]>
Commit | Line | Data |
---|---|---|
605bebe2 MW |
1 | /* |
2 | * Linux device driver for RTL8187 | |
3 | * | |
4 | * Copyright 2007 Michael Wu <flamingice@sourmilk.net> | |
5 | * Copyright 2007 Andrea Merello <andreamrl@tiscali.it> | |
6 | * | |
7 | * Based on the r8187 driver, which is: | |
8 | * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al. | |
9 | * | |
0aec00ae JL |
10 | * Magic delays and register offsets below are taken from the original |
11 | * r8187 driver sources. Thanks to Realtek for their support! | |
605bebe2 MW |
12 | * |
13 | * This program is free software; you can redistribute it and/or modify | |
14 | * it under the terms of the GNU General Public License version 2 as | |
15 | * published by the Free Software Foundation. | |
16 | */ | |
17 | ||
18 | #include <linux/init.h> | |
19 | #include <linux/usb.h> | |
20 | #include <linux/delay.h> | |
21 | #include <linux/etherdevice.h> | |
22 | #include <linux/eeprom_93cx6.h> | |
23 | #include <net/mac80211.h> | |
24 | ||
25 | #include "rtl8187.h" | |
26 | #include "rtl8187_rtl8225.h" | |
27 | ||
28 | MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); | |
29 | MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>"); | |
30 | MODULE_DESCRIPTION("RTL8187 USB wireless driver"); | |
31 | MODULE_LICENSE("GPL"); | |
32 | ||
33 | static struct usb_device_id rtl8187_table[] __devinitdata = { | |
34 | /* Realtek */ | |
35 | {USB_DEVICE(0x0bda, 0x8187)}, | |
36 | /* Netgear */ | |
37 | {USB_DEVICE(0x0846, 0x6100)}, | |
38 | {USB_DEVICE(0x0846, 0x6a00)}, | |
c3cf60a9 MW |
39 | /* HP */ |
40 | {USB_DEVICE(0x03f0, 0xca02)}, | |
9934550d MM |
41 | /* Sitecom */ |
42 | {USB_DEVICE(0x0df6, 0x000d)}, | |
605bebe2 MW |
43 | {} |
44 | }; | |
45 | ||
46 | MODULE_DEVICE_TABLE(usb, rtl8187_table); | |
47 | ||
8318d78a JB |
48 | static const struct ieee80211_rate rtl818x_rates[] = { |
49 | { .bitrate = 10, .hw_value = 0, }, | |
50 | { .bitrate = 20, .hw_value = 1, }, | |
51 | { .bitrate = 55, .hw_value = 2, }, | |
52 | { .bitrate = 110, .hw_value = 3, }, | |
53 | { .bitrate = 60, .hw_value = 4, }, | |
54 | { .bitrate = 90, .hw_value = 5, }, | |
55 | { .bitrate = 120, .hw_value = 6, }, | |
56 | { .bitrate = 180, .hw_value = 7, }, | |
57 | { .bitrate = 240, .hw_value = 8, }, | |
58 | { .bitrate = 360, .hw_value = 9, }, | |
59 | { .bitrate = 480, .hw_value = 10, }, | |
60 | { .bitrate = 540, .hw_value = 11, }, | |
61 | }; | |
62 | ||
63 | static const struct ieee80211_channel rtl818x_channels[] = { | |
64 | { .center_freq = 2412 }, | |
65 | { .center_freq = 2417 }, | |
66 | { .center_freq = 2422 }, | |
67 | { .center_freq = 2427 }, | |
68 | { .center_freq = 2432 }, | |
69 | { .center_freq = 2437 }, | |
70 | { .center_freq = 2442 }, | |
71 | { .center_freq = 2447 }, | |
72 | { .center_freq = 2452 }, | |
73 | { .center_freq = 2457 }, | |
74 | { .center_freq = 2462 }, | |
75 | { .center_freq = 2467 }, | |
76 | { .center_freq = 2472 }, | |
77 | { .center_freq = 2484 }, | |
78 | }; | |
79 | ||
4150c572 JB |
80 | static void rtl8187_iowrite_async_cb(struct urb *urb) |
81 | { | |
82 | kfree(urb->context); | |
83 | usb_free_urb(urb); | |
84 | } | |
85 | ||
86 | static void rtl8187_iowrite_async(struct rtl8187_priv *priv, __le16 addr, | |
87 | void *data, u16 len) | |
88 | { | |
89 | struct usb_ctrlrequest *dr; | |
90 | struct urb *urb; | |
91 | struct rtl8187_async_write_data { | |
92 | u8 data[4]; | |
93 | struct usb_ctrlrequest dr; | |
94 | } *buf; | |
95 | ||
96 | buf = kmalloc(sizeof(*buf), GFP_ATOMIC); | |
97 | if (!buf) | |
98 | return; | |
99 | ||
100 | urb = usb_alloc_urb(0, GFP_ATOMIC); | |
101 | if (!urb) { | |
102 | kfree(buf); | |
103 | return; | |
104 | } | |
105 | ||
106 | dr = &buf->dr; | |
107 | ||
108 | dr->bRequestType = RTL8187_REQT_WRITE; | |
109 | dr->bRequest = RTL8187_REQ_SET_REG; | |
110 | dr->wValue = addr; | |
111 | dr->wIndex = 0; | |
112 | dr->wLength = cpu_to_le16(len); | |
113 | ||
114 | memcpy(buf, data, len); | |
115 | ||
116 | usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0), | |
117 | (unsigned char *)dr, buf, len, | |
