | |
95dd91fb CH |
3858 | /* Always trigger scanning, even if it's in progress. |
3859 | * This way, if the info frame get lost, we will recover somewhat | |
3860 | * gracefully - Jean II */ | |
1da177e4 | 3861 | |
95dd91fb CH |
3862 | if (priv->has_hostscan) { |
3863 | switch (priv->firmware_type) { | |
3864 | case FIRMWARE_TYPE_SYMBOL: | |
3865 | err = hermes_write_wordrec(hw, USER_BAP, | |
3866 | HERMES_RID_CNFHOSTSCAN_SYMBOL, | |
3867 | HERMES_HOSTSCAN_SYMBOL_ONCE | | |
3868 | HERMES_HOSTSCAN_SYMBOL_BCAST); | |
3869 | break; | |
3870 | case FIRMWARE_TYPE_INTERSIL: { | |
d133ae4c | 3871 | __le16 req[3]; |
95dd91fb CH |
3872 | |
3873 | req[0] = cpu_to_le16(0x3fff); /* All channels */ | |
3874 | req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ | |
3875 | req[2] = 0; /* Any ESSID */ | |
3876 | err = HERMES_WRITE_RECORD(hw, USER_BAP, | |
3877 | HERMES_RID_CNFHOSTSCAN, &req); | |
3878 | } | |
1da177e4 | 3879 | break; |
95dd91fb CH |
3880 | case FIRMWARE_TYPE_AGERE: |
3881 | err = hermes_write_wordrec(hw, USER_BAP, | |
3882 | HERMES_RID_CNFSCANSSID_AGERE, | |
3883 | 0); /* Any ESSID */ | |
3884 | if (err) | |
3885 | break; | |
1da177e4 | 3886 | |
95dd91fb | 3887 | err = hermes_inquire(hw, HERMES_INQ_SCAN); |
1da177e4 LT |
3888 | break; |
3889 | } | |
95dd91fb CH |
3890 | } else |
3891 | err = hermes_inquire(hw, HERMES_INQ_SCAN); | |
1da177e4 | 3892 | |
95dd91fb CH |
3893 | /* One more client */ |
3894 | if (! err) | |
3895 | priv->scan_inprogress = 1; | |
1da177e4 | 3896 | |
95dd91fb CH |
3897 | out: |
3898 | orinoco_unlock(priv, &flags); | |
3899 | return err; | |
3900 | } | |
1da177e4 | 3901 | |
95dd91fb | 3902 | /* Translate scan data returned from the card to a card independant |
70817c40 PR |
3903 | * format that the Wireless Tools will understand - Jean II |
3904 | * Return message length or -errno for fatal errors */ | |
95dd91fb CH |
3905 | static inline int orinoco_translate_scan(struct net_device *dev, |
3906 | char *buffer, | |
3907 | char *scan, | |
3908 | int scan_len) | |
3909 | { | |
3910 | struct orinoco_private *priv = netdev_priv(dev); | |
3911 | int offset; /* In the scan data */ | |
3912 | union hermes_scan_info *atom; | |
3913 | int atom_len; | |
3914 | u16 capabilities; | |
3915 | u16 channel; | |
3916 | struct iw_event iwe; /* Temporary buffer */ | |
3917 | char * current_ev = buffer; | |
3918 | char * end_buf = buffer + IW_SCAN_MAX_DATA; | |
1da177e4 | 3919 | |
95dd91fb CH |
3920 | switch (priv->firmware_type) { |
3921 | case FIRMWARE_TYPE_AGERE: | |
3922 | atom_len = sizeof(struct agere_scan_apinfo); | |
3923 | offset = 0; | |
1da177e4 | 3924 | break; |
95dd91fb CH |
3925 | case FIRMWARE_TYPE_SYMBOL: |
3926 | /* Lack of documentation necessitates this hack. | |
3927 | * Different firmwares have 68 or 76 byte long atoms. | |
3928 | * We try modulo first. If the length divides by both, | |
3929 | * we check what would be the channel in the second | |
3930 | * frame for a 68-byte atom. 76-byte atoms have 0 there. | |
3931 | * Valid channel cannot be 0. */ | |
3932 | if (scan_len % 76) | |
3933 | atom_len = 68; | |
3934 | else if (scan_len % 68) | |
3935 | atom_len = 76; | |
3936 | else if (scan_len >= 1292 && scan[68] == 0) | |
3937 | atom_len = 76; | |
3938 | else | |
3939 | atom_len = 68; | |
3940 | offset = 0; | |
1da177e4 | 3941 | break; |
95dd91fb CH |
3942 | case FIRMWARE_TYPE_INTERSIL: |
