]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * This file contains work-arounds for many known PCI hardware | |
3 | * bugs. Devices present only on certain architectures (host | |
4 | * bridges et cetera) should be handled in arch-specific code. | |
5 | * | |
6 | * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. | |
7 | * | |
8 | * Copyright (c) 1999 Martin Mares <mj@ucw.cz> | |
9 | * | |
7586269c DB |
10 | * Init/reset quirks for USB host controllers should be in the |
11 | * USB quirks file, where their drivers can access reuse it. | |
1da177e4 LT |
12 | */ |
13 | ||
1da177e4 LT |
14 | #include <linux/types.h> |
15 | #include <linux/kernel.h> | |
363c75db | 16 | #include <linux/export.h> |
1da177e4 LT |
17 | #include <linux/pci.h> |
18 | #include <linux/init.h> | |
19 | #include <linux/delay.h> | |
25be5e6c | 20 | #include <linux/acpi.h> |
9f23ed3b | 21 | #include <linux/kallsyms.h> |
75e07fc3 | 22 | #include <linux/dmi.h> |
649426ef | 23 | #include <linux/pci-aspm.h> |
32a9a682 | 24 | #include <linux/ioport.h> |
3209874a AV |
25 | #include <linux/sched.h> |
26 | #include <linux/ktime.h> | |
9fe373f9 | 27 | #include <linux/mm.h> |
630b3aff | 28 | #include <linux/platform_data/x86/apple.h> |
93177a74 | 29 | #include <asm/dma.h> /* isa_dma_bridge_buggy */ |
bc56b9e0 | 30 | #include "pci.h" |
1da177e4 | 31 | |
253d2e54 JP |
32 | /* |
33 | * Decoding should be disabled for a PCI device during BAR sizing to avoid | |
34 | * conflict. But doing so may cause problems on host bridge and perhaps other | |
35 | * key system devices. For devices that need to have mmio decoding always-on, | |
36 | * we need to set the dev->mmio_always_on bit. | |
37 | */ | |
15856ad5 | 38 | static void quirk_mmio_always_on(struct pci_dev *dev) |
253d2e54 | 39 | { |
52d21b5e | 40 | dev->mmio_always_on = 1; |
253d2e54 | 41 | } |
52d21b5e YL |
42 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, |
43 | PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); | |
253d2e54 | 44 | |
bd8481e1 DT |
45 | /* The Mellanox Tavor device gives false positive parity errors |
46 | * Mark this device with a broken_parity_status, to allow | |
47 | * PCI scanning code to "skip" this now blacklisted device. | |
48 | */ | |
15856ad5 | 49 | static void quirk_mellanox_tavor(struct pci_dev *dev) |
bd8481e1 DT |
50 | { |
51 | dev->broken_parity_status = 1; /* This device gives false positives */ | |
52 | } | |
3c78bc61 RD |
53 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, quirk_mellanox_tavor); |
54 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, quirk_mellanox_tavor); | |
bd8481e1 | 55 | |
f7625980 | 56 | /* Deal with broken BIOSes that neglect to enable passive release, |
1da177e4 | 57 | which can cause problems in combination with the 82441FX/PPro MTRRs */ |
1597cacb | 58 | static void quirk_passive_release(struct pci_dev *dev) |
1da177e4 LT |
59 | { |
60 | struct pci_dev *d = NULL; | |
61 | unsigned char dlc; | |
62 | ||
63 | /* We have to make sure a particular bit is set in the PIIX3 | |
64 | ISA bridge, so we have to go out and find it. */ | |
65 | while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { | |
66 | pci_read_config_byte(d, 0x82, &dlc); | |
67 | if (!(dlc & 1<<1)) { | |
999da9fd | 68 | dev_info(&d->dev, "PIIX3: Enabling Passive Release\n"); |
1da177e4 LT |
69 | dlc |= 1<<1; |
70 | pci_write_config_byte(d, 0x82, dlc); | |
71 | } | |
72 | } | |
73 | } | |
652c538e AM |
74 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); |
75 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); | |
1da177e4 LT |
76 | |
77 | /* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround | |
78 | but VIA don't answer queries. If you happen to have good contacts at VIA | |
f7625980 BH |
79 | ask them for me please -- Alan |
80 | ||
81 | This appears to be BIOS not version dependent. So presumably there is a | |
1da177e4 | 82 | chipset level fix */ |
f7625980 | 83 | |
15856ad5 | 84 | static void quirk_isa_dma_hangs(struct pci_dev *dev) |
1da177e4 LT |
85 | { |
86 | if (!isa_dma_bridge_buggy) { | |
3c78bc61 | 87 | isa_dma_bridge_buggy = 1; |
f0fda801 | 88 | dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n"); |
1da177e4 LT |
89 | } |
90 | } | |
91 | /* | |
92 | * Its not totally clear which chipsets are the problematic ones | |
93 | * We know 82C586 and 82C596 variants are affected. | |
94 | */ | |
652c538e AM |
95 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); |
96 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); | |
97 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); | |
f7625980 | 98 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); |
652c538e AM |
99 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs); |
100 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs); | |
101 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); | |
1da177e4 | 102 | |
4731fdcf LB |
103 | /* |
104 | * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear | |
105 | * for some HT machines to use C4 w/o hanging. | |
106 | */ | |
15856ad5 | 107 | static void quirk_tigerpoint_bm_sts(struct pci_dev *dev) |
4731fdcf LB |
108 | { |
109 | u32 pmbase; | |
110 | u16 pm1a; | |
111 | ||
112 | pci_read_config_dword(dev, 0x40, &pmbase); | |
113 | pmbase = pmbase & 0xff80; | |
114 | pm1a = inw(pmbase); | |
115 | ||
116 | if (pm1a & 0x10) { | |
117 | dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); | |
118 | outw(0x10, pmbase); | |
119 | } | |
120 | } | |
121 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); | |
122 | ||
1da177e4 LT |
123 | /* |
124 | * Chipsets where PCI->PCI transfers vanish or hang | |
125 | */ | |
15856ad5 | 126 | static void quirk_nopcipci(struct pci_dev *dev) |
1da177e4 | 127 | { |
3c78bc61 | 128 | if ((pci_pci_problems & PCIPCI_FAIL) == 0) { |
f0fda801 | 129 | dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n"); |
1da177e4 LT |
130 | pci_pci_problems |= PCIPCI_FAIL; |
131 | } | |
132 | } | |
652c538e AM |
133 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); |
134 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); | |
236561e5 | 135 | |
15856ad5 | 136 | static void quirk_nopciamd(struct pci_dev *dev) |
236561e5 AC |
137 | { |
138 | u8 rev; | |
139 | pci_read_config_byte(dev, 0x08, &rev); | |
140 | if (rev == 0x13) { | |
141 | /* Erratum 24 */ | |
f0fda801 | 142 | dev_info(&dev->dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n"); |
236561e5 AC |
143 | pci_pci_problems |= PCIAGP_FAIL; |
144 | } | |
145 | } | |
652c538e | 146 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd); |
1da177e4 LT |
147 | |
148 | /* | |
149 | * Triton requires workarounds to be used by the drivers | |
150 | */ | |
15856ad5 | 151 | static void quirk_triton(struct pci_dev *dev) |
1da177e4 | 152 | { |
3c78bc61 | 153 | if ((pci_pci_problems&PCIPCI_TRITON) == 0) { |
f0fda801 | 154 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
155 | pci_pci_problems |= PCIPCI_TRITON; |
156 | } | |
157 | } | |
f7625980 BH |
158 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); |
159 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); | |
160 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); | |
161 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); | |
1da177e4 LT |
162 | |
163 | /* | |
164 | * VIA Apollo KT133 needs PCI latency patch | |
165 | * Made according to a windows driver based patch by George E. Breese | |
166 | * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm | |
3c78bc61 RD |
167 | * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for |
168 | * the info on which Mr Breese based his work. | |
1da177e4 LT |
169 | * |
170 | * Updated based on further information from the site and also on | |
f7625980 | 171 | * information provided by VIA |
1da177e4 | 172 | */ |
1597cacb | 173 | static void quirk_vialatency(struct pci_dev *dev) |
1da177e4 LT |
174 | { |
175 | struct pci_dev *p; | |
1da177e4 LT |
176 | u8 busarb; |
177 | /* Ok we have a potential problem chipset here. Now see if we have | |
178 | a buggy southbridge */ | |
f7625980 | 179 | |
1da177e4 | 180 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); |
3c78bc61 | 181 | if (p != NULL) { |
1da177e4 LT |
182 | /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ |
183 | /* Check for buggy part revisions */ | |
2b1afa87 | 184 | if (p->revision < 0x40 || p->revision > 0x42) |
1da177e4 LT |
185 | goto exit; |
186 | } else { | |
187 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); | |
3c78bc61 | 188 | if (p == NULL) /* No problem parts */ |
1da177e4 | 189 | goto exit; |
1da177e4 | 190 | /* Check for buggy part revisions */ |
2b1afa87 | 191 | if (p->revision < 0x10 || p->revision > 0x12) |
1da177e4 LT |
192 | goto exit; |
193 | } | |
f7625980 | 194 | |
1da177e4 | 195 | /* |
f7625980 | 196 | * Ok we have the problem. Now set the PCI master grant to |
1da177e4 LT |
197 | * occur every master grant. The apparent bug is that under high |
198 | * PCI load (quite common in Linux of course) you can get data | |
199 | * loss when the CPU is held off the bus for 3 bus master requests | |
200 | * This happens to include the IDE controllers.... | |
201 | * | |
202 | * VIA only apply this fix when an SB Live! is present but under | |
25985edc | 203 | * both Linux and Windows this isn't enough, and we have seen |
1da177e4 LT |
204 | * corruption without SB Live! but with things like 3 UDMA IDE |
205 | * controllers. So we ignore that bit of the VIA recommendation.. | |
206 | */ | |
207 | ||
208 | pci_read_config_byte(dev, 0x76, &busarb); | |
f7625980 | 209 | /* Set bit 4 and bi 5 of byte 76 to 0x01 |
1da177e4 LT |
210 | "Master priority rotation on every PCI master grant */ |
211 | busarb &= ~(1<<5); | |
212 | busarb |= (1<<4); | |
213 | pci_write_config_byte(dev, 0x76, busarb); | |
f0fda801 | 214 | dev_info(&dev->dev, "Applying VIA southbridge workaround\n"); |
1da177e4 LT |
215 | exit: |
216 | pci_dev_put(p); | |
217 | } | |
652c538e AM |
218 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); |
219 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); | |
220 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); | |
1597cacb | 221 | /* Must restore this on a resume from RAM */ |
652c538e AM |
222 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); |
223 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); | |
224 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); | |
1da177e4 LT |
225 | |
226 | /* | |
227 | * VIA Apollo VP3 needs ETBF on BT848/878 | |
228 | */ | |
15856ad5 | 229 | static void quirk_viaetbf(struct pci_dev *dev) |
1da177e4 | 230 | { |
3c78bc61 | 231 | if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) { |
f0fda801 | 232 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
233 | pci_pci_problems |= PCIPCI_VIAETBF; |
234 | } | |
235 | } | |
652c538e | 236 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); |
1da177e4 | 237 | |
15856ad5 | 238 | static void quirk_vsfx(struct pci_dev *dev) |
1da177e4 | 239 | { |
3c78bc61 | 240 | if ((pci_pci_problems&PCIPCI_VSFX) == 0) { |
f0fda801 | 241 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
242 | pci_pci_problems |= PCIPCI_VSFX; |
243 | } | |
244 | } | |
652c538e | 245 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx); |
1da177e4 LT |
246 | |
247 | /* | |
248 | * Ali Magik requires workarounds to be used by the drivers | |
249 | * that DMA to AGP space. Latency must be set to 0xA and triton | |
250 | * workaround applied too | |
251 | * [Info kindly provided by ALi] | |
f7625980 | 252 | */ |
15856ad5 | 253 | static void quirk_alimagik(struct pci_dev *dev) |
1da177e4 | 254 | { |
3c78bc61 | 255 | if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) { |
f0fda801 | 256 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
257 | pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; |
258 | } | |
259 | } | |
f7625980 BH |
260 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); |
261 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); | |
1da177e4 LT |
262 | |
263 | /* | |
264 | * Natoma has some interesting boundary conditions with Zoran stuff | |
265 | * at least | |
266 | */ | |
15856ad5 | 267 | static void quirk_natoma(struct pci_dev *dev) |
1da177e4 | 268 | { |
3c78bc61 | 269 | if ((pci_pci_problems&PCIPCI_NATOMA) == 0) { |
f0fda801 | 270 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
1da177e4 LT |
271 | pci_pci_problems |= PCIPCI_NATOMA; |
272 | } | |
273 | } | |
f7625980 BH |
274 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); |
275 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); | |
276 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); | |
277 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); | |
278 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); | |
279 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); | |
1da177e4 LT |
280 | |
281 | /* | |
282 | * This chip can cause PCI parity errors if config register 0xA0 is read | |
283 | * while DMAs are occurring. | |
284 | */ | |
15856ad5 | 285 | static void quirk_citrine(struct pci_dev *dev) |
1da177e4 LT |
286 | { |
287 | dev->cfg_size = 0xA0; | |
288 | } | |
652c538e | 289 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine); |
1da177e4 | 290 | |
9f33a2ae JM |
291 | /* |
292 | * This chip can cause bus lockups if config addresses above 0x600 | |
293 | * are read or written. | |
294 | */ | |
295 | static void quirk_nfp6000(struct pci_dev *dev) | |
296 | { | |
297 | dev->cfg_size = 0x600; | |
298 | } | |
c2e771b0 | 299 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP4000, quirk_nfp6000); |
9f33a2ae JM |
300 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000, quirk_nfp6000); |
301 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000_VF, quirk_nfp6000); | |
302 | ||
9fe373f9 DL |
303 | /* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */ |
304 | static void quirk_extend_bar_to_page(struct pci_dev *dev) | |
305 | { | |
306 | int i; | |
307 | ||
2f686f1d | 308 | for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { |
9fe373f9 DL |
309 | struct resource *r = &dev->resource[i]; |
310 | ||
311 | if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) { | |
312 | r->end = PAGE_SIZE - 1; | |
313 | r->start = 0; | |
314 | r->flags |= IORESOURCE_UNSET; | |
315 | dev_info(&dev->dev, "expanded BAR %d to page size: %pR\n", | |
316 | i, r); | |
317 | } | |
318 | } | |
319 | } | |
320 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page); | |
321 | ||
1da177e4 LT |
322 | /* |
323 | * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. | |
324 | * If it's needed, re-allocate the region. | |
325 | */ | |
15856ad5 | 326 | static void quirk_s3_64M(struct pci_dev *dev) |
1da177e4 LT |
327 | { |
328 | struct resource *r = &dev->resource[0]; | |
329 | ||
330 | if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { | |
bd064f0a | 331 | r->flags |= IORESOURCE_UNSET; |
1da177e4 LT |
332 | r->start = 0; |
333 | r->end = 0x3ffffff; | |
334 | } | |
335 | } | |
652c538e AM |
336 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); |
337 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); | |
1da177e4 | 338 | |
06cf35f9 MS |
339 | static void quirk_io(struct pci_dev *dev, int pos, unsigned size, |
340 | const char *name) | |
341 | { | |
342 | u32 region; | |
343 | struct pci_bus_region bus_region; | |
344 | struct resource *res = dev->resource + pos; | |
345 | ||
346 | pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), ®ion); | |
347 | ||
348 | if (!region) | |
349 | return; | |
350 | ||
351 | res->name = pci_name(dev); | |
352 | res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK; | |
353 | res->flags |= | |
354 | (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN); | |
355 | region &= ~(size - 1); | |
356 | ||
357 | /* Convert from PCI bus to resource space */ | |
358 | bus_region.start = region; | |
359 | bus_region.end = region + size - 1; | |
360 | pcibios_bus_to_resource(dev->bus, res, &bus_region); | |
361 | ||
362 | dev_info(&dev->dev, FW_BUG "%s quirk: reg 0x%x: %pR\n", | |
363 | name, PCI_BASE_ADDRESS_0 + (pos << 2), res); | |
364 | } | |
365 | ||
73d2eaac AS |
366 | /* |
367 | * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS | |
368 | * ver. 1.33 20070103) don't set the correct ISA PCI region header info. | |
369 | * BAR0 should be 8 bytes; instead, it may be set to something like 8k | |
370 | * (which conflicts w/ BAR1's memory range). | |
06cf35f9 MS |
371 | * |
372 | * CS553x's ISA PCI BARs may also be read-only (ref: | |
373 | * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward). | |
73d2eaac | 374 | */ |
15856ad5 | 375 | static void quirk_cs5536_vsa(struct pci_dev *dev) |
73d2eaac | 376 | { |
06cf35f9 MS |
377 | static char *name = "CS5536 ISA bridge"; |
378 | ||
73d2eaac | 379 | if (pci_resource_len(dev, 0) != 8) { |
06cf35f9 MS |
380 | quirk_io(dev, 0, 8, name); /* SMB */ |
381 | quirk_io(dev, 1, 256, name); /* GPIO */ | |
382 | quirk_io(dev, 2, 64, name); /* MFGPT */ | |
383 | dev_info(&dev->dev, "%s bug detected (incorrect header); workaround applied\n", | |
384 | name); | |
73d2eaac AS |
385 | } |
386 | } | |
387 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); | |
388 | ||
65195c76 YL |
389 | static void quirk_io_region(struct pci_dev *dev, int port, |
390 | unsigned size, int nr, const char *name) | |
391 | { | |
392 | u16 region; | |
393 | struct pci_bus_region bus_region; | |
394 | struct resource *res = dev->resource + nr; | |
395 | ||
396 | pci_read_config_word(dev, port, ®ion); | |
397 | region &= ~(size - 1); | |
398 | ||
399 | if (!region) | |
400 | return; | |
401 | ||
402 | res->name = pci_name(dev); | |
403 | res->flags = IORESOURCE_IO; | |
404 | ||
405 | /* Convert from PCI bus to resource space */ | |
406 | bus_region.start = region; | |
407 | bus_region.end = region + size - 1; | |
fc279850 | 408 | pcibios_bus_to_resource(dev->bus, res, &bus_region); |
65195c76 YL |
409 | |
410 | if (!pci_claim_resource(dev, nr)) | |
411 | dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name); | |
412 | } | |
1da177e4 LT |
413 | |
414 | /* | |
415 | * ATI Northbridge setups MCE the processor if you even | |
416 | * read somewhere between 0x3b0->0x3bb or read 0x3d3 | |
417 | */ | |
15856ad5 | 418 | static void quirk_ati_exploding_mce(struct pci_dev *dev) |
1da177e4 | 419 | { |
f0fda801 | 420 | dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); |
1da177e4 LT |
421 | /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ |
422 | request_region(0x3b0, 0x0C, "RadeonIGP"); | |
423 | request_region(0x3d3, 0x01, "RadeonIGP"); | |
424 | } | |
652c538e | 425 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce); |
1da177e4 | 426 | |
be6646bf HR |
427 | /* |
428 | * In the AMD NL platform, this device ([1022:7912]) has a class code of | |
429 | * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will | |
430 | * claim it. | |
431 | * But the dwc3 driver is a more specific driver for this device, and we'd | |
432 | * prefer to use it instead of xhci. To prevent xhci from claiming the | |
433 | * device, change the class code to 0x0c03fe, which the PCI r3.0 spec | |
434 | * defines as "USB device (not host controller)". The dwc3 driver can then | |
435 | * claim it based on its Vendor and Device ID. | |
436 | */ | |
437 | static void quirk_amd_nl_class(struct pci_dev *pdev) | |
438 | { | |
cd76d10b BH |
439 | u32 class = pdev->class; |
440 | ||
441 | /* Use "USB Device (not host controller)" class */ | |
7b78f48a | 442 | pdev->class = PCI_CLASS_SERIAL_USB_DEVICE; |
cd76d10b BH |
443 | dev_info(&pdev->dev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n", |
444 | class, pdev->class); | |
be6646bf HR |
445 | } |
446 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB, | |
447 | quirk_amd_nl_class); | |
448 | ||
1da177e4 LT |
449 | /* |
450 | * Let's make the southbridge information explicit instead | |
451 | * of having to worry about people probing the ACPI areas, | |
452 | * for example.. (Yes, it happens, and if you read the wrong | |
453 | * ACPI register it will put the machine to sleep with no | |
454 | * way of waking it up again. Bummer). | |
455 | * | |
456 | * ALI M7101: Two IO regions pointed to by words at | |
457 | * 0xE0 (64 bytes of ACPI registers) | |
458 | * 0xE2 (32 bytes of SMB registers) | |
459 | */ | |
15856ad5 | 460 | static void quirk_ali7101_acpi(struct pci_dev *dev) |
1da177e4 | 461 | { |
65195c76 YL |
462 | quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); |
463 | quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); | |
1da177e4 | 464 | } |
652c538e | 465 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi); |
1da177e4 | 466 | |
6693e74a LT |
467 | static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) |
468 | { | |
469 | u32 devres; | |
470 | u32 mask, size, base; | |
471 | ||
472 | pci_read_config_dword(dev, port, &devres); | |
473 | if ((devres & enable) != enable) | |
474 | return; | |
475 | mask = (devres >> 16) & 15; | |
476 | base = devres & 0xffff; | |
477 | size = 16; | |
478 | for (;;) { | |
479 | unsigned bit = size >> 1; | |
480 | if ((bit & mask) == bit) | |
481 | break; | |
482 | size = bit; | |
483 | } | |
484 | /* | |
485 | * For now we only print it out. Eventually we'll want to | |
486 | * reserve it (at least if it's in the 0x1000+ range), but | |
f7625980 | 487 | * let's get enough confirmation reports first. |
6693e74a LT |
488 | */ |
489 | base &= -size; | |
227f0647 RD |
490 | dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, |
491 | base + size - 1); | |
6693e74a LT |
492 | } |
493 | ||
494 | static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) | |
495 | { | |
496 | u32 devres; | |
497 | u32 mask, size, base; | |
498 | ||
499 | pci_read_config_dword(dev, port, &devres); | |
500 | if ((devres & enable) != enable) | |
501 | return; | |
502 | base = devres & 0xffff0000; | |
503 | mask = (devres & 0x3f) << 16; | |
504 | size = 128 << 16; | |
505 | for (;;) { | |
506 | unsigned bit = size >> 1; | |
507 | if ((bit & mask) == bit) | |
508 | break; | |
509 | size = bit; | |
510 | } | |
511 | /* | |
512 | * For now we only print it out. Eventually we'll want to | |
f7625980 | 513 | * reserve it, but let's get enough confirmation reports first. |
6693e74a LT |
514 | */ |
515 | base &= -size; | |
227f0647 RD |
516 | dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, |
517 | base + size - 1); | |
6693e74a LT |
518 | } |
519 | ||
1da177e4 LT |
520 | /* |
521 | * PIIX4 ACPI: Two IO regions pointed to by longwords at | |
522 | * 0x40 (64 bytes of ACPI registers) | |
08db2a70 | 523 | * 0x90 (16 bytes of SMB registers) |
6693e74a | 524 | * and a few strange programmable PIIX4 device resources. |
1da177e4 | 525 | */ |
15856ad5 | 526 | static void quirk_piix4_acpi(struct pci_dev *dev) |
1da177e4 | 527 | { |
65195c76 | 528 | u32 res_a; |
1da177e4 | 529 | |
65195c76 YL |
530 | quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); |
531 | quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); | |
6693e74a LT |
532 | |
533 | /* Device resource A has enables for some of the other ones */ | |
534 | pci_read_config_dword(dev, 0x5c, &res_a); | |
535 | ||
536 | piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); | |
537 | piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); | |
538 | ||
539 | /* Device resource D is just bitfields for static resources */ | |
540 | ||
541 | /* Device 12 enabled? */ | |
542 | if (res_a & (1 << 29)) { | |
543 | piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); | |
544 | piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); | |
545 | } | |
546 | /* Device 13 enabled? */ | |
547 | if (res_a & (1 << 30)) { | |
548 | piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); | |
549 | piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); | |
550 | } | |
551 | piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); | |
552 | piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); | |
1da177e4 | 553 | } |
652c538e AM |
554 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi); |
555 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi); | |
1da177e4 | 556 | |
cdb97558 JS |
557 | #define ICH_PMBASE 0x40 |
558 | #define ICH_ACPI_CNTL 0x44 | |
559 | #define ICH4_ACPI_EN 0x10 | |
560 | #define ICH6_ACPI_EN 0x80 | |
561 | #define ICH4_GPIOBASE 0x58 | |
562 | #define ICH4_GPIO_CNTL 0x5c | |
563 | #define ICH4_GPIO_EN 0x10 | |
564 | #define ICH6_GPIOBASE 0x48 | |
565 | #define ICH6_GPIO_CNTL 0x4c | |
566 | #define ICH6_GPIO_EN 0x10 | |
567 | ||
1da177e4 LT |
568 | /* |
569 | * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at | |
570 | * 0x40 (128 bytes of ACPI, GPIO & TCO registers) | |
571 | * 0x58 (64 bytes of GPIO I/O space) | |
572 | */ | |
15856ad5 | 573 | static void quirk_ich4_lpc_acpi(struct pci_dev *dev) |
1da177e4 | 574 | { |
cdb97558 | 575 | u8 enable; |
1da177e4 | 576 | |
87e3dc38 JS |
577 | /* |
578 | * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict | |
579 | * with low legacy (and fixed) ports. We don't know the decoding | |
580 | * priority and can't tell whether the legacy device or the one created | |
581 | * here is really at that address. This happens on boards with broken | |
582 | * BIOSes. | |
583 | */ | |
584 | ||
cdb97558 | 585 | pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); |
65195c76 YL |
586 | if (enable & ICH4_ACPI_EN) |
587 | quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, | |
588 | "ICH4 ACPI/GPIO/TCO"); | |
1da177e4 | 589 | |
cdb97558 | 590 | pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable); |
65195c76 YL |
591 | if (enable & ICH4_GPIO_EN) |
592 | quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, | |
593 | "ICH4 GPIO"); | |
1da177e4 | 594 | } |
652c538e AM |
595 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi); |
596 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi); | |
597 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi); | |
598 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi); | |
599 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi); | |
600 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi); | |
601 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi); | |
602 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi); | |
603 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); | |
604 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); | |
1da177e4 | 605 | |
15856ad5 | 606 | static void ich6_lpc_acpi_gpio(struct pci_dev *dev) |
2cea752f | 607 | { |
cdb97558 | 608 | u8 enable; |
2cea752f | 609 | |
cdb97558 | 610 | pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); |
65195c76 YL |
611 | if (enable & ICH6_ACPI_EN) |
612 | quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, | |
613 | "ICH6 ACPI/GPIO/TCO"); | |
2cea752f | 614 | |
cdb97558 | 615 | pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable); |
65195c76 YL |
616 | if (enable & ICH6_GPIO_EN) |
617 | quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, | |
618 | "ICH6 GPIO"); | |
2cea752f | 619 | } |
894886e5 | 620 | |
15856ad5 | 621 | static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) |
894886e5 LT |
622 | { |
623 | u32 val; | |
624 | u32 size, base; | |
625 | ||
626 | pci_read_config_dword(dev, reg, &val); | |
