]>
Commit | Line | Data |
---|---|---|
605bebe2 MW |
1 | /* |
2 | * Linux device driver for RTL8187 | |
3 | * | |
4 | * Copyright 2007 Michael Wu <flamingice@sourmilk.net> | |
5 | * Copyright 2007 Andrea Merello <andreamrl@tiscali.it> | |
6 | * | |
7 | * Based on the r8187 driver, which is: | |
8 | * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al. | |
9 | * | |
3461fc12 LF |
10 | * The driver was extended to the RTL8187B in 2008 by: |
11 | * Herton Ronaldo Krzesinski <herton@mandriva.com.br> | |
12 | * Hin-Tak Leung <htl10@users.sourceforge.net> | |
13 | * Larry Finger <Larry.Finger@lwfinger.net> | |
14 | * | |
0aec00ae JL |
15 | * Magic delays and register offsets below are taken from the original |
16 | * r8187 driver sources. Thanks to Realtek for their support! | |
605bebe2 MW |
17 | * |
18 | * This program is free software; you can redistribute it and/or modify | |
19 | * it under the terms of the GNU General Public License version 2 as | |
20 | * published by the Free Software Foundation. | |
21 | */ | |
22 | ||
23 | #include <linux/init.h> | |
24 | #include <linux/usb.h> | |
25 | #include <linux/delay.h> | |
26 | #include <linux/etherdevice.h> | |
27 | #include <linux/eeprom_93cx6.h> | |
28 | #include <net/mac80211.h> | |
29 | ||
30 | #include "rtl8187.h" | |
31 | #include "rtl8187_rtl8225.h" | |
a027087a LF |
32 | #ifdef CONFIG_RTL8187_LEDS |
33 | #include "rtl8187_leds.h" | |
34 | #endif | |
ca9152e3 | 35 | #include "rtl8187_rfkill.h" |
605bebe2 MW |
36 | |
37 | MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); | |
38 | MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>"); | |
3461fc12 LF |
39 | MODULE_AUTHOR("Herton Ronaldo Krzesinski <herton@mandriva.com.br>"); |
40 | MODULE_AUTHOR("Hin-Tak Leung <htl10@users.sourceforge.net>"); | |
41 | MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>"); | |
f8a08c34 | 42 | MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver"); |
605bebe2 MW |
43 | MODULE_LICENSE("GPL"); |
44 | ||
45 | static struct usb_device_id rtl8187_table[] __devinitdata = { | |
7c7e6af3 AM |
46 | /* Asus */ |
47 | {USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187}, | |
eaca90da FF |
48 | /* Belkin */ |
49 | {USB_DEVICE(0x050d, 0x705e), .driver_info = DEVICE_RTL8187B}, | |
605bebe2 | 50 | /* Realtek */ |
f8a08c34 HTL |
51 | {USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187}, |
52 | {USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B}, | |
53 | {USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B}, | |
746db510 | 54 | {USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B}, |
046ee5d2 LF |
55 | /* Surecom */ |
56 | {USB_DEVICE(0x0769, 0x11F2), .driver_info = DEVICE_RTL8187}, | |
57 | /* Logitech */ | |
58 | {USB_DEVICE(0x0789, 0x010C), .driver_info = DEVICE_RTL8187}, | |
605bebe2 | 59 | /* Netgear */ |
f8a08c34 HTL |
60 | {USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187}, |
61 | {USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187}, | |
fcd7cc14 | 62 | {USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B}, |
c3cf60a9 | 63 | /* HP */ |
f8a08c34 | 64 | {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, |
9934550d | 65 | /* Sitecom */ |
f8a08c34 | 66 | {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, |
f3c76918 | 67 | {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B}, |
046ee5d2 LF |
68 | /* Sphairon Access Systems GmbH */ |
69 | {USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187}, | |
70 | /* Dick Smith Electronics */ | |
71 | {USB_DEVICE(0x1371, 0x9401), .driver_info = DEVICE_RTL8187}, | |
8f7c41d4 IK |
72 | /* Abocom */ |
73 | {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, | |
046ee5d2 LF |
74 | /* Qcom */ |
75 | {USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187}, | |
76 | /* AirLive */ | |
77 | {USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187}, | |
aeeab4ff JL |
78 | /* Linksys */ |
79 | {USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B}, | |
605bebe2 MW |
80 | {} |
81 | }; | |
82 | ||
83 | MODULE_DEVICE_TABLE(usb, rtl8187_table); | |
84 | ||
8318d78a JB |
85 | static const struct ieee80211_rate rtl818x_rates[] = { |
86 | { .bitrate = 10, .hw_value = 0, }, | |
87 | { .bitrate = 20, .hw_value = 1, }, | |
88 | { .bitrate = 55, .hw_value = 2, }, | |
89 | { .bitrate = 110, .hw_value = 3, }, | |
90 | { .bitrate = 60, .hw_value = 4, }, | |
91 | { .bitrate = 90, .hw_value = 5, }, | |
92 | { .bitrate = 120, .hw_value = 6, }, | |
93 | { .bitrate = 180, .hw_value = 7, }, | |
94 | { .bitrate = 240, .hw_value = 8, }, | |
95 | { .bitrate = 360, .hw_value = 9, }, | |
96 | { .bitrate = 480, .hw_value = 10, }, | |
97 | { .bitrate = 540, .hw_value = 11, }, | |
98 | }; | |
99 | ||
100 | static const struct ieee80211_channel rtl818x_channels[] = { | |
101 | { .center_freq = 2412 }, | |
102 | { .center_freq = 2417 }, | |
103 | { .center_freq = 2422 }, | |
104 | { .center_freq = 2427 }, | |
105 | { .center_freq = 2432 }, | |
106 | { .center_freq = 2437 }, | |
107 | { .center_freq = 2442 }, | |
108 | { .center_freq = 2447 }, | |
109 | { .center_freq = 2452 }, | |
110 | { .center_freq = 2457 }, | |
111 | { .center_freq = 2462 }, | |
112 | { .center_freq = 2467 }, | |
113 | { .center_freq = 2472 }, | |
114 | { .center_freq = 2484 }, | |
115 | }; | |
116 | ||
4150c572 JB |
117 | static void rtl8187_iowrite_async_cb(struct urb *urb) |
118 | { | |
119 | kfree(urb->context); | |
4150c572 JB |
120 | } |
121 | ||
122 | static void rtl8187_iowrite_async(struct rtl8187_priv *priv, __le16 addr, | |
123 | void *data, u16 len) | |
124 | { | |
125 | struct usb_ctrlrequest *dr; | |
126 | struct urb *urb; | |
127 | struct rtl8187_async_write_data { | |
128 | u8 data[4]; | |
129 | struct usb_ctrlrequest dr; | |
130 | } *buf; | |
ea8ee240 | 131 | int rc; |
4150c572 JB |
132 | |
133 | buf = kmalloc(sizeof(*buf), GFP_ATOMIC); | |
134 | if (!buf) | |
135 | return; | |
136 | ||
137 | urb = usb_alloc_urb(0, GFP_ATOMIC); | |
138 | if (!urb) { | |
139 | kfree(buf); | |
140 | return; | |
141 | } | |
142 | ||
143 | dr = &buf->dr; | |
144 | ||
145 | dr->bRequestType = RTL8187_REQT_WRITE; | |
146 | dr->bRequest = RTL8187_REQ_SET_REG; | |
147 | dr->wValue = addr; | |
148 | dr->wIndex = 0; | |
149 | dr->wLength = cpu_to_le16(len); | |
150 | ||
151 | memcpy(buf, data, len); | |
152 | ||
153 | usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0), | |
154 | (unsigned char *)dr, buf, len, | |
155 | rtl8187_iowrite_async_cb, buf); | |
c1db52b9 | 156 | usb_anchor_urb(urb, &priv->anchored); |
ea8ee240 ON |
157 | rc = usb_submit_urb(urb, GFP_ATOMIC); |
158 | if (rc < 0) { | |
159 | kfree(buf); | |
c1db52b9 | 160 | usb_unanchor_urb(urb); |
ea8ee240 | 161 | } |
c1db52b9 | 162 | usb_free_urb(urb); |
4150c572 JB |
163 | } |
164 | ||
165 | static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv, | |
166 | __le32 *addr, u32 val) | |
167 | { | |
168 | __le32 buf = cpu_to_le32(val); | |
169 | ||
170 | rtl8187_iowrite_async(priv, cpu_to_le16((unsigned long)addr), | |
171 | &buf, sizeof(buf)); | |
172 | } | |
173 | ||
605bebe2 MW |
174 | void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data) |
175 | { | |
176 | struct rtl8187_priv *priv = dev->priv; | |
177 | ||
178 | data <<= 8; | |
179 | data |= addr | 0x80; | |
180 | ||
181 | rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF); | |
182 | rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF); | |
183 | rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF); | |
184 | rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF); | |
605bebe2 MW |
185 | } |
186 | ||
187 | static void rtl8187_tx_cb(struct urb *urb) | |
188 | { | |
605bebe2 | 189 | struct sk_buff *skb = (struct sk_buff *)urb->context; |
e039fa4a | 190 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
e6a9854b | 191 | struct ieee80211_hw *hw = info->rate_driver_data[0]; |
6f7853f3 | 192 | struct rtl8187_priv *priv = hw->priv; |
605bebe2 | 193 | |
6f7853f3 HTL |
194 | skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) : |
195 | sizeof(struct rtl8187_tx_hdr)); | |
e6a9854b | 196 | ieee80211_tx_info_clear_status(info); |
3517afde | 197 | |
2f47690e LF |