118 | rtl8187_iowrite_async_cb, buf); | |
119 | usb_submit_urb(urb, GFP_ATOMIC); | |
120 | } | |
121 | ||
122 | static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv, | |
123 | __le32 *addr, u32 val) | |
124 | { | |
125 | __le32 buf = cpu_to_le32(val); | |
126 | ||
127 | rtl8187_iowrite_async(priv, cpu_to_le16((unsigned long)addr), | |
128 | &buf, sizeof(buf)); | |
129 | } | |
130 | ||
605bebe2 MW |
131 | void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data) |
132 | { | |
133 | struct rtl8187_priv *priv = dev->priv; | |
134 | ||
135 | data <<= 8; | |
136 | data |= addr | 0x80; | |
137 | ||
138 | rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF); | |
139 | rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF); | |
140 | rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF); | |
141 | rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF); | |
142 | ||
143 | msleep(1); | |
144 | } | |
145 | ||
146 | static void rtl8187_tx_cb(struct urb *urb) | |
147 | { | |
1955fd0b | 148 | struct ieee80211_tx_status status; |
605bebe2 MW |
149 | struct sk_buff *skb = (struct sk_buff *)urb->context; |
150 | struct rtl8187_tx_info *info = (struct rtl8187_tx_info *)skb->cb; | |
151 | ||
1955fd0b JB |
152 | memset(&status, 0, sizeof(status)); |
153 | ||
605bebe2 MW |
154 | usb_free_urb(info->urb); |
155 | if (info->control) | |
156 | memcpy(&status.control, info->control, sizeof(status.control)); | |
157 | kfree(info->control); | |
158 | skb_pull(skb, sizeof(struct rtl8187_tx_hdr)); | |
159 | status.flags |= IEEE80211_TX_STATUS_ACK; | |
160 | ieee80211_tx_status_irqsafe(info->dev, skb, &status); | |
161 | } | |
162 | ||
163 | static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb, | |
164 | struct ieee80211_tx_control *control) | |
165 | { | |
166 | struct rtl8187_priv *priv = dev->priv; | |
167 | struct rtl8187_tx_hdr *hdr; | |
168 | struct rtl8187_tx_info *info; | |
169 | struct urb *urb; | |
98798f48 MW |
170 | __le16 rts_dur = 0; |
171 | u32 flags; | |
605bebe2 MW |
172 | |
173 | urb = usb_alloc_urb(0, GFP_ATOMIC); | |
174 | if (!urb) { | |
175 | kfree_skb(skb); | |
176 | return 0; | |
177 | } | |
178 | ||
98798f48 MW |
179 | flags = skb->len; |
180 | flags |= RTL8187_TX_FLAG_NO_ENCRYPT; | |
8318d78a JB |
181 | flags |= control->rts_cts_rate->hw_value << 19; |
182 | flags |= control->tx_rate->hw_value << 24; | |
98798f48 MW |
183 | if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb->data)) |
184 | flags |= RTL8187_TX_FLAG_MORE_FRAG; | |
605bebe2 | 185 | if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) { |
98798f48 | 186 | flags |= RTL8187_TX_FLAG_RTS; |
32bfd35d JB |
187 | rts_dur = ieee80211_rts_duration(dev, priv->vif, |
188 | skb->len, control); | |
605bebe2 MW |
189 | } |
190 | if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) | |
98798f48 MW |
191 | flags |= RTL8187_TX_FLAG_CTS; |
192 | ||
193 | hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr)); | |
194 | hdr->flags = cpu_to_le32(flags); | |
605bebe2 | 195 | hdr->len = 0; |
98798f48 MW |
196 | hdr->rts_duration = rts_dur; |
197 | hdr->retry = cpu_to_le32(control->retry_limit << 8); | |
605bebe2 MW |
198 | |
199 | info = (struct rtl8187_tx_info *)skb->cb; | |
200 | info->control = kmemdup(control, sizeof(*control), GFP_ATOMIC); | |
201 | info->urb = urb; | |
202 | info->dev = dev; | |
203 | usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2), | |
204 | hdr, skb->len, rtl8187_tx_cb, skb); | |
205 | usb_submit_urb(urb, GFP_ATOMIC); | |
206 | ||
207 | return 0; | |
208 | } | |
209 | ||
210 | static void rtl8187_rx_cb(struct urb *urb) | |
211 | { | |
212 | struct sk_buff *skb = (struct sk_buff *)urb->context; | |
213 | struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb; | |
214 | struct ieee80211_hw *dev = info->dev; | |
215 | struct rtl8187_priv *priv = dev->priv; | |
216 | struct rtl8187_rx_hdr *hdr; | |
217 | struct ieee80211_rx_status rx_status = { 0 }; | |
218 | int rate, signal; | |
4150c572 | 219 | u32 flags; |
605bebe2 MW |
220 | |
221 | spin_lock(&priv->rx_queue.lock); | |
222 | if (skb->next) | |