627 | ||
628 | /* Enabled? */ | |
629 | if (!(val & 1)) | |
630 | return; | |
631 | base = val & 0xfffc; | |
632 | if (dynsize) { | |
633 | /* | |
634 | * This is not correct. It is 16, 32 or 64 bytes depending on | |
635 | * register D31:F0:ADh bits 5:4. | |
636 | * | |
637 | * But this gets us at least _part_ of it. | |
638 | */ | |
639 | size = 16; | |
640 | } else { | |
641 | size = 128; | |
642 | } | |
643 | base &= ~(size-1); | |
644 | ||
645 | /* Just print it out for now. We should reserve it after more debugging */ | |
646 | dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); | |
647 | } | |
648 | ||
15856ad5 | 649 | static void quirk_ich6_lpc(struct pci_dev *dev) |
894886e5 LT |
650 | { |
651 | /* Shared ACPI/GPIO decode with all ICH6+ */ | |
652 | ich6_lpc_acpi_gpio(dev); | |
653 | ||
654 | /* ICH6-specific generic IO decode */ | |
655 | ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0); | |
656 | ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1); | |
657 | } | |
658 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); | |
659 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); | |
660 | ||
15856ad5 | 661 | static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) |
894886e5 LT |
662 | { |
663 | u32 val; | |
664 | u32 mask, base; | |
665 | ||
666 | pci_read_config_dword(dev, reg, &val); | |
667 | ||
668 | /* Enabled? */ | |
669 | if (!(val & 1)) | |
670 | return; | |
671 | ||
672 | /* | |
673 | * IO base in bits 15:2, mask in bits 23:18, both | |
674 | * are dword-based | |
675 | */ | |
676 | base = val & 0xfffc; | |
677 | mask = (val >> 16) & 0xfc; | |
678 | mask |= 3; | |
679 | ||
680 | /* Just print it out for now. We should reserve it after more debugging */ | |
681 | dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); | |
682 | } | |
683 | ||
684 | /* ICH7-10 has the same common LPC generic IO decode registers */ | |
15856ad5 | 685 | static void quirk_ich7_lpc(struct pci_dev *dev) |
894886e5 | 686 | { |
5d9c0a79 | 687 | /* We share the common ACPI/GPIO decode with ICH6 */ |
894886e5 LT |
688 | ich6_lpc_acpi_gpio(dev); |
689 | ||
690 | /* And have 4 ICH7+ generic decodes */ | |
691 | ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1"); | |
692 | ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2"); | |
693 | ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3"); | |
694 | ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4"); | |
695 | } | |
696 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc); | |
697 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc); | |
698 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc); | |
699 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc); | |
700 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc); | |
701 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc); | |
702 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc); | |
703 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc); | |
704 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc); | |
705 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc); | |
706 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc); | |
707 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc); | |
708 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc); | |
2cea752f | 709 | |
1da177e4 LT |
710 | /* |
711 | * VIA ACPI: One IO region pointed to by longword at | |
712 | * 0x48 or 0x20 (256 bytes of ACPI registers) | |
713 | */ | |
15856ad5 | 714 | static void quirk_vt82c586_acpi(struct pci_dev *dev) |
1da177e4 | 715 | { |
65195c76 YL |
716 | if (dev->revision & 0x10) |
717 | quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES, | |
718 | "vt82c586 ACPI"); | |
1da177e4 | 719 | } |
652c538e | 720 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi); |
1da177e4 LT |
721 | |
722 | /* | |
723 | * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at | |
724 | * 0x48 (256 bytes of ACPI registers) | |
725 | * 0x70 (128 bytes of hardware monitoring register) | |
726 | * 0x90 (16 bytes of SMB registers) | |
727 | */ | |
15856ad5 | 728 | static void quirk_vt82c686_acpi(struct pci_dev *dev) |
1da177e4 | 729 | { |
1da177e4 LT |
730 | quirk_vt82c586_acpi(dev); |
731 | ||
65195c76 YL |
732 | quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1, |
733 | "vt82c686 HW-mon"); | |
1da177e4 | 734 | |
65195c76 | 735 | quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB"); |
1da177e4 | 736 | } |
652c538e | 737 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi); |
1da177e4 | 738 | |
6d85f29b IK |
739 | /* |
740 | * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at | |
741 | * 0x88 (128 bytes of power management registers) | |
742 | * 0xd0 (16 bytes of SMB registers) | |
743 | */ | |
15856ad5 | 744 | static void quirk_vt8235_acpi(struct pci_dev *dev) |
6d85f29b | 745 | { |
65195c76 YL |
746 | quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); |
747 | quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB"); | |
6d85f29b IK |
748 | } |
749 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); | |
750 | ||
1f56f4a2 GB |
751 | /* |
752 | * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: | |
753 | * Disable fast back-to-back on the secondary bus segment | |
754 | */ | |
15856ad5 | 755 | static void quirk_xio2000a(struct pci_dev *dev) |
1f56f4a2 GB |
756 | { |
757 | struct pci_dev *pdev; | |
758 | u16 command; | |
759 | ||
227f0647 | 760 | dev_warn(&dev->dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n"); |
1f56f4a2 GB |
761 | list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { |
762 | pci_read_config_word(pdev, PCI_COMMAND, &command); | |
763 | if (command & PCI_COMMAND_FAST_BACK) | |
764 | pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); | |
765 | } | |
766 | } | |
767 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, | |
768 | quirk_xio2000a); | |
1da177e4 | 769 | |
f7625980 | 770 | #ifdef CONFIG_X86_IO_APIC |
1da177e4 LT |
771 | |
772 | #include <asm/io_apic.h> | |
773 | ||
774 | /* | |
775 | * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip | |
776 | * devices to the external APIC. | |
777 | * | |
778 | * TODO: When we have device-specific interrupt routers, | |
779 | * this code will go away from quirks. | |
780 | */ | |
1597cacb | 781 | static void quirk_via_ioapic(struct pci_dev *dev) |
1da177e4 LT |
782 | { |
783 | u8 tmp; | |
f7625980 | 784 | |
1da177e4 LT |
785 | if (nr_ioapics < 1) |
786 | tmp = 0; /* nothing routed to external APIC */ | |
787 | else | |
788 | tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ | |
f7625980 | 789 | |
f0fda801 | 790 | dev_info(&dev->dev, "%sbling VIA external APIC routing\n", |
1da177e4 LT |
791 | tmp == 0 ? "Disa" : "Ena"); |
792 | ||
793 | /* Offset 0x58: External APIC IRQ output control */ | |
3c78bc61 | 794 | pci_write_config_byte(dev, 0x58, tmp); |
1da177e4 | 795 | } |
652c538e | 796 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); |
e1a2a51e | 797 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); |
1da177e4 | 798 | |
a1740913 | 799 | /* |
f7625980 | 800 | * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit. |
a1740913 KW |
801 | * This leads to doubled level interrupt rates. |
802 | * Set this bit to get rid of cycle wastage. | |
803 | * Otherwise uncritical. | |
804 | */ | |
1597cacb | 805 | static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) |
a1740913 KW |
806 | { |
807 | u8 misc_control2; | |
808 | #define BYPASS_APIC_DEASSERT 8 | |
809 | ||
810 | pci_read_config_byte(dev, 0x5B, &misc_control2); | |
811 | if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { | |
f0fda801 | 812 | dev_info(&dev->dev, "Bypassing VIA 8237 APIC De-Assert Message\n"); |
a1740913 KW |
813 | pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); |
814 | } | |
815 | } | |
816 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); | |
e1a2a51e | 817 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); |
a1740913 | 818 | |
1da177e4 LT |
819 | /* |
820 | * The AMD io apic can hang the box when an apic irq is masked. | |
821 | * We check all revs >= B0 (yet not in the pre production!) as the bug | |
822 | * is currently marked NoFix | |
823 | * | |
824 | * We have multiple reports of hangs with this chipset that went away with | |
236561e5 | 825 | * noapic specified. For the moment we assume it's the erratum. We may be wrong |
1da177e4 LT |
826 | * of course. However the advice is demonstrably good even if so.. |
827 | */ | |
15856ad5 | 828 | static void quirk_amd_ioapic(struct pci_dev *dev) |
1da177e4 | 829 | { |
44c10138 | 830 | if (dev->revision >= 0x02) { |
f0fda801 | 831 | dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); |
832 | dev_warn(&dev->dev, " : booting with the \"noapic\" option\n"); | |
1da177e4 LT |
833 | } |
834 | } | |
652c538e | 835 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); |
1da177e4 LT |
836 | #endif /* CONFIG_X86_IO_APIC */ |
837 | ||
0bec9057 | 838 | #if defined(CONFIG_ARM64) && defined(CONFIG_PCI_ATS) |
21b5b8ee AJ |
839 | |
840 | static void quirk_cavium_sriov_rnm_link(struct pci_dev *dev) | |
841 | { | |
842 | /* Fix for improper SRIOV configuration on Cavium cn88xx RNM device */ | |
843 | if (dev->subsystem_device == 0xa118) | |
844 | dev->sriov->link = dev->devfn; | |
845 | } | |
846 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CAVIUM, 0xa018, quirk_cavium_sriov_rnm_link); | |
847 | #endif | |
848 | ||
d556ad4b PO |
849 | /* |
850 | * Some settings of MMRBC can lead to data corruption so block changes. | |
851 | * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide | |
852 | */ | |
15856ad5 | 853 | static void quirk_amd_8131_mmrbc(struct pci_dev *dev) |
d556ad4b | 854 | { |
aa288d4d | 855 | if (dev->subordinate && dev->revision <= 0x12) { |
227f0647 RD |
856 | dev_info(&dev->dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n", |
857 | dev->revision); | |
d556ad4b PO |
858 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; |
859 | } | |
860 | } | |
861 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); | |
1da177e4 | 862 | |
1da177e4 LT |
863 | /* |
864 | * FIXME: it is questionable that quirk_via_acpi | |
865 | * is needed. It shows up as an ISA bridge, and does not | |
866 | * support the PCI_INTERRUPT_LINE register at all. Therefore | |
867 | * it seems like setting the pci_dev's 'irq' to the | |
868 | * value of the ACPI SCI interrupt is only done for convenience. | |
869 | * -jgarzik | |
870 | */ | |
15856ad5 | 871 | static void quirk_via_acpi(struct pci_dev *d) |
1da177e4 LT |
872 | { |
873 | /* | |
874 | * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 | |
875 | */ | |
876 | u8 irq; | |
877 | pci_read_config_byte(d, 0x42, &irq); | |
878 | irq &= 0xf; | |
879 | if (irq && (irq != 2)) | |
880 | d->irq = irq; | |
881 | } | |
652c538e AM |
882 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi); |
883 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi); | |
1da177e4 | 884 | |
09d6029f DD |
885 | |
886 | /* | |
1597cacb | 887 | * VIA bridges which have VLink |
09d6029f | 888 | */ |
1597cacb | 889 | |
c06bb5d4 JD |
890 | static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18; |
891 | ||
892 | static void quirk_via_bridge(struct pci_dev *dev) | |
893 | { | |
894 | /* See what bridge we have and find the device ranges */ | |
895 | switch (dev->device) { | |
896 | case PCI_DEVICE_ID_VIA_82C686: | |
cb7468ef JD |
897 | /* The VT82C686 is special, it attaches to PCI and can have |
898 | any device number. All its subdevices are functions of | |
899 | that single device. */ | |
900 | via_vlink_dev_lo = PCI_SLOT(dev->devfn); | |
901 | via_vlink_dev_hi = PCI_SLOT(dev->devfn); | |
c06bb5d4 JD |
902 | break; |
903 | case PCI_DEVICE_ID_VIA_8237: | |
904 | case PCI_DEVICE_ID_VIA_8237A: | |
905 | via_vlink_dev_lo = 15; | |
906 | break; | |
907 | case PCI_DEVICE_ID_VIA_8235: | |
908 | via_vlink_dev_lo = 16; | |
909 | break; | |
910 | case PCI_DEVICE_ID_VIA_8231: | |
911 | case PCI_DEVICE_ID_VIA_8233_0: | |
912 | case PCI_DEVICE_ID_VIA_8233A: | |
913 | case PCI_DEVICE_ID_VIA_8233C_0: | |
914 | via_vlink_dev_lo = 17; | |
915 | break; | |
916 | } | |
917 | } | |
918 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge); | |
919 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge); | |
920 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge); | |
921 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge); | |
922 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge); | |
923 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge); | |
924 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge); | |
925 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge); | |
09d6029f | 926 | |
1597cacb AC |
927 | /** |
928 | * quirk_via_vlink - VIA VLink IRQ number update | |
929 | * @dev: PCI device | |
930 | * | |
931 | * If the device we are dealing with is on a PIC IRQ we need to | |
932 | * ensure that the IRQ line register which usually is not relevant | |
933 | * for PCI cards, is actually written so that interrupts get sent | |
c06bb5d4 JD |
934 | * to the right place. |
935 | * We only do this on systems where a VIA south bridge was detected, | |
936 | * and only for VIA devices on the motherboard (see quirk_via_bridge | |
937 | * above). | |
1597cacb AC |
938 | */ |
939 | ||
940 | static void quirk_via_vlink(struct pci_dev *dev) | |
25be5e6c LB |
941 | { |
942 | u8 irq, new_irq; | |
943 | ||
c06bb5d4 JD |
944 | /* Check if we have VLink at all */ |
945 | if (via_vlink_dev_lo == -1) | |
09d6029f DD |
946 | return; |
947 | ||
948 | new_irq = dev->irq; | |
949 | ||
950 | /* Don't quirk interrupts outside the legacy IRQ range */ | |
951 | if (!new_irq || new_irq > 15) | |
952 | return; | |
953 | ||
1597cacb | 954 | /* Internal device ? */ |
c06bb5d4 JD |
955 | if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi || |
956 | PCI_SLOT(dev->devfn) < via_vlink_dev_lo) | |
1597cacb AC |
957 | return; |
958 | ||
959 | /* This is an internal VLink device on a PIC interrupt. The BIOS | |
960 | ought to have set this but may not have, so we redo it */ | |
961 | ||
25be5e6c LB |
962 | pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); |
963 | if (new_irq != irq) { | |
f0fda801 | 964 | dev_info(&dev->dev, "VIA VLink IRQ fixup, from %d to %d\n", |
965 | irq, new_irq); | |
25be5e6c LB |
966 | udelay(15); /* unknown if delay really needed */ |
967 | pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); | |
968 | } | |
969 | } | |
1597cacb | 970 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); |
25be5e6c | 971 | |
1da177e4 LT |
972 | /* |
973 | * VIA VT82C598 has its device ID settable and many BIOSes | |
974 | * set it to the ID of VT82C597 for backward compatibility. | |
975 | * We need to switch it off to be able to recognize the real | |
976 | * type of the chip. | |
977 | */ | |
15856ad5 | 978 | static void quirk_vt82c598_id(struct pci_dev *dev) |
1da177e4 LT |
979 | { |
980 | pci_write_config_byte(dev, 0xfc, 0); | |
981 | pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); | |
982 | } | |
652c538e | 983 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id); |
1da177e4 LT |
984 | |
985 | /* | |
986 | * CardBus controllers have a legacy base address that enables them | |
987 | * to respond as i82365 pcmcia controllers. We don't want them to | |
988 | * do this even if the Linux CardBus driver is not loaded, because | |
989 | * the Linux i82365 driver does not (and should not) handle CardBus. | |
990 | */ | |
1597cacb | 991 | static void quirk_cardbus_legacy(struct pci_dev *dev) |
1da177e4 | 992 | { |
1da177e4 LT |
993 | pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); |
994 | } | |
ae9de56b YL |
995 | DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, |
996 | PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); | |
997 | DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, | |
998 | PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); | |
1da177e4 LT |
999 | |
1000 | /* | |
1001 | * Following the PCI ordering rules is optional on the AMD762. I'm not | |
1002 | * sure what the designers were smoking but let's not inhale... | |
1003 | * | |
1004 | * To be fair to AMD, it follows the spec by default, its BIOS people | |
1005 | * who turn it off! | |
1006 | */ | |
1597cacb | 1007 | static void quirk_amd_ordering(struct pci_dev *dev) |
1da177e4 LT |
1008 | { |
1009 | u32 pcic; | |
1010 | pci_read_config_dword(dev, 0x4C, &pcic); | |
3c78bc61 | 1011 | if ((pcic & 6) != 6) { |
1da177e4 | 1012 | pcic |= 6; |
f0fda801 | 1013 | dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n"); |
1da177e4 LT |
1014 | pci_write_config_dword(dev, 0x4C, pcic); |
1015 | pci_read_config_dword(dev, 0x84, &pcic); | |
3c78bc61 | 1016 | pcic |= (1 << 23); /* Required in this mode */ |
1da177e4 LT |
1017 | pci_write_config_dword(dev, 0x84, pcic); |
1018 | } | |
1019 | } | |
652c538e | 1020 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); |
e1a2a51e | 1021 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); |
1da177e4 LT |
1022 | |
1023 | /* | |
1024 | * DreamWorks provided workaround for Dunord I-3000 problem | |
1025 | * | |
1026 | * This card decodes and responds to addresses not apparently | |
1027 | * assigned to it. We force a larger allocation to ensure that | |
1028 | * nothing gets put too close to it. | |
1029 | */ | |
15856ad5 | 1030 | static void quirk_dunord(struct pci_dev *dev) |
1da177e4 | 1031 | { |
3c78bc61 | 1032 | struct resource *r = &dev->resource[1]; |
bd064f0a BH |
1033 | |
1034 | r->flags |= IORESOURCE_UNSET; | |
1da177e4 LT |
1035 | r->start = 0; |
1036 | r->end = 0xffffff; | |
1037 | } | |
652c538e | 1038 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord); |
1da177e4 LT |
1039 | |
1040 | /* | |
1041 | * i82380FB mobile docking controller: its PCI-to-PCI bridge | |
1042 | * is subtractive decoding (transparent), and does indicate this | |
1043 | * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 | |
1044 | * instead of 0x01. | |
1045 | */ | |
15856ad5 | 1046 | static void quirk_transparent_bridge(struct pci_dev *dev) |
1da177e4 LT |
1047 | { |
1048 | dev->transparent = 1; | |
1049 | } | |
652c538e AM |
1050 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); |
1051 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); | |
1da177e4 LT |
1052 | |
1053 | /* | |
1054 | * Common misconfiguration of the MediaGX/Geode PCI master that will | |
1055 | * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 | |
631dd1a8 | 1056 | * datasheets found at http://www.national.com/analog for info on what |
1da177e4 LT |
1057 | * these bits do. <christer@weinigel.se> |
1058 | */ | |
1597cacb | 1059 | static void quirk_mediagx_master(struct pci_dev *dev) |
1da177e4 LT |
1060 | { |
1061 | u8 reg; | |
3c78bc61 | 1062 | |
1da177e4 LT |
1063 | pci_read_config_byte(dev, 0x41, ®); |
1064 | if (reg & 2) { | |
1065 | reg &= ~2; | |
227f0647 RD |
1066 | dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", |
1067 | reg); | |
3c78bc61 | 1068 | pci_write_config_byte(dev, 0x41, reg); |
1da177e4 LT |
1069 | } |
1070 | } | |
652c538e AM |
1071 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); |
1072 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); | |
1da177e4 | 1073 | |
1da177e4 LT |
1074 | /* |
1075 | * Ensure C0 rev restreaming is off. This is normally done by | |
1076 | * the BIOS but in the odd case it is not the results are corruption | |
1077 | * hence the presence of a Linux check | |
1078 | */ | |
1597cacb | 1079 | static void quirk_disable_pxb(struct pci_dev *pdev) |
1da177e4 LT |
1080 | { |
1081 | u16 config; | |
f7625980 | 1082 | |
44c10138 | 1083 | if (pdev->revision != 0x04) /* Only C0 requires this */ |
1da177e4 LT |
1084 | return; |
1085 | pci_read_config_word(pdev, 0x40, &config); | |
1086 | if (config & (1<<6)) { | |
1087 | config &= ~(1<<6); | |
1088 | pci_write_config_word(pdev, 0x40, config); | |
f0fda801 | 1089 | dev_info(&pdev->dev, "C0 revision 450NX. Disabling PCI restreaming\n"); |
1da177e4 LT |
1090 | } |
1091 | } | |
652c538e | 1092 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); |
e1a2a51e | 1093 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); |
1da177e4 | 1094 | |
25e742b2 | 1095 | static void quirk_amd_ide_mode(struct pci_dev *pdev) |
ab17443a | 1096 | { |
5deab536 | 1097 | /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */ |
05a7d22b | 1098 | u8 tmp; |
ab17443a | 1099 | |
05a7d22b CC |
1100 | pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); |
1101 | if (tmp == 0x01) { | |
ab17443a CH |
1102 | pci_read_config_byte(pdev, 0x40, &tmp); |
1103 | pci_write_config_byte(pdev, 0x40, tmp|1); | |
1104 | pci_write_config_byte(pdev, 0x9, 1); | |
1105 | pci_write_config_byte(pdev, 0xa, 6); | |
1106 | pci_write_config_byte(pdev, 0x40, tmp); | |
1107 | ||
c9f89475 | 1108 | pdev->class = PCI_CLASS_STORAGE_SATA_AHCI; |
05a7d22b | 1109 | dev_info(&pdev->dev, "set SATA to AHCI mode\n"); |
ab17443a CH |
1110 | } |
1111 | } | |
05a7d22b | 1112 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); |
e1a2a51e | 1113 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); |
05a7d22b | 1114 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); |
e1a2a51e | 1115 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); |
5deab536 SH |
1116 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); |
1117 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); | |
fafe5c3d SH |
1118 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); |
1119 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); | |
ab17443a | 1120 | |
1da177e4 LT |
1121 | /* |
1122 | * Serverworks CSB5 IDE does not fully support native mode | |
1123 | */ | |
15856ad5 | 1124 | static void quirk_svwks_csb5ide(struct pci_dev *pdev) |
1da177e4 LT |
1125 | { |
1126 | u8 prog; | |
1127 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
1128 | if (prog & 5) { | |
1129 | prog &= ~5; | |
1130 | pdev->class &= ~5; | |
1131 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); | |
368c73d4 | 1132 | /* PCI layer will sort out resources */ |
1da177e4 LT |
1133 | } |
1134 | } | |
652c538e | 1135 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide); |
1da177e4 LT |
1136 | |
1137 | /* | |
1138 | * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same | |
1139 | */ | |
15856ad5 | 1140 | static void quirk_ide_samemode(struct pci_dev *pdev) |
1da177e4 LT |
1141 | { |
1142 | u8 prog; | |
1143 | ||
1144 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); | |
1145 | ||
1146 | if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { | |
f0fda801 | 1147 | dev_info(&pdev->dev, "IDE mode mismatch; forcing legacy mode\n"); |
1da177e4 LT |
1148 | prog &= ~5; |
1149 | pdev->class &= ~5; | |
1150 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); | |
1da177e4 LT |
1151 | } |
1152 | } | |
368c73d4 | 1153 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); |
1da177e4 | 1154 | |
979b1791 AC |
1155 | /* |
1156 | * Some ATA devices break if put into D3 | |
1157 | */ | |
1158 | ||
15856ad5 | 1159 | static void quirk_no_ata_d3(struct pci_dev *pdev) |
979b1791 | 1160 | { |
faa738bb | 1161 | pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; |
979b1791 | 1162 | } |
faa738bb YL |
1163 | /* Quirk the legacy ATA devices only. The AHCI ones are ok */ |
1164 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, | |
1165 | PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); | |
1166 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, | |
1167 | PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); | |
7a661c6f | 1168 | /* ALi loses some register settings that we cannot then restore */ |
faa738bb YL |
1169 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, |
1170 | PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); | |
7a661c6f AC |
1171 | /* VIA comes back fine but we need to keep it alive or ACPI GTM failures |
1172 | occur when mode detecting */ | |
faa738bb YL |
1173 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, |
1174 | PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); | |
979b1791 | 1175 | |
1da177e4 LT |
1176 | /* This was originally an Alpha specific thing, but it really fits here. |
1177 | * The i82375 PCI/EISA bridge appears as non-classified. Fix that. | |
1178 | */ | |
15856ad5 | 1179 | static void quirk_eisa_bridge(struct pci_dev *dev) |
1da177e4 LT |
1180 | { |
1181 | dev->class = PCI_CLASS_BRIDGE_EISA << 8; | |
1182 | } | |
652c538e | 1183 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge); |
1da177e4 | 1184 | |
7daa0c4f | 1185 | |
1da177e4 LT |
1186 | /* |
1187 | * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge | |
1188 | * is not activated. The myth is that Asus said that they do not want the | |
1189 | * users to be irritated by just another PCI Device in the Win98 device | |
f7625980 | 1190 | * manager. (see the file prog/hotplug/README.p4b in the lm_sensors |
1da177e4 LT |
1191 | * package 2.7.0 for details) |
1192 | * | |
f7625980 BH |
1193 | * The SMBus PCI Device can be activated by setting a bit in the ICH LPC |
1194 | * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it | |
d7698edc | 1195 | * becomes necessary to do this tweak in two steps -- the chosen trigger |
1196 | * is either the Host bridge (preferred) or on-board VGA controller. | |
9208ee82 JD |
1197 | * |
1198 | * Note that we used to unhide the SMBus that way on Toshiba laptops | |
1199 | * (Satellite A40 and Tecra M2) but then found that the thermal management | |
1200 | * was done by SMM code, which could cause unsynchronized concurrent | |
1201 | * accesses to the SMBus registers, with potentially bad effects. Thus you | |
1202 | * should be very careful when adding new entries: if SMM is accessing the | |
1203 | * Intel SMBus, this is a very good reason to leave it hidden. | |
a99acc83 JD |
1204 | * |
1205 | * Likewise, many recent laptops use ACPI for thermal management. If the | |
1206 | * ACPI DSDT code accesses the SMBus, then Linux should not access it | |
1207 | * natively, and keeping the SMBus hidden is the right thing to do. If you | |
1208 | * are about to add an entry in the table below, please first disassemble | |
1209 | * the DSDT and double-check that there is no code accessing the SMBus. | |
1da177e4 | 1210 | */ |
9d24a81e | 1211 | static int asus_hides_smbus; |
1da177e4 | 1212 | |
15856ad5 | 1213 | static void asus_hides_smbus_hostbridge(struct pci_dev *dev) |
1da177e4 LT |
1214 | { |
1215 | if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { | |
1216 | if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) | |
3c78bc61 | 1217 | switch (dev->subsystem_device) { |
a00db371 | 1218 | case 0x8025: /* P4B-LX */ |
1da177e4 LT |
1219 | case 0x8070: /* P4B */ |
1220 | case 0x8088: /* P4B533 */ | |
1221 | case 0x1626: /* L3C notebook */ | |
1222 | asus_hides_smbus = 1; | |
1223 | } | |
2f2d39d2 | 1224 | else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) |
3c78bc61 | 1225 | switch (dev->subsystem_device) { |
1da177e4 LT |
1226 | case 0x80b1: /* P4GE-V */ |
1227 | case 0x80b2: /* P4PE */ | |
1228 | case 0x8093: /* P4B533-V */ | |
1229 | asus_hides_smbus = 1; | |
1230 | } | |
2f2d39d2 | 1231 | else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) |