198 | if (!(urb->status) && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) { |
199 | if (priv->is_rtl8187b) { | |
200 | skb_queue_tail(&priv->b_tx_status.queue, skb); | |
201 | ||
202 | /* queue is "full", discard last items */ | |
203 | while (skb_queue_len(&priv->b_tx_status.queue) > 5) { | |
204 | struct sk_buff *old_skb; | |
205 | ||
206 | dev_dbg(&priv->udev->dev, | |
207 | "transmit status queue full\n"); | |
208 | ||
209 | old_skb = skb_dequeue(&priv->b_tx_status.queue); | |
210 | ieee80211_tx_status_irqsafe(hw, old_skb); | |
211 | } | |
212 | return; | |
213 | } else { | |
3517afde | 214 | info->flags |= IEEE80211_TX_STAT_ACK; |
2f47690e LF |
215 | } |
216 | } | |
217 | if (priv->is_rtl8187b) | |
3517afde | 218 | ieee80211_tx_status_irqsafe(hw, skb); |
2f47690e LF |
219 | else { |
220 | /* Retry information for the RTI8187 is only available by | |
221 | * reading a register in the device. We are in interrupt mode | |
222 | * here, thus queue the skb and finish on a work queue. */ | |
223 | skb_queue_tail(&priv->b_tx_status.queue, skb); | |
42935eca | 224 | ieee80211_queue_delayed_work(hw, &priv->work, 0); |
3517afde | 225 | } |
605bebe2 MW |
226 | } |
227 | ||
e039fa4a | 228 | static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) |
605bebe2 MW |
229 | { |
230 | struct rtl8187_priv *priv = dev->priv; | |
e039fa4a | 231 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
6f7853f3 HTL |
232 | unsigned int ep; |
233 | void *buf; | |
605bebe2 | 234 | struct urb *urb; |
98798f48 MW |
235 | __le16 rts_dur = 0; |
236 | u32 flags; | |
ea8ee240 | 237 | int rc; |
605bebe2 MW |
238 | |
239 | urb = usb_alloc_urb(0, GFP_ATOMIC); | |
240 | if (!urb) { | |
241 | kfree_skb(skb); | |
d6e2be98 | 242 | return NETDEV_TX_OK; |
605bebe2 MW |
243 | } |
244 | ||
98798f48 | 245 | flags = skb->len; |
38e3b0d8 | 246 | flags |= RTL818X_TX_DESC_FLAG_NO_ENC; |
aa68cbfb | 247 | |
e039fa4a | 248 | flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24; |
8b7b1e05 | 249 | if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control)) |
38e3b0d8 | 250 | flags |= RTL818X_TX_DESC_FLAG_MOREFRAG; |
e6a9854b | 251 | if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { |
38e3b0d8 | 252 | flags |= RTL818X_TX_DESC_FLAG_RTS; |
e039fa4a | 253 | flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; |
32bfd35d | 254 | rts_dur = ieee80211_rts_duration(dev, priv->vif, |
e039fa4a | 255 | skb->len, info); |
e6a9854b | 256 | } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { |
38e3b0d8 | 257 | flags |= RTL818X_TX_DESC_FLAG_CTS; |
e039fa4a | 258 | flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; |
aa68cbfb | 259 | } |
98798f48 | 260 | |
6f7853f3 HTL |
261 | if (!priv->is_rtl8187b) { |
262 | struct rtl8187_tx_hdr *hdr = | |
263 | (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr)); | |
264 | hdr->flags = cpu_to_le32(flags); | |
265 | hdr->len = 0; | |
266 | hdr->rts_duration = rts_dur; | |
d9a1f486 | 267 | hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); |
6f7853f3 HTL |
268 | buf = hdr; |
269 | ||
270 | ep = 2; | |
271 | } else { | |
272 | /* fc needs to be calculated before skb_push() */ | |
273 | unsigned int epmap[4] = { 6, 7, 5, 4 }; | |
274 | struct ieee80211_hdr *tx_hdr = | |
275 | (struct ieee80211_hdr *)(skb->data); | |
276 | u16 fc = le16_to_cpu(tx_hdr->frame_control); | |
277 | ||
278 | struct rtl8187b_tx_hdr *hdr = | |
279 | (struct rtl8187b_tx_hdr *)skb_push(skb, sizeof(*hdr)); | |
280 | struct ieee80211_rate *txrate = | |
281 | ieee80211_get_tx_rate(dev, info); | |
282 | memset(hdr, 0, sizeof(*hdr)); | |
283 | hdr->flags = cpu_to_le32(flags); | |
284 | hdr->rts_duration = rts_dur; | |
d9a1f486 | 285 | hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); |
6f7853f3 HTL |
286 | hdr->tx_duration = |
287 | ieee80211_generic_frame_duration(dev, priv->vif, | |
288 | skb->len, txrate); | |
289 | buf = hdr; | |
290 | ||
291 | if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) | |
292 | ep = 12; | |
293 | else | |
294 | ep = epmap[skb_get_queue_mapping(skb)]; | |
295 | } | |
605bebe2 | 296 | |
e6a9854b JB |
297 | info->rate_driver_data[0] = dev; |
298 | info->rate_driver_data[1] = urb; | |
6f7853f3 HTL |
299 | |
300 | usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep), | |
301 | buf, skb->len, rtl8187_tx_cb, skb); | |
2fcbab04 | 302 | urb->transfer_flags |= URB_ZERO_PACKET; |
c1db52b9 | 303 | usb_anchor_urb(urb, &priv->anchored); |
ea8ee240 ON |
304 | rc = usb_submit_urb(urb, GFP_ATOMIC); |
305 | if (rc < 0) { | |
c1db52b9 | 306 | usb_unanchor_urb(urb); |
ea8ee240 ON |
307 | kfree_skb(skb); |
308 | } | |
c1db52b9 | 309 | usb_free_urb(urb); |
605bebe2 | 310 | |
d6e2be98 | 311 | return NETDEV_TX_OK; |
605bebe2 MW |
312 | } |
313 | ||
314 | static void rtl8187_rx_cb(struct urb *urb) | |
315 | { | |
316 | struct sk_buff *skb = (struct sk_buff *)urb->context; | |
317 | struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb; | |
318 | struct ieee80211_hw *dev = info->dev; | |
319 | struct rtl8187_priv *priv = dev->priv; | |
605bebe2 MW |
320 | struct ieee80211_rx_status rx_status = { 0 }; |
321 | int rate, signal; | |
4150c572 | 322 | u32 flags; |
d8588227 | 323 | unsigned long f; |
605bebe2 | 324 | |
d8588227 | 325 | spin_lock_irqsave(&priv->rx_queue.lock, f); |
46c37672 | 326 | __skb_unlink(skb, &priv->rx_queue); |
d8588227 | 327 | spin_unlock_irqrestore(&priv->rx_queue.lock, f); |
c1db52b9 | 328 | skb_put(skb, urb->actual_length); |
605bebe2 MW |
329 | |
330 | if (unlikely(urb->status)) { | |
605bebe2 MW |
331 | dev_kfree_skb_irq(skb); |
332 | return; | |
333 | } | |
334 | ||
6f7853f3 HTL |
335 | if (!priv->is_rtl8187b) { |
336 | struct rtl8187_rx_hdr *hdr = | |
337 | (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr)); | |
338 | flags = le32_to_cpu(hdr->flags); | |
a7db74f4 | 339 | /* As with the RTL8187B below, the AGC is used to calculate |
70d9f405 | 340 | * signal strength. In this case, the scaling |
a7db74f4 LF |
341 | * constants are derived from the output of p54usb. |
342 | */ | |
a7db74f4 | 343 | signal = -4 - ((27 * hdr->agc) >> 6); |
6f7853f3 | 344 | rx_status.antenna = (hdr->signal >> 7) & 1; |
6f7853f3 | 345 | rx_status.mactime = le64_to_cpu(hdr->mac_time); |
6f7853f3 HTL |
346 | } else { |
347 | struct rtl8187b_rx_hdr *hdr = | |
348 | (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr)); | |
0ccd58fc LF |
349 | /* The Realtek datasheet for the RTL8187B shows that the RX |
350 | * header contains the following quantities: signal quality, | |
351 | * RSSI, AGC, the received power in dB, and the measured SNR. | |
352 | * In testing, none of these quantities show qualitative | |
353 | * agreement with AP signal strength, except for the AGC, | |
354 | * which is inversely proportional to the strength of the | |
70d9f405 LF |
355 | * signal. In the following, the signal strength |
356 | * is derived from the AGC. The arbitrary scaling constants | |
0ccd58fc LF |
357 | * are chosen to make the results close to the values obtained |
358 | * for a BCM4312 using b43 as the driver. The noise is ignored | |
359 | * for now. | |
360 | */ | |
6f7853f3 | 361 | flags = le32_to_cpu(hdr->flags); |
0ccd58fc | 362 | signal = 14 - hdr->agc / 2; |
0ccd58fc | 363 | rx_status.antenna = (hdr->rssi >> 7) & 1; |
6f7853f3 | 364 | rx_status.mactime = le64_to_cpu(hdr->mac_time); |
6f7853f3 | 365 | } |
605bebe2 | 366 | |
a7db74f4 LF |
367 | rx_status.signal = signal; |
368 | priv->signal = signal; | |
369 | rate = (flags >> 20) & 0xF; | |
6f7853f3 | 370 | skb_trim(skb, flags & 0x0FFF); |
8318d78a JB |
371 | rx_status.rate_idx = rate; |
372 | rx_status.freq = dev->conf.channel->center_freq; | |
373 | rx_status.band = dev->conf.channel->band; | |
03bffc13 | 374 | rx_status.flag |= RX_FLAG_TSFT; |
38e3b0d8 | 375 | if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) |
4150c572 | 376 | rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; |
f1d58c25 JB |
377 | memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); |
378 | ieee80211_rx_irqsafe(dev, skb); | |
605bebe2 MW |
379 | |
380 | skb = dev_alloc_skb(RTL8187_MAX_RX); | |
381 | if (unlikely(!skb)) { | |
605bebe2 MW |
382 | /* TODO check rx queue length and refill *somewhere* */ |
