]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * This file contains work-arounds for many known PCI hardware | |
3 | * bugs. Devices present only on certain architectures (host | |
4 | * bridges et cetera) should be handled in arch-specific code. | |
5 | * | |
6 | * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. | |
7 | * | |
8 | * Copyright (c) 1999 Martin Mares <mj@ucw.cz> | |
9 | * | |
7586269c DB |
10 | * Init/reset quirks for USB host controllers should be in the |
11 | * USB quirks file, where their drivers can access reuse it. | |
1da177e4 LT |
12 | */ |
13 | ||
1da177e4 LT |
14 | #include <linux/types.h> |
15 | #include <linux/kernel.h> | |
363c75db | 16 | #include <linux/export.h> |
1da177e4 LT |
17 | #include <linux/pci.h> |
18 | #include <linux/init.h> | |
19 | #include <linux/delay.h> | |
25be5e6c | 20 | #include <linux/acpi.h> |
9f23ed3b | 21 | #include <linux/kallsyms.h> |
75e07fc3 | 22 | #include <linux/dmi.h> |
649426ef | 23 | #include <linux/pci-aspm.h> |
32a9a682 | 24 | #include <linux/ioport.h> |
3209874a AV |
25 | #include <linux/sched.h> |
26 | #include <linux/ktime.h> | |
9fe373f9 | 27 | #include <linux/mm.h> |
93177a74 | 28 | #include <asm/dma.h> /* isa_dma_bridge_buggy */ |
bc56b9e0 | 29 | #include "pci.h" |
1da177e4 | 30 | |
253d2e54 JP |
31 | /* |
32 | * Decoding should be disabled for a PCI device during BAR sizing to avoid | |
33 | * conflict. But doing so may cause problems on host bridge and perhaps other | |
34 | * key system devices. For devices that need to have mmio decoding always-on, | |
35 | * we need to set the dev->mmio_always_on bit. | |
36 | */ | |
15856ad5 | 37 | static void quirk_mmio_always_on(struct pci_dev *dev) |
253d2e54 | 38 | { |
52d21b5e | 39 | dev->mmio_always_on = 1; |
253d2e54 | 40 | } |
52d21b5e YL |
41 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, |
42 | PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); | |
253d2e54 | 43 | |
bd8481e1 DT |
44 | /* The Mellanox Tavor device gives false positive parity errors |
45 | * Mark this device with a broken_parity_status, to allow | |
46 | * PCI scanning code to "skip" this now blacklisted device. | |
47 | */ | |
15856ad5 | 48 | static void quirk_mellanox_tavor(struct pci_dev *dev) |
bd8481e1 DT |
49 | { |
50 | dev->broken_parity_status = 1; /* This device gives false positives */ | |
51 | } | |
3c78bc61 RD |
52 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, quirk_mellanox_tavor); |
53 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, quirk_mellanox_tavor); | |
bd8481e1 | 54 | |
f7625980 | 55 | /* Deal with broken BIOSes that neglect to enable passive release, |
1da177e4 | 56 | which can cause problems in combination with the 82441FX/PPro MTRRs */ |
1597cacb | 57 | static void quirk_passive_release(struct pci_dev *dev) |
1da177e4 LT |
58 | { |
59 | struct pci_dev *d = NULL; | |
60 | unsigned char dlc; | |
61 | ||
62 | /* We have to make sure a particular bit is set in the PIIX3 | |
63 | ISA bridge, so we have to go out and find it. */ | |
64 | while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { | |
65 | pci_read_config_byte(d, 0x82, &dlc); | |
66 | if (!(dlc & 1<<1)) { | |
999da9fd | 67 | dev_info(&d->dev, "PIIX3: Enabling Passive Release\n"); |
1da177e4 LT |
68 | dlc |= 1<<1; |
69 | pci_write_config_byte(d, 0x82, dlc); | |
70 | } | |
71 | } | |
72 | } | |
652c538e AM |
73 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); |
74 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); | |
1da177e4 LT |
75 | |
76 | /* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround | |
77 | but VIA don't answer queries. If you happen to have good contacts at VIA | |
f7625980 BH |
78 | ask them for me please -- Alan |
79 | ||
80 | This appears to be BIOS not version dependent. So presumably there is a | |
1da177e4 | 81 | chipset level fix */ |
f7625980 | 82 | |
15856ad5 | 83 | static void quirk_isa_dma_hangs(struct pci_dev *dev) |
1da177e4 LT |
84 | { |
85 | if (!isa_dma_bridge_buggy) { | |
3c78bc61 | 86 | isa_dma_bridge_buggy = 1; |
f0fda801 | 87 | dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n"); |
1da177e4 LT |
88 | } |
89 | } | |
90 | /* | |
91 | * Its not totally clear which chipsets are the problematic ones | |
92 | * We know 82C586 and 82C596 variants are affected. | |
93 | */ | |
652c538e AM |
94 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); |
95 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); | |
96 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); | |
f7625980 | 97 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); |
652c538e AM |
98 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs); |
99 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs); | |
100 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); | |
1da177e4 | 101 | |
4731fdcf LB |
102 | /* |
103 | * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear | |
104 | * for some HT machines to use C4 w/o hanging. | |
105 | */ | |
15856ad5 | 106 | static void quirk_tigerpoint_bm_sts(struct pci_dev *dev) |
4731fdcf LB |
107 | { |
108 | u32 pmbase; | |
109 | u16 pm1a; | |
110 | ||
111 | pci_read_config_dword(dev, 0x40, &pmbase); | |
112 | pmbase = pmbase & 0xff80; | |
113 | pm1a = inw(pmbase); | |
114 | ||
115 | if (pm1a & 0x10) { | |
116 | dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); | |
117 | outw(0x10, pmbase); | |
118 | } | |
119 | } | |
120 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); | |
121 | ||
1da177e4 LT |
122 | /* |
123 | * Chipsets where PCI->PCI transfers vanish or hang | |
124 | */ | |
15856ad5 | 125 | static void quirk_nopcipci(struct pci_dev *dev) |
1da177e4 | 126 | { |
3c78bc61 | 127 | if ((pci_pci_problems & PCIPCI_FAIL) == 0) { |
f0fda801 | 128 | dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n"); |
1da177e4 LT |
129 | pci_pci_problems |= PCIPCI_FAIL; |
130 | } | |
131 | } | |
652c538e AM |
132 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); |
133 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); | |
236561e5 | 134 | |
15856ad5 | 135 | static void quirk_nopciamd(struct pci_dev *dev) |
236561e5 AC |
136 | { |
137 | u8 rev; | |
138 | pci_read_config_byte(dev, 0x08, &rev); | |
139 | if (rev == 0x13) { | |
140 | /* Erratum 24 */ | |
f0fda801 | 141 | dev_info(&dev->dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n"); |
236561e5 AC |
142 | pci_pci_problems |= PCIAGP_FAIL; |
143 | } | |
144 | } | |
652c538e | 145 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd); |
1da177e4 LT |
146 | |
147 | /* | |
148 | * Triton requires workarounds to be used by the drivers | |
149 | */ | |
15856ad5 | 150 | static void quirk_triton(struct pci_dev *dev) |
1da177e4 | 151 | { |
3c78bc61 | 152 | if ((pci_pci_problems&PCIPCI_TRITON) == 0) { |
f0fda801 | 153 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
154 | pci_pci_problems |= PCIPCI_TRITON; |
155 | } | |
156 | } | |
f7625980 BH |
157 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); |
158 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); | |
159 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); | |
160 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); | |
1da177e4 LT |
161 | |
162 | /* | |
163 | * VIA Apollo KT133 needs PCI latency patch | |
164 | * Made according to a windows driver based patch by George E. Breese | |
165 | * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm | |
3c78bc61 RD |
166 | * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for |
167 | * the info on which Mr Breese based his work. | |
1da177e4 LT |
168 | * |
169 | * Updated based on further information from the site and also on | |
f7625980 | 170 | * information provided by VIA |
1da177e4 | 171 | */ |
1597cacb | 172 | static void quirk_vialatency(struct pci_dev *dev) |
1da177e4 LT |
173 | { |
174 | struct pci_dev *p; | |
1da177e4 LT |
175 | u8 busarb; |
176 | /* Ok we have a potential problem chipset here. Now see if we have | |
177 | a buggy southbridge */ | |
f7625980 | 178 | |
1da177e4 | 179 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); |
3c78bc61 | 180 | if (p != NULL) { |
1da177e4 LT |
181 | /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ |
182 | /* Check for buggy part revisions */ | |
2b1afa87 | 183 | if (p->revision < 0x40 || p->revision > 0x42) |
1da177e4 LT |
184 | goto exit; |
185 | } else { | |
186 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); | |
3c78bc61 | 187 | if (p == NULL) /* No problem parts */ |
1da177e4 | 188 | goto exit; |
1da177e4 | 189 | /* Check for buggy part revisions */ |
2b1afa87 | 190 | if (p->revision < 0x10 || p->revision > 0x12) |
1da177e4 LT |
191 | goto exit; |
192 | } | |
f7625980 | 193 | |
1da177e4 | 194 | /* |
f7625980 | 195 | * Ok we have the problem. Now set the PCI master grant to |
1da177e4 LT |
196 | * occur every master grant. The apparent bug is that under high |
197 | * PCI load (quite common in Linux of course) you can get data | |
198 | * loss when the CPU is held off the bus for 3 bus master requests | |
199 | * This happens to include the IDE controllers.... | |
200 | * | |
201 | * VIA only apply this fix when an SB Live! is present but under | |
25985edc | 202 | * both Linux and Windows this isn't enough, and we have seen |
1da177e4 LT |
203 | * corruption without SB Live! but with things like 3 UDMA IDE |
204 | * controllers. So we ignore that bit of the VIA recommendation.. | |
205 | */ | |
206 | ||
207 | pci_read_config_byte(dev, 0x76, &busarb); | |
f7625980 | 208 | /* Set bit 4 and bi 5 of byte 76 to 0x01 |
1da177e4 LT |
209 | "Master priority rotation on every PCI master grant */ |
210 | busarb &= ~(1<<5); | |
211 | busarb |= (1<<4); | |
212 | pci_write_config_byte(dev, 0x76, busarb); | |
f0fda801 | 213 | dev_info(&dev->dev, "Applying VIA southbridge workaround\n"); |
1da177e4 LT |
214 | exit: |
215 | pci_dev_put(p); | |
216 | } | |
652c538e AM |
217 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); |
218 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); | |
219 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); | |
1597cacb | 220 | /* Must restore this on a resume from RAM */ |
652c538e AM |
221 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); |
222 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); | |
223 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); | |
1da177e4 LT |
224 | |
225 | /* | |
226 | * VIA Apollo VP3 needs ETBF on BT848/878 | |
227 | */ | |
15856ad5 | 228 | static void quirk_viaetbf(struct pci_dev *dev) |
1da177e4 | 229 | { |
3c78bc61 | 230 | if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) { |
f0fda801 | 231 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
232 | pci_pci_problems |= PCIPCI_VIAETBF; |
233 | } | |
234 | } | |
652c538e | 235 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); |
1da177e4 | 236 | |
15856ad5 | 237 | static void quirk_vsfx(struct pci_dev *dev) |
1da177e4 | 238 | { |
3c78bc61 | 239 | if ((pci_pci_problems&PCIPCI_VSFX) == 0) { |
f0fda801 | 240 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
241 | pci_pci_problems |= PCIPCI_VSFX; |
242 | } | |
243 | } | |
652c538e | 244 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx); |
1da177e4 LT |
245 | |
246 | /* | |
247 | * Ali Magik requires workarounds to be used by the drivers | |
248 | * that DMA to AGP space. Latency must be set to 0xA and triton | |
249 | * workaround applied too | |
250 | * [Info kindly provided by ALi] | |
f7625980 | 251 | */ |
15856ad5 | 252 | static void quirk_alimagik(struct pci_dev *dev) |
1da177e4 | 253 | { |
3c78bc61 | 254 | if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) { |
f0fda801 | 255 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
256 | pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; |
257 | } | |
258 | } | |
f7625980 BH |
259 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); |
260 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); | |
1da177e4 LT |
261 | |
262 | /* | |
263 | * Natoma has some interesting boundary conditions with Zoran stuff | |
264 | * at least | |
265 | */ | |
15856ad5 | 266 | static void quirk_natoma(struct pci_dev *dev) |
1da177e4 | 267 | { |
3c78bc61 | 268 | if ((pci_pci_problems&PCIPCI_NATOMA) == 0) { |
f0fda801 | 269 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
270 | pci_pci_problems |= PCIPCI_NATOMA; |
271 | } | |
272 | } | |
f7625980 BH |
273 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); |
274 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); | |
275 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); | |
276 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); | |
277 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); | |
278 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); | |
1da177e4 LT |
279 | |
280 | /* | |
281 | * This chip can cause PCI parity errors if config register 0xA0 is read | |
282 | * while DMAs are occurring. | |
283 | */ | |
15856ad5 | 284 | static void quirk_citrine(struct pci_dev *dev) |
1da177e4 LT |
285 | { |
286 | dev->cfg_size = 0xA0; | |
287 | } | |
652c538e | 288 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine); |
1da177e4 | 289 | |
9f33a2ae JM |
290 | /* |
291 | * This chip can cause bus lockups if config addresses above 0x600 | |
292 | * are read or written. | |
293 | */ | |
294 | static void quirk_nfp6000(struct pci_dev *dev) | |
295 | { | |
296 | dev->cfg_size = 0x600; | |
297 | } | |
c2e771b0 | 298 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP4000, quirk_nfp6000); |
9f33a2ae JM |
299 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000, quirk_nfp6000); |
300 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000_VF, quirk_nfp6000); | |
301 | ||
9fe373f9 DL |
302 | /* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */ |
303 | static void quirk_extend_bar_to_page(struct pci_dev *dev) | |
304 | { | |
305 | int i; | |
306 | ||
307 | for (i = 0; i < PCI_STD_RESOURCE_END; i++) { | |
308 | struct resource *r = &dev->resource[i]; | |
309 | ||
310 | if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) { | |
311 | r->end = PAGE_SIZE - 1; | |
312 | r->start = 0; | |
313 | r->flags |= IORESOURCE_UNSET; | |
314 | dev_info(&dev->dev, "expanded BAR %d to page size: %pR\n", | |
315 | i, r); | |
316 | } | |
317 | } | |
318 | } | |
319 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page); | |
320 | ||
1da177e4 LT |
321 | /* |
322 | * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. | |
323 | * If it's needed, re-allocate the region. | |
324 | */ | |
15856ad5 | 325 | static void quirk_s3_64M(struct pci_dev *dev) |
1da177e4 LT |
326 | { |
327 | struct resource *r = &dev->resource[0]; | |
328 | ||
329 | if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { | |
bd064f0a | 330 | r->flags |= IORESOURCE_UNSET; |
1da177e4 LT |
331 | r->start = 0; |
332 | r->end = 0x3ffffff; | |
333 | } | |
334 | } | |
652c538e AM |
335 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); |
336 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); | |
1da177e4 | 337 | |
06cf35f9 MS |
338 | static void quirk_io(struct pci_dev *dev, int pos, unsigned size, |
339 | const char *name) | |
340 | { | |
341 | u32 region; | |
342 | struct pci_bus_region bus_region; | |
343 | struct resource *res = dev->resource + pos; | |
344 | ||
345 | pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), ®ion); | |
346 | ||
347 | if (!region) | |
348 | return; | |
349 | ||
350 | res->name = pci_name(dev); | |
351 | res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK; | |
352 | res->flags |= | |
353 | (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN); | |
354 | region &= ~(size - 1); | |
355 | ||
356 | /* Convert from PCI bus to resource space */ | |
357 | bus_region.start = region; | |
358 | bus_region.end = region + size - 1; | |
359 | pcibios_bus_to_resource(dev->bus, res, &bus_region); | |
360 | ||
361 | dev_info(&dev->dev, FW_BUG "%s quirk: reg 0x%x: %pR\n", | |
362 | name, PCI_BASE_ADDRESS_0 + (pos << 2), res); | |
363 | } | |
364 | ||
73d2eaac AS |
365 | /* |
366 | * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS | |
367 | * ver. 1.33 20070103) don't set the correct ISA PCI region header info. | |
368 | * BAR0 should be 8 bytes; instead, it may be set to something like 8k | |
369 | * (which conflicts w/ BAR1's memory range). | |
06cf35f9 MS |
370 | * |
371 | * CS553x's ISA PCI BARs may also be read-only (ref: | |
372 | * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward). | |
73d2eaac | 373 | */ |
15856ad5 | 374 | static void quirk_cs5536_vsa(struct pci_dev *dev) |
73d2eaac | 375 | { |
06cf35f9 MS |
376 | static char *name = "CS5536 ISA bridge"; |
377 | ||
73d2eaac | 378 | if (pci_resource_len(dev, 0) != 8) { |
06cf35f9 MS |
379 | quirk_io(dev, 0, 8, name); /* SMB */ |
380 | quirk_io(dev, 1, 256, name); /* GPIO */ | |
381 | quirk_io(dev, 2, 64, name); /* MFGPT */ | |
382 | dev_info(&dev->dev, "%s bug detected (incorrect header); workaround applied\n", | |
383 | name); | |
73d2eaac AS |
384 | } |
385 | } | |
386 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); | |
387 | ||
65195c76 YL |
388 | static void quirk_io_region(struct pci_dev *dev, int port, |
389 | unsigned size, int nr, const char *name) | |
390 | { | |
391 | u16 region; | |
392 | struct pci_bus_region bus_region; | |
393 | struct resource *res = dev->resource + nr; | |
394 | ||
395 | pci_read_config_word(dev, port, ®ion); | |
396 | region &= ~(size - 1); | |
397 | ||
398 | if (!region) | |
399 | return; | |
400 | ||
401 | res->name = pci_name(dev); | |
402 | res->flags = IORESOURCE_IO; | |
403 | ||
404 | /* Convert from PCI bus to resource space */ | |
405 | bus_region.start = region; | |
406 | bus_region.end = region + size - 1; | |
fc279850 | 407 | pcibios_bus_to_resource(dev->bus, res, &bus_region); |
65195c76 YL |
408 | |
409 | if (!pci_claim_resource(dev, nr)) | |
410 | dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name); | |
411 | } | |
1da177e4 LT |
412 | |
413 | /* | |
414 | * ATI Northbridge setups MCE the processor if you even | |
415 | * read somewhere between 0x3b0->0x3bb or read 0x3d3 | |
416 | */ | |
15856ad5 | 417 | static void quirk_ati_exploding_mce(struct pci_dev *dev) |
1da177e4 | 418 | { |
f0fda801 | 419 | dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); |
1da177e4 LT |
420 | /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ |
421 | request_region(0x3b0, 0x0C, "RadeonIGP"); | |
422 | request_region(0x3d3, 0x01, "RadeonIGP"); | |
423 | } | |
652c538e | 424 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce); |
1da177e4 | 425 | |
be6646bf HR |
426 | /* |
427 | * In the AMD NL platform, this device ([1022:7912]) has a class code of | |
428 | * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will | |
429 | * claim it. | |
430 | * But the dwc3 driver is a more specific driver for this device, and we'd | |
431 | * prefer to use it instead of xhci. To prevent xhci from claiming the | |
432 | * device, change the class code to 0x0c03fe, which the PCI r3.0 spec | |
433 | * defines as "USB device (not host controller)". The dwc3 driver can then | |
434 | * claim it based on its Vendor and Device ID. | |
435 | */ | |
436 | static void quirk_amd_nl_class(struct pci_dev *pdev) | |
437 | { | |
cd76d10b BH |
438 | u32 class = pdev->class; |
439 | ||
440 | /* Use "USB Device (not host controller)" class */ | |
7b78f48a | 441 | pdev->class = PCI_CLASS_SERIAL_USB_DEVICE; |
cd76d10b BH |
442 | dev_info(&pdev->dev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n", |
443 | class, pdev->class); | |
be6646bf HR |
444 | } |
445 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB, | |
446 | quirk_amd_nl_class); | |
447 | ||
1da177e4 LT |
448 | /* |
449 | * Let's make the southbridge information explicit instead | |
450 | * of having to worry about people probing the ACPI areas, | |
451 | * for example.. (Yes, it happens, and if you read the wrong | |
452 | * ACPI register it will put the machine to sleep with no | |
453 | * way of waking it up again. Bummer). | |
454 | * | |
455 | * ALI M7101: Two IO regions pointed to by words at | |
456 | * 0xE0 (64 bytes of ACPI registers) | |
457 | * 0xE2 (32 bytes of SMB registers) | |
458 | */ | |
15856ad5 | 459 | static void quirk_ali7101_acpi(struct pci_dev *dev) |
1da177e4 | 460 | { |
65195c76 YL |
461 | quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); |
462 | quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); | |
1da177e4 | 463 | } |
652c538e | 464 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi); |
1da177e4 | 465 | |
6693e74a LT |
466 | static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) |
467 | { | |
468 | u32 devres; | |
469 | u32 mask, size, base; | |
470 | ||
471 | pci_read_config_dword(dev, port, &devres); | |
472 | if ((devres & enable) != enable) | |
473 | return; | |
474 | mask = (devres >> 16) & 15; | |
475 | base = devres & 0xffff; | |
476 | size = 16; | |
477 | for (;;) { | |
478 | unsigned bit = size >> 1; | |
479 | if ((bit & mask) == bit) | |
480 | break; | |
481 | size = bit; | |
482 | } | |
483 | /* | |
484 | * For now we only print it out. Eventually we'll want to | |
485 | * reserve it (at least if it's in the 0x1000+ range), but | |
f7625980 | 486 | * let's get enough confirmation reports first. |
6693e74a LT |
487 | */ |
488 | base &= -size; | |
227f0647 RD |
489 | dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, |
490 | base + size - 1); | |
6693e74a LT |
491 | } |
492 | ||
493 | static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) | |
494 | { | |
495 | u32 devres; | |
496 | u32 mask, size, base; | |
497 | ||
498 | pci_read_config_dword(dev, port, &devres); | |
499 | if ((devres & enable) != enable) | |
500 | return; | |
501 | base = devres & 0xffff0000; | |
502 | mask = (devres & 0x3f) << 16; | |
503 | size = 128 << 16; | |
504 | for (;;) { | |
505 | unsigned bit = size >> 1; | |
506 | if ((bit & mask) == bit) | |
507 | break; | |
508 | size = bit; | |
509 | } | |
510 | /* | |
511 | * For now we only print it out. Eventually we'll want to | |
f7625980 | 512 | * reserve it, but let's get enough confirmation reports first. |
6693e74a LT |
513 | */ |
514 | base &= -size; | |
227f0647 RD |
515 | dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, |
516 | base + size - 1); | |
6693e74a LT |
517 | } |
518 | ||
1da177e4 LT |
519 | /* |
520 | * PIIX4 ACPI: Two IO regions pointed to by longwords at | |
521 | * 0x40 (64 bytes of ACPI registers) | |
08db2a70 | 522 | * 0x90 (16 bytes of SMB registers) |
6693e74a | 523 | * and a few strange programmable PIIX4 device resources. |
1da177e4 | 524 | */ |
15856ad5 | 525 | static void quirk_piix4_acpi(struct pci_dev *dev) |
1da177e4 | 526 | { |
65195c76 | 527 | u32 res_a; |
1da177e4 | 528 | |
65195c76 YL |
529 | quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); |
530 | quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); | |
6693e74a LT |
531 | |
532 | /* Device resource A has enables for some of the other ones */ | |
533 | pci_read_config_dword(dev, 0x5c, &res_a); | |
534 | ||
535 | piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); | |
536 | piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); | |
537 | ||
538 | /* Device resource D is just bitfields for static resources */ | |
539 | ||
540 | /* Device 12 enabled? */ | |
541 | if (res_a & (1 << 29)) { | |
542 | piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); | |
543 | piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); | |
544 | } | |
545 | /* Device 13 enabled? */ | |
546 | if (res_a & (1 << 30)) { | |
547 | piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); | |
548 | piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); | |
549 | } | |
550 | piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); | |
