]>
Commit | Line | Data |
---|---|---|
d53d9e67 ID |
1 | /* |
2 | Copyright (C) 2004 - 2009 rt2x00 SourceForge Project | |
3 | <http://rt2x00.serialmonkey.com> | |
4 | ||
5 | This program is free software; you can redistribute it and/or modify | |
6 | it under the terms of the GNU General Public License as published by | |
7 | the Free Software Foundation; either version 2 of the License, or | |
8 | (at your option) any later version. | |
9 | ||
10 | This program is distributed in the hope that it will be useful, | |
11 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | GNU General Public License for more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License | |
16 | along with this program; if not, write to the | |
17 | Free Software Foundation, Inc., | |
18 | 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
19 | */ | |
20 | ||
21 | /* | |
22 | Module: rt2800usb | |
23 | Abstract: rt2800usb device specific routines. | |
24 | Supported chipsets: RT2800U. | |
25 | */ | |
26 | ||
27 | #include <linux/crc-ccitt.h> | |
28 | #include <linux/delay.h> | |
29 | #include <linux/etherdevice.h> | |
30 | #include <linux/init.h> | |
31 | #include <linux/kernel.h> | |
32 | #include <linux/module.h> | |
33 | #include <linux/usb.h> | |
34 | ||
35 | #include "rt2x00.h" | |
36 | #include "rt2x00usb.h" | |
37 | #include "rt2800usb.h" | |
38 | ||
39 | /* | |
40 | * Allow hardware encryption to be disabled. | |
41 | */ | |
42 | static int modparam_nohwcrypt = 1; | |
43 | module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); | |
44 | MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); | |
45 | ||
46 | /* | |
47 | * Register access. | |
48 | * All access to the CSR registers will go through the methods | |
49 | * rt2x00usb_register_read and rt2x00usb_register_write. | |
50 | * BBP and RF register require indirect register access, | |
51 | * and use the CSR registers BBPCSR and RFCSR to achieve this. | |
52 | * These indirect registers work with busy bits, | |
53 | * and we will try maximal REGISTER_BUSY_COUNT times to access | |
54 | * the register while taking a REGISTER_BUSY_DELAY us delay | |
55 | * between each attampt. When the busy bit is still set at that time, | |
56 | * the access attempt is considered to have failed, | |
57 | * and we will print an error. | |
58 | * The _lock versions must be used if you already hold the csr_mutex | |
59 | */ | |
60 | #define WAIT_FOR_BBP(__dev, __reg) \ | |
61 | rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) | |
62 | #define WAIT_FOR_RFCSR(__dev, __reg) \ | |
63 | rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) | |
64 | #define WAIT_FOR_RF(__dev, __reg) \ | |
65 | rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) | |
66 | #define WAIT_FOR_MCU(__dev, __reg) \ | |
67 | rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \ | |
68 | H2M_MAILBOX_CSR_OWNER, (__reg)) | |
69 | ||
70 | static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev, | |
71 | const unsigned int word, const u8 value) | |
72 | { | |
73 | u32 reg; | |
74 | ||
75 | mutex_lock(&rt2x00dev->csr_mutex); | |
76 | ||
77 | /* | |
78 | * Wait until the BBP becomes available, afterwards we | |
79 | * can safely write the new data into the register. | |
80 | */ | |
81 | if (WAIT_FOR_BBP(rt2x00dev, ®)) { | |
82 | reg = 0; | |
83 | rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); | |
84 | rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); | |
85 | rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); | |
86 | rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); | |
87 | ||
88 | rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); | |
89 | } | |
90 | ||
91 | mutex_unlock(&rt2x00dev->csr_mutex); | |
92 | } | |
93 | ||
94 | static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev, | |
95 | const unsigned int word, u8 *value) | |
96 | { | |
97 | u32 reg; | |
98 | ||
99 | mutex_lock(&rt2x00dev->csr_mutex); | |
100 | ||
101 | /* | |
102 | * Wait until the BBP becomes available, afterwards we | |
103 | * can safely write the read request into the register. | |
104 | * After the data has been written, we wait until hardware | |
105 | * returns the correct value, if at any time the register | |
106 | * doesn't become available in time, reg will be 0xffffffff | |
107 | * which means we return 0xff to the caller. | |
108 | */ | |
109 | if (WAIT_FOR_BBP(rt2x00dev, ®)) { | |
110 | reg = 0; | |
111 | rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); | |
112 | rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); | |
113 | rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); | |
114 | ||
115 | rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); | |
116 | ||
117 | WAIT_FOR_BBP(rt2x00dev, ®); | |
118 | } | |
119 | ||
120 | *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); | |
121 | ||
122 | mutex_unlock(&rt2x00dev->csr_mutex); | |
123 | } | |
124 | ||
125 | static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev, | |
126 | const unsigned int word, const u8 value) | |
127 | { | |
128 | u32 reg; | |
129 | ||
130 | mutex_lock(&rt2x00dev->csr_mutex); | |
131 | ||
132 | /* | |
133 | * Wait until the RFCSR becomes available, afterwards we | |
134 | * can safely write the new data into the register. | |
135 | */ | |
136 | if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { | |
137 | reg = 0; | |
138 | rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); | |
139 | rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); | |
140 | rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); | |
141 | rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); | |
142 | ||
143 | rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); | |
144 | } | |
145 | ||
146 | mutex_unlock(&rt2x00dev->csr_mutex); | |
147 | } | |
148 | ||
149 | static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev, | |
150 | const unsigned int word, u8 *value) | |
151 | { | |
152 | u32 reg; | |
153 | ||
154 | mutex_lock(&rt2x00dev->csr_mutex); | |
155 | ||
156 | /* | |
157 | * Wait until the RFCSR becomes available, afterwards we | |
158 | * can safely write the read request into the register. | |
159 | * After the data has been written, we wait until hardware | |
160 | * returns the correct value, if at any time the register | |
161 | * doesn't become available in time, reg will be 0xffffffff | |
162 | * which means we return 0xff to the caller. | |
163 | */ | |
164 | if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { | |
165 | reg = 0; | |
166 | rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); | |
167 | rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); | |
168 | rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); | |
169 | ||
170 | rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); | |
171 | ||
172 | WAIT_FOR_RFCSR(rt2x00dev, ®); | |
173 | } | |
174 | ||
175 | *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); | |
176 | ||
177 | mutex_unlock(&rt2x00dev->csr_mutex); | |
178 | } | |
179 | ||
180 | static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev, | |
181 | const unsigned int word, const u32 value) | |
182 | { | |
183 | u32 reg; | |
184 | ||
185 | mutex_lock(&rt2x00dev->csr_mutex); | |
186 | ||
187 | /* | |
188 | * Wait until the RF becomes available, afterwards we | |
189 | * can safely write the new data into the register. | |
190 | */ | |
191 | if (WAIT_FOR_RF(rt2x00dev, ®)) { | |
192 | reg = 0; | |
193 | rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); | |
194 | rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); | |
195 | rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); | |
196 | rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); | |
197 | ||
198 | rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg); | |
199 | rt2x00_rf_write(rt2x00dev, word, value); | |
200 | } | |
201 | ||
202 | mutex_unlock(&rt2x00dev->csr_mutex); | |
203 | } | |
204 | ||
205 | static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev, | |
206 | const u8 command, const u8 token, | |
207 | const u8 arg0, const u8 arg1) | |
208 | { | |
209 | u32 reg; | |
210 | ||
211 | mutex_lock(&rt2x00dev->csr_mutex); | |
212 | ||
213 | /* | |
214 | * Wait until the MCU becomes available, afterwards we | |
215 | * can safely write the new data into the register. | |
216 | */ | |
217 | if (WAIT_FOR_MCU(rt2x00dev, ®)) { | |
218 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); | |
219 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); | |
220 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); | |
221 | rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); | |
222 | rt2x00usb_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg); | |
223 | ||
224 | reg = 0; | |
225 | rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); | |
226 | rt2x00usb_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg); | |
227 | } | |
228 | ||
229 | mutex_unlock(&rt2x00dev->csr_mutex); | |
230 | } | |
231 | ||
232 | #ifdef CONFIG_RT2X00_LIB_DEBUGFS | |
233 | static const struct rt2x00debug rt2800usb_rt2x00debug = { | |
234 | .owner = THIS_MODULE, | |
235 | .csr = { | |
236 | .read = rt2x00usb_register_read, | |
237 | .write = rt2x00usb_register_write, | |
238 | .flags = RT2X00DEBUGFS_OFFSET, | |
239 | .word_base = CSR_REG_BASE, | |
240 | .word_size = sizeof(u32), | |
241 | .word_count = CSR_REG_SIZE / sizeof(u32), | |
242 | }, | |
243 | .eeprom = { | |
244 | .read = rt2x00_eeprom_read, | |
245 | .write = rt2x00_eeprom_write, | |
246 | .word_base = EEPROM_BASE, | |
247 | .word_size = sizeof(u16), | |
248 | .word_count = EEPROM_SIZE / sizeof(u16), | |
249 | }, | |
250 | .bbp = { | |
251 | .read = rt2800usb_bbp_read, | |
252 | .write = rt2800usb_bbp_write, | |
253 | .word_base = BBP_BASE, | |
254 | .word_size = sizeof(u8), | |
255 | .word_count = BBP_SIZE / sizeof(u8), | |
256 | }, | |
257 | .rf = { | |
258 | .read = rt2x00_rf_read, | |
259 | .write = rt2800usb_rf_write, | |
260 | .word_base = RF_BASE, | |
261 | .word_size = sizeof(u32), | |
262 | .word_count = RF_SIZE / sizeof(u32), | |
263 | }, | |
264 | }; | |
265 | #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ | |
266 | ||
d53d9e67 ID |
267 | static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) |
268 | { | |
269 | u32 reg; | |
270 | ||
271 | rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); | |
272 | return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); | |
273 | } | |
d53d9e67 ID |
274 | |
275 | #ifdef CONFIG_RT2X00_LIB_LEDS | |
276 | static void rt2800usb_brightness_set(struct led_classdev *led_cdev, | |
277 | enum led_brightness brightness) | |
278 | { | |
279 | struct rt2x00_led *led = | |
280 | container_of(led_cdev, struct rt2x00_led, led_dev); | |
281 | unsigned int enabled = brightness != LED_OFF; | |
282 | unsigned int bg_mode = | |
283 | (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); | |
284 | unsigned int polarity = | |
285 | rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, | |
286 | EEPROM_FREQ_LED_POLARITY); | |
287 | unsigned int ledmode = | |
288 | rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, | |
289 | EEPROM_FREQ_LED_MODE); | |
290 | ||
291 | if (led->type == LED_TYPE_RADIO) { | |
292 | rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, | |
293 | enabled ? 0x20 : 0); | |
294 | } else if (led->type == LED_TYPE_ASSOC) { | |
295 | rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, | |
296 | enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); | |
297 | } else if (led->type == LED_TYPE_QUALITY) { | |
298 | /* | |
299 | * The brightness is divided into 6 levels (0 - 5), | |
300 | * The specs tell us the following levels: | |
301 | * 0, 1 ,3, 7, 15, 31 | |
302 | * to determine the level in a simple way we can simply | |
303 | * work with bitshifting: | |
304 | * (1 << level) - 1 | |
305 | */ | |
306 | rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, | |
307 | (1 << brightness / (LED_FULL / 6)) - 1, | |
308 | polarity); | |
309 | } | |
310 | } | |
311 | ||
312 | static int rt2800usb_blink_set(struct led_classdev *led_cdev, | |
313 | unsigned long *delay_on, | |
314 | unsigned long *delay_off) | |
315 | { | |
316 | struct rt2x00_led *led = | |
317 | container_of(led_cdev, struct rt2x00_led, led_dev); | |
318 | u32 reg; | |
319 | ||
320 | rt2x00usb_register_read(led->rt2x00dev, LED_CFG, ®); | |
321 | rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); | |
322 | rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); | |
323 | rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); | |
324 | rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); | |
325 | rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); | |
326 | rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); | |
327 | rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); | |
328 | rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg); | |
329 | ||
330 | return 0; | |
331 | } | |
332 | ||
333 | static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev, | |
334 | struct rt2x00_led *led, | |
335 | enum led_type type) | |
336 | { | |
337 | led->rt2x00dev = rt2x00dev; | |
338 | led->type = type; | |
339 | led->led_dev.brightness_set = rt2800usb_brightness_set; | |
340 | led->led_dev.blink_set = rt2800usb_blink_set; | |
341 | led->flags = LED_INITIALIZED; | |
342 | } | |
343 | #endif /* CONFIG_RT2X00_LIB_LEDS */ | |
344 | ||
345 | /* | |
346 | * Configuration handlers. | |
347 | */ | |
348 | static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev, | |
349 | struct rt2x00lib_crypto *crypto, | |
350 | struct ieee80211_key_conf *key) | |
351 | { | |
352 | struct mac_wcid_entry wcid_entry; | |
353 | struct mac_iveiv_entry iveiv_entry; | |
354 | u32 offset; | |
355 | u32 reg; | |
356 | ||
357 | offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); | |
358 | ||
359 | rt2x00usb_register_read(rt2x00dev, offset, ®); | |
360 | rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, | |
361 | !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); | |
362 | rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, | |
363 | (crypto->cmd == SET_KEY) * crypto->cipher); | |
364 | rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, | |
365 | (crypto->cmd == SET_KEY) * crypto->bssidx); | |
366 | rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); | |
367 | rt2x00usb_register_write(rt2x00dev, offset, reg); | |
368 | ||
369 | offset = MAC_IVEIV_ENTRY(key->hw_key_idx); | |
370 | ||
371 | memset(&iveiv_entry, 0, sizeof(iveiv_entry)); | |
372 | if ((crypto->cipher == CIPHER_TKIP) || | |
373 | (crypto->cipher == CIPHER_TKIP_NO_MIC) || | |
374 | (crypto->cipher == CIPHER_AES)) | |
375 | iveiv_entry.iv[3] |= 0x20; | |
376 | iveiv_entry.iv[3] |= key->keyidx << 6; | |
377 | rt2x00usb_register_multiwrite(rt2x00dev, offset, | |
378 | &iveiv_entry, sizeof(iveiv_entry)); | |
379 | ||
380 | offset = MAC_WCID_ENTRY(key->hw_key_idx); | |
381 | ||
382 | memset(&wcid_entry, 0, sizeof(wcid_entry)); | |
383 | if (crypto->cmd == SET_KEY) | |
384 | memcpy(&wcid_entry, crypto->address, ETH_ALEN); | |
385 | rt2x00usb_register_multiwrite(rt2x00dev, offset, | |
386 | &wcid_entry, sizeof(wcid_entry)); | |
387 | } | |
388 | ||
389 | static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev, | |
390 | struct rt2x00lib_crypto *crypto, | |
391 | struct ieee80211_key_conf *key) | |
392 | { | |
393 | struct hw_key_entry key_entry; | |
394 | struct rt2x00_field32 field; | |
395 | int timeout; | |
396 | u32 offset; | |
397 | u32 reg; | |
398 | ||
399 | if (crypto->cmd == SET_KEY) { | |
400 | key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; | |
401 | ||
402 | memcpy(key_entry.key, crypto->key, | |
403 | sizeof(key_entry.key)); | |
404 | memcpy(key_entry.tx_mic, crypto->tx_mic, | |
405 | sizeof(key_entry.tx_mic)); | |
406 | memcpy(key_entry.rx_mic, crypto->rx_mic, | |
407 | sizeof(key_entry.rx_mic)); | |
408 | ||
409 | offset = SHARED_KEY_ENTRY(key->hw_key_idx); | |
410 | timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); | |
411 | rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, | |
412 | USB_VENDOR_REQUEST_OUT, | |
413 | offset, &key_entry, | |
414 | sizeof(key_entry), | |
415 | timeout); | |
416 | } | |
417 | ||
418 | /* | |
419 | * The cipher types are stored over multiple registers | |
420 | * starting with SHARED_KEY_MODE_BASE each word will have | |
421 | * 32 bits and contains the cipher types for 2 bssidx each. | |
422 | * Using the correct defines correctly will cause overhead, | |
423 | * so just calculate the correct offset. | |