383 | return; | |
384 | } | |
385 | ||
386 | info = (struct rtl8187_rx_info *)skb->cb; | |
387 | info->urb = urb; | |
388 | info->dev = dev; | |
389 | urb->transfer_buffer = skb_tail_pointer(skb); | |
390 | urb->context = skb; | |
391 | skb_queue_tail(&priv->rx_queue, skb); | |
392 | ||
c1db52b9 LF |
393 | usb_anchor_urb(urb, &priv->anchored); |
394 | if (usb_submit_urb(urb, GFP_ATOMIC)) { | |
395 | usb_unanchor_urb(urb); | |
396 | skb_unlink(skb, &priv->rx_queue); | |
397 | dev_kfree_skb_irq(skb); | |
398 | } | |
605bebe2 MW |
399 | } |
400 | ||
401 | static int rtl8187_init_urbs(struct ieee80211_hw *dev) | |
402 | { | |
403 | struct rtl8187_priv *priv = dev->priv; | |
c1db52b9 | 404 | struct urb *entry = NULL; |
605bebe2 MW |
405 | struct sk_buff *skb; |
406 | struct rtl8187_rx_info *info; | |
c1db52b9 | 407 | int ret = 0; |
605bebe2 | 408 | |
2a57cf3e | 409 | while (skb_queue_len(&priv->rx_queue) < 16) { |
605bebe2 | 410 | skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL); |
c1db52b9 LF |
411 | if (!skb) { |
412 | ret = -ENOMEM; | |
413 | goto err; | |
414 | } | |
605bebe2 MW |
415 | entry = usb_alloc_urb(0, GFP_KERNEL); |
416 | if (!entry) { | |
c1db52b9 LF |
417 | ret = -ENOMEM; |
418 | goto err; | |
605bebe2 MW |
419 | } |
420 | usb_fill_bulk_urb(entry, priv->udev, | |
6f7853f3 HTL |
421 | usb_rcvbulkpipe(priv->udev, |
422 | priv->is_rtl8187b ? 3 : 1), | |
605bebe2 MW |
423 | skb_tail_pointer(skb), |
424 | RTL8187_MAX_RX, rtl8187_rx_cb, skb); | |
425 | info = (struct rtl8187_rx_info *)skb->cb; | |
426 | info->urb = entry; | |
427 | info->dev = dev; | |
428 | skb_queue_tail(&priv->rx_queue, skb); | |
c1db52b9 LF |
429 | usb_anchor_urb(entry, &priv->anchored); |
430 | ret = usb_submit_urb(entry, GFP_KERNEL); | |
431 | if (ret) { | |
432 | skb_unlink(skb, &priv->rx_queue); | |
433 | usb_unanchor_urb(entry); | |
434 | goto err; | |
435 | } | |
436 | usb_free_urb(entry); | |
605bebe2 | 437 | } |
c1db52b9 | 438 | return ret; |
605bebe2 | 439 | |
c1db52b9 LF |
440 | err: |
441 | usb_free_urb(entry); | |
442 | kfree_skb(skb); | |
443 | usb_kill_anchored_urbs(&priv->anchored); | |
444 | return ret; | |
605bebe2 MW |
445 | } |
446 | ||
3517afde HRK |
447 | static void rtl8187b_status_cb(struct urb *urb) |
448 | { | |
449 | struct ieee80211_hw *hw = (struct ieee80211_hw *)urb->context; | |
450 | struct rtl8187_priv *priv = hw->priv; | |
451 | u64 val; | |
452 | unsigned int cmd_type; | |
453 | ||
c1db52b9 | 454 | if (unlikely(urb->status)) |
3517afde | 455 | return; |
3517afde HRK |
456 | |
457 | /* | |
458 | * Read from status buffer: | |
459 | * | |
460 | * bits [30:31] = cmd type: | |
461 | * - 0 indicates tx beacon interrupt | |
462 | * - 1 indicates tx close descriptor | |
463 | * | |
464 | * In the case of tx beacon interrupt: | |
465 | * [0:9] = Last Beacon CW | |
466 | * [10:29] = reserved | |
467 | * [30:31] = 00b | |
468 | * [32:63] = Last Beacon TSF | |
469 | * | |
470 | * If it's tx close descriptor: | |
471 | * [0:7] = Packet Retry Count | |
472 | * [8:14] = RTS Retry Count | |
473 | * [15] = TOK | |
474 | * [16:27] = Sequence No | |
475 | * [28] = LS | |
476 | * [29] = FS | |
477 | * [30:31] = 01b | |
478 | * [32:47] = unused (reserved?) | |
479 | * [48:63] = MAC Used Time | |
480 | */ | |
481 | val = le64_to_cpu(priv->b_tx_status.buf); | |
482 | ||
483 | cmd_type = (val >> 30) & 0x3; | |
484 | if (cmd_type == 1) { | |
485 | unsigned int pkt_rc, seq_no; | |
486 | bool tok; | |
487 | struct sk_buff *skb; | |
488 | struct ieee80211_hdr *ieee80211hdr; | |
489 | unsigned long flags; | |
490 | ||
491 | pkt_rc = val & 0xFF; | |
492 | tok = val & (1 << 15); | |
493 | seq_no = (val >> 16) & 0xFFF; | |
494 | ||
495 | spin_lock_irqsave(&priv->b_tx_status.queue.lock, flags); | |
496 | skb_queue_reverse_walk(&priv->b_tx_status.queue, skb) { | |
497 | ieee80211hdr = (struct ieee80211_hdr *)skb->data; | |
498 | ||
499 | /* | |
500 | * While testing, it was discovered that the seq_no | |
501 | * doesn't actually contains the sequence number. | |
502 | * Instead of returning just the 12 bits of sequence | |
503 | * number, hardware is returning entire sequence control | |
504 | * (fragment number plus sequence number) in a 12 bit | |
505 | * only field overflowing after some time. As a | |
506 | * workaround, just consider the lower bits, and expect | |
507 | * it's unlikely we wrongly ack some sent data | |
508 | */ | |
509 | if ((le16_to_cpu(ieee80211hdr->seq_ctrl) | |
510 | & 0xFFF) == seq_no) | |
511 | break; | |
512 | } | |
513 | if (skb != (struct sk_buff *) &priv->b_tx_status.queue) { | |
514 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
515 | ||
516 | __skb_unlink(skb, &priv->b_tx_status.queue); | |
517 | if (tok) | |
518 | info->flags |= IEEE80211_TX_STAT_ACK; | |
1548c86a | 519 | info->status.rates[0].count = pkt_rc + 1; |
3517afde HRK |
520 | |
521 | ieee80211_tx_status_irqsafe(hw, skb); | |
522 | } | |
523 | spin_unlock_irqrestore(&priv->b_tx_status.queue.lock, flags); | |
524 | } | |
525 | ||
c1db52b9 LF |
526 | usb_anchor_urb(urb, &priv->anchored); |
527 | if (usb_submit_urb(urb, GFP_ATOMIC)) | |
528 | usb_unanchor_urb(urb); | |
3517afde HRK |
529 | } |
530 | ||
531 | static int rtl8187b_init_status_urb(struct ieee80211_hw *dev) | |
532 | { | |
533 | struct rtl8187_priv *priv = dev->priv; | |
534 | struct urb *entry; | |
c1db52b9 | 535 | int ret = 0; |
3517afde HRK |
536 | |
537 | entry = usb_alloc_urb(0, GFP_KERNEL); | |
538 | if (!entry) | |
539 | return -ENOMEM; | |
3517afde HRK |
540 | |
541 | usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, 9), | |
542 | &priv->b_tx_status.buf, sizeof(priv->b_tx_status.buf), | |
543 | rtl8187b_status_cb, dev); | |
544 | ||
c1db52b9 LF |
545 | usb_anchor_urb(entry, &priv->anchored); |
546 | ret = usb_submit_urb(entry, GFP_KERNEL); | |
547 | if (ret) | |
548 | usb_unanchor_urb(entry); | |
549 | usb_free_urb(entry); | |
3517afde | 550 | |
c1db52b9 | 551 | return ret; |
3517afde HRK |
552 | } |
553 | ||
f8a08c34 | 554 | static int rtl8187_cmd_reset(struct ieee80211_hw *dev) |
605bebe2 MW |
555 | { |
556 | struct rtl8187_priv *priv = dev->priv; | |
557 | u8 reg; | |
558 | int i; | |
559 | ||
605bebe2 MW |
560 | reg = rtl818x_ioread8(priv, &priv->map->CMD); |
561 | reg &= (1 << 1); | |
562 | reg |= RTL818X_CMD_RESET; | |
563 | rtl818x_iowrite8(priv, &priv->map->CMD, reg); | |
564 | ||
565 | i = 10; | |
566 | do { | |
567 | msleep(2); | |
568 | if (!(rtl818x_ioread8(priv, &priv->map->CMD) & | |
569 | RTL818X_CMD_RESET)) | |
570 | break; | |
571 | } while (--i); | |
572 | ||
573 | if (!i) { | |
574 | printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy)); | |
575 | return -ETIMEDOUT; | |
576 | } | |
577 | ||
578 | /* reload registers from eeprom */ | |
579 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD); | |
580 | ||
581 | i = 10; | |
582 | do { | |
583 | msleep(4); | |
584 | if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) & | |
585 | RTL818X_EEPROM_CMD_CONFIG)) | |
586 | break; | |
587 | } while (--i); | |
588 | ||
589 | if (!i) { | |
590 | printk(KERN_ERR "%s: eeprom reset timeout!\n", | |
591 | wiphy_name(dev->wiphy)); | |
592 | return -ETIMEDOUT; | |
593 | } | |
594 | ||
f8a08c34 HTL |
595 | return 0; |
596 | } | |
597 | ||
598 | static int rtl8187_init_hw(struct ieee80211_hw *dev) | |
599 | { | |
600 | struct rtl8187_priv *priv = dev->priv; | |
601 | u8 reg; | |
602 | int res; | |
603 | ||
604 | /* reset */ | |
605 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, | |
606 | RTL818X_EEPROM_CMD_CONFIG); | |
607 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); | |
608 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | | |
609 | RTL818X_CONFIG3_ANAPARAM_WRITE); | |
4ece16a1 HRK |
610 | rtl818x_iowrite32(priv, &priv->map->ANAPARAM, |
611 | RTL8187_RTL8225_ANAPARAM_ON); | |
612 | rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, | |
613 | RTL8187_RTL8225_ANAPARAM2_ON); | |
f8a08c34 HTL |
614 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & |
615 | ~RTL818X_CONFIG3_ANAPARAM_WRITE); | |
616 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, | |
617 | RTL818X_EEPROM_CMD_NORMAL); | |