551 | piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); | |
1da177e4 | 552 | } |
652c538e AM |
553 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi); |
554 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi); | |
1da177e4 | 555 | |
cdb97558 JS |
556 | #define ICH_PMBASE 0x40 |
557 | #define ICH_ACPI_CNTL 0x44 | |
558 | #define ICH4_ACPI_EN 0x10 | |
559 | #define ICH6_ACPI_EN 0x80 | |
560 | #define ICH4_GPIOBASE 0x58 | |
561 | #define ICH4_GPIO_CNTL 0x5c | |
562 | #define ICH4_GPIO_EN 0x10 | |
563 | #define ICH6_GPIOBASE 0x48 | |
564 | #define ICH6_GPIO_CNTL 0x4c | |
565 | #define ICH6_GPIO_EN 0x10 | |
566 | ||
1da177e4 LT |
567 | /* |
568 | * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at | |
569 | * 0x40 (128 bytes of ACPI, GPIO & TCO registers) | |
570 | * 0x58 (64 bytes of GPIO I/O space) | |
571 | */ | |
15856ad5 | 572 | static void quirk_ich4_lpc_acpi(struct pci_dev *dev) |
1da177e4 | 573 | { |
cdb97558 | 574 | u8 enable; |
1da177e4 | 575 | |
87e3dc38 JS |
576 | /* |
577 | * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict | |
578 | * with low legacy (and fixed) ports. We don't know the decoding | |
579 | * priority and can't tell whether the legacy device or the one created | |
580 | * here is really at that address. This happens on boards with broken | |
581 | * BIOSes. | |
582 | */ | |
583 | ||
cdb97558 | 584 | pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); |
65195c76 YL |
585 | if (enable & ICH4_ACPI_EN) |
586 | quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, | |
587 | "ICH4 ACPI/GPIO/TCO"); | |
1da177e4 | 588 | |
cdb97558 | 589 | pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable); |
65195c76 YL |
590 | if (enable & ICH4_GPIO_EN) |
591 | quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, | |
592 | "ICH4 GPIO"); | |
1da177e4 | 593 | } |
652c538e AM |
594 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi); |
595 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi); | |
596 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi); | |
597 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi); | |
598 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi); | |
599 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi); | |
600 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi); | |
601 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi); | |
602 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); | |
603 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); | |
1da177e4 | 604 | |
15856ad5 | 605 | static void ich6_lpc_acpi_gpio(struct pci_dev *dev) |
2cea752f | 606 | { |
cdb97558 | 607 | u8 enable; |
2cea752f | 608 | |
cdb97558 | 609 | pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); |
65195c76 YL |
610 | if (enable & ICH6_ACPI_EN) |
611 | quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, | |
612 | "ICH6 ACPI/GPIO/TCO"); | |
2cea752f | 613 | |
cdb97558 | 614 | pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable); |
65195c76 YL |
615 | if (enable & ICH6_GPIO_EN) |
616 | quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, | |
617 | "ICH6 GPIO"); | |
2cea752f | 618 | } |
894886e5 | 619 | |
15856ad5 | 620 | static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) |
894886e5 LT |
621 | { |
622 | u32 val; | |
623 | u32 size, base; | |
624 | ||
625 | pci_read_config_dword(dev, reg, &val); | |
626 | ||
627 | /* Enabled? */ | |
628 | if (!(val & 1)) | |
629 | return; | |
630 | base = val & 0xfffc; | |
631 | if (dynsize) { | |
632 | /* | |
633 | * This is not correct. It is 16, 32 or 64 bytes depending on | |
634 | * register D31:F0:ADh bits 5:4. | |
635 | * | |
636 | * But this gets us at least _part_ of it. | |
637 | */ | |
638 | size = 16; | |
639 | } else { | |
640 | size = 128; | |
641 | } | |
642 | base &= ~(size-1); | |
643 | ||
644 | /* Just print it out for now. We should reserve it after more debugging */ | |
645 | dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); | |
646 | } | |
647 | ||
15856ad5 | 648 | static void quirk_ich6_lpc(struct pci_dev *dev) |
894886e5 LT |
649 | { |
650 | /* Shared ACPI/GPIO decode with all ICH6+ */ | |
651 | ich6_lpc_acpi_gpio(dev); | |
652 | ||
653 | /* ICH6-specific generic IO decode */ | |
654 | ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0); | |
655 | ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1); | |
656 | } | |
657 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); | |
658 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); | |
659 | ||
15856ad5 | 660 | static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) |
894886e5 LT |
661 | { |
662 | u32 val; | |
663 | u32 mask, base; | |
664 | ||
665 | pci_read_config_dword(dev, reg, &val); | |
666 | ||
667 | /* Enabled? */ | |
668 | if (!(val & 1)) | |
669 | return; | |
670 | ||
671 | /* | |
672 | * IO base in bits 15:2, mask in bits 23:18, both | |
673 | * are dword-based | |
674 | */ | |
675 | base = val & 0xfffc; | |
676 | mask = (val >> 16) & 0xfc; | |
677 | mask |= 3; | |
678 | ||
679 | /* Just print it out for now. We should reserve it after more debugging */ | |
680 | dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); | |
681 | } | |
682 | ||
683 | /* ICH7-10 has the same common LPC generic IO decode registers */ | |
15856ad5 | 684 | static void quirk_ich7_lpc(struct pci_dev *dev) |
894886e5 | 685 | { |
5d9c0a79 | 686 | /* We share the common ACPI/GPIO decode with ICH6 */ |
894886e5 LT |
687 | ich6_lpc_acpi_gpio(dev); |
688 | ||
689 | /* And have 4 ICH7+ generic decodes */ | |
690 | ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1"); | |
691 | ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2"); | |
692 | ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3"); | |
693 | ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4"); | |
694 | } | |
695 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc); | |
696 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc); | |
697 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc); | |
698 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc); | |
699 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc); | |
700 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc); | |
701 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc); | |
702 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc); | |
703 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc); | |
704 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc); | |
705 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc); | |
706 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc); | |
707 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc); | |
2cea752f | 708 | |
1da177e4 LT |
709 | /* |
710 | * VIA ACPI: One IO region pointed to by longword at | |
711 | * 0x48 or 0x20 (256 bytes of ACPI registers) | |
712 | */ | |
15856ad5 | 713 | static void quirk_vt82c586_acpi(struct pci_dev *dev) |
1da177e4 | 714 | { |
65195c76 YL |
715 | if (dev->revision & 0x10) |
716 | quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES, | |
717 | "vt82c586 ACPI"); | |
1da177e4 | 718 | } |
652c538e | 719 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi); |
1da177e4 LT |
720 | |
721 | /* | |
722 | * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at | |
723 | * 0x48 (256 bytes of ACPI registers) | |
724 | * 0x70 (128 bytes of hardware monitoring register) | |
725 | * 0x90 (16 bytes of SMB registers) | |
726 | */ | |
15856ad5 | 727 | static void quirk_vt82c686_acpi(struct pci_dev *dev) |
1da177e4 | 728 | { |
1da177e4 LT |
729 | quirk_vt82c586_acpi(dev); |
730 | ||
65195c76 YL |
731 | quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1, |
732 | "vt82c686 HW-mon"); | |
1da177e4 | 733 | |
65195c76 | 734 | quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB"); |
1da177e4 | 735 | } |
652c538e | 736 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi); |
1da177e4 | 737 | |
6d85f29b IK |
738 | /* |
739 | * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at | |
740 | * 0x88 (128 bytes of power management registers) | |
741 | * 0xd0 (16 bytes of SMB registers) | |
742 | */ | |
15856ad5 | 743 | static void quirk_vt8235_acpi(struct pci_dev *dev) |
6d85f29b | 744 | { |
65195c76 YL |
745 | quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); |
746 | quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB"); | |
6d85f29b IK |
747 | } |
748 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); | |
749 | ||
1f56f4a2 GB |
750 | /* |
751 | * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: | |
752 | * Disable fast back-to-back on the secondary bus segment | |
753 | */ | |
15856ad5 | 754 | static void quirk_xio2000a(struct pci_dev *dev) |
1f56f4a2 GB |
755 | { |
756 | struct pci_dev *pdev; | |
757 | u16 command; | |
758 | ||
227f0647 | 759 | dev_warn(&dev->dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n"); |
1f56f4a2 GB |
760 | list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { |
761 | pci_read_config_word(pdev, PCI_COMMAND, &command); | |
762 | if (command & PCI_COMMAND_FAST_BACK) | |
763 | pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); | |
764 | } | |
765 | } | |
766 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, | |
767 | quirk_xio2000a); | |
1da177e4 | 768 | |
f7625980 | 769 | #ifdef CONFIG_X86_IO_APIC |
1da177e4 LT |
770 | |
771 | #include <asm/io_apic.h> | |
772 | ||
773 | /* | |
774 | * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip | |
775 | * devices to the external APIC. | |
776 | * | |
777 | * TODO: When we have device-specific interrupt routers, | |
778 | * this code will go away from quirks. | |
779 | */ | |
1597cacb | 780 | static void quirk_via_ioapic(struct pci_dev *dev) |
1da177e4 LT |
781 | { |
782 | u8 tmp; | |
f7625980 | 783 | |
1da177e4 LT |
784 | if (nr_ioapics < 1) |
785 | tmp = 0; /* nothing routed to external APIC */ | |
786 | else | |
787 | tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ | |
f7625980 | 788 | |
f0fda801 | 789 | dev_info(&dev->dev, "%sbling VIA external APIC routing\n", |
1da177e4 LT |
790 | tmp == 0 ? "Disa" : "Ena"); |
791 | ||
792 | /* Offset 0x58: External APIC IRQ output control */ | |
3c78bc61 | 793 | pci_write_config_byte(dev, 0x58, tmp); |
1da177e4 | 794 | } |
652c538e | 795 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); |
e1a2a51e | 796 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); |
1da177e4 | 797 | |
a1740913 | 798 | /* |
f7625980 | 799 | * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit. |
a1740913 KW |
800 | * This leads to doubled level interrupt rates. |
801 | * Set this bit to get rid of cycle wastage. | |
802 | * Otherwise uncritical. | |
803 | */ | |
1597cacb | 804 | static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) |
a1740913 KW |
805 | { |
806 | u8 misc_control2; | |
807 | #define BYPASS_APIC_DEASSERT 8 | |
808 | ||
809 | pci_read_config_byte(dev, 0x5B, &misc_control2); | |
810 | if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { | |
f0fda801 | 811 | dev_info(&dev->dev, "Bypassing VIA 8237 APIC De-Assert Message\n"); |
a1740913 KW |
812 | pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); |
813 | } | |
814 | } | |
815 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); | |
e1a2a51e | 816 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); |
a1740913 | 817 | |
1da177e4 LT |
818 | /* |
819 | * The AMD io apic can hang the box when an apic irq is masked. | |
820 | * We check all revs >= B0 (yet not in the pre production!) as the bug | |
821 | * is currently marked NoFix | |
822 | * | |
823 | * We have multiple reports of hangs with this chipset that went away with | |
236561e5 | 824 | * noapic specified. For the moment we assume it's the erratum. We may be wrong |
1da177e4 LT |
825 | * of course. However the advice is demonstrably good even if so.. |
826 | */ | |
15856ad5 | 827 | static void quirk_amd_ioapic(struct pci_dev *dev) |
1da177e4 | 828 | { |
44c10138 | 829 | if (dev->revision >= 0x02) { |
f0fda801 | 830 | dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); |
831 | dev_warn(&dev->dev, " : booting with the \"noapic\" option\n"); | |
1da177e4 LT |
832 | } |
833 | } | |
652c538e | 834 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); |
1da177e4 LT |
835 | #endif /* CONFIG_X86_IO_APIC */ |
836 | ||
d556ad4b PO |
837 | /* |
838 | * Some settings of MMRBC can lead to data corruption so block changes. | |
839 | * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide | |
840 | */ | |
15856ad5 | 841 | static void quirk_amd_8131_mmrbc(struct pci_dev *dev) |
d556ad4b | 842 | { |
aa288d4d | 843 | if (dev->subordinate && dev->revision <= 0x12) { |
227f0647 RD |
844 | dev_info(&dev->dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n", |
845 | dev->revision); | |
d556ad4b PO |
846 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; |
847 | } | |
848 | } | |
849 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); | |
1da177e4 | 850 | |
1da177e4 LT |
851 | /* |
852 | * FIXME: it is questionable that quirk_via_acpi | |
853 | * is needed. It shows up as an ISA bridge, and does not | |
854 | * support the PCI_INTERRUPT_LINE register at all. Therefore | |
855 | * it seems like setting the pci_dev's 'irq' to the | |
856 | * value of the ACPI SCI interrupt is only done for convenience. | |
857 | * -jgarzik | |
858 | */ | |
15856ad5 | 859 | static void quirk_via_acpi(struct pci_dev *d) |
1da177e4 LT |
860 | { |
861 | /* | |
862 | * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 | |
863 | */ | |
864 | u8 irq; | |
865 | pci_read_config_byte(d, 0x42, &irq); | |
866 | irq &= 0xf; | |
867 | if (irq && (irq != 2)) | |
868 | d->irq = irq; | |
869 | } | |
652c538e AM |
870 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi); |
871 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi); | |
1da177e4 | 872 | |
09d6029f DD |
873 | |
874 | /* | |
1597cacb | 875 | * VIA bridges which have VLink |
09d6029f | 876 | */ |
1597cacb | 877 | |
c06bb5d4 JD |
878 | static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18; |
879 | ||
880 | static void quirk_via_bridge(struct pci_dev *dev) | |
881 | { | |
882 | /* See what bridge we have and find the device ranges */ | |
883 | switch (dev->device) { | |
884 | case PCI_DEVICE_ID_VIA_82C686: | |
cb7468ef JD |
885 | /* The VT82C686 is special, it attaches to PCI and can have |
886 | any device number. All its subdevices are functions of | |
887 | that single device. */ | |
888 | via_vlink_dev_lo = PCI_SLOT(dev->devfn); | |
889 | via_vlink_dev_hi = PCI_SLOT(dev->devfn); | |
c06bb5d4 JD |
890 | break; |
891 | case PCI_DEVICE_ID_VIA_8237: | |
892 | case PCI_DEVICE_ID_VIA_8237A: | |
893 | via_vlink_dev_lo = 15; | |
894 | break; | |
895 | case PCI_DEVICE_ID_VIA_8235: | |
896 | via_vlink_dev_lo = 16; | |
897 | break; | |
898 | case PCI_DEVICE_ID_VIA_8231: | |
899 | case PCI_DEVICE_ID_VIA_8233_0: | |
900 | case PCI_DEVICE_ID_VIA_8233A: | |
901 | case PCI_DEVICE_ID_VIA_8233C_0: | |
902 | via_vlink_dev_lo = 17; | |
903 | break; | |
904 | } | |
905 | } | |
906 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge); | |
907 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge); | |
908 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge); | |
909 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge); | |
910 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge); | |
911 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge); | |
912 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge); | |
913 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge); | |
09d6029f | 914 | |
1597cacb AC |
915 | /** |
916 | * quirk_via_vlink - VIA VLink IRQ number update | |
917 | * @dev: PCI device | |
918 | * | |
919 | * If the device we are dealing with is on a PIC IRQ we need to | |
920 | * ensure that the IRQ line register which usually is not relevant | |
921 | * for PCI cards, is actually written so that interrupts get sent | |
c06bb5d4 JD |
922 | * to the right place. |
923 | * We only do this on systems where a VIA south bridge was detected, | |
924 | * and only for VIA devices on the motherboard (see quirk_via_bridge | |
925 | * above). | |
1597cacb AC |
926 | */ |
927 | ||
928 | static void quirk_via_vlink(struct pci_dev *dev) | |
25be5e6c LB |
929 | { |
930 | u8 irq, new_irq; | |
931 | ||
c06bb5d4 JD |
932 | /* Check if we have VLink at all */ |
933 | if (via_vlink_dev_lo == -1) | |
09d6029f DD |
934 | return; |
935 | ||
936 | new_irq = dev->irq; | |
937 | ||
938 | /* Don't quirk interrupts outside the legacy IRQ range */ | |
939 | if (!new_irq || new_irq > 15) | |
940 | return; | |
941 | ||
1597cacb | 942 | /* Internal device ? */ |
c06bb5d4 JD |
943 | if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi || |
944 | PCI_SLOT(dev->devfn) < via_vlink_dev_lo) | |
1597cacb AC |
945 | return; |
946 | ||
947 | /* This is an internal VLink device on a PIC interrupt. The BIOS | |
948 | ought to have set this but may not have, so we redo it */ | |
949 | ||
25be5e6c LB |
950 | pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); |
951 | if (new_irq != irq) { | |
f0fda801 | 952 | dev_info(&dev->dev, "VIA VLink IRQ fixup, from %d to %d\n", |
953 | irq, new_irq); | |
25be5e6c LB |
954 | udelay(15); /* unknown if delay really needed */ |
955 | pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); | |
956 | } | |
957 | } | |
1597cacb | 958 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); |
25be5e6c | 959 | |
1da177e4 LT |
960 | /* |
961 | * VIA VT82C598 has its device ID settable and many BIOSes | |
962 | * set it to the ID of VT82C597 for backward compatibility. | |
963 | * We need to switch it off to be able to recognize the real | |
964 | * type of the chip. | |
965 | */ | |
15856ad5 | 966 | static void quirk_vt82c598_id(struct pci_dev *dev) |
1da177e4 LT |
967 | { |
968 | pci_write_config_byte(dev, 0xfc, 0); | |
969 | pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); | |
970 | } | |
652c538e | 971 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id); |
1da177e4 LT |
972 | |
973 | /* | |
974 | * CardBus controllers have a legacy base address that enables them | |
975 | * to respond as i82365 pcmcia controllers. We don't want them to | |
976 | * do this even if the Linux CardBus driver is not loaded, because | |
977 | * the Linux i82365 driver does not (and should not) handle CardBus. | |
978 | */ | |
1597cacb | 979 | static void quirk_cardbus_legacy(struct pci_dev *dev) |
1da177e4 | 980 | { |
1da177e4 LT |
981 | pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); |
982 | } | |
ae9de56b YL |
983 | DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, |
984 | PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); | |
985 | DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, | |
986 | PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); | |
1da177e4 LT |
987 | |
988 | /* | |
989 | * Following the PCI ordering rules is optional on the AMD762. I'm not | |
990 | * sure what the designers were smoking but let's not inhale... | |
991 | * | |
992 | * To be fair to AMD, it follows the spec by default, its BIOS people | |
993 | * who turn it off! | |
994 | */ | |
1597cacb | 995 | static void quirk_amd_ordering(struct pci_dev *dev) |
1da177e4 LT |
996 | { |
997 | u32 pcic; | |
998 | pci_read_config_dword(dev, 0x4C, &pcic); | |
3c78bc61 | 999 | if ((pcic & 6) != 6) { |
1da177e4 | 1000 | pcic |= 6; |
f0fda801 | 1001 | dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n"); |
1da177e4 LT |
1002 | pci_write_config_dword(dev, 0x4C, pcic); |
1003 | pci_read_config_dword(dev, 0x84, &pcic); | |
3c78bc61 | 1004 | pcic |= (1 << 23); /* Required in this mode */ |
1da177e4 LT |
1005 | pci_write_config_dword(dev, 0x84, pcic); |
1006 | } | |
1007 | } | |
652c538e | 1008 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); |
e1a2a51e | 1009 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); |
1da177e4 LT |
1010 | |
1011 | /* | |
1012 | * DreamWorks provided workaround for Dunord I-3000 problem | |
1013 | * | |
1014 | * This card decodes and responds to addresses not apparently | |
1015 | * assigned to it. We force a larger allocation to ensure that | |
1016 | * nothing gets put too close to it. | |
1017 | */ | |
15856ad5 | 1018 | static void quirk_dunord(struct pci_dev *dev) |
1da177e4 | 1019 | { |
3c78bc61 | 1020 | struct resource *r = &dev->resource[1]; |
bd064f0a BH |
1021 | |
1022 | r->flags |= IORESOURCE_UNSET; | |
1da177e4 LT |
1023 | r->start = 0; |
1024 | r->end = 0xffffff; | |
1025 | } | |
652c538e | 1026 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord); |
1da177e4 LT |
1027 | |
1028 | /* | |
1029 | * i82380FB mobile docking controller: its PCI-to-PCI bridge | |
1030 | * is subtractive decoding (transparent), and does indicate this | |
1031 | * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 | |
1032 | * instead of 0x01. | |
1033 | */ | |
15856ad5 | 1034 | static void quirk_transparent_bridge(struct pci_dev *dev) |
1da177e4 LT |
1035 | { |
1036 | dev->transparent = 1; | |
1037 | } | |
652c538e AM |
1038 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); |
1039 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); | |
1da177e4 LT |
1040 | |
1041 | /* | |
1042 | * Common misconfiguration of the MediaGX/Geode PCI master that will | |
1043 | * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 | |
631dd1a8 | 1044 | * datasheets found at http://www.national.com/analog for info on what |
1da177e4 LT |
1045 | * these bits do. <christer@weinigel.se> |
1046 | */ | |
1597cacb | 1047 | static void quirk_mediagx_master(struct pci_dev *dev) |
1da177e4 LT |
1048 | { |
1049 | u8 reg; | |
3c78bc61 | 1050 | |
1da177e4 LT |
1051 | pci_read_config_byte(dev, 0x41, ®); |
1052 | if (reg & 2) { | |
1053 | reg &= ~2; | |
227f0647 RD |
1054 | dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", |
1055 | reg); | |
3c78bc61 | 1056 | pci_write_config_byte(dev, 0x41, reg); |
1da177e4 LT |
1057 | } |
1058 | } | |
652c538e AM |
1059 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); |
1060 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); | |
1da177e4 | 1061 | |
1da177e4 LT |
1062 | /* |
1063 | * Ensure C0 rev restreaming is off. This is normally done by | |
1064 | * the BIOS but in the odd case it is not the results are corruption | |
1065 | * hence the presence of a Linux check | |
1066 | */ | |
1597cacb | 1067 | static void quirk_disable_pxb(struct pci_dev *pdev) |
1da177e4 LT |
1068 | { |
1069 | u16 config; | |
f7625980 | 1070 | |
44c10138 | 1071 | if (pdev->revision != 0x04) /* Only C0 requires this */ |
1da177e4 LT |
1072 | return; |
1073 | pci_read_config_word(pdev, 0x40, &config); | |
1074 | if (config & (1<<6)) { | |
1075 | config &= ~(1<<6); | |
1076 | pci_write_config_word(pdev, 0x40, config); | |
f0fda801 | 1077 | dev_info(&pdev->dev, "C0 revision 450NX. Disabling PCI restreaming\n"); |
1da177e4 LT |
1078 | } |
1079 | } | |
652c538e | 1080 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); |
e1a2a51e | 1081 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); |
1da177e4 | 1082 | |
25e742b2 | 1083 | static void quirk_amd_ide_mode(struct pci_dev *pdev) |
ab17443a | 1084 | { |
5deab536 | 1085 | /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */ |
05a7d22b | 1086 | u8 tmp; |
ab17443a | 1087 | |
05a7d22b CC |
1088 | pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); |
1089 | if (tmp == 0x01) { | |
ab17443a CH |
1090 | pci_read_config_byte(pdev, 0x40, &tmp); |
1091 | pci_write_config_byte(pdev, 0x40, tmp|1); | |
1092 | pci_write_config_byte(pdev, 0x9, 1); | |
1093 | pci_write_config_byte(pdev, 0xa, 6); | |
1094 | pci_write_config_byte(pdev, 0x40, tmp); | |
1095 | ||
c9f89475 | 1096 | pdev->class = PCI_CLASS_STORAGE_SATA_AHCI; |
05a7d22b | 1097 | dev_info(&pdev->dev, "set SATA to AHCI mode\n"); |
