]>
Commit | Line | Data |
---|---|---|
1da177e4 | 1 | # |
bf45d9b0 | 2 | # PCCARD (PCMCIA/CardBus) bus subsystem configuration |
1da177e4 LT |
3 | # |
4 | ||
42c5323c | 5 | menuconfig PCCARD |
1da177e4 | 6 | tristate "PCCard (PCMCIA/CardBus) support" |
1da177e4 LT |
7 | ---help--- |
8 | Say Y here if you want to attach PCMCIA- or PC-cards to your Linux | |
9 | computer. These are credit-card size devices such as network cards, | |
10 | modems or hard drives often used with laptops computers. There are | |
9a5555b8 DB |
11 | actually two varieties of these cards: 16 bit PCMCIA and 32 bit |
12 | CardBus cards. | |
1da177e4 LT |
13 | |
14 | To compile this driver as modules, choose M here: the | |
15 | module will be called pcmcia_core. | |
16 | ||
17 | if PCCARD | |
18 | ||
1da177e4 LT |
19 | config PCMCIA |
20 | tristate "16-bit PCMCIA support" | |
f861bd23 | 21 | select CRC32 |
1da177e4 LT |
22 | default y |
23 | ---help--- | |
24 | This option enables support for 16-bit PCMCIA cards. Most older | |
25 | PC-cards are such 16-bit PCMCIA cards, so unless you know you're | |
26 | only using 32-bit CardBus cards, say Y or M here. | |
27 | ||
9a5555b8 DB |
28 | To use 16-bit PCMCIA cards, you will need supporting software in |
29 | most cases. (see the file <file:Documentation/Changes> for | |
30 | location and details). | |
1da177e4 LT |
31 | |
32 | To compile this driver as modules, choose M here: the | |
33 | module will be called pcmcia. | |
34 | ||
35 | If unsure, say Y. | |
36 | ||
daa9517d | 37 | config PCMCIA_LOAD_CIS |
204911fb KC |
38 | bool "Load CIS updates from userspace" |
39 | depends on PCMCIA | |
daa9517d DB |
40 | select FW_LOADER |
41 | default y | |
42 | help | |
43 | Some PCMCIA cards require an updated Card Information Structure (CIS) | |
44 | to be loaded from userspace to work correctly. If you say Y here, | |
45 | and your userspace is arranged correctly, this will be loaded | |
46 | automatically using the in-kernel firmware loader and the hotplug | |
47 | subsystem, instead of relying on cardmgr from pcmcia-cs to do so. | |
48 | ||
49 | If unsure, say Y. | |
50 | ||
1da177e4 | 51 | config CARDBUS |
9fea84f4 | 52 | bool "32-bit CardBus support" |
1da177e4 LT |
53 | depends on PCI |
54 | default y | |
55 | ---help--- | |
56 | CardBus is a bus mastering architecture for PC-cards, which allows | |
57 | for 32 bit PC-cards (the original PCMCIA standard specifies only | |
58 | a 16 bit wide bus). Many newer PC-cards are actually CardBus cards. | |
59 | ||
60 | To use 32 bit PC-cards, you also need a CardBus compatible host | |
61 | bridge. Virtually all modern PCMCIA bridges do this, and most of | |
62 | them are "yenta-compatible", so say Y or M there, too. | |
63 | ||
64 | If unsure, say Y. | |
65 | ||
66 | comment "PC-card bridges" | |
67 | ||
68 | config YENTA | |
69 | tristate "CardBus yenta-compatible bridge support" | |
89b39f5d | 70 | depends on PCI |
6a108a14 | 71 | select CARDBUS if !EXPERT |
02b03846 AC |
72 | select PCCARD_NONSTATIC if PCMCIA != n && ISA |
73 | select PCCARD_PCI if PCMCIA !=n && !ISA | |
1da177e4 LT |
74 | ---help--- |
75 | This option enables support for CardBus host bridges. Virtually | |
9fea84f4 DB |
76 | all modern PCMCIA bridges are CardBus compatible. A "bridge" is |
77 | the hardware inside your computer that PCMCIA cards are plugged | |
1da177e4 LT |
78 | into. |
79 | ||
80 | To compile this driver as modules, choose M here: the | |
81 | module will be called yenta_socket. | |
82 | ||
83 | If unsure, say Y. | |
84 | ||
63e7ebd0 DR |
85 | config YENTA_O2 |
86 | default y | |
6a108a14 | 87 | bool "Special initialization for O2Micro bridges" if EXPERT |
63e7ebd0 DR |
88 | depends on YENTA |
89 | ||
90 | config YENTA_RICOH | |
91 | default y | |
6a108a14 | 92 | bool "Special initialization for Ricoh bridges" if EXPERT |
63e7ebd0 DR |
93 | depends on YENTA |
94 | ||
95 | config YENTA_TI | |
96 | default y | |
6a108a14 | 97 | bool "Special initialization for TI and EnE bridges" if EXPERT |
63e7ebd0 DR |
98 | depends on YENTA |
99 | ||
100 | config YENTA_ENE_TUNE | |
101 | default y | |