618 | ||
619 | rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); | |
620 | ||
621 | msleep(200); | |
622 | rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10); | |
623 | rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11); | |
624 | rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00); | |
625 | msleep(200); | |
626 | ||
627 | res = rtl8187_cmd_reset(dev); | |
628 | if (res) | |
629 | return res; | |
630 | ||
605bebe2 MW |
631 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); |
632 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); | |
f8a08c34 HTL |
633 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, |
634 | reg | RTL818X_CONFIG3_ANAPARAM_WRITE); | |
4ece16a1 HRK |
635 | rtl818x_iowrite32(priv, &priv->map->ANAPARAM, |
636 | RTL8187_RTL8225_ANAPARAM_ON); | |
637 | rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, | |
638 | RTL8187_RTL8225_ANAPARAM2_ON); | |
f8a08c34 HTL |
639 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, |
640 | reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); | |
605bebe2 MW |
641 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); |
642 | ||
643 | /* setup card */ | |
644 | rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0); | |
ca9152e3 | 645 | rtl818x_iowrite8(priv, &priv->map->GPIO0, 0); |
605bebe2 MW |
646 | |
647 | rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8)); | |
ca9152e3 | 648 | rtl818x_iowrite8(priv, &priv->map->GPIO0, 1); |
605bebe2 MW |
649 | rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); |
650 | ||
651 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); | |
605bebe2 MW |
652 | |
653 | rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF); | |
654 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG1); | |
655 | reg &= 0x3F; | |
656 | reg |= 0x80; | |
657 | rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg); | |
658 | ||
659 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); | |
660 | ||
661 | rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); | |
662 | rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); | |
2f47690e | 663 | rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0); |
605bebe2 MW |
664 | |
665 | // TODO: set RESP_RATE and BRSR properly | |
666 | rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0); | |
667 | rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); | |
668 | ||
669 | /* host_usb_init */ | |
670 | rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0); | |
ca9152e3 | 671 | rtl818x_iowrite8(priv, &priv->map->GPIO0, 0); |
605bebe2 MW |
672 | reg = rtl818x_ioread8(priv, (u8 *)0xFE53); |
673 | rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7)); | |
674 | rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8)); | |
ca9152e3 | 675 | rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x20); |
605bebe2 MW |
676 | rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); |
677 | rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80); | |
678 | rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80); | |
679 | rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80); | |
680 | msleep(100); | |
681 | ||
682 | rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008); | |
683 | rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF); | |
684 | rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044); | |
f8a08c34 HTL |
685 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, |
686 | RTL818X_EEPROM_CMD_CONFIG); | |
605bebe2 | 687 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44); |
f8a08c34 HTL |
688 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, |
689 | RTL818X_EEPROM_CMD_NORMAL); | |
605bebe2 MW |
690 | rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7); |
691 | msleep(100); | |
692 | ||
f6532111 | 693 | priv->rf->init(dev); |
605bebe2 MW |
694 | |
695 | rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); | |
f6532111 MW |
696 | reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1; |
697 | rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1); | |
605bebe2 MW |
698 | rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10); |
699 | rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80); | |
700 | rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60); | |
f6532111 | 701 | rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); |
605bebe2 MW |
702 | |
703 | return 0; | |
704 | } | |
705 | ||
f8a08c34 HTL |
706 | static const u8 rtl8187b_reg_table[][3] = { |
707 | {0xF0, 0x32, 0}, {0xF1, 0x32, 0}, {0xF2, 0x00, 0}, {0xF3, 0x00, 0}, | |
708 | {0xF4, 0x32, 0}, {0xF5, 0x43, 0}, {0xF6, 0x00, 0}, {0xF7, 0x00, 0}, | |
709 | {0xF8, 0x46, 0}, {0xF9, 0xA4, 0}, {0xFA, 0x00, 0}, {0xFB, 0x00, 0}, | |
710 | {0xFC, 0x96, 0}, {0xFD, 0xA4, 0}, {0xFE, 0x00, 0}, {0xFF, 0x00, 0}, | |
711 | ||
712 | {0x58, 0x4B, 1}, {0x59, 0x00, 1}, {0x5A, 0x4B, 1}, {0x5B, 0x00, 1}, | |
713 | {0x60, 0x4B, 1}, {0x61, 0x09, 1}, {0x62, 0x4B, 1}, {0x63, 0x09, 1}, | |
714 | {0xCE, 0x0F, 1}, {0xCF, 0x00, 1}, {0xE0, 0xFF, 1}, {0xE1, 0x0F, 1}, | |
715 | {0xE2, 0x00, 1}, {0xF0, 0x4E, 1}, {0xF1, 0x01, 1}, {0xF2, 0x02, 1}, | |
716 | {0xF3, 0x03, 1}, {0xF4, 0x04, 1}, {0xF5, 0x05, 1}, {0xF6, 0x06, 1}, | |
717 | {0xF7, 0x07, 1}, {0xF8, 0x08, 1}, | |
718 | ||
719 | {0x4E, 0x00, 2}, {0x0C, 0x04, 2}, {0x21, 0x61, 2}, {0x22, 0x68, 2}, | |
720 | {0x23, 0x6F, 2}, {0x24, 0x76, 2}, {0x25, 0x7D, 2}, {0x26, 0x84, 2}, | |
721 | {0x27, 0x8D, 2}, {0x4D, 0x08, 2}, {0x50, 0x05, 2}, {0x51, 0xF5, 2}, | |
722 | {0x52, 0x04, 2}, {0x53, 0xA0, 2}, {0x54, 0x1F, 2}, {0x55, 0x23, 2}, | |
723 | {0x56, 0x45, 2}, {0x57, 0x67, 2}, {0x58, 0x08, 2}, {0x59, 0x08, 2}, | |
724 | {0x5A, 0x08, 2}, {0x5B, 0x08, 2}, {0x60, 0x08, 2}, {0x61, 0x08, 2}, | |
725 | {0x62, 0x08, 2}, {0x63, 0x08, 2}, {0x64, 0xCF, 2}, {0x72, 0x56, 2}, | |
726 | {0x73, 0x9A, 2}, | |
727 | ||
728 | {0x34, 0xF0, 0}, {0x35, 0x0F, 0}, {0x5B, 0x40, 0}, {0x84, 0x88, 0}, | |
729 | {0x85, 0x24, 0}, {0x88, 0x54, 0}, {0x8B, 0xB8, 0}, {0x8C, 0x07, 0}, | |
730 | {0x8D, 0x00, 0}, {0x94, 0x1B, 0}, {0x95, 0x12, 0}, {0x96, 0x00, 0}, | |
731 | {0x97, 0x06, 0}, {0x9D, 0x1A, 0}, {0x9F, 0x10, 0}, {0xB4, 0x22, 0}, | |
a027087a | 732 | {0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x4C, 0x00, 2}, |
f8a08c34 | 733 | |
a027087a LF |
734 | {0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0}, {0x8E, 0x08, 0}, |
735 | {0x8F, 0x00, 0} | |
f8a08c34 HTL |
736 | }; |
737 | ||
738 | static int rtl8187b_init_hw(struct ieee80211_hw *dev) | |
739 | { | |
740 | struct rtl8187_priv *priv = dev->priv; | |
741 | int res, i; | |
742 | u8 reg; | |
743 | ||
744 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, | |
745 | RTL818X_EEPROM_CMD_CONFIG); | |
746 | ||
747 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); | |
748 | reg |= RTL818X_CONFIG3_ANAPARAM_WRITE | RTL818X_CONFIG3_GNT_SELECT; | |
749 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg); | |
4ece16a1 HRK |
750 | rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, |
751 | RTL8187B_RTL8225_ANAPARAM2_ON); | |
752 | rtl818x_iowrite32(priv, &priv->map->ANAPARAM, | |
753 | RTL8187B_RTL8225_ANAPARAM_ON); | |
754 | rtl818x_iowrite8(priv, &priv->map->ANAPARAM3, | |
755 | RTL8187B_RTL8225_ANAPARAM3_ON); | |
f8a08c34 HTL |
756 | |
757 | rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10); | |
758 | reg = rtl818x_ioread8(priv, (u8 *)0xFF62); | |
759 | rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5)); | |
760 | rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5)); | |
761 | ||
762 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); | |
763 | reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE; | |
764 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg); | |
765 | ||
766 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, | |
767 | RTL818X_EEPROM_CMD_NORMAL); | |
768 | ||
769 | res = rtl8187_cmd_reset(dev); | |
770 | if (res) | |
771 | return res; | |
772 | ||
773 | rtl818x_iowrite16(priv, (__le16 *)0xFF2D, 0x0FFF); | |
774 | reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); | |
775 | reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT; | |
776 | rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); | |