ab17443a CH |
1098 | } |
1099 | } | |
05a7d22b | 1100 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); |
e1a2a51e | 1101 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); |
05a7d22b | 1102 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); |
e1a2a51e | 1103 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); |
5deab536 SH |
1104 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); |
1105 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); | |
fafe5c3d SH |
1106 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); |
1107 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); | |
ab17443a | 1108 | |
1da177e4 LT |
1109 | /* |
1110 | * Serverworks CSB5 IDE does not fully support native mode | |
1111 | */ | |
15856ad5 | 1112 | static void quirk_svwks_csb5ide(struct pci_dev *pdev) |
1da177e4 LT |
1113 | { |
1114 | u8 prog; | |
1115 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
1116 | if (prog & 5) { | |
1117 | prog &= ~5; | |
1118 | pdev->class &= ~5; | |
1119 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); | |
368c73d4 | 1120 | /* PCI layer will sort out resources */ |
1da177e4 LT |
1121 | } |
1122 | } | |
652c538e | 1123 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide); |
1da177e4 LT |
1124 | |
1125 | /* | |
1126 | * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same | |
1127 | */ | |
15856ad5 | 1128 | static void quirk_ide_samemode(struct pci_dev *pdev) |
1da177e4 LT |
1129 | { |
1130 | u8 prog; | |
1131 | ||
1132 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
1133 | ||
1134 | if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { | |
f0fda801 | 1135 | dev_info(&pdev->dev, "IDE mode mismatch; forcing legacy mode\n"); |
1da177e4 LT |
1136 | prog &= ~5; |
1137 | pdev->class &= ~5; | |
1138 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); | |
1da177e4 LT |
1139 | } |
1140 | } | |
368c73d4 | 1141 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); |
1da177e4 | 1142 | |
979b1791 AC |
1143 | /* |
1144 | * Some ATA devices break if put into D3 | |
1145 | */ | |
1146 | ||
15856ad5 | 1147 | static void quirk_no_ata_d3(struct pci_dev *pdev) |
979b1791 | 1148 | { |
faa738bb | 1149 | pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; |
979b1791 | 1150 | } |
faa738bb YL |
1151 | /* Quirk the legacy ATA devices only. The AHCI ones are ok */ |
1152 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, | |
1153 | PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); | |
1154 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, | |
1155 | PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); | |
7a661c6f | 1156 | /* ALi loses some register settings that we cannot then restore */ |
faa738bb YL |
1157 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, |
1158 | PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); | |
7a661c6f AC |
1159 | /* VIA comes back fine but we need to keep it alive or ACPI GTM failures |
1160 | occur when mode detecting */ | |
faa738bb YL |
1161 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, |
1162 | PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); | |
979b1791 | 1163 | |
1da177e4 LT |
1164 | /* This was originally an Alpha specific thing, but it really fits here. |
1165 | * The i82375 PCI/EISA bridge appears as non-classified. Fix that. | |
1166 | */ | |
15856ad5 | 1167 | static void quirk_eisa_bridge(struct pci_dev *dev) |
1da177e4 LT |
1168 | { |
1169 | dev->class = PCI_CLASS_BRIDGE_EISA << 8; | |
1170 | } | |
652c538e | 1171 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge); |
1da177e4 | 1172 | |
7daa0c4f | 1173 | |
1da177e4 LT |
1174 | /* |
1175 | * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge | |
1176 | * is not activated. The myth is that Asus said that they do not want the | |
1177 | * users to be irritated by just another PCI Device in the Win98 device | |
f7625980 | 1178 | * manager. (see the file prog/hotplug/README.p4b in the lm_sensors |
1da177e4 LT |
1179 | * package 2.7.0 for details) |
1180 | * | |
f7625980 BH |
1181 | * The SMBus PCI Device can be activated by setting a bit in the ICH LPC |
1182 | * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it | |
d7698edc | 1183 | * becomes necessary to do this tweak in two steps -- the chosen trigger |
1184 | * is either the Host bridge (preferred) or on-board VGA controller. | |
9208ee82 JD |
1185 | * |
1186 | * Note that we used to unhide the SMBus that way on Toshiba laptops | |
1187 | * (Satellite A40 and Tecra M2) but then found that the thermal management | |
1188 | * was done by SMM code, which could cause unsynchronized concurrent | |
1189 | * accesses to the SMBus registers, with potentially bad effects. Thus you | |
1190 | * should be very careful when adding new entries: if SMM is accessing the | |
1191 | * Intel SMBus, this is a very good reason to leave it hidden. | |
a99acc83 JD |
1192 | * |
1193 | * Likewise, many recent laptops use ACPI for thermal management. If the | |
1194 | * ACPI DSDT code accesses the SMBus, then Linux should not access it | |
1195 | * natively, and keeping the SMBus hidden is the right thing to do. If you | |
1196 | * are about to add an entry in the table below, please first disassemble | |
1197 | * the DSDT and double-check that there is no code accessing the SMBus. | |
1da177e4 | 1198 | */ |
9d24a81e | 1199 | static int asus_hides_smbus; |
1da177e4 | 1200 | |
15856ad5 | 1201 | static void asus_hides_smbus_hostbridge(struct pci_dev *dev) |
1da177e4 LT |
1202 | { |
1203 | if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { | |
1204 | if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) | |
3c78bc61 | 1205 | switch (dev->subsystem_device) { |
a00db371 | 1206 | case 0x8025: /* P4B-LX */ |
1da177e4 LT |
1207 | case 0x8070: /* P4B */ |
1208 | case 0x8088: /* P4B533 */ | |
1209 | case 0x1626: /* L3C notebook */ | |
1210 | asus_hides_smbus = 1; | |
1211 | } | |
2f2d39d2 | 1212 | else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) |
3c78bc61 | 1213 | switch (dev->subsystem_device) { |
1da177e4 LT |
1214 | case 0x80b1: /* P4GE-V */ |
1215 | case 0x80b2: /* P4PE */ | |
1216 | case 0x8093: /* P4B533-V */ | |
1217 | asus_hides_smbus = 1; | |
1218 | } | |
2f2d39d2 | 1219 | else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) |
3c78bc61 | 1220 | switch (dev->subsystem_device) { |
1da177e4 LT |
1221 | case 0x8030: /* P4T533 */ |
1222 | asus_hides_smbus = 1; | |
1223 | } | |
2f2d39d2 | 1224 | else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) |
1da177e4 LT |
1225 | switch (dev->subsystem_device) { |
1226 | case 0x8070: /* P4G8X Deluxe */ | |
1227 | asus_hides_smbus = 1; | |
1228 | } | |
2f2d39d2 | 1229 | else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH) |
321311af JD |
1230 | switch (dev->subsystem_device) { |
1231 | case 0x80c9: /* PU-DLS */ | |
1232 | asus_hides_smbus = 1; | |
1233 | } | |
2f2d39d2 | 1234 | else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) |
1da177e4 LT |
1235 | switch (dev->subsystem_device) { |
1236 | case 0x1751: /* M2N notebook */ | |
1237 | case 0x1821: /* M5N notebook */ | |
4096ed0f | 1238 | case 0x1897: /* A6L notebook */ |
1da177e4 LT |
1239 | asus_hides_smbus = 1; |
1240 | } | |
2f2d39d2 | 1241 | else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
1da177e4 LT |
1242 | switch (dev->subsystem_device) { |
1243 | case 0x184b: /* W1N notebook */ | |
1244 | case 0x186a: /* M6Ne notebook */ | |
1245 | asus_hides_smbus = 1; | |
1246 | } | |
2f2d39d2 | 1247 | else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) |
2e45785c JD |
1248 | switch (dev->subsystem_device) { |
1249 | case 0x80f2: /* P4P800-X */ | |
1250 | asus_hides_smbus = 1; | |
1251 | } | |
2f2d39d2 | 1252 | else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) |
acc06632 RM |
1253 | switch (dev->subsystem_device) { |
1254 | case 0x1882: /* M6V notebook */ | |
2d1e1c75 | 1255 | case 0x1977: /* A6VA notebook */ |
acc06632 RM |
1256 | asus_hides_smbus = 1; |
1257 | } | |
1da177e4 LT |
1258 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { |
1259 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
3c78bc61 | 1260 | switch (dev->subsystem_device) { |
1da177e4 LT |
1261 | case 0x088C: /* HP Compaq nc8000 */ |
1262 | case 0x0890: /* HP Compaq nc6000 */ | |
1263 | asus_hides_smbus = 1; | |
1264 | } | |
2f2d39d2 | 1265 | else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) |
1da177e4 LT |
1266 | switch (dev->subsystem_device) { |
1267 | case 0x12bc: /* HP D330L */ | |
e3b1bd57 | 1268 | case 0x12bd: /* HP D530 */ |
74c57428 | 1269 | case 0x006a: /* HP Compaq nx9500 */ |
1da177e4 LT |
1270 | asus_hides_smbus = 1; |
1271 | } | |
677cc644 JD |
1272 | else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) |
1273 | switch (dev->subsystem_device) { | |
1274 | case 0x12bf: /* HP xw4100 */ | |
1275 | asus_hides_smbus = 1; | |
1276 | } | |
3c78bc61 RD |
1277 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { |
1278 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
1279 | switch (dev->subsystem_device) { | |
1280 | case 0xC00C: /* Samsung P35 notebook */ | |
1281 | asus_hides_smbus = 1; | |
1282 | } | |
c87f883e RIZ |
1283 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { |
1284 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
3c78bc61 | 1285 | switch (dev->subsystem_device) { |
c87f883e RIZ |
1286 | case 0x0058: /* Compaq Evo N620c */ |
1287 | asus_hides_smbus = 1; | |
1288 | } | |
d7698edc | 1289 | else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) |
3c78bc61 | 1290 | switch (dev->subsystem_device) { |
d7698edc | 1291 | case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ |
1292 | /* Motherboard doesn't have Host bridge | |
1293 | * subvendor/subdevice IDs, therefore checking | |
1294 | * its on-board VGA controller */ | |
1295 | asus_hides_smbus = 1; | |
1296 | } | |
8293b0f6 | 1297 | else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2) |
3c78bc61 | 1298 | switch (dev->subsystem_device) { |
10260d9a JD |
1299 | case 0x00b8: /* Compaq Evo D510 CMT */ |
1300 | case 0x00b9: /* Compaq Evo D510 SFF */ | |
6b5096e4 | 1301 | case 0x00ba: /* Compaq Evo D510 USDT */ |
8293b0f6 DS |
1302 | /* Motherboard doesn't have Host bridge |
1303 | * subvendor/subdevice IDs and on-board VGA | |
1304 | * controller is disabled if an AGP card is | |
1305 | * inserted, therefore checking USB UHCI | |
1306 | * Controller #1 */ | |
10260d9a JD |
1307 | asus_hides_smbus = 1; |
1308 | } | |
27e46859 KH |
1309 | else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) |
1310 | switch (dev->subsystem_device) { | |
1311 | case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ | |
1312 | /* Motherboard doesn't have host bridge | |
1313 | * subvendor/subdevice IDs, therefore checking | |
1314 | * its on-board VGA controller */ | |
1315 | asus_hides_smbus = 1; | |
1316 | } | |
1da177e4 LT |
1317 | } |
1318 | } | |
652c538e AM |
1319 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); |
1320 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge); | |
1321 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge); | |
1322 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge); | |
677cc644 | 1323 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge); |
652c538e AM |
1324 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge); |
1325 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge); | |
1326 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge); | |
1327 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge); | |
1328 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); | |
1329 | ||
1330 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); | |
8293b0f6 | 1331 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge); |
27e46859 | 1332 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); |
d7698edc | 1333 | |
1597cacb | 1334 | static void asus_hides_smbus_lpc(struct pci_dev *dev) |
1da177e4 LT |
1335 | { |
1336 | u16 val; | |
f7625980 | 1337 | |
1da177e4 LT |
1338 | if (likely(!asus_hides_smbus)) |
1339 | return; | |
1340 | ||
1341 | pci_read_config_word(dev, 0xF2, &val); | |
1342 | if (val & 0x8) { | |
1343 | pci_write_config_word(dev, 0xF2, val & (~0x8)); | |
1344 | pci_read_config_word(dev, 0xF2, &val); | |
1345 | if (val & 0x8) | |
227f0647 RD |
1346 | dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", |
1347 | val); | |
1da177e4 | 1348 | else |
f0fda801 | 1349 | dev_info(&dev->dev, "Enabled i801 SMBus device\n"); |
1da177e4 LT |
1350 | } |
1351 | } | |
652c538e AM |
1352 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); |
1353 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); | |
1354 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); | |
1355 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); | |
1356 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); | |
1357 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); | |
1358 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); | |
e1a2a51e RW |
1359 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); |
1360 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); | |
1361 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); | |
1362 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); | |
1363 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); | |
1364 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); | |
1365 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); | |
1597cacb | 1366 | |
e1a2a51e RW |
1367 | /* It appears we just have one such device. If not, we have a warning */ |
1368 | static void __iomem *asus_rcba_base; | |
1369 | static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) | |
acc06632 | 1370 | { |
e1a2a51e | 1371 | u32 rcba; |
acc06632 RM |
1372 | |
1373 | if (likely(!asus_hides_smbus)) | |
1374 | return; | |
e1a2a51e RW |
1375 | WARN_ON(asus_rcba_base); |
1376 | ||
acc06632 | 1377 | pci_read_config_dword(dev, 0xF0, &rcba); |
e1a2a51e RW |
1378 | /* use bits 31:14, 16 kB aligned */ |
1379 | asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); | |
1380 | if (asus_rcba_base == NULL) | |
1381 | return; | |
1382 | } | |
1383 | ||
1384 | static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) | |
1385 | { | |
1386 | u32 val; | |
1387 | ||
1388 | if (likely(!asus_hides_smbus || !asus_rcba_base)) | |
1389 | return; | |
1390 | /* read the Function Disable register, dword mode only */ | |
1391 | val = readl(asus_rcba_base + 0x3418); | |
1392 | writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */ | |
1393 | } | |
1394 | ||
1395 | static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) | |
1396 | { | |
1397 | if (likely(!asus_hides_smbus || !asus_rcba_base)) | |
1398 | return; | |
1399 | iounmap(asus_rcba_base); | |
1400 | asus_rcba_base = NULL; | |
f0fda801 | 1401 | dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n"); |
acc06632 | 1402 | } |
e1a2a51e RW |
1403 | |
1404 | static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) | |
1405 | { | |
1406 | asus_hides_smbus_lpc_ich6_suspend(dev); | |
1407 | asus_hides_smbus_lpc_ich6_resume_early(dev); | |
1408 | asus_hides_smbus_lpc_ich6_resume(dev); | |
1409 | } | |
652c538e | 1410 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); |
e1a2a51e RW |
1411 | DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); |
1412 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); | |
1413 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); | |
ce007ea5 | 1414 | |
1da177e4 LT |
1415 | /* |
1416 | * SiS 96x south bridge: BIOS typically hides SMBus device... | |
1417 | */ | |
1597cacb | 1418 | static void quirk_sis_96x_smbus(struct pci_dev *dev) |
1da177e4 LT |
1419 | { |
1420 | u8 val = 0; | |
1da177e4 | 1421 | pci_read_config_byte(dev, 0x77, &val); |
2f5c33b3 | 1422 | if (val & 0x10) { |
f0fda801 | 1423 | dev_info(&dev->dev, "Enabling SiS 96x SMBus\n"); |
2f5c33b3 MH |
1424 | pci_write_config_byte(dev, 0x77, val & ~0x10); |
1425 | } | |
1da177e4 | 1426 | } |
652c538e AM |
1427 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); |
1428 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); | |
1429 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); | |
1430 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); | |
e1a2a51e RW |
1431 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); |
1432 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); | |
1433 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); | |
1434 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); | |
1da177e4 | 1435 | |
1da177e4 LT |
1436 | /* |
1437 | * ... This is further complicated by the fact that some SiS96x south | |
1438 | * bridges pretend to be 85C503/5513 instead. In that case see if we | |
1439 | * spotted a compatible north bridge to make sure. | |
1440 | * (pci_find_device doesn't work yet) | |
1441 | * | |
1442 | * We can also enable the sis96x bit in the discovery register.. | |
1443 | */ | |
1da177e4 LT |
1444 | #define SIS_DETECT_REGISTER 0x40 |
1445 | ||
1597cacb | 1446 | static void quirk_sis_503(struct pci_dev *dev) |
1da177e4 LT |
1447 | { |
1448 | u8 reg; | |
1449 | u16 devid; | |
1450 | ||
1451 | pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); | |
1452 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); | |
1453 | pci_read_config_word(dev, PCI_DEVICE_ID, &devid); | |
1454 | if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { | |
1455 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); | |
1456 | return; | |
1457 | } | |
1458 | ||
1da177e4 | 1459 | /* |
2f5c33b3 MH |
1460 | * Ok, it now shows up as a 96x.. run the 96x quirk by |
1461 | * hand in case it has already been processed. | |
1462 | * (depends on link order, which is apparently not guaranteed) | |
1da177e4 LT |
1463 | */ |
1464 | dev->device = devid; | |
2f5c33b3 | 1465 | quirk_sis_96x_smbus(dev); |
1da177e4 | 1466 | } |
652c538e | 1467 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); |
e1a2a51e | 1468 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); |
1da177e4 | 1469 | |
1da177e4 | 1470 | |
e5548e96 BJD |
1471 | /* |
1472 | * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller | |
1473 | * and MC97 modem controller are disabled when a second PCI soundcard is | |
1474 | * present. This patch, tweaking the VT8237 ISA bridge, enables them. | |
1475 | * -- bjd | |
1476 | */ | |
1597cacb | 1477 | static void asus_hides_ac97_lpc(struct pci_dev *dev) |
e5548e96 BJD |
1478 | { |
1479 | u8 val; | |
1480 | int asus_hides_ac97 = 0; | |
1481 | ||
1482 | if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { | |
1483 | if (dev->device == PCI_DEVICE_ID_VIA_8237) | |
1484 | asus_hides_ac97 = 1; | |
1485 | } | |
1486 | ||
1487 | if (!asus_hides_ac97) | |
1488 | return; | |
1489 | ||
1490 | pci_read_config_byte(dev, 0x50, &val); | |
1491 | if (val & 0xc0) { | |
1492 | pci_write_config_byte(dev, 0x50, val & (~0xc0)); | |
1493 | pci_read_config_byte(dev, 0x50, &val); | |
1494 | if (val & 0xc0) | |
227f0647 RD |
1495 | dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", |
1496 | val); | |
e5548e96 | 1497 | else |
f0fda801 | 1498 | dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n"); |
e5548e96 BJD |
1499 | } |
1500 | } | |
652c538e | 1501 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); |
e1a2a51e | 1502 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); |
1597cacb | 1503 | |
77967052 | 1504 | #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) |
15e0c694 AC |
1505 | |
1506 | /* | |
1507 | * If we are using libata we can drive this chip properly but must | |
1508 | * do this early on to make the additional device appear during | |
1509 | * the PCI scanning. | |
1510 | */ | |
5ee2ae7f | 1511 | static void quirk_jmicron_ata(struct pci_dev *pdev) |
15e0c694 | 1512 | { |
e34bb370 | 1513 | u32 conf1, conf5, class; |
15e0c694 AC |
1514 | u8 hdr; |
1515 | ||
1516 | /* Only poke fn 0 */ | |
1517 | if (PCI_FUNC(pdev->devfn)) | |
1518 | return; | |
1519 | ||
5ee2ae7f TH |
1520 | pci_read_config_dword(pdev, 0x40, &conf1); |
1521 | pci_read_config_dword(pdev, 0x80, &conf5); | |
15e0c694 | 1522 | |
5ee2ae7f TH |
1523 | conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ |
1524 | conf5 &= ~(1 << 24); /* Clear bit 24 */ | |
1525 | ||
1526 | switch (pdev->device) { | |
4daedcfe TH |
1527 | case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ |
1528 | case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ | |
5b6ae5ba | 1529 | case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */ |
5ee2ae7f TH |
1530 | /* The controller should be in single function ahci mode */ |
1531 | conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ | |
1532 | break; | |
1533 | ||
1534 | case PCI_DEVICE_ID_JMICRON_JMB365: | |
1535 | case PCI_DEVICE_ID_JMICRON_JMB366: | |
1536 | /* Redirect IDE second PATA port to the right spot */ | |
1537 | conf5 |= (1 << 24); | |
1538 | /* Fall through */ | |
1539 | case PCI_DEVICE_ID_JMICRON_JMB361: | |
1540 | case PCI_DEVICE_ID_JMICRON_JMB363: | |
5b6ae5ba | 1541 | case PCI_DEVICE_ID_JMICRON_JMB369: |
5ee2ae7f TH |
1542 | /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ |
1543 | /* Set the class codes correctly and then direct IDE 0 */ | |
3a9e3a51 | 1544 | conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ |
5ee2ae7f TH |
1545 | break; |
1546 | ||
1547 | case PCI_DEVICE_ID_JMICRON_JMB368: | |
1548 | /* The controller should be in single function IDE mode */ | |
1549 | conf1 |= 0x00C00000; /* Set 22, 23 */ | |
1550 | break; | |
15e0c694 | 1551 | } |
5ee2ae7f TH |
1552 | |
1553 | pci_write_config_dword(pdev, 0x40, conf1); | |
1554 | pci_write_config_dword(pdev, 0x80, conf5); | |
1555 | ||
1556 | /* Update pdev accordingly */ | |
1557 | pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); | |
1558 | pdev->hdr_type = hdr & 0x7f; | |
1559 | pdev->multifunction = !!(hdr & 0x80); | |
e34bb370 TH |
1560 | |
1561 | pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class); | |
1562 | pdev->class = class >> 8; | |
15e0c694 | 1563 | } |
5ee2ae7f TH |
1564 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); |
1565 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); | |
4daedcfe | 1566 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); |
5ee2ae7f | 1567 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); |
5b6ae5ba | 1568 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); |
5ee2ae7f TH |
1569 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); |
1570 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); | |
1571 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); | |
5b6ae5ba | 1572 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); |
e1a2a51e RW |
1573 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); |
1574 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); | |
4daedcfe | 1575 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); |
e1a2a51e | 1576 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); |
5b6ae5ba | 1577 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); |
e1a2a51e RW |
1578 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); |
1579 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); | |
1580 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); | |
5b6ae5ba | 1581 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); |
15e0c694 AC |
1582 | |
1583 | #endif | |
1584 | ||
91f15fb3 ZR |
1585 | static void quirk_jmicron_async_suspend(struct pci_dev *dev) |
1586 | { | |
1587 | if (dev->multifunction) { | |
1588 | device_disable_async_suspend(&dev->dev); | |
1589 | dev_info(&dev->dev, "async suspend disabled to avoid multi-function power-on ordering issue\n"); | |
1590 | } | |
1591 | } | |
1592 | DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend); | |