6a108a14 | 102 | bool "Auto-tune EnE bridges for CB cards" if EXPERT |
63e7ebd0 DR |
103 | depends on YENTA_TI && CARDBUS |
104 | ||
105 | config YENTA_TOSHIBA | |
106 | default y | |
6a108a14 | 107 | bool "Special initialization for Toshiba ToPIC bridges" if EXPERT |
63e7ebd0 DR |
108 | depends on YENTA |
109 | ||
1da177e4 LT |
110 | config PD6729 |
111 | tristate "Cirrus PD6729 compatible bridge support" | |
112 | depends on PCMCIA && PCI | |
02b03846 AC |
113 | select PCCARD_NONSTATIC if PCMCIA != n && ISA |
114 | select PCCARD_PCI if PCMCIA !=n && !ISA | |
1da177e4 LT |
115 | help |
116 | This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge | |
117 | device, found in some older laptops and PCMCIA card readers. | |
118 | ||
119 | config I82092 | |
120 | tristate "i82092 compatible bridge support" | |
121 | depends on PCMCIA && PCI | |
02b03846 AC |
122 | select PCCARD_NONSTATIC if PCMCIA != n && ISA |
123 | select PCCARD_PCI if PCMCIA !=n && !ISA | |
1da177e4 LT |
124 | help |
125 | This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device, | |
126 | found in some older laptops and more commonly in evaluation boards for the | |
127 | chip. | |
128 | ||
129 | config I82365 | |
130 | tristate "i82365 compatible bridge support" | |
131 | depends on PCMCIA && ISA | |
132 | select PCCARD_NONSTATIC | |
133 | help | |
134 | Say Y here to include support for ISA-bus PCMCIA host bridges that | |
135 | are register compatible with the Intel i82365. These are found on | |
136 | older laptops and ISA-bus card readers for desktop systems. A | |
137 | "bridge" is the hardware inside your computer that PCMCIA cards are | |
138 | plugged into. If unsure, say N. | |
139 | ||
140 | config TCIC | |
141 | tristate "Databook TCIC host bridge support" | |
81000808 | 142 | depends on PCMCIA && ISA |
1da177e4 LT |
143 | select PCCARD_NONSTATIC |
144 | help | |
145 | Say Y here to include support for the Databook TCIC family of PCMCIA | |
146 | host bridges. These are only found on a handful of old systems. | |
147 | "Bridge" is the name used for the hardware inside your computer that | |
148 | PCMCIA cards are plugged into. If unsure, say N. | |
149 | ||
66213b3c ML |
150 | config PCMCIA_ALCHEMY_DEVBOARD |
151 | tristate "Alchemy Db/Pb1xxx PCMCIA socket services" | |
42a4f17d | 152 | depends on MIPS_ALCHEMY && PCMCIA |
66213b3c ML |
153 | help |
154 | Enable this driver of you want PCMCIA support on your Alchemy | |
64cd04d0 ML |
155 | Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300 |
156 | board. NOT suitable for the PB1000! | |
66213b3c ML |
157 | |
158 | This driver is also available as a module called db1xxx_ss.ko | |
159 | ||
0273b4ef ML |
160 | config PCMCIA_XXS1500 |
161 | tristate "MyCable XXS1500 PCMCIA socket support" | |
162 | depends on PCMCIA && MIPS_XXS1500 | |
0273b4ef ML |
163 | help |
164 | Support for the PCMCIA/CF socket interface on MyCable XXS1500 | |
165 | systems. | |
166 | ||
167 | This driver is also available as a module called xxs1500_ss.ko | |
168 | ||
553d6d5f MB |
169 | config PCMCIA_BCM63XX |
170 | tristate "bcm63xx pcmcia support" | |
171 | depends on BCM63XX && PCMCIA | |
172 | ||
0f767de6 | 173 | config PCMCIA_SOC_COMMON |
1bf8e621 | 174 | tristate |
0f767de6 | 175 | |
136b758b RK |
176 | config PCMCIA_SA11XX_BASE |
177 | tristate | |
178 | ||
1da177e4 LT |
179 | config PCMCIA_SA1100 |
180 | tristate "SA1100 support" | |
181 | depends on ARM && ARCH_SA1100 && PCMCIA | |
0f767de6 | 182 | select PCMCIA_SOC_COMMON |
136b758b | 183 | select PCMCIA_SA11XX_BASE |
1da177e4 LT |
184 | help |
185 | Say Y here to include support for SA11x0-based PCMCIA or CF | |
186 | sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/ | |
187 | Xscale(R) embedded machines. | |
188 | ||
189 | This driver is also available as a module called sa1100_cs. | |
190 | ||
191 | config PCMCIA_SA1111 | |
192 | tristate "SA1111 support" | |
11990b2b | 193 | depends on ARM && SA1111 && PCMCIA |
0f767de6 | 194 | select PCMCIA_SOC_COMMON |
11990b2b | 195 | select PCMCIA_SA11XX_BASE if ARCH_SA1100 |
f1674f21 | 196 | select PCMCIA_PXA2XX if ARCH_LUBBOCK && SA1111 |
1da177e4 LT |
197 | help |