424 | */ | |
425 | field.bit_offset = 4 * (key->hw_key_idx % 8); | |
426 | field.bit_mask = 0x7 << field.bit_offset; | |
427 | ||
428 | offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); | |
429 | ||
430 | rt2x00usb_register_read(rt2x00dev, offset, ®); | |
431 | rt2x00_set_field32(®, field, | |
432 | (crypto->cmd == SET_KEY) * crypto->cipher); | |
433 | rt2x00usb_register_write(rt2x00dev, offset, reg); | |
434 | ||
435 | /* | |
436 | * Update WCID information | |
437 | */ | |
438 | rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); | |
439 | ||
440 | return 0; | |
441 | } | |
442 | ||
443 | static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, | |
444 | struct rt2x00lib_crypto *crypto, | |
445 | struct ieee80211_key_conf *key) | |
446 | { | |
447 | struct hw_key_entry key_entry; | |
448 | int timeout; | |
449 | u32 offset; | |
450 | ||
451 | if (crypto->cmd == SET_KEY) { | |
452 | /* | |
453 | * 1 pairwise key is possible per AID, this means that the AID | |
454 | * equals our hw_key_idx. Make sure the WCID starts _after_ the | |
455 | * last possible shared key entry. | |
456 | */ | |
457 | if (crypto->aid > (256 - 32)) | |
458 | return -ENOSPC; | |
459 | ||
460 | key->hw_key_idx = 32 + crypto->aid; | |
461 | ||
462 | memcpy(key_entry.key, crypto->key, | |
463 | sizeof(key_entry.key)); | |
464 | memcpy(key_entry.tx_mic, crypto->tx_mic, | |
465 | sizeof(key_entry.tx_mic)); | |
466 | memcpy(key_entry.rx_mic, crypto->rx_mic, | |
467 | sizeof(key_entry.rx_mic)); | |
468 | ||
469 | offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); | |
470 | timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); | |
471 | rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, | |
472 | USB_VENDOR_REQUEST_OUT, | |
473 | offset, &key_entry, | |
474 | sizeof(key_entry), | |
475 | timeout); | |
476 | } | |
477 | ||
478 | /* | |
479 | * Update WCID information | |
480 | */ | |
481 | rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); | |
482 | ||
483 | return 0; | |
484 | } | |
485 | ||
486 | static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev, | |
487 | const unsigned int filter_flags) | |
488 | { | |
489 | u32 reg; | |
490 | ||
491 | /* | |
492 | * Start configuration steps. | |
493 | * Note that the version error will always be dropped | |
494 | * and broadcast frames will always be accepted since | |
495 | * there is no filter for it at this time. | |
496 | */ | |
497 | rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, ®); | |
498 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, | |
499 | !(filter_flags & FIF_FCSFAIL)); | |
500 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, | |
501 | !(filter_flags & FIF_PLCPFAIL)); | |
502 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, | |
503 | !(filter_flags & FIF_PROMISC_IN_BSS)); | |
504 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); | |
505 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); | |
506 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, | |
507 | !(filter_flags & FIF_ALLMULTI)); | |
508 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); | |
509 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); | |
510 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, | |
511 | !(filter_flags & FIF_CONTROL)); | |
512 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, | |
513 | !(filter_flags & FIF_CONTROL)); | |
514 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, | |
515 | !(filter_flags & FIF_CONTROL)); | |
516 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, | |
517 | !(filter_flags & FIF_CONTROL)); | |
518 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, | |
519 | !(filter_flags & FIF_CONTROL)); | |
520 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, | |
521 | !(filter_flags & FIF_CONTROL)); | |
522 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); | |
523 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); | |
524 | rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, | |
525 | !(filter_flags & FIF_CONTROL)); | |
526 | rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg); | |
527 | } | |
528 | ||
529 | static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev, | |
530 | struct rt2x00_intf *intf, | |
531 | struct rt2x00intf_conf *conf, | |
532 | const unsigned int flags) | |
533 | { | |
534 | unsigned int beacon_base; | |
535 | u32 reg; | |
536 | ||
537 | if (flags & CONFIG_UPDATE_TYPE) { | |
538 | /* | |
539 | * Clear current synchronisation setup. | |
540 | * For the Beacon base registers we only need to clear | |
541 | * the first byte since that byte contains the VALID and OWNER | |
542 | * bits which (when set to 0) will invalidate the entire beacon. | |
543 | */ | |
544 | beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); | |
545 | rt2x00usb_register_write(rt2x00dev, beacon_base, 0); | |
546 | ||
547 | /* | |
548 | * Enable synchronisation. | |
549 | */ | |
550 | rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); | |
551 | rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); | |
552 | rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); | |
553 | rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); | |
554 | rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); | |
555 | } | |
556 | ||
557 | if (flags & CONFIG_UPDATE_MAC) { | |
558 | reg = le32_to_cpu(conf->mac[1]); | |
559 | rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); | |
560 | conf->mac[1] = cpu_to_le32(reg); | |
561 | ||
562 | rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, | |
563 | conf->mac, sizeof(conf->mac)); | |
564 | } | |
565 | ||
566 | if (flags & CONFIG_UPDATE_BSSID) { | |
567 | reg = le32_to_cpu(conf->bssid[1]); | |
568 | rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); | |
569 | rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); | |
570 | conf->bssid[1] = cpu_to_le32(reg); | |
571 | ||
572 | rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, | |
573 | conf->bssid, sizeof(conf->bssid)); | |
574 | } | |
575 | } | |
576 | ||
577 | static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev, | |
578 | struct rt2x00lib_erp *erp) | |
579 | { | |
580 | u32 reg; | |
581 | ||
582 | rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); | |
583 | rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, | |
584 | DIV_ROUND_UP(erp->ack_timeout, erp->slot_time)); | |
585 | rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); | |
586 | ||
587 | rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®); | |
588 | rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, | |
589 | !!erp->short_preamble); | |
590 | rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, | |
591 | !!erp->short_preamble); | |
592 | rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg); | |
593 | ||
594 | rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); | |
595 | rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, | |
596 | erp->cts_protection ? 2 : 0); | |
597 | rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); | |
598 | ||
599 | rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, | |
600 | erp->basic_rates); | |
601 | rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); | |
602 | ||
603 | rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); | |
604 | rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); | |
605 | rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); | |
606 | rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); | |
607 | ||
608 | rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, ®); | |
609 | rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); | |
610 | rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); | |
611 | rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); | |
612 | rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); | |
613 | rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); | |
614 | rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg); | |
8a566afe ID |
615 | |
616 | rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); | |
617 | rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, | |
618 | erp->beacon_int * 16); | |
619 | rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); | |
d53d9e67 ID |
620 | } |
621 | ||
622 | static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev, | |
623 | struct antenna_setup *ant) | |
624 | { | |
625 | u8 r1; | |
626 | u8 r3; | |
627 | ||
628 | rt2800usb_bbp_read(rt2x00dev, 1, &r1); | |
629 | rt2800usb_bbp_read(rt2x00dev, 3, &r3); | |
630 | ||
631 | /* | |
632 | * Configure the TX antenna. | |
633 | */ | |
634 | switch ((int)ant->tx) { | |
635 | case 1: | |
636 | rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); | |
637 | break; | |
638 | case 2: | |
639 | rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); | |
640 | break; | |
641 | case 3: | |
642 | /* Do nothing */ | |
643 | break; | |
644 | } | |
645 | ||
646 | /* | |
647 | * Configure the RX antenna. | |
648 | */ | |
649 | switch ((int)ant->rx) { | |
650 | case 1: | |
651 | rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); | |
652 | break; | |
653 | case 2: | |
654 | rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); | |
655 | break; | |
656 | case 3: | |
657 | rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); | |
658 | break; | |
659 | } | |
660 | ||
661 | rt2800usb_bbp_write(rt2x00dev, 3, r3); | |
662 | rt2800usb_bbp_write(rt2x00dev, 1, r1); | |
663 | } | |
664 | ||
665 | static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, | |
666 | struct rt2x00lib_conf *libconf) | |
667 | { | |
668 | u16 eeprom; | |
669 | short lna_gain; | |
670 | ||
671 | if (libconf->rf.channel <= 14) { | |
672 | rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); | |
673 | lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); | |
674 | } else if (libconf->rf.channel <= 64) { | |
675 | rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); | |
676 | lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); | |
677 | } else if (libconf->rf.channel <= 128) { | |
678 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); | |
679 | lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); | |
680 | } else { | |
681 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); | |
682 | lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); | |
683 | } | |
684 | ||
685 | rt2x00dev->lna_gain = lna_gain; | |
686 | } | |
687 | ||
688 | static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, | |
689 | struct ieee80211_conf *conf, | |
690 | struct rf_channel *rf, | |
691 | struct channel_info *info) | |
692 | { | |
693 | rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); | |
694 | ||
695 | if (rt2x00dev->default_ant.tx == 1) | |
696 | rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); | |
697 | ||
698 | if (rt2x00dev->default_ant.rx == 1) { | |
699 | rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); | |
700 | rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); | |
701 | } else if (rt2x00dev->default_ant.rx == 2) | |
702 | rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); | |
703 | ||
704 | if (rf->channel > 14) { | |
705 | /* | |
706 | * When TX power is below 0, we should increase it by 7 to | |
707 | * make it a positive value (Minumum value is -7). | |
708 | * However this means that values between 0 and 7 have | |
709 | * double meaning, and we should set a 7DBm boost flag. | |
710 | */ | |
711 | rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, | |
712 | (info->tx_power1 >= 0)); | |
713 | ||
714 | if (info->tx_power1 < 0) | |
715 | info->tx_power1 += 7; | |
716 | ||
717 | rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, | |
718 | TXPOWER_A_TO_DEV(info->tx_power1)); | |
719 | ||
720 | rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, | |
721 | (info->tx_power2 >= 0)); | |
722 | ||
723 | if (info->tx_power2 < 0) | |
724 | info->tx_power2 += 7; | |
725 | ||
726 | rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, | |
727 | TXPOWER_A_TO_DEV(info->tx_power2)); | |
728 | } else { | |
729 | rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, | |
730 | TXPOWER_G_TO_DEV(info->tx_power1)); | |
731 | rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, | |
732 | TXPOWER_G_TO_DEV(info->tx_power2)); | |
733 | } | |
734 | ||
735 | rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); | |
736 | ||
737 | rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); | |
738 | rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); | |
739 | rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); | |
740 | rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); | |
741 | ||
742 | udelay(200); | |
743 | ||
744 | rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); | |
745 | rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); | |
746 | rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); | |
747 | rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); | |
748 | ||
749 | udelay(200); | |
750 | ||
751 | rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); | |
752 | rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); | |
753 | rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); | |
754 | rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); | |
755 | } | |
756 | ||
757 | static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, | |
758 | struct ieee80211_conf *conf, | |
759 | struct rf_channel *rf, | |
760 | struct channel_info *info) | |
761 | { | |
762 | u8 rfcsr; | |
763 | ||
764 | rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1); | |
765 | rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3); | |
766 | ||
767 | rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr); | |
768 | rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); | |
769 | rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr); | |
770 | ||
771 | rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr); | |
772 | rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, | |
773 | TXPOWER_G_TO_DEV(info->tx_power1)); | |
774 | rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr); | |
775 | ||
776 | rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); | |
777 | rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); | |
778 | rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); | |
779 | ||
780 | rt2800usb_rfcsr_write(rt2x00dev, 24, | |
781 | rt2x00dev->calibration[conf_is_ht40(conf)]); | |
782 | ||
783 | rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); | |
784 | rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); | |
785 | rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); | |
786 | } | |
787 | ||
788 | static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, | |
789 | struct ieee80211_conf *conf, | |
790 | struct rf_channel *rf, | |
791 | struct channel_info *info) | |
792 | { | |
793 | u32 reg; | |
794 | unsigned int tx_pin; | |
795 | u8 bbp; | |
796 | ||
797 | if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) | |
798 | rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info); | |
799 | else | |
800 | rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info); | |
801 | ||
802 | /* | |
803 | * Change BBP settings | |
804 | */ | |
805 | rt2800usb_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); | |
806 | rt2800usb_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); | |
807 | rt2800usb_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); | |
808 | rt2800usb_bbp_write(rt2x00dev, 86, 0); | |
809 | ||
810 | if (rf->channel <= 14) { | |
811 | if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { | |
812 | rt2800usb_bbp_write(rt2x00dev, 82, 0x62); | |
813 | rt2800usb_bbp_write(rt2x00dev, 75, 0x46); | |
814 | } else { | |
815 | rt2800usb_bbp_write(rt2x00dev, 82, 0x84); | |
816 | rt2800usb_bbp_write(rt2x00dev, 75, 0x50); | |
817 | } | |
818 | } else { | |
819 | rt2800usb_bbp_write(rt2x00dev, 82, 0xf2); | |
820 | ||
821 | if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) | |
822 | rt2800usb_bbp_write(rt2x00dev, 75, 0x46); | |
823 | else | |
824 | rt2800usb_bbp_write(rt2x00dev, 75, 0x50); | |
825 | } | |
826 | ||
827 | rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, ®); | |
828 | rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); | |
829 | rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); | |
830 | rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); | |
831 | rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg); | |
832 | ||
833 | tx_pin = 0; | |
834 | ||