1593 | DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend); | |
1594 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend); | |
1595 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend); | |
1596 | ||
1da177e4 | 1597 | #ifdef CONFIG_X86_IO_APIC |
15856ad5 | 1598 | static void quirk_alder_ioapic(struct pci_dev *pdev) |
1da177e4 LT |
1599 | { |
1600 | int i; | |
1601 | ||
1602 | if ((pdev->class >> 8) != 0xff00) | |
1603 | return; | |
1604 | ||
1605 | /* the first BAR is the location of the IO APIC...we must | |
1606 | * not touch this (and it's already covered by the fixmap), so | |
1607 | * forcibly insert it into the resource tree */ | |
1608 | if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) | |
1609 | insert_resource(&iomem_resource, &pdev->resource[0]); | |
1610 | ||
1611 | /* The next five BARs all seem to be rubbish, so just clean | |
1612 | * them out */ | |
3c78bc61 | 1613 | for (i = 1; i < 6; i++) |
1da177e4 | 1614 | memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); |
1da177e4 | 1615 | } |
652c538e | 1616 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); |
1da177e4 LT |
1617 | #endif |
1618 | ||
15856ad5 | 1619 | static void quirk_pcie_mch(struct pci_dev *pdev) |
1da177e4 | 1620 | { |
0ba379ec | 1621 | pdev->no_msi = 1; |
1da177e4 | 1622 | } |
652c538e AM |
1623 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch); |
1624 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch); | |
1625 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch); | |
1da177e4 | 1626 | |
4602b88d KA |
1627 | |
1628 | /* | |
1629 | * It's possible for the MSI to get corrupted if shpc and acpi | |
1630 | * are used together on certain PXH-based systems. | |
1631 | */ | |
15856ad5 | 1632 | static void quirk_pcie_pxh(struct pci_dev *dev) |
4602b88d | 1633 | { |
4602b88d | 1634 | dev->no_msi = 1; |
f0fda801 | 1635 | dev_warn(&dev->dev, "PXH quirk detected; SHPC device MSI disabled\n"); |
4602b88d KA |
1636 | } |
1637 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); | |
1638 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); | |
1639 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); | |
1640 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); | |
1641 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); | |
1642 | ||
ffadcc2f KCA |
1643 | /* |
1644 | * Some Intel PCI Express chipsets have trouble with downstream | |
1645 | * device power management. | |
1646 | */ | |
3c78bc61 | 1647 | static void quirk_intel_pcie_pm(struct pci_dev *dev) |
ffadcc2f KCA |
1648 | { |
1649 | pci_pm_d3_delay = 120; | |
1650 | dev->no_d1d2 = 1; | |
1651 | } | |
1652 | ||
1653 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); | |
1654 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); | |
1655 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); | |
1656 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); | |
1657 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); | |
1658 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); | |
1659 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); | |
1660 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); | |
1661 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); | |
1662 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); | |
1663 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); | |
1664 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); | |
1665 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); | |
1666 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); | |
1667 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); | |
1668 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); | |
1669 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); | |
1670 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); | |
1671 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); | |
1672 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); | |
1673 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); | |
4602b88d | 1674 | |
426b3b8d | 1675 | #ifdef CONFIG_X86_IO_APIC |
e1d3a908 SA |
1676 | /* |
1677 | * Boot interrupts on some chipsets cannot be turned off. For these chipsets, | |
1678 | * remap the original interrupt in the linux kernel to the boot interrupt, so | |
1679 | * that a PCI device's interrupt handler is installed on the boot interrupt | |
1680 | * line instead. | |
1681 | */ | |
1682 | static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) | |
1683 | { | |
41b9eb26 | 1684 | if (noioapicquirk || noioapicreroute) |
e1d3a908 SA |
1685 | return; |
1686 | ||
1687 | dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; | |
fdcdaf6c BH |
1688 | dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n", |
1689 | dev->vendor, dev->device); | |
e1d3a908 | 1690 | } |
88d1dce3 OD |
1691 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); |
1692 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); | |
1693 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); | |
1694 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); | |
1695 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); | |
1696 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); | |
1697 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); | |
1698 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); | |
1699 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); | |
1700 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); | |
1701 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); | |
1702 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); | |
1703 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); | |
1704 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); | |
1705 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); | |
1706 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); | |
e1d3a908 | 1707 | |
426b3b8d SA |
1708 | /* |
1709 | * On some chipsets we can disable the generation of legacy INTx boot | |
1710 | * interrupts. | |
1711 | */ | |
1712 | ||
1713 | /* | |
1714 | * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no | |
1715 | * 300641-004US, section 5.7.3. | |
1716 | */ | |
1717 | #define INTEL_6300_IOAPIC_ABAR 0x40 | |
1718 | #define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) | |
1719 | ||
1720 | static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) | |
1721 | { | |
1722 | u16 pci_config_word; | |
1723 | ||
1724 | if (noioapicquirk) | |
1725 | return; | |
1726 | ||
1727 | pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); | |
1728 | pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; | |
1729 | pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); | |
1730 | ||
fdcdaf6c BH |
1731 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
1732 | dev->vendor, dev->device); | |
426b3b8d | 1733 | } |
f7625980 BH |
1734 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); |
1735 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); | |
77251188 OD |
1736 | |
1737 | /* | |
1738 | * disable boot interrupts on HT-1000 | |
1739 | */ | |
1740 | #define BC_HT1000_FEATURE_REG 0x64 | |
1741 | #define BC_HT1000_PIC_REGS_ENABLE (1<<0) | |
1742 | #define BC_HT1000_MAP_IDX 0xC00 | |
1743 | #define BC_HT1000_MAP_DATA 0xC01 | |
1744 | ||
1745 | static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) | |
1746 | { | |
1747 | u32 pci_config_dword; | |
1748 | u8 irq; | |
1749 | ||
1750 | if (noioapicquirk) | |
1751 | return; | |
1752 | ||
1753 | pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); | |
1754 | pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | | |
1755 | BC_HT1000_PIC_REGS_ENABLE); | |
1756 | ||
1757 | for (irq = 0x10; irq < 0x10 + 32; irq++) { | |
1758 | outb(irq, BC_HT1000_MAP_IDX); | |
1759 | outb(0x00, BC_HT1000_MAP_DATA); | |
1760 | } | |
1761 | ||
1762 | pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); | |
1763 | ||
fdcdaf6c BH |
1764 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
1765 | dev->vendor, dev->device); | |
77251188 | 1766 | } |
f7625980 BH |
1767 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); |
1768 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); | |
542622da OD |
1769 | |
1770 | /* | |
1771 | * disable boot interrupts on AMD and ATI chipsets | |
1772 | */ | |
1773 | /* | |
1774 | * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 | |
1775 | * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode | |
1776 | * (due to an erratum). | |
1777 | */ | |
1778 | #define AMD_813X_MISC 0x40 | |
1779 | #define AMD_813X_NOIOAMODE (1<<0) | |
4fd8bdc5 | 1780 | #define AMD_813X_REV_B1 0x12 |
bbe19443 | 1781 | #define AMD_813X_REV_B2 0x13 |
542622da OD |
1782 | |
1783 | static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) | |
1784 | { | |
1785 | u32 pci_config_dword; | |
1786 | ||
1787 | if (noioapicquirk) | |
1788 | return; | |
4fd8bdc5 SA |
1789 | if ((dev->revision == AMD_813X_REV_B1) || |
1790 | (dev->revision == AMD_813X_REV_B2)) | |
bbe19443 | 1791 | return; |
542622da OD |
1792 | |
1793 | pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); | |
1794 | pci_config_dword &= ~AMD_813X_NOIOAMODE; | |
1795 | pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); | |
1796 | ||
fdcdaf6c BH |
1797 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
1798 | dev->vendor, dev->device); | |
542622da | 1799 | } |
4fd8bdc5 SA |
1800 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); |
1801 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); | |
1802 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); | |
1803 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); | |
542622da OD |
1804 | |
1805 | #define AMD_8111_PCI_IRQ_ROUTING 0x56 | |
1806 | ||
1807 | static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) | |
1808 | { | |
1809 | u16 pci_config_word; | |
1810 | ||
1811 | if (noioapicquirk) | |
1812 | return; | |
1813 | ||
1814 | pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); | |
1815 | if (!pci_config_word) { | |
227f0647 RD |
1816 | dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] already disabled\n", |
1817 | dev->vendor, dev->device); | |
542622da OD |
1818 | return; |
1819 | } | |
1820 | pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); | |
fdcdaf6c BH |
1821 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
1822 | dev->vendor, dev->device); | |
542622da | 1823 | } |
f7625980 BH |
1824 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); |
1825 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); | |
426b3b8d SA |
1826 | #endif /* CONFIG_X86_IO_APIC */ |
1827 | ||
33dced2e SS |
1828 | /* |
1829 | * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size | |
1830 | * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. | |
1831 | * Re-allocate the region if needed... | |
1832 | */ | |
15856ad5 | 1833 | static void quirk_tc86c001_ide(struct pci_dev *dev) |
33dced2e SS |
1834 | { |
1835 | struct resource *r = &dev->resource[0]; | |
1836 | ||
1837 | if (r->start & 0x8) { | |
bd064f0a | 1838 | r->flags |= IORESOURCE_UNSET; |
33dced2e SS |
1839 | r->start = 0; |
1840 | r->end = 0xf; | |
1841 | } | |
1842 | } | |
1843 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, | |
1844 | PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, | |
1845 | quirk_tc86c001_ide); | |
1846 | ||
21c5fd97 IA |
1847 | /* |
1848 | * PLX PCI 9050 PCI Target bridge controller has an errata that prevents the | |
1849 | * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o) | |
1850 | * being read correctly if bit 7 of the base address is set. | |
1851 | * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128). | |
1852 | * Re-allocate the regions to a 256-byte boundary if necessary. | |
1853 | */ | |
193c0d68 | 1854 | static void quirk_plx_pci9050(struct pci_dev *dev) |
21c5fd97 IA |
1855 | { |
1856 | unsigned int bar; | |
1857 | ||
1858 | /* Fixed in revision 2 (PCI 9052). */ | |
1859 | if (dev->revision >= 2) | |
1860 | return; | |
1861 | for (bar = 0; bar <= 1; bar++) | |
1862 | if (pci_resource_len(dev, bar) == 0x80 && | |
1863 | (pci_resource_start(dev, bar) & 0x80)) { | |
1864 | struct resource *r = &dev->resource[bar]; | |
227f0647 | 1865 | dev_info(&dev->dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", |
21c5fd97 | 1866 | bar); |
bd064f0a | 1867 | r->flags |= IORESOURCE_UNSET; |
21c5fd97 IA |
1868 | r->start = 0; |
1869 | r->end = 0xff; | |
1870 | } | |
1871 | } | |
1872 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, | |
1873 | quirk_plx_pci9050); | |
2794bb28 IA |
1874 | /* |
1875 | * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others) | |
1876 | * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b, | |
1877 | * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c, | |
1878 | * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b. | |
1879 | * | |
1880 | * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq" | |
1881 | * driver. | |
1882 | */ | |
1883 | DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050); | |
1884 | DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050); | |
21c5fd97 | 1885 | |
15856ad5 | 1886 | static void quirk_netmos(struct pci_dev *dev) |
1da177e4 LT |
1887 | { |
1888 | unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; | |
1889 | unsigned int num_serial = dev->subsystem_device & 0xf; | |
1890 | ||
1891 | /* | |
1892 | * These Netmos parts are multiport serial devices with optional | |
1893 | * parallel ports. Even when parallel ports are present, they | |
1894 | * are identified as class SERIAL, which means the serial driver | |
1895 | * will claim them. To prevent this, mark them as class OTHER. | |
1896 | * These combo devices should be claimed by parport_serial. | |
1897 | * | |
1898 | * The subdevice ID is of the form 0x00PS, where <P> is the number | |
1899 | * of parallel ports and <S> is the number of serial ports. | |
1900 | */ | |
1901 | switch (dev->device) { | |
4c9c1686 JS |
1902 | case PCI_DEVICE_ID_NETMOS_9835: |
1903 | /* Well, this rule doesn't hold for the following 9835 device */ | |
1904 | if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && | |
1905 | dev->subsystem_device == 0x0299) | |
1906 | return; | |
1da177e4 LT |
1907 | case PCI_DEVICE_ID_NETMOS_9735: |
1908 | case PCI_DEVICE_ID_NETMOS_9745: | |
1da177e4 LT |
1909 | case PCI_DEVICE_ID_NETMOS_9845: |
1910 | case PCI_DEVICE_ID_NETMOS_9855: | |
08803efe | 1911 | if (num_parallel) { |
227f0647 | 1912 | dev_info(&dev->dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n", |
1da177e4 LT |
1913 | dev->device, num_parallel, num_serial); |
1914 | dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | | |
1915 | (dev->class & 0xff); | |
1916 | } | |
1917 | } | |
1918 | } | |
08803efe YL |
1919 | DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, |
1920 | PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); | |
1da177e4 | 1921 | |
da2d03ea AW |
1922 | /* |
1923 | * Quirk non-zero PCI functions to route VPD access through function 0 for | |
1924 | * devices that share VPD resources between functions. The functions are | |
1925 | * expected to be identical devices. | |
1926 | */ | |
7aa6ca4d MR |
1927 | static void quirk_f0_vpd_link(struct pci_dev *dev) |
1928 | { | |
da2d03ea AW |
1929 | struct pci_dev *f0; |
1930 | ||
1931 | if (!PCI_FUNC(dev->devfn)) | |
7aa6ca4d | 1932 | return; |
da2d03ea AW |
1933 | |
1934 | f0 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); | |
1935 | if (!f0) | |
1936 | return; | |
1937 | ||
1938 | if (f0->vpd && dev->class == f0->class && | |
1939 | dev->vendor == f0->vendor && dev->device == f0->device) | |
1940 | dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0; | |
1941 | ||
1942 | pci_dev_put(f0); | |
7aa6ca4d MR |
1943 | } |
1944 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, | |
1945 | PCI_CLASS_NETWORK_ETHERNET, 8, quirk_f0_vpd_link); | |
1946 | ||
15856ad5 | 1947 | static void quirk_e100_interrupt(struct pci_dev *dev) |
16a74744 | 1948 | { |
e64aeccb | 1949 | u16 command, pmcsr; |
16a74744 BH |
1950 | u8 __iomem *csr; |
1951 | u8 cmd_hi; | |
1952 | ||
1953 | switch (dev->device) { | |
1954 | /* PCI IDs taken from drivers/net/e100.c */ | |
1955 | case 0x1029: | |
1956 | case 0x1030 ... 0x1034: | |
1957 | case 0x1038 ... 0x103E: | |
1958 | case 0x1050 ... 0x1057: | |
1959 | case 0x1059: | |
1960 | case 0x1064 ... 0x106B: | |
1961 | case 0x1091 ... 0x1095: | |
1962 | case 0x1209: | |
1963 | case 0x1229: | |
1964 | case 0x2449: | |
1965 | case 0x2459: | |
1966 | case 0x245D: | |
1967 | case 0x27DC: | |
1968 | break; | |
1969 | default: | |
1970 | return; | |
1971 | } | |
1972 | ||
1973 | /* | |
1974 | * Some firmware hands off the e100 with interrupts enabled, | |
1975 | * which can cause a flood of interrupts if packets are | |
1976 | * received before the driver attaches to the device. So | |
1977 | * disable all e100 interrupts here. The driver will | |
1978 | * re-enable them when it's ready. | |
1979 | */ | |
1980 | pci_read_config_word(dev, PCI_COMMAND, &command); | |
16a74744 | 1981 | |
1bef7dc0 | 1982 | if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) |
16a74744 BH |
1983 | return; |
1984 | ||
e64aeccb IK |
1985 | /* |
1986 | * Check that the device is in the D0 power state. If it's not, | |
1987 | * there is no point to look any further. | |
1988 | */ | |
728cdb75 YW |
1989 | if (dev->pm_cap) { |
1990 | pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); | |
e64aeccb IK |
1991 | if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) |
1992 | return; | |
1993 | } | |
1994 | ||
1bef7dc0 BH |
1995 | /* Convert from PCI bus to resource space. */ |
1996 | csr = ioremap(pci_resource_start(dev, 0), 8); | |
16a74744 | 1997 | if (!csr) { |
f0fda801 | 1998 | dev_warn(&dev->dev, "Can't map e100 registers\n"); |
16a74744 BH |
1999 | return; |
2000 | } | |
2001 | ||
2002 | cmd_hi = readb(csr + 3); | |
2003 | if (cmd_hi == 0) { | |
227f0647 | 2004 | dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; disabling\n"); |
16a74744 BH |
2005 | writeb(1, csr + 3); |
2006 | } | |
2007 | ||
2008 | iounmap(csr); | |
2009 | } | |
4c5b28e2 YL |
2010 | DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, |
2011 | PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt); | |
a5312e28 | 2012 | |
649426ef AD |
2013 | /* |
2014 | * The 82575 and 82598 may experience data corruption issues when transitioning | |
2015 | * out of L0S. To prevent this we need to disable L0S on the pci-e link | |
2016 | */ | |
15856ad5 | 2017 | static void quirk_disable_aspm_l0s(struct pci_dev *dev) |
649426ef AD |
2018 | { |
2019 | dev_info(&dev->dev, "Disabling L0s\n"); | |
2020 | pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); | |
2021 | } | |
2022 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); | |
2023 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); | |
2024 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); | |
2025 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); | |
2026 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); | |
2027 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); | |
2028 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); | |
2029 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); | |
2030 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); | |
2031 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); | |
2032 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); | |
2033 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); | |
2034 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); | |
2035 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); | |
2036 | ||
15856ad5 | 2037 | static void fixup_rev1_53c810(struct pci_dev *dev) |
a5312e28 | 2038 | { |
e6323e3c BH |
2039 | u32 class = dev->class; |
2040 | ||
2041 | /* | |
2042 | * rev 1 ncr53c810 chips don't set the class at all which means | |
a5312e28 IK |
2043 | * they don't get their resources remapped. Fix that here. |
2044 | */ | |
e6323e3c BH |
2045 | if (class) |
2046 | return; | |
a5312e28 | 2047 | |
e6323e3c BH |
2048 | dev->class = PCI_CLASS_STORAGE_SCSI << 8; |
2049 | dev_info(&dev->dev, "NCR 53c810 rev 1 PCI class overridden (%#08x -> %#08x)\n", | |
2050 | class, dev->class); | |
a5312e28 IK |
2051 | } |
2052 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); | |
2053 | ||
9d265124 | 2054 | /* Enable 1k I/O space granularity on the Intel P64H2 */ |
15856ad5 | 2055 | static void quirk_p64h2_1k_io(struct pci_dev *dev) |
9d265124 DY |
2056 | { |
2057 | u16 en1k; | |
9d265124 DY |
2058 | |
2059 | pci_read_config_word(dev, 0x40, &en1k); | |
2060 | ||
2061 | if (en1k & 0x200) { | |
f0fda801 | 2062 | dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n"); |
2b28ae19 | 2063 | dev->io_window_1k = 1; |
9d265124 DY |
2064 | } |
2065 | } | |
2066 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); | |
2067 | ||
cf34a8e0 BG |
2068 | /* Under some circumstances, AER is not linked with extended capabilities. |
2069 | * Force it to be linked by setting the corresponding control bit in the | |
2070 | * config space. | |
2071 | */ | |
1597cacb | 2072 | static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) |
cf34a8e0 BG |
2073 | { |
2074 | uint8_t b; | |
2075 | if (pci_read_config_byte(dev, 0xf41, &b) == 0) { | |
2076 | if (!(b & 0x20)) { | |
2077 | pci_write_config_byte(dev, 0xf41, b | 0x20); | |
227f0647 | 2078 | dev_info(&dev->dev, "Linking AER extended capability\n"); |
cf34a8e0 BG |
2079 | } |
2080 | } | |
2081 | } | |
2082 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, | |
2083 | quirk_nvidia_ck804_pcie_aer_ext_cap); | |
e1a2a51e | 2084 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, |
1597cacb | 2085 | quirk_nvidia_ck804_pcie_aer_ext_cap); |
cf34a8e0 | 2086 | |
15856ad5 | 2087 | static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) |
53a9bf42 TY |
2088 | { |
2089 | /* | |
2090 | * Disable PCI Bus Parking and PCI Master read caching on CX700 | |
2091 | * which causes unspecified timing errors with a VT6212L on the PCI | |
ca846392 TY |
2092 | * bus leading to USB2.0 packet loss. |
2093 | * | |
2094 | * This quirk is only enabled if a second (on the external PCI bus) | |
2095 | * VT6212L is found -- the CX700 core itself also contains a USB | |
2096 | * host controller with the same PCI ID as the VT6212L. | |
53a9bf42 TY |
2097 | */ |
2098 | ||
ca846392 TY |
2099 | /* Count VT6212L instances */ |
2100 | struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA, | |
2101 | PCI_DEVICE_ID_VIA_8235_USB_2, NULL); | |
53a9bf42 | 2102 | uint8_t b; |
ca846392 TY |
2103 | |
2104 | /* p should contain the first (internal) VT6212L -- see if we have | |
2105 | an external one by searching again */ | |
2106 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); | |
2107 | if (!p) | |
2108 | return; | |
2109 | pci_dev_put(p); | |
2110 | ||
53a9bf42 TY |
2111 | if (pci_read_config_byte(dev, 0x76, &b) == 0) { |
2112 | if (b & 0x40) { | |
2113 | /* Turn off PCI Bus Parking */ | |
2114 | pci_write_config_byte(dev, 0x76, b ^ 0x40); | |
2115 | ||
227f0647 | 2116 | dev_info(&dev->dev, "Disabling VIA CX700 PCI parking\n"); |
bc043274 TY |
2117 | } |
2118 | } | |
2119 | ||
2120 | if (pci_read_config_byte(dev, 0x72, &b) == 0) { | |
2121 | if (b != 0) { | |
53a9bf42 TY |
2122 | /* Turn off PCI Master read caching */ |
2123 | pci_write_config_byte(dev, 0x72, 0x0); | |
bc043274 TY |
2124 | |
2125 | /* Set PCI Master Bus time-out to "1x16 PCLK" */ | |
53a9bf42 | 2126 | pci_write_config_byte(dev, 0x75, 0x1); |
bc043274 TY |
2127 | |
2128 | /* Disable "Read FIFO Timer" */ | |
53a9bf42 TY |
2129 | pci_write_config_byte(dev, 0x77, 0x0); |
2130 | ||
227f0647 | 2131 | dev_info(&dev->dev, "Disabling VIA CX700 PCI caching\n"); |
53a9bf42 TY |
2132 | } |
2133 | } | |
2134 | } | |
ca846392 | 2135 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); |
