[mirror_ubuntu-bionic-kernel.git] / drivers / net / wireless / rtl818x.h

/*
 * Definitions for RTL818x hardware
 *
 * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
 * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
 *
 * Based on the r8187 driver, which is:
 * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#ifndef RTL818X_H
#define RTL818X_H

struct rtl818x_csr {
	u8	MAC[6];
	u8	reserved_0[2];
	__le32	MAR[2];
	u8	RX_FIFO_COUNT;
	u8	reserved_1;
	u8	TX_FIFO_COUNT;
	u8	BQREQ;
	u8	reserved_2[4];
	__le32	TSFT[2];
	__le32	TLPDA;
	__le32	TNPDA;
	__le32	THPDA;
	__le16	BRSR;
	u8	BSSID[6];
	u8	RESP_RATE;
	u8	EIFS;
	u8	reserved_3[1];
	u8	CMD;
#define RTL818X_CMD_TX_ENABLE		(1 << 2)
#define RTL818X_CMD_RX_ENABLE		(1 << 3)
#define RTL818X_CMD_RESET		(1 << 4)
	u8	reserved_4[4];
	__le16	INT_MASK;
	__le16	INT_STATUS;
#define RTL818X_INT_RX_OK		(1 <<  0)
#define RTL818X_INT_RX_ERR		(1 <<  1)
#define RTL818X_INT_TXL_OK		(1 <<  2)
#define RTL818X_INT_TXL_ERR		(1 <<  3)
#define RTL818X_INT_RX_DU		(1 <<  4)
#define RTL818X_INT_RX_FO		(1 <<  5)
#define RTL818X_INT_TXN_OK		(1 <<  6)
#define RTL818X_INT_TXN_ERR		(1 <<  7)
#define RTL818X_INT_TXH_OK		(1 <<  8)
#define RTL818X_INT_TXH_ERR		(1 <<  9)
#define RTL818X_INT_TXB_OK		(1 << 10)
#define RTL818X_INT_TXB_ERR		(1 << 11)
#define RTL818X_INT_ATIM		(1 << 12)
#define RTL818X_INT_BEACON		(1 << 13)
#define RTL818X_INT_TIME_OUT		(1 << 14)
#define RTL818X_INT_TX_FO		(1 << 15)
	__le32	TX_CONF;
#define RTL818X_TX_CONF_LOOPBACK_MAC	(1 << 17)
#define RTL818X_TX_CONF_NO_ICV		(1 << 19)
#define RTL818X_TX_CONF_DISCW		(1 << 20)
#define RTL818X_TX_CONF_R8180_ABCD	(2 << 25)
#define RTL818X_TX_CONF_R8180_F		(3 << 25)
#define RTL818X_TX_CONF_R8185_ABC	(4 << 25)
#define RTL818X_TX_CONF_R8185_D		(5 << 25)
#define RTL818X_TX_CONF_HWVER_MASK	(7 << 25)
#define RTL818X_TX_CONF_CW_MIN		(1 << 31)
	__le32	RX_CONF;
#define RTL818X_RX_CONF_MONITOR		(1 <<  0)
#define RTL818X_RX_CONF_NICMAC		(1 <<  1)
#define RTL818X_RX_CONF_MULTICAST	(1 <<  2)
#define RTL818X_RX_CONF_BROADCAST	(1 <<  3)
#define RTL818X_RX_CONF_DATA		(1 << 18)
#define RTL818X_RX_CONF_CTRL		(1 << 19)
#define RTL818X_RX_CONF_MGMT		(1 << 20)
#define RTL818X_RX_CONF_BSSID		(1 << 23)
#define RTL818X_RX_CONF_RX_AUTORESETPHY	(1 << 28)
#define RTL818X_RX_CONF_ONLYERLPKT	(1 << 31)
	__le32	INT_TIMEOUT;
	__le32	TBDA;
	u8	EEPROM_CMD;
#define RTL818X_EEPROM_CMD_READ		(1 << 0)
#define RTL818X_EEPROM_CMD_WRITE	(1 << 1)
#define RTL818X_EEPROM_CMD_CK		(1 << 2)
#define RTL818X_EEPROM_CMD_CS		(1 << 3)
#define RTL818X_EEPROM_CMD_NORMAL	(0 << 6)
#define RTL818X_EEPROM_CMD_LOAD		(1 << 6)
#define RTL818X_EEPROM_CMD_PROGRAM	(2 << 6)
#define RTL818X_EEPROM_CMD_CONFIG	(3 << 6)
	u8	CONFIG0;
	u8	CONFIG1;
	u8	CONFIG2;
	__le32	ANAPARAM;
	u8	MSR;
#define RTL818X_MSR_NO_LINK		(0 << 2)
#define RTL818X_MSR_ADHOC		(1 << 2)
#define RTL818X_MSR_INFRA		(2 << 2)
	u8	CONFIG3;
#define RTL818X_CONFIG3_ANAPARAM_WRITE	(1 << 6)
	u8	CONFIG4;
#define RTL818X_CONFIG4_POWEROFF	(1 << 6)
#define RTL818X_CONFIG4_VCOOFF		(1 << 7)