223 | __skb_unlink(skb, &priv->rx_queue); | |
224 | else { | |
225 | spin_unlock(&priv->rx_queue.lock); | |
226 | return; | |
227 | } | |
228 | spin_unlock(&priv->rx_queue.lock); | |
229 | ||
230 | if (unlikely(urb->status)) { | |
231 | usb_free_urb(urb); | |
232 | dev_kfree_skb_irq(skb); | |
233 | return; | |
234 | } | |
235 | ||
236 | skb_put(skb, urb->actual_length); | |
237 | hdr = (struct rtl8187_rx_hdr *)(skb_tail_pointer(skb) - sizeof(*hdr)); | |
4150c572 JB |
238 | flags = le32_to_cpu(hdr->flags); |
239 | skb_trim(skb, flags & 0x0FFF); | |
605bebe2 MW |
240 | |
241 | signal = hdr->agc >> 1; | |
4150c572 | 242 | rate = (flags >> 20) & 0xF; |
605bebe2 MW |
243 | if (rate > 3) { /* OFDM rate */ |
244 | if (signal > 90) | |
245 | signal = 90; | |
246 | else if (signal < 25) | |
247 | signal = 25; | |
248 | signal = 90 - signal; | |
249 | } else { /* CCK rate */ | |
250 | if (signal > 95) | |
251 | signal = 95; | |
252 | else if (signal < 30) | |
253 | signal = 30; | |
254 | signal = 95 - signal; | |
255 | } | |
256 | ||
257 | rx_status.antenna = (hdr->signal >> 7) & 1; | |
258 | rx_status.signal = 64 - min(hdr->noise, (u8)64); | |
259 | rx_status.ssi = signal; | |
8318d78a JB |
260 | rx_status.rate_idx = rate; |
261 | rx_status.freq = dev->conf.channel->center_freq; | |
262 | rx_status.band = dev->conf.channel->band; | |
605bebe2 | 263 | rx_status.mactime = le64_to_cpu(hdr->mac_time); |
03bffc13 | 264 | rx_status.flag |= RX_FLAG_TSFT; |
4150c572 JB |
265 | if (flags & (1 << 13)) |
266 | rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; | |
605bebe2 MW |
267 | ieee80211_rx_irqsafe(dev, skb, &rx_status); |
268 | ||
269 | skb = dev_alloc_skb(RTL8187_MAX_RX); | |
270 | if (unlikely(!skb)) { | |
271 | usb_free_urb(urb); | |
272 | /* TODO check rx queue length and refill *somewhere* */ | |
273 | return; | |
274 | } | |
275 | ||
276 | info = (struct rtl8187_rx_info *)skb->cb; | |
277 | info->urb = urb; | |
278 | info->dev = dev; | |
279 | urb->transfer_buffer = skb_tail_pointer(skb); | |
280 | urb->context = skb; | |
281 | skb_queue_tail(&priv->rx_queue, skb); | |
282 | ||
283 | usb_submit_urb(urb, GFP_ATOMIC); | |
284 | } | |
285 | ||
286 | static int rtl8187_init_urbs(struct ieee80211_hw *dev) | |
287 | { | |
288 | struct rtl8187_priv *priv = dev->priv; | |
289 | struct urb *entry; | |
290 | struct sk_buff *skb; | |
291 | struct rtl8187_rx_info *info; | |
292 | ||
293 | while (skb_queue_len(&priv->rx_queue) < 8) { | |
294 | skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL); | |
295 | if (!skb) | |
296 | break; | |
297 | entry = usb_alloc_urb(0, GFP_KERNEL); | |
298 | if (!entry) { | |
299 | kfree_skb(skb); | |
300 | break; | |
301 | } | |
302 | usb_fill_bulk_urb(entry, priv->udev, | |
303 | usb_rcvbulkpipe(priv->udev, 1), | |
304 | skb_tail_pointer(skb), | |
305 | RTL8187_MAX_RX, rtl8187_rx_cb, skb); | |
306 | info = (struct rtl8187_rx_info *)skb->cb; | |
307 | info->urb = entry; | |
308 | info->dev = dev; | |
309 | skb_queue_tail(&priv->rx_queue, skb); | |
310 | usb_submit_urb(entry, GFP_KERNEL); | |
311 | } | |
312 | ||
313 | return 0; | |
314 | } | |
315 | ||
316 | static int rtl8187_init_hw(struct ieee80211_hw *dev) | |
317 | { | |
318 | struct rtl8187_priv *priv = dev->priv; | |
319 | u8 reg; | |
320 | int i; | |
321 | ||
322 | /* reset */ | |
323 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); | |
324 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); | |
325 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE); | |
326 | rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON); | |
327 | rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON); | |
328 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); | |
329 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); | |
330 | ||
331 | rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); | |
332 | ||
333 | msleep(200); | |
334 | rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10); | |
335 | rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11); | |
336 | rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00); | |