3943 | offset = 4; | |
70817c40 | 3944 | if (priv->has_hostscan) { |
d133ae4c | 3945 | atom_len = le16_to_cpup((__le16 *)scan); |
70817c40 PR |
3946 | /* Sanity check for atom_len */ |
3947 | if (atom_len < sizeof(struct prism2_scan_apinfo)) { | |
3948 | printk(KERN_ERR "%s: Invalid atom_len in scan data: %d\n", | |
3949 | dev->name, atom_len); | |
3950 | return -EIO; | |
3951 | } | |
3952 | } else | |
95dd91fb | 3953 | atom_len = offsetof(struct prism2_scan_apinfo, atim); |
1da177e4 | 3954 | break; |
95dd91fb | 3955 | default: |
70817c40 | 3956 | return -EOPNOTSUPP; |
95dd91fb | 3957 | } |
1da177e4 | 3958 | |
95dd91fb CH |
3959 | /* Check that we got an whole number of atoms */ |
3960 | if ((scan_len - offset) % atom_len) { | |
3961 | printk(KERN_ERR "%s: Unexpected scan data length %d, " | |
3962 | "atom_len %d, offset %d\n", dev->name, scan_len, | |
3963 | atom_len, offset); | |
70817c40 | 3964 | return -EIO; |
95dd91fb | 3965 | } |
1da177e4 | 3966 | |
95dd91fb CH |
3967 | /* Read the entries one by one */ |
3968 | for (; offset + atom_len <= scan_len; offset += atom_len) { | |
3969 | /* Get next atom */ | |
3970 | atom = (union hermes_scan_info *) (scan + offset); | |
3971 | ||
3972 | /* First entry *MUST* be the AP MAC address */ | |
3973 | iwe.cmd = SIOCGIWAP; | |
3974 | iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | |
3975 | memcpy(iwe.u.ap_addr.sa_data, atom->a.bssid, ETH_ALEN); | |
3976 | current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); | |
3977 | ||
3978 | /* Other entries will be displayed in the order we give them */ | |
3979 | ||
3980 | /* Add the ESSID */ | |
3981 | iwe.u.data.length = le16_to_cpu(atom->a.essid_len); | |
3982 | if (iwe.u.data.length > 32) | |
3983 | iwe.u.data.length = 32; | |
3984 | iwe.cmd = SIOCGIWESSID; | |
3985 | iwe.u.data.flags = 1; | |
3986 | current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid); | |
3987 | ||
3988 | /* Add mode */ | |
3989 | iwe.cmd = SIOCGIWMODE; | |
3990 | capabilities = le16_to_cpu(atom->a.capabilities); | |
3991 | if (capabilities & 0x3) { | |
3992 | if (capabilities & 0x1) | |
3993 | iwe.u.mode = IW_MODE_MASTER; | |
3994 | else | |
3995 | iwe.u.mode = IW_MODE_ADHOC; | |
3996 | current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); | |
3997 | } | |
1da177e4 | 3998 | |
95dd91fb CH |
3999 | channel = atom->s.channel; |
4000 | if ( (channel >= 1) && (channel <= NUM_CHANNELS) ) { | |
4001 | /* Add frequency */ | |
4002 | iwe.cmd = SIOCGIWFREQ; | |
4003 | iwe.u.freq.m = channel_frequency[channel-1] * 100000; | |
4004 | iwe.u.freq.e = 1; | |
4005 | current_ev = iwe_stream_add_event(current_ev, end_buf, | |
4006 | &iwe, IW_EV_FREQ_LEN); | |
4007 | } | |
1da177e4 | 4008 | |
95dd91fb CH |
4009 | /* Add quality statistics */ |
4010 | iwe.cmd = IWEVQUAL; | |
4011 | iwe.u.qual.updated = 0x10; /* no link quality */ | |
4012 | iwe.u.qual.level = (__u8) le16_to_cpu(atom->a.level) - 0x95; | |
4013 | iwe.u.qual.noise = (__u8) le16_to_cpu(atom->a.noise) - 0x95; | |
4014 | /* Wireless tools prior to 27.pre22 will show link quality | |
4015 | * anyway, so we provide a reasonable value. */ | |
4016 | if (iwe.u.qual.level > iwe.u.qual.noise) | |
4017 | iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; | |
4018 | else | |
4019 | iwe.u.qual.qual = 0; | |
4020 | current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); | |