	u8	TESTR;
	u8	reserved_9[2];
	__le16	PGSELECT;
	__le32	ANAPARAM2;
	u8	reserved_10[12];
	__le16	BEACON_INTERVAL;
	__le16	ATIM_WND;
	__le16	BEACON_INTERVAL_TIME;
	__le16	ATIMTR_INTERVAL;
	u8	reserved_11[4];
	u8	PHY[4];
	__le16	RFPinsOutput;
	__le16	RFPinsEnable;
	__le16	RFPinsSelect;
	__le16	RFPinsInput;
	__le32	RF_PARA;
	__le32	RF_TIMING;
	u8	GP_ENABLE;
	u8	GPIO;
	u8	reserved_12[10];
	u8	TX_AGC_CTL;
#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT		(1 << 0)
#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT	(1 << 1)
#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT			(1 << 2)
	u8	TX_GAIN_CCK;
	u8	TX_GAIN_OFDM;
	u8	TX_ANTENNA;
	u8	reserved_13[16];
	u8	WPA_CONF;
	u8	reserved_14[3];
	u8	SIFS;
	u8	DIFS;
	u8	SLOT;
	u8	reserved_15[5];
	u8	CW_CONF;
#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT	(1 << 0)
#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT	(1 << 1)
	u8	CW_VAL;
	u8	RATE_FALLBACK;
	u8	reserved_16[25];
	u8	CONFIG5;
	u8	TX_DMA_POLLING;
	u8	reserved_17[2];
	__le16	CWR;
	u8	RETRY_CTR;
	u8	reserved_18[5];
	__le32	RDSAR;
	u8	reserved_19[18];
	u16	TALLY_CNT;
	u8	TALLY_SEL;
} __attribute__((packed));

static const struct ieee80211_rate rtl818x_rates[] = {
	{ .rate = 10,
	  .val = 0,
	  .flags = IEEE80211_RATE_CCK },
	{ .rate = 20,
	  .val = 1,
	  .flags = IEEE80211_RATE_CCK },
	{ .rate = 55,
	  .val = 2,
	  .flags = IEEE80211_RATE_CCK },
	{ .rate = 110,
	  .val = 3,
	  .flags = IEEE80211_RATE_CCK },
	{ .rate = 60,
	  .val = 4,
	  .flags = IEEE80211_RATE_OFDM },
	{ .rate = 90,
	  .val = 5,
	  .flags = IEEE80211_RATE_OFDM },
	{ .rate = 120,
	  .val = 6,
	  .flags = IEEE80211_RATE_OFDM },
	{ .rate = 180,
	  .val = 7,
	  .flags = IEEE80211_RATE_OFDM },
	{ .rate = 240,
	  .val = 8,
	  .flags = IEEE80211_RATE_OFDM },
	{ .rate = 360,
	  .val = 9,
	  .flags = IEEE80211_RATE_OFDM },
	{ .rate = 480,
	  .val = 10,
	  .flags = IEEE80211_RATE_OFDM },
	{ .rate = 540,
	  .val = 11,
	  .flags = IEEE80211_RATE_OFDM },
};

static const struct ieee80211_channel rtl818x_channels[] = {
	{ .chan = 1,
	  .freq = 2412},
	{ .chan = 2,
	  .freq = 2417},
	{ .chan = 3,
	  .freq = 2422},
	{ .chan = 4,
	  .freq = 2427},
	{ .chan = 5,
	  .freq = 2432},
	{ .chan = 6,
	  .freq = 2437},
	{ .chan = 7,
	  .freq = 2442},
	{ .chan = 8,
	  .freq = 2447},
	{ .chan = 9,
	  .freq = 2452},
	{ .chan = 10,
	  .freq = 2457},
	{ .chan = 11,
	  .freq = 2462},
	{ .chan = 12,
	  .freq = 2467},
	{ .chan = 13,
	  .freq = 2472},
	{ .chan = 14,
	  .freq = 2484}
};

#endif /* RTL818X_H */
Commit	Line	Data
0aec00ae JL	1	/*
	2	* Definitions for RTL818x hardware
	3	*
	4	* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
	5	* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
	6	*
	7	* Based on the r8187 driver, which is:
	8	* Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
	9	*
	10	* This program is free software; you can redistribute it and/or modify
	11	* it under the terms of the GNU General Public License version 2 as
	12	* published by the Free Software Foundation.