337 | msleep(200); | |
338 | ||
339 | reg = rtl818x_ioread8(priv, &priv->map->CMD); | |
340 | reg &= (1 << 1); | |
341 | reg |= RTL818X_CMD_RESET; | |
342 | rtl818x_iowrite8(priv, &priv->map->CMD, reg); | |
343 | ||
344 | i = 10; | |
345 | do { | |
346 | msleep(2); | |
347 | if (!(rtl818x_ioread8(priv, &priv->map->CMD) & | |
348 | RTL818X_CMD_RESET)) | |
349 | break; | |
350 | } while (--i); | |
351 | ||
352 | if (!i) { | |
353 | printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy)); | |
354 | return -ETIMEDOUT; | |
355 | } | |
356 | ||
357 | /* reload registers from eeprom */ | |
358 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD); | |
359 | ||
360 | i = 10; | |
361 | do { | |
362 | msleep(4); | |
363 | if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) & | |
364 | RTL818X_EEPROM_CMD_CONFIG)) | |
365 | break; | |
366 | } while (--i); | |
367 | ||
368 | if (!i) { | |
369 | printk(KERN_ERR "%s: eeprom reset timeout!\n", | |
370 | wiphy_name(dev->wiphy)); | |
371 | return -ETIMEDOUT; | |
372 | } | |
373 | ||
374 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); | |
375 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); | |
376 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE); | |
377 | rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON); | |
378 | rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON); | |
379 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); | |
380 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); | |
381 | ||
382 | /* setup card */ | |
383 | rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0); | |
384 | rtl818x_iowrite8(priv, &priv->map->GPIO, 0); | |
385 | ||
386 | rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8)); | |
387 | rtl818x_iowrite8(priv, &priv->map->GPIO, 1); | |
388 | rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); | |
389 | ||
390 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); | |
605bebe2 MW |
391 | |
392 | rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF); | |
393 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG1); | |
394 | reg &= 0x3F; | |
395 | reg |= 0x80; | |
396 | rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg); | |
397 | ||
398 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); | |
399 | ||
400 | rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); | |
401 | rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); | |
402 | rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81); | |
403 | ||
404 | // TODO: set RESP_RATE and BRSR properly | |
405 | rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0); | |
406 | rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); | |
407 | ||
408 | /* host_usb_init */ | |
409 | rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0); | |
410 | rtl818x_iowrite8(priv, &priv->map->GPIO, 0); | |
411 | reg = rtl818x_ioread8(priv, (u8 *)0xFE53); | |
412 | rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7)); | |
413 | rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8)); | |
414 | rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20); | |
415 | rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); | |
416 | rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80); | |
417 | rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80); | |
418 | rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80); | |
419 | msleep(100); | |
420 | ||
421 | rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008); | |
422 | rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF); | |
423 | rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044); | |
424 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); | |
425 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44); | |
426 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); | |
427 | rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7); | |
428 | msleep(100); | |
429 | ||
f6532111 | 430 | priv->rf->init(dev); |
605bebe2 MW |
431 | |
432 | rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); | |
f6532111 MW |