1da177e4 | 4021 | |
95dd91fb CH |
4022 | /* Add encryption capability */ |
4023 | iwe.cmd = SIOCGIWENCODE; | |
4024 | if (capabilities & 0x10) | |
4025 | iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | |
4026 | else | |
4027 | iwe.u.data.flags = IW_ENCODE_DISABLED; | |
4028 | iwe.u.data.length = 0; | |
4029 | current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid); | |
4030 | ||
4031 | /* Bit rate is not available in Lucent/Agere firmwares */ | |
4032 | if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { | |
4033 | char * current_val = current_ev + IW_EV_LCP_LEN; | |
4034 | int i; | |
4035 | int step; | |
4036 | ||
4037 | if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL) | |
4038 | step = 2; | |
4039 | else | |
4040 | step = 1; | |
4041 | ||
4042 | iwe.cmd = SIOCGIWRATE; | |
4043 | /* Those two flags are ignored... */ | |
4044 | iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; | |
4045 | /* Max 10 values */ | |
4046 | for (i = 0; i < 10; i += step) { | |
4047 | /* NULL terminated */ | |
4048 | if (atom->p.rates[i] == 0x0) | |
4049 | break; | |
4050 | /* Bit rate given in 500 kb/s units (+ 0x80) */ | |
4051 | iwe.u.bitrate.value = ((atom->p.rates[i] & 0x7f) * 500000); | |
4052 | current_val = iwe_stream_add_value(current_ev, current_val, | |
4053 | end_buf, &iwe, | |
4054 | IW_EV_PARAM_LEN); | |
4055 | } | |
4056 | /* Check if we added any event */ | |
4057 | if ((current_val - current_ev) > IW_EV_LCP_LEN) | |
4058 | current_ev = current_val; | |
4059 | } | |
1da177e4 | 4060 | |
95dd91fb CH |
4061 | /* The other data in the scan result are not really |
4062 | * interesting, so for now drop it - Jean II */ | |
4063 | } | |
4064 | return current_ev - buffer; | |
4065 | } | |
1da177e4 | 4066 | |
95dd91fb CH |
4067 | /* Return results of a scan */ |
4068 | static int orinoco_ioctl_getscan(struct net_device *dev, | |
4069 | struct iw_request_info *info, | |
4070 | struct iw_point *srq, | |
4071 | char *extra) | |
4072 | { | |
4073 | struct orinoco_private *priv = netdev_priv(dev); | |
4074 | int err = 0; | |
4075 | unsigned long flags; | |
1da177e4 | 4076 | |
95dd91fb CH |
4077 | if (orinoco_lock(priv, &flags) != 0) |
4078 | return -EBUSY; | |
1da177e4 | 4079 | |
95dd91fb CH |
4080 | /* If no results yet, ask to try again later */ |
4081 | if (priv->scan_result == NULL) { | |
4082 | if (priv->scan_inprogress) | |
4083 | /* Important note : we don't want to block the caller | |
4084 | * until results are ready for various reasons. | |
4085 | * First, managing wait queues is complex and racy. | |
4086 | * Second, we grab some rtnetlink lock before comming | |
4087 | * here (in dev_ioctl()). | |
4088 | * Third, we generate an Wireless Event, so the | |
4089 | * caller can wait itself on that - Jean II */ | |
4090 | err = -EAGAIN; | |
4091 | else | |
4092 | /* Client error, no scan results... | |
4093 | * The caller need to restart the scan. */ | |
4094 | err = -ENODATA; | |
4095 | } else { | |
4096 | /* We have some results to push back to user space */ | |
4097 | ||
4098 | /* Translate to WE format */ | |
70817c40 PR |
4099 | int ret = orinoco_translate_scan(dev, extra, |
4100 | priv->scan_result, | |
4101 | priv->scan_len); | |
4102 | ||
4103 | if (ret < 0) { | |
4104 | err = ret; | |
4105 | kfree(priv->scan_result); | |
4106 | priv->scan_result = NULL; | |