	13	*/
	14
605bebe2 MW	15	#ifndef RTL818X_H
	16	#define RTL818X_H
	17
	18	struct rtl818x_csr {
	19	u8 MAC[6];
	20	u8 reserved_0[2];
	21	__le32 MAR[2];
	22	u8 RX_FIFO_COUNT;
	23	u8 reserved_1;
	24	u8 TX_FIFO_COUNT;
	25	u8 BQREQ;
	26	u8 reserved_2[4];
	27	__le32 TSFT[2];
	28	__le32 TLPDA;
	29	__le32 TNPDA;
	30	__le32 THPDA;
	31	__le16 BRSR;
	32	u8 BSSID[6];
	33	u8 RESP_RATE;
	34	u8 EIFS;
	35	u8 reserved_3[1];
	36	u8 CMD;
	37	#define RTL818X_CMD_TX_ENABLE (1 << 2)
	38	#define RTL818X_CMD_RX_ENABLE (1 << 3)
	39	#define RTL818X_CMD_RESET (1 << 4)
	40	u8 reserved_4[4];
	41	__le16 INT_MASK;
	42	__le16 INT_STATUS;
	43	#define RTL818X_INT_RX_OK (1 << 0)
	44	#define RTL818X_INT_RX_ERR (1 << 1)
	45	#define RTL818X_INT_TXL_OK (1 << 2)
	46	#define RTL818X_INT_TXL_ERR (1 << 3)
	47	#define RTL818X_INT_RX_DU (1 << 4)
	48	#define RTL818X_INT_RX_FO (1 << 5)
	49	#define RTL818X_INT_TXN_OK (1 << 6)
	50	#define RTL818X_INT_TXN_ERR (1 << 7)
	51	#define RTL818X_INT_TXH_OK (1 << 8)
	52	#define RTL818X_INT_TXH_ERR (1 << 9)
	53	#define RTL818X_INT_TXB_OK (1 << 10)
	54	#define RTL818X_INT_TXB_ERR (1 << 11)
	55	#define RTL818X_INT_ATIM (1 << 12)
	56	#define RTL818X_INT_BEACON (1 << 13)
	57	#define RTL818X_INT_TIME_OUT (1 << 14)
	58	#define RTL818X_INT_TX_FO (1 << 15)
	59	__le32 TX_CONF;
	60	#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17)
	61	#define RTL818X_TX_CONF_NO_ICV (1 << 19)
	62	#define RTL818X_TX_CONF_DISCW (1 << 20)
	63	#define RTL818X_TX_CONF_R8180_ABCD (2 << 25)
	64	#define RTL818X_TX_CONF_R8180_F (3 << 25)
	65	#define RTL818X_TX_CONF_R8185_ABC (4 << 25)
	66	#define RTL818X_TX_CONF_R8185_D (5 << 25)
	67	#define RTL818X_TX_CONF_HWVER_MASK (7 << 25)
	68	#define RTL818X_TX_CONF_CW_MIN (1 << 31)
	69	__le32 RX_CONF;
	70	#define RTL818X_RX_CONF_MONITOR (1 << 0)
	71	#define RTL818X_RX_CONF_NICMAC (1 << 1)
	72	#define RTL818X_RX_CONF_MULTICAST (1 << 2)
	73	#define RTL818X_RX_CONF_BROADCAST (1 << 3)
	74	#define RTL818X_RX_CONF_DATA (1 << 18)
	75	#define RTL818X_RX_CONF_CTRL (1 << 19)
	76	#define RTL818X_RX_CONF_MGMT (1 << 20)
	77	#define RTL818X_RX_CONF_BSSID (1 << 23)
	78	#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28)
79	#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31)
80	__le32 INT_TIMEOUT;
81	__le32 TBDA;
82	u8 EEPROM_CMD;
83	#define RTL818X_EEPROM_CMD_READ (1 << 0)
84	#define RTL818X_EEPROM_CMD_WRITE (1 << 1)
85	#define RTL818X_EEPROM_CMD_CK (1 << 2)
86	#define RTL818X_EEPROM_CMD_CS (1 << 3)
87	#define RTL818X_EEPROM_CMD_NORMAL (0 << 6)
88	#define RTL818X_EEPROM_CMD_LOAD (1 << 6)
89	#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6)
90	#define RTL818X_EEPROM_CMD_CONFIG (3 << 6)
91	u8 CONFIG0;
92	u8 CONFIG1;
93	u8 CONFIG2;
94	__le32 ANAPARAM;
95	u8 MSR;
96	#define RTL818X_MSR_NO_LINK (0 << 2)
97	#define RTL818X_MSR_ADHOC (1 << 2)
98	#define RTL818X_MSR_INFRA (2 << 2)
99	u8 CONFIG3;
100	#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6)