777 | reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); | |
778 | reg |= RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT | | |
779 | RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT; | |
780 | rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); | |
781 | ||
782 | rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1); | |
f8a08c34 HTL |
783 | |
784 | rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100); | |
785 | rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2); | |
786 | rtl818x_iowrite16_idx(priv, (__le16 *)0xFFD4, 0xFFFF, 1); | |
787 | ||
788 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, | |
789 | RTL818X_EEPROM_CMD_CONFIG); | |
790 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG1); | |
791 | rtl818x_iowrite8(priv, &priv->map->CONFIG1, (reg & 0x3F) | 0x80); | |
792 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, | |
793 | RTL818X_EEPROM_CMD_NORMAL); | |
794 | ||
795 | rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); | |
796 | for (i = 0; i < ARRAY_SIZE(rtl8187b_reg_table); i++) { | |
797 | rtl818x_iowrite8_idx(priv, | |
798 | (u8 *)(uintptr_t) | |
799 | (rtl8187b_reg_table[i][0] | 0xFF00), | |
800 | rtl8187b_reg_table[i][1], | |
801 | rtl8187b_reg_table[i][2]); | |
802 | } | |
803 | ||
804 | rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50); | |
805 | rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0); | |
806 | ||
807 | rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF0, 0, 1); | |
808 | rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF4, 0, 1); | |
809 | rtl818x_iowrite8_idx(priv, (u8 *)0xFFF8, 0, 1); | |
810 | ||
811 | rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00004001); | |
812 | ||
813 | rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x569A, 2); | |
814 | ||
815 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, | |
816 | RTL818X_EEPROM_CMD_CONFIG); | |
817 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); | |
818 | reg |= RTL818X_CONFIG3_ANAPARAM_WRITE; | |
819 | rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg); | |
820 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, | |
821 | RTL818X_EEPROM_CMD_NORMAL); | |
822 | ||
823 | rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480); | |
824 | rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488); | |
825 | rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); | |
2f20596b | 826 | msleep(100); |
f8a08c34 HTL |
827 | |
828 | priv->rf->init(dev); | |
829 | ||
830 | reg = RTL818X_CMD_TX_ENABLE | RTL818X_CMD_RX_ENABLE; | |
831 | rtl818x_iowrite8(priv, &priv->map->CMD, reg); | |
832 | rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); | |
833 | ||
834 | rtl818x_iowrite8(priv, (u8 *)0xFE41, 0xF4); | |
835 | rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x00); | |
836 | rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00); | |
837 | rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01); | |
838 | rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x0F); | |
839 | rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00); | |
840 | rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01); | |
841 | ||
842 | reg = rtl818x_ioread8(priv, (u8 *)0xFFDB); | |
843 | rtl818x_iowrite8(priv, (u8 *)0xFFDB, reg | (1 << 2)); | |
844 | rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x59FA, 3); | |
845 | rtl818x_iowrite16_idx(priv, (__le16 *)0xFF74, 0x59D2, 3); | |
846 | rtl818x_iowrite16_idx(priv, (__le16 *)0xFF76, 0x59D2, 3); | |
847 | rtl818x_iowrite16_idx(priv, (__le16 *)0xFF78, 0x19FA, 3); | |
848 | rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7A, 0x19FA, 3); | |
849 | rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7C, 0x00D0, 3); | |
850 | rtl818x_iowrite8(priv, (u8 *)0xFF61, 0); | |
851 | rtl818x_iowrite8_idx(priv, (u8 *)0xFF80, 0x0F, 1); | |
852 | rtl818x_iowrite8_idx(priv, (u8 *)0xFF83, 0x03, 1); | |
853 | rtl818x_iowrite8(priv, (u8 *)0xFFDA, 0x10); | |
854 | rtl818x_iowrite8_idx(priv, (u8 *)0xFF4D, 0x08, 2); | |
855 | ||
856 | rtl818x_iowrite32(priv, &priv->map->HSSI_PARA, 0x0600321B); | |
857 | ||
858 | rtl818x_iowrite16_idx(priv, (__le16 *)0xFFEC, 0x0800, 1); | |
859 | ||
b4572a92 HRK |
860 | priv->slot_time = 0x9; |
861 | priv->aifsn[0] = 2; /* AIFSN[AC_VO] */ | |
862 | priv->aifsn[1] = 2; /* AIFSN[AC_VI] */ | |
863 | priv->aifsn[2] = 7; /* AIFSN[AC_BK] */ | |
864 | priv->aifsn[3] = 3; /* AIFSN[AC_BE] */ | |
865 | rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0); | |
866 | ||
1a9937b7 HRK |
867 | /* ENEDCA flag must always be set, transmit issues? */ |
868 | rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA); | |
869 | ||
f8a08c34 HTL |
870 | return 0; |
871 | } | |
872 | ||
2f47690e LF |
873 | static void rtl8187_work(struct work_struct *work) |
874 | { | |
875 | /* The RTL8187 returns the retry count through register 0xFFFA. In | |
876 | * addition, it appears to be a cumulative retry count, not the | |
877 | * value for the current TX packet. When multiple TX entries are | |
878 | * queued, the retry count will be valid for the last one in the queue. | |
879 | * The "error" should not matter for purposes of rate setting. */ | |
880 | struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv, | |
881 | work.work); | |
882 | struct ieee80211_tx_info *info; | |
883 | struct ieee80211_hw *dev = priv->dev; | |
884 | static u16 retry; | |
885 | u16 tmp; | |
886 | ||
887 | mutex_lock(&priv->conf_mutex); | |
888 | tmp = rtl818x_ioread16(priv, (__le16 *)0xFFFA); | |
889 | while (skb_queue_len(&priv->b_tx_status.queue) > 0) { | |
890 | struct sk_buff *old_skb; | |
891 | ||
892 | old_skb = skb_dequeue(&priv->b_tx_status.queue); | |
893 | info = IEEE80211_SKB_CB(old_skb); | |
894 | info->status.rates[0].count = tmp - retry + 1; | |
895 | ieee80211_tx_status_irqsafe(dev, old_skb); | |
896 | } | |
897 | retry = tmp; | |
898 | mutex_unlock(&priv->conf_mutex); | |
899 | } | |
900 | ||
4150c572 | 901 | static int rtl8187_start(struct ieee80211_hw *dev) |
605bebe2 MW |
902 | { |
903 | struct rtl8187_priv *priv = dev->priv; | |
904 | u32 reg; | |
905 | int ret; | |
906 | ||
ca9152e3 HRK |
907 | mutex_lock(&priv->conf_mutex); |
908 | ||
f8a08c34 HTL |
909 | ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) : |
910 | rtl8187b_init_hw(dev); | |
605bebe2 | 911 | if (ret) |
ca9152e3 | 912 | goto rtl8187_start_exit; |
c1db52b9 LF |
913 | |
914 | init_usb_anchor(&priv->anchored); | |
2f47690e | 915 | priv->dev = dev; |
c1db52b9 | 916 | |
f8a08c34 HTL |
917 | if (priv->is_rtl8187b) { |
918 | reg = RTL818X_RX_CONF_MGMT | | |
919 | RTL818X_RX_CONF_DATA | | |
920 | RTL818X_RX_CONF_BROADCAST | | |
921 | RTL818X_RX_CONF_NICMAC | | |
922 | RTL818X_RX_CONF_BSSID | | |
923 | (7 << 13 /* RX FIFO threshold NONE */) | | |
924 | (7 << 10 /* MAX RX DMA */) | | |
925 | RTL818X_RX_CONF_RX_AUTORESETPHY | | |
926 | RTL818X_RX_CONF_ONLYERLPKT | | |
927 | RTL818X_RX_CONF_MULTICAST; | |
928 | priv->rx_conf = reg; | |
929 | rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); | |
930 | ||
931 | rtl818x_iowrite32(priv, &priv->map->TX_CONF, | |
932 | RTL818X_TX_CONF_HW_SEQNUM | | |
933 | RTL818X_TX_CONF_DISREQQSIZE | | |
934 | (7 << 8 /* short retry limit */) | | |
935 | (7 << 0 /* long retry limit */) | | |
936 | (7 << 21 /* MAX TX DMA */)); | |
937 | rtl8187_init_urbs(dev); | |
3517afde | 938 | rtl8187b_init_status_urb(dev); |
ca9152e3 | 939 | goto rtl8187_start_exit; |
f8a08c34 HTL |
940 | } |
941 | ||
605bebe2 MW |
942 | rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); |
943 | ||
2fe14263 MW |
944 | rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0); |
945 | rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0); | |
946 | ||
605bebe2 MW |
947 | rtl8187_init_urbs(dev); |
948 | ||
949 | reg = RTL818X_RX_CONF_ONLYERLPKT | | |
950 | RTL818X_RX_CONF_RX_AUTORESETPHY | | |
951 | RTL818X_RX_CONF_BSSID | | |
952 | RTL818X_RX_CONF_MGMT | | |
605bebe2 MW |
953 | RTL818X_RX_CONF_DATA | |
954 | (7 << 13 /* RX FIFO threshold NONE */) | | |
955 | (7 << 10 /* MAX RX DMA */) | | |
956 | RTL818X_RX_CONF_BROADCAST | | |
605bebe2 | 957 | RTL818X_RX_CONF_NICMAC; |
605bebe2 | 958 | |