835 | /* Turn on unused PA or LNA when not using 1T or 1R */ | |
836 | if (rt2x00dev->default_ant.tx != 1) { | |
837 | rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); | |
838 | rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); | |
839 | } | |
840 | ||
841 | /* Turn on unused PA or LNA when not using 1T or 1R */ | |
842 | if (rt2x00dev->default_ant.rx != 1) { | |
843 | rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); | |
844 | rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); | |
845 | } | |
846 | ||
847 | rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); | |
848 | rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); | |
849 | rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); | |
850 | rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); | |
851 | rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); | |
852 | rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); | |
853 | ||
854 | rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); | |
855 | ||
856 | rt2800usb_bbp_read(rt2x00dev, 4, &bbp); | |
857 | rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); | |
858 | rt2800usb_bbp_write(rt2x00dev, 4, bbp); | |
859 | ||
860 | rt2800usb_bbp_read(rt2x00dev, 3, &bbp); | |
861 | rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); | |
862 | rt2800usb_bbp_write(rt2x00dev, 3, bbp); | |
863 | ||
864 | if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { | |
865 | if (conf_is_ht40(conf)) { | |
866 | rt2800usb_bbp_write(rt2x00dev, 69, 0x1a); | |
867 | rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); | |
868 | rt2800usb_bbp_write(rt2x00dev, 73, 0x16); | |
869 | } else { | |
870 | rt2800usb_bbp_write(rt2x00dev, 69, 0x16); | |
871 | rt2800usb_bbp_write(rt2x00dev, 70, 0x08); | |
872 | rt2800usb_bbp_write(rt2x00dev, 73, 0x11); | |
873 | } | |
874 | } | |
875 | ||
876 | msleep(1); | |
877 | } | |
878 | ||
879 | static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev, | |
880 | const int txpower) | |
881 | { | |
882 | u32 reg; | |
883 | u32 value = TXPOWER_G_TO_DEV(txpower); | |
884 | u8 r1; | |
885 | ||
886 | rt2800usb_bbp_read(rt2x00dev, 1, &r1); | |
887 | rt2x00_set_field8(®, BBP1_TX_POWER, 0); | |
888 | rt2800usb_bbp_write(rt2x00dev, 1, r1); | |
889 | ||
890 | rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, ®); | |
891 | rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); | |
892 | rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); | |
893 | rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); | |
894 | rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); | |
895 | rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); | |
896 | rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); | |
897 | rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); | |
898 | rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); | |
899 | rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg); | |
900 | ||
901 | rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, ®); | |
902 | rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); | |
903 | rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); | |
904 | rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); | |
905 | rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); | |
906 | rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); | |
907 | rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); | |
908 | rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); | |
909 | rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); | |
910 | rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg); | |
911 | ||
912 | rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, ®); | |
913 | rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); | |
914 | rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); | |
915 | rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); | |
916 | rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); | |
917 | rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); | |
918 | rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); | |
919 | rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); | |
920 | rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); | |
921 | rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg); | |
922 | ||
923 | rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, ®); | |
924 | rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); | |
925 | rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); | |
926 | rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); | |
927 | rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); | |
928 | rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); | |
929 | rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); | |
930 | rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); | |
931 | rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); | |
932 | rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg); | |
933 | ||
934 | rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, ®); | |
935 | rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); | |
936 | rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); | |
937 | rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); | |
938 | rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); | |
939 | rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg); | |
940 | } | |
941 | ||
942 | static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev, | |
943 | struct rt2x00lib_conf *libconf) | |
944 | { | |
945 | u32 reg; | |
946 | ||
947 | rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, ®); | |
948 | rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, | |
949 | libconf->conf->short_frame_max_tx_count); | |
950 | rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, | |
951 | libconf->conf->long_frame_max_tx_count); | |
952 | rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); | |
953 | rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); | |
954 | rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); | |
955 | rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); | |
956 | rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg); | |
957 | } | |
958 | ||
d53d9e67 ID |
959 | static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev, |
960 | struct rt2x00lib_conf *libconf) | |
961 | { | |
962 | enum dev_state state = | |
963 | (libconf->conf->flags & IEEE80211_CONF_PS) ? | |
964 | STATE_SLEEP : STATE_AWAKE; | |
965 | u32 reg; | |
966 | ||
967 | if (state == STATE_SLEEP) { | |
968 | rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); | |
969 | ||
970 | rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); | |
971 | rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); | |
972 | rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, | |
973 | libconf->conf->listen_interval - 1); | |
974 | rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); | |
975 | rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); | |
976 | ||
15e46928 | 977 | rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); |
d53d9e67 | 978 | } else { |
15e46928 | 979 | rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); |
d53d9e67 ID |
980 | |
981 | rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); | |
982 | rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); | |
983 | rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); | |
984 | rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); | |
985 | rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); | |
986 | } | |
987 | } | |
988 | ||
989 | static void rt2800usb_config(struct rt2x00_dev *rt2x00dev, | |
990 | struct rt2x00lib_conf *libconf, | |
991 | const unsigned int flags) | |
992 | { | |
993 | /* Always recalculate LNA gain before changing configuration */ | |
994 | rt2800usb_config_lna_gain(rt2x00dev, libconf); | |
995 | ||
996 | if (flags & IEEE80211_CONF_CHANGE_CHANNEL) | |
997 | rt2800usb_config_channel(rt2x00dev, libconf->conf, | |
998 | &libconf->rf, &libconf->channel); | |
999 | if (flags & IEEE80211_CONF_CHANGE_POWER) | |
1000 | rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level); | |
1001 | if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) | |
1002 | rt2800usb_config_retry_limit(rt2x00dev, libconf); | |
d53d9e67 ID |
1003 | if (flags & IEEE80211_CONF_CHANGE_PS) |
1004 | rt2800usb_config_ps(rt2x00dev, libconf); | |
1005 | } | |
1006 | ||
1007 | /* | |
1008 | * Link tuning | |
1009 | */ | |
1010 | static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev, | |
1011 | struct link_qual *qual) | |
1012 | { | |
1013 | u32 reg; | |
1014 | ||
1015 | /* | |
1016 | * Update FCS error count from register. | |
1017 | */ | |
1018 | rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®); | |
1019 | qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); | |
1020 | } | |
1021 | ||
1022 | static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev) | |
1023 | { | |
1024 | if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { | |
1025 | if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) | |
1026 | return 0x1c + (2 * rt2x00dev->lna_gain); | |
1027 | else | |
1028 | return 0x2e + rt2x00dev->lna_gain; | |
1029 | } | |
1030 | ||
1031 | if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) | |
1032 | return 0x32 + (rt2x00dev->lna_gain * 5) / 3; | |
1033 | else | |
1034 | return 0x3a + (rt2x00dev->lna_gain * 5) / 3; | |
1035 | } | |
1036 | ||
1037 | static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev, | |
1038 | struct link_qual *qual, u8 vgc_level) | |
1039 | { | |
1040 | if (qual->vgc_level != vgc_level) { | |
1041 | rt2800usb_bbp_write(rt2x00dev, 66, vgc_level); | |
1042 | qual->vgc_level = vgc_level; | |
1043 | qual->vgc_level_reg = vgc_level; | |
1044 | } | |
1045 | } | |
1046 | ||
1047 | static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev, | |
1048 | struct link_qual *qual) | |
1049 | { | |
1050 | rt2800usb_set_vgc(rt2x00dev, qual, | |
1051 | rt2800usb_get_default_vgc(rt2x00dev)); | |
1052 | } | |
1053 | ||
1054 | static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev, | |
1055 | struct link_qual *qual, const u32 count) | |
1056 | { | |
1057 | if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) | |
1058 | return; | |
1059 | ||
1060 | /* | |
1061 | * When RSSI is better then -80 increase VGC level with 0x10 | |
1062 | */ | |
1063 | rt2800usb_set_vgc(rt2x00dev, qual, | |
1064 | rt2800usb_get_default_vgc(rt2x00dev) + | |
1065 | ((qual->rssi > -80) * 0x10)); | |
1066 | } | |
1067 | ||
1068 | /* | |
1069 | * Firmware functions | |
1070 | */ | |
1071 | static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) | |
1072 | { | |
1073 | return FIRMWARE_RT2870; | |
1074 | } | |
1075 | ||
1076 | static bool rt2800usb_check_crc(const u8 *data, const size_t len) | |
1077 | { | |
1078 | u16 fw_crc; | |
1079 | u16 crc; | |
1080 | ||
1081 | /* | |
1082 | * The last 2 bytes in the firmware array are the crc checksum itself, | |
1083 | * this means that we should never pass those 2 bytes to the crc | |
1084 | * algorithm. | |
1085 | */ | |
1086 | fw_crc = (data[len - 2] << 8 | data[len - 1]); | |
1087 | ||
1088 | /* | |
1089 | * Use the crc ccitt algorithm. | |
1090 | * This will return the same value as the legacy driver which | |
1091 | * used bit ordering reversion on the both the firmware bytes | |
1092 | * before input input as well as on the final output. | |
1093 | * Obviously using crc ccitt directly is much more efficient. | |
1094 | */ | |
1095 | crc = crc_ccitt(~0, data, len - 2); | |
1096 | ||
1097 | /* | |
1098 | * There is a small difference between the crc-itu-t + bitrev and | |
1099 | * the crc-ccitt crc calculation. In the latter method the 2 bytes | |
1100 | * will be swapped, use swab16 to convert the crc to the correct | |
1101 | * value. | |
1102 | */ | |
1103 | crc = swab16(crc); | |
1104 | ||
1105 | return fw_crc == crc; | |
1106 | } | |
1107 | ||
1108 | static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev, | |
1109 | const u8 *data, const size_t len) | |
1110 | { | |
1111 | u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff; | |
1112 | size_t offset = 0; | |
1113 | ||
1114 | /* | |
1115 | * Firmware files: | |
1116 | * There are 2 variations of the rt2870 firmware. | |
1117 | * a) size: 4kb | |
1118 | * b) size: 8kb | |
1119 | * Note that (b) contains 2 seperate firmware blobs of 4k | |
1120 | * within the file. The first blob is the same firmware as (a), | |
1121 | * but the second blob is for the additional chipsets. | |
1122 | */ | |
1123 | if (len != 4096 && len != 8192) | |
1124 | return FW_BAD_LENGTH; | |
1125 | ||
1126 | /* | |
1127 | * Check if we need the upper 4kb firmware data or not. | |
1128 | */ | |
1129 | if ((len == 4096) && | |
1130 | (chipset != 0x2860) && | |
1131 | (chipset != 0x2872) && | |
1132 | (chipset != 0x3070)) | |
1133 | return FW_BAD_VERSION; | |
1134 | ||
1135 | /* | |
1136 | * 8kb firmware files must be checked as if it were | |
1137 | * 2 seperate firmware files. | |
1138 | */ | |
1139 | while (offset < len) { | |
1140 | if (!rt2800usb_check_crc(data + offset, 4096)) | |
1141 | return FW_BAD_CRC; | |
1142 | ||
1143 | offset += 4096; | |
1144 | } | |
1145 | ||
1146 | return FW_OK; | |
1147 | } | |
1148 | ||
1149 | static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, | |
1150 | const u8 *data, const size_t len) | |
1151 | { | |
1152 | unsigned int i; | |
1153 | int status; | |
1154 | u32 reg; | |
1155 | u32 offset; | |
1156 | u32 length; | |
1157 | u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff; | |
1158 | ||
1159 | /* | |
1160 | * Check which section of the firmware we need. | |
1161 | */ | |
15e46928 ID |
1162 | if ((chipset == 0x2860) || |
1163 | (chipset == 0x2872) || | |
1164 | (chipset == 0x3070)) { | |
d53d9e67 ID |
1165 | offset = 0; |
1166 | length = 4096; | |
1167 | } else { | |
1168 | offset = 4096; | |
1169 | length = 4096; | |
1170 | } | |
1171 | ||
1172 | /* | |
1173 | * Wait for stable hardware. | |
1174 | */ | |
1175 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | |
1176 | rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); | |
1177 | if (reg && reg != ~0) | |
1178 | break; | |
1179 | msleep(1); | |
1180 | } | |
1181 | ||
1182 | if (i == REGISTER_BUSY_COUNT) { | |
1183 | ERROR(rt2x00dev, "Unstable hardware.\n"); | |
1184 | return -EBUSY; | |
1185 | } | |
1186 | ||
1187 | /* | |
1188 | * Write firmware to device. | |
1189 | */ | |
1190 | rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, | |
1191 | USB_VENDOR_REQUEST_OUT, | |
1192 | FIRMWARE_IMAGE_BASE, | |
1193 | data + offset, length, | |
1194 | REGISTER_TIMEOUT32(length)); | |
1195 | ||
1196 | rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); | |
1197 | rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); | |
1198 | ||
1199 | /* | |
1200 | * Send firmware request to device to load firmware, | |
1201 | * we need to specify a long timeout time. | |
1202 | */ | |
1203 | status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, | |
1204 | 0, USB_MODE_FIRMWARE, | |
1205 | REGISTER_TIMEOUT_FIRMWARE); | |
1206 | if (status < 0) { | |
1207 | ERROR(rt2x00dev, "Failed to write Firmware to device.\n"); | |
1208 | return status; | |
1209 | } | |
1210 | ||
15e46928 ID |
1211 | msleep(10); |
1212 | rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); | |
1213 | ||
1214 | /* | |
1215 | * Send signal to firmware during boot time. | |
1216 | */ | |
1217 | rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); | |
1218 | ||
1219 | if ((chipset == 0x3070) || | |
1220 | (chipset == 0x3071) || | |
1221 | (chipset == 0x3572)) { | |
1222 | udelay(200); | |
1223 | rt2800usb_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); | |
1224 | udelay(10); | |
1225 | } | |
1226 | ||
d53d9e67 ID |
1227 | /* |
1228 | * Wait for device to stabilize. | |
1229 | */ | |
1230 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | |
1231 | rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®); | |
1232 | if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) | |
1233 | break; | |
1234 | msleep(1); | |
1235 | } | |
1236 | ||
1237 | if (i == REGISTER_BUSY_COUNT) { | |
1238 | ERROR(rt2x00dev, "PBF system register not ready.\n"); | |
1239 | return -EBUSY; | |
1240 | } | |
1241 | ||
1242 | /* | |
1243 | * Initialize firmware. | |
1244 | */ | |
1245 | rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0); | |
1246 | rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); | |
1247 | msleep(1); | |
1248 | ||
1249 | return 0; | |