101	u8 CONFIG4;
102	#define RTL818X_CONFIG4_POWEROFF (1 << 6)
103	#define RTL818X_CONFIG4_VCOOFF (1 << 7)
104	u8 TESTR;
105	u8 reserved_9[2];
106	__le16 PGSELECT;
107	__le32 ANAPARAM2;
108	u8 reserved_10[12];
109	__le16 BEACON_INTERVAL;
110	__le16 ATIM_WND;
111	__le16 BEACON_INTERVAL_TIME;
112	__le16 ATIMTR_INTERVAL;
113	u8 reserved_11[4];
114	u8 PHY[4];
115	__le16 RFPinsOutput;
116	__le16 RFPinsEnable;
117	__le16 RFPinsSelect;
118	__le16 RFPinsInput;
119	__le32 RF_PARA;
120	__le32 RF_TIMING;
121	u8 GP_ENABLE;
122	u8 GPIO;
123	u8 reserved_12[10];
124	u8 TX_AGC_CTL;
125	#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT (1 << 0)
126	#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT (1 << 1)
127	#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2)
128	u8 TX_GAIN_CCK;
129	u8 TX_GAIN_OFDM;
130	u8 TX_ANTENNA;
131	u8 reserved_13[16];
132	u8 WPA_CONF;
133	u8 reserved_14[3];
134	u8 SIFS;
135	u8 DIFS;
136	u8 SLOT;
137	u8 reserved_15[5];
138	u8 CW_CONF;
139	#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT (1 << 0)
140	#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT (1 << 1)
141	u8 CW_VAL;
142	u8 RATE_FALLBACK;
143	u8 reserved_16[25];
144	u8 CONFIG5;
145	u8 TX_DMA_POLLING;
146	u8 reserved_17[2];
147	__le16 CWR;
148	u8 RETRY_CTR;
149	u8 reserved_18[5];
150	__le32 RDSAR;
151	u8 reserved_19[18];
152	u16 TALLY_CNT;
153	u8 TALLY_SEL;
154	} __attribute__((packed));
155
156	static const struct ieee80211_rate rtl818x_rates[] = {
157	{ .rate = 10,
158	.val = 0,
159	.flags = IEEE80211_RATE_CCK },
160	{ .rate = 20,
161	.val = 1,
162	.flags = IEEE80211_RATE_CCK },
163	{ .rate = 55,
164	.val = 2,
165	.flags = IEEE80211_RATE_CCK },
166	{ .rate = 110,
167	.val = 3,
168	.flags = IEEE80211_RATE_CCK },
169	{ .rate = 60,
170	.val = 4,
171	.flags = IEEE80211_RATE_OFDM },
172	{ .rate = 90,
173	.val = 5,
174	.flags = IEEE80211_RATE_OFDM },
175	{ .rate = 120,
176	.val = 6,
177	.flags = IEEE80211_RATE_OFDM },
178	{ .rate = 180,
179	.val = 7,
180	.flags = IEEE80211_RATE_OFDM },
181	{ .rate = 240,
182	.val = 8,
183	.flags = IEEE80211_RATE_OFDM },
184	{ .rate = 360,
185	.val = 9,
186	.flags = IEEE80211_RATE_OFDM },
187	{ .rate = 480,
188	.val = 10,
189	.flags = IEEE80211_RATE_OFDM },
190	{ .rate = 540,
191	.val = 11,
192	.flags = IEEE80211_RATE_OFDM },
193	};
194
195	static const struct ieee80211_channel rtl818x_channels[] = {
196	{ .chan = 1,
197	.freq = 2412},
198	{ .chan = 2,
199	.freq = 2417},
200	{ .chan = 3,
201	.freq = 2422},
202	{ .chan = 4,
203	.freq = 2427},
204	{ .chan = 5,
205	.freq = 2432},
206	{ .chan = 6,
207	.freq = 2437},
208	{ .chan = 7,
209	.freq = 2442},
210	{ .chan = 8,
211	.freq = 2447},
212	{ .chan = 9,
213	.freq = 2452},
214	{ .chan = 10,
215	.freq = 2457},
216	{ .chan = 11,
217	.freq = 2462},
218	{ .chan = 12,
219	.freq = 2467},
220	{ .chan = 13,
221	.freq = 2472},
222	{ .chan = 14,
223	.freq = 2484}
224	};
225
226	#endif /* RTL818X_H */