4150c572 | 959 | priv->rx_conf = reg; |
605bebe2 MW |
960 | rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); |
961 | ||
962 | reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); | |
963 | reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT; | |
964 | reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT; | |
965 | rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); | |
966 | ||
967 | reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); | |
968 | reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT; | |
969 | reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT; | |
970 | reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT; | |
971 | rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); | |
972 | ||
973 | reg = RTL818X_TX_CONF_CW_MIN | | |
974 | (7 << 21 /* MAX TX DMA */) | | |
975 | RTL818X_TX_CONF_NO_ICV; | |
976 | rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg); | |
977 | ||
978 | reg = rtl818x_ioread8(priv, &priv->map->CMD); | |
979 | reg |= RTL818X_CMD_TX_ENABLE; | |
980 | reg |= RTL818X_CMD_RX_ENABLE; | |
981 | rtl818x_iowrite8(priv, &priv->map->CMD, reg); | |
2f47690e | 982 | INIT_DELAYED_WORK(&priv->work, rtl8187_work); |
605bebe2 | 983 | |
ca9152e3 HRK |
984 | rtl8187_start_exit: |
985 | mutex_unlock(&priv->conf_mutex); | |
986 | return ret; | |
605bebe2 MW |
987 | } |
988 | ||
4150c572 | 989 | static void rtl8187_stop(struct ieee80211_hw *dev) |
605bebe2 MW |
990 | { |
991 | struct rtl8187_priv *priv = dev->priv; | |
605bebe2 MW |
992 | struct sk_buff *skb; |
993 | u32 reg; | |
994 | ||
7dcdd073 | 995 | mutex_lock(&priv->conf_mutex); |
605bebe2 MW |
996 | rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); |
997 | ||
998 | reg = rtl818x_ioread8(priv, &priv->map->CMD); | |
999 | reg &= ~RTL818X_CMD_TX_ENABLE; | |
1000 | reg &= ~RTL818X_CMD_RX_ENABLE; | |
1001 | rtl818x_iowrite8(priv, &priv->map->CMD, reg); | |
1002 | ||
f6532111 | 1003 | priv->rf->stop(dev); |
605bebe2 MW |
1004 | |
1005 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); | |
1006 | reg = rtl818x_ioread8(priv, &priv->map->CONFIG4); | |
1007 | rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF); | |
1008 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); | |
1009 | ||
3517afde HRK |
1010 | while ((skb = skb_dequeue(&priv->b_tx_status.queue))) |
1011 | dev_kfree_skb_any(skb); | |
c1db52b9 LF |
1012 | |
1013 | usb_kill_anchored_urbs(&priv->anchored); | |
6a8171f2 HRK |
1014 | mutex_unlock(&priv->conf_mutex); |
1015 | ||
2f47690e LF |
1016 | if (!priv->is_rtl8187b) |
1017 | cancel_delayed_work_sync(&priv->work); | |
605bebe2 MW |
1018 | } |
1019 | ||
1020 | static int rtl8187_add_interface(struct ieee80211_hw *dev, | |
1021 | struct ieee80211_if_init_conf *conf) | |
1022 | { | |
1023 | struct rtl8187_priv *priv = dev->priv; | |
4150c572 | 1024 | int i; |
66aafd9a | 1025 | int ret = -EOPNOTSUPP; |
605bebe2 | 1026 | |
66aafd9a | 1027 | mutex_lock(&priv->conf_mutex); |
05c914fe | 1028 | if (priv->mode != NL80211_IFTYPE_MONITOR) |
66aafd9a | 1029 | goto exit; |
605bebe2 MW |
1030 | |
1031 | switch (conf->type) { | |
05c914fe | 1032 | case NL80211_IFTYPE_STATION: |
605bebe2 MW |
1033 | priv->mode = conf->type; |
1034 | break; | |
1035 | default: | |
66aafd9a | 1036 | goto exit; |
605bebe2 MW |
1037 | } |
1038 | ||
66aafd9a | 1039 | ret = 0; |
aa979a6a HRK |
1040 | priv->vif = conf->vif; |
1041 | ||
4150c572 JB |
1042 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); |
1043 | for (i = 0; i < ETH_ALEN; i++) | |
1044 | rtl818x_iowrite8(priv, &priv->map->MAC[i], | |
1045 | ((u8 *)conf->mac_addr)[i]); | |
1046 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); | |
605bebe2 | 1047 | |
66aafd9a | 1048 | exit: |
7dcdd073 | 1049 | mutex_unlock(&priv->conf_mutex); |
66aafd9a | 1050 | return ret; |
605bebe2 MW |
1051 | } |
1052 | ||
1053 | static void rtl8187_remove_interface(struct ieee80211_hw *dev, | |
1054 | struct ieee80211_if_init_conf *conf) | |
1055 | { | |
1056 | struct rtl8187_priv *priv = dev->priv; | |
7dcdd073 | 1057 | mutex_lock(&priv->conf_mutex); |
05c914fe | 1058 | priv->mode = NL80211_IFTYPE_MONITOR; |
aa979a6a | 1059 | priv->vif = NULL; |
7dcdd073 | 1060 | mutex_unlock(&priv->conf_mutex); |
605bebe2 MW |
1061 | } |
1062 | ||
e8975581 | 1063 | static int rtl8187_config(struct ieee80211_hw *dev, u32 changed) |
605bebe2 MW |
1064 | { |
1065 | struct rtl8187_priv *priv = dev->priv; | |
e8975581 | 1066 | struct ieee80211_conf *conf = &dev->conf; |
f6532111 MW |
1067 | u32 reg; |
1068 | ||
7dcdd073 | 1069 | mutex_lock(&priv->conf_mutex); |
f6532111 MW |
1070 | reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); |
1071 | /* Enable TX loopback on MAC level to avoid TX during channel | |
1072 | * changes, as this has be seen to causes problems and the | |
1073 | * card will stop work until next reset | |
1074 | */ | |
1075 | rtl818x_iowrite32(priv, &priv->map->TX_CONF, | |
1076 | reg | RTL818X_TX_CONF_LOOPBACK_MAC); | |
f6532111 MW |
1077 | priv->rf->set_chan(dev, conf); |
1078 | msleep(10); | |
1079 | rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg); | |
605bebe2 | 1080 | |
605bebe2 MW |
1081 | rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2); |
1082 | rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100); | |
1083 | rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100); | |
1084 | rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100); | |
7dcdd073 | 1085 | mutex_unlock(&priv->conf_mutex); |
605bebe2 MW |
1086 | return 0; |
1087 | } | |
1088 | ||
b4572a92 HRK |
1089 | /* |
1090 | * With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for | |
1091 | * example. Thus we have to use raw values for AC_*_PARAM register addresses. | |
1092 | */ | |
1093 | static __le32 *rtl8187b_ac_addr[4] = { | |
1094 | (__le32 *) 0xFFF0, /* AC_VO */ | |
1095 | (__le32 *) 0xFFF4, /* AC_VI */ | |
1096 | (__le32 *) 0xFFFC, /* AC_BK */ | |
1097 | (__le32 *) 0xFFF8, /* AC_BE */ | |
1098 | }; | |
1099 | ||
1100 | #define SIFS_TIME 0xa | |
1101 | ||
f8288317 HRK |
1102 | static void rtl8187_conf_erp(struct rtl8187_priv *priv, bool use_short_slot, |
1103 | bool use_short_preamble) | |
64761077 | 1104 | { |
f8288317 | 1105 | if (priv->is_rtl8187b) { |
b4572a92 | 1106 | u8 difs, eifs; |
f8288317 | 1107 | u16 ack_timeout; |
b4572a92 | 1108 | int queue; |
f8288317 HRK |
1109 | |
1110 | if (use_short_slot) { | |
b4572a92 | 1111 | priv->slot_time = 0x9; |
f8288317 HRK |
1112 | difs = 0x1c; |
1113 | eifs = 0x53; | |
1114 | } else { | |
b4572a92 | 1115 | priv->slot_time = 0x14; |
f8288317 HRK |
1116 | difs = 0x32; |
1117 | eifs = 0x5b; | |
1118 | } | |
54ac218a | 1119 | rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22); |
b4572a92 | 1120 | rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time); |
f8288317 HRK |
1121 | rtl818x_iowrite8(priv, &priv->map->DIFS, difs); |
1122 | ||
1123 | /* | |
1124 | * BRSR+1 on 8187B is in fact EIFS register | |
1125 | * Value in units of 4 us | |
1126 | */ | |
1127 | rtl818x_iowrite8(priv, (u8 *)&priv->map->BRSR + 1, eifs); | |
1128 | ||
1129 | /* | |
1130 | * For 8187B, CARRIER_SENSE_COUNTER is in fact ack timeout | |
1131 | * register. In units of 4 us like eifs register | |
1132 | * ack_timeout = ack duration + plcp + difs + preamble | |
1133 | */ | |
1134 | ack_timeout = 112 + 48 + difs; | |
1135 | if (use_short_preamble) | |
1136 | ack_timeout += 72; | |
1137 | else | |
1138 | ack_timeout += 144; | |
1139 | rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, | |
1140 | DIV_ROUND_UP(ack_timeout, 4)); | |
b4572a92 HRK |
1141 | |
1142 | for (queue = 0; queue < 4; queue++) | |
1143 | rtl818x_iowrite8(priv, (u8 *) rtl8187b_ac_addr[queue], | |
1144 | priv->aifsn[queue] * priv->slot_time + | |
1145 | SIFS_TIME); | |
f8288317 | 1146 | } else { |
64761077 HRK |
1147 | rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22); |
1148 | if (use_short_slot) { | |
1149 | rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9); | |
1150 | rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14); | |
1151 | rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14); | |
64761077 HRK |
1152 | } else { |