433 | reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1; |
434 | rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1); | |
605bebe2 MW |
435 | rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10); |
436 | rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80); | |
437 | rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60); | |
f6532111 | 438 | rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); |
605bebe2 MW |
439 | |
440 | return 0; | |
441 | } | |
442 | ||
4150c572 | 443 | static int rtl8187_start(struct ieee80211_hw *dev) |
605bebe2 MW |
444 | { |
445 | struct rtl8187_priv *priv = dev->priv; | |
446 | u32 reg; | |
447 | int ret; | |
448 | ||
449 | ret = rtl8187_init_hw(dev); | |
450 | if (ret) | |
451 | return ret; | |
452 | ||
453 | rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); | |
454 | ||
2fe14263 MW |
455 | rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0); |
456 | rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0); | |
457 | ||
605bebe2 MW |
458 | rtl8187_init_urbs(dev); |
459 | ||
460 | reg = RTL818X_RX_CONF_ONLYERLPKT | | |
461 | RTL818X_RX_CONF_RX_AUTORESETPHY | | |
462 | RTL818X_RX_CONF_BSSID | | |
463 | RTL818X_RX_CONF_MGMT | | |
605bebe2 MW |
464 | RTL818X_RX_CONF_DATA | |
465 | (7 << 13 /* RX FIFO threshold NONE */) | | |
466 | (7 << 10 /* MAX RX DMA */) | | |
467 | RTL818X_RX_CONF_BROADCAST | | |
605bebe2 | 468 | RTL818X_RX_CONF_NICMAC; |
605bebe2 | 469 | |
4150c572 | 470 | priv->rx_conf = reg; |
605bebe2 MW |
471 | rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); |
472 | ||
473 | reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); | |
474 | reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT; | |
475 | reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT; | |
476 | rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); | |
477 | ||
478 | reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); | |
479 | reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT; | |
480 | reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT; | |
481 | reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT; | |
482 | rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); | |
483 | ||
484 | reg = RTL818X_TX_CONF_CW_MIN | | |
485 | (7 << 21 /* MAX TX DMA */) | | |
486 | RTL818X_TX_CONF_NO_ICV; | |
487 | rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg); | |
488 | ||
489 | reg = rtl818x_ioread8(priv, &priv->map->CMD); | |
490 | reg |= RTL818X_CMD_TX_ENABLE; | |
491 | reg |= RTL818X_CMD_RX_ENABLE; | |
492 | rtl818x_iowrite8(priv, &priv->map->CMD, reg); | |
493 | ||
494 | return 0; | |
495 | } | |
496 | ||
4150c572 | 497 | static void rtl8187_stop(struct ieee80211_hw *dev) |
605bebe2 MW |
498 | { |
499 | struct rtl8187_priv *priv = dev->priv; | |
500 | struct rtl8187_rx_info *info; | |
501 | struct sk_buff *skb; | |
502 | u32 reg; | |
503 | ||
504 | rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); | |
505 | ||
506 | reg = rtl818x_ioread8(priv, &priv->map->CMD); | |
507 | reg &= ~RTL818X_CMD_TX_ENABLE; | |
508 | reg &= ~RTL818X_CMD_RX_ENABLE; | |
509 | rtl818x_iowrite8(priv, &priv->map->CMD, reg); | |
510 | ||
f6532111 | 511 | priv->rf->stop(dev); |
605bebe2 MW |
512 | |
513 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); | |
514 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG4); | |
515 | rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF); | |
516 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); | |
517 | ||
518 | while ((skb = skb_dequeue(&priv->rx_queue))) { | |
519 | info = (struct rtl8187_rx_info *)skb->cb; | |
520 | usb_kill_urb(info->urb); | |
521 | kfree_skb(skb); | |
522 | } | |
4150c572 | 523 | return; |
605bebe2 MW |
524 | } |
525 | ||
526 | static int rtl8187_add_interface(struct ieee80211_hw *dev, | |
527 | struct ieee80211_if_init_conf *conf) | |
528 | { | |
529 | struct rtl8187_priv *priv = dev->priv; | |
4150c572 | 530 | int i; |
605bebe2 | 531 | |
4150c572 JB |
532 | if (priv->mode != IEEE80211_IF_TYPE_MNTR) |
533 | return -EOPNOTSUPP; | |
605bebe2 MW |
534 | |
535 | switch (conf->type) { | |