53a9bf42 | 2136 | |
7c20078a BM |
2137 | /* |
2138 | * If a device follows the VPD format spec, the PCI core will not read or | |
2139 | * write past the VPD End Tag. But some vendors do not follow the VPD | |
2140 | * format spec, so we can't tell how much data is safe to access. Devices | |
2141 | * may behave unpredictably if we access too much. Blacklist these devices | |
2142 | * so we don't touch VPD at all. | |
2143 | */ | |
2144 | static void quirk_blacklist_vpd(struct pci_dev *dev) | |
2145 | { | |
2146 | if (dev->vpd) { | |
2147 | dev->vpd->len = 0; | |
2148 | dev_warn(&dev->dev, FW_BUG "VPD access disabled\n"); | |
2149 | } | |
2150 | } | |
2151 | ||
2152 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd); | |
2153 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd); | |
2154 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd); | |
2155 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd); | |
2156 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd); | |
2157 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd); | |
2158 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd); | |
2159 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd); | |
2160 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd); | |
2161 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd); | |
2162 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd); | |
2163 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID, | |
2164 | quirk_blacklist_vpd); | |
2165 | ||
99cb233d BL |
2166 | /* |
2167 | * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the | |
2168 | * VPD end tag will hang the device. This problem was initially | |
2169 | * observed when a vpd entry was created in sysfs | |
2170 | * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry | |
2171 | * will dump 32k of data. Reading a full 32k will cause an access | |
2172 | * beyond the VPD end tag causing the device to hang. Once the device | |
2173 | * is hung, the bnx2 driver will not be able to reset the device. | |
2174 | * We believe that it is legal to read beyond the end tag and | |
2175 | * therefore the solution is to limit the read/write length. | |
2176 | */ | |
15856ad5 | 2177 | static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev) |
99cb233d | 2178 | { |
9d82d8ea | 2179 | /* |
35405f25 DH |
2180 | * Only disable the VPD capability for 5706, 5706S, 5708, |
2181 | * 5708S and 5709 rev. A | |
9d82d8ea | 2182 | */ |
99cb233d | 2183 | if ((dev->device == PCI_DEVICE_ID_NX2_5706) || |
35405f25 | 2184 | (dev->device == PCI_DEVICE_ID_NX2_5706S) || |
99cb233d | 2185 | (dev->device == PCI_DEVICE_ID_NX2_5708) || |
9d82d8ea | 2186 | (dev->device == PCI_DEVICE_ID_NX2_5708S) || |
99cb233d BL |
2187 | ((dev->device == PCI_DEVICE_ID_NX2_5709) && |
2188 | (dev->revision & 0xf0) == 0x0)) { | |
2189 | if (dev->vpd) | |
2190 | dev->vpd->len = 0x80; | |
2191 | } | |
2192 | } | |
2193 | ||
bffadffd YZ |
2194 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
2195 | PCI_DEVICE_ID_NX2_5706, | |
2196 | quirk_brcm_570x_limit_vpd); | |
2197 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2198 | PCI_DEVICE_ID_NX2_5706S, | |
2199 | quirk_brcm_570x_limit_vpd); | |
2200 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2201 | PCI_DEVICE_ID_NX2_5708, | |
2202 | quirk_brcm_570x_limit_vpd); | |
2203 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2204 | PCI_DEVICE_ID_NX2_5708S, | |
2205 | quirk_brcm_570x_limit_vpd); | |
2206 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2207 | PCI_DEVICE_ID_NX2_5709, | |
2208 | quirk_brcm_570x_limit_vpd); | |
2209 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2210 | PCI_DEVICE_ID_NX2_5709S, | |
2211 | quirk_brcm_570x_limit_vpd); | |
99cb233d | 2212 | |
25e742b2 | 2213 | static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev) |
0b471506 MC |
2214 | { |
2215 | u32 rev; | |
2216 | ||
2217 | pci_read_config_dword(dev, 0xf4, &rev); | |
2218 | ||
2219 | /* Only CAP the MRRS if the device is a 5719 A0 */ | |
2220 | if (rev == 0x05719000) { | |
2221 | int readrq = pcie_get_readrq(dev); | |
2222 | if (readrq > 2048) | |
2223 | pcie_set_readrq(dev, 2048); | |
2224 | } | |
2225 | } | |
2226 | ||
2227 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, | |
2228 | PCI_DEVICE_ID_TIGON3_5719, | |
2229 | quirk_brcm_5719_limit_mrrs); | |
2230 | ||
26c56dc0 MM |
2231 | /* Originally in EDAC sources for i82875P: |
2232 | * Intel tells BIOS developers to hide device 6 which | |
2233 | * configures the overflow device access containing | |
2234 | * the DRBs - this is where we expose device 6. | |
2235 | * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm | |
2236 | */ | |
15856ad5 | 2237 | static void quirk_unhide_mch_dev6(struct pci_dev *dev) |
26c56dc0 MM |
2238 | { |
2239 | u8 reg; | |
2240 | ||
2241 | if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) { | |
2242 | dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n"); | |
2243 | pci_write_config_byte(dev, 0xF4, reg | 0x02); | |
2244 | } | |
2245 | } | |
2246 | ||
2247 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, | |
2248 | quirk_unhide_mch_dev6); | |
2249 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, | |
2250 | quirk_unhide_mch_dev6); | |
2251 | ||
12962267 | 2252 | #ifdef CONFIG_TILEPRO |
f02cbbe6 | 2253 | /* |
12962267 | 2254 | * The Tilera TILEmpower tilepro platform needs to set the link speed |
f02cbbe6 CM |
2255 | * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed |
2256 | * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe | |
2257 | * capability register of the PEX8624 PCIe switch. The switch | |
2258 | * supports link speed auto negotiation, but falsely sets | |
2259 | * the link speed to 5GT/s. | |
2260 | */ | |
15856ad5 | 2261 | static void quirk_tile_plx_gen1(struct pci_dev *dev) |
f02cbbe6 CM |
2262 | { |
2263 | if (tile_plx_gen1) { | |
2264 | pci_write_config_dword(dev, 0x98, 0x1); | |
2265 | mdelay(50); | |
2266 | } | |
2267 | } | |
2268 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); | |
12962267 | 2269 | #endif /* CONFIG_TILEPRO */ |
26c56dc0 | 2270 | |
3f79e107 | 2271 | #ifdef CONFIG_PCI_MSI |
ebdf7d39 TH |
2272 | /* Some chipsets do not support MSI. We cannot easily rely on setting |
2273 | * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually | |
f7625980 BH |
2274 | * some other buses controlled by the chipset even if Linux is not |
2275 | * aware of it. Instead of setting the flag on all buses in the | |
ebdf7d39 | 2276 | * machine, simply disable MSI globally. |
3f79e107 | 2277 | */ |
15856ad5 | 2278 | static void quirk_disable_all_msi(struct pci_dev *dev) |
3f79e107 | 2279 | { |
88187dfa | 2280 | pci_no_msi(); |
f0fda801 | 2281 | dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n"); |
3f79e107 | 2282 | } |
ebdf7d39 TH |
2283 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); |
2284 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); | |
2285 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); | |
66d715c9 | 2286 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); |
184b812f | 2287 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); |
162dedd3 | 2288 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi); |
549e1561 | 2289 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi); |
10b4ad1a | 2290 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, 0x0761, quirk_disable_all_msi); |
3f79e107 BG |
2291 | |
2292 | /* Disable MSI on chipsets that are known to not support it */ | |
15856ad5 | 2293 | static void quirk_disable_msi(struct pci_dev *dev) |
3f79e107 BG |
2294 | { |
2295 | if (dev->subordinate) { | |
227f0647 | 2296 | dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); |
3f79e107 BG |
2297 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
2298 | } | |
2299 | } | |
2300 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); | |
134b3450 | 2301 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi); |
9313ff45 | 2302 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi); |
6397c75c | 2303 | |
aff61369 CL |
2304 | /* |
2305 | * The APC bridge device in AMD 780 family northbridges has some random | |
2306 | * OEM subsystem ID in its vendor ID register (erratum 18), so instead | |
2307 | * we use the possible vendor/device IDs of the host bridge for the | |
2308 | * declared quirk, and search for the APC bridge by slot number. | |
2309 | */ | |
15856ad5 | 2310 | static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge) |
aff61369 CL |
2311 | { |
2312 | struct pci_dev *apc_bridge; | |
2313 | ||
2314 | apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0)); | |
2315 | if (apc_bridge) { | |
2316 | if (apc_bridge->device == 0x9602) | |
2317 | quirk_disable_msi(apc_bridge); | |
2318 | pci_dev_put(apc_bridge); | |
2319 | } | |
2320 | } | |
2321 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi); | |
2322 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi); | |
2323 | ||
6397c75c BG |
2324 | /* Go through the list of Hypertransport capabilities and |
2325 | * return 1 if a HT MSI capability is found and enabled */ | |
25e742b2 | 2326 | static int msi_ht_cap_enabled(struct pci_dev *dev) |
6397c75c | 2327 | { |
fff905f3 | 2328 | int pos, ttl = PCI_FIND_CAP_TTL; |
7a380507 ME |
2329 | |
2330 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
2331 | while (pos && ttl--) { | |
2332 | u8 flags; | |
2333 | ||
2334 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
3c78bc61 | 2335 | &flags) == 0) { |
f0fda801 | 2336 | dev_info(&dev->dev, "Found %s HT MSI Mapping\n", |
7a380507 | 2337 | flags & HT_MSI_FLAGS_ENABLE ? |
f0fda801 | 2338 | "enabled" : "disabled"); |
7a380507 | 2339 | return (flags & HT_MSI_FLAGS_ENABLE) != 0; |
6397c75c | 2340 | } |
7a380507 ME |
2341 | |
2342 | pos = pci_find_next_ht_capability(dev, pos, | |
2343 | HT_CAPTYPE_MSI_MAPPING); | |
6397c75c BG |
2344 | } |
2345 | return 0; | |
2346 | } | |
2347 | ||
2348 | /* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ | |
25e742b2 | 2349 | static void quirk_msi_ht_cap(struct pci_dev *dev) |
6397c75c BG |
2350 | { |
2351 | if (dev->subordinate && !msi_ht_cap_enabled(dev)) { | |
227f0647 | 2352 | dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); |
6397c75c BG |
2353 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
2354 | } | |
2355 | } | |
2356 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, | |
2357 | quirk_msi_ht_cap); | |
6bae1d96 | 2358 | |
6397c75c BG |
2359 | /* The nVidia CK804 chipset may have 2 HT MSI mappings. |
2360 | * MSI are supported if the MSI capability set in any of these mappings. | |
2361 | */ | |
25e742b2 | 2362 | static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) |
6397c75c BG |
2363 | { |
2364 | struct pci_dev *pdev; | |
2365 | ||
2366 | if (!dev->subordinate) | |
2367 | return; | |
2368 | ||
2369 | /* check HT MSI cap on this chipset and the root one. | |
2370 | * a single one having MSI is enough to be sure that MSI are supported. | |
2371 | */ | |
11f242f0 | 2372 | pdev = pci_get_slot(dev->bus, 0); |
9ac0ce85 JJ |
2373 | if (!pdev) |
2374 | return; | |
0c875c28 | 2375 | if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { |
227f0647 | 2376 | dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); |
6397c75c BG |
2377 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
2378 | } | |
11f242f0 | 2379 | pci_dev_put(pdev); |
6397c75c BG |
2380 | } |
2381 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, | |
2382 | quirk_nvidia_ck804_msi_ht_cap); | |
ba698ad4 | 2383 | |
415b6d0e | 2384 | /* Force enable MSI mapping capability on HT bridges */ |
25e742b2 | 2385 | static void ht_enable_msi_mapping(struct pci_dev *dev) |
9dc625e7 | 2386 | { |
fff905f3 | 2387 | int pos, ttl = PCI_FIND_CAP_TTL; |
9dc625e7 PC |
2388 | |
2389 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
2390 | while (pos && ttl--) { | |
2391 | u8 flags; | |
2392 | ||
2393 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
2394 | &flags) == 0) { | |
2395 | dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); | |
2396 | ||
2397 | pci_write_config_byte(dev, pos + HT_MSI_FLAGS, | |
2398 | flags | HT_MSI_FLAGS_ENABLE); | |
2399 | } | |
2400 | pos = pci_find_next_ht_capability(dev, pos, | |
2401 | HT_CAPTYPE_MSI_MAPPING); | |
2402 | } | |
2403 | } | |
415b6d0e BH |
2404 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, |
2405 | PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, | |
2406 | ht_enable_msi_mapping); | |
9dc625e7 | 2407 | |
e0ae4f55 YL |
2408 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, |
2409 | ht_enable_msi_mapping); | |
2410 | ||
e4146bb9 | 2411 | /* The P5N32-SLI motherboards from Asus have a problem with msi |
75e07fc3 AP |
2412 | * for the MCP55 NIC. It is not yet determined whether the msi problem |
2413 | * also affects other devices. As for now, turn off msi for this device. | |
2414 | */ | |
15856ad5 | 2415 | static void nvenet_msi_disable(struct pci_dev *dev) |
75e07fc3 | 2416 | { |
9251bac9 JD |
2417 | const char *board_name = dmi_get_system_info(DMI_BOARD_NAME); |
2418 | ||
2419 | if (board_name && | |
2420 | (strstr(board_name, "P5N32-SLI PREMIUM") || | |
2421 | strstr(board_name, "P5N32-E SLI"))) { | |
227f0647 | 2422 | dev_info(&dev->dev, "Disabling msi for MCP55 NIC on P5N32-SLI\n"); |
75e07fc3 AP |
2423 | dev->no_msi = 1; |
2424 | } | |
2425 | } | |
2426 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, | |
2427 | PCI_DEVICE_ID_NVIDIA_NVENET_15, | |
2428 | nvenet_msi_disable); | |
2429 | ||
66db60ea | 2430 | /* |
f7625980 BH |
2431 | * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing |
2432 | * config register. This register controls the routing of legacy | |
2433 | * interrupts from devices that route through the MCP55. If this register | |
2434 | * is misprogrammed, interrupts are only sent to the BSP, unlike | |
2435 | * conventional systems where the IRQ is broadcast to all online CPUs. Not | |
2436 | * having this register set properly prevents kdump from booting up | |
2437 | * properly, so let's make sure that we have it set correctly. | |
2438 | * Note that this is an undocumented register. | |
66db60ea | 2439 | */ |
15856ad5 | 2440 | static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) |
66db60ea NH |
2441 | { |
2442 | u32 cfg; | |
2443 | ||
49c2fa08 NH |
2444 | if (!pci_find_capability(dev, PCI_CAP_ID_HT)) |
2445 | return; | |
2446 | ||
66db60ea NH |
2447 | pci_read_config_dword(dev, 0x74, &cfg); |
2448 | ||
2449 | if (cfg & ((1 << 2) | (1 << 15))) { | |
2450 | printk(KERN_INFO "Rewriting irq routing register on MCP55\n"); | |
2451 | cfg &= ~((1 << 2) | (1 << 15)); | |
2452 | pci_write_config_dword(dev, 0x74, cfg); | |
2453 | } | |
2454 | } | |
2455 | ||
2456 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, | |
2457 | PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0, | |
2458 | nvbridge_check_legacy_irq_routing); | |
2459 | ||
2460 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, | |
2461 | PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4, | |
2462 | nvbridge_check_legacy_irq_routing); | |
2463 | ||
25e742b2 | 2464 | static int ht_check_msi_mapping(struct pci_dev *dev) |
de745306 | 2465 | { |
fff905f3 | 2466 | int pos, ttl = PCI_FIND_CAP_TTL; |
de745306 YL |
2467 | int found = 0; |
2468 | ||
2469 | /* check if there is HT MSI cap or enabled on this device */ | |
2470 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
2471 | while (pos && ttl--) { | |
2472 | u8 flags; | |
2473 | ||
2474 | if (found < 1) | |
2475 | found = 1; | |
2476 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
2477 | &flags) == 0) { | |
2478 | if (flags & HT_MSI_FLAGS_ENABLE) { | |
2479 | if (found < 2) { | |
2480 | found = 2; | |
2481 | break; | |
2482 | } | |
2483 | } | |
2484 | } | |
2485 | pos = pci_find_next_ht_capability(dev, pos, | |
2486 | HT_CAPTYPE_MSI_MAPPING); | |
2487 | } | |
2488 | ||
2489 | return found; | |
2490 | } | |
2491 | ||
25e742b2 | 2492 | static int host_bridge_with_leaf(struct pci_dev *host_bridge) |
de745306 YL |
2493 | { |
2494 | struct pci_dev *dev; | |
2495 | int pos; | |
2496 | int i, dev_no; | |
2497 | int found = 0; | |
2498 | ||
2499 | dev_no = host_bridge->devfn >> 3; | |
2500 | for (i = dev_no + 1; i < 0x20; i++) { | |
2501 | dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0)); | |
2502 | if (!dev) | |
2503 | continue; | |
2504 | ||
2505 | /* found next host bridge ?*/ | |
2506 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); | |
2507 | if (pos != 0) { | |
2508 | pci_dev_put(dev); | |
2509 | break; | |
2510 | } | |
2511 | ||
2512 | if (ht_check_msi_mapping(dev)) { | |
2513 | found = 1; | |
2514 | pci_dev_put(dev); | |
2515 | break; | |
2516 | } | |
2517 | pci_dev_put(dev); | |
2518 | } | |
2519 | ||
2520 | return found; | |
2521 | } | |
2522 | ||
eeafda70 YL |
2523 | #define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */ |
2524 | #define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */ | |
2525 | ||
25e742b2 | 2526 | static int is_end_of_ht_chain(struct pci_dev *dev) |
eeafda70 YL |
2527 | { |
2528 | int pos, ctrl_off; | |
2529 | int end = 0; | |
2530 | u16 flags, ctrl; | |
2531 | ||
2532 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); | |
2533 | ||
2534 | if (!pos) | |
2535 | goto out; | |
2536 | ||
2537 | pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags); | |
2538 | ||
2539 | ctrl_off = ((flags >> 10) & 1) ? | |
2540 | PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1; | |
2541 | pci_read_config_word(dev, pos + ctrl_off, &ctrl); | |
2542 | ||
2543 | if (ctrl & (1 << 6)) | |
2544 | end = 1; | |
2545 | ||
2546 | out: | |
2547 | return end; | |
2548 | } | |
2549 | ||
25e742b2 | 2550 | static void nv_ht_enable_msi_mapping(struct pci_dev *dev) |
9dc625e7 PC |
2551 | { |
2552 | struct pci_dev *host_bridge; | |
1dec6b05 YL |
2553 | int pos; |
2554 | int i, dev_no; | |
2555 | int found = 0; | |
2556 | ||
2557 | dev_no = dev->devfn >> 3; | |
2558 | for (i = dev_no; i >= 0; i--) { | |
2559 | host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); | |
2560 | if (!host_bridge) | |
2561 | continue; | |
2562 | ||
2563 | pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); | |
2564 | if (pos != 0) { | |
2565 | found = 1; | |
2566 | break; | |
2567 | } | |
2568 | pci_dev_put(host_bridge); | |
2569 | } | |
2570 | ||
2571 | if (!found) | |
2572 | return; | |
2573 | ||
eeafda70 YL |
2574 | /* don't enable end_device/host_bridge with leaf directly here */ |
2575 | if (host_bridge == dev && is_end_of_ht_chain(host_bridge) && | |
2576 | host_bridge_with_leaf(host_bridge)) | |
de745306 YL |
2577 | goto out; |
2578 | ||
1dec6b05 YL |
2579 | /* root did that ! */ |
2580 | if (msi_ht_cap_enabled(host_bridge)) | |
2581 | goto out; | |
2582 | ||
2583 | ht_enable_msi_mapping(dev); | |
2584 | ||
2585 | out: | |
2586 | pci_dev_put(host_bridge); | |
2587 | } | |
2588 | ||
25e742b2 | 2589 | static void ht_disable_msi_mapping(struct pci_dev *dev) |
1dec6b05 | 2590 | { |
fff905f3 | 2591 | int pos, ttl = PCI_FIND_CAP_TTL; |
1dec6b05 YL |
2592 | |
2593 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
2594 | while (pos && ttl--) { | |
2595 | u8 flags; | |
2596 | ||
2597 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
2598 | &flags) == 0) { | |
6a958d5b | 2599 | dev_info(&dev->dev, "Disabling HT MSI Mapping\n"); |
1dec6b05 YL |
2600 | |
2601 | pci_write_config_byte(dev, pos + HT_MSI_FLAGS, | |
2602 | flags & ~HT_MSI_FLAGS_ENABLE); | |
2603 | } | |
2604 | pos = pci_find_next_ht_capability(dev, pos, | |
2605 | HT_CAPTYPE_MSI_MAPPING); | |
2606 | } | |
2607 | } | |
2608 | ||
25e742b2 | 2609 | static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all) |
1dec6b05 YL |
2610 | { |
2611 | struct pci_dev *host_bridge; | |
2612 | int pos; | |
2613 | int found; | |
2614 | ||
3d2a5318 RW |
2615 | if (!pci_msi_enabled()) |
2616 | return; | |
2617 | ||
1dec6b05 YL |
2618 | /* check if there is HT MSI cap or enabled on this device */ |
2619 | found = ht_check_msi_mapping(dev); | |
2620 | ||
2621 | /* no HT MSI CAP */ | |
2622 | if (found == 0) | |
2623 | return; | |
9dc625e7 PC |
2624 | |
2625 | /* | |
2626 | * HT MSI mapping should be disabled on devices that are below | |
2627 | * a non-Hypertransport host bridge. Locate the host bridge... | |
2628 | */ | |
2629 | host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); | |
2630 | if (host_bridge == NULL) { | |
227f0647 | 2631 | dev_warn(&dev->dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n"); |
9dc625e7 PC |
2632 | return; |
2633 | } | |
2634 | ||
2635 | pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); | |
2636 | if (pos != 0) { | |
2637 | /* Host bridge is to HT */ | |
1dec6b05 YL |
2638 | if (found == 1) { |
2639 | /* it is not enabled, try to enable it */ | |
de745306 YL |
2640 | if (all) |
2641 | ht_enable_msi_mapping(dev); | |
2642 | else | |
2643 | nv_ht_enable_msi_mapping(dev); | |
1dec6b05 | 2644 | } |
dff3aef7 | 2645 | goto out; |
9dc625e7 PC |
2646 | } |
2647 | ||
1dec6b05 YL |
2648 | /* HT MSI is not enabled */ |
2649 | if (found == 1) | |
dff3aef7 | 2650 | goto out; |
9dc625e7 | 2651 | |
1dec6b05 YL |
2652 | /* Host bridge is not to HT, disable HT MSI mapping on this device */ |
2653 | ht_disable_msi_mapping(dev); | |
dff3aef7 MS |
2654 | |
2655 | out: | |
2656 | pci_dev_put(host_bridge); | |
9dc625e7 | 2657 | } |
de745306 | 2658 | |
25e742b2 | 2659 | static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev) |
de745306 YL |
2660 | { |
2661 | return __nv_msi_ht_cap_quirk(dev, 1); | |
2662 | } | |
2663 | ||
25e742b2 | 2664 | static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) |
de745306 YL |
2665 | { |
2666 | return __nv_msi_ht_cap_quirk(dev, 0); | |
2667 | } | |
2668 | ||
2669 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); | |
6dab62ee | 2670 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); |
de745306 YL |
2671 | |
2672 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); | |
6dab62ee | 2673 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); |
9dc625e7 | 2674 | |
15856ad5 | 2675 | static void quirk_msi_intx_disable_bug(struct pci_dev *dev) |
ba698ad4 DM |
2676 | { |
2677 | dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; | |
2678 | } | |
15856ad5 | 2679 | static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) |
4600c9d7 SH |
2680 | { |
2681 | struct pci_dev *p; | |
2682 | ||
2683 | /* SB700 MSI issue will be fixed at HW level from revision A21, | |
2684 | * we need check PCI REVISION ID of SMBus controller to get SB700 | |
2685 | * revision. | |
2686 | */ | |
2687 | p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, | |
2688 | NULL); | |
2689 | if (!p) | |
2690 | return; | |
2691 | ||
2692 | if ((p->revision < 0x3B) && (p->revision >= 0x30)) | |
2693 | dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; | |
2694 | pci_dev_put(p); | |
2695 | } | |
70588818 XH |
2696 | static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev) |
2697 | { | |
2698 | /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */ | |
2699 | if (dev->revision < 0x18) { | |
2700 | dev_info(&dev->dev, "set MSI_INTX_DISABLE_BUG flag\n"); | |
2701 | dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; | |
2702 | } | |
2703 | } | |
ba698ad4 DM |
2704 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
2705 | PCI_DEVICE_ID_TIGON3_5780, | |
2706 | quirk_msi_intx_disable_bug); | |
2707 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2708 | PCI_DEVICE_ID_TIGON3_5780S, | |
2709 | quirk_msi_intx_disable_bug); | |
2710 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2711 | PCI_DEVICE_ID_TIGON3_5714, | |
2712 | quirk_msi_intx_disable_bug); | |
2713 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2714 | PCI_DEVICE_ID_TIGON3_5714S, | |