1153 | rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14); | |
1154 | rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24); | |
1155 | rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24); | |
64761077 HRK |
1156 | } |
1157 | } | |
1158 | } | |
1159 | ||
1160 | static void rtl8187_bss_info_changed(struct ieee80211_hw *dev, | |
1161 | struct ieee80211_vif *vif, | |
1162 | struct ieee80211_bss_conf *info, | |
1163 | u32 changed) | |
1164 | { | |
1165 | struct rtl8187_priv *priv = dev->priv; | |
2d0ddec5 JB |
1166 | int i; |
1167 | u8 reg; | |
1168 | ||
1169 | if (changed & BSS_CHANGED_BSSID) { | |
1170 | mutex_lock(&priv->conf_mutex); | |
1171 | for (i = 0; i < ETH_ALEN; i++) | |
1172 | rtl818x_iowrite8(priv, &priv->map->BSSID[i], | |
1173 | info->bssid[i]); | |
1174 | ||
1a9937b7 HRK |
1175 | if (priv->is_rtl8187b) |
1176 | reg = RTL818X_MSR_ENEDCA; | |
1177 | else | |
1178 | reg = 0; | |
1179 | ||
2d0ddec5 | 1180 | if (is_valid_ether_addr(info->bssid)) { |
1a9937b7 | 1181 | reg |= RTL818X_MSR_INFRA; |
2d0ddec5 JB |
1182 | rtl818x_iowrite8(priv, &priv->map->MSR, reg); |
1183 | } else { | |
1a9937b7 | 1184 | reg |= RTL818X_MSR_NO_LINK; |
2d0ddec5 JB |
1185 | rtl818x_iowrite8(priv, &priv->map->MSR, reg); |
1186 | } | |
1187 | ||
1188 | mutex_unlock(&priv->conf_mutex); | |
1189 | } | |
64761077 | 1190 | |
f8288317 HRK |
1191 | if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) |
1192 | rtl8187_conf_erp(priv, info->use_short_slot, | |
1193 | info->use_short_preamble); | |
64761077 HRK |
1194 | } |
1195 | ||
3ac64bee JB |
1196 | static u64 rtl8187_prepare_multicast(struct ieee80211_hw *dev, |
1197 | int mc_count, struct dev_addr_list *mc_list) | |
1198 | { | |
1199 | return mc_count; | |
1200 | } | |
1201 | ||
4150c572 JB |
1202 | static void rtl8187_configure_filter(struct ieee80211_hw *dev, |
1203 | unsigned int changed_flags, | |
1204 | unsigned int *total_flags, | |
3ac64bee | 1205 | u64 multicast) |
4150c572 JB |
1206 | { |
1207 | struct rtl8187_priv *priv = dev->priv; | |
1208 | ||
4150c572 JB |
1209 | if (changed_flags & FIF_FCSFAIL) |
1210 | priv->rx_conf ^= RTL818X_RX_CONF_FCS; | |
1211 | if (changed_flags & FIF_CONTROL) | |
1212 | priv->rx_conf ^= RTL818X_RX_CONF_CTRL; | |
1213 | if (changed_flags & FIF_OTHER_BSS) | |
1214 | priv->rx_conf ^= RTL818X_RX_CONF_MONITOR; | |
3ac64bee | 1215 | if (*total_flags & FIF_ALLMULTI || multicast > 0) |
4150c572 | 1216 | priv->rx_conf |= RTL818X_RX_CONF_MULTICAST; |
2fe14263 MW |
1217 | else |
1218 | priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST; | |
1219 | ||
1220 | *total_flags = 0; | |
4150c572 | 1221 | |
4150c572 JB |
1222 | if (priv->rx_conf & RTL818X_RX_CONF_FCS) |
1223 | *total_flags |= FIF_FCSFAIL; | |
1224 | if (priv->rx_conf & RTL818X_RX_CONF_CTRL) | |
1225 | *total_flags |= FIF_CONTROL; | |
1226 | if (priv->rx_conf & RTL818X_RX_CONF_MONITOR) | |
1227 | *total_flags |= FIF_OTHER_BSS; | |
2fe14263 MW |
1228 | if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST) |
1229 | *total_flags |= FIF_ALLMULTI; | |
4150c572 JB |
1230 | |
1231 | rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf); | |
1232 | } | |
1233 | ||
b4572a92 HRK |
1234 | static int rtl8187_conf_tx(struct ieee80211_hw *dev, u16 queue, |
1235 | const struct ieee80211_tx_queue_params *params) | |
1236 | { | |
1237 | struct rtl8187_priv *priv = dev->priv; | |
1238 | u8 cw_min, cw_max; | |
1239 | ||
1240 | if (queue > 3) | |
1241 | return -EINVAL; | |
1242 | ||
1243 | cw_min = fls(params->cw_min); | |
1244 | cw_max = fls(params->cw_max); | |
1245 | ||
1246 | if (priv->is_rtl8187b) { | |
1247 | priv->aifsn[queue] = params->aifs; | |
1248 | ||
1249 | /* | |
1250 | * This is the structure of AC_*_PARAM registers in 8187B: | |
1251 | * - TXOP limit field, bit offset = 16 | |
1252 | * - ECWmax, bit offset = 12 | |
1253 | * - ECWmin, bit offset = 8 | |
1254 | * - AIFS, bit offset = 0 | |
1255 | */ | |
1256 | rtl818x_iowrite32(priv, rtl8187b_ac_addr[queue], | |
1257 | (params->txop << 16) | (cw_max << 12) | | |
1258 | (cw_min << 8) | (params->aifs * | |
1259 | priv->slot_time + SIFS_TIME)); | |
1260 | } else { | |
1261 | if (queue != 0) | |
1262 | return -EINVAL; | |
1263 | ||
1264 | rtl818x_iowrite8(priv, &priv->map->CW_VAL, | |
1265 | cw_min | (cw_max << 4)); | |
1266 | } | |
1267 | return 0; | |
1268 | } | |
1269 | ||
605bebe2 MW |
1270 | static const struct ieee80211_ops rtl8187_ops = { |
1271 | .tx = rtl8187_tx, | |
4150c572 | 1272 | .start = rtl8187_start, |
605bebe2 MW |
1273 | .stop = rtl8187_stop, |
1274 | .add_interface = rtl8187_add_interface, | |
1275 | .remove_interface = rtl8187_remove_interface, | |
1276 | .config = rtl8187_config, | |
64761077 | 1277 | .bss_info_changed = rtl8187_bss_info_changed, |
3ac64bee | 1278 | .prepare_multicast = rtl8187_prepare_multicast, |
4150c572 | 1279 | .configure_filter = rtl8187_configure_filter, |
ca9152e3 HRK |
1280 | .conf_tx = rtl8187_conf_tx, |
1281 | .rfkill_poll = rtl8187_rfkill_poll | |
605bebe2 MW |
1282 | }; |
1283 | ||
1284 | static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom) | |
1285 | { | |
1286 | struct ieee80211_hw *dev = eeprom->data; | |
1287 | struct rtl8187_priv *priv = dev->priv; | |
1288 | u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); | |
1289 | ||
1290 | eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE; | |
1291 | eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ; | |
1292 | eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK; | |
1293 | eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS; | |
1294 | } | |
1295 | ||
1296 | static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom) | |
1297 | { | |
1298 | struct ieee80211_hw *dev = eeprom->data; | |
1299 | struct rtl8187_priv *priv = dev->priv; | |
1300 | u8 reg = RTL818X_EEPROM_CMD_PROGRAM; | |
1301 | ||
1302 | if (eeprom->reg_data_in) | |
1303 | reg |= RTL818X_EEPROM_CMD_WRITE; | |
1304 | if (eeprom->reg_data_out) | |
1305 | reg |= RTL818X_EEPROM_CMD_READ; | |
1306 | if (eeprom->reg_data_clock) | |
1307 | reg |= RTL818X_EEPROM_CMD_CK; | |
1308 | if (eeprom->reg_chip_select) | |
1309 | reg |= RTL818X_EEPROM_CMD_CS; | |
1310 | ||
1311 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg); | |
1312 | udelay(10); | |
1313 | } | |
1314 | ||
1315 | static int __devinit rtl8187_probe(struct usb_interface *intf, | |
1316 | const struct usb_device_id *id) | |
1317 | { | |
1318 | struct usb_device *udev = interface_to_usbdev(intf); | |
1319 | struct ieee80211_hw *dev; | |
1320 | struct rtl8187_priv *priv; | |
1321 | struct eeprom_93cx6 eeprom; | |
1322 | struct ieee80211_channel *channel; | |
6f7853f3 | 1323 | const char *chip_name; |
605bebe2 MW |
1324 | u16 txpwr, reg; |
1325 | int err, i; | |
1326 | ||
1327 | dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops); | |
1328 | if (!dev) { | |
1329 | printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n"); | |
1330 | return -ENOMEM; | |
1331 | } | |
1332 | ||
1333 | priv = dev->priv; | |
0e25b4ef | 1334 | priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B); |
605bebe2 | 1335 | |
9be6f0d4 JL |
1336 | /* allocate "DMA aware" buffer for register accesses */ |
1337 | priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL); | |
1338 | if (!priv->io_dmabuf) { | |
1339 | err = -ENOMEM; | |
1340 | goto err_free_dev; | |
1341 | } | |
1342 | mutex_init(&priv->io_mutex); | |
1343 | ||
605bebe2 MW |
1344 | SET_IEEE80211_DEV(dev, &intf->dev); |
1345 | usb_set_intfdata(intf, dev); | |
1346 | priv->udev = udev; | |
1347 | ||
1348 | usb_get_dev(udev); | |
1349 | ||
1350 | skb_queue_head_init(&priv->rx_queue); | |
8318d78a JB |
1351 | |
1352 | BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels)); | |
1353 | BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates)); | |
1354 | ||
605bebe2 MW |
1355 | memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels)); |
1356 | memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates)); | |
1357 | priv->map = (struct rtl818x_csr *)0xFF00; | |
8318d78a JB |
1358 | |
1359 | priv->band.band = IEEE80211_BAND_2GHZ; | |
1360 | priv->band.channels = priv->channels; | |
1361 | priv->band.n_channels = ARRAY_SIZE(rtl818x_channels); | |