1250 | } | |
1251 | ||
1252 | /* | |
1253 | * Initialization functions. | |
1254 | */ | |
1255 | static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) | |
1256 | { | |
1257 | u32 reg; | |
1258 | unsigned int i; | |
1259 | ||
1260 | /* | |
1261 | * Wait untill BBP and RF are ready. | |
1262 | */ | |
1263 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | |
1264 | rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); | |
1265 | if (reg && reg != ~0) | |
1266 | break; | |
1267 | msleep(1); | |
1268 | } | |
1269 | ||
1270 | if (i == REGISTER_BUSY_COUNT) { | |
1271 | ERROR(rt2x00dev, "Unstable hardware.\n"); | |
1272 | return -EBUSY; | |
1273 | } | |
1274 | ||
1275 | rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®); | |
1276 | rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000); | |
1277 | ||
1278 | rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); | |
1279 | rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); | |
1280 | rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); | |
1281 | rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); | |
1282 | ||
1283 | rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); | |
1284 | ||
1285 | rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, | |
1286 | USB_MODE_RESET, REGISTER_TIMEOUT); | |
1287 | ||
1288 | rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); | |
1289 | ||
1290 | rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, ®); | |
1291 | rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ | |
1292 | rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ | |
1293 | rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ | |
1294 | rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ | |
1295 | rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg); | |
1296 | ||
1297 | rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, ®); | |
1298 | rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ | |
1299 | rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ | |
1300 | rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ | |
1301 | rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ | |
1302 | rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg); | |
1303 | ||
1304 | rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); | |
1305 | rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); | |
1306 | ||
1307 | rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); | |
1308 | ||
1309 | rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); | |
1310 | rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0); | |
1311 | rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); | |
1312 | rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); | |
1313 | rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); | |
1314 | rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); | |
1315 | rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); | |
1316 | rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); | |
1317 | ||
1318 | if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { | |
1319 | rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); | |
1320 | rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); | |
1321 | rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); | |
1322 | } else { | |
1323 | rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); | |
1324 | rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); | |
1325 | } | |
1326 | ||
1327 | rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, ®); | |
1328 | rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); | |
1329 | rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); | |
1330 | rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); | |
1331 | rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); | |
1332 | rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); | |
1333 | rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); | |
1334 | rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); | |
1335 | rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); | |
1336 | rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg); | |
1337 | ||
1338 | rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); | |
1339 | rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); | |
1340 | rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); | |
1341 | rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); | |
1342 | ||
1343 | rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, ®); | |
1344 | rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); | |
1345 | if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && | |
1346 | rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) | |
1347 | rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); | |
1348 | else | |
1349 | rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); | |
1350 | rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); | |
1351 | rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); | |
1352 | rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg); | |
1353 | ||
1354 | rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); | |
1355 | ||
1356 | rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®); | |
1357 | rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); | |
1358 | rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0); | |
1359 | rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); | |
1360 | rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); | |
1361 | rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); | |
1362 | rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg); | |
1363 | ||
1364 | rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); | |
1365 | rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8); | |
1366 | rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); | |
1367 | rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); | |
1368 | rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); | |
1369 | rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); | |
1370 | rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); | |
1371 | rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1); | |
1372 | rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); | |
1373 | rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1); | |
1374 | rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); | |
1375 | ||
1376 | rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); | |
1377 | rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8); | |
1378 | rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); | |
1379 | rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); | |
1380 | rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); | |
1381 | rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); | |
1382 | rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); | |
1383 | rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1); | |
1384 | rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); | |
1385 | rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1); | |
1386 | rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); | |
1387 | ||
1388 | rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); | |
1389 | rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); | |
1390 | rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0); | |
1391 | rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1); | |
1392 | rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1); | |
1393 | rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); | |
1394 | rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); | |
1395 | rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); | |
1396 | rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); | |
1397 | rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); | |
1398 | rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); | |
1399 | ||
1400 | rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); | |
1401 | rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); | |
1402 | rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0); | |
1403 | rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1); | |
1404 | rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); | |
1405 | rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); | |
1406 | rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); | |
1407 | rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); | |
1408 | rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); | |
1409 | rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); | |
1410 | rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); | |
1411 | ||
1412 | rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); | |
1413 | rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); | |
1414 | rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0); | |
1415 | rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1); | |
1416 | rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1); | |
1417 | rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); | |
1418 | rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); | |
1419 | rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); | |
1420 | rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); | |
1421 | rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); | |
1422 | rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); | |
1423 | ||
1424 | rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); | |
1425 | rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); | |
1426 | rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0); | |
1427 | rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1); | |
1428 | rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1); | |
1429 | rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); | |
1430 | rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); | |
1431 | rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); | |
1432 | rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); | |
1433 | rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); | |
1434 | rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); | |
1435 | ||
1436 | rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006); | |
1437 | ||
1438 | rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); | |
1439 | rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); | |
1440 | rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); | |
1441 | rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); | |
1442 | rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); | |
1443 | rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3); | |
1444 | rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0); | |
1445 | rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0); | |
1446 | rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0); | |
1447 | rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0); | |
1448 | rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); | |
1449 | ||
1450 | rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f); | |
1451 | rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002); | |
1452 | ||
1453 | rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); | |
1454 | rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32); | |
1455 | rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, | |
1456 | IEEE80211_MAX_RTS_THRESHOLD); | |
1457 | rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0); | |
1458 | rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); | |
1459 | ||
1460 | rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); | |
1461 | rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); | |
1462 | ||
1463 | /* | |
1464 | * ASIC will keep garbage value after boot, clear encryption keys. | |
1465 | */ | |
1466 | for (i = 0; i < 256; i++) { | |
1467 | u32 wcid[2] = { 0xffffffff, 0x00ffffff }; | |
1468 | rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), | |
1469 | wcid, sizeof(wcid)); | |
1470 | ||
1471 | rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1); | |
1472 | rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); | |
1473 | } | |
1474 | ||
1475 | for (i = 0; i < 16; i++) | |
1476 | rt2x00usb_register_write(rt2x00dev, | |
1477 | SHARED_KEY_MODE_ENTRY(i), 0); | |
1478 | ||
1479 | /* | |
1480 | * Clear all beacons | |
1481 | * For the Beacon base registers we only need to clear | |
1482 | * the first byte since that byte contains the VALID and OWNER | |
1483 | * bits which (when set to 0) will invalidate the entire beacon. | |
1484 | */ | |
1485 | rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); | |
1486 | rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); | |
1487 | rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); | |
1488 | rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); | |
1489 | rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0); | |
1490 | rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0); | |
1491 | rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0); | |
1492 | rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0); | |
1493 | ||
1494 | rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, ®); | |
1495 | rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30); | |
1496 | rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg); | |
1497 | ||
1498 | rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, ®); | |
1499 | rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); | |
1500 | rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); | |
1501 | rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); | |
1502 | rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); | |
1503 | rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); | |
1504 | rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); | |
1505 | rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); | |
1506 | rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); | |
1507 | rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg); | |
1508 | ||
1509 | rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, ®); | |
1510 | rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); | |
1511 | rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); | |
1512 | rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); | |
1513 | rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); | |
1514 | rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); | |
1515 | rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); | |
1516 | rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); | |
1517 | rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); | |
1518 | rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg); | |
1519 | ||
1520 | rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, ®); | |
1521 | rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); | |
1522 | rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); | |
1523 | rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 3); | |
1524 | rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); | |
1525 | rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); | |
1526 | rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); | |
1527 | rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); | |
1528 | rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); | |
1529 | rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg); | |
1530 | ||
1531 | rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, ®); | |
1532 | rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); | |
1533 | rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); | |
1534 | rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); | |
1535 | rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); | |
1536 | rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg); | |
1537 | ||
1538 | /* | |
1539 | * We must clear the error counters. | |
1540 | * These registers are cleared on read, | |
1541 | * so we may pass a useless variable to store the value. | |
1542 | */ | |
1543 | rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®); | |
1544 | rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, ®); | |
1545 | rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, ®); | |
1546 | rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, ®); | |
1547 | rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, ®); | |
1548 | rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, ®); | |
1549 | ||
1550 | return 0; | |
1551 | } | |