3c78bc61 | 1232 | switch (dev->subsystem_device) { |
1da177e4 LT |
1233 | case 0x8030: /* P4T533 */ |
1234 | asus_hides_smbus = 1; | |
1235 | } | |
2f2d39d2 | 1236 | else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) |
1da177e4 LT |
1237 | switch (dev->subsystem_device) { |
1238 | case 0x8070: /* P4G8X Deluxe */ | |
1239 | asus_hides_smbus = 1; | |
1240 | } | |
2f2d39d2 | 1241 | else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH) |
321311af JD |
1242 | switch (dev->subsystem_device) { |
1243 | case 0x80c9: /* PU-DLS */ | |
1244 | asus_hides_smbus = 1; | |
1245 | } | |
2f2d39d2 | 1246 | else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) |
1da177e4 LT |
1247 | switch (dev->subsystem_device) { |
1248 | case 0x1751: /* M2N notebook */ | |
1249 | case 0x1821: /* M5N notebook */ | |
4096ed0f | 1250 | case 0x1897: /* A6L notebook */ |
1da177e4 LT |
1251 | asus_hides_smbus = 1; |
1252 | } | |
2f2d39d2 | 1253 | else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
1da177e4 LT |
1254 | switch (dev->subsystem_device) { |
1255 | case 0x184b: /* W1N notebook */ | |
1256 | case 0x186a: /* M6Ne notebook */ | |
1257 | asus_hides_smbus = 1; | |
1258 | } | |
2f2d39d2 | 1259 | else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) |
2e45785c JD |
1260 | switch (dev->subsystem_device) { |
1261 | case 0x80f2: /* P4P800-X */ | |
1262 | asus_hides_smbus = 1; | |
1263 | } | |
2f2d39d2 | 1264 | else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) |
acc06632 RM |
1265 | switch (dev->subsystem_device) { |
1266 | case 0x1882: /* M6V notebook */ | |
2d1e1c75 | 1267 | case 0x1977: /* A6VA notebook */ |
acc06632 RM |
1268 | asus_hides_smbus = 1; |
1269 | } | |
1da177e4 LT |
1270 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { |
1271 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
3c78bc61 | 1272 | switch (dev->subsystem_device) { |
1da177e4 LT |
1273 | case 0x088C: /* HP Compaq nc8000 */ |
1274 | case 0x0890: /* HP Compaq nc6000 */ | |
1275 | asus_hides_smbus = 1; | |
1276 | } | |
2f2d39d2 | 1277 | else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) |
1da177e4 LT |
1278 | switch (dev->subsystem_device) { |
1279 | case 0x12bc: /* HP D330L */ | |
e3b1bd57 | 1280 | case 0x12bd: /* HP D530 */ |
74c57428 | 1281 | case 0x006a: /* HP Compaq nx9500 */ |
1da177e4 LT |
1282 | asus_hides_smbus = 1; |
1283 | } | |
677cc644 JD |
1284 | else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) |
1285 | switch (dev->subsystem_device) { | |
1286 | case 0x12bf: /* HP xw4100 */ | |
1287 | asus_hides_smbus = 1; | |
1288 | } | |
3c78bc61 RD |
1289 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { |
1290 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
1291 | switch (dev->subsystem_device) { | |
1292 | case 0xC00C: /* Samsung P35 notebook */ | |
1293 | asus_hides_smbus = 1; | |
1294 | } | |
c87f883e RIZ |
1295 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { |
1296 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) | |
3c78bc61 | 1297 | switch (dev->subsystem_device) { |
c87f883e RIZ |
1298 | case 0x0058: /* Compaq Evo N620c */ |
1299 | asus_hides_smbus = 1; | |
1300 | } | |
d7698edc | 1301 | else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) |
3c78bc61 | 1302 | switch (dev->subsystem_device) { |
d7698edc | 1303 | case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ |
1304 | /* Motherboard doesn't have Host bridge | |
1305 | * subvendor/subdevice IDs, therefore checking | |
1306 | * its on-board VGA controller */ | |
1307 | asus_hides_smbus = 1; | |
1308 | } | |
8293b0f6 | 1309 | else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2) |
3c78bc61 | 1310 | switch (dev->subsystem_device) { |
10260d9a JD |
1311 | case 0x00b8: /* Compaq Evo D510 CMT */ |
1312 | case 0x00b9: /* Compaq Evo D510 SFF */ | |
6b5096e4 | 1313 | case 0x00ba: /* Compaq Evo D510 USDT */ |
8293b0f6 DS |
1314 | /* Motherboard doesn't have Host bridge |
1315 | * subvendor/subdevice IDs and on-board VGA | |
1316 | * controller is disabled if an AGP card is | |
1317 | * inserted, therefore checking USB UHCI | |
1318 | * Controller #1 */ | |
10260d9a JD |
1319 | asus_hides_smbus = 1; |
1320 | } | |
27e46859 KH |
1321 | else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) |
1322 | switch (dev->subsystem_device) { | |
1323 | case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ | |
1324 | /* Motherboard doesn't have host bridge | |
1325 | * subvendor/subdevice IDs, therefore checking | |
1326 | * its on-board VGA controller */ | |
1327 | asus_hides_smbus = 1; | |
1328 | } | |
1da177e4 LT |
1329 | } |
1330 | } | |
652c538e AM |
1331 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); |
1332 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge); | |
1333 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge); | |
1334 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge); | |
677cc644 | 1335 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge); |
652c538e AM |
1336 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge); |
1337 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge); | |
1338 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge); | |
1339 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge); | |
1340 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); | |
1341 | ||
1342 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); | |
8293b0f6 | 1343 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge); |
27e46859 | 1344 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); |
d7698edc | 1345 | |
1597cacb | 1346 | static void asus_hides_smbus_lpc(struct pci_dev *dev) |
1da177e4 LT |
1347 | { |
1348 | u16 val; | |
f7625980 | 1349 | |
1da177e4 LT |
1350 | if (likely(!asus_hides_smbus)) |
1351 | return; | |
1352 | ||
1353 | pci_read_config_word(dev, 0xF2, &val); | |
1354 | if (val & 0x8) { | |
1355 | pci_write_config_word(dev, 0xF2, val & (~0x8)); | |
1356 | pci_read_config_word(dev, 0xF2, &val); | |
1357 | if (val & 0x8) | |
227f0647 RD |
1358 | dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", |
1359 | val); | |
1da177e4 | 1360 | else |
f0fda801 | 1361 | dev_info(&dev->dev, "Enabled i801 SMBus device\n"); |
1da177e4 LT |
1362 | } |
1363 | } | |
652c538e AM |
1364 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); |
1365 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); | |
1366 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); | |
1367 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); | |
1368 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); | |
1369 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); | |
1370 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); | |
e1a2a51e RW |
1371 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); |
1372 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); | |
1373 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); | |
1374 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); | |
1375 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); | |
1376 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); | |
1377 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); | |
1597cacb | 1378 | |
e1a2a51e RW |
1379 | /* It appears we just have one such device. If not, we have a warning */ |
1380 | static void __iomem *asus_rcba_base; | |
1381 | static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) | |
acc06632 | 1382 | { |
e1a2a51e | 1383 | u32 rcba; |
acc06632 RM |
1384 | |
1385 | if (likely(!asus_hides_smbus)) | |
1386 | return; | |
e1a2a51e RW |
1387 | WARN_ON(asus_rcba_base); |
1388 | ||
acc06632 | 1389 | pci_read_config_dword(dev, 0xF0, &rcba); |
e1a2a51e RW |
1390 | /* use bits 31:14, 16 kB aligned */ |
1391 | asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); | |
1392 | if (asus_rcba_base == NULL) | |
1393 | return; | |
1394 | } | |
1395 | ||
1396 | static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) | |
1397 | { | |
1398 | u32 val; | |
1399 | ||
1400 | if (likely(!asus_hides_smbus || !asus_rcba_base)) | |
1401 | return; | |
1402 | /* read the Function Disable register, dword mode only */ | |
1403 | val = readl(asus_rcba_base + 0x3418); | |
1404 | writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */ | |
1405 | } | |
1406 | ||
1407 | static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) | |
1408 | { | |
1409 | if (likely(!asus_hides_smbus || !asus_rcba_base)) | |
1410 | return; | |
1411 | iounmap(asus_rcba_base); | |
1412 | asus_rcba_base = NULL; | |
f0fda801 | 1413 | dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n"); |
acc06632 | 1414 | } |
e1a2a51e RW |
1415 | |
1416 | static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) | |
1417 | { | |
1418 | asus_hides_smbus_lpc_ich6_suspend(dev); | |
1419 | asus_hides_smbus_lpc_ich6_resume_early(dev); | |
1420 | asus_hides_smbus_lpc_ich6_resume(dev); | |
1421 | } | |
652c538e | 1422 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); |
e1a2a51e RW |
1423 | DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); |
1424 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); | |
1425 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); | |
ce007ea5 | 1426 | |
1da177e4 LT |
1427 | /* |
1428 | * SiS 96x south bridge: BIOS typically hides SMBus device... | |
1429 | */ | |
1597cacb | 1430 | static void quirk_sis_96x_smbus(struct pci_dev *dev) |
1da177e4 LT |
1431 | { |
1432 | u8 val = 0; | |
1da177e4 | 1433 | pci_read_config_byte(dev, 0x77, &val); |
2f5c33b3 | 1434 | if (val & 0x10) { |
f0fda801 | 1435 | dev_info(&dev->dev, "Enabling SiS 96x SMBus\n"); |
2f5c33b3 MH |
1436 | pci_write_config_byte(dev, 0x77, val & ~0x10); |
1437 | } | |
1da177e4 | 1438 | } |
652c538e AM |
1439 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); |
1440 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); | |
1441 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); | |
1442 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); | |
e1a2a51e RW |
1443 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); |
1444 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); | |
1445 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); | |
1446 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); | |
1da177e4 | 1447 | |
1da177e4 LT |
1448 | /* |
1449 | * ... This is further complicated by the fact that some SiS96x south | |
1450 | * bridges pretend to be 85C503/5513 instead. In that case see if we | |
1451 | * spotted a compatible north bridge to make sure. | |
1452 | * (pci_find_device doesn't work yet) | |
1453 | * | |
1454 | * We can also enable the sis96x bit in the discovery register.. | |
1455 | */ | |
1da177e4 LT |
1456 | #define SIS_DETECT_REGISTER 0x40 |
1457 | ||
1597cacb | 1458 | static void quirk_sis_503(struct pci_dev *dev) |
1da177e4 LT |
1459 | { |
1460 | u8 reg; | |
1461 | u16 devid; | |
1462 | ||
1463 | pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); | |
1464 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); | |
1465 | pci_read_config_word(dev, PCI_DEVICE_ID, &devid); | |
1466 | if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { | |
1467 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); | |
1468 | return; | |
1469 | } | |
1470 | ||
1da177e4 | 1471 | /* |
2f5c33b3 MH |
1472 | * Ok, it now shows up as a 96x.. run the 96x quirk by |
1473 | * hand in case it has already been processed. | |
1474 | * (depends on link order, which is apparently not guaranteed) | |
1da177e4 LT |
1475 | */ |
1476 | dev->device = devid; | |
2f5c33b3 | 1477 | quirk_sis_96x_smbus(dev); |
1da177e4 | 1478 | } |
652c538e | 1479 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); |
e1a2a51e | 1480 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); |
1da177e4 | 1481 | |
1da177e4 | 1482 | |
e5548e96 BJD |
1483 | /* |
1484 | * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller | |
1485 | * and MC97 modem controller are disabled when a second PCI soundcard is | |
1486 | * present. This patch, tweaking the VT8237 ISA bridge, enables them. | |
1487 | * -- bjd | |
1488 | */ | |
1597cacb | 1489 | static void asus_hides_ac97_lpc(struct pci_dev *dev) |
e5548e96 BJD |
1490 | { |
1491 | u8 val; | |
1492 | int asus_hides_ac97 = 0; | |
1493 | ||
1494 | if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { | |
1495 | if (dev->device == PCI_DEVICE_ID_VIA_8237) | |
1496 | asus_hides_ac97 = 1; | |
1497 | } | |
1498 | ||
1499 | if (!asus_hides_ac97) | |
1500 | return; | |
1501 | ||
1502 | pci_read_config_byte(dev, 0x50, &val); | |
1503 | if (val & 0xc0) { | |
1504 | pci_write_config_byte(dev, 0x50, val & (~0xc0)); | |
1505 | pci_read_config_byte(dev, 0x50, &val); | |
1506 | if (val & 0xc0) | |
227f0647 RD |
1507 | dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", |
1508 | val); | |
e5548e96 | 1509 | else |
f0fda801 | 1510 | dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n"); |
e5548e96 BJD |
1511 | } |
1512 | } | |
652c538e | 1513 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); |
e1a2a51e | 1514 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); |
1597cacb | 1515 | |
77967052 | 1516 | #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) |
15e0c694 AC |
1517 | |
1518 | /* | |
1519 | * If we are using libata we can drive this chip properly but must | |
1520 | * do this early on to make the additional device appear during | |
1521 | * the PCI scanning. | |
1522 | */ | |
5ee2ae7f | 1523 | static void quirk_jmicron_ata(struct pci_dev *pdev) |
15e0c694 | 1524 | { |
e34bb370 | 1525 | u32 conf1, conf5, class; |
15e0c694 AC |
1526 | u8 hdr; |
1527 | ||
1528 | /* Only poke fn 0 */ | |
1529 | if (PCI_FUNC(pdev->devfn)) | |
1530 | return; | |
1531 | ||
5ee2ae7f TH |
1532 | pci_read_config_dword(pdev, 0x40, &conf1); |
1533 | pci_read_config_dword(pdev, 0x80, &conf5); | |
15e0c694 | 1534 | |
5ee2ae7f TH |
1535 | conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ |
1536 | conf5 &= ~(1 << 24); /* Clear bit 24 */ | |
1537 | ||
1538 | switch (pdev->device) { | |
4daedcfe TH |
1539 | case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ |
1540 | case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ | |
5b6ae5ba | 1541 | case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */ |
5ee2ae7f TH |
1542 | /* The controller should be in single function ahci mode */ |
1543 | conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ | |
1544 | break; | |
1545 | ||
1546 | case PCI_DEVICE_ID_JMICRON_JMB365: | |
1547 | case PCI_DEVICE_ID_JMICRON_JMB366: | |
1548 | /* Redirect IDE second PATA port to the right spot */ | |
1549 | conf5 |= (1 << 24); | |
1550 | /* Fall through */ | |
1551 | case PCI_DEVICE_ID_JMICRON_JMB361: | |
1552 | case PCI_DEVICE_ID_JMICRON_JMB363: | |
5b6ae5ba | 1553 | case PCI_DEVICE_ID_JMICRON_JMB369: |
5ee2ae7f TH |
1554 | /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ |
1555 | /* Set the class codes correctly and then direct IDE 0 */ | |
3a9e3a51 | 1556 | conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ |
5ee2ae7f TH |
1557 | break; |
1558 | ||
1559 | case PCI_DEVICE_ID_JMICRON_JMB368: | |
1560 | /* The controller should be in single function IDE mode */ | |
1561 | conf1 |= 0x00C00000; /* Set 22, 23 */ | |
1562 | break; | |
15e0c694 | 1563 | } |
5ee2ae7f TH |
1564 | |
1565 | pci_write_config_dword(pdev, 0x40, conf1); | |
1566 | pci_write_config_dword(pdev, 0x80, conf5); | |
1567 | ||
1568 | /* Update pdev accordingly */ | |
1569 | pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); | |
1570 | pdev->hdr_type = hdr & 0x7f; | |
1571 | pdev->multifunction = !!(hdr & 0x80); | |
e34bb370 TH |
1572 | |
1573 | pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class); | |
1574 | pdev->class = class >> 8; | |
15e0c694 | 1575 | } |
5ee2ae7f TH |
1576 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); |
1577 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); | |
4daedcfe | 1578 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); |
5ee2ae7f | 1579 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); |
5b6ae5ba | 1580 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); |
5ee2ae7f TH |
1581 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); |
1582 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); | |
1583 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); | |
5b6ae5ba | 1584 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); |
e1a2a51e RW |
1585 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); |
1586 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); | |
4daedcfe | 1587 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); |
e1a2a51e | 1588 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); |
5b6ae5ba | 1589 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); |
e1a2a51e RW |
1590 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); |
1591 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); | |
1592 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); | |
5b6ae5ba | 1593 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); |
15e0c694 AC |
1594 | |
1595 | #endif | |
1596 | ||
91f15fb3 ZR |
1597 | static void quirk_jmicron_async_suspend(struct pci_dev *dev) |
1598 | { | |
1599 | if (dev->multifunction) { | |
1600 | device_disable_async_suspend(&dev->dev); | |
1601 | dev_info(&dev->dev, "async suspend disabled to avoid multi-function power-on ordering issue\n"); | |
1602 | } | |
1603 | } | |
1604 | DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend); | |
1605 | DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend); | |
1606 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend); | |
1607 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend); | |
1608 | ||
1da177e4 | 1609 | #ifdef CONFIG_X86_IO_APIC |
15856ad5 | 1610 | static void quirk_alder_ioapic(struct pci_dev *pdev) |
1da177e4 LT |
1611 | { |
1612 | int i; | |
1613 | ||
1614 | if ((pdev->class >> 8) != 0xff00) | |
1615 | return; | |
1616 | ||
1617 | /* the first BAR is the location of the IO APIC...we must | |
1618 | * not touch this (and it's already covered by the fixmap), so | |
1619 | * forcibly insert it into the resource tree */ | |
1620 | if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) | |
1621 | insert_resource(&iomem_resource, &pdev->resource[0]); | |
1622 | ||
1623 | /* The next five BARs all seem to be rubbish, so just clean | |
1624 | * them out */ | |
3c78bc61 | 1625 | for (i = 1; i < 6; i++) |
1da177e4 | 1626 | memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); |
1da177e4 | 1627 | } |
652c538e | 1628 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); |
1da177e4 LT |
1629 | #endif |
1630 | ||
15856ad5 | 1631 | static void quirk_pcie_mch(struct pci_dev *pdev) |
1da177e4 | 1632 | { |
0ba379ec | 1633 | pdev->no_msi = 1; |
1da177e4 | 1634 | } |
652c538e AM |
1635 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch); |
1636 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch); | |
1637 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch); | |
72f2ff0d | 1638 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, quirk_pcie_mch); |
1da177e4 | 1639 | |
4602b88d KA |
1640 | |
1641 | /* | |
1642 | * It's possible for the MSI to get corrupted if shpc and acpi | |
1643 | * are used together on certain PXH-based systems. | |
1644 | */ | |
15856ad5 | 1645 | static void quirk_pcie_pxh(struct pci_dev *dev) |
4602b88d | 1646 | { |
4602b88d | 1647 | dev->no_msi = 1; |
f0fda801 | 1648 | dev_warn(&dev->dev, "PXH quirk detected; SHPC device MSI disabled\n"); |
4602b88d KA |
1649 | } |
1650 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); | |
1651 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); | |
1652 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); | |
1653 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); | |
1654 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); | |
1655 | ||
ffadcc2f KCA |
1656 | /* |
1657 | * Some Intel PCI Express chipsets have trouble with downstream | |
1658 | * device power management. | |
1659 | */ | |
3c78bc61 | 1660 | static void quirk_intel_pcie_pm(struct pci_dev *dev) |
ffadcc2f KCA |
1661 | { |
1662 | pci_pm_d3_delay = 120; | |
1663 | dev->no_d1d2 = 1; | |
1664 | } | |
1665 | ||
1666 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); | |
1667 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); | |
1668 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); | |
1669 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); | |
1670 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); | |
1671 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); | |
1672 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); | |
1673 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); | |
1674 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); | |
1675 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); | |
1676 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); | |
1677 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); | |
1678 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); | |
1679 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); | |
1680 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); | |
1681 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); | |
1682 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); | |
1683 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); | |
1684 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); | |
1685 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); | |
1686 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); | |
4602b88d | 1687 | |
5938628c BH |
1688 | static void quirk_radeon_pm(struct pci_dev *dev) |
1689 | { | |
1690 | if (dev->subsystem_vendor == PCI_VENDOR_ID_APPLE && | |
1691 | dev->subsystem_device == 0x00e2) { | |
1692 | if (dev->d3_delay < 20) { | |
1693 | dev->d3_delay = 20; | |
1694 | dev_info(&dev->dev, "extending delay after power-on from D3 to %d msec\n", | |
1695 | dev->d3_delay); | |
1696 | } | |
1697 | } | |
1698 | } | |
1699 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6741, quirk_radeon_pm); | |
1700 | ||
426b3b8d | 1701 | #ifdef CONFIG_X86_IO_APIC |
c4e649b0 SA |
1702 | static int dmi_disable_ioapicreroute(const struct dmi_system_id *d) |
1703 | { | |
1704 | noioapicreroute = 1; | |
1705 | pr_info("%s detected: disable boot interrupt reroute\n", d->ident); | |
1706 | ||
1707 | return 0; | |
1708 | } | |
1709 | ||
6faadbbb | 1710 | static const struct dmi_system_id boot_interrupt_dmi_table[] = { |
c4e649b0 SA |
1711 | /* |
1712 | * Systems to exclude from boot interrupt reroute quirks | |
1713 | */ | |
1714 | { | |
1715 | .callback = dmi_disable_ioapicreroute, | |
1716 | .ident = "ASUSTek Computer INC. M2N-LR", | |
1717 | .matches = { | |
1718 | DMI_MATCH(DMI_SYS_VENDOR, "ASUSTek Computer INC."), | |
1719 | DMI_MATCH(DMI_PRODUCT_NAME, "M2N-LR"), | |
1720 | }, | |
1721 | }, | |
1722 | {} | |
1723 | }; | |
1724 | ||
e1d3a908 SA |
1725 | /* |
1726 | * Boot interrupts on some chipsets cannot be turned off. For these chipsets, | |
1727 | * remap the original interrupt in the linux kernel to the boot interrupt, so | |
1728 | * that a PCI device's interrupt handler is installed on the boot interrupt | |
1729 | * line instead. | |
1730 | */ | |
1731 | static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) | |
1732 | { | |
c4e649b0 | 1733 | dmi_check_system(boot_interrupt_dmi_table); |
41b9eb26 | 1734 | if (noioapicquirk || noioapicreroute) |
e1d3a908 SA |
1735 | return; |
1736 | ||
1737 | dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; | |
fdcdaf6c BH |
1738 | dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n", |
1739 | dev->vendor, dev->device); | |
e1d3a908 | 1740 | } |
88d1dce3 OD |
1741 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); |
1742 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); | |
1743 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); | |
1744 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); | |
1745 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); | |
1746 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); | |
1747 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); | |
1748 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); | |
1749 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); | |
1750 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); | |
1751 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); | |
1752 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); | |
1753 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); | |
1754 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); | |
1755 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); | |
1756 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); | |
e1d3a908 | 1757 | |
426b3b8d SA |
1758 | /* |
1759 | * On some chipsets we can disable the generation of legacy INTx boot | |
1760 | * interrupts. | |
1761 | */ | |
1762 | ||
1763 | /* | |
1764 | * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no | |
1765 | * 300641-004US, section 5.7.3. | |
1766 | */ | |
1767 | #define INTEL_6300_IOAPIC_ABAR 0x40 | |
1768 | #define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) | |
1769 | ||
1770 | static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) | |
1771 | { | |
1772 | u16 pci_config_word; | |
1773 | ||
1774 | if (noioapicquirk) | |
1775 | return; | |
1776 | ||
1777 | pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); | |
1778 | pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; | |
1779 | pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); | |
1780 | ||
fdcdaf6c BH |
1781 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
1782 | dev->vendor, dev->device); | |
426b3b8d | 1783 | } |
f7625980 BH |
1784 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); |
1785 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); | |
77251188 OD |
1786 | |
1787 | /* | |
1788 | * disable boot interrupts on HT-1000 | |
1789 | */ | |
1790 | #define BC_HT1000_FEATURE_REG 0x64 | |
1791 | #define BC_HT1000_PIC_REGS_ENABLE (1<<0) | |
1792 | #define BC_HT1000_MAP_IDX 0xC00 | |
1793 | #define BC_HT1000_MAP_DATA 0xC01 | |
1794 | ||
1795 | static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) | |
1796 | { | |
1797 | u32 pci_config_dword; | |
1798 | u8 irq; | |
1799 | ||
1800 | if (noioapicquirk) | |
1801 | return; | |
1802 | ||
1803 | pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); | |
1804 | pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | | |
1805 | BC_HT1000_PIC_REGS_ENABLE); | |
1806 | ||
1807 | for (irq = 0x10; irq < 0x10 + 32; irq++) { | |
1808 | outb(irq, BC_HT1000_MAP_IDX); | |
1809 | outb(0x00, BC_HT1000_MAP_DATA); | |
1810 | } | |
1811 | ||
1812 | pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); | |
1813 | ||
fdcdaf6c BH |
1814 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
1815 | dev->vendor, dev->device); | |
77251188 | 1816 | } |
f7625980 BH |
1817 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); |
1818 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); | |
542622da OD |
1819 | |
1820 | /* | |
1821 | * disable boot interrupts on AMD and ATI chipsets | |
1822 | */ | |
1823 | /* | |