1362 | priv->band.bitrates = priv->rates; | |
1363 | priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates); | |
1364 | dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; | |
1365 | ||
1366 | ||
05c914fe | 1367 | priv->mode = NL80211_IFTYPE_MONITOR; |
605bebe2 | 1368 | dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | |
a7db74f4 | 1369 | IEEE80211_HW_SIGNAL_DBM | |
0ccd58fc | 1370 | IEEE80211_HW_RX_INCLUDES_FCS; |
605bebe2 | 1371 | |
605bebe2 MW |
1372 | eeprom.data = dev; |
1373 | eeprom.register_read = rtl8187_eeprom_register_read; | |
1374 | eeprom.register_write = rtl8187_eeprom_register_write; | |
1375 | if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6)) | |
1376 | eeprom.width = PCI_EEPROM_WIDTH_93C66; | |
1377 | else | |
1378 | eeprom.width = PCI_EEPROM_WIDTH_93C46; | |
1379 | ||
1380 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); | |
1381 | udelay(10); | |
1382 | ||
1383 | eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR, | |
1384 | (__le16 __force *)dev->wiphy->perm_addr, 3); | |
1385 | if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { | |
1386 | printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly " | |
1387 | "generated MAC address\n"); | |
1388 | random_ether_addr(dev->wiphy->perm_addr); | |
1389 | } | |
1390 | ||
1391 | channel = priv->channels; | |
1392 | for (i = 0; i < 3; i++) { | |
1393 | eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i, | |
1394 | &txpwr); | |
8318d78a JB |
1395 | (*channel++).hw_value = txpwr & 0xFF; |
1396 | (*channel++).hw_value = txpwr >> 8; | |
605bebe2 MW |
1397 | } |
1398 | for (i = 0; i < 2; i++) { | |
1399 | eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i, | |
1400 | &txpwr); | |
8318d78a JB |
1401 | (*channel++).hw_value = txpwr & 0xFF; |
1402 | (*channel++).hw_value = txpwr >> 8; | |
605bebe2 | 1403 | } |
605bebe2 MW |
1404 | |
1405 | eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE, | |
1406 | &priv->txpwr_base); | |
1407 | ||
f6532111 MW |
1408 | reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1; |
1409 | rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1); | |
605bebe2 MW |
1410 | /* 0 means asic B-cut, we should use SW 3 wire |
1411 | * bit-by-bit banging for radio. 1 means we can use | |
1412 | * USB specific request to write radio registers */ | |
1413 | priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3; | |
f6532111 | 1414 | rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); |
605bebe2 MW |
1415 | rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); |
1416 | ||
6f7853f3 HTL |
1417 | if (!priv->is_rtl8187b) { |
1418 | u32 reg32; | |
1419 | reg32 = rtl818x_ioread32(priv, &priv->map->TX_CONF); | |
1420 | reg32 &= RTL818X_TX_CONF_HWVER_MASK; | |
1421 | switch (reg32) { | |
0e25b4ef LF |
1422 | case RTL818X_TX_CONF_R8187vD_B: |
1423 | /* Some RTL8187B devices have a USB ID of 0x8187 | |
1424 | * detect them here */ | |
1425 | chip_name = "RTL8187BvB(early)"; | |
1426 | priv->is_rtl8187b = 1; | |
1427 | priv->hw_rev = RTL8187BvB; | |
1428 | break; | |
1429 | case RTL818X_TX_CONF_R8187vD: | |
6f7853f3 HTL |
1430 | chip_name = "RTL8187vD"; |
1431 | break; | |
1432 | default: | |
1433 | chip_name = "RTL8187vB (default)"; | |
1434 | } | |
1435 | } else { | |
6f7853f3 HTL |
1436 | /* |
1437 | * Force USB request to write radio registers for 8187B, Realtek | |
1438 | * only uses it in their sources | |
1439 | */ | |
1440 | /*if (priv->asic_rev == 0) { | |
1441 | printk(KERN_WARNING "rtl8187: Forcing use of USB " | |
1442 | "requests to write to radio registers\n"); | |
1443 | priv->asic_rev = 1; | |
1444 | }*/ | |
1445 | switch (rtl818x_ioread8(priv, (u8 *)0xFFE1)) { | |
1446 | case RTL818X_R8187B_B: | |
1447 | chip_name = "RTL8187BvB"; | |
1448 | priv->hw_rev = RTL8187BvB; | |
1449 | break; | |
1450 | case RTL818X_R8187B_D: | |
1451 | chip_name = "RTL8187BvD"; | |
1452 | priv->hw_rev = RTL8187BvD; | |
1453 | break; | |
1454 | case RTL818X_R8187B_E: | |
1455 | chip_name = "RTL8187BvE"; | |
1456 | priv->hw_rev = RTL8187BvE; | |
1457 | break; | |
1458 | default: | |
1459 | chip_name = "RTL8187BvB (default)"; | |
1460 | priv->hw_rev = RTL8187BvB; | |
1461 | } | |
1462 | } | |
1463 | ||
0e25b4ef LF |
1464 | if (!priv->is_rtl8187b) { |
1465 | for (i = 0; i < 2; i++) { | |
1466 | eeprom_93cx6_read(&eeprom, | |
1467 | RTL8187_EEPROM_TXPWR_CHAN_6 + i, | |
1468 | &txpwr); | |
1469 | (*channel++).hw_value = txpwr & 0xFF; | |
1470 | (*channel++).hw_value = txpwr >> 8; | |
1471 | } | |
1472 | } else { | |
1473 | eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6, | |
1474 | &txpwr); | |
1475 | (*channel++).hw_value = txpwr & 0xFF; | |
1476 | ||
1477 | eeprom_93cx6_read(&eeprom, 0x0A, &txpwr); | |
1478 | (*channel++).hw_value = txpwr & 0xFF; | |
1479 | ||
1480 | eeprom_93cx6_read(&eeprom, 0x1C, &txpwr); | |
1481 | (*channel++).hw_value = txpwr & 0xFF; | |
1482 | (*channel++).hw_value = txpwr >> 8; | |
1483 | } | |
1484 | ||
94778280 JB |
1485 | /* |
1486 | * XXX: Once this driver supports anything that requires | |
1487 | * beacons it must implement IEEE80211_TX_CTL_ASSIGN_SEQ. | |
1488 | */ | |
f59ac048 LR |
1489 | dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); |
1490 | ||
0e25b4ef LF |
1491 | if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b) |
1492 | printk(KERN_INFO "rtl8187: inconsistency between id with OEM" | |
1493 | " info!\n"); | |
1494 | ||
f6532111 | 1495 | priv->rf = rtl8187_detect_rf(dev); |
0e25b4ef LF |
1496 | dev->extra_tx_headroom = (!priv->is_rtl8187b) ? |
1497 | sizeof(struct rtl8187_tx_hdr) : | |
1498 | sizeof(struct rtl8187b_tx_hdr); | |
1499 | if (!priv->is_rtl8187b) | |
1500 | dev->queues = 1; | |
1501 | else | |
1502 | dev->queues = 4; | |
605bebe2 MW |
1503 | |
1504 | err = ieee80211_register_hw(dev); | |
1505 | if (err) { | |
1506 | printk(KERN_ERR "rtl8187: Cannot register device\n"); | |
9be6f0d4 | 1507 | goto err_free_dmabuf; |
605bebe2 | 1508 | } |
7dcdd073 | 1509 | mutex_init(&priv->conf_mutex); |
3517afde | 1510 | skb_queue_head_init(&priv->b_tx_status.queue); |
605bebe2 | 1511 | |
e174961c JB |
1512 | printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s\n", |
1513 | wiphy_name(dev->wiphy), dev->wiphy->perm_addr, | |
6f7853f3 | 1514 | chip_name, priv->asic_rev, priv->rf->name); |
605bebe2 | 1515 | |
a027087a LF |
1516 | #ifdef CONFIG_RTL8187_LEDS |
1517 | eeprom_93cx6_read(&eeprom, 0x3F, ®); | |
1518 | reg &= 0xFF; | |
1519 | rtl8187_leds_init(dev, reg); | |
1520 | #endif | |
ca9152e3 | 1521 | rtl8187_rfkill_init(dev); |
a027087a | 1522 | |
605bebe2 MW |
1523 | return 0; |
1524 | ||
9be6f0d4 JL |
1525 | err_free_dmabuf: |
1526 | kfree(priv->io_dmabuf); | |
605bebe2 MW |
1527 | err_free_dev: |
1528 | ieee80211_free_hw(dev); | |
1529 | usb_set_intfdata(intf, NULL); | |
1530 | usb_put_dev(udev); | |
1531 | return err; | |
1532 | } | |
1533 | ||
1534 | static void __devexit rtl8187_disconnect(struct usb_interface *intf) | |
1535 | { | |
1536 | struct ieee80211_hw *dev = usb_get_intfdata(intf); | |
1537 | struct rtl8187_priv *priv; | |
1538 | ||
1539 | if (!dev) | |
1540 | return; | |
1541 | ||
a027087a LF |
1542 | #ifdef CONFIG_RTL8187_LEDS |
1543 | rtl8187_leds_exit(dev); | |
1544 | #endif | |
ca9152e3 | 1545 | rtl8187_rfkill_exit(dev); |
605bebe2 MW |
1546 | ieee80211_unregister_hw(dev); |
1547 | ||
1548 | priv = dev->priv; | |
d6e2be98 | 1549 | usb_reset_device(priv->udev); |
605bebe2 | 1550 | usb_put_dev(interface_to_usbdev(intf)); |
9be6f0d4 | 1551 | kfree(priv->io_dmabuf); |
605bebe2 MW |
1552 | ieee80211_free_hw(dev); |
1553 | } | |
1554 | ||
1555 | static struct usb_driver rtl8187_driver = { | |
1556 | .name = KBUILD_MODNAME, | |
1557 | .id_table = rtl8187_table, | |
1558 | .probe = rtl8187_probe, | |
500c1197 | 1559 | .disconnect = __devexit_p(rtl8187_disconnect), |
605bebe2 MW |
1560 | }; |
1561 | ||
1562 | static int __init rtl8187_init(void) | |
1563 | { | |
1564 | return usb_register(&rtl8187_driver); | |
1565 | } | |
1566 | ||
1567 | static void __exit rtl8187_exit(void) | |
1568 | { | |
1569 | usb_deregister(&rtl8187_driver); | |
1570 | } | |
1571 | ||
1572 | module_init(rtl8187_init); | |
1573 | module_exit(rtl8187_exit); |