1552 | ||
1553 | static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) | |
1554 | { | |
1555 | unsigned int i; | |
1556 | u32 reg; | |
1557 | ||
1558 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | |
1559 | rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, ®); | |
1560 | if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) | |
1561 | return 0; | |
1562 | ||
1563 | udelay(REGISTER_BUSY_DELAY); | |
1564 | } | |
1565 | ||
1566 | ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n"); | |
1567 | return -EACCES; | |
1568 | } | |
1569 | ||
1570 | static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) | |
1571 | { | |
1572 | unsigned int i; | |
1573 | u8 value; | |
1574 | ||
15e46928 ID |
1575 | /* |
1576 | * BBP was enabled after firmware was loaded, | |
1577 | * but we need to reactivate it now. | |
1578 | */ | |
1579 | rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0); | |
1580 | rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); | |
1581 | msleep(1); | |
1582 | ||
d53d9e67 ID |
1583 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { |
1584 | rt2800usb_bbp_read(rt2x00dev, 0, &value); | |
1585 | if ((value != 0xff) && (value != 0x00)) | |
1586 | return 0; | |
1587 | udelay(REGISTER_BUSY_DELAY); | |
1588 | } | |
1589 | ||
1590 | ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); | |
1591 | return -EACCES; | |
1592 | } | |
1593 | ||
1594 | static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev) | |
1595 | { | |
1596 | unsigned int i; | |
1597 | u16 eeprom; | |
1598 | u8 reg_id; | |
1599 | u8 value; | |
1600 | ||
1601 | if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) || | |
1602 | rt2800usb_wait_bbp_ready(rt2x00dev))) | |
1603 | return -EACCES; | |
1604 | ||
1605 | rt2800usb_bbp_write(rt2x00dev, 65, 0x2c); | |
1606 | rt2800usb_bbp_write(rt2x00dev, 66, 0x38); | |
1607 | rt2800usb_bbp_write(rt2x00dev, 69, 0x12); | |
1608 | rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); | |
1609 | rt2800usb_bbp_write(rt2x00dev, 73, 0x10); | |
1610 | rt2800usb_bbp_write(rt2x00dev, 81, 0x37); | |
1611 | rt2800usb_bbp_write(rt2x00dev, 82, 0x62); | |
1612 | rt2800usb_bbp_write(rt2x00dev, 83, 0x6a); | |
1613 | rt2800usb_bbp_write(rt2x00dev, 84, 0x99); | |
1614 | rt2800usb_bbp_write(rt2x00dev, 86, 0x00); | |
1615 | rt2800usb_bbp_write(rt2x00dev, 91, 0x04); | |
1616 | rt2800usb_bbp_write(rt2x00dev, 92, 0x00); | |
1617 | rt2800usb_bbp_write(rt2x00dev, 103, 0x00); | |
1618 | rt2800usb_bbp_write(rt2x00dev, 105, 0x05); | |
1619 | ||
1620 | if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { | |
1621 | rt2800usb_bbp_write(rt2x00dev, 69, 0x16); | |
1622 | rt2800usb_bbp_write(rt2x00dev, 73, 0x12); | |
1623 | } | |
1624 | ||
1625 | if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) { | |
1626 | rt2800usb_bbp_write(rt2x00dev, 84, 0x19); | |
1627 | } | |
1628 | ||
1629 | if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { | |
1630 | rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); | |
1631 | rt2800usb_bbp_write(rt2x00dev, 84, 0x99); | |
1632 | rt2800usb_bbp_write(rt2x00dev, 105, 0x05); | |
1633 | } | |
1634 | ||
1635 | for (i = 0; i < EEPROM_BBP_SIZE; i++) { | |
1636 | rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); | |
1637 | ||
1638 | if (eeprom != 0xffff && eeprom != 0x0000) { | |
1639 | reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); | |
1640 | value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); | |
1641 | rt2800usb_bbp_write(rt2x00dev, reg_id, value); | |
1642 | } | |
1643 | } | |
1644 | ||
1645 | return 0; | |
1646 | } | |
1647 | ||
1648 | static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev, | |
1649 | bool bw40, u8 rfcsr24, u8 filter_target) | |
1650 | { | |
1651 | unsigned int i; | |
1652 | u8 bbp; | |
1653 | u8 rfcsr; | |
1654 | u8 passband; | |
1655 | u8 stopband; | |
1656 | u8 overtuned = 0; | |
1657 | ||
1658 | rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); | |
1659 | ||
1660 | rt2800usb_bbp_read(rt2x00dev, 4, &bbp); | |
1661 | rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); | |
1662 | rt2800usb_bbp_write(rt2x00dev, 4, bbp); | |
1663 | ||
1664 | rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); | |
1665 | rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); | |
1666 | rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); | |
1667 | ||
1668 | /* | |
1669 | * Set power & frequency of passband test tone | |
1670 | */ | |
1671 | rt2800usb_bbp_write(rt2x00dev, 24, 0); | |
1672 | ||
1673 | for (i = 0; i < 100; i++) { | |
1674 | rt2800usb_bbp_write(rt2x00dev, 25, 0x90); | |
1675 | msleep(1); | |
1676 | ||
1677 | rt2800usb_bbp_read(rt2x00dev, 55, &passband); | |
1678 | if (passband) | |
1679 | break; | |
1680 | } | |
1681 | ||
1682 | /* | |
1683 | * Set power & frequency of stopband test tone | |
1684 | */ | |
1685 | rt2800usb_bbp_write(rt2x00dev, 24, 0x06); | |
1686 | ||
1687 | for (i = 0; i < 100; i++) { | |
1688 | rt2800usb_bbp_write(rt2x00dev, 25, 0x90); | |
1689 | msleep(1); | |
1690 | ||
1691 | rt2800usb_bbp_read(rt2x00dev, 55, &stopband); | |
1692 | ||
1693 | if ((passband - stopband) <= filter_target) { | |
1694 | rfcsr24++; | |
1695 | overtuned += ((passband - stopband) == filter_target); | |
1696 | } else | |
1697 | break; | |
1698 | ||
1699 | rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); | |
1700 | } | |
1701 | ||
1702 | rfcsr24 -= !!overtuned; | |
1703 | ||
1704 | rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); | |
1705 | return rfcsr24; | |
1706 | } | |
1707 | ||
1708 | static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev) | |
1709 | { | |
1710 | u8 rfcsr; | |
1711 | u8 bbp; | |
1712 | ||
1713 | if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) | |
1714 | return 0; | |
1715 | ||
1716 | /* | |
1717 | * Init RF calibration. | |
1718 | */ | |
1719 | rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr); | |
1720 | rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); | |
1721 | rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); | |
1722 | msleep(1); | |
1723 | rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); | |
1724 | rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); | |
1725 | ||
1726 | rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40); | |
1727 | rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03); | |
1728 | rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02); | |
1729 | rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70); | |
1730 | rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f); | |
1731 | rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71); | |
1732 | rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21); | |
1733 | rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b); | |
1734 | rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90); | |
1735 | rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58); | |
1736 | rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3); | |
1737 | rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92); | |
1738 | rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c); | |
1739 | rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02); | |
1740 | rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba); | |
1741 | rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb); | |
1742 | rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16); | |
1743 | rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01); | |
1744 | rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03); | |
1745 | rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f); | |
1746 | ||
1747 | /* | |
1748 | * Set RX Filter calibration for 20MHz and 40MHz | |
1749 | */ | |
1750 | rt2x00dev->calibration[0] = | |
1751 | rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16); | |
1752 | rt2x00dev->calibration[1] = | |
1753 | rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19); | |
1754 | ||
1755 | /* | |
1756 | * Set back to initial state | |
1757 | */ | |
1758 | rt2800usb_bbp_write(rt2x00dev, 24, 0); | |
1759 | ||
1760 | rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); | |
1761 | rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); | |
1762 | rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); | |
1763 | ||
1764 | /* | |
1765 | * set BBP back to BW20 | |
1766 | */ | |
1767 | rt2800usb_bbp_read(rt2x00dev, 4, &bbp); | |
1768 | rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); | |
1769 | rt2800usb_bbp_write(rt2x00dev, 4, bbp); | |
1770 | ||
1771 | return 0; | |
1772 | } | |
1773 | ||
1774 | /* | |
1775 | * Device state switch handlers. | |
1776 | */ | |
1777 | static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev, | |
1778 | enum dev_state state) | |
1779 | { | |
1780 | u32 reg; | |
1781 | ||
1782 | rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); | |
1783 | rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, | |
1784 | (state == STATE_RADIO_RX_ON) || | |
1785 | (state == STATE_RADIO_RX_ON_LINK)); | |
1786 | rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); | |
1787 | } | |
1788 | ||
1789 | static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) | |
1790 | { | |
1791 | unsigned int i; | |
1792 | u32 reg; | |
1793 | ||
1794 | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | |
1795 | rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); | |
1796 | if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && | |
1797 | !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) | |
1798 | return 0; | |
1799 | ||
1800 | msleep(1); | |
1801 | } | |
1802 | ||
1803 | ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n"); | |
1804 | return -EACCES; | |
1805 | } | |
1806 | ||
1807 | static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) | |
1808 | { | |
1809 | u32 reg; | |
1810 | u16 word; | |
1811 | ||
1812 | /* | |
1813 | * Initialize all registers. | |
1814 | */ | |
1815 | if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) || | |
1816 | rt2800usb_init_registers(rt2x00dev) || | |
1817 | rt2800usb_init_bbp(rt2x00dev) || | |
1818 | rt2800usb_init_rfcsr(rt2x00dev))) | |
1819 | return -EIO; | |
1820 | ||
1821 | rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); | |
1822 | rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); | |
1823 | rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); | |
1824 | ||
1825 | udelay(50); | |
1826 | ||
1827 | rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); | |
1828 | rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); | |
1829 | rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); | |
1830 | rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); | |
1831 | rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); | |
1832 | ||
1833 | ||
1834 | rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, ®); | |
1835 | rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0); | |
1836 | /* Don't use bulk in aggregation when working with USB 1.1 */ | |
1837 | rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, | |
1838 | (rt2x00dev->rx->usb_maxpacket == 512)); | |
1839 | rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128); | |
15e46928 ID |
1840 | /* |
1841 | * Total room for RX frames in kilobytes, PBF might still exceed | |
1842 | * this limit so reduce the number to prevent errors. | |
1843 | */ | |
1844 | rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_LIMIT, | |
1845 | ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3); | |
d53d9e67 ID |
1846 | rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1); |
1847 | rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1); | |
1848 | rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg); | |
1849 | ||
1850 | rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); | |
1851 | rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); | |
1852 | rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); | |
1853 | rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); | |
1854 | ||
d53d9e67 ID |
1855 | /* |
1856 | * Initialize LED control | |
1857 | */ | |
1858 | rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); | |
1859 | rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff, | |
1860 | word & 0xff, (word >> 8) & 0xff); | |
1861 | ||
1862 | rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); | |
1863 | rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff, | |
1864 | word & 0xff, (word >> 8) & 0xff); | |
1865 | ||
1866 | rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); | |
1867 | rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff, | |
1868 | word & 0xff, (word >> 8) & 0xff); | |
1869 | ||
1870 | return 0; | |
1871 | } | |
1872 | ||
1873 | static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev) | |
1874 | { | |
1875 | u32 reg; | |
1876 | ||
1877 | rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); | |
1878 | rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); | |
1879 | rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); | |
1880 | rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); | |
1881 | ||
1882 | rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0); | |
1883 | rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0); | |
1884 | rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0); | |
1885 | ||
1886 | /* Wait for DMA, ignore error */ | |
1887 | rt2800usb_wait_wpdma_ready(rt2x00dev); | |
1888 | ||
1889 | rt2x00usb_disable_radio(rt2x00dev); | |
1890 | } | |
1891 | ||
1892 | static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev, | |
1893 | enum dev_state state) | |
1894 | { | |
d53d9e67 ID |
1895 | if (state == STATE_AWAKE) |
1896 | rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); | |
1897 | else | |
1898 | rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); | |
1899 | ||
1900 | return 0; | |
1901 | } | |
1902 | ||
1903 | static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev, | |
1904 | enum dev_state state) | |
1905 | { | |
1906 | int retval = 0; | |
1907 | ||
1908 | switch (state) { | |
1909 | case STATE_RADIO_ON: | |
1910 | /* | |
1911 | * Before the radio can be enabled, the device first has | |
1912 | * to be woken up. After that it needs a bit of time | |
49513481 | 1913 | * to be fully awake and then the radio can be enabled. |
d53d9e67 ID |
1914 | */ |
1915 | rt2800usb_set_state(rt2x00dev, STATE_AWAKE); | |
1916 | msleep(1); | |
1917 | retval = rt2800usb_enable_radio(rt2x00dev); | |
1918 | break; | |
1919 | case STATE_RADIO_OFF: | |
1920 | /* | |
49513481 | 1921 | * After the radio has been disabled, the device should |
d53d9e67 ID |
1922 | * be put to sleep for powersaving. |
1923 | */ | |
1924 | rt2800usb_disable_radio(rt2x00dev); | |
1925 | rt2800usb_set_state(rt2x00dev, STATE_SLEEP); | |
1926 | break; | |
1927 | case STATE_RADIO_RX_ON: | |
1928 | case STATE_RADIO_RX_ON_LINK: | |
1929 | case STATE_RADIO_RX_OFF: | |
1930 | case STATE_RADIO_RX_OFF_LINK: | |
1931 | rt2800usb_toggle_rx(rt2x00dev, state); | |
1932 | break; | |
1933 | case STATE_RADIO_IRQ_ON: | |
1934 | case STATE_RADIO_IRQ_OFF: | |
1935 | /* No support, but no error either */ | |
1936 | break; | |
1937 | case STATE_DEEP_SLEEP: | |
1938 | case STATE_SLEEP: | |
1939 | case STATE_STANDBY: | |
1940 | case STATE_AWAKE: | |
1941 | retval = rt2800usb_set_state(rt2x00dev, state); | |
1942 | break; | |
1943 | default: | |
1944 | retval = -ENOTSUPP; | |
1945 | break; | |
1946 | } | |
1947 | ||
1948 | if (unlikely(retval)) | |
1949 | ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", | |
1950 | state, retval); | |
1951 | ||
1952 | return retval; | |
1953 | } | |
1954 | ||
1955 | /* | |
1956 | * TX descriptor initialization | |
1957 | */ | |
1958 | static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, | |
1959 | struct sk_buff *skb, | |
1960 | struct txentry_desc *txdesc) | |
1961 | { | |
1962 | struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); | |
1963 | __le32 *txi = skbdesc->desc; | |
1964 | __le32 *txwi = &txi[TXINFO_DESC_SIZE / sizeof(__le32)]; | |
1965 | u32 word; | |
1966 | ||
1967 | /* | |
1968 | * Initialize TX Info descriptor | |
1969 | */ | |
1970 | rt2x00_desc_read(txwi, 0, &word); | |
1971 | rt2x00_set_field32(&word, TXWI_W0_FRAG, | |
1972 | test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); | |
1973 | rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0); | |
1974 | rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); | |
1975 | rt2x00_set_field32(&word, TXWI_W0_TS, | |
1976 | test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); | |