1824 | * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 | |
1825 | * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode | |
1826 | * (due to an erratum). | |
1827 | */ | |
1828 | #define AMD_813X_MISC 0x40 | |
1829 | #define AMD_813X_NOIOAMODE (1<<0) | |
4fd8bdc5 | 1830 | #define AMD_813X_REV_B1 0x12 |
bbe19443 | 1831 | #define AMD_813X_REV_B2 0x13 |
542622da OD |
1832 | |
1833 | static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) | |
1834 | { | |
1835 | u32 pci_config_dword; | |
1836 | ||
1837 | if (noioapicquirk) | |
1838 | return; | |
4fd8bdc5 SA |
1839 | if ((dev->revision == AMD_813X_REV_B1) || |
1840 | (dev->revision == AMD_813X_REV_B2)) | |
bbe19443 | 1841 | return; |
542622da OD |
1842 | |
1843 | pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); | |
1844 | pci_config_dword &= ~AMD_813X_NOIOAMODE; | |
1845 | pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); | |
1846 | ||
fdcdaf6c BH |
1847 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
1848 | dev->vendor, dev->device); | |
542622da | 1849 | } |
4fd8bdc5 SA |
1850 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); |
1851 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); | |
1852 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); | |
1853 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); | |
542622da OD |
1854 | |
1855 | #define AMD_8111_PCI_IRQ_ROUTING 0x56 | |
1856 | ||
1857 | static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) | |
1858 | { | |
1859 | u16 pci_config_word; | |
1860 | ||
1861 | if (noioapicquirk) | |
1862 | return; | |
1863 | ||
1864 | pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); | |
1865 | if (!pci_config_word) { | |
227f0647 RD |
1866 | dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] already disabled\n", |
1867 | dev->vendor, dev->device); | |
542622da OD |
1868 | return; |
1869 | } | |
1870 | pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); | |
fdcdaf6c BH |
1871 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
1872 | dev->vendor, dev->device); | |
542622da | 1873 | } |
f7625980 BH |
1874 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); |
1875 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); | |
426b3b8d SA |
1876 | #endif /* CONFIG_X86_IO_APIC */ |
1877 | ||
33dced2e SS |
1878 | /* |
1879 | * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size | |
1880 | * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. | |
1881 | * Re-allocate the region if needed... | |
1882 | */ | |
15856ad5 | 1883 | static void quirk_tc86c001_ide(struct pci_dev *dev) |
33dced2e SS |
1884 | { |
1885 | struct resource *r = &dev->resource[0]; | |
1886 | ||
1887 | if (r->start & 0x8) { | |
bd064f0a | 1888 | r->flags |= IORESOURCE_UNSET; |
33dced2e SS |
1889 | r->start = 0; |
1890 | r->end = 0xf; | |
1891 | } | |
1892 | } | |
1893 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, | |
1894 | PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, | |
1895 | quirk_tc86c001_ide); | |
1896 | ||
21c5fd97 IA |
1897 | /* |
1898 | * PLX PCI 9050 PCI Target bridge controller has an errata that prevents the | |
1899 | * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o) | |
1900 | * being read correctly if bit 7 of the base address is set. | |
1901 | * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128). | |
1902 | * Re-allocate the regions to a 256-byte boundary if necessary. | |
1903 | */ | |
193c0d68 | 1904 | static void quirk_plx_pci9050(struct pci_dev *dev) |
21c5fd97 IA |
1905 | { |
1906 | unsigned int bar; | |
1907 | ||
1908 | /* Fixed in revision 2 (PCI 9052). */ | |
1909 | if (dev->revision >= 2) | |
1910 | return; | |
1911 | for (bar = 0; bar <= 1; bar++) | |
1912 | if (pci_resource_len(dev, bar) == 0x80 && | |
1913 | (pci_resource_start(dev, bar) & 0x80)) { | |
1914 | struct resource *r = &dev->resource[bar]; | |
227f0647 | 1915 | dev_info(&dev->dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", |
21c5fd97 | 1916 | bar); |
bd064f0a | 1917 | r->flags |= IORESOURCE_UNSET; |
21c5fd97 IA |
1918 | r->start = 0; |
1919 | r->end = 0xff; | |
1920 | } | |
1921 | } | |
1922 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, | |
1923 | quirk_plx_pci9050); | |
2794bb28 IA |
1924 | /* |
1925 | * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others) | |
1926 | * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b, | |
1927 | * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c, | |
1928 | * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b. | |
1929 | * | |
1930 | * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq" | |
1931 | * driver. | |
1932 | */ | |
1933 | DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050); | |
1934 | DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050); | |
21c5fd97 | 1935 | |
15856ad5 | 1936 | static void quirk_netmos(struct pci_dev *dev) |
1da177e4 LT |
1937 | { |
1938 | unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; | |
1939 | unsigned int num_serial = dev->subsystem_device & 0xf; | |
1940 | ||
1941 | /* | |
1942 | * These Netmos parts are multiport serial devices with optional | |
1943 | * parallel ports. Even when parallel ports are present, they | |
1944 | * are identified as class SERIAL, which means the serial driver | |
1945 | * will claim them. To prevent this, mark them as class OTHER. | |
1946 | * These combo devices should be claimed by parport_serial. | |
1947 | * | |
1948 | * The subdevice ID is of the form 0x00PS, where <P> is the number | |
1949 | * of parallel ports and <S> is the number of serial ports. | |
1950 | */ | |
1951 | switch (dev->device) { | |
4c9c1686 JS |
1952 | case PCI_DEVICE_ID_NETMOS_9835: |
1953 | /* Well, this rule doesn't hold for the following 9835 device */ | |
1954 | if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && | |
1955 | dev->subsystem_device == 0x0299) | |
1956 | return; | |
1da177e4 LT |
1957 | case PCI_DEVICE_ID_NETMOS_9735: |
1958 | case PCI_DEVICE_ID_NETMOS_9745: | |
1da177e4 LT |
1959 | case PCI_DEVICE_ID_NETMOS_9845: |
1960 | case PCI_DEVICE_ID_NETMOS_9855: | |
08803efe | 1961 | if (num_parallel) { |
227f0647 | 1962 | dev_info(&dev->dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n", |
1da177e4 LT |
1963 | dev->device, num_parallel, num_serial); |
1964 | dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | | |
1965 | (dev->class & 0xff); | |
1966 | } | |
1967 | } | |
1968 | } | |
08803efe YL |
1969 | DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, |
1970 | PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); | |
1da177e4 | 1971 | |
da2d03ea AW |
1972 | /* |
1973 | * Quirk non-zero PCI functions to route VPD access through function 0 for | |
1974 | * devices that share VPD resources between functions. The functions are | |
1975 | * expected to be identical devices. | |
1976 | */ | |
7aa6ca4d MR |
1977 | static void quirk_f0_vpd_link(struct pci_dev *dev) |
1978 | { | |
da2d03ea AW |
1979 | struct pci_dev *f0; |
1980 | ||
1981 | if (!PCI_FUNC(dev->devfn)) | |
7aa6ca4d | 1982 | return; |
da2d03ea AW |
1983 | |
1984 | f0 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); | |
1985 | if (!f0) | |
1986 | return; | |
1987 | ||
1988 | if (f0->vpd && dev->class == f0->class && | |
1989 | dev->vendor == f0->vendor && dev->device == f0->device) | |
1990 | dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0; | |
1991 | ||
1992 | pci_dev_put(f0); | |
7aa6ca4d MR |
1993 | } |
1994 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, | |
1995 | PCI_CLASS_NETWORK_ETHERNET, 8, quirk_f0_vpd_link); | |
1996 | ||
15856ad5 | 1997 | static void quirk_e100_interrupt(struct pci_dev *dev) |
16a74744 | 1998 | { |
e64aeccb | 1999 | u16 command, pmcsr; |
16a74744 BH |
2000 | u8 __iomem *csr; |
2001 | u8 cmd_hi; | |
2002 | ||
2003 | switch (dev->device) { | |
2004 | /* PCI IDs taken from drivers/net/e100.c */ | |
2005 | case 0x1029: | |
2006 | case 0x1030 ... 0x1034: | |
2007 | case 0x1038 ... 0x103E: | |
2008 | case 0x1050 ... 0x1057: | |
2009 | case 0x1059: | |
2010 | case 0x1064 ... 0x106B: | |
2011 | case 0x1091 ... 0x1095: | |
2012 | case 0x1209: | |
2013 | case 0x1229: | |
2014 | case 0x2449: | |
2015 | case 0x2459: | |
2016 | case 0x245D: | |
2017 | case 0x27DC: | |
2018 | break; | |
2019 | default: | |
2020 | return; | |
2021 | } | |
2022 | ||
2023 | /* | |
2024 | * Some firmware hands off the e100 with interrupts enabled, | |
2025 | * which can cause a flood of interrupts if packets are | |
2026 | * received before the driver attaches to the device. So | |
2027 | * disable all e100 interrupts here. The driver will | |
2028 | * re-enable them when it's ready. | |
2029 | */ | |
2030 | pci_read_config_word(dev, PCI_COMMAND, &command); | |
16a74744 | 2031 | |
1bef7dc0 | 2032 | if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) |
16a74744 BH |
2033 | return; |
2034 | ||
e64aeccb IK |
2035 | /* |
2036 | * Check that the device is in the D0 power state. If it's not, | |
2037 | * there is no point to look any further. | |
2038 | */ | |
728cdb75 YW |
2039 | if (dev->pm_cap) { |
2040 | pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); | |
e64aeccb IK |
2041 | if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) |
2042 | return; | |
2043 | } | |
2044 | ||
1bef7dc0 BH |
2045 | /* Convert from PCI bus to resource space. */ |
2046 | csr = ioremap(pci_resource_start(dev, 0), 8); | |
16a74744 | 2047 | if (!csr) { |
f0fda801 | 2048 | dev_warn(&dev->dev, "Can't map e100 registers\n"); |
16a74744 BH |
2049 | return; |
2050 | } | |
2051 | ||
2052 | cmd_hi = readb(csr + 3); | |
2053 | if (cmd_hi == 0) { | |
227f0647 | 2054 | dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; disabling\n"); |
16a74744 BH |
2055 | writeb(1, csr + 3); |
2056 | } | |
2057 | ||
2058 | iounmap(csr); | |
2059 | } | |
4c5b28e2 YL |
2060 | DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, |
2061 | PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt); | |
a5312e28 | 2062 | |
649426ef AD |
2063 | /* |
2064 | * The 82575 and 82598 may experience data corruption issues when transitioning | |
96291d56 | 2065 | * out of L0S. To prevent this we need to disable L0S on the PCIe link. |
649426ef | 2066 | */ |
15856ad5 | 2067 | static void quirk_disable_aspm_l0s(struct pci_dev *dev) |
649426ef AD |
2068 | { |
2069 | dev_info(&dev->dev, "Disabling L0s\n"); | |
2070 | pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); | |
2071 | } | |
2072 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); | |
2073 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); | |
2074 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); | |
2075 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); | |
2076 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); | |
2077 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); | |
2078 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); | |
2079 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); | |
2080 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); | |
2081 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); | |
2082 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); | |
2083 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); | |
2084 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); | |
2085 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); | |
2086 | ||
15856ad5 | 2087 | static void fixup_rev1_53c810(struct pci_dev *dev) |
a5312e28 | 2088 | { |
e6323e3c BH |
2089 | u32 class = dev->class; |
2090 | ||
2091 | /* | |
2092 | * rev 1 ncr53c810 chips don't set the class at all which means | |
a5312e28 IK |
2093 | * they don't get their resources remapped. Fix that here. |
2094 | */ | |
e6323e3c BH |
2095 | if (class) |
2096 | return; | |
a5312e28 | 2097 | |
e6323e3c BH |
2098 | dev->class = PCI_CLASS_STORAGE_SCSI << 8; |
2099 | dev_info(&dev->dev, "NCR 53c810 rev 1 PCI class overridden (%#08x -> %#08x)\n", | |
2100 | class, dev->class); | |
a5312e28 IK |
2101 | } |
2102 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); | |
2103 | ||
9d265124 | 2104 | /* Enable 1k I/O space granularity on the Intel P64H2 */ |
15856ad5 | 2105 | static void quirk_p64h2_1k_io(struct pci_dev *dev) |
9d265124 DY |
2106 | { |
2107 | u16 en1k; | |
9d265124 DY |
2108 | |
2109 | pci_read_config_word(dev, 0x40, &en1k); | |
2110 | ||
2111 | if (en1k & 0x200) { | |
f0fda801 | 2112 | dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n"); |
2b28ae19 | 2113 | dev->io_window_1k = 1; |
9d265124 DY |
2114 | } |
2115 | } | |
2116 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); | |
2117 | ||
cf34a8e0 BG |
2118 | /* Under some circumstances, AER is not linked with extended capabilities. |
2119 | * Force it to be linked by setting the corresponding control bit in the | |
2120 | * config space. | |
2121 | */ | |
1597cacb | 2122 | static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) |
cf34a8e0 BG |
2123 | { |
2124 | uint8_t b; | |
2125 | if (pci_read_config_byte(dev, 0xf41, &b) == 0) { | |
2126 | if (!(b & 0x20)) { | |
2127 | pci_write_config_byte(dev, 0xf41, b | 0x20); | |
227f0647 | 2128 | dev_info(&dev->dev, "Linking AER extended capability\n"); |
cf34a8e0 BG |
2129 | } |
2130 | } | |
2131 | } | |
2132 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, | |
2133 | quirk_nvidia_ck804_pcie_aer_ext_cap); | |
e1a2a51e | 2134 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, |
1597cacb | 2135 | quirk_nvidia_ck804_pcie_aer_ext_cap); |
cf34a8e0 | 2136 | |
15856ad5 | 2137 | static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) |
53a9bf42 TY |
2138 | { |
2139 | /* | |
2140 | * Disable PCI Bus Parking and PCI Master read caching on CX700 | |
2141 | * which causes unspecified timing errors with a VT6212L on the PCI | |
ca846392 TY |
2142 | * bus leading to USB2.0 packet loss. |
2143 | * | |
2144 | * This quirk is only enabled if a second (on the external PCI bus) | |
2145 | * VT6212L is found -- the CX700 core itself also contains a USB | |
2146 | * host controller with the same PCI ID as the VT6212L. | |
53a9bf42 TY |
2147 | */ |
2148 | ||
ca846392 TY |
2149 | /* Count VT6212L instances */ |
2150 | struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA, | |
2151 | PCI_DEVICE_ID_VIA_8235_USB_2, NULL); | |
53a9bf42 | 2152 | uint8_t b; |
ca846392 TY |
2153 | |
2154 | /* p should contain the first (internal) VT6212L -- see if we have | |
2155 | an external one by searching again */ | |
2156 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); | |
2157 | if (!p) | |
2158 | return; | |
2159 | pci_dev_put(p); | |
2160 | ||
53a9bf42 TY |
2161 | if (pci_read_config_byte(dev, 0x76, &b) == 0) { |
2162 | if (b & 0x40) { | |
2163 | /* Turn off PCI Bus Parking */ | |
2164 | pci_write_config_byte(dev, 0x76, b ^ 0x40); | |
2165 | ||
227f0647 | 2166 | dev_info(&dev->dev, "Disabling VIA CX700 PCI parking\n"); |
bc043274 TY |
2167 | } |
2168 | } | |
2169 | ||
2170 | if (pci_read_config_byte(dev, 0x72, &b) == 0) { | |
2171 | if (b != 0) { | |
53a9bf42 TY |
2172 | /* Turn off PCI Master read caching */ |
2173 | pci_write_config_byte(dev, 0x72, 0x0); | |
bc043274 TY |
2174 | |
2175 | /* Set PCI Master Bus time-out to "1x16 PCLK" */ | |
53a9bf42 | 2176 | pci_write_config_byte(dev, 0x75, 0x1); |
bc043274 TY |
2177 | |
2178 | /* Disable "Read FIFO Timer" */ | |
53a9bf42 TY |
2179 | pci_write_config_byte(dev, 0x77, 0x0); |
2180 | ||
227f0647 | 2181 | dev_info(&dev->dev, "Disabling VIA CX700 PCI caching\n"); |
53a9bf42 TY |
2182 | } |
2183 | } | |
2184 | } | |
ca846392 | 2185 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); |
53a9bf42 | 2186 | |
7c20078a BM |
2187 | /* |
2188 | * If a device follows the VPD format spec, the PCI core will not read or | |
2189 | * write past the VPD End Tag. But some vendors do not follow the VPD | |
2190 | * format spec, so we can't tell how much data is safe to access. Devices | |
2191 | * may behave unpredictably if we access too much. Blacklist these devices | |
2192 | * so we don't touch VPD at all. | |
2193 | */ | |
2194 | static void quirk_blacklist_vpd(struct pci_dev *dev) | |
2195 | { | |
2196 | if (dev->vpd) { | |
2197 | dev->vpd->len = 0; | |
044bc425 | 2198 | dev_warn(&dev->dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n"); |
7c20078a BM |
2199 | } |
2200 | } | |
2201 | ||
2202 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd); | |
2203 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd); | |
2204 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd); | |
2205 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd); | |
2206 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd); | |
2207 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd); | |
2208 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd); | |
2209 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd); | |
2210 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd); | |
2211 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd); | |
2212 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd); | |
2213 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID, | |
2214 | quirk_blacklist_vpd); | |
0d5370d1 | 2215 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd); |
7c20078a | 2216 | |
99cb233d BL |
2217 | /* |
2218 | * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the | |
2219 | * VPD end tag will hang the device. This problem was initially | |
2220 | * observed when a vpd entry was created in sysfs | |
2221 | * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry | |
2222 | * will dump 32k of data. Reading a full 32k will cause an access | |
2223 | * beyond the VPD end tag causing the device to hang. Once the device | |
2224 | * is hung, the bnx2 driver will not be able to reset the device. | |
2225 | * We believe that it is legal to read beyond the end tag and | |
2226 | * therefore the solution is to limit the read/write length. | |
2227 | */ | |
15856ad5 | 2228 | static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev) |
99cb233d | 2229 | { |
9d82d8ea | 2230 | /* |
35405f25 DH |
2231 | * Only disable the VPD capability for 5706, 5706S, 5708, |
2232 | * 5708S and 5709 rev. A | |
9d82d8ea | 2233 | */ |
99cb233d | 2234 | if ((dev->device == PCI_DEVICE_ID_NX2_5706) || |
35405f25 | 2235 | (dev->device == PCI_DEVICE_ID_NX2_5706S) || |
99cb233d | 2236 | (dev->device == PCI_DEVICE_ID_NX2_5708) || |
9d82d8ea | 2237 | (dev->device == PCI_DEVICE_ID_NX2_5708S) || |
99cb233d BL |
2238 | ((dev->device == PCI_DEVICE_ID_NX2_5709) && |
2239 | (dev->revision & 0xf0) == 0x0)) { | |
2240 | if (dev->vpd) | |
2241 | dev->vpd->len = 0x80; | |
2242 | } | |
2243 | } | |
2244 | ||
bffadffd YZ |
2245 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
2246 | PCI_DEVICE_ID_NX2_5706, | |
2247 | quirk_brcm_570x_limit_vpd); | |
2248 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2249 | PCI_DEVICE_ID_NX2_5706S, | |
2250 | quirk_brcm_570x_limit_vpd); | |
2251 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2252 | PCI_DEVICE_ID_NX2_5708, | |
2253 | quirk_brcm_570x_limit_vpd); | |
2254 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2255 | PCI_DEVICE_ID_NX2_5708S, | |
2256 | quirk_brcm_570x_limit_vpd); | |
2257 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2258 | PCI_DEVICE_ID_NX2_5709, | |
2259 | quirk_brcm_570x_limit_vpd); | |
2260 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2261 | PCI_DEVICE_ID_NX2_5709S, | |
2262 | quirk_brcm_570x_limit_vpd); | |
99cb233d | 2263 | |
25e742b2 | 2264 | static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev) |
0b471506 MC |
2265 | { |
2266 | u32 rev; | |
2267 | ||
2268 | pci_read_config_dword(dev, 0xf4, &rev); | |
2269 | ||
2270 | /* Only CAP the MRRS if the device is a 5719 A0 */ | |
2271 | if (rev == 0x05719000) { | |
2272 | int readrq = pcie_get_readrq(dev); | |
2273 | if (readrq > 2048) | |
2274 | pcie_set_readrq(dev, 2048); | |
2275 | } | |
2276 | } | |
2277 | ||
2278 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, | |
2279 | PCI_DEVICE_ID_TIGON3_5719, | |
2280 | quirk_brcm_5719_limit_mrrs); | |
2281 | ||
ce709f86 JM |
2282 | #ifdef CONFIG_PCIE_IPROC_PLATFORM |
2283 | static void quirk_paxc_bridge(struct pci_dev *pdev) | |
2284 | { | |
2285 | /* The PCI config space is shared with the PAXC root port and the first | |
2286 | * Ethernet device. So, we need to workaround this by telling the PCI | |
2287 | * code that the bridge is not an Ethernet device. | |
2288 | */ | |
2289 | if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) | |
2290 | pdev->class = PCI_CLASS_BRIDGE_PCI << 8; | |
2291 | ||
2292 | /* MPSS is not being set properly (as it is currently 0). This is | |
2293 | * because that area of the PCI config space is hard coded to zero, and | |
2294 | * is not modifiable by firmware. Set this to 2 (e.g., 512 byte MPS) | |
2295 | * so that the MPS can be set to the real max value. | |
2296 | */ | |
2297 | pdev->pcie_mpss = 2; | |
2298 | } | |
2299 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge); | |
2300 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge); | |
2301 | #endif | |
2302 | ||
26c56dc0 MM |
2303 | /* Originally in EDAC sources for i82875P: |
2304 | * Intel tells BIOS developers to hide device 6 which | |
2305 | * configures the overflow device access containing | |
2306 | * the DRBs - this is where we expose device 6. | |
2307 | * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm | |
2308 | */ | |
15856ad5 | 2309 | static void quirk_unhide_mch_dev6(struct pci_dev *dev) |
26c56dc0 MM |
2310 | { |
2311 | u8 reg; | |
2312 | ||
2313 | if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) { | |
2314 | dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n"); | |
2315 | pci_write_config_byte(dev, 0xF4, reg | 0x02); | |
2316 | } | |
2317 | } | |
2318 | ||
2319 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, | |
2320 | quirk_unhide_mch_dev6); | |
2321 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, | |
2322 | quirk_unhide_mch_dev6); | |
2323 | ||
12962267 | 2324 | #ifdef CONFIG_TILEPRO |
f02cbbe6 | 2325 | /* |
12962267 | 2326 | * The Tilera TILEmpower tilepro platform needs to set the link speed |
f02cbbe6 CM |
2327 | * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed |
2328 | * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe | |
2329 | * capability register of the PEX8624 PCIe switch. The switch | |
2330 | * supports link speed auto negotiation, but falsely sets | |
2331 | * the link speed to 5GT/s. | |
2332 | */ | |
15856ad5 | 2333 | static void quirk_tile_plx_gen1(struct pci_dev *dev) |
f02cbbe6 CM |
2334 | { |
2335 | if (tile_plx_gen1) { | |
2336 | pci_write_config_dword(dev, 0x98, 0x1); | |
2337 | mdelay(50); | |
2338 | } | |
2339 | } | |
2340 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); | |
12962267 | 2341 | #endif /* CONFIG_TILEPRO */ |
26c56dc0 | 2342 | |
3f79e107 | 2343 | #ifdef CONFIG_PCI_MSI |
ebdf7d39 TH |
2344 | /* Some chipsets do not support MSI. We cannot easily rely on setting |
2345 | * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually | |
f7625980 BH |
2346 | * some other buses controlled by the chipset even if Linux is not |
2347 | * aware of it. Instead of setting the flag on all buses in the | |
ebdf7d39 | 2348 | * machine, simply disable MSI globally. |
3f79e107 | 2349 | */ |
15856ad5 | 2350 | static void quirk_disable_all_msi(struct pci_dev *dev) |
3f79e107 | 2351 | { |
88187dfa | 2352 | pci_no_msi(); |
f0fda801 | 2353 | dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n"); |
3f79e107 | 2354 | } |
ebdf7d39 TH |
2355 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); |
2356 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); | |
2357 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); | |
66d715c9 | 2358 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); |
184b812f | 2359 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); |
162dedd3 | 2360 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi); |
549e1561 | 2361 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi); |
10b4ad1a | 2362 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, 0x0761, quirk_disable_all_msi); |
3f79e107 BG |
2363 | |
2364 | /* Disable MSI on chipsets that are known to not support it */ | |
15856ad5 | 2365 | static void quirk_disable_msi(struct pci_dev *dev) |
3f79e107 BG |
2366 | { |
2367 | if (dev->subordinate) { | |
227f0647 | 2368 | dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); |
3f79e107 BG |
2369 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
2370 | } | |
2371 | } | |
2372 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); | |
134b3450 | 2373 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi); |
9313ff45 | 2374 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi); |
6397c75c | 2375 | |
aff61369 CL |
2376 | /* |
2377 | * The APC bridge device in AMD 780 family northbridges has some random | |
2378 | * OEM subsystem ID in its vendor ID register (erratum 18), so instead | |
2379 | * we use the possible vendor/device IDs of the host bridge for the | |
2380 | * declared quirk, and search for the APC bridge by slot number. | |
2381 | */ | |
15856ad5 | 2382 | static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge) |
aff61369 CL |
2383 | { |
2384 | struct pci_dev *apc_bridge; | |
2385 | ||
2386 | apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0)); | |
2387 | if (apc_bridge) { | |
2388 | if (apc_bridge->device == 0x9602) | |
2389 | quirk_disable_msi(apc_bridge); | |
2390 | pci_dev_put(apc_bridge); | |
2391 | } | |
2392 | } | |
2393 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi); | |
2394 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi); | |
2395 | ||
6397c75c BG |
2396 | /* Go through the list of Hypertransport capabilities and |
2397 | * return 1 if a HT MSI capability is found and enabled */ | |
25e742b2 | 2398 | static int msi_ht_cap_enabled(struct pci_dev *dev) |
6397c75c | 2399 | { |
fff905f3 | 2400 | int pos, ttl = PCI_FIND_CAP_TTL; |
7a380507 ME |
2401 | |
2402 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
2403 | while (pos && ttl--) { | |
2404 | u8 flags; | |
2405 | ||
2406 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
3c78bc61 | 2407 | &flags) == 0) { |
f0fda801 | 2408 | dev_info(&dev->dev, "Found %s HT MSI Mapping\n", |
7a380507 | 2409 | flags & HT_MSI_FLAGS_ENABLE ? |
f0fda801 | 2410 | "enabled" : "disabled"); |
7a380507 | 2411 | return (flags & HT_MSI_FLAGS_ENABLE) != 0; |
6397c75c | 2412 | } |
7a380507 ME |
2413 | |
2414 | pos = pci_find_next_ht_capability(dev, pos, | |
2415 | HT_CAPTYPE_MSI_MAPPING); | |
6397c75c BG |
2416 | } |
2417 | return 0; | |
2418 | } | |
2419 | ||
2420 | /* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ | |
25e742b2 | 2421 | static void quirk_msi_ht_cap(struct pci_dev *dev) |
6397c75c BG |
2422 | { |
2423 | if (dev->subordinate && !msi_ht_cap_enabled(dev)) { | |
227f0647 | 2424 | dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); |
6397c75c BG |
2425 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
2426 | } | |
2427 | } | |
2428 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, | |
2429 | quirk_msi_ht_cap); | |
6bae1d96 | 2430 | |
6397c75c BG |
2431 | /* The nVidia CK804 chipset may have 2 HT MSI mappings. |
2432 | * MSI are supported if the MSI capability set in any of these mappings. | |