4107 | } else { | |
4108 | srq->length = ret; | |
95dd91fb | 4109 | |
70817c40 PR |
4110 | /* Return flags */ |
4111 | srq->flags = (__u16) priv->scan_mode; | |
95dd91fb | 4112 | |
70817c40 PR |
4113 | /* In any case, Scan results will be cleaned up in the |
4114 | * reset function and when exiting the driver. | |
4115 | * The person triggering the scanning may never come to | |
4116 | * pick the results, so we need to do it in those places. | |
4117 | * Jean II */ | |
95dd91fb CH |
4118 | |
4119 | #ifdef SCAN_SINGLE_READ | |
70817c40 PR |
4120 | /* If you enable this option, only one client (the first |
4121 | * one) will be able to read the result (and only one | |
4122 | * time). If there is multiple concurent clients that | |
4123 | * want to read scan results, this behavior is not | |
4124 | * advisable - Jean II */ | |
4125 | kfree(priv->scan_result); | |
4126 | priv->scan_result = NULL; | |
95dd91fb | 4127 | #endif /* SCAN_SINGLE_READ */ |
70817c40 PR |
4128 | /* Here, if too much time has elapsed since last scan, |
4129 | * we may want to clean up scan results... - Jean II */ | |
4130 | } | |
4131 | ||
4132 | /* Scan is no longer in progress */ | |
4133 | priv->scan_inprogress = 0; | |
95dd91fb CH |
4134 | } |
4135 | ||
4136 | orinoco_unlock(priv, &flags); | |
4137 | return err; | |
4138 | } | |
1da177e4 | 4139 | |
620554e4 CH |
4140 | /* Commit handler, called after set operations */ |
4141 | static int orinoco_ioctl_commit(struct net_device *dev, | |
4142 | struct iw_request_info *info, | |
4143 | void *wrqu, | |
4144 | char *extra) | |
1da177e4 LT |
4145 | { |
4146 | struct orinoco_private *priv = netdev_priv(dev); | |
620554e4 | 4147 | struct hermes *hw = &priv->hw; |
1da177e4 | 4148 | unsigned long flags; |
620554e4 | 4149 | int err = 0; |
1da177e4 | 4150 | |
620554e4 CH |
4151 | if (!priv->open) |
4152 | return 0; | |
1da177e4 | 4153 | |
620554e4 CH |
4154 | if (priv->broken_disableport) { |
4155 | orinoco_reset(dev); | |
4156 | return 0; | |
4157 | } | |
1da177e4 | 4158 | |
620554e4 CH |
4159 | if (orinoco_lock(priv, &flags) != 0) |
4160 | return err; | |
1da177e4 | 4161 | |
620554e4 CH |
4162 | err = hermes_disable_port(hw, 0); |
4163 | if (err) { | |
4164 | printk(KERN_WARNING "%s: Unable to disable port " | |
4165 | "while reconfiguring card\n", dev->name); | |
4166 | priv->broken_disableport = 1; | |
4167 | goto out; | |
4168 | } | |
1da177e4 | 4169 | |
620554e4 CH |
4170 | err = __orinoco_program_rids(dev); |
4171 | if (err) { | |
4172 | printk(KERN_WARNING "%s: Unable to reconfigure card\n", | |
4173 | dev->name); | |
4174 | goto out; | |
4175 | } | |
1da177e4 | 4176 | |
620554e4 CH |
4177 | err = hermes_enable_port(hw, 0); |
4178 | if (err) { | |
4179 | printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", | |
4180 | dev->name); | |
4181 | goto out; | |
4182 | } | |
1da177e4 | 4183 | |
620554e4 CH |
4184 | out: |
4185 | if (err) { | |
4186 | printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); | |
1da177e4 | 4187 | schedule_work(&priv->reset_work); |
620554e4 CH |
4188 | err = 0; |
4189 | } | |
1da177e4 | 4190 | |
620554e4 CH |
4191 | orinoco_unlock(priv, &flags); |
4192 | return err; | |
4193 | } | |
1da177e4 | 4194 | |
620554e4 CH |
4195 | static const struct iw_priv_args orinoco_privtab[] = { |
4196 | { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, | |