1977 | rt2x00_set_field32(&word, TXWI_W0_AMPDU, | |
1978 | test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags)); | |
1979 | rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density); | |
1980 | rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs); | |
1981 | rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs); | |
1982 | rt2x00_set_field32(&word, TXWI_W0_BW, | |
1983 | test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags)); | |
1984 | rt2x00_set_field32(&word, TXWI_W0_SHORT_GI, | |
1985 | test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags)); | |
1986 | rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc); | |
1987 | rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode); | |
1988 | rt2x00_desc_write(txwi, 0, word); | |
1989 | ||
1990 | rt2x00_desc_read(txwi, 1, &word); | |
1991 | rt2x00_set_field32(&word, TXWI_W1_ACK, | |
1992 | test_bit(ENTRY_TXD_ACK, &txdesc->flags)); | |
1993 | rt2x00_set_field32(&word, TXWI_W1_NSEQ, | |
1994 | test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); | |
1995 | rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size); | |
1996 | rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, | |
1997 | test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? | |
1998 | txdesc->key_idx : 0xff); | |
1999 | rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, | |
2000 | skb->len - txdesc->l2pad); | |
2001 | rt2x00_set_field32(&word, TXWI_W1_PACKETID, | |
2002 | skbdesc->entry->entry_idx); | |
2003 | rt2x00_desc_write(txwi, 1, word); | |
2004 | ||
2005 | /* | |
2006 | * Always write 0 to IV/EIV fields, hardware will insert the IV | |
2007 | * from the IVEIV register when TXINFO_W0_WIV is set to 0. | |
2008 | * When TXINFO_W0_WIV is set to 1 it will use the IV data | |
2009 | * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which | |
2010 | * crypto entry in the registers should be used to encrypt the frame. | |
2011 | */ | |
2012 | _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */); | |
2013 | _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */); | |
2014 | ||
2015 | /* | |
2016 | * Initialize TX descriptor | |
2017 | */ | |
2018 | rt2x00_desc_read(txi, 0, &word); | |
2019 | rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, | |
2020 | skb->len + TXWI_DESC_SIZE); | |
2021 | rt2x00_set_field32(&word, TXINFO_W0_WIV, | |
2022 | !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); | |
2023 | rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); | |
2024 | rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0); | |
2025 | rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0); | |
2026 | rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST, | |
2027 | test_bit(ENTRY_TXD_BURST, &txdesc->flags)); | |
2028 | rt2x00_desc_write(txi, 0, word); | |
2029 | } | |
2030 | ||
2031 | /* | |
2032 | * TX data initialization | |
2033 | */ | |
2034 | static void rt2800usb_write_beacon(struct queue_entry *entry) | |
2035 | { | |
2036 | struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; | |
2037 | struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); | |
2038 | unsigned int beacon_base; | |
2039 | u32 reg; | |
2040 | ||
2041 | /* | |
2042 | * Add the descriptor in front of the skb. | |
2043 | */ | |
2044 | skb_push(entry->skb, entry->queue->desc_size); | |
2045 | memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len); | |
2046 | skbdesc->desc = entry->skb->data; | |
2047 | ||
2048 | /* | |
2049 | * Disable beaconing while we are reloading the beacon data, | |
2050 | * otherwise we might be sending out invalid data. | |
2051 | */ | |
2052 | rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); | |
2053 | rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); | |
2054 | rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); | |
2055 | rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); | |
2056 | rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); | |
2057 | ||
2058 | /* | |
2059 | * Write entire beacon with descriptor to register. | |
2060 | */ | |
2061 | beacon_base = HW_BEACON_OFFSET(entry->entry_idx); | |
2062 | rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, | |
2063 | USB_VENDOR_REQUEST_OUT, beacon_base, | |
2064 | entry->skb->data, entry->skb->len, | |
2065 | REGISTER_TIMEOUT32(entry->skb->len)); | |
2066 | ||
2067 | /* | |
2068 | * Clean up the beacon skb. | |
2069 | */ | |
2070 | dev_kfree_skb(entry->skb); | |
2071 | entry->skb = NULL; | |
2072 | } | |
2073 | ||
2074 | static int rt2800usb_get_tx_data_len(struct queue_entry *entry) | |
2075 | { | |
2076 | int length; | |
2077 | ||
2078 | /* | |
2079 | * The length _must_ include 4 bytes padding, | |
2080 | * it should always be multiple of 4, | |
2081 | * but it must _not_ be a multiple of the USB packet size. | |
2082 | */ | |
2083 | length = roundup(entry->skb->len + 4, 4); | |
2084 | length += (4 * !(length % entry->queue->usb_maxpacket)); | |
2085 | ||
2086 | return length; | |
2087 | } | |
2088 | ||
2089 | static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, | |
2090 | const enum data_queue_qid queue) | |
2091 | { | |
2092 | u32 reg; | |
2093 | ||
2094 | if (queue != QID_BEACON) { | |
2095 | rt2x00usb_kick_tx_queue(rt2x00dev, queue); | |
2096 | return; | |
2097 | } | |
2098 | ||
2099 | rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); | |
2100 | if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) { | |
2101 | rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); | |
2102 | rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); | |
2103 | rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); | |
2104 | rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); | |
2105 | } | |
2106 | } | |
2107 | ||
2108 | /* | |
2109 | * RX control handlers | |
2110 | */ | |
2111 | static void rt2800usb_fill_rxdone(struct queue_entry *entry, | |
2112 | struct rxdone_entry_desc *rxdesc) | |
2113 | { | |
2114 | struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; | |
2115 | struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); | |
2116 | __le32 *rxd = (__le32 *)entry->skb->data; | |
2117 | __le32 *rxwi; | |
2118 | u32 rxd0; | |
2119 | u32 rxwi0; | |
2120 | u32 rxwi1; | |
2121 | u32 rxwi2; | |
2122 | u32 rxwi3; | |
2123 | ||
2124 | /* | |
2125 | * Copy descriptor to the skbdesc->desc buffer, making it safe from | |
2126 | * moving of frame data in rt2x00usb. | |
2127 | */ | |
2128 | memcpy(skbdesc->desc, rxd, skbdesc->desc_len); | |
2129 | rxd = (__le32 *)skbdesc->desc; | |
2130 | rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)]; | |
2131 | ||
2132 | /* | |
2133 | * It is now safe to read the descriptor on all architectures. | |
2134 | */ | |
2135 | rt2x00_desc_read(rxd, 0, &rxd0); | |
2136 | rt2x00_desc_read(rxwi, 0, &rxwi0); | |
2137 | rt2x00_desc_read(rxwi, 1, &rxwi1); | |
2138 | rt2x00_desc_read(rxwi, 2, &rxwi2); | |
2139 | rt2x00_desc_read(rxwi, 3, &rxwi3); | |
2140 | ||
2141 | if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR)) | |
2142 | rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; | |
2143 | ||
2144 | if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { | |
2145 | rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); | |
2146 | rxdesc->cipher_status = | |
2147 | rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR); | |
2148 | } | |
2149 | ||
2150 | if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) { | |
2151 | /* | |
2152 | * Hardware has stripped IV/EIV data from 802.11 frame during | |
2153 | * decryption. Unfortunately the descriptor doesn't contain | |
2154 | * any fields with the EIV/IV data either, so they can't | |
2155 | * be restored by rt2x00lib. | |
2156 | */ | |
2157 | rxdesc->flags |= RX_FLAG_IV_STRIPPED; | |
2158 | ||
2159 | if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) | |
2160 | rxdesc->flags |= RX_FLAG_DECRYPTED; | |
2161 | else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) | |
2162 | rxdesc->flags |= RX_FLAG_MMIC_ERROR; | |
2163 | } | |
2164 | ||
2165 | if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS)) | |
2166 | rxdesc->dev_flags |= RXDONE_MY_BSS; | |
2167 | ||
2168 | if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD)) | |
2169 | rxdesc->dev_flags |= RXDONE_L2PAD; | |
2170 | ||
2171 | if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI)) | |
2172 | rxdesc->flags |= RX_FLAG_SHORT_GI; | |
2173 | ||
2174 | if (rt2x00_get_field32(rxwi1, RXWI_W1_BW)) | |
2175 | rxdesc->flags |= RX_FLAG_40MHZ; | |
2176 | ||
2177 | /* | |
2178 | * Detect RX rate, always use MCS as signal type. | |
2179 | */ | |
2180 | rxdesc->dev_flags |= RXDONE_SIGNAL_MCS; | |
2181 | rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE); | |
2182 | rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS); | |
2183 | ||
2184 | /* | |
2185 | * Mask of 0x8 bit to remove the short preamble flag. | |
2186 | */ | |
2187 | if (rxdesc->rate_mode == RATE_MODE_CCK) | |
2188 | rxdesc->signal &= ~0x8; | |
2189 | ||
2190 | rxdesc->rssi = | |
2191 | (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) + | |
2192 | rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2; | |
2193 | ||
2194 | rxdesc->noise = | |
2195 | (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) + | |
2196 | rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2; | |
2197 | ||
2198 | rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); | |
2199 | ||
2200 | /* | |
2201 | * Remove RXWI descriptor from start of buffer. | |
2202 | */ | |
2203 | skb_pull(entry->skb, skbdesc->desc_len); | |
2204 | skb_trim(entry->skb, rxdesc->size); | |
2205 | } | |
2206 | ||
2207 | /* | |
2208 | * Device probe functions. | |
2209 | */ | |
2210 | static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) | |
2211 | { | |
2212 | u16 word; | |
2213 | u8 *mac; | |
2214 | u8 default_lna_gain; | |
2215 | ||
2216 | rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); | |
2217 | ||
2218 | /* | |
2219 | * Start validation of the data that has been read. | |
2220 | */ | |
2221 | mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); | |
2222 | if (!is_valid_ether_addr(mac)) { | |
d53d9e67 | 2223 | random_ether_addr(mac); |
e91d8334 | 2224 | EEPROM(rt2x00dev, "MAC: %pM\n", mac); |
d53d9e67 ID |
2225 | } |
2226 | ||
2227 | rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); | |
2228 | if (word == 0xffff) { | |
2229 | rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); | |
2230 | rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1); | |
2231 | rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820); | |
2232 | rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); | |
2233 | EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); | |
2234 | } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) { | |
2235 | /* | |
2236 | * There is a max of 2 RX streams for RT2870 series | |
2237 | */ | |
2238 | if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2) | |
2239 | rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); | |
2240 | rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); | |
2241 | } | |
2242 | ||
2243 | rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); | |
2244 | if (word == 0xffff) { | |
2245 | rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); | |
2246 | rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); | |
2247 | rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); | |
2248 | rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); | |
2249 | rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); | |
2250 | rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); | |
2251 | rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); | |
2252 | rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); | |
2253 | rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); | |
2254 | rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); | |
2255 | rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); | |
2256 | EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); | |
2257 | } | |
2258 | ||
2259 | rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); | |
2260 | if ((word & 0x00ff) == 0x00ff) { | |
2261 | rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); | |
2262 | rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE, | |
2263 | LED_MODE_TXRX_ACTIVITY); | |
2264 | rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0); | |
2265 | rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); | |
2266 | rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555); | |
2267 | rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221); | |
2268 | rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8); | |
2269 | EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); | |
2270 | } | |
2271 | ||
2272 | /* | |
2273 | * During the LNA validation we are going to use | |
2274 | * lna0 as correct value. Note that EEPROM_LNA | |
2275 | * is never validated. | |
2276 | */ | |
2277 | rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word); | |
2278 | default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0); | |
2279 | ||
2280 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word); | |
2281 | if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10) | |
2282 | rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0); | |
2283 | if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10) | |
2284 | rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0); | |
2285 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word); | |
2286 | ||
2287 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); | |
2288 | if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) | |
2289 | rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); | |
2290 | if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || | |
2291 | rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) | |
2292 | rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, | |
2293 | default_lna_gain); | |
2294 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word); | |
2295 | ||
2296 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word); | |
2297 | if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10) | |
2298 | rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0); | |
2299 | if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10) | |
2300 | rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0); | |
2301 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word); | |
2302 | ||
2303 | rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); | |
2304 | if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) | |
2305 | rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); | |
2306 | if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || | |
2307 | rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) | |
2308 | rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, | |
2309 | default_lna_gain); | |
2310 | rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); | |
2311 | ||
2312 | return 0; | |
2313 | } | |
2314 | ||
2315 | static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) | |
2316 | { | |
2317 | u32 reg; | |
2318 | u16 value; | |
2319 | u16 eeprom; | |
2320 | ||
2321 | /* | |
2322 | * Read EEPROM word for configuration. | |
2323 | */ | |
2324 | rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); | |
2325 | ||
2326 | /* | |
2327 | * Identify RF chipset. | |
2328 | */ | |
2329 | value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); | |
2330 | rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); | |
2331 | rt2x00_set_chip(rt2x00dev, RT2870, value, reg); | |
2332 | ||
2333 | /* | |
2334 | * The check for rt2860 is not a typo, some rt2870 hardware | |
2335 | * identifies itself as rt2860 in the CSR register. | |
2336 | */ | |
358623c2 ID |
2337 | if (!rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28600000) && |
2338 | !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28700000) && | |
2339 | !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28800000) && | |
2340 | !rt2x00_check_rev(&rt2x00dev->chip, 0xffff0000, 0x30700000)) { | |
d53d9e67 ID |
2341 | ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); |
2342 | return -ENODEV; | |
2343 | } | |
2344 | ||
2345 | if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && | |
2346 | !rt2x00_rf(&rt2x00dev->chip, RF2850) && | |
2347 | !rt2x00_rf(&rt2x00dev->chip, RF2720) && | |
2348 | !rt2x00_rf(&rt2x00dev->chip, RF2750) && | |
2349 | !rt2x00_rf(&rt2x00dev->chip, RF3020) && | |
2350 | !rt2x00_rf(&rt2x00dev->chip, RF2020)) { | |