2433 | */ | |
25e742b2 | 2434 | static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) |
6397c75c BG |
2435 | { |
2436 | struct pci_dev *pdev; | |
2437 | ||
2438 | if (!dev->subordinate) | |
2439 | return; | |
2440 | ||
2441 | /* check HT MSI cap on this chipset and the root one. | |
2442 | * a single one having MSI is enough to be sure that MSI are supported. | |
2443 | */ | |
11f242f0 | 2444 | pdev = pci_get_slot(dev->bus, 0); |
9ac0ce85 JJ |
2445 | if (!pdev) |
2446 | return; | |
0c875c28 | 2447 | if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { |
227f0647 | 2448 | dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); |
6397c75c BG |
2449 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
2450 | } | |
11f242f0 | 2451 | pci_dev_put(pdev); |
6397c75c BG |
2452 | } |
2453 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, | |
2454 | quirk_nvidia_ck804_msi_ht_cap); | |
ba698ad4 | 2455 | |
415b6d0e | 2456 | /* Force enable MSI mapping capability on HT bridges */ |
25e742b2 | 2457 | static void ht_enable_msi_mapping(struct pci_dev *dev) |
9dc625e7 | 2458 | { |
fff905f3 | 2459 | int pos, ttl = PCI_FIND_CAP_TTL; |
9dc625e7 PC |
2460 | |
2461 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
2462 | while (pos && ttl--) { | |
2463 | u8 flags; | |
2464 | ||
2465 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
2466 | &flags) == 0) { | |
2467 | dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); | |
2468 | ||
2469 | pci_write_config_byte(dev, pos + HT_MSI_FLAGS, | |
2470 | flags | HT_MSI_FLAGS_ENABLE); | |
2471 | } | |
2472 | pos = pci_find_next_ht_capability(dev, pos, | |
2473 | HT_CAPTYPE_MSI_MAPPING); | |
2474 | } | |
2475 | } | |
415b6d0e BH |
2476 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, |
2477 | PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, | |
2478 | ht_enable_msi_mapping); | |
9dc625e7 | 2479 | |
e0ae4f55 YL |
2480 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, |
2481 | ht_enable_msi_mapping); | |
2482 | ||
e4146bb9 | 2483 | /* The P5N32-SLI motherboards from Asus have a problem with msi |
75e07fc3 AP |
2484 | * for the MCP55 NIC. It is not yet determined whether the msi problem |
2485 | * also affects other devices. As for now, turn off msi for this device. | |
2486 | */ | |
15856ad5 | 2487 | static void nvenet_msi_disable(struct pci_dev *dev) |
75e07fc3 | 2488 | { |
9251bac9 JD |
2489 | const char *board_name = dmi_get_system_info(DMI_BOARD_NAME); |
2490 | ||
2491 | if (board_name && | |
2492 | (strstr(board_name, "P5N32-SLI PREMIUM") || | |
2493 | strstr(board_name, "P5N32-E SLI"))) { | |
227f0647 | 2494 | dev_info(&dev->dev, "Disabling msi for MCP55 NIC on P5N32-SLI\n"); |
75e07fc3 AP |
2495 | dev->no_msi = 1; |
2496 | } | |
2497 | } | |
2498 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, | |
2499 | PCI_DEVICE_ID_NVIDIA_NVENET_15, | |
2500 | nvenet_msi_disable); | |
2501 | ||
66db60ea | 2502 | /* |
f7625980 BH |
2503 | * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing |
2504 | * config register. This register controls the routing of legacy | |
2505 | * interrupts from devices that route through the MCP55. If this register | |
2506 | * is misprogrammed, interrupts are only sent to the BSP, unlike | |
2507 | * conventional systems where the IRQ is broadcast to all online CPUs. Not | |
2508 | * having this register set properly prevents kdump from booting up | |
2509 | * properly, so let's make sure that we have it set correctly. | |
2510 | * Note that this is an undocumented register. | |
66db60ea | 2511 | */ |
15856ad5 | 2512 | static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) |
66db60ea NH |
2513 | { |
2514 | u32 cfg; | |
2515 | ||
49c2fa08 NH |
2516 | if (!pci_find_capability(dev, PCI_CAP_ID_HT)) |
2517 | return; | |
2518 | ||
66db60ea NH |
2519 | pci_read_config_dword(dev, 0x74, &cfg); |
2520 | ||
2521 | if (cfg & ((1 << 2) | (1 << 15))) { | |
2522 | printk(KERN_INFO "Rewriting irq routing register on MCP55\n"); | |
2523 | cfg &= ~((1 << 2) | (1 << 15)); | |
2524 | pci_write_config_dword(dev, 0x74, cfg); | |
2525 | } | |
2526 | } | |
2527 | ||
2528 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, | |
2529 | PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0, | |
2530 | nvbridge_check_legacy_irq_routing); | |
2531 | ||
2532 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, | |
2533 | PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4, | |
2534 | nvbridge_check_legacy_irq_routing); | |
2535 | ||
25e742b2 | 2536 | static int ht_check_msi_mapping(struct pci_dev *dev) |
de745306 | 2537 | { |
fff905f3 | 2538 | int pos, ttl = PCI_FIND_CAP_TTL; |
de745306 YL |
2539 | int found = 0; |
2540 | ||
2541 | /* check if there is HT MSI cap or enabled on this device */ | |
2542 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
2543 | while (pos && ttl--) { | |
2544 | u8 flags; | |
2545 | ||
2546 | if (found < 1) | |
2547 | found = 1; | |
2548 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
2549 | &flags) == 0) { | |
2550 | if (flags & HT_MSI_FLAGS_ENABLE) { | |
2551 | if (found < 2) { | |
2552 | found = 2; | |
2553 | break; | |
2554 | } | |
2555 | } | |
2556 | } | |
2557 | pos = pci_find_next_ht_capability(dev, pos, | |
2558 | HT_CAPTYPE_MSI_MAPPING); | |
2559 | } | |
2560 | ||
2561 | return found; | |
2562 | } | |
2563 | ||
25e742b2 | 2564 | static int host_bridge_with_leaf(struct pci_dev *host_bridge) |
de745306 YL |
2565 | { |
2566 | struct pci_dev *dev; | |
2567 | int pos; | |
2568 | int i, dev_no; | |
2569 | int found = 0; | |
2570 | ||
2571 | dev_no = host_bridge->devfn >> 3; | |
2572 | for (i = dev_no + 1; i < 0x20; i++) { | |
2573 | dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0)); | |
2574 | if (!dev) | |
2575 | continue; | |
2576 | ||
2577 | /* found next host bridge ?*/ | |
2578 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); | |
2579 | if (pos != 0) { | |
2580 | pci_dev_put(dev); | |
2581 | break; | |
2582 | } | |
2583 | ||
2584 | if (ht_check_msi_mapping(dev)) { | |
2585 | found = 1; | |
2586 | pci_dev_put(dev); | |
2587 | break; | |
2588 | } | |
2589 | pci_dev_put(dev); | |
2590 | } | |
2591 | ||
2592 | return found; | |
2593 | } | |
2594 | ||
eeafda70 YL |
2595 | #define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */ |
2596 | #define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */ | |
2597 | ||
25e742b2 | 2598 | static int is_end_of_ht_chain(struct pci_dev *dev) |
eeafda70 YL |
2599 | { |
2600 | int pos, ctrl_off; | |
2601 | int end = 0; | |
2602 | u16 flags, ctrl; | |
2603 | ||
2604 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); | |
2605 | ||
2606 | if (!pos) | |
2607 | goto out; | |
2608 | ||
2609 | pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags); | |
2610 | ||
2611 | ctrl_off = ((flags >> 10) & 1) ? | |
2612 | PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1; | |
2613 | pci_read_config_word(dev, pos + ctrl_off, &ctrl); | |
2614 | ||
2615 | if (ctrl & (1 << 6)) | |
2616 | end = 1; | |
2617 | ||
2618 | out: | |
2619 | return end; | |
2620 | } | |
2621 | ||
25e742b2 | 2622 | static void nv_ht_enable_msi_mapping(struct pci_dev *dev) |
9dc625e7 PC |
2623 | { |
2624 | struct pci_dev *host_bridge; | |
1dec6b05 YL |
2625 | int pos; |
2626 | int i, dev_no; | |
2627 | int found = 0; | |
2628 | ||
2629 | dev_no = dev->devfn >> 3; | |
2630 | for (i = dev_no; i >= 0; i--) { | |
2631 | host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); | |
2632 | if (!host_bridge) | |
2633 | continue; | |
2634 | ||
2635 | pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); | |
2636 | if (pos != 0) { | |
2637 | found = 1; | |
2638 | break; | |
2639 | } | |
2640 | pci_dev_put(host_bridge); | |
2641 | } | |
2642 | ||
2643 | if (!found) | |
2644 | return; | |
2645 | ||
eeafda70 YL |
2646 | /* don't enable end_device/host_bridge with leaf directly here */ |
2647 | if (host_bridge == dev && is_end_of_ht_chain(host_bridge) && | |
2648 | host_bridge_with_leaf(host_bridge)) | |
de745306 YL |
2649 | goto out; |
2650 | ||
1dec6b05 YL |
2651 | /* root did that ! */ |
2652 | if (msi_ht_cap_enabled(host_bridge)) | |
2653 | goto out; | |
2654 | ||
2655 | ht_enable_msi_mapping(dev); | |
2656 | ||
2657 | out: | |
2658 | pci_dev_put(host_bridge); | |
2659 | } | |
2660 | ||
25e742b2 | 2661 | static void ht_disable_msi_mapping(struct pci_dev *dev) |
1dec6b05 | 2662 | { |
fff905f3 | 2663 | int pos, ttl = PCI_FIND_CAP_TTL; |
1dec6b05 YL |
2664 | |
2665 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); | |
2666 | while (pos && ttl--) { | |
2667 | u8 flags; | |
2668 | ||
2669 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, | |
2670 | &flags) == 0) { | |
6a958d5b | 2671 | dev_info(&dev->dev, "Disabling HT MSI Mapping\n"); |
1dec6b05 YL |
2672 | |
2673 | pci_write_config_byte(dev, pos + HT_MSI_FLAGS, | |
2674 | flags & ~HT_MSI_FLAGS_ENABLE); | |
2675 | } | |
2676 | pos = pci_find_next_ht_capability(dev, pos, | |
2677 | HT_CAPTYPE_MSI_MAPPING); | |
2678 | } | |
2679 | } | |
2680 | ||
25e742b2 | 2681 | static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all) |
1dec6b05 YL |
2682 | { |
2683 | struct pci_dev *host_bridge; | |
2684 | int pos; | |
2685 | int found; | |
2686 | ||
3d2a5318 RW |
2687 | if (!pci_msi_enabled()) |
2688 | return; | |
2689 | ||
1dec6b05 YL |
2690 | /* check if there is HT MSI cap or enabled on this device */ |
2691 | found = ht_check_msi_mapping(dev); | |
2692 | ||
2693 | /* no HT MSI CAP */ | |
2694 | if (found == 0) | |
2695 | return; | |
9dc625e7 PC |
2696 | |
2697 | /* | |
2698 | * HT MSI mapping should be disabled on devices that are below | |
2699 | * a non-Hypertransport host bridge. Locate the host bridge... | |
2700 | */ | |
2701 | host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); | |
2702 | if (host_bridge == NULL) { | |
227f0647 | 2703 | dev_warn(&dev->dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n"); |
9dc625e7 PC |
2704 | return; |
2705 | } | |
2706 | ||
2707 | pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); | |
2708 | if (pos != 0) { | |
2709 | /* Host bridge is to HT */ | |
1dec6b05 YL |
2710 | if (found == 1) { |
2711 | /* it is not enabled, try to enable it */ | |
de745306 YL |
2712 | if (all) |
2713 | ht_enable_msi_mapping(dev); | |
2714 | else | |
2715 | nv_ht_enable_msi_mapping(dev); | |
1dec6b05 | 2716 | } |
dff3aef7 | 2717 | goto out; |
9dc625e7 PC |
2718 | } |
2719 | ||
1dec6b05 YL |
2720 | /* HT MSI is not enabled */ |
2721 | if (found == 1) | |
dff3aef7 | 2722 | goto out; |
9dc625e7 | 2723 | |
1dec6b05 YL |
2724 | /* Host bridge is not to HT, disable HT MSI mapping on this device */ |
2725 | ht_disable_msi_mapping(dev); | |
dff3aef7 MS |
2726 | |
2727 | out: | |
2728 | pci_dev_put(host_bridge); | |
9dc625e7 | 2729 | } |
de745306 | 2730 | |
25e742b2 | 2731 | static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev) |
de745306 YL |
2732 | { |
2733 | return __nv_msi_ht_cap_quirk(dev, 1); | |
2734 | } | |
2735 | ||
25e742b2 | 2736 | static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) |
de745306 YL |
2737 | { |
2738 | return __nv_msi_ht_cap_quirk(dev, 0); | |
2739 | } | |
2740 | ||
2741 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); | |
6dab62ee | 2742 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); |
de745306 YL |
2743 | |
2744 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); | |
6dab62ee | 2745 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); |
9dc625e7 | 2746 | |
15856ad5 | 2747 | static void quirk_msi_intx_disable_bug(struct pci_dev *dev) |
ba698ad4 DM |
2748 | { |
2749 | dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; | |
2750 | } | |
15856ad5 | 2751 | static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) |
4600c9d7 SH |
2752 | { |
2753 | struct pci_dev *p; | |
2754 | ||
2755 | /* SB700 MSI issue will be fixed at HW level from revision A21, | |
2756 | * we need check PCI REVISION ID of SMBus controller to get SB700 | |
2757 | * revision. | |
2758 | */ | |
2759 | p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, | |
2760 | NULL); | |
2761 | if (!p) | |
2762 | return; | |
2763 | ||
2764 | if ((p->revision < 0x3B) && (p->revision >= 0x30)) | |
2765 | dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; | |
2766 | pci_dev_put(p); | |
2767 | } | |
70588818 XH |
2768 | static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev) |
2769 | { | |
2770 | /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */ | |
2771 | if (dev->revision < 0x18) { | |
2772 | dev_info(&dev->dev, "set MSI_INTX_DISABLE_BUG flag\n"); | |
2773 | dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; | |
2774 | } | |
2775 | } | |
ba698ad4 DM |
2776 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
2777 | PCI_DEVICE_ID_TIGON3_5780, | |
2778 | quirk_msi_intx_disable_bug); | |
2779 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2780 | PCI_DEVICE_ID_TIGON3_5780S, | |
2781 | quirk_msi_intx_disable_bug); | |
2782 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2783 | PCI_DEVICE_ID_TIGON3_5714, | |
2784 | quirk_msi_intx_disable_bug); | |
2785 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2786 | PCI_DEVICE_ID_TIGON3_5714S, | |
2787 | quirk_msi_intx_disable_bug); | |
2788 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2789 | PCI_DEVICE_ID_TIGON3_5715, | |
2790 | quirk_msi_intx_disable_bug); | |
2791 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | |
2792 | PCI_DEVICE_ID_TIGON3_5715S, | |
2793 | quirk_msi_intx_disable_bug); | |
2794 | ||
bc38b411 | 2795 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390, |
4600c9d7 | 2796 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2797 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391, |
4600c9d7 | 2798 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2799 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392, |
4600c9d7 | 2800 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2801 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393, |
4600c9d7 | 2802 | quirk_msi_intx_disable_ati_bug); |
bc38b411 | 2803 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394, |
4600c9d7 | 2804 | quirk_msi_intx_disable_ati_bug); |
bc38b411 DM |
2805 | |
2806 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373, | |
2807 | quirk_msi_intx_disable_bug); | |
2808 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, | |
2809 | quirk_msi_intx_disable_bug); | |
2810 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, | |
2811 | quirk_msi_intx_disable_bug); | |
2812 | ||
7cb6a291 HX |
2813 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062, |
2814 | quirk_msi_intx_disable_bug); | |
2815 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063, | |
2816 | quirk_msi_intx_disable_bug); | |
2817 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060, | |
2818 | quirk_msi_intx_disable_bug); | |
2819 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062, | |
2820 | quirk_msi_intx_disable_bug); | |
2821 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073, | |
2822 | quirk_msi_intx_disable_bug); | |
2823 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083, | |
2824 | quirk_msi_intx_disable_bug); | |
70588818 XH |
2825 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1090, |
2826 | quirk_msi_intx_disable_qca_bug); | |
2827 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1091, | |
2828 | quirk_msi_intx_disable_qca_bug); | |
2829 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a0, | |
2830 | quirk_msi_intx_disable_qca_bug); | |
2831 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, | |
2832 | quirk_msi_intx_disable_qca_bug); | |
2833 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, | |
2834 | quirk_msi_intx_disable_qca_bug); | |
3f79e107 | 2835 | #endif /* CONFIG_PCI_MSI */ |
3d137310 | 2836 | |
3322340a FR |
2837 | /* Allow manual resource allocation for PCI hotplug bridges |
2838 | * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For | |
2839 | * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6), | |
f7625980 | 2840 | * kernel fails to allocate resources when hotplug device is |
3322340a FR |
2841 | * inserted and PCI bus is rescanned. |
2842 | */ | |
15856ad5 | 2843 | static void quirk_hotplug_bridge(struct pci_dev *dev) |
3322340a FR |
2844 | { |
2845 | dev->is_hotplug_bridge = 1; | |
2846 | } | |
2847 | ||
2848 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge); | |
2849 | ||
03cd8f7e ML |
2850 | /* |
2851 | * This is a quirk for the Ricoh MMC controller found as a part of | |
2852 | * some mulifunction chips. | |
2853 | ||
25985edc | 2854 | * This is very similar and based on the ricoh_mmc driver written by |
03cd8f7e ML |
2855 | * Philip Langdale. Thank you for these magic sequences. |
2856 | * | |
2857 | * These chips implement the four main memory card controllers (SD, MMC, MS, xD) | |
2858 | * and one or both of cardbus or firewire. | |
2859 | * | |
2860 | * It happens that they implement SD and MMC | |
2861 | * support as separate controllers (and PCI functions). The linux SDHCI | |
2862 | * driver supports MMC cards but the chip detects MMC cards in hardware | |
2863 | * and directs them to the MMC controller - so the SDHCI driver never sees | |
2864 | * them. | |
2865 | * | |
2866 | * To get around this, we must disable the useless MMC controller. | |
2867 | * At that point, the SDHCI controller will start seeing them | |
2868 | * It seems to be the case that the relevant PCI registers to deactivate the | |
2869 | * MMC controller live on PCI function 0, which might be the cardbus controller | |
2870 | * or the firewire controller, depending on the particular chip in question | |
2871 | * | |
2872 | * This has to be done early, because as soon as we disable the MMC controller | |
2873 | * other pci functions shift up one level, e.g. function #2 becomes function | |
2874 | * #1, and this will confuse the pci core. | |
2875 | */ | |
2876 | ||
2877 | #ifdef CONFIG_MMC_RICOH_MMC | |
2878 | static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) | |
2879 | { | |
2880 | /* disable via cardbus interface */ | |
2881 | u8 write_enable; | |
2882 | u8 write_target; | |
2883 | u8 disable; | |
2884 | ||
2885 | /* disable must be done via function #0 */ | |
2886 | if (PCI_FUNC(dev->devfn)) | |
2887 | return; | |
2888 | ||
2889 | pci_read_config_byte(dev, 0xB7, &disable); | |
2890 | if (disable & 0x02) | |
2891 | return; | |
2892 | ||
2893 | pci_read_config_byte(dev, 0x8E, &write_enable); | |
2894 | pci_write_config_byte(dev, 0x8E, 0xAA); | |
2895 | pci_read_config_byte(dev, 0x8D, &write_target); | |
2896 | pci_write_config_byte(dev, 0x8D, 0xB7); | |
2897 | pci_write_config_byte(dev, 0xB7, disable | 0x02); | |
2898 | pci_write_config_byte(dev, 0x8E, write_enable); | |
2899 | pci_write_config_byte(dev, 0x8D, write_target); | |
2900 | ||
2901 | dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); | |
2902 | dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); | |
2903 | } | |
2904 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); | |
2905 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); | |
2906 | ||
2907 | static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) | |
2908 | { | |
2909 | /* disable via firewire interface */ | |
2910 | u8 write_enable; | |
2911 | u8 disable; | |
2912 | ||
2913 | /* disable must be done via function #0 */ | |
2914 | if (PCI_FUNC(dev->devfn)) | |
2915 | return; | |
15bed0f2 | 2916 | /* |
812089e0 | 2917 | * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize |
15bed0f2 MI |
2918 | * certain types of SD/MMC cards. Lowering the SD base |
2919 | * clock frequency from 200Mhz to 50Mhz fixes this issue. | |
2920 | * | |
2921 | * 0x150 - SD2.0 mode enable for changing base clock | |
2922 | * frequency to 50Mhz | |
2923 | * 0xe1 - Base clock frequency | |
2924 | * 0x32 - 50Mhz new clock frequency | |
2925 | * 0xf9 - Key register for 0x150 | |
2926 | * 0xfc - key register for 0xe1 | |
2927 | */ | |
812089e0 AL |
2928 | if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 || |
2929 | dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { | |
15bed0f2 MI |
2930 | pci_write_config_byte(dev, 0xf9, 0xfc); |
2931 | pci_write_config_byte(dev, 0x150, 0x10); | |
2932 | pci_write_config_byte(dev, 0xf9, 0x00); | |
2933 | pci_write_config_byte(dev, 0xfc, 0x01); | |
2934 | pci_write_config_byte(dev, 0xe1, 0x32); | |
2935 | pci_write_config_byte(dev, 0xfc, 0x00); | |
2936 | ||
2937 | dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n"); | |
2938 | } | |
3e309cdf JB |
2939 | |
2940 | pci_read_config_byte(dev, 0xCB, &disable); | |
2941 | ||
2942 | if (disable & 0x02) | |
2943 | return; | |
2944 | ||
2945 | pci_read_config_byte(dev, 0xCA, &write_enable); | |
2946 | pci_write_config_byte(dev, 0xCA, 0x57); | |
2947 | pci_write_config_byte(dev, 0xCB, disable | 0x02); | |
2948 | pci_write_config_byte(dev, 0xCA, write_enable); | |
2949 | ||
2950 | dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); | |
2951 | dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); | |
2952 | ||
03cd8f7e ML |
2953 | } |
2954 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); | |
2955 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); | |
812089e0 AL |
2956 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); |
2957 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); | |
be98ca65 MI |
2958 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); |
2959 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); | |
03cd8f7e ML |
2960 | #endif /*CONFIG_MMC_RICOH_MMC*/ |
2961 | ||
d3f13810 | 2962 | #ifdef CONFIG_DMAR_TABLE |
254e4200 SS |
2963 | #define VTUNCERRMSK_REG 0x1ac |
2964 | #define VTD_MSK_SPEC_ERRORS (1 << 31) | |
2965 | /* | |
2966 | * This is a quirk for masking vt-d spec defined errors to platform error | |
2967 | * handling logic. With out this, platforms using Intel 7500, 5500 chipsets | |
2968 | * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based | |
2969 | * on the RAS config settings of the platform) when a vt-d fault happens. | |
2970 | * The resulting SMI caused the system to hang. | |
2971 | * | |
2972 | * VT-d spec related errors are already handled by the VT-d OS code, so no | |
2973 | * need to report the same error through other channels. | |
2974 | */ | |
2975 | static void vtd_mask_spec_errors(struct pci_dev *dev) | |
2976 | { | |
2977 | u32 word; | |
2978 | ||
2979 | pci_read_config_dword(dev, VTUNCERRMSK_REG, &word); | |
2980 | pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS); | |
2981 | } | |
2982 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); | |
2983 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); | |
2984 | #endif | |
03cd8f7e | 2985 | |
15856ad5 | 2986 | static void fixup_ti816x_class(struct pci_dev *dev) |
63c44080 | 2987 | { |
d1541dc9 BH |
2988 | u32 class = dev->class; |
2989 | ||
63c44080 | 2990 | /* TI 816x devices do not have class code set when in PCIe boot mode */ |
d1541dc9 BH |
2991 | dev->class = PCI_CLASS_MULTIMEDIA_VIDEO << 8; |
2992 | dev_info(&dev->dev, "PCI class overridden (%#08x -> %#08x)\n", | |
2993 | class, dev->class); | |
63c44080 | 2994 | } |
40c96236 | 2995 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800, |
2b4aed1d | 2996 | PCI_CLASS_NOT_DEFINED, 8, fixup_ti816x_class); |
63c44080 | 2997 | |
a94d072b BH |
2998 | /* Some PCIe devices do not work reliably with the claimed maximum |
2999 | * payload size supported. | |
3000 | */ | |
15856ad5 | 3001 | static void fixup_mpss_256(struct pci_dev *dev) |
a94d072b BH |
3002 | { |
3003 | dev->pcie_mpss = 1; /* 256 bytes */ | |
3004 | } | |
3005 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, | |
3006 | PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256); | |
3007 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, | |
3008 | PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256); | |
3009 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, | |
3010 | PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); | |
3011 | ||
d387a8d6 JM |
3012 | /* Intel 5000 and 5100 Memory controllers have an errata with read completion |
3013 | * coalescing (which is enabled by default on some BIOSes) and MPS of 256B. | |
3014 | * Since there is no way of knowing what the PCIE MPS on each fabric will be | |
3015 | * until all of the devices are discovered and buses walked, read completion | |
3016 | * coalescing must be disabled. Unfortunately, it cannot be re-enabled because | |
3017 | * it is possible to hotplug a device with MPS of 256B. | |
3018 | */ | |
15856ad5 | 3019 | static void quirk_intel_mc_errata(struct pci_dev *dev) |
d387a8d6 JM |
3020 | { |
3021 | int err; | |
3022 | u16 rcc; | |
3023 | ||
27d868b5 KB |
3024 | if (pcie_bus_config == PCIE_BUS_TUNE_OFF || |
3025 | pcie_bus_config == PCIE_BUS_DEFAULT) | |
d387a8d6 JM |
3026 | return; |
3027 | ||
3028 | /* Intel errata specifies bits to change but does not say what they are. | |
3029 | * Keeping them magical until such time as the registers and values can | |
3030 | * be explained. | |
3031 | */ | |
3032 | err = pci_read_config_word(dev, 0x48, &rcc); | |
3033 | if (err) { | |
227f0647 | 3034 | dev_err(&dev->dev, "Error attempting to read the read completion coalescing register\n"); |
d387a8d6 JM |
3035 | return; |
3036 | } | |
3037 | ||
3038 | if (!(rcc & (1 << 10))) | |
3039 | return; | |
3040 | ||
3041 | rcc &= ~(1 << 10); | |
3042 | ||
3043 | err = pci_write_config_word(dev, 0x48, rcc); | |
3044 | if (err) { | |
227f0647 | 3045 | dev_err(&dev->dev, "Error attempting to write the read completion coalescing register\n"); |
d387a8d6 JM |
3046 | return; |
3047 | } | |
3048 | ||
227f0647 | 3049 | pr_info_once("Read completion coalescing disabled due to hardware errata relating to 256B MPS\n"); |
d387a8d6 JM |
3050 | } |
3051 | /* Intel 5000 series memory controllers and ports 2-7 */ | |
3052 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata); | |
3053 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata); | |
3054 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata); | |
3055 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata); | |
3056 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata); | |
3057 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata); | |
3058 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata); | |
3059 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata); | |
3060 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata); | |
3061 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata); | |
3062 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata); | |
3063 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata); | |
3064 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata); | |
3065 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata); | |
3066 | /* Intel 5100 series memory controllers and ports 2-7 */ | |
3067 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata); | |
3068 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata); | |
3069 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata); | |
3070 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata); | |
3071 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata); | |