2715 | quirk_msi_intx_disable_bug); | |
2716 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2717 | PCI_DEVICE_ID_TIGON3_5715, | |
2718 | quirk_msi_intx_disable_bug); | |
2719 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2720 | PCI_DEVICE_ID_TIGON3_5715S, | |
2721 | quirk_msi_intx_disable_bug); | |
2722 | ||
bc38b411 | 2723 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390, |
4600c9d7 | 2724 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2725 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391, |
4600c9d7 | 2726 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2727 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392, |
4600c9d7 | 2728 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2729 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393, |
4600c9d7 | 2730 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2731 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394, |
4600c9d7 | 2732 | quirk_msi_intx_disable_ati_bug); |
bc38b411 DM |
2733 | |
2734 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373, | |
2735 | quirk_msi_intx_disable_bug); | |
2736 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, | |
2737 | quirk_msi_intx_disable_bug); | |
2738 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, | |
2739 | quirk_msi_intx_disable_bug); | |
2740 | ||
7cb6a291 HX |
2741 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062, |
2742 | quirk_msi_intx_disable_bug); | |
2743 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063, | |
2744 | quirk_msi_intx_disable_bug); | |
2745 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060, | |
2746 | quirk_msi_intx_disable_bug); | |
2747 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062, | |
2748 | quirk_msi_intx_disable_bug); | |
2749 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073, | |
2750 | quirk_msi_intx_disable_bug); | |
2751 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083, | |
2752 | quirk_msi_intx_disable_bug); | |
70588818 XH |
2753 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1090, |
2754 | quirk_msi_intx_disable_qca_bug); | |
2755 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1091, | |
2756 | quirk_msi_intx_disable_qca_bug); | |
2757 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a0, | |
2758 | quirk_msi_intx_disable_qca_bug); | |
2759 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, | |
2760 | quirk_msi_intx_disable_qca_bug); | |
2761 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, | |
2762 | quirk_msi_intx_disable_qca_bug); | |
3f79e107 | 2763 | #endif /* CONFIG_PCI_MSI */ |
3d137310 | 2764 | |
3322340a FR |
2765 | /* Allow manual resource allocation for PCI hotplug bridges |
2766 | * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For | |
2767 | * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6), | |
f7625980 | 2768 | * kernel fails to allocate resources when hotplug device is |
3322340a FR |
2769 | * inserted and PCI bus is rescanned. |
2770 | */ | |
15856ad5 | 2771 | static void quirk_hotplug_bridge(struct pci_dev *dev) |
3322340a FR |
2772 | { |
2773 | dev->is_hotplug_bridge = 1; | |
2774 | } | |
2775 | ||
2776 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge); | |
2777 | ||
03cd8f7e ML |
2778 | /* |
2779 | * This is a quirk for the Ricoh MMC controller found as a part of | |
2780 | * some mulifunction chips. | |
2781 | ||
25985edc | 2782 | * This is very similar and based on the ricoh_mmc driver written by |
03cd8f7e ML |
2783 | * Philip Langdale. Thank you for these magic sequences. |
2784 | * | |
2785 | * These chips implement the four main memory card controllers (SD, MMC, MS, xD) | |
2786 | * and one or both of cardbus or firewire. | |
2787 | * | |
2788 | * It happens that they implement SD and MMC | |
2789 | * support as separate controllers (and PCI functions). The linux SDHCI | |
2790 | * driver supports MMC cards but the chip detects MMC cards in hardware | |
2791 | * and directs them to the MMC controller - so the SDHCI driver never sees | |
2792 | * them. | |
2793 | * | |
2794 | * To get around this, we must disable the useless MMC controller. | |
2795 | * At that point, the SDHCI controller will start seeing them | |
2796 | * It seems to be the case that the relevant PCI registers to deactivate the | |
2797 | * MMC controller live on PCI function 0, which might be the cardbus controller | |
2798 | * or the firewire controller, depending on the particular chip in question | |
2799 | * | |
2800 | * This has to be done early, because as soon as we disable the MMC controller | |
2801 | * other pci functions shift up one level, e.g. function #2 becomes function | |
2802 | * #1, and this will confuse the pci core. | |
2803 | */ | |
2804 | ||
2805 | #ifdef CONFIG_MMC_RICOH_MMC | |
2806 | static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) | |
2807 | { | |
2808 | /* disable via cardbus interface */ | |
2809 | u8 write_enable; | |
2810 | u8 write_target; | |
2811 | u8 disable; | |
2812 | ||
2813 | /* disable must be done via function #0 */ | |
2814 | if (PCI_FUNC(dev->devfn)) | |
2815 | return; | |
2816 | ||
2817 | pci_read_config_byte(dev, 0xB7, &disable); | |
2818 | if (disable & 0x02) | |
2819 | return; | |
2820 | ||
2821 | pci_read_config_byte(dev, 0x8E, &write_enable); | |
2822 | pci_write_config_byte(dev, 0x8E, 0xAA); | |
2823 | pci_read_config_byte(dev, 0x8D, &write_target); | |
2824 | pci_write_config_byte(dev, 0x8D, 0xB7); | |
2825 | pci_write_config_byte(dev, 0xB7, disable | 0x02); | |
2826 | pci_write_config_byte(dev, 0x8E, write_enable); | |
2827 | pci_write_config_byte(dev, 0x8D, write_target); | |
2828 | ||
2829 | dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); | |
2830 | dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); | |
2831 | } | |
2832 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); | |
2833 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); | |
2834 | ||
2835 | static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) | |
2836 | { | |
2837 | /* disable via firewire interface */ | |
2838 | u8 write_enable; | |
2839 | u8 disable; | |
2840 | ||
2841 | /* disable must be done via function #0 */ | |
2842 | if (PCI_FUNC(dev->devfn)) | |
2843 | return; | |
15bed0f2 | 2844 | /* |
812089e0 | 2845 | * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize |
15bed0f2 MI |
2846 | * certain types of SD/MMC cards. Lowering the SD base |
2847 | * clock frequency from 200Mhz to 50Mhz fixes this issue. | |
2848 | * | |
2849 | * 0x150 - SD2.0 mode enable for changing base clock | |
2850 | * frequency to 50Mhz | |
2851 | * 0xe1 - Base clock frequency | |
2852 | * 0x32 - 50Mhz new clock frequency | |
2853 | * 0xf9 - Key register for 0x150 | |
2854 | * 0xfc - key register for 0xe1 | |
2855 | */ | |
812089e0 AL |
2856 | if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 || |
2857 | dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { | |
15bed0f2 MI |
2858 | pci_write_config_byte(dev, 0xf9, 0xfc); |
2859 | pci_write_config_byte(dev, 0x150, 0x10); | |
2860 | pci_write_config_byte(dev, 0xf9, 0x00); | |
2861 | pci_write_config_byte(dev, 0xfc, 0x01); | |
2862 | pci_write_config_byte(dev, 0xe1, 0x32); | |
2863 | pci_write_config_byte(dev, 0xfc, 0x00); | |
2864 | ||
2865 | dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n"); | |
2866 | } | |
3e309cdf JB |
2867 | |
2868 | pci_read_config_byte(dev, 0xCB, &disable); | |
2869 | ||
2870 | if (disable & 0x02) | |
2871 | return; | |
2872 | ||
2873 | pci_read_config_byte(dev, 0xCA, &write_enable); | |
2874 | pci_write_config_byte(dev, 0xCA, 0x57); | |
2875 | pci_write_config_byte(dev, 0xCB, disable | 0x02); | |
2876 | pci_write_config_byte(dev, 0xCA, write_enable); | |
2877 | ||
2878 | dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); | |
2879 | dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); | |
2880 | ||
03cd8f7e ML |
2881 | } |
2882 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); | |
2883 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); | |
812089e0 AL |
2884 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); |
2885 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); | |
be98ca65 MI |
2886 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); |
2887 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); | |
03cd8f7e ML |
2888 | #endif /*CONFIG_MMC_RICOH_MMC*/ |
2889 | ||
d3f13810 | 2890 | #ifdef CONFIG_DMAR_TABLE |
254e4200 SS |
2891 | #define VTUNCERRMSK_REG 0x1ac |
2892 | #define VTD_MSK_SPEC_ERRORS (1 << 31) | |
2893 | /* | |
2894 | * This is a quirk for masking vt-d spec defined errors to platform error | |
2895 | * handling logic. With out this, platforms using Intel 7500, 5500 chipsets | |
2896 | * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based | |
2897 | * on the RAS config settings of the platform) when a vt-d fault happens. | |
2898 | * The resulting SMI caused the system to hang. | |
2899 | * | |
2900 | * VT-d spec related errors are already handled by the VT-d OS code, so no | |
2901 | * need to report the same error through other channels. | |
2902 | */ | |
2903 | static void vtd_mask_spec_errors(struct pci_dev *dev) | |
2904 | { | |
2905 | u32 word; | |
2906 | ||
2907 | pci_read_config_dword(dev, VTUNCERRMSK_REG, &word); | |
2908 | pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS); | |
2909 | } | |
2910 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); | |
2911 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); | |
2912 | #endif | |
03cd8f7e | 2913 | |
15856ad5 | 2914 | static void fixup_ti816x_class(struct pci_dev *dev) |
63c44080 | 2915 | { |
d1541dc9 BH |
2916 | u32 class = dev->class; |
2917 | ||
63c44080 | 2918 | /* TI 816x devices do not have class code set when in PCIe boot mode */ |
d1541dc9 BH |
2919 | dev->class = PCI_CLASS_MULTIMEDIA_VIDEO << 8; |
2920 | dev_info(&dev->dev, "PCI class overridden (%#08x -> %#08x)\n", | |
2921 | class, dev->class); | |
63c44080 | 2922 | } |
40c96236 | 2923 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800, |
2b4aed1d | 2924 | PCI_CLASS_NOT_DEFINED, 8, fixup_ti816x_class); |
63c44080 | 2925 | |
a94d072b BH |
2926 | /* Some PCIe devices do not work reliably with the claimed maximum |
2927 | * payload size supported. | |
2928 | */ | |
15856ad5 | 2929 | static void fixup_mpss_256(struct pci_dev *dev) |
a94d072b BH |
2930 | { |
2931 | dev->pcie_mpss = 1; /* 256 bytes */ | |
2932 | } | |
2933 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, | |
2934 | PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256); | |
2935 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, | |
2936 | PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256); | |
2937 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, | |
2938 | PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); | |
2939 | ||
d387a8d6 JM |
2940 | /* Intel 5000 and 5100 Memory controllers have an errata with read completion |
2941 | * coalescing (which is enabled by default on some BIOSes) and MPS of 256B. | |
2942 | * Since there is no way of knowing what the PCIE MPS on each fabric will be | |
2943 | * until all of the devices are discovered and buses walked, read completion | |
2944 | * coalescing must be disabled. Unfortunately, it cannot be re-enabled because | |
2945 | * it is possible to hotplug a device with MPS of 256B. | |
2946 | */ | |
15856ad5 | 2947 | static void quirk_intel_mc_errata(struct pci_dev *dev) |
d387a8d6 JM |
2948 | { |
2949 | int err; | |
2950 | u16 rcc; | |
2951 | ||
27d868b5 KB |
2952 | if (pcie_bus_config == PCIE_BUS_TUNE_OFF || |
2953 | pcie_bus_config == PCIE_BUS_DEFAULT) | |
d387a8d6 JM |
2954 | return; |
2955 | ||
2956 | /* Intel errata specifies bits to change but does not say what they are. | |
2957 | * Keeping them magical until such time as the registers and values can | |
2958 | * be explained. | |
2959 | */ | |
2960 | err = pci_read_config_word(dev, 0x48, &rcc); | |
2961 | if (err) { | |
227f0647 | 2962 | dev_err(&dev->dev, "Error attempting to read the read completion coalescing register\n"); |
d387a8d6 JM |
2963 | return; |
2964 | } | |
2965 | ||
2966 | if (!(rcc & (1 << 10))) | |
2967 | return; | |
2968 | ||
2969 | rcc &= ~(1 << 10); | |
2970 | ||
2971 | err = pci_write_config_word(dev, 0x48, rcc); | |
2972 | if (err) { | |
227f0647 | 2973 | dev_err(&dev->dev, "Error attempting to write the read completion coalescing register\n"); |
d387a8d6 JM |
2974 | return; |
2975 | } | |
2976 | ||
227f0647 | 2977 | pr_info_once("Read completion coalescing disabled due to hardware errata relating to 256B MPS\n"); |
d387a8d6 JM |
2978 | } |
2979 | /* Intel 5000 series memory controllers and ports 2-7 */ | |
2980 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata); | |
2981 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata); | |
2982 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata); | |
2983 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata); | |
2984 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata); | |
2985 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata); | |
2986 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata); | |
2987 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata); | |
2988 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata); | |
2989 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata); | |
2990 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata); | |
2991 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata); | |
2992 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata); | |
2993 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata); | |
2994 | /* Intel 5100 series memory controllers and ports 2-7 */ | |
2995 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata); | |
2996 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata); | |
2997 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata); | |
2998 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata); | |
2999 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata); | |
3000 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata); | |
3001 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata); | |
3002 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata); | |
3003 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata); | |
3004 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); | |
3005 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); | |
3006 | ||
3209874a | 3007 | |
12b03188 JM |
3008 | /* |
3009 | * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To | |
3010 | * work around this, query the size it should be configured to by the device and | |
3011 | * modify the resource end to correspond to this new size. | |
3012 | */ | |
3013 | static void quirk_intel_ntb(struct pci_dev *dev) | |
3014 | { | |
3015 | int rc; | |
3016 | u8 val; | |
3017 | ||
3018 | rc = pci_read_config_byte(dev, 0x00D0, &val); | |
3019 | if (rc) | |
3020 | return; | |
3021 | ||
3022 | dev->resource[2].end = dev->resource[2].start + ((u64) 1 << val) - 1; | |
3023 | ||
3024 | rc = pci_read_config_byte(dev, 0x00D1, &val); | |
3025 | if (rc) | |
3026 | return; | |
3027 | ||
3028 | dev->resource[4].end = dev->resource[4].start + ((u64) 1 << val) - 1; | |
3029 | } | |
3030 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb); | |
3031 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); | |
3032 | ||
2729d5b1 MS |
3033 | static ktime_t fixup_debug_start(struct pci_dev *dev, |
3034 | void (*fn)(struct pci_dev *dev)) | |
3209874a | 3035 | { |
2729d5b1 MS |
3036 | ktime_t calltime = ktime_set(0, 0); |
3037 | ||
3038 | dev_dbg(&dev->dev, "calling %pF\n", fn); | |
3039 | if (initcall_debug) { | |
3040 | pr_debug("calling %pF @ %i for %s\n", | |
3041 | fn, task_pid_nr(current), dev_name(&dev->dev)); | |
3042 | calltime = ktime_get(); | |
3043 | } | |
3044 | ||
3045 | return calltime; | |
3046 | } | |
3047 | ||
3048 | static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, | |
3049 | void (*fn)(struct pci_dev *dev)) | |
3209874a | 3050 | { |
2729d5b1 | 3051 | ktime_t delta, rettime; |
3209874a AV |
3052 | unsigned long long duration; |
3053 | ||
2729d5b1 MS |
3054 | if (initcall_debug) { |
3055 | rettime = ktime_get(); | |
3056 | delta = ktime_sub(rettime, calltime); | |
3057 | duration = (unsigned long long) ktime_to_ns(delta) >> 10; | |
3058 | pr_debug("pci fixup %pF returned after %lld usecs for %s\n", | |
3059 | fn, duration, dev_name(&dev->dev)); | |
3060 | } | |
3209874a AV |
3061 | } |
3062 | ||
f67fd55f TJ |
3063 | /* |
3064 | * Some BIOS implementations leave the Intel GPU interrupts enabled, | |
3065 | * even though no one is handling them (f.e. i915 driver is never loaded). | |
3066 | * Additionally the interrupt destination is not set up properly | |
3067 | * and the interrupt ends up -somewhere-. | |
3068 | * | |
3069 | * These spurious interrupts are "sticky" and the kernel disables | |
3070 | * the (shared) interrupt line after 100.000+ generated interrupts. | |
3071 | * | |
3072 | * Fix it by disabling the still enabled interrupts. | |
3073 | * This resolves crashes often seen on monitor unplug. | |
3074 | */ | |
3075 | #define I915_DEIER_REG 0x4400c | |
15856ad5 | 3076 | static void disable_igfx_irq(struct pci_dev *dev) |
f67fd55f TJ |
3077 | { |
3078 | void __iomem *regs = pci_iomap(dev, 0, 0); | |
3079 | if (regs == NULL) { | |
3080 | dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n"); | |
3081 | return; | |
3082 | } | |
3083 | ||
3084 | /* Check if any interrupt line is still enabled */ | |
3085 | if (readl(regs + I915_DEIER_REG) != 0) { | |
227f0647 | 3086 | dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; disabling\n"); |
f67fd55f TJ |
3087 | |
3088 | writel(0, regs + I915_DEIER_REG); | |
3089 | } | |
3090 | ||
3091 | pci_iounmap(dev, regs); | |
3092 | } | |
3093 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); | |
3094 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); | |
7c82126a | 3095 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); |
f67fd55f | 3096 | |
b8cac70a TB |
3097 | /* |
3098 | * PCI devices which are on Intel chips can skip the 10ms delay | |
3099 | * before entering D3 mode. | |
3100 | */ | |
3101 | static void quirk_remove_d3_delay(struct pci_dev *dev) | |
3102 | { | |
3103 | dev->d3_delay = 0; | |
3104 | } | |
3105 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay); | |
3106 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay); | |
3107 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay); | |
3108 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay); | |
3109 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay); | |
3110 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay); | |
3111 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay); | |
3112 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay); | |
3113 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay); | |
3114 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay); | |
3115 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay); | |
3116 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay); | |
3117 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay); | |
3118 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay); | |
4a118753 SK |
3119 | /* Intel Cherrytrail devices do not need 10ms d3_delay */ |
3120 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3_delay); | |
3121 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3_delay); | |
3122 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3_delay); | |
3123 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3_delay); | |
3124 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3_delay); | |
3125 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3_delay); | |
3126 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3_delay); | |
3127 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3_delay); | |
3128 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3_delay); | |
fbebb9fd BH |
3129 | /* |
3130 | * Some devices may pass our check in pci_intx_mask_supported if | |
3131 | * PCI_COMMAND_INTX_DISABLE works though they actually do not properly | |
3132 | * support this feature. | |
3133 | */ | |
15856ad5 | 3134 | static void quirk_broken_intx_masking(struct pci_dev *dev) |
fbebb9fd BH |
3135 | { |
3136 | dev->broken_intx_masking = 1; | |
3137 | } | |
de509f9f JK |
3138 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, 0x0030, |
3139 | quirk_broken_intx_masking); | |
0bdb3b21 AW |
3140 | DECLARE_PCI_FIXUP_HEADER(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */ |
3141 | quirk_broken_intx_masking); | |
3cb30b73 AW |
3142 | /* |
3143 | * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10) | |
3144 | * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC | |
3145 | * | |
3146 | * RTL8110SC - Fails under PCI device assignment using DisINTx masking. | |
3147 | */ | |
3148 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_REALTEK, 0x8169, | |
3149 | quirk_broken_intx_masking); | |
11e42532 GS |
3150 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID, |
3151 | quirk_broken_intx_masking); | |
fbebb9fd | 3152 | |
c3e59ee4 AW |
3153 | static void quirk_no_bus_reset(struct pci_dev *dev) |
3154 | { | |
3155 | dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET; | |
3156 | } | |
3157 | ||
3158 | /* | |
3159 | * Atheros AR93xx chips do not behave after a bus reset. The device will | |
3160 | * throw a Link Down error on AER-capable systems and regardless of AER, | |
3161 | * config space of the device is never accessible again and typically | |
3162 | * causes the system to hang or reset when access is attempted. | |
3163 | * http://www.spinics.net/lists/linux-pci/msg34797.html | |
3164 | */ | |
3165 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset); | |
3166 | ||
d84f3174 AW |
3167 | static void quirk_no_pm_reset(struct pci_dev *dev) |
3168 | { | |
3169 | /* | |
3170 | * We can't do a bus reset on root bus devices, but an ineffective | |
3171 | * PM reset may be better than nothing. | |
3172 | */ | |
3173 | if (!pci_is_root_bus(dev->bus)) | |
3174 | dev->dev_flags |= PCI_DEV_FLAGS_NO_PM_RESET; | |
3175 | } | |
3176 | ||
3177 | /* | |
3178 | * Some AMD/ATI GPUS (HD8570 - Oland) report that a D3hot->D0 transition | |
3179 | * causes a reset (i.e., they advertise NoSoftRst-). This transition seems | |
3180 | * to have no effect on the device: it retains the framebuffer contents and | |
3181 | * monitor sync. Advertising this support makes other layers, like VFIO, | |
3182 | * assume pci_reset_function() is viable for this device. Mark it as | |
3183 | * unavailable to skip it when testing reset methods. | |
3184 | */ | |
3185 | DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID, | |
3186 | PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset); | |
3187 | ||
1df5172c AN |
3188 | #ifdef CONFIG_ACPI |
3189 | /* | |
3190 | * Apple: Shutdown Cactus Ridge Thunderbolt controller. | |
3191 | * | |
3192 | * On Apple hardware the Cactus Ridge Thunderbolt controller needs to be | |
3193 | * shutdown before suspend. Otherwise the native host interface (NHI) will not | |
3194 | * be present after resume if a device was plugged in before suspend. | |
3195 | * | |
3196 | * The thunderbolt controller consists of a pcie switch with downstream | |
3197 | * bridges leading to the NHI and to the tunnel pci bridges. | |
3198 | * | |
3199 | * This quirk cuts power to the whole chip. Therefore we have to apply it | |
3200 | * during suspend_noirq of the upstream bridge. | |
3201 | * | |
3202 | * Power is automagically restored before resume. No action is needed. | |
3203 | */ | |
3204 | static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev) | |
3205 | { | |
3206 | acpi_handle bridge, SXIO, SXFP, SXLV; | |