4197 | { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, | |
4198 | { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | |
4199 | 0, "set_port3" }, | |
4200 | { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | |
4201 | "get_port3" }, | |
4202 | { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | |
4203 | 0, "set_preamble" }, | |
4204 | { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | |
4205 | "get_preamble" }, | |
4206 | { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | |
4207 | 0, "set_ibssport" }, | |
4208 | { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | |
4209 | "get_ibssport" }, | |
4210 | { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN, | |
4211 | "get_rid" }, | |
4212 | }; | |
1da177e4 | 4213 | |
1da177e4 | 4214 | |
620554e4 CH |
4215 | /* |
4216 | * Structures to export the Wireless Handlers | |
4217 | */ | |
1da177e4 | 4218 | |
620554e4 | 4219 | static const iw_handler orinoco_handler[] = { |
6b9b97ce PH |
4220 | [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_commit, |
4221 | [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getname, | |
4222 | [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfreq, | |
4223 | [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfreq, | |
4224 | [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setmode, | |
4225 | [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getmode, | |
4226 | [SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens, | |
4227 | [SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens, | |
4228 | [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange, | |
343c686c PR |
4229 | [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy, |
4230 | [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy, | |
4231 | [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy, | |
4232 | [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy, | |
6b9b97ce PH |
4233 | [SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap, |
4234 | [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap, | |
4235 | [SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan, | |
4236 | [SIOCGIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getscan, | |
4237 | [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setessid, | |
4238 | [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getessid, | |
4239 | [SIOCSIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setnick, | |
4240 | [SIOCGIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getnick, | |
4241 | [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrate, | |
4242 | [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrate, | |
4243 | [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrts, | |
4244 | [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrts, | |
4245 | [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfrag, | |
4246 | [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfrag, | |
4247 | [SIOCGIWRETRY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getretry, | |
4248 | [SIOCSIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setiwencode, | |
4249 | [SIOCGIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwencode, | |
4250 | [SIOCSIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setpower, | |
4251 | [SIOCGIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getpower, | |