3072 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata); | |
3073 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata); | |
3074 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata); | |
3075 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata); | |
3076 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); | |
3077 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); | |
3078 | ||
3209874a | 3079 | |
12b03188 JM |
3080 | /* |
3081 | * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To | |
3082 | * work around this, query the size it should be configured to by the device and | |
3083 | * modify the resource end to correspond to this new size. | |
3084 | */ | |
3085 | static void quirk_intel_ntb(struct pci_dev *dev) | |
3086 | { | |
3087 | int rc; | |
3088 | u8 val; | |
3089 | ||
3090 | rc = pci_read_config_byte(dev, 0x00D0, &val); | |
3091 | if (rc) | |
3092 | return; | |
3093 | ||
3094 | dev->resource[2].end = dev->resource[2].start + ((u64) 1 << val) - 1; | |
3095 | ||
3096 | rc = pci_read_config_byte(dev, 0x00D1, &val); | |
3097 | if (rc) | |
3098 | return; | |
3099 | ||
3100 | dev->resource[4].end = dev->resource[4].start + ((u64) 1 << val) - 1; | |
3101 | } | |
3102 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb); | |
3103 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); | |
3104 | ||
2729d5b1 MS |
3105 | static ktime_t fixup_debug_start(struct pci_dev *dev, |
3106 | void (*fn)(struct pci_dev *dev)) | |
3209874a | 3107 | { |
8b0e1953 | 3108 | ktime_t calltime = 0; |
2729d5b1 MS |
3109 | |
3110 | dev_dbg(&dev->dev, "calling %pF\n", fn); | |
3111 | if (initcall_debug) { | |
3112 | pr_debug("calling %pF @ %i for %s\n", | |
3113 | fn, task_pid_nr(current), dev_name(&dev->dev)); | |
3114 | calltime = ktime_get(); | |
3115 | } | |
3116 | ||
3117 | return calltime; | |
3118 | } | |
3119 | ||
3120 | static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, | |
3121 | void (*fn)(struct pci_dev *dev)) | |
3209874a | 3122 | { |
2729d5b1 | 3123 | ktime_t delta, rettime; |
3209874a AV |
3124 | unsigned long long duration; |
3125 | ||
2729d5b1 MS |
3126 | if (initcall_debug) { |
3127 | rettime = ktime_get(); | |
3128 | delta = ktime_sub(rettime, calltime); | |
3129 | duration = (unsigned long long) ktime_to_ns(delta) >> 10; | |
3130 | pr_debug("pci fixup %pF returned after %lld usecs for %s\n", | |
3131 | fn, duration, dev_name(&dev->dev)); | |
3132 | } | |
3209874a AV |
3133 | } |
3134 | ||
f67fd55f TJ |
3135 | /* |
3136 | * Some BIOS implementations leave the Intel GPU interrupts enabled, | |
3137 | * even though no one is handling them (f.e. i915 driver is never loaded). | |
3138 | * Additionally the interrupt destination is not set up properly | |
3139 | * and the interrupt ends up -somewhere-. | |
3140 | * | |
3141 | * These spurious interrupts are "sticky" and the kernel disables | |
3142 | * the (shared) interrupt line after 100.000+ generated interrupts. | |
3143 | * | |
3144 | * Fix it by disabling the still enabled interrupts. | |
3145 | * This resolves crashes often seen on monitor unplug. | |
3146 | */ | |
3147 | #define I915_DEIER_REG 0x4400c | |
15856ad5 | 3148 | static void disable_igfx_irq(struct pci_dev *dev) |
f67fd55f TJ |
3149 | { |
3150 | void __iomem *regs = pci_iomap(dev, 0, 0); | |
3151 | if (regs == NULL) { | |
3152 | dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n"); | |
3153 | return; | |
3154 | } | |
3155 | ||
3156 | /* Check if any interrupt line is still enabled */ | |
3157 | if (readl(regs + I915_DEIER_REG) != 0) { | |
227f0647 | 3158 | dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; disabling\n"); |
f67fd55f TJ |
3159 | |
3160 | writel(0, regs + I915_DEIER_REG); | |
3161 | } | |
3162 | ||
3163 | pci_iounmap(dev, regs); | |
3164 | } | |
3165 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); | |
3166 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); | |
7c82126a | 3167 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); |
f67fd55f | 3168 | |
b8cac70a TB |
3169 | /* |
3170 | * PCI devices which are on Intel chips can skip the 10ms delay | |
3171 | * before entering D3 mode. | |
3172 | */ | |
3173 | static void quirk_remove_d3_delay(struct pci_dev *dev) | |
3174 | { | |
3175 | dev->d3_delay = 0; | |
3176 | } | |
cd3e2eb8 | 3177 | /* C600 Series devices do not need 10ms d3_delay */ |
b8cac70a | 3178 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay); |
cd3e2eb8 | 3179 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay); |
b8cac70a | 3180 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay); |
cd3e2eb8 AS |
3181 | /* Lynxpoint-H PCH devices do not need 10ms d3_delay */ |
3182 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay); | |
b8cac70a TB |
3183 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay); |
3184 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay); | |
cd3e2eb8 AS |
3185 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay); |
3186 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay); | |
b8cac70a | 3187 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay); |
cd3e2eb8 AS |
3188 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay); |
3189 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay); | |
3190 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay); | |
3191 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay); | |
b8cac70a | 3192 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay); |
4a118753 SK |
3193 | /* Intel Cherrytrail devices do not need 10ms d3_delay */ |
3194 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3_delay); | |
cd3e2eb8 AS |
3195 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3_delay); |
3196 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3_delay); | |
4a118753 | 3197 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3_delay); |
cd3e2eb8 AS |
3198 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3_delay); |
3199 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3_delay); | |
4a118753 SK |
3200 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3_delay); |
3201 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3_delay); | |
3202 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3_delay); | |
d76d2fe0 | 3203 | |
fbebb9fd | 3204 | /* |
d76d2fe0 | 3205 | * Some devices may pass our check in pci_intx_mask_supported() if |
fbebb9fd BH |
3206 | * PCI_COMMAND_INTX_DISABLE works though they actually do not properly |
3207 | * support this feature. | |
3208 | */ | |
15856ad5 | 3209 | static void quirk_broken_intx_masking(struct pci_dev *dev) |
fbebb9fd BH |
3210 | { |
3211 | dev->broken_intx_masking = 1; | |
3212 | } | |
b88214ce NO |
3213 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x0030, |
3214 | quirk_broken_intx_masking); | |
3215 | DECLARE_PCI_FIXUP_FINAL(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */ | |
3216 | quirk_broken_intx_masking); | |
d76d2fe0 | 3217 | |
3cb30b73 AW |
3218 | /* |
3219 | * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10) | |
3220 | * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC | |
3221 | * | |
3222 | * RTL8110SC - Fails under PCI device assignment using DisINTx masking. | |
3223 | */ | |
b88214ce NO |
3224 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, 0x8169, |
3225 | quirk_broken_intx_masking); | |
fbebb9fd | 3226 | |
8bcf4525 AW |
3227 | /* |
3228 | * Intel i40e (XL710/X710) 10/20/40GbE NICs all have broken INTx masking, | |
3229 | * DisINTx can be set but the interrupt status bit is non-functional. | |
3230 | */ | |
b88214ce NO |
3231 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1572, |
3232 | quirk_broken_intx_masking); | |
3233 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1574, | |
3234 | quirk_broken_intx_masking); | |
3235 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1580, | |
3236 | quirk_broken_intx_masking); | |
3237 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1581, | |
3238 | quirk_broken_intx_masking); | |
3239 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1583, | |
3240 | quirk_broken_intx_masking); | |
3241 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1584, | |
3242 | quirk_broken_intx_masking); | |
3243 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1585, | |
3244 | quirk_broken_intx_masking); | |
3245 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1586, | |
3246 | quirk_broken_intx_masking); | |
3247 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1587, | |
3248 | quirk_broken_intx_masking); | |
3249 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1588, | |
3250 | quirk_broken_intx_masking); | |
3251 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1589, | |
3252 | quirk_broken_intx_masking); | |
d40b7fd2 AW |
3253 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158a, |
3254 | quirk_broken_intx_masking); | |
3255 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158b, | |
3256 | quirk_broken_intx_masking); | |
b88214ce NO |
3257 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d0, |
3258 | quirk_broken_intx_masking); | |
3259 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d1, | |
3260 | quirk_broken_intx_masking); | |
3261 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d2, | |
3262 | quirk_broken_intx_masking); | |
8bcf4525 | 3263 | |
d76d2fe0 NO |
3264 | static u16 mellanox_broken_intx_devs[] = { |
3265 | PCI_DEVICE_ID_MELLANOX_HERMON_SDR, | |
3266 | PCI_DEVICE_ID_MELLANOX_HERMON_DDR, | |
3267 | PCI_DEVICE_ID_MELLANOX_HERMON_QDR, | |
3268 | PCI_DEVICE_ID_MELLANOX_HERMON_DDR_GEN2, | |
3269 | PCI_DEVICE_ID_MELLANOX_HERMON_QDR_GEN2, | |
3270 | PCI_DEVICE_ID_MELLANOX_HERMON_EN, | |
3271 | PCI_DEVICE_ID_MELLANOX_HERMON_EN_GEN2, | |
3272 | PCI_DEVICE_ID_MELLANOX_CONNECTX_EN, | |
3273 | PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_T_GEN2, | |
3274 | PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_GEN2, | |
3275 | PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_5_GEN2, | |
3276 | PCI_DEVICE_ID_MELLANOX_CONNECTX2, | |
3277 | PCI_DEVICE_ID_MELLANOX_CONNECTX3, | |
3278 | PCI_DEVICE_ID_MELLANOX_CONNECTX3_PRO, | |
d76d2fe0 NO |
3279 | }; |
3280 | ||
1600f625 NO |
3281 | #define CONNECTX_4_CURR_MAX_MINOR 99 |
3282 | #define CONNECTX_4_INTX_SUPPORT_MINOR 14 | |
3283 | ||
3284 | /* | |
3285 | * Check ConnectX-4/LX FW version to see if it supports legacy interrupts. | |
3286 | * If so, don't mark it as broken. | |
3287 | * FW minor > 99 means older FW version format and no INTx masking support. | |
3288 | * FW minor < 14 means new FW version format and no INTx masking support. | |
3289 | */ | |
d76d2fe0 NO |
3290 | static void mellanox_check_broken_intx_masking(struct pci_dev *pdev) |
3291 | { | |
1600f625 NO |
3292 | __be32 __iomem *fw_ver; |
3293 | u16 fw_major; | |
3294 | u16 fw_minor; | |
3295 | u16 fw_subminor; | |
3296 | u32 fw_maj_min; | |
3297 | u32 fw_sub_min; | |
d76d2fe0 NO |
3298 | int i; |
3299 | ||
3300 | for (i = 0; i < ARRAY_SIZE(mellanox_broken_intx_devs); i++) { | |
3301 | if (pdev->device == mellanox_broken_intx_devs[i]) { | |
3302 | pdev->broken_intx_masking = 1; | |
3303 | return; | |
3304 | } | |
3305 | } | |
1600f625 NO |
3306 | |
3307 | /* Getting here means Connect-IB cards and up. Connect-IB has no INTx | |
3308 | * support so shouldn't be checked further | |
3309 | */ | |
3310 | if (pdev->device == PCI_DEVICE_ID_MELLANOX_CONNECTIB) | |
3311 | return; | |
3312 | ||
3313 | if (pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4 && | |
3314 | pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4_LX) | |
3315 | return; | |
3316 | ||
3317 | /* For ConnectX-4 and ConnectX-4LX, need to check FW support */ | |
3318 | if (pci_enable_device_mem(pdev)) { | |
3319 | dev_warn(&pdev->dev, "Can't enable device memory\n"); | |
3320 | return; | |
3321 | } | |
3322 | ||
3323 | fw_ver = ioremap(pci_resource_start(pdev, 0), 4); | |
3324 | if (!fw_ver) { | |
3325 | dev_warn(&pdev->dev, "Can't map ConnectX-4 initialization segment\n"); | |
3326 | goto out; | |
3327 | } | |
3328 | ||
3329 | /* Reading from resource space should be 32b aligned */ | |
3330 | fw_maj_min = ioread32be(fw_ver); | |
3331 | fw_sub_min = ioread32be(fw_ver + 1); | |
3332 | fw_major = fw_maj_min & 0xffff; | |
3333 | fw_minor = fw_maj_min >> 16; | |
3334 | fw_subminor = fw_sub_min & 0xffff; | |
3335 | if (fw_minor > CONNECTX_4_CURR_MAX_MINOR || | |
3336 | fw_minor < CONNECTX_4_INTX_SUPPORT_MINOR) { | |
3337 | dev_warn(&pdev->dev, "ConnectX-4: FW %u.%u.%u doesn't support INTx masking, disabling. Please upgrade FW to %d.14.1100 and up for INTx support\n", | |
3338 | fw_major, fw_minor, fw_subminor, pdev->device == | |
3339 | PCI_DEVICE_ID_MELLANOX_CONNECTX4 ? 12 : 14); | |
3340 | pdev->broken_intx_masking = 1; | |
3341 | } | |
3342 | ||
3343 | iounmap(fw_ver); | |
3344 | ||
3345 | out: | |
3346 | pci_disable_device(pdev); | |
d76d2fe0 NO |
3347 | } |
3348 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID, | |
3349 | mellanox_check_broken_intx_masking); | |
8bcf4525 | 3350 | |
c3e59ee4 AW |
3351 | static void quirk_no_bus_reset(struct pci_dev *dev) |
3352 | { | |
3353 | dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET; | |
3354 | } | |
3355 | ||
3356 | /* | |
9ac0108c CB |
3357 | * Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset. |
3358 | * The device will throw a Link Down error on AER-capable systems and | |
3359 | * regardless of AER, config space of the device is never accessible again | |
3360 | * and typically causes the system to hang or reset when access is attempted. | |
c3e59ee4 AW |
3361 | * http://www.spinics.net/lists/linux-pci/msg34797.html |
3362 | */ | |
3363 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset); | |
9ac0108c CB |
3364 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset); |
3365 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset); | |
8e2e0317 | 3366 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset); |
c3e59ee4 | 3367 | |
d84f3174 AW |
3368 | static void quirk_no_pm_reset(struct pci_dev *dev) |
3369 | { | |
3370 | /* | |
3371 | * We can't do a bus reset on root bus devices, but an ineffective | |
3372 | * PM reset may be better than nothing. | |
3373 | */ | |
3374 | if (!pci_is_root_bus(dev->bus)) | |
3375 | dev->dev_flags |= PCI_DEV_FLAGS_NO_PM_RESET; | |
3376 | } | |
3377 | ||
3378 | /* | |
3379 | * Some AMD/ATI GPUS (HD8570 - Oland) report that a D3hot->D0 transition | |
3380 | * causes a reset (i.e., they advertise NoSoftRst-). This transition seems | |
3381 | * to have no effect on the device: it retains the framebuffer contents and | |
3382 | * monitor sync. Advertising this support makes other layers, like VFIO, | |
3383 | * assume pci_reset_function() is viable for this device. Mark it as | |
3384 | * unavailable to skip it when testing reset methods. | |
3385 | */ | |
3386 | DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID, | |
3387 | PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset); | |
3388 | ||
19bf4d4f LW |
3389 | /* |
3390 | * Thunderbolt controllers with broken MSI hotplug signaling: | |
3391 | * Entire 1st generation (Light Ridge, Eagle Ridge, Light Peak) and part | |
3392 | * of the 2nd generation (Cactus Ridge 4C up to revision 1, Port Ridge). | |
3393 | */ | |
3394 | static void quirk_thunderbolt_hotplug_msi(struct pci_dev *pdev) | |
3395 | { | |
3396 | if (pdev->is_hotplug_bridge && | |
3397 | (pdev->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C || | |
3398 | pdev->revision <= 1)) | |
3399 | pdev->no_msi = 1; | |
3400 | } | |
3401 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_RIDGE, | |
3402 | quirk_thunderbolt_hotplug_msi); | |
3403 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EAGLE_RIDGE, | |
3404 | quirk_thunderbolt_hotplug_msi); | |
3405 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_PEAK, | |
3406 | quirk_thunderbolt_hotplug_msi); | |
3407 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, | |
3408 | quirk_thunderbolt_hotplug_msi); | |
3409 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE, | |
3410 | quirk_thunderbolt_hotplug_msi); | |
3411 | ||
1c7de2b4 AK |
3412 | static void quirk_chelsio_extend_vpd(struct pci_dev *dev) |
3413 | { | |
3414 | pci_set_vpd_size(dev, 8192); | |
3415 | } | |
3416 | ||
3417 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x20, quirk_chelsio_extend_vpd); | |
3418 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x21, quirk_chelsio_extend_vpd); | |
3419 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x22, quirk_chelsio_extend_vpd); | |
3420 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x23, quirk_chelsio_extend_vpd); | |
3421 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x24, quirk_chelsio_extend_vpd); | |
3422 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x25, quirk_chelsio_extend_vpd); | |
3423 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x26, quirk_chelsio_extend_vpd); | |
3424 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x30, quirk_chelsio_extend_vpd); | |
3425 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x31, quirk_chelsio_extend_vpd); | |
3426 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x32, quirk_chelsio_extend_vpd); | |
3427 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x35, quirk_chelsio_extend_vpd); | |
3428 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x36, quirk_chelsio_extend_vpd); | |
3429 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x37, quirk_chelsio_extend_vpd); | |
3430 | ||
1df5172c AN |
3431 | #ifdef CONFIG_ACPI |
3432 | /* | |
3433 | * Apple: Shutdown Cactus Ridge Thunderbolt controller. | |
3434 | * | |
3435 | * On Apple hardware the Cactus Ridge Thunderbolt controller needs to be | |
3436 | * shutdown before suspend. Otherwise the native host interface (NHI) will not | |
3437 | * be present after resume if a device was plugged in before suspend. | |
3438 | * | |
3439 | * The thunderbolt controller consists of a pcie switch with downstream | |
3440 | * bridges leading to the NHI and to the tunnel pci bridges. | |
3441 | * | |
3442 | * This quirk cuts power to the whole chip. Therefore we have to apply it | |
3443 | * during suspend_noirq of the upstream bridge. | |
3444 | * | |
3445 | * Power is automagically restored before resume. No action is needed. | |
3446 | */ | |
3447 | static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev) | |
3448 | { | |
3449 | acpi_handle bridge, SXIO, SXFP, SXLV; | |
3450 | ||
630b3aff | 3451 | if (!x86_apple_machine) |
1df5172c AN |
3452 | return; |
3453 | if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) | |
3454 | return; | |
3455 | bridge = ACPI_HANDLE(&dev->dev); | |
3456 | if (!bridge) | |
3457 | return; | |
3458 | /* | |
3459 | * SXIO and SXLV are present only on machines requiring this quirk. | |
3460 | * TB bridges in external devices might have the same device id as those | |
3461 | * on the host, but they will not have the associated ACPI methods. This | |
3462 | * implicitly checks that we are at the right bridge. | |
3463 | */ | |
3464 | if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO)) | |
3465 | || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP)) | |
3466 | || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV))) | |
3467 | return; | |
3468 | dev_info(&dev->dev, "quirk: cutting power to thunderbolt controller...\n"); | |
3469 | ||
3470 | /* magic sequence */ | |
3471 | acpi_execute_simple_method(SXIO, NULL, 1); | |
3472 | acpi_execute_simple_method(SXFP, NULL, 0); | |
3473 | msleep(300); | |
3474 | acpi_execute_simple_method(SXLV, NULL, 0); | |
3475 | acpi_execute_simple_method(SXIO, NULL, 0); | |
3476 | acpi_execute_simple_method(SXLV, NULL, 0); | |
3477 | } | |
1d111406 LW |
3478 | DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL, |
3479 | PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, | |
1df5172c AN |
3480 | quirk_apple_poweroff_thunderbolt); |
3481 | ||
3482 | /* | |
3483 | * Apple: Wait for the thunderbolt controller to reestablish pci tunnels. | |
3484 | * | |
3485 | * During suspend the thunderbolt controller is reset and all pci | |
3486 | * tunnels are lost. The NHI driver will try to reestablish all tunnels | |
3487 | * during resume. We have to manually wait for the NHI since there is | |
3488 | * no parent child relationship between the NHI and the tunneled | |
3489 | * bridges. | |
3490 | */ | |
3491 | static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) | |
3492 | { | |
3493 | struct pci_dev *sibling = NULL; | |
3494 | struct pci_dev *nhi = NULL; | |
3495 | ||
630b3aff | 3496 | if (!x86_apple_machine) |
1df5172c AN |
3497 | return; |
3498 | if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM) | |
3499 | return; | |
3500 | /* | |
3501 | * Find the NHI and confirm that we are a bridge on the tb host | |
3502 | * controller and not on a tb endpoint. | |
3503 | */ | |
3504 | sibling = pci_get_slot(dev->bus, 0x0); | |
3505 | if (sibling == dev) | |
3506 | goto out; /* we are the downstream bridge to the NHI */ | |
3507 | if (!sibling || !sibling->subordinate) | |
3508 | goto out; | |
3509 | nhi = pci_get_slot(sibling->subordinate, 0x0); | |
3510 | if (!nhi) | |
3511 | goto out; | |
3512 | if (nhi->vendor != PCI_VENDOR_ID_INTEL | |
19bf4d4f LW |
3513 | || (nhi->device != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE && |
3514 | nhi->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C && | |
82a6a81c | 3515 | nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI && |
1d111406 | 3516 | nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI) |
25eb7e5c | 3517 | || nhi->class != PCI_CLASS_SYSTEM_OTHER << 8) |
1df5172c | 3518 | goto out; |
c89ac443 | 3519 | dev_info(&dev->dev, "quirk: waiting for thunderbolt to reestablish PCI tunnels...\n"); |
1df5172c AN |
3520 | device_pm_wait_for_dev(&dev->dev, &nhi->dev); |
3521 | out: | |
3522 | pci_dev_put(nhi); | |
3523 | pci_dev_put(sibling); | |
3524 | } | |
19bf4d4f LW |
3525 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, |
3526 | PCI_DEVICE_ID_INTEL_LIGHT_RIDGE, | |
1df5172c | 3527 | quirk_apple_wait_for_thunderbolt); |
1d111406 LW |
3528 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, |
3529 | PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, | |
1df5172c | 3530 | quirk_apple_wait_for_thunderbolt); |
82a6a81c XG |
3531 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, |
3532 | PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE, | |
3533 | quirk_apple_wait_for_thunderbolt); | |
1d111406 LW |
3534 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, |
3535 | PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE, | |
1df5172c AN |
3536 | quirk_apple_wait_for_thunderbolt); |
3537 | #endif | |
3538 | ||
bfb0f330 JB |
3539 | static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, |
3540 | struct pci_fixup *end) | |
3d137310 | 3541 | { |
2729d5b1 MS |
3542 | ktime_t calltime; |
3543 | ||
f4ca5c6a YL |
3544 | for (; f < end; f++) |
3545 | if ((f->class == (u32) (dev->class >> f->class_shift) || | |
3546 | f->class == (u32) PCI_ANY_ID) && | |
3547 | (f->vendor == dev->vendor || | |
3548 | f->vendor == (u16) PCI_ANY_ID) && | |
3549 | (f->device == dev->device || | |
3550 | f->device == (u16) PCI_ANY_ID)) { | |
2729d5b1 MS |
3551 | calltime = fixup_debug_start(dev, f->hook); |
3552 | f->hook(dev); | |
3553 | fixup_debug_report(dev, calltime, f->hook); | |
3d137310 | 3554 | } |
3d137310 TP |
3555 | } |
3556 | ||
3557 | extern struct pci_fixup __start_pci_fixups_early[]; | |
3558 | extern struct pci_fixup __end_pci_fixups_early[]; | |
3559 | extern struct pci_fixup __start_pci_fixups_header[]; | |
3560 | extern struct pci_fixup __end_pci_fixups_header[]; | |
3561 | extern struct pci_fixup __start_pci_fixups_final[]; | |
3562 | extern struct pci_fixup __end_pci_fixups_final[]; | |
3563 | extern struct pci_fixup __start_pci_fixups_enable[]; | |
3564 | extern struct pci_fixup __end_pci_fixups_enable[]; | |
3565 | extern struct pci_fixup __start_pci_fixups_resume[]; | |
3566 | extern struct pci_fixup __end_pci_fixups_resume[]; | |
3567 | extern struct pci_fixup __start_pci_fixups_resume_early[]; | |
3568 | extern struct pci_fixup __end_pci_fixups_resume_early[]; | |
3569 | extern struct pci_fixup __start_pci_fixups_suspend[]; | |
3570 | extern struct pci_fixup __end_pci_fixups_suspend[]; | |
7d2a01b8 AN |
3571 | extern struct pci_fixup __start_pci_fixups_suspend_late[]; |
3572 | extern struct pci_fixup __end_pci_fixups_suspend_late[]; | |
3d137310 | 3573 | |
95df8b87 | 3574 | static bool pci_apply_fixup_final_quirks; |
3d137310 TP |
3575 | |
3576 | void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) | |
3577 | { | |
3578 | struct pci_fixup *start, *end; | |
3579 | ||
3c78bc61 | 3580 | switch (pass) { |
3d137310 TP |
3581 | case pci_fixup_early: |
3582 | start = __start_pci_fixups_early; | |
3583 | end = __end_pci_fixups_early; | |
3584 | break; | |
3585 | ||
3586 | case pci_fixup_header: | |
3587 | start = __start_pci_fixups_header; | |
3588 | end = __end_pci_fixups_header; | |
3589 | break; | |
3590 | ||
3591 | case pci_fixup_final: | |
95df8b87 MS |
3592 | if (!pci_apply_fixup_final_quirks) |
3593 | return; | |
3d137310 TP |
3594 | start = __start_pci_fixups_final; |
3595 | end = __end_pci_fixups_final; | |
3596 | break; | |
3597 | ||
3598 | case pci_fixup_enable: | |
3599 | start = __start_pci_fixups_enable; | |
3600 | end = __end_pci_fixups_enable; | |
3601 | break; | |
3602 | ||
3603 | case pci_fixup_resume: | |
3604 | start = __start_pci_fixups_resume; | |
3605 | end = __end_pci_fixups_resume; | |
3606 | break; | |
3607 | ||
3608 | case pci_fixup_resume_early: | |
3609 | start = __start_pci_fixups_resume_early; | |
3610 | end = __end_pci_fixups_resume_early; | |
3611 | break; | |
3612 | ||
3613 | case pci_fixup_suspend: | |
3614 | start = __start_pci_fixups_suspend; | |
3615 | end = __end_pci_fixups_suspend; | |
3616 | break; | |
3617 | ||
7d2a01b8 AN |
3618 | case pci_fixup_suspend_late: |
3619 | start = __start_pci_fixups_suspend_late; | |
3620 | end = __end_pci_fixups_suspend_late; | |
3621 | break; | |
3622 | ||
3d137310 TP |
3623 | default: |
3624 | /* stupid compiler warning, you would think with an enum... */ | |
3625 | return; | |
3626 | } | |
3627 | pci_do_fixups(dev, start, end); | |
3628 | } | |
93177a74 | 3629 | EXPORT_SYMBOL(pci_fixup_device); |
8d86fb2c | 3630 | |
735bff10 | 3631 | |
00010268 | 3632 | static int __init pci_apply_final_quirks(void) |
8d86fb2c DW |
3633 | { |
3634 | struct pci_dev *dev = NULL; | |
ac1aa47b JB |
3635 | u8 cls = 0; |
3636 | u8 tmp; | |
3637 | ||
3638 | if (pci_cache_line_size) | |
3639 | printk(KERN_DEBUG "PCI: CLS %u bytes\n", | |
3640 | pci_cache_line_size << 2); | |
8d86fb2c | 3641 | |
95df8b87 | 3642 | pci_apply_fixup_final_quirks = true; |
4e344b1c | 3643 | for_each_pci_dev(dev) { |
8d86fb2c | 3644 | pci_fixup_device(pci_fixup_final, dev); |
ac1aa47b JB |
3645 | /* |
3646 | * If arch hasn't set it explicitly yet, use the CLS | |
3647 | * value shared by all PCI devices. If there's a | |
3648 | * mismatch, fall back to the default value. | |
3649 | */ | |
3650 | if (!pci_cache_line_size) { | |
3651 | pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp); | |
3652 | if (!cls) | |
3653 | cls = tmp; | |