3207 | ||
3208 | if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc.")) | |
3209 | return; | |
3210 | if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) | |
3211 | return; | |
3212 | bridge = ACPI_HANDLE(&dev->dev); | |
3213 | if (!bridge) | |
3214 | return; | |
3215 | /* | |
3216 | * SXIO and SXLV are present only on machines requiring this quirk. | |
3217 | * TB bridges in external devices might have the same device id as those | |
3218 | * on the host, but they will not have the associated ACPI methods. This | |
3219 | * implicitly checks that we are at the right bridge. | |
3220 | */ | |
3221 | if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO)) | |
3222 | || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP)) | |
3223 | || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV))) | |
3224 | return; | |
3225 | dev_info(&dev->dev, "quirk: cutting power to thunderbolt controller...\n"); | |
3226 | ||
3227 | /* magic sequence */ | |
3228 | acpi_execute_simple_method(SXIO, NULL, 1); | |
3229 | acpi_execute_simple_method(SXFP, NULL, 0); | |
3230 | msleep(300); | |
3231 | acpi_execute_simple_method(SXLV, NULL, 0); | |
3232 | acpi_execute_simple_method(SXIO, NULL, 0); | |
3233 | acpi_execute_simple_method(SXLV, NULL, 0); | |
3234 | } | |
3235 | DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL, 0x1547, | |
3236 | quirk_apple_poweroff_thunderbolt); | |
3237 | ||
3238 | /* | |
3239 | * Apple: Wait for the thunderbolt controller to reestablish pci tunnels. | |
3240 | * | |
3241 | * During suspend the thunderbolt controller is reset and all pci | |
3242 | * tunnels are lost. The NHI driver will try to reestablish all tunnels | |
3243 | * during resume. We have to manually wait for the NHI since there is | |
3244 | * no parent child relationship between the NHI and the tunneled | |
3245 | * bridges. | |
3246 | */ | |
3247 | static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) | |
3248 | { | |
3249 | struct pci_dev *sibling = NULL; | |
3250 | struct pci_dev *nhi = NULL; | |
3251 | ||
3252 | if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc.")) | |
3253 | return; | |
3254 | if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM) | |
3255 | return; | |
3256 | /* | |
3257 | * Find the NHI and confirm that we are a bridge on the tb host | |
3258 | * controller and not on a tb endpoint. | |
3259 | */ | |
3260 | sibling = pci_get_slot(dev->bus, 0x0); | |
3261 | if (sibling == dev) | |
3262 | goto out; /* we are the downstream bridge to the NHI */ | |
3263 | if (!sibling || !sibling->subordinate) | |
3264 | goto out; | |
3265 | nhi = pci_get_slot(sibling->subordinate, 0x0); | |
3266 | if (!nhi) | |
3267 | goto out; | |
3268 | if (nhi->vendor != PCI_VENDOR_ID_INTEL | |
3269 | || (nhi->device != 0x1547 && nhi->device != 0x156c) | |
3270 | || nhi->subsystem_vendor != 0x2222 | |
3271 | || nhi->subsystem_device != 0x1111) | |
3272 | goto out; | |
c89ac443 | 3273 | dev_info(&dev->dev, "quirk: waiting for thunderbolt to reestablish PCI tunnels...\n"); |
1df5172c AN |
3274 | device_pm_wait_for_dev(&dev->dev, &nhi->dev); |
3275 | out: | |
3276 | pci_dev_put(nhi); | |
3277 | pci_dev_put(sibling); | |
3278 | } | |
3279 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 0x1547, | |
3280 | quirk_apple_wait_for_thunderbolt); | |
3281 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 0x156d, | |
3282 | quirk_apple_wait_for_thunderbolt); | |
3283 | #endif | |
3284 | ||
bfb0f330 JB |
3285 | static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, |
3286 | struct pci_fixup *end) | |
3d137310 | 3287 | { |
2729d5b1 MS |
3288 | ktime_t calltime; |
3289 | ||
f4ca5c6a YL |
3290 | for (; f < end; f++) |
3291 | if ((f->class == (u32) (dev->class >> f->class_shift) || | |
3292 | f->class == (u32) PCI_ANY_ID) && | |
3293 | (f->vendor == dev->vendor || | |
3294 | f->vendor == (u16) PCI_ANY_ID) && | |
3295 | (f->device == dev->device || | |
3296 | f->device == (u16) PCI_ANY_ID)) { | |
2729d5b1 MS |
3297 | calltime = fixup_debug_start(dev, f->hook); |
3298 | f->hook(dev); | |
3299 | fixup_debug_report(dev, calltime, f->hook); | |
3d137310 | 3300 | } |
3d137310 TP |
3301 | } |
3302 | ||
3303 | extern struct pci_fixup __start_pci_fixups_early[]; | |
3304 | extern struct pci_fixup __end_pci_fixups_early[]; | |
3305 | extern struct pci_fixup __start_pci_fixups_header[]; | |
3306 | extern struct pci_fixup __end_pci_fixups_header[]; | |
3307 | extern struct pci_fixup __start_pci_fixups_final[]; | |
3308 | extern struct pci_fixup __end_pci_fixups_final[]; | |
3309 | extern struct pci_fixup __start_pci_fixups_enable[]; | |
3310 | extern struct pci_fixup __end_pci_fixups_enable[]; | |
3311 | extern struct pci_fixup __start_pci_fixups_resume[]; | |
3312 | extern struct pci_fixup __end_pci_fixups_resume[]; | |
3313 | extern struct pci_fixup __start_pci_fixups_resume_early[]; | |
3314 | extern struct pci_fixup __end_pci_fixups_resume_early[]; | |
3315 | extern struct pci_fixup __start_pci_fixups_suspend[]; | |
3316 | extern struct pci_fixup __end_pci_fixups_suspend[]; | |
7d2a01b8 AN |
3317 | extern struct pci_fixup __start_pci_fixups_suspend_late[]; |
3318 | extern struct pci_fixup __end_pci_fixups_suspend_late[]; | |
3d137310 | 3319 | |
95df8b87 | 3320 | static bool pci_apply_fixup_final_quirks; |
3d137310 TP |
3321 | |
3322 | void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) | |
3323 | { | |
3324 | struct pci_fixup *start, *end; | |
3325 | ||
3c78bc61 | 3326 | switch (pass) { |
3d137310 TP |
3327 | case pci_fixup_early: |
3328 | start = __start_pci_fixups_early; | |
3329 | end = __end_pci_fixups_early; | |
3330 | break; | |
3331 | ||
3332 | case pci_fixup_header: | |
3333 | start = __start_pci_fixups_header; | |
3334 | end = __end_pci_fixups_header; | |
3335 | break; | |
3336 | ||
3337 | case pci_fixup_final: | |
95df8b87 MS |
3338 | if (!pci_apply_fixup_final_quirks) |
3339 | return; | |
3d137310 TP |
3340 | start = __start_pci_fixups_final; |
3341 | end = __end_pci_fixups_final; | |
3342 | break; | |
3343 | ||
3344 | case pci_fixup_enable: | |
3345 | start = __start_pci_fixups_enable; | |
3346 | end = __end_pci_fixups_enable; | |
3347 | break; | |
3348 | ||
3349 | case pci_fixup_resume: | |
3350 | start = __start_pci_fixups_resume; | |
3351 | end = __end_pci_fixups_resume; | |
3352 | break; | |
3353 | ||
3354 | case pci_fixup_resume_early: | |
3355 | start = __start_pci_fixups_resume_early; | |
3356 | end = __end_pci_fixups_resume_early; | |
3357 | break; | |
3358 | ||
3359 | case pci_fixup_suspend: | |
3360 | start = __start_pci_fixups_suspend; | |
3361 | end = __end_pci_fixups_suspend; | |
3362 | break; | |
3363 | ||
7d2a01b8 AN |
3364 | case pci_fixup_suspend_late: |
3365 | start = __start_pci_fixups_suspend_late; | |
3366 | end = __end_pci_fixups_suspend_late; | |
3367 | break; | |
3368 | ||
3d137310 TP |
3369 | default: |
3370 | /* stupid compiler warning, you would think with an enum... */ | |
3371 | return; | |
3372 | } | |
3373 | pci_do_fixups(dev, start, end); | |
3374 | } | |
93177a74 | 3375 | EXPORT_SYMBOL(pci_fixup_device); |
8d86fb2c | 3376 | |
735bff10 | 3377 | |
00010268 | 3378 | static int __init pci_apply_final_quirks(void) |
8d86fb2c DW |
3379 | { |
3380 | struct pci_dev *dev = NULL; | |
ac1aa47b JB |
3381 | u8 cls = 0; |
3382 | u8 tmp; | |
3383 | ||
3384 | if (pci_cache_line_size) | |
3385 | printk(KERN_DEBUG "PCI: CLS %u bytes\n", | |
3386 | pci_cache_line_size << 2); | |
8d86fb2c | 3387 | |
95df8b87 | 3388 | pci_apply_fixup_final_quirks = true; |
4e344b1c | 3389 | for_each_pci_dev(dev) { |
8d86fb2c | 3390 | pci_fixup_device(pci_fixup_final, dev); |
ac1aa47b JB |
3391 | /* |
3392 | * If arch hasn't set it explicitly yet, use the CLS | |
3393 | * value shared by all PCI devices. If there's a | |
3394 | * mismatch, fall back to the default value. | |
3395 | */ | |
3396 | if (!pci_cache_line_size) { | |
3397 | pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp); | |
3398 | if (!cls) | |
3399 | cls = tmp; | |
3400 | if (!tmp || cls == tmp) | |
3401 | continue; | |
3402 | ||
227f0647 RD |
3403 | printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), using %u bytes\n", |
3404 | cls << 2, tmp << 2, | |
ac1aa47b JB |
3405 | pci_dfl_cache_line_size << 2); |
3406 | pci_cache_line_size = pci_dfl_cache_line_size; | |
3407 | } | |
3408 | } | |
735bff10 | 3409 | |
ac1aa47b JB |
3410 | if (!pci_cache_line_size) { |
3411 | printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n", | |
3412 | cls << 2, pci_dfl_cache_line_size << 2); | |
2820f333 | 3413 | pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; |
8d86fb2c DW |
3414 | } |
3415 | ||
3416 | return 0; | |
3417 | } | |
3418 | ||
cf6f3bf7 | 3419 | fs_initcall_sync(pci_apply_final_quirks); |
b9c3b266 DC |
3420 | |
3421 | /* | |
3422 | * Followings are device-specific reset methods which can be used to | |
3423 | * reset a single function if other methods (e.g. FLR, PM D0->D3) are | |
3424 | * not available. | |
3425 | */ | |
c763e7b5 DC |
3426 | static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) |
3427 | { | |
76b57c67 BH |
3428 | /* |
3429 | * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf | |
3430 | * | |
3431 | * The 82599 supports FLR on VFs, but FLR support is reported only | |
3432 | * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5). | |
3433 | * Therefore, we can't use pcie_flr(), which checks the VF DEVCAP. | |
3434 | */ | |
3435 | ||
c763e7b5 DC |
3436 | if (probe) |
3437 | return 0; | |
3438 | ||
4d708ab0 CL |
3439 | if (!pci_wait_for_pending_transaction(dev)) |
3440 | dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); | |
76b57c67 | 3441 | |
76b57c67 BH |
3442 | pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); |
3443 | ||
c763e7b5 DC |
3444 | msleep(100); |
3445 | ||
3446 | return 0; | |
3447 | } | |
3448 | ||
aba72ddc VS |
3449 | #define SOUTH_CHICKEN2 0xc2004 |
3450 | #define PCH_PP_STATUS 0xc7200 | |
3451 | #define PCH_PP_CONTROL 0xc7204 | |
df558de1 XH |
3452 | #define MSG_CTL 0x45010 |
3453 | #define NSDE_PWR_STATE 0xd0100 | |
3454 | #define IGD_OPERATION_TIMEOUT 10000 /* set timeout 10 seconds */ | |
3455 | ||
3456 | static int reset_ivb_igd(struct pci_dev *dev, int probe) | |
3457 | { | |
3458 | void __iomem *mmio_base; | |
3459 | unsigned long timeout; | |
3460 | u32 val; | |
3461 | ||
3462 | if (probe) | |
3463 | return 0; | |
3464 | ||
3465 | mmio_base = pci_iomap(dev, 0, 0); | |
3466 | if (!mmio_base) | |
3467 | return -ENOMEM; | |
3468 | ||
3469 | iowrite32(0x00000002, mmio_base + MSG_CTL); | |
3470 | ||
3471 | /* | |
3472 | * Clobbering SOUTH_CHICKEN2 register is fine only if the next | |
3473 | * driver loaded sets the right bits. However, this's a reset and | |
3474 | * the bits have been set by i915 previously, so we clobber | |
3475 | * SOUTH_CHICKEN2 register directly here. | |
3476 | */ | |
3477 | iowrite32(0x00000005, mmio_base + SOUTH_CHICKEN2); | |
3478 | ||
3479 | val = ioread32(mmio_base + PCH_PP_CONTROL) & 0xfffffffe; | |
3480 | iowrite32(val, mmio_base + PCH_PP_CONTROL); | |
3481 | ||
3482 | timeout = jiffies + msecs_to_jiffies(IGD_OPERATION_TIMEOUT); | |
3483 | do { | |
3484 | val = ioread32(mmio_base + PCH_PP_STATUS); | |
3485 | if ((val & 0xb0000000) == 0) | |
3486 | goto reset_complete; | |
3487 | msleep(10); | |
3488 | } while (time_before(jiffies, timeout)); | |
3489 | dev_warn(&dev->dev, "timeout during reset\n"); | |
3490 | ||
3491 | reset_complete: | |
3492 | iowrite32(0x00000002, mmio_base + NSDE_PWR_STATE); | |
3493 | ||
3494 | pci_iounmap(dev, mmio_base); | |
3495 | return 0; | |
3496 | } | |
3497 | ||
2c6217e0 CL |
3498 | /* |
3499 | * Device-specific reset method for Chelsio T4-based adapters. | |
3500 | */ | |
3501 | static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe) | |
3502 | { | |
3503 | u16 old_command; | |
3504 | u16 msix_flags; | |
3505 | ||
3506 | /* | |
3507 | * If this isn't a Chelsio T4-based device, return -ENOTTY indicating | |
3508 | * that we have no device-specific reset method. | |
3509 | */ | |
3510 | if ((dev->device & 0xf000) != 0x4000) | |
3511 | return -ENOTTY; | |
3512 | ||
3513 | /* | |
3514 | * If this is the "probe" phase, return 0 indicating that we can | |
3515 | * reset this device. | |
3516 | */ | |
3517 | if (probe) | |
3518 | return 0; | |
3519 | ||
3520 | /* | |
3521 | * T4 can wedge if there are DMAs in flight within the chip and Bus | |
3522 | * Master has been disabled. We need to have it on till the Function | |
3523 | * Level Reset completes. (BUS_MASTER is disabled in | |
3524 | * pci_reset_function()). | |
3525 | */ | |
3526 | pci_read_config_word(dev, PCI_COMMAND, &old_command); | |
3527 | pci_write_config_word(dev, PCI_COMMAND, | |
3528 | old_command | PCI_COMMAND_MASTER); | |
3529 | ||
3530 | /* | |
3531 | * Perform the actual device function reset, saving and restoring | |
3532 | * configuration information around the reset. | |
3533 | */ | |
3534 | pci_save_state(dev); | |
3535 | ||
3536 | /* | |
3537 | * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts | |
3538 | * are disabled when an MSI-X interrupt message needs to be delivered. | |
3539 | * So we briefly re-enable MSI-X interrupts for the duration of the | |
3540 | * FLR. The pci_restore_state() below will restore the original | |
3541 | * MSI-X state. | |
3542 | */ | |
3543 | pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags); | |
3544 | if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0) | |
3545 | pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, | |
3546 | msix_flags | | |
3547 | PCI_MSIX_FLAGS_ENABLE | | |
3548 | PCI_MSIX_FLAGS_MASKALL); | |
3549 | ||
3550 | /* | |
3551 | * Start of pcie_flr() code sequence. This reset code is a copy of | |
3552 | * the guts of pcie_flr() because that's not an exported function. | |
3553 | */ | |
3554 | ||
3555 | if (!pci_wait_for_pending_transaction(dev)) | |
3556 | dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); | |
3557 | ||
3558 | pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); | |
3559 | msleep(100); | |
3560 | ||
3561 | /* | |
3562 | * End of pcie_flr() code sequence. | |
3563 | */ | |
3564 | ||
3565 | /* | |
3566 | * Restore the configuration information (BAR values, etc.) including | |
3567 | * the original PCI Configuration Space Command word, and return | |
3568 | * success. | |
3569 | */ | |
3570 | pci_restore_state(dev); | |
3571 | pci_write_config_word(dev, PCI_COMMAND, old_command); | |
3572 | return 0; | |
3573 | } | |
3574 | ||
c763e7b5 | 3575 | #define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed |
df558de1 XH |
3576 | #define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156 |
3577 | #define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166 | |
c763e7b5 | 3578 | |
5b889bf2 | 3579 | static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { |
c763e7b5 DC |
3580 | { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, |
3581 | reset_intel_82599_sfp_virtfn }, | |
df558de1 XH |
3582 | { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA, |
3583 | reset_ivb_igd }, | |
3584 | { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA, | |
3585 | reset_ivb_igd }, | |
2c6217e0 CL |
3586 | { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, |
3587 | reset_chelsio_generic_dev }, | |
b9c3b266 DC |
3588 | { 0 } |
3589 | }; | |
5b889bf2 | 3590 | |
df558de1 XH |
3591 | /* |
3592 | * These device-specific reset methods are here rather than in a driver | |
3593 | * because when a host assigns a device to a guest VM, the host may need | |
3594 | * to reset the device but probably doesn't have a driver for it. | |
3595 | */ | |
5b889bf2 RW |
3596 | int pci_dev_specific_reset(struct pci_dev *dev, int probe) |
3597 | { | |
df9d1e8a | 3598 | const struct pci_dev_reset_methods *i; |
5b889bf2 RW |
3599 | |
3600 | for (i = pci_dev_reset_methods; i->reset; i++) { | |
3601 | if ((i->vendor == dev->vendor || | |
3602 | i->vendor == (u16)PCI_ANY_ID) && | |
3603 | (i->device == dev->device || | |
3604 | i->device == (u16)PCI_ANY_ID)) | |
3605 | return i->reset(dev, probe); | |
3606 | } | |
3607 | ||
3608 | return -ENOTTY; | |
3609 | } | |
12ea6cad | 3610 | |
ec637fb2 AW |
3611 | static void quirk_dma_func0_alias(struct pci_dev *dev) |
3612 | { | |
3613 | if (PCI_FUNC(dev->devfn) != 0) { | |
3614 | dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0); | |
3615 | dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; | |
3616 | } | |
3617 | } | |
3618 | ||
3619 | /* | |
3620 | * https://bugzilla.redhat.com/show_bug.cgi?id=605888 | |
3621 | * | |
3622 | * Some Ricoh devices use function 0 as the PCIe requester ID for DMA. | |
3623 | */ | |
3624 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias); | |
3625 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias); | |
3626 | ||
cc346a47 AW |
3627 | static void quirk_dma_func1_alias(struct pci_dev *dev) |
3628 | { | |
3629 | if (PCI_FUNC(dev->devfn) != 1) { | |
3630 | dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 1); | |
3631 | dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; | |
3632 | } | |
3633 | } | |
3634 | ||
3635 | /* | |
3636 | * Marvell 88SE9123 uses function 1 as the requester ID for DMA. In some | |
3637 | * SKUs function 1 is present and is a legacy IDE controller, in other | |
3638 | * SKUs this function is not present, making this a ghost requester. | |
3639 | * https://bugzilla.kernel.org/show_bug.cgi?id=42679 | |
3640 | */ | |
247de694 SA |
3641 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120, |
3642 | quirk_dma_func1_alias); | |
cc346a47 AW |
3643 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123, |
3644 | quirk_dma_func1_alias); | |
3645 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */ | |
3646 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130, | |
3647 | quirk_dma_func1_alias); | |
3648 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */ | |
3649 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172, | |
3650 | quirk_dma_func1_alias); | |
3651 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */ | |
3652 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a, | |
3653 | quirk_dma_func1_alias); | |
3654 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */ | |
3655 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0, | |
3656 | quirk_dma_func1_alias); | |
3657 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */ | |
3658 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230, | |
3659 | quirk_dma_func1_alias); | |
c2e0fb96 JC |
3660 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642, |
3661 | quirk_dma_func1_alias); | |
cc346a47 AW |
3662 | /* https://bugs.gentoo.org/show_bug.cgi?id=497630 */ |
3663 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON, | |
3664 | PCI_DEVICE_ID_JMICRON_JMB388_ESD, | |
3665 | quirk_dma_func1_alias); | |
8b9b963e TS |
3666 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c117 */ |
3667 | DECLARE_PCI_FIXUP_HEADER(0x1c28, /* Lite-On */ | |
3668 | 0x0122, /* Plextor M6E (Marvell 88SS9183)*/ | |
3669 | quirk_dma_func1_alias); | |
cc346a47 | 3670 | |
d3d2ab43 AW |
3671 | /* |
3672 | * Some devices DMA with the wrong devfn, not just the wrong function. | |
3673 | * quirk_fixed_dma_alias() uses this table to create fixed aliases, where | |
3674 | * the alias is "fixed" and independent of the device devfn. | |
3675 | * | |
3676 | * For example, the Adaptec 3405 is a PCIe card with an Intel 80333 I/O | |
3677 | * processor. To software, this appears as a PCIe-to-PCI/X bridge with a | |
3678 | * single device on the secondary bus. In reality, the single exposed | |
3679 | * device at 0e.0 is the Address Translation Unit (ATU) of the controller | |
3680 | * that provides a bridge to the internal bus of the I/O processor. The | |
3681 | * controller supports private devices, which can be hidden from PCI config | |
3682 | * space. In the case of the Adaptec 3405, a private device at 01.0 | |
3683 | * appears to be the DMA engine, which therefore needs to become a DMA | |
3684 | * alias for the device. | |
3685 | */ | |
3686 | static const struct pci_device_id fixed_dma_alias_tbl[] = { | |
3687 | { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, | |
3688 | PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */ | |
3689 | .driver_data = PCI_DEVFN(1, 0) }, | |
3690 | { 0 } | |
3691 | }; | |
3692 | ||
3693 | static void quirk_fixed_dma_alias(struct pci_dev *dev) | |
3694 | { | |
3695 | const struct pci_device_id *id; | |
3696 | ||
3697 | id = pci_match_id(fixed_dma_alias_tbl, dev); | |
3698 | if (id) { | |
3699 | dev->dma_alias_devfn = id->driver_data; | |
3700 | dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; | |
3701 | dev_info(&dev->dev, "Enabling fixed DMA alias to %02x.%d\n", | |
3702 | PCI_SLOT(dev->dma_alias_devfn), | |
3703 | PCI_FUNC(dev->dma_alias_devfn)); | |
3704 | } | |
3705 | } | |
3706 | ||
3707 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias); | |
3708 | ||
ebdb51eb AW |
3709 | /* |
3710 | * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in | |
3711 | * using the wrong DMA alias for the device. Some of these devices can be | |
3712 | * used as either forward or reverse bridges, so we need to test whether the | |
3713 | * device is operating in the correct mode. We could probably apply this | |
3714 | * quirk to PCI_ANY_ID, but for now we'll just use known offenders. The test | |
3715 | * is for a non-root, non-PCIe bridge where the upstream device is PCIe and | |
3716 | * is not a PCIe-to-PCI bridge, then @pdev is actually a PCIe-to-PCI bridge. | |
3717 | */ | |
3718 | static void quirk_use_pcie_bridge_dma_alias(struct pci_dev *pdev) | |
3719 | { | |
3720 | if (!pci_is_root_bus(pdev->bus) && | |
3721 | pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE && | |
3722 | !pci_is_pcie(pdev) && pci_is_pcie(pdev->bus->self) && | |
3723 | pci_pcie_type(pdev->bus->self) != PCI_EXP_TYPE_PCI_BRIDGE) | |
3724 | pdev->dev_flags |= PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS; | |
3725 | } | |
3726 | /* ASM1083/1085, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c46 */ | |
3727 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080, | |
3728 | quirk_use_pcie_bridge_dma_alias); | |
3729 | /* Tundra 8113, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c43 */ | |
3730 | DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias); | |
98ca50db AW |
3731 | /* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */ |
3732 | DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias); | |
8ab4abbe AW |
3733 | /* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */ |
3734 | DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias); | |
ebdb51eb | 3735 | |
3657cebd KHC |
3736 | /* |
3737 | * Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero) | |
3738 | * class code. Fix it. | |
3739 | */ | |
3740 | static void quirk_tw686x_class(struct pci_dev *pdev) | |
3741 | { | |
3742 | u32 class = pdev->class; | |
3743 | ||
3744 | /* Use "Multimedia controller" class */ | |
3745 | pdev->class = (PCI_CLASS_MULTIMEDIA_OTHER << 8) | 0x01; | |
3746 | dev_info(&pdev->dev, "TW686x PCI class overridden (%#08x -> %#08x)\n", | |
3747 | class, pdev->class); | |
3748 | } | |
2b4aed1d | 3749 | DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6864, PCI_CLASS_NOT_DEFINED, 8, |
3657cebd | 3750 | quirk_tw686x_class); |
2b4aed1d | 3751 | DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6865, PCI_CLASS_NOT_DEFINED, 8, |
3657cebd | 3752 | quirk_tw686x_class); |
2b4aed1d | 3753 | DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6868, PCI_CLASS_NOT_DEFINED, 8, |
3657cebd | 3754 | quirk_tw686x_class); |
2b4aed1d | 3755 | DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8, |
3657cebd KHC |
3756 | quirk_tw686x_class); |
3757 | ||
c56d4450 HS |