620554e4 | 4252 | }; |
1da177e4 | 4253 | |
1da177e4 | 4254 | |
620554e4 CH |
4255 | /* |
4256 | Added typecasting since we no longer use iwreq_data -- Moustafa | |
4257 | */ | |
4258 | static const iw_handler orinoco_private_handler[] = { | |
6b9b97ce PH |
4259 | [0] = (iw_handler) orinoco_ioctl_reset, |
4260 | [1] = (iw_handler) orinoco_ioctl_reset, | |
4261 | [2] = (iw_handler) orinoco_ioctl_setport3, | |
4262 | [3] = (iw_handler) orinoco_ioctl_getport3, | |
4263 | [4] = (iw_handler) orinoco_ioctl_setpreamble, | |
4264 | [5] = (iw_handler) orinoco_ioctl_getpreamble, | |
4265 | [6] = (iw_handler) orinoco_ioctl_setibssport, | |
4266 | [7] = (iw_handler) orinoco_ioctl_getibssport, | |
4267 | [9] = (iw_handler) orinoco_ioctl_getrid, | |
620554e4 | 4268 | }; |
1da177e4 | 4269 | |
620554e4 CH |
4270 | static const struct iw_handler_def orinoco_handler_def = { |
4271 | .num_standard = ARRAY_SIZE(orinoco_handler), | |
4272 | .num_private = ARRAY_SIZE(orinoco_private_handler), | |
4273 | .num_private_args = ARRAY_SIZE(orinoco_privtab), | |
4274 | .standard = orinoco_handler, | |
4275 | .private = orinoco_private_handler, | |
4276 | .private_args = orinoco_privtab, | |
343c686c | 4277 | .get_wireless_stats = orinoco_get_wireless_stats, |
620554e4 | 4278 | }; |
1da177e4 | 4279 | |
1fab2e8b CH |
4280 | static void orinoco_get_drvinfo(struct net_device *dev, |
4281 | struct ethtool_drvinfo *info) | |
4282 | { | |
4283 | struct orinoco_private *priv = netdev_priv(dev); | |
1da177e4 | 4284 | |
1fab2e8b CH |
4285 | strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1); |
4286 | strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1); | |
4287 | strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1); | |
4288 | if (dev->class_dev.dev) | |
4289 | strncpy(info->bus_info, dev->class_dev.dev->bus_id, | |
4290 | sizeof(info->bus_info) - 1); | |
4291 | else | |
4292 | snprintf(info->bus_info, sizeof(info->bus_info) - 1, | |
4293 | "PCMCIA %p", priv->hw.iobase); | |
1da177e4 LT |
4294 | } |
4295 | ||
1fab2e8b CH |
4296 | static struct ethtool_ops orinoco_ethtool_ops = { |
4297 | .get_drvinfo = orinoco_get_drvinfo, | |
4298 | .get_link = ethtool_op_get_link, | |
4299 | }; | |
1da177e4 | 4300 | |
1da177e4 LT |
4301 | /********************************************************************/ |
4302 | /* Module initialization */ | |
4303 | /********************************************************************/ | |
4304 | ||
4305 | EXPORT_SYMBOL(alloc_orinocodev); | |
4306 | EXPORT_SYMBOL(free_orinocodev); | |
4307 | ||
4308 | EXPORT_SYMBOL(__orinoco_up); | |
4309 | EXPORT_SYMBOL(__orinoco_down); | |
1da177e4 LT |
4310 | EXPORT_SYMBOL(orinoco_reinit_firmware); |
4311 | ||
4312 | EXPORT_SYMBOL(orinoco_interrupt); | |
4313 | ||
4314 | /* Can't be declared "const" or the whole __initdata section will | |
4315 | * become const */ | |
4316 | static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION | |
4317 | " (David Gibson <hermes@gibson.dropbear.id.au>, " | |
4318 | "Pavel Roskin <proski@gnu.org>, et al)"; | |
4319 | ||
4320 | static int __init init_orinoco(void) | |
4321 | { | |
4322 | printk(KERN_DEBUG "%s\n", version); | |
4323 | return 0; | |
4324 | } | |
4325 | ||
4326 | static void __exit exit_orinoco(void) | |
4327 | { | |
4328 | } | |
4329 | ||
4330 | module_init(init_orinoco); | |
4331 | module_exit(exit_orinoco); |