536 | case IEEE80211_IF_TYPE_STA: | |
605bebe2 MW |
537 | priv->mode = conf->type; |
538 | break; | |
539 | default: | |
540 | return -EOPNOTSUPP; | |
541 | } | |
542 | ||
4150c572 JB |
543 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); |
544 | for (i = 0; i < ETH_ALEN; i++) | |
545 | rtl818x_iowrite8(priv, &priv->map->MAC[i], | |
546 | ((u8 *)conf->mac_addr)[i]); | |
547 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); | |
605bebe2 MW |
548 | |
549 | return 0; | |
550 | } | |
551 | ||
552 | static void rtl8187_remove_interface(struct ieee80211_hw *dev, | |
553 | struct ieee80211_if_init_conf *conf) | |
554 | { | |
555 | struct rtl8187_priv *priv = dev->priv; | |
4150c572 | 556 | priv->mode = IEEE80211_IF_TYPE_MNTR; |
605bebe2 MW |
557 | } |
558 | ||
559 | static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) | |
560 | { | |
561 | struct rtl8187_priv *priv = dev->priv; | |
f6532111 MW |
562 | u32 reg; |
563 | ||
564 | reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); | |
565 | /* Enable TX loopback on MAC level to avoid TX during channel | |
566 | * changes, as this has be seen to causes problems and the | |
567 | * card will stop work until next reset | |
568 | */ | |
569 | rtl818x_iowrite32(priv, &priv->map->TX_CONF, | |
570 | reg | RTL818X_TX_CONF_LOOPBACK_MAC); | |
571 | msleep(10); | |
572 | priv->rf->set_chan(dev, conf); | |
573 | msleep(10); | |
574 | rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg); | |
605bebe2 MW |
575 | |
576 | rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22); | |
577 | ||
578 | if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) { | |
579 | rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9); | |
580 | rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14); | |
581 | rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14); | |
582 | rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73); | |
583 | } else { | |
584 | rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14); | |
585 | rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24); | |
586 | rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24); | |
587 | rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5); | |
588 | } | |
589 | ||
590 | rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2); | |
591 | rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100); | |
592 | rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100); | |
593 | rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100); | |
594 | return 0; | |
595 | } | |
596 | ||
32bfd35d JB |
597 | static int rtl8187_config_interface(struct ieee80211_hw *dev, |
598 | struct ieee80211_vif *vif, | |
605bebe2 MW |
599 | struct ieee80211_if_conf *conf) |
600 | { | |
601 | struct rtl8187_priv *priv = dev->priv; | |
602 | int i; | |
603 | ||
604 | for (i = 0; i < ETH_ALEN; i++) | |
605 | rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]); | |
606 | ||
607 | if (is_valid_ether_addr(conf->bssid)) | |
608 | rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA); | |
609 | else | |
610 | rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK); | |
611 | ||
612 | return 0; | |
613 | } | |
614 | ||
4150c572 JB |
615 | static void rtl8187_configure_filter(struct ieee80211_hw *dev, |
616 | unsigned int changed_flags, | |
617 | unsigned int *total_flags, | |
2fe14263 | 618 | int mc_count, struct dev_addr_list *mclist) |
4150c572 JB |
619 | { |
620 | struct rtl8187_priv *priv = dev->priv; | |
621 | ||
4150c572 JB |
622 | if (changed_flags & FIF_FCSFAIL) |
623 | priv->rx_conf ^= RTL818X_RX_CONF_FCS; | |
624 | if (changed_flags & FIF_CONTROL) | |
625 | priv->rx_conf ^= RTL818X_RX_CONF_CTRL; | |
626 | if (changed_flags & FIF_OTHER_BSS) | |
627 | priv->rx_conf ^= RTL818X_RX_CONF_MONITOR; | |
2fe14263 | 628 | if (*total_flags & FIF_ALLMULTI || mc_count > 0) |
4150c572 | 629 | priv->rx_conf |= RTL818X_RX_CONF_MULTICAST; |
2fe14263 MW |
630 | else |
631 | priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST; | |
632 | ||
633 | *total_flags = 0; | |
4150c572 | 634 | |
4150c572 JB |
635 | if (priv->rx_conf & RTL818X_RX_CONF_FCS) |