3654 | if (!tmp || cls == tmp) | |
3655 | continue; | |
3656 | ||
227f0647 RD |
3657 | printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), using %u bytes\n", |
3658 | cls << 2, tmp << 2, | |
ac1aa47b JB |
3659 | pci_dfl_cache_line_size << 2); |
3660 | pci_cache_line_size = pci_dfl_cache_line_size; | |
3661 | } | |
3662 | } | |
735bff10 | 3663 | |
ac1aa47b JB |
3664 | if (!pci_cache_line_size) { |
3665 | printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n", | |
3666 | cls << 2, pci_dfl_cache_line_size << 2); | |
2820f333 | 3667 | pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; |
8d86fb2c DW |
3668 | } |
3669 | ||
3670 | return 0; | |
3671 | } | |
3672 | ||
cf6f3bf7 | 3673 | fs_initcall_sync(pci_apply_final_quirks); |
b9c3b266 DC |
3674 | |
3675 | /* | |
4091fb95 | 3676 | * Following are device-specific reset methods which can be used to |
b9c3b266 DC |
3677 | * reset a single function if other methods (e.g. FLR, PM D0->D3) are |
3678 | * not available. | |
3679 | */ | |
c763e7b5 DC |
3680 | static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) |
3681 | { | |
76b57c67 BH |
3682 | /* |
3683 | * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf | |
3684 | * | |
3685 | * The 82599 supports FLR on VFs, but FLR support is reported only | |
3686 | * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5). | |
c8d8096a CH |
3687 | * Thus we must call pcie_flr() directly without first checking if it is |
3688 | * supported. | |
76b57c67 | 3689 | */ |
c8d8096a CH |
3690 | if (!probe) |
3691 | pcie_flr(dev); | |
c763e7b5 DC |
3692 | return 0; |
3693 | } | |
3694 | ||
aba72ddc VS |
3695 | #define SOUTH_CHICKEN2 0xc2004 |
3696 | #define PCH_PP_STATUS 0xc7200 | |
3697 | #define PCH_PP_CONTROL 0xc7204 | |
df558de1 XH |
3698 | #define MSG_CTL 0x45010 |
3699 | #define NSDE_PWR_STATE 0xd0100 | |
3700 | #define IGD_OPERATION_TIMEOUT 10000 /* set timeout 10 seconds */ | |
3701 | ||
3702 | static int reset_ivb_igd(struct pci_dev *dev, int probe) | |
3703 | { | |
3704 | void __iomem *mmio_base; | |
3705 | unsigned long timeout; | |
3706 | u32 val; | |
3707 | ||
3708 | if (probe) | |
3709 | return 0; | |
3710 | ||
3711 | mmio_base = pci_iomap(dev, 0, 0); | |
3712 | if (!mmio_base) | |
3713 | return -ENOMEM; | |
3714 | ||
3715 | iowrite32(0x00000002, mmio_base + MSG_CTL); | |
3716 | ||
3717 | /* | |
3718 | * Clobbering SOUTH_CHICKEN2 register is fine only if the next | |
3719 | * driver loaded sets the right bits. However, this's a reset and | |
3720 | * the bits have been set by i915 previously, so we clobber | |
3721 | * SOUTH_CHICKEN2 register directly here. | |
3722 | */ | |
3723 | iowrite32(0x00000005, mmio_base + SOUTH_CHICKEN2); | |
3724 | ||
3725 | val = ioread32(mmio_base + PCH_PP_CONTROL) & 0xfffffffe; | |
3726 | iowrite32(val, mmio_base + PCH_PP_CONTROL); | |
3727 | ||
3728 | timeout = jiffies + msecs_to_jiffies(IGD_OPERATION_TIMEOUT); | |
3729 | do { | |
3730 | val = ioread32(mmio_base + PCH_PP_STATUS); | |
3731 | if ((val & 0xb0000000) == 0) | |
3732 | goto reset_complete; | |
3733 | msleep(10); | |
3734 | } while (time_before(jiffies, timeout)); | |
3735 | dev_warn(&dev->dev, "timeout during reset\n"); | |
3736 | ||
3737 | reset_complete: | |
3738 | iowrite32(0x00000002, mmio_base + NSDE_PWR_STATE); | |
3739 | ||
3740 | pci_iounmap(dev, mmio_base); | |
3741 | return 0; | |
3742 | } | |
3743 | ||
2c6217e0 CL |
3744 | /* |
3745 | * Device-specific reset method for Chelsio T4-based adapters. | |
3746 | */ | |
3747 | static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe) | |
3748 | { | |
3749 | u16 old_command; | |
3750 | u16 msix_flags; | |
3751 | ||
3752 | /* | |
3753 | * If this isn't a Chelsio T4-based device, return -ENOTTY indicating | |
3754 | * that we have no device-specific reset method. | |
3755 | */ | |
3756 | if ((dev->device & 0xf000) != 0x4000) | |
3757 | return -ENOTTY; | |
3758 | ||
3759 | /* | |
3760 | * If this is the "probe" phase, return 0 indicating that we can | |
3761 | * reset this device. | |
3762 | */ | |
3763 | if (probe) | |
3764 | return 0; | |
3765 | ||
3766 | /* | |
3767 | * T4 can wedge if there are DMAs in flight within the chip and Bus | |
3768 | * Master has been disabled. We need to have it on till the Function | |
3769 | * Level Reset completes. (BUS_MASTER is disabled in | |
3770 | * pci_reset_function()). | |
3771 | */ | |
3772 | pci_read_config_word(dev, PCI_COMMAND, &old_command); | |
3773 | pci_write_config_word(dev, PCI_COMMAND, | |
3774 | old_command | PCI_COMMAND_MASTER); | |
3775 | ||
3776 | /* | |
3777 | * Perform the actual device function reset, saving and restoring | |
3778 | * configuration information around the reset. | |
3779 | */ | |
3780 | pci_save_state(dev); | |
3781 | ||
3782 | /* | |
3783 | * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts | |
3784 | * are disabled when an MSI-X interrupt message needs to be delivered. | |
3785 | * So we briefly re-enable MSI-X interrupts for the duration of the | |
3786 | * FLR. The pci_restore_state() below will restore the original | |
3787 | * MSI-X state. | |
3788 | */ | |
3789 | pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags); | |
3790 | if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0) | |
3791 | pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, | |
3792 | msix_flags | | |
3793 | PCI_MSIX_FLAGS_ENABLE | | |
3794 | PCI_MSIX_FLAGS_MASKALL); | |
3795 | ||
48f52d1a | 3796 | pcie_flr(dev); |
2c6217e0 CL |
3797 | |
3798 | /* | |
3799 | * Restore the configuration information (BAR values, etc.) including | |
3800 | * the original PCI Configuration Space Command word, and return | |
3801 | * success. | |
3802 | */ | |
3803 | pci_restore_state(dev); | |
3804 | pci_write_config_word(dev, PCI_COMMAND, old_command); | |
3805 | return 0; | |
3806 | } | |
3807 | ||
c763e7b5 | 3808 | #define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed |
df558de1 XH |
3809 | #define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156 |
3810 | #define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166 | |
c763e7b5 | 3811 | |
5b889bf2 | 3812 | static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { |
c763e7b5 DC |
3813 | { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, |
3814 | reset_intel_82599_sfp_virtfn }, | |
df558de1 XH |
3815 | { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA, |
3816 | reset_ivb_igd }, | |
3817 | { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA, | |
3818 | reset_ivb_igd }, | |
2c6217e0 CL |
3819 | { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, |
3820 | reset_chelsio_generic_dev }, | |
b9c3b266 DC |
3821 | { 0 } |
3822 | }; | |
5b889bf2 | 3823 | |
df558de1 XH |
3824 | /* |
3825 | * These device-specific reset methods are here rather than in a driver | |
3826 | * because when a host assigns a device to a guest VM, the host may need | |
3827 | * to reset the device but probably doesn't have a driver for it. | |
3828 | */ | |
5b889bf2 RW |
3829 | int pci_dev_specific_reset(struct pci_dev *dev, int probe) |
3830 | { | |
df9d1e8a | 3831 | const struct pci_dev_reset_methods *i; |
5b889bf2 RW |
3832 | |
3833 | for (i = pci_dev_reset_methods; i->reset; i++) { | |
3834 | if ((i->vendor == dev->vendor || | |
3835 | i->vendor == (u16)PCI_ANY_ID) && | |
3836 | (i->device == dev->device || | |
3837 | i->device == (u16)PCI_ANY_ID)) | |
3838 | return i->reset(dev, probe); | |
3839 | } | |
3840 | ||
3841 | return -ENOTTY; | |
3842 | } | |
12ea6cad | 3843 | |
ec637fb2 AW |
3844 | static void quirk_dma_func0_alias(struct pci_dev *dev) |
3845 | { | |
f0af9593 BH |
3846 | if (PCI_FUNC(dev->devfn) != 0) |
3847 | pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); | |
ec637fb2 AW |
3848 | } |
3849 | ||
3850 | /* | |
3851 | * https://bugzilla.redhat.com/show_bug.cgi?id=605888 | |
3852 | * | |
3853 | * Some Ricoh devices use function 0 as the PCIe requester ID for DMA. | |
3854 | */ | |
3855 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias); | |
3856 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias); | |
3857 | ||
cc346a47 AW |
3858 | static void quirk_dma_func1_alias(struct pci_dev *dev) |
3859 | { | |
f0af9593 BH |
3860 | if (PCI_FUNC(dev->devfn) != 1) |
3861 | pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 1)); | |
cc346a47 AW |
3862 | } |
3863 | ||
3864 | /* | |
3865 | * Marvell 88SE9123 uses function 1 as the requester ID for DMA. In some | |
3866 | * SKUs function 1 is present and is a legacy IDE controller, in other | |
3867 | * SKUs this function is not present, making this a ghost requester. | |
3868 | * https://bugzilla.kernel.org/show_bug.cgi?id=42679 | |
3869 | */ | |
247de694 SA |
3870 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120, |
3871 | quirk_dma_func1_alias); | |
cc346a47 AW |
3872 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123, |
3873 | quirk_dma_func1_alias); | |
3874 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */ | |
3875 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130, | |
3876 | quirk_dma_func1_alias); | |
3877 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */ | |
3878 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172, | |
3879 | quirk_dma_func1_alias); | |
3880 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */ | |
3881 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a, | |
3882 | quirk_dma_func1_alias); | |
00456b35 AS |
3883 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c78 */ |
3884 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9182, | |
3885 | quirk_dma_func1_alias); | |
cc346a47 AW |
3886 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */ |
3887 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0, | |
3888 | quirk_dma_func1_alias); | |
3889 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */ | |
3890 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230, | |
3891 | quirk_dma_func1_alias); | |
c2e0fb96 JC |
3892 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642, |
3893 | quirk_dma_func1_alias); | |
cc346a47 AW |
3894 | /* https://bugs.gentoo.org/show_bug.cgi?id=497630 */ |
3895 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON, | |
3896 | PCI_DEVICE_ID_JMICRON_JMB388_ESD, | |
3897 | quirk_dma_func1_alias); | |
8b9b963e TS |
3898 | /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c117 */ |
3899 | DECLARE_PCI_FIXUP_HEADER(0x1c28, /* Lite-On */ | |
3900 | 0x0122, /* Plextor M6E (Marvell 88SS9183)*/ | |
3901 | quirk_dma_func1_alias); | |
cc346a47 | 3902 | |
d3d2ab43 AW |
3903 | /* |
3904 | * Some devices DMA with the wrong devfn, not just the wrong function. | |
3905 | * quirk_fixed_dma_alias() uses this table to create fixed aliases, where | |
3906 | * the alias is "fixed" and independent of the device devfn. | |
3907 | * | |
3908 | * For example, the Adaptec 3405 is a PCIe card with an Intel 80333 I/O | |
3909 | * processor. To software, this appears as a PCIe-to-PCI/X bridge with a | |
3910 | * single device on the secondary bus. In reality, the single exposed | |
3911 | * device at 0e.0 is the Address Translation Unit (ATU) of the controller | |
3912 | * that provides a bridge to the internal bus of the I/O processor. The | |
3913 | * controller supports private devices, which can be hidden from PCI config | |
3914 | * space. In the case of the Adaptec 3405, a private device at 01.0 | |
3915 | * appears to be the DMA engine, which therefore needs to become a DMA | |
3916 | * alias for the device. | |
3917 | */ | |
3918 | static const struct pci_device_id fixed_dma_alias_tbl[] = { | |
3919 | { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, | |
3920 | PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */ | |
3921 | .driver_data = PCI_DEVFN(1, 0) }, | |
db83f87b AW |
3922 | { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, |
3923 | PCI_VENDOR_ID_ADAPTEC2, 0x02bc), /* Adaptec 3805 */ | |
3924 | .driver_data = PCI_DEVFN(1, 0) }, | |
d3d2ab43 AW |
3925 | { 0 } |
3926 | }; | |
3927 | ||
3928 | static void quirk_fixed_dma_alias(struct pci_dev *dev) | |
3929 | { | |
3930 | const struct pci_device_id *id; | |
3931 | ||
3932 | id = pci_match_id(fixed_dma_alias_tbl, dev); | |
48c83080 | 3933 | if (id) |
f0af9593 | 3934 | pci_add_dma_alias(dev, id->driver_data); |
d3d2ab43 AW |
3935 | } |
3936 | ||
3937 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias); | |
3938 | ||
ebdb51eb AW |
3939 | /* |
3940 | * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in | |
3941 | * using the wrong DMA alias for the device. Some of these devices can be | |
3942 | * used as either forward or reverse bridges, so we need to test whether the | |
3943 | * device is operating in the correct mode. We could probably apply this | |
3944 | * quirk to PCI_ANY_ID, but for now we'll just use known offenders. The test | |
3945 | * is for a non-root, non-PCIe bridge where the upstream device is PCIe and | |
3946 | * is not a PCIe-to-PCI bridge, then @pdev is actually a PCIe-to-PCI bridge. | |
3947 | */ | |
3948 | static void quirk_use_pcie_bridge_dma_alias(struct pci_dev *pdev) | |
3949 | { | |
3950 | if (!pci_is_root_bus(pdev->bus) && | |
3951 | pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE && | |
3952 | !pci_is_pcie(pdev) && pci_is_pcie(pdev->bus->self) && | |
3953 | pci_pcie_type(pdev->bus->self) != PCI_EXP_TYPE_PCI_BRIDGE) | |
3954 | pdev->dev_flags |= PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS; | |
3955 | } | |
3956 | /* ASM1083/1085, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c46 */ | |
3957 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080, | |
3958 | quirk_use_pcie_bridge_dma_alias); | |
3959 | /* Tundra 8113, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c43 */ | |
3960 | DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias); | |
98ca50db AW |
3961 | /* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */ |
3962 | DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias); | |
fce5d57e JW |
3963 | /* ITE 8893 has the same problem as the 8892 */ |
3964 | DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8893, quirk_use_pcie_bridge_dma_alias); | |
8ab4abbe AW |
3965 | /* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */ |
3966 | DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias); | |
ebdb51eb | 3967 | |
b1a928cd JL |
3968 | /* |
3969 | * MIC x200 NTB forwards PCIe traffic using multiple alien RIDs. They have to | |
3970 | * be added as aliases to the DMA device in order to allow buffer access | |
3971 | * when IOMMU is enabled. Following devfns have to match RIT-LUT table | |
3972 | * programmed in the EEPROM. | |
3973 | */ | |
3974 | static void quirk_mic_x200_dma_alias(struct pci_dev *pdev) | |
3975 | { | |
3976 | pci_add_dma_alias(pdev, PCI_DEVFN(0x10, 0x0)); | |
3977 | pci_add_dma_alias(pdev, PCI_DEVFN(0x11, 0x0)); | |
3978 | pci_add_dma_alias(pdev, PCI_DEVFN(0x12, 0x3)); | |
3979 | } | |
3980 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2260, quirk_mic_x200_dma_alias); | |
3981 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2264, quirk_mic_x200_dma_alias); | |
3982 | ||
45a23293 J |
3983 | /* |
3984 | * The IOMMU and interrupt controller on Broadcom Vulcan/Cavium ThunderX2 are | |
3985 | * associated not at the root bus, but at a bridge below. This quirk avoids | |
3986 | * generating invalid DMA aliases. | |
3987 | */ | |
3988 | static void quirk_bridge_cavm_thrx2_pcie_root(struct pci_dev *pdev) | |
3989 | { | |
3990 | pdev->dev_flags |= PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT; | |
3991 | } | |
3992 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9000, | |
3993 | quirk_bridge_cavm_thrx2_pcie_root); | |
3994 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9084, | |
3995 | quirk_bridge_cavm_thrx2_pcie_root); | |
3996 | ||
3657cebd KHC |
3997 | /* |
3998 | * Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero) | |
3999 | * class code. Fix it. | |
4000 | */ | |
4001 | static void quirk_tw686x_class(struct pci_dev *pdev) | |
4002 | { | |
4003 | u32 class = pdev->class; | |
4004 | ||
4005 | /* Use "Multimedia controller" class */ | |
4006 | pdev->class = (PCI_CLASS_MULTIMEDIA_OTHER << 8) | 0x01; | |
4007 | dev_info(&pdev->dev, "TW686x PCI class overridden (%#08x -> %#08x)\n", | |
4008 | class, pdev->class); | |
4009 | } | |
2b4aed1d | 4010 | DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6864, PCI_CLASS_NOT_DEFINED, 8, |
3657cebd | 4011 | quirk_tw686x_class); |
2b4aed1d | 4012 | DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6865, PCI_CLASS_NOT_DEFINED, 8, |
3657cebd | 4013 | quirk_tw686x_class); |
2b4aed1d | 4014 | DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6868, PCI_CLASS_NOT_DEFINED, 8, |
3657cebd | 4015 | quirk_tw686x_class); |
2b4aed1d | 4016 | DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8, |
3657cebd KHC |
4017 | quirk_tw686x_class); |
4018 | ||
a99b646a | 4019 | /* |
4020 | * Some devices have problems with Transaction Layer Packets with the Relaxed | |
4021 | * Ordering Attribute set. Such devices should mark themselves and other | |
4022 | * Device Drivers should check before sending TLPs with RO set. | |
4023 | */ | |
4024 | static void quirk_relaxedordering_disable(struct pci_dev *dev) | |
4025 | { | |
4026 | dev->dev_flags |= PCI_DEV_FLAGS_NO_RELAXED_ORDERING; | |
4027 | dev_info(&dev->dev, "Disable Relaxed Ordering Attributes to avoid PCIe Completion erratum\n"); | |
4028 | } | |
4029 | ||
87e09cde | 4030 | /* |
4031 | * Intel Xeon processors based on Broadwell/Haswell microarchitecture Root | |
4032 | * Complex has a Flow Control Credit issue which can cause performance | |
4033 | * problems with Upstream Transaction Layer Packets with Relaxed Ordering set. | |
4034 | */ | |
4035 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f01, PCI_CLASS_NOT_DEFINED, 8, | |
4036 | quirk_relaxedordering_disable); | |
4037 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f02, PCI_CLASS_NOT_DEFINED, 8, | |
4038 | quirk_relaxedordering_disable); | |
4039 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f03, PCI_CLASS_NOT_DEFINED, 8, | |
4040 | quirk_relaxedordering_disable); | |
4041 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f04, PCI_CLASS_NOT_DEFINED, 8, | |
4042 | quirk_relaxedordering_disable); | |
4043 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f05, PCI_CLASS_NOT_DEFINED, 8, | |
4044 | quirk_relaxedordering_disable); | |
4045 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f06, PCI_CLASS_NOT_DEFINED, 8, | |
4046 | quirk_relaxedordering_disable); | |
4047 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f07, PCI_CLASS_NOT_DEFINED, 8, | |
4048 | quirk_relaxedordering_disable); | |
4049 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f08, PCI_CLASS_NOT_DEFINED, 8, | |
4050 | quirk_relaxedordering_disable); | |
4051 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f09, PCI_CLASS_NOT_DEFINED, 8, | |
4052 | quirk_relaxedordering_disable); | |
4053 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0a, PCI_CLASS_NOT_DEFINED, 8, | |
4054 | quirk_relaxedordering_disable); | |
4055 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0b, PCI_CLASS_NOT_DEFINED, 8, | |
4056 | quirk_relaxedordering_disable); | |
4057 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0c, PCI_CLASS_NOT_DEFINED, 8, | |
4058 | quirk_relaxedordering_disable); | |
4059 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0d, PCI_CLASS_NOT_DEFINED, 8, | |
4060 | quirk_relaxedordering_disable); | |
4061 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0e, PCI_CLASS_NOT_DEFINED, 8, | |
4062 | quirk_relaxedordering_disable); | |
4063 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f01, PCI_CLASS_NOT_DEFINED, 8, | |
4064 | quirk_relaxedordering_disable); | |
4065 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f02, PCI_CLASS_NOT_DEFINED, 8, | |
4066 | quirk_relaxedordering_disable); | |
4067 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f03, PCI_CLASS_NOT_DEFINED, 8, | |
4068 | quirk_relaxedordering_disable); | |
4069 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f04, PCI_CLASS_NOT_DEFINED, 8, | |
4070 | quirk_relaxedordering_disable); | |
4071 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f05, PCI_CLASS_NOT_DEFINED, 8, | |
4072 | quirk_relaxedordering_disable); | |
4073 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f06, PCI_CLASS_NOT_DEFINED, 8, | |
4074 | quirk_relaxedordering_disable); | |
4075 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f07, PCI_CLASS_NOT_DEFINED, 8, | |
4076 | quirk_relaxedordering_disable); | |
4077 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f08, PCI_CLASS_NOT_DEFINED, 8, | |
4078 | quirk_relaxedordering_disable); | |
4079 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f09, PCI_CLASS_NOT_DEFINED, 8, | |
4080 | quirk_relaxedordering_disable); | |
4081 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0a, PCI_CLASS_NOT_DEFINED, 8, | |
4082 | quirk_relaxedordering_disable); | |
4083 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0b, PCI_CLASS_NOT_DEFINED, 8, | |
4084 | quirk_relaxedordering_disable); | |
4085 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0c, PCI_CLASS_NOT_DEFINED, 8, | |
4086 | quirk_relaxedordering_disable); | |
4087 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0d, PCI_CLASS_NOT_DEFINED, 8, | |
4088 | quirk_relaxedordering_disable); | |
4089 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0e, PCI_CLASS_NOT_DEFINED, 8, | |
4090 | quirk_relaxedordering_disable); | |
4091 | ||
077fa19c | 4092 | /* |
4093 | * The AMD ARM A1100 (AKA "SEATTLE") SoC has a bug in its PCIe Root Complex | |
4094 | * where Upstream Transaction Layer Packets with the Relaxed Ordering | |
4095 | * Attribute clear are allowed to bypass earlier TLPs with Relaxed Ordering | |
4096 | * set. This is a violation of the PCIe 3.0 Transaction Ordering Rules | |
4097 | * outlined in Section 2.4.1 (PCI Express(r) Base Specification Revision 3.0 | |
4098 | * November 10, 2010). As a result, on this platform we can't use Relaxed | |
4099 | * Ordering for Upstream TLPs. | |
4100 | */ | |
4101 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a00, PCI_CLASS_NOT_DEFINED, 8, | |
4102 | quirk_relaxedordering_disable); | |
4103 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a01, PCI_CLASS_NOT_DEFINED, 8, | |
4104 | quirk_relaxedordering_disable); | |
4105 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a02, PCI_CLASS_NOT_DEFINED, 8, | |
4106 | quirk_relaxedordering_disable); | |
4107 | ||
c56d4450 HS |
4108 | /* |
4109 | * Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same | |
4110 | * values for the Attribute as were supplied in the header of the | |
4111 | * corresponding Request, except as explicitly allowed when IDO is used." | |
4112 | * | |
4113 | * If a non-compliant device generates a completion with a different | |
4114 | * attribute than the request, the receiver may accept it (which itself | |
4115 | * seems non-compliant based on sec 2.3.2), or it may handle it as a | |
4116 | * Malformed TLP or an Unexpected Completion, which will probably lead to a | |
4117 | * device access timeout. | |
4118 | * | |
4119 | * If the non-compliant device generates completions with zero attributes | |
4120 | * (instead of copying the attributes from the request), we can work around | |
4121 | * this by disabling the "Relaxed Ordering" and "No Snoop" attributes in | |
4122 | * upstream devices so they always generate requests with zero attributes. | |
4123 | * | |
4124 | * This affects other devices under the same Root Port, but since these | |
4125 | * attributes are performance hints, there should be no functional problem. | |
4126 | * | |
4127 | * Note that Configuration Space accesses are never supposed to have TLP | |
4128 | * Attributes, so we're safe waiting till after any Configuration Space | |
4129 | * accesses to do the Root Port fixup. | |
4130 | */ | |
4131 | static void quirk_disable_root_port_attributes(struct pci_dev *pdev) | |
4132 | { | |
4133 | struct pci_dev *root_port = pci_find_pcie_root_port(pdev); | |
4134 | ||
4135 | if (!root_port) { | |
4136 | dev_warn(&pdev->dev, "PCIe Completion erratum may cause device errors\n"); | |
4137 | return; | |
4138 | } | |
4139 | ||
4140 | dev_info(&root_port->dev, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n", | |
4141 | dev_name(&pdev->dev)); | |
4142 | pcie_capability_clear_and_set_word(root_port, PCI_EXP_DEVCTL, | |
4143 | PCI_EXP_DEVCTL_RELAX_EN | | |
4144 | PCI_EXP_DEVCTL_NOSNOOP_EN, 0); | |
4145 | } | |
4146 | ||
4147 | /* | |
4148 | * The Chelsio T5 chip fails to copy TLP Attributes from a Request to the | |
4149 | * Completion it generates. | |
4150 | */ | |
4151 | static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev) | |
4152 | { | |
4153 | /* | |
4154 | * This mask/compare operation selects for Physical Function 4 on a | |
4155 | * T5. We only need to fix up the Root Port once for any of the | |
4156 | * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely | |
4157 | * 0x54xx so we use that one, | |
4158 | */ | |
4159 | if ((pdev->device & 0xff00) == 0x5400) | |
4160 | quirk_disable_root_port_attributes(pdev); | |
4161 | } | |
4162 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, | |
4163 | quirk_chelsio_T5_disable_root_port_attributes); | |
4164 | ||
15b100df AW |
4165 | /* |
4166 | * AMD has indicated that the devices below do not support peer-to-peer | |
4167 | * in any system where they are found in the southbridge with an AMD | |
4168 | * IOMMU in the system. Multifunction devices that do not support | |
4169 | * peer-to-peer between functions can claim to support a subset of ACS. | |
4170 | * Such devices effectively enable request redirect (RR) and completion | |
4171 | * redirect (CR) since all transactions are redirected to the upstream | |
4172 | * root complex. | |
4173 | * | |
4174 | * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94086 | |
4175 | * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94102 | |
4176 | * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/99402 | |
4177 | * | |
4178 | * 1002:4385 SBx00 SMBus Controller | |
4179 | * 1002:439c SB7x0/SB8x0/SB9x0 IDE Controller | |
4180 | * 1002:4383 SBx00 Azalia (Intel HDA) | |
4181 | * 1002:439d SB7x0/SB8x0/SB9x0 LPC host controller | |
4182 | * 1002:4384 SBx00 PCI to PCI Bridge | |
4183 | * 1002:4399 SB7x0/SB8x0/SB9x0 USB OHCI2 Controller | |
3587e625 MR |
4184 | * |
4185 | * https://bugzilla.kernel.org/show_bug.cgi?id=81841#c15 | |
4186 | * | |
4187 | * 1022:780f [AMD] FCH PCI Bridge | |
4188 | * 1022:7809 [AMD] FCH USB OHCI Controller | |
15b100df AW |
4189 | */ |
4190 | static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags) | |
4191 | { | |
4192 | #ifdef CONFIG_ACPI | |
4193 | struct acpi_table_header *header = NULL; | |
4194 | acpi_status status; | |
4195 | ||
4196 | /* Targeting multifunction devices on the SB (appears on root bus) */ | |
4197 | if (!dev->multifunction || !pci_is_root_bus(dev->bus)) | |
4198 | return -ENODEV; | |
4199 | ||
4200 | /* The IVRS table describes the AMD IOMMU */ | |
4201 | status = acpi_get_table("IVRS", 0, &header); | |
4202 | if (ACPI_FAILURE(status)) | |
4203 | return -ENODEV; | |
4204 | ||