3758 | /* |
3759 | * Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same | |
3760 | * values for the Attribute as were supplied in the header of the | |
3761 | * corresponding Request, except as explicitly allowed when IDO is used." | |
3762 | * | |
3763 | * If a non-compliant device generates a completion with a different | |
3764 | * attribute than the request, the receiver may accept it (which itself | |
3765 | * seems non-compliant based on sec 2.3.2), or it may handle it as a | |
3766 | * Malformed TLP or an Unexpected Completion, which will probably lead to a | |
3767 | * device access timeout. | |
3768 | * | |
3769 | * If the non-compliant device generates completions with zero attributes | |
3770 | * (instead of copying the attributes from the request), we can work around | |
3771 | * this by disabling the "Relaxed Ordering" and "No Snoop" attributes in | |
3772 | * upstream devices so they always generate requests with zero attributes. | |
3773 | * | |
3774 | * This affects other devices under the same Root Port, but since these | |
3775 | * attributes are performance hints, there should be no functional problem. | |
3776 | * | |
3777 | * Note that Configuration Space accesses are never supposed to have TLP | |
3778 | * Attributes, so we're safe waiting till after any Configuration Space | |
3779 | * accesses to do the Root Port fixup. | |
3780 | */ | |
3781 | static void quirk_disable_root_port_attributes(struct pci_dev *pdev) | |
3782 | { | |
3783 | struct pci_dev *root_port = pci_find_pcie_root_port(pdev); | |
3784 | ||
3785 | if (!root_port) { | |
3786 | dev_warn(&pdev->dev, "PCIe Completion erratum may cause device errors\n"); | |
3787 | return; | |
3788 | } | |
3789 | ||
3790 | dev_info(&root_port->dev, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n", | |
3791 | dev_name(&pdev->dev)); | |
3792 | pcie_capability_clear_and_set_word(root_port, PCI_EXP_DEVCTL, | |
3793 | PCI_EXP_DEVCTL_RELAX_EN | | |
3794 | PCI_EXP_DEVCTL_NOSNOOP_EN, 0); | |
3795 | } | |
3796 | ||
3797 | /* | |
3798 | * The Chelsio T5 chip fails to copy TLP Attributes from a Request to the | |
3799 | * Completion it generates. | |
3800 | */ | |
3801 | static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev) | |
3802 | { | |
3803 | /* | |
3804 | * This mask/compare operation selects for Physical Function 4 on a | |
3805 | * T5. We only need to fix up the Root Port once for any of the | |
3806 | * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely | |
3807 | * 0x54xx so we use that one, | |
3808 | */ | |
3809 | if ((pdev->device & 0xff00) == 0x5400) | |
3810 | quirk_disable_root_port_attributes(pdev); | |
3811 | } | |
3812 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, | |
3813 | quirk_chelsio_T5_disable_root_port_attributes); | |
3814 | ||
15b100df AW |
3815 | /* |
3816 | * AMD has indicated that the devices below do not support peer-to-peer | |
3817 | * in any system where they are found in the southbridge with an AMD | |
3818 | * IOMMU in the system. Multifunction devices that do not support | |
3819 | * peer-to-peer between functions can claim to support a subset of ACS. | |
3820 | * Such devices effectively enable request redirect (RR) and completion | |
3821 | * redirect (CR) since all transactions are redirected to the upstream | |
3822 | * root complex. | |
3823 | * | |
3824 | * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94086 | |
3825 | * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94102 | |
3826 | * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/99402 | |
3827 | * | |
3828 | * 1002:4385 SBx00 SMBus Controller | |
3829 | * 1002:439c SB7x0/SB8x0/SB9x0 IDE Controller | |
3830 | * 1002:4383 SBx00 Azalia (Intel HDA) | |
3831 | * 1002:439d SB7x0/SB8x0/SB9x0 LPC host controller | |
3832 | * 1002:4384 SBx00 PCI to PCI Bridge | |
3833 | * 1002:4399 SB7x0/SB8x0/SB9x0 USB OHCI2 Controller | |
3587e625 MR |
3834 | * |
3835 | * https://bugzilla.kernel.org/show_bug.cgi?id=81841#c15 | |
3836 | * | |
3837 | * 1022:780f [AMD] FCH PCI Bridge | |
3838 | * 1022:7809 [AMD] FCH USB OHCI Controller | |
15b100df AW |
3839 | */ |
3840 | static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags) | |
3841 | { | |
3842 | #ifdef CONFIG_ACPI | |
3843 | struct acpi_table_header *header = NULL; | |
3844 | acpi_status status; | |
3845 | ||
3846 | /* Targeting multifunction devices on the SB (appears on root bus) */ | |
3847 | if (!dev->multifunction || !pci_is_root_bus(dev->bus)) | |
3848 | return -ENODEV; | |
3849 | ||
3850 | /* The IVRS table describes the AMD IOMMU */ | |
3851 | status = acpi_get_table("IVRS", 0, &header); | |
3852 | if (ACPI_FAILURE(status)) | |
3853 | return -ENODEV; | |
3854 | ||
3855 | /* Filter out flags not applicable to multifunction */ | |
3856 | acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT); | |
3857 | ||
3858 | return acs_flags & ~(PCI_ACS_RR | PCI_ACS_CR) ? 0 : 1; | |
3859 | #else | |
3860 | return -ENODEV; | |
3861 | #endif | |
3862 | } | |
3863 | ||
b404bcfb MJ |
3864 | static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags) |
3865 | { | |
3866 | /* | |
3867 | * Cavium devices matching this quirk do not perform peer-to-peer | |
3868 | * with other functions, allowing masking out these bits as if they | |
3869 | * were unimplemented in the ACS capability. | |
3870 | */ | |
3871 | acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | | |
3872 | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); | |
3873 | ||
3874 | return acs_flags ? 0 : 1; | |
3875 | } | |
3876 | ||
d99321b6 AW |
3877 | /* |
3878 | * Many Intel PCH root ports do provide ACS-like features to disable peer | |
3879 | * transactions and validate bus numbers in requests, but do not provide an | |
3880 | * actual PCIe ACS capability. This is the list of device IDs known to fall | |
3881 | * into that category as provided by Intel in Red Hat bugzilla 1037684. | |
3882 | */ | |
3883 | static const u16 pci_quirk_intel_pch_acs_ids[] = { | |
3884 | /* Ibexpeak PCH */ | |
3885 | 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49, | |
3886 | 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51, | |
3887 | /* Cougarpoint PCH */ | |
3888 | 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17, | |
3889 | 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f, | |
3890 | /* Pantherpoint PCH */ | |
3891 | 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17, | |
3892 | 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f, | |
3893 | /* Lynxpoint-H PCH */ | |
3894 | 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17, | |
3895 | 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f, | |
3896 | /* Lynxpoint-LP PCH */ | |
3897 | 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17, | |
3898 | 0x9c18, 0x9c19, 0x9c1a, 0x9c1b, | |
3899 | /* Wildcat PCH */ | |
3900 | 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97, | |
3901 | 0x9c98, 0x9c99, 0x9c9a, 0x9c9b, | |
1a30fd0d AW |
3902 | /* Patsburg (X79) PCH */ |
3903 | 0x1d10, 0x1d12, 0x1d14, 0x1d16, 0x1d18, 0x1d1a, 0x1d1c, 0x1d1e, | |
78e88358 AW |
3904 | /* Wellsburg (X99) PCH */ |
3905 | 0x8d10, 0x8d11, 0x8d12, 0x8d13, 0x8d14, 0x8d15, 0x8d16, 0x8d17, | |
3906 | 0x8d18, 0x8d19, 0x8d1a, 0x8d1b, 0x8d1c, 0x8d1d, 0x8d1e, | |
dca230d1 AW |
3907 | /* Lynx Point (9 series) PCH */ |
3908 | 0x8c90, 0x8c92, 0x8c94, 0x8c96, 0x8c98, 0x8c9a, 0x8c9c, 0x8c9e, | |
d99321b6 AW |
3909 | }; |
3910 | ||
3911 | static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev) | |
3912 | { | |
3913 | int i; | |
3914 | ||
3915 | /* Filter out a few obvious non-matches first */ | |
3916 | if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) | |
3917 | return false; | |
3918 | ||
3919 | for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++) | |
3920 | if (pci_quirk_intel_pch_acs_ids[i] == dev->device) | |
3921 | return true; | |
3922 | ||
3923 | return false; | |
3924 | } | |
3925 | ||
3926 | #define INTEL_PCH_ACS_FLAGS (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV) | |
3927 | ||
3928 | static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags) | |
3929 | { | |
3930 | u16 flags = dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK ? | |
3931 | INTEL_PCH_ACS_FLAGS : 0; | |
3932 | ||
3933 | if (!pci_quirk_intel_pch_acs_match(dev)) | |
3934 | return -ENOTTY; | |
3935 | ||
3936 | return acs_flags & ~flags ? 0 : 1; | |
3937 | } | |
3938 | ||
100ebb2c | 3939 | static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags) |
89b51cb5 AW |
3940 | { |
3941 | /* | |
3942 | * SV, TB, and UF are not relevant to multifunction endpoints. | |
3943 | * | |
100ebb2c AW |
3944 | * Multifunction devices are only required to implement RR, CR, and DT |
3945 | * in their ACS capability if they support peer-to-peer transactions. | |
3946 | * Devices matching this quirk have been verified by the vendor to not | |
3947 | * perform peer-to-peer with other functions, allowing us to mask out | |
3948 | * these bits as if they were unimplemented in the ACS capability. | |
89b51cb5 AW |
3949 | */ |
3950 | acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | | |
3951 | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); | |
3952 | ||
3953 | return acs_flags ? 0 : 1; | |
3954 | } | |
3955 | ||
ad805758 AW |
3956 | static const struct pci_dev_acs_enabled { |
3957 | u16 vendor; | |
3958 | u16 device; | |
3959 | int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags); | |
3960 | } pci_dev_acs_enabled[] = { | |
15b100df AW |
3961 | { PCI_VENDOR_ID_ATI, 0x4385, pci_quirk_amd_sb_acs }, |
3962 | { PCI_VENDOR_ID_ATI, 0x439c, pci_quirk_amd_sb_acs }, | |
3963 | { PCI_VENDOR_ID_ATI, 0x4383, pci_quirk_amd_sb_acs }, | |
3964 | { PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs }, | |
3965 | { PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs }, | |
3966 | { PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs }, | |
3587e625 MR |
3967 | { PCI_VENDOR_ID_AMD, 0x780f, pci_quirk_amd_sb_acs }, |
3968 | { PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs }, | |
100ebb2c AW |
3969 | { PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs }, |
3970 | { PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs }, | |
3971 | { PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs }, | |
3972 | { PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs }, | |
3973 | { PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs }, | |
3974 | { PCI_VENDOR_ID_INTEL, 0x10E1, pci_quirk_mf_endpoint_acs }, | |
3975 | { PCI_VENDOR_ID_INTEL, 0x10F1, pci_quirk_mf_endpoint_acs }, | |
3976 | { PCI_VENDOR_ID_INTEL, 0x10F7, pci_quirk_mf_endpoint_acs }, | |
3977 | { PCI_VENDOR_ID_INTEL, 0x10F8, pci_quirk_mf_endpoint_acs }, | |
3978 | { PCI_VENDOR_ID_INTEL, 0x10F9, pci_quirk_mf_endpoint_acs }, | |
3979 | { PCI_VENDOR_ID_INTEL, 0x10FA, pci_quirk_mf_endpoint_acs }, | |
3980 | { PCI_VENDOR_ID_INTEL, 0x10FB, pci_quirk_mf_endpoint_acs }, | |
3981 | { PCI_VENDOR_ID_INTEL, 0x10FC, pci_quirk_mf_endpoint_acs }, | |
3982 | { PCI_VENDOR_ID_INTEL, 0x1507, pci_quirk_mf_endpoint_acs }, | |
3983 | { PCI_VENDOR_ID_INTEL, 0x1514, pci_quirk_mf_endpoint_acs }, | |
3984 | { PCI_VENDOR_ID_INTEL, 0x151C, pci_quirk_mf_endpoint_acs }, | |
3985 | { PCI_VENDOR_ID_INTEL, 0x1529, pci_quirk_mf_endpoint_acs }, | |
3986 | { PCI_VENDOR_ID_INTEL, 0x152A, pci_quirk_mf_endpoint_acs }, | |
3987 | { PCI_VENDOR_ID_INTEL, 0x154D, pci_quirk_mf_endpoint_acs }, | |
3988 | { PCI_VENDOR_ID_INTEL, 0x154F, pci_quirk_mf_endpoint_acs }, | |
3989 | { PCI_VENDOR_ID_INTEL, 0x1551, pci_quirk_mf_endpoint_acs }, | |
3990 | { PCI_VENDOR_ID_INTEL, 0x1558, pci_quirk_mf_endpoint_acs }, | |
d748804f AW |
3991 | /* 82580 */ |
3992 | { PCI_VENDOR_ID_INTEL, 0x1509, pci_quirk_mf_endpoint_acs }, | |
3993 | { PCI_VENDOR_ID_INTEL, 0x150E, pci_quirk_mf_endpoint_acs }, | |
3994 | { PCI_VENDOR_ID_INTEL, 0x150F, pci_quirk_mf_endpoint_acs }, | |
3995 | { PCI_VENDOR_ID_INTEL, 0x1510, pci_quirk_mf_endpoint_acs }, | |
3996 | { PCI_VENDOR_ID_INTEL, 0x1511, pci_quirk_mf_endpoint_acs }, | |
3997 | { PCI_VENDOR_ID_INTEL, 0x1516, pci_quirk_mf_endpoint_acs }, | |
3998 | { PCI_VENDOR_ID_INTEL, 0x1527, pci_quirk_mf_endpoint_acs }, | |
3999 | /* 82576 */ | |
4000 | { PCI_VENDOR_ID_INTEL, 0x10C9, pci_quirk_mf_endpoint_acs }, | |
4001 | { PCI_VENDOR_ID_INTEL, 0x10E6, pci_quirk_mf_endpoint_acs }, | |
4002 | { PCI_VENDOR_ID_INTEL, 0x10E7, pci_quirk_mf_endpoint_acs }, | |
4003 | { PCI_VENDOR_ID_INTEL, 0x10E8, pci_quirk_mf_endpoint_acs }, | |
4004 | { PCI_VENDOR_ID_INTEL, 0x150A, pci_quirk_mf_endpoint_acs }, | |
4005 | { PCI_VENDOR_ID_INTEL, 0x150D, pci_quirk_mf_endpoint_acs }, | |
4006 | { PCI_VENDOR_ID_INTEL, 0x1518, pci_quirk_mf_endpoint_acs }, | |
4007 | { PCI_VENDOR_ID_INTEL, 0x1526, pci_quirk_mf_endpoint_acs }, | |
4008 | /* 82575 */ | |
4009 | { PCI_VENDOR_ID_INTEL, 0x10A7, pci_quirk_mf_endpoint_acs }, | |
4010 | { PCI_VENDOR_ID_INTEL, 0x10A9, pci_quirk_mf_endpoint_acs }, | |
4011 | { PCI_VENDOR_ID_INTEL, 0x10D6, pci_quirk_mf_endpoint_acs }, | |
4012 | /* I350 */ | |
4013 | { PCI_VENDOR_ID_INTEL, 0x1521, pci_quirk_mf_endpoint_acs }, | |
4014 | { PCI_VENDOR_ID_INTEL, 0x1522, pci_quirk_mf_endpoint_acs }, | |
4015 | { PCI_VENDOR_ID_INTEL, 0x1523, pci_quirk_mf_endpoint_acs }, | |
4016 | { PCI_VENDOR_ID_INTEL, 0x1524, pci_quirk_mf_endpoint_acs }, | |
4017 | /* 82571 (Quads omitted due to non-ACS switch) */ | |
4018 | { PCI_VENDOR_ID_INTEL, 0x105E, pci_quirk_mf_endpoint_acs }, | |
4019 | { PCI_VENDOR_ID_INTEL, 0x105F, pci_quirk_mf_endpoint_acs }, | |
4020 | { PCI_VENDOR_ID_INTEL, 0x1060, pci_quirk_mf_endpoint_acs }, | |
4021 | { PCI_VENDOR_ID_INTEL, 0x10D9, pci_quirk_mf_endpoint_acs }, | |
95e16587 AW |
4022 | /* I219 */ |
4023 | { PCI_VENDOR_ID_INTEL, 0x15b7, pci_quirk_mf_endpoint_acs }, | |
4024 | { PCI_VENDOR_ID_INTEL, 0x15b8, pci_quirk_mf_endpoint_acs }, | |
d748804f | 4025 | /* Intel PCH root ports */ |
d99321b6 | 4026 | { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs }, |
6a3763d1 VV |
4027 | { 0x19a2, 0x710, pci_quirk_mf_endpoint_acs }, /* Emulex BE3-R */ |
4028 | { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */ | |
b404bcfb MJ |
4029 | /* Cavium ThunderX */ |
4030 | { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs }, | |
ad805758 AW |
4031 | { 0 } |
4032 | }; | |
4033 | ||
4034 | int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags) | |
4035 | { | |
4036 | const struct pci_dev_acs_enabled *i; | |
4037 | int ret; | |
4038 | ||
4039 | /* | |
4040 | * Allow devices that do not expose standard PCIe ACS capabilities | |
4041 | * or control to indicate their support here. Multi-function express | |
4042 | * devices which do not allow internal peer-to-peer between functions, | |
4043 | * but do not implement PCIe ACS may wish to return true here. | |
4044 | */ | |
4045 | for (i = pci_dev_acs_enabled; i->acs_enabled; i++) { | |
4046 | if ((i->vendor == dev->vendor || | |
4047 | i->vendor == (u16)PCI_ANY_ID) && | |
4048 | (i->device == dev->device || | |
4049 | i->device == (u16)PCI_ANY_ID)) { | |
4050 | ret = i->acs_enabled(dev, acs_flags); | |
4051 | if (ret >= 0) | |
4052 | return ret; | |
4053 | } | |
4054 | } | |
4055 | ||
4056 | return -ENOTTY; | |
4057 | } | |
2c744244 | 4058 | |
d99321b6 AW |
4059 | /* Config space offset of Root Complex Base Address register */ |
4060 | #define INTEL_LPC_RCBA_REG 0xf0 | |
4061 | /* 31:14 RCBA address */ | |
4062 | #define INTEL_LPC_RCBA_MASK 0xffffc000 | |
4063 | /* RCBA Enable */ | |
4064 | #define INTEL_LPC_RCBA_ENABLE (1 << 0) | |
4065 | ||
4066 | /* Backbone Scratch Pad Register */ | |
4067 | #define INTEL_BSPR_REG 0x1104 | |
4068 | /* Backbone Peer Non-Posted Disable */ | |
4069 | #define INTEL_BSPR_REG_BPNPD (1 << 8) | |
4070 | /* Backbone Peer Posted Disable */ | |
4071 | #define INTEL_BSPR_REG_BPPD (1 << 9) | |
4072 | ||
4073 | /* Upstream Peer Decode Configuration Register */ | |
4074 | #define INTEL_UPDCR_REG 0x1114 | |
4075 | /* 5:0 Peer Decode Enable bits */ | |
4076 | #define INTEL_UPDCR_REG_MASK 0x3f | |
4077 | ||
4078 | static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev) | |
4079 | { | |
4080 | u32 rcba, bspr, updcr; | |
4081 | void __iomem *rcba_mem; | |
4082 | ||
4083 | /* | |
4084 | * Read the RCBA register from the LPC (D31:F0). PCH root ports | |
4085 | * are D28:F* and therefore get probed before LPC, thus we can't | |
4086 | * use pci_get_slot/pci_read_config_dword here. | |
4087 | */ | |
4088 | pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0), | |
4089 | INTEL_LPC_RCBA_REG, &rcba); | |
4090 | if (!(rcba & INTEL_LPC_RCBA_ENABLE)) | |
4091 | return -EINVAL; | |
4092 | ||
4093 | rcba_mem = ioremap_nocache(rcba & INTEL_LPC_RCBA_MASK, | |
4094 | PAGE_ALIGN(INTEL_UPDCR_REG)); | |
4095 | if (!rcba_mem) | |
4096 | return -ENOMEM; | |
4097 | ||
4098 | /* | |
4099 | * The BSPR can disallow peer cycles, but it's set by soft strap and | |
4100 | * therefore read-only. If both posted and non-posted peer cycles are | |
4101 | * disallowed, we're ok. If either are allowed, then we need to use | |
4102 | * the UPDCR to disable peer decodes for each port. This provides the | |
4103 | * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | |
4104 | */ | |
4105 | bspr = readl(rcba_mem + INTEL_BSPR_REG); | |
4106 | bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD; | |
4107 | if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) { | |
4108 | updcr = readl(rcba_mem + INTEL_UPDCR_REG); | |
4109 | if (updcr & INTEL_UPDCR_REG_MASK) { | |
4110 | dev_info(&dev->dev, "Disabling UPDCR peer decodes\n"); | |
4111 | updcr &= ~INTEL_UPDCR_REG_MASK; | |
4112 | writel(updcr, rcba_mem + INTEL_UPDCR_REG); | |
4113 | } | |
4114 | } | |
4115 | ||
4116 | iounmap(rcba_mem); | |
4117 | return 0; | |
4118 | } | |
4119 | ||
4120 | /* Miscellaneous Port Configuration register */ | |
4121 | #define INTEL_MPC_REG 0xd8 | |
4122 | /* MPC: Invalid Receive Bus Number Check Enable */ | |
4123 | #define INTEL_MPC_REG_IRBNCE (1 << 26) | |
4124 | ||
4125 | static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev) | |
4126 | { | |
4127 | u32 mpc; | |
4128 | ||
4129 | /* | |
4130 | * When enabled, the IRBNCE bit of the MPC register enables the | |
4131 | * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which | |
4132 | * ensures that requester IDs fall within the bus number range | |
4133 | * of the bridge. Enable if not already. | |
4134 | */ | |
4135 | pci_read_config_dword(dev, INTEL_MPC_REG, &mpc); | |
4136 | if (!(mpc & INTEL_MPC_REG_IRBNCE)) { | |
4137 | dev_info(&dev->dev, "Enabling MPC IRBNCE\n"); | |
4138 | mpc |= INTEL_MPC_REG_IRBNCE; | |
4139 | pci_write_config_word(dev, INTEL_MPC_REG, mpc); | |
4140 | } | |
4141 | } | |
4142 | ||
4143 | static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev) | |
4144 | { | |
4145 | if (!pci_quirk_intel_pch_acs_match(dev)) | |
4146 | return -ENOTTY; | |
4147 | ||
4148 | if (pci_quirk_enable_intel_lpc_acs(dev)) { | |
4149 | dev_warn(&dev->dev, "Failed to enable Intel PCH ACS quirk\n"); | |
4150 | return 0; | |
4151 | } | |
4152 | ||
4153 | pci_quirk_enable_intel_rp_mpc_acs(dev); | |
4154 | ||
4155 | dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK; | |
4156 | ||
4157 | dev_info(&dev->dev, "Intel PCH root port ACS workaround enabled\n"); | |
4158 | ||
4159 | return 0; | |
4160 | } | |
4161 | ||
2c744244 AW |
4162 | static const struct pci_dev_enable_acs { |
4163 | u16 vendor; | |
4164 | u16 device; | |
4165 | int (*enable_acs)(struct pci_dev *dev); | |
4166 | } pci_dev_enable_acs[] = { | |
d99321b6 | 4167 | { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_pch_acs }, |
2c744244 AW |
4168 | { 0 } |
4169 | }; | |
4170 | ||
4171 | void pci_dev_specific_enable_acs(struct pci_dev *dev) | |
4172 | { | |
4173 | const struct pci_dev_enable_acs *i; | |
4174 | int ret; | |
4175 | ||
4176 | for (i = pci_dev_enable_acs; i->enable_acs; i++) { | |
4177 | if ((i->vendor == dev->vendor || | |
4178 | i->vendor == (u16)PCI_ANY_ID) && | |
4179 | (i->device == dev->device || | |
4180 | i->device == (u16)PCI_ANY_ID)) { | |
4181 | ret = i->enable_acs(dev); | |
4182 | if (ret >= 0) | |
4183 | return; | |
4184 | } | |
4185 | } | |
4186 | } | |
3388a614 TS |
4187 | |
4188 | /* | |
4189 | * The PCI capabilities list for Intel DH895xCC VFs (device id 0x0443) with | |
4190 | * QuickAssist Technology (QAT) is prematurely terminated in hardware. The | |
4191 | * Next Capability pointer in the MSI Capability Structure should point to | |
4192 | * the PCIe Capability Structure but is incorrectly hardwired as 0 terminating | |
4193 | * the list. | |
4194 | */ | |
4195 | static void quirk_intel_qat_vf_cap(struct pci_dev *pdev) | |
4196 | { | |
4197 | int pos, i = 0; | |
4198 | u8 next_cap; | |
4199 | u16 reg16, *cap; | |
4200 | struct pci_cap_saved_state *state; | |
4201 | ||
4202 | /* Bail if the hardware bug is fixed */ | |
4203 | if (pdev->pcie_cap || pci_find_capability(pdev, PCI_CAP_ID_EXP)) | |
4204 | return; | |
4205 | ||
4206 | /* Bail if MSI Capability Structure is not found for some reason */ | |
4207 | pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); | |
4208 | if (!pos) | |
4209 | return; | |
4210 | ||
4211 | /* | |
4212 | * Bail if Next Capability pointer in the MSI Capability Structure | |
4213 | * is not the expected incorrect 0x00. | |
4214 | */ | |
4215 | pci_read_config_byte(pdev, pos + 1, &next_cap); | |
4216 | if (next_cap) | |
4217 | return; | |
4218 | ||
4219 | /* | |
4220 | * PCIe Capability Structure is expected to be at 0x50 and should | |
4221 | * terminate the list (Next Capability pointer is 0x00). Verify | |
4222 | * Capability Id and Next Capability pointer is as expected. | |
4223 | * Open-code some of set_pcie_port_type() and pci_cfg_space_size_ext() | |
4224 | * to correctly set kernel data structures which have already been | |
4225 | * set incorrectly due to the hardware bug. | |
4226 | */ | |
4227 | pos = 0x50; | |
4228 | pci_read_config_word(pdev, pos, ®16); | |
4229 | if (reg16 == (0x0000 | PCI_CAP_ID_EXP)) { | |
4230 | u32 status; | |
4231 | #ifndef PCI_EXP_SAVE_REGS | |
4232 | #define PCI_EXP_SAVE_REGS 7 | |
4233 | #endif | |
4234 | int size = PCI_EXP_SAVE_REGS * sizeof(u16); | |
4235 | ||
4236 | pdev->pcie_cap = pos; | |
4237 | pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); | |
4238 | pdev->pcie_flags_reg = reg16; | |
4239 | pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16); | |
4240 | pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD; | |
4241 | ||
4242 | pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE; | |
4243 | if (pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status) != | |
4244 | PCIBIOS_SUCCESSFUL || (status == 0xffffffff)) | |
4245 | pdev->cfg_size = PCI_CFG_SPACE_SIZE; | |
4246 | ||
4247 | if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP)) | |
4248 | return; | |
4249 | ||
4250 | /* | |
4251 | * Save PCIE cap | |
4252 | */ | |
4253 | state = kzalloc(sizeof(*state) + size, GFP_KERNEL); | |
4254 | if (!state) | |
4255 | return; | |
4256 | ||
4257 | state->cap.cap_nr = PCI_CAP_ID_EXP; | |
4258 | state->cap.cap_extended = 0; | |
4259 | state->cap.size = size; | |
4260 | cap = (u16 *)&state->cap.data[0]; | |
4261 | pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap[i++]); | |
4262 | pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &cap[i++]); | |
4263 | pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &cap[i++]); | |
4264 | pcie_capability_read_word(pdev, PCI_EXP_RTCTL, &cap[i++]); | |
4265 | pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap[i++]); | |
4266 | pcie_capability_read_word(pdev, PCI_EXP_LNKCTL2, &cap[i++]); | |
4267 | pcie_capability_read_word(pdev, PCI_EXP_SLTCTL2, &cap[i++]); | |
4268 | hlist_add_head(&state->next, &pdev->saved_cap_space); | |
4269 | } | |
4270 | } | |
4271 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap); |