636 | *total_flags |= FIF_FCSFAIL; | |
637 | if (priv->rx_conf & RTL818X_RX_CONF_CTRL) | |
638 | *total_flags |= FIF_CONTROL; | |
639 | if (priv->rx_conf & RTL818X_RX_CONF_MONITOR) | |
640 | *total_flags |= FIF_OTHER_BSS; | |
2fe14263 MW |
641 | if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST) |
642 | *total_flags |= FIF_ALLMULTI; | |
4150c572 JB |
643 | |
644 | rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf); | |
645 | } | |
646 | ||
605bebe2 MW |
647 | static const struct ieee80211_ops rtl8187_ops = { |
648 | .tx = rtl8187_tx, | |
4150c572 | 649 | .start = rtl8187_start, |
605bebe2 MW |
650 | .stop = rtl8187_stop, |
651 | .add_interface = rtl8187_add_interface, | |
652 | .remove_interface = rtl8187_remove_interface, | |
653 | .config = rtl8187_config, | |
654 | .config_interface = rtl8187_config_interface, | |
4150c572 | 655 | .configure_filter = rtl8187_configure_filter, |
605bebe2 MW |
656 | }; |
657 | ||
658 | static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom) | |
659 | { | |
660 | struct ieee80211_hw *dev = eeprom->data; | |
661 | struct rtl8187_priv *priv = dev->priv; | |
662 | u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); | |
663 | ||
664 | eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE; | |
665 | eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ; | |
666 | eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK; | |
667 | eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS; | |
668 | } | |
669 | ||
670 | static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom) | |
671 | { | |
672 | struct ieee80211_hw *dev = eeprom->data; | |
673 | struct rtl8187_priv *priv = dev->priv; | |
674 | u8 reg = RTL818X_EEPROM_CMD_PROGRAM; | |
675 | ||
676 | if (eeprom->reg_data_in) | |
677 | reg |= RTL818X_EEPROM_CMD_WRITE; | |
678 | if (eeprom->reg_data_out) | |
679 | reg |= RTL818X_EEPROM_CMD_READ; | |
680 | if (eeprom->reg_data_clock) | |
681 | reg |= RTL818X_EEPROM_CMD_CK; | |
682 | if (eeprom->reg_chip_select) | |
683 | reg |= RTL818X_EEPROM_CMD_CS; | |
684 | ||
685 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg); | |
686 | udelay(10); | |
687 | } | |
688 | ||
689 | static int __devinit rtl8187_probe(struct usb_interface *intf, | |
690 | const struct usb_device_id *id) | |
691 | { | |
692 | struct usb_device *udev = interface_to_usbdev(intf); | |
693 | struct ieee80211_hw *dev; | |
694 | struct rtl8187_priv *priv; | |
695 | struct eeprom_93cx6 eeprom; | |
696 | struct ieee80211_channel *channel; | |
697 | u16 txpwr, reg; | |
698 | int err, i; | |
0795af57 | 699 | DECLARE_MAC_BUF(mac); |
605bebe2 MW |
700 | |
701 | dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops); | |
702 | if (!dev) { | |
703 | printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n"); | |
704 | return -ENOMEM; | |
705 | } | |
706 | ||
707 | priv = dev->priv; | |
708 | ||
709 | SET_IEEE80211_DEV(dev, &intf->dev); | |
710 | usb_set_intfdata(intf, dev); | |
711 | priv->udev = udev; | |
712 | ||
713 | usb_get_dev(udev); | |
714 | ||
715 | skb_queue_head_init(&priv->rx_queue); | |
8318d78a JB |
716 | |
717 | BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels)); | |
718 | BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates)); | |
719 | ||
605bebe2 MW |
720 | memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels)); |
721 | memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates)); | |
722 | priv->map = (struct rtl818x_csr *)0xFF00; | |
8318d78a JB |
723 | |
724 | priv->band.band = IEEE80211_BAND_2GHZ; | |
725 | priv->band.channels = priv->channels; | |
726 | priv->band.n_channels = ARRAY_SIZE(rtl818x_channels); | |
727 | priv->band.bitrates = priv->rates; | |
728 | priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates); | |
729 | dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; | |
730 | ||
731 | ||
4150c572 | 732 | priv->mode = IEEE80211_IF_TYPE_MNTR; |
605bebe2 | 733 | dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | |
7848ba7d | 734 | IEEE80211_HW_RX_INCLUDES_FCS; |
605bebe2 MW |