4205 | /* Filter out flags not applicable to multifunction */ | |
4206 | acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT); | |
4207 | ||
4208 | return acs_flags & ~(PCI_ACS_RR | PCI_ACS_CR) ? 0 : 1; | |
4209 | #else | |
4210 | return -ENODEV; | |
4211 | #endif | |
4212 | } | |
4213 | ||
b404bcfb MJ |
4214 | static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags) |
4215 | { | |
4216 | /* | |
4217 | * Cavium devices matching this quirk do not perform peer-to-peer | |
4218 | * with other functions, allowing masking out these bits as if they | |
4219 | * were unimplemented in the ACS capability. | |
4220 | */ | |
4221 | acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | | |
4222 | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); | |
4223 | ||
b77d537d MJ |
4224 | if (!((dev->device >= 0xa000) && (dev->device <= 0xa0ff))) |
4225 | return -ENOTTY; | |
4226 | ||
b404bcfb MJ |
4227 | return acs_flags ? 0 : 1; |
4228 | } | |
4229 | ||
a0418aa2 FK |
4230 | static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags) |
4231 | { | |
4232 | /* | |
4233 | * X-Gene root matching this quirk do not allow peer-to-peer | |
4234 | * transactions with others, allowing masking out these bits as if they | |
4235 | * were unimplemented in the ACS capability. | |
4236 | */ | |
4237 | acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); | |
4238 | ||
4239 | return acs_flags ? 0 : 1; | |
4240 | } | |
4241 | ||
d99321b6 AW |
4242 | /* |
4243 | * Many Intel PCH root ports do provide ACS-like features to disable peer | |
4244 | * transactions and validate bus numbers in requests, but do not provide an | |
4245 | * actual PCIe ACS capability. This is the list of device IDs known to fall | |
4246 | * into that category as provided by Intel in Red Hat bugzilla 1037684. | |
4247 | */ | |
4248 | static const u16 pci_quirk_intel_pch_acs_ids[] = { | |
4249 | /* Ibexpeak PCH */ | |
4250 | 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49, | |
4251 | 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51, | |
4252 | /* Cougarpoint PCH */ | |
4253 | 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17, | |
4254 | 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f, | |
4255 | /* Pantherpoint PCH */ | |
4256 | 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17, | |
4257 | 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f, | |
4258 | /* Lynxpoint-H PCH */ | |
4259 | 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17, | |
4260 | 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f, | |
4261 | /* Lynxpoint-LP PCH */ | |
4262 | 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17, | |
4263 | 0x9c18, 0x9c19, 0x9c1a, 0x9c1b, | |
4264 | /* Wildcat PCH */ | |
4265 | 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97, | |
4266 | 0x9c98, 0x9c99, 0x9c9a, 0x9c9b, | |
1a30fd0d AW |
4267 | /* Patsburg (X79) PCH */ |
4268 | 0x1d10, 0x1d12, 0x1d14, 0x1d16, 0x1d18, 0x1d1a, 0x1d1c, 0x1d1e, | |
78e88358 AW |
4269 | /* Wellsburg (X99) PCH */ |
4270 | 0x8d10, 0x8d11, 0x8d12, 0x8d13, 0x8d14, 0x8d15, 0x8d16, 0x8d17, | |
4271 | 0x8d18, 0x8d19, 0x8d1a, 0x8d1b, 0x8d1c, 0x8d1d, 0x8d1e, | |
dca230d1 AW |
4272 | /* Lynx Point (9 series) PCH */ |
4273 | 0x8c90, 0x8c92, 0x8c94, 0x8c96, 0x8c98, 0x8c9a, 0x8c9c, 0x8c9e, | |
d99321b6 AW |
4274 | }; |
4275 | ||
4276 | static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev) | |
4277 | { | |
4278 | int i; | |
4279 | ||
4280 | /* Filter out a few obvious non-matches first */ | |
4281 | if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) | |
4282 | return false; | |
4283 | ||
4284 | for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++) | |
4285 | if (pci_quirk_intel_pch_acs_ids[i] == dev->device) | |
4286 | return true; | |
4287 | ||
4288 | return false; | |
4289 | } | |
4290 | ||
4291 | #define INTEL_PCH_ACS_FLAGS (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV) | |
4292 | ||
4293 | static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags) | |
4294 | { | |
4295 | u16 flags = dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK ? | |
4296 | INTEL_PCH_ACS_FLAGS : 0; | |
4297 | ||
4298 | if (!pci_quirk_intel_pch_acs_match(dev)) | |
4299 | return -ENOTTY; | |
4300 | ||
4301 | return acs_flags & ~flags ? 0 : 1; | |
4302 | } | |
4303 | ||
33be632b SK |
4304 | /* |
4305 | * These QCOM root ports do provide ACS-like features to disable peer | |
4306 | * transactions and validate bus numbers in requests, but do not provide an | |
4307 | * actual PCIe ACS capability. Hardware supports source validation but it | |
4308 | * will report the issue as Completer Abort instead of ACS Violation. | |
4309 | * Hardware doesn't support peer-to-peer and each root port is a root | |
4310 | * complex with unique segment numbers. It is not possible for one root | |
4311 | * port to pass traffic to another root port. All PCIe transactions are | |
4312 | * terminated inside the root port. | |
4313 | */ | |
4314 | static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags) | |
4315 | { | |
4316 | u16 flags = (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV); | |
4317 | int ret = acs_flags & ~flags ? 0 : 1; | |
4318 | ||
4319 | dev_info(&dev->dev, "Using QCOM ACS Quirk (%d)\n", ret); | |
4320 | ||
4321 | return ret; | |
4322 | } | |
4323 | ||
1bf2bf22 AW |
4324 | /* |
4325 | * Sunrise Point PCH root ports implement ACS, but unfortunately as shown in | |
4326 | * the datasheet (Intel 100 Series Chipset Family PCH Datasheet, Vol. 2, | |
4327 | * 12.1.46, 12.1.47)[1] this chipset uses dwords for the ACS capability and | |
4328 | * control registers whereas the PCIe spec packs them into words (Rev 3.0, | |
4329 | * 7.16 ACS Extended Capability). The bit definitions are correct, but the | |
4330 | * control register is at offset 8 instead of 6 and we should probably use | |
4331 | * dword accesses to them. This applies to the following PCI Device IDs, as | |
4332 | * found in volume 1 of the datasheet[2]: | |
4333 | * | |
4334 | * 0xa110-0xa11f Sunrise Point-H PCI Express Root Port #{0-16} | |
4335 | * 0xa167-0xa16a Sunrise Point-H PCI Express Root Port #{17-20} | |
4336 | * | |
4337 | * N.B. This doesn't fix what lspci shows. | |
4338 | * | |
7184f5b4 AW |
4339 | * The 100 series chipset specification update includes this as errata #23[3]. |
4340 | * | |
4341 | * The 200 series chipset (Union Point) has the same bug according to the | |
4342 | * specification update (Intel 200 Series Chipset Family Platform Controller | |
4343 | * Hub, Specification Update, January 2017, Revision 001, Document# 335194-001, | |
4344 | * Errata 22)[4]. Per the datasheet[5], root port PCI Device IDs for this | |
4345 | * chipset include: | |
4346 | * | |
4347 | * 0xa290-0xa29f PCI Express Root port #{0-16} | |
4348 | * 0xa2e7-0xa2ee PCI Express Root port #{17-24} | |
4349 | * | |
1bf2bf22 AW |
4350 | * [1] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-2.html |
4351 | * [2] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-1.html | |
7184f5b4 AW |
4352 | * [3] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-spec-update.html |
4353 | * [4] http://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-spec-update.html | |
4354 | * [5] http://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-datasheet-vol-1.html | |
1bf2bf22 AW |
4355 | */ |
4356 | static bool pci_quirk_intel_spt_pch_acs_match(struct pci_dev *dev) | |
4357 | { | |
7184f5b4 AW |
4358 | if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) |
4359 | return false; | |
4360 | ||
4361 | switch (dev->device) { | |
4362 | case 0xa110 ... 0xa11f: case 0xa167 ... 0xa16a: /* Sunrise Point */ | |
4363 | case 0xa290 ... 0xa29f: case 0xa2e7 ... 0xa2ee: /* Union Point */ | |
4364 | return true; | |
4365 | } | |
4366 | ||
4367 | return false; | |
1bf2bf22 AW |
4368 | } |
4369 | ||
4370 | #define INTEL_SPT_ACS_CTRL (PCI_ACS_CAP + 4) | |
4371 | ||
4372 | static int pci_quirk_intel_spt_pch_acs(struct pci_dev *dev, u16 acs_flags) | |
4373 | { | |
4374 | int pos; | |
4375 | u32 cap, ctrl; | |
4376 | ||
4377 | if (!pci_quirk_intel_spt_pch_acs_match(dev)) | |
4378 | return -ENOTTY; | |
4379 | ||
4380 | pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); | |
4381 | if (!pos) | |
4382 | return -ENOTTY; | |
4383 | ||
4384 | /* see pci_acs_flags_enabled() */ | |
4385 | pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap); | |
4386 | acs_flags &= (cap | PCI_ACS_EC); | |
4387 | ||
4388 | pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl); | |
4389 | ||
4390 | return acs_flags & ~ctrl ? 0 : 1; | |
4391 | } | |
4392 | ||
100ebb2c | 4393 | static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags) |
89b51cb5 AW |
4394 | { |
4395 | /* | |
4396 | * SV, TB, and UF are not relevant to multifunction endpoints. | |
4397 | * | |
100ebb2c AW |
4398 | * Multifunction devices are only required to implement RR, CR, and DT |
4399 | * in their ACS capability if they support peer-to-peer transactions. | |
4400 | * Devices matching this quirk have been verified by the vendor to not | |
4401 | * perform peer-to-peer with other functions, allowing us to mask out | |
4402 | * these bits as if they were unimplemented in the ACS capability. | |
89b51cb5 AW |
4403 | */ |
4404 | acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | | |
4405 | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); | |
4406 | ||
4407 | return acs_flags ? 0 : 1; | |
4408 | } | |
4409 | ||
ad805758 AW |
4410 | static const struct pci_dev_acs_enabled { |
4411 | u16 vendor; | |
4412 | u16 device; | |
4413 | int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags); | |
4414 | } pci_dev_acs_enabled[] = { | |
15b100df AW |
4415 | { PCI_VENDOR_ID_ATI, 0x4385, pci_quirk_amd_sb_acs }, |
4416 | { PCI_VENDOR_ID_ATI, 0x439c, pci_quirk_amd_sb_acs }, | |
4417 | { PCI_VENDOR_ID_ATI, 0x4383, pci_quirk_amd_sb_acs }, | |
4418 | { PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs }, | |
4419 | { PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs }, | |
4420 | { PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs }, | |
3587e625 MR |
4421 | { PCI_VENDOR_ID_AMD, 0x780f, pci_quirk_amd_sb_acs }, |
4422 | { PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs }, | |
100ebb2c AW |
4423 | { PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs }, |
4424 | { PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs }, | |
9fad4012 | 4425 | { PCI_VENDOR_ID_SOLARFLARE, 0x0A03, pci_quirk_mf_endpoint_acs }, |
100ebb2c AW |
4426 | { PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs }, |
4427 | { PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs }, | |
4428 | { PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs }, | |
4429 | { PCI_VENDOR_ID_INTEL, 0x10E1, pci_quirk_mf_endpoint_acs }, | |
4430 | { PCI_VENDOR_ID_INTEL, 0x10F1, pci_quirk_mf_endpoint_acs }, | |
4431 | { PCI_VENDOR_ID_INTEL, 0x10F7, pci_quirk_mf_endpoint_acs }, | |
4432 | { PCI_VENDOR_ID_INTEL, 0x10F8, pci_quirk_mf_endpoint_acs }, | |
4433 | { PCI_VENDOR_ID_INTEL, 0x10F9, pci_quirk_mf_endpoint_acs }, | |
4434 | { PCI_VENDOR_ID_INTEL, 0x10FA, pci_quirk_mf_endpoint_acs }, | |
4435 | { PCI_VENDOR_ID_INTEL, 0x10FB, pci_quirk_mf_endpoint_acs }, | |
4436 | { PCI_VENDOR_ID_INTEL, 0x10FC, pci_quirk_mf_endpoint_acs }, | |
4437 | { PCI_VENDOR_ID_INTEL, 0x1507, pci_quirk_mf_endpoint_acs }, | |
4438 | { PCI_VENDOR_ID_INTEL, 0x1514, pci_quirk_mf_endpoint_acs }, | |
4439 | { PCI_VENDOR_ID_INTEL, 0x151C, pci_quirk_mf_endpoint_acs }, | |
4440 | { PCI_VENDOR_ID_INTEL, 0x1529, pci_quirk_mf_endpoint_acs }, | |
4441 | { PCI_VENDOR_ID_INTEL, 0x152A, pci_quirk_mf_endpoint_acs }, | |
4442 | { PCI_VENDOR_ID_INTEL, 0x154D, pci_quirk_mf_endpoint_acs }, | |
4443 | { PCI_VENDOR_ID_INTEL, 0x154F, pci_quirk_mf_endpoint_acs }, | |
4444 | { PCI_VENDOR_ID_INTEL, 0x1551, pci_quirk_mf_endpoint_acs }, | |
4445 | { PCI_VENDOR_ID_INTEL, 0x1558, pci_quirk_mf_endpoint_acs }, | |
d748804f AW |
4446 | /* 82580 */ |
4447 | { PCI_VENDOR_ID_INTEL, 0x1509, pci_quirk_mf_endpoint_acs }, | |
4448 | { PCI_VENDOR_ID_INTEL, 0x150E, pci_quirk_mf_endpoint_acs }, | |
4449 | { PCI_VENDOR_ID_INTEL, 0x150F, pci_quirk_mf_endpoint_acs }, | |
4450 | { PCI_VENDOR_ID_INTEL, 0x1510, pci_quirk_mf_endpoint_acs }, | |
4451 | { PCI_VENDOR_ID_INTEL, 0x1511, pci_quirk_mf_endpoint_acs }, | |
4452 | { PCI_VENDOR_ID_INTEL, 0x1516, pci_quirk_mf_endpoint_acs }, | |
4453 | { PCI_VENDOR_ID_INTEL, 0x1527, pci_quirk_mf_endpoint_acs }, | |
4454 | /* 82576 */ | |
4455 | { PCI_VENDOR_ID_INTEL, 0x10C9, pci_quirk_mf_endpoint_acs }, | |
4456 | { PCI_VENDOR_ID_INTEL, 0x10E6, pci_quirk_mf_endpoint_acs }, | |
4457 | { PCI_VENDOR_ID_INTEL, 0x10E7, pci_quirk_mf_endpoint_acs }, | |
4458 | { PCI_VENDOR_ID_INTEL, 0x10E8, pci_quirk_mf_endpoint_acs }, | |
4459 | { PCI_VENDOR_ID_INTEL, 0x150A, pci_quirk_mf_endpoint_acs }, | |
4460 | { PCI_VENDOR_ID_INTEL, 0x150D, pci_quirk_mf_endpoint_acs }, | |
4461 | { PCI_VENDOR_ID_INTEL, 0x1518, pci_quirk_mf_endpoint_acs }, | |
4462 | { PCI_VENDOR_ID_INTEL, 0x1526, pci_quirk_mf_endpoint_acs }, | |
4463 | /* 82575 */ | |
4464 | { PCI_VENDOR_ID_INTEL, 0x10A7, pci_quirk_mf_endpoint_acs }, | |
4465 | { PCI_VENDOR_ID_INTEL, 0x10A9, pci_quirk_mf_endpoint_acs }, | |
4466 | { PCI_VENDOR_ID_INTEL, 0x10D6, pci_quirk_mf_endpoint_acs }, | |
4467 | /* I350 */ | |
4468 | { PCI_VENDOR_ID_INTEL, 0x1521, pci_quirk_mf_endpoint_acs }, | |
4469 | { PCI_VENDOR_ID_INTEL, 0x1522, pci_quirk_mf_endpoint_acs }, | |
4470 | { PCI_VENDOR_ID_INTEL, 0x1523, pci_quirk_mf_endpoint_acs }, | |
4471 | { PCI_VENDOR_ID_INTEL, 0x1524, pci_quirk_mf_endpoint_acs }, | |
4472 | /* 82571 (Quads omitted due to non-ACS switch) */ | |
4473 | { PCI_VENDOR_ID_INTEL, 0x105E, pci_quirk_mf_endpoint_acs }, | |
4474 | { PCI_VENDOR_ID_INTEL, 0x105F, pci_quirk_mf_endpoint_acs }, | |
4475 | { PCI_VENDOR_ID_INTEL, 0x1060, pci_quirk_mf_endpoint_acs }, | |
4476 | { PCI_VENDOR_ID_INTEL, 0x10D9, pci_quirk_mf_endpoint_acs }, | |
95e16587 AW |
4477 | /* I219 */ |
4478 | { PCI_VENDOR_ID_INTEL, 0x15b7, pci_quirk_mf_endpoint_acs }, | |
4479 | { PCI_VENDOR_ID_INTEL, 0x15b8, pci_quirk_mf_endpoint_acs }, | |
33be632b SK |
4480 | /* QCOM QDF2xxx root ports */ |
4481 | { 0x17cb, 0x400, pci_quirk_qcom_rp_acs }, | |
4482 | { 0x17cb, 0x401, pci_quirk_qcom_rp_acs }, | |
d748804f | 4483 | /* Intel PCH root ports */ |
d99321b6 | 4484 | { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs }, |
1bf2bf22 | 4485 | { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_spt_pch_acs }, |
6a3763d1 VV |
4486 | { 0x19a2, 0x710, pci_quirk_mf_endpoint_acs }, /* Emulex BE3-R */ |
4487 | { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */ | |
b404bcfb MJ |
4488 | /* Cavium ThunderX */ |
4489 | { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs }, | |
a0418aa2 FK |
4490 | /* APM X-Gene */ |
4491 | { PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs }, | |
ad805758 AW |
4492 | { 0 } |
4493 | }; | |
4494 | ||
4495 | int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags) | |
4496 | { | |
4497 | const struct pci_dev_acs_enabled *i; | |
4498 | int ret; | |
4499 | ||
4500 | /* | |
4501 | * Allow devices that do not expose standard PCIe ACS capabilities | |
4502 | * or control to indicate their support here. Multi-function express | |
4503 | * devices which do not allow internal peer-to-peer between functions, | |
4504 | * but do not implement PCIe ACS may wish to return true here. | |
4505 | */ | |
4506 | for (i = pci_dev_acs_enabled; i->acs_enabled; i++) { | |
4507 | if ((i->vendor == dev->vendor || | |
4508 | i->vendor == (u16)PCI_ANY_ID) && | |
4509 | (i->device == dev->device || | |
4510 | i->device == (u16)PCI_ANY_ID)) { | |
4511 | ret = i->acs_enabled(dev, acs_flags); | |
4512 | if (ret >= 0) | |
4513 | return ret; | |
4514 | } | |
4515 | } | |
4516 | ||
4517 | return -ENOTTY; | |
4518 | } | |
2c744244 | 4519 | |
d99321b6 AW |
4520 | /* Config space offset of Root Complex Base Address register */ |
4521 | #define INTEL_LPC_RCBA_REG 0xf0 | |
4522 | /* 31:14 RCBA address */ | |
4523 | #define INTEL_LPC_RCBA_MASK 0xffffc000 | |
4524 | /* RCBA Enable */ | |
4525 | #define INTEL_LPC_RCBA_ENABLE (1 << 0) | |
4526 | ||
4527 | /* Backbone Scratch Pad Register */ | |
4528 | #define INTEL_BSPR_REG 0x1104 | |
4529 | /* Backbone Peer Non-Posted Disable */ | |
4530 | #define INTEL_BSPR_REG_BPNPD (1 << 8) | |
4531 | /* Backbone Peer Posted Disable */ | |
4532 | #define INTEL_BSPR_REG_BPPD (1 << 9) | |
4533 | ||
4534 | /* Upstream Peer Decode Configuration Register */ | |
4535 | #define INTEL_UPDCR_REG 0x1114 | |
4536 | /* 5:0 Peer Decode Enable bits */ | |
4537 | #define INTEL_UPDCR_REG_MASK 0x3f | |
4538 | ||
4539 | static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev) | |
4540 | { | |
4541 | u32 rcba, bspr, updcr; | |
4542 | void __iomem *rcba_mem; | |
4543 | ||
4544 | /* | |
4545 | * Read the RCBA register from the LPC (D31:F0). PCH root ports | |
4546 | * are D28:F* and therefore get probed before LPC, thus we can't | |
4547 | * use pci_get_slot/pci_read_config_dword here. | |
4548 | */ | |
4549 | pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0), | |
4550 | INTEL_LPC_RCBA_REG, &rcba); | |
4551 | if (!(rcba & INTEL_LPC_RCBA_ENABLE)) | |
4552 | return -EINVAL; | |
4553 | ||
4554 | rcba_mem = ioremap_nocache(rcba & INTEL_LPC_RCBA_MASK, | |
4555 | PAGE_ALIGN(INTEL_UPDCR_REG)); | |
4556 | if (!rcba_mem) | |
4557 | return -ENOMEM; | |
4558 | ||
4559 | /* | |
4560 | * The BSPR can disallow peer cycles, but it's set by soft strap and | |
4561 | * therefore read-only. If both posted and non-posted peer cycles are | |
4562 | * disallowed, we're ok. If either are allowed, then we need to use | |
4563 | * the UPDCR to disable peer decodes for each port. This provides the | |
4564 | * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | |
4565 | */ | |
4566 | bspr = readl(rcba_mem + INTEL_BSPR_REG); | |
4567 | bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD; | |
4568 | if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) { | |
4569 | updcr = readl(rcba_mem + INTEL_UPDCR_REG); | |
4570 | if (updcr & INTEL_UPDCR_REG_MASK) { | |
4571 | dev_info(&dev->dev, "Disabling UPDCR peer decodes\n"); | |
4572 | updcr &= ~INTEL_UPDCR_REG_MASK; | |
4573 | writel(updcr, rcba_mem + INTEL_UPDCR_REG); | |
4574 | } | |
4575 | } | |
4576 | ||
4577 | iounmap(rcba_mem); | |
4578 | return 0; | |
4579 | } | |
4580 | ||
4581 | /* Miscellaneous Port Configuration register */ | |
4582 | #define INTEL_MPC_REG 0xd8 | |
4583 | /* MPC: Invalid Receive Bus Number Check Enable */ | |
4584 | #define INTEL_MPC_REG_IRBNCE (1 << 26) | |
4585 | ||
4586 | static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev) | |
4587 | { | |
4588 | u32 mpc; | |
4589 | ||
4590 | /* | |
4591 | * When enabled, the IRBNCE bit of the MPC register enables the | |
4592 | * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which | |
4593 | * ensures that requester IDs fall within the bus number range | |
4594 | * of the bridge. Enable if not already. | |
4595 | */ | |
4596 | pci_read_config_dword(dev, INTEL_MPC_REG, &mpc); | |
4597 | if (!(mpc & INTEL_MPC_REG_IRBNCE)) { | |
4598 | dev_info(&dev->dev, "Enabling MPC IRBNCE\n"); | |
4599 | mpc |= INTEL_MPC_REG_IRBNCE; | |
4600 | pci_write_config_word(dev, INTEL_MPC_REG, mpc); | |
4601 | } | |
4602 | } | |
4603 | ||
4604 | static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev) | |
4605 | { | |
4606 | if (!pci_quirk_intel_pch_acs_match(dev)) | |
4607 | return -ENOTTY; | |
4608 | ||
4609 | if (pci_quirk_enable_intel_lpc_acs(dev)) { | |
4610 | dev_warn(&dev->dev, "Failed to enable Intel PCH ACS quirk\n"); | |
4611 | return 0; | |
4612 | } | |
4613 | ||
4614 | pci_quirk_enable_intel_rp_mpc_acs(dev); | |
4615 | ||
4616 | dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK; | |
4617 | ||
4618 | dev_info(&dev->dev, "Intel PCH root port ACS workaround enabled\n"); | |
4619 | ||
4620 | return 0; | |
4621 | } | |
4622 | ||
1bf2bf22 AW |
4623 | static int pci_quirk_enable_intel_spt_pch_acs(struct pci_dev *dev) |
4624 | { | |
4625 | int pos; | |
4626 | u32 cap, ctrl; | |
4627 | ||
4628 | if (!pci_quirk_intel_spt_pch_acs_match(dev)) | |
4629 | return -ENOTTY; | |
4630 | ||
4631 | pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); | |
4632 | if (!pos) | |
4633 | return -ENOTTY; | |
4634 | ||
4635 | pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap); | |
4636 | pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl); | |
4637 | ||
4638 | ctrl |= (cap & PCI_ACS_SV); | |
4639 | ctrl |= (cap & PCI_ACS_RR); | |
4640 | ctrl |= (cap & PCI_ACS_CR); | |
4641 | ctrl |= (cap & PCI_ACS_UF); | |
4642 | ||
4643 | pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl); | |
4644 | ||
4645 | dev_info(&dev->dev, "Intel SPT PCH root port ACS workaround enabled\n"); | |
4646 | ||
4647 | return 0; | |
4648 | } | |
4649 | ||
2c744244 AW |
4650 | static const struct pci_dev_enable_acs { |
4651 | u16 vendor; | |
4652 | u16 device; | |
4653 | int (*enable_acs)(struct pci_dev *dev); | |
4654 | } pci_dev_enable_acs[] = { | |
d99321b6 | 4655 | { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_pch_acs }, |
1bf2bf22 | 4656 | { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_spt_pch_acs }, |
2c744244 AW |
4657 | { 0 } |
4658 | }; | |
4659 | ||
c1d61c9b | 4660 | int pci_dev_specific_enable_acs(struct pci_dev *dev) |
2c744244 AW |
4661 | { |
4662 | const struct pci_dev_enable_acs *i; | |
4663 | int ret; | |
4664 | ||
4665 | for (i = pci_dev_enable_acs; i->enable_acs; i++) { | |
4666 | if ((i->vendor == dev->vendor || | |
4667 | i->vendor == (u16)PCI_ANY_ID) && | |
4668 | (i->device == dev->device || | |
4669 | i->device == (u16)PCI_ANY_ID)) { | |
4670 | ret = i->enable_acs(dev); | |
4671 | if (ret >= 0) | |
c1d61c9b | 4672 | return ret; |
2c744244 AW |
4673 | } |
4674 | } | |
c1d61c9b AW |
4675 | |
4676 | return -ENOTTY; | |
2c744244 | 4677 | } |
3388a614 TS |
4678 | |
4679 | /* | |
4680 | * The PCI capabilities list for Intel DH895xCC VFs (device id 0x0443) with | |
4681 | * QuickAssist Technology (QAT) is prematurely terminated in hardware. The | |
4682 | * Next Capability pointer in the MSI Capability Structure should point to | |
4683 | * the PCIe Capability Structure but is incorrectly hardwired as 0 terminating | |
4684 | * the list. | |
4685 | */ | |
4686 | static void quirk_intel_qat_vf_cap(struct pci_dev *pdev) | |
4687 | { | |
4688 | int pos, i = 0; | |
4689 | u8 next_cap; | |
4690 | u16 reg16, *cap; | |
4691 | struct pci_cap_saved_state *state; | |
4692 | ||
4693 | /* Bail if the hardware bug is fixed */ | |
4694 | if (pdev->pcie_cap || pci_find_capability(pdev, PCI_CAP_ID_EXP)) | |
4695 | return; | |
4696 | ||
4697 | /* Bail if MSI Capability Structure is not found for some reason */ | |
4698 | pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); | |
4699 | if (!pos) | |
4700 | return; | |
4701 | ||
4702 | /* | |
4703 | * Bail if Next Capability pointer in the MSI Capability Structure | |
4704 | * is not the expected incorrect 0x00. | |
4705 | */ | |
4706 | pci_read_config_byte(pdev, pos + 1, &next_cap); | |
4707 | if (next_cap) | |
4708 | return; | |
4709 | ||
4710 | /* | |
4711 | * PCIe Capability Structure is expected to be at 0x50 and should | |
4712 | * terminate the list (Next Capability pointer is 0x00). Verify | |
4713 | * Capability Id and Next Capability pointer is as expected. | |
4714 | * Open-code some of set_pcie_port_type() and pci_cfg_space_size_ext() | |
4715 | * to correctly set kernel data structures which have already been | |
4716 | * set incorrectly due to the hardware bug. | |
4717 | */ | |
4718 | pos = 0x50; | |
4719 | pci_read_config_word(pdev, pos, ®16); | |
4720 | if (reg16 == (0x0000 | PCI_CAP_ID_EXP)) { | |
4721 | u32 status; | |
4722 | #ifndef PCI_EXP_SAVE_REGS | |
4723 | #define PCI_EXP_SAVE_REGS 7 | |
4724 | #endif | |
4725 | int size = PCI_EXP_SAVE_REGS * sizeof(u16); | |
4726 | ||
4727 | pdev->pcie_cap = pos; | |
4728 | pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); | |
4729 | pdev->pcie_flags_reg = reg16; | |
4730 | pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16); | |
4731 | pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD; | |
4732 | ||
4733 | pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE; | |
4734 | if (pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status) != | |
4735 | PCIBIOS_SUCCESSFUL || (status == 0xffffffff)) | |
4736 | pdev->cfg_size = PCI_CFG_SPACE_SIZE; | |
4737 | ||
4738 | if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP)) | |
4739 | return; | |
4740 | ||
4741 | /* | |
4742 | * Save PCIE cap | |
4743 | */ | |
4744 | state = kzalloc(sizeof(*state) + size, GFP_KERNEL); | |
4745 | if (!state) | |
4746 | return; | |
4747 | ||
4748 | state->cap.cap_nr = PCI_CAP_ID_EXP; | |
4749 | state->cap.cap_extended = 0; | |
4750 | state->cap.size = size; | |
4751 | cap = (u16 *)&state->cap.data[0]; | |
4752 | pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap[i++]); | |
4753 | pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &cap[i++]); | |
4754 | pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &cap[i++]); | |
4755 | pcie_capability_read_word(pdev, PCI_EXP_RTCTL, &cap[i++]); | |
4756 | pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap[i++]); | |
4757 | pcie_capability_read_word(pdev, PCI_EXP_LNKCTL2, &cap[i++]); | |
4758 | pcie_capability_read_word(pdev, PCI_EXP_SLTCTL2, &cap[i++]); | |
4759 | hlist_add_head(&state->next, &pdev->saved_cap_space); | |
4760 | } | |
4761 | } | |
4762 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap); | |
443b40ba | 4763 | |
f65fd1aa SN |
4764 | /* FLR may cause some 82579 devices to hang. */ |
4765 | static void quirk_intel_no_flr(struct pci_dev *dev) | |
4766 | { | |
4767 | dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET; | |
4768 | } | |
4769 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_intel_no_flr); | |
4770 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_intel_no_flr); | |
62ce94a7 SK |
4771 | |
4772 | static void quirk_no_ext_tags(struct pci_dev *pdev) | |
4773 | { | |
4774 | struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); | |
4775 | ||
4776 | if (!bridge) | |
4777 | return; | |
4778 | ||
4779 | bridge->no_ext_tags = 1; | |
4780 | dev_info(&pdev->dev, "disabling Extended Tags (this device can't handle them)\n"); | |
4781 | ||
4782 | pci_walk_bus(bridge->bus, pci_configure_extended_tags, NULL); | |
4783 | } | |
4784 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0140, quirk_no_ext_tags); | |
4785 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0142, quirk_no_ext_tags); | |
4786 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0144, quirk_no_ext_tags); | |
cf2d8041 | 4787 | |
9b44b0b0 JR |
4788 | #ifdef CONFIG_PCI_ATS |
4789 | /* | |
4790 | * Some devices have a broken ATS implementation causing IOMMU stalls. | |
4791 | * Don't use ATS for those devices. | |
4792 | */ | |
4793 | static void quirk_no_ats(struct pci_dev *pdev) | |
4794 | { | |
4795 | dev_info(&pdev->dev, "disabling ATS (broken on this device)\n"); | |
4796 | pdev->ats_cap = 0; | |
4797 | } | |
4798 | ||
4799 | /* AMD Stoney platform GPU */ | |
4800 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x98e4, quirk_no_ats); | |
4801 | #endif /* CONFIG_PCI_ATS */ |