2351 | ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); | |
2352 | return -ENODEV; | |
2353 | } | |
2354 | ||
2355 | /* | |
2356 | * Identify default antenna configuration. | |
2357 | */ | |
2358 | rt2x00dev->default_ant.tx = | |
2359 | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH); | |
2360 | rt2x00dev->default_ant.rx = | |
2361 | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH); | |
2362 | ||
2363 | /* | |
2364 | * Read frequency offset and RF programming sequence. | |
2365 | */ | |
2366 | rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); | |
2367 | rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); | |
2368 | ||
2369 | /* | |
2370 | * Read external LNA informations. | |
2371 | */ | |
2372 | rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); | |
2373 | ||
2374 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) | |
2375 | __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); | |
2376 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) | |
2377 | __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); | |
2378 | ||
2379 | /* | |
2380 | * Detect if this device has an hardware controlled radio. | |
2381 | */ | |
d53d9e67 ID |
2382 | if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO)) |
2383 | __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); | |
d53d9e67 ID |
2384 | |
2385 | /* | |
2386 | * Store led settings, for correct led behaviour. | |
2387 | */ | |
2388 | #ifdef CONFIG_RT2X00_LIB_LEDS | |
2389 | rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); | |
2390 | rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); | |
2391 | rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); | |
2392 | ||
2393 | rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, | |
2394 | &rt2x00dev->led_mcu_reg); | |
2395 | #endif /* CONFIG_RT2X00_LIB_LEDS */ | |
2396 | ||
2397 | return 0; | |
2398 | } | |
2399 | ||
2400 | /* | |
2401 | * RF value list for rt2870 | |
2402 | * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) | |
2403 | */ | |
2404 | static const struct rf_channel rf_vals[] = { | |
2405 | { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b }, | |
2406 | { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f }, | |
2407 | { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b }, | |
2408 | { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f }, | |
2409 | { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b }, | |
2410 | { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f }, | |
2411 | { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b }, | |
2412 | { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f }, | |
2413 | { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b }, | |
2414 | { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f }, | |
2415 | { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b }, | |
2416 | { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f }, | |
2417 | { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b }, | |
2418 | { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 }, | |
2419 | ||
2420 | /* 802.11 UNI / HyperLan 2 */ | |
2421 | { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 }, | |
2422 | { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 }, | |
2423 | { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 }, | |
2424 | { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 }, | |
2425 | { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b }, | |
2426 | { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b }, | |
2427 | { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 }, | |
2428 | { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 }, | |
2429 | { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b }, | |
2430 | { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 }, | |
2431 | { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 }, | |
2432 | { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 }, | |
2433 | ||
2434 | /* 802.11 HyperLan 2 */ | |
2435 | { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, | |
2436 | { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, | |
2437 | { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, | |
2438 | { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, | |
2439 | { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, | |
2440 | { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, | |
2441 | { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, | |
2442 | { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 }, | |
2443 | { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 }, | |
2444 | { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 }, | |
2445 | { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b }, | |
2446 | { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 }, | |
2447 | { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b }, | |
2448 | { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 }, | |
2449 | { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b }, | |
2450 | { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 }, | |
2451 | ||
2452 | /* 802.11 UNII */ | |
2453 | { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 }, | |
2454 | { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 }, | |
2455 | { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f }, | |
2456 | { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f }, | |
2457 | { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, | |
2458 | { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, | |
2459 | { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, | |
2460 | { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, | |
2461 | { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, | |
2462 | { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, | |
2463 | { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, | |
2464 | ||
2465 | /* 802.11 Japan */ | |
2466 | { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, | |
2467 | { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 }, | |
2468 | { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b }, | |
2469 | { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 }, | |
2470 | { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 }, | |
2471 | { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b }, | |
2472 | { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, | |
2473 | }; | |
2474 | ||
2475 | /* | |
2476 | * RF value list for rt3070 | |
2477 | * Supports: 2.4 GHz | |
2478 | */ | |
2479 | static const struct rf_channel rf_vals_3070[] = { | |
2480 | {1, 241, 2, 2 }, | |
2481 | {2, 241, 2, 7 }, | |
2482 | {3, 242, 2, 2 }, | |
2483 | {4, 242, 2, 7 }, | |
2484 | {5, 243, 2, 2 }, | |
2485 | {6, 243, 2, 7 }, | |
2486 | {7, 244, 2, 2 }, | |
2487 | {8, 244, 2, 7 }, | |
2488 | {9, 245, 2, 2 }, | |
2489 | {10, 245, 2, 7 }, | |
2490 | {11, 246, 2, 2 }, | |
2491 | {12, 246, 2, 7 }, | |
2492 | {13, 247, 2, 2 }, | |
2493 | {14, 248, 2, 4 }, | |
2494 | }; | |
2495 | ||
2496 | static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) | |
2497 | { | |
2498 | struct hw_mode_spec *spec = &rt2x00dev->spec; | |
2499 | struct channel_info *info; | |
2500 | char *tx_power1; | |
2501 | char *tx_power2; | |
2502 | unsigned int i; | |
2503 | u16 eeprom; | |
2504 | ||
2505 | /* | |
2506 | * Initialize all hw fields. | |
2507 | */ | |
2508 | rt2x00dev->hw->flags = | |
2509 | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | | |
2510 | IEEE80211_HW_SIGNAL_DBM | | |
2511 | IEEE80211_HW_SUPPORTS_PS | | |
2512 | IEEE80211_HW_PS_NULLFUNC_STACK; | |
2513 | rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE; | |
2514 | ||
2515 | SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); | |
2516 | SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, | |
2517 | rt2x00_eeprom_addr(rt2x00dev, | |
2518 | EEPROM_MAC_ADDR_0)); | |
2519 | ||
2520 | rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); | |
2521 | ||
2522 | /* | |
2523 | * Initialize HT information. | |
2524 | */ | |
2525 | spec->ht.ht_supported = true; | |
2526 | spec->ht.cap = | |
2527 | IEEE80211_HT_CAP_SUP_WIDTH_20_40 | | |
2528 | IEEE80211_HT_CAP_GRN_FLD | | |
2529 | IEEE80211_HT_CAP_SGI_20 | | |
2530 | IEEE80211_HT_CAP_SGI_40 | | |
2531 | IEEE80211_HT_CAP_TX_STBC | | |
2532 | IEEE80211_HT_CAP_RX_STBC | | |
2533 | IEEE80211_HT_CAP_PSMP_SUPPORT; | |
2534 | spec->ht.ampdu_factor = 3; | |
2535 | spec->ht.ampdu_density = 4; | |
2536 | spec->ht.mcs.tx_params = | |
2537 | IEEE80211_HT_MCS_TX_DEFINED | | |
2538 | IEEE80211_HT_MCS_TX_RX_DIFF | | |
2539 | ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) << | |
2540 | IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); | |
2541 | ||
2542 | switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) { | |
2543 | case 3: | |
2544 | spec->ht.mcs.rx_mask[2] = 0xff; | |
2545 | case 2: | |
2546 | spec->ht.mcs.rx_mask[1] = 0xff; | |
2547 | case 1: | |
2548 | spec->ht.mcs.rx_mask[0] = 0xff; | |
2549 | spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */ | |
2550 | break; | |
2551 | } | |
2552 | ||
2553 | /* | |
2554 | * Initialize hw_mode information. | |
2555 | */ | |
2556 | spec->supported_bands = SUPPORT_BAND_2GHZ; | |
2557 | spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; | |
2558 | ||
2559 | if (rt2x00_rf(&rt2x00dev->chip, RF2820) || | |
2560 | rt2x00_rf(&rt2x00dev->chip, RF2720)) { | |
2561 | spec->num_channels = 14; | |
2562 | spec->channels = rf_vals; | |
2563 | } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || | |
2564 | rt2x00_rf(&rt2x00dev->chip, RF2750)) { | |
2565 | spec->supported_bands |= SUPPORT_BAND_5GHZ; | |
2566 | spec->num_channels = ARRAY_SIZE(rf_vals); | |
2567 | spec->channels = rf_vals; | |
2568 | } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) || | |
2569 | rt2x00_rf(&rt2x00dev->chip, RF2020)) { | |
2570 | spec->num_channels = ARRAY_SIZE(rf_vals_3070); | |
2571 | spec->channels = rf_vals_3070; | |
2572 | } | |
2573 | ||
2574 | /* | |
2575 | * Create channel information array | |
2576 | */ | |
2577 | info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); | |
2578 | if (!info) | |
2579 | return -ENOMEM; | |
2580 | ||
2581 | spec->channels_info = info; | |
2582 | ||
2583 | tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); | |
2584 | tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); | |
2585 | ||
2586 | for (i = 0; i < 14; i++) { | |
2587 | info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]); | |
2588 | info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]); | |
2589 | } | |
2590 | ||
2591 | if (spec->num_channels > 14) { | |
2592 | tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); | |
2593 | tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); | |
2594 | ||
2595 | for (i = 14; i < spec->num_channels; i++) { | |
2596 | info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]); | |
2597 | info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]); | |
2598 | } | |
2599 | } | |
2600 | ||
2601 | return 0; | |
2602 | } | |
2603 | ||
2604 | static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) | |
2605 | { | |
2606 | int retval; | |
2607 | ||
2608 | /* | |
2609 | * Allocate eeprom data. | |
2610 | */ | |
2611 | retval = rt2800usb_validate_eeprom(rt2x00dev); | |
2612 | if (retval) | |
2613 | return retval; | |
2614 | ||
2615 | retval = rt2800usb_init_eeprom(rt2x00dev); | |
2616 | if (retval) | |
2617 | return retval; | |
2618 | ||
2619 | /* | |
2620 | * Initialize hw specifications. | |
2621 | */ | |
2622 | retval = rt2800usb_probe_hw_mode(rt2x00dev); | |
2623 | if (retval) | |
2624 | return retval; | |
2625 | ||
2626 | /* | |
2627 | * This device requires firmware. | |
2628 | */ | |
2629 | __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); | |
2630 | __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); | |
2631 | __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags); | |
2632 | if (!modparam_nohwcrypt) | |
2633 | __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); | |
2634 | ||
2635 | /* | |
2636 | * Set the rssi offset. | |
2637 | */ | |
2638 | rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; | |
2639 | ||
2640 | return 0; | |
2641 | } | |
2642 | ||
2643 | /* | |
2644 | * IEEE80211 stack callback functions. | |
2645 | */ | |
2646 | static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, | |
2647 | u32 *iv32, u16 *iv16) | |
2648 | { | |
2649 | struct rt2x00_dev *rt2x00dev = hw->priv; | |
2650 | struct mac_iveiv_entry iveiv_entry; | |
2651 | u32 offset; | |
2652 | ||
2653 | offset = MAC_IVEIV_ENTRY(hw_key_idx); | |
2654 | rt2x00usb_register_multiread(rt2x00dev, offset, | |
2655 | &iveiv_entry, sizeof(iveiv_entry)); | |
2656 | ||
2657 | memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); | |
2658 | memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); | |
2659 | } | |
2660 | ||
2661 | static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value) | |
2662 | { | |
2663 | struct rt2x00_dev *rt2x00dev = hw->priv; | |
2664 | u32 reg; | |
2665 | bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); | |
2666 | ||
2667 | rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); | |
2668 | rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); | |
2669 | rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); | |
2670 | ||
2671 | rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); | |
2672 | rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); | |
2673 | rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); | |
2674 | ||
2675 | rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); | |
2676 | rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); | |
2677 | rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); | |
2678 | ||
2679 | rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); | |
2680 | rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); | |
2681 | rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); | |
2682 | ||
2683 | rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); | |
2684 | rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); | |
2685 | rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); | |
2686 | ||
2687 | rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); | |
2688 | rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); | |
2689 | rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); | |
2690 | ||
2691 | rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); | |
2692 | rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); | |
2693 | rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); | |
2694 | ||
2695 | return 0; | |
2696 | } | |
2697 | ||
2698 | static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, | |
2699 | const struct ieee80211_tx_queue_params *params) | |
2700 | { | |
2701 | struct rt2x00_dev *rt2x00dev = hw->priv; | |
2702 | struct data_queue *queue; | |
2703 | struct rt2x00_field32 field; | |
2704 | int retval; | |
2705 | u32 reg; | |
2706 | u32 offset; | |
2707 | ||
2708 | /* | |
2709 | * First pass the configuration through rt2x00lib, that will | |
2710 | * update the queue settings and validate the input. After that | |
2711 | * we are free to update the registers based on the value | |
2712 | * in the queue parameter. | |
2713 | */ | |
2714 | retval = rt2x00mac_conf_tx(hw, queue_idx, params); | |
2715 | if (retval) | |
2716 | return retval; | |
2717 | ||
2718 | /* | |
2719 | * We only need to perform additional register initialization | |
2720 | * for WMM queues/ | |
2721 | */ | |
2722 | if (queue_idx >= 4) | |
2723 | return 0; | |
2724 | ||
2725 | queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); | |
2726 | ||
2727 | /* Update WMM TXOP register */ | |
2728 | offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); | |
2729 | field.bit_offset = (queue_idx & 1) * 16; | |
2730 | field.bit_mask = 0xffff << field.bit_offset; | |
2731 | ||
2732 | rt2x00usb_register_read(rt2x00dev, offset, ®); | |
2733 | rt2x00_set_field32(®, field, queue->txop); | |
2734 | rt2x00usb_register_write(rt2x00dev, offset, reg); | |
2735 | ||
2736 | /* Update WMM registers */ | |
2737 | field.bit_offset = queue_idx * 4; | |
2738 | field.bit_mask = 0xf << field.bit_offset; | |
2739 | ||
2740 | rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, ®); | |
2741 | rt2x00_set_field32(®, field, queue->aifs); | |
2742 | rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); | |
2743 | ||
2744 | rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, ®); | |
2745 | rt2x00_set_field32(®, field, queue->cw_min); | |