735 | dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr); |
736 | dev->queues = 1; | |
737 | dev->max_rssi = 65; | |
738 | dev->max_signal = 64; | |
739 | ||
605bebe2 MW |
740 | eeprom.data = dev; |
741 | eeprom.register_read = rtl8187_eeprom_register_read; | |
742 | eeprom.register_write = rtl8187_eeprom_register_write; | |
743 | if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6)) | |
744 | eeprom.width = PCI_EEPROM_WIDTH_93C66; | |
745 | else | |
746 | eeprom.width = PCI_EEPROM_WIDTH_93C46; | |
747 | ||
748 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); | |
749 | udelay(10); | |
750 | ||
751 | eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR, | |
752 | (__le16 __force *)dev->wiphy->perm_addr, 3); | |
753 | if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { | |
754 | printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly " | |
755 | "generated MAC address\n"); | |
756 | random_ether_addr(dev->wiphy->perm_addr); | |
757 | } | |
758 | ||
759 | channel = priv->channels; | |
760 | for (i = 0; i < 3; i++) { | |
761 | eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i, | |
762 | &txpwr); | |
8318d78a JB |
763 | (*channel++).hw_value = txpwr & 0xFF; |
764 | (*channel++).hw_value = txpwr >> 8; | |
605bebe2 MW |
765 | } |
766 | for (i = 0; i < 2; i++) { | |
767 | eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i, | |
768 | &txpwr); | |
8318d78a JB |
769 | (*channel++).hw_value = txpwr & 0xFF; |
770 | (*channel++).hw_value = txpwr >> 8; | |
605bebe2 MW |
771 | } |
772 | for (i = 0; i < 2; i++) { | |
773 | eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6 + i, | |
774 | &txpwr); | |
8318d78a JB |
775 | (*channel++).hw_value = txpwr & 0xFF; |
776 | (*channel++).hw_value = txpwr >> 8; | |
605bebe2 MW |
777 | } |
778 | ||
779 | eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE, | |
780 | &priv->txpwr_base); | |
781 | ||
f6532111 MW |
782 | reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1; |
783 | rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1); | |
605bebe2 MW |
784 | /* 0 means asic B-cut, we should use SW 3 wire |
785 | * bit-by-bit banging for radio. 1 means we can use | |
786 | * USB specific request to write radio registers */ | |
787 | priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3; | |
f6532111 | 788 | rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); |
605bebe2 MW |
789 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); |
790 | ||
f6532111 | 791 | priv->rf = rtl8187_detect_rf(dev); |
605bebe2 MW |
792 | |
793 | err = ieee80211_register_hw(dev); | |
794 | if (err) { | |
795 | printk(KERN_ERR "rtl8187: Cannot register device\n"); | |
796 | goto err_free_dev; | |
797 | } | |
798 | ||
0795af57 JP |
799 | printk(KERN_INFO "%s: hwaddr %s, rtl8187 V%d + %s\n", |
800 | wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr), | |
f6532111 | 801 | priv->asic_rev, priv->rf->name); |
605bebe2 MW |
802 | |
803 | return 0; | |
804 | ||
805 | err_free_dev: | |
806 | ieee80211_free_hw(dev); | |
807 | usb_set_intfdata(intf, NULL); | |
808 | usb_put_dev(udev); | |
809 | return err; | |
810 | } | |
811 | ||
812 | static void __devexit rtl8187_disconnect(struct usb_interface *intf) | |
813 | { | |
814 | struct ieee80211_hw *dev = usb_get_intfdata(intf); | |
815 | struct rtl8187_priv *priv; | |
816 | ||
817 | if (!dev) | |
818 | return; | |
819 | ||
820 | ieee80211_unregister_hw(dev); | |
821 | ||
822 | priv = dev->priv; | |
823 | usb_put_dev(interface_to_usbdev(intf)); | |
824 | ieee80211_free_hw(dev); | |
825 | } | |
826 | ||
827 | static struct usb_driver rtl8187_driver = { | |
828 | .name = KBUILD_MODNAME, | |
829 | .id_table = rtl8187_table, | |
830 | .probe = rtl8187_probe, | |
831 | .disconnect = rtl8187_disconnect, | |
832 | }; | |
833 | ||
834 | static int __init rtl8187_init(void) | |
835 | { | |
836 | return usb_register(&rtl8187_driver); | |
837 | } | |
838 | ||
839 | static void __exit rtl8187_exit(void) | |
840 | { | |
841 | usb_deregister(&rtl8187_driver); | |
842 | } | |
843 | ||
844 | module_init(rtl8187_init); | |
845 | module_exit(rtl8187_exit); |