198 | Say Y here to include support for SA1111-based PCMCIA or CF | |
199 | sockets, found on the Jornada 720, Graphicsmaster and other | |
200 | StrongARM(R)/Xscale(R) embedded machines. | |
201 | ||
202 | This driver is also available as a module called sa1111_cs. | |
203 | ||
204 | config PCMCIA_PXA2XX | |
205 | tristate "PXA2xx support" | |
206 | depends on ARM && ARCH_PXA && PCMCIA | |
35978408 | 207 | depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ |
cc513ac0 | 208 | || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ |
addff0fa | 209 | || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \ |
fd62999b | 210 | || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \ |
95244306 | 211 | || MACH_COLIBRI320 || MACH_H4700) |
0f767de6 | 212 | select PCMCIA_SOC_COMMON |
1da177e4 LT |
213 | help |
214 | Say Y here to include support for the PXA2xx PCMCIA controller | |
215 | ||
c9f50ddd DB |
216 | config PCMCIA_DEBUG |
217 | bool "Enable debugging" | |
218 | depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX) | |
219 | help | |
220 | Say Y here to enable debugging for the SoC PCMCIA layer. | |
221 | You will need to choose the debugging level either via the | |
222 | kernel command line, or module options depending whether | |
223 | you build the drivers as modules. | |
224 | ||
225 | The kernel command line options are: | |
226 | sa11xx_core.pc_debug=N | |
227 | pxa2xx_core.pc_debug=N | |
228 | ||
229 | The module option is called pc_debug=N | |
230 | ||
231 | In all the above examples, N is the debugging verbosity | |
232 | level. | |
233 | ||
1da177e4 LT |
234 | config PCMCIA_PROBE |
235 | bool | |
ea6add0b | 236 | default y if ISA && !ARCH_SA1100 && !PARISC |
1da177e4 LT |
237 | |
238 | config M32R_PCC | |
239 | bool "M32R PCMCIA I/F" | |
240 | depends on M32R && CHIP_M32700 && PCMCIA | |
241 | help | |
242 | Say Y here to use the M32R PCMCIA controller. | |
243 | ||
244 | config M32R_CFC | |
245 | bool "M32R CF I/F Controller" | |
934bb7f8 | 246 | depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT) |
1da177e4 LT |
247 | help |
248 | Say Y here to use the M32R CompactFlash controller. | |
249 | ||
250 | config M32R_CFC_NUM | |
251 | int "M32R CF I/F number" | |
252 | depends on M32R_CFC | |
934bb7f8 | 253 | default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT |
1da177e4 LT |
254 | help |
255 | Set the number of M32R CF slots. | |
256 | ||
257 | config PCMCIA_VRC4171 | |
258 | tristate "NEC VRC4171 Card Controllers support" | |
daaeb72b | 259 | depends on CPU_VR41XX && ISA && PCMCIA |
1da177e4 LT |
260 | |
261 | config PCMCIA_VRC4173 | |
262 | tristate "NEC VRC4173 CARDU support" | |
263 | depends on CPU_VR41XX && PCI && PCMCIA | |
264 | ||
f74e48a5 DB |
265 | config OMAP_CF |
266 | tristate "OMAP CompactFlash Controller" | |
267 | depends on PCMCIA && ARCH_OMAP16XX | |
268 | help | |
269 | Say Y here to support the CompactFlash controller on OMAP. | |
270 | Note that this doesn't support "True IDE" mode. | |
271 | ||
785e821e MH |
272 | config BFIN_CFPCMCIA |
273 | tristate "Blackfin CompactFlash PCMCIA Driver" | |
274 | depends on PCMCIA && BLACKFIN | |
275 | help | |
276 | Say Y here to support the CompactFlash PCMCIA driver for Blackfin. | |
277 | ||
278 | ||
2c1f3b7a AV |
279 | config AT91_CF |
280 | tristate "AT91 CompactFlash Controller" | |
ed9084ec | 281 | depends on PCMCIA && ARCH_AT91 |
98d67219 | 282 | depends on !ARCH_MULTIPLATFORM |
2c1f3b7a AV |
283 | help |
284 | Say Y here to support the CompactFlash controller on AT91 chips. | |
285 | Or choose M to compile the driver as a module named "at91_cf". | |
286 | ||
2b571a06 OJ |
287 | config ELECTRA_CF |
288 | tristate "Electra CompactFlash Controller" | |
289 | depends on PCMCIA && PPC_PASEMI | |
290 | help | |
291 | Say Y here to support the CompactFlash controller on the | |
292 | PA Semi Electra eval board. | |
293 | ||
02b03846 AC |
294 | config PCCARD_PCI |
295 | bool | |
296 | ||
1da177e4 | 297 | config PCCARD_NONSTATIC |
49b1153a | 298 | bool |
1da177e4 | 299 | |
3b27e942 DB |
300 | config PCCARD_IODYN |
301 | bool | |
302 | ||
1da177e4 | 303 | endif # PCCARD |