2746 | rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); | |
2747 | ||
2748 | rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, ®); | |
2749 | rt2x00_set_field32(®, field, queue->cw_max); | |
2750 | rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); | |
2751 | ||
2752 | /* Update EDCA registers */ | |
2753 | offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); | |
2754 | ||
2755 | rt2x00usb_register_read(rt2x00dev, offset, ®); | |
2756 | rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); | |
2757 | rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); | |
2758 | rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); | |
2759 | rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); | |
2760 | rt2x00usb_register_write(rt2x00dev, offset, reg); | |
2761 | ||
2762 | return 0; | |
2763 | } | |
2764 | ||
2765 | static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw) | |
2766 | { | |
2767 | struct rt2x00_dev *rt2x00dev = hw->priv; | |
2768 | u64 tsf; | |
2769 | u32 reg; | |
2770 | ||
2771 | rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, ®); | |
2772 | tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; | |
2773 | rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, ®); | |
2774 | tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); | |
2775 | ||
2776 | return tsf; | |
2777 | } | |
2778 | ||
2779 | static const struct ieee80211_ops rt2800usb_mac80211_ops = { | |
2780 | .tx = rt2x00mac_tx, | |
2781 | .start = rt2x00mac_start, | |
2782 | .stop = rt2x00mac_stop, | |
2783 | .add_interface = rt2x00mac_add_interface, | |
2784 | .remove_interface = rt2x00mac_remove_interface, | |
2785 | .config = rt2x00mac_config, | |
2786 | .configure_filter = rt2x00mac_configure_filter, | |
930c06f2 | 2787 | .set_tim = rt2x00mac_set_tim, |
d53d9e67 ID |
2788 | .set_key = rt2x00mac_set_key, |
2789 | .get_stats = rt2x00mac_get_stats, | |
2790 | .get_tkip_seq = rt2800usb_get_tkip_seq, | |
2791 | .set_rts_threshold = rt2800usb_set_rts_threshold, | |
2792 | .bss_info_changed = rt2x00mac_bss_info_changed, | |
2793 | .conf_tx = rt2800usb_conf_tx, | |
2794 | .get_tx_stats = rt2x00mac_get_tx_stats, | |
2795 | .get_tsf = rt2800usb_get_tsf, | |
e47a5cdd | 2796 | .rfkill_poll = rt2x00mac_rfkill_poll, |
d53d9e67 ID |
2797 | }; |
2798 | ||
2799 | static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { | |
2800 | .probe_hw = rt2800usb_probe_hw, | |
2801 | .get_firmware_name = rt2800usb_get_firmware_name, | |
2802 | .check_firmware = rt2800usb_check_firmware, | |
2803 | .load_firmware = rt2800usb_load_firmware, | |
2804 | .initialize = rt2x00usb_initialize, | |
2805 | .uninitialize = rt2x00usb_uninitialize, | |
2806 | .clear_entry = rt2x00usb_clear_entry, | |
2807 | .set_device_state = rt2800usb_set_device_state, | |
2808 | .rfkill_poll = rt2800usb_rfkill_poll, | |
2809 | .link_stats = rt2800usb_link_stats, | |
2810 | .reset_tuner = rt2800usb_reset_tuner, | |
2811 | .link_tuner = rt2800usb_link_tuner, | |
2812 | .write_tx_desc = rt2800usb_write_tx_desc, | |
2813 | .write_tx_data = rt2x00usb_write_tx_data, | |
2814 | .write_beacon = rt2800usb_write_beacon, | |
2815 | .get_tx_data_len = rt2800usb_get_tx_data_len, | |
2816 | .kick_tx_queue = rt2800usb_kick_tx_queue, | |
2817 | .kill_tx_queue = rt2x00usb_kill_tx_queue, | |
2818 | .fill_rxdone = rt2800usb_fill_rxdone, | |
2819 | .config_shared_key = rt2800usb_config_shared_key, | |
2820 | .config_pairwise_key = rt2800usb_config_pairwise_key, | |
2821 | .config_filter = rt2800usb_config_filter, | |
2822 | .config_intf = rt2800usb_config_intf, | |
2823 | .config_erp = rt2800usb_config_erp, | |
2824 | .config_ant = rt2800usb_config_ant, | |
2825 | .config = rt2800usb_config, | |
2826 | }; | |
2827 | ||
2828 | static const struct data_queue_desc rt2800usb_queue_rx = { | |
2829 | .entry_num = RX_ENTRIES, | |
2830 | .data_size = AGGREGATION_SIZE, | |
2831 | .desc_size = RXD_DESC_SIZE + RXWI_DESC_SIZE, | |
2832 | .priv_size = sizeof(struct queue_entry_priv_usb), | |
2833 | }; | |
2834 | ||
2835 | static const struct data_queue_desc rt2800usb_queue_tx = { | |
2836 | .entry_num = TX_ENTRIES, | |
2837 | .data_size = AGGREGATION_SIZE, | |
2838 | .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE, | |
2839 | .priv_size = sizeof(struct queue_entry_priv_usb), | |
2840 | }; | |
2841 | ||
2842 | static const struct data_queue_desc rt2800usb_queue_bcn = { | |
2843 | .entry_num = 8 * BEACON_ENTRIES, | |
2844 | .data_size = MGMT_FRAME_SIZE, | |
2845 | .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE, | |
2846 | .priv_size = sizeof(struct queue_entry_priv_usb), | |
2847 | }; | |
2848 | ||
2849 | static const struct rt2x00_ops rt2800usb_ops = { | |
2850 | .name = KBUILD_MODNAME, | |
2851 | .max_sta_intf = 1, | |
2852 | .max_ap_intf = 8, | |
2853 | .eeprom_size = EEPROM_SIZE, | |
2854 | .rf_size = RF_SIZE, | |
2855 | .tx_queues = NUM_TX_QUEUES, | |
2856 | .rx = &rt2800usb_queue_rx, | |
2857 | .tx = &rt2800usb_queue_tx, | |
2858 | .bcn = &rt2800usb_queue_bcn, | |
2859 | .lib = &rt2800usb_rt2x00_ops, | |
2860 | .hw = &rt2800usb_mac80211_ops, | |
2861 | #ifdef CONFIG_RT2X00_LIB_DEBUGFS | |
2862 | .debugfs = &rt2800usb_rt2x00debug, | |
2863 | #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ | |
2864 | }; | |
2865 | ||
2866 | /* | |
2867 | * rt2800usb module information. | |
2868 | */ | |
2869 | static struct usb_device_id rt2800usb_device_table[] = { | |
d53d9e67 ID |
2870 | /* Abocom */ |
2871 | { USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2872 | { USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2873 | { USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2874 | { USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2875 | { USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2876 | { USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2877 | /* AirTies */ | |
2878 | { USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2879 | /* Amigo */ | |
2880 | { USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2881 | { USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2882 | /* Amit */ | |
2883 | { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2884 | /* ASUS */ | |
2885 | { USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2886 | { USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2887 | { USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2888 | { USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2889 | { USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2890 | /* AzureWave */ | |
2891 | { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2892 | { USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2893 | { USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2894 | { USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2895 | /* Belkin */ | |
2896 | { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2897 | { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2898 | { USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2c617b03 | 2899 | { USB_DEVICE(0x050d, 0x825a), USB_DEVICE_DATA(&rt2800usb_ops) }, |
d53d9e67 ID |
2900 | /* Buffalo */ |
2901 | { USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2902 | { USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2903 | /* Conceptronic */ | |
2904 | { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2905 | { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2906 | { USB_DEVICE(0x14b2, 0x3c08), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2907 | { USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2908 | { USB_DEVICE(0x14b2, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2909 | { USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2910 | { USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2911 | { USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2912 | { USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2913 | { USB_DEVICE(0x14b2, 0x3c28), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2914 | /* Corega */ | |
2915 | { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2916 | { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2917 | { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2918 | { USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2919 | { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2920 | /* D-Link */ | |
2921 | { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2922 | { USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2923 | { USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
ce2ebc9b ID |
2924 | { USB_DEVICE(0x07d1, 0x3c0d), USB_DEVICE_DATA(&rt2800usb_ops) }, |
2925 | { USB_DEVICE(0x07d1, 0x3c0e), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2926 | { USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
d53d9e67 ID |
2927 | { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) }, |
2928 | { USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2929 | /* Edimax */ | |
2930 | { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2931 | { USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2932 | { USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
ce2ebc9b ID |
2933 | /* Encore */ |
2934 | { USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
d53d9e67 ID |
2935 | /* EnGenius */ |
2936 | { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2937 | { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2938 | { USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2939 | { USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2940 | { USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2941 | { USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2942 | /* Gemtek */ | |
2943 | { USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2944 | /* Gigabyte */ | |
2945 | { USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2946 | { USB_DEVICE(0x1044, 0x800c), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2947 | { USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2948 | /* Hawking */ | |
2949 | { USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2950 | { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2951 | { USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2952 | { USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
ce2ebc9b ID |
2953 | /* I-O DATA */ |
2954 | { USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
d53d9e67 ID |
2955 | /* LevelOne */ |
2956 | { USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2957 | { USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2958 | /* Linksys */ | |
2959 | { USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2960 | { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
e430d607 | 2961 | { USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) }, |
d53d9e67 ID |
2962 | /* Logitec */ |
2963 | { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2964 | { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2965 | { USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2966 | /* Motorola */ | |
2967 | { USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2968 | { USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2969 | /* Ovislink */ | |
2970 | { USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2971 | /* Pegatron */ | |
2972 | { USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2973 | { USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
ce2ebc9b | 2974 | { USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) }, |
d53d9e67 ID |
2975 | /* Philips */ |
2976 | { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2977 | /* Planex */ | |
2978 | { USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2979 | { USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2980 | { USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2981 | /* Qcom */ | |
2982 | { USB_DEVICE(0x18e8, 0x6259), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2983 | /* Quanta */ | |
2984 | { USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2985 | /* Ralink */ | |
ce2ebc9b | 2986 | { USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) }, |
d53d9e67 ID |
2987 | { USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) }, |
2988 | { USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2989 | { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2990 | { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2991 | { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2992 | { USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2993 | { USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2994 | { USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2995 | /* Samsung */ | |
2996 | { USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2997 | /* Siemens */ | |
2998 | { USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
2999 | /* Sitecom */ | |
3000 | { USB_DEVICE(0x0df6, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3001 | { USB_DEVICE(0x0df6, 0x002b), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3002 | { USB_DEVICE(0x0df6, 0x002c), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3003 | { USB_DEVICE(0x0df6, 0x002d), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3004 | { USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3005 | { USB_DEVICE(0x0df6, 0x003b), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3006 | { USB_DEVICE(0x0df6, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3007 | { USB_DEVICE(0x0df6, 0x003d), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3008 | { USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3009 | { USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3010 | { USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
ce2ebc9b | 3011 | { USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) }, |
d53d9e67 ID |
3012 | /* SMC */ |
3013 | { USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3014 | { USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3015 | { USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3016 | { USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3017 | { USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3018 | { USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3019 | { USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3020 | { USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3021 | { USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3022 | /* Sparklan */ | |
3023 | { USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3b91c360 ID |
3024 | /* Sweex */ |
3025 | { USB_DEVICE(0x177f, 0x0153), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3026 | { USB_DEVICE(0x177f, 0x0302), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3027 | { USB_DEVICE(0x177f, 0x0313), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
d53d9e67 ID |
3028 | /* U-Media*/ |
3029 | { USB_DEVICE(0x157e, 0x300e), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3030 | /* ZCOM */ | |
3031 | { USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3032 | { USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3033 | /* Zinwell */ | |
3034 | { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3035 | { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
ce2ebc9b ID |
3036 | { USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) }, |
3037 | { USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
d53d9e67 ID |
3038 | /* Zyxel */ |
3039 | { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3040 | { USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) }, | |
3041 | { 0, } | |
3042 | }; | |
3043 | ||
3044 | MODULE_AUTHOR(DRV_PROJECT); | |
3045 | MODULE_VERSION(DRV_VERSION); | |
3046 | MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver."); | |
3047 | MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards"); | |
3048 | MODULE_DEVICE_TABLE(usb, rt2800usb_device_table); | |
3049 | MODULE_FIRMWARE(FIRMWARE_RT2870); | |
3050 | MODULE_LICENSE("GPL"); | |
3051 | ||
3052 | static struct usb_driver rt2800usb_driver = { | |
3053 | .name = KBUILD_MODNAME, | |
3054 | .id_table = rt2800usb_device_table, | |
3055 | .probe = rt2x00usb_probe, | |
3056 | .disconnect = rt2x00usb_disconnect, | |
3057 | .suspend = rt2x00usb_suspend, | |
3058 | .resume = rt2x00usb_resume, | |
3059 | }; | |
3060 | ||
3061 | static int __init rt2800usb_init(void) | |
3062 | { | |
3063 | return usb_register(&rt2800usb_driver); | |
3064 | } | |
3065 | ||
3066 | static void __exit rt2800usb_exit(void) | |
3067 | { | |
3068 | usb_deregister(&rt2800usb_driver); | |
3069 | } | |
3070 | ||
3071 | module_init(rt2800usb_init); | |
3072 | module_exit(rt2800